Donc selon ton bureau, en adaptant le nom du paquet, tu peux faire un
Copicolles aussitot un retour d'erreur, au cas où.
Si tu ne suis pas tes mises à jour il est préférable de se remettre à jour auparavant :
Quand t'auras 5 minutes, Voir le tuto : Trop cool d'indiquer son installation dans son profil !
Et n'oublies pas les balises (commande, code...)]]>
alain@debian:~$ hp-levels
HP Linux Imaging and Printing System (ver. 3.16.11)
Supply Levels Utility ver. 2.0
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using device : hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
error: Unable to communicate with device (code=12): hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
error: Error opening device (Device not found). Exiting.
alain@debian:~$
et voilà ce que me donne hp-check
alain@debian:~$ hp-check
Saving output in log file: /home/alain/hp-check.log
HP Linux Imaging and Printing System (ver. 3.16.11)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 2-8.7 version is not supported. Using 2-8.6 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) GNU/Linux
Host: debian
Proc: 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) GNU/Linux
Distribution: 2 8.7
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.16.11
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 2 distro 8.7 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.16.11
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.16.11
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 03/12/17 14:26:06
version = 3.16.11
[last_used]
device_uri = hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = true
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1484859605
notify_upgrade = true
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
----------------------
| Scan Configuration |
----------------------
scanext Scan-SANE-Extension REQUIRED - 3.16.11 OK -
hpaio HPLIP-SANE-Backend REQUIRED - 3.16.11 OK 'hpaio found in /etc/sane.d/dll.conf'
--------------
| COMPILEDEP |
--------------
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.0 OK -
libtool libtool - Library building support services REQUIRED - 2.4.2 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 4.9.2 OK -
---------------------
| Python Extentions |
---------------------
hpmudext IO-Extension REQUIRED - 3.16.11 OK -
cupsext CUPS-Extension REQUIRED - 3.16.11 OK -
------------------------
| General Dependencies |
------------------------
sane SANE - Scanning library REQUIRED - 1.0.24 OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.2 OK -
python3-xml Python XML libraries REQUIRED - 2.1.0 OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 1.7.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.1.8 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.24 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 1.7.5 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.19' OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.6.0 OK -
cups-ddk CUPS DDK - CUPS driver development kit OPTIONAL - - OK -
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.0 OK -
libjpeg libjpeg - JPEG library REQUIRED - - OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.1 OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
-------------------------
| External Dependencies |
-------------------------
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.24 OK -
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.06 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
cups CUPS - Common Unix Printing System REQUIRED 1.1 1.7.5 OK 'CUPS Scheduler is running'
dbus DBus - Message bus system REQUIRED - 1.8.22 OK -
network network -wget OPTIONAL - 1.16 OK -
avahi-utils avahi-utils OPTIONAL - 0.6.31 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.998 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/net/envy_5530_series?ip=192.168.1.97&queue=false' is a Hewlett-Packard envy_5530_series all-in-one
device `v4l:/dev/video1' is a Noname Hauppauge WinTV-HVR1120 DVB-T/H virtual device
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
ENVY_5530
---------
Type: Printer
Device URI: hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
PPD: /etc/cups/ppd/ENVY_5530.ppd
PPD Description: HP Envy 5530 Series, hpcups 3.16.11
Printer status: printer ENVY_5530 disabled since dim. 12 mars 2017 14:03:30 CET - Unplugged or turned off
error: Unable to communicate with device (code=12): hp:/usb/ENVY_5530_series?serial=CN595530XD06BX
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 3
Total Warnings: 0
Done.
alain@debian:~$
message hplip :
device communication error (5012)
après plusieurs branchés / débranchés du cable usb sur ma carte usb 3.0 : pas mieux
branchement sur un port usb 2.0 de la carte mère : ok
finalement , j'ai paniqué pour rien . (apparemment)
Edit à toto :
Utilisation des balises Commande user en exemple pour que ce soit plus lisible sur le forum plutôt qu'avec quote qui sert aux citations :
et voilà ce que me donne hp-check
]]>