Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 27-09-2016 22:09:23

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

[Résolu] logiciels lecture/enregistrement vhs

bonjour , j'ai un magnétoscope 6 têtes avec une carte d'acquisition hauppauge wintv hvr 1120

gràce a kaffeine , j'ai la tv sous linux
grâce à xawtv , je sais maintenant que la carte de capture fonctionne

par contre xawtv n'enregistre pas

xdtv est mort

vlc , j'ai jamais réussi à le paramétrer

openshot : aveugle et sourd

kdenlive fonctionnait au départ mais est vite devenu aveugle et sourd

en somme , je suis au bout de mes peines et aucune solution

je désespère , d'autant plus que kdenlive et openshot ne supportent que le pal et le ntsc

problème : et le sécam ?

Dernière modification par debian-alain (30-09-2016 13:09:57)

Hors ligne

#2 27-09-2016 22:26:37

otyugh
Membre
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

Moi j'utilise xdtv sans problème. J'utilise n'importe quel magnetoscope et j'ai un convertisseur un peu à la con qui fait le job "Terratec G1" pour une vingtaine d'euros ce me semble.

Agenda du libre : se faire dépanner/dépanner IRL ! Le libre n'est pas qu'un phénomène internet.
Framapad sur les balados : Emissions audio pro/amateur, votre radio sur-mesure !

Hors ligne

#3 27-09-2016 22:34:24

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-3-amd64
(G)UI : Mate 1.16
Inscription : 11-03-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

Re smile
D'après ce lien
https://doc.ubuntu-fr.org/xdtv
C'est xdtv qui semble mieux que xawtv et il est indiqué comment enregistrer.

En ligne

#4 27-09-2016 23:27:27

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

merci chalu pour ce lien .

malgré tout , chez moi , xdtv ne fonctionne pas non plus .

je me retrouve le bec dans l'eau

Hors ligne

#5 27-09-2016 23:50:52

otyugh
Membre
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

Sinon une station windows ? Si c'est juste pour numériser quelques cassettes, hein. Peut bien faire une entorse, s'pas le truc qu'on fait tous les jours.

Agenda du libre : se faire dépanner/dépanner IRL ! Le libre n'est pas qu'un phénomène internet.
Framapad sur les balados : Emissions audio pro/amateur, votre radio sur-mesure !

Hors ligne

#6 28-09-2016 00:42:22

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

oui otyugh , j'ai w10 et ma carte y est installée . elle y marche d'ailleurs très bien .

mais ce que je veux , c'est la faire marcher sous linux . me dites pas que c'est pas possible

j'arrive à faire tourner xdtv mais :

1) il faut sans cesse lui dire xdtv -c /dev/v4l/video1 pour qu'il démarre sur le magnétoscope

2) si je tape xdtv il démmarre puis s'éteind aussitôt

3) a verifier mais jusqu'ici , tous mes fichiers vidéos étaient vides

173566Capturedu20160928004428.png

soit environ 8 minutes . résultat : vide dès le départ ! ça fiche plutôt mal !

Dernière modification par debian-alain (28-09-2016 00:49:38)

Hors ligne

#7 28-09-2016 07:48:44

kawer
Adhérent(e)
Lieu : Quelque part vers Gallifrey
Distrib. : Debian 9 / ArchLinux / FreeBSD
Noyau : Current
(G)UI : gnome et xfce4
Inscription : 08-10-2013

Re : [Résolu] logiciels lecture/enregistrement vhs

Si xdtv n'est plus dans les dépôts Debian alors qu'il a été récemment releasé, c'est qu'il a des problèmes de fonctionnement avec jessie, le mieux serait de trouver une alternative disponible dans les dépôts debian officiel, bonne chance wink

Rendez à César ce qui est à César et à Dieu ce qui est à Dieu -Cit. J.C.
La persévérance, c'est ce qui rend l'impossible possible, le possible probable et le probable réalisé. -Cit. Robert Half.
Dans toutes les situations, le piège c'était avant, car tu ne voyais pas les murs -Cit. Crevette

Hors ligne

#8 28-09-2016 08:30:25

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-3-amd64
(G)UI : Mate 1.16
Inscription : 11-03-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

kdenlive fonctionnait au départ mais est vite devenu aveugle et sourd


il faut peut-être que tu cherches de ce côté ou de openshot qui sont dans les dépôts. KDEnlive a fonctionné combien de temps car je n'ai pas bien compris le déroulement ?

En ligne

#9 28-09-2016 09:32:06

dh
Membre
Lieu : Rhône
Distrib. : SID
Noyau : 4.2.0-1-amd64
(G)UI : Gnome3
Inscription : 23-03-2010

Re : [Résolu] logiciels lecture/enregistrement vhs

Le sujet date un peu (ne pas se fier à la date pour les anciens messages avant migration) mais sur debian-fr tu as ce T&A :
https://www.debian-fr.org/t/numerisatio … -vhs/61419

Libertaire, libéral, libre.

Hors ligne

#10 28-09-2016 09:56:24

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

kdenlive a fonctionné 5-10 min ,  chalu . après il est tombé en panne .

openshot : n'a jamais fonctionné et pour cause , dépend de kdenlive

xawtv marche sur une patte

xdtv un peu mieux mais me crée des fichiers vides

kaffeine : impec pour le tuner tv

vlc  inparametrable

je suis d'accord kawer , plutôt chercher dans les dépôts . mais sorti de kdenlive  et vlc , y a pas beaucoup de choix ....

Hors ligne

#11 28-09-2016 12:14:10

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

suivant le petit mot de dh , j'arrive à enregistrer avec vlc  mais :

c'est du bruit :
pas d'image et pas de son

Dernière modification par debian-alain (28-09-2016 12:20:50)

Hors ligne

#12 28-09-2016 12:21:39

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

qqun pour m'aider à paramétrer vlc ?

en attendant , j'ai trouvé la solution avec ffmpeg .

voilà ma commande :

Ffmpeg -f v4l2 -framerate 25 -video_size 640x480 -i /dev/video1 -f alsa  -i hw:4,0 output.avi

norme  utilisée v4l2 for linux

framerate 25 images par seconde (en france)

video_size  comme c'est une k7 vhs , donc vieille norme donc 640x480 lignes

entrée v4l2 /dev/video1

périphérique audio alsa

entree periph hw:4,0 (et non hw:4.0)

fichier de sortie output . avi

reste plus qu'à faire pareil avec vlc

Dernière modification par debian-alain (28-09-2016 16:32:31)

Hors ligne

#13 28-09-2016 19:21:10

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-3-amd64
(G)UI : Mate 1.16
Inscription : 11-03-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

debian-alain a écrit :


openshot : n'a jamais fonctionné et pour cause , dépend de kdenlive


Ah bon t'es sûr ? Je ne vois pas de références à KDEnlive pourtant

Edit : si tu arrives à enregistrer en ligne de commande, du coup ça te sort d'affaire et tu peux numériser tes cassettes VHS non ?

Dernière modification par chalu (28-09-2016 19:22:12)

En ligne

#14 28-09-2016 19:24:59

otyugh
Membre
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

Ils utilisent tous les deux melt, je vois que ça, comme ça.

Agenda du libre : se faire dépanner/dépanner IRL ! Le libre n'est pas qu'un phénomène internet.
Framapad sur les balados : Emissions audio pro/amateur, votre radio sur-mesure !

Hors ligne

#15 29-09-2016 00:00:20

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

merci otyugh . je savais pas .

par contre , à force d'utiliser kdenlive , j'ai encore fait planter v4l2-ctl

maintenant , je n'ai plus de video .

et la commande v4l2-ctl -w ne donne plus rien

voilà le log de xawtv

root@debian:/home/alain# xawtv
 



This is xawtv-3.103, running on Linux/x86_64 (3.16.0-4-amd64)
xinerama 0: 1920x1080+0+0
vid-open-auto: using analog TV device /dev/video1
WARNING: No DGA direct video mode for this display.
WARNING: couldn't find framebuffer base address, try manual
         configuration ("v4l-conf -a <addr>")
v4l2: WARNING: framebuffer base address mismatch
v4l2: me=(nil) v4l=(nil)
Alsa devices: cap: hw:4,0 (/dev/video1), out: default
root@debian:/home/alain#
 



voilà le log de  ffmpeg

root@debian:/home/alain# ffmpeg -f v4l2 -framerate 25 -video_size 640x480 -i /dev/video1 -f alsa  -i hw:4,0 output.avi
 



ffmpeg version 2.6.9 Copyright (c) 2000-2016 the FFmpeg developers
  built with gcc 4.9.2 (Debian 4.9.2-10)
  configuration: --prefix=/usr --extra-cflags='-g -O2 -fstack-protector-strong -Wformat -Werror=format-security ' --extra-ldflags='-Wl,-z,relro' --cc='ccache cc' --enable-shared --enable-libmp3lame --enable-gpl --enable-nonfree --enable-libvorbis --enable-pthreads --enable-libfaac --enable-libxvid --enable-postproc --enable-x11grab --enable-libgsm --enable-libtheora --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libx264 --enable-libspeex --enable-nonfree --disable-stripping --enable-libvpx --enable-libschroedinger --disable-encoder=libschroedinger --enable-version3 --enable-libopenjpeg --enable-librtmp --enable-avfilter --enable-libfreetype --enable-libvo-aacenc --disable-decoder=amrnb --enable-libvo-amrwbenc --enable-libaacplus --libdir=/usr/lib/x86_64-linux-gnu --disable-vda --enable-libbluray --enable-libcdio --enable-gnutls --enable-frei0r --enable-openssl --enable-libass --enable-libopus --enable-fontconfig --enable-libpulse --disable-mips32r2 --disable-mipsdspr1 --disable-mipsdspr2 --enable-libvidstab --enable-libzvbi --enable-avresample --disable-htmlpages --disable-podpages --enable-libutvideo --enable-libfdk-aac --enable-libx265 --enable-libiec61883 --enable-vaapi --enable-libdc1394 --disable-altivec --shlibdir=/usr/lib/x86_64-linux-gnu
  libavutil      54. 20.100 / 54. 20.100
  libavcodec     56. 26.100 / 56. 26.100
  libavformat    56. 25.101 / 56. 25.101
  libavdevice    56.  4.100 / 56.  4.100
  libavfilter     5. 11.102 /  5. 11.102
  libavresample   2.  1.  0 /  2.  1.  0
  libswscale      3.  1.101 /  3.  1.101
  libswresample   1.  1.100 /  1.  1.100
  libpostproc    53.  3.100 / 53.  3.100
[video4linux2,v4l2 @ 0x18c5e40] The driver does not permit changing the time per frame
Input #0, video4linux2,v4l2, from '/dev/video1':
  Duration: N/A, start: 2425.093395, bitrate: 92160 kb/s
    Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 640x480, 92160 kb/s, 25 fps, 25 tbr, 1000k tbn, 1000k tbc
Guessed Channel Layout for  Input Stream #1.0 : stereo
Input #1, alsa, from 'hw:4,0':
  Duration: N/A, start: 1475098718.090530, bitrate: 1024 kb/s
    Stream #1:0: Audio: pcm_s16le, 32000 Hz, 2 channels, s16, 1024 kb/s
Output #0, avi, to 'output.avi':
  Metadata:
    ISFT            : Lavf56.25.101
    Stream #0:0: Video: mpeg4 (FMP4 / 0x34504D46), yuv420p, 640x480, q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
    Metadata:
      encoder         : Lavc56.26.100 mpeg4
    Stream #0:1: Audio: mp3 (libmp3lame) (U[0][0][0] / 0x0055), 32000 Hz, stereo, s16p
    Metadata:
      encoder         : Lavc56.26.100 libmp3lame
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg4 (native))
  Stream #1:0 -> #0:1 (pcm_s16le (native) -> mp3 (libmp3lame))
Press [q] to stop, [?] for help
[alsa @ 0x18c7a20] Thread message queue blocking; consider raising the thread_queue_size option (current value: 8)
frame=   10 fps=0.0 q=2.0 size=      23kB time=00:00:00.40 bitrate= 464.1kbits/sframe=   22 fps= 22 q=2.0 size=      37kB time=00:00:00.88 bitrate= 342.0kbits/sframe=   35 fps= 23 q=2.0 size=      52kB time=00:00:01.40 bitrate= 304.7kbits/sframe=   47 fps= 23 q=2.0 size=      67kB time=00:00:01.88 bitrate= 291.8kbits/sframe=   59 fps= 23 q=2.0 size=      81kB time=00:00:02.36 bitrate= 281.5kbits/sframe=   72 fps= 24 q=2.0 size=      96kB time=00:00:02.88 bitrate= 273.4kbits/sframe=   85 fps= 24 q=1.6 size=     111kB time=00:00:03.40 bitrate= 268.0kbits/sframe=   97 fps= 24 q=1.6 size=     125kB time=00:00:03.88 bitrate= 264.4kbits/sframe=  110 fps= 24 q=2.0 size=     145kB time=00:00:04.40 bitrate= 269.5kbits/sframe=  122 fps= 24 q=2.0 size=     160kB time=00:00:04.88 bitrate= 267.9kbits/sframe=  136 fps= 25 q=2.0 size=     176kB time=00:00:05.44 bitrate= 264.5kbits/sframe=  147 fps= 24 q=2.0 size=     189kB time=00:00:05.88 bitrate= 264.0kbits/sframe=  160 fps= 24 q=2.0 size=     205kB time=00:00:06.40 bitrate= 261.9kbits/sframe=  173 fps= 25 q=2.0 size=     220kB time=00:00:06.92 bitrate= 259.9kbits/sframe=  185 fps= 24 q=2.0 size=     234kB time=00:00:07.40 bitrate= 259.3kbits/sframe=  198 fps= 25 q=2.0 size=     249kB time=00:00:07.92 bitrate= 257.9kbits/sframe=  210 fps= 25 q=2.0 size=     264kB time=00:00:08.40 bitrate= 257.1kbits/sframe=  223 fps= 25 q=2.0 size=     278kB time=00:00:08.92 bitrate= 255.7kbits/sframe=  224 fps= 25 q=2.0 Lsize=     289kB time=00:00:09.07 bitrate= 260.6kbits/s    
video:161kB audio:107kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 7.852303%
Received signal 2: terminating.
root@debian:/home/alain#
 

Hors ligne

#16 29-09-2016 00:42:17

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

otyugh a écrit :

Ils utilisent tous les deux melt, je vois que ça, comme ça.




c'est quoi  ce bordel  . melt connais pas  . y pas ça sur le web

c'est pas plutot M L T  ?

Hors ligne

#17 29-09-2016 05:06:07

èfpé
Membre
Inscription : 10-07-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

Ben... y quand même ça dans les dépôts.

apt-cache rdepends melt


melt
Reverse Depends:
  openshot
  kdenlive


Sacré bordel de merdre n'est-il pas ?

Hors ligne

#18 29-09-2016 08:03:40

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-3-amd64
(G)UI : Mate 1.16
Inscription : 11-03-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

Mais que peut on lire ici ? wink
Il faut absolument être en root pour lancer la commande ffmpeg ? Si c'est non, ça me semble une mauvaise idée de se placer en root et d'enchaîner des commandes au terminal.

En ligne

#19 29-09-2016 08:49:11

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

j'ai fait une erreur chalu ?

quant à èfpé , je savais pas .

en attendant , j'ai perdu la video de v4l2-ctl

qqun pour m'aider ?

voilà le rapport de ffmpeg en tenant compte de la remarque de chalu :

alain@debian:~$ ffmpeg -f v4l2 -framerate 25 -video_size 640x480 -i /dev/video1 -f alsa  -i hw:4,0 output.avi
 



ffmpeg version 2.6.9 Copyright (c) 2000-2016 the FFmpeg developers
  built with gcc 4.9.2 (Debian 4.9.2-10)
  configuration: --prefix=/usr --extra-cflags='-g -O2 -fstack-protector-strong -Wformat -Werror=format-security ' --extra-ldflags='-Wl,-z,relro' --cc='ccache cc' --enable-shared --enable-libmp3lame --enable-gpl --enable-nonfree --enable-libvorbis --enable-pthreads --enable-libfaac --enable-libxvid --enable-postproc --enable-x11grab --enable-libgsm --enable-libtheora --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libx264 --enable-libspeex --enable-nonfree --disable-stripping --enable-libvpx --enable-libschroedinger --disable-encoder=libschroedinger --enable-version3 --enable-libopenjpeg --enable-librtmp --enable-avfilter --enable-libfreetype --enable-libvo-aacenc --disable-decoder=amrnb --enable-libvo-amrwbenc --enable-libaacplus --libdir=/usr/lib/x86_64-linux-gnu --disable-vda --enable-libbluray --enable-libcdio --enable-gnutls --enable-frei0r --enable-openssl --enable-libass --enable-libopus --enable-fontconfig --enable-libpulse --disable-mips32r2 --disable-mipsdspr1 --disable-mipsdspr2 --enable-libvidstab --enable-libzvbi --enable-avresample --disable-htmlpages --disable-podpages --enable-libutvideo --enable-libfdk-aac --enable-libx265 --enable-libiec61883 --enable-vaapi --enable-libdc1394 --disable-altivec --shlibdir=/usr/lib/x86_64-linux-gnu
  libavutil      54. 20.100 / 54. 20.100
  libavcodec     56. 26.100 / 56. 26.100
  libavformat    56. 25.101 / 56. 25.101
  libavdevice    56.  4.100 / 56.  4.100
  libavfilter     5. 11.102 /  5. 11.102
  libavresample   2.  1.  0 /  2.  1.  0
  libswscale      3.  1.101 /  3.  1.101
  libswresample   1.  1.100 /  1.  1.100
  libpostproc    53.  3.100 / 53.  3.100
[video4linux2,v4l2 @ 0x1b2ce40] The driver does not permit changing the time per frame
Input #0, video4linux2,v4l2, from '/dev/video1':
  Duration: N/A, start: 1516.766722, bitrate: 92160 kb/s
    Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 640x480, 92160 kb/s, 25 fps, 25 tbr, 1000k tbn, 1000k tbc
Guessed Channel Layout for  Input Stream #1.0 : stereo
Input #1, alsa, from 'hw:4,0':
  Duration: N/A, start: 1475132499.287129, bitrate: 1024 kb/s
    Stream #1:0: Audio: pcm_s16le, 32000 Hz, 2 channels, s16, 1024 kb/s
Output #0, avi, to 'output.avi':
  Metadata:
    ISFT            : Lavf56.25.101
    Stream #0:0: Video: mpeg4 (FMP4 / 0x34504D46), yuv420p, 640x480, q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc
    Metadata:
      encoder         : Lavc56.26.100 mpeg4
    Stream #0:1: Audio: mp3 (libmp3lame) (U[0][0][0] / 0x0055), 32000 Hz, stereo, s16p
    Metadata:
      encoder         : Lavc56.26.100 libmp3lame
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> mpeg4 (native))
  Stream #1:0 -> #0:1 (pcm_s16le (native) -> mp3 (libmp3lame))
Press [q] to stop, [?] for help
[alsa @ 0x1b2ea20] Thread message queue blocking; consider raising the thread_queue_size option (current value: 8)
frame=   10 fps=0.0 q=2.0 size=      25kB time=00:00:00.40 bitrate= 520.8kbits/sframe=   21 fps= 21 q=2.0 size=      43kB time=00:00:00.84 bitrate= 421.2kbits/sframe=   34 fps= 23 q=2.0 size=      63kB time=00:00:01.36 bitrate= 379.3kbits/sframe=   47 fps= 23 q=2.0 size=      83kB time=00:00:01.88 bitrate= 359.7kbits/sframe=   59 fps= 24 q=2.0 size=     102kB time=00:00:02.36 bitrate= 352.7kbits/sframe=   72 fps= 24 q=2.0 size=     121kB time=00:00:02.88 bitrate= 343.7kbits/sframe=   84 fps= 24 q=6.8 size=     330kB time=00:00:03.36 bitrate= 804.1kbits/sframe=   97 fps= 24 q=1.7 size=     344kB time=00:00:03.88 bitrate= 725.4kbits/sframe=  110 fps= 24 q=2.4 size=     364kB time=00:00:04.40 bitrate= 676.9kbits/sframe=  122 fps= 24 q=2.3 size=     379kB time=00:00:04.88 bitrate= 636.5kbits/sframe=  135 fps= 24 q=2.5 size=     396kB time=00:00:05.40 bitrate= 600.2kbits/sframe=  147 fps= 24 q=2.6 size=     412kB time=00:00:05.88 bitrate= 573.3kbits/sframe=  159 fps= 24 q=2.3 size=     427kB time=00:00:06.36 bitrate= 549.6kbits/sframe=  172 fps= 24 q=2.4 size=     443kB time=00:00:06.88 bitrate= 527.8kbits/sframe=  184 fps= 24 q=2.4 size=     459kB time=00:00:07.36 bitrate= 511.3kbits/sframe=  197 fps= 25 q=2.3 size=     476kB time=00:00:07.88 bitrate= 494.9kbits/sframe=  209 fps= 25 q=2.2 size=     492kB time=00:00:08.36 bitrate= 482.5kbits/sframe=  222 fps= 25 q=2.0 size=     509kB time=00:00:08.88 bitrate= 469.6kbits/sframe=  235 fps= 25 q=2.0 size=     526kB time=00:00:09.40 bitrate= 458.4kbits/sframe=  247 fps= 25 q=2.0 size=     542kB time=00:00:09.88 bitrate= 449.6kbits/sframe=  260 fps= 25 q=2.0 size=     559kB time=00:00:10.40 bitrate= 440.4kbits/sframe=  272 fps= 25 q=2.0 size=     576kB time=00:00:10.88 bitrate= 433.4kbits/sframe=  285 fps= 25 q=2.0 size=     593kB time=00:00:11.40 bitrate= 426.1kbits/sframe=  298 fps= 25 q=2.0 size=     610kB time=00:00:11.92 bitrate= 419.0kbits/sframe=  310 fps= 25 q=2.0 size=     626kB time=00:00:12.40 bitrate= 413.5kbits/sframe=  322 fps= 25 q=2.0 size=     642kB time=00:00:12.88 bitrate= 408.2kbits/sframe=  335 fps= 25 q=2.0 size=     659kB time=00:00:13.40 bitrate= 402.8kbits/sframe=  347 fps= 25 q=2.0 size=     675kB time=00:00:13.88 bitrate= 398.5kbits/sframe=  360 fps= 25 q=2.0 size=     692kB time=00:00:14.40 bitrate= 393.9kbits/sframe=  372 fps= 25 q=2.0 size=     709kB time=00:00:14.88 bitrate= 390.6kbits/sframe=  385 fps= 25 q=1.6 size=     726kB time=00:00:15.40 bitrate= 386.3kbits/sframe=  398 fps= 25 q=2.0 size=     747kB time=00:00:15.92 bitrate= 384.5kbits/sframe=  410 fps= 25 q=2.0 size=     764kB time=00:00:16.40 bitrate= 381.5kbits/sframe=  423 fps= 25 q=2.0 size=     781kB time=00:00:16.92 bitrate= 378.2kbits/sframe=  435 fps= 25 q=2.0 size=     798kB time=00:00:17.40 bitrate= 375.5kbits/sframe=  448 fps= 25 q=2.0 size=     815kB time=00:00:17.92 bitrate= 372.4kbits/sframe=  461 fps= 25 q=2.0 size=     831kB time=00:00:18.44 bitrate= 369.3kbits/sframe=  472 fps= 25 q=2.0 size=     847kB time=00:00:18.90 bitrate= 367.2kbits/sframe=  485 fps= 25 q=2.0 size=     864kB time=00:00:19.40 bitrate= 364.9kbits/sframe=  497 fps= 25 q=2.0 size=     881kB time=00:00:19.90 bitrate= 362.4kbits/sframe=  510 fps= 25 q=2.0 size=     898kB time=00:00:20.41 bitrate= 360.2kbits/sframe=  523 fps= 25 q=2.0 size=     914kB time=00:00:20.92 bitrate= 357.8kbits/sframe=  536 fps= 25 q=2.0 size=     931kB time=00:00:21.44 bitrate= 355.7kbits/sframe=  548 fps= 25 q=2.0 size=     947kB time=00:00:21.92 bitrate= 353.8kbits/sframe=  560 fps= 25 q=2.0 size=     963kB time=00:00:22.40 bitrate= 352.1kbits/sframe=  573 fps= 25 q=2.0 size=     980kB time=00:00:22.92 bitrate= 350.2kbits/sframe=  586 fps= 25 q=7.3 size=    1039kB time=00:00:23.44 bitrate= 363.2kbits/sframe=  598 fps= 25 q=2.0 size=    1053kB time=00:00:23.92 bitrate= 360.7kbits/sframe=  611 fps= 25 q=2.0 size=    1070kB time=00:00:24.44 bitrate= 358.6kbits/sframe=  623 fps= 25 q=2.0 size=    1086kB time=00:00:24.92 bitrate= 357.1kbits/sframe=  635 fps= 25 q=2.0 size=    1103kB time=00:00:25.41 bitrate= 355.5kbits/sframe=  648 fps= 25 q=2.0 size=    1120kB time=00:00:25.92 bitrate= 353.9kbits/sframe=  660 fps= 25 q=2.0 size=    1136kB time=00:00:26.42 bitrate= 352.3kbits/sframe=  673 fps= 25 q=1.6 size=    1158kB time=00:00:26.92 bitrate= 352.2kbits/sframe=  686 fps= 25 q=2.0 size=    1174kB time=00:00:27.44 bitrate= 350.5kbits/sframe=  698 fps= 25 q=2.0 size=    1191kB time=00:00:27.92 bitrate= 349.3kbits/sframe=  711 fps= 25 q=2.0 size=    1208kB time=00:00:28.44 bitrate= 348.0kbits/sframe=  723 fps= 25 q=2.0 size=    1225kB time=00:00:28.92 bitrate= 346.9kbits/sframe=  736 fps= 25 q=2.0 size=    1242kB time=00:00:29.44 bitrate= 345.5kbits/sframe=  749 fps= 25 q=2.0 size=    1259kB time=00:00:29.96 bitrate= 344.2kbits/sframe=  761 fps= 25 q=2.0 size=    1275kB time=00:00:30.44 bitrate= 343.2kbits/sframe=  774 fps= 25 q=2.0 size=    1292kB time=00:00:30.96 bitrate= 341.9kbits/sframe=  786 fps= 25 q=2.0 size=    1309kB time=00:00:31.44 bitrate= 341.0kbits/sframe=  799 fps= 25 q=2.0 size=    1326kB time=00:00:31.96 bitrate= 339.8kbits/sframe=  805 fps= 25 q=1.6 Lsize=    1364kB time=00:00:32.32 bitrate= 345.7kbits/s    
video:935kB audio:379kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 3.808289%
Received signal 2: terminating.
alain@debian:~$
 



j'ai perdu la video et le son . ça se  trouve où ce machin là ?

je vais quand meme pas etre obligé de réinstaller linux ?

Dernière modification par debian-alain (29-09-2016 09:19:16)

Hors ligne

#20 29-09-2016 09:20:15

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

puisque v4l2 ne semble rien faire , un conseil pour melt ?

Hors ligne

#21 29-09-2016 09:39:11

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-3-amd64
(G)UI : Mate 1.16
Inscription : 11-03-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

debian-alain a écrit :

j'ai fait une erreur chalu ?


J'attire seulement ton attention sur le fait qu'être en root n'est pas sans danger en cas de fausse manip et que ça doit être réservé à la configuration/maintenance du système et que lorsque ce n'est pas nécessaire pour une commande, on reste en user smile Tu as toutes les explications dans les cahiers du débutant

En ligne

#22 29-09-2016 10:36:14

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 3.16.0-4-amd64 - 3.16.39-1
(G)UI : gnome 1:3.14+3
Inscription : 21-10-2008

Re : [Résolu] logiciels lecture/enregistrement vhs

Salut debian-alain,

Voici en complément le tuto de fond concernant la session root (ou superutilisateur) :
https://debian-facile.org/doc:systeme:superutilisateur

... 2-1--1f79.gif

"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

En ligne

#23 29-09-2016 11:39:07

debian-alain
Membre
Distrib. : DEBIAN JESSIE 8.7
Noyau : Linux 3.16.0-4-amd64
(G)UI : GNOME
Inscription : 31-08-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

merci les gars .

un participant à l'irc  m'a demandé  mon dmesg .

j'y ai trouvé que le firmware  de la carte  d'acquisition était hs

j'ai donc , dans le doute , désinstallé et réinstallé le sfirmwares free et non free de ma debian

maintenant , ça fonctionne  à nouveau ..... jusque la prochaine panne

et pour répondre à chalu , oui ,maintenant je peux enregister mes vhs .

alain@debian:~$ dmesg
 



[    0.000000] CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=1432ba42-31c4-4ca6-a952-e96043b05bbf ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cc263fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cc264000-0x00000000cc964fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cc965000-0x00000000cc974fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cc975000-0x00000000cca9cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cca9d000-0x00000000cd7fcfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd7fd000-0x00000000cd7fdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd7fe000-0x00000000cd840fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd841000-0x00000000cdc74fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cdc75000-0x00000000cdff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cdff4000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/P8Z77-V LX, BIOS 2203 07/16/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0CF000000 mask FFF000000 uncachable
[    0.000000]   5 base 41FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [ffff8800000fd8a0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41fc00000-0x41fdfffff]
[    0.000000]  [mem 0x41fc00000-0x41fdfffff] page 2M
[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41c000000-0x41fbfffff]
[    0.000000]  [mem 0x41c000000-0x41fbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[    0.000000]  [mem 0x400000000-0x41bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0xcc263fff]
[    0.000000]  [mem 0x40200000-0xcc1fffff] page 2M
[    0.000000]  [mem 0xcc200000-0xcc263fff] page 4k
[    0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[    0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcd7fd000-0xcd7fdfff]
[    0.000000]  [mem 0xcd7fd000-0xcd7fdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcd841000-0xcdc74fff]
[    0.000000]  [mem 0xcd841000-0xcd9fffff] page 4k
[    0.000000]  [mem 0xcda00000-0xcdbfffff] page 2M
[    0.000000]  [mem 0xcdc00000-0xcdc74fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcdff4000-0xcdffffff]
[    0.000000]  [mem 0xcdff4000-0xcdffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x361d8000-0x370e3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CC968080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CC972CA0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CC968188 00AB17 (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CCA9B080 000040
[    0.000000] ACPI: APIC 0x00000000CC972DB0 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CC972E48 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000CC972E90 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000CC972ED0 0007CA (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0x00000000CC9736A0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CC9736D8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: DMAR 0x00000000CC974EE8 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: SSDT 0x00000000CC973AA0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CC974450 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x41fdfffff]
[    0.000000]   NODE_DATA [mem 0x41fde9000-0x41fdedfff]
[    0.000000]  [ffffea0000000000-ffffea000e7fffff] PMD -> [ffff88040f800000-ffff88041d5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x41fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xcc263fff]
[    0.000000]   node   0: [mem 0xcd7fd000-0xcd7fdfff]
[    0.000000]   node   0: [mem 0xcd841000-0xcdc74fff]
[    0.000000]   node   0: [mem 0xcdff4000-0xcdffffff]
[    0.000000]   node   0: [mem 0x100000000-0x41fdfffff]
[    0.000000] On node 0 totalpages: 4112449
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11378 pages used for memmap
[    0.000000]   DMA32 zone: 832165 pages, LIFO batch:31
[    0.000000]   Normal zone: 44793 pages used for memmap
[    0.000000]   Normal zone: 3276288 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xcf200000-0xdf1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc264000-0xcc964fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc965000-0xcc974fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc975000-0xcca9cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcca9d000-0xcd7fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd7fe000-0xcd840fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcdc75000-0xcdff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88041fa00000 s80960 r8192 d21440 u262144
[    0.000000] pcpu-alloc: s80960 r8192 d21440 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4056066
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=1432ba42-31c4-4ca6-a952-e96043b05bbf ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16127932K/16449796K available (5237K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 321864K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3417.629 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6835.25 BogoMIPS (lpj=13670516)
[    0.000026] pid_max: default: 32768 minimum: 301
[    0.000032] ACPI: Core revision 20140424
[    0.005551] ACPI: All ACPI Tables successfully acquired
[    0.005570] Security Framework initialized
[    0.005575] AppArmor: AppArmor disabled by boot time parameter
[    0.005576] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.006262] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.008609] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009644] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.009658] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.009853] Initializing cgroup subsys memory
[    0.009857] Initializing cgroup subsys devices
[    0.009861] Initializing cgroup subsys freezer
[    0.009863] Initializing cgroup subsys net_cls
[    0.009866] Initializing cgroup subsys blkio
[    0.009868] Initializing cgroup subsys perf_event
[    0.009870] Initializing cgroup subsys net_prio
[    0.009888] CPU: Physical Processor ID: 0
[    0.009889] CPU: Processor Core ID: 0
[    0.009892] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009894] mce: CPU supports 9 MCE banks
[    0.009904] CPU0: Thermal monitoring enabled (TM1)
[    0.009909] process: using mwait in idle threads
[    0.009912] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.009988] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.023193] ftrace: allocating 21697 entries in 85 pages
[    0.030165] dmar: Host address width 36
[    0.030166] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.030173] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.030174] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.030178] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.030178] dmar: RMRR base: 0x000000cc8e7000 end: 0x000000cc8f8fff
[    0.030180] dmar: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[    0.030249] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.030250] HPET id 0 under DRHD base 0xfed91000
[    0.030250] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.030393] Enabled IRQ remapping in x2apic mode
[    0.030394] Enabling x2apic
[    0.030395] Enabled x2apic
[    0.030399] Switched APIC routing to cluster x2apic.
[    0.030808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070540] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.070545] TSC deadline timer enabled
[    0.070561] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.070576] ... version:                3
[    0.070576] ... bit width:              48
[    0.070577] ... generic registers:      4
[    0.070578] ... value mask:             0000ffffffffffff
[    0.070578] ... max period:             0000ffffffffffff
[    0.070579] ... fixed-purpose events:   3
[    0.070579] ... event mask:             000000070000000f
[    0.071620] x86: Booting SMP configuration:
[    0.071622] .... node  #0, CPUs:      #1
[    0.082165] CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[    0.084726] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084801]  #2
[    0.095248] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.097933]  #3
[    0.108365] CPU3 microcode updated early to revision 0x29, date = 2013-06-12
[    0.111068]  #4 #5 #6 #7
[    0.163579] x86: Booted up 1 node, 8 CPUs
[    0.163582] smpboot: Total of 8 processors activated (54682.06 BogoMIPS)
[    0.169641] devtmpfs: initialized
[    0.173153] PM: Registering ACPI NVS region [mem 0xcc975000-0xcca9cfff] (1212416 bytes)
[    0.173172] PM: Registering ACPI NVS region [mem 0xcd7fe000-0xcd840fff] (274432 bytes)
[    0.173814] pinctrl core: initialized pinctrl subsystem
[    0.173872] NET: Registered protocol family 16
[    0.173959] cpuidle: using governor ladder
[    0.173961] cpuidle: using governor menu
[    0.173990] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.173991] ACPI: bus type PCI registered
[    0.173992] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.174059] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.174061] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.174120] PCI: Using configuration type 1 for base access
[    0.185865] ACPI: Added _OSI(Module Device)
[    0.185867] ACPI: Added _OSI(Processor Device)
[    0.185868] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.185868] ACPI: Added _OSI(Processor Aggregator Device)
[    0.187823] ACPI: Executed 1 blocks of module-level executable AML code
[    0.201858] ACPI: Dynamic OEM Table Load:
[    0.201863] ACPI: SSDT 0xFFFF88040F228000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.219373] ACPI: Dynamic OEM Table Load:
[    0.219377] ACPI: SSDT 0xFFFF88040ECE5C00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.233674] ACPI: Dynamic OEM Table Load:
[    0.233677] ACPI: SSDT 0xFFFF88040ED3D800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.246515] ACPI: Interpreter enabled
[    0.246519] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.246522] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.246532] ACPI: (supports S0 S3 S4 S5)
[    0.246533] ACPI: Using IOAPIC for interrupt routing
[    0.246552] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.251029] ACPI: Power Resource [FN00] (off)
[    0.251091] ACPI: Power Resource [FN01] (off)
[    0.251150] ACPI: Power Resource [FN02] (off)
[    0.251208] ACPI: Power Resource [FN03] (off)
[    0.251266] ACPI: Power Resource [FN04] (off)
[    0.251693] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.251697] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.251815] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.251912] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.252367] PCI host bridge to bus 0000:00
[    0.252369] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.252371] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.252372] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.252373] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.252374] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.252375] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.252376] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.252378] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.252379] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.252380] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.252381] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[    0.252386] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.252455] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.252479] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.252510] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.252542] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.252550] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.252554] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.252557] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.252639] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.252658] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.252723] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.252757] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.252790] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.252811] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
[    0.252879] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.252953] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.252971] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff]
[    0.253054] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.253100] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.253134] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.253148] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    0.253215] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.253252] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.253288] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.253420] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.253468] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.253501] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[    0.253576] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.253619] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.253650] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[    0.253725] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.253764] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.253795] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
[    0.253870] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.253908] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.253942] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.253961] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
[    0.254043] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.254088] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.254122] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[    0.254277] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.254293] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.254299] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.254306] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.254312] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.254318] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.254325] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff]
[    0.254364] pci 0000:00:1f.2: PME# supported from D3hot
[    0.254423] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.254436] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
[    0.254455] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.254548] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.254629] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.254717] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.254739] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.254771] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.254792] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.254899] pci 0000:03:00.0: supports D1 D2
[    0.254900] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.254934] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.261633] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.261638] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.261647] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.261736] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[    0.261853] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.261878] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[    0.261883] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.261888] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.261890] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.261891] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.261892] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.261893] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.261894] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.261895] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.261897] pci 0000:00:1c.5:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.261898] pci 0000:00:1c.5:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.261899] pci 0000:00:1c.5:   bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
[    0.261958] pci 0000:05:00.0: [1131:7133] type 00 class 0x048000
[    0.261988] pci 0000:05:00.0: reg 0x10: [mem 0xf7d00000-0xf7d007ff]
[    0.262130] pci 0000:05:00.0: supports D1 D2
[    0.262230] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.262242] pci 0000:04:00.0:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.262251] pci 0000:04:00.0:   bridge window [mem 0xf7d00000-0xf7dfffff] (subtractive decode)
[    0.262252] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.262254] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.262255] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.262256] pci 0000:04:00.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.262257] pci 0000:04:00.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.262258] pci 0000:04:00.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.262259] pci 0000:04:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.262260] pci 0000:04:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.262261] pci 0000:04:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.262263] pci 0000:04:00.0:   bridge window [mem 0xdf200000-0xfeafffff] (subtractive decode)
[    0.262359] pci 0000:06:00.0: [1912:0014] type 00 class 0x0c0330
[    0.262397] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[    0.262586] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.262626] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.269648] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.269655] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.269695] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.270045] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.270082] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.270116] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.270151] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.270186] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.270220] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.270255] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.270289] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.270480] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.270550] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.270552] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.270554] vgaarb: loaded
[    0.270555] vgaarb: bridge control possible 0000:00:02.0
[    0.270597] PCI: Using ACPI for IRQ routing
[    0.271957] PCI: pci_cache_line_size set to 64 bytes
[    0.272006] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.272008] e820: reserve RAM buffer [mem 0xcc264000-0xcfffffff]
[    0.272009] e820: reserve RAM buffer [mem 0xcd7fe000-0xcfffffff]
[    0.272010] e820: reserve RAM buffer [mem 0xcdc75000-0xcfffffff]
[    0.272011] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.272012] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[    0.272107] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.272111] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.274134] Switched to clocksource hpet
[    0.277699] pnp: PnP ACPI init
[    0.277707] ACPI: bus type PNP registered
[    0.277764] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.277767] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.277818] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.277819] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.277821] system 00:01: [io  0xffff] has been reserved
[    0.277822] system 00:01: [io  0xffff] has been reserved
[    0.277823] system 00:01: [io  0x0400-0x0453] could not be reserved
[    0.277824] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.277826] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.277827] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.277829] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277853] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.277887] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.277889] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.277949] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.277951] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277987] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.277988] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278151] pnp 00:06: [dma 0 disabled]
[    0.278188] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.278337] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.278338] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.278340] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.278341] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.278342] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.278344] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.278345] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.278347] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.278348] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.278349] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.278351] system 00:07: [mem 0xdf200000-0xdf200fff] has been reserved
[    0.278352] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278456] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    0.278457] system 00:08: [mem 0x40000000-0x401fffff] has been reserved
[    0.278459] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.278474] pnp: PnP ACPI: found 9 devices
[    0.278474] ACPI: bus type PNP unregistered
[    0.284403] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.284408] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.284424] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.284426] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.284433] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.284438] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.284445] pci 0000:04:00.0:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.284458] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[    0.284461] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.284468] pci 0000:00:1c.7: PCI bridge to [bus 06]
[    0.284472] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.284480] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.284481] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.284482] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.284483] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.284484] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.284485] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.284486] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.284487] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.284488] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.284489] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[    0.284491] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.284492] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.284493] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.284494] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.284495] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.284496] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.284497] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.284499] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.284500] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.284501] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[    0.284502] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.284503] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.284504] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff]
[    0.284505] pci_bus 0000:05: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.284506] pci_bus 0000:05: resource 4 [mem 0xf7d00000-0xf7dfffff]
[    0.284507] pci_bus 0000:05: resource 5 [io  0x0000-0x0cf7]
[    0.284508] pci_bus 0000:05: resource 6 [io  0x0d00-0xffff]
[    0.284509] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
[    0.284510] pci_bus 0000:05: resource 8 [mem 0x000d0000-0x000d3fff]
[    0.284511] pci_bus 0000:05: resource 9 [mem 0x000d4000-0x000d7fff]
[    0.284513] pci_bus 0000:05: resource 10 [mem 0x000d8000-0x000dbfff]
[    0.284514] pci_bus 0000:05: resource 11 [mem 0x000dc000-0x000dffff]
[    0.284515] pci_bus 0000:05: resource 12 [mem 0x000e0000-0x000e3fff]
[    0.284516] pci_bus 0000:05: resource 13 [mem 0x000e4000-0x000e7fff]
[    0.284517] pci_bus 0000:05: resource 14 [mem 0xdf200000-0xfeafffff]
[    0.284518] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.284592] NET: Registered protocol family 2
[    0.284841] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.285018] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.285129] TCP: Hash tables configured (established 131072 bind 65536)
[    0.285140] TCP: reno registered
[    0.285152] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.285196] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.285291] NET: Registered protocol family 1
[    0.285310] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.285321] pci 0000:00:02.0: Video device with shadowed ROM
[    0.285797] PCI: CLS 64 bytes, default 64
[    0.285834] Unpacking initramfs...
[    0.479247] Freeing initrd memory: 15408K (ffff8800361d8000 - ffff8800370e4000)
[    0.479347] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.479349] software IO TLB [mem 0xc8264000-0xcc264000] (64MB) mapped at [ffff8800c8264000-ffff8800cc263fff]
[    0.479641] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.479682] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
[    0.479686] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
[    0.479690] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
[    0.479696] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
[    0.479701] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x29
[    0.479706] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x29
[    0.479711] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x29
[    0.479716] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x29
[    0.479758] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.479999] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.480038] audit: initializing netlink subsys (disabled)
[    0.480051] audit: type=2000 audit(1475140969.468:1): initialized
[    0.480395] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.480411] zbud: loaded
[    0.480598] VFS: Disk quotas dquot_6.5.2
[    0.480617] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.480664] msgmni has been set to 31530
[    0.480901] alg: No test for stdrng (krng)
[    0.480926] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.480974] io scheduler noop registered
[    0.480975] io scheduler deadline registered
[    0.481014] io scheduler cfq registered (default)
[    0.481155] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[    0.481449] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.481461] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.481477] intel_idle: MWAIT substates: 0x1120
[    0.481478] intel_idle: v0.4 model 0x2A
[    0.481478] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.481700] GHES: HEST is not enabled!
[    0.481748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.502187] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.502535] Linux agpgart interface v0.103
[    0.502624] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.504912] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.504915] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.504988] mousedev: PS/2 mouse device common for all mice
[    0.505024] rtc_cmos 00:02: RTC can wake from S4
[    0.505136] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.505160] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.505168] Intel P-state driver initializing.
[    0.505178] Intel pstate controlling: cpu 0
[    0.505192] Intel pstate controlling: cpu 1
[    0.505204] Intel pstate controlling: cpu 2
[    0.505216] Intel pstate controlling: cpu 3
[    0.505229] Intel pstate controlling: cpu 4
[    0.505242] Intel pstate controlling: cpu 5
[    0.505256] Intel pstate controlling: cpu 6
[    0.505269] Intel pstate controlling: cpu 7
[    0.505307] ledtrig-cpu: registered to indicate activity on CPUs
[    0.506072] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.506074] AMD IOMMUv2 functionality not available on this system
[    0.506190] TCP: cubic registered
[    0.506333] NET: Registered protocol family 10
[    0.506658] mip6: Mobile IPv6
[    0.506664] NET: Registered protocol family 17
[    0.506673] mpls_gso: MPLS GSO support
[    0.507204] registered taskstats version 1
[    0.507813] rtc_cmos 00:02: setting system clock to 2016-09-29 09:22:49 UTC (1475140969)
[    0.507943] PM: Hibernation image not present or could not be loaded.
[    0.508922] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    0.508924] Write protecting the kernel read-only data: 8192k
[    0.509382] Freeing unused kernel memory: 896K (ffff880001520000 - ffff880001600000)
[    0.510071] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.520689] systemd-udevd[92]: starting version 215
[    0.521049] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.534617] ACPI: Fan [FAN0] (off)
[    0.534670] ACPI: Fan [FAN1] (off)
[    0.534697] ACPI: Fan [FAN2] (off)
[    0.534727] ACPI: Fan [FAN3] (off)
[    0.535467] ACPI: bus type USB registered
[    0.535483] usbcore: registered new interface driver usbfs
[    0.535489] usbcore: registered new interface driver hub
[    0.535523] usbcore: registered new device driver usb
[    0.536114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.536265] ehci-pci: EHCI PCI platform driver
[    0.536421] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.536431] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.537310] SCSI subsystem initialized
[    0.538394] libata version 3.00 loaded.
[    0.566686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.566692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.566892] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.566966] thermal LNXTHERM:00: registered as thermal_zone0
[    0.566968] ACPI: Thermal Zone [TZ00] (28 C)
[    0.567045] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc90005bb2000, d8:50:e6:53:68:c4, XID 08000800 IRQ 43
[    0.567046] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.567171] thermal LNXTHERM:01: registered as thermal_zone1
[    0.567173] ACPI: Thermal Zone [TZ01] (30 C)
[    0.567272] ACPI: Fan [FAN4] (off)
[    0.567774] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.567790] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    0.567894] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.567896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.567897] usb usb1: Product: xHCI Host Controller
[    0.567898] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.567899] usb usb1: SerialNumber: 0000:00:14.0
[    0.567995] hub 1-0:1.0: USB hub found
[    0.568009] hub 1-0:1.0: 4 ports detected
[    0.568265] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.568268] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.568358] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.568359] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.568361] usb usb2: Product: xHCI Host Controller
[    0.568362] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.568362] usb usb2: SerialNumber: 0000:00:14.0
[    0.568445] hub 2-0:1.0: USB hub found
[    0.568458] hub 2-0:1.0: 4 ports detected
[    0.568773] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.568776] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
[    0.574210] xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
[    0.574213] xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
[    0.574216] xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X
[    0.574219] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
[    0.574222] xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X
[    0.574225] xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X
[    0.574228] xhci_hcd 0000:06:00.0: irq 51 for MSI/MSI-X
[    0.574231] xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
[    0.574359] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.574361] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.574362] usb usb3: Product: xHCI Host Controller
[    0.574363] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.574363] usb usb3: SerialNumber: 0000:06:00.0
[    0.574439] hub 3-0:1.0: USB hub found
[    0.574450] hub 3-0:1.0: 4 ports detected
[    0.574561] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    0.574563] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
[    0.574565] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.574569] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
[    0.574587] ehci-pci 0000:00:1a.0: debug port 2
[    0.577752] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.577763] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.577764] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.577765] usb usb4: Product: xHCI Host Controller
[    0.577766] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.577766] usb usb4: SerialNumber: 0000:06:00.0
[    0.577879] hub 4-0:1.0: USB hub found
[    0.577892] hub 4-0:1.0: 4 ports detected
[    0.578489] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.578504] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7e18000
[    0.586551] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.586712] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.586714] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.586715] usb usb5: Product: EHCI Host Controller
[    0.586716] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.586717] usb usb5: SerialNumber: 0000:00:1a.0
[    0.586807] hub 5-0:1.0: USB hub found
[    0.586811] hub 5-0:1.0: 2 ports detected
[    0.586955] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.586958] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.586968] ehci-pci 0000:00:1d.0: debug port 2
[    0.590861] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.590864] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000
[    0.602595] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.602653] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    0.602664] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.602665] usb usb6: Product: EHCI Host Controller
[    0.602665] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    0.602666] usb usb6: SerialNumber: 0000:00:1d.0
[    0.602752] hub 6-0:1.0: USB hub found
[    0.602756] hub 6-0:1.0: 2 ports detected
[    0.602901] ahci 0000:00:1f.2: version 3.0
[    0.603003] ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
[    0.618625] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.618627] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[    0.659298] scsi0 : ahci
[    0.659586] scsi1 : ahci
[    0.659852] scsi2 : ahci
[    0.660110] scsi3 : ahci
[    0.660299] scsi4 : ahci
[    0.660455] scsi5 : ahci
[    0.660502] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 53
[    0.660503] ata2: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16180 irq 53
[    0.660505] ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 53
[    0.660506] ata4: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16280 irq 53
[    0.660508] ata5: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16300 irq 53
[    0.660509] ata6: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16380 irq 53
[    0.943056] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[    0.979096] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.979113] ata5: SATA link down (SStatus 0 SControl 300)
[    0.979133] ata6: SATA link down (SStatus 0 SControl 300)
[    0.979168] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.979194] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.979217] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.979455] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.979458] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88041f056b58), AE_NOT_FOUND (20140424/psparse-536)
[    0.979750] ata2.00: ATA-8: ST3000DM001-1CH166, CC24, max UDMA/133
[    0.979752] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.980154] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.980158] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88041f056b58), AE_NOT_FOUND (20140424/psparse-536)
[    0.980425] ata2.00: configured for UDMA/133
[    0.985253] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.985257] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88041f056bd0), AE_NOT_FOUND (20140424/psparse-536)
[    0.987275] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.987277] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88041f056a68), AE_NOT_FOUND (20140424/psparse-536)
[    0.987282] ata4.00: ATAPI: HL-DT-ST BD-RE  BH10LS38, 1.00, max UDMA/133
[    0.987300] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.987303] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88041f056ae0), AE_NOT_FOUND (20140424/psparse-536)
[    0.987308] ata3.00: ATAPI: HL-DT-ST BD-RE  BH10LS38, 1.00, max UDMA/133
[    0.991232] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.991236] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88041f056ae0), AE_NOT_FOUND (20140424/psparse-536)
[    0.991241] ata3.00: configured for UDMA/133
[    0.991252] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.991254] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88041f056a68), AE_NOT_FOUND (20140424/psparse-536)
[    0.991265] ata4.00: configured for UDMA/133
[    1.074085] usb 3-3: New USB device found, idVendor=03f0, idProduct=c311
[    1.074087] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.074088] usb 3-3: Product: ENVY 5530 series
[    1.074089] usb 3-3: Manufacturer: HP
[    1.074090] usb 3-3: SerialNumber: CN595530XD06BX
[    1.078577] usb-storage 3-3:1.2: USB Mass Storage device detected
[    1.078906] scsi6 : usb-storage 3-3:1.2
[    1.078994] usbcore: registered new interface driver usb-storage
[    1.084487] ata1.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
[    1.084491] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.104801] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    1.104808] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88041f056bd0), AE_NOT_FOUND (20140424/psparse-536)
[    1.105022] ata1.00: configured for UDMA/133
[    1.105229] scsi 0:0:0:0: Direct-Access     ATA      ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
[    1.105813] scsi 1:0:0:0: Direct-Access     ATA      ST3000DM001-1CH1 CC24 PQ: 0 ANSI: 5
[    1.114927] scsi 2:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10LS38  1.00 PQ: 0 ANSI: 5
[    1.139128] scsi 3:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10LS38  1.00 PQ: 0 ANSI: 5
[    1.156519] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.156522] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.156559] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[    1.156562] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.156590] sd 1:0:0:0: [sdb] Write Protect is off
[    1.156593] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.156601] sd 0:0:0:0: [sda] Write Protect is off
[    1.156604] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.156609] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.156633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.180504] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.180506] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.180589] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.187348] usb 5-1: new high-speed USB device number 2 using ehci-pci
[    1.188722]  sdb: sdb1
[    1.188845] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.204521] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.204608] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    1.205092] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.205134] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.205167] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.205193] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.216954]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.217343] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.319926] usb 5-1: New USB device found, idVendor=8087, idProduct=0024
[    1.319939] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.320346] hub 5-1:1.0: USB hub found
[    1.320433] hub 5-1:1.0: 6 ports detected
[    1.435687] usb 6-1: new high-speed USB device number 2 using ehci-pci
[    1.479987] tsc: Refined TSC clocksource calibration: 3417.824 MHz
[    1.568264] usb 6-1: New USB device found, idVendor=8087, idProduct=0024
[    1.568278] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.568691] hub 6-1:1.0: USB hub found
[    1.568873] hub 6-1:1.0: 8 ports detected
[    1.690515] PM: Starting manual resume from disk
[    1.690520] PM: Hibernation image partition 8:6 present
[    1.690522] PM: Looking for hibernation image.
[    1.690792] PM: Image not found (code -22)
[    1.690795] PM: Hibernation image not present or could not be loaded.
[    1.808829] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    1.827902] usb 4-2: New USB device found, idVendor=152d, idProduct=0539
[    1.827907] usb 4-2: New USB device strings: Mfr=10, Product=11, SerialNumber=5
[    1.827910] usb 4-2: Product: USB to ATA/ATAPI Bridge
[    1.827912] usb 4-2: Manufacturer: JMicron
[    1.827914] usb 4-2: SerialNumber: 000000000000
[    1.829610] usb-storage 4-2:1.0: USB Mass Storage device detected
[    1.829928] scsi7 : usb-storage 4-2:1.0
[    1.900310] usb 5-1.1: new full-speed USB device number 3 using ehci-pci
[    1.995449] usb 5-1.1: New USB device found, idVendor=058f, idProduct=9520
[    1.995453] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.995456] usb 5-1.1: Product: EMV Smartcard Reader
[    1.995458] usb 5-1.1: Manufacturer: Generic
[    2.064532] usb 5-1.2: new high-speed USB device number 4 using ehci-pci
[    2.065630] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.077820] scsi 6:0:0:0: Direct-Access     HP       ENVY 5530 series 1.00 PQ: 0 ANSI: 5
[    2.078159] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    2.079968] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    2.158895] usb 5-1.2: New USB device found, idVendor=058f, idProduct=6362
[    2.158900] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.158911] usb 5-1.2: Product: Mass Storage Device
[    2.158913] usb 5-1.2: Manufacturer: Generic
[    2.158915] usb 5-1.2: SerialNumber: 058F63626420
[    2.159330] usb-storage 5-1.2:1.0: USB Mass Storage device detected
[    2.159554] scsi8 : usb-storage 5-1.2:1.0
[    2.228753] usb 5-1.3: new high-speed USB device number 5 using ehci-pci
[    2.321484] usb 5-1.3: New USB device found, idVendor=1a40, idProduct=0201
[    2.321497] usb 5-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.321500] usb 5-1.3: Product: USB 2.0 Hub [MTT]
[    2.321803] hub 5-1.3:1.0: USB hub found
[    2.321955] hub 5-1.3:1.0: 7 ports detected
[    2.392942] usb 6-1.5: new full-speed USB device number 3 using ehci-pci
[    2.481258] Switched to clocksource tsc
[    2.486232] usb 6-1.5: New USB device found, idVendor=0c76, idProduct=1605
[    2.486237] usb 6-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.486240] usb 6-1.5: Product: USB Audio Controller
[    2.557169] usb 6-1.6: new full-speed USB device number 4 using ehci-pci
[    2.616118] random: nonblocking pool is initialized
[    2.651448] usb 6-1.6: New USB device found, idVendor=0d8c, idProduct=013a
[    2.651453] usb 6-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.651464] usb 6-1.6: Product: USB PnP Sound Device
[    2.651467] usb 6-1.6: Manufacturer: C-Media Electronics Inc.      
[    2.721373] usb 6-1.7: new full-speed USB device number 5 using ehci-pci
[    2.817254] usb 6-1.7: New USB device found, idVendor=046d, idProduct=c52b
[    2.817259] usb 6-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.817262] usb 6-1.7: Product: USB Receiver
[    2.817264] usb 6-1.7: Manufacturer: Logitech
[    2.830247] scsi 7:0:0:0: Direct-Access     ST2000DM 001-9YN164       0X03 PQ: 0 ANSI: 6
[    2.830508] scsi 7:0:0:1: Direct-Access     ST2000DM 001-1CH164       0X03 PQ: 0 ANSI: 6
[    2.830789] scsi 7:0:0:2: Direct-Access     ST4000VM 000-2AF166       0X03 PQ: 0 ANSI: 6
[    2.831185] sd 7:0:0:0: Attached scsi generic sg5 type 0
[    2.831312] sd 7:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.831575] sd 7:0:0:1: Attached scsi generic sg6 type 0
[    2.831952] sd 7:0:0:2: Attached scsi generic sg7 type 0
[    2.832290] sd 7:0:0:0: [sdd] Write Protect is off
[    2.832294] sd 7:0:0:0: [sdd] Mode Sense: 3b 00 10 08
[    2.833474] sd 7:0:0:0: [sdd] No Caching mode page found
[    2.833551] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[    2.833635] sd 7:0:0:1: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    2.833721] sd 7:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
[    2.834704] sd 7:0:0:1: [sde] Write Protect is off
[    2.834709] sd 7:0:0:1: [sde] Mode Sense: 3b 00 10 08
[    2.834847] sd 7:0:0:2: [sdf] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[    2.834852] sd 7:0:0:2: [sdf] 4096-byte physical blocks
[    2.835827] sd 7:0:0:1: [sde] No Caching mode page found
[    2.835893] sd 7:0:0:1: [sde] Assuming drive cache: write through
[    2.836737] sd 7:0:0:2: [sdf] Write Protect is off
[    2.836742] sd 7:0:0:2: [sdf] Mode Sense: 3b 00 10 08
[    2.837956] sd 7:0:0:2: [sdf] No Caching mode page found
[    2.838032] sd 7:0:0:2: [sdf] Assuming drive cache: write through
[    2.841152] sd 7:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
[    2.852287]  sdd: sdd1
[    2.889603] usb 6-1.8: new high-speed USB device number 6 using ehci-pci
[    2.896344]  sde: sde1
[    3.014638] usb 6-1.8: New USB device found, idVendor=04f2, idProduct=a13c
[    3.014643] usb 6-1.8: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    3.014646] usb 6-1.8: Product: HP Deluxe Webcam KQ246AA
[    3.014648] usb 6-1.8: Manufacturer: HP Deluxe Webcam KQ246AA
[    3.158762] scsi 8:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    3.159342] scsi 8:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    3.159961] scsi 8:0:0:2: Direct-Access     Generic- SM/xD Picture    1.02 PQ: 0 ANSI: 0
[    3.160475] scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0
[    3.160787] sd 8:0:0:0: Attached scsi generic sg8 type 0
[    3.161037] sd 8:0:0:1: Attached scsi generic sg9 type 0
[    3.161243] sd 8:0:0:2: Attached scsi generic sg10 type 0
[    3.161430] sd 8:0:0:3: Attached scsi generic sg11 type 0
[    3.166466] sd 8:0:0:0: [sdg] Attached SCSI removable disk
[    3.167091] sd 8:0:0:1: [sdh] Attached SCSI removable disk
[    3.167716] sd 8:0:0:2: [sdi] Attached SCSI removable disk
[    3.168311] sd 8:0:0:3: [sdj] Attached SCSI removable disk
[    3.395916] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    3.416930] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    3.417194] systemd[1]: Detected architecture 'x86-64'.
[    4.386970] systemd[1]: Inserted module 'autofs4'
[    4.411796] systemd[1]: Set hostname to <debian>.
[    8.730027] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.730099] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.730125] systemd[1]: Starting Remote File Systems (Pre).
[    8.730156] systemd[1]: Reached target Remote File Systems (Pre).
[    8.730174] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    8.730206] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.730217] systemd[1]: Starting Encrypted Volumes.
[    8.730227] systemd[1]: Reached target Encrypted Volumes.
[    8.730258] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.730343] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.730358] systemd[1]: Expecting device dev-disk-by\x2duuid-86d0c2d8\x2d7a70\x2d4d03\x2d8bc9\x2dbbdee70bec31.device...
[    8.730369] systemd[1]: Expecting device dev-disk-by\x2duuid-13a6167a\x2d1b50\x2d471b\x2d9748\x2d3ccd0c793914.device...
[    8.730379] systemd[1]: Starting Root Slice.
[    8.730407] systemd[1]: Created slice Root Slice.
[    8.730417] systemd[1]: Starting User and Session Slice.
[    8.730516] systemd[1]: Created slice User and Session Slice.
[    8.730528] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.730564] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.730575] systemd[1]: Starting Delayed Shutdown Socket.
[    8.730602] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.730612] systemd[1]: Starting Journal Socket (/dev/log).
[    8.730642] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.730656] systemd[1]: Starting udev Control Socket.
[    8.730678] systemd[1]: Listening on udev Control Socket.
[    8.730691] systemd[1]: Starting udev Kernel Socket.
[    8.730712] systemd[1]: Listening on udev Kernel Socket.
[    8.730725] systemd[1]: Starting Journal Socket.
[    8.730755] systemd[1]: Listening on Journal Socket.
[    8.730775] systemd[1]: Starting System Slice.
[    8.730864] systemd[1]: Created slice System Slice.
[    8.730883] systemd[1]: Started File System Check on Root Device.
[    8.730892] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    8.730990] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.731003] systemd[1]: Starting system-getty.slice.
[    8.731093] systemd[1]: Created slice system-getty.slice.
[    8.731119] systemd[1]: Starting Increase datagram queue length...
[    8.731540] systemd[1]: Starting udev Coldplug all Devices...
[    8.731983] systemd[1]: Mounting Huge Pages File System...
[    8.732431] systemd[1]: Mounting Debug File System...
[    8.732847] systemd[1]: Mounting POSIX Message Queue File System...
[    8.733328] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.759315] systemd[1]: Starting Load Kernel Modules...
[    8.769000] systemd[1]: Started Set Up Additional Binary Formats.
[    8.769029] systemd[1]: Starting Slices.
[    8.769044] systemd[1]: Reached target Slices.
[    8.989293] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.989621] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.018669] systemd[1]: Started Increase datagram queue length.
[    9.018778] systemd[1]: Starting Syslog Socket.
[    9.018818] systemd[1]: Listening on Syslog Socket.
[    9.018837] systemd[1]: Starting Journal Service...
[    9.019305] systemd[1]: Started Journal Service.
[    9.200061] lp: driver loaded but no devices found
[    9.282155] ppdev: user-space parallel port driver
[    9.377342] fuse init (API version 7.23)
[    9.490023] systemd-udevd[248]: starting version 215
[    9.837206] sd 7:0:0:0: [sdd] Attached SCSI disk
[    9.839616] sd 7:0:0:1: [sde] Attached SCSI disk
[    9.879153]  sdf: sdf1
[    9.879831] sd 7:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
[    9.881980] sd 7:0:0:2: [sdf] Attached SCSI disk
[   10.730234] wmi: Mapper loaded
[   10.790019] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   10.846862] [drm] Initialized drm 1.1.0 20060810
[   10.869794] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[   10.869797] ACPI: Power Button [PWRB]
[   10.869829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   10.869831] ACPI: Power Button [PWRF]
[   10.908672] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   10.955124] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.019464] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[   11.019468] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.053361] mei_me 0000:00:16.0: irq 54 for MSI/MSI-X
[   11.056388] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[   11.056391] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.056394] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   11.056396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.056397] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   11.056398] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.056399] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[   11.056401] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.056402] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.200943] [drm] Memory usable by graphics device = 2048M
[   11.200946] [drm] Replacing VGA console driver
[   11.201296] Console: switching to colour dummy device 80x25
[   11.204924] media: Linux media interface: v0.10
[   11.211127] Linux video capture interface: v2.00
[   11.224560] i915 0000:00:02.0: irq 55 for MSI/MSI-X
[   11.224568] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.224569] [drm] Driver supports precise vblank timestamp query.
[   11.224635] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.227794] [drm] Wrong MCH_SSKPD value: 0x16040307
[   11.227795] [drm] This can cause pipe underruns and display issues.
[   11.227796] [drm] Please upgrade your BIOS to fix this.
[   11.254930] fbcon: inteldrmfb (fb0) is primary device
[   11.280982] Console: switching to colour frame buffer device 240x67
[   11.286171] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.286173] i915 0000:00:02.0: registered panic notifier
[   11.348531] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.348735] acpi device:49: registered as cooling_device13
[   11.348803] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   11.348826] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   11.444845] saa7130/34: v4l2 driver version 0, 2, 17 loaded
[   11.445023] saa7133[0]: found at 0000:05:00.0, rev: 209, irq: 17, latency: 32, mmio: 0xf7d00000
[   11.445029] saa7133[0]: subsystem: 0070:6707, board: Hauppauge WinTV-HVR1120 DVB-T/Hybrid [card=156,autodetected]
[   11.445042] saa7133[0]: board init: gpio is 40000
[   11.492878] Registered IR keymap rc-hauppauge
[   11.492960] input: saa7134 IR (Hauppauge WinTV-HVR as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/0000:05:00.0/rc/rc0/input7
[   11.492963] rc0: saa7134 IR (Hauppauge WinTV-HVR as /devices/pci0000:00/0000:00:1c.5/0000:04:00.0/0000:05:00.0/rc/rc0
[   11.605252] lirc_dev: IR Remote Control driver registered, major 250
[   11.610656] IR JVC protocol handler initialized
[   11.612806] rc rc0: lirc_dev: driver ir-lirc-codec (saa7134) registered at minor = 0
[   11.612808] IR LIRC bridge handler initialized
[   11.612995] input: MCE IR Keyboard/Mouse (saa7134) as /devices/virtual/input/input8
[   11.613023] IR MCE Keyboard/mouse protocol handler initialized
[   11.613396] IR RC5(x) protocol handler initialized
[   11.613470] IR NEC protocol handler initialized
[   11.613472] IR Sharp protocol handler initialized
[   11.613548] IR RC6 protocol handler initialized
[   11.613551] IR SANYO protocol handler initialized
[   11.614459] IR Sony protocol handler initialized
[   11.649085] saa7133[0]: i2c eeprom 00: 70 00 07 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   11.649090] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   11.649094] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 b0 ff ff ff ff
[   11.649098] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.649102] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 06 32 97 04 00 20 00 ff ff ff
[   11.649106] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.649111] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.649115] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.649119] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 a3 1a 84 f0 73 05 29 00
[   11.649130] saa7133[0]: i2c eeprom 90: 84 08 00 06 89 06 01 00 95 39 8d 72 07 70 73 09
[   11.649134] saa7133[0]: i2c eeprom a0: 23 5f 73 0a f4 9b 72 0b 2f 72 0e 01 72 0f 45 72
[   11.649138] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 73 13 a2 69 79 54 00 00 00 00 00
[   11.649142] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.649146] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.649150] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.649154] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.649160] tveeprom 8-0050: Hauppauge model 67209, rev C3F5, serial# 8657571
[   11.649162] tveeprom 8-0050: MAC address is 00:0d:fe:84:1a:a3
[   11.649163] tveeprom 8-0050: tuner model is NXP 18271C2 (idx 155, type 54)
[   11.649164] tveeprom 8-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[   11.649166] tveeprom 8-0050: audio processor is SAA7131 (idx 41)
[   11.649167] tveeprom 8-0050: decoder processor is SAA7131 (idx 35)
[   11.649168] tveeprom 8-0050: has radio, has IR receiver, has no IR transmitter
[   11.649168] saa7133[0]: hauppauge eeprom: model=67209
[   11.680884] snd_hda_intel 0000:00:1b.0: irq 56 for MSI/MSI-X
[   11.765820] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   11.765823] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.765824] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.765825] sound hdaudioC0D0:    mono: mono_out=0x0
[   11.765826] sound hdaudioC0D0:    dig-out=0x11/0x1e
[   11.765827] sound hdaudioC0D0:    inputs:
[   11.765828] sound hdaudioC0D0:      Front Mic=0x19
[   11.765829] sound hdaudioC0D0:      Rear Mic=0x18
[   11.765830] sound hdaudioC0D0:      Line=0x1a
[   11.948848] asus_wmi: ASUS WMI generic driver loaded
[   12.029239] AVX version of gcm_enc/dec engaged.
[   12.030145] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[   12.096898] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.096943] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.096981] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.097027] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   12.097062] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   12.097095] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   12.169780] tuner 8-004b: Tuner -1 found with type(s) Radio TV.
[   12.249903] tda829x 8-004b: setting tuner address to 60
[   12.331374] asus_wmi: Initialization: 0x0
[   12.331403] asus_wmi: BIOS WMI version: 0.9
[   12.331434] asus_wmi: SFUN value: 0x0
[   12.331703] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input15
[   12.332618] asus_wmi: Backlight controlled by ACPI video driver
[   12.353185] iTCO_vendor_support: vendor-support=0
[   12.383506] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   12.383538] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   12.383638] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.554228] alg: No test for crc32 (crc32-pclmul)
[   12.667796] tda18271 8-0060: creating new instance
[   12.714515] TDA18271HD/C2 detected @ 8-0060
[   12.719489] Adding 32897020k swap on /dev/sda6.  Priority:-1 extents:1 across:32897020k FS
[   12.843064] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   13.291753] intel_rapl: Found RAPL domain package
[   13.291759] intel_rapl: Found RAPL domain core
[   13.291763] intel_rapl: Found RAPL domain uncore
[   13.291773] intel_rapl: RAPL package 0 domain package locked by BIOS
[   13.295256] tda18271: performing RF tracking filter calibration
[   13.640945] hidraw: raw HID events driver (C) Jiri Kosina
[   13.673260] usbcore: registered new interface driver usbhid
[   13.673264] usbhid: USB HID core driver
[   13.680561] uvcvideo: Found UVC 1.00 device HP Deluxe Webcam KQ246AA (04f2:a13c)
[   13.685355] input: USB Audio Controller as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.5/6-1.5:1.3/0003:0C76:1605.0001/input/input16
[   13.685446] hid-generic 0003:0C76:1605.0001: input,hidraw0: USB HID v1.00 Device [USB Audio Controller] on usb-0000:00:1d.0-1.5/input3
[   13.685719] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.6/6-1.6:1.3/0003:0D8C:013A.0002/input/input17
[   13.685795] hid-generic 0003:0D8C:013A.0002: input,hidraw1: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:00:1d.0-1.6/input3
[   13.687617] input: HP Deluxe Webcam KQ246AA HP Deluxe Webcam KQ246AA as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.4/0003:04F2:A13C.0006/input/input18
[   13.687689] hid-generic 0003:04F2:A13C.0006: input,hidraw2: USB HID v1.11 Joystick [HP Deluxe Webcam KQ246AA HP Deluxe Webcam KQ246AA] on usb-0000:00:1d.0-1.8/input4
[   13.688952] input: HP Deluxe Webcam KQ246AA as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.8/6-1.8:1.0/input/input19
[   13.689024] usbcore: registered new interface driver uvcvideo
[   13.689026] USB Video Class driver (1.1.1)
[   13.707678] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.7/input2
[   13.762287] input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.7/6-1.7:1.2/0003:046D:C52B.0005/0003:046D:C52B.0007/input/input20
[   13.762497] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:1d.0-1.7:1
[   13.764408] input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.7/6-1.7:1.2/0003:046D:C52B.0005/0003:046D:C52B.0008/input/input21
[   13.764523] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:1d.0-1.7:2
[   14.481166] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   14.490736] usb 6-1.8: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[   14.490741] usb 6-1.8: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1
[   14.490989] usbcore: registered new interface driver snd-usb-audio
[   16.666913] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   17.431280] systemd-journald[230]: Received request to flush runtime journal from PID 1
[   18.194935] WARNING! power/level is deprecated; use power/control instead
[   18.250887] usblp 3-3:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
[   18.250920] usbcore: registered new interface driver usblp
[   18.308959] systemd-journald[230]: Received request to flush runtime journal from PID 1
[   18.816015] RPC: Registered named UNIX socket transport module.
[   18.816019] RPC: Registered udp transport module.
[   18.816021] RPC: Registered tcp transport module.
[   18.816022] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.834670] FS-Cache: Loaded
[   18.850562] FS-Cache: Netfs 'nfs' registered for caching
[   18.875198] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.463353] vboxdrv: Found 8 processor cores
[   20.481051] vboxdrv: TSC mode is Invariant, tentative frequency 3417823687 Hz
[   20.481055] vboxdrv: Successfully loaded version 5.1.6 (interface 0x00260000)
[   21.206137] cfg80211: Calling CRDA to update world regulatory domain
[   21.368075] VBoxNetFlt: Successfully started.
[   21.501153] VBoxNetAdp: Successfully started.
[   21.557074] VBoxPciLinuxInit
[   21.586416] cfg80211: World regulatory domain updated:
[   21.586420] cfg80211:  DFS Master region: unset
[   21.586422] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   21.586425] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.586428] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   21.586430] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   21.586432] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   21.586435] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   21.586438] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   21.586440] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   21.586442] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   21.795688] vboxpci: IOMMU not found (not registered)
[   23.211509] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[   23.315328] r8169 0000:03:00.0 eth0: link down
[   23.315375] r8169 0000:03:00.0 eth0: link down
[   23.315376] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.073223] r8169 0000:03:00.0 eth0: link up
[   26.073234] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   26.238660] usblp1: removed
[   26.245203] usblp 3-3:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0xC311
[   31.523223] tda18271: RF tracking filter calibration complete
[   31.579296] tda829x 8-004b: type set to tda8290+18271
[   34.880964] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   34.904096] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   34.938151] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   34.961291] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   36.397805] saa7133[0]: registered device video1 [v4l2]
[   36.397957] saa7133[0]: registered device vbi0
[   36.398101] saa7133[0]: registered device radio0
[   36.441009] dvb_init() allocating 1 frontend
[   36.617900] tda829x 8-004b: type set to tda8290
[   36.649959] tda18271 8-0060: attaching existing instance
[   36.649972] DVB: registering new adapter (saa7133[0])
[   36.649976] saa7134 0000:05:00.0: DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[   37.138602] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[   37.138628] saa7134 0000:05:00.0: firmware: failed to load dvb-fe-tda10048-1.0.fw (-2)
[   37.138631] saa7134 0000:05:00.0: Direct firmware load failed with error -2
[   37.138633] saa7134 0000:05:00.0: Falling back to user helper
[   37.793181] saa7134 ALSA driver for DMA sound loaded
[   37.793219] saa7133[0]/alsa: saa7133[0] at 0xf7d00000 irq 17 registered as card -1
[   54.206174] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   54.229212] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   54.265389] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[   54.288528] usb 6-1.8: 3:1: cannot get freq at ep 0x84
[ 1138.051874] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 1138.051902] saa7134 0000:05:00.0: firmware: failed to load dvb-fe-tda10048-1.0.fw (-2)
[ 1138.051906] saa7134 0000:05:00.0: Direct firmware load failed with error -2
[ 1138.051917] saa7134 0000:05:00.0: Falling back to user helper
[ 6885.864517] tda18271c2_rf_tracking_filters_correction: [8-0060|M] error -22 on line 278
[ 6885.912581] tda18271_calc_ir_measure: [8-0060|M] error -34 on line 686
[ 6885.912586] tda18271_calc_bp_filter: [8-0060|M] error -34 on line 618
[ 6885.912589] tda18271_calc_rf_band: [8-0060|M] error -34 on line 652
[ 6885.912592] tda18271_calc_gain_taper: [8-0060|M] error -34 on line 669
[ 6897.876434] tda18271c2_rf_tracking_filters_correction: [8-0060|M] error -22 on line 278
[ 6897.924509] tda18271_calc_ir_measure: [8-0060|M] error -34 on line 686
[ 6897.924514] tda18271_calc_bp_filter: [8-0060|M] error -34 on line 618
[ 6897.924516] tda18271_calc_rf_band: [8-0060|M] error -34 on line 652
[ 6897.924517] tda18271_calc_gain_taper: [8-0060|M] error -34 on line 669
alain@debian:~$
 



comme vous le voyez , j'ai encore de vilaines erreurs dans le dmesg .

comment les réparer sans tout casser ?

merci

je pense à :ça :

[ 1138.051874] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[ 1138.051902] saa7134 0000:05:00.0: firmware: failed to load dvb-fe-tda10048-1.0.fw (-2)
[ 1138.051906] saa7134 0000:05:00.0: Direct firmware load failed with error -2



comment réparer ?

Dernière modification par debian-alain (29-09-2016 11:42:52)

Hors ligne

#24 29-09-2016 11:54:36

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Stretch
Noyau : Linux 4.9.0-3-amd64
(G)UI : Mate 1.16
Inscription : 11-03-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

debian-alain a écrit :

merci les gars .


Ah zut ! même avec mon tux rose ? Y a que des gars comme membres ?

En ligne

#25 29-09-2016 12:20:32

èfpé
Membre
Inscription : 10-07-2016

Re : [Résolu] logiciels lecture/enregistrement vhs

Coucou les mecs,

@chalu : le bleu pour les garçons et le rose pour les filles... c'est 'très' récent tu sais wink

@debian-alain : rien de nouveau sous ta Debian... il te manque juste le firmware pour le tuner numérique (DVB-T/TNT) et ça c'est pas dans les dépôts Debian que tu le trouveras ; par contre c'est bien expliqué sur linuxtv.org (cf. topic d'origine).

Hors ligne

Pied de page des forums