Messages de Watson

Watson · Matériel

Alors euh oui en effet, la carte graphique sur cet ordinateur n'est pas une Nvidia, sur celui-ci c'est la carte mère, je me suis mélangé, mea culpa.
J'ai essayé ta solution daufinsyd, j'ai donc fait :

sudo nano /etc/default/grub

Puis cherché la ligne que tu indiques et rajouté ce bout de ligne avant d'enregistrer le fichier et d'executer la commande :

sudo uptade-grub

J'ai redémarré et toujours le message

Failed to load kernel modules

avec toujours les mêmes lignes qui défilent.

Watson · Matériel

daufinsyd a écrit :

Du coup pour l'erreur

systemd[1]: Failed to start Load Kernel Modules.

le système ne puisse pas charger les modules nvidia puisque tu as une carte AMD

Ah bah oui, c'est vrai que maintenant que tu le dis... C'est pas faux.
Du coup, quoi faire ?

Watson · Matériel

daufinsyd a écrit :

euh ... anonyme et Watson vous avez échangé de compte ?
Ou bien c'est moi qui devient fou ? XD

Euh, bin non ci-dessous mon retour sur la commande que tu as demandé :

lspci -v

02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA controller])

  Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200]

  Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16

  Memory at e8000000 (32-bit, prefetchable) [size=128M]

  I/O ports at d800 [size=256]

  Memory at fda00000 (32-bit, non-prefetchable) [size=64K]

  Expansion ROM at 000c0000 [disabled] [size=128K]

  Capabilities: <access denied>

  Kernel driver in use: radeon

  Kernel modules: radeonfb, radeon

lspci -v

02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA controller])

  Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200]

  Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16

  Memory at e8000000 (32-bit, prefetchable) [size=128M]

  I/O ports at d800 [size=256]

  Memory at fda00000 (32-bit, non-prefetchable) [size=64K]

  Expansion ROM at 000c0000 [disabled] [size=128K]

  Capabilities: [58] AGP version 3.0

  Capabilities: [50] Power Management version 2

  Kernel driver in use: radeon

  Kernel modules: radeonfb, radeon

Watson · Matériel

La commande

lspci -v | grep VGA

ne donne qu'une seule ligne :

02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA controller])

Autrement, petite question en passant, j'ai la version "DFLinux" Debian Stretch RC, j'ai pu lire que la version stable était sortie, comment l'avoir ? Ça va me la proposer comme pour une mise à jour classique ou y a une manip' à faire ?

Watson · Matériel

otyugh a écrit :

Tu peux donne le retour de ?
systemd-analyze blame

4min 45.541s apt-daily-upgrade.service
2min 10.363s apt-daily.service
9.828s NetworkManager-wait-online.service
7.079s ModemManager.service
6.152s accounts-daemon.service
5.635s udisks2.service
5.452s dev-sda1.device
5.423s NetworkManager.service
3.850s systemd-logind.service
3.423s polkit.service
2.204s keyboard-setup.service
1.597s rsyslog.service
1.561s networking.service
1.474s lightdm.service
1.437s systemd-tmpfiles-setup-dev.service
1.194s systemd-random-seed.service
1.077s systemd-journal-flush.service
1.030s upower.service
932ms binfmt-support.service
804ms ntp.service
647ms avahi-daemon.service
621ms user@1000.service
553ms packagekit.service
481ms systemd-udev-trigger.service
467ms rtkit-daemon.service
422ms pppd-dns.service
392ms systemd-udevd.service
358ms console-setup.service
357ms systemd-tmpfiles-setup.service
313ms systemd-user-sessions.service
253ms systemd-remount-fs.service
208ms dev-hugepages.mount
205ms dev-mqueue.mount
201ms sys-kernel-debug.mount
194ms systemd-journald.service
193ms dev-disk-by\x2duuid-b8d2d313\x2dde90\x2d44d8\x2daa25\x2d829cc0bdd977.swap
182ms systemd-update-utmp.service
164ms systemd-sysctl.service
156ms kmod-static-nodes.service
117ms minissdpd.service
105ms proc-sys-fs-binfmt_misc.mount
46ms sys-fs-fuse-connections.mount
31ms alsa-restore.service
24ms systemd-update-utmp-runlevel.service
16ms systemd-modules-load.service

daufinsyd a écrit :

Hum, as tu touché aux drivers de ta carte graphique ?

Tu utilises lesquels ?

Je ne pense pas non, à moins que j'ai installé un truc qui me les ai modifié.
Comment savoir lesquels j'utilise ?

daufinsyd a écrit :

PS: pour voir où le pc pèche lors du démarrage

systemd-analyze critical-chain

graphical.target @25.725s
└─multi-user.target @25.725s
└─ntp.service @24.920s +804ms
└─network-online.target @24.865s
└─NetworkManager-wait-online.service @15.035s +9.828s
└─NetworkManager.service @9.582s +5.423s
└─dbus.service @8.668s
└─basic.target @8.665s
└─sockets.target @8.665s
└─uuidd.socket @8.664s
└─sysinit.target @8.624s
└─sys-fs-fuse-connections.mount @33.974s +46ms
└─system.slice @2.173s
└─-.slice @2.063s

Watson · Matériel

Un petit up du sujet

Watson · Installation et migration

Bonjour,

Je ne sais pas trop si je peux poster ici, mais j'ai trouvé un article qui pourrait t'intéresser sur les cahiers du débutant.
Dans l'article on te présente PlayOnLinux, (peut-être connais-tu ?), en gros il s'agit d'un petit logiciel qui te permet de faire tourner tes programmes Windows favoris sur ton Linux.
Ce logiciel intègre une bibliothèque avec une multitude d'installateur de programmes et jeux Windows, mais si tu ne trouve pas LE programme dans la bibliothèque tu peux très bien l'installer manuellement via PlayOnLinux, c'est très simple.
Je pense que cette solution serait plus intéressante pour toi, et plus simple, car réinstaller XP en dual boot juste pour 2-3 programmes, ça ne vaut peut-être pas le coup...

Watson · Matériel

Personne n'a d'idée ?

Watson · Matériel

Le retour de la commande journalctl -r -p err :

-- Logs begin at Sun 2017-06-11 12:42:26 CEST, end at Sun 2017-06-11 12:47:06 CEST. --
juin 11 12:43:00 debian pulseaudio[1310]: [pulseaudio] pid.c: Daemon already running.
juin 11 12:42:34 debian avahi-daemon[315]: chroot.c: open() failed: No such file or directory
juin 11 12:42:29 debian systemd[1]: Failed to start Load Kernel Modules.
juin 11 12:42:29 debian systemd-modules-load[299]: Failed to insert 'nvidia_drm': Operation not permitted
juin 11 12:42:29 debian systemd-modules-load[299]: Error running install command for nvidia_drm
juin 11 12:42:26 debian systemd[1]: Failed to start Load Kernel Modules.
juin 11 12:42:26 debian systemd-modules-load[167]: Failed to insert 'nvidia_drm': Operation not permitted
juin 11 12:42:26 debian systemd-modules-load[167]: Error running install command for nvidia_drm
juin 11 12:42:26 debian kernel: Failed to find cpu0 device node

Et dmesg -l err donne le fameux

[ 1.436028] Failed to find cpu0 device node

Et enfin le résultat de la commande dmesg -k qui permet d'afficher les messages du noyau, avec en gras le "Failed to find cpu0" :

[    0.000000] Linux version 4.9.0-3-686 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-1 (2017-06-04)

[    0.000000] x86/fpu: Legacy x87 FPU detected.

[    0.000000] x86/fpu: Using 'eager' FPU context switches.

[    0.000000] e820: BIOS-provided physical RAM map:

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffcffff] usable

[    0.000000] BIOS-e820: [mem 0x000000003ffd0000-0x000000003ffdefff] ACPI data

[    0.000000] BIOS-e820: [mem 0x000000003ffdf000-0x000000003fffffff] ACPI NVS

[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[    0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved

[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!

[    0.000000] SMBIOS 2.3 present.

[    0.000000] DMI: Compaq Presario 061 DT276A-ABF S5295FR FR340/A7N8X-LA, BIOS 3.07    10/15/2003

[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[    0.000000] e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x100000

[    0.000000] MTRR default type: uncachable

[    0.000000] MTRR fixed ranges enabled:

[    0.000000]   00000-9FFFF write-back

[    0.000000]   A0000-FFFFF uncachable

[    0.000000] MTRR variable ranges enabled:

[    0.000000]   0 base 000000000 mask FC0000000 write-back

[    0.000000]   1 disabled

[    0.000000]   2 disabled

[    0.000000]   3 disabled

[    0.000000]   4 disabled

[    0.000000]   5 disabled

[    0.000000]   6 disabled

[    0.000000]   7 disabled

[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  

[    0.000000] initial memory mapped: [mem 0x00000000-0x0bbfffff]

[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384

[    0.000000] BRK [0x0b92f000, 0x0b92ffff] PGTABLE

[    0.000000] RAMDISK: [mem 0x352f9000-0x36973fff]

[    0.000000] ACPI: Early table checksum verification disabled

[    0.000000] ACPI: RSDP 0x00000000000FAA80 000014 (v00 ACPIAM)

[    0.000000] ACPI: RSDT 0x000000003FFD0000 000030 (v01 A M I  OEMRSDT  10000315 MSFT 00000097)

[    0.000000] ACPI: FACP 0x000000003FFD0200 000081 (v02 A M I  OEMFACP  10000315 MSFT 00000097)

[    0.000000] ACPI: DSDT 0x000000003FFD03F0 0036C7 (v01 A7N8X  A7N8X000 00000000 INTL 02002026)

[    0.000000] ACPI: FACS 0x000000003FFDF000 000040

[    0.000000] ACPI: APIC 0x000000003FFD0390 00005E (v01 A M I  OEMAPIC  10000315 MSFT 00000097)

[    0.000000] ACPI: OEMB 0x000000003FFDF040 000041 (v01 A M I  OEMBIOS  10000315 MSFT 00000097)

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] 135MB HIGHMEM available.

[    0.000000] 887MB LOWMEM available.

[    0.000000]   mapped low ram: 0 - 377fe000

[    0.000000]   low ram: 0 - 377fe000

[    0.000000] Zone ranges:

[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]

[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]

[    0.000000]   HighMem  [mem 0x00000000377fe000-0x000000003ffcffff]

[    0.000000] Movable zone start for each node

[    0.000000] Early memory node ranges

[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]

[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffcffff]

[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffcffff]

[    0.000000] On node 0 totalpages: 261998

[    0.000000] free_area_init_node: node 0, pgdat cb7b9880, node_mem_map f6efe024

[    0.000000]   DMA zone: 36 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 3998 pages, LIFO batch:0

[    0.000000]   Normal zone: 1962 pages used for memmap

[    0.000000]   Normal zone: 223230 pages, LIFO batch:31

[    0.000000]   HighMem zone: 34770 pages, LIFO batch:7

[    0.000000] Using APIC driver default

[    0.000000] Nvidia board detected. Ignoring ACPI timer override.

[    0.000000] If you got timer trouble try acpi_use_timer_override

[    0.000000] ACPI: PM-Timer IO Port: 0x4008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] ACPI: IRQ14 used by override.

[    0.000000] ACPI: IRQ15 used by override.

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs

[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]

[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices

[    0.000000] Booting paravirtualized kernel on bare hardware

[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns

[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1

[    0.000000] percpu: Embedded 19 pages/cpu @f6ee8000 s47948 r0 d29876 u77824

[    0.000000] pcpu-alloc: s47948 r0 d29876 u77824 alloc=19*4096

[    0.000000] pcpu-alloc: [0] 0 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260000

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-686 root=UUID=bc86fec9-fb93-4cac-a76f-449649ffee7c ro initrd=/install/gtk/initrd.gz quiet

[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Initializing CPU#0

[    0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0)

[    0.000000] Initializing Movable for node 0 (00000000:00000000)

[    0.000000] Memory: 1005384K/1047992K available (5675K kernel code, 636K rwdata, 1696K rodata, 712K init, 452K bss, 42608K reserved, 0K cma-reserved, 139080K highmem)

[    0.000000] virtual kernel memory layout:

                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)

                   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)

                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)

                     .init : 0xcb7d6000 - 0xcb888000   ( 712 kB)

                     .data : 0xcb58b285 - 0xcb7d4300   (2340 kB)

                     .text : 0xcb000000 - 0xcb58b285   (5676 kB)

[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[    0.000000] Hierarchical RCU implementation.

[    0.000000]  Build-time adjustment of leaf fanout to 32.

[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1

[    0.000000] NR_IRQS:2304 nr_irqs:256 16

[    0.000000] CPU 0 irqstacks, hard=f4c2e000 soft=f4c30000

[    0.000000] Console: colour VGA+ 80x25

[    0.000000] console [tty0] enabled

[    0.000000] tsc: Fast TSC calibration using PIT

[    0.000000] tsc: Detected 1830.016 MHz processor

[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 3660.03 BogoMIPS (lpj=7320064)

[    0.004020] pid_max: default: 32768 minimum: 301

[    0.004064] ACPI: Core revision 20160831

[    0.013596] ACPI: 1 ACPI AML tables successfully acquired and loaded

[    0.013664] Security Framework initialized

[    0.013667] Yama: disabled by default; enable with sysctl kernel.yama.*

[    0.013680] AppArmor: AppArmor disabled by boot time parameter

[    0.013707] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.013710] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)

[    0.014258] mce: CPU supports 4 MCE banks

[    0.014282] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0

[    0.014283] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0

[    0.019978] Freeing SMP alternatives memory: 24K (cb888000 - cb88e000)

[    0.021972] ftrace: allocating 23642 entries in 47 pages

[    0.032196] smpboot: Max logical packages: 1

[    0.032207] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.032664] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1

[    0.076000] smpboot: CPU0: AMD Athlon(tm) XP  2500+ (family: 0x6, model: 0xa, stepping: 0x0)

[    0.076000] Performance Events: AMD PMU driver.

[    0.076000] ... version:                0

[    0.076000] ... bit width:              48

[    0.076000] ... generic registers:      4

[    0.076000] ... value mask:             0000ffffffffffff

[    0.076000] ... max period:             00007fffffffffff

[    0.076000] ... fixed-purpose events:   0

[    0.076000] ... event mask:             000000000000000f

[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

[    0.076000] x86: Booted up 1 node, 1 CPUs

[    0.076000] smpboot: Total of 1 processors activated (3660.03 BogoMIPS)

[    0.076000] devtmpfs: initialized

[    0.076000] PM: Registering ACPI NVS region [mem 0x3ffdf000-0x3fffffff] (135168 bytes)

[    0.076000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns

[    0.076000] futex hash table entries: 256 (order: 2, 16384 bytes)

[    0.076000] pinctrl core: initialized pinctrl subsystem

[    0.076000] NET: Registered protocol family 16

[    0.076000] cpuidle: using governor ladder

[    0.076000] cpuidle: using governor menu

[    0.076000] ACPI: bus type PCI registered

[    0.076000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[    0.077004] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2

[    0.077005] PCI: Using configuration type 1 for base access

[    0.079040] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[    0.079568] ACPI: Added _OSI(Module Device)

[    0.079569] ACPI: Added _OSI(Processor Device)

[    0.079571] ACPI: Added _OSI(3.0 _SCP Extensions)

[    0.079572] ACPI: Added _OSI(Processor Aggregator Device)

[    0.079876] ACPI: Executed 1 blocks of module-level executable AML code

[    0.083144] ACPI: Interpreter enabled

[    0.083184] ACPI: (supports S0 S1 S3 S4 S5)

[    0.083186] ACPI: Using IOAPIC for interrupt routing

[    0.083242] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[    0.092350] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[    0.092360] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]

[    0.092367] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM

[    0.092373] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.

[    0.092460] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)

[    0.092462] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)

[    0.092465] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)

[    0.092467] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)

[    0.092470] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xff7bffff window] (ignored)

[    0.092471] PCI: root bus 00: using default resources

[    0.092722] PCI host bridge to bus 0000:00

[    0.092725] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]

[    0.092728] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]

[    0.092731] pci_bus 0000:00: root bus resource [bus 00-ff]

[    0.092748] pci 0000:00:00.0: [10de:01e0] type 00 class 0x060000

[    0.092759] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]

[    0.092783] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup

[    0.092921] pci 0000:00:00.1: [10de:01ea] type 00 class 0x050000

[    0.093064] pci 0000:00:00.2: [10de:01ee] type 00 class 0x050000

[    0.093204] pci 0000:00:00.3: [10de:01ed] type 00 class 0x050000

[    0.093339] pci 0000:00:00.4: [10de:01ec] type 00 class 0x050000

[    0.093478] pci 0000:00:00.5: [10de:01ef] type 00 class 0x050000

[    0.093618] pci 0000:00:01.0: [10de:0060] type 00 class 0x060100

[    0.093817] pci 0000:00:01.1: [10de:0064] type 00 class 0x0c0500

[    0.093831] pci 0000:00:01.1: reg 0x10: [io  0xec00-0xec1f]

[    0.093895] pci 0000:00:01.1: PME# supported from D3hot D3cold

[    0.094042] pci 0000:00:02.0: [10de:0067] type 00 class 0x0c0310

[    0.094056] pci 0000:00:02.0: reg 0x10: [mem 0xfe900000-0xfe900fff]

[    0.094119] pci 0000:00:02.0: supports D1 D2

[    0.094121] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.094181] pci 0000:00:02.0: System wakeup disabled by ACPI

[    0.094273] pci 0000:00:02.1: [10de:0067] type 00 class 0x0c0310

[    0.094287] pci 0000:00:02.1: reg 0x10: [mem 0xfea00000-0xfea00fff]

[    0.094350] pci 0000:00:02.1: supports D1 D2

[    0.094352] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold

[    0.094407] pci 0000:00:02.1: System wakeup disabled by ACPI

[    0.094499] pci 0000:00:02.2: [10de:0068] type 00 class 0x0c0320

[    0.094514] pci 0000:00:02.2: reg 0x10: [mem 0xfeb00000-0xfeb000ff]

[    0.094584] pci 0000:00:02.2: supports D1 D2

[    0.094586] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold

[    0.094672] pci 0000:00:02.2: System wakeup disabled by ACPI

[    0.094770] pci 0000:00:04.0: [10de:0066] type 00 class 0x020000

[    0.094784] pci 0000:00:04.0: reg 0x10: [mem 0xfe800000-0xfe800fff]

[    0.094793] pci 0000:00:04.0: reg 0x14: [io  0xe880-0xe887]

[    0.094850] pci 0000:00:04.0: supports D1 D2

[    0.094852] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.094909] pci 0000:00:04.0: System wakeup disabled by ACPI

[    0.095002] pci 0000:00:06.0: [10de:006a] type 00 class 0x040100

[    0.095017] pci 0000:00:06.0: reg 0x10: [io  0xe000-0xe0ff]

[    0.095025] pci 0000:00:06.0: reg 0x14: [io  0xef00-0xef7f]

[    0.095034] pci 0000:00:06.0: reg 0x18: [mem 0xfe600000-0xfe600fff]

[    0.095084] pci 0000:00:06.0: supports D1 D2

[    0.095209] pci 0000:00:08.0: [10de:006c] type 01 class 0x060400

[    0.095297] pci 0000:00:08.0: System wakeup disabled by ACPI

[    0.095388] pci 0000:00:09.0: [10de:0065] type 00 class 0x01018a

[    0.095426] pci 0000:00:09.0: reg 0x20: [io  0xffa0-0xffaf]

[    0.095444] pci 0000:00:09.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]

[    0.095446] pci 0000:00:09.0: legacy IDE quirk: reg 0x14: [io  0x03f6]

[    0.095448] pci 0000:00:09.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]

[    0.095450] pci 0000:00:09.0: legacy IDE quirk: reg 0x1c: [io  0x0376]

[    0.095598] pci 0000:00:0d.0: [10de:006e] type 00 class 0x0c0010

[    0.095613] pci 0000:00:0d.0: reg 0x10: [mem 0xfe500000-0xfe5007ff]

[    0.095622] pci 0000:00:0d.0: reg 0x14: [mem 0xfe400000-0xfe40003f]

[    0.095678] pci 0000:00:0d.0: supports D1 D2

[    0.095680] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.095736] pci 0000:00:0d.0: System wakeup disabled by ACPI

[    0.095846] pci 0000:00:1e.0: [10de:01e8] type 01 class 0x060400

[    0.096095] pci 0000:00:08.0: PCI bridge to [bus 01]

[    0.096164] pci 0000:02:00.0: [1002:5961] type 00 class 0x030000

[    0.096180] pci 0000:02:00.0: reg 0x10: [mem 0xe8000000-0xefffffff pref]

[    0.096189] pci 0000:02:00.0: reg 0x14: [io  0xd800-0xd8ff]

[    0.096198] pci 0000:02:00.0: reg 0x18: [mem 0xfda00000-0xfda0ffff]

[    0.096226] pci 0000:02:00.0: reg 0x30: [mem 0xfd900000-0xfd91ffff pref]

[    0.096260] pci 0000:02:00.0: supports D1 D2

[    0.096350] pci 0000:02:00.1: [1002:5941] type 00 class 0x038000

[    0.096365] pci 0000:02:00.1: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]

[    0.096373] pci 0000:02:00.1: reg 0x14: [mem 0xfd800000-0xfd80ffff]

[    0.096433] pci 0000:02:00.1: supports D1 D2

[    0.096543] pci 0000:00:1e.0: PCI bridge to [bus 02]

[    0.096547] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]

[    0.096551] pci 0000:00:1e.0:   bridge window [mem 0xfd500000-0xfdafffff]

[    0.096555] pci 0000:00:1e.0:   bridge window [mem 0xd5400000-0xf53fffff pref]

[    0.096565] pci_bus 0000:00: on NUMA node 0

[    0.097551] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *11

[    0.097694] ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.

[    0.097834] ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *0, disabled.

[    0.097973] ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled.

[    0.098111] ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled.

[    0.098244] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *5

[    0.098377] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *5

[    0.098511] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5

[    0.098655] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *3

[    0.098794] ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled.

[    0.098928] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11

[    0.099062] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.

[    0.099196] ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10

[    0.099332] ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *11

[    0.099470] ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled.

[    0.099626] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14

[    0.099964] vgaarb: setting as boot device: PCI:0000:02:00.0

[    0.099967] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none

[    0.099968] vgaarb: loaded

[    0.099970] vgaarb: bridge control possible 0000:02:00.0

[    0.100180] PCI: Using ACPI for IRQ routing

[    0.100184] PCI: pci_cache_line_size set to 32 bytes

[    0.100228] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]

[    0.100231] e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff]

[    0.100604] clocksource: Switched to clocksource refined-jiffies

[    0.115717] VFS: Disk quotas dquot_6.6.0

[    0.115755] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.115957] pnp: PnP ACPI init

[    0.116152] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)

[    0.116764] pnp 00:01: [dma 3]

[    0.116989] pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)

[    0.117355] system 00:02: [io  0x04d0-0x04d1] has been reserved

[    0.117359] system 00:02: [io  0x4000-0x40ff window] has been reserved

[    0.117362] system 00:02: [io  0x4300-0x437f window] has been reserved

[    0.117364] system 00:02: [io  0x4100-0x41ff window] has been reserved

[    0.117367] system 00:02: [io  0x4200-0x42ff window] has been reserved

[    0.117372] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.117541] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved

[    0.117544] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved

[    0.117547] system 00:03: [mem 0xff780000-0xff7bffff] has been reserved

[    0.117551] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.117668] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)

[    0.117861] system 00:05: [io  0x0480-0x04ff] could not be reserved

[    0.117866] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[    0.118361] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)

[    0.118609] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved

[    0.118612] system 00:07: [mem 0x000c0000-0x000dffff] could not be reserved

[    0.118615] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved

[    0.118618] system 00:07: [mem 0x00100000-0x3fffffff] could not be reserved

[    0.118621] system 00:07: [mem 0xff7c0000-0xffffffff] has been reserved

[    0.118625] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)

[    0.119074] pnp: PnP ACPI: found 8 devices

[    0.119077] PnPBIOS: Disabled

[    0.157572] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns

[    0.157593] clocksource: Switched to clocksource acpi_pm

[    0.157621] pci 0000:00:08.0: PCI bridge to [bus 01]

[    0.157636] pci 0000:00:1e.0: PCI bridge to [bus 02]

[    0.157639] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]

[    0.157644] pci 0000:00:1e.0:   bridge window [mem 0xfd500000-0xfdafffff]

[    0.157648] pci 0000:00:1e.0:   bridge window [mem 0xd5400000-0xf53fffff pref]

[    0.157655] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]

[    0.157657] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]

[    0.157660] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]

[    0.157663] pci_bus 0000:02: resource 1 [mem 0xfd500000-0xfdafffff]

[    0.157665] pci_bus 0000:02: resource 2 [mem 0xd5400000-0xf53fffff pref]

[    0.157780] NET: Registered protocol family 2

[    0.158085] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[    0.158137] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[    0.158227] TCP: Hash tables configured (established 8192 bind 8192)

[    0.158337] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.158357] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.158444] NET: Registered protocol family 1

[    0.158811] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22

[    0.240333] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21

[    0.332320] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20

[    0.332460] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]

[    0.332466] PCI: CLS 64 bytes, default 32

[    0.332587] Unpacking initramfs...

[    1.052291] Freeing initrd memory: 23020K (f52f9000 - f6974000)

[    1.053122] audit: initializing netlink subsys (disabled)

[    1.053169] audit: type=2000 audit(1497177739.051:1): initialized

[    1.053719] workingset: timestamp_bits=14 max_order=18 bucket_order=4

[    1.053756] zbud: loaded

[    1.054925] bounce: pool size: 64 pages

[    1.054948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)

[    1.054997] io scheduler noop registered

[    1.054998] io scheduler deadline registered

[    1.055020] io scheduler cfq registered (default)

[    1.055249] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    1.055263] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    1.055438] GHES: HEST is not enabled!

[    1.055501] isapnp: Scanning for PnP cards...

[    1.409879] isapnp: No Plug & Play device found

[    1.410014] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    1.430599] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[    1.431279] Linux agpgart interface v0.103

[    1.431435] agpgart: Detected NVIDIA nForce2 chipset

[    1.435795] agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xf8000000

[b][u][    1.436028] Failed to find cpu0 device node[/b][/u]

[    1.436073] Unable to detect cache hierarchy from DT for CPU 0

[    1.436163] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[    1.436165] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[    1.437067] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.437311] mousedev: PS/2 mouse device common for all mice

[    1.437398] rtc_cmos 00:00: RTC can wake from S4

[    1.437587] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0

[    1.437615] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram

[    1.437669] ledtrig-cpu: registered to indicate activity on CPUs

[    1.438550] NET: Registered protocol family 10

[    1.438941] mip6: Mobile IPv6

[    1.438945] NET: Registered protocol family 17

[    1.438949] mpls_gso: MPLS GSO support

[    1.439164] microcode: AMD CPU family 0x6 not supported

[    1.439170] Using IPI No-Shortcut mode

[    1.439416] registered taskstats version 1

[    1.439438] zswap: loaded using pool lzo/zbud

[    1.439523] ima: No TPM chip found, activating TPM-bypass!

[    1.439931] rtc_cmos 00:00: setting system clock to 2017-06-11 10:42:19 UTC (1497177739)

[    1.440044] PM: Hibernation image not present or could not be loaded.

[    1.440945] Freeing unused kernel memory: 712K (cb7d6000 - cb888000)

[    1.440997] Write protecting the kernel text: 5680k

[    1.441039] Write protecting the kernel read-only data: 1700k

[    1.459215] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[    1.471121] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.471480] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.472853] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.473022] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.473055] random: systemd-udevd: uninitialized urandom read (16 bytes read)

[    1.475052] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.475840] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.475991] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.476228] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.476404] random: udevadm: uninitialized urandom read (16 bytes read)

[    1.557667] i2c i2c-0: nForce2 SMBus adapter at 0x4300

[    1.557725] i2c i2c-1: nForce2 SMBus adapter at 0x4340

[    1.562839] ACPI: bus type USB registered

[    1.562900] usbcore: registered new interface driver usbfs

[    1.562926] usbcore: registered new interface driver hub

[    1.569676] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

[    1.570022] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22

[    1.575908] SCSI subsystem initialized

[    1.578201] usbcore: registered new device driver usb

[    1.579360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.580534] ehci-pci: EHCI PCI platform driver

[    1.582202] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.601335] libata version 3.00 loaded.

[    2.080070] tsc: Refined TSC clocksource calibration: 1830.001 MHz

[    2.080079] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1a60de46ee4, max_idle_ns: 440795205046 ns

[    2.100911] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:0e:a6:05:5c:49

[    2.100915] forcedeth 0000:00:04.0: timirq lnktim desc-v1

[    2.101330] ehci-pci 0000:00:02.2: EHCI Host Controller

[    2.101342] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1

[    2.101357] ehci-pci 0000:00:02.2: debug port 1

[    2.101407] ehci-pci 0000:00:02.2: cache line size of 64 is not supported

[    2.101433] ehci-pci 0000:00:02.2: irq 20, io mem 0xfeb00000

[    2.102878] forcedeth 0000:00:04.0 enp0s4: renamed from eth0

[    2.116036] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00

[    2.116167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.116170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.116172] usb usb1: Product: EHCI Host Controller

[    2.116174] usb usb1: Manufacturer: Linux 4.9.0-3-686 ehci_hcd

[    2.116176] usb usb1: SerialNumber: 0000:00:02.2

[    2.116478] hub 1-0:1.0: USB hub found

[    2.116494] hub 1-0:1.0: 6 ports detected

[    2.117351] ACPI: PCI Interrupt Link [LFWR] enabled at IRQ 21

[    2.117925] ohci-pci: OHCI PCI platform driver

[    2.176080] firewire_ohci 0000:00:0d.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x0

[    2.176299] pata_amd 0000:00:09.0: version 0.4.1

[    2.179480] scsi host0: pata_amd

[    2.179894] scsi host1: pata_amd

[    2.180054] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14

[    2.180056] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

[    2.180564] ohci-pci 0000:00:02.0: OHCI PCI host controller

[    2.180575] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2

[    2.180638] ohci-pci 0000:00:02.0: irq 22, io mem 0xfe900000

[    2.242090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[    2.242093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.242096] usb usb2: Product: OHCI PCI host controller

[    2.242098] usb usb2: Manufacturer: Linux 4.9.0-3-686 ohci_hcd

[    2.242100] usb usb2: SerialNumber: 0000:00:02.0

[    2.242837] hub 2-0:1.0: USB hub found

[    2.242853] hub 2-0:1.0: 3 ports detected

[    2.243249] ohci-pci 0000:00:02.1: OHCI PCI host controller

[    2.243259] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 3

[    2.243297] ohci-pci 0000:00:02.1: irq 21, io mem 0xfea00000

[    2.302082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001

[    2.302085] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.302087] usb usb3: Product: OHCI PCI host controller

[    2.302089] usb usb3: Manufacturer: Linux 4.9.0-3-686 ohci_hcd

[    2.302091] usb usb3: SerialNumber: 0000:00:02.1

[    2.302785] hub 3-0:1.0: USB hub found

[    2.302801] hub 3-0:1.0: 3 ports detected

[    2.420561] ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100

[    2.420566] ata1.00: 390721968 sectors, multi 16: LBA48 

[    2.420578] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c0c0) ACPI=0x3f01f (17:900:0x11)

[    2.444467] ata1.00: configured for UDMA/100

[    2.444765] scsi 0:0:0:0: Direct-Access     ATA      ST3200822A       3.01 PQ: 0 ANSI: 5

[    2.607115] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616E, F503, max UDMA/33

[    2.607126] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-248F, R601, max UDMA/33

[    2.607136] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c0c0) ACPI=0x701f (54:54:0x15)

[    2.607140] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c0c0) ACPI=0x701f (54:54:0x15)

[    2.609739] ata2.00: configured for UDMA/33

[    2.614494] ata2.01: configured for UDMA/33

[    2.615643] scsi 1:0:0:0: CD-ROM            SAMSUNG  DVD-ROM SD-616E  F503 PQ: 0 ANSI: 5

[    2.626809] scsi 1:0:1:0: CD-ROM            SAMSUNG  CD-R/RW SW-248F  R601 PQ: 0 ANSI: 5

[    2.637192] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)

[    2.637294] sd 0:0:0:0: [sda] Write Protect is off

[    2.637299] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.637342] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.644674] sr 1:0:0:0: [sr0] scsi3-mmc drive: 1x/40x cd/rw xa/form2 cdda tray

[    2.644679] cdrom: Uniform CD-ROM driver Revision: 3.20

[    2.645664] sr 1:0:0:0: Attached scsi CD-ROM sr0

[    2.657627] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray

[    2.658317] sr 1:0:1:0: Attached scsi CD-ROM sr1

[    2.688250] firewire_core 0000:00:0d.0: created device fw0: GUID 0046485200e01800, S400

[    2.716248]  sda: sda1 sda2 < sda5 >

[    2.717783] sd 0:0:0:0: [sda] Attached SCSI disk

[    2.764038] usb 2-3: new full-speed USB device number 2 using ohci-pci

[    2.994970] usb 2-3: New USB device found, idVendor=1130, idProduct=1704

[    2.994975] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[    2.994977] usb 2-3: Product: 2.4G Wireless Optical Mouse

[    3.002070] hidraw: raw HID events driver (C) Jiri Kosina

[    3.009260] usbcore: registered new interface driver usbhid

[    3.009263] usbhid: USB HID core driver

[    3.011545] input: 2.4G Wireless Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:1130:1704.0001/input/input1

[    3.012093] hid-generic 0003:1130:1704.0001: input,hidraw0: USB HID v1.10 Mouse [2.4G Wireless Optical Mouse] on usb-0000:00:02.0-3/input0

[    3.104092] clocksource: Switched to clocksource tsc

[    3.416287] random: fast init done

[    3.708933] PM: Starting manual resume from disk

[    3.708941] PM: Hibernation image partition 8:5 present

[    3.708942] PM: Looking for hibernation image.

[    3.709273] PM: Image not found (code -22)

[    3.709275] PM: Hibernation image not present or could not be loaded.

[    3.979019] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[    5.852200] ip_tables: (C) 2000-2006 Netfilter Core Team

[    6.268037] random: crng init done

[    7.908022] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

[    8.539653] lp: driver loaded but no devices found

[    8.573896] ppdev: user-space parallel port driver

[    8.604131] parport_pc 00:01: reported by Plug and Play ACPI

[    8.604284] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]

[    8.700183] lp0: using parport0 (interrupt-driven).

[   10.267071] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2

[   10.267080] ACPI: Power Button [PWRB]

[   10.267205] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3

[   10.267208] ACPI: Power Button [PWRF]

[   10.505543] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20

[   10.545616] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   10.545702] sr 1:0:0:0: Attached scsi generic sg1 type 5

[   10.545782] sr 1:0:1:0: Attached scsi generic sg2 type 5

[   10.844034] snd_intel8x0 0000:00:06.0: intel8x0_measure_ac97_clock: measured 59917 usecs (2904 samples)

[   10.844039] snd_intel8x0 0000:00:06.0: clocking to 48000

[   10.847618] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   11.149020] input: PC Speaker as /devices/platform/pcspkr/input/input4

[   12.036344] [drm] Initialized

[   12.644647] Adding 1047548k swap on /dev/sda5.  Priority:-1 extents:1 across:1047548k FS

[   14.183616] [drm] radeon kernel modesetting enabled.

[   14.184989] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16

[   14.185879] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x1002:0x2002 0x01).

[   14.185900] [drm] register mmio base: 0xFDA00000

[   14.185901] [drm] register mmio size: 65536

[   14.187030] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge

[   14.187042] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode

[   14.187082] radeon 0000:02:00.0: putting AGP V3 device into 8x mode

[   14.187089] radeon 0000:02:00.0: GTT: 64M 0xF8000000 - 0xFBFFFFFF

[   14.187094] [drm] Generation 2 PCI interface, using max accessible memory

[   14.187099] radeon 0000:02:00.0: VRAM: 128M 0x00000000E8000000 - 0x00000000EFFFFFFF (128M used)

[   14.187112] [drm] Detected VRAM RAM=128M, BAR=128M

[   14.187113] [drm] RAM width 64bits DDR

[   14.187226] [TTM] Zone  kernel: Available graphics memory: 445030 kiB

[   14.187228] [TTM] Zone highmem: Available graphics memory: 514570 kiB

[   14.187229] [TTM] Initializing pool allocator

[   14.187278] [drm] radeon: 128M of VRAM memory ready

[   14.187280] [drm] radeon: 64M of GTT memory ready.

[   14.191112] radeon 0000:02:00.0: WB disabled

[   14.191121] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x00000000f8000000 and cpu addr 0xf8062000

[   14.191125] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

[   14.191125] [drm] Driver supports precise vblank timestamp query.

[   14.191160] [drm] radeon: irq initialized.

[   14.191179] [drm] Loading R200 Microcode

[   14.632725] radeon 0000:02:00.0: firmware: direct-loading firmware radeon/R200_cp.bin

[   14.633014] [drm] radeon: ring at 0x00000000F8001000

[   14.633040] [drm] ring test succeeded in 0 usecs

[   14.633261] [drm] ib test succeeded in 0 usecs

[   14.634266] [drm] Radeon Display Connectors

[   14.634269] [drm] Connector 0:

[   14.634269] [drm]   VGA-1

[   14.634272] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60

[   14.634272] [drm]   Encoders:

[   14.634273] [drm]     CRT1: INTERNAL_DAC1

[   14.634275] [drm] Connector 1:

[   14.634275] [drm]   SVIDEO-1

[   14.634276] [drm]   Encoders:

[   14.634277] [drm]     TV1: INTERNAL_DAC2

[   14.693521] [drm] fb mappable at 0xE8040000

[   14.693525] [drm] vram apper at 0xE8000000

[   14.693526] [drm] size 5242880

[   14.693527] [drm] fb depth is 24

[   14.693528] [drm]    pitch is 5120

[   14.694297] fbcon: radeondrmfb (fb0) is primary device

[   14.772641] Console: switching to colour frame buffer device 160x64

[   14.795285] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device

[   14.807494] [drm] Initialized radeon 2.48.0 20080528 for 0000:02:00.0 on minor 0

[   23.672300] IPv6: ADDRCONF(NETDEV_UP): enp0s4: link is not ready

[   37.508812] fuse init (API version 7.26)

Watson · Matériel

Ah parfait, justement je me demandais s'il y avait un moyen d'avoir les logs de ces messages d'erreur pour les reporter ici.
Je teste ça demain et je poste le résultat de la commande dans la foulée, directement depuis l'ordinateur maintenant que Firefox fonctionne.

Watson · Réseau

Bin ouais mais je n'avais pas installé d'extension ni rien sur le profil par défaut vu que j'ai installé Debian il y a seulement 2 jours et Firefox dès le début ne fonctionnait pas.
Bref. Le résultat est là à présent Firefox fonctionne parfaitement bien et je l'ai même correctement optimisé.

Merci encore.

Watson · Matériel

Du nouveau, aujourd'hui je démarre l'ordinateur et pleins de gentils petits messages apparaissent !
En premier
failed to find cpu0 device node
Puis /dv/sd1 clean, (pas eu le temps de noter la suite)

Et maintenant :

failed to start load kernel modules [...]
see systemctl status [...]

Et pleins de messages qui commencent par [OK] en vert.

Malgré tout l'ordinateur démarre, et 1 min 15 sec après avoir appuyé sur le bouton, je me retrouve dans la session.

Watson · Gestion des paquets Debian

Bon, alors j'ai désinstallé puis réinstallé correctement avec les bons paquets et tout, j'ai essayé de lancer steam via terminal utilisateur et toujours le même message, du coup ça m'a saoulé, je l'ai re-désinstallé, pour de bon. Tant pis pour Steam, de toute façon, oui je me doute bien qu'il n'y aurait eu qu'une petite quantité de jeux compatibles avec l'ordinateur. Donc c'est pas la peine de s'embêter.
En tout cas je vous remercie d'avoir essayé de chercher une solution.

Watson · Réseau

daufinsyd a écrit :

Salut,

À tout hasard essaye de créer un nouveau profil firefox pour voir si c,a marche

Dans un terminal
firefox -p

puis crée un nouveau profil.

Tu utilises quelle version de Firefox ?

Eh bien il faut croire que le problème venait de là, j'ai crée un nouveau profil avec mon nom d'utilisateur, validé, lancé Firefox et... Ça marche !
Du coup j'ai supprimé le profil "Default", vu que de toute façon je ne pouvais pas lancer Firefox avec, j'ai bien fait ?

En tout cas, un grand merci à vous 2.

Watson · Gestion des paquets Debian

Alors euh, tout d'abord bonsoir et merci de vos réponses, je vais juste rebondir sur ça :

anonyme a écrit :

il faut supprimer tout ce que tu a installé , et purger les dossiers /fichiers "steam" dans ton home.
avoir un driver vidéo fonctionnel qui supporte le i386

Là je pense que c'est le mieux en effet, tout virer et recommencer proprement.
Comment désinstaller steam et ses dépendances au mieux ?

Ensuite, une fois Steam bien désinstallé, un de vous deux peut-il me donner les étapes pour le ré-installer correctement, (les paquets nécessaire, etc.) ? Avec les commandes si possible ?

Autrement voici quelques infos complémentaires sur l'ordinateur en question :
Processeur AMD Athlon XP 2500 +, 1.83 GHz
1Go de Ram
Carte graphique NVidia
Et le Linux installé est bien un Debian Strech en 32 bits.

Watson · Gestion des paquets Debian

Illegal instruction
cat: '/home/jean-pierre/ .steam/ubuntu12_32/steam-runtime.tar.xz.part*': Aucun fichier ou dossier de ce type
tar: Ceci ne ressemble pas à une archive de type "tar"
xz : (stdin) : Format de fichier inconnu
tar: Child returned status 1
tar: Error is not recoverable: exiting now
find: '/home/jean-pierre/ .steam/ubuntu12_32/steam-runtime' : Aucun fichier ou dossier de ce type

Edit : il y a maintenant dans /home 2 dossier .steam, (.steam_old et .steam).
Dans chacun de ces dossiers il y a 2 fichiers, un steam et un steam-runtime.tar.xz

Watson · Gestion des paquets Debian

Illegal instruction
tar: Ceci ne ressemble pas à une archive de type "tar"
xz : (stdin) : Format de fichier inconnu
tar: Child returned status 1
tar: Error is not recoverable: exiting now
find: '/home/jean-pierre/ .steam/ubuntu12_32/steam-runtime' : Aucun fichier ou dossier de ce type

Je l'ai bien installé comme dans la doc de ton lien avec la commande

apt-get update && apt-get install steam

Watson · Matériel

anonyme a écrit :

un exemple => https://forum.ubuntu-fr.org/viewtopic.php?id=2006694

Oui justement j'avais trouvé ce sujet, mais n'étant pas plus avancé, je voulais essayer de voir si sur ce forum il y avait quelqu'un qui avait une réponse à ce petit désagrément.

Et en effet il s'agit d'une machine assez ancienne, milieu des années 2000 je dirais, (même si j'en sais trop rien car acheté d'occasion), le processeur est un AMD Ahtlon XP 2500 +, 1,83GHz.

Watson · Matériel

Pas sûr d'être au bon endroit...
Dernier petit problème, lors du démarrage de l'ordinateur j'ai un message d'erreur qui apparaît :

failed to find cpu0 device node

Il apparaît une première fois en gros, puis une seconde fois en plus petit avant de disparaître et de démarrer normalement le système.
Ensuite tout fonctionne comme ça devrait.

Après une brève recherche sur Google j'ai vu que je n'étais pas le seul à avoir ce problème mais n'ai pas trouvé de solution à ce petit désagrément.
Est-ce que quelqu'un sur ce forum a une idée de ce à quoi correspond ce message d'erreur ? Si oui, quelle incidence a t'il ? Et surtout existe t'il un moyen de corriger ceci ?

J'ai essayé d'installer Lubuntu y a 2-3 jours et je n'avais pas ce message avec.

D'avance, merci pour votre attention.

Watson · Gestion des paquets Debian

Bonjour,

J'ai un problème avec le programme Steam, j'ai beau cliquer autant de fois que je veux sur l'icône, rien ne se passe, même pas un petit rapport d'erreur...
D'où peut venir le problème ?

Watson · Réseau

Bonjour,

Un petit problème avec Firefox ;
Je ne parviens pas à l'ouvrir...
Je double clique sur l’icône de ce dernier et aussitôt j'ai le message d'erreur suivant qui apparaît :

We're Sorry
Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
To help us, blablabla...

Quelqu'un aurait une idée ?

Watson · Installation et migration

J'ai copier/coller le résultat de la commande

whoami

dans lightdm.conf, j'ai validé, redémarré et... Ça fonctionne !
Merci à toi, un problème en moins !

Watson · Installation et migration

Eh bien ça donne :

/usr/sbin/lightdm

Je viens de remettre le fichier lightdm.conf par défaut, comme il était avant que j'y touche

Watson · Installation et migration

jean-pierre@debian:~$ cat /etc/lightdm/lightdm.conf

#

# General configuration

#

# start-default-seat = True to always start one seat if none are defined in the configuration

# greeter-user = User to run greeter as

# minimum-display-number = Minimum display number to use for X servers

# minimum-vt = First VT to run displays on

# lock-memory = True to prevent memory from being paged to disk

# user-authority-in-system-dir = True if session authority should be in the system location

# guest-account-script = Script to be run to setup guest account

# logind-load-seats = True to automatically set up multi-seat configuration from logind

# logind-check-graphical = True to on start seats that are marked as graphical by logind

# log-directory = Directory to log information to

# run-directory = Directory to put running state in

# cache-directory = Directory to cache to

# sessions-directory = Directory to find sessions

# remote-sessions-directory = Directory to find remote sessions

# greeters-directory = Directory to find greeters

#

[LightDM]

#start-default-seat=true

#greeter-user=lightdm

#minimum-display-number=0

#minimum-vt=7

#lock-memory=true

#user-authority-in-system-dir=false

#guest-account-script=guest-account

#logind-load-seats=false

#logind-check-graphical=false

#log-directory=/var/log/lightdm

#run-directory=/var/run/lightdm

#cache-directory=/var/cache/lightdm

#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions

#remote-sessions-directory=/usr/share/lightdm/remote-sessions

#greeters-directory=/usr/share/lightdm/greeters:/usr/share/xgreeters

#

# Seat defaults

#

# type = Seat type (xlocal, xremote)

# xdg-seat = Seat name to set pam_systemd XDG_SEAT variable and name to pass to X server

# pam-service = PAM service to use for login

# pam-autologin-service = PAM service to use for autologin

# pam-greeter-service = PAM service to use for greeters

# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)

# xserver-layout = Layout to pass to X server

# xserver-config = Config file to pass to X server

# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server

# xserver-share = True if the X server is shared for both greeter and session

# xserver-hostname = Hostname of X server (only for type=xremote)

# xserver-display-number = Display number of X server (only for type=xremote)

# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)

# xdmcp-port = XDMCP UDP/IP port to communicate on

# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)

# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)

# unity-compositor-timeout = Number of seconds to wait for compositor to start

# greeter-session = Session to load for greeter

# greeter-hide-users = True to hide the user list

# greeter-allow-guest = True if the greeter should show a guest login option

# greeter-show-manual-login = True if the greeter should offer a manual login option

# greeter-show-remote-login = True if the greeter should offer a remote login option

# user-session = Session to load for users

# allow-user-switching = True if allowed to switch users

# allow-guest = True if guest login is allowed

# guest-session = Session to load for guests (overrides user-session)

# session-wrapper = Wrapper script to run session with

# greeter-wrapper = Wrapper script to run greeter with

# guest-wrapper = Wrapper script to run guest sessions with

# display-setup-script = Script to run when starting a greeter session (runs as root)

# display-stopped-script = Script to run after stopping the display server (runs as root)

# greeter-setup-script = Script to run when starting a greeter (runs as root)

# session-setup-script = Script to run when starting a user session (runs as root)

# session-cleanup-script = Script to run when quitting a user session (runs as root)

# autologin-guest = True to log in as guest by default

# autologin-user =Jean-Pierre

# autologin-user-timeout =0

# autologin-session =Jean-Pierre

# autologin-in-background = True if autologin session should not be immediately activated

# exit-on-failure = True if the daemon should exit if this seat fails

#

[SeatDefaults]

#type=xlocal

#xdg-seat=seat0

#pam-service=lightdm

#pam-autologin-service=lightdm-autologin

#pam-greeter-service=lightdm-greeter

#xserver-command=X

#xserver-layout=

#xserver-config=

#xserver-allow-tcp=false

#xserver-share=true

#xserver-hostname=

#xserver-display-number=

#xdmcp-manager=

#xdmcp-port=177

#xdmcp-key=

#unity-compositor-command=unity-system-compositor

#unity-compositor-timeout=60

#greeter-session=example-gtk-gnome

greeter-hide-users=false

#greeter-allow-guest=true

#greeter-show-manual-login=false

#greeter-show-remote-login=true

#user-session=default

#allow-user-switching=true

#allow-guest=true

#guest-session=xfce4

#session-wrapper=lightdm-session

#greeter-wrapper=

#guest-wrapper=

#display-setup-script=

#display-stopped-script=

#greeter-setup-script=

#session-setup-script=

#session-cleanup-script=

#autologin-guest=false

autologin-user=Jean-Pierre

autologin-user-timeout=0

pam-service=lightdm-autologin

#autologin-user-timeout=0

#autologin-in-background=false

#autologin-session=UNIMPLEMENTED

#exit-on-failure=false

#

# Seat configuration

#

# Each seat must start with "Seat:".

# Uses settings from [SeatDefaults], any of these can be overriden by setting them in this section.

#

#[Seat:0]

#

# XDMCP Server configuration

#

# enabled = True if XDMCP connections should be allowed

# port = UDP/IP port to listen for connections on

# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)

#

# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively

# it can be a word and the first 7 characters are used as the key.

#

[XDMCPServer]

#enabled=false

#port=177

#key=

#

# VNC Server configuration

#

# enabled = True if VNC connections should be allowed

# command = Command to run Xvnc server with

# port = TCP/IP port to listen for connections on

# width = Width of display to use

# height = Height of display to use

# depth = Color depth of display to use

#

[VNCServer]

#enabled=false

#command=Xvnc

#port=5900

#width=1024

#height=768

#depth=8

Watson · Installation et migration

Résultat : bash: /etc/lightdm/lightdm.conf: Permission non accordée

Debian-facile

#1 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 24-06-2017 17:22:16

#2 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 22-06-2017 15:12:35

#3 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 22-06-2017 11:29:58

#4 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 21-06-2017 09:11:37

#5 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 20-06-2017 12:43:50

#6 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 20-06-2017 10:39:23

#7 Re : Installation et migration » Installation en dual boot » 15-06-2017 11:12:04

#8 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 13-06-2017 21:10:14

#9 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 11-06-2017 12:10:54

#10 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 10-06-2017 18:13:18

#11 Re : Réseau » [Résolu] Firefox crash à l'ouverture » 10-06-2017 18:09:48

#12 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 10-06-2017 15:47:34

#13 Re : Gestion des paquets Debian » [Résolu] Steam ne fonctionne pas » 10-06-2017 11:53:11

#14 Re : Réseau » [Résolu] Firefox crash à l'ouverture » 10-06-2017 08:10:30

#15 Re : Gestion des paquets Debian » [Résolu] Steam ne fonctionne pas » 09-06-2017 20:38:48

#16 Re : Gestion des paquets Debian » [Résolu] Steam ne fonctionne pas » 09-06-2017 11:16:00

#17 Re : Gestion des paquets Debian » [Résolu] Steam ne fonctionne pas » 09-06-2017 08:51:01

#18 Re : Matériel » Message d'erreur au démarrage de l'ordinateur » 09-06-2017 08:32:58

#19 Matériel » Message d'erreur au démarrage de l'ordinateur » 08-06-2017 12:45:12

#20 Gestion des paquets Debian » [Résolu] Steam ne fonctionne pas » 08-06-2017 12:36:44

#21 Réseau » [Résolu] Firefox crash à l'ouverture » 08-06-2017 12:33:59

#22 Re : Installation et migration » [Résolu] Supprimer le login » 08-06-2017 12:27:26

#23 Re : Installation et migration » [Résolu] Supprimer le login » 08-06-2017 11:17:47

#24 Re : Installation et migration » [Résolu] Supprimer le login » 08-06-2017 10:06:58

#25 Re : Installation et migration » [Résolu] Supprimer le login » 08-06-2017 09:35:30

Pied de page des forums