Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 24-08-2016 10:55:59

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

[Résolu] Reboot aléatoire voire quelques fois blocage

Bonjour,

sur ma machine j'ai des reboot aléatoires sans que je ne sache pourquoi
quelques fois la machine se rallume sans problème et d'autres fois, lorsqu'il tente, il s'éteint à nouveau jusqu'au moment où il y a blocage et où ça ne se rallume plus
Dans ce cas, je dois attendre 20 à 40 minutes pour que le PC soit à nouveau opérationnel

Y-a-t-il un moyen de savoir ce qu'il s'est passé par les logs p.e.

Je ne sais pas si cela viens du DD qui chauffe voir qu'il s'use démesurément (c'est un SDD Samsung de 240 Go), où du Micro processeur dont j'avais déjà nettoyé le ventillateur mais oublier de nettoyer la patte thermique restante avant d'en poser une nouvelle couche (peut-être pas suffisante)

Est-ce que quelqu'un aurait des suggestions  à me faire ?

Je compte démonter le PC, nettoyer la patte thermique, en remettre une plus grosse couche pour voire ce que ça donne
je compte aussi retirer la tube qu'il y a en face du micro processeur et y insérer un ventilateur pour refroidir le PC et à l'arrière un ventilateur pour évacuer l'air chaud
sauf que je ne sais pas quel diamètre il faut, je ne peux mesurer qu'entre visserie

Merci pour vos conseils

Dernière modification par Philanthrope (Hier 19:01:04)


La présent est un passé en évolution

Hors ligne

#2 24-08-2016 11:54:03

tux12
Membre
Lieu : ./
Distrib. : Squeeze
Noyau : Linux 2.6.32-5-686-bigmem
(G)UI : KDE
Inscription : 27-02-2008

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Bonjour,

La pâte thermique est là pour combler les espaces entre le processeur et le radiateur; il n'est donc pas utile, voire contre productif de tenter d'en augmenter l'épaisseur, il vaut largement mieux prendre le temps de supprimer entièrement l'ancienne pour avoir une bonne surface de contact (et le moins possible de pâte).
Je penche en tous cas pour un problème matériel, processeur qui chauffe, alim, carte mère....

edit: Le problème survient-il à froid ou uniquement lors d'un reboot (machine utilisée peu de temps auparavant) ?

Dernière modification par tux12 (24-08-2016 11:54:49)

Hors ligne

#3 24-08-2016 12:32:31

nIQnutn
Modérateur
Lieu : Lyon
Distrib. : Jessie
Noyau : Linux 3.16-amd64
(G)UI : XFCE
Inscription : 16-03-2012
Site Web

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

pour ton pb, s'il s'agit de pb matériel:
regarde la température du CPU
vérifie les données SMART de ton SSD
vérifier la RAM

concernant la pâte thermique, l'objectif est de compenser les irrégularités entre le processeur et le radiateur. il en faut donc très peu.

Hors ligne

#4 27-08-2016 00:44:07

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Comment fait-on pour vérifier les données SMART du SSD ?
ça fait quelques jours, que l'ordi ne reboot plus, c'est vrai que je l’éteins le midi, je ne sais pas si c'est dût à ça

Le reboot ne se fait jamais à froid mais au bout de 4 à 6 heures d'utilisations

La présent est un passé en évolution

Hors ligne

#5 27-08-2016 06:48:48

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : [Résolu] Reboot aléatoire voire quelques fois blocage


"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#6 27-08-2016 11:00:16

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Merci pour l'info rapide

voilà ce que j'ai

smartctl -i /dev/sda


smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 840 EVO 250GB
Serial Number:    S1DBNSBF374755V
LU WWN Device Id: 5 002538 8a030a113
Firmware Version: EXT0BB6Q
User Capacity:    250 059 350 016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Aug 27 10:48:47 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled



en comparant avec le tuto, j'ai ceci de différence

SMART support is: Enabled


au lieu de

SMART support is: Disabled



j'en conclus qu'il est activé et je fais la manipulation suivante

smartctl --all /dev/sda


smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     Samsung SSD 840 EVO 250GB
Serial Number:    S1DBNSBF374755V
LU WWN Device Id: 5 002538 8a030a113
Firmware Version: EXT0BB6Q
User Capacity:    250 059 350 016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Aug 27 10:56:10 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
          was never started.
          Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    ( 4800) seconds.
Offline data collection
capabilities:        (0x53) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          No Offline surface scan supported.
          Self-test supported.
          No Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    (  80) minutes.
SCT capabilities:          (0x003d) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       6966
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       1863
177 Wear_Leveling_Count     0x0013   098   098   000    Pre-fail  Always       -       23
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   067   052   000    Old_age   Always       -       33
195 ECC_Error_Rate          0x001a   200   200   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
235 POR_Recovery_Count      0x0012   099   099   000    Old_age   Always       -       174
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       15100812119

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



Reste à attendre que raleur passe dans le coin pour me dire ce qu'il en ait big_smile


La présent est un passé en évolution

Hors ligne

#7 27-08-2016 12:00:11

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Je n'ai pas d'expérience avec les SSD défectueux, mais je ne vois rien d'anormal dans ce rapport SMART.
J'ai eu un disque dur (pas SSD) qui se bloquait aléatoirement et ne répondait plus, et cela ne se voyait pas dans le rapport SMART. Mais cela ne faisait pas rebooter le PC (faut dire qu'il était en RAID, ça aide).

Comme on te l'a déjà suggéré, vérifie la RAM avec memtest86(+), surveille la température du processeur.
Cela peut aussi venir de la carte graphique, ou de la carte mère qui surchauffe. Vérifie les ventilateurs.

Tu peux aussi regarder dans les logs du noyau /var/log/kern.log* juste avant le démarrage qui suit un arrêt ou reboot intempestif, mais il y a des chances qu'un problème assez grave pour provoquer un reboot ne laisse pas au système la possibilité d'écrire dans les logs.

Hors ligne

#8 27-08-2016 12:43:06

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

OK,

J'ai déjà testé la ram et pas de soucis à ce niveau
Je pense qu'il s'agit de mon ventilateur (j'en ait un en façade ) qui ne me semble pas suffisant ainsi qu'une sorte de tube au niveau du microprocesseur, coté qui est d'ailleurs souvant obstrué (sauf maintenant) car mon ordinateur est du coté gauche, difficile de le changer de place pour le moment
J'ai encore la place pour 2 autres ventilateurs mais je ne sais pas quel diamètre prendre
je n'ai ni la marque du boitier de mon UC ni le modèle, c'est écrit nul part, même pas sur la facture de mon assembleur 
je peux donner la séparation entre les trous de visserie

La présent est un passé en évolution

Hors ligne

#9 27-08-2016 13:19:08

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Les dimensions courantes pour les ventilateurs de boîtier sont 8x8 cm et 12x12 cm. La distance entre deux trous de fixation adjacents (pas en diagonale) est légèrement inférieure.

Autre cause courante de plantage : carte graphique défectueuse.

Hors ligne

#10 27-08-2016 13:58:47

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

J'ai un ventilateur de 14x14 en façade mais effectivement sur le coté, le 12x12 me semble être la bonne dimension, reste l'arrière
concernant la carte graphique, y a-t-il moyen de la tester ?

La présent est un passé en évolution

Hors ligne

#11 27-08-2016 15:20:46

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

On peut la faire travailler avec une application 3D intensive. On peut aussi la remplacer et voir ce qui se passe. Si les reboots continuent, ça ne vient pas de là. Si les reboots cessent, ça ne veut pas forcément dire que la carte graphique est défectueuse (sauf si on l'a remplacée par une carte du même modèle) ; le problème peut venir d'un bug du pilote graphique, de l'alimentation, d'une incompatibilité avec la carte mère...

Mais si les reboots ont cessé spontanément, ce ne sera pas probant non plus.

Dernière modification par raleur (27-08-2016 15:22:07)

Hors ligne

#12 27-08-2016 15:58:10

èfpé
Membre
Distrib. : Debian
Noyau : Linux
Inscription : 10-07-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Bonjour,

Philanthrope a écrit :

Je pense qu'il s'agit de mon ventilateur [...] ainsi qu'une sorte de tube au niveau du microprocesseur, côté qui est d'ailleurs souvent obstrué (sauf maintenant) [...].

Le reboot ne se fait jamais à froid mais au bout de 4 à 6 heures d'utilisation.

Dans ce cas, je dois attendre 20 à 40 minutes pour que le PC soit à nouveau opérationnel.


Tout cela évoque un problème de surchauffe, effectivement. Ce qui est étonnant par contre, c'est l'absence de bips d'alarme... Les reboots ont-ils cessé après que tu as désobstrué la grille de ventilation correspondant à ce fameux 'tube' ? Quoi qu'il en soit, ce 'tube' étant là pour optimiser le refroidissement du processeur, je ne sais pas si l'enlever serait une très bonne idée...

Dernière modification par èfpé (27-08-2016 16:00:36)

Hors ligne

#13 27-08-2016 16:29:36

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

@èfpé
Si je retire ce tube ce n'est pas pour ne rien mettre à la place
de plus, étant donné que c'est le coté proche de mon bureau, ce tube non seulement empêche de prendre l'air qui circule dans l'UC mais en plus asphyxie le microprocesseur
il faut dire aussi que cet tours est mal conçus
dès que possible, je la changerai pour une autre comportant la possibilité de mettre 7 ventilateurs dont une au dessus avec anti-poussière
lorsque je vois le travail, je me dis que j’aurais dut me renseigner plus profondément avant la fin de l'ancien PC afin d'acquérir le matériel et monter mon PC moi même
depuis que je l'ai acheter j'ai dut
- Changer la carte graphique (il utilisait la puce intégré) et l'alimentation pour que cette dernière supporte la nouvelle carte
- Ajouter des RAM (je n'avais que 4Go et la doc d'Ubuntu indique que c'est le minimum, j'ai du acquérir deux barrette de 8 Go chacune)
- même chose pour le microprocesseur où il faut 4 Ghz, j'en ait un peu moins
- J'ai vraiment l’essentiel en matière de tours alors qu'il en existe de bien mieux
- J'ai 3 disques dans le PC alors que j'aurai put le réduire à deux si j'avais un DD de 2 Go ou plus le tout en UEFI (supporté par la carte)

J'essaie de faire les modifications petit à petit

Concernant le bip, il se fait entendre au moment où le PC essaie de redémarrer

Dernière modification par Philanthrope (27-08-2016 16:35:30)


La présent est un passé en évolution

Hors ligne

#14 27-08-2016 16:48:08

èfpé
Membre
Distrib. : Debian
Noyau : Linux
Inscription : 10-07-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Re-,

Ah c'est sûr que si tu obstrues (je cite) la grille de ventilation correspondant à ce fameux 'tube' le microprocesseur se trouve quasiment asphyxié... surtout si le radiateur est 'décoré' d'une confortable couche de poussière.

Concernant le bip, il se fait entendre au moment où le PC essaie de redémarrer.


Un bip court survient à l'issue du POST, c'est tout à fait normal avec un BIOS classique.

Dernière modification par èfpé (27-08-2016 18:38:10)

Hors ligne

#15 27-08-2016 18:01:19

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Il faut aussi être un peu bête pour mettre ce fameux tube à) mon avis car s'il n'existait pas, le microprocesseur serait à la température du reste de l'UC qu'il faut refroidir
- mettre un ventilateur à la place du tube et à l’arrière

de plus, l'UC n'a JAMAIS été complètement collé sur le bureau, il restait un ou deux centimètres
Un ventilateur à cet endroit et un à l'arrière aurait permit de mieux ventiler l'ensemble
Pas un ventilateur lumineux qui fait spectacle de Jean-Michel Jarre mais simplement un ventilateur qui débite une bonne quantité d'air
j'ai encore une connexion sur ma carte mère et j'envisage d'en mettre un directement sur l'alimentation
il existe des câbles spécifiques

Lorsque j'ai fait le nettoyage, il y avait un peu d’électricité statique sur mon bureau (il faut dire que j'ai une vitre et un appareil un peu défectueux sur mon bureau, sans doute que le PC en a prit un coup, je compte aussi essayer de décharger les éléments avec une prise de terre

Dernière modification par Philanthrope (27-08-2016 18:04:56)


La présent est un passé en évolution

Hors ligne

#16 27-08-2016 20:09:40

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Philanthrope a écrit :

Il faut aussi être un peu bête pour mettre ce fameux tube à) mon avis car s'il n'existait pas, le microprocesseur serait à la température du reste de l'UC qu'il faut refroidir


Justement, le tube permet de refroidir le processeur avec de l'air extérieur plus froid que l'air à l'intérieur du boîtier. C'est une configuration assez courante.
Seulement un ou deux centimètres d'espace devant une prise d'air, c'est limite.

Hors ligne

#17 28-08-2016 08:49:07

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Je viens de déplacer mon UC et je l'ai placé sur le bureau, là, il y a une large place des deux cotés du PC

En regardant de plus près l'air est récupéré non en façade mais en dessous
Là où il était, c'est à dire par terre, il ne devait pas y avoir beaucoup d'air qui rentrait

voilà ce que me donne les indications de température

sensors


acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +105.0°C)

nouveau-pci-0100
Adapter: PCI adapter
temp1:        +38.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +39.0°C  (high = +80.0°C, crit = +100.0°C) <---  Je suppose qu'il s'agit de la température du PC
Core 0:         +39.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:         +36.0°C  (high = +80.0°C, crit = +100.0°C)



ce qui me semble un peu élevé

hddtemp /dev/sda /dev/sdb /dev/sdc


/dev/sda: Samsung SSD 840 EVO 250G B              ^ ^@: 35°C
/dev/sdb: Hitachi HDS721032CLA362: 35°C
/dev/sdc: TOSHIBA DT01ACA100: 35°C



La température du SSD et des HDD semble monter de manière régulière, de 29°, ils sont passés à 35° avec une faible activité de l'ordinateur et le ventilateur qui fonctionne
Je pense que le ventilateur qui ne débite pas suffisamment d'air, l'info n'est inscrite ni sur le ventilo ni sur la facture.

J'ai réussi à trouver le boîtier de mon PC
Hedcen - B9360CA

Voilà celui que je pense acquérir à la place
ZALMAN - Z11 Plus

Dernière modification par Philanthrope (28-08-2016 09:01:47)


La présent est un passé en évolution

Hors ligne

#18 28-08-2016 11:06:35

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Ces températures sont tout-à-fait raisonnables.

Hors ligne

#19 28-08-2016 12:42:06

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Je vais utiliser mon ordinateur de manière "normal" maintenant et voir ce que ça donne
Je parle de "normal" car avant j'éteignais le PC le midi ainsi que les VM lorsque j'avais fini
je prenais soins de ne pas ouvrir trop de logiciel en même temps

La présent est un passé en évolution

Hors ligne

#20 30-08-2016 20:55:07

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Il semblerait que tout fonctionne à nouveau normalement depuis le déplacement de la tours
Problème Résolu

PS :
Lorsque j'ai voulu mettre mon ordinateur en veille, celui-ci a redémarré juste après la sortie du mode veille
20 Go de ram et 8Go de swap était problématique

j'ai voulu laisser 20,3 Go de swap j'ai donc fait
20.3 x 1024 = 20787,2 Mo
J'ai arrondi à 21000

En mode Live :
avec gparted j'ai soustrait 21000 à la totalité de l'espace de mon disque (il n'y a que l'OS et le swap)
J'ai réduit l'espace de mon OS d'autant

En mode normal :
J'ai désactivé le  swap (swapoff)

swapoff /dev/<partitoon du swap>


Avec gparted j'ai déplacé et agrandit le swap
J'ai réactivé le swap (swapon)

swapon /dev/<partitoon du swap>



Pour connaître l'emplacement du swap :

blkid

Dernière modification par Philanthrope (02-09-2016 15:20:47)


La présent est un passé en évolution

Hors ligne

#21 05-09-2016 18:06:40

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Je viens de ravoir le problème de reboot aléatoire bien que celui-ci est de plus en plus éloigné

voici ce que me donne le fichier tronqué à la date et heure à laquelle le problème est arrivé

cat /var/log/syslog


Sep  5 16:02:05 ####### rsyslogd: [origin software="rsyslogd" swVersion="8.16.0" x-pid="2909" x-info="http://www.rsyslog.com"] start
Sep  5 16:02:05 ####### rsyslogd-2222: command 'KLogPermitNonKernelFacility' is currently not permitted - did you already set it via a RainerScript command (v6+ config)? [v8.16.0 try http://www.rsyslog.com/e/2222 ]
Sep  5 16:02:05 ####### rsyslogd: rsyslogd's groupid changed to 108
Sep  5 16:02:05 ####### rsyslogd: rsyslogd's userid changed to 104
Sep  5 16:02:05 ####### rsyslogd-2039: Could not open output pipe '/dev/xconsole':: No such file or directory [v8.16.0 try http://www.rsyslog.com/e/2039 ]
Sep  5 16:02:05 ####### rsyslogd-2007: action 'action 10' suspended, next retry is Mon Sep  5 16:02:35 2016 [v8.16.0 try http://www.rsyslog.com/e/2007 ]
Sep  5 16:02:05 ####### systemd-modules-load[1056]: Inserted module 'lp'
Sep  5 16:02:05 ####### systemd-modules-load[1056]: Inserted module 'ppdev'
Sep  5 16:02:05 ####### systemd-modules-load[1056]: Inserted module 'parport_pc'
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/lib/modprobe.d/blacklist_linux_4.4.0-31-generic.conf: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### loadkeys[1050]: Chargement de /etc/console-setup/cached.kmap.gz
Sep  5 16:02:05 ####### systemd[1]: Started Set console keymap.
Sep  5 16:02:05 ####### systemd[1]: Starting Apply Kernel Variables...
Sep  5 16:02:05 ####### systemd[1]: Mounting FUSE Control File System...
Sep  5 16:02:05 ####### systemd[1]: Starting Create Static Device Nodes in /dev...
Sep  5 16:02:05 ####### systemd[1]: Mounted FUSE Control File System.
Sep  5 16:02:05 ####### systemd[1]: Started Apply Kernel Variables.
Sep  5 16:02:05 ####### systemd[1]: Started Create Static Device Nodes in /dev.
Sep  5 16:02:05 ####### systemd[1]: Starting udev Kernel Device Manager...
Sep  5 16:02:05 ####### systemd[1]: Started udev Kernel Device Manager.
Sep  5 16:02:05 ####### systemd[1]: Starting Remount Root and Kernel File Systems...
Sep  5 16:02:05 ####### systemd[1]: Started Remount Root and Kernel File Systems.
Sep  5 16:02:05 ####### systemd[1]: Starting Flush Journal to Persistent Storage...
Sep  5 16:02:05 ####### kernel: [    0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
Sep  5 16:02:05 ####### kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  5 16:02:05 ####### kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  5 16:02:05 ####### kernel: [    0.000000] Initializing cgroup subsys cpuacct
Sep  5 16:02:05 ####### kernel: [    0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-01) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16)
Sep  5 16:02:05 ####### kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=a2142377-4f6a-4ba3-a5ca-f87d60dd7a29 ro quiet splash vt.handoff=7
Sep  5 16:02:05 ####### kernel: [    0.000000] KERNEL supported cpus:
Sep  5 16:02:05 ####### kernel: [    0.000000]   Intel GenuineIntel
Sep  5 16:02:05 ####### kernel: [    0.000000]   AMD AuthenticAMD
Sep  5 16:02:05 ####### kernel: [    0.000000]   Centaur CentaurHauls
Sep  5 16:02:05 ####### kernel: [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Sep  5 16:02:05 ####### kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
Sep  5 16:02:05 ####### kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
Sep  5 16:02:05 ####### kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
Sep  5 16:02:05 ####### kernel: [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Sep  5 16:02:05 ####### kernel: [    0.000000] x86/fpu: Using 'eager' FPU context switches.
Sep  5 16:02:05 ####### kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c172bfff] usable
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000c172c000-0x00000000c1732fff] ACPI NVS
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000c1733000-0x00000000c2540fff] usable
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000c2541000-0x00000000c2b07fff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000c2b08000-0x00000000d4356fff] usable
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000d4357000-0x00000000d43e0fff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000d43e1000-0x00000000d43f5fff] ACPI data
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000d43f6000-0x00000000d4563fff] ACPI NVS
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000d4564000-0x00000000d4ffefff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000d4fff000-0x00000000d4ffffff] usable
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000051effffff] usable
Sep  5 16:02:05 ####### kernel: [    0.000000] NX (Execute Disable) protection: active
Sep  5 16:02:05 ####### kernel: [    0.000000] SMBIOS 2.7 present.
Sep  5 16:02:05 ####### kernel: [    0.000000] DMI:                  /DH87RL, BIOS RLH8710H.86A.0320.2013.0606.1802 06/06/2013
Sep  5 16:02:05 ####### kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Sep  5 16:02:05 ####### kernel: [    0.000000] e820: last_pfn = 0x51f000 max_arch_pfn = 0x400000000
Sep  5 16:02:05 ####### kernel: [    0.000000] MTRR default type: uncachable
Sep  5 16:02:05 ####### kernel: [    0.000000] MTRR fixed ranges enabled:
Sep  5 16:02:05 ####### kernel: [    0.000000]   00000-9FFFF write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   A0000-BFFFF uncachable
Sep  5 16:02:05 ####### kernel: [    0.000000]   C0000-CFFFF write-protect
Sep  5 16:02:05 ####### kernel: [    0.000000]   D0000-E7FFF uncachable
Sep  5 16:02:05 ####### kernel: [    0.000000]   E8000-FFFFF write-protect
Sep  5 16:02:05 ####### kernel: [    0.000000] MTRR variable ranges enabled:
Sep  5 16:02:05 ####### kernel: [    0.000000]   0 base 0000000000 mask 7C00000000 write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   1 base 0400000000 mask 7F00000000 write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   2 base 0500000000 mask 7FF0000000 write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   3 base 0510000000 mask 7FF8000000 write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   4 base 0518000000 mask 7FFC000000 write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   5 base 051C000000 mask 7FFE000000 write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   6 base 051E000000 mask 7FFF000000 write-back
Sep  5 16:02:05 ####### kernel: [    0.000000]   7 base 00E0000000 mask 7FE0000000 uncachable
Sep  5 16:02:05 ####### kernel: [    0.000000]   8 disabled
Sep  5 16:02:05 ####### kernel: [    0.000000]   9 disabled
Sep  5 16:02:05 ####### kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
Sep  5 16:02:05 ####### kernel: [    0.000000] original variable MTRRs
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 0, base: 0GB, range: 16GB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 1, base: 16GB, range: 4GB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 2, base: 20GB, range: 256MB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 3, base: 20736MB, range: 128MB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 4, base: 20864MB, range: 64MB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 5, base: 20928MB, range: 32MB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 6, base: 20960MB, range: 16MB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 7, base: 3584MB, range: 512MB, type UC
Sep  5 16:02:05 ####### kernel: [    0.000000] total RAM covered: 20464M
Sep  5 16:02:05 ####### kernel: [    0.000000] Found optimal setting for mtrr clean up
Sep  5 16:02:05 ####### kernel: [    0.000000]  gran_size: 64K  chunk_size: 32M   num_reg: 8    lose cover RAM: 0G
Sep  5 16:02:05 ####### kernel: [    0.000000] New variable MTRRs
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 2, base: 3GB, range: 512MB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 3, base: 4GB, range: 4GB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 4, base: 8GB, range: 8GB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 5, base: 16GB, range: 4GB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 6, base: 20GB, range: 512MB, type WB
Sep  5 16:02:05 ####### kernel: [    0.000000] reg 7, base: 20976MB, range: 16MB, type UC
Sep  5 16:02:05 ####### kernel: [    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
Sep  5 16:02:05 ####### kernel: [    0.000000] e820: last_pfn = 0xd5000 max_arch_pfn = 0x400000000
Sep  5 16:02:05 ####### kernel: [    0.000000] found SMP MP-table at [mem 0x000fd700-0x000fd70f] mapped at [ffff8800000fd700]
Sep  5 16:02:05 ####### kernel: [    0.000000] Scanning 1 areas for low memory corruption
Sep  5 16:02:05 ####### kernel: [    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
Sep  5 16:02:05 ####### kernel: [    0.000000] Using GB pages for direct mapping
Sep  5 16:02:05 ####### kernel: [    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
Sep  5 16:02:05 ####### kernel: [    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
Sep  5 16:02:05 ####### kernel: [    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
Sep  5 16:02:05 ####### kernel: [    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
Sep  5 16:02:05 ####### kernel: [    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
Sep  5 16:02:05 ####### kernel: [    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
Sep  5 16:02:05 ####### kernel: [    0.000000] RAMDISK: [mem 0x33ae2000-0x35d68fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: Early table checksum verification disabled
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 INTEL )
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: XSDT 0x00000000D43E5080 00007C (v01 INTEL  DH87RL   00000140 AMI  00010013)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: FACP 0x00000000D43F08F8 00010C (v05 INTEL  DH87RL   00000140 AMI  00010013)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: DSDT 0x00000000D43E5188 00B76D (v02 INTEL  DH87RL   00000140 INTL 20120711)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: FACS 0x00000000D4562080 000040
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: APIC 0x00000000D43F0A08 000072 (v03 INTEL  DH87RL   00000140 AMI  00010013)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: FPDT 0x00000000D43F0A80 000044 (v01 INTEL  DH87RL   00000140 AMI  00010013)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: SSDT 0x00000000D43F0AC8 000539 (v01 INTEL  DH87RL   00000140 INTL 20051117)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: SSDT 0x00000000D43F1008 000AD8 (v01 INTEL  DH87RL   00000140 INTL 20051117)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: SSDT 0x00000000D43F1AE0 0001C7 (v01 INTEL  DH87RL   00000140 INTL 20051117)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: MCFG 0x00000000D43F1CA8 00003C (v01 INTEL  DH87RL   00000140 MSFT 00000097)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: HPET 0x00000000D43F1CE8 000038 (v01 INTEL  DH87RL   00000140 AMI. 00000005)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: SSDT 0x00000000D43F1D20 00036D (v01 INTEL  DH87RL   00000140 INTL 20091112)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: SSDT 0x00000000D43F2090 002EDB (v01 INTEL  DH87RL   00000140 INTL 20091112)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: DMAR 0x00000000D43F4F70 000070 (v01 INTEL  DH87RL   00000140 INTL 00000001)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  5 16:02:05 ####### kernel: [    0.000000] No NUMA configuration found
Sep  5 16:02:05 ####### kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000051effffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] NODE_DATA(0) allocated [mem 0x51eff7000-0x51effbfff]
Sep  5 16:02:05 ####### kernel: [    0.000000] Zone ranges:
Sep  5 16:02:05 ####### kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   Normal   [mem 0x0000000100000000-0x000000051effffff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   Device   empty
Sep  5 16:02:05 ####### kernel: [    0.000000] Movable zone start for each node
Sep  5 16:02:05 ####### kernel: [    0.000000] Early memory node ranges
Sep  5 16:02:05 ####### kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c172bfff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   node   0: [mem 0x00000000c1733000-0x00000000c2540fff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   node   0: [mem 0x00000000c2b08000-0x00000000d4356fff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   node   0: [mem 0x00000000d4fff000-0x00000000d4ffffff]
Sep  5 16:02:05 ####### kernel: [    0.000000]   node   0: [mem 0x0000000100000000-0x000000051effffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000051effffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] On node 0 totalpages: 5188902
Sep  5 16:02:05 ####### kernel: [    0.000000]   DMA zone: 64 pages used for memmap
Sep  5 16:02:05 ####### kernel: [    0.000000]   DMA zone: 21 pages reserved
Sep  5 16:02:05 ####### kernel: [    0.000000]   DMA zone: 3996 pages, LIFO batch:0
Sep  5 16:02:05 ####### kernel: [    0.000000]   DMA32 zone: 13495 pages used for memmap
Sep  5 16:02:05 ####### kernel: [    0.000000]   DMA32 zone: 863626 pages, LIFO batch:31
Sep  5 16:02:05 ####### kernel: [    0.000000]   Normal zone: 67520 pages used for memmap
Sep  5 16:02:05 ####### kernel: [    0.000000]   Normal zone: 4321280 pages, LIFO batch:31
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x1808
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Sep  5 16:02:05 ####### kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: IRQ0 used by override.
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: IRQ9 used by override.
Sep  5 16:02:05 ####### kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Sep  5 16:02:05 ####### kernel: [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Sep  5 16:02:05 ####### kernel: [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xc172c000-0xc1732fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xc2541000-0xc2b07fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xd4357000-0xd43e0fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xd43e1000-0xd43f5fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xd43f6000-0xd4563fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xd4564000-0xd4ffefff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xd5000000-0xf7ffffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
Sep  5 16:02:05 ####### kernel: [    0.000000] e820: [mem 0xd5000000-0xf7ffffff] available for PCI devices
Sep  5 16:02:05 ####### kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Sep  5 16:02:05 ####### kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Sep  5 16:02:05 ####### kernel: [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
Sep  5 16:02:05 ####### kernel: [    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88051ec00000 s98008 r8192 d28968 u524288
Sep  5 16:02:05 ####### kernel: [    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
Sep  5 16:02:05 ####### kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3
Sep  5 16:02:05 ####### kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 5107802
Sep  5 16:02:05 ####### kernel: [    0.000000] Policy zone: Normal
Sep  5 16:02:05 ####### kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=a2142377-4f6a-4ba3-a5ca-f87d60dd7a29 ro quiet splash vt.handoff=7
Sep  5 16:02:05 ####### kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep  5 16:02:05 ####### kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Sep  5 16:02:05 ####### kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Sep  5 16:02:05 ####### kernel: [    0.000000] ------------[ cut here ]------------
Sep  5 16:02:05 ####### kernel: [    0.000000] WARNING: CPU: 0 PID: 0 at /build/linux-a2WvEb/linux-4.4.0/drivers/iommu/dmar.c:830 warn_invalid_dmar+0x79/0x90()
Sep  5 16:02:05 ####### kernel: [    0.000000] Your BIOS is broken; DMAR reported at address 0!
Sep  5 16:02:05 ####### kernel: [    0.000000] BIOS vendor: Intel Corp.; Ver: RLH8710H.86A.0320.2013.0606.1802; Product Version:        
Sep  5 16:02:05 ####### kernel: [    0.000000] Modules linked in:
Sep  5 16:02:05 ####### systemd[1]: Reached target Local File Systems (Pre).
Sep  5 16:02:05 ####### systemd[1]: Starting Rebuild Hardware Database...
Sep  5 16:02:05 ####### systemd[1]: Starting Load/Save Random Seed...
Sep  5 16:02:05 ####### systemd[1]: Started Load/Save Random Seed.
Sep  5 16:02:05 ####### systemd[1]: Started Flush Journal to Persistent Storage.
Sep  5 16:02:05 ####### kernel: [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.0-36-generic #55-Ubuntu
Sep  5 16:02:05 ####### kernel: [    0.000000] Hardware name:                  /DH87RL, BIOS RLH8710H.86A.0320.2013.0606.1802 06/06/2013
Sep  5 16:02:05 ####### kernel: [    0.000000]  0000000000000086 4f3344b7603a932e ffffffff81e03d40 ffffffff813f13b3
Sep  5 16:02:05 ####### kernel: [    0.000000]  ffffffff81e03d88 ffffffff81d32e10 ffffffff81e03d78 ffffffff810810f2
Sep  5 16:02:05 ####### kernel: [    0.000000]  0000000000000000 ffffffff81cec205 ffffffff821ff00c ffffffff81aba758
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/usr/share/dbus-1/services/org.gnome.Totem.service: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/usr/share/upstart/sessions/session-migration.conf: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### systemd[1]: Started Rebuild Hardware Database.
Sep  5 16:02:05 ####### systemd[1]: Starting udev Coldplug all Devices...
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/usr/bin/session-migration: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.000000] Call Trace:
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff813f13b3>] dump_stack+0x63/0x90
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff810810f2>] warn_slowpath_common+0x82/0xc0
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81081204>] warn_slowpath_fmt_taint+0x54/0x70
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f8f511>] ? early_ioremap+0x9/0xb
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f6f371>] ? __acpi_map_table+0x13/0x18
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/gnome-keyring-ssh.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/update-notifier-crash-_var_crash__opt_extras.ubuntu.com_my-weather-indicator_bin_my-weather-indicator.1000.crash.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/update-notifier-crash-_var_crash__usr_bin_menulibre.1000.crash.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/update-notifier-crash-_var_crash__usr_bin_mkvmerge.1000.crash.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/update-notifier-crash-_var_crash__usr_bin_thunar.1000.crash.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff8153b6f9>] warn_invalid_dmar+0x79/0x90
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff818250e9>] dmar_validate_one_drhd+0x99/0xc0
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff8153b872>] dmar_walk_remapping_entries+0x82/0x190
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81fabec9>] detect_intel_iommu+0x61/0xf2
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81825050>] ? xen_swiotlb_init+0x4a0/0x4a0
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f69c63>] pci_iommu_alloc+0x50/0x6c
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/upstart-event-bridge.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/ssh-agent.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/update-notifier-release.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/gpg-agent.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### systemd[1]: Started udev Coldplug all Devices.
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f78d38>] mem_init+0x17/0x9d
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f5ade9>] start_kernel+0x259/0x4a2
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f5a120>] ? early_idt_handler_array+0x120/0x120
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f5a339>] x86_64_start_reservations+0x2a/0x2c
Sep  5 16:02:05 ####### kernel: [    0.000000]  [<ffffffff81f5a485>] x86_64_start_kernel+0x14a/0x16d
Sep  5 16:02:05 ####### kernel: [    0.000000] ---[ end trace 558f7caa1d7b9685 ]---
Sep  5 16:02:05 ####### systemd[1]: Starting Show Plymouth Boot Screen...
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.config/menus/applications-merged/user-menulibre-dossiers.menu: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.config/menus/applications-merged/user-menulibre-configurations.menu: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.config/menus/applications-merged/user-menulibre-internet.menu: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-bin.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.000000] Memory: 20309208K/20755608K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 446400K reserved, 0K cma-reserved)
Sep  5 16:02:05 ####### kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Sep  5 16:02:05 ####### kernel: [    0.000000] Hierarchical RCU implementation.
Sep  5 16:02:05 ####### kernel: [    0.000000]  Build-time adjustment of leaf fanout to 64.
Sep  5 16:02:05 ####### kernel: [    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/usr/share/applications/totem.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-zedtv.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-debian-facile.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/usr/share/applications/org.gnome.Totem.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-hardinfo.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
Sep  5 16:02:05 ####### kernel: [    0.000000] NR_IRQS:16640 nr_irqs:456 16
Sep  5 16:02:05 ####### kernel: [    0.000000] vt handoff: transparent VT on vt#7
Sep  5 16:02:05 ####### kernel: [    0.000000] Console: colour dummy device 80x25
Sep  5 16:02:05 ####### kernel: [    0.000000] console [tty0] enabled
Sep  5 16:02:05 ####### kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-bxwp.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### systemd[1]: Started Show Plymouth Boot Screen.
Sep  5 16:02:05 ####### systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.cache/upstart/indicator-sound.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-bash-travail.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.000000] hpet clockevent registered
Sep  5 16:02:05 ####### kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Sep  5 16:02:05 ####### kernel: [    0.000000] tsc: Detected 2993.131 MHz processor
Sep  5 16:02:05 ####### kernel: [    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 5986.26 BogoMIPS (lpj=11972524)
Sep  5 16:02:05 ####### kernel: [    0.000025] pid_max: default: 32768 minimum: 301
Sep  5 16:02:05 ####### kernel: [    0.000030] ACPI: Core revision 20150930
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-dropram.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-linstit.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-rdc.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-mencoder2.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.008014] ACPI: 6 ACPI AML tables successfully acquired and loaded
Sep  5 16:02:05 ####### kernel: [    0.008030] Security Framework initialized
Sep  5 16:02:05 ####### kernel: [    0.008031] Yama: becoming mindful.
Sep  5 16:02:05 ####### kernel: [    0.008042] AppArmor: AppArmor initialized
Sep  5 16:02:05 ####### kernel: [    0.009527] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Sep  5 16:02:05 ####### kernel: [    0.014187] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-ubuntu.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-mencoder1.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-theboss.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-cielcompta.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/applications/menulibre-tempdd.desktop: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.016186] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Sep  5 16:02:05 ####### kernel: [    0.016212] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Sep  5 16:02:05 ####### kernel: [    0.016466] Initializing cgroup subsys io
Sep  5 16:02:05 ####### kernel: [    0.016469] Initializing cgroup subsys memory
Sep  5 16:02:05 ####### kernel: [    0.016474] Initializing cgroup subsys devices
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/gvfs-metadata/home-762da204.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/gvfs-metadata/root-11b19b54.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/Trash/info/debianfacile.desktop.trashinfo: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/Trash/info/nautilus.trashinfo: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/Trash/info/nautilus.2.trashinfo: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### kernel: [    0.016476] Initializing cgroup subsys freezer
Sep  5 16:02:05 ####### kernel: [    0.016477] Initializing cgroup subsys net_cls
Sep  5 16:02:05 ####### kernel: [    0.016479] Initializing cgroup subsys perf_event
Sep  5 16:02:05 ####### kernel: [    0.016480] Initializing cgroup subsys net_prio
Sep  5 16:02:05 ####### kernel: [    0.016482] Initializing cgroup subsys hugetlb
Sep  5 16:02:05 ####### kernel: [    0.016484] Initializing cgroup subsys pids
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/.local/share/gvfs-metadata/uuid-8f0b4695-13c0-4c2f-820b-cfdb9af9b3a8-24a14bf6.log: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### ureadahead[1039]: ureadahead:/home/bienvenue/phpinfo.php: Aucun fichier ou dossier de ce type
Sep  5 16:02:05 ####### mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-8"
Sep  5 16:02:05 ####### mtp-probe: bus: 3, device: 4 was not an MTP device
Sep  5 16:02:05 ####### mtp-probe: checking bus 3, device 5: "/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3"
Sep  5 16:02:05 ####### kernel: [    0.016502] CPU: Physical Processor ID: 0
Sep  5 16:02:05 ####### kernel: [    0.016503] CPU: Processor Core ID: 0
Sep  5 16:02:05 ####### kernel: [    0.016506] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Sep  5 16:02:05 ####### kernel: [    0.016507] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Sep  5 16:02:05 ####### kernel: [    0.017291] mce: CPU supports 7 MCE banks
Sep  5 16:02:05 ####### kernel: [    0.017301] CPU0: Thermal monitoring enabled (TM1)
Sep  5 16:02:05 ####### mtp-probe: bus: 3, device: 5 was not an MTP device
Sep  5 16:02:05 ####### systemd[1]: Created slice system-udev\x2dconfigure\x2dprinter.slice.
Sep  5 16:02:05 ####### systemd-udevd[1190]: Process '/lib/udev/hdparm' failed with exit code 5.
Sep  5 16:02:05 ####### systemd[1]: Started Braille Device Support.
Sep  5 16:02:05 ####### systemd[1]: Found device Samsung_SSD_840_EVO_250GB 5.
Sep  5 16:02:05 ####### kernel: [    0.017307] process: using mwait in idle threads
Sep  5 16:02:05 ####### kernel: [    0.017310] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Sep  5 16:02:05 ####### kernel: [    0.017310] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Sep  5 16:02:05 ####### kernel: [    0.017578] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
Sep  5 16:02:05 ####### kernel: [    0.019034] ftrace: allocating 31996 entries in 125 pages
Sep  5 16:02:05 ####### kernel: [    0.029304] smpboot: Max logical packages: 2
Sep  5 16:02:05 ####### systemd[1]: Activating swap /dev/disk/by-uuid/039aede3-a76e-4c57-8a20-e826eb6583af...
Sep  5 16:02:05 ####### systemd[1]: Activated swap /dev/disk/by-uuid/039aede3-a76e-4c57-8a20-e826eb6583af.
Sep  5 16:02:05 ####### systemd[1]: Reached target Swap.
Sep  5 16:02:05 ####### systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Sep  5 16:02:05 ####### systemd[1]: Starting Load/Save RF Kill Switch Status...
Sep  5 16:02:05 ####### systemd[1]: Reached target Sound Card.
Sep  5 16:02:05 ####### systemd[1]: Started Load/Save RF Kill Switch Status.
Sep  5 16:02:05 ####### systemd-udevd[1185]: Process '/sbin/crda' failed with exit code 249.
Sep  5 16:02:05 ####### systemd[1]: Found device Hitachi_HDS721032CLA362 Mes_Documents_01.
Sep  5 16:02:05 ####### systemd[1]: Starting File System Check on /dev/disk/by-uuid/b1c1a667-400b-4179-a37c-55409d4b6544...
Sep  5 16:02:05 ####### systemd[1]: Started File System Check Daemon to report status.
Sep  5 16:02:05 ####### systemd[1]: Found device Hitachi_HDS721032CLA362 Disque_sdb1.
Sep  5 16:02:05 ####### systemd[1]: Starting File System Check on /dev/disk/by-uuid/bee9a650-80d0-4c7a-b33d-9542b80b2b4c...
Sep  5 16:02:05 ####### systemd[1]: Found device TOSHIBA_DT01ACA100 Disque_sdc3.
Sep  5 16:02:05 ####### systemd[1]: Found device TOSHIBA_DT01ACA100 Disque_sdc2.
Sep  5 16:02:05 ####### systemd[1]: Starting File System Check on /dev/disk/by-uuid/50aa727f-5738-446c-9579-e2f43a025fab...
Sep  5 16:02:05 ####### systemd[1]: Starting File System Check on /dev/disk/by-uuid/7a903c34-4f05-4c17-9d10-d1fe635edbda...
Sep  5 16:02:05 ####### systemd[1]: Found device Hitachi_HDS721032CLA362 Mes_Documents_02.
Sep  5 16:02:05 ####### systemd[1]: Starting File System Check on /dev/disk/by-uuid/8f0b4695-13c0-4c2f-820b-cfdb9af9b3a8...
Sep  5 16:02:05 ####### systemd-fsck[2627]: Mes_Documents_01 : récupération du journal
Sep  5 16:02:05 ####### systemd[1]: Found device TOSHIBA_DT01ACA100 Disque_sdc1.
Sep  5 16:02:05 ####### systemd[1]: Starting File System Check on /dev/disk/by-uuid/dea63793-031f-4cb3-987d-d678c3096cf5...
Sep  5 16:02:05 ####### systemd-fsck[2653]: Disque_sdc3 : récupération du journal
Sep  5 16:02:05 ####### systemd[1]: Found device TOSHIBA_DT01ACA100 Disque_sdc4.
Sep  5 16:02:05 ####### systemd[1]: Starting File System Check on /dev/disk/by-uuid/2596465e-8b88-4e86-9b26-c2126b870648...
Sep  5 16:02:05 ####### systemd-fsck[2627]: Mes_Documents_01 : propre, 8945/6512640 fichiers, 12368253/26047488 blocs
Sep  5 16:02:05 ####### systemd[1]: Started File System Check on /dev/disk/by-uuid/b1c1a667-400b-4179-a37c-55409d4b6544.
Sep  5 16:02:05 ####### systemd[1]: Mounting /media/Disque_sdb2...
Sep  5 16:02:05 ####### systemd-fsck[2653]: Disque_sdc3 : propre, 426/15269888 fichiers, 27692232/61047552 blocs
Sep  5 16:02:05 ####### systemd[1]: Mounted /media/Disque_sdb2.
Sep  5 16:02:05 ####### systemd-fsck[2642]: Disque_sdb1 : récupération du journal
Sep  5 16:02:05 ####### systemd[1]: Started File System Check on /dev/disk/by-uuid/7a903c34-4f05-4c17-9d10-d1fe635edbda.
Sep  5 16:02:05 ####### systemd[1]: Mounting /media/Disque_sdc3...
Sep  5 16:02:05 ####### systemd-fsck[2651]: Disque_sdc2 : récupération du journal
Sep  5 16:02:05 ####### systemd-fsck[2642]: Disque_sdb1 : propre, 366/6512640 fichiers, 22246199/26047488 blocs
Sep  5 16:02:05 ####### systemd[1]: Started File System Check on /dev/disk/by-uuid/bee9a650-80d0-4c7a-b33d-9542b80b2b4c.
Sep  5 16:02:05 ####### systemd[1]: Mounting /media/Disque_sdb1...
Sep  5 16:02:05 ####### systemd[1]: Mounted /media/Disque_sdc3.
Sep  5 16:02:05 ####### systemd[1]: Mounted /media/Disque_sdb1.
Sep  5 16:02:05 ####### systemd-fsck[2668]: Disque_sdc4 : récupération du journal
Sep  5 16:02:05 ####### systemd-fsck[2658]: Mes_Documents_02 : récupération du journal
Sep  5 16:02:05 ####### systemd-fsck[2651]: Disque_sdc2 : propre, 351/15269888 fichiers, 37867643/61047552 blocs
Sep  5 16:02:05 ####### systemd[1]: Started File System Check on /dev/disk/by-uuid/50aa727f-5738-446c-9579-e2f43a025fab.
Sep  5 16:02:05 ####### systemd[1]: Mounting /media/Disque_sdc2...
Sep  5 16:02:05 ####### systemd-fsck[2668]: Disque_sdc4 : propre, 1552/15269888 fichiers, 48536110/61047552 blocs
Sep  5 16:02:05 ####### systemd-fsck[2658]: Mes_Documents_02 : propre, 182786/6512640 fichiers, 10567903/26047488 blocs
Sep  5 16:02:05 ####### systemd-fsck[2662]: Disque_sdc1 : récupération du journal
Sep  5 16:02:05 ####### systemd[1]: Started File System Check on /dev/disk/by-uuid/2596465e-8b88-4e86-9b26-c2126b870648.
Sep  5 16:02:05 ####### systemd[1]: Mounting /media/Disque_sdc4...
Sep  5 16:02:05 ####### systemd[1]: Started File System Check on /dev/disk/by-uuid/8f0b4695-13c0-4c2f-820b-cfdb9af9b3a8.
Sep  5 16:02:05 ####### systemd[1]: Mounting /media/Disque_sdb3...
Sep  5 16:02:05 ####### systemd[1]: Mounted /media/Disque_sdb3.
Sep  5 16:02:05 ####### systemd[1]: Mounted /media/Disque_sdc2.
Sep  5 16:02:05 ####### systemd-fsck[2662]: Disque_sdc1 : propre, 52834/15269888 fichiers, 46990281/61047803 blocs
Sep  5 16:02:05 ####### systemd[1]: Started File System Check on /dev/disk/by-uuid/dea63793-031f-4cb3-987d-d678c3096cf5.
Sep  5 16:02:05 ####### systemd[1]: Mounting /media/Disque_sdc1...
Sep  5 16:02:05 ####### systemd[1]: Mounted /media/Disque_sdc4.
Sep  5 16:02:05 ####### systemd[1]: Received SIGRTMIN+20 from PID 1368 (plymouthd).
Sep  5 16:02:05 ####### systemd[1]: Mounted /media/Disque_sdc1.
Sep  5 16:02:05 ####### systemd[1]: Reached target Local File Systems.
Sep  5 16:02:05 ####### systemd[1]: Starting LSB: AppArmor initialization...
Sep  5 16:02:05 ####### systemd[1]: Starting Enable support for additional executable binary formats...
Sep  5 16:02:05 ####### systemd[1]: Starting Create Volatile Files and Directories...
Sep  5 16:02:05 ####### systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
Sep  5 16:02:05 ####### systemd[1]: Starting Set console font and keymap...
Sep  5 16:02:05 ####### systemd-tmpfiles[2735]: [/usr/lib/tmpfiles.d/var.conf:14] Duplicate line for path "/var/log", ignoring.
Sep  5 16:02:05 ####### systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 2734 (update-binfmts)
Sep  5 16:02:05 ####### systemd[1]: Started Create Volatile Files and Directories.
Sep  5 16:02:05 ####### systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
Sep  5 16:02:05 ####### apparmor[2731]:  * Starting AppArmor profiles
Sep  5 16:02:05 ####### systemd[1]: Starting Network Time Synchronization...
Sep  5 16:02:05 ####### systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Sep  5 16:02:05 ####### systemd[1]: Mounting Arbitrary Executable File Formats File System...
Sep  5 16:02:05 ####### systemd[1]: Started Network Time Synchronization.
Sep  5 16:02:05 ####### systemd[1]: Reached target System Time Synchronized.
Sep  5 16:02:05 ####### systemd[1]: Mounted Arbitrary Executable File Formats File System.
Sep  5 16:02:05 ####### systemd[1]: Started Enable support for additional executable binary formats.
Sep  5 16:02:05 ####### systemd[1]: Started Update UTMP about System Boot/Shutdown.
Sep  5 16:02:05 ####### apparmor[2731]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
Sep  5 16:02:05 ####### apparmor[2731]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
Sep  5 16:02:05 ####### apparmor[2731]: Erreur de l'analyseur AppArmor pour /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/usr.sbin.mysqld ? la ligne 9 : Impossible d'ouvrir << abstractions/mysql >>
Sep  5 16:02:05 ####### systemd[1]: Started Set console font and keymap.
Sep  5 16:02:05 ####### systemd[1]: Created slice system-getty.slice.
Sep  5 16:02:05 ####### apparmor[2731]: Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
Sep  5 16:02:05 ####### apparmor[2731]: Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
Sep  5 16:02:05 ####### apparmor[2731]: Erreur de l'analyseur AppArmor pour /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/usr.sbin.mysqld ? la ligne 9 : Impossible d'ouvrir << abstractions/mysql >>
Sep  5 16:02:05 ####### apparmor[2731]:    ...fail!
Sep  5 16:02:05 ####### systemd[1]: apparmor.service: Control process exited, code=exited status=123
Sep  5 16:02:05 ####### systemd[1]: Failed to start LSB: AppArmor initialization.
Sep  5 16:02:05 ####### systemd[1]: apparmor.service: Unit entered failed state.
Sep  5 16:02:05 ####### systemd[1]: apparmor.service: Failed with result 'exit-code'.
Sep  5 16:02:05 ####### systemd[1]: Starting Raise network interfaces...
Sep  5 16:02:05 ####### systemd[1]: Reached target System Initialization.
Sep  5 16:02:05 ####### systemd[1]: Starting Socket activation for snappy daemon.
Sep  5 16:02:05 ####### systemd[1]: Started Trigger resolvconf update for networkd DNS.
Sep  5 16:02:05 ####### systemd[1]: Listening on UUID daemon activation socket.
Sep  5 16:02:05 ####### systemd[1]: Started CUPS Scheduler.
Sep  5 16:02:05 ####### systemd[1]: Listening on ACPID Listen Socket.
Sep  5 16:02:05 ####### systemd[1]: snapd.refresh.timer: Adding 5h 8min 28.164929s random time.
Sep  5 16:02:05 ####### systemd[1]: snapd.refresh.timer: Adding 41min 15.309817s random time.
Sep  5 16:02:05 ####### systemd[1]: Started Timer to automatically refresh installed snaps.
Sep  5 16:02:05 ####### systemd[1]: Started Daily Cleanup of Temporary Directories.
Sep  5 16:02:05 ####### systemd[1]: Listening on CUPS Scheduler.
Sep  5 16:02:05 ####### systemd[1]: Listening on D-Bus System Message Bus Socket.
Sep  5 16:02:05 ####### systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Sep  5 16:02:05 ####### systemd[1]: apt-daily.timer: Adding 1h 51min 17.556048s random time.
Sep  5 16:02:05 ####### systemd[1]: Started Daily apt activities.
Sep  5 16:02:05 ####### systemd[1]: Reached target Timers.
Sep  5 16:02:05 ####### systemd[1]: Started ACPI Events Check.
Sep  5 16:02:05 ####### systemd[1]: Reached target Paths.
Sep  5 16:02:05 ####### systemd[1]: Listening on Socket activation for snappy daemon.
Sep  5 16:02:05 ####### systemd[1]: Reached target Sockets.
Sep  5 16:02:05 ####### systemd[1]: Reached target Basic System.
Sep  5 16:02:05 ####### systemd[1]: Starting System Logging Service...
Sep  5 16:02:05 ####### systemd[1]: Starting LSB: Starts and stops Wicd...
Sep  5 16:02:05 ####### systemd[1]: Started Self Monitoring and Reporting Technology (SMART) Daemon.
Sep  5 16:02:05 ####### systemd[1]: Starting LSB: Record successful boot for GRUB...
Sep  5 16:02:05 ####### systemd[1]: Started ACPI event daemon.
Sep  5 16:02:05 ####### systemd[1]: Starting LSB: automatic crash report generation...
Sep  5 16:02:05 ####### systemd[1]: Started Run anacron jobs.
Sep  5 16:02:05 ####### kernel: [    0.029306] smpboot: APIC(0) Converting physical 0 to logical package 0
Sep  5 16:02:05 ####### kernel: [    0.029310] DMAR: Host address width 39
Sep  5 16:02:05 ####### kernel: [    0.029311] DMAR: DRHD base: 0x00000000000000 flags: 0x1
Sep  5 16:02:05 ####### kernel: [    0.029312] DMAR: Parse DMAR table failure.
Sep  5 16:02:05 ####### kernel: [    0.029702] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep  5 16:02:05 ####### kernel: [    0.069392] TSC deadline timer enabled
Sep  5 16:02:05 ####### kernel: [    0.069395] smpboot: CPU0: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Sep  5 16:02:05 ####### kernel: [    0.069409] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
Sep  5 16:02:05 ####### kernel: [    0.069425] ... version:                3
Sep  5 16:02:05 ####### kernel: [    0.069425] ... bit width:              48
Sep  5 16:02:05 ####### kernel: [    0.069426] ... generic registers:      4
Sep  5 16:02:05 ####### kernel: [    0.069427] ... value mask:             0000ffffffffffff
Sep  5 16:02:05 ####### kernel: [    0.069427] ... max period:             0000ffffffffffff
Sep  5 16:02:05 ####### kernel: [    0.069428] ... fixed-purpose events:   3
Sep  5 16:02:05 ####### kernel: [    0.069429] ... event mask:             000000070000000f
Sep  5 16:02:05 ####### kernel: [    0.070061] x86: Booting SMP configuration:
Sep  5 16:02:05 ####### kernel: [    0.070062] .... node  #0, CPUs:      #1
Sep  5 16:02:05 ####### kernel: [    0.071305] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
Sep  5 16:02:05 ####### kernel: [    0.074224] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Sep  5 16:02:05 ####### kernel: [    0.074283]  #2 #3
Sep  5 16:02:05 ####### kernel: [    0.080526] x86: Booted up 1 node, 4 CPUs
Sep  5 16:02:05 ####### kernel: [    0.080529] smpboot: Total of 4 processors activated (23945.04 BogoMIPS)
Sep  5 16:02:05 ####### kernel: [    0.083471] devtmpfs: initialized
Sep  5 16:02:05 ####### kernel: [    0.085993] evm: security.selinux
Sep  5 16:02:05 ####### kernel: [    0.085994] evm: security.SMACK64
Sep  5 16:02:05 ####### kernel: [    0.085995] evm: security.SMACK64EXEC
Sep  5 16:02:05 ####### kernel: [    0.085995] evm: security.SMACK64TRANSMUTE
Sep  5 16:02:05 ####### kernel: [    0.085996] evm: security.SMACK64MMAP
Sep  5 16:02:05 ####### kernel: [    0.085997] evm: security.ima
Sep  5 16:02:05 ####### kernel: [    0.085997] evm: security.capability
Sep  5 16:02:05 ####### kernel: [    0.086043] PM: Registering ACPI NVS region [mem 0xc172c000-0xc1732fff] (28672 bytes)
Sep  5 16:02:05 ####### kernel: [    0.086044] PM: Registering ACPI NVS region [mem 0xd43f6000-0xd4563fff] (1499136 bytes)
Sep  5 16:02:05 ####### kernel: [    0.086121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Sep  5 16:02:05 ####### kernel: [    0.086187] pinctrl core: initialized pinctrl subsystem
Sep  5 16:02:05 ####### kernel: [    0.086277] RTC time: 14:01:59, date: 09/05/16
Sep  5 16:02:05 ####### kernel: [    0.086360] NET: Registered protocol family 16
Sep  5 16:02:05 ####### kernel: [    0.095376] cpuidle: using governor ladder
Sep  5 16:02:05 ####### kernel: [    0.107367] cpuidle: using governor menu
Sep  5 16:02:05 ####### kernel: [    0.107370] PCCT header not found.
Sep  5 16:02:05 ####### kernel: [    0.107427] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Sep  5 16:02:05 ####### kernel: [    0.107428] ACPI: bus type PCI registered
Sep  5 16:02:05 ####### kernel: [    0.107429] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Sep  5 16:02:05 ####### kernel: [    0.107487] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Sep  5 16:02:05 ####### kernel: [    0.107489] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
Sep  5 16:02:05 ####### kernel: [    0.107496] PCI: Using configuration type 1 for base access
Sep  5 16:02:05 ####### kernel: [    0.107521] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
Sep  5 16:02:05 ####### kernel: [    0.115606] ACPI: Added _OSI(Module Device)
Sep  5 16:02:05 ####### kernel: [    0.115607] ACPI: Added _OSI(Processor Device)
Sep  5 16:02:05 ####### kernel: [    0.115608] ACPI: Added _OSI(3.0 _SCP Extensions)
Sep  5 16:02:05 ####### kernel: [    0.115609] ACPI: Added _OSI(Processor Aggregator Device)
Sep  5 16:02:05 ####### kernel: [    0.118217] ACPI: Executed 1 blocks of module-level executable AML code
Sep  5 16:02:05 ####### kernel: [    0.120038] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Sep  5 16:02:05 ####### kernel: [    0.120346] ACPI: Dynamic OEM Table Load:
Sep  5 16:02:05 ####### kernel: [    0.120350] ACPI: SSDT 0xFFFF880506E3B800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
Sep  5 16:02:05 ####### kernel: [    0.120814] ACPI: Dynamic OEM Table Load:
Sep  5 16:02:05 ####### kernel: [    0.120818] ACPI: SSDT 0xFFFF880507391800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
Sep  5 16:02:05 ####### kernel: [    0.121289] ACPI: Dynamic OEM Table Load:
Sep  5 16:02:05 ####### kernel: [    0.121291] ACPI: SSDT 0xFFFF880506E5AE00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
Sep  5 16:02:05 ####### kernel: [    0.121971] ACPI: Interpreter enabled
Sep  5 16:02:05 ####### kernel: [    0.121977] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
Sep  5 16:02:05 ####### kernel: [    0.121981] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
Sep  5 16:02:05 ####### kernel: [    0.121993] ACPI: (supports S0 S3 S4 S5)
Sep  5 16:02:05 ####### kernel: [    0.121994] ACPI: Using IOAPIC for interrupt routing
Sep  5 16:02:05 ####### kernel: [    0.122012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Sep  5 16:02:05 ####### kernel: [    0.127995] ACPI: Power Resource [FN00] (off)
Sep  5 16:02:05 ####### kernel: [    0.128049] ACPI: Power Resource [FN01] (off)
Sep  5 16:02:05 ####### kernel: [    0.128101] ACPI: Power Resource [FN02] (off)
Sep  5 16:02:05 ####### kernel: [    0.128152] ACPI: Power Resource [FN03] (off)
Sep  5 16:02:05 ####### kernel: [    0.128203] ACPI: Power Resource [FN04] (off)
Sep  5 16:02:05 ####### kernel: [    0.128735] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Sep  5 16:02:05 ####### kernel: [    0.128739] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Sep  5 16:02:05 ####### kernel: [    0.128895] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
Sep  5 16:02:05 ####### kernel: [    0.128980] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
Sep  5 16:02:05 ####### kernel: [    0.128981] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Sep  5 16:02:05 ####### kernel: [    0.129498] PCI host bridge to bus 0000:00
Sep  5 16:02:05 ####### kernel: [    0.129500] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Sep  5 16:02:05 ####### kernel: [    0.129502] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
Sep  5 16:02:05 ####### kernel: [    0.129503] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Sep  5 16:02:05 ####### kernel: [    0.129504] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
Sep  5 16:02:05 ####### kernel: [    0.129505] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
Sep  5 16:02:05 ####### kernel: [    0.129506] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
Sep  5 16:02:05 ####### kernel: [    0.129507] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
Sep  5 16:02:05 ####### kernel: [    0.129508] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
Sep  5 16:02:05 ####### kernel: [    0.129509] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
Sep  5 16:02:05 ####### kernel: [    0.129510] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
Sep  5 16:02:05 ####### kernel: [    0.129511] pci_bus 0000:00: root bus resource [bus 00-3e]
Sep  5 16:02:05 ####### kernel: [    0.129517] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
Sep  5 16:02:05 ####### kernel: [    0.129586] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
Sep  5 16:02:05 ####### kernel: [    0.129613] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.129672] pci 0000:00:01.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.129720] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
Sep  5 16:02:05 ####### kernel: [    0.129744] pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
Sep  5 16:02:05 ####### kernel: [    0.129788] pci 0000:00:14.0: PME# supported from D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.129815] pci 0000:00:14.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.129845] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
Sep  5 16:02:05 ####### kernel: [    0.129868] pci 0000:00:16.0: reg 0x10: [mem 0xf723b000-0xf723b00f 64bit]
Sep  5 16:02:05 ####### kernel: [    0.129915] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.129975] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
Sep  5 16:02:05 ####### kernel: [    0.129997] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
Sep  5 16:02:05 ####### kernel: [    0.130004] pci 0000:00:19.0: reg 0x14: [mem 0xf7239000-0xf7239fff]
Sep  5 16:02:05 ####### kernel: [    0.130011] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
Sep  5 16:02:05 ####### kernel: [    0.130053] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.130079] pci 0000:00:19.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.130113] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
Sep  5 16:02:05 ####### kernel: [    0.130137] pci 0000:00:1a.0: reg 0x10: [mem 0xf7238000-0xf72383ff]
Sep  5 16:02:05 ####### kernel: [    0.130200] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.130240] pci 0000:00:1a.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.130274] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
Sep  5 16:02:05 ####### kernel: [    0.130296] pci 0000:00:1b.0: reg 0x10: [mem 0xf7230000-0xf7233fff 64bit]
Sep  5 16:02:05 ####### kernel: [    0.130346] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.130375] pci 0000:00:1b.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.130407] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
Sep  5 16:02:05 ####### kernel: [    0.130460] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.130510] pci 0000:00:1c.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.130545] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
Sep  5 16:02:05 ####### kernel: [    0.130600] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.130649] pci 0000:00:1c.7: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.130682] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
Sep  5 16:02:05 ####### kernel: [    0.130707] pci 0000:00:1d.0: reg 0x10: [mem 0xf7237000-0xf72373ff]
Sep  5 16:02:05 ####### kernel: [    0.130770] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Sep  5 16:02:05 ####### kernel: [    0.130811] pci 0000:00:1d.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.130845] pci 0000:00:1f.0: [8086:8c4a] type 00 class 0x060100
Sep  5 16:02:05 ####### kernel: [    0.130986] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
Sep  5 16:02:05 ####### kernel: [    0.131004] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
Sep  5 16:02:05 ####### kernel: [    0.131011] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
Sep  5 16:02:05 ####### kernel: [    0.131017] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
Sep  5 16:02:05 ####### kernel: [    0.131024] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
Sep  5 16:02:05 ####### kernel: [    0.131030] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
Sep  5 16:02:05 ####### kernel: [    0.131037] pci 0000:00:1f.2: reg 0x24: [mem 0xf7236000-0xf72367ff]
Sep  5 16:02:05 ####### kernel: [    0.131060] pci 0000:00:1f.2: PME# supported from D3hot
Sep  5 16:02:05 ####### kernel: [    0.131112] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
Sep  5 16:02:05 ####### kernel: [    0.131126] pci 0000:00:1f.3: reg 0x10: [mem 0xf7235000-0xf72350ff 64bit]
Sep  5 16:02:05 ####### kernel: [    0.131143] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
Sep  5 16:02:05 ####### kernel: [    0.131235] pci 0000:01:00.0: [10de:1381] type 00 class 0x030000
Sep  5 16:02:05 ####### kernel: [    0.131254] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
Sep  5 16:02:05 ####### kernel: [    0.131264] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
Sep  5 16:02:05 ####### kernel: [    0.131274] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
Sep  5 16:02:05 ####### kernel: [    0.131280] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
Sep  5 16:02:05 ####### kernel: [    0.131287] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
Sep  5 16:02:05 ####### kernel: [    0.131336] pci 0000:01:00.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.131368] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
Sep  5 16:02:05 ####### kernel: [    0.131386] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
Sep  5 16:02:05 ####### kernel: [    0.143400] pci 0000:00:01.0: PCI bridge to [bus 01]
Sep  5 16:02:05 ####### kernel: [    0.143402] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Sep  5 16:02:05 ####### kernel: [    0.143404] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
Sep  5 16:02:05 ####### kernel: [    0.143407] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
Sep  5 16:02:05 ####### kernel: [    0.143467] acpiphp: Slot [1] registered
Sep  5 16:02:05 ####### kernel: [    0.143476] pci 0000:00:1c.0: PCI bridge to [bus 02]
Sep  5 16:02:05 ####### kernel: [    0.143557] pci 0000:03:00.0: [168c:002e] type 00 class 0x028000
Sep  5 16:02:05 ####### kernel: [    0.143621] pci 0000:03:00.0: reg 0x10: [mem 0xf7100000-0xf710ffff 64bit]
Sep  5 16:02:05 ####### kernel: [    0.143788] pci 0000:03:00.0: supports D1
Sep  5 16:02:05 ####### kernel: [    0.143789] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
Sep  5 16:02:05 ####### kernel: [    0.143843] pci 0000:03:00.0: System wakeup disabled by ACPI
Sep  5 16:02:05 ####### kernel: [    0.155420] pci 0000:00:1c.7: PCI bridge to [bus 03]
Sep  5 16:02:05 ####### kernel: [    0.155425] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
Sep  5 16:02:05 ####### kernel: [    0.156036] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
Sep  5 16:02:05 ####### kernel: [    0.156076] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
Sep  5 16:02:05 ####### kernel: [    0.156118] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
Sep  5 16:02:05 ####### kernel: [    0.156160] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
Sep  5 16:02:05 ####### kernel: [    0.156201] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
Sep  5 16:02:05 ####### kernel: [    0.156245] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
Sep  5 16:02:05 ####### kernel: [    0.156289] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
Sep  5 16:02:05 ####### kernel: [    0.156327] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
Sep  5 16:02:05 ####### kernel: [    0.156551] ACPI: Enabled 5 GPEs in block 00 to 3F
Sep  5 16:02:05 ####### kernel: [    0.156634] vgaarb: setting as boot device: PCI:0000:01:00.0
Sep  5 16:02:05 ####### kernel: [    0.156636] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Sep  5 16:02:05 ####### kernel: [    0.156637] vgaarb: loaded
Sep  5 16:02:05 ####### kernel: [    0.156637] vgaarb: bridge control possible 0000:01:00.0
Sep  5 16:02:05 ####### kernel: [    0.156825] SCSI subsystem initialized
Sep  5 16:02:05 ####### kernel: [    0.156855] libata version 3.00 loaded.
Sep  5 16:02:05 ####### kernel: [    0.156871] ACPI: bus type USB registered
Sep  5 16:02:05 ####### kernel: [    0.156882] usbcore: registered new interface driver usbfs
Sep  5 16:02:05 ####### kernel: [    0.156888] usbcore: registered new interface driver hub
Sep  5 16:02:05 ####### kernel: [    0.156898] usbcore: registered new device driver usb
Sep  5 16:02:05 ####### kernel: [    0.156999] PCI: Using ACPI for IRQ routing
Sep  5 16:02:05 ####### kernel: [    0.158211] PCI: pci_cache_line_size set to 64 bytes
Sep  5 16:02:05 ####### kernel: [    0.158262] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
Sep  5 16:02:05 ####### kernel: [    0.158264] e820: reserve RAM buffer [mem 0xc172c000-0xc3ffffff]
Sep  5 16:02:05 ####### kernel: [    0.158265] e820: reserve RAM buffer [mem 0xc2541000-0xc3ffffff]
Sep  5 16:02:05 ####### kernel: [    0.158265] e820: reserve RAM buffer [mem 0xd4357000-0xd7ffffff]
Sep  5 16:02:05 ####### kernel: [    0.158266] e820: reserve RAM buffer [mem 0xd5000000-0xd7ffffff]
Sep  5 16:02:05 ####### kernel: [    0.158267] e820: reserve RAM buffer [mem 0x51f000000-0x51fffffff]
Sep  5 16:02:05 ####### kernel: [    0.158347] NetLabel: Initializing
Sep  5 16:02:05 ####### kernel: [    0.158348] NetLabel:  domain hash size = 128
Sep  5 16:02:05 ####### kernel: [    0.158348] NetLabel:  protocols = UNLABELED CIPSOv4
Sep  5 16:02:05 ####### kernel: [    0.158356] NetLabel:  unlabeled traffic allowed by default
Sep  5 16:02:05 ####### kernel: [    0.158409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Sep  5 16:02:05 ####### kernel: [    0.158412] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Sep  5 16:02:05 ####### kernel: [    0.160429] amd_nb: Cannot enumerate AMD northbridges
Sep  5 16:02:05 ####### kernel: [    0.160446] clocksource: Switched to clocksource hpet
Sep  5 16:02:05 ####### kernel: [    0.165008] AppArmor: AppArmor Filesystem Enabled
Sep  5 16:02:05 ####### kernel: [    0.165057] pnp: PnP ACPI init
Sep  5 16:02:05 ####### kernel: [    0.165133] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165137] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep  5 16:02:05 ####### kernel: [    0.165276] system 00:01: [io  0x0680-0x069f] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165278] system 00:01: [io  0xffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165279] system 00:01: [io  0xffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165281] system 00:01: [io  0xffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165282] system 00:01: [io  0x1c00-0x1cfe] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165283] system 00:01: [io  0x1d00-0x1dfe] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165285] system 00:01: [io  0x1e00-0x1efe] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165286] system 00:01: [io  0x1f00-0x1ffe] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165288] system 00:01: [io  0x1800-0x18fe] could not be reserved
Sep  5 16:02:05 ####### kernel: [    0.165289] system 00:01: [io  0x164e-0x164f] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165291] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep  5 16:02:05 ####### kernel: [    0.165310] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Sep  5 16:02:05 ####### kernel: [    0.165346] system 00:03: [io  0x1854-0x1857] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165348] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Sep  5 16:02:05 ####### kernel: [    0.165417] system 00:04: [io  0x0a00-0x0a1f] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165419] system 00:04: [io  0x0a20-0x0a23] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165421] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep  5 16:02:05 ####### kernel: [    0.165498] system 00:05: [io  0x04d0-0x04d1] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165500] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep  5 16:02:05 ####### kernel: [    0.165913] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165915] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165916] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165918] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165919] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165921] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165922] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165923] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165925] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165926] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
Sep  5 16:02:05 ####### kernel: [    0.165928] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165929] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
Sep  5 16:02:05 ####### kernel: [    0.165931] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep  5 16:02:05 ####### kernel: [    0.166150] pnp: PnP ACPI: found 7 devices
Sep  5 16:02:05 ####### kernel: [    0.172408] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Sep  5 16:02:05 ####### kernel: [    0.172436] pci 0000:00:01.0: PCI bridge to [bus 01]
Sep  5 16:02:05 ####### kernel: [    0.172438] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
Sep  5 16:02:05 ####### kernel: [    0.172440] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
Sep  5 16:02:05 ####### kernel: [    0.172442] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
Sep  5 16:02:05 ####### kernel: [    0.172452] pci 0000:00:1c.0: PCI bridge to [bus 02]
Sep  5 16:02:05 ####### kernel: [    0.172465] pci 0000:00:1c.7: PCI bridge to [bus 03]
Sep  5 16:02:05 ####### kernel: [    0.172469] pci 0000:00:1c.7:   bridge window [mem 0xf7100000-0xf71fffff]
Sep  5 16:02:05 ####### kernel: [    0.172477] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Sep  5 16:02:05 ####### kernel: [    0.172478] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
Sep  5 16:02:05 ####### kernel: [    0.172479] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Sep  5 16:02:05 ####### kernel: [    0.172480] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
Sep  5 16:02:05 ####### kernel: [    0.172481] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
Sep  5 16:02:05 ####### kernel: [    0.172482] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
Sep  5 16:02:05 ####### kernel: [    0.172483] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
Sep  5 16:02:05 ####### kernel: [    0.172484] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
Sep  5 16:02:05 ####### kernel: [    0.172485] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
Sep  5 16:02:05 ####### kernel: [    0.172486] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
Sep  5 16:02:05 ####### kernel: [    0.172488] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
Sep  5 16:02:05 ####### kernel: [    0.172489] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
Sep  5 16:02:05 ####### kernel: [    0.172490] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
Sep  5 16:02:05 ####### kernel: [    0.172491] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
Sep  5 16:02:05 ####### kernel: [    0.172514] NET: Registered protocol family 2
Sep  5 16:02:05 ####### kernel: [    0.172685] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
Sep  5 16:02:05 ####### kernel: [    0.172940] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep  5 16:02:05 ####### kernel: [    0.173049] TCP: Hash tables configured (established 262144 bind 65536)
Sep  5 16:02:05 ####### kernel: [    0.173078] UDP hash table entries: 16384 (order: 7, 524288 bytes)
Sep  5 16:02:05 ####### kernel: [    0.173151] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
Sep  5 16:02:05 ####### kernel: [    0.173241] NET: Registered protocol family 1
Sep  5 16:02:05 ####### kernel: [    0.208537] pci 0000:01:00.0: Video device with shadowed ROM
Sep  5 16:02:05 ####### kernel: [    0.208556] PCI: CLS 64 bytes, default 64
Sep  5 16:02:05 ####### kernel: [    0.208596] Trying to unpack rootfs image as initramfs...
Sep  5 16:02:05 ####### kernel: [    0.616790] Freeing initrd memory: 35356K (ffff880033ae2000 - ffff880035d69000)
Sep  5 16:02:05 ####### kernel: [    0.616807] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Sep  5 16:02:05 ####### kernel: [    0.616809] software IO TLB [mem 0xd0357000-0xd4357000] (64MB) mapped at [ffff8800d0357000-ffff8800d4356fff]
Sep  5 16:02:05 ####### kernel: [    0.616865] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
Sep  5 16:02:05 ####### kernel: [    0.616866] hw unit of domain pp0-core 2^-14 Joules
Sep  5 16:02:05 ####### kernel: [    0.616866] hw unit of domain package 2^-14 Joules
Sep  5 16:02:05 ####### kernel: [    0.616867] hw unit of domain dram 2^-14 Joules
Sep  5 16:02:05 ####### kernel: [    0.616868] hw unit of domain pp1-gpu 2^-14 Joules
Sep  5 16:02:05 ####### kernel: [    0.616987] Scanning for low memory corruption every 60 seconds
Sep  5 16:02:05 ####### kernel: [    0.617254] futex hash table entries: 1024 (order: 4, 65536 bytes)
Sep  5 16:02:05 ####### kernel: [    0.617278] audit: initializing netlink subsys (disabled)
Sep  5 16:02:05 ####### kernel: [    0.617288] audit: type=2000 audit(1473084119.616:1): initialized
Sep  5 16:02:05 ####### kernel: [    0.617611] Initialise system trusted keyring
Sep  5 16:02:05 ####### kernel: [    0.617703] HugeTLB registered 1 GB page size, pre-allocated 0 pages
Sep  5 16:02:05 ####### kernel: [    0.617704] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep  5 16:02:05 ####### kernel: [    0.618690] zbud: loaded
Sep  5 16:02:05 ####### kernel: [    0.618843] VFS: Disk quotas dquot_6.6.0
Sep  5 16:02:05 ####### kernel: [    0.618866] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep  5 16:02:05 ####### kernel: [    0.619049] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sep  5 16:02:05 ####### kernel: [    0.619223] fuse init (API version 7.23)
Sep  5 16:02:05 ####### kernel: [    0.619319] Key type big_key registered
Sep  5 16:02:05 ####### kernel: [    0.619339] Allocating IMA MOK and blacklist keyrings.
Sep  5 16:02:05 ####### kernel: [    0.619683] Key type asymmetric registered
Sep  5 16:02:05 ####### kernel: [    0.619684] Asymmetric key parser 'x509' registered
Sep  5 16:02:05 ####### kernel: [    0.619708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
Sep  5 16:02:05 ####### kernel: [    0.619734] io scheduler noop registered
Sep  5 16:02:05 ####### kernel: [    0.619736] io scheduler deadline registered (default)
Sep  5 16:02:05 ####### kernel: [    0.619756] io scheduler cfq registered
Sep  5 16:02:05 ####### kernel: [    0.620095] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep  5 16:02:05 ####### kernel: [    0.620099] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Sep  5 16:02:05 ####### kernel: [    0.620121] vesafb: mode is 640x480x32, linelength=2560, pages=0
Sep  5 16:02:05 ####### kernel: [    0.620121] vesafb: scrolling: redraw
Sep  5 16:02:05 ####### kernel: [    0.620123] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Sep  5 16:02:05 ####### kernel: [    0.620130] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90003600000, using 1216k, total 1216k
Sep  5 16:02:05 ####### kernel: [    0.620192] Console: switching to colour frame buffer device 80x30
Sep  5 16:02:05 ####### kernel: [    0.620198] fb0: VESA VGA frame buffer device
Sep  5 16:02:05 ####### kernel: [    0.620209] intel_idle: MWAIT substates: 0x42120
Sep  5 16:02:05 ####### kernel: [    0.620210] intel_idle: v0.4.1 model 0x3C
Sep  5 16:02:05 ####### kernel: [    0.620211] intel_idle: lapic_timer_reliable_states 0xffffffff
Sep  5 16:02:05 ####### kernel: [    0.620401] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Sep  5 16:02:05 ####### kernel: [    0.620403] ACPI: Power Button [PWRB]
Sep  5 16:02:05 ####### kernel: [    0.620428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Sep  5 16:02:05 ####### kernel: [    0.620430] ACPI: Power Button [PWRF]
Sep  5 16:02:05 ####### kernel: [    0.620982] thermal LNXTHERM:00: registered as thermal_zone0
Sep  5 16:02:05 ####### kernel: [    0.620984] ACPI: Thermal Zone [TZ00] (28 C)
Sep  5 16:02:05 ####### kernel: [    0.621125] thermal LNXTHERM:01: registered as thermal_zone1
Sep  5 16:02:05 ####### kernel: [    0.621127] ACPI: Thermal Zone [TZ01] (30 C)
Sep  5 16:02:05 ####### kernel: [    0.621161] GHES: HEST is not enabled!
Sep  5 16:02:05 ####### kernel: [    0.621232] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Sep  5 16:02:05 ####### kernel: [    0.622496] Linux agpgart interface v0.103
Sep  5 16:02:05 ####### kernel: [    0.624422] brd: module loaded
Sep  5 16:02:05 ####### kernel: [    0.625300] loop: module loaded
Sep  5 16:02:05 ####### kernel: [    0.625448] libphy: Fixed MDIO Bus: probed
Sep  5 16:02:05 ####### kernel: [    0.625450] tun: Universal TUN/TAP device driver, 1.6
Sep  5 16:02:05 ####### kernel: [    0.625451] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sep  5 16:02:05 ####### kernel: [    0.625486] PPP generic driver version 2.4.2
Sep  5 16:02:05 ####### kernel: [    0.625527] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep  5 16:02:05 ####### kernel: [    0.625529] ehci-pci: EHCI PCI platform driver
Sep  5 16:02:05 ####### kernel: [    0.625620] ehci-pci 0000:00:1a.0: EHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.625624] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
Sep  5 16:02:05 ####### kernel: [    0.625638] ehci-pci 0000:00:1a.0: debug port 2
Sep  5 16:02:05 ####### kernel: [    0.629530] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
Sep  5 16:02:05 ####### kernel: [    0.629538] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7238000
Sep  5 16:02:05 ####### kernel: [    0.640450] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Sep  5 16:02:05 ####### kernel: [    0.640480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Sep  5 16:02:05 ####### kernel: [    0.640481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep  5 16:02:05 ####### kernel: [    0.640483] usb usb1: Product: EHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.640484] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
Sep  5 16:02:05 ####### kernel: [    0.640485] usb usb1: SerialNumber: 0000:00:1a.0
Sep  5 16:02:05 ####### kernel: [    0.640582] hub 1-0:1.0: USB hub found
Sep  5 16:02:05 ####### kernel: [    0.640586] hub 1-0:1.0: 2 ports detected
Sep  5 16:02:05 ####### kernel: [    0.640750] ehci-pci 0000:00:1d.0: EHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.640753] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
Sep  5 16:02:05 ####### kernel: [    0.640761] ehci-pci 0000:00:1d.0: debug port 2
Sep  5 16:02:05 ####### kernel: [    0.644666] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
Sep  5 16:02:05 ####### kernel: [    0.644672] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7237000
Sep  5 16:02:05 ####### kernel: [    0.656483] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Sep  5 16:02:05 ####### kernel: [    0.656503] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Sep  5 16:02:05 ####### kernel: [    0.656505] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep  5 16:02:05 ####### kernel: [    0.656506] usb usb2: Product: EHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.656507] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
Sep  5 16:02:05 ####### kernel: [    0.656508] usb usb2: SerialNumber: 0000:00:1d.0
Sep  5 16:02:05 ####### kernel: [    0.656594] hub 2-0:1.0: USB hub found
Sep  5 16:02:05 ####### kernel: [    0.656597] hub 2-0:1.0: 2 ports detected
Sep  5 16:02:05 ####### kernel: [    0.656684] ehci-platform: EHCI generic platform driver
Sep  5 16:02:05 ####### kernel: [    0.656692] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep  5 16:02:05 ####### kernel: [    0.656694] ohci-pci: OHCI PCI platform driver
Sep  5 16:02:05 ####### kernel: [    0.656701] ohci-platform: OHCI generic platform driver
Sep  5 16:02:05 ####### kernel: [    0.656706] uhci_hcd: USB Universal Host Controller Interface driver
Sep  5 16:02:05 ####### kernel: [    0.656792] xhci_hcd 0000:00:14.0: xHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.656795] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
Sep  5 16:02:05 ####### kernel: [    0.657878] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
Sep  5 16:02:05 ####### kernel: [    0.657883] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Sep  5 16:02:05 ####### kernel: [    0.657946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Sep  5 16:02:05 ####### kernel: [    0.657947] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep  5 16:02:05 ####### kernel: [    0.657948] usb usb3: Product: xHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.657949] usb usb3: Manufacturer: Linux 4.4.0-36-generic xhci-hcd
Sep  5 16:02:05 ####### kernel: [    0.657950] usb usb3: SerialNumber: 0000:00:14.0
Sep  5 16:02:05 ####### kernel: [    0.658039] hub 3-0:1.0: USB hub found
Sep  5 16:02:05 ####### kernel: [    0.658059] hub 3-0:1.0: 14 ports detected
Sep  5 16:02:05 ####### kernel: [    0.660515] xhci_hcd 0000:00:14.0: xHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.660517] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Sep  5 16:02:05 ####### kernel: [    0.660551] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
Sep  5 16:02:05 ####### kernel: [    0.660552] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep  5 16:02:05 ####### kernel: [    0.660553] usb usb4: Product: xHCI Host Controller
Sep  5 16:02:05 ####### kernel: [    0.660554] usb usb4: Manufacturer: Linux 4.4.0-36-generic xhci-hcd
Sep  5 16:02:05 ####### kernel: [    0.660555] usb usb4: SerialNumber: 0000:00:14.0
Sep  5 16:02:05 ####### kernel: [    0.660645] hub 4-0:1.0: USB hub found
Sep  5 16:02:05 ####### kernel: [    0.660660] hub 4-0:1.0: 6 ports detected
Sep  5 16:02:05 ####### kernel: [    0.661772] i8042: PNP: No PS/2 controller found. Probing ports directly.
Sep  5 16:02:05 ####### kernel: [    0.664143] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep  5 16:02:05 ####### kernel: [    0.664146] serio: i8042 AUX port at 0x60,0x64 irq 12
Sep  5 16:02:05 ####### kernel: [    0.664271] mousedev: PS/2 mouse device common for all mice
Sep  5 16:02:05 ####### kernel: [    0.664395] rtc_cmos 00:02: RTC can wake from S4
Sep  5 16:02:05 ####### kernel: [    0.664544] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Sep  5 16:02:05 ####### kernel: [    0.664572] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Sep  5 16:02:05 ####### kernel: [    0.664578] i2c /dev entries driver
Sep  5 16:02:05 ####### kernel: [    0.664614] device-mapper: uevent: version 1.0.3
Sep  5 16:02:05 ####### kernel: [    0.664678] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Sep  5 16:02:05 ####### kernel: [    0.664691] Intel P-state driver initializing.
Sep  5 16:02:05 ####### kernel: [    0.664833] ledtrig-cpu: registered to indicate activity on CPUs
Sep  5 16:02:05 ####### kernel: [    0.665708] NET: Registered protocol family 10
Sep  5 16:02:05 ####### kernel: [    0.666172] NET: Registered protocol family 17
Sep  5 16:02:05 ####### kernel: [    0.666202] Key type dns_resolver registered
Sep  5 16:02:05 ####### kernel: [    0.666671] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
Sep  5 16:02:05 ####### kernel: [    0.666685] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
Sep  5 16:02:05 ####### kernel: [    0.666730] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
Sep  5 16:02:05 ####### kernel: [    0.666752] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
Sep  5 16:02:05 ####### kernel: [    0.666848] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Sep  5 16:02:05 ####### kernel: [    0.667232] registered taskstats version 1
Sep  5 16:02:05 ####### kernel: [    0.667268] Loading compiled-in X.509 certificates
Sep  5 16:02:05 ####### kernel: [    0.669579] Loaded X.509 cert 'Build time autogenerated kernel key: 181cd957879f68b474ab1d0c92722cd44e756f77'
Sep  5 16:02:05 ####### kernel: [    0.669630] zswap: loaded using pool lzo/zbud
Sep  5 16:02:05 ####### kernel: [    0.673113] Key type trusted registered
Sep  5 16:02:05 ####### kernel: [    0.675478] Key type encrypted registered
Sep  5 16:02:05 ####### kernel: [    0.675483] AppArmor: AppArmor sha1 policy hashing enabled
Sep  5 16:02:05 ####### kernel: [    0.675487] ima: No TPM chip found, activating TPM-bypass!
Sep  5 16:02:05 ####### kernel: [    0.675501] evm: HMAC attrs: 0x1
Sep  5 16:02:05 ####### kernel: [    0.675822]   Magic number: 0:838:29
Sep  5 16:02:05 ####### kernel: [    0.675881] memory memory69: hash matches
Sep  5 16:02:05 ####### kernel: [    0.675932] rtc_cmos 00:02: setting system clock to 2016-09-05 14:02:00 UTC (1473084120)
Sep  5 16:02:05 ####### kernel: [    0.675984] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep  5 16:02:05 ####### kernel: [    0.675984] EDD information not available.
Sep  5 16:02:05 ####### kernel: [    0.676038] PM: Hibernation image not present or could not be loaded.
Sep  5 16:02:05 ####### kernel: [    0.676770] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
Sep  5 16:02:05 ####### kernel: [    0.676772] Write protecting the kernel read-only data: 14336k
Sep  5 16:02:05 ####### kernel: [    0.677081] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
Sep  5 16:02:05 ####### kernel: [    0.677354] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
Sep  5 16:02:05 ####### kernel: [    0.684168] random: systemd-udevd urandom read with 3 bits of entropy available
Sep  5 16:02:05 ####### kernel: [    0.707508] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
Sep  5 16:02:05 ####### kernel: [    0.741720] pps_core: LinuxPPS API ver. 1 registered
Sep  5 16:02:05 ####### kernel: [    0.741723] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Sep  5 16:02:05 ####### kernel: [    0.742938] PTP clock support registered
Sep  5 16:02:05 ####### kernel: [    0.747303] [drm] Initialized drm 1.1.0 20060810
Sep  5 16:02:05 ####### kernel: [    0.747441] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
Sep  5 16:02:05 ####### kernel: [    0.747442] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Sep  5 16:02:05 ####### kernel: [    0.747596] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Sep  5 16:02:05 ####### kernel: [    0.758937] wmi: Mapper loaded
Sep  5 16:02:05 ####### kernel: [    0.780256] checking generic (f1000000 130000) vs hw (e0000000 10000000)
Sep  5 16:02:05 ####### kernel: [    0.780259] checking generic (f1000000 130000) vs hw (f0000000 2000000)
Sep  5 16:02:05 ####### kernel: [    0.780261] fb: switching to nouveaufb from VESA VGA
Sep  5 16:02:05 ####### kernel: [    0.780284] Console: switching to colour dummy device 80x25
Sep  5 16:02:05 ####### kernel: [    0.780423] nouveau 0000:01:00.0: NVIDIA GM107 (117010a2)
Sep  5 16:02:05 ####### kernel: [    0.935936] nouveau 0000:01:00.0: bios: version 82.07.32.00.f8
Sep  5 16:02:05 ####### kernel: [    0.936990] nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
Sep  5 16:02:05 ####### kernel: [    0.963960] e1000e 0000:00:19.0 eth0: registered PHC clock
Sep  5 16:02:05 ####### kernel: [    0.963963] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:aa:94:12
Sep  5 16:02:05 ####### kernel: [    0.963965] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
Sep  5 16:02:05 ####### kernel: [    0.964062] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
Sep  5 16:02:05 ####### kernel: [    0.964092] ahci 0000:00:1f.2: version 3.0
Sep  5 16:02:05 ####### kernel: [    0.964390] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x1d impl SATA mode
Sep  5 16:02:05 ####### kernel: [    0.964391] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Sep  5 16:02:05 ####### kernel: [    0.966014] e1000e 0000:00:19.0 enp0s25: renamed from eth0
Sep  5 16:02:05 ####### kernel: [    0.968474] usb 1-1: new high-speed USB device number 2 using ehci-pci
Sep  5 16:02:05 ####### kernel: [    0.972469] usb 2-1: new high-speed USB device number 2 using ehci-pci
Sep  5 16:02:05 ####### kernel: [    0.989228] scsi host0: ahci
Sep  5 16:02:05 ####### kernel: [    0.989394] scsi host1: ahci
Sep  5 16:02:05 ####### kernel: [    0.989529] scsi host2: ahci
Sep  5 16:02:05 ####### kernel: [    0.989656] scsi host3: ahci
Sep  5 16:02:05 ####### kernel: [    0.989787] scsi host4: ahci
Sep  5 16:02:05 ####### kernel: [    0.989828] ata1: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236100 irq 28
Sep  5 16:02:05 ####### kernel: [    0.989829] ata2: DUMMY
Sep  5 16:02:05 ####### kernel: [    0.989837] ata3: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236200 irq 28
Sep  5 16:02:05 ####### kernel: [    0.989840] ata4: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236280 irq 28
Sep  5 16:02:05 ####### kernel: [    0.989843] ata5: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236300 irq 28
Sep  5 16:02:05 ####### kernel: [    1.028700] usb 3-2: new high-speed USB device number 2 using xhci_hcd
Sep  5 16:02:05 ####### kernel: [    1.104839] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
Sep  5 16:02:05 ####### kernel: [    1.104841] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep  5 16:02:05 ####### kernel: [    1.105116] hub 2-1:1.0: USB hub found
Sep  5 16:02:05 ####### kernel: [    1.105207] hub 2-1:1.0: 8 ports detected
Sep  5 16:02:05 ####### kernel: [    1.116856] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
Sep  5 16:02:05 ####### kernel: [    1.116858] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep  5 16:02:05 ####### kernel: [    1.117109] hub 1-1:1.0: USB hub found
Sep  5 16:02:05 ####### kernel: [    1.117210] hub 1-1:1.0: 6 ports detected
Sep  5 16:02:05 ####### kernel: [    1.160768] usb 3-2: New USB device found, idVendor=04b8, idProduct=013d
Sep  5 16:02:05 ####### kernel: [    1.160771] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep  5 16:02:05 ####### kernel: [    1.160772] usb 3-2: Product: Epson Perfection V39
Sep  5 16:02:05 ####### kernel: [    1.160773] usb 3-2: Manufacturer: EPSON
Sep  5 16:02:05 ####### kernel: [    1.160774] usb 3-2: SerialNumber: VCGY003932
Sep  5 16:02:05 ####### kernel: [    1.160880] usb 3-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
Sep  5 16:02:05 ####### kernel: [    1.160883] usb 3-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
Sep  5 16:02:05 ####### kernel: [    1.308497] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Sep  5 16:02:05 ####### kernel: [    1.308568] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep  5 16:02:05 ####### kernel: [    1.308620] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep  5 16:02:05 ####### kernel: [    1.308675] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Sep  5 16:02:05 ####### kernel: [    1.309554] ata4.00: ATA-8: Hitachi HDS721032CLA362, JPFOA39C, max UDMA/133
Sep  5 16:02:05 ####### kernel: [    1.309556] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Sep  5 16:02:05 ####### kernel: [    1.309563] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Sep  5 16:02:05 ####### kernel: [    1.309565] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep  5 16:02:05 ####### kernel: [    1.309566] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep  5 16:02:05 ####### kernel: [    1.310391] ata5.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
Sep  5 16:02:05 ####### kernel: [    1.310393] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Sep  5 16:02:05 ####### kernel: [    1.310491] ata3.00: supports DRM functions and may not be fully accessible
Sep  5 16:02:05 ####### kernel: [    1.310609] ata3.00: READ LOG DMA EXT failed, trying unqueued
Sep  5 16:02:05 ####### kernel: [    1.310613] ata4.00: configured for UDMA/133
Sep  5 16:02:05 ####### kernel: [    1.310671] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
Sep  5 16:02:05 ####### kernel: [    1.310672] ata3.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
Sep  5 16:02:05 ####### kernel: [    1.310674] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
Sep  5 16:02:05 ####### kernel: [    1.310957] ata1.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
Sep  5 16:02:05 ####### kernel: [    1.310963] ata3.00: supports DRM functions and may not be fully accessible
Sep  5 16:02:05 ####### kernel: [    1.311231] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
Sep  5 16:02:05 ####### kernel: [    1.311234] ata3.00: configured for UDMA/133
Sep  5 16:02:05 ####### kernel: [    1.311345] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
Sep  5 16:02:05 ####### kernel: [    1.311347] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Sep  5 16:02:05 ####### kernel: [    1.311348] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Sep  5 16:02:05 ####### kernel: [    1.311876] ata1.00: configured for UDMA/100
Sep  5 16:02:05 ####### kernel: [    1.312120] ata5.00: configured for UDMA/133
Sep  5 16:02:05 ####### kernel: [    1.322251] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB01 PQ: 0 ANSI: 5
Sep  5 16:02:05 ####### kernel: [    1.328440] usb 3-6: new high-speed USB device number 3 using xhci_hcd
Sep  5 16:02:05 ####### kernel: [    1.339326] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Sep  5 16:02:05 ####### kernel: [    1.339328] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep  5 16:02:05 ####### kernel: [    1.339444] sr 0:0:0:0: Attached scsi CD-ROM sr0
Sep  5 16:02:05 ####### kernel: [    1.339506] sr 0:0:0:0: Attached scsi generic sg0 type 5
Sep  5 16:02:05 ####### kernel: [    1.339986] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB6Q PQ: 0 ANSI: 5
Sep  5 16:02:05 ####### kernel: [    1.340224] sd 2:0:0:0: Attached scsi generic sg1 type 0
Sep  5 16:02:05 ####### kernel: [    1.340225] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
Sep  5 16:02:05 ####### kernel: [    1.340264] sd 2:0:0:0: [sda] Write Protect is off
Sep  5 16:02:05 ####### kernel: [    1.340267] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep  5 16:02:05 ####### kernel: [    1.340278] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  5 16:02:05 ####### kernel: [    1.340749]  sda: sda1 sda2 < sda5 >
Sep  5 16:02:05 ####### kernel: [    1.340918] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS72103 A39C PQ: 0 ANSI: 5
Sep  5 16:02:05 ####### kernel: [    1.341173] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Sep  5 16:02:05 ####### kernel: [    1.341275] sd 3:0:0:0: [sdb] Write Protect is off
Sep  5 16:02:05 ####### kernel: [    1.341279] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Sep  5 16:02:05 ####### kernel: [    1.341314] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  5 16:02:05 ####### kernel: [    1.341439] sd 3:0:0:0: Attached scsi generic sg2 type 0
Sep  5 16:02:05 ####### kernel: [    1.341982] sd 2:0:0:0: [sda] Attached SCSI disk
Sep  5 16:02:05 ####### kernel: [    1.342062] scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
Sep  5 16:02:05 ####### kernel: [    1.342244] sd 4:0:0:0: Attached scsi generic sg3 type 0
Sep  5 16:02:05 ####### kernel: [    1.342317] sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Sep  5 16:02:05 ####### kernel: [    1.342318] sd 4:0:0:0: [sdc] 4096-byte physical blocks
Sep  5 16:02:05 ####### kernel: [    1.342425] sd 4:0:0:0: [sdc] Write Protect is off
Sep  5 16:02:05 ####### kernel: [    1.342428] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Sep  5 16:02:05 ####### kernel: [    1.342469] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep  5 16:02:05 ####### kernel: [    1.365186]  sdb: sdb1 sdb2 sdb3
Sep  5 16:02:05 ####### kernel: [    1.365630] sd 3:0:0:0: [sdb] Attached SCSI disk
Sep  5 16:02:05 ####### kernel: [    1.414683]  sdc: sdc1 sdc2 sdc3 sdc4
Sep  5 16:02:05 ####### kernel: [    1.415212] sd 4:0:0:0: [sdc] Attached SCSI disk
Sep  5 16:02:05 ####### kernel: [    1.456623] usb 3-6: New USB device found, idVendor=0409, idProduct=005a
Sep  5 16:02:05 ####### kernel: [    1.456626] usb 3-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep  5 16:02:05 ####### kernel: [    1.456981] hub 3-6:1.0: USB hub found
Sep  5 16:02:05 ####### kernel: [    1.457006] hub 3-6:1.0: 4 ports detected
Sep  5 16:02:05 ####### kernel: [    1.616480] tsc: Refined TSC clocksource calibration: 2993.059 MHz
Sep  5 16:02:05 ####### kernel: [    1.616484] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b24a87f91f, max_idle_ns: 440795224414 ns
Sep  5 16:02:05 ####### kernel: [    1.624471] usb 3-8: new full-speed USB device number 4 using xhci_hcd
Sep  5 16:02:05 ####### kernel: [    1.755725] usb 3-8: New USB device found, idVendor=046d, idProduct=c52b
Sep  5 16:02:05 ####### kernel: [    1.755728] usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep  5 16:02:05 ####### kernel: [    1.755729] usb 3-8: Product: USB Receiver
Sep  5 16:02:05 ####### kernel: [    1.755730] usb 3-8: Manufacturer: Logitech
Sep  5 16:02:05 ####### kernel: [    1.762078] hidraw: raw HID events driver (C) Jiri Kosina
Sep  5 16:02:05 ####### kernel: [    1.770539] usbcore: registered new interface driver usbhid
Sep  5 16:02:05 ####### kernel: [    1.770542] usbhid: USB HID core driver
Sep  5 16:02:05 ####### kernel: [    1.774827] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
Sep  5 16:02:05 ####### kernel: [    1.840456] usb 3-6.3: new full-speed USB device number 5 using xhci_hcd
Sep  5 16:02:05 ####### kernel: [    1.901479] input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input5
Sep  5 16:02:05 ####### kernel: [    1.901653] logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:14.0-8:1
Sep  5 16:02:05 ####### kernel: [    1.905515] input: Logitech K330 as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input6
Sep  5 16:02:05 ####### kernel: [    1.905615] logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:14.0-8:2
Sep  5 16:02:05 ####### kernel: [    1.945695] usb 3-6.3: New USB device found, idVendor=04a9, idProduct=1072
Sep  5 16:02:05 ####### kernel: [    1.945698] usb 3-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep  5 16:02:05 ####### kernel: [    1.945699] usb 3-6.3: Product: i850
Sep  5 16:02:05 ####### kernel: [    1.945700] usb 3-6.3: Manufacturer: Canon
Sep  5 16:02:05 ####### kernel: [    1.945701] usb 3-6.3: SerialNumber: 100YMA
Sep  5 16:02:05 ####### kernel: [    2.236549] [TTM] Zone  kernel: Available graphics memory: 10174028 kiB
Sep  5 16:02:05 ####### kernel: [    2.236551] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
Sep  5 16:02:05 ####### kernel: [    2.236552] [TTM] Initializing pool allocator
Sep  5 16:02:05 ####### kernel: [    2.236556] [TTM] Initializing DMA pool allocator
Sep  5 16:02:05 ####### kernel: [    2.236564] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
Sep  5 16:02:05 ####### kernel: [    2.236565] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
Sep  5 16:02:05 ####### kernel: [    2.236567] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
Sep  5 16:02:05 ####### kernel: [    2.236568] nouveau 0000:01:00.0: DRM: DCB version 4.0
Sep  5 16:02:05 ####### kernel: [    2.236570] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
Sep  5 16:02:05 ####### kernel: [    2.236571] nouveau 0000:01:00.0: DRM: DCB outp 01: 02011f10 00000000
Sep  5 16:02:05 ####### kernel: [    2.236572] nouveau 0000:01:00.0: DRM: DCB outp 02: 02022f62 00020010
Sep  5 16:02:05 ####### kernel: [    2.236573] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001031
Sep  5 16:02:05 ####### kernel: [    2.236574] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
Sep  5 16:02:05 ####### kernel: [    2.236575] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
Sep  5 16:02:05 ####### kernel: [    2.252314] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Sep  5 16:02:05 ####### kernel: [    2.252315] [drm] Driver supports precise vblank timestamp query.
Sep  5 16:02:05 ####### kernel: [    2.341096] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
Sep  5 16:02:05 ####### kernel: [    2.462505] nouveau 0000:01:00.0: DRM: allocated 1280x1024 fb: 0x60000, bo ffff880500673400
Sep  5 16:02:05 ####### kernel: [    2.462583] fbcon: nouveaufb (fb0) is primary device
Sep  5 16:02:05 ####### kernel: [    2.462646] Console: switching to colour frame buffer device 160x64
Sep  5 16:02:05 ####### kernel: [    2.462666] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
Sep  5 16:02:05 ####### kernel: [    2.472472] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
Sep  5 16:02:05 ####### kernel: [    2.565240] random: nonblocking pool is initialized
Sep  5 16:02:05 ####### kernel: [    2.616507] clocksource: Switched to clocksource tsc
Sep  5 16:02:05 ####### kernel: [    2.684986] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    2.832098] lp: driver loaded but no devices found
Sep  5 16:02:05 ####### kernel: [    2.837329] ppdev: user-space parallel port driver
Sep  5 16:02:05 ####### kernel: [    2.915193] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Sep  5 16:02:05 ####### kernel: [    3.269072] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Sep  5 16:02:05 ####### kernel: [    3.408305] snd_hda_intel 0000:01:00.1: Disabling MSI
Sep  5 16:02:05 ####### kernel: [    3.408310] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
Sep  5 16:02:05 ####### kernel: [    3.447991] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x18/0x0) type:line
Sep  5 16:02:05 ####### kernel: [    3.447995] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Sep  5 16:02:05 ####### kernel: [    3.447997] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Sep  5 16:02:05 ####### kernel: [    3.447998] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
Sep  5 16:02:05 ####### kernel: [    3.448004] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x1e
Sep  5 16:02:05 ####### kernel: [    3.448005] snd_hda_codec_realtek hdaudioC0D2:    inputs:
Sep  5 16:02:05 ####### kernel: [    3.448006] snd_hda_codec_realtek hdaudioC0D2:      Mic=0x19
Sep  5 16:02:05 ####### kernel: [    3.448008] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
Sep  5 16:02:05 ####### kernel: [    3.453412] usblp 3-6.3:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
Sep  5 16:02:05 ####### kernel: [    3.453437] usbcore: registered new interface driver usblp
Sep  5 16:02:05 ####### kernel: [    3.462140] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Sep  5 16:02:05 ####### kernel: [    3.462199] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Sep  5 16:02:05 ####### kernel: [    3.462253] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Sep  5 16:02:05 ####### kernel: [    3.462305] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Sep  5 16:02:05 ####### kernel: [    3.462357] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Sep  5 16:02:05 ####### kernel: [    3.462408] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Sep  5 16:02:05 ####### kernel: [    3.462457] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
Sep  5 16:02:05 ####### kernel: [    3.502047] AVX2 version of gcm_enc/dec engaged.
Sep  5 16:02:05 ####### kernel: [    3.502050] AES CTR mode by8 optimization enabled
Sep  5 16:02:05 ####### kernel: [    3.504657] ath: phy0: ASPM enabled: 0x43
Sep  5 16:02:05 ####### kernel: [    3.504661] ath: EEPROM regdomain: 0x809c
Sep  5 16:02:05 ####### kernel: [    3.504662] ath: EEPROM indicates we should expect a country code
Sep  5 16:02:05 ####### kernel: [    3.504663] ath: doing EEPROM country->regdmn map search
Sep  5 16:02:05 ####### kernel: [    3.504664] ath: country maps to regdmn code: 0x52
Sep  5 16:02:05 ####### kernel: [    3.504665] ath: Country alpha2 being used: CN
Sep  5 16:02:05 ####### kernel: [    3.504666] ath: Regpair used: 0x52
Sep  5 16:02:05 ####### kernel: [    3.521148] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sep  5 16:02:05 ####### kernel: [    3.521525] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90003760000, irq=19
Sep  5 16:02:05 ####### kernel: [    3.521543] Adding 21487612k swap on /dev/sda5.  Priority:-1 extents:1 across:21487612k SSFS
Sep  5 16:02:05 ####### kernel: [    3.575977] intel_rapl: Found RAPL domain package
Sep  5 16:02:05 ####### kernel: [    3.575981] intel_rapl: Found RAPL domain core
Sep  5 16:02:05 ####### kernel: [    3.575986] intel_rapl: Found RAPL domain dram
Sep  5 16:02:05 ####### kernel: [    3.575989] intel_rapl: RAPL package 0 domain package locked by BIOS
Sep  5 16:02:05 ####### kernel: [    3.575992] intel_rapl: RAPL package 0 domain dram locked by BIOS
Sep  5 16:02:05 ####### kernel: [    3.710106] cfg80211: World regulatory domain updated:
Sep  5 16:02:05 ####### kernel: [    3.710108] cfg80211:  DFS Master region: unset
Sep  5 16:02:05 ####### kernel: [    3.710109] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sep  5 16:02:05 ####### kernel: [    3.710110] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.710111] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.710112] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.710113] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.710115] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Sep  5 16:02:05 ####### kernel: [    3.710115] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sep  5 16:02:05 ####### kernel: [    3.710116] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.710117] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.722986] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
Sep  5 16:02:05 ####### kernel: [    3.761017] cfg80211: Regulatory domain changed to country: CN
Sep  5 16:02:05 ####### kernel: [    3.761020] cfg80211:  DFS Master region: FCC
Sep  5 16:02:05 ####### kernel: [    3.761021] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sep  5 16:02:05 ####### kernel: [    3.761022] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.761023] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.761024] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Sep  5 16:02:05 ####### kernel: [    3.761025] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.761026] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.761027] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.761028] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
Sep  5 16:02:05 ####### kernel: [    3.837029] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
Sep  5 16:02:05 ####### kernel: [    3.837101] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
Sep  5 16:02:05 ####### kernel: [    4.420917] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    4.779030] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    4.840794] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    5.394946] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    5.593130] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    5.834484] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    5.901934] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Sep  5 16:02:05 ####### kernel: [    5.993542] audit: type=1400 audit(1473084125.812:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2847 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.993549] audit: type=1400 audit(1473084125.812:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2847 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.993554] audit: type=1400 audit(1473084125.812:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2847 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.993559] audit: type=1400 audit(1473084125.812:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2847 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.993696] audit: type=1400 audit(1473084125.812:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2846 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.993703] audit: type=1400 audit(1473084125.812:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2846 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.994831] audit: type=1400 audit(1473084125.812:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=2850 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.995407] audit: type=1400 audit(1473084125.812:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/lookip" pid=2851 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.996269] audit: type=1400 audit(1473084125.812:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2852 comm="apparmor_parser"
Sep  5 16:02:05 ####### kernel: [    5.997018] audit: type=1400 audit(1473084125.816:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2853 comm="apparmor_parser"
Sep  5 16:02:05 ####### systemd[1]: Starting Detect the available GPUs and deal with any system changes...
Sep  5 16:02:05 ####### gpu-manager[2945]: /etc/modprobe.d is not a file
Sep  5 16:02:05 ####### systemd[1]: Starting LSB: daemon to balance interrupts for SMP systems...
Sep  5 16:02:05 ####### gpu-manager[2945]: /etc/modprobe.d is not a file
Sep  5 16:02:05 ####### systemd[1]: Starting Login Service...
Sep  5 16:02:05 ####### systemd[1]: Starting VirtualBox Linux kernel module...
Sep  5 16:02:05 ####### gpu-manager[2945]: /etc/modprobe.d is not a file
Sep  5 16:02:05 ####### systemd[1]: Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
Sep  5 16:02:05 ####### anacron[2942]: Anacron 2.3 started on 2016-09-05
Sep  5 16:02:05 ####### gpu-manager[2945]: /etc/modprobe.d is not a file
Sep  5 16:02:05 ####### systemd[1]: Starting Accounts Service...
Sep  5 16:02:05 ####### gpu-manager[2945]: /etc/modprobe.d is not a file
Sep  5 16:02:05 ####### anacron[2942]: Normal exit (0 jobs run)
Sep  5 16:02:05 ####### systemd[1]: Started CUPS Scheduler.
Sep  5 16:02:05 ####### smartd[2915]: smartd 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-36-generic] (local build)
Sep  5 16:02:05 ####### smartd[2915]: Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Sep  5 16:02:05 ####### smartd[2915]: Opened configuration file /etc/smartd.conf
Sep  5 16:02:05 ####### smartd[2915]: Drive: DEVICESCAN, implied '-a' Directive on line 21 of file /etc/smartd.conf
Sep  5 16:02:05 ####### smartd[2915]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Sep  5 16:02:05 ####### systemd[1]: Reached target Printer.
Sep  5 16:02:05 ####### smartd[2915]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Sep  5 16:02:05 ####### systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Sep  5 16:02:05 ####### smartd[2915]: Device: /dev/sda [SAT], opened
Sep  5 16:02:05 ####### systemd[1]: Starting Automatic USB/Bluetooth printer setup (-devices-pci0000:00-0000:00:14.0-usb3-3\x2d6-3\x2d6.3)...
Sep  5 16:02:05 ####### smartd[2915]: Device: /dev/sda [SAT], Samsung SSD 840 EVO 250GB, S/N:S1DBNSBF374755V, WWN:5-002538-8a030a113, FW:EXT0BB6Q, 250 GB
Sep  5 16:02:05 ####### systemd[1]: Starting Restore /etc/resolv.conf if the system crashed before the ppp link was shut down...
Sep  5 16:02:05 ####### systemd[1]: Starting Thermal Daemon Service...
Sep  5 16:02:05 ####### smartd[2915]: Device: /dev/sda [SAT], found in smartd database: Samsung based SSDs
Sep  5 16:02:05 ####### systemd[1]: Starting Permit User Sessions...
Sep  5 16:02:05 ####### systemd[1]: Starting Initialize hardware monitoring sensors...
Sep  5 16:02:05 ####### systemd[1]: Starting Save/Restore Sound Card State...
Sep  5 16:02:05 ####### systemd[1]: Started D-Bus System Message Bus.
Sep  5 16:02:05 ####### dbus[3008]: [system] AppArmor D-Bus mediation is enabled
Sep  5 16:02:05 ####### dbus[3008]: [system] Successfully activated service 'org.freedesktop.systemd1'
Sep  5 16:02:05 ####### smartd[2915]: Device: /dev/sda [SAT], can't monitor Current_Pending_Sector count - no Attribute 197
Sep  5 16:02:05 ####### smartd[2915]: Device: /dev/sda [SAT], can't monitor Offline_Uncorrectable count - no Attribute 198
Sep  5 16:02:05 ####### systemd[1]: Started ClamAV virus database updater.
Sep  5 16:02:05 ####### systemd[1]: Started crash report submission daemon.
Sep  5 16:02:05 ####### systemd[1]: Started Regular background program processing daemon.
Sep  5 16:02:05 ####### systemd[1]: Starting LSB: Speech Dispatcher...
Sep  5 16:02:05 ####### systemd[1]: Starting Modem Manager...
Sep  5 16:02:05 ####### systemd[1]: Started Snappy daemon.
Sep  5 16:02:06 ####### smartd[2915]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Sep  5 16:02:06 ####### smartd[2915]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.Samsung_SSD_840_EVO_250GB-S1DBNSBF374755V.ata.state
Sep  5 16:02:06 ####### systemd[1]: Started System Logging Service.
Sep  5 16:02:06 ####### avahi-daemon[2996]: Found user 'avahi' (UID 111) and group 'avahi' (GID 120).
Sep  5 16:02:06 ####### avahi-daemon[2996]: Successfully dropped root privileges.
Sep  5 16:02:06 ####### avahi-daemon[2996]: avahi-daemon 0.6.32-rc starting up.
Sep  5 16:02:06 ####### avahi-daemon[2996]: Successfully called chroot().
Sep  5 16:02:06 ####### avahi-daemon[2996]: Successfully dropped remaining capabilities.
Sep  5 16:02:06 ####### systemd[1]: Started Restore /etc/resolv.conf if the system crashed before the ppp link was shut down.
Sep  5 16:02:06 ####### avahi-daemon[2996]: No service file found in /etc/avahi/services.
Sep  5 16:02:06 ####### systemd[1]: Started Permit User Sessions.
Sep  5 16:02:06 ####### cron[3021]: (CRON) INFO (pidfile fd = 3)
Sep  5 16:02:06 ####### avahi-daemon[2996]: Network interface enumeration completed.
Sep  5 16:02:06 ####### avahi-daemon[2996]: Server startup complete. Host name is #######.local. Local service cookie is 12669681.
Sep  5 16:02:06 ####### systemd[1]: Started Initialize hardware monitoring sensors.
Sep  5 16:02:06 ####### sensors[3032]: acpitz-virtual-0
Sep  5 16:02:06 ####### sensors[3032]: Adapter: Virtual device
Sep  5 16:02:06 ####### sensors[3032]: temp1:        +27.8°C  (crit = +105.0°C)
Sep  5 16:02:06 ####### sensors[3032]: temp2:        +29.8°C  (crit = +105.0°C)
Sep  5 16:02:06 ####### sensors[3032]: nouveau-pci-0100
Sep  5 16:02:06 ####### sensors[3032]: Adapter: PCI adapter
Sep  5 16:02:06 ####### sensors[3032]: temp1:        +35.0°C  (high = +95.0°C, hyst =  +3.0°C)
Sep  5 16:02:06 ####### sensors[3032]:                        (crit = +105.0°C, hyst =  +5.0°C)
Sep  5 16:02:06 ####### sensors[3032]:                        (emerg = +135.0°C, hyst =  +5.0°C)
Sep  5 16:02:06 ####### sensors[3032]: coretemp-isa-0000
Sep  5 16:02:06 ####### sensors[3032]: Adapter: ISA adapter
Sep  5 16:02:06 ####### sensors[3032]: Physical id 0:  +46.0°C  (high = +80.0°C, crit = +100.0°C)
Sep  5 16:02:06 ####### sensors[3032]: Core 0:         +46.0°C  (high = +80.0°C, crit = +100.0°C)
Sep  5 16:02:06 ####### sensors[3032]: Core 1:         +45.0°C  (high = +80.0°C, crit = +100.0°C)
Sep  5 16:02:06 ####### systemd[1]: Started Save/Restore Sound Card State.
Sep  5 16:02:06 ####### acpid: starting up with netlink and the input layer
Sep  5 16:02:06 ####### cron[3021]: (CRON) INFO (Running @reboot jobs)
Sep  5 16:02:06 ####### ModemManager[3023]: <info>  ModemManager (version 1.4.12) starting in system bus...
Sep  5 16:02:06 ####### thermald[2999]: 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3)
Sep  5 16:02:06 ####### thermald[2999]: Polling mode is enabled: 4
Sep  5 16:02:06 ####### acpid: 9 rules loaded
Sep  5 16:02:06 ####### acpid: waiting for events: event logging is off
Sep  5 16:02:06 ####### dbus[3008]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkitd.service'
Sep  5 16:02:06 ####### gpu-manager[2945]: update-alternatives: erreur: pas d'alternatives pour x86_64-linux-gnu_gfxcore_conf
Sep  5 16:02:06 ####### wicd[2913]:  * Starting Network connection manager wicd
Sep  5 16:02:06 ####### systemd[1]: Started Detect the available GPUs and deal with any system changes.
Sep  5 16:02:06 ####### thermald[2999]: sysfs write failed enabled
Sep  5 16:02:06 ####### thermald[2999]: sysfs read failed constraint_0_max_power_uw
Sep  5 16:02:06 ####### thermald[2999]: sysfs write failed trip_point_0_temp
Sep  5 16:02:06 ####### thermald[2999]: sysfs write failed trip_point_0_temp
Sep  5 16:02:06 ####### udev-configure-printer[2997]: add /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3
Sep  5 16:02:06 ####### udev-configure-printer[2997]: device devpath is /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6.3
Sep  5 16:02:06 ####### udev-configure-printer[2997]: MFG:Canon MDL:i850 SERN:- serial:100YMA
Sep  5 16:02:06 ####### smartd[2915]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
Sep  5 16:02:06 ####### smartd[2915]: Device: /dev/sdb [SAT], opened
Sep  5 16:02:06 ####### smartd[2915]: Device: /dev/sdb [SAT], Hitachi HDS721032CLA362, S/N:JP1421HN15D0HC, WWN:5-000cca-35bd08a77, FW:JPFOA39C, 320 GB
Sep  5 16:02:06 ####### smartd[2915]: Device: /dev/sdb [SAT], found in smartd database: Hitachi Deskstar 7K1000.C
Sep  5 16:02:06 ####### systemd[1]: Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
Sep  5 16:02:06 ####### apport[2934]:  * Starting automatic crash report generation: apport
Sep  5 16:02:06 ####### systemd[1]: Started LSB: Record successful boot for GRUB.
Sep  5 16:02:06 ####### apport[2934]:    ...done.
Sep  5 16:02:06 ####### irqbalance[2954]:  * Starting SMP IRQ Balancer: irqbalance
Sep  5 16:02:06 ####### systemd[1]: Started LSB: automatic crash report generation.
Sep  5 16:02:06 ####### irqbalance[2954]:    ...done.
Sep  5 16:02:06 ####### systemd[1]: Started LSB: daemon to balance interrupts for SMP systems.
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/system-info
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/login
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/logout
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/icons/{name}/icon
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/find
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/snaps
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/snaps/{name}
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/interfaces
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/assertions
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/assertions/{assertType}
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/events
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/changes/{id}
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/changes
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/create-user
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/buy
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/buy/methods
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:192: DEBUG: adding /v2/snapctl
Sep  5 16:02:06 ####### speech-dispatcher[3022]:  * speech-dispatcher disabled; edit /etc/default/speech-dispatcher
Sep  5 16:02:06 ####### /usr/lib/snapd/snapd[3024]: daemon.go:182: DEBUG: init done in 704.272µs
Sep  5 16:02:06 ####### systemd[1]: Started LSB: Speech Dispatcher.
Sep  5 16:02:06 ####### dbus[3008]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Sep  5 16:02:06 ####### systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Sep  5 16:02:06 ####### systemd[1]: Started Thermal Daemon Service.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Using lock path: /var/lock/whoopsie/lock
Sep  5 16:02:06 ####### systemd[1]: Started Login Service.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Could not get the Network Manager state:
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Parsing /var/crash/_usr_bin_menulibre.1000.crash.
Sep  5 16:02:06 ####### freshclam[3017]: ClamAV update process started at Mon Sep  5 16:02:06 2016
Sep  5 16:02:06 ####### freshclam[3017]: WARNING: Can't query current.cvd.clamav.net
Sep  5 16:02:06 ####### freshclam[3017]: WARNING: Invalid DNS reply. Falling back to HTTP mode.
Sep  5 16:02:06 ####### freshclam[3017]: Reading CVD header (main.cvd): WARNING: Can't get information about db.local.clamav.net: Temporary failure in name resolution
Sep  5 16:02:06 ####### freshclam[3017]: WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Sep  5 16:02:06 ####### freshclam[3017]: Trying again in 5 secs...
Sep  5 16:02:06 ####### systemd[1]: Starting Manage, Install and Generate Color Profiles...
Sep  5 16:02:06 ####### systemd[1]: Starting Authenticate and Authorize Users to Run Privileged Tasks...
Sep  5 16:02:06 ####### systemd[1]: Started Make remote CUPS printers available locally.
Sep  5 16:02:06 ####### systemd[1]: Starting LSB: lm-sensors daemon...
Sep  5 16:02:06 ####### systemd[1]: Starting Light Display Manager...
Sep  5 16:02:06 ####### systemd[1]: Started Raise network interfaces.
Sep  5 16:02:06 ####### systemd[1]: Reached target Network.
Sep  5 16:02:06 ####### systemd[1]: Starting The PHP 7.0 FastCGI Process Manager...
Sep  5 16:02:06 ####### systemd[1]: Starting MySQL Community Server...
Sep  5 16:02:06 ####### systemd[1]: Reached target Network is Online.
Sep  5 16:02:06 ####### systemd[1]: Starting LSB: Apache2 web server...
Sep  5 16:02:06 ####### systemd[1]: Starting LSB: disk temperature monitoring daemon...
Sep  5 16:02:06 ####### systemd[1]: Starting /etc/rc.local Compatibility...
Sep  5 16:02:06 ####### systemd[1]: Started /etc/rc.local Compatibility.
Sep  5 16:02:06 ####### kernel: [    6.347953] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
Sep  5 16:02:06 ####### kernel: [    6.352923] vboxdrv: Found 4 processor cores
Sep  5 16:02:06 ####### polkitd[3139]: started daemon version 0.105 using authority implementation `local' version `0.105'
Sep  5 16:02:06 ####### dbus[3008]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep  5 16:02:06 ####### accounts-daemon[2986]: started daemon version 0.6.40
Sep  5 16:02:06 ####### systemd[1]: Started Authenticate and Authorize Users to Run Privileged Tasks.
Sep  5 16:02:06 ####### dbus[3008]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Sep  5 16:02:06 ####### systemd[1]: Started Accounts Service.
Sep  5 16:02:06 ####### systemd[1]: Started Manage, Install and Generate Color Profiles.
Sep  5 16:02:06 ####### sensord[3141]:  * Starting sensor daemon sensord
Sep  5 16:02:06 ####### systemd[1]: Started Modem Manager.
Sep  5 16:02:06 ####### kernel: [    6.383739] vboxdrv: TSC mode is Invariant, tentative frequency 2993057551 Hz
Sep  5 16:02:06 ####### kernel: [    6.383742] vboxdrv: Successfully loaded version 5.0.26 (interface 0x00240000)
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Uploading /var/crash/_usr_bin_menulibre.1000.crash.
Sep  5 16:02:06 ####### systemd[1]: Started LSB: disk temperature monitoring daemon.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Sent; server replied with: Couldn't resolve host name
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Response code: 0
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Parsing /var/crash/_usr_bin_xfce4-panel.1000.crash.
Sep  5 16:02:06 ####### apache2[3158]:  * Starting Apache httpd web server apache2
Sep  5 16:02:06 ####### systemd[1]: Received SIGRTMIN+21 from PID 1368 (plymouthd).
Sep  5 16:02:06 ####### sensord: sensord started
Sep  5 16:02:06 ####### sensord: Chip: acpitz-virtual-0
Sep  5 16:02:06 ####### sensord: Adapter: Virtual device
Sep  5 16:02:06 ####### sensord:   temp1: 27.8 C
Sep  5 16:02:06 ####### sensord:   temp2: 29.8 C
Sep  5 16:02:06 ####### sensord: Chip: nouveau-pci-0100
Sep  5 16:02:06 ####### sensord: Adapter: PCI adapter
Sep  5 16:02:06 ####### sensord:   temp1: 36.0 C (limit = 95.0 C, hysteresis = 3.0 C)
Sep  5 16:02:06 ####### sensord: Chip: coretemp-isa-0000
Sep  5 16:02:06 ####### sensord: Adapter: ISA adapter
Sep  5 16:02:06 ####### sensord:   Physical id 0: 46.0 C
Sep  5 16:02:06 ####### sensord:   Core 0: 46.0 C
Sep  5 16:02:06 ####### sensord:   Core 1: 45.0 C
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Uploading /var/crash/_usr_bin_xfce4-panel.1000.crash.
Sep  5 16:02:06 ####### sensord[3141]:    ...done.
Sep  5 16:02:06 ####### systemd[1]: Started LSB: lm-sensors daemon.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Sent; server replied with: Couldn't resolve host name
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Response code: 0
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Parsing /var/crash/_usr_bin_thunar.1000.crash.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Uploading /var/crash/_usr_bin_thunar.1000.crash.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Sent; server replied with: Couldn't resolve host name
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Response code: 0
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Parsing /var/crash/_usr_bin_xfdesktop.1000.crash.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Uploading /var/crash/_usr_bin_xfdesktop.1000.crash.
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Sent; server replied with: Couldn't resolve host name
Sep  5 16:02:06 ####### whoopsie[3019]: [16:02:06] Response code: 0
Sep  5 16:02:06 ####### systemd[1]: Starting Hold until boot process finishes up...
Sep  5 16:02:06 ####### colord[3134]: (colord:3134): Cd-WARNING **: failed to get session [pid 2993]: Aucun périphérique ou adresse
Sep  5 16:02:06 ####### wicd[2913]:    ...done.
Sep  5 16:02:06 ####### systemd[1]: Started LSB: Starts and stops Wicd.
Sep  5 16:02:06 ####### systemd[1]: Started Light Display Manager.
Sep  5 16:02:06 ####### kernel: [    6.561225] NET: Registered protocol family 4
Sep  5 16:02:06 ####### systemd[1]: Started Hold until boot process finishes up.
Sep  5 16:02:06 ####### systemd[1]: Started Getty on tty1.
Sep  5 16:02:06 ####### systemd[1]: Reached target Login Prompts.
Sep  5 16:02:06 ####### systemd[1]: Starting Set console scheme...
Sep  5 16:02:06 ####### systemd[1]: Started Set console scheme.
Sep  5 16:02:06 ####### kernel: [    6.573987] NET: Registered protocol family 5
Sep  5 16:02:06 ####### kernel: [    6.590543] VBoxNetFlt: Successfully started.
Sep  5 16:02:06 ####### kernel: [    6.594476] VBoxNetAdp: Successfully started.
Sep  5 16:02:06 ####### kernel: [    6.596376] VBoxPciLinuxInit
Sep  5 16:02:06 ####### kernel: [    6.601596] vboxpci: IOMMU not found (not registered)
Sep  5 16:02:06 ####### vboxdrv.sh[2963]: Starting VirtualBox kernel modules ...done.
Sep  5 16:02:06 ####### systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
Sep  5 16:02:06 ####### kernel: [    6.614743] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Sep  5 16:02:06 ####### systemd[1]: Started VirtualBox Linux kernel module.
Sep  5 16:02:06 ####### systemd[1]: Starting vboxweb-service.service...
Sep  5 16:02:06 ####### systemd[1]: Starting vboxballoonctrl-service.service...
Sep  5 16:02:06 ####### systemd[1]: Starting vboxautostart-service.service...
Sep  5 16:02:06 ####### systemd[1]: Started vboxweb-service.service.
Sep  5 16:02:06 ####### systemd[1]: Started vboxballoonctrl-service.service.
Sep  5 16:02:06 ####### systemd[1]: Started vboxautostart-service.service.
Sep  5 16:02:07 ####### systemd[1]: Created slice User Slice of lightdm.
Sep  5 16:02:07 ####### systemd[1]: Started Session c1 of user lightdm.
Sep  5 16:02:07 ####### systemd[1]: Starting User Manager for UID 108...
Sep  5 16:02:07 ####### smartd[2915]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
Sep  5 16:02:07 ####### smartd[2915]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.Hitachi_HDS721032CLA362-JP1421HN15D0HC.ata.state
Sep  5 16:02:07 ####### systemd[3370]: Reached target Paths.
Sep  5 16:02:07 ####### systemd[3370]: Reached target Sockets.
Sep  5 16:02:07 ####### systemd[3370]: Reached target Timers.
Sep  5 16:02:07 ####### systemd[3370]: Reached target Basic System.
Sep  5 16:02:07 ####### systemd[3370]: Reached target Default.
Sep  5 16:02:07 ####### systemd[3370]: Startup finished in 13ms.
Sep  5 16:02:07 ####### systemd[1]: Started User Manager for UID 108.
Sep  5 16:02:07 ####### smartd[2915]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
Sep  5 16:02:07 ####### smartd[2915]: Device: /dev/sdc [SAT], opened
Sep  5 16:02:07 ####### systemd[1]: Started MySQL Community Server.
Sep  5 16:02:07 ####### smartd[2915]: Device: /dev/sdc [SAT], TOSHIBA DT01ACA100, S/N:64E1ANPNS, WWN:5-000039-ffbc09c6a, FW:MS2OA750, 1.00 TB
Sep  5 16:02:07 ####### systemd[1]: Starting LSB: Postfix Mail Transport Agent...
Sep  5 16:02:07 ####### smartd[2915]: Device: /dev/sdc [SAT], found in smartd database: Toshiba 3.5" DT01ACA... Desktop HDD
Sep  5 16:02:07 ####### postfix[3378]:  * Starting Postfix Mail Transport Agent postfix
Sep  5 16:02:07 ####### apache2[3158]: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message
Sep  5 16:02:07 ####### org.a11y.atspi.Registry[3434]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Sep  5 16:02:07 ####### dbus[3008]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Sep  5 16:02:07 ####### postfix[3555]: Postfix is running with backwards-compatible default settings
Sep  5 16:02:07 ####### postfix[3555]: See http://www.postfix.org/COMPATIBILITY_README.html for details
Sep  5 16:02:07 ####### systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Sep  5 16:02:07 ####### postfix[3555]: To disable backwards compatibility use "postconf compatibility_level=2" and "postfix reload"
Sep  5 16:02:07 ####### dbus[3008]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Sep  5 16:02:07 ####### systemd[1]: Started RealtimeKit Scheduling Policy Service.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Successfully called chroot.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Successfully dropped privileges.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Successfully limited resources.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Running.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Watchdog thread running.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Canary thread running.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Successfully made thread 3552 of process 3552 (n/a) owned by '108' high priority at nice level -11.
Sep  5 16:02:07 ####### rtkit-daemon[3553]: Supervising 1 threads of 1 processes of 1 users.
Sep  5 16:02:07 ####### postfix[3378]:    ...done.
Sep  5 16:02:07 ####### systemd[1]: Started LSB: Postfix Mail Transport Agent.
Sep  5 16:02:07 ####### systemd[1]: Reached target Mail Transport Agent.
Sep  5 16:02:07 ####### postfix/master[3606]: daemon started -- version 3.1.0, configuration /etc/postfix
Sep  5 16:02:08 ####### apache2[3158]:  *
Sep  5 16:02:08 ####### systemd[1]: Started LSB: Apache2 web server.
Sep  5 16:02:08 ####### systemd[1]: Reached target Multi-User System.
Sep  5 16:02:08 ####### systemd[1]: Reached target Graphical Interface.
Sep  5 16:02:08 ####### systemd[1]: Starting Update UTMP about System Runlevel Changes...
Sep  5 16:02:08 ####### systemd[1]: Started Stop ureadahead data collection 45s after completed startup.
Sep  5 16:02:08 ####### systemd[1]: Started Update UTMP about System Runlevel Changes.
Sep  5 16:02:08 ####### smartd[2915]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
Sep  5 16:02:08 ####### smartd[2915]: Device: /dev/sdc [SAT], state read from /var/lib/smartmontools/smartd.TOSHIBA_DT01ACA100-64E1ANPNS.ata.state
Sep  5 16:02:08 ####### smartd[2915]: Monitoring 3 ATA and 0 SCSI devices
Sep  5 16:02:08 ####### smartd[2915]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 66 to 67
Sep  5 16:02:08 ####### smartd[2915]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Sep  5 16:02:08 ####### ModemManager[3023]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
Sep  5 16:02:08 ####### ModemManager[3023]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.7/0000:03:00.0': not supported by any plugin
Sep  5 16:02:09 ####### smartd[2915]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Sep  5 16:02:09 ####### rtkit-daemon[3553]: Supervising 1 threads of 1 processes of 1 users.
Sep  5 16:02:09 ####### rtkit-daemon[3553]: Successfully made thread 3616 of process 3552 (n/a) owned by '108' RT at priority 5.
Sep  5 16:02:09 ####### rtkit-daemon[3553]: Supervising 2 threads of 1 processes of 1 users.
Sep  5 16:02:09 ####### smartd[2915]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.Samsung_SSD_840_EVO_250GB-S1DBNSBF374755V.ata.state
Sep  5 16:02:09 ####### smartd[2915]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HDS721032CLA362-JP1421HN15D0HC.ata.state
Sep  5 16:02:09 ####### smartd[2915]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.TOSHIBA_DT01ACA100-64E1ANPNS.ata.state
Sep  5 16:02:10 ####### rtkit-daemon[3553]: Supervising 2 threads of 1 processes of 1 users.
Sep  5 16:02:10 ####### rtkit-daemon[3553]: Successfully made thread 3617 of process 3552 (n/a) owned by '108' RT at priority 5.
Sep  5 16:02:10 ####### rtkit-daemon[3553]: Supervising 3 threads of 1 processes of 1 users.
Sep  5 16:02:10 ####### rtkit-daemon[3553]: Supervising 3 threads of 1 processes of 1 users.
Sep  5 16:02:10 ####### rtkit-daemon[3553]: Successfully made thread 3618 of process 3552 (n/a) owned by '108' RT at priority 5.
Sep  5 16:02:10 ####### rtkit-daemon[3553]: Supervising 4 threads of 1 processes of 1 users.
Sep  5 16:02:11 ####### kernel: [   11.236201] usblp1: removed
Sep  5 16:02:11 ####### kernel: [   11.258296] usblp 3-6.3:1.0: usblp1: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
Sep  5 16:02:11 ####### /hpfax: [3627]: error: Failed to create /var/spool/cups/tmp/.hplip
Sep  5 16:02:11 ####### freshclam[3017]: ClamAV update process started at Mon Sep  5 16:02:11 2016
Sep  5 16:02:11 ####### freshclam[3017]: WARNING: Can't query current.cvd.clamav.net
Sep  5 16:02:11 ####### freshclam[3017]: WARNING: Invalid DNS reply. Falling back to HTTP mode.
Sep  5 16:02:11 ####### freshclam[3017]: Reading CVD header (main.cvd): WARNING: Can't get information about db.local.clamav.net: Temporary failure in name resolution
Sep  5 16:02:11 ####### freshclam[3017]: WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Sep  5 16:02:11 ####### freshclam[3017]: Trying again in 5 secs...
Sep  5 16:02:11 ####### udev-configure-printer[2997]: URI contains USB serial number
Sep  5 16:02:11 ####### udev-configure-printer[2997]: URI match: usb://Canon/i850?serial=100YMA
Sep  5 16:02:11 ####### udev-configure-printer[2997]: URI of detected printer: usb://Canon/i850?serial=100YMA, normalized: canon i850 serial 100yma
Sep  5 16:02:11 ####### udev-configure-printer[2997]: URI of print queue: usb://Canon/i850?serial=100YMA, normalized: canon i850 serial 100yma
Sep  5 16:02:11 ####### udev-configure-printer[2997]: Queue ipp://localhost/printers/i850 has matching device URI
Sep  5 16:02:11 ####### systemd[1]: Started Automatic USB/Bluetooth printer setup (-devices-pci0000:00-0000:00:14.0-usb3-3\x2d6-3\x2d6.3).
Sep  5 16:02:11 ####### systemd[1]: Startup finished in 2.722s (kernel) + 8.664s (userspace) = 11.386s.
Sep  5 16:02:12 ####### kernel: [   12.252343] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
Sep  5 16:02:13 ####### org.gtk.vfs.Daemon[3401]: A connection to the bus can't be made
Sep  5 16:02:13 ####### systemd[1]: Created slice User Slice of bienvenue.
Sep  5 16:02:13 ####### systemd[1]: Started Session c2 of user bienvenue.
Sep  5 16:02:13 ####### systemd[1]: Starting User Manager for UID 1000...
Sep  5 16:02:13 ####### systemd[3685]: Reached target Sockets.
Sep  5 16:02:13 ####### systemd[3685]: Reached target Timers.
Sep  5 16:02:13 ####### systemd[3685]: Reached target Paths.
Sep  5 16:02:13 ####### systemd[3685]: Reached target Basic System.
Sep  5 16:02:13 ####### systemd[3685]: Reached target Default.
Sep  5 16:02:13 ####### systemd[3685]: Startup finished in 12ms.
Sep  5 16:02:13 ####### systemd[1]: Started User Manager for UID 1000.
Sep  5 16:02:13 ####### org.a11y.Bus[3765]: ** (process:3847): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Sep  5 16:02:13 ####### org.a11y.Bus[3765]: Activating service name='org.a11y.atspi.Registry'
Sep  5 16:02:13 ####### org.a11y.Bus[3765]: Successfully activated service 'org.a11y.atspi.Registry'
Sep  5 16:02:13 ####### org.a11y.atspi.Registry[3864]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Sep  5 16:02:14 ####### dbus[3008]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Sep  5 16:02:14 ####### systemd[1]: Starting Disk Manager...
Sep  5 16:02:14 ####### udisksd[3980]: udisks daemon version 2.1.7 starting
Sep  5 16:02:14 ####### dbus[3008]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Sep  5 16:02:14 ####### systemd[1]: Started Disk Manager.
Sep  5 16:02:14 ####### udisksd[3980]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Sep  5 16:02:14 ####### dbus[3008]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Sep  5 16:02:14 ####### systemd[1]: Starting Daemon for power management...
Sep  5 16:02:14 ####### rtkit-daemon[3553]: Successfully made thread 4028 of process 4028 (n/a) owned by '1000' high priority at nice level -11.
Sep  5 16:02:14 ####### rtkit-daemon[3553]: Supervising 5 threads of 2 processes of 2 users.
Sep  5 16:02:14 ####### dhclient[4072]: Internet Systems Consortium DHCP Client 4.3.3
Sep  5 16:02:14 ####### dhclient[4072]: Copyright 2004-2015 Internet Systems Consortium.
Sep  5 16:02:14 ####### dhclient[4072]: All rights reserved.
Sep  5 16:02:14 ####### dhclient[4072]: For info, please visit https://www.isc.org/software/dhcp/
Sep  5 16:02:14 ####### dhclient[4072]:
Sep  5 16:02:14 ####### dhclient[4072]: Listening on LPF/wlp3s0/##:##:##:##:##:##
Sep  5 16:02:14 ####### dhclient[4072]: Sending on   LPF/wlp3s0/##:##:##:##:##:##
Sep  5 16:02:14 ####### dhclient[4072]: Sending on   Socket/fallback
Sep  5 16:02:15 ####### dhclient[4072]: DHCPRELEASE on wlp3s0 to 192.168.1.254 port 67 (xid=0x794c14ea)
Sep  5 16:02:15 ####### dhclient[4072]: send_packet: Network is unreachable
Sep  5 16:02:15 ####### dhclient[4072]: send_packet: please consult README file regarding broadcast address.
Sep  5 16:02:15 ####### dhclient[4072]: dhclient.c:2474: Failed to send 300 byte long packet over fallback interface.
Sep  5 16:02:15 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Sep  5 16:02:15 ####### kernel: [   15.268388] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Sep  5 16:02:15 ####### dhclient[4133]: Internet Systems Consortium DHCP Client 4.3.3
Sep  5 16:02:15 ####### dhclient[4133]: Copyright 2004-2015 Internet Systems Consortium.
Sep  5 16:02:15 ####### dhclient[4133]: All rights reserved.
Sep  5 16:02:15 ####### dhclient[4133]: For info, please visit https://www.isc.org/software/dhcp/
Sep  5 16:02:15 ####### dhclient[4133]:
Sep  5 16:02:15 ####### dhclient[4133]: Listening on LPF/enp0s25/##:##:##:##:##:##
Sep  5 16:02:15 ####### dhclient[4133]: Sending on   LPF/enp0s25/##:##:##:##:##:##
Sep  5 16:02:15 ####### dhclient[4133]: Sending on   Socket/fallback
Sep  5 16:02:15 ####### kernel: [   15.487204] e1000e: enp0s25 NIC Link is Down
Sep  5 16:02:15 ####### dbus[3008]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Sep  5 16:02:15 ####### kernel: [   15.724266] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
Sep  5 16:02:15 ####### org.gtk.vfs.AfcVolumeMonitor[3765]: Volume monitor alive
Sep  5 16:02:15 ####### dhclient[4231]: Internet Systems Consortium DHCP Client 4.3.3
Sep  5 16:02:15 ####### dhclient[4231]: Copyright 2004-2015 Internet Systems Consortium.
Sep  5 16:02:15 ####### dhclient[4231]: All rights reserved.
Sep  5 16:02:15 ####### dhclient[4231]: For info, please visit https://www.isc.org/software/dhcp/
Sep  5 16:02:15 ####### dhclient[4231]:
Sep  5 16:02:15 ####### dhclient[4231]: Listening on LPF/wlp3s0/##:##:##:##:##:##
Sep  5 16:02:15 ####### dhclient[4231]: Sending on   LPF/wlp3s0/##:##:##:##:##:##
Sep  5 16:02:15 ####### dhclient[4231]: Sending on   Socket/fallback
Sep  5 16:02:15 ####### dhclient[4231]: DHCPRELEASE on wlp3s0 to 192.168.1.254 port 67 (xid=0x2504b852)
Sep  5 16:02:15 ####### dhclient[4231]: send_packet: Network is unreachable
Sep  5 16:02:15 ####### dhclient[4231]: send_packet: please consult README file regarding broadcast address.
Sep  5 16:02:15 ####### dhclient[4231]: dhclient.c:2474: Failed to send 300 byte long packet over fallback interface.
Sep  5 16:02:15 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Sep  5 16:02:15 ####### kernel: [   15.858185] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Sep  5 16:02:16 ####### freshclam[3017]: ClamAV update process started at Mon Sep  5 16:02:16 2016
Sep  5 16:02:16 ####### freshclam[3017]: WARNING: Can't query current.cvd.clamav.net
Sep  5 16:02:16 ####### freshclam[3017]: WARNING: Invalid DNS reply. Falling back to HTTP mode.
Sep  5 16:02:16 ####### freshclam[3017]: Reading CVD header (main.cvd): WARNING: Can't get information about db.local.clamav.net: Temporary failure in name resolution
Sep  5 16:02:16 ####### freshclam[3017]: WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Sep  5 16:02:16 ####### freshclam[3017]: Trying again in 5 secs...
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 5 threads of 2 processes of 2 users.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Successfully made thread 4279 of process 4028 (n/a) owned by '1000' RT at priority 5.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 6 threads of 2 processes of 2 users.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 6 threads of 2 processes of 2 users.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Successfully made thread 4299 of process 4028 (n/a) owned by '1000' RT at priority 5.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 7 threads of 2 processes of 2 users.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 7 threads of 2 processes of 2 users.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Successfully made thread 4301 of process 4028 (n/a) owned by '1000' RT at priority 5.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 8 threads of 2 processes of 2 users.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Successfully made thread 4303 of process 4303 (n/a) owned by '1000' high priority at nice level -11.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 9 threads of 3 processes of 2 users.
Sep  5 16:02:16 ####### pulseaudio[4303]: [pulseaudio] pid.c: Daemon already running.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Successfully made thread 4305 of process 4305 (n/a) owned by '1000' high priority at nice level -11.
Sep  5 16:02:16 ####### rtkit-daemon[3553]: Supervising 10 threads of 4 processes of 2 users.
Sep  5 16:02:16 ####### pulseaudio[4305]: [pulseaudio] pid.c: Daemon already running.
Sep  5 16:02:17 ####### dbus[3008]: [system] Successfully activated service 'org.freedesktop.UPower'
Sep  5 16:02:17 ####### systemd[1]: Started Daemon for power management.
Sep  5 16:02:18 ####### kernel: [   18.808311] wlp3s0: authenticate with ##:##:##:##:##:##
Sep  5 16:02:18 ####### kernel: [   18.833476] wlp3s0: send auth to ##:##:##:##:##:## (try 1/3)
Sep  5 16:02:18 ####### kernel: [   18.835194] wlp3s0: authenticated
Sep  5 16:02:18 ####### kernel: [   18.836062] wlp3s0: associate with ##:##:##:##:##:## (try 1/3)
Sep  5 16:02:18 ####### kernel: [   18.844967] wlp3s0: RX AssocResp from ##:##:##:##:##:## (capab=0x411 status=0 aid=1)
Sep  5 16:02:18 ####### kernel: [   18.845099] wlp3s0: associated
Sep  5 16:02:18 ####### kernel: [   18.845106] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Sep  5 16:02:20 ####### avahi-daemon[2996]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fe80::ea94:f6ff:fe3f:c7ac.
Sep  5 16:02:20 ####### avahi-daemon[2996]: New relevant interface wlp3s0.IPv6 for mDNS.
Sep  5 16:02:20 ####### avahi-daemon[2996]: Registering new address record for fe80::ea94:f6ff:fe3f:c7ac on wlp3s0.*.
Sep  5 16:02:21 ####### freshclam[3017]: ClamAV update process started at Mon Sep  5 16:02:21 2016
Sep  5 16:02:21 ####### freshclam[3017]: WARNING: Can't query current.cvd.clamav.net
Sep  5 16:02:21 ####### freshclam[3017]: WARNING: Invalid DNS reply. Falling back to HTTP mode.
Sep  5 16:02:21 ####### freshclam[3017]: Reading CVD header (main.cvd): WARNING: Can't get information about db.local.clamav.net: Temporary failure in name resolution
Sep  5 16:02:21 ####### freshclam[3017]: WARNING: Can't read main.cvd header from db.local.clamav.net (IP: )
Sep  5 16:02:21 ####### freshclam[3017]: Trying again in 5 secs...
Sep  5 16:02:22 ####### dhclient[4472]: Internet Systems Consortium DHCP Client 4.3.3
Sep  5 16:02:22 ####### dhclient[4472]: Copyright 2004-2015 Internet Systems Consortium.
Sep  5 16:02:22 ####### dhclient[4472]: All rights reserved.
Sep  5 16:02:22 ####### dhclient[4472]: For info, please visit https://www.isc.org/software/dhcp/
Sep  5 16:02:22 ####### dhclient[4472]:
Sep  5 16:02:22 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Sep  5 16:02:22 ####### kernel: [   23.036418] audit_printk_skb: 96 callbacks suppressed
Sep  5 16:02:22 ####### kernel: [   23.036422] audit: type=1400 audit(1473084142.856:44): apparmor="DENIED" operation="open" profile="/sbin/dhclient" name="/var/lib/wicd/dhclient.conf" pid=4472 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Sep  5 16:02:22 ####### dhclient[4472]: Listening on LPF/wlp3s0/##:##:##:##:##:##
Sep  5 16:02:22 ####### dhclient[4472]: Sending on   LPF/wlp3s0/##:##:##:##:##:##
Sep  5 16:02:22 ####### dhclient[4472]: Sending on   Socket/fallback
Sep  5 16:02:22 ####### dhclient[4472]: DHCPDISCOVER on wlp3s0 to 255.255.255.255 port 67 interval 3 (xid=0x91966855)
Sep  5 16:02:22 ####### dhclient[4472]: DHCPREQUEST of 192.168.1.1 on wlp3s0 to 255.255.255.255 port 67 (xid=0x55689691)
Sep  5 16:02:22 ####### dhclient[4472]: DHCPOFFER of 192.168.1.1 from 192.168.1.254
Sep  5 16:02:22 ####### dhclient[4472]: DHCPACK of 192.168.1.1 from 192.168.1.254
Sep  5 16:02:22 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Sep  5 16:02:22 ####### avahi-daemon[2996]: Joining mDNS multicast group on interface wlp3s0.IPv4 with address 192.168.1.1.
Sep  5 16:02:22 ####### avahi-daemon[2996]: New relevant interface wlp3s0.IPv4 for mDNS.
Sep  5 16:02:22 ####### avahi-daemon[2996]: Registering new address record for 192.168.1.1 on wlp3s0.IPv4.
Sep  5 16:02:22 ####### whoopsie[3019]: [16:02:22] Cannot reach: https://daisy.ubuntu.com
Sep  5 16:02:22 ####### whoopsie[3019]: [16:02:22] offline
Sep  5 16:02:23 ####### systemd[1]: Reloading LSB: Postfix Mail Transport Agent.
Sep  5 16:02:23 ####### postfix[4542]:  * Reloading Postfix configuration...
Sep  5 16:02:23 ####### postfix[4547]: Postfix is running with backwards-compatible default settings
Sep  5 16:02:23 ####### postfix[4547]: See http://www.postfix.org/COMPATIBILITY_README.html for details
Sep  5 16:02:23 ####### postfix[4547]: To disable backwards compatibility use "postconf compatibility_level=2" and "postfix reload"
Sep  5 16:02:23 ####### postfix/master[3606]: reload -- version 3.1.0, configuration /etc/postfix
Sep  5 16:02:23 ####### postfix[4542]:    ...done.
Sep  5 16:02:23 ####### systemd[1]: Reloaded LSB: Postfix Mail Transport Agent.
Sep  5 16:02:23 ####### dhclient[4472]: bound to 192.168.1.1 -- renewal in 425586 seconds.
Sep  5 16:02:26 ####### freshclam[3017]: ClamAV update process started at Mon Sep  5 16:02:26 2016
Sep  5 16:02:26 ####### freshclam[3017]: WARNING: Your ClamAV installation is OUTDATED!
Sep  5 16:02:26 ####### freshclam[3017]: WARNING: Local version: 0.99 Recommended version: 0.99.2
Sep  5 16:02:26 ####### freshclam[3017]: DON'T PANIC! Read http://www.clamav.net/support/faq
Sep  5 16:02:26 ####### freshclam[3017]: main.cvd is up to date (version: 57, sigs: 4218790, f-level: 60, builder: amishhammer)
Sep  5 16:02:26 ####### freshclam[3017]: daily.cld is up to date (version: 22190, sigs: 589277, f-level: 63, builder: neo)
Sep  5 16:02:26 ####### freshclam[3017]: bytecode.cvd is up to date (version: 283, sigs: 53, f-level: 63, builder: neo)
Sep  5 16:02:35 ####### systemd[3685]: Time has been changed
Sep  5 16:02:35 ####### systemd[3370]: Time has been changed
Sep  5 16:02:35 ####### systemd-timesyncd[2769]: Synchronized to time server 91.189.89.198:123 (ntp.ubuntu.com).
Sep  5 16:02:35 ####### systemd[1]: Time has been changed
Sep  5 16:02:35 ####### systemd[1]: apt-daily.timer: Adding 6h 23min 57.238984s random time.
Sep  5 16:02:35 ####### systemd[1]: snapd.refresh.timer: Adding 1h 36min 25.358577s random time.
Sep  5 16:02:35 ####### systemd[1]: snapd.refresh.timer: Adding 2h 11min 51.721664s random time.
Sep  5 16:02:40 ####### dbus[3008]: [system] Activating service name='org.blueman.Mechanism' (using servicehelper)
Sep  5 16:02:40 ####### dbus[3008]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Sep  5 16:02:40 ####### obexd[4643]: OBEX daemon 5.37
Sep  5 16:02:40 ####### org.blueman.Mechanism[3008]: Failed to connect to Mir: Failed to connect to server socket: No such file or directory
Sep  5 16:02:40 ####### org.blueman.Mechanism[3008]: Unable to init server: Could not connect: Connection refused
Sep  5 16:02:40 ####### org.blueman.Mechanism[3008]: Failed to connect to Mir: Failed to connect to server socket: No such file or directory
Sep  5 16:02:40 ####### org.blueman.Mechanism[3008]: Unable to init server: Could not connect: Connection refused
Sep  5 16:02:40 ####### blueman-mechanism: Starting blueman-mechanism
Sep  5 16:02:40 ####### dbus[3008]: [system] Successfully activated service 'org.blueman.Mechanism'
Sep  5 16:02:40 ####### org.blueman.Mechanism[3008]: (blueman-mechanism:4640): Gtk-CRITICAL **: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
Sep  5 16:02:40 ####### blueman-mechanism: loading Rfcomm
Sep  5 16:02:40 ####### blueman-mechanism: loading RfKill
Sep  5 16:02:40 ####### blueman-mechanism: loading Ppp
Sep  5 16:02:40 ####### blueman-mechanism: loading Network
Sep  5 16:02:53 ####### systemd[1]: Starting Stop ureadahead data collection...
Sep  5 16:02:53 ####### systemd[1]: Stopped Read required files in advance.
Sep  5 16:02:53 ####### systemd[1]: Started Stop ureadahead data collection.



Merci pour toute l'aide que vous serez en mesure de m'apporter

Je pense à un problème de chaleur vue le manque de trous pour le passage de l'air avec de ventiler la carte graphique
Je pense aussi à un problème de pilote, j'ai prit le pilote livré avec xubuntu et d'habitude j'installe le pilote propriétaire linux de NVIDIA

Ma carte graphique est une NVIDIA GeForce GTX 750

Dernière modification par Philanthrope (16-10-2016 13:55:45)


La présent est un passé en évolution

Hors ligne

#22 06-09-2016 18:19:30

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Personne pour mon problème de reboot aléatoire devenu plus rare mais toujours présent ? roll

Mise à jours du Mardi 20 septembre 2016 :
Je n'ai pas encore changé le pilote de la carte graphique (remplacement du pilote d'Ubuntu par celui propriétaire) par contre j'ai fait le nettoyage du microprocesseur ainsi que de la partie inférieur du radiateur (le reste avait déjà été fait)
tout semble fonctionner normalement, mais je vais voir ce que ça donne

Mise à jours du Mardi 26 septembre 2016 :
J'ai procédé au changement du pilote de ma carte graphique de ma carte NVIDIA GeForce , j'ai remplacé le pilote libre "xserveur-xorg" par le pilote propriétaire NVIDIA binary driver Version 361.42 (celle-ci était déjà proposé, il n'y avait qu'à cocher et valider
Je n'ai plus aucun problème, l'ordinateur ne redémarre plus inopinément

Affaire Réglée

Dernière modification par Philanthrope (16-10-2016 13:40:02)


La présent est un passé en évolution

Hors ligne

#23 26-09-2016 18:13:59

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Bonjour,

Je viens de résoudre mon problème d'ordinateur qui s'éteint et se ralume en faisant la procédure décrite plus haut

Mon problème est donc résolu

Merci à ceux et celles qui se sont penchés sur mon problème même si malheureusement, ils n'ont pas put m'aider d'avantage

Dernière modification par Philanthrope (16-10-2016 13:39:21)


La présent est un passé en évolution

Hors ligne

#24 16-10-2016 13:52:57

Philanthrope
Membre
Lieu : Quelques part chez les Ch'tis
Distrib. : Xubuntu 16.04.2 LTS / Debian 8 Jessy
Noyau : Linux 4.4.0-31-generic / Linux 3.16.0-4-amd64
(G)UI : xfce / xfce
Inscription : 26-05-2016

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Bonjour,

En cherchant un  peu, je me suis aperçus que la température dans le PC jouait un grand rôle dans la fermeture inopinée de mon PC

En ajoutant un ventilateur à l'arrière, il semble que les fermetures inopiné ce sont bien réduit

Ce pendant, aujourd'hui, après 3 jours où j'ai ajouté ce ventilateur, je me trouve, à nouveau avec une fermeture inopinée

mais cette fois-ci, le syslog me signale une erreur et la fermeture du PC

Voici les dernières lignes avant la fermeture à 12:49:08

Oct 16 12:47:08 ####### kernel: [   11.427629] NET: Registered protocol family 5
Oct 16 12:47:08 ####### systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
Oct 16 12:47:08 ####### kernel: [   11.448568] VBoxNetFlt: Successfully started.
Oct 16 12:47:08 ####### kernel: [   11.454429] VBoxNetAdp: Successfully started.
Oct 16 12:47:08 ####### kernel: [   11.456347] VBoxPciLinuxInit
Oct 16 12:47:08 ####### kernel: [   11.470499] vboxpci: IOMMU not found (not registered)
Oct 16 12:47:08 ####### nvidia-persistenced: Started (1387)
Oct 16 12:47:08 ####### vboxdrv.sh[1031]: Starting VirtualBox kernel modules ...done.
Oct 16 12:47:08 ####### systemd[1]: Started VirtualBox Linux kernel module.
Oct 16 12:47:08 ####### kernel: [   11.477394] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Oct 16 12:47:08 ####### systemd[1]: Starting vboxautostart-service.service...
Oct 16 12:47:08 ####### systemd[1]: Starting vboxweb-service.service...
Oct 16 12:47:08 ####### systemd[1]: Starting vboxballoonctrl-service.service...
Oct 16 12:47:08 ####### systemd[1]: Started vboxweb-service.service.
Oct 16 12:47:08 ####### systemd[1]: Started vboxballoonctrl-service.service.
Oct 16 12:47:08 ####### systemd[1]: Started vboxautostart-service.service.
Oct 16 12:47:08 ####### kernel: [   11.840783] nvidia-modeset: Allocated GPU:0 (GPU-bf999fbb-0b9f-745c-d143-973951488f4a) @ PCI:0000:01:00.0
Oct 16 12:47:08 ####### acpid: client connected from 1326[0:0]
Oct 16 12:47:08 ####### acpid: 1 client rule loaded
Oct 16 12:47:08 ####### systemd[1]: Created slice User Slice of lightdm.
Oct 16 12:47:08 ####### systemd[1]: Started Session c1 of user lightdm.
Oct 16 12:47:08 ####### systemd[1]: Starting User Manager for UID 108...
Oct 16 12:47:08 ####### systemd[1444]: Reached target Sockets.
Oct 16 12:47:08 ####### systemd[1444]: Reached target Timers.
Oct 16 12:47:08 ####### systemd[1444]: Reached target Paths.
Oct 16 12:47:08 ####### systemd[1444]: Reached target Basic System.
Oct 16 12:47:08 ####### systemd[1444]: Reached target Default.
Oct 16 12:47:08 ####### systemd[1444]: Startup finished in 12ms.
Oct 16 12:47:08 ####### systemd[1]: Started User Manager for UID 108.
Oct 16 12:47:08 ####### org.a11y.atspi.Registry[1480]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Oct 16 12:47:09 ####### dbus[1119]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Oct 16 12:47:09 ####### systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Oct 16 12:47:09 ####### dbus[1119]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Oct 16 12:47:09 ####### systemd[1]: Started RealtimeKit Scheduling Policy Service.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Successfully called chroot.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Successfully dropped privileges.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Successfully limited resources.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Running.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Canary thread running.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Watchdog thread running.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Successfully made thread 1509 of process 1509 (n/a) owned by '108' high priority at nice level -11.
Oct 16 12:47:09 ####### rtkit-daemon[1510]: Supervising 1 threads of 1 processes of 1 users.
Oct 16 12:47:09 ####### systemd[1]: Started MySQL Community Server.
Oct 16 12:47:09 ####### systemd[1]: Starting LSB: Postfix Mail Transport Agent...
Oct 16 12:47:09 ####### postfix[1517]:  * Starting Postfix Mail Transport Agent postfix
Oct 16 12:47:09 ####### smartd[1081]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
Oct 16 12:47:09 ####### smartd[1081]: Device: /dev/sdb [SAT], state read from /var/lib/smartmontools/smartd.Hitachi_HDS721032CLA362-JP1421HN15D0HC.ata.state
Oct 16 12:47:09 ####### smartd[1081]: Device: /dev/sdc, type changed from 'scsi' to 'sat'
Oct 16 12:47:09 ####### smartd[1081]: Device: /dev/sdc [SAT], opened
Oct 16 12:47:09 ####### smartd[1081]: Device: /dev/sdc [SAT], TOSHIBA DT01ACA100, S/N:64E1ANPNS, WWN:5-000039-ffbc09c6a, FW:MS2OA750, 1.00 TB
Oct 16 12:47:09 ####### smartd[1081]: Device: /dev/sdc [SAT], found in smartd database: Toshiba 3.5" DT01ACA... Desktop HDD
Oct 16 12:47:09 ####### apache2[1251]: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message
Oct 16 12:47:09 ####### postfix[1625]: Postfix is running with backwards-compatible default settings
Oct 16 12:47:09 ####### postfix[1625]: See http://www.postfix.org/COMPATIBILITY_README.html for details
Oct 16 12:47:09 ####### postfix[1625]: To disable backwards compatibility use "postconf compatibility_level=2" and "postfix reload"
Oct 16 12:47:09 ####### postfix[1517]:    ...done.
Oct 16 12:47:09 ####### systemd[1]: Started LSB: Postfix Mail Transport Agent.
Oct 16 12:47:09 ####### systemd[1]: Reached target Mail Transport Agent.
Oct 16 12:47:09 ####### postfix/master[1677]: daemon started -- version 3.1.0, configuration /etc/postfix
Oct 16 12:47:10 ####### apache2[1251]:  *
Oct 16 12:47:10 ####### systemd[1]: Started LSB: Apache2 web server.
Oct 16 12:47:10 ####### systemd[1]: Reached target Multi-User System.
Oct 16 12:47:10 ####### systemd[1]: Starting Notify bootloader that boot was successful...
Oct 16 12:47:10 ####### systemd[1]: Reached target Graphical Interface.
Oct 16 12:47:10 ####### systemd[1]: Starting Update UTMP about System Runlevel Changes...
Oct 16 12:47:10 ####### systemd[1]: Started Stop ureadahead data collection 45s after completed startup.
Oct 16 12:47:10 ####### snap[1683]: Ignoring 'booted' on classic
Oct 16 12:47:10 ####### systemd[1]: Started Notify bootloader that boot was successful.
Oct 16 12:47:10 ####### systemd[1]: Started Update UTMP about System Runlevel Changes.
Oct 16 12:47:10 ####### smartd[1081]: Device: /dev/sdc [SAT], is SMART capable. Adding to "monitor" list.
Oct 16 12:47:10 ####### smartd[1081]: Device: /dev/sdc [SAT], state read from /var/lib/smartmontools/smartd.TOSHIBA_DT01ACA100-64E1ANPNS.ata.state
Oct 16 12:47:10 ####### smartd[1081]: Monitoring 3 ATA and 0 SCSI devices
Oct 16 12:47:10 ####### smartd[1081]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 72 to 73
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Supervising 1 threads of 1 processes of 1 users.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Successfully made thread 1693 of process 1509 (n/a) owned by '108' RT at priority 5.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Supervising 2 threads of 1 processes of 1 users.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Supervising 2 threads of 1 processes of 1 users.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Successfully made thread 1694 of process 1509 (n/a) owned by '108' RT at priority 5.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Supervising 3 threads of 1 processes of 1 users.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Supervising 3 threads of 1 processes of 1 users.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Successfully made thread 1695 of process 1509 (n/a) owned by '108' RT at priority 5.
Oct 16 12:47:10 ####### rtkit-daemon[1510]: Supervising 4 threads of 1 processes of 1 users.
Oct 16 12:47:10 ####### ModemManager[1115]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
Oct 16 12:47:10 ####### ModemManager[1115]: <info>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.7/0000:03:00.0': not supported by any plugin
Oct 16 12:47:11 ####### smartd[1081]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 200 to 206
Oct 16 12:47:11 ####### smartd[1081]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.Samsung_SSD_840_EVO_250GB-S1DBNSBF374755V.ata.state
Oct 16 12:47:11 ####### smartd[1081]: Device: /dev/sdb [SAT], state written to /var/lib/smartmontools/smartd.Hitachi_HDS721032CLA362-JP1421HN15D0HC.ata.state
Oct 16 12:47:11 ####### smartd[1081]: Device: /dev/sdc [SAT], state written to /var/lib/smartmontools/smartd.TOSHIBA_DT01ACA100-64E1ANPNS.ata.state
Oct 16 12:47:12 ####### kernel: [   16.137916] usblp1: removed
Oct 16 12:47:12 ####### kernel: [   16.156249] usblp 3-2.3:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1072
Oct 16 12:47:13 ####### /hpfax: [1706]: error: Failed to create /var/spool/cups/tmp/.hplip
Oct 16 12:47:13 ####### udev-configure-printer[1021]: URI contains USB serial number
Oct 16 12:47:13 ####### udev-configure-printer[1021]: URI match: usb://Canon/i850?serial=100YMA
Oct 16 12:47:13 ####### udev-configure-printer[1021]: URI of detected printer: usb://Canon/i850?serial=100YMA, normalized: canon i850 serial 100yma
Oct 16 12:47:13 ####### udev-configure-printer[1021]: URI of print queue: usb://Canon/i850?serial=100YMA, normalized: canon i850 serial 100yma
Oct 16 12:47:13 ####### udev-configure-printer[1021]: Queue ipp://localhost/printers/i850 has matching device URI
Oct 16 12:47:13 ####### systemd[1]: Started Automatic USB/Bluetooth printer setup (-devices-pci0000:00-0000:00:14.0-usb3-3\x2d2-3\x2d2.3).
Oct 16 12:47:13 ####### systemd[1]: Startup finished in 8.222s (kernel) + 8.051s (userspace) = 16.274s.
Oct 16 12:47:14 ####### kernel: [   17.255298] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
Oct 16 12:47:16 ####### dhclient[1745]: Internet Systems Consortium DHCP Client 4.3.3
Oct 16 12:47:16 ####### dhclient[1745]: Copyright 2004-2015 Internet Systems Consortium.
Oct 16 12:47:16 ####### dhclient[1745]: All rights reserved.
Oct 16 12:47:16 ####### dhclient[1745]: For info, please visit https://www.isc.org/software/dhcp/
Oct 16 12:47:16 ####### dhclient[1745]:
Oct 16 12:47:16 ####### dhclient[1745]: Listening on LPF/wlp3s0/e8:94:f6:3f:c7:ac
Oct 16 12:47:16 ####### dhclient[1745]: Sending on   LPF/wlp3s0/e8:94:f6:3f:c7:ac
Oct 16 12:47:16 ####### dhclient[1745]: Sending on   Socket/fallback
Oct 16 12:47:16 ####### dhclient[1745]: DHCPRELEASE on wlp3s0 to 192.168.1.254 port 67 (xid=0x7b84819f)
Oct 16 12:47:16 ####### dhclient[1745]: send_packet: Network is unreachable
Oct 16 12:47:16 ####### dhclient[1745]: send_packet: please consult README file regarding broadcast address.
Oct 16 12:47:16 ####### dhclient[1745]: dhclient.c:2474: Failed to send 300 byte long packet over fallback interface.
Oct 16 12:47:16 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Oct 16 12:47:16 ####### kernel: [   20.163043] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Oct 16 12:47:17 ####### dhclient[1786]: Internet Systems Consortium DHCP Client 4.3.3
Oct 16 12:47:17 ####### dhclient[1786]: Copyright 2004-2015 Internet Systems Consortium.
Oct 16 12:47:17 ####### dhclient[1786]: All rights reserved.
Oct 16 12:47:17 ####### dhclient[1786]: For info, please visit https://www.isc.org/software/dhcp/
Oct 16 12:47:17 ####### dhclient[1786]:
Oct 16 12:47:17 ####### dhclient[1786]: Listening on LPF/enp0s25/00:22:4d:aa:94:12
Oct 16 12:47:17 ####### dhclient[1786]: Sending on   LPF/enp0s25/00:22:4d:aa:94:12
Oct 16 12:47:17 ####### dhclient[1786]: Sending on   Socket/fallback
Oct 16 12:47:17 ####### kernel: [   20.357724] e1000e: enp0s25 NIC Link is Down
Oct 16 12:47:17 ####### kernel: [   20.599031] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
Oct 16 12:47:17 ####### dhclient[1810]: Internet Systems Consortium DHCP Client 4.3.3
Oct 16 12:47:17 ####### dhclient[1810]: Copyright 2004-2015 Internet Systems Consortium.
Oct 16 12:47:17 ####### dhclient[1810]: All rights reserved.
Oct 16 12:47:17 ####### dhclient[1810]: For info, please visit https://www.isc.org/software/dhcp/
Oct 16 12:47:17 ####### dhclient[1810]:
Oct 16 12:47:17 ####### dhclient[1810]: Listening on LPF/wlp3s0/e8:94:f6:3f:c7:ac
Oct 16 12:47:17 ####### dhclient[1810]: Sending on   LPF/wlp3s0/e8:94:f6:3f:c7:ac
Oct 16 12:47:17 ####### dhclient[1810]: Sending on   Socket/fallback
Oct 16 12:47:17 ####### dhclient[1810]: DHCPRELEASE on wlp3s0 to 192.168.1.254 port 67 (xid=0xe93b270)
Oct 16 12:47:17 ####### dhclient[1810]: send_packet: Network is unreachable
Oct 16 12:47:17 ####### dhclient[1810]: send_packet: please consult README file regarding broadcast address.
Oct 16 12:47:17 ####### dhclient[1810]: dhclient.c:2474: Failed to send 300 byte long packet over fallback interface.
Oct 16 12:47:17 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Oct 16 12:47:17 ####### kernel: [   20.707690] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Oct 16 12:47:20 ####### kernel: [   23.582850] wlp3s0: authenticate with f6:78:fb:d6:4e:94
Oct 16 12:47:20 ####### kernel: [   23.607989] wlp3s0: send auth to f6:78:fb:d6:4e:94 (try 1/3)
Oct 16 12:47:20 ####### kernel: [   23.613308] wlp3s0: authenticated
Oct 16 12:47:20 ####### kernel: [   23.614685] wlp3s0: associate with f6:78:fb:d6:4e:94 (try 1/3)
Oct 16 12:47:20 ####### kernel: [   23.623610] wlp3s0: RX AssocResp from f6:78:fb:d6:4e:94 (capab=0x411 status=0 aid=1)
Oct 16 12:47:20 ####### kernel: [   23.623707] wlp3s0: associated
Oct 16 12:47:20 ####### kernel: [   23.623713] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Oct 16 12:47:22 ####### avahi-daemon[1112]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fe80::ea94:f6ff:fe3f:c7ac.
Oct 16 12:47:22 ####### avahi-daemon[1112]: New relevant interface wlp3s0.IPv6 for mDNS.
Oct 16 12:47:22 ####### avahi-daemon[1112]: Registering new address record for fe80::ea94:f6ff:fe3f:c7ac on wlp3s0.*.
Oct 16 12:47:24 ####### dhclient[1883]: Internet Systems Consortium DHCP Client 4.3.3
Oct 16 12:47:24 ####### dhclient[1883]: Copyright 2004-2015 Internet Systems Consortium.
Oct 16 12:47:24 ####### dhclient[1883]: All rights reserved.
Oct 16 12:47:24 ####### dhclient[1883]: For info, please visit https://www.isc.org/software/dhcp/
Oct 16 12:47:24 ####### dhclient[1883]:
Oct 16 12:47:24 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Oct 16 12:47:24 ####### kernel: [   27.807605] audit_printk_skb: 96 callbacks suppressed
Oct 16 12:47:24 ####### kernel: [   27.807608] audit: type=1400 audit(1476614844.616:44): apparmor="DENIED" operation="open" profile="/sbin/dhclient" name="/var/lib/wicd/dhclient.conf" pid=1883 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Oct 16 12:47:24 ####### dhclient[1883]: Listening on LPF/wlp3s0/e8:94:f6:3f:c7:ac
Oct 16 12:47:24 ####### dhclient[1883]: Sending on   LPF/wlp3s0/e8:94:f6:3f:c7:ac
Oct 16 12:47:24 ####### dhclient[1883]: Sending on   Socket/fallback
Oct 16 12:47:24 ####### dhclient[1883]: DHCPDISCOVER on wlp3s0 to 255.255.255.255 port 67 interval 3 (xid=0x776ebd24)
Oct 16 12:47:24 ####### dhclient[1883]: DHCPREQUEST of 192.168.1.1 on wlp3s0 to 255.255.255.255 port 67 (xid=0x24bd6e77)
Oct 16 12:47:24 ####### dhclient[1883]: DHCPOFFER of 192.168.1.1 from 192.168.1.254
Oct 16 12:47:24 ####### dhclient[1883]: DHCPACK of 192.168.1.1 from 192.168.1.254
Oct 16 12:47:24 ####### root: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
Oct 16 12:47:24 ####### avahi-daemon[1112]: Joining mDNS multicast group on interface wlp3s0.IPv4 with address 192.168.1.1.
Oct 16 12:47:24 ####### avahi-daemon[1112]: New relevant interface wlp3s0.IPv4 for mDNS.
Oct 16 12:47:24 ####### avahi-daemon[1112]: Registering new address record for 192.168.1.1 on wlp3s0.IPv4.
Oct 16 12:47:24 ####### whoopsie[1013]: [12:47:24] Cannot reach: https://daisy.ubuntu.com
Oct 16 12:47:24 ####### whoopsie[1013]: [12:47:24] offline
Oct 16 12:47:24 ####### systemd[1]: Reloading LSB: Postfix Mail Transport Agent.
Oct 16 12:47:24 ####### postfix[1953]:  * Reloading Postfix configuration...
Oct 16 12:47:24 ####### postfix[1958]: Postfix is running with backwards-compatible default settings
Oct 16 12:47:24 ####### postfix[1958]: See http://www.postfix.org/COMPATIBILITY_README.html for details
Oct 16 12:47:24 ####### postfix[1958]: To disable backwards compatibility use "postconf compatibility_level=2" and "postfix reload"
Oct 16 12:47:24 ####### postfix/master[1677]: reload -- version 3.1.0, configuration /etc/postfix
Oct 16 12:47:24 ####### postfix[1953]:    ...done.
Oct 16 12:47:24 ####### systemd[1]: Reloaded LSB: Postfix Mail Transport Agent.
Oct 16 12:47:24 ####### dhclient[1883]: bound to 192.168.1.1 -- renewal in 388994 seconds.
Oct 16 12:47:43 ####### org.gtk.vfs.Daemon[1458]: A connection to the bus can't be made
Oct 16 12:47:43 ####### systemd[1]: Created slice User Slice of bienvenue.
Oct 16 12:47:43 ####### systemd[1]: Starting User Manager for UID 1000...
Oct 16 12:47:43 ####### systemd[1]: Started Session c2 of user bienvenue.
Oct 16 12:47:43 ####### systemd[2039]: Reached target Timers.
Oct 16 12:47:43 ####### systemd[2039]: Reached target Paths.
Oct 16 12:47:43 ####### systemd[2039]: Reached target Sockets.
Oct 16 12:47:43 ####### systemd[2039]: Reached target Basic System.
Oct 16 12:47:43 ####### systemd[2039]: Reached target Default.
Oct 16 12:47:43 ####### systemd[2039]: Startup finished in 12ms.
Oct 16 12:47:43 ####### systemd[1]: Started User Manager for UID 1000.
Oct 16 12:47:43 ####### org.a11y.Bus[2132]: ** (process:2248): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Oct 16 12:47:43 ####### org.a11y.Bus[2132]: Activating service name='org.a11y.atspi.Registry'
Oct 16 12:47:43 ####### org.a11y.Bus[2132]: Successfully activated service 'org.a11y.atspi.Registry'
Oct 16 12:47:43 ####### org.a11y.atspi.Registry[2277]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Oct 16 12:47:43 ####### rtkit-daemon[1510]: Successfully made thread 2302 of process 2302 (n/a) owned by '1000' high priority at nice level -11.
Oct 16 12:47:43 ####### rtkit-daemon[1510]: Supervising 5 threads of 2 processes of 2 users.
Oct 16 12:47:43 ####### dbus[1119]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Oct 16 12:47:43 ####### systemd[1]: Starting Disk Manager...
Oct 16 12:47:43 ####### udisksd[2338]: udisks daemon version 2.1.7 starting
Oct 16 12:47:43 ####### dbus[1119]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Oct 16 12:47:43 ####### systemd[1]: Starting Daemon for power management...
Oct 16 12:47:43 ####### org.freedesktop.Notifications[2132]: (xfce4-notifyd:2352): Gtk-WARNING **: Theme directory actions/64 of theme bruno-xfce has no size field
Oct 16 12:47:44 ####### dbus[1119]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Oct 16 12:47:44 ####### systemd[1]: Started Disk Manager.
Oct 16 12:47:44 ####### udisksd[2338]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Oct 16 12:47:44 ####### org.freedesktop.Notifications[2132]: (xfce4-notifyd:2352): Gtk-WARNING **: Theme directory status/64 of theme bruno-xfce has no size field
Oct 16 12:47:44 ####### dbus[1119]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 5 threads of 2 processes of 2 users.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Successfully made thread 2497 of process 2302 (n/a) owned by '1000' RT at priority 5.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 6 threads of 2 processes of 2 users.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 6 threads of 2 processes of 2 users.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Successfully made thread 2500 of process 2302 (n/a) owned by '1000' RT at priority 5.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 7 threads of 2 processes of 2 users.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 7 threads of 2 processes of 2 users.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Successfully made thread 2501 of process 2302 (n/a) owned by '1000' RT at priority 5.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 8 threads of 2 processes of 2 users.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Successfully made thread 2503 of process 2503 (n/a) owned by '1000' high priority at nice level -11.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 9 threads of 3 processes of 2 users.
Oct 16 12:47:45 ####### pulseaudio[2503]: [pulseaudio] pid.c: Daemon already running.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Successfully made thread 2507 of process 2507 (n/a) owned by '1000' high priority at nice level -11.
Oct 16 12:47:45 ####### rtkit-daemon[1510]: Supervising 9 threads of 3 processes of 2 users.
Oct 16 12:47:45 ####### pulseaudio[2507]: [pulseaudio] pid.c: Daemon already running.
Oct 16 12:47:46 ####### dbus[1119]: [system] Successfully activated service 'org.freedesktop.UPower'
Oct 16 12:47:46 ####### systemd[1]: Started Daemon for power management.
Oct 16 12:47:47 ####### systemd[1444]: Time has been changed
Oct 16 12:47:47 ####### systemd[2039]: Time has been changed
Oct 16 12:47:47 ####### systemd-timesyncd[889]: Synchronized to time server 91.189.89.199:123 (ntp.ubuntu.com).
Oct 16 12:47:47 ####### systemd[1]: Time has been changed
Oct 16 12:47:47 ####### systemd[1]: snapd.refresh.timer: Adding 1h 37min 42.196985s random time.
Oct 16 12:47:47 ####### systemd[1]: snapd.refresh.timer: Adding 1h 41min 16.753514s random time.
Oct 16 12:47:47 ####### systemd[1]: apt-daily.timer: Adding 7h 28min 1.373867s random time.
Oct 16 12:47:47 ####### systemd[1]: snapd.refresh.timer: Adding 5h 44min 58.560579s random time.
Oct 16 12:47:47 ####### systemd[1]: snapd.refresh.timer: Adding 3h 56min 6.808657s random time.
Oct 16 12:47:47 ####### org.gtk.vfs.AfcVolumeMonitor[2132]: Volume monitor alive
Oct 16 12:47:48 ####### org.freedesktop.thumbnails.Thumbnailer1[2132]: (tumblerd:2589): tumblerd-WARNING **: Failed to start the thumbnail cache service: Another thumbnail cache service is already running
Oct 16 12:47:54 ####### systemd[1]: Starting Stop ureadahead data collection...
Oct 16 12:47:54 ####### systemd[1]: Stopped Read required files in advance.
Oct 16 12:47:54 ####### systemd[1]: Started Stop ureadahead data collection.
Oct 16 12:48:09 ####### dbus[1119]: [system] Activating service name='org.blueman.Mechanism' (using servicehelper)
Oct 16 12:48:09 ####### dbus[1119]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 16 12:48:09 ####### obexd[2658]: OBEX daemon 5.37
Oct 16 12:48:09 ####### org.blueman.Mechanism[1119]: Failed to connect to Mir: Failed to connect to server socket: No such file or directory
Oct 16 12:48:09 ####### org.blueman.Mechanism[1119]: Unable to init server: Could not connect: Connection refused
Oct 16 12:48:09 ####### org.blueman.Mechanism[1119]: Failed to connect to Mir: Failed to connect to server socket: No such file or directory
Oct 16 12:48:09 ####### org.blueman.Mechanism[1119]: Unable to init server: Could not connect: Connection refused
Oct 16 12:48:09 ####### blueman-mechanism: Starting blueman-mechanism
Oct 16 12:48:09 ####### dbus[1119]: [system] Successfully activated service 'org.blueman.Mechanism'
Oct 16 12:48:09 ####### org.blueman.Mechanism[1119]: (blueman-mechanism:2654): Gtk-CRITICAL **: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
Oct 16 12:48:09 ####### blueman-mechanism: loading Rfcomm
Oct 16 12:48:09 ####### blueman-mechanism: loading RfKill
Oct 16 12:48:09 ####### blueman-mechanism: loading Ppp
Oct 16 12:48:09 ####### blueman-mechanism: loading Network
Oct 16 12:48:39 ####### blueman-mechanism: Exiting
Oct 16 12:49:08 ####### systemd[1]: Stopping User Manager for UID 108...
Oct 16 12:49:08 ####### systemd[1444]: Reached target Shutdown.
Oct 16 12:49:08 ####### systemd[1444]: Starting Exit the Session...
Oct 16 12:49:08 ####### systemd[1444]: Stopped target Default.
Oct 16 12:49:08 ####### systemd[1444]: Stopped target Basic System.
Oct 16 12:49:08 ####### systemd[1444]: Stopped target Timers.
Oct 16 12:49:08 ####### systemd[1444]: Stopped target Paths.
Oct 16 12:49:08 ####### systemd[1444]: Stopped target Sockets.
Oct 16 12:49:08 ####### systemd[1444]: Received SIGRTMIN+24 from PID 2735 (kill).
Oct 16 12:49:08 ####### systemd[1]: Stopped User Manager for UID 108.
Oct 16 12:49:08 ####### systemd[1]: Removed slice User Slice of lightdm.




Il semblerai qu'il y ait un problème avec blueman-mechanism et plus précisément 

Oct 16 12:48:09 cd214289 org.blueman.Mechanism[1119]: (blueman-mechanism:2654): Gtk-CRITICAL **: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed


Je ne sais trop quoi faire si non une réinstallation de Xubuntu mais j'aimerai l'éviter

Quelqu'un aurait-il une idée ?

Pour Informations :
Carte mère : Intel Corporation DH87RL
CPU : Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz
RAM : 20 Go
Carte Graphique : NVIDIA GeForce GTX 750
3 disque durs (1 SSD et de 2HDD)
Alimentation : 600 W 220 V

Afin d'éviter les demandes inutiles, je précise que :
- J'ai retiré la poussière de tous les ventilateurs
- J'ai retiré l'ancienne pâte thermique et j'ai nettoyé le processeur avec un essuie-tout et de l’alcool ménager
- J'ai retiré l'ancienne pâte thermique du ventilateur du processeur avec un essuie-tout et de l’alcool ménager
- J'ai retiré et ouvert l'alimentation afin de supprimer la poussière (avec un pinceau)
- J'ai fait en sorte de passer les cable de manière à ne pas empêcher la circulation de l'air

bash -c 'sensors ; hddtemp /dev/sda /dev/sdb /dev/sdc'


acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +105.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +37.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:         +37.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:         +31.0°C  (high = +80.0°C, crit = +100.0°C)

nct6683-isa-0a20
Adapter: ISA adapter
VIN0:           +0.99 V  
VIN1:           +1.01 V  
VCC:            +3.39 V  
VSB:            +3.30 V  
VIN14:          +1.15 V  
VIN3:           +1.04 V  
VIN7:           +1.01 V  
fan1:          1064 RPM
fan2:           754 RPM
fan3:           640 RPM
PECI 0.0:       +36.0°C  (high = +80.0°C, crit = +88.0°C)  sensor = Intel PECI
PCH CHIP:       +39.0°C  (high = +85.0°C, crit = +95.0°C)
Local:          +45.5°C  (high = +60.0°C, crit = +68.0°C)
Thermistor 15:  +31.5°C  (high = +70.0°C, crit = +78.0°C)  sensor = thermistor
Thermistor 16:  +35.5°C  (high = +80.0°C, crit = +88.0°C)  sensor = thermistor
DIMM 0:          +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
DIMM 1:          +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
DIMM 2:          +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
DIMM 3:          +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
Virtual 0:       +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
Virtual 1:       +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
Virtual 2:       +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
Virtual 3:       +0.0°C  (high =  +0.0°C, crit =  +0.0°C)
intrusion0:    OK
beep_enable:   disabled

/dev/sda: Samsung SSD 840 EVO 250G B              @: 29°C
/dev/sdb: Hitachi HDS721032CLA362: 30°C
/dev/sdc: TOSHIBA DT01ACA100: 30°C

Dernière modification par Philanthrope (16-10-2016 14:31:41)


La présent est un passé en évolution

Hors ligne

#25 28-10-2016 16:18:58

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : [Résolu] Reboot aléatoire voire quelques fois blocage

Bonjour


Blueman est un outil GTK+ de gestion de bluetooth pour GNOME utilisant le
dorsal D-Bus bluez.
 


tu a une interface bluetooth sur cette machine ?

a tu testé une bonne débian bien robuste wink , une stretch par exemple sur un disque a part , il s'agit peut etre d'un probleme  logiciel.
je sais pas quelle utilisation tu a exactement de cette machine et ce que tu utilise comme programmes .

Hors ligne

Pied de page des forums