logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 Re : Matériel » Debian stretch - carte graphique ES1000 » 16-05-2018 19:46:25

Sylsun
Bonsoir èfpé, je vais essayer LXDE. En effet l'ecran ne parait pas etre reconnu (d'ailleurs il est marqué inconnu). Que puis je faire pour cela ? cela aiderait ?
Merci

#2 Re : Matériel » Debian stretch - carte graphique ES1000 » 15-05-2018 16:50:42

Sylsun
Bonsoir : autre question, y a t'il une possibilité que la "mémoire" graphique soit surchargée ... Parfois (comme en ce moment où je fais des tests) la fluidité est meilleure ... Sur la même vidéo, parfois je n'ai pas de décalage video/son, alors que j'en avais hier ...

#3 Re : Matériel » Debian stretch - carte graphique ES1000 » 15-05-2018 15:47:08

Sylsun
Bonjour à vous,
merci pour vos réponses.
D'abord voici le résultat demandé par éfpé : moniteur DELL 17'' REV A03

dream@debian:~$ xrandr --verbose
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096
VGA-0 connected primary 1280x1024+0+0 (0x278) normal (normal left inverted right x axis y axis) 0mm x 0mm
  Identifier: 0x40
  Timestamp:  25698
  Subpixel:   no subpixels
  Gamma:      1.0:1.0:1.0
  Brightness: 1.0
  Clones:    
  CRTC:       0
  CRTCs:      0
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  TearFree: auto
    supported: off, on, auto
  load detection: 1
    range: (0, 1)
  1024x768 (0x42) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  800x600 (0x43) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x44) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  848x480 (0x45) 33.750MHz +HSync +VSync
        h: width   848 start  864 end  976 total 1088 skew    0 clock  31.02KHz
        v: height  480 start  486 end  494 total  517           clock  60.00Hz
  640x480 (0x46) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  1280x1024_60.00 (0x278) 108.880MHz -HSync +VSync *current
        h: width  1280 start 1360 end 1496 total 1712 skew    0 clock  63.60KHz
        v: height 1024 start 1025 end 1028 total 1060           clock  60.00Hz




Alors en effet mon écran n'étant pas reconnu au niveau résolution, je lance un resolution.sh au démarrage :

xrandr --newmode $(gtf 1280 1024 60 | sed -ne 's/"//g;s/ Modeline //p')
xrandr --addmode VGA-0 1280x1024_60.00



Et j'ai un câble VGA très long qui posait souci je crois avant que je crée resolution.sh ...

#4 Re : Matériel » Debian stretch - carte graphique ES1000 » 13-05-2018 20:37:50

Sylsun
Bonsoir èfpé, une mise à niveau matérielle est compliquée car il faut que je trouve quelqu'un pour cela ... Mais si il n'ya pas d'autres solutions ...
Voici les résultats des commandes

dream@debian:~$ lspci -k | grep -iA3 vga

0e:0d.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] ES1000 (rev 02)
  Subsystem: Dell ES1000
  Kernel driver in use: radeon
  Kernel modules: radeonfb, radeon
dream@debian:~$ glxinfo -B
name of display: :0
libGL error: failed to create dri screen
libGL error: failed to load driver: radeon
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: VMware, Inc. (0xffffffff)
    Device: llvmpipe (LLVM 3.9, 128 bits) (0xffffffff)
    Version: 13.0.6
    Accelerated: no
    Video memory: 32174MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.0
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.9, 128 bits)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 13.0.6
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 13.0.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.0 Mesa 13.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00



dream@debian:~$ cat /var/log/Xorg.0.log
[     8.245]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[     8.245] X Protocol Version 11, Revision 0
[     8.245] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[     8.245] Current Operating System: Linux debian 4.9.0-6-amd64 #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) x86_64
[     8.245] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=8f858cd1-aa79-4afd-a3e7-222aef1ce6c6 ro quiet
[     8.245] Build Date: 16 October 2017  08:19:45AM
[     8.245] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support)
[     8.245] Current version of pixman: 0.34.0
[     8.245]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     8.245] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.245] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 13 13:01:27 2018
[     8.246] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.247] (==) No Layout section.  Using the first Screen section.
[     8.248] (==) No screen section available. Using defaults.
[     8.248] (**) |-->Screen "Default Screen Section" (0)
[     8.248] (**) |   |-->Monitor "<default monitor>"
[     8.249] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     8.249] (==) Automatically adding devices
[     8.249] (==) Automatically enabling devices
[     8.249] (==) Automatically adding GPU devices
[     8.249] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     8.253] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     8.253]  Entry deleted from font path.
[     8.255] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     8.255] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.255] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.255] (II) Loader magic: 0x565299f92e00
[     8.255] (II) Module ABI versions:
[     8.255]  X.Org ANSI C Emulation: 0.4
[     8.255]  X.Org Video Driver: 23.0
[     8.255]  X.Org XInput driver : 24.1
[     8.255]  X.Org Server Extension : 10.0
[     8.255] (++) using VT number 7

[     8.256] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     8.256] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.262] (--) PCI:*(0:14:13:0) 1002:515e:1028:01b3 rev 2, Mem @ 0xd8000000/134217728, 0xfc2d0000/65536, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072
[     8.262] (II) LoadModule: "glx"
[     8.264] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.277] (II) Module glx: vendor="X.Org Foundation"
[     8.277]  compiled for 1.19.2, module version = 1.0.0
[     8.277]  ABI class: X.Org Server Extension, version 10.0
[     8.277] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[     8.277]  loading driver: radeon
[     8.277] (==) Matched radeon as autoconfigured driver 0
[     8.277] (==) Matched ati as autoconfigured driver 1
[     8.277] (==) Matched ati as autoconfigured driver 2
[     8.277] (==) Matched modesetting as autoconfigured driver 3
[     8.277] (==) Matched fbdev as autoconfigured driver 4
[     8.277] (==) Matched vesa as autoconfigured driver 5
[     8.277] (==) Assigned the driver to the xf86ConfigLayout
[     8.277] (II) LoadModule: "radeon"
[     8.278] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[     8.283] (II) Module radeon: vendor="X.Org Foundation"
[     8.283]  compiled for 1.19.2, module version = 18.0.1
[     8.283]  Module class: X.Org Video Driver
[     8.283]  ABI class: X.Org Video Driver, version 23.0
[     8.283] (II) LoadModule: "ati"
[     8.283] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[     8.283] (II) Module ati: vendor="X.Org Foundation"
[     8.283]  compiled for 1.19.2, module version = 18.0.1
[     8.283]  Module class: X.Org Video Driver
[     8.283]  ABI class: X.Org Video Driver, version 23.0
[     8.284] (II) LoadModule: "modesetting"
[     8.284] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     8.285] (II) Module modesetting: vendor="X.Org Foundation"
[     8.285]  compiled for 1.19.2, module version = 1.19.2
[     8.285]  Module class: X.Org Video Driver
[     8.285]  ABI class: X.Org Video Driver, version 23.0
[     8.285] (II) LoadModule: "fbdev"
[     8.285] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     8.286] (II) Module fbdev: vendor="X.Org Foundation"
[     8.286]  compiled for 1.19.0, module version = 0.4.4
[     8.286]  Module class: X.Org Video Driver
[     8.286]  ABI class: X.Org Video Driver, version 23.0
[     8.286] (II) LoadModule: "vesa"
[     8.286] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     8.287] (II) Module vesa: vendor="X.Org Foundation"
[     8.287]  compiled for 1.19.0, module version = 2.3.4
[     8.287]  Module class: X.Org Video Driver
[     8.287]  ABI class: X.Org Video Driver, version 23.0
[     8.287] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
  ATI Radeon 9800PRO, ATI Radeon 9800XT,
  ATI Radeon Mobility 9600/9700 (M10/M11),
  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
  ATI FireGL V3350, ATI Mobility Radeon X1450,
  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
  ATI FireGL V3400, ATI Mobility FireGL V5250,
  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
  ATI FireGL V3600, ATI Radeon HD 2600 LE,
  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
  AMD Radeon HD 6300 Series Graphics,
  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
  AMD Firestream 9350, ATI Radeon HD 5800 Series,
  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
  MULLINS, KAVERI, HAWAII
[     8.291] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     8.291] (II) FBDEV: driver for framebuffer: fbdev
[     8.291] (II) VESA: driver for VESA chipsets: vesa
[     8.300] (II) [KMS] Kernel modesetting enabled.
[     8.300] (WW) Falling back to old probe method for modesetting
[     8.300] (WW) Falling back to old probe method for fbdev
[     8.300] (II) Loading sub module "fbdevhw"
[     8.300] (II) LoadModule: "fbdevhw"
[     8.300] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     8.301] (II) Module fbdevhw: vendor="X.Org Foundation"
[     8.301]  compiled for 1.19.2, module version = 0.0.2
[     8.301]  ABI class: X.Org Video Driver, version 23.0
[     8.301] (WW) Falling back to old probe method for vesa
[     8.301] (II) RADEON(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     8.301] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[     8.301] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[     8.301] (==) RADEON(0): Default visual is TrueColor
[     8.301] (==) RADEON(0): RGB weight 888
[     8.301] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[     8.301] (--) RADEON(0): Chipset: "ATI ES1000" (ChipID = 0x515e)
[     8.301] (II) Loading sub module "fb"
[     8.301] (II) LoadModule: "fb"
[     8.301] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.303] (II) Module fb: vendor="X.Org Foundation"
[     8.303]  compiled for 1.19.2, module version = 1.0.0
[     8.303]  ABI class: X.Org ANSI C Emulation, version 0.4
[     8.303] (II) Loading sub module "dri2"
[     8.303] (II) LoadModule: "dri2"
[     8.303] (II) Module "dri2" already built-in
[     8.303] (II) Loading sub module "exa"
[     8.303] (II) LoadModule: "exa"
[     8.303] (II) Loading /usr/lib/xorg/modules/libexa.so
[     8.305] (II) Module exa: vendor="X.Org Foundation"
[     8.305]  compiled for 1.19.2, module version = 2.6.0
[     8.305]  ABI class: X.Org Video Driver, version 23.0
[     8.305] (II) RADEON(0): KMS Color Tiling: disabled
[     8.305] (II) RADEON(0): KMS Color Tiling 2D: disabled
[     8.305] (==) RADEON(0): TearFree property default: auto
[     8.305] (II) RADEON(0): KMS Pageflipping: enabled
[     8.305] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[     8.308] (II) RADEON(0): Output VGA-0 has no monitor section
[     8.310] (II) RADEON(0): EDID for output VGA-0
[     8.310] (II) RADEON(0): Printing probed modes for output VGA-0
[     8.310] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     8.310] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     8.310] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     8.310] (II) RADEON(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[     8.310] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     8.310] (II) RADEON(0): Output VGA-0 connected
[     8.310] (II) RADEON(0): Using exact sizes for initial modes
[     8.310] (II) RADEON(0): Output VGA-0 using initial mode 1024x768 +0+0
[     8.310] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:1000000 visible:3f00000
[     8.310] (II) RADEON(0): EXA: Driver will not allow EXA pixmaps in VRAM
[     8.310] (==) RADEON(0): DPI set to (96, 96)
[     8.310] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.310] (II) Loading sub module "ramdac"
[     8.310] (II) LoadModule: "ramdac"
[     8.310] (II) Module "ramdac" already built-in
[     8.310] (II) UnloadModule: "modesetting"
[     8.310] (II) Unloading modesetting
[     8.310] (II) UnloadModule: "fbdev"
[     8.310] (II) Unloading fbdev
[     8.310] (II) UnloadSubModule: "fbdevhw"
[     8.310] (II) Unloading fbdevhw
[     8.310] (II) UnloadModule: "vesa"
[     8.310] (II) Unloading vesa
[     8.311] (--) Depth 24 pixmap format is 32 bpp
[     8.311] (II) RADEON(0): [DRI2] Setup complete
[     8.311] (II) RADEON(0): [DRI2]   DRI driver: radeon
[     8.311] (II) RADEON(0): Front buffer size: 3072K
[     8.311] (II) RADEON(0): VRAM usage limit set to 55281K
[     8.313] (==) RADEON(0): DRI3 disabled
[     8.313] (==) RADEON(0): Backing store enabled
[     8.313] (II) RADEON(0): Direct rendering enabled
[     8.313] (II) EXA(0): Driver allocated offscreen pixmaps
[     8.313] (II) EXA(0): Driver registered support for the following operations:
[     8.313] (II)         Solid
[     8.313] (II)         Copy
[     8.313] (II)         UploadToScreen
[     8.313] (II)         DownloadFromScreen
[     8.313] (II) RADEON(0): Acceleration enabled
[     8.313] (==) RADEON(0): DPMS enabled
[     8.313] (==) RADEON(0): Silken mouse enabled
[     8.314] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.315] (--) RandR disabled
[     8.319] (II) SELinux: Disabled on system
[     8.343] (EE) AIGLX error: Calling driver entry point failed
[     8.345] (EE) AIGLX: reverting to software rendering
[     8.565] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[     8.565] (II) IGLX: Loaded and initialized swrast
[     8.565] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     8.566] (II) RADEON(0): Setting screen physical size to 270 x 203
[     8.800] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     8.800] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.800] (II) LoadModule: "libinput"
[     8.800] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     8.807] (II) Module libinput: vendor="X.Org Foundation"
[     8.807]  compiled for 1.19.0, module version = 0.23.0
[     8.807]  Module class: X.Org XInput Driver
[     8.807]  ABI class: X.Org XInput driver, version 24.1
[     8.807] (II) Using input driver 'libinput' for 'Power Button'
[     8.807] (**) Power Button: always reports core events
[     8.807] (**) Option "Device" "/dev/input/event3"
[     8.807] (**) Option "_source" "server/udev"
[     8.808] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     8.808] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     8.828] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event3"
[     8.828] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.828] (**) Option "xkb_model" "pc105"
[     8.828] (**) Option "xkb_layout" "fr"
[     8.828] (**) Option "xkb_variant" "latin9"
[     8.854] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     8.855] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     8.855] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event0)
[     8.855] (**) Dell Dell USB Keyboard: Applying InputClass "libinput keyboard catchall"
[     8.855] (II) Using input driver 'libinput' for 'Dell Dell USB Keyboard'
[     8.856] (**) Dell Dell USB Keyboard: always reports core events
[     8.856] (**) Option "Device" "/dev/input/event0"
[     8.856] (**) Option "_source" "server/udev"
[     8.856] (II) input device 'Dell Dell USB Keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     8.856] (II) input device 'Dell Dell USB Keyboard', /dev/input/event0 is a keyboard
[     8.892] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1:1.0/0003:413C:2003.0001/input/input3/event0"
[     8.892] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD, id 7)
[     8.892] (**) Option "xkb_model" "pc105"
[     8.892] (**) Option "xkb_layout" "fr"
[     8.892] (**) Option "xkb_variant" "latin9"
[     8.892] (II) input device 'Dell Dell USB Keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     8.892] (II) input device 'Dell Dell USB Keyboard', /dev/input/event0 is a keyboard
[     8.893] (II) config/udev: Adding input device GeneralPlus USB Audio Device (/dev/input/event1)
[     8.893] (**) GeneralPlus USB Audio Device: Applying InputClass "libinput keyboard catchall"
[     8.893] (II) Using input driver 'libinput' for 'GeneralPlus USB Audio Device'
[     8.893] (**) GeneralPlus USB Audio Device: always reports core events
[     8.893] (**) Option "Device" "/dev/input/event1"
[     8.893] (**) Option "_source" "server/udev"
[     8.894] (II) input device 'GeneralPlus USB Audio Device', /dev/input/event1 is tagged by udev as: Keyboard
[     8.894] (II) input device 'GeneralPlus USB Audio Device', /dev/input/event1 is a keyboard
[     8.924] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2:1.3/0003:1B3F:2008.0002/input/input4/event1"
[     8.924] (II) XINPUT: Adding extended input device "GeneralPlus USB Audio Device" (type: KEYBOARD, id 8)
[     8.924] (**) Option "xkb_model" "pc105"
[     8.924] (**) Option "xkb_layout" "fr"
[     8.924] (**) Option "xkb_variant" "latin9"
[     8.924] (II) input device 'GeneralPlus USB Audio Device', /dev/input/event1 is tagged by udev as: Keyboard
[     8.925] (II) input device 'GeneralPlus USB Audio Device', /dev/input/event1 is a keyboard
[     8.926] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event2)
[     8.926] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[     8.926] (II) Using input driver 'libinput' for 'PIXART USB OPTICAL MOUSE'
[     8.926] (**) PIXART USB OPTICAL MOUSE: always reports core events
[     8.926] (**) Option "Device" "/dev/input/event2"
[     8.926] (**) Option "_source" "server/udev"
[     8.926] (II) input device 'PIXART USB OPTICAL MOUSE', /dev/input/event2 is tagged by udev as: Mouse
[     8.926] (II) Device 'PIXART USB OPTICAL MOUSE' set to 1000 DPI
[     8.926] (II) input device 'PIXART USB OPTICAL MOUSE', /dev/input/event2 is a pointer caps
[     8.956] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4.4/1-4.4.4:1.0/0003:093A:2510.0003/input/input5/event2"
[     8.956] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 9)
[     8.956] (**) Option "AccelerationScheme" "none"
[     8.956] (**) PIXART USB OPTICAL MOUSE: (accel) selected scheme none/0
[     8.956] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[     8.956] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[     8.957] (II) input device 'PIXART USB OPTICAL MOUSE', /dev/input/event2 is tagged by udev as: Mouse
[     8.957] (II) Device 'PIXART USB OPTICAL MOUSE' set to 1000 DPI
[     8.957] (II) input device 'PIXART USB OPTICAL MOUSE', /dev/input/event2 is a pointer caps
[     8.957] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[     8.957] (II) No input driver specified, ignoring this device.
[     8.958] (II) This device may have been added with another device file.
[     8.958] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[     8.958] (II) No input driver specified, ignoring this device.
[     8.958] (II) This device may have been added with another device file.
[    50.388] (II) RADEON(0): Allocate new frame buffer 1280x1024 stride 1280
[    50.399] (II) RADEON(0): VRAM usage limit set to 53438K



root@debian:/home/dream# dmesg | grep -i firmware

[    0.252569] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.261306] acpi PNP0A08:00: PCIe AER handled by firmware
[    0.374005] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    0.794532] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[    0.937489] megaraid_sas 0000:01:00.0: firmware supports msix  : (0)
[    1.048017] megaraid_sas 0000:01:00.0: MR_DCMD_PD_LIST_QUERY failed/not supported by firmware
[    1.076019] megaraid_sas 0000:01:00.0: DCMD not supported by firmware - megasas_ld_list_query 4369
[    1.104027] megaraid_sas 0000:01:00.0: firmware crash dump : no
[    5.230106] radeon 0000:0e:0d.0: firmware: direct-loading firmware radeon/R100_cp.bin
[    6.633358] bnx2 0000:03:00.0: firmware: direct-loading firmware bnx2/bnx2-mips-06-6.2.3.fw
[    6.633695] bnx2 0000:03:00.0: firmware: direct-loading firmware bnx2/bnx2-rv2p-06-6.0.15.fw
root@debian:/home/dream# dmesg | grep -i dmi:
[    0.000000] DMI: Dell Inc. PowerEdge 1950/0TT740, BIOS 2.7.0 10/30/2010



kernal_panic.gif

#5 Re : Matériel » Debian stretch - carte graphique ES1000 » 13-05-2018 12:28:27

Sylsun
Bonjour èfpé, merci pour ton aide. Ai je donc un espoir ... ? Dois je copier le résultat de ces commandes ?
Merci, bon dimanche

#6 Matériel » Debian stretch - carte graphique ES1000 » 12-05-2018 12:06:37

Sylsun
Réponses : 15
Bonjour,

après avoir changé d'environnement (cf mon post https://debian-facile.org/viewtopic.php?id=21013) je pensais mon problème résolu.
Mais non, j'ai toujours un affichage saccadé, la parole décalée de l'image sur les videos ...

Je ne trouve pas de solution, je pense que j'ai un probleme de pilote.

#7 Re : Cinnamon » cinnamon en mode rendu logiciel sans acceleration materielle - RESOLU » 20-03-2018 17:47:46

Sylsun
Parfait Mate ; j'ai un message bref de résolution CRTC63 puis tout se cale impecable. Et tout me parait enfin fluide ! Encore un grand merci

#8 Re : Cinnamon » cinnamon en mode rendu logiciel sans acceleration materielle - RESOLU » 20-03-2018 17:19:39

Sylsun
Je te remercie beaucoup @hyrr0 ; j'ai installé Xfce, mais  malgré ma sélection au démarrage il reste sur Cinnamon. .Par contre j'ai un 3e choix : "Cinnamon software" et là aucun message erreur ; mais cela reste très lent. je vais donc essayer Mate ...

#9 Re : Cinnamon » cinnamon en mode rendu logiciel sans acceleration materielle - RESOLU » 20-03-2018 16:27:59

Sylsun
Merci ; cela aussi est déjà installé

firmware-linux-nonfree is already the newest version (20161130-3).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 1 non mis à jour.




Changer Cinnamon pourquoi pas ... mais où fait on cela ? scratchhead.gif

Edit à toto : mis les lignes codes en utilisant le (gros) bouton Autre code du forum pour que ce soit plus lisible par tous.

#10 Re : Cinnamon » cinnamon en mode rendu logiciel sans acceleration materielle - RESOLU » 20-03-2018 15:48:43

Sylsun
Voici le résultat @hyrro

libgl1-mesa-dri is already the newest version (13.0.6-1+b2).
libgl1-mesa-dri passé en « installé manuellement ».
xserver-xorg-video-ati is already the newest version (1:7.8.0-1+b1).
xserver-xorg-video-ati passé en « installé manuellement ».
firmware-linux is already the newest version (20161130-3).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 1 non mis à jour.

Je redémarre ?

#11 Re : Cinnamon » cinnamon en mode rendu logiciel sans acceleration materielle - RESOLU » 20-03-2018 14:53:29

Sylsun
Bonjour @hyrro, voici

libGL error: failed to create dri screen
libGL error: failed to load driver: radeon
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.9, 128 bits)
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fog_distance,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,

#12 Cinnamon » cinnamon en mode rendu logiciel sans acceleration materielle - RESOLU » 20-03-2018 13:21:48

Sylsun
Réponses : 12
Bonjour,

Je suis assez nouvelle sur Debian. J'ai une carte AMD/ATI Es1000.
J'ai suivi les conseils : https://debian-facile.org/viewtopic.php?id=18823,
installé firmware-amd-graphics
installé xserver-xorg-video-radeon

Comme dans le fil pré-cité, j'avais un souci de résolution, j'ai don créé un resolution.sh au démarrage qui contient :
xrandr --newmode $(gtf 1280 1024 60 | sed -ne 's/"//g;s/ Modeline //p')
xrandr --addmode VGA-0 1280x1024_60.00

Et j'ai une bonne résolution.

Malgré tout au démarrage, j'ai un message "cinnamon en mode rendu logiciel sans acceleration materielle" et bien l'impression que tout est très ralenti ...

Cela fait des mois que je cherche une solution.

Merci par avance pour votre aide

Pied de page des forums

Propulsé par FluxBB