Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 27-01-2016 13:32:03

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : [résolu]Freeze intempestifs

Une fois installé, memtest se lance depuis le grub smile
Y'a une ligne qui s'ajoute pour...

"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#27 27-01-2016 13:32:34

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [résolu]Freeze intempestifs

lol

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#28 27-01-2016 13:36:48

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : [résolu]Freeze intempestifs

Mais j'ai dit qu'il y a vait une ligne pour.. En plus de tous les autres... Na ! tongue

"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#29 27-01-2016 13:38:24

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [résolu]Freeze intempestifs

C'est pas fô !  cool

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#30 27-01-2016 14:03:50

Kusajika
Membre
Inscription : 08-04-2015

Re : [résolu]Freeze intempestifs

Yeah , and the winner is.... big_smile , Ca me fait penser à Unreal Tournement cool cool big_smile

Hors ligne

#31 27-01-2016 15:46:51

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

Merci pour ce déferlement de soutient, mais j'avais trouvé avant vous tongue
Par contre, bonne ou mauvaise nouvelle, cela ne vient pas de la mémoire ram ...
Retour qu point de départ.
J'utilise chromium pour essayer de voir si le problème revient mais pour l'instant rien ...
C'est bizarre non ?

Hors ligne

#32 27-01-2016 16:33:24

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : [résolu]Freeze intempestifs

Bonjour,

Pourrait-tu poster le résultat de la commande

dmesg


ça nous aiderai à voir si c'est un problème hardware


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#33 27-01-2016 17:38:02

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

greenmerlin a écrit :

Bonjour,

Pourrait-tu poster le résultat de la commande

dmesg


ça nous aiderai à voir si c'est un problème hardware


Pas de problème, par contre, c'est quoi la commande pour avoir la sortie dans un fichier ?
Xterm n'arrive pas à remonter jusqu’au début ...
Editit : trouvé smile

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f6a3a3e5-a9bf-4a86-85c1-4e338cb8c195 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000aa771fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa772000-0x00000000aa7c8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aa7c9000-0x00000000aab5bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aab5c000-0x00000000aab5efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aab5f000-0x00000000aada4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aada5000-0x00000000aadb5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aadb6000-0x00000000aadccfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aadcd000-0x00000000aadcefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aadcf000-0x00000000aadd6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aadd7000-0x00000000aade1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aade2000-0x00000000aae3dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aae3e000-0x00000000aae80fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aae81000-0x00000000aaffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ab800000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000034fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z68 DELUXE, BIOS 0501 05/09/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 0AB800000 mask FFF800000 uncachable
[    0.000000]   2 base 0AC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   5 base 34FE00000 mask FFFE00000 uncachable
[    0.000000]   6 base 350000000 mask FF0000000 uncachable
[    0.000000]   7 base 360000000 mask FE0000000 uncachable
[    0.000000]   8 base 380000000 mask F80000000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xab800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fce50-0x000fce5f] mapped at [ffff8800000fce50]
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x34fc00000-0x34fdfffff]
[    0.000000]  [mem 0x34fc00000-0x34fdfffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x34c000000-0x34fbfffff]
[    0.000000]  [mem 0x34c000000-0x34fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x300000000-0x34bffffff]
[    0.000000]  [mem 0x300000000-0x34bffffff] page 2M
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xaa771fff]
[    0.000000]  [mem 0x40200000-0xaa5fffff] page 2M
[    0.000000]  [mem 0xaa600000-0xaa771fff] page 4k
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xaadcd000-0xaadcefff]
[    0.000000]  [mem 0xaadcd000-0xaadcefff] page 4k
[    0.000000] init_memory_mapping: [mem 0xaae81000-0xaaffffff]
[    0.000000]  [mem 0xaae81000-0xaaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[    0.000000]  [mem 0x100000000-0x2ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x3637a000-0x371b4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0420 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000AA7BE068 00004C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000AA7C7DD8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000AA7BE140 009C95 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000AADD9F80 000040
[    0.000000] ACPI: APIC 0x00000000AA7C7ED0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000AA7C7F48 000102 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000AA7C8050 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000AA7C8090 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000034fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x34fdfffff]
[    0.000000]   NODE_DATA [mem 0x34fdef000-0x34fdf3fff]
[    0.000000]  [ffffea0000000000-ffffea000b9fffff] PMD -> [ffff880343400000-ffff88034ddfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x34fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xaa771fff]
[    0.000000]   node   0: [mem 0xaadcd000-0xaadcefff]
[    0.000000]   node   0: [mem 0xaae81000-0xaaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x34fdfffff]
[    0.000000] On node 0 totalpages: 3121806
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 155 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9482 pages used for memmap
[    0.000000]   DMA32 zone: 693491 pages, LIFO batch:31
[    0.000000]   Normal zone: 33145 pages used for memmap
[    0.000000]   Normal zone: 2424320 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa772000-0xaa7c8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa7c9000-0xaab5bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaab5c000-0xaab5efff]
[    0.000000] PM: Registered nosave memory: [mem 0xaab5f000-0xaada4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaada5000-0xaadb5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaadb6000-0xaadccfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaadcf000-0xaadd6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaadd7000-0xaade1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaade2000-0xaae3dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaae3e000-0xaae80fff]
[    0.000000] PM: Registered nosave memory: [mem 0xab000000-0xab7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xab800000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88034fa00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3078968
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f6a3a3e5-a9bf-4a86-85c1-4e338cb8c195 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12219908K/12487224K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 267316K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3310.992 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.98 BogoMIPS (lpj=13243968)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000033] ACPI: Core revision 20140424
[    0.003903] ACPI: All ACPI Tables successfully acquired
[    0.003923] Security Framework initialized
[    0.003929] AppArmor: AppArmor disabled by boot time parameter
[    0.003930] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004635] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.007003] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008019] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008032] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008234] Initializing cgroup subsys memory
[    0.008237] Initializing cgroup subsys devices
[    0.008242] Initializing cgroup subsys freezer
[    0.008244] Initializing cgroup subsys net_cls
[    0.008247] Initializing cgroup subsys blkio
[    0.008249] Initializing cgroup subsys perf_event
[    0.008251] Initializing cgroup subsys net_prio
[    0.008268] CPU: Physical Processor ID: 0
[    0.008269] CPU: Processor Core ID: 0
[    0.008272] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.008274] mce: CPU supports 9 MCE banks
[    0.008285] CPU0: Thermal monitoring enabled (TM1)
[    0.008290] process: using mwait in idle threads
[    0.008293] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.008370] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.449264] ftrace: allocating 21679 entries in 85 pages
[    0.456759] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.496407] smpboot: CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[    0.496412] TSC deadline timer enabled
[    0.496429] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.496443] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.496445] ... version:                3
[    0.496446] ... bit width:              48
[    0.496446] ... generic registers:      8
[    0.496447] ... value mask:             0000ffffffffffff
[    0.496448] ... max period:             0000ffffffffffff
[    0.496448] ... fixed-purpose events:   3
[    0.496449] ... event mask:             00000007000000ff
[    0.497506] x86: Booting SMP configuration:
[    0.497507] .... node  #0, CPUs:      #1
[    0.510566] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.510644]  #2 #3
[    0.536981] x86: Booted up 1 node, 4 CPUs
[    0.536984] smpboot: Total of 4 processors activated (26487.93 BogoMIPS)
[    0.539264] devtmpfs: initialized
[    0.541789] PM: Registering ACPI NVS region [mem 0xaa772000-0xaa7c8fff] (356352 bytes)
[    0.541796] PM: Registering ACPI NVS region [mem 0xaab5c000-0xaab5efff] (12288 bytes)
[    0.541797] PM: Registering ACPI NVS region [mem 0xaada5000-0xaadb5fff] (69632 bytes)
[    0.541799] PM: Registering ACPI NVS region [mem 0xaadd7000-0xaade1fff] (45056 bytes)
[    0.541801] PM: Registering ACPI NVS region [mem 0xaae3e000-0xaae80fff] (274432 bytes)
[    0.542444] pinctrl core: initialized pinctrl subsystem
[    0.542498] NET: Registered protocol family 16
[    0.542584] cpuidle: using governor ladder
[    0.542587] cpuidle: using governor menu
[    0.542615] ACPI: bus type PCI registered
[    0.542617] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.542677] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.542678] PCI: not using MMCONFIG
[    0.542679] PCI: Using configuration type 1 for base access
[    0.557319] ACPI: Added _OSI(Module Device)
[    0.557321] ACPI: Added _OSI(Processor Device)
[    0.557322] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.557323] ACPI: Added _OSI(Processor Aggregator Device)
[    0.558673] ACPI: Executed 1 blocks of module-level executable AML code
[    0.560341] ACPI: Dynamic OEM Table Load:
[    0.560345] ACPI: SSDT 0xFFFF880342B5E000 0003E0 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.560607] ACPI: Dynamic OEM Table Load:
[    0.560609] ACPI: SSDT 0xFFFF880342B57A00 000120 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.561098] ACPI: Interpreter enabled
[    0.561104] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.561113] ACPI: (supports S0 S1 S3 S4 S5)
[    0.561114] ACPI: Using IOAPIC for interrupt routing
[    0.561128] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.561166] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.561233] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.561415] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.565598] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.565602] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.565702] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.565793] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.565921] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.566028] PCI host bridge to bus 0000:00
[    0.566030] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.566031] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.566033] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.566034] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.566035] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff]
[    0.566036] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xffffffff]
[    0.566042] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.566104] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.566128] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.566152] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.566181] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
[    0.566203] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.566226] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.566258] pci 0000:00:02.0: [8086:0102] type 00 class 0x038000
[    0.566266] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
[    0.566271] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.566275] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.566352] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.566373] pci 0000:00:16.0: reg 0x10: [mem 0xfbf25000-0xfbf2500f 64bit]
[    0.566443] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.566506] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[    0.566523] pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
[    0.566531] pci 0000:00:19.0: reg 0x14: [mem 0xfbf24000-0xfbf24fff]
[    0.566538] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.566595] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.566623] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.566659] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.566677] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf23000-0xfbf233ff]
[    0.566760] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.566789] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.566821] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.566896] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.566927] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.566961] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.567036] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.567067] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.567100] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.567174] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.567205] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.567237] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.567311] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.567343] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.567378] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.567397] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf22000-0xfbf223ff]
[    0.567479] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.567508] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.567543] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[    0.567690] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.567706] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.567713] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.567720] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.567727] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.567734] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.567743] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf21000-0xfbf217ff]
[    0.567783] pci 0000:00:1f.2: PME# supported from D3hot
[    0.567838] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.567851] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf20000-0xfbf200ff 64bit]
[    0.567870] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.567951] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.567985] pci 0000:02:00.0: [10de:0ca3] type 00 class 0x030000
[    0.567993] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.568001] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.568009] pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.568015] pci 0000:02:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.568020] pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    0.568087] pci 0000:02:00.1: [10de:0be4] type 00 class 0x040300
[    0.568095] pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[    0.575755] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.575759] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.575762] pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.575767] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.575855] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.575935] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.575962] pci 0000:04:00.0: reg 0x10: [mem 0xfbe00000-0xfbe01fff 64bit]
[    0.576102] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.583755] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.583763] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.583875] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[    0.583903] pci 0000:05:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]
[    0.584043] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.591750] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.591757] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.591873] pci 0000:06:00.0: [10b5:8608] type 01 class 0x060400
[    0.591893] pci 0000:06:00.0: reg 0x10: [mem 0xfbc00000-0xfbc1ffff]
[    0.592024] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.592058] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.599742] pci 0000:00:1c.7: PCI bridge to [bus 06-10]
[    0.599748] pci 0000:00:1c.7:   bridge window [io  0x9000-0xdfff]
[    0.599753] pci 0000:00:1c.7:   bridge window [mem 0xfb800000-0xfbcfffff]
[    0.599761] pci 0000:00:1c.7:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.599918] pci 0000:07:01.0: [10b5:8608] type 01 class 0x060400
[    0.600063] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[    0.600144] pci 0000:07:04.0: [10b5:8608] type 01 class 0x060400
[    0.600289] pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
[    0.600368] pci 0000:07:05.0: [10b5:8608] type 01 class 0x060400
[    0.600512] pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
[    0.600593] pci 0000:07:06.0: [10b5:8608] type 01 class 0x060400
[    0.600737] pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
[    0.600820] pci 0000:07:07.0: [10b5:8608] type 01 class 0x060400
[    0.600964] pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
[    0.601047] pci 0000:07:08.0: [10b5:8608] type 01 class 0x060400
[    0.601192] pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
[    0.601277] pci 0000:07:09.0: [10b5:8608] type 01 class 0x060400
[    0.601421] pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
[    0.601521] pci 0000:06:00.0: PCI bridge to [bus 07-10]
[    0.601529] pci 0000:06:00.0:   bridge window [io  0x9000-0xdfff]
[    0.601533] pci 0000:06:00.0:   bridge window [mem 0xfb800000-0xfbbfffff]
[    0.601541] pci 0000:06:00.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.601635] pci 0000:08:00.0: [1106:3403] type 00 class 0x0c0010
[    0.601669] pci 0000:08:00.0: reg 0x10: [mem 0xfbb00000-0xfbb007ff 64bit]
[    0.601686] pci 0000:08:00.0: reg 0x18: [io  0xd000-0xd0ff]
[    0.601832] pci 0000:08:00.0: supports D2
[    0.601833] pci 0000:08:00.0: PME# supported from D2 D3hot D3cold
[    0.611745] pci 0000:07:01.0: PCI bridge to [bus 08]
[    0.611756] pci 0000:07:01.0:   bridge window [io  0xd000-0xdfff]
[    0.611763] pci 0000:07:01.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.611891] pci 0000:09:00.0: [10b5:8112] type 01 class 0x060400
[    0.612116] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.612129] pci 0000:07:04.0: PCI bridge to [bus 09-0a]
[    0.612137] pci 0000:07:04.0:   bridge window [io  0xc000-0xcfff]
[    0.612257] pci 0000:0a:04.0: [13f6:8788] type 00 class 0x040100
[    0.612298] pci 0000:0a:04.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.612489] pci 0000:0a:04.0: supports D1 D2
[    0.612598] pci 0000:09:00.0: PCI bridge to [bus 0a]
[    0.612606] pci 0000:09:00.0:   bridge window [io  0xc000-0xcfff]
[    0.612739] pci 0000:0b:00.0: [197b:2362] type 00 class 0x010185
[    0.612784] pci 0000:0b:00.0: reg 0x10: [io  0xb040-0xb047]
[    0.612803] pci 0000:0b:00.0: reg 0x14: [io  0xb030-0xb033]
[    0.612821] pci 0000:0b:00.0: reg 0x18: [io  0xb020-0xb027]
[    0.612839] pci 0000:0b:00.0: reg 0x1c: [io  0xb010-0xb013]
[    0.612857] pci 0000:0b:00.0: reg 0x20: [io  0xb000-0xb00f]
[    0.612876] pci 0000:0b:00.0: reg 0x24: [mem 0xfba10000-0xfba101ff]
[    0.612894] pci 0000:0b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.612973] pci 0000:0b:00.0: PME# supported from D3hot
[    0.623736] pci 0000:07:05.0: PCI bridge to [bus 0b]
[    0.623746] pci 0000:07:05.0:   bridge window [io  0xb000-0xbfff]
[    0.623753] pci 0000:07:05.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.623876] pci 0000:0c:00.0: [1b4b:9130] type 00 class 0x010601
[    0.623899] pci 0000:0c:00.0: reg 0x10: [io  0xa090-0xa097]
[    0.623914] pci 0000:0c:00.0: reg 0x14: [io  0xa080-0xa083]
[    0.623928] pci 0000:0c:00.0: reg 0x18: [io  0xa070-0xa077]
[    0.623942] pci 0000:0c:00.0: reg 0x1c: [io  0xa060-0xa063]
[    0.623956] pci 0000:0c:00.0: reg 0x20: [io  0xa050-0xa05f]
[    0.623970] pci 0000:0c:00.0: reg 0x24: [mem 0xfb921000-0xfb9217ff]
[    0.623985] pci 0000:0c:00.0: reg 0x30: [mem 0xfb910000-0xfb91ffff pref]
[    0.624057] pci 0000:0c:00.0: PME# supported from D3hot
[    0.631729] pci 0000:07:06.0: PCI bridge to [bus 0c]
[    0.631740] pci 0000:07:06.0:   bridge window [io  0xa000-0xafff]
[    0.631746] pci 0000:07:06.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.631878] pci 0000:0d:00.0: [1033:0194] type 00 class 0x0c0330
[    0.631913] pci 0000:0d:00.0: reg 0x10: [mem 0xfb800000-0xfb801fff 64bit]
[    0.632088] pci 0000:0d:00.0: PME# supported from D0 D3hot
[    0.639729] pci 0000:07:07.0: PCI bridge to [bus 0d]
[    0.639743] pci 0000:07:07.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.639883] pci 0000:0e:00.0: [1b21:1080] type 01 class 0x060400
[    0.640071] pci 0000:0e:00.0: supports D1 D2
[    0.640072] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.640115] pci 0000:0e:00.0: System wakeup disabled by ACPI
[    0.647720] pci 0000:07:08.0: PCI bridge to [bus 0e-0f]
[    0.647939] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[    0.648071] pci 0000:10:00.0: [10ec:8168] type 00 class 0x020000
[    0.648098] pci 0000:10:00.0: reg 0x10: [io  0x9000-0x90ff]
[    0.648137] pci 0000:10:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
[    0.648162] pci 0000:10:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.648294] pci 0000:10:00.0: supports D1 D2
[    0.648295] pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.655722] pci 0000:07:09.0: PCI bridge to [bus 10]
[    0.655732] pci 0000:07:09.0:   bridge window [io  0x9000-0x9fff]
[    0.655746] pci 0000:07:09.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.656247] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.656283] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.656319] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.656354] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.656389] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.656424] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.656458] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.656494] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.656546] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.656561] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.656633] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.656634] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.656636] vgaarb: loaded
[    0.656637] vgaarb: bridge control possible 0000:02:00.0
[    0.656678] PCI: Using ACPI for IRQ routing
[    0.657771] PCI: pci_cache_line_size set to 64 bytes
[    0.657877] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[    0.657878] e820: reserve RAM buffer [mem 0xaa772000-0xabffffff]
[    0.657880] e820: reserve RAM buffer [mem 0xaadcf000-0xabffffff]
[    0.657881] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[    0.657882] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
[    0.657980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.657983] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.660002] Switched to clocksource hpet
[    0.663665] pnp: PnP ACPI init
[    0.663674] ACPI: bus type PNP registered
[    0.663772] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.663774] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.663775] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.663777] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.663778] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.663780] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.663849] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.663851] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.663878] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.663918] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.663920] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.664137] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.664138] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.664140] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.664141] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.664143] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.664144] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.664146] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.664147] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.664191] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.664193] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.664349] pnp: PnP ACPI: found 6 devices
[    0.664349] ACPI: bus type PNP unregistered
[    0.670459] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.670463] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.670465] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.670467] pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.670469] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.670471] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.670482] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.670486] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.670493] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.670498] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.670506] pci 0000:07:01.0: PCI bridge to [bus 08]
[    0.670509] pci 0000:07:01.0:   bridge window [io  0xd000-0xdfff]
[    0.670515] pci 0000:07:01.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.670526] pci 0000:09:00.0: PCI bridge to [bus 0a]
[    0.670530] pci 0000:09:00.0:   bridge window [io  0xc000-0xcfff]
[    0.670557] pci 0000:07:04.0: PCI bridge to [bus 09-0a]
[    0.670560] pci 0000:07:04.0:   bridge window [io  0xc000-0xcfff]
[    0.670578] pci 0000:0b:00.0: BAR 6: assigned [mem 0xfba00000-0xfba0ffff pref]
[    0.670579] pci 0000:07:05.0: PCI bridge to [bus 0b]
[    0.670582] pci 0000:07:05.0:   bridge window [io  0xb000-0xbfff]
[    0.670588] pci 0000:07:05.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.670599] pci 0000:07:06.0: PCI bridge to [bus 0c]
[    0.670602] pci 0000:07:06.0:   bridge window [io  0xa000-0xafff]
[    0.670608] pci 0000:07:06.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.670619] pci 0000:07:07.0: PCI bridge to [bus 0d]
[    0.670625] pci 0000:07:07.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.670636] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[    0.670659] pci 0000:07:08.0: PCI bridge to [bus 0e-0f]
[    0.670674] pci 0000:07:09.0: PCI bridge to [bus 10]
[    0.670677] pci 0000:07:09.0:   bridge window [io  0x9000-0x9fff]
[    0.670687] pci 0000:07:09.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.670695] pci 0000:06:00.0: PCI bridge to [bus 07-10]
[    0.670698] pci 0000:06:00.0:   bridge window [io  0x9000-0xdfff]
[    0.670704] pci 0000:06:00.0:   bridge window [mem 0xfb800000-0xfbbfffff]
[    0.670709] pci 0000:06:00.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.670716] pci 0000:00:1c.7: PCI bridge to [bus 06-10]
[    0.670719] pci 0000:00:1c.7:   bridge window [io  0x9000-0xdfff]
[    0.670723] pci 0000:00:1c.7:   bridge window [mem 0xfb800000-0xfbcfffff]
[    0.670727] pci 0000:00:1c.7:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.670732] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.670734] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.670735] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.670736] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
[    0.670737] pci_bus 0000:00: resource 8 [mem 0xafa00000-0xffffffff]
[    0.670739] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.670740] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.670741] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.670742] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.670744] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.670745] pci_bus 0000:06: resource 0 [io  0x9000-0xdfff]
[    0.670746] pci_bus 0000:06: resource 1 [mem 0xfb800000-0xfbcfffff]
[    0.670747] pci_bus 0000:06: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.670748] pci_bus 0000:07: resource 0 [io  0x9000-0xdfff]
[    0.670749] pci_bus 0000:07: resource 1 [mem 0xfb800000-0xfbbfffff]
[    0.670751] pci_bus 0000:07: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.670752] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    0.670753] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.670754] pci_bus 0000:09: resource 0 [io  0xc000-0xcfff]
[    0.670755] pci_bus 0000:0a: resource 0 [io  0xc000-0xcfff]
[    0.670756] pci_bus 0000:0b: resource 0 [io  0xb000-0xbfff]
[    0.670758] pci_bus 0000:0b: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.670759] pci_bus 0000:0c: resource 0 [io  0xa000-0xafff]
[    0.670760] pci_bus 0000:0c: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.670761] pci_bus 0000:0d: resource 1 [mem 0xfb800000-0xfb8fffff]
[    0.670762] pci_bus 0000:10: resource 0 [io  0x9000-0x9fff]
[    0.670763] pci_bus 0000:10: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.670808] NET: Registered protocol family 2
[    0.671013] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.671191] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.671306] TCP: Hash tables configured (established 131072 bind 65536)
[    0.671319] TCP: reno registered
[    0.671332] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.671376] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.671451] NET: Registered protocol family 1
[    0.671675] pci 0000:02:00.0: Video device with shadowed ROM
[    0.672047] PCI: CLS 64 bytes, default 64
[    0.672085] Unpacking initramfs...
[    0.863342] Freeing initrd memory: 14572K (ffff88003637a000 - ffff8800371b5000)
[    0.863351] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.863353] software IO TLB [mem 0xa6772000-0xaa772000] (64MB) mapped at [ffff8800a6772000-ffff8800aa771fff]
[    0.863569] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.863604] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[    0.863610] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[    0.863616] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
[    0.863620] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
[    0.863661] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.863882] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.863909] audit: initializing netlink subsys (disabled)
[    0.863924] audit: type=2000 audit(1453903491.424:1): initialized
[    0.864224] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.864242] zbud: loaded
[    0.864389] VFS: Disk quotas dquot_6.5.2
[    0.864403] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.864447] msgmni has been set to 23895
[    0.864668] alg: No test for stdrng (krng)
[    0.864685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.864719] io scheduler noop registered
[    0.864721] io scheduler deadline registered
[    0.864749] io scheduler cfq registered (default)
[    0.864887] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.864970] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    0.865058] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[    0.865126] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.865193] pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
[    0.865258] pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
[    0.865345] pcieport 0000:06:00.0: irq 46 for MSI/MSI-X
[    0.865520] pcieport 0000:07:01.0: irq 47 for MSI/MSI-X
[    0.865684] pcieport 0000:07:04.0: irq 48 for MSI/MSI-X
[    0.865848] pcieport 0000:07:05.0: irq 49 for MSI/MSI-X
[    0.866010] pcieport 0000:07:06.0: irq 50 for MSI/MSI-X
[    0.866152] pcieport 0000:07:07.0: irq 51 for MSI/MSI-X
[    0.866315] pcieport 0000:07:08.0: irq 52 for MSI/MSI-X
[    0.866477] pcieport 0000:07:09.0: irq 53 for MSI/MSI-X
[    0.866616] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.866619] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.866627] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[    0.866629] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.866630] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    0.866631] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[    0.866647] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.866651] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.866666] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.866667] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.866671] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.866686] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    0.866687] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.866690] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[    0.866705] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[    0.866706] pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.866708] pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
[    0.866709] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    0.866710] pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
[    0.866711] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    0.866712] pci 0000:0a:04.0: Signaling PME through PCIe PME interrupt
[    0.866713] pcieport 0000:07:05.0: Signaling PME through PCIe PME interrupt
[    0.866714] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[    0.866715] pcieport 0000:07:06.0: Signaling PME through PCIe PME interrupt
[    0.866716] pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
[    0.866717] pcieport 0000:07:07.0: Signaling PME through PCIe PME interrupt
[    0.866718] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[    0.866719] pcieport 0000:07:08.0: Signaling PME through PCIe PME interrupt
[    0.866720] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
[    0.866721] pcieport 0000:07:09.0: Signaling PME through PCIe PME interrupt
[    0.866722] pci 0000:10:00.0: Signaling PME through PCIe PME interrupt
[    0.866725] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[    0.866739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.866752] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.866767] intel_idle: MWAIT substates: 0x1120
[    0.866768] intel_idle: v0.4 model 0x2A
[    0.866768] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.866901] GHES: HEST is not enabled!
[    0.866951] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.867230] Linux agpgart interface v0.103
[    0.867313] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.869770] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.869773] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.869883] mousedev: PS/2 mouse device common for all mice
[    0.869920] rtc_cmos 00:02: RTC can wake from S4
[    0.870031] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.870056] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.870064] Intel P-state driver initializing.
[    0.870072] Intel pstate controlling: cpu 0
[    0.870113] Intel pstate controlling: cpu 1
[    0.870127] Intel pstate controlling: cpu 2
[    0.870140] Intel pstate controlling: cpu 3
[    0.870178] ledtrig-cpu: registered to indicate activity on CPUs
[    0.870896] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.870898] AMD IOMMUv2 functionality not available on this system
[    0.871016] TCP: cubic registered
[    0.871115] NET: Registered protocol family 10
[    0.871361] mip6: Mobile IPv6
[    0.871367] NET: Registered protocol family 17
[    0.871377] mpls_gso: MPLS GSO support
[    0.871779] registered taskstats version 1
[    0.872855] rtc_cmos 00:02: setting system clock to 2016-01-27 14:04:52 UTC (1453903492)
[    0.872996] PM: Hibernation image not present or could not be loaded.
[    0.873966] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    0.873968] Write protecting the kernel read-only data: 8192k
[    0.874413] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[    0.875119] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.887554] systemd-udevd[72]: starting version 215
[    0.887940] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.896830] pps_core: LinuxPPS API ver. 1 registered
[    0.896832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.896964] PTP clock support registered
[    0.897581] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.897582] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    0.897709] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.897726] ACPI: bus type USB registered
[    0.897729] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
[    0.897745] usbcore: registered new interface driver usbfs
[    0.897753] usbcore: registered new interface driver hub
[    0.898578] SCSI subsystem initialized
[    0.899430] libata version 3.00 loaded.
[    0.903811] usbcore: registered new device driver usb
[    0.904090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.904219] ehci-pci: EHCI PCI platform driver
[    0.904514] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.904520] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[    0.906076] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.906316] r8169 0000:10:00.0: irq 55 for MSI/MSI-X
[    0.906474] r8169 0000:10:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018f8000, 14:da:e9:06:47:e0, XID 0c900800 IRQ 55
[    0.906475] r8169 0000:10:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.971797] firewire_ohci 0000:08:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
[    1.013358] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X
[    1.013362] xhci_hcd 0000:04:00.0: irq 57 for MSI/MSI-X
[    1.013364] xhci_hcd 0000:04:00.0: irq 58 for MSI/MSI-X
[    1.013366] xhci_hcd 0000:04:00.0: irq 59 for MSI/MSI-X
[    1.013369] xhci_hcd 0000:04:00.0: irq 60 for MSI/MSI-X
[    1.013477] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.013479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.013480] usb usb1: Product: xHCI Host Controller
[    1.013481] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.013482] usb usb1: SerialNumber: 0000:04:00.0
[    1.013643] hub 1-0:1.0: USB hub found
[    1.013652] hub 1-0:1.0: 2 ports detected
[    1.013744] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.013747] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    1.016723] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.016734] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.016736] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.016737] usb usb2: Product: xHCI Host Controller
[    1.016738] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.016738] usb usb2: SerialNumber: 0000:04:00.0
[    1.016916] hub 2-0:1.0: USB hub found
[    1.016924] hub 2-0:1.0: 2 ports detected
[    1.017049] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.017052] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    1.017230] xhci_hcd 0000:05:00.0: irq 61 for MSI/MSI-X
[    1.017233] xhci_hcd 0000:05:00.0: irq 62 for MSI/MSI-X
[    1.017235] xhci_hcd 0000:05:00.0: irq 63 for MSI/MSI-X
[    1.017238] xhci_hcd 0000:05:00.0: irq 64 for MSI/MSI-X
[    1.017240] xhci_hcd 0000:05:00.0: irq 65 for MSI/MSI-X
[    1.017330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.017332] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.017333] usb usb3: Product: xHCI Host Controller
[    1.017334] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.017335] usb usb3: SerialNumber: 0000:05:00.0
[    1.017474] hub 3-0:1.0: USB hub found
[    1.017483] hub 3-0:1.0: 2 ports detected
[    1.017569] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.017571] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    1.020666] usb usb4: We don'
t know the algorithms for LPM for this host, disabling LPM.
[    1.020677] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.020679] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.020680] usb usb4: Product: xHCI Host Controller
[    1.020681] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.020682] usb usb4: SerialNumber: 0000:05:00.0
[    1.020849] hub 4-0:1.0: USB hub found
[    1.020859] hub 4-0:1.0: 2 ports detected
[    1.020992] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[    1.020995] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 5
[    1.129924] xhci_hcd 0000:0d:00.0: irq 66 for MSI/MSI-X
[    1.129928] xhci_hcd 0000:0d:00.0: irq 67 for MSI/MSI-X
[    1.129930] xhci_hcd 0000:0d:00.0: irq 68 for MSI/MSI-X
[    1.129941] xhci_hcd 0000:0d:00.0: irq 69 for MSI/MSI-X
[    1.129943] xhci_hcd 0000:0d:00.0: irq 70 for MSI/MSI-X
[    1.130059] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.130061] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.130062] usb usb5: Product: xHCI Host Controller
[    1.130063] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.130064] usb usb5: SerialNumber: 0000:0d:00.0
[    1.130216] hub 5-0:1.0: USB hub found
[    1.130226] hub 5-0:1.0: 2 ports detected
[    1.130313] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[    1.130315] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 6
[    1.133119] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.133131] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.133132] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.133133] usb usb6: Product: xHCI Host Controller
[    1.133134] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.133135] usb usb6: SerialNumber: 0000:0d:00.0
[    1.133314] hub 6-0:1.0: USB hub found
[    1.133324] hub 6-0:1.0: 2 ports detected
[    1.162054] e1000e 0000:00:19.0 eth1: registered PHC clock
[    1.162056] e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 14:da:e9:06:36:e1
[    1.162057] e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
[    1.162089] e1000e 0000:00:19.0 eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    1.162140] ahci 0000:00:1f.2: version 3.0
[    1.162256] ahci 0000:00:1f.2: irq 71 for MSI/MSI-X
[    1.175583] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.175589] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.216452] scsi0 : ahci
[    1.216818] scsi1 : ahci
[    1.217219] scsi2 : ahci
[    1.217559] scsi3 : ahci
[    1.217865] scsi4 : ahci
[    1.218128] scsi5 : ahci
[    1.218210] ata1: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21100 irq 71
[    1.218213] ata2: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21180 irq 71
[    1.218216] ata3: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21200 irq 71
[    1.218218] ata4: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21280 irq 71
[    1.218221] ata5: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21300 irq 71
[    1.218223] ata6: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21380 irq 71
[    1.218346] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.218352] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 7
[    1.218366] ehci-pci 0000:00:1a.0: debug port 2
[    1.218505] ahci 0000:0b:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.218507] ahci 0000:0b:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.218813] scsi6 : ahci
[    1.218930] scsi7 : ahci
[    1.218968] ata7: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10100 irq 16
[    1.218972] ata8: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10180 irq 16
[    1.219079] ahci 0000:0c:00.0: irq 72 for MSI/MSI-X
[    1.222260] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.222272] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfbf23000
[    1.231609] ahci 0000:0c:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    1.231611] ahci 0000:0c:00.0: flags: 64bit ncq pio
[    1.232599] scsi8 : ahci
[    1.232939] scsi9 : ahci
[    1.233204] scsi10 : ahci
[    1.233495] scsi11 : ahci
[    1.233665] scsi12 : ahci
[    1.233802] scsi13 : ahci
[    1.233898] scsi14 : ahci
[    1.233985] scsi15 : ahci
[    1.234027] ata9: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921100 irq 72
[    1.234030] ata10: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921180 irq 72
[    1.234033] ata11: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921200 irq 72
[    1.234036] ata12: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921280 irq 72
[    1.234039] ata13: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921300 irq 72
[    1.234043] ata14: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921380 irq 72
[    1.234046] ata15: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921400 irq 72
[    1.234049] ata16: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921480 irq 72
[    1.323421] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.335409] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.335471] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.335474] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.335476] usb usb7: Product: EHCI Host Controller
[    1.335479] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.335481] usb usb7: SerialNumber: 0000:00:1a.0
[    1.335729] hub 7-0:1.0: USB hub found
[    1.335739] hub 7-0:1.0: 2 ports detected
[    1.335991] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.335998] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.336017] ehci-pci 0000:00:1d.0: debug port 2
[    1.339917] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.339924] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf22000
[    1.459288] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.459343] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.459346] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.459348] usb usb8: Product: EHCI Host Controller
[    1.459351] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.459353] usb usb8: SerialNumber: 0000:00:1d.0
[    1.459627] hub 8-0:1.0: USB hub found
[    1.459638] hub 8-0:1.0: 2 ports detected
[    1.469498] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610
[    1.469502] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.469505] usb 1-2: Product: USB2.0 Hub
[    1.469507] usb 1-2: Manufacturer: GenesysLogic
[    1.470781] hub 1-2:1.0: USB hub found
[    1.471432] firewire_core 0000:08:00.0: created device fw0: GUID 001fc6000014957d, S400
[    1.471731] hub 1-2:1.0: 4 ports detected
[    1.531264] ata8: SATA link down (SStatus 0 SControl 300)
[    1.539247] ata7: SATA link down (SStatus 0 SControl 300)
[    1.539253] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.539280] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.539305] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.539327] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.540069] ata3.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[    1.540073] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.540362] ata6.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133
[    1.540367] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.540917] ata3.00: configured for UDMA/133
[    1.541498] ata6.00: configured for UDMA/133
[    1.543223] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.550977] ata5.00: ATA-8: KINGSTON SV300S37A120G, 506ABBF0, max UDMA/133
[    1.550981] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.551210] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.552373] ata1.00: ATA-7: Hitachi HDS721680PLA380, P21OA70A, max UDMA/133
[    1.552377] ata1.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.553763] ata1.00: configured for UDMA/133
[    1.554028] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72168 A70A PQ: 0 ANSI: 5
[    1.554642] ata2.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[    1.554646] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.555226] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.559232] ata11: SATA link down (SStatus 0 SControl 300)
[    1.559278] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.559316] ata13: SATA link down (SStatus 0 SControl 300)
[    1.559358] ata15: SATA link down (SStatus 0 SControl 300)
[    1.561056] ata5.00: configured for UDMA/133
[    1.563210] ata12: SATA link down (SStatus 0 SControl 300)
[    1.564026] ata4.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
[    1.564029] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.564616] ata2.00: configured for UDMA/133
[    1.564849] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[    1.565521] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
[    1.567216] ata14: SATA link down (SStatus 0 SControl 300)
[    1.569469] ata4.00: configured for UDMA/133
[    1.569738] scsi 3:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    1.570264] scsi 4:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    1.570753] scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 AAB0 PQ: 0 ANSI: 5
[    1.587648] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    1.610465] usb 2-2: New USB device found, idVendor=05e3, idProduct=0612
[    1.610470] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.610472] usb 2-2: Product: USB3.0 Hub
[    1.610474] usb 2-2: Manufacturer: GenesysLogic
[    1.612739] hub 2-2:1.0: USB hub found
[    1.613334] hub 2-2:1.0: 4 ports detected
[    1.657035] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[    1.657354] ata16.00: configured for UDMA/66
[    1.657556] ata9.00: ATAPI: ATAPI   iHOS104, WL0F, max UDMA/100
[    1.658395] ata9.00: configured for UDMA/100
[    1.671130] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.672225] ata10.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    1.672229] ata10.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.673523] ata10.00: configured for UDMA/133
[    1.684291] scsi 8:0:0:0: CD-ROM            ATAPI    iHOS104          WL0F PQ: 0 ANSI: 5
[    1.700187] scsi 9:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    1.700599] scsi 15:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5
[    1.701998] sd 0:0:0:0: [sda] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB)
[    1.702026] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.702051] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.702053] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.702111] sd 2:0:0:0: [sdc] Write Protect is off
[    1.702114] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.702116] sd 3:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.702162] sd 1:0:0:0: [sdb] Write Protect is off
[    1.702165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.702168] sd 3:0:0:0: [sdd] Write Protect is off
[    1.702173] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.702188] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn'
t support DPO or FUA
[    1.702191] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.702282] sd 4:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.702285] sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.702287] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[    1.702322] sd 5:0:0:0: [sdf] Write Protect is off
[    1.702325] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    1.702340] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn'
t support DPO or FUA
[    1.702393] sd 0:0:0:0: [sda] Write Protect is off
[    1.702395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.702405] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.702453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'
t support DPO or FUA
[    1.702481] sd 4:0:0:0: [sde] Write Protect is off
[    1.702485] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    1.702500] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.703445]  sdb: sdb1
[    1.703705] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.704197]  sde: sde1
[    1.704453] sd 4:0:0:0: [sde] Attached SCSI disk
[    1.704875]  sdd: sdd1 sdd2
[    1.705197] sd 3:0:0:0: [sdd] Attached SCSI disk
[    1.711296]  sdc: sdc1
[    1.711554] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.712586]  sda: sda1
[    1.712835] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.713875]  sdf: sdf1
[    1.714118] sd 5:0:0:0: [sdf] Attached SCSI disk
[    1.715054] ata16.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.715132] ata16.00: irq_stat 0x40000001
[    1.715194] scsi 15:0:0:0: CDB:
[    1.715196] Inquiry: 12 01 00 00 ff 00
[    1.715206] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
         res 50/00:03:00:14:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[    1.715278] ata16.00: status: { DRDY }
[    1.716634] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.716673] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.716939] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.717102] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.717428] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    1.717503] sd 5:0:0:0: Attached scsi generic sg5 type 0
[    1.717747] sr 8:0:0:0: Attached scsi generic sg6 type 5
[    1.718099] scsi 9:0:0:0: Attached scsi generic sg7 type 0
[    1.718175] scsi 15:0:0:0: Attached scsi generic sg8 type 3
[    1.720920] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[    1.720924] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.721095] sr 8:0:0:0: Attached scsi CD-ROM sr0
[    1.721266] sd 9:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.721322] sd 9:0:0:0: [sdg] Write Protect is off
[    1.721325] sd 9:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[    1.721342] sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn'
t support DPO or FUA
[    1.728541]  sdg: sdg1
[    1.729184] sd 9:0:0:0: [sdg] Attached SCSI disk
[    1.779599] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.779675] ata9.00: irq_stat 0x40000001
[    1.815558] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.815633] ata9.00: irq_stat 0x40000001
[    1.834922] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[    1.835568] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.835643] ata9.00: irq_stat 0x40000001
[    1.858899] tsc: Refined TSC clocksource calibration: 3310.801 MHz
[    1.868316] random: nonblocking pool is initialized
[    1.955427] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    1.973137] usb 5-2: New USB device found, idVendor=05e3, idProduct=0610
[    1.973141] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.973143] usb 5-2: Product: USB2.0 Hub
[    1.973145] usb 5-2: Manufacturer: GenesysLogic
[    1.974289] hub 5-2:1.0: USB hub found
[    1.975137] hub 5-2:1.0: 4 ports detected
[    2.038426] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[    2.038439] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[    2.045431] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    2.045440] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    2.045445] systemd[1]: Cannot add dependency job for unit NetworkManager-wait-online.service, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory.
[    2.055384] fuse init (API version 7.23)
[    2.075851] systemd-udevd[227]: starting version 215
[    2.091064] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.117815] usb 6-2: New USB device found, idVendor=05e3, idProduct=0612
[    2.117817] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.117819] usb 6-2: Product: USB3.0 Hub
[    2.117821] usb 6-2: Manufacturer: GenesysLogic
[    2.118438] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.118442] ACPI: Power Button [PWRB]
[    2.118483] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.118485] ACPI: Power Button [PWRF]
[    2.119572] hub 6-2:1.0: USB hub found
[    2.120176] hub 6-2:1.0: 4 ports detected
[    2.121631] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.121818] acpi device:46: registered as cooling_device4
[    2.121875] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.122441] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.122868] wmi: Mapper loaded
[    2.123294] mei_me 0000:00:16.0: irq 73 for MSI/MSI-X
[    2.128436] [drm] Initialized drm 1.1.0 20060810
[    2.140899] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.140905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.140907] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.140909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.140910] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.140912] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.140913] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.141800] i915 0000:00:02.0: enabling device (0006 -> 0007)
[    2.142063] [drm] Memory usable by graphics device = 2048M
[    2.142065] [drm] Replacing VGA console driver
[    2.143228] Console: switching to colour dummy device 80x25
[    2.148275] MXM: GUID detected in BIOS
[    2.160426] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[    2.163153] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    2.165341] systemd-journald[221]: Received request to flush runtime journal from PID 1
[    2.166629] i915 0000:00:02.0: irq 74 for MSI/MSI-X
[    2.166640] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.166641] [drm] Driver supports precise vblank timestamp query.
[    2.169350] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.169352] [drm] This can cause pipe underruns and display issues.
[    2.169353] [drm] Please upgrade your BIOS to fix this.
[    2.174868] AVX version of gcm_enc/dec engaged.
[    2.176372] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    2.188184] alg: No test for crc32 (crc32-pclmul)
[    2.192924] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    2.192929] ata9.00: irq_stat 0x40000001
[    2.194201] kvm: disabled by bios
[    2.196406] intel_rapl: Found RAPL domain package
[    2.196409] intel_rapl: Found RAPL domain core
[    2.196410] intel_rapl: Found RAPL domain uncore
[    2.215447] kvm: disabled by bios
[    2.220785] iTCO_vendor_support: vendor-support=0
[    2.220977] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.221005] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    2.221173] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.221580] asus_wmi: ASUS WMI generic driver loaded
[    2.222020] asus_wmi: Initialization: 0x0
[    2.222036] asus_wmi: BIOS WMI version: 0.9
[    2.222060] asus_wmi: SFUN value: 0x0
[    2.222255] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[    2.222767] asus_wmi: Backlight controlled by ACPI video driver
[    2.238533] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    2.254711] i915 0000:00:02.0: No connectors reported connected with modes
[    2.254714] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.255158] Console: switching to colour frame buffer device 128x48
[    2.256364] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.256365] i915 0000:00:02.0: registered panic notifier
[    2.266694] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.266813] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    2.267036] nouveau  [  DEVICE][0000:02:00.0] BOOT0  : 0x0a3180a2
[    2.267038] nouveau  [  DEVICE][0000:02:00.0] Chipset: GT215 (NVA3)
[    2.267040] nouveau  [  DEVICE][0000:02:00.0] Family : NV50
[    2.267058] nouveau  [   VBIOS][0000:02:00.0] checking PRAMIN for image...
[    2.337879] nouveau  [   VBIOS][0000:02:00.0] ... appears to be valid
[    2.337880] nouveau  [   VBIOS][0000:02:00.0] using image from PRAMIN
[    2.337957] nouveau  [   VBIOS][0000:02:00.0] BIT signature found
[    2.337959] nouveau  [   VBIOS][0000:02:00.0] version 70.15.24.00.00
[    2.358086] nouveau 0000:02:00.0: irq 75 for MSI/MSI-X
[    2.358097] nouveau  [     PMC][0000:02:00.0] MSI interrupts enabled
[    2.358122] nouveau  [     PFB][0000:02:00.0] RAM type: DDR3
[    2.358123] nouveau  [     PFB][0000:02:00.0] RAM size: 1024 MiB
[    2.358124] nouveau  [     PFB][0000:02:00.0]    ZCOMP: 2048 tags
[    2.359140] nouveau  [    VOLT][0000:02:00.0] GPU voltage: 800000uv
[    2.390389] usb 7-1: new high-speed USB device number 2 using ehci-pci
[    2.522661] usb 7-1: New USB device found, idVendor=8087, idProduct=0024
[    2.522664] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.523074] hub 7-1:1.0: USB hub found
[    2.523275] hub 7-1:1.0: 6 ports detected
[    2.634172] usb 8-1: new high-speed USB device number 2 using ehci-pci
[    2.766429] usb 8-1: New USB device found, idVendor=8087, idProduct=0024
[    2.766431] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.766828] hub 8-1:1.0: USB hub found
[    2.767048] hub 8-1:1.0: 8 ports detected
[    2.838378] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.858904] usb 2-2.1: New USB device found, idVendor=05e3, idProduct=0743
[    2.858906] usb 2-2.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    2.858907] usb 2-2.1: Product: USB Storage
[    2.858908] usb 2-2.1: Manufacturer: Generic
[    2.858909] usb 2-2.1: SerialNumber: 000000000813
[    2.863529] usb-storage 2-2.1:1.0: USB Mass Storage device detected
[    2.863794] scsi16 : usb-storage 2-2.1:1.0
[    2.863861] usbcore: registered new interface driver usb-storage
[    2.901928] Switched to clocksource tsc
[    2.929884] usb 5-2.3: new low-speed USB device number 3 using xhci_hcd
[    3.025613] usb 5-2.3: New USB device found, idVendor=046d, idProduct=c069
[    3.025615] usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.025616] usb 5-2.3: Product: USB Laser Mouse
[    3.025617] usb 5-2.3: Manufacturer: Logitech
[    3.025720] usb 5-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.033044] hidraw: raw HID events driver (C) Jiri Kosina
[    3.037167] usbcore: registered new interface driver usbhid
[    3.037168] usbhid: USB HID core driver
[    3.038026] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/0000:07:07.0/0000:0d:00.0/usb5/5-2/5-2.3/5-2.3:1.0/0003:046D:C069.0001/input/input8
[    3.038092] hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:0d:00.0-2.3/input0
[    3.102093] usb 6-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[    3.122538] usb 6-2.1: New USB device found, idVendor=05e3, idProduct=0743
[    3.122540] usb 6-2.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    3.122541] usb 6-2.1: Product: USB Storage
[    3.122542] usb 6-2.1: Manufacturer: Generic
[    3.122543] usb 6-2.1: SerialNumber: 000000000813
[    3.123314] usb-storage 6-2.1:1.0: USB Mass Storage device detected
[    3.123693] scsi17 : usb-storage 6-2.1:1.0
[    3.193629] usb 7-1.4: new low-speed USB device number 3 using ehci-pci
[    3.213628] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.289006] usb 7-1.4: New USB device found, idVendor=046a, idProduct=0011
[    3.289008] usb 7-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.292271] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1a.0/usb7/7-1/7-1.4/7-1.4:1.0/0003:046A:0011.0002/input/input9
[    3.292487] hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:1a.0-1.4/input0
[    3.361469] usb 8-1.7: new full-speed USB device number 3 using ehci-pci
[    3.454097] usb 8-1.7: New USB device found, idVendor=0cf3, idProduct=3000
[    3.454099] usb 8-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.460477] Bluetooth: Core ver 2.19
[    3.460486] NET: Registered protocol family 31
[    3.460487] Bluetooth: HCI device and connection manager initialized
[    3.460492] Bluetooth: HCI socket layer initialized
[    3.460494] Bluetooth: L2CAP socket layer initialized
[    3.460499] Bluetooth: SCO socket layer initialized
[    3.461046] usb 8-1.7: firmware: failed to load ath3k-1.fw (-2)
[    3.461067] usb 8-1.7: Direct firmware load failed with error -2
[    3.461068] usb 8-1.7: Falling back to user helper
[    3.461298] Bluetooth: Firmware file "ath3k-1.fw" request failed (err=-12)
[    3.461319] ath3k: probe of 8-1.7:1.0 failed with error -12
[    3.461328] usbcore: registered new interface driver ath3k
[    3.637218] nouveau  [  PTHERM][0000:02:00.0] FAN control: PWM
[    3.637226] nouveau  [  PTHERM][0000:02:00.0] fan management: automatic
[    3.637248] nouveau  [  PTHERM][0000:02:00.0] internal sensor: yes
[    3.637265] nouveau  [     CLK][0000:02:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[    3.637267] nouveau  [     CLK][0000:02:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[    3.637269] nouveau  [     CLK][0000:02:00.0] 0f: core 550 MHz shader 1340 MHz memory 790 MHz
[    3.637284] nouveau  [     CLK][0000:02:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[    3.637464] [TTM] Zone  kernel: Available graphics memory: 6118414 kiB
[    3.637465] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.637466] [TTM] Initializing pool allocator
[    3.637470] [TTM] Initializing DMA pool allocator
[    3.637478] nouveau  [     DRM] VRAM: 1024 MiB
[    3.637479] nouveau  [     DRM] GART: 1048576 MiB
[    3.637481] nouveau  [     DRM] TMDS table version 2.0
[    3.637483] nouveau  [     DRM] DCB version 4.0
[    3.637484] nouveau  [     DRM] DCB outp 00: 01000302 00020030
[    3.637485] nouveau  [     DRM] DCB outp 01: 02000300 00000000
[    3.637486] nouveau  [     DRM] DCB outp 02: 01032310 00000000
[    3.637487] nouveau  [     DRM] DCB outp 03: 02021362 00020010
[    3.637488] nouveau  [     DRM] DCB conn 00: 00001030
[    3.637489] nouveau  [     DRM] DCB conn 01: 00002161
[    3.637490] nouveau  [     DRM] DCB conn 02: 00000200
[    3.652536] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.652538] [drm] Driver supports precise vblank timestamp query.
[    3.670975] nouveau  [     DRM] MM: using COPY for buffer copies
[    3.774595] nouveau  [     DRM] allocated 1920x1080 fb: 0x70000, bo ffff8800a56e1c00
[    3.774670] fbcon: nouveaufb (fb1) is primary device
[    3.774670] fbcon: Remapping primary device, fb1, to tty 1-63
[    3.864312] scsi 16:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0813 PQ: 0 ANSI: 5
[    3.864461] sd 16:0:0:0: Attached scsi generic sg9 type 0
[    3.865953] sd 16:0:0:0: [sdh] Attached SCSI removable disk
[    4.010080] nouveau 0000:02:00.0: fb1: nouveaufb frame buffer device
[    4.010084] [drm] Initialized nouveau 1.1.2 20120801 for 0000:02:00.0 on minor 1
[    4.010213] snd_hda_intel 0000:02:00.1: Disabling MSI
[    4.010219] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    4.121741] scsi 17:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0813 PQ: 0 ANSI: 5
[    4.122020] sd 17:0:0:0: Attached scsi generic sg10 type 0
[    4.123976] sd 17:0:0:0: [sdi] Attached SCSI removable disk
[    4.176921] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
[    4.280696] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
[    4.280814] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    4.349264] RPC: Registered named UNIX socket transport module.
[    4.349267] RPC: Registered udp transport module.
[    4.349269] RPC: Registered tcp transport module.
[    4.349270] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.351952] FS-Cache: Loaded
[    4.357398] FS-Cache: Netfs 'nfs' registered for caching
[    4.363177] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.553907] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input10
[    5.554054] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input11
[    5.554173] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input12
[    5.554297] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input13
[   26.121981] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[   26.121987] e1000e 0000:00:19.0 eth1: 10/100 speed: disabling TSO
[   26.122025] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   28.501312] EXT4-fs (sdg1): warning: maximal mount count reached, running e2fsck is recommended
[   28.502263] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
 


bloc à supprimer si la commande n’affiche rien

Dernière modification par autrekrikri (27-01-2016 17:41:29)

Hors ligne

#34 27-01-2016 18:27:13

stephgarg
Membre
Lieu : Périgueux
Distrib. : Debian GNU/Linux Stable (Jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : KDE 4.14.2
Inscription : 01-01-2015

Re : [résolu]Freeze intempestifs

Bonjour à tous.

autrekrikri a écrit :

Pas de problème, par contre, c'est quoi la commande pour avoir la sortie dans un fichier ?



Sans doute en lançant la commande suivante :

dmesg > file



Comme ça, le résultat de la commande dmesg sera sauvegardé dans le fichier file dont on peut consulter son contenu avec une autre commande :

cat file



Bien entendu, tu peux choisir un nom de fichier autre que file. wink

A bientôt.


Trois PC dont un fixe Sirius, un transportable Canopus et un miniportable Arcturus. smile
Sirius : AMD Athlon 64 X2 à 3 GHz, SDRAM DDR2 800 MHz de 8 Gio, 2 WD VelociRaptor SATA2 de 1000 Go.
Canopus : Intel Core 2 Duo à 2 GHz, SDRAM DDR2 667 MHz de 4 Gio, WD Black Mobile SATA2 de 750 Go.
Arcturus : Intel Atom N270 à 1,6 Ghz, SDRAM DDR2 533 MHz de 2 Gio, Hitachi SATA2 de 160 Go.

Hors ligne

#35 27-01-2016 18:59:30

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

Ça l'a refait, à l'instant même, je regardait un film en surfant sur le web et le film s'est "bloqué", un peu comme si le disque sautait, et là, plus accès à rien ...
Obligé d'éteindre à la "barbare" ...
Ça fait suer.
P.S. @stephgarg : grillé d'une bonne heure (*rire maléfique wink )

Hors ligne

#36 27-01-2016 19:01:00

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [résolu]Freeze intempestifs

autrekrikri a écrit :

je regardait un film en surfant sur le web et le film s'est "bloqué"

Normal : t'as pas l'âge ...  tongue


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#37 27-01-2016 19:33:50

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

paskal a écrit :

autrekrikri a écrit :

je regardait un film en surfant sur le web et le film s'est "bloqué"

Normal : t'as pas l'âge ...  tongue


ahah
Merci paskal, tu m'as fait rire et ça, ça faisait un moment que ce n'était pas arrivé. #vdm
Sinon pour préciser, j'utilisais chromium et SMplayer (et il y a SM dans SMplayer wink ) en même temps.
Il est déjà arrivé que cela ne "freeze" que lors de l'utilisation de vlc ...

Dernière modification par autrekrikri (27-01-2016 19:34:25)

Hors ligne

#38 27-01-2016 19:37:04

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [résolu]Freeze intempestifs

As-tu exploré la piste du pilote vidéo ? Ou la taille de la mémoire disponible (je ne saurais pas trop t'aider en ce sens) ?

autrekrikri a écrit :

SMplayer (et il y a SM dans SMplayer wink ) en même temps.

Parfois, je me demande si je n'utilise pas SMDebian.  big_smile


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#39 27-01-2016 20:09:53

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : [résolu]Freeze intempestifs

Bonsoir,

cat file


oui si tu pouvais donné la fin stp

Pour l'instant je n'ai vu aucun problème. Cependant ta Debian te murmure quelques mots : je te traduits tongue

Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.166641] [drm] Driver supports precise vblank timestamp query.
[    2.169350] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.169352] [drm] This can cause pipe underruns and display issues.
[    2.169353] [drm] Please upgrade your BIOS to fix this.


Met à jour ton Bios

firmware: failed to load ath3k-1.fw (-2)
[    3.461067] usb 8-1.7: Direct firmware load failed with error -2
[    3.461068] usb 8-1.7: Falling back to user helper
[    3.461298] Bluetooth: Firmware file "ath3k-1.fw" request failed (err=-12)
[    3.461319] ath3k: probe of 8-1.7:1.0 failed with error -12


il te manque ton firmware Bluetooth

voilà c'est tout pour le moment

Dernière modification par greenmerlin (27-01-2016 20:10:25)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#40 27-01-2016 23:29:23

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

greenmerlin a écrit :

Bonsoir,

cat file


oui si tu pouvais donné la fin stp

Pour l'instant je n'ai vu aucun problème. Cependant ta Debian te murmure quelques mots : je te traduits tongue

Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.166641] [drm] Driver supports precise vblank timestamp query.
[    2.169350] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.169352] [drm] This can cause pipe underruns and display issues.
[    2.169353] [drm] Please upgrade your BIOS to fix this.


Met à jour ton Bios

firmware: failed to load ath3k-1.fw (-2)
[    3.461067] usb 8-1.7: Direct firmware load failed with error -2
[    3.461068] usb 8-1.7: Falling back to user helper
[    3.461298] Bluetooth: Firmware file "ath3k-1.fw" request failed (err=-12)
[    3.461319] ath3k: probe of 8-1.7:1.0 failed with error -12


il te manque ton firmware Bluetooth

voilà c'est tout pour le moment



Bonsoir,
j'ai installé les firmware atheros, du coup, plus de problème de buetooth,
il faut que je regarde du côté de la mise à jour du bios chez asus.
Pour le retour, je copie colle tout:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f6a3a3e5-a9bf-4a86-85c1-4e338cb8c195 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000aa771fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa772000-0x00000000aa7c8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aa7c9000-0x00000000aab5bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aab5c000-0x00000000aab5efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aab5f000-0x00000000aada4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aada5000-0x00000000aadb5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aadb6000-0x00000000aadccfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aadcd000-0x00000000aadcefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aadcf000-0x00000000aadd6fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aadd7000-0x00000000aade1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aade2000-0x00000000aae3dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aae3e000-0x00000000aae80fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aae81000-0x00000000aaffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ab800000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000034fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z68 DELUXE, BIOS 0501 05/09/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 0AB800000 mask FFF800000 uncachable
[    0.000000]   2 base 0AC000000 mask FFC000000 uncachable
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   5 base 34FE00000 mask FFFE00000 uncachable
[    0.000000]   6 base 350000000 mask FF0000000 uncachable
[    0.000000]   7 base 360000000 mask FE0000000 uncachable
[    0.000000]   8 base 380000000 mask F80000000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xab800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fce50-0x000fce5f] mapped at [ffff8800000fce50]
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x34fc00000-0x34fdfffff]
[    0.000000]  [mem 0x34fc00000-0x34fdfffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x34c000000-0x34fbfffff]
[    0.000000]  [mem 0x34c000000-0x34fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x300000000-0x34bffffff]
[    0.000000]  [mem 0x300000000-0x34bffffff] page 2M
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xaa771fff]
[    0.000000]  [mem 0x40200000-0xaa5fffff] page 2M
[    0.000000]  [mem 0xaa600000-0xaa771fff] page 4k
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xaadcd000-0xaadcefff]
[    0.000000]  [mem 0xaadcd000-0xaadcefff] page 4k
[    0.000000] init_memory_mapping: [mem 0xaae81000-0xaaffffff]
[    0.000000]  [mem 0xaae81000-0xaaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[    0.000000]  [mem 0x100000000-0x2ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x3637a000-0x371b4fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0420 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000AA7BE068 00004C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000AA7C7DD8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000AA7BE140 009C95 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000AADD9F80 000040
[    0.000000] ACPI: APIC 0x00000000AA7C7ED0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000AA7C7F48 000102 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000AA7C8050 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000AA7C8090 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000034fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x34fdfffff]
[    0.000000]   NODE_DATA [mem 0x34fdef000-0x34fdf3fff]
[    0.000000]  [ffffea0000000000-ffffea000b9fffff] PMD -> [ffff880343400000-ffff88034ddfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x34fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xaa771fff]
[    0.000000]   node   0: [mem 0xaadcd000-0xaadcefff]
[    0.000000]   node   0: [mem 0xaae81000-0xaaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x34fdfffff]
[    0.000000] On node 0 totalpages: 3121806
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 155 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9482 pages used for memmap
[    0.000000]   DMA32 zone: 693491 pages, LIFO batch:31
[    0.000000]   Normal zone: 33145 pages used for memmap
[    0.000000]   Normal zone: 2424320 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa772000-0xaa7c8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa7c9000-0xaab5bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaab5c000-0xaab5efff]
[    0.000000] PM: Registered nosave memory: [mem 0xaab5f000-0xaada4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaada5000-0xaadb5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaadb6000-0xaadccfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaadcf000-0xaadd6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaadd7000-0xaade1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaade2000-0xaae3dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaae3e000-0xaae80fff]
[    0.000000] PM: Registered nosave memory: [mem 0xab000000-0xab7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xab800000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88034fa00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3078968
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f6a3a3e5-a9bf-4a86-85c1-4e338cb8c195 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12219908K/12487224K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 267316K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3310.952 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6621.90 BogoMIPS (lpj=13243808)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20140424
[    0.003900] ACPI: All ACPI Tables successfully acquired
[    0.003920] Security Framework initialized
[    0.003926] AppArmor: AppArmor disabled by boot time parameter
[    0.003927] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.004632] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.006999] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008016] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008030] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008231] Initializing cgroup subsys memory
[    0.008234] Initializing cgroup subsys devices
[    0.008239] Initializing cgroup subsys freezer
[    0.008241] Initializing cgroup subsys net_cls
[    0.008244] Initializing cgroup subsys blkio
[    0.008246] Initializing cgroup subsys perf_event
[    0.008248] Initializing cgroup subsys net_prio
[    0.008266] CPU: Physical Processor ID: 0
[    0.008266] CPU: Processor Core ID: 0
[    0.008270] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.008272] mce: CPU supports 9 MCE banks
[    0.008282] CPU0: Thermal monitoring enabled (TM1)
[    0.008287] process: using mwait in idle threads
[    0.008290] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.008367] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.442155] ftrace: allocating 21679 entries in 85 pages
[    0.449631] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.489279] smpboot: CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[    0.489284] TSC deadline timer enabled
[    0.489301] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.489315] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.489317] ... version:                3
[    0.489317] ... bit width:              48
[    0.489318] ... generic registers:      8
[    0.489319] ... value mask:             0000ffffffffffff
[    0.489319] ... max period:             0000ffffffffffff
[    0.489320] ... fixed-purpose events:   3
[    0.489321] ... event mask:             00000007000000ff
[    0.490374] x86: Booting SMP configuration:
[    0.490376] .... node  #0, CPUs:      #1
[    0.503435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.503514]  #2 #3
[    0.529849] x86: Booted up 1 node, 4 CPUs
[    0.529851] smpboot: Total of 4 processors activated (26487.61 BogoMIPS)
[    0.532132] devtmpfs: initialized
[    0.534659] PM: Registering ACPI NVS region [mem 0xaa772000-0xaa7c8fff] (356352 bytes)
[    0.534666] PM: Registering ACPI NVS region [mem 0xaab5c000-0xaab5efff] (12288 bytes)
[    0.534667] PM: Registering ACPI NVS region [mem 0xaada5000-0xaadb5fff] (69632 bytes)
[    0.534670] PM: Registering ACPI NVS region [mem 0xaadd7000-0xaade1fff] (45056 bytes)
[    0.534671] PM: Registering ACPI NVS region [mem 0xaae3e000-0xaae80fff] (274432 bytes)
[    0.535314] pinctrl core: initialized pinctrl subsystem
[    0.535368] NET: Registered protocol family 16
[    0.535455] cpuidle: using governor ladder
[    0.535457] cpuidle: using governor menu
[    0.535486] ACPI: bus type PCI registered
[    0.535487] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.535548] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.535549] PCI: not using MMCONFIG
[    0.535550] PCI: Using configuration type 1 for base access
[    0.550188] ACPI: Added _OSI(Module Device)
[    0.550189] ACPI: Added _OSI(Processor Device)
[    0.550190] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.550191] ACPI: Added _OSI(Processor Aggregator Device)
[    0.551543] ACPI: Executed 1 blocks of module-level executable AML code
[    0.553210] ACPI: Dynamic OEM Table Load:
[    0.553214] ACPI: SSDT 0xFFFF880342B5E000 0003E0 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.553476] ACPI: Dynamic OEM Table Load:
[    0.553479] ACPI: SSDT 0xFFFF880342B57A00 000120 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.553967] ACPI: Interpreter enabled
[    0.553973] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.553981] ACPI: (supports S0 S1 S3 S4 S5)
[    0.553982] ACPI: Using IOAPIC for interrupt routing
[    0.553997] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.554035] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.554103] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.554284] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.558468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.558472] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.558573] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.558664] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.558792] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.558900] PCI host bridge to bus 0000:00
[    0.558902] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.558903] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.558904] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.558906] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.558907] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff]
[    0.558908] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xffffffff]
[    0.558914] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.558975] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.558999] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.559023] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.559052] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
[    0.559074] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.559096] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.559129] pci 0000:00:02.0: [8086:0102] type 00 class 0x038000
[    0.559137] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
[    0.559142] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.559145] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.559223] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.559243] pci 0000:00:16.0: reg 0x10: [mem 0xfbf25000-0xfbf2500f 64bit]
[    0.559313] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.559377] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[    0.559394] pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
[    0.559401] pci 0000:00:19.0: reg 0x14: [mem 0xfbf24000-0xfbf24fff]
[    0.559408] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.559465] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.559493] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.559529] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.559547] pci 0000:00:1a.0: reg 0x10: [mem 0xfbf23000-0xfbf233ff]
[    0.559630] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.559660] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.559692] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.559767] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.559798] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.559832] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.559907] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.559938] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.559971] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.560045] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.560076] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.560109] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[    0.560183] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.560215] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.560250] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.560269] pci 0000:00:1d.0: reg 0x10: [mem 0xfbf22000-0xfbf223ff]
[    0.560351] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.560381] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.560415] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
[    0.560563] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.560579] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.560586] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.560593] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.560600] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.560606] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.560616] pci 0000:00:1f.2: reg 0x24: [mem 0xfbf21000-0xfbf217ff]
[    0.560656] pci 0000:00:1f.2: PME# supported from D3hot
[    0.560711] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.560724] pci 0000:00:1f.3: reg 0x10: [mem 0xfbf20000-0xfbf200ff 64bit]
[    0.560742] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.560823] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.560857] pci 0000:02:00.0: [10de:0ca3] type 00 class 0x030000
[    0.560866] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.560874] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.560882] pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.560887] pci 0000:02:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.560893] pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[    0.560960] pci 0000:02:00.1: [10de:0be4] type 00 class 0x040300
[    0.560968] pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[    0.568624] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.568627] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.568631] pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.568635] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.568725] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.568805] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.568833] pci 0000:04:00.0: reg 0x10: [mem 0xfbe00000-0xfbe01fff 64bit]
[    0.568973] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.576625] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.576632] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.576745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[    0.576773] pci 0000:05:00.0: reg 0x10: [mem 0xfbd00000-0xfbd01fff 64bit]
[    0.576913] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.584619] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.584627] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.584744] pci 0000:06:00.0: [10b5:8608] type 01 class 0x060400
[    0.584764] pci 0000:06:00.0: reg 0x10: [mem 0xfbc00000-0xfbc1ffff]
[    0.584894] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.584929] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.592610] pci 0000:00:1c.7: PCI bridge to [bus 06-10]
[    0.592615] pci 0000:00:1c.7:   bridge window [io  0x9000-0xdfff]
[    0.592620] pci 0000:00:1c.7:   bridge window [mem 0xfb800000-0xfbcfffff]
[    0.592628] pci 0000:00:1c.7:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.592787] pci 0000:07:01.0: [10b5:8608] type 01 class 0x060400
[    0.592932] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[    0.593013] pci 0000:07:04.0: [10b5:8608] type 01 class 0x060400
[    0.593157] pci 0000:07:04.0: PME# supported from D0 D3hot D3cold
[    0.593236] pci 0000:07:05.0: [10b5:8608] type 01 class 0x060400
[    0.593380] pci 0000:07:05.0: PME# supported from D0 D3hot D3cold
[    0.593461] pci 0000:07:06.0: [10b5:8608] type 01 class 0x060400
[    0.593605] pci 0000:07:06.0: PME# supported from D0 D3hot D3cold
[    0.593688] pci 0000:07:07.0: [10b5:8608] type 01 class 0x060400
[    0.593832] pci 0000:07:07.0: PME# supported from D0 D3hot D3cold
[    0.593915] pci 0000:07:08.0: [10b5:8608] type 01 class 0x060400
[    0.594059] pci 0000:07:08.0: PME# supported from D0 D3hot D3cold
[    0.594143] pci 0000:07:09.0: [10b5:8608] type 01 class 0x060400
[    0.594288] pci 0000:07:09.0: PME# supported from D0 D3hot D3cold
[    0.594388] pci 0000:06:00.0: PCI bridge to [bus 07-10]
[    0.594395] pci 0000:06:00.0:   bridge window [io  0x9000-0xdfff]
[    0.594400] pci 0000:06:00.0:   bridge window [mem 0xfb800000-0xfbbfffff]
[    0.594407] pci 0000:06:00.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.594501] pci 0000:08:00.0: [1106:3403] type 00 class 0x0c0010
[    0.594535] pci 0000:08:00.0: reg 0x10: [mem 0xfbb00000-0xfbb007ff 64bit]
[    0.594552] pci 0000:08:00.0: reg 0x18: [io  0xd000-0xd0ff]
[    0.594698] pci 0000:08:00.0: supports D2
[    0.594699] pci 0000:08:00.0: PME# supported from D2 D3hot D3cold
[    0.604614] pci 0000:07:01.0: PCI bridge to [bus 08]
[    0.604625] pci 0000:07:01.0:   bridge window [io  0xd000-0xdfff]
[    0.604631] pci 0000:07:01.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.604762] pci 0000:09:00.0: [10b5:8112] type 01 class 0x060400
[    0.604986] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.605000] pci 0000:07:04.0: PCI bridge to [bus 09-0a]
[    0.605008] pci 0000:07:04.0:   bridge window [io  0xc000-0xcfff]
[    0.605128] pci 0000:0a:04.0: [13f6:8788] type 00 class 0x040100
[    0.605168] pci 0000:0a:04.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.605360] pci 0000:0a:04.0: supports D1 D2
[    0.605469] pci 0000:09:00.0: PCI bridge to [bus 0a]
[    0.605476] pci 0000:09:00.0:   bridge window [io  0xc000-0xcfff]
[    0.605609] pci 0000:0b:00.0: [197b:2362] type 00 class 0x010185
[    0.605654] pci 0000:0b:00.0: reg 0x10: [io  0xb040-0xb047]
[    0.605672] pci 0000:0b:00.0: reg 0x14: [io  0xb030-0xb033]
[    0.605690] pci 0000:0b:00.0: reg 0x18: [io  0xb020-0xb027]
[    0.605708] pci 0000:0b:00.0: reg 0x1c: [io  0xb010-0xb013]
[    0.605727] pci 0000:0b:00.0: reg 0x20: [io  0xb000-0xb00f]
[    0.605745] pci 0000:0b:00.0: reg 0x24: [mem 0xfba10000-0xfba101ff]
[    0.605763] pci 0000:0b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.605842] pci 0000:0b:00.0: PME# supported from D3hot
[    0.616605] pci 0000:07:05.0: PCI bridge to [bus 0b]
[    0.616616] pci 0000:07:05.0:   bridge window [io  0xb000-0xbfff]
[    0.616622] pci 0000:07:05.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.616749] pci 0000:0c:00.0: [1b4b:9130] type 00 class 0x010601
[    0.616772] pci 0000:0c:00.0: reg 0x10: [io  0xa090-0xa097]
[    0.616787] pci 0000:0c:00.0: reg 0x14: [io  0xa080-0xa083]
[    0.616801] pci 0000:0c:00.0: reg 0x18: [io  0xa070-0xa077]
[    0.616815] pci 0000:0c:00.0: reg 0x1c: [io  0xa060-0xa063]
[    0.616829] pci 0000:0c:00.0: reg 0x20: [io  0xa050-0xa05f]
[    0.616843] pci 0000:0c:00.0: reg 0x24: [mem 0xfb921000-0xfb9217ff]
[    0.616858] pci 0000:0c:00.0: reg 0x30: [mem 0xfb910000-0xfb91ffff pref]
[    0.616930] pci 0000:0c:00.0: PME# supported from D3hot
[    0.617007] pci 0000:07:06.0: PCI bridge to [bus 0c]
[    0.617015] pci 0000:07:06.0:   bridge window [io  0xa000-0xafff]
[    0.617019] pci 0000:07:06.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.617123] pci 0000:0d:00.0: [1033:0194] type 00 class 0x0c0330
[    0.617158] pci 0000:0d:00.0: reg 0x10: [mem 0xfb800000-0xfb801fff 64bit]
[    0.617332] pci 0000:0d:00.0: PME# supported from D0 D3hot
[    0.624600] pci 0000:07:07.0: PCI bridge to [bus 0d]
[    0.624614] pci 0000:07:07.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.624754] pci 0000:0e:00.0: [1b21:1080] type 01 class 0x060400
[    0.624944] pci 0000:0e:00.0: supports D1 D2
[    0.624945] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.624989] pci 0000:0e:00.0: System wakeup disabled by ACPI
[    0.632592] pci 0000:07:08.0: PCI bridge to [bus 0e-0f]
[    0.632811] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[    0.632942] pci 0000:10:00.0: [10ec:8168] type 00 class 0x020000
[    0.632969] pci 0000:10:00.0: reg 0x10: [io  0x9000-0x90ff]
[    0.633009] pci 0000:10:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
[    0.633034] pci 0000:10:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.633165] pci 0000:10:00.0: supports D1 D2
[    0.633166] pci 0000:10:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.640594] pci 0000:07:09.0: PCI bridge to [bus 10]
[    0.640604] pci 0000:07:09.0:   bridge window [io  0x9000-0x9fff]
[    0.640617] pci 0000:07:09.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.641120] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.641157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.641192] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.641227] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.641262] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.641297] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.641332] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.641367] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.641419] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.641434] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.641506] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.641507] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.641509] vgaarb: loaded
[    0.641510] vgaarb: bridge control possible 0000:02:00.0
[    0.641552] PCI: Using ACPI for IRQ routing
[    0.642662] PCI: pci_cache_line_size set to 64 bytes
[    0.642767] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[    0.642768] e820: reserve RAM buffer [mem 0xaa772000-0xabffffff]
[    0.642770] e820: reserve RAM buffer [mem 0xaadcf000-0xabffffff]
[    0.642771] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[    0.642772] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
[    0.642870] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.642873] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.644892] Switched to clocksource hpet
[    0.648557] pnp: PnP ACPI init
[    0.648566] ACPI: bus type PNP registered
[    0.648662] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[    0.648664] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.648665] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.648667] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.648668] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.648671] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.648739] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.648741] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.648769] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.648809] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.648811] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.649026] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.649028] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.649029] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.649031] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.649033] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.649034] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.649035] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.649037] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.649081] system 00:05: [io  0x0454-0x0457] has been reserved
[    0.649083] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.649240] pnp: PnP ACPI: found 6 devices
[    0.649241] ACPI: bus type PNP unregistered
[    0.655353] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.655358] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.655360] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.655362] pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]
[    0.655364] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.655366] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.655376] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.655381] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.655388] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.655392] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.655400] pci 0000:07:01.0: PCI bridge to [bus 08]
[    0.655403] pci 0000:07:01.0:   bridge window [io  0xd000-0xdfff]
[    0.655410] pci 0000:07:01.0:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.655421] pci 0000:09:00.0: PCI bridge to [bus 0a]
[    0.655425] pci 0000:09:00.0:   bridge window [io  0xc000-0xcfff]
[    0.655452] pci 0000:07:04.0: PCI bridge to [bus 09-0a]
[    0.655455] pci 0000:07:04.0:   bridge window [io  0xc000-0xcfff]
[    0.655472] pci 0000:0b:00.0: BAR 6: assigned [mem 0xfba00000-0xfba0ffff pref]
[    0.655474] pci 0000:07:05.0: PCI bridge to [bus 0b]
[    0.655477] pci 0000:07:05.0:   bridge window [io  0xb000-0xbfff]
[    0.655483] pci 0000:07:05.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.655494] pci 0000:07:06.0: PCI bridge to [bus 0c]
[    0.655497] pci 0000:07:06.0:   bridge window [io  0xa000-0xafff]
[    0.655503] pci 0000:07:06.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.655514] pci 0000:07:07.0: PCI bridge to [bus 0d]
[    0.655520] pci 0000:07:07.0:   bridge window [mem 0xfb800000-0xfb8fffff]
[    0.655531] pci 0000:0e:00.0: PCI bridge to [bus 0f]
[    0.655553] pci 0000:07:08.0: PCI bridge to [bus 0e-0f]
[    0.655568] pci 0000:07:09.0: PCI bridge to [bus 10]
[    0.655571] pci 0000:07:09.0:   bridge window [io  0x9000-0x9fff]
[    0.655581] pci 0000:07:09.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.655588] pci 0000:06:00.0: PCI bridge to [bus 07-10]
[    0.655592] pci 0000:06:00.0:   bridge window [io  0x9000-0xdfff]
[    0.655598] pci 0000:06:00.0:   bridge window [mem 0xfb800000-0xfbbfffff]
[    0.655602] pci 0000:06:00.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.655610] pci 0000:00:1c.7: PCI bridge to [bus 06-10]
[    0.655613] pci 0000:00:1c.7:   bridge window [io  0x9000-0xdfff]
[    0.655617] pci 0000:00:1c.7:   bridge window [mem 0xfb800000-0xfbcfffff]
[    0.655621] pci 0000:00:1c.7:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.655627] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.655628] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.655629] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.655630] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
[    0.655631] pci_bus 0000:00: resource 8 [mem 0xafa00000-0xffffffff]
[    0.655633] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.655634] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
[    0.655635] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.655637] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.655638] pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.655639] pci_bus 0000:06: resource 0 [io  0x9000-0xdfff]
[    0.655640] pci_bus 0000:06: resource 1 [mem 0xfb800000-0xfbcfffff]
[    0.655641] pci_bus 0000:06: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.655643] pci_bus 0000:07: resource 0 [io  0x9000-0xdfff]
[    0.655644] pci_bus 0000:07: resource 1 [mem 0xfb800000-0xfbbfffff]
[    0.655645] pci_bus 0000:07: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.655646] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    0.655647] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.655648] pci_bus 0000:09: resource 0 [io  0xc000-0xcfff]
[    0.655649] pci_bus 0000:0a: resource 0 [io  0xc000-0xcfff]
[    0.655651] pci_bus 0000:0b: resource 0 [io  0xb000-0xbfff]
[    0.655652] pci_bus 0000:0b: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.655653] pci_bus 0000:0c: resource 0 [io  0xa000-0xafff]
[    0.655654] pci_bus 0000:0c: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.655655] pci_bus 0000:0d: resource 1 [mem 0xfb800000-0xfb8fffff]
[    0.655657] pci_bus 0000:10: resource 0 [io  0x9000-0x9fff]
[    0.655658] pci_bus 0000:10: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.655704] NET: Registered protocol family 2
[    0.655907] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.656086] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.656201] TCP: Hash tables configured (established 131072 bind 65536)
[    0.656214] TCP: reno registered
[    0.656227] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.656272] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.656348] NET: Registered protocol family 1
[    0.656571] pci 0000:02:00.0: Video device with shadowed ROM
[    0.656940] PCI: CLS 64 bytes, default 64
[    0.656977] Unpacking initramfs...
[    0.848131] Freeing initrd memory: 14572K (ffff88003637a000 - ffff8800371b5000)
[    0.848140] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.848142] software IO TLB [mem 0xa6772000-0xaa772000] (64MB) mapped at [ffff8800a6772000-ffff8800aa771fff]
[    0.848357] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.848391] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[    0.848397] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[    0.848401] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
[    0.848407] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
[    0.848449] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.848649] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.848676] audit: initializing netlink subsys (disabled)
[    0.848689] audit: type=2000 audit(1453917326.416:1): initialized
[    0.849005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.849021] zbud: loaded
[    0.849165] VFS: Disk quotas dquot_6.5.2
[    0.849177] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.849218] msgmni has been set to 23895
[    0.849460] alg: No test for stdrng (krng)
[    0.849479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.849514] io scheduler noop registered
[    0.849516] io scheduler deadline registered
[    0.849544] io scheduler cfq registered (default)
[    0.849675] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.849755] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    0.849841] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[    0.849909] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.849975] pcieport 0000:00:1c.6: irq 44 for MSI/MSI-X
[    0.850041] pcieport 0000:00:1c.7: irq 45 for MSI/MSI-X
[    0.850128] pcieport 0000:06:00.0: irq 46 for MSI/MSI-X
[    0.850302] pcieport 0000:07:01.0: irq 47 for MSI/MSI-X
[    0.850465] pcieport 0000:07:04.0: irq 48 for MSI/MSI-X
[    0.850629] pcieport 0000:07:05.0: irq 49 for MSI/MSI-X
[    0.850791] pcieport 0000:07:06.0: irq 50 for MSI/MSI-X
[    0.850934] pcieport 0000:07:07.0: irq 51 for MSI/MSI-X
[    0.851097] pcieport 0000:07:08.0: irq 52 for MSI/MSI-X
[    0.851261] pcieport 0000:07:09.0: irq 53 for MSI/MSI-X
[    0.851399] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.851401] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.851411] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[    0.851412] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.851414] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[    0.851415] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[    0.851430] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.851433] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.851449] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.851450] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.851453] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.851468] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    0.851469] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    0.851473] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[    0.851488] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[    0.851489] pcieport 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.851490] pcieport 0000:07:01.0: Signaling PME through PCIe PME interrupt
[    0.851491] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    0.851492] pcieport 0000:07:04.0: Signaling PME through PCIe PME interrupt
[    0.851493] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    0.851494] pci 0000:0a:04.0: Signaling PME through PCIe PME interrupt
[    0.851495] pcieport 0000:07:05.0: Signaling PME through PCIe PME interrupt
[    0.851496] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[    0.851497] pcieport 0000:07:06.0: Signaling PME through PCIe PME interrupt
[    0.851499] pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
[    0.851499] pcieport 0000:07:07.0: Signaling PME through PCIe PME interrupt
[    0.851501] pci 0000:0d:00.0: Signaling PME through PCIe PME interrupt
[    0.851502] pcieport 0000:07:08.0: Signaling PME through PCIe PME interrupt
[    0.851503] pci 0000:0e:00.0: Signaling PME through PCIe PME interrupt
[    0.851503] pcieport 0000:07:09.0: Signaling PME through PCIe PME interrupt
[    0.851505] pci 0000:10:00.0: Signaling PME through PCIe PME interrupt
[    0.851508] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[    0.851521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.851535] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.851550] intel_idle: MWAIT substates: 0x1120
[    0.851551] intel_idle: v0.4 model 0x2A
[    0.851552] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.851684] GHES: HEST is not enabled!
[    0.851732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.852014] Linux agpgart interface v0.103
[    0.852098] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.854761] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.854764] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.854854] mousedev: PS/2 mouse device common for all mice
[    0.854892] rtc_cmos 00:02: RTC can wake from S4
[    0.855004] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.855029] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.855038] Intel P-state driver initializing.
[    0.855046] Intel pstate controlling: cpu 0
[    0.855063] Intel pstate controlling: cpu 1
[    0.855076] Intel pstate controlling: cpu 2
[    0.855113] Intel pstate controlling: cpu 3
[    0.855158] ledtrig-cpu: registered to indicate activity on CPUs
[    0.855878] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.855880] AMD IOMMUv2 functionality not available on this system
[    0.855999] TCP: cubic registered
[    0.856092] NET: Registered protocol family 10
[    0.856369] mip6: Mobile IPv6
[    0.856376] NET: Registered protocol family 17
[    0.856386] mpls_gso: MPLS GSO support
[    0.856810] registered taskstats version 1
[    0.858009] rtc_cmos 00:02: setting system clock to 2016-01-27 17:55:27 UTC (1453917327)
[    0.858141] PM: Hibernation image not present or could not be loaded.
[    0.859151] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    0.859152] Write protecting the kernel read-only data: 8192k
[    0.859647] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[    0.860303] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.872148] systemd-udevd[71]: starting version 215
[    0.872484] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.881612] pps_core: LinuxPPS API ver. 1 registered
[    0.881614] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.881749] PTP clock support registered
[    0.882360] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    0.882361] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    0.882483] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.882501] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
[    0.882502] ACPI: bus type USB registered
[    0.882520] usbcore: registered new interface driver usbfs
[    0.882527] usbcore: registered new interface driver hub
[    0.882741] usbcore: registered new device driver usb
[    0.883140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.883343] ehci-pci: EHCI PCI platform driver
[    0.883422] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.883427] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[    0.883680] SCSI subsystem initialized
[    0.886060] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.886307] r8169 0000:10:00.0: irq 55 for MSI/MSI-X
[    0.886472] r8169 0000:10:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018ee000, 14:da:e9:06:47:e0, XID 0c900800 IRQ 55
[    0.886474] r8169 0000:10:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.889159] libata version 3.00 loaded.
[    0.952676] firewire_ohci 0000:08:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
[    0.992293] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X
[    0.992297] xhci_hcd 0000:04:00.0: irq 57 for MSI/MSI-X
[    0.992299] xhci_hcd 0000:04:00.0: irq 58 for MSI/MSI-X
[    0.992301] xhci_hcd 0000:04:00.0: irq 59 for MSI/MSI-X
[    0.992303] xhci_hcd 0000:04:00.0: irq 60 for MSI/MSI-X
[    0.992409] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.992411] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.992412] usb usb1: Product: xHCI Host Controller
[    0.992413] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.992414] usb usb1: SerialNumber: 0000:04:00.0
[    0.992562] hub 1-0:1.0: USB hub found
[    0.992579] hub 1-0:1.0: 2 ports detected
[    0.992664] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.992666] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    0.995630] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.995642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.995643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.995644] usb usb2: Product: xHCI Host Controller
[    0.995645] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.995646] usb usb2: SerialNumber: 0000:04:00.0
[    0.995733] hub 2-0:1.0: USB hub found
[    0.995741] hub 2-0:1.0: 2 ports detected
[    0.995875] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.995878] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    0.996046] xhci_hcd 0000:05:00.0: irq 61 for MSI/MSI-X
[    0.996049] xhci_hcd 0000:05:00.0: irq 62 for MSI/MSI-X
[    0.996051] xhci_hcd 0000:05:00.0: irq 63 for MSI/MSI-X
[    0.996055] xhci_hcd 0000:05:00.0: irq 64 for MSI/MSI-X
[    0.996057] xhci_hcd 0000:05:00.0: irq 65 for MSI/MSI-X
[    0.996149] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.996150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.996151] usb usb3: Product: xHCI Host Controller
[    0.996152] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.996153] usb usb3: SerialNumber: 0000:05:00.0
[    0.996284] hub 3-0:1.0: USB hub found
[    0.996293] hub 3-0:1.0: 2 ports detected
[    0.996380] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.996382] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    0.999455] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.999467] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.999469] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.999470] usb usb4: Product: xHCI Host Controller
[    0.999471] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.999472] usb usb4: SerialNumber: 0000:05:00.0
[    0.999617] hub 4-0:1.0: USB hub found
[    0.999626] hub 4-0:1.0: 2 ports detected
[    0.999757] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[    0.999760] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 5
[    1.108700] xhci_hcd 0000:0d:00.0: irq 66 for MSI/MSI-X
[    1.108704] xhci_hcd 0000:0d:00.0: irq 67 for MSI/MSI-X
[    1.108706] xhci_hcd 0000:0d:00.0: irq 68 for MSI/MSI-X
[    1.108708] xhci_hcd 0000:0d:00.0: irq 69 for MSI/MSI-X
[    1.108710] xhci_hcd 0000:0d:00.0: irq 70 for MSI/MSI-X
[    1.108836] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.108837] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.108839] usb usb5: Product: xHCI Host Controller
[    1.108840] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.108841] usb usb5: SerialNumber: 0000:0d:00.0
[    1.109001] hub 5-0:1.0: USB hub found
[    1.109010] hub 5-0:1.0: 2 ports detected
[    1.109085] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[    1.109088] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 6
[    1.111883] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.111894] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.111896] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111897] usb usb6: Product: xHCI Host Controller
[    1.111898] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    1.111899] usb usb6: SerialNumber: 0000:0d:00.0
[    1.112084] hub 6-0:1.0: USB hub found
[    1.112093] hub 6-0:1.0: 2 ports detected
[    1.142539] e1000e 0000:00:19.0 eth1: registered PHC clock
[    1.142541] e1000e 0000:00:19.0 eth1: (PCI Express:2.5GT/s:Width x1) 14:da:e9:06:36:e1
[    1.142543] e1000e 0000:00:19.0 eth1: Intel(R) PRO/1000 Network Connection
[    1.142576] e1000e 0000:00:19.0 eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    1.142697] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.142713] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 7
[    1.142747] ehci-pci 0000:00:1a.0: debug port 2
[    1.146654] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.146666] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfbf23000
[    1.156450] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.156508] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    1.156511] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.156513] usb usb7: Product: EHCI Host Controller
[    1.156526] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.156527] usb usb7: SerialNumber: 0000:00:1a.0
[    1.156650] hub 7-0:1.0: USB hub found
[    1.156655] hub 7-0:1.0: 2 ports detected
[    1.156851] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.156854] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    1.156864] ehci-pci 0000:00:1d.0: debug port 2
[    1.160770] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.160773] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbf22000
[    1.172434] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.172492] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.172496] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.172508] usb usb8: Product: EHCI Host Controller
[    1.172509] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    1.172510] usb usb8: SerialNumber: 0000:00:1d.0
[    1.172633] hub 8-0:1.0: USB hub found
[    1.172638] hub 8-0:1.0: 2 ports detected
[    1.172780] ahci 0000:00:1f.2: version 3.0
[    1.172861] ahci 0000:00:1f.2: irq 71 for MSI/MSI-X
[    1.188564] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3e impl SATA mode
[    1.188566] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.221496] scsi0 : ahci
[    1.221960] scsi1 : ahci
[    1.222252] scsi2 : ahci
[    1.222453] scsi3 : ahci
[    1.222800] scsi4 : ahci
[    1.223159] scsi5 : ahci
[    1.223254] ata1: DUMMY
[    1.223258] ata2: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21180 irq 71
[    1.223261] ata3: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21200 irq 71
[    1.223264] ata4: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21280 irq 71
[    1.223267] ata5: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21300 irq 71
[    1.223270] ata6: SATA max UDMA/133 abar m2048@0xfbf21000 port 0xfbf21380 irq 71
[    1.223467] ahci 0000:0b:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.223469] ahci 0000:0b:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.223804] scsi6 : ahci
[    1.223963] scsi7 : ahci
[    1.224012] ata7: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10100 irq 16
[    1.224016] ata8: SATA max UDMA/133 abar m512@0xfba10000 port 0xfba10180 irq 16
[    1.224136] ahci 0000:0c:00.0: irq 72 for MSI/MSI-X
[    1.236442] ahci 0000:0c:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    1.236446] ahci 0000:0c:00.0: flags: 64bit ncq pio
[    1.237535] scsi8 : ahci
[    1.237835] scsi9 : ahci
[    1.238107] scsi10 : ahci
[    1.238322] scsi11 : ahci
[    1.238508] scsi12 : ahci
[    1.238655] scsi13 : ahci
[    1.238788] scsi14 : ahci
[    1.238892] scsi15 : ahci
[    1.238945] ata9: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921100 irq 72
[    1.238950] ata10: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921180 irq 72
[    1.238953] ata11: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921200 irq 72
[    1.238957] ata12: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921280 irq 72
[    1.238960] ata13: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921300 irq 72
[    1.238963] ata14: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921380 irq 72
[    1.238967] ata15: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921400 irq 72
[    1.238971] ata16: SATA max UDMA/133 abar m2048@0xfb921000 port 0xfb921480 irq 72
[    1.320295] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.454245] usb 1-2: New USB device found, idVendor=05e3, idProduct=0610
[    1.454249] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.454252] usb 1-2: Product: USB2.0 Hub
[    1.454254] usb 1-2: Manufacturer: GenesysLogic
[    1.455396] hub 1-2:1.0: USB hub found
[    1.456207] hub 1-2:1.0: 4 ports detected
[    1.488294] firewire_core 0000:08:00.0: created device fw0: GUID 001fc6000014957d, S400
[    1.540144] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.540150] ata7: SATA link down (SStatus 0 SControl 300)
[    1.540203] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.540206] ata8: SATA link down (SStatus 0 SControl 300)
[    1.540234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.540255] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.540274] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.541109] ata3.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[    1.541113] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.541291] ata6.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133
[    1.541296] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.542115] ata3.00: configured for UDMA/133
[    1.542217] ata2.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[    1.542221] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.542512] ata6.00: configured for UDMA/133
[    1.552083] ata2.00: configured for UDMA/133
[    1.552281] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[    1.552511] ata5.00: ATA-8: KINGSTON SV300S37A120G, 506ABBF0, max UDMA/133
[    1.552515] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.552909] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
[    1.556112] ata13: SATA link down (SStatus 0 SControl 300)
[    1.560101] ata11: SATA link down (SStatus 0 SControl 300)
[    1.562358] ata5.00: configured for UDMA/133
[    1.564088] ata12: SATA link down (SStatus 0 SControl 300)
[    1.564141] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.564179] ata14: SATA link down (SStatus 0 SControl 300)
[    1.564223] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.564260] ata15: SATA link down (SStatus 0 SControl 300)
[    1.568375] ata4.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
[    1.568379] ata4.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.572509] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    1.573812] ata4.00: configured for UDMA/133
[    1.574017] scsi 3:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    1.574560] scsi 4:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[    1.575215] scsi 5:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 AAB0 PQ: 0 ANSI: 5
[    1.595366] usb 2-2: New USB device found, idVendor=05e3, idProduct=0612
[    1.595370] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.595373] usb 2-2: Product: USB3.0 Hub
[    1.595375] usb 2-2: Manufacturer: GenesysLogic
[    1.597389] hub 2-2:1.0: USB hub found
[    1.597984] hub 2-2:1.0: 4 ports detected
[    1.670572] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[    1.670893] ata16.00: configured for UDMA/66
[    1.671098] ata9.00: ATAPI: ATAPI   iHOS104, WL0F, max UDMA/100
[    1.671947] ata9.00: configured for UDMA/100
[    1.676003] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.677097] ata10.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[    1.677101] ata10.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.678395] ata10.00: configured for UDMA/133
[    1.697123] scsi 8:0:0:0: CD-ROM            ATAPI    iHOS104          WL0F PQ: 0 ANSI: 5
[    1.713145] scsi 9:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
[    1.714103] scsi 15:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5
[    1.727940] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[    1.728007] ata16.00: irq_stat 0x40000001
[    1.728069] scsi 15:0:0:0: CDB:
[    1.728071] Inquiry: 12 01 00 00 ff 00
[    1.728081] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
         res 50/00:03:00:14:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[    1.728153] ata16.00: status: { DRDY }
[    1.732749] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.732796] sd 1:0:0:0: [sda] Write Protect is off
[    1.732800] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.733200] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.733203] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    1.733238] sd 2:0:0:0: [sdb] Write Protect is off
[    1.733241] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.733282] sd 4:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.733286] sd 3:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.733349] sd 4:0:0:0: [sdd] Write Protect is off
[    1.733352] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.733358] sd 3:0:0:0: [sdc] Write Protect is off
[    1.733362] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.733368] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.733447] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.733622] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.733627] sd 5:0:0:0: [sde] 4096-byte physical blocks
[    1.733649] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.733673] sd 5:0:0:0: [sde] Write Protect is off
[    1.733676] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    1.733692] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.733905] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.733943] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.734187] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.734235] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    1.734276] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    1.734328] sd 5:0:0:0: Attached scsi generic sg4 type 0
[    1.734376] sr 8:0:0:0: Attached scsi generic sg5 type 5
[    1.734423] scsi 9:0:0:0: Attached scsi generic sg6 type 0
[    1.734469] scsi 15:0:0:0: Attached scsi generic sg7 type 3
[    1.734775]  sda: sda1
[    1.735026] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.735485]  sdd: sdd1
[    1.735712] sd 4:0:0:0: [sdd] Attached SCSI disk
[    1.736255]  sdc: sdc1 sdc2
[    1.736670] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.750418] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[    1.750422] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.750638] sr 8:0:0:0: Attached scsi CD-ROM sr0
[    1.750809] sd 9:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.750936] sd 9:0:0:0: [sdf] Write Protect is off
[    1.750940] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[    1.750961] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.755307]  sdf: sdf1
[    1.755695] sd 9:0:0:0: [sdf] Attached SCSI disk
[    1.758037]  sdb: sdb1
[    1.758255] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.772089]  sde: sde1
[    1.772400] sd 5:0:0:0: [sde] Attached SCSI disk
[    1.811827] usb 5-2: new high-speed USB device number 2 using xhci_hcd
[    1.824425] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.824490] ata9.00: irq_stat 0x40000001
[    1.840409] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.840484] ata9.00: irq_stat 0x40000001
[    1.843790] tsc: Refined TSC clocksource calibration: 3310.801 MHz
[    1.945748] usb 5-2: New USB device found, idVendor=05e3, idProduct=0610
[    1.945752] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.945755] usb 5-2: Product: USB2.0 Hub
[    1.945757] usb 5-2: Manufacturer: GenesysLogic
[    1.946953] hub 5-2:1.0: USB hub found
[    1.947787] hub 5-2:1.0: 4 ports detected
[    1.959381] random: nonblocking pool is initialized
[    2.064009] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.086889] usb 6-2: New USB device found, idVendor=05e3, idProduct=0612
[    2.086904] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.086907] usb 6-2: Product: USB3.0 Hub
[    2.086909] usb 6-2: Manufacturer: GenesysLogic
[    2.088893] hub 6-2:1.0: USB hub found
[    2.089466] hub 6-2:1.0: 4 ports detected
[    2.239081] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.303353] usb 7-1: new high-speed USB device number 2 using ehci-pci
[    2.329233] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[    2.329247] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[    2.336496] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    2.336507] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    2.336513] systemd[1]: Cannot add dependency job for unit NetworkManager-wait-online.service, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory.
[    2.346609] fuse init (API version 7.23)
[    2.362671] systemd-udevd[220]: starting version 215
[    2.407024] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.407028] ACPI: Power Button [PWRB]
[    2.407151] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.407153] ACPI: Power Button [PWRF]
[    2.407697] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.407900] acpi device:46: registered as cooling_device2
[    2.407960] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.409993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.410118] wmi: Mapper loaded
[    2.410523] mei_me 0000:00:16.0: irq 73 for MSI/MSI-X
[    2.416657] [drm] Initialized drm 1.1.0 20060810
[    2.429955] i915 0000:00:02.0: enabling device (0006 -> 0007)
[    2.433709] [drm] Memory usable by graphics device = 2048M
[    2.433712] [drm] Replacing VGA console driver
[    2.434841] Console: switching to colour dummy device 80x25
[    2.435616] usb 7-1: New USB device found, idVendor=8087, idProduct=0024
[    2.435617] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.435762] hub 7-1:1.0: USB hub found
[    2.436338] hub 7-1:1.0: 6 ports detected
[    2.441913] MXM: GUID detected in BIOS
[    2.451053] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.459263] i915 0000:00:02.0: irq 74 for MSI/MSI-X
[    2.459279] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.459279] [drm] Driver supports precise vblank timestamp query.
[    2.461163] AVX version of gcm_enc/dec engaged.
[    2.462406] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.462414] [drm] This can cause pipe underruns and display issues.
[    2.462415] [drm] Please upgrade your BIOS to fix this.
[    2.463895] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    2.469446] alg: No test for crc32 (crc32-pclmul)
[    2.471851] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.474769] kvm: disabled by bios
[    2.478909] systemd-journald[221]: Received request to flush runtime journal from PID 1
[    2.482272] intel_rapl: Found RAPL domain package
[    2.482275] intel_rapl: Found RAPL domain core
[    2.482277] intel_rapl: Found RAPL domain uncore
[    2.487846] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    2.487851] ata9.00: irq_stat 0x40000001
[    2.509029] kvm: disabled by bios
[    2.509773] asus_wmi: ASUS WMI generic driver loaded
[    2.510221] asus_wmi: Initialization: 0x0
[    2.510236] asus_wmi: BIOS WMI version: 0.9
[    2.510270] asus_wmi: SFUN value: 0x0
[    2.510460] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[    2.510927] asus_wmi: Backlight controlled by ACPI video driver
[    2.531131] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    2.547159] i915 0000:00:02.0: No connectors reported connected with modes
[    2.547162] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.547687] Console: switching to colour frame buffer device 128x48
[    2.548892] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.548893] i915 0000:00:02.0: registered panic notifier
[    2.551122] usb 8-1: new high-speed USB device number 2 using ehci-pci
[    2.558391] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.558481] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.558485] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.558486] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.558489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.558489] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.558491] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.558492] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.558562] nouveau  [  DEVICE][0000:02:00.0] BOOT0  : 0x0a3180a2
[    2.558564] nouveau  [  DEVICE][0000:02:00.0] Chipset: GT215 (NVA3)
[    2.558565] nouveau  [  DEVICE][0000:02:00.0] Family : NV50
[    2.558583] nouveau  [   VBIOS][0000:02:00.0] checking PRAMIN for image...
[    2.558850] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    2.559716] iTCO_vendor_support: vendor-support=0
[    2.559948] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.559972] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    2.561085] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.631894] nouveau  [   VBIOS][0000:02:00.0] ... appears to be valid
[    2.631896] nouveau  [   VBIOS][0000:02:00.0] using image from PRAMIN
[    2.631966] nouveau  [   VBIOS][0000:02:00.0] BIT signature found
[    2.631967] nouveau  [   VBIOS][0000:02:00.0] version 70.15.24.00.00
[    2.652056] nouveau 0000:02:00.0: irq 75 for MSI/MSI-X
[    2.652063] nouveau  [     PMC][0000:02:00.0] MSI interrupts enabled
[    2.652086] nouveau  [     PFB][0000:02:00.0] RAM type: DDR3
[    2.652087] nouveau  [     PFB][0000:02:00.0] RAM size: 1024 MiB
[    2.652088] nouveau  [     PFB][0000:02:00.0]    ZCOMP: 2048 tags
[    2.653070] nouveau  [    VOLT][0000:02:00.0] GPU voltage: 800000uv
[    2.683453] usb 8-1: New USB device found, idVendor=8087, idProduct=0024
[    2.683456] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.683722] hub 8-1:1.0: USB hub found
[    2.683941] hub 8-1:1.0: 8 ports detected
[    2.755327] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.775867] usb 2-2.1: New USB device found, idVendor=05e3, idProduct=0743
[    2.775869] usb 2-2.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    2.775871] usb 2-2.1: Product: USB Storage
[    2.775872] usb 2-2.1: Manufacturer: Generic
[    2.775873] usb 2-2.1: SerialNumber: 000000000813
[    2.780389] usb-storage 2-2.1:1.0: USB Mass Storage device detected
[    2.780532] scsi16 : usb-storage 2-2.1:1.0
[    2.780581] usbcore: registered new interface driver usb-storage
[    2.846844] usb 5-2.3: new low-speed USB device number 3 using xhci_hcd
[    2.874888] Switched to clocksource tsc
[    2.954434] usb 5-2.3: New USB device found, idVendor=046d, idProduct=c069
[    2.954437] usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.954438] usb 5-2.3: Product: USB Laser Mouse
[    2.954439] usb 5-2.3: Manufacturer: Logitech
[    2.954531] usb 5-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.961988] hidraw: raw HID events driver (C) Jiri Kosina
[    2.966247] usbcore: registered new interface driver usbhid
[    2.966249] usbhid: USB HID core driver
[    2.967122] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/0000:07:07.0/0000:0d:00.0/usb5/5-2/5-2.3/5-2.3:1.0/0003:046D:C069.0001/input/input8
[    2.967199] hid-generic 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:0d:00.0-2.3/input0
[    3.031043] usb 6-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[    3.051484] usb 6-2.1: New USB device found, idVendor=05e3, idProduct=0743
[    3.051486] usb 6-2.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    3.051487] usb 6-2.1: Product: USB Storage
[    3.051488] usb 6-2.1: Manufacturer: Generic
[    3.051489] usb 6-2.1: SerialNumber: 000000000813
[    3.052262] usb-storage 6-2.1:1.0: USB Mass Storage device detected
[    3.052512] scsi17 : usb-storage 6-2.1:1.0
[    3.122606] usb 7-1.4: new low-speed USB device number 3 using ehci-pci
[    3.218436] usb 7-1.4: New USB device found, idVendor=046a, idProduct=0011
[    3.218438] usb 7-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.222179] input: HID 046a:0011 as /devices/pci0000:00/0000:00:1a.0/usb7/7-1/7-1.4/7-1.4:1.0/0003:046A:0011.0002/input/input9
[    3.222315] hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 046a:0011] on usb-0000:00:1a.0-1.4/input0
[    3.294413] usb 8-1.7: new full-speed USB device number 3 using ehci-pci
[    3.386991] usb 8-1.7: New USB device found, idVendor=0cf3, idProduct=3000
[    3.386993] usb 8-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.393703] Bluetooth: Core ver 2.19
[    3.393711] NET: Registered protocol family 31
[    3.393712] Bluetooth: HCI device and connection manager initialized
[    3.393727] Bluetooth: HCI socket layer initialized
[    3.393729] Bluetooth: L2CAP socket layer initialized
[    3.393736] Bluetooth: SCO socket layer initialized
[    3.394324] usb 8-1.7: firmware: failed to load ath3k-1.fw (-2)
[    3.394345] usb 8-1.7: Direct firmware load failed with error -2
[    3.394346] usb 8-1.7: Falling back to user helper
[    3.394682] Bluetooth: Firmware file "ath3k-1.fw" request failed (err=-12)
[    3.394715] ath3k: probe of 8-1.7:1.0 failed with error -12
[    3.394726] usbcore: registered new interface driver ath3k
[    3.778760] scsi 16:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0813 PQ: 0 ANSI: 5
[    3.779077] sd 16:0:0:0: Attached scsi generic sg8 type 0
[    3.780556] sd 16:0:0:0: [sdg] Attached SCSI removable disk
[    3.929818] nouveau  [  PTHERM][0000:02:00.0] FAN control: PWM
[    3.929836] nouveau  [  PTHERM][0000:02:00.0] fan management: automatic
[    3.929851] nouveau  [  PTHERM][0000:02:00.0] internal sensor: yes
[    3.929878] nouveau  [     CLK][0000:02:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[    3.929880] nouveau  [     CLK][0000:02:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[    3.929882] nouveau  [     CLK][0000:02:00.0] 0f: core 550 MHz shader 1340 MHz memory 790 MHz
[    3.929907] nouveau  [     CLK][0000:02:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[    3.930122] [TTM] Zone  kernel: Available graphics memory: 6118414 kiB
[    3.930124] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.930124] [TTM] Initializing pool allocator
[    3.930128] [TTM] Initializing DMA pool allocator
[    3.930136] nouveau  [     DRM] VRAM: 1024 MiB
[    3.930137] nouveau  [     DRM] GART: 1048576 MiB
[    3.930139] nouveau  [     DRM] TMDS table version 2.0
[    3.930140] nouveau  [     DRM] DCB version 4.0
[    3.930142] nouveau  [     DRM] DCB outp 00: 01000302 00020030
[    3.930143] nouveau  [     DRM] DCB outp 01: 02000300 00000000
[    3.930144] nouveau  [     DRM] DCB outp 02: 01032310 00000000
[    3.930145] nouveau  [     DRM] DCB outp 03: 02021362 00020010
[    3.930146] nouveau  [     DRM] DCB conn 00: 00001030
[    3.930147] nouveau  [     DRM] DCB conn 01: 00002161
[    3.930148] nouveau  [     DRM] DCB conn 02: 00000200
[    3.940512] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.940513] [drm] Driver supports precise vblank timestamp query.
[    3.951781] nouveau  [     DRM] MM: using COPY for buffer copies
[    4.050568] scsi 17:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0813 PQ: 0 ANSI: 5
[    4.050779] sd 17:0:0:0: Attached scsi generic sg9 type 0
[    4.052671] sd 17:0:0:0: [sdh] Attached SCSI removable disk
[    4.056901] nouveau  [     DRM] allocated 1920x1080 fb: 0x70000, bo ffff88033fa2a800
[    4.056998] fbcon: nouveaufb (fb1) is primary device
[    4.056999] fbcon: Remapping primary device, fb1, to tty 1-63
[    4.237546] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.292382] nouveau 0000:02:00.0: fb1: nouveaufb frame buffer device
[    4.292385] [drm] Initialized nouveau 1.1.2 20120801 for 0000:02:00.0 on minor 1
[    4.292530] snd_hda_intel 0000:02:00.1: Disabling MSI
[    4.292536] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    4.470001] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
[    4.573284] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
[    4.573415] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    4.642378] RPC: Registered named UNIX socket transport module.
[    4.642382] RPC: Registered udp transport module.
[    4.642383] RPC: Registered tcp transport module.
[    4.642384] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.645093] FS-Cache: Loaded
[    4.650496] FS-Cache: Netfs 'nfs' registered for caching
[    4.656470] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    7.835952] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input10
[    7.836097] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input11
[    7.836215] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input12
[    7.836320] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input13
[   26.430581] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[   26.430588] e1000e 0000:00:19.0 eth1: 10/100 speed: disabling TSO
[   26.430625] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 3798.044523] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
[ 3798.064105] usb 2-1: New USB device found, idVendor=1058, idProduct=0820
[ 3798.064109] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 3798.064112] usb 2-1: Product: My Passport 0820
[ 3798.064114] usb 2-1: Manufacturer: Western Digital
[ 3798.064116] usb 2-1: SerialNumber: 57584A314541334C46464E39
[ 3798.065715] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3798.066025] scsi18 : usb-storage 2-1:1.0
[ 3799.064142] scsi 18:0:0:0: Direct-Access     WD       My Passport 0820 1007 PQ: 0 ANSI: 6
[ 3799.064385] scsi 18:0:0:1: Enclosure         WD       SES Device       1007 PQ: 0 ANSI: 6
[ 3799.065982] sd 18:0:0:0: Attached scsi generic sg10 type 0
[ 3799.066342] scsi 18:0:0:1: Attached scsi generic sg11 type 13
[ 3799.067909] sd 18:0:0:0: [sdi] Spinning up disk...
[ 3800.070400] .ready
[ 3804.603345] sd 18:0:0:0: [sdi] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3804.604304] sd 18:0:0:0: [sdi] Write Protect is off
[ 3804.604308] sd 18:0:0:0: [sdi] Mode Sense: 47 00 10 08
[ 3804.604925] sd 18:0:0:0: [sdi] No Caching mode page found
[ 3804.604929] sd 18:0:0:0: [sdi] Assuming drive cache: write through
[ 3804.615461]  sdi: sdi1
[ 3804.616290] ses 18:0:0:1: Attached Enclosure device
[ 3804.618044] sd 18:0:0:0: [sdi] Attached SCSI disk
[ 3851.587428] EXT4-fs (sdf1): warning: maximal mount count reached, running e2fsck is recommended
[ 3851.588327] EXT4-fs (sdf1): recovery complete
[ 3851.610716] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
[ 4307.657205] usb 2-1: USB disconnect, device number 4
 


Ce coup-ci c'est sûr il y a tout.


Edit à toto :
Mise en code simple le retour de la commande et suppression de : "bloc à supprimer si la commande n’affiche rien" pisque c'est marqué à supprimer, donc. tongue

Hors ligne

#41 28-01-2016 00:34:18

Severian
Membre
Distrib. : Debian GNU/Linux 8.6 (jessie)
Noyau : Linux 4.6.0-0.bpo.1-amd64
(G)UI : Openbox 3.6.1-2
Inscription : 13-12-2014

Re : [résolu]Freeze intempestifs

une question :
l'utilisation de

dmesg -l warn,err,crit


ne serait elle pas "plus simple" ?


"il est urgent d'attendre" (bendia)
ob3-debian2-150x50.png

En ligne

#42 28-01-2016 02:33:50

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : [résolu]Freeze intempestifs

greenmerlin a écrit :

Bonsoir,

Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.166641] [drm] Driver supports precise vblank timestamp query.
[    2.169350] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.169352] [drm] This can cause pipe underruns and display issues.
[    2.169353] [drm] Please upgrade your BIOS to fix this.


Met à jour ton Bios



Bonsoir
je pense plutot a un probleme de carte graphique (surement un peu ancienne )
ça n'empeche pas la mise a jour du bios de la carte mere  smile  , mais le probleme risque d etre toujours présent  wink

Dernière modification par robert2a (28-01-2016 02:34:28)

En ligne

#43 28-01-2016 10:21:02

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [résolu]Freeze intempestifs

Severian a écrit :

une question :
l'utilisation de

dmesg -l warn,err,crit


ne serait elle pas "plus simple" ?

Plus efficace à la lecture, oui.  cool


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#44 28-01-2016 12:29:49

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

robert2a a écrit :

greenmerlin a écrit :

Bonsoir,

Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.166641] [drm] Driver supports precise vblank timestamp query.
[    2.169350] [drm] Wrong MCH_SSKPD value: 0x16040307
[    2.169352] [drm] This can cause pipe underruns and display issues.
[    2.169353] [drm] Please upgrade your BIOS to fix this.


Met à jour ton Bios



Bonsoir
je pense plutot a un probleme de carte graphique (surement un peu ancienne )
ça n'empeche pas la mise a jour du bios de la carte mere  smile  , mais le probleme risque d etre toujours présent  wink


Bonjour,
il s'agit d'une GeForce GT 240 un modèle zotac passif : Zotac Fanless GeForce GT240 1GB DDR3 ZONE Edition
Me souviens pas si c'était vieux, 3-4 ans peut-être ...

Hors ligne

#45 28-01-2016 12:30:34

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

Severian a écrit :

une question :
l'utilisation de

dmesg -l warn,err,crit


ne serait elle pas "plus simple" ?


[    0.000000] ACPI: RSDP 0x00000000000F0420 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000AA7BE068 00004C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000AA7C7DD8 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000AA7BE140 009C95 (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000AADD9F80 000040
[    0.000000] ACPI: APIC 0x00000000AA7C7ED0 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000AA7C7F48 000102 (v01 AMICPU PROC     00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 0x00000000AA7C8050 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000AA7C8090 000038 (v01 ALASKA A M I    01072009 AMI. 00000004)
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x34fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xaa771fff]
[    0.000000]   node   0: [mem 0xaadcd000-0xaadcefff]
[    0.000000]   node   0: [mem 0xaae81000-0xaaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x34fdfffff]
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3078968
[    0.000000] Policy zone: Normal
[    0.000000] Memory: 12219908K/12487224K available (5219K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 267316K reserved)
[    0.003900] ACPI: All ACPI Tables successfully acquired
[    0.008270] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.503514]  #2 #3
[    0.551543] ACPI: Executed 1 blocks of module-level executable AML code
[    0.553210] ACPI: Dynamic OEM Table Load:
[    0.553214] ACPI: SSDT 0xFFFF880342B5E000 0003E0 (v01 AMI    IST      00000001 MSFT 03000001)
[    0.553476] ACPI: Dynamic OEM Table Load:
[    0.553479] ACPI: SSDT 0xFFFF880342B57A00 000120 (v01 AMI    CST      00000001 MSFT 03000001)
[    0.553973] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.641419] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.849177] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.727940] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[    1.728007] ata16.00: irq_stat 0x40000001
[    1.728071] Inquiry: 12 01 00 00 ff 00
[    1.728081] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
         res 50/00:03:00:14:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[    1.728153] ata16.00: status: { DRDY }
[    1.750418] sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[    1.824425] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.824490] ata9.00: irq_stat 0x40000001
[    1.840409] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    1.840484] ata9.00: irq_stat 0x40000001
[    2.329233] systemd[1]: [/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[    2.329247] systemd[1]: [/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[    2.336496] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    2.336507] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    2.336513] systemd[1]: Cannot add dependency job for unit NetworkManager-wait-online.service, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory.
[    2.441913] MXM: GUID detected in BIOS
[    2.474769] kvm: disabled by bios
[    2.487846] ata9.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
[    2.487851] ata9.00: irq_stat 0x40000001
[    2.509029] kvm: disabled by bios
[    2.558481] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.558486] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.558489] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.SBRG.GPBX) (20140424/utaddress-254)
[    2.558492] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.954531] usb 5-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.394324] usb 8-1.7: firmware: failed to load ath3k-1.fw (-2)
[    3.394345] usb 8-1.7: Direct firmware load failed with error -2
[    3.394346] usb 8-1.7: Falling back to user helper
[    3.394682] Bluetooth: Firmware file "ath3k-1.fw" request failed (err=-12)
[    3.394715] ath3k: probe of 8-1.7:1.0 failed with error -12
[ 3800.070400] .ready
[ 3804.604925] sd 18:0:0:0: [sdi] No Caching mode page found
[ 3804.604929] sd 18:0:0:0: [sdi] Assuming drive cache: write through
[ 3851.587428] EXT4-fs (sdf1): warning: maximal mount count reached, running e2fsck is recommended
 



Edit à Mamy Pareil que toto tongue

Mise en code simple le retour de la commande et suppression de : "bloc à supprimer si la commande n’affiche rien"


Quand tu postes un retour de commande, tu choisis le bouton "autre code" pour l'encadrer.
Le bouton Commande utilisateur ou commande root est réservé à la commande que tu tapes dans ton terminal et le deuxième bloc qui s'affiche à son retour wink
Milou

Hors ligne

#46 28-01-2016 13:21:06

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

oups désolé.
Ça vient de recommencer : je surfait sur le web avec iceweasel et je regardait un film avec mplayer et la freeze complet .... !
Donc, ça ne semble pas venir que de chromium+mplayer/vlc.
Je testais un truc, j'ai mis le film sur un dd portable pour voir, résultat : freeze.

Hors ligne

#47 28-01-2016 14:09:53

Severian
Membre
Distrib. : Debian GNU/Linux 8.6 (jessie)
Noyau : Linux 4.6.0-0.bpo.1-amd64
(G)UI : Openbox 3.6.1-2
Inscription : 13-12-2014

Re : [résolu]Freeze intempestifs

cat /var/log/syslog | grep -i "jan 28 12:"


cat /var/log/syslog.1 | grep -i "jan 28 12:"


"il est urgent d'attendre" (bendia)
ob3-debian2-150x50.png

En ligne

#48 28-01-2016 17:05:10

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : [résolu]Freeze intempestifs

Severian a écrit :

cat /var/log/syslog | grep -i "jan 28 12:"


cat /var/log/syslog.1 | grep -i "jan 28 12:"


big_smile (non justement c'est parfait )

Dernière modification par greenmerlin (28-01-2016 17:16:50)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#49 28-01-2016 17:13:48

Severian
Membre
Distrib. : Debian GNU/Linux 8.6 (jessie)
Noyau : Linux 4.6.0-0.bpo.1-amd64
(G)UI : Openbox 3.6.1-2
Inscription : 13-12-2014

Re : [résolu]Freeze intempestifs

bhâ quoi ???

ça ne permettra pas d'avoir les écritures journal au moment du freeze ??
(p'têtre que j'me trompe tongue)

"il est urgent d'attendre" (bendia)
ob3-debian2-150x50.png

En ligne

#50 28-01-2016 18:52:16

autrekrikri
Membre
Distrib. : Debian 8
Noyau : Linux 3.16.0-4-amd64
(G)UI : wmii
Inscription : 26-01-2016

Re : [résolu]Freeze intempestifs

Severian a écrit :

cat /var/log/syslog | grep -i "jan 28 12:"


cat /var/log/syslog.1 | grep -i "jan 28 12:"


alors, la première me renvoie :

Fichier binaire (entrée standard) correspondant
cat: erreur d'écriture: Relais brisé (pipe)
 


la seconde, euh ben rien ...

Hors ligne

Pied de page des forums