Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 07-08-2015 01:23:55

Atys
Membre
Distrib. : Debian GNU/Linux unstable (sid)
Noyau : Linux 4.8.0-2-686-pae
(G)UI : Fluxbox - Xfce
Inscription : 28-02-2015

Erreur d'entrée/sortie (fichiers corrompus)

Bonsoir


J'ai un soucis pour supprimer quelques fichiers.

rm -rf /media/usb0/Films/\[\*


rm: impossible de supprimer « /media/usb0/Films/[\*


Erreur d'entrée/sortie




Il y a eu un problème lors du transfert, j'ai débrancher une clé USB avec aucun rapport au transfert et plantage.
Les fichiers qui sont corrompus n'ont pas leurs taille respective d'origine.


Merci smile

Hors ligne

#2 07-08-2015 01:29:33

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : Erreur d'entrée/sortie (fichiers corrompus)

et en te plaçant d'abord dans ta cle pour supprimer ensuite ?

"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#3 07-08-2015 01:59:22

Atys
Membre
Distrib. : Debian GNU/Linux unstable (sid)
Noyau : Linux 4.8.0-2-686-pae
(G)UI : Fluxbox - Xfce
Inscription : 28-02-2015

Re : Erreur d'entrée/sortie (fichiers corrompus)

Salut smolski

Idem en me plaçant sur le media.
Sans * un par un pareil.

Erreur d'entrée/sortie

Hors ligne

#4 07-08-2015 02:06:53

Melodie
Modérateur
Lieu : Pyrénées
Inscription : 28-05-2007
Site Web

Re : Erreur d'entrée/sortie (fichiers corrompus)

Et un reformatage de la clé usb avec gparted ?

le blog d'une newbie :: Linuxvillage :: Bentovillage


À propos de l'OS dominant ::> “Il est plus facile de berner les gens que de leur faire admettre qu'ils ont été bernés” (trad d'une citation approximative de Mark Twain)

Hors ligne

#5 07-08-2015 05:59:58

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Erreur d'entrée/sortie (fichiers corrompus)

bonjour,

Un truc tout con, peux-tu copier les autres dossiers "non altérés" sur un autre support ?

L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#6 07-08-2015 10:52:43

Atys
Membre
Distrib. : Debian GNU/Linux unstable (sid)
Noyau : Linux 4.8.0-2-686-pae
(G)UI : Fluxbox - Xfce
Inscription : 28-02-2015

Re : Erreur d'entrée/sortie (fichiers corrompus)

Bonjour,

Melodie a écrit :

Et un reformatage de la clé usb avec gparted ?


C'est un HDD externe DATA

/dev/sdg1          488384000 385864080  102519920  80% /media/usb0


golgot200 a écrit :

Un truc tout con, peux-tu copier les autres dossiers "non altérés" sur un autre support ?


J'ai essayer d'écraser, même erreur d'entrée/sortie , mais oui les "non altérés" je peux les déplacer sur un autre support.

Hors ligne

#7 07-08-2015 11:01:18

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Erreur d'entrée/sortie (fichiers corrompus)

Bon, c'est déjà pas mal. Sauves tout ce qui est bon en priorité. wink

Un conseil, fait comme moi quand tu transfers des fichiers et tu ne sais pas si c'est réellement fini, tu ouvres un terminal et tu tapes la commande


sync
 



Et tant que tu n'a pas l'invite c'est que ce n'est pas fini.
Astuce de captnfab. wink

Dernière modification par golgot200 (07-08-2015 11:04:14)


L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#8 07-08-2015 11:42:32

raleur
Membre
Inscription : 03-10-2014

Re : Erreur d'entrée/sortie (fichiers corrompus)

Melodie a écrit :

Et un reformatage de la clé usb avec gparted ?


Et pourquoi pas réinstaller le système au moindre problème tant qu'on y est ?
L'affichage des derniers logs du noyau avec dmesg juste après l'erreur d'E/S pourrait en apprendre plus sur la cause de l'erreur, erreur disque ou erreur du système de fichiers.
En cas de suspicion de corruption d'un système de fichiers, il faut faire une vérification/réparation avec fsck (après l'avoir démonté bien sûr).

Dernière modification par raleur (07-08-2015 11:44:46)

En ligne

#9 07-08-2015 12:03:37

golgot200
Membre
Lieu : AIN
Distrib. : Debian Jessie
Noyau : Linux debian 3.16.0-4-amd64
(G)UI : MATE
Inscription : 05-08-2007

Re : Erreur d'entrée/sortie (fichiers corrompus)

Oups, je n'avais pas vu le post de Melodie smile

Une manière de passer rapidement le post en résolu big_smile

L'ultime question ... l'intelligence a besoin de la bêtise pour s'affirmer, la beauté a besoin de la laideur pour resplendir, le courage nait dans la peur, les forts impressionnent au millieu des faibles, mais au final,... qui a donc besoin d'autant de connards ?

Hors ligne

#10 07-08-2015 13:52:26

Atys
Membre
Distrib. : Debian GNU/Linux unstable (sid)
Noyau : Linux 4.8.0-2-686-pae
(G)UI : Fluxbox - Xfce
Inscription : 28-02-2015

Re : Erreur d'entrée/sortie (fichiers corrompus)

Salut

raleur a écrit :

L'affichage des derniers logs du noyau avec dmesg juste après l'erreur d'E/S pourrait en apprendre plus sur la cause de l'erreur, erreur disque ou erreur du système de fichiers.
En cas de suspicion de corruption d'un système de fichiers, il faut faire une vérification/réparation avec fsck (après l'avoir démonté bien sûr).




Oui, alors je sors quelques logs, j'ai du mal pour bien cibler les erreurs ! J'ai oublié de préciser que mon DD externe est branché sur un petit HUB ou j'ai débranché une clé à chaud et plantage.


grep -i "sdg" /var/log/messages



Aug  2 15:49:50 pc kernel: [25483.342729] FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  2 15:49:50 pc kernel: [25483.549079] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  2 16:09:10 pc kernel: [26644.445392] sd 4:0:0:0: [sdg] 15237120 512-byte logical blocks: (7.80 GB/7.26 GiB)
Aug  2 16:09:10 pc kernel: [26644.446131] sd 4:0:0:0: [sdg] Write Protect is off
Aug  2 16:09:10 pc kernel: [26644.452367]  sdg: sdg1
Aug  2 16:09:10 pc kernel: [26644.455270] sd 4:0:0:0: [sdg] Attached SCSI removable disk
Aug  2 16:39:08 pc kernel: [28442.467821] sd 5:0:0:0: [sdg] 30801920 512-byte logical blocks: (15.7 GB/14.6 GiB)
Aug  2 16:39:08 pc kernel: [28442.468301] sd 5:0:0:0: [sdg] Write Protect is off
Aug  2 16:39:08 pc kernel: [28442.468677] sd 5:0:0:0: [sdg] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Aug  2 16:39:08 pc kernel: [28442.474898]  sdg: sdg1
Aug  2 16:39:08 pc kernel: [28442.481447] sd 5:0:0:0: [sdg] Attached SCSI removable disk
Aug  2 16:40:01 pc kernel: [28494.980935] FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  2 16:40:01 pc kernel: [28494.985300] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  2 16:40:23 pc kernel: [28516.915283] sd 6:0:0:0: [sdg] 30801920 512-byte logical blocks: (15.7 GB/14.6 GiB)
Aug  2 16:40:23 pc kernel: [28516.915639] sd 6:0:0:0: [sdg] Write Protect is off
Aug  2 16:40:23 pc kernel: [28516.916063] sd 6:0:0:0: [sdg] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Aug  2 16:40:23 pc kernel: [28516.919532]  sdg: sdg1
Aug  2 16:40:27 pc kernel: [28516.924886] sd 6:0:0:0: [sdg] Attached SCSI removable disk
Aug  2 16:40:27 pc kernel: [28521.006992] FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  2 16:40:27 pc kernel: [28521.011234] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  2 16:40:48 pc kernel: [28541.975280] sd 7:0:0:0: [sdg] 30801920 512-byte logical blocks: (15.7 GB/14.6 GiB)
Aug  2 16:40:48 pc kernel: [28541.975641] sd 7:0:0:0: [sdg] Write Protect is off
Aug  2 16:40:48 pc kernel: [28541.976075] sd 7:0:0:0: [sdg] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Aug  2 16:40:48 pc kernel: [28541.979484]  sdg: sdg1
Aug  2 16:41:45 pc kernel: [28541.984145] sd 7:0:0:0: [sdg] Attached SCSI removable disk
Aug  2 20:07:53 pc kernel: [40966.868608] FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  2 20:07:53 pc kernel: [40966.872549] FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  2 23:00:33 pc kernel: [   18.693071] sd 3:0:0:0: [sdg] 30801920 512-byte logical blocks: (15.7 GB/14.6 GiB)
Aug  2 23:00:33 pc kernel: [   18.693433] sd 3:0:0:0: [sdg] Write Protect is off
Aug  2 23:00:33 pc kernel: [   18.693805] sd 3:0:0:0: [sdg] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Aug  2 23:00:33 pc kernel: [   18.697436]  sdg: sdg1
Aug  2 23:00:33 pc kernel: [   18.700135] sd 3:0:0:0: [sdg] Attached SCSI removable disk
Aug  2 23:42:44 pc os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sdg1
Aug  2 23:42:44 pc 10freedos: debug: /dev/sdg1 is a FAT partition (mounted by GRUB)
Aug  2 23:42:44 pc 10qnx: debug: /dev/sdg1 is not a QNX4 partition: exiting
Aug  2 23:42:44 pc macosx-prober: debug: /dev/sdg1 is not an HFS+ partition: exiting
Aug  2 23:42:44 pc 20microsoft: debug: /dev/sdg1 is a FAT partition (mounted by GRUB)
Aug  2 23:42:45 pc 30utility: debug: /dev/sdg1 is a FAT partition (mounted by GRUB)
Aug  2 23:42:45 pc 83haiku: debug: /dev/sdg1 is not a BeFS partition: exiting
Aug  3 01:09:31 pc os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sdg1
Aug  3 01:09:31 pc 10freedos: debug: /dev/sdg1 is a FAT partition (mounted by GRUB)
Aug  3 01:09:31 pc 10qnx: debug: /dev/sdg1 is not a QNX4 partition: exiting
Aug  3 01:09:31 pc macosx-prober: debug: /dev/sdg1 is not an HFS+ partition: exiting
Aug  3 01:09:31 pc 20microsoft: debug: /dev/sdg1 is a FAT partition (mounted by GRUB)
Aug  3 01:09:31 pc 30utility: debug: /dev/sdg1 is a FAT partition (mounted by GRUB)
Aug  3 01:09:31 pc 83haiku: debug: /dev/sdg1 is not a BeFS partition: exiting
Aug  3 07:36:45 pc kernel: [    3.571785] sd 3:0:0:0: [sdg] 30801920 512-byte logical blocks: (15.7 GB/14.6 GiB)
Aug  3 07:36:45 pc kernel: [    3.572149] sd 3:0:0:0: [sdg] Write Protect is off
Aug  3 07:36:45 pc kernel: [    3.572529] sd 3:0:0:0: [sdg] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Aug  3 07:36:45 pc kernel: [    3.575726]  sdg: sdg1
Aug  3 07:36:45 pc kernel: [    3.577650] sd 3:0:0:0: [sdg] Attached SCSI removable disk
Aug  4 13:19:22 pc kernel: FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  4 13:19:22 pc kernel: FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  4 17:40:28 pc kernel: sd 5:0:0:0: [sdg] 30801920 512-byte logical blocks: (15.7 GB/14.6 GiB)
Aug  4 17:40:28 pc kernel: sd 5:0:0:0: [sdg] Write Protect is off
Aug  4 17:40:28 pc kernel: sd 5:0:0:0: [sdg] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
Aug  4 17:40:28 pc kernel:  sdg: sdg1
Aug  4 17:40:28 pc kernel: sd 5:0:0:0: [sdg] Attached SCSI removable disk
Aug  4 17:40:40 pc kernel: FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  4 17:40:40 pc kernel: FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  4 17:53:16 pc kernel: sdg: detected capacity change from 15770583040 to 0
Aug  4 18:04:03 pc kernel: sd 6:0:0:0: [sdg] Attached SCSI removable disk
Aug  4 18:04:08 pc kernel: sd 6:0:0:0: [sdg] 31078400 512-byte logical blocks: (15.9 GB/14.8 GiB)
Aug  4 18:04:08 pc kernel:  sdg: sdg1
Aug  4 18:04:21 pc kernel:  sdg: sdg1
Aug  4 18:04:22 pc kernel: FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  4 18:04:22 pc kernel: FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 66 00 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 66 f0 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 67 e0 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 68 d0 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 69 c0 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 6a b0 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 6b a0 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 6c 90 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 6d 80 00 00 f0 00
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Sense Key : Not Ready [current]
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] Add. Sense: Medium not present
Aug  4 18:36:17 pc kernel: sd 6:0:0:0: [sdg] CDB: Write(10) 2a 00 00 8e 6e 70 00 00 f0 00
Aug  4 18:40:04 pc kernel: sd 6:0:0:0: [sdg] 31078400 512-byte logical blocks: (15.9 GB/14.8 GiB)
Aug  4 18:40:04 pc kernel:  sdg: sdg1
Aug  4 18:40:08 pc kernel: FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  4 18:40:08 pc kernel: FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  4 18:40:41 pc kernel: sd 6:0:0:0: [sdg] 31078400 512-byte logical blocks: (15.9 GB/14.8 GiB)
Aug  4 18:40:41 pc kernel:  sdg: sdg1
Aug  4 18:40:43 pc kernel: FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  4 18:40:43 pc kernel: FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  4 18:41:10 pc kernel: sd 7:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Aug  4 18:41:10 pc kernel: sd 7:0:0:0: [sdg] Write Protect is off
Aug  4 18:41:10 pc kernel:  sdg: sdg1
Aug  4 18:41:11 pc kernel: sd 7:0:0:0: [sdg] Attached SCSI disk
Aug  4 18:43:34 pc audit: PATH item=0 name="/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.0/host3/target3:0:0/3:0:0:0/block/sdg/uevent" inode=11019 dev=00:10 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  4 18:43:34 pc audit: PATH item=0 name="/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.0/host3/target3:0:0/3:0:0:0/block/sdg/sdg1/uevent" inode=11049 dev=00:10 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  4 18:43:36 pc audit: PATH item=0 name="/dev/sdg" inode=8657 dev=00:06 mode=060600 ouid=0 ogid=0 rdev=08:60 nametype=NORMAL
Aug  4 18:43:36 pc audit: PATH item=0 name="/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.0/host3/target3:0:0/3:0:0:0/block/sdg/uevent" inode=11019 dev=00:10 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  4 18:43:36 pc audit: PATH item=0 name="/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.0/host3/target3:0:0/3:0:0:0/block/sdg/removable" inode=11025 dev=00:10 mode=0100444 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  4 18:43:36 pc audit: PATH item=0 name="/dev/sdg" inode=8657 dev=00:06 mode=060600 ouid=0 ogid=0 rdev=08:60 nametype=NORMAL
Aug  4 18:43:37 pc audit: PATH item=0 name="/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.0/host3/target3:0:0/3:0:0:0/block/sdg/uevent" inode=11019 dev=00:10 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  4 18:43:37 pc audit: PATH item=0 name="/dev/sdg" inode=8657 dev=00:06 mode=060660 ouid=0 ogid=6 rdev=08:60 nametype=NORMAL
Aug  4 18:43:37 pc audit: PATH item=0 name="/sys/devices/pci0000:00/0000:00:10.3/usb4/4-1/4-1.3/4-1.3:1.0/host3/target3:0:0/3:0:0:0/block/sdg/sdg1/uevent" inode=11049 dev=00:10 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  4 18:43:37 pc audit: PATH item=0 name="/dev/sdg1" inode=8658 dev=00:06 mode=060600 ouid=0 ogid=0 rdev=08:61 nametype=NORMAL
Aug  4 18:43:37 pc audit: PATH item=0 name="/sys/block/sdg/dev" inode=11043 dev=00:10 mode=0100444 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  4 18:43:37 pc audit: PATH item=0 name="/dev/sdg" inode=8657 dev=00:06 mode=060660 ouid=0 ogid=6 rdev=08:60 nametype=NORMAL
Aug  4 18:53:28 pc kernel: sd 3:0:0:0: [sdg] Attached SCSI removable disk
Aug  4 20:37:33 pc kernel: sd 3:0:0:0: [sdg] 31078400 512-byte logical blocks: (15.9 GB/14.8 GiB)
Aug  4 20:37:33 pc kernel:  sdg: sdg1
Aug  4 20:37:37 pc kernel: FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Aug  4 20:37:37 pc kernel: FAT-fs (sdg1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Aug  4 20:39:56 pc kernel: sd 3:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Aug  4 20:39:56 pc kernel: sd 3:0:0:0: [sdg] Write Protect is off
Aug  4 20:39:56 pc kernel:  sdg: sdg1
Aug  4 20:39:56 pc kernel: sd 3:0:0:0: [sdg] Attached SCSI disk
Aug  4 20:51:22 pc kernel: sd 4:0:0:0: [sdg] Spinning up disk...
Aug  4 20:51:23 pc kernel: sd 4:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Aug  4 20:51:23 pc kernel: sd 4:0:0:0: [sdg] Write Protect is off
Aug  4 20:51:23 pc kernel:  sdg: sdg1
Aug  4 20:51:23 pc kernel: sd 4:0:0:0: [sdg] Attached SCSI disk
Aug  4 21:22:44 pc kernel: sd 3:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Aug  4 21:22:44 pc kernel: sd 3:0:0:0: [sdg] Write Protect is off
Aug  4 21:22:44 pc kernel:  sdg: sdg1
Aug  4 21:22:44 pc kernel: sd 3:0:0:0: [sdg] Attached SCSI disk
Aug  5 08:20:18 pc logger[20169]: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sdg1
Aug  5 08:20:19 pc logger[20192]: debug: /dev/sdg1 is not a FAT partition: exiting
Aug  5 08:20:19 pc logger[20196]: debug: /dev/sdg1 is not a QNX4 partition: exiting
Aug  5 08:20:19 pc logger[20199]: debug: /dev/sdg1 is not an HFS+ partition: exiting
Aug  5 08:20:19 pc logger[20203]: debug: /dev/sdg1 is a NTFS partition
Aug  5 08:20:19 pc logger[20215]: debug: /dev/sdg1 is not a FAT partition: exiting
Aug  5 08:20:20 pc logger[20225]: debug: /dev/sdg1 is not a BeFS partition: exiting
Aug  5 10:41:16 pc logger[23023]: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sdg1
Aug  5 10:41:17 pc logger[23046]: debug: /dev/sdg1 is not a FAT partition: exiting
Aug  5 10:41:17 pc logger[23050]: debug: /dev/sdg1 is not a QNX4 partition: exiting
Aug  5 10:41:17 pc logger[23053]: debug: /dev/sdg1 is not an HFS+ partition: exiting
Aug  5 10:41:17 pc logger[23057]: debug: /dev/sdg1 is a NTFS partition
Aug  5 10:41:17 pc logger[23069]: debug: /dev/sdg1 is not a FAT partition: exiting
Aug  5 10:41:17 pc logger[23079]: debug: /dev/sdg1 is not a BeFS partition: exiting
Aug  6 18:56:56 pc audit: PATH item=0 name="/dev/sdg1" inode=7989 dev=00:06 mode=060600 ouid=0 ogid=0 rdev=08:61 nametype=NORMAL
Aug  6 18:56:56 pc audit: PATH item=0 name="/sys/block/sdg/dev" inode=10534 dev=00:10 mode=0100444 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
Aug  6 18:56:56 pc audit: PATH item=0 name="/dev/sdg" inode=7951 dev=00:06 mode=060660 ouid=0 ogid=6 rdev=08:60 nametype=NORMAL
 



dmesg | grep -i usb



[    1.381881] ACPI: bus type USB registered
[    1.381953] usbcore: registered new interface driver usbfs
[    1.381981] usbcore: registered new interface driver hub
[    1.397172] usbcore: registered new device driver usb
[    1.398395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.399088] uhci_hcd: USB Universal Host Controller Interface driver
[    1.413404] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    1.413611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.413616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.413619] usb usb1: Product: UHCI Host Controller
[    1.413622] usb usb1: Manufacturer: Linux 4.1.0-1-686-pae uhci_hcd
[    1.413625] usb usb1: SerialNumber: 0000:00:10.0
[    1.413920] hub 1-0:1.0: USB hub found
[    1.414286] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[    1.414408] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.414412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.414415] usb usb2: Product: UHCI Host Controller
[    1.414418] usb usb2: Manufacturer: Linux 4.1.0-1-686-pae uhci_hcd
[    1.414420] usb usb2: SerialNumber: 0000:00:10.1
[    1.414639] hub 2-0:1.0: USB hub found
[    1.415209] ehci-pci 0000:00:10.3: new USB bus registered, assigned bus number 3
[    1.424063] ehci-pci 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    1.424203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.424207] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.424211] usb usb3: Product: EHCI Host Controller
[    1.424214] usb usb3: Manufacturer: Linux 4.1.0-1-686-pae ehci_hcd
[    1.424217] usb usb3: SerialNumber: 0000:00:10.3
[    1.424494] hub 3-0:1.0: USB hub found
[    1.448366] hub 1-0:1.0: USB hub found
[    1.472201] hub 2-0:1.0: USB hub found
[    1.472844] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.473008] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.473012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.473015] usb usb4: Product: UHCI Host Controller
[    1.473018] usb usb4: Manufacturer: Linux 4.1.0-1-686-pae uhci_hcd
[    1.473021] usb usb4: SerialNumber: 0000:00:10.2
[    1.473300] hub 4-0:1.0: USB hub found
[    1.736051] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.868657] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[    1.868662] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.868665] usb 3-1: Product: USB 2.0 Hub
[    1.869533] hub 3-1:1.0: USB hub found
[    2.108073] usb 1-2: new low-speed USB device number 2 using uhci_hcd
[    2.220061] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.272162] usb 3-1.2: new low-speed USB device number 5 using ehci-pci
[    2.283672] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[    2.283681] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.283685] usb 1-2: Product: USB Optical Mouse
[    2.283688] usb 1-2: Manufacturer: Logitech
[    2.307831] usbcore: registered new interface driver usbhid
[    2.307838] usbhid: USB HID core driver
[    2.310396] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0001/input/input2
[    2.310860] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-2/input0
[    2.386026] usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[    2.386035] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.386039] usb 3-1.2: Product: USB Keyboard
[    2.386042] usb 3-1.2: Manufacturer: SIGMACHIP
[    2.391341] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0002.0002/input/input3
[    2.443985] usb 2-1: New USB device found, idVendor=116f, idProduct=c108
[    2.443994] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.443998] usb 2-1: Product: USB Storage Device
[    2.444001] usb 2-1: Manufacturer: Generic
[    2.444019] usb 2-1: SerialNumber: 20040623144548609
[    2.444291] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:10.3-1.2/input0
[    2.452322] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb3/3-1/3-1.2/3-1.2:1.1/0003:1C4F:0002.0003/input/input4
[    2.452775] usb-storage 2-1:1.0: USB Mass Storage device detected
[    2.452935] scsi host2: usb-storage 2-1:1.0
[    2.453105] usbcore: registered new interface driver usb-storage
[    2.453876] usbcore: registered new interface driver uas
[    2.508173] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:10.3-1.2/input1
[    2.580146] usb 3-1.4: new high-speed USB device number 6 using ehci-pci
[    2.673253] usb 3-1.4: New USB device found, idVendor=04e8, idProduct=61b3
[    2.673258] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.673262] usb 3-1.4: Product: Samsung M3 Portable
[    2.673265] usb 3-1.4: Manufacturer: Samsung M3 Portable
[    2.673268] usb 3-1.4: SerialNumber: DFCB7DEB080000B9
[    2.674847] usb-storage 3-1.4:1.0: USB Mass Storage device detected
[    2.675672] scsi host3: usb-storage 3-1.4:1.0
[    3.481847] scsi 2:0:0:0: Direct-Access     GENERIC  USB Storage-SMC  500A PQ: 0 ANSI: 0 CCS
[    3.509806] scsi 2:0:0:1: Direct-Access     GENERIC  USB Storage-CFC  500A PQ: 0 ANSI: 0 CCS
[    3.537801] scsi 2:0:0:2: Direct-Access     GENERIC  USB Storage-SDC  500A PQ: 0 ANSI: 0 CCS
[    3.565796] scsi 2:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  500A PQ: 0 ANSI: 0 CCS
 



dmesg -c



[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.0-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.3-1 (2015-08-03)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Packard Bell NEC 00000000000000000000000/MS-6786, BIOS V1.6 04/20/2004
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0B0000000 mask FF0000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000f5a60-0x000f5a6f] mapped at [c00f5a60]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[    0.000000]  [mem 0x37600000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
[    0.000000]  [mem 0x20000000-0x375fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[    0.000000]  [mem 0x37800000-0x379fdfff] page 4k
[    0.000000] BRK [0x01829000, 0x01829fff] PGTABLE
[    0.000000] BRK [0x0182a000, 0x0182bfff] PGTABLE
[    0.000000] BRK [0x0182c000, 0x0182cfff] PGTABLE
[    0.000000] BRK [0x0182d000, 0x0182dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c22000-0x36e08fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F79F0 000014 (v00 KM400 )
[    0.000000] ACPI: RSDT 0x000000003FFF3000 00002C (v01 KM400  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x000000003FFF3040 000074 (v01 KM400  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 0x000000003FFF30C0 0047F6 (v01 KM400  AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 0x000000003FFF0000 000040
[    0.000000] ACPI: APIC 0x000000003FFF78C0 00005A (v01 KM400  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 133MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000379fdfff]
[    0.000000]   HighMem  [mem 0x00000000379fe000-0x000000003ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffeffff]
[    0.000000] On node 0 totalpages: 262030
[    0.000000] free_area_init_node: node 0, pgdat c16dc980, node_mem_map f70fe024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1967 pages used for memmap
[    0.000000]   Normal zone: 223742 pages, LIFO batch:31
[    0.000000]   HighMem zone: 34290 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f70e4000 s45452 r0 d32372 u77824
[    0.000000] pcpu-alloc: s45452 r0 d32372 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260027
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.0-1-686-pae root=UUID=adeff228-767f-4a2c-b6c7-9fd5f28bc655 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003fff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1011232K/1048120K available (4991K kernel code, 624K rwdata, 1492K rodata, 676K init, 468K bss, 36888K reserved, 0K cma-reserved, 137160K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
                   vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
                     .init : 0xc16f5000 - 0xc179e000   ( 676 kB)
                     .data : 0xc14dff9a - 0xc16f3280   (2124 kB)
                     .text : 0xc1000000 - 0xc14dff9a   (4991 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f582a000 soft=f582c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.108 MHz processor
[    0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.21 BogoMIPS (lpj=7636432)
[    0.004023] pid_max: default: 32768 minimum: 301
[    0.008008] ACPI: Core revision 20150410
[    0.013723] ACPI: All ACPI Tables successfully acquired
[    0.013765] Security Framework initialized
[    0.013794] AppArmor: AppArmor disabled by boot time parameter
[    0.013797] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.013828] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.013833] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014306] Initializing cgroup subsys blkio
[    0.014316] Initializing cgroup subsys memory
[    0.014329] Initializing cgroup subsys devices
[    0.014338] Initializing cgroup subsys freezer
[    0.014347] Initializing cgroup subsys net_cls
[    0.014355] Initializing cgroup subsys perf_event
[    0.014362] Initializing cgroup subsys net_prio
[    0.014400] mce: CPU supports 4 MCE banks
[    0.014422] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.014425] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.021659] Freeing SMP alternatives memory: 24K (c179e000 - c17a4000)
[    0.024066] ftrace: allocating 21725 entries in 43 pages
[    0.036209] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.037545] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080000] smpboot: CPU0: AMD Athlon(tm) XP 2600+ (fam: 06, model: 0a, stepping: 00)
[    0.080000] Performance Events: AMD PMU driver.
[    0.080000] ... version:                0
[    0.080000] ... bit width:              48
[    0.080000] ... generic registers:      4
[    0.080000] ... value mask:             0000ffffffffffff
[    0.080000] ... max period:             00007fffffffffff
[    0.080000] ... fixed-purpose events:   0
[    0.080000] ... event mask:             000000000000000f
[    0.080000] x86: Booted up 1 node, 1 CPUs
[    0.080000] smpboot: Total of 1 processors activated (3818.21 BogoMIPS)
[    0.080000] devtmpfs: initialized
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
[    0.080000] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.080000] pinctrl core: initialized pinctrl subsystem
[    0.080000] NET: Registered protocol family 16
[    0.080000] cpuidle: using governor ladder
[    0.080000] cpuidle: using governor menu
[    0.080000] ACPI: bus type PCI registered
[    0.080000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.087713] PCI: PCI BIOS revision 2.10 entry at 0xfb9a0, last bus=1
[    0.087716] PCI: Using configuration type 1 for base access
[    0.089715] ACPI: Added _OSI(Module Device)
[    0.089720] ACPI: Added _OSI(Processor Device)
[    0.089722] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.089725] ACPI: Added _OSI(Processor Aggregator Device)
[    0.094350] ACPI: Interpreter enabled
[    0.094369] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.094377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.094398] ACPI: (supports S0 S3 S4 S5)
[    0.094402] ACPI: Using IOAPIC for interrupt routing
[    0.094454] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101867] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.101879] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.101888] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.101958] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.102222] PCI host bridge to bus 0000:00
[    0.102228] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.102233] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.102237] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.102241] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.102245] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.102249] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[    0.102268] pci 0000:00:00.0: [1106:3205] type 00 class 0x060000
[    0.102283] pci 0000:00:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff pref]
[    0.102463] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.102508] pci 0000:00:01.0: supports D1
[    0.102647] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.102688] pci 0000:00:10.0: reg 0x20: [io  0xd000-0xd01f]
[    0.102725] pci 0000:00:10.0: supports D1 D2
[    0.102729] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102797] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.102893] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.102933] pci 0000:00:10.1: reg 0x20: [io  0xd400-0xd41f]
[    0.102971] pci 0000:00:10.1: supports D1 D2
[    0.102974] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.103038] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.103129] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.103169] pci 0000:00:10.2: reg 0x20: [io  0xd800-0xd81f]
[    0.103206] pci 0000:00:10.2: supports D1 D2
[    0.103210] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.103272] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.103366] pci 0000:00:10.3: [1106:3104] type 00 class 0x0c0320
[    0.103383] pci 0000:00:10.3: reg 0x10: [mem 0xe2000000-0xe20000ff]
[    0.103444] pci 0000:00:10.3: supports D1 D2
[    0.103448] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.103510] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.103609] pci 0000:00:11.0: [1106:3177] type 00 class 0x060100
[    0.103668] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.103678] pci 0000:00:11.0: can't claim BAR 13 [io  0x4000-0x407f]: address conflict with ACPI PM1a_EVT_BLK [io  0x4000-0x4003]
[    0.103683] pci 0000:00:11.0: quirk: [io  0x5000-0x500f] claimed by vt8235 SMB
[    0.103835] pci 0000:00:11.1: [1106:0571] type 00 class 0x01018a
[    0.103879] pci 0000:00:11.1: reg 0x20: [io  0xdc00-0xdc0f]
[    0.103898] pci 0000:00:11.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.103902] pci 0000:00:11.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.103905] pci 0000:00:11.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.103908] pci 0000:00:11.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.104073] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.104090] pci 0000:00:11.5: reg 0x10: [io  0xe000-0xe0ff]
[    0.104156] pci 0000:00:11.5: supports D1 D2
[    0.104291] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.104307] pci 0000:00:12.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.104318] pci 0000:00:12.0: reg 0x14: [mem 0xe2001000-0xe20010ff]
[    0.104375] pci 0000:00:12.0: supports D1 D2
[    0.104378] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104442] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.104600] pci 0000:01:00.0: [1002:4152] type 00 class 0x030000
[    0.104615] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.104623] pci 0000:01:00.0: reg 0x14: [io  0xc000-0xc0ff]
[    0.104631] pci 0000:01:00.0: reg 0x18: [mem 0xe1000000-0xe100ffff]
[    0.104655] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.104679] pci 0000:01:00.0: supports D1 D2
[    0.104763] pci 0000:01:00.1: [1002:4172] type 00 class 0x038000
[    0.104774] pci 0000:01:00.1: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.104782] pci 0000:01:00.1: reg 0x14: [mem 0xe1010000-0xe101ffff]
[    0.104820] pci 0000:01:00.1: supports D1 D2
[    0.104917] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.104922] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.104927] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.104933] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff pref]
[    0.104942] pci_bus 0000:00: on NUMA node 0
[    0.105197] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[    0.105344] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[    0.105491] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[    0.105638] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[    0.105751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.105860] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.105967] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.106074] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.106232] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[    0.106389] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[    0.106568] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[    0.106724] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[    0.107771] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.107775] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.107777] vgaarb: loaded
[    0.107780] vgaarb: bridge control possible 0000:01:00.0
[    0.108039] PCI: Using ACPI for IRQ routing
[    0.108044] PCI: pci_cache_line_size set to 32 bytes
[    0.108081] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.108086] e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
[    0.108452] Switched to clocksource refined-jiffies
[    0.124558] pnp: PnP ACPI init
[    0.125008] system 00:00: [mem 0x000d9800-0x000dbfff] has been reserved
[    0.125014] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.125019] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.125023] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.125028] system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.125033] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.125037] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.125042] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.125046] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.125050] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.125055] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.125063] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.125170] system 00:01: [io  0x4000-0x407f] could not be reserved
[    0.125176] system 00:01: [io  0x5000-0x500f] has been reserved
[    0.125181] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.125686] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.125693] system 00:02: [io  0x0294-0x0297] has been reserved
[    0.125699] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.125793] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.125958] pnp 00:04: [dma 2]
[    0.126029] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.126340] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.126647] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.127109] pnp 00:07: [dma 3]
[    0.127213] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.127293] pnp: PnP ACPI: found 8 devices
[    0.127302] PnPBIOS: Disabled by ACPI PNP
[    0.165618] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.165640] Switched to clocksource acpi_pm
[    0.165664] pci 0000:00:11.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.165681] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
[    0.165687] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.165693] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.165700] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.165705] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xdfffffff pref]
[    0.165713] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.165716] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.165720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.165723] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.165727] pci_bus 0000:00: resource 8 [mem 0x40000000-0xfebfffff window]
[    0.165731] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.165734] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
[    0.165738] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff pref]
[    0.165809] NET: Registered protocol family 2
[    0.166139] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.166207] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.166334] TCP: Hash tables configured (established 8192 bind 8192)
[    0.166505] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.166537] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.166655] NET: Registered protocol family 1
[    0.166687] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.167121] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[    0.167125] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    0.167987] pci 0000:01:00.0: Video device with shadowed ROM
[    0.167994] PCI: CLS 32 bytes, default 32
[    0.167994] Unpacking initramfs...
[    0.780950] Freeing initrd memory: 18332K (f5c22000 - f6e09000)
[    0.781112] microcode: AMD CPU family 0x6 not supported
[    0.781805] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.781882] audit: initializing netlink subsys (disabled)
[    0.781940] audit: type=2000 audit(1438938353.779:1): initialized
[    0.782509] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.782541] zpool: loaded
[    0.782652] VFS: Disk quotas dquot_6.6.0
[    0.782682] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.783409] alg: No test for stdrng (krng)
[    0.783445] bounce: pool size: 64 pages
[    0.783472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.783529] io scheduler noop registered
[    0.783534] io scheduler deadline registered
[    0.783553] io scheduler cfq registered (default)
[    0.783737] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.783778] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.783890] GHES: HEST is not enabled!
[    0.783930] isapnp: Scanning for PnP cards...
[    1.137595] isapnp: No Plug & Play device found
[    1.137735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.158116] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.178518] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.179081] Linux agpgart interface v0.103
[    1.179309] agpgart: Detected VIA KM400/KM400A chipset
[    1.194561] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    1.194942] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.195492] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.195504] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.195804] mousedev: PS/2 mouse device common for all mice
[    1.195896] rtc_cmos 00:03: RTC can wake from S4
[    1.196141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.196195] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
[    1.196221] ledtrig-cpu: registered to indicate activity on CPUs
[    1.197199] NET: Registered protocol family 10
[    1.197593] mip6: Mobile IPv6
[    1.197601] NET: Registered protocol family 17
[    1.197611] mpls_gso: MPLS GSO support
[    1.197845] Using IPI No-Shortcut mode
[    1.198121] registered taskstats version 1
[    1.198564] rtc_cmos 00:03: setting system clock to 2015-08-07 09:05:55 UTC (1438938355)
[    1.198673] PM: Hibernation image not present or could not be loaded.
[    1.199745] Freeing unused kernel memory: 676K (c16f5000 - c179e000)
[    1.199828] Write protecting the kernel text: 4992k
[    1.199878] Write protecting the kernel read-only data: 1500k
[    1.277024] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.351471] Floppy drive(s): fd0 is 1.44M
[    1.368148] FDC 0 is a post-1991 82077
[    1.381881] ACPI: bus type USB registered
[    1.381953] usbcore: registered new interface driver usbfs
[    1.381981] usbcore: registered new interface driver hub
[    1.386698] SCSI subsystem initialized
[    1.388906] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    1.389375] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[    1.389379] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[    1.395033] thermal LNXTHERM:00: registered as thermal_zone0
[    1.395039] ACPI: Thermal Zone [THRM] (52 C)
[    1.397172] usbcore: registered new device driver usb
[    1.398395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.399088] uhci_hcd: USB Universal Host Controller Interface driver
[    1.399551] ehci-pci: EHCI PCI platform driver
[    1.409152] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1e800, 00:11:09:41:91:ea, IRQ 23
[    1.409978] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c1e1
[    1.413385] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.413404] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    1.413419] uhci_hcd 0000:00:10.0: detected 2 ports
[    1.413475] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000
[    1.413611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    1.413616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.413619] usb usb1: Product: UHCI Host Controller
[    1.413622] usb usb1: Manufacturer: Linux 4.1.0-1-686-pae uhci_hcd
[    1.413625] usb usb1: SerialNumber: 0000:00:10.0
[    1.413920] hub 1-0:1.0: USB hub found
[    1.413937] hub 1-0:1.0: 2 ports detected
[    1.414273] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.414286] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[    1.414297] uhci_hcd 0000:00:10.1: detected 2 ports
[    1.414316] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
[    1.414408] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.414412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.414415] usb usb2: Product: UHCI Host Controller
[    1.414418] usb usb2: Manufacturer: Linux 4.1.0-1-686-pae uhci_hcd
[    1.414420] usb usb2: SerialNumber: 0000:00:10.1
[    1.414639] hub 2-0:1.0: USB hub found
[    1.414652] hub 2-0:1.0: 2 ports detected
[    1.415199] ehci-pci 0000:00:10.3: EHCI Host Controller
[    1.415209] ehci-pci 0000:00:10.3: new USB bus registered, assigned bus number 3
[    1.415269] ehci-pci 0000:00:10.3: irq 21, io mem 0xe2000000
[    1.421755] libata version 3.00 loaded.
[    1.424063] ehci-pci 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    1.424203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.424207] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.424211] usb usb3: Product: EHCI Host Controller
[    1.424214] usb usb3: Manufacturer: Linux 4.1.0-1-686-pae ehci_hcd
[    1.424217] usb usb3: SerialNumber: 0000:00:10.3
[    1.424494] hub 3-0:1.0: USB hub found
[    1.424511] hub 3-0:1.0: 6 ports detected
[    1.448366] hub 1-0:1.0: USB hub found
[    1.448390] hub 1-0:1.0: 2 ports detected
[    1.472201] hub 2-0:1.0: USB hub found
[    1.472224] hub 2-0:1.0: 2 ports detected
[    1.472829] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.472844] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.472855] uhci_hcd 0000:00:10.2: detected 2 ports
[    1.472883] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[    1.473008] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.473012] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.473015] usb usb4: Product: UHCI Host Controller
[    1.473018] usb usb4: Manufacturer: Linux 4.1.0-1-686-pae uhci_hcd
[    1.473021] usb usb4: SerialNumber: 0000:00:10.2
[    1.473300] hub 4-0:1.0: USB hub found
[    1.473316] hub 4-0:1.0: 2 ports detected
[    1.473657] pata_via 0000:00:11.1: version 0.3.4
[    1.474007] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    1.474011] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    1.484363] scsi host0: pata_via
[    1.484722] scsi host1: pata_via
[    1.484836] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14
[    1.484840] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15
[    1.704559] ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
[    1.704566] ata1.00: 156301488 sectors, multi 16: LBA48
[    1.720405] ata1.00: configured for UDMA/100
[    1.720612] scsi 0:0:0:0: Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5
[    1.736051] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.780020] tsc: Refined TSC clocksource calibration: 1909.016 MHz
[    1.780027] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x3708e25c360, max_idle_ns: 881590627643 ns
[    1.868657] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[    1.868662] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.868665] usb 3-1: Product: USB 2.0 Hub
[    1.869533] hub 3-1:1.0: USB hub found
[    1.869712] hub 3-1:1.0: 4 ports detected
[    1.892619] ata2.00: ATAPI: PHILIPS DVD8801, NW02, max UDMA/33
[    1.906093] ata2.01: ATA-8: WDC WD1600AAJB-00WRA0, 58.01H58, max UDMA/100
[    1.906098] ata2.01: 312581808 sectors, multi 16: LBA48
[    1.920480] ata2.00: configured for UDMA/33
[    1.928869] ata2.01: configured for UDMA/100
[    1.931850] scsi 1:0:0:0: CD-ROM            PHILIPS  DVD8801          NW02 PQ: 0 ANSI: 5
[    1.941989] scsi 1:0:1:0: Direct-Access     ATA      WDC WD1600AAJB-0 1H58 PQ: 0 ANSI: 5
[    1.948149] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.948228] sd 0:0:0:0: [sda] Write Protect is off
[    1.948233] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.948267] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.952270]  sda: sda1 sda2
[    1.952879] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.963263] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.963274] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.963763] sd 1:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.963858] sd 1:0:1:0: [sdb] Write Protect is off
[    1.963864] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.963938] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.964434] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.008260]  sdb: sdb1 sdb2
[    2.041741] sd 1:0:1:0: [sdb] Attached SCSI disk
[    2.108073] usb 1-2: new low-speed USB device number 2 using uhci_hcd
[    2.220061] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.272162] usb 3-1.2: new low-speed USB device number 5 using ehci-pci
[    2.283672] usb 1-2: New USB device found, idVendor=046d, idProduct=c05a
[    2.283681] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.283685] usb 1-2: Product: USB Optical Mouse
[    2.283688] usb 1-2: Manufacturer: Logitech
[    2.290511] hidraw: raw HID events driver (C) Jiri Kosina
[    2.307831] usbcore: registered new interface driver usbhid
[    2.307838] usbhid: USB HID core driver
[    2.310396] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/0003:046D:C05A.0001/input/input2
[    2.310860] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-2/input0
[    2.378727] device-mapper: uevent: version 1.0.3
[    2.379825] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
[    2.386026] usb 3-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[    2.386035] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.386039] usb 3-1.2: Product: USB Keyboard
[    2.386042] usb 3-1.2: Manufacturer: SIGMACHIP
[    2.391341] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb3/3-1/3-1.2/3-1.2:1.0/0003:1C4F:0002.0002/input/input3
[    2.443985] usb 2-1: New USB device found, idVendor=116f, idProduct=c108
[    2.443994] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.443998] usb 2-1: Product: USB Storage Device
[    2.444001] usb 2-1: Manufacturer: Generic
[    2.444019] usb 2-1: SerialNumber: 20040623144548609
[    2.444291] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:10.3-1.2/input0
[    2.452322] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:10.3/usb3/3-1/3-1.2/3-1.2:1.1/0003:1C4F:0002.0003/input/input4
[    2.452775] usb-storage 2-1:1.0: USB Mass Storage device detected
[    2.452935] scsi host2: usb-storage 2-1:1.0
[    2.453105] usbcore: registered new interface driver usb-storage
[    2.453876] usbcore: registered new interface driver uas
[    2.508173] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:10.3-1.2/input1
[    2.580146] usb 3-1.4: new high-speed USB device number 6 using ehci-pci
[    2.673253] usb 3-1.4: New USB device found, idVendor=04e8, idProduct=61b3
[    2.673258] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.673262] usb 3-1.4: Product: Samsung M3 Portable
[    2.673265] usb 3-1.4: Manufacturer: Samsung M3 Portable
[    2.673268] usb 3-1.4: SerialNumber: DFCB7DEB080000B9
[    2.674847] usb-storage 3-1.4:1.0: USB Mass Storage device detected
[    2.675672] scsi host3: usb-storage 3-1.4:1.0
[    2.780094] Switched to clocksource tsc
[    3.481847] scsi 2:0:0:0: Direct-Access     GENERIC  USB Storage-SMC  500A PQ: 0 ANSI: 0 CCS
[    3.509806] scsi 2:0:0:1: Direct-Access     GENERIC  USB Storage-CFC  500A PQ: 0 ANSI: 0 CCS
[    3.537801] scsi 2:0:0:2: Direct-Access     GENERIC  USB Storage-SDC  500A PQ: 0 ANSI: 0 CCS
[    3.565796] scsi 2:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  500A PQ: 0 ANSI: 0 CCS
[    3.675041] scsi 3:0:0:0: Direct-Access     Samsung  M3 Portable      1301 PQ: 0 ANSI: 6
[    3.676367] sd 3:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.677328] sd 3:0:0:0: [sdg] Write Protect is off
[    3.677335] sd 3:0:0:0: [sdg] Mode Sense: 33 00 00 08
[    3.680673] sd 3:0:0:0: [sdg] No Caching mode page found
[    3.680726] sd 3:0:0:0: [sdg] Assuming drive cache: write through
[    3.838760] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    3.843748] sd 2:0:0:1: [sdd] Attached SCSI removable disk
[    3.848746] sd 2:0:0:2: [sde] Attached SCSI removable disk
[    3.853742] sd 2:0:0:3: [sdf] Attached SCSI removable disk
[    5.912546]  sdg: sdg1
[    5.916941] sd 3:0:0:0: [sdg] Attached SCSI disk
[    5.959167] random: nonblocking pool is initialized
[   15.340360] blk_update_request: I/O error, dev fd0, sector 0
[   15.340412] floppy: error -5 while reading block 0
[   15.436049] raid6: mmxx1    gen()  1606 MB/s
[   15.504022] raid6: mmxx2    gen()  2756 MB/s
[   15.572041] raid6: sse1x1   gen()  1534 MB/s
[   15.640026] raid6: sse1x2   gen()  2274 MB/s
[   15.708037] raid6: int32x1  gen()   708 MB/s
[   15.776077] raid6: int32x1  xor()   439 MB/s
[   15.844024] raid6: int32x2  gen()   924 MB/s
[   15.912007] raid6: int32x2  xor()   524 MB/s
[   15.980012] raid6: int32x4  gen()   730 MB/s
[   16.048007] raid6: int32x4  xor()   493 MB/s
[   16.116093] raid6: int32x8  gen()   667 MB/s
[   16.184021] raid6: int32x8  xor()   418 MB/s
[   16.184024] raid6: using algorithm mmxx2 gen() 2756 MB/s
[   16.184027] raid6: using intx1 recovery algorithm
[   16.186548] xor: measuring software checksum speed
[   16.224006]    pIII_sse  :  2420.000 MB/sec
[   16.264006]    prefetch64-sse:  2454.000 MB/sec
[   16.264009] xor: using function: prefetch64-sse (2454.000 MB/sec)
[   16.295140] Btrfs loaded
[   28.460478] blk_update_request: I/O error, dev fd0, sector 0
[   28.460529] floppy: error -5 while reading block 0
[   28.759556] PM: Starting manual resume from disk
[   28.759573] PM: Hibernation image partition 8:18 present
[   28.759575] PM: Looking for hibernation image.
[   28.759959] PM: Image not found (code -22)
[   28.759963] PM: Hibernation image not present or could not be loaded.
[   28.903097] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   29.649185] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[   29.894068] systemd[1]: Inserted module 'autofs4'
[   29.922463] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[   30.036499] systemd[1]: systemd 224 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   30.036751] systemd[1]: Detected architecture x86.
[   30.050072] systemd[1]: Set hostname to <pc>.
[   32.066059] systemd[1]: rsyslog.service: Cannot add dependency job, ignoring: Unit rsyslog.service is masked.
[   32.066146] systemd[1]: mongodb.service: Cannot add dependency job, ignoring: Unit mongodb.service is masked.
[   32.067637] systemd[1]: Reached target Encrypted Volumes.
[   32.067880] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   32.068314] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   32.068408] systemd[1]: Created slice Root Slice.
[   32.068482] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   32.068556] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   32.068654] systemd[1]: Listening on udev Control Socket.
[   32.068715] systemd[1]: Listening on LVM2 poll daemon socket.
[   32.068766] systemd[1]: Listening on LVM2 metadata daemon socket.
[   32.068835] systemd[1]: Listening on Journal Socket (/dev/log).
[   32.069056] systemd[1]: Created slice System Slice.
[   32.069295] systemd[1]: Created slice system-getty.slice.
[   32.069335] systemd[1]: Reached target User and Group Name Lookups.
[   32.069361] systemd[1]: Reached target Remote File Systems (Pre).
[   32.069460] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   32.069548] systemd[1]: Listening on Journal Socket.
[   32.070642] systemd[1]: Mounting Huge Pages File System...
[   32.071916] systemd[1]: Mounting POSIX Message Queue File System...
[   32.073499] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   32.120743] systemd[1]: Listening on Journal Audit Socket.
[   32.122150] systemd[1]: Starting Journal Service...
[   32.122318] systemd[1]: Listening on udev Kernel Socket.
[   32.151057] systemd[1]: Starting Load Kernel Modules...
[   32.152706] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   32.154072] systemd[1]: Starting LSB: init script for readahead-fedora...
[   32.155459] systemd[1]: Starting Nameserver information manager...
[   32.155654] systemd[1]: Listening on fsck to fsckd communication Socket.
[   32.161023] systemd[1]: Mounting Debug File System...
[   32.161332] systemd[1]: Created slice User and Session Slice.
[   32.161393] systemd[1]: Reached target Slices.
[   32.418040] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   32.420284] systemd[1]: Starting Create Static Device Nodes in /dev...
[   32.537442] systemd[1]: Mounted Huge Pages File System.
[   32.541156] systemd[1]: Mounted Debug File System.
[   32.541257] systemd[1]: Mounted POSIX Message Queue File System.
[   32.715892] systemd[1]: Started Nameserver information manager.
[   32.976182] lp: driver loaded but no devices found
[   33.029297] ppdev: user-space parallel port driver
[   33.142949] parport_pc 00:07: reported by Plug and Play ACPI
[   33.143026] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   33.240255] lp0: using parport0 (interrupt-driven).
[   33.809633] systemd[1]: Started Load Kernel Modules.
[   33.811179] systemd[1]: Starting Apply Kernel Variables...
[   34.245187] systemd[1]: Started Journal Service.
[   39.622424] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   39.715003] systemd-journald[215]: Received request to flush runtime journal from PID 1
[   40.372481] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   40.372496] ACPI: Power Button [PWRB]
[   40.376086] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[   40.376102] ACPI: Sleep Button [SLPB]
[   40.376254] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   40.376259] ACPI: Power Button [PWRF]
[   40.526518] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   40.695595] NET: Registered protocol family 23
[   40.797495] [drm] Initialized drm 1.1.0 20060810
[   40.801553] via-ircc 0000:00:11.0: can't enable device: BAR 13 [io  size 0x0080] not assigned
[   41.048776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   41.048860] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   41.048935] sd 1:0:1:0: Attached scsi generic sg2 type 0
[   41.049018] sd 2:0:0:0: Attached scsi generic sg3 type 0
[   41.049092] sd 2:0:0:1: Attached scsi generic sg4 type 0
[   41.049166] sd 2:0:0:2: Attached scsi generic sg5 type 0
[   41.049237] sd 2:0:0:3: Attached scsi generic sg6 type 0
[   41.049314] sd 3:0:0:0: Attached scsi generic sg7 type 0
[   41.066054] [drm] radeon kernel modesetting enabled.
[   41.075280] [drm] initializing kernel modesetting (RV350 0x1002:0x4152 0x1002:0x0002).
[   41.075318] [drm] register mmio base: 0xE1000000
[   41.075320] [drm] register mmio size: 65536
[   41.076240] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   41.076255] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[   41.076293] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[   41.076301] radeon 0000:01:00.0: GTT: 256M 0xB0000000 - 0xBFFFFFFF
[   41.076306] [drm] Generation 2 PCI interface, using max accessible memory
[   41.076312] radeon 0000:01:00.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[   41.077752] [drm] Detected VRAM RAM=256M, BAR=256M
[   41.077757] [drm] RAM width 128bits DDR
[   41.081092] [TTM] Zone  kernel: Available graphics memory: 446552 kiB
[   41.081100] [TTM] Zone highmem: Available graphics memory: 515132 kiB
[   41.081102] [TTM] Initializing pool allocator
[   41.081115] [TTM] Initializing DMA pool allocator
[   41.081391] [drm] radeon: 256M of VRAM memory ready
[   41.081395] [drm] radeon: 256M of GTT memory ready.
[   41.081499] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[   41.082973] radeon 0000:01:00.0: WB disabled
[   41.082992] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xf821c000
[   41.082999] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   41.083001] [drm] Driver supports precise vblank timestamp query.
[   41.083055] [drm] radeon: irq initialized.
[   41.083128] [drm] Loading R300 Microcode
[   41.323581] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R300_cp.bin
[   41.323968] [drm] radeon: ring at 0x00000000B0001000
[   41.323995] [drm] ring test succeeded in 0 usecs
[   41.324355] [drm] ib test succeeded in 0 usecs
[   41.344589] [drm] Radeon Display Connectors
[   41.344598] [drm] Connector 0:
[   41.344600] [drm]   VGA-1
[   41.344604] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   41.344606] [drm]   Encoders:
[   41.344608] [drm]     CRT1: INTERNAL_DAC1
[   41.344610] [drm] Connector 1:
[   41.344611] [drm]   DVI-I-1
[   41.344613] [drm]   HPD1
[   41.344616] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   41.344617] [drm]   Encoders:
[   41.344619] [drm]     CRT2: INTERNAL_DAC2
[   41.344621] [drm]     DFP1: INTERNAL_TMDS1
[   41.344622] [drm] Connector 2:
[   41.344624] [drm]   SVIDEO-1
[   41.344625] [drm]   Encoders:
[   41.344627] [drm]     TV1: INTERNAL_DAC2
[   41.535316] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   41.535326] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   42.195241] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   42.684982] [drm] fb mappable at 0xC0040000
[   42.684991] [drm] vram apper at 0xC0000000
[   42.684994] [drm] size 7057408
[   42.684996] [drm] fb depth is 24
[   42.684998] [drm]    pitch is 6720
[   42.686131] fbcon: radeondrmfb (fb0) is primary device
[   42.979061] Adding 1999868k swap on /dev/sdb2.  Priority:-1 extents:1 across:1999868k FS
[   43.540328] Console: switching to colour frame buffer device 210x65
[   43.707104] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   43.707108] radeon 0000:01:00.0: registered panic notifier
[   43.892043] [drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[   51.644458] blk_update_request: I/O error, dev fd0, sector 0
[   51.645252] floppy: error -5 while reading block 0
[   53.806882] RPC: Registered named UNIX socket transport module.
[   53.806891] RPC: Registered udp transport module.
[   53.806893] RPC: Registered tcp transport module.
[   53.806895] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   53.851505] FS-Cache: Loaded
[   53.901738] FS-Cache: Netfs 'nfs' registered for caching
[   53.984524] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   60.281189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   65.104096] audit: type=1305 audit(1438931219.397:22570): auid=4294967295 ses=4294967295 op="remove_rule" key=(null) list=4 res=1
[   65.104101] audit: type=1305 audit(1438931219.397:22571): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
[   65.104711] audit: type=1307 audit(1438931219.389:22567):  cwd="/"
[   65.104725] audit: type=1302 audit(1438931219.389:22567): item=0 name="/usr/lib/python2.7/dist-packages/samba/dcerpc/idmap.so" inode=9496178 dev=08:11 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=NORMAL
[   65.104738] audit: type=1327 audit(1438931219.389:22567): proctitle=2F62696E2F7368002F6574632F696E69742E642F6E6D6264007374617274
[   65.108080] audit: type=1307 audit(1438931219.381:22565):  cwd="/"
[   65.108090] audit: type=1302 audit(1438931219.381:22565): item=0 name="/usr/lib/python2.7/dist-packages/samba/dcerpc/idmap.i386-linux-gnu.so" nametype=UNKNOWN
[   65.108096] audit: type=1327 audit(1438931219.381:22565): proctitle=2F62696E2F7368002F6574632F696E69742E642F73616D62612D61642D6463007374617274
[ 4962.142506] fuse init (API version 7.23)
[ 4973.233337] Bluetooth: Core ver 2.20
[ 4973.234100] NET: Registered protocol family 31
[ 4973.234107] Bluetooth: HCI device and connection manager initialized
[ 4973.234120] Bluetooth: HCI socket layer initialized
[ 4973.234126] Bluetooth: L2CAP socket layer initialized
[ 4973.234152] Bluetooth: SCO socket layer initialized
[ 4973.347634] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4973.347643] Bluetooth: BNEP filters: protocol multicast
[ 4973.347653] Bluetooth: BNEP socket layer initialized
[ 6100.527400] perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000




Ca cogne les messages en rouge, faut-il modifier à la main pour avoir par exemple le log en couleur shell ou sans couleur ?


Sinon proposé moi une commande plus explicite pour mieux identifier le plantage, à mon avis du mini HUB !


Vérification / Réparation avec fsck, un peu perdu désolé :/


umount /dev/sdg1



fsck /dev/sdg



fsck de util-linux 2.26.2
e2fsck 1.43-WIP (18-May-2015)
ext2fs_open2: Numéro magique invalide dans le super-bloc
fsck.ext2 : Superbloc invalide, tentons d'utiliser les blocs de sauvetage...
fsck.ext2: Numéro magique invalide dans le super-bloc lors de la tentative d'ouverture de /dev/sdg

Le superbloc n'a pu être lu ou ne contient pas un système de fichiers
ext2/ext3/ext4 correct. Si le périphérique est valide et qu'il contient réellement
un système de fichiers ext2/ext3/ext4 (et non pas de type swap, ufs ou autre),
alors le superbloc est corrompu, et vous pourriez tenter d'exécuter
e2fsck avec un autre superbloc :
    e2fsck -b 8193 <périphérique>
 ou
    e2fsck -b 32768 <périphérique>

Trouvé une table de partitions dos dans /dev/sdg
 



e2fsck /dev/sdg



e2fsck 1.43-WIP (18-May-2015)
ext2fs_open2: Numéro magique invalide dans le super-bloc
e2fsck : Superbloc invalide, tentons d'utiliser les blocs de sauvetage...
e2fsck: Numéro magique invalide dans le super-bloc lors de la tentative d'ouverture de /dev/sdg

Le superbloc n'a pu être lu ou ne contient pas un système de fichiers
ext2/ext3/ext4 correct. Si le périphérique est valide et qu'il contient réellement
un système de fichiers ext2/ext3/ext4 (et non pas de type swap, ufs ou autre),
alors le superbloc est corrompu, et vous pourriez tenter d'exécuter
e2fsck avec un autre superbloc :
    e2fsck -b 8193 <périphérique>
 ou
    e2fsck -b 32768 <périphérique>

Trouvé une table de partitions dos dans /dev/sdg



fsck.vfat /dev/sdg



fsck.fat 3.0.28 (2015-05-16)
Logical sector size (64543 bytes) is not a multiple of the physical sector size.



fsck.msdos /dev/sdg



fsck.fat 3.0.28 (2015-05-16)
Logical sector size (64543 bytes) is not a multiple of the physical sector size.




Si j'arrive à faire un bon fsck, je pense aussi que le problème va ce résoudre.

Désolé pour le bloc de logs, pas clair en plus  :rolleyes:

Hors ligne

#11 07-08-2015 14:22:17

raleur
Membre
Inscription : 03-10-2014

Re : Erreur d'entrée/sortie (fichiers corrompus)

La clé est partitionnée. Le système de fichiers est dans la partition /dev/sdg1, pas dans le périphérique entier /dev/sdg.
D'après les logs le système de fichiers semble être FAT. Si fsck ne le détecte pas automatiquement, il faudra utiliser explicitement la variante dosfsck, fsck.msdos ou fsck.vfat (ce sont des alias du même programme) du paquet dosfstools.

Pour supprimer la coloration syntaxique dans le résultat des commandes, utilise le bouton "autre code" qui génére une balise "code" simple au lieu de "code=user" ou "code=root".

En ligne

#12 07-08-2015 14:33:41

Atys
Membre
Distrib. : Debian GNU/Linux unstable (sid)
Noyau : Linux 4.8.0-2-686-pae
(G)UI : Fluxbox - Xfce
Inscription : 28-02-2015

Re : Erreur d'entrée/sortie (fichiers corrompus)

Ok,

Pas de partitionnement de ma part, une partition principal.
Une seule partition sur le disque, donc ok /dev/sdg1

Oui, j'aurais du y penser pour les balises, ça me prenais la tête, merci raleur !

Merci à tous

Je test tout ça en fin de journée.

Hors ligne

#13 07-08-2015 14:37:44

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : Erreur d'entrée/sortie (fichiers corrompus)

/me a déjà corrigé les balises retours de Atys... wink

"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

Pied de page des forums