Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#26 27-01-2016 18:59:40

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : impossible de monter mes clés usb

greenmerlin a écrit :

Inutile de demandé ça le paquet dosfstools ne contient que les outils pour formater et créer des partitions fat...

Ah oui, désolé, c'est la paquet user-mode-linux.
Je me demande si il faut le réinstaller ...


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#27 27-01-2016 21:43:46

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

greenmerlin a écrit :

modinfo vfat


modprobe vfat




stp merci


salut a tous
desolé pour le retard, mais je n etait pas a la maison
voila
root@debian:/home/user#

modinfo vfat



filename:       /lib/modules/3.16.0-4-686-pae/kernel/fs/fat/vfat.ko
author:         Gordon Chaffee
description:    VFAT filesystem support
license:        GPL
alias:          fs-vfat
depends:        fat
intree:         Y
vermagic:       3.16.0-4-686-pae SMP mod_unload modversions 686
 


et pour modprobe vfat
root@debian:/home/user#

modprobe vfat



modprobe: ERROR: could not insert 'vfat': Unknown symbol in module, or unknown parameter (see dmesg)
 



Edit à toto :
Séparation des balises commande de leurs retour dans les balise code simple.

Hors ligne

#28 27-01-2016 21:53:47

phlinux
Membre
Lieu : S-M
Distrib. : Jessie
Noyau : 4.6
(G)UI : Openbox (+Rox+Feh)
Inscription : 10-05-2009

Re : impossible de monter mes clés usb

C'est une bonne habitude à prendre de vérifier par

dmesg


Pages perso : feh, omegat, udisks, sa station de travail comme passerelle

Hors ligne

#29 27-01-2016 21:59:43

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

user@debian:~$

dmesg



[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f79ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005f7a0000-0x000000005f7adfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000005f7ae000-0x000000005f7dffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005f7e0000-0x000000005f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer System Product Name/P5GC-MX, BIOS 0205    07/20/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x5f7a0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 05F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[    0.000000] BRK [0x01799000, 0x0179afff] PGTABLE
[    0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[    0.000000] BRK [0x0179c000, 0x0179cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x5d726000-0x5f79ffff]
[    0.000000] Allocated new RAMDISK: [mem 0x35584000-0x375fdc82]
[    0.000000] Move RAMDISK from [mem 0x5d726000-0x5f79fc82] to [mem 0x35584000-0x375fdc82]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000FB030 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x5F7A0000 00003C (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 07000720 MSFT 00000097)
[    0.000000] ACPI: FACP 0x5F7A0200 000084 (v02 A_M_I_ OEMFACP  07000720 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x5F7A05C0 00682B (v01 A0798  A0798000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x5F7AE000 000040
[    0.000000] ACPI: APIC 0x5F7A0390 00006C (v01 A_M_I_ OEMAPIC  07000720 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x5F7A0400 00003C (v01 A_M_I_ OEMMCFG  07000720 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x5F7A0440 000176 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff 07000720 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x5F7AE040 000080 (v01 A_M_I_ AMI_OEM  07000720 MSFT 00000097)
[    0.000000] ACPI: HPET 0x5F7A6DF0 000038 (v01 A_M_I_ OEMHPET  07000720 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 641MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x0179d000, 0x0179dfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x5f79ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x5f79ffff]
[    0.000000] On node 0 totalpages: 390974
[    0.000000] free_area_init_node: node 0, pgdat c1658ec0, node_mem_map f4994020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1284 pages used for memmap
[    0.000000]   HighMem zone: 164258 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Reserving Intel graphics stolen memory at 0x5f800000-0x5fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0x60000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f4953000 s34752 r0 d22592 u57344
[    0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 389202
[    0.000000] Kernel command line: BOOT_IMAGE=/live/vmlinuz2 boot=live components quiet splash initrd=/live/initrd2.img persistence
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0005f7a0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1509500K/1563896K available (4599K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 54396K reserved, 657032K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc166d000 - 0xc1711000   ( 656 kB)
      .data : 0xc147e240 - 0xc166b880   (1973 kB)
      .text : 0xc1000000 - 0xc147e240   (4600 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2799.978 MHz processor
[    0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.95 BogoMIPS (lpj=11199912)
[    0.004025] pid_max: default: 32768 minimum: 301
[    0.004041] ACPI: Core revision 20140424
[    0.015595] ACPI: All ACPI Tables successfully acquired
[    0.016051] Security Framework initialized
[    0.016066] AppArmor: AppArmor disabled by boot time parameter
[    0.016069] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.016098] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016103] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.016492] Initializing cgroup subsys memory
[    0.016502] Initializing cgroup subsys devices
[    0.016517] Initializing cgroup subsys freezer
[    0.016524] Initializing cgroup subsys net_cls
[    0.016534] Initializing cgroup subsys blkio
[    0.016542] Initializing cgroup subsys perf_event
[    0.016547] Initializing cgroup subsys net_prio
[    0.016590] CPU: Physical Processor ID: 0
[    0.016594] CPU: Processor Core ID: 0
[    0.016604] mce: CPU supports 4 MCE banks
[    0.016619] CPU0: Thermal monitoring enabled (TM1)
[    0.016624] process: using mwait in idle threads
[    0.016637] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.016837] Freeing SMP alternatives memory: 20K (c1711000 - c1716000)
[    0.021341] ftrace: allocating 20754 entries in 41 pages
[    0.032124] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032515] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073762] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (fam: 0f, model: 06, stepping: 05)
[    0.076000] APIC calibration not consistent with PM-Timer: 140ms instead of 100ms
[    0.076000] APIC delta adjusted to PM-Timer: 1249983 (1756054)
[    0.076000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.076000] ... version:                0
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      18
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             0000007fffffffff
[    0.076000] ... fixed-purpose events:   0
[    0.076000] ... event mask:             000000000003ffff
[    0.076000] CPU 1 irqstacks, hard=f454c000 soft=f454e000
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.085824] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.087888] x86: Booted up 1 node, 2 CPUs
[    0.087893] smpboot: Total of 2 processors activated (11199.91 BogoMIPS)
[    0.088172] devtmpfs: initialized
[    0.088451] PM: Registering ACPI NVS region [mem 0x5f7ae000-0x5f7dffff] (204800 bytes)
[    0.092232] pinctrl core: initialized pinctrl subsystem
[    0.092378] NET: Registered protocol family 16
[    0.092615] cpuidle: using governor ladder
[    0.092620] cpuidle: using governor menu
[    0.092725] ACPI: bus type PCI registered
[    0.092730] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.092894] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.092900] PCI: not using MMCONFIG
[    0.092949] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.093184] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[    0.093186] PCI: Using configuration type 1 for base access
[    0.104157] ACPI: Added _OSI(Module Device)
[    0.104157] ACPI: Added _OSI(Processor Device)
[    0.104157] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.104157] ACPI: Added _OSI(Processor Aggregator Device)
[    0.108436] ACPI: Executed 1 blocks of module-level executable AML code
[    0.112522] ACPI: Dynamic OEM Table Load:
[    0.112532] ACPI: SSDT 0xF45B3200 0001D2 (v01 AMI    CPU1PM   00000001 INTL 20051117)
[    0.113353] ACPI: Dynamic OEM Table Load:
[    0.113361] ACPI: SSDT 0xF45B3000 000143 (v01 AMI    CPU2PM   00000001 INTL 20051117)
[    0.114214] ACPI: Interpreter enabled
[    0.114248] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.114274] ACPI: (supports S0 S1 S3 S4 S5)
[    0.114277] ACPI: Using IOAPIC for interrupt routing
[    0.114318] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.116452] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[    0.116456] PCI: Using MMCONFIG for extended config space
[    0.116489] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.127331] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.127341] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.127351] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.127506] acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.127511] acpi PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.127516] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.127519] acpi PNP0A08:00: host bridge window [mem 0x5f810000-0xffffffff] (ignored)
[    0.127523] PCI: root bus 00: using default resources
[    0.127528] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.127802] PCI host bridge to bus 0000:00
[    0.127810] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.127814] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.127818] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.127833] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.128020] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[    0.128039] pci 0000:00:02.0: reg 0x10: [mem 0xcfc00000-0xcfc7ffff]
[    0.128048] pci 0000:00:02.0: reg 0x14: [io  0x8800-0x8807]
[    0.128058] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.128067] pci 0000:00:02.0: reg 0x1c: [mem 0xcfc80000-0xcfcbffff]
[    0.128273] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.128297] pci 0000:00:1b.0: reg 0x10: [mem 0xcfcf8000-0xcfcfbfff 64bit]
[    0.128391] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.128546] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.128644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.128723] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.128819] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.128916] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.128992] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.129094] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.129145] pci 0000:00:1d.0: reg 0x20: [io  0x9000-0x901f]
[    0.129234] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.129326] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.129377] pci 0000:00:1d.1: reg 0x20: [io  0x9400-0x941f]
[    0.129468] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.129559] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.129609] pci 0000:00:1d.2: reg 0x20: [io  0x9800-0x981f]
[    0.129697] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.129787] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.129837] pci 0000:00:1d.3: reg 0x20: [io  0xa000-0xa01f]
[    0.129925] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.130027] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.130053] pci 0000:00:1d.7: reg 0x10: [mem 0xcfcffc00-0xcfcfffff]
[    0.130152] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.130223] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.130317] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.130440] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.130538] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.130633] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI CPU throttle [io  0x0810-0x0815]
[    0.130641] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.130647] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[    0.130812] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.130830] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.130842] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.130854] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.130866] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.130878] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.130902] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.130906] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.130909] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.130912] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.131051] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.131071] pci 0000:00:1f.2: reg 0x10: [io  0xb800-0xb807]
[    0.131082] pci 0000:00:1f.2: reg 0x14: [io  0xb400-0xb403]
[    0.131093] pci 0000:00:1f.2: reg 0x18: [io  0xb000-0xb007]
[    0.131104] pci 0000:00:1f.2: reg 0x1c: [io  0xa800-0xa803]
[    0.131114] pci 0000:00:1f.2: reg 0x20: [io  0xa400-0xa40f]
[    0.131160] pci 0000:00:1f.2: PME# supported from D3hot
[    0.131310] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.131371] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.131611] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.131619] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.131740] pci 0000:02:00.0: [1969:2048] type 00 class 0x020000
[    0.131773] pci 0000:02:00.0: reg 0x10: [mem 0xcffc0000-0xcfffffff 64bit]
[    0.131835] pci 0000:02:00.0: reg 0x30: [mem 0xcffa0000-0xcffbffff pref]
[    0.131906] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.132017] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.132031] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.132037] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.132043] pci 0000:00:1c.1:   bridge window [mem 0xcff00000-0xcfffffff]
[    0.132130] pci 0000:01:00.0: [8086:1229] type 00 class 0x020000
[    0.132153] pci 0000:01:00.0: reg 0x10: [mem 0xeffff000-0xefffffff pref]
[    0.132166] pci 0000:01:00.0: reg 0x14: [io  0xc800-0xc81f]
[    0.132179] pci 0000:01:00.0: reg 0x18: [mem 0xcfe00000-0xcfefffff]
[    0.132219] pci 0000:01:00.0: reg 0x30: [mem 0xcfd00000-0xcfdfffff pref]
[    0.132254] pci 0000:01:00.0: supports D1 D2
[    0.132257] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[    0.132399] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[    0.132405] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.132411] pci 0000:00:1e.0:   bridge window [mem 0xcfd00000-0xcfefffff]
[    0.132419] pci 0000:00:1e.0:   bridge window [mem 0xeff00000-0xefffffff 64bit pref]
[    0.132423] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.132427] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.132450] pci_bus 0000:00: on NUMA node 0
[    0.134063] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.134185] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.134304] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.134423] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.134542] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.134660] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.134779] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.134899] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.135152] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.135152] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.135152] vgaarb: loaded
[    0.135152] vgaarb: bridge control possible 0000:00:02.0
[    0.135152] PCI: Using ACPI for IRQ routing
[    0.135152] PCI: pci_cache_line_size set to 64 bytes
[    0.135152] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.135152] e820: reserve RAM buffer [mem 0x5f7a0000-0x5fffffff]
[    0.135152] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.135152] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.135152] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.137045] Switched to clocksource hpet
[    0.147945] pnp: PnP ACPI init
[    0.147977] ACPI: bus type PNP registered
[    0.148120] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[    0.148128] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.148242] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.148755] pnp 00:02: [dma 2]
[    0.148854] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.149423] pnp 00:03: [dma 3]
[    0.149647] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.149777] system 00:04: [io  0x0290-0x0297] has been reserved
[    0.149783] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.150107] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.150112] system 00:05: [io  0x0800-0x087f] could not be reserved
[    0.150117] system 00:05: [io  0x0480-0x04bf] has been reserved
[    0.150121] system 00:05: [io  0x0900-0x091f] has been reserved
[    0.150126] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.150131] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.150137] system 00:05: [mem 0xffb00000-0xffbfffff] could not be reserved
[    0.150142] system 00:05: [mem 0xfff00000-0xffffffff] could not be reserved
[    0.150147] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.150431] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.150581] pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.150744] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.150749] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.150754] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.151154] pnp 00:09: [dma 0 disabled]
[    0.151284] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.151447] system 00:0a: [mem 0xffc00000-0xfff7ffff] has been reserved
[    0.151453] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.151584] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.151590] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.151935] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.151941] system 00:0c: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.151946] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.151950] system 00:0c: [mem 0x00100000-0x5f7fffff] could not be reserved
[    0.151955] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.152229] pnp: PnP ACPI: found 13 devices
[    0.152232] ACPI: bus type PNP unregistered
[    0.152241] PnPBIOS: Disabled by ACPI PNP
[    0.192357] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.192363] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[    0.192387] pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
[    0.192393] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.192397] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.192406] pci 0000:00:1c.0: BAR 14: assigned [mem 0x60000000-0x601fffff]
[    0.192415] pci 0000:00:1c.0: BAR 15: assigned [mem 0x100000000-0x1001fffff 64bit pref]
[    0.192420] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.192425] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.192433] pci 0000:00:1c.0:   bridge window [mem 0x60000000-0x601fffff]
[    0.192439] pci 0000:00:1c.0:   bridge window [mem 0x100000000-0x1001fffff 64bit pref]
[    0.192448] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.192452] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.192459] pci 0000:00:1c.1:   bridge window [mem 0xcff00000-0xcfffffff]
[    0.192470] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    0.192474] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.192481] pci 0000:00:1e.0:   bridge window [mem 0xcfd00000-0xcfefffff]
[    0.192487] pci 0000:00:1e.0:   bridge window [mem 0xeff00000-0xefffffff 64bit pref]
[    0.192496] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.192500] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.192504] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.192507] pci_bus 0000:03: resource 1 [mem 0x60000000-0x601fffff]
[    0.192511] pci_bus 0000:03: resource 2 [mem 0x100000000-0x1001fffff 64bit pref]
[    0.192515] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.192519] pci_bus 0000:02: resource 1 [mem 0xcff00000-0xcfffffff]
[    0.192523] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.192527] pci_bus 0000:01: resource 1 [mem 0xcfd00000-0xcfefffff]
[    0.192530] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xefffffff 64bit pref]
[    0.192534] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
[    0.192537] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[    0.192615] NET: Registered protocol family 2
[    0.192971] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.192999] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.193041] TCP: Hash tables configured (established 8192 bind 8192)
[    0.193088] TCP: reno registered
[    0.193093] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.193105] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.193201] NET: Registered protocol family 1
[    0.193230] pci 0000:00:02.0: Video device with shadowed ROM
[    0.194300] pci 0000:01:00.0: Firmware left e100 interrupts enabled; disabling
[    0.194309] PCI: CLS 16 bytes, default 64
[    0.194402] Unpacking initramfs...
[    1.185794] Freeing initrd memory: 33256K (f5584000 - f75fe000)
[    1.186119] microcode: CPU0 sig=0xf65, pf=0x4, revision=0x9
[    1.186134] microcode: CPU1 sig=0xf65, pf=0x4, revision=0x9
[    1.186256] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.186905] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.186969] audit: initializing netlink subsys (disabled)
[    1.186999] audit: type=2000 audit(1453922369.180:1): initialized
[    1.187499] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.187530] zbud: loaded
[    1.187749] VFS: Disk quotas dquot_6.5.2
[    1.187784] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.187886] msgmni has been set to 1729
[    1.188518] alg: No test for stdrng (krng)
[    1.188559] bounce: pool size: 64 pages
[    1.188585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.188682] io scheduler noop registered
[    1.188688] io scheduler deadline registered
[    1.188764] io scheduler cfq registered (default)
[    1.189086] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.189317] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.189481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.189522] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.189617] GHES: HEST is not enabled!
[    1.189654] isapnp: Scanning for PnP cards...
[    1.542891] isapnp: No Plug & Play device found
[    1.543011] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.563514] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.564236] Linux agpgart interface v0.103
[    1.564423] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[    1.564447] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.565359] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.565556] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.565873] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.568632] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.568647] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.568985] mousedev: PS/2 mouse device common for all mice
[    1.569092] rtc_cmos 00:01: RTC can wake from S4
[    1.569292] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.569324] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.569363] ledtrig-cpu: registered to indicate activity on CPUs
[    1.570260] TCP: cubic registered
[    1.570330] NET: Registered protocol family 10
[    1.570730] mip6: Mobile IPv6
[    1.570736] NET: Registered protocol family 17
[    1.570747] mpls_gso: MPLS GSO support
[    1.571084] Using IPI No-Shortcut mode
[    1.571363] registered taskstats version 1
[    1.571927] rtc_cmos 00:01: setting system clock to 2016-01-27 19:19:30 UTC (1453922370)
[    1.572053] PM: Hibernation image not present or could not be loaded.
[    1.572509] Freeing unused kernel memory: 656K (c166d000 - c1711000)
[    1.572576] Write protecting the kernel text: 4604k
[    1.572643] Write protecting the kernel read-only data: 1452k
[    1.572646] NX-protecting the kernel data: 3588k
[    1.590236] systemd-udevd[59]: starting version 215
[    1.590933] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.592727] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.608948] ACPI: bus type USB registered
[    1.609015] usbcore: registered new interface driver usbfs
[    1.609044] usbcore: registered new interface driver hub
[    1.617955] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.617966] ACPI: Power Button [PWRB]
[    1.618609] usbcore: registered new device driver usb
[    1.619332] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    1.619337] Copyright (c) 2007 Atheros Corporation.
[    1.619672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.620554] ehci-pci: EHCI PCI platform driver
[    1.620755] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.620769] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.620788] ehci-pci 0000:00:1d.7: debug port 1
[    1.622882] [drm] Initialized drm 1.1.0 20060810
[    1.623386] uhci_hcd: USB Universal Host Controller Interface driver
[    1.624708] ehci-pci 0000:00:1d.7: cache line size of 16 is not supported
[    1.627949] ehci-pci 0000:00:1d.7: irq 20, io mem 0xcfcffc00
[    1.628175] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.628183] ACPI: Power Button [PWRF]
[    1.636185] Floppy drive(s): fd0 is 1.44M
[    1.637674] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.638647] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.638652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.638657] usb usb1: Product: EHCI Host Controller
[    1.638661] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    1.638664] usb usb1: SerialNumber: 0000:00:1d.7
[    1.639620] hub 1-0:1.0: USB hub found
[    1.644430] hub 1-0:1.0: 8 ports detected
[    1.645504] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.645518] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.645528] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.645557] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[    1.645655] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.645659] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.645664] usb usb2: Product: UHCI Host Controller
[    1.645668] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.645671] usb usb2: SerialNumber: 0000:00:1d.0
[    1.645929] hub 2-0:1.0: USB hub found
[    1.645942] hub 2-0:1.0: 2 ports detected
[    1.646262] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.646273] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.646284] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.646325] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[    1.646404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.646408] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.646412] usb usb3: Product: UHCI Host Controller
[    1.646415] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.646418] usb usb3: SerialNumber: 0000:00:1d.1
[    1.646647] hub 3-0:1.0: USB hub found
[    1.646660] hub 3-0:1.0: 2 ports detected
[    1.646972] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.646985] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.646994] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.647030] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[    1.647107] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.647111] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.647115] usb usb4: Product: UHCI Host Controller
[    1.647118] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.647121] usb usb4: SerialNumber: 0000:00:1d.2
[    1.647346] hub 4-0:1.0: USB hub found
[    1.647358] hub 4-0:1.0: 2 ports detected
[    1.647671] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.647683] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.647693] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.647729] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[    1.647806] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.647811] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.647814] usb usb5: Product: UHCI Host Controller
[    1.647817] usb usb5: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[    1.647820] usb usb5: SerialNumber: 0000:00:1d.3
[    1.648059] hub 5-0:1.0: USB hub found
[    1.648071] hub 5-0:1.0: 2 ports detected
[    1.652000] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    1.652027] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.655823] FDC 0 is a post-1991 82077
[    1.681029] SCSI subsystem initialized
[    1.683328] e100 0000:01:00.0 eth1: addr 0xeffff000, irq 17, MAC addr 00:08:c7:f9:88:24
[    1.697156] [drm] Memory usable by graphics device = 256M
[    1.697162] [drm] Replacing VGA console driver
[    1.697803] Console: switching to colour dummy device 80x25
[    1.698214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.698217] [drm] Driver supports precise vblank timestamp query.
[    1.698840] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.703569] libata version 3.00 loaded.
[    1.717755] [drm] initialized overlay support
[    1.817594] fbcon: inteldrmfb (fb0) is primary device
[    1.833869] Console: switching to colour frame buffer device 170x48
[    1.839293] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.839297] i915 0000:00:02.0: registered panic notifier
[    1.860026] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.860336] ata_piix 0000:00:1f.1: version 2.13
[    1.862797] scsi0 : ata_piix
[    1.863030] scsi1 : ata_piix
[    1.863156] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.863160] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.863302] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.865341] scsi2 : ata_piix
[    1.865505] scsi3 : ata_piix
[    1.865620] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 23
[    1.865624] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 23
[    1.956039] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    2.088880] usb 1-2: New USB device found, idVendor=0781, idProduct=556b
[    2.088888] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.088893] usb 1-2: Product: Cruzer Edge
[    2.088897] usb 1-2: Manufacturer: SanDisk
[    2.088901] usb 1-2: SerialNumber: 20051740720F304275E8
[    2.091564] usb-storage 1-2:1.0: USB Mass Storage device detected
[    2.091817] scsi4 : usb-storage 1-2:1.0
[    2.092036] usbcore: registered new interface driver usb-storage
[    2.184020] tsc: Refined TSC clocksource calibration: 2799.966 MHz
[    2.200041] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    2.459750] usb 1-4: New USB device found, idVendor=046d, idProduct=0994
[    2.459756] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    2.459760] usb 1-4: SerialNumber: 8B34F711
[    3.089038] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Edge      1.26 PQ: 0 ANSI: 5
[    3.093641] sd 4:0:0:0: [sda] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    3.095132] sd 4:0:0:0: [sda] Write Protect is off
[    3.095138] sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00
[    3.096134] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.101659]  sda: sda1 sda2
[    3.104882] sd 4:0:0:0: [sda] Attached SCSI removable disk
[    3.105969] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    3.184091] Switched to clocksource tsc
[    3.993896] ISO 9660 Extensions: Microsoft Joliet Level 3
[    3.996896] ISO 9660 Extensions: RRIP_1991A
[    4.009529] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[    4.011609] aufs 3.16-20140908
[    4.028616] loop: module loaded
[    4.052633] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.074693] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   10.232421] random: nonblocking pool is initialized
[   12.308134] EXT4-fs (sda2): 12 orphan inodes deleted
[   12.308142] EXT4-fs (sda2): recovery complete
[   12.347014] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   14.277368] lp: driver loaded but no devices found
[   14.282722] ppdev: user-space parallel port driver
[   14.295098] parport_pc 00:03: reported by Plug and Play ACPI
[   14.295217] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   14.392274] lp0: using parport0 (interrupt-driven).
[   14.449055] fuse: Unknown symbol sysfs_create_mount_point (err 0)
[   14.449347] fuse: Unknown symbol sysfs_remove_mount_point (err 0)
[   14.481238] Guest personality initialized and is inactive
[   14.481351] VMCI host device registered (name=vmci, major=10, minor=59)
[   14.481356] Initialized host personality
[   15.193960] systemd-udevd[565]: starting version 215
[   15.410833] systemd-journald[492]: Received request to flush runtime journal from PID 1
[   15.958359] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.968482] intel_rng: FWH not detected
[   15.981890] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[   16.072991] leds_ss4200: no LED devices found
[   16.073880] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   16.104563] systemd-udevd[625]: renamed network interface eth0 to rename2
[   16.220414] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   16.239857] systemd-journald[492]: Received request to flush runtime journal from PID 1
[   16.240259] systemd-udevd[621]: renamed network interface eth1 to eth0
[   16.244744] fuse: Unknown symbol sysfs_create_mount_point (err 0)
[   16.245080] fuse: Unknown symbol sysfs_remove_mount_point (err 0)
[   16.272288] systemd-udevd[625]: renamed network interface eth0 to eth1
[   16.301510] iTCO_vendor_support: vendor-support=0
[   16.303585] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   16.303642] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   16.305702] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.351349] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   16.351357] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.351361] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   16.351365] sound hdaudioC0D0:    mono: mono_out=0x0
[   16.351368] sound hdaudioC0D0:    dig-out=0x1e/0x0
[   16.351371] sound hdaudioC0D0:    inputs:
[   16.351376] sound hdaudioC0D0:      Front Mic=0x19
[   16.351380] sound hdaudioC0D0:      Rear Mic=0x18
[   16.351384] sound hdaudioC0D0:      Line=0x1a
[   16.362279] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   16.362441] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   16.362599] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   16.362749] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   16.362896] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   16.467685] media: Linux media interface: v0.10
[   16.483605] Linux video capture interface: v2.00
[   16.535417] usb 1-4: Warning! Unlikely big volume range (=3584), cval->res is probably wrong.
[   16.535426] usb 1-4: [5] FU [Mic Capture Volume] ch = 1, val = 1280/4864/1
[   16.536414] usbcore: registered new interface driver snd-usb-audio
[   16.587961] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0994)
[   16.612219] input: UVC Camera (046d:0994) as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input11
[   16.612348] usbcore: registered new interface driver uvcvideo
[   16.612352] USB Video Class driver (1.1.1)
[   16.817370] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[   16.994668] RPC: Registered named UNIX socket transport module.
[   16.994675] RPC: Registered udp transport module.
[   16.994678] RPC: Registered tcp transport module.
[   16.994681] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.096094] FS-Cache: Loaded
[   17.124910] FS-Cache: Netfs 'nfs' registered for caching
[   17.192937] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   17.445677] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   20.503205] cfg80211: Calling CRDA to update world regulatory domain
[   20.656188] cfg80211: World regulatory domain updated:
[   20.656195] cfg80211:  DFS Master region: unset
[   20.656198] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.656203] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.656207] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.656211] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.656215] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   20.656219] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   20.656223] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   20.656226] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   20.656230] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   20.877632] atl2 0000:02:00.0: irq 43 for MSI/MSI-X
[   20.877745] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   20.909734] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.912288] e100 0000:01:00.0 eth0: NIC Link is Up 100 Mbps Full Duplex
[   20.916388] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.794353] fuse: Unknown symbol sysfs_create_mount_point (err 0)
[   27.794716] fuse: Unknown symbol sysfs_remove_mount_point (err 0)
[   28.256060] usb 1-4: reset high-speed USB device number 3 using ehci-pci
[ 1433.350000] fat: Unknown symbol __bread_gfp (err 0)
[ 1433.350060] fat: Unknown symbol __getblk_gfp (err 0)
[ 1482.960034] usb 1-5: new high-speed USB device number 4 using ehci-pci
[ 1483.104542] usb 1-5: New USB device found, idVendor=05e3, idProduct=0723
[ 1483.104550] usb 1-5: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 1483.104555] usb 1-5: Product: USB Storage
[ 1483.104559] usb 1-5: Manufacturer: Generic
[ 1483.104563] usb 1-5: SerialNumber: 000000009454
[ 1483.105490] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 1483.105713] scsi5 : usb-storage 1-5:1.0
[ 1484.105403] scsi 5:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9454 PQ: 0 ANSI: 0
[ 1484.107436] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1484.357745] sd 5:0:0:0: [sdb] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 1484.358984] sd 5:0:0:0: [sdb] Write Protect is off
[ 1484.358991] sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1484.360367] sd 5:0:0:0: [sdb] No Caching mode page found
[ 1484.360374] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 1484.367011]  sdb: sdb1
[ 1484.370992] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 1484.647855] fat: Unknown symbol __bread_gfp (err 0)
[ 1484.647908] fat: Unknown symbol __getblk_gfp (err 0)
[ 1491.437203] fat: Unknown symbol __bread_gfp (err 0)
[ 1491.437264] fat: Unknown symbol __getblk_gfp (err 0)
[ 1901.709560] fat: Unknown symbol __bread_gfp (err 0)
[ 1901.709620] fat: Unknown symbol __getblk_gfp (err 0)
[ 1905.574718] usb 1-5: USB disconnect, device number 4
[ 1906.952046] usb 1-5: new high-speed USB device number 5 using ehci-pci
[ 1907.096712] usb 1-5: New USB device found, idVendor=05e3, idProduct=0723
[ 1907.096719] usb 1-5: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 1907.096724] usb 1-5: Product: USB Storage
[ 1907.096728] usb 1-5: Manufacturer: Generic
[ 1907.096732] usb 1-5: SerialNumber: 000000009454
[ 1907.097567] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 1907.097749] scsi6 : usb-storage 1-5:1.0
[ 1908.097339] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9454 PQ: 0 ANSI: 0
[ 1908.098840] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1908.349805] sd 6:0:0:0: [sdb] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 1908.351041] sd 6:0:0:0: [sdb] Write Protect is off
[ 1908.351047] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1908.352448] sd 6:0:0:0: [sdb] No Caching mode page found
[ 1908.352457] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1908.358693]  sdb: sdb1
[ 1908.363053] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1908.663963] fat: Unknown symbol __bread_gfp (err 0)
[ 1908.664048] fat: Unknown symbol __getblk_gfp (err 0)
[ 1912.470142] fat: Unknown symbol __bread_gfp (err 0)
[ 1912.470202] fat: Unknown symbol __getblk_gfp (err 0)
[ 2021.055396] fat: Unknown symbol __bread_gfp (err 0)
[ 2021.055457] fat: Unknown symbol __getblk_gfp (err 0)
[ 2037.170996] fat: Unknown symbol __bread_gfp (err 0)
[ 2037.171057] fat: Unknown symbol __getblk_gfp (err 0)
user@debian:~$
 



Edit à toto :
Séparation des balises commandes user de leur retour balise simple code.

Hors ligne

#30 27-01-2016 22:12:43

phlinux
Membre
Lieu : S-M
Distrib. : Jessie
Noyau : 4.6
(G)UI : Openbox (+Rox+Feh)
Inscription : 10-05-2009

Re : impossible de monter mes clés usb

ça semble confirmer le bug avec ce kernel. T'es en 64 bits ?

Pages perso : feh, omegat, udisks, sa station de travail comme passerelle

Hors ligne

#31 27-01-2016 22:16:37

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : impossible de monter mes clés usb

Un bug ?
https://bugs.debian.org/cgi-bin/bugrepo … bug=808380

que te renvoie

uname -a

Dernière modification par greenmerlin (27-01-2016 22:18:42)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#32 27-01-2016 22:51:26

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

je suis en 32 bits
la j ai booter sur le noyau non pae pour tester

Linux debian 3.16.0-4-586 #1 Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) i686 GNU/Linux
 

Hors ligne

#33 27-01-2016 22:52:04

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

user@debian:~$

dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)"



ii  linux-headers-3.16.0-4-586            3.16.7-ckt20-1+deb8u3                i386         Header files for Linux 3.16.0-4-586
ii  linux-headers-3.16.0-4-686-pae        3.16.7-ckt20-1+deb8u3                i386         Header files for Linux 3.16.0-4-686-pae
ii  linux-headers-3.16.0-4-common         3.16.7-ckt20-1+deb8u3                i386         Common header files for Linux 3.16.0-4
ii  linux-headers-686-pae                 3.16+63                              i386         Header files for Linux 686-pae configuration (meta-package)
ii  linux-image-3.16.0-4-586              3.16.7-ckt20-1+deb8u3                i386         Linux 3.16 for older PCs
ii  linux-image-3.16.0-4-686-pae          3.16.7-ckt20-1+deb8u3                i386         Linux 3.16 for modern PCs
ii  linux-image-586                       3.16+63                              i386         Linux for older PCs (meta-package)
ii  linux-image-686-pae                   3.16+63                              i386         Linux for modern PCs (meta-package)
ii  util-linux-locales                    2.25.2-6                             all          Locales files for util-linux
 



Edit à toto :
Séparation des balises pour la commande de celles du retour. Encore un petit effort malmsteen et tu seras au top sur le forum df. smile

Hors ligne

#34 27-01-2016 23:04:23

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : impossible de monter mes clés usb

Bonsoir,

réinstalle ton noyau par default et les modules

apt-get install --reinstall linux-image-3.16.0-4-686-pae


ensuite reboot <--- important pour les modules
et pour finir tu ressaye de monter ta clef par

mount -t vfat /dev/sdb1 /mnt



@+


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#35 27-01-2016 23:26:42

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

je vous colle ca car je pense que ca a une relation avec le probléme
NB: je suis en live usb avec persistence

Paramétrage de linux-image-3.16.0-4-686-pae (3.16.7-ckt20-1+deb8u3) ...
/etc/kernel/postinst.d/initramfs-tools:
I: update-initramfs is disabled (live system is running without media mounted on /lib/live/mount/medium).
 


je reboot et je revient

Hors ligne

#36 27-01-2016 23:30:23

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

me revoila
rien n a changé ,le probleme persiste

Hors ligne

#37 27-01-2016 23:31:48

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

greenmerlin a écrit :

Bonsoir,

réinstalle ton noyau par default et les modules

apt-get install --reinstall linux-image-3.16.0-4-686-pae


ensuite reboot <--- important pour les modules
et pour finir tu ressaye de monter ta clef par

mount -t vfat /dev/sdb1 /mnt



@+


mount -t vfat /dev/sdb1 /mnt


mount: type de système de fichiers « vfat » inconnu
 

Hors ligne

#38 28-01-2016 00:04:53

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : impossible de monter mes clés usb

Re,

vérifions le module vat

file /lib/modules/`uname -r`/kernel/fs/fat/vfat.ko


md5sum /lib/modules/`uname -r`/kernel/fs/fat/vfat.ko


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#39 28-01-2016 18:42:24

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

greenmerlin a écrit :

Re,

vérifions le module vat

file /lib/modules/`uname -r`/kernel/fs/fat/vfat.ko


md5sum /lib/modules/`uname -r`/kernel/fs/fat/vfat.ko


salut a tous
me voila de retour

file /lib/modules/`uname -r`/kernel/fs/fat/vfat.ko


/lib/modules/3.16.0-4-686-pae/kernel/fs/fat/vfat.ko: ELF 32-bit LSB relocatable, Intel 80386, version 1 (SYSV), BuildID[sha1]=459e6f2452a0318d75a392049b71c4d17e3cc13b, not stripped
 


md5sum /lib/modules/`uname -r`/kernel/fs/fat/vfat.ko


e1d452d8406db4402318f0ecf941e1c5  /lib/modules/3.16.0-4-686-pae/kernel/fs/fat/vfat.ko
 


NB: hier soir j ai démarré la machine sans charger la persistence et le montage de la clé usb se fait le plus normalement du monde

Dernière modification par malmsteen (28-01-2016 18:44:26)

Hors ligne

#40 28-01-2016 23:01:13

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : impossible de monter mes clés usb

C'est-y résolu mon gaw ?
Dans s' cas, fô l'mettr' dans l' titr' le résolu.

Voir le tuto : C'est résolu ! Bravo mais il faut l'indiquer dans l'titre. big_smile

"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

En ligne

#41 29-01-2016 10:38:41

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

smolski a écrit :

C'est-y résolu mon gaw ?
Dans s' cas, fô l'mettr' dans l' titr' le résolu.

Voir le tuto : C'est résolu ! Bravo mais il faut l'indiquer dans l'titre. big_smile


salut
non pas encore
j ai dis que c etait sans la persistence, si je pert la persistence je pert tout ce qui y a avec(logiciels, config.....etc)
le probleme avec la persistence est toujours la

Hors ligne

#42 29-01-2016 10:48:37

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : impossible de monter mes clés usb

Pour la résolution de la persistance, je suis pas qualifié mais pour le point choco df, on va dire que dans le Vortex df, c'est une prémonition et donc un acquis.

Quoi j'abuse ? big_smile

"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

En ligne

#43 29-01-2016 20:18:04

malmsteen
Membre
Distrib. : Linux debian 8.3
Noyau : Linux 3.16.0-4-686-pae
(G)UI : gnome shell
Inscription : 26-01-2016

Re : impossible de monter mes clés usb

merci a vous
mais je vient de formater la persistence et de refaire tout a zero
j ai une question: comment monter automatiquement la persistence sans avoir a le faire manuellement depuis le menu de démarrage du live usb

Hors ligne

Pied de page des forums