# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# INSTALLATION
#

# UDEV Rules for PlatformIO supported boards, http://platformio.org/boards
#
# The latest version of this file may be found at:
# 	https://github.com/platformio/platformio-core/blob/develop/scripts/99-platformio-udev.rules
#
# This file must be placed at:
# 	/etc/udev/rules.d/99-platformio-udev.rules    (preferred location)
#   	or
# 	/lib/udev/rules.d/99-platformio-udev.rules    (req'd on some broken systems)
#
# To install, type this command in a terminal:
# 	sudo cp 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
#
# Restart "udev" management tool:
#	sudo service udev restart
#		or
# 	sudo udevadm control --reload-rules
#	sudo udevadm trigger
#
# Ubuntu/Debian users may need to add own “username” to the “dialout” group if
# they are not “root”, doing this issuing a
#   sudo usermod -a -G dialout $USER
#   sudo usermod -a -G plugdev $USER
#
# After this file is installed, physically unplug and reconnect your board.

# CP210X USB UART
SUBSYSTEMS=="usb", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE:="0666"

# FT232R USB UART
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE:="0666"

# Prolific Technology, Inc. PL2303 Serial Port
SUBSYSTEMS=="usb", ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666"

# QinHeng Electronics HL-340 USB-Serial adapter
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666"

# Arduino boards
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][02]*", MODE:="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666"

# Arduino SAM-BA
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", ENV{MTP_NO_PROBE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666"

# Digistump boards
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1"

# STM32 discovery boards, with onboard st/linkv2
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="374?", MODE:="0666"

# USBtiny
SUBSYSTEMS=="usb", ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE="0666"

# USBasp V2.0
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666"

# Teensy boards
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", ENV{MTP_NO_PROBE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789]?", MODE:="0666"

#TI Stellaris Launchpad
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666"

#TI MSP430 Launchpad
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666"

# CMSIS-DAP compatible adapters
ATTRS{product}=="*CMSIS-DAP*", MODE="664", GROUP="plugdev"

# Black Magic Probe
SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server"
SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port"