Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 13-10-2016 09:55:51

pompier73
Membre
Lieu : Aude
Distrib. : Debian 8 "Jessie"
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome 3.14.1
Inscription : 13-10-2016

Boot sur mauvais écran [Résolu]

Bonjour,

Je viens d'installer Debian 8 "jessie" sur SSD.
J'ai 2 écrans l'un en VGA pour utilisation normale et l'autre HDMI vers la télé pour regarder des films.
Lorsque je démarre le grub s'affiche bien sur le moniteur VGA puis il devient gris et je dois allumer ma télé pour avoir accès au login et lancer Debian.
Une fois le lancement fait j'ai de nouveau accès sur mon moniteur VGA.
Peut-on et comment modifier cette particularité ?
Merci d'avance
Franck

Je reviens vers vous car je cherche une solution et peut être que ma carte graphique n'est pas reconnu correctement !
Après de nombreuses recherche j'ai identifié le modèle : Intel "xeon e3-1200 v2/3rd gen core processor graphics controller"
Résultat de commandes :

lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation H77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
 


lspci -n
00:00.0 0600: 8086:0150 (rev 09)
00:02.0 0300: 8086:0162 (rev 09)
00:14.0 0c03: 8086:1e31 (rev 04)
00:16.0 0780: 8086:1e3a (rev 04)
00:1a.0 0c03: 8086:1e2d (rev 04)
00:1b.0 0403: 8086:1e20 (rev 04)
00:1c.0 0604: 8086:1e10 (rev c4)
00:1c.4 0604: 8086:1e18 (rev c4)
00:1c.5 0604: 8086:1e1a (rev c4)
00:1c.6 0604: 8086:1e1c (rev c4)
00:1d.0 0c03: 8086:1e26 (rev 04)
00:1f.0 0601: 8086:1e4a (rev 04)
00:1f.2 0106: 8086:1e02 (rev 04)
00:1f.3 0c05: 8086:1e22 (rev 04)
02:00.0 0200: 10ec:8168 (rev 06)
03:00.0 0200: 10ec:8168 (rev 06)
04:00.0 0280: 8086:0887 (rev c4)


grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log
[     2.005] (II) Module intel: vendor="X.Org Foundation"
[     2.005]  compiled for 1.15.99.904, module version = 2.21.15
[     2.005]  Module class: X.Org Video Driver
--
[     2.006] (II) Module modesetting: vendor="X.Org Foundation"
[     2.006]  compiled for 1.16.4, module version = 0.9.0
[     2.006]  Module class: X.Org Video Driver
--
[     2.007] (II) Module fbdev: vendor="X.Org Foundation"
[     2.007]  compiled for 1.15.99.904, module version = 0.4.4
[     2.007]  Module class: X.Org Video Driver
--
[     2.007] (II) Module vesa: vendor="X.Org Foundation"
[     2.007]  compiled for 1.15.99.904, module version = 2.3.3
[     2.007]  Module class: X.Org Video Driver


lspci | grep "VGA compatible controller"
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
rfchastang@Poste-Fixe-Salon:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation H77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

Dernière modification par pompier73 (18-10-2016 10:26:58)

Hors ligne

#2 13-10-2016 13:00:33

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Boot sur mauvais écran [Résolu]

Bonjour
tu peut modifier ton post avec les balises "code" ou "code=root" ou "code=user" , voir au dessus d'ou tu poste la touche "code" avec menu déroulant.

le contenu de /var/log/Xorg.0.log peut etre interressant (avec la commande cat ou nano )
par exemple


cat /var/log/Xorg.0.log
 


et placer le retour ici

Dernière modification par robert2a (13-10-2016 13:01:14)

Hors ligne

#3 13-10-2016 14:04:57

pompier73
Membre
Lieu : Aude
Distrib. : Debian 8 "Jessie"
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome 3.14.1
Inscription : 13-10-2016

Re : Boot sur mauvais écran [Résolu]

robert2a a écrit :

Bonjour
tu peut modifier ton post avec les balises "code" ou "code=root" ou "code=user" , voir au dessus d'ou tu poste la touche "code" avec menu déroulant.

le contenu de /var/log/Xorg.0.log peut etre interressant (avec la commande cat ou nano )
par exemple


Bonjour,

Merci pour votre réponse j'ai mis les balises j'espère que c'est bon ! Voici le résultat de la commande:

cat /var/log/Xorg.0.log


[     1.972]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[     1.972] X Protocol Version 11, Revision 0
[     1.972] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     1.972] Current Operating System: Linux Poste-Fixe-Salon 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64
[     1.972] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/Poste--Fixe--Salon--vg-root ro quiet
[     1.972] Build Date: 11 February 2015  12:32:02AM
[     1.972] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[     1.972] Current version of pixman: 0.32.6
[     1.972]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     1.972] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     1.972] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 13 09:06:21 2016
[     1.974] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     1.977] (==) No Layout section.  Using the first Screen section.
[     1.977] (==) No screen section available. Using defaults.
[     1.977] (**) |-->Screen "Default Screen Section" (0)
[     1.977] (**) |   |-->Monitor "<default monitor>"
[     1.978] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     1.978] (==) Automatically adding devices
[     1.978] (==) Automatically enabling devices
[     1.978] (==) Automatically adding GPU devices
[     1.982] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     1.982]  Entry deleted from font path.
[     1.986] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     1.986] (==) ModulePath set to "/usr/lib/xorg/modules"
[     1.986] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     1.987] (II) Loader magic: 0x7f1c46f23d80
[     1.987] (II) Module ABI versions:
[     1.987]  X.Org ANSI C Emulation: 0.4
[     1.987]  X.Org Video Driver: 18.0
[     1.987]  X.Org XInput driver : 21.0
[     1.987]  X.Org Server Extension : 8.0
[     1.988] (II) xfree86: Adding drm device (/dev/dri/card0)
[     1.989] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[     1.989] (II) LoadModule: "glx"
[     1.991] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     2.000] (II) Module glx: vendor="X.Org Foundation"
[     2.000]  compiled for 1.16.4, module version = 1.0.0
[     2.000]  ABI class: X.Org Server Extension, version 8.0
[     2.000] (==) AIGLX enabled
[     2.000] (==) Matched intel as autoconfigured driver 0
[     2.000] (==) Matched intel as autoconfigured driver 1
[     2.000] (==) Matched modesetting as autoconfigured driver 2
[     2.000] (==) Matched fbdev as autoconfigured driver 3
[     2.000] (==) Matched vesa as autoconfigured driver 4
[     2.000] (==) Assigned the driver to the xf86ConfigLayout
[     2.000] (II) LoadModule: "intel"
[     2.002] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     2.005] (II) Module intel: vendor="X.Org Foundation"
[     2.005]  compiled for 1.15.99.904, module version = 2.21.15
[     2.005]  Module class: X.Org Video Driver
[     2.005]  ABI class: X.Org Video Driver, version 18.0
[     2.005] (II) LoadModule: "modesetting"
[     2.006] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     2.006] (II) Module modesetting: vendor="X.Org Foundation"
[     2.006]  compiled for 1.16.4, module version = 0.9.0
[     2.006]  Module class: X.Org Video Driver
[     2.006]  ABI class: X.Org Video Driver, version 18.0
[     2.006] (II) LoadModule: "fbdev"
[     2.006] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     2.007] (II) Module fbdev: vendor="X.Org Foundation"
[     2.007]  compiled for 1.15.99.904, module version = 0.4.4
[     2.007]  Module class: X.Org Video Driver
[     2.007]  ABI class: X.Org Video Driver, version 18.0
[     2.007] (II) LoadModule: "vesa"
[     2.007] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     2.007] (II) Module vesa: vendor="X.Org Foundation"
[     2.007]  compiled for 1.15.99.904, module version = 2.3.3
[     2.007]  Module class: X.Org Video Driver
[     2.007]  ABI class: X.Org Video Driver, version 18.0
[     2.007] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[     2.008] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     2.008] (II) FBDEV: driver for framebuffer: fbdev
[     2.008] (II) VESA: driver for VESA chipsets: vesa
[     2.008] (++) using VT number 7

[     2.010] (WW) Falling back to old probe method for modesetting
[     2.010] (WW) Falling back to old probe method for fbdev
[     2.010] (II) Loading sub module "fbdevhw"
[     2.010] (II) LoadModule: "fbdevhw"
[     2.010] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     2.011] (II) Module fbdevhw: vendor="X.Org Foundation"
[     2.011]  compiled for 1.16.4, module version = 0.0.2
[     2.011]  ABI class: X.Org Video Driver, version 18.0
[     2.011] (WW) Falling back to old probe method for vesa
[     2.011] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     2.011] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     2.011] (==) intel(0): RGB weight 888
[     2.011] (==) intel(0): Default visual is TrueColor
[     2.011] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[     2.011] (**) intel(0): Relaxed fencing enabled
[     2.011] (**) intel(0): Wait on SwapBuffers? enabled
[     2.011] (**) intel(0): Triple buffering? enabled
[     2.011] (**) intel(0): Framebuffer tiled
[     2.011] (**) intel(0): Pixmaps tiled
[     2.011] (**) intel(0): 3D buffers tiled
[     2.011] (**) intel(0): SwapBuffers wait enabled
[     2.011] (==) intel(0): video overlay key set to 0x101fe
[     2.012] (II) intel(0): Output VGA1 has no monitor section
[     2.038] (II) intel(0): Output HDMI1 has no monitor section
[     2.092] (II) intel(0): Output DP1 has no monitor section
[     2.092] (II) intel(0): Output HDMI2 has no monitor section
[     2.144] (II) intel(0): Output HDMI3 has no monitor section
[     2.144] (II) intel(0): Output DP2 has no monitor section
[     2.200] (II) intel(0): Output DP3 has no monitor section
[     2.200] (II) intel(0): EDID for output VGA1
[     2.200] (II) intel(0): Printing probed modes for output VGA1
[     2.200] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     2.200] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     2.200] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     2.200] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[     2.200] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[     2.227] (II) intel(0): EDID for output HDMI1
[     2.280] (II) intel(0): EDID for output DP1
[     2.280] (II) intel(0): EDID for output HDMI2
[     2.330] (II) Quirked EDID physical size to 0x0 cm
[     2.330] (II) intel(0): EDID for output HDMI3
[     2.330] (II) intel(0): Manufacturer: GSM  Model: 1  Serial#: 16843009
[     2.330] (II) intel(0): Year: 2011  Week: 1
[     2.330] (II) intel(0): EDID Version: 1.3
[     2.330] (II) intel(0): Digital Display Input
[     2.330] (II) intel(0): Indeterminate output size
[     2.330] (II) intel(0): Gamma: 2.20
[     2.330] (II) intel(0): No DPMS capabilities specified
[     2.330] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     2.330] (II) intel(0): First detailed timing is preferred mode
[     2.330] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[     2.330] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[     2.330] (II) intel(0): Supported established timings:
[     2.330] (II) intel(0): 720x400@70Hz
[     2.330] (II) intel(0): 640x480@60Hz
[     2.331] (II) intel(0): 800x600@60Hz
[     2.331] (II) intel(0): 1024x768@60Hz
[     2.331] (II) intel(0): Manufacturer's mask: 0
[     2.331] (II) intel(0): Supported standard timings:
[     2.331] (II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     2.331] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     2.331] (II) intel(0): Supported detailed timing:
[     2.331] (II) intel(0): clock: 148.5 MHz   Image Size:  160 x 90 mm
[     2.331] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     2.331] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     2.331] (II) intel(0): Supported detailed timing:
[     2.331] (II) intel(0): clock: 84.8 MHz   Image Size:  160 x 90 mm
[     2.331] (II) intel(0): h_active: 1360  h_sync: 1432  h_sync_end 1568 h_blank_end 1776 h_border: 0
[     2.331] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 798 v_border: 0
[     2.331] (II) intel(0): Ranges: V min: 58 V max: 62 Hz, H min: 30 H max: 83 kHz, PixClock max 165 MHz
[     2.331] (II) intel(0): Monitor name: LG TV
[     2.331] (II) intel(0): Supported detailed timing:
[     2.331] (II) intel(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
[     2.331] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     2.331] (II) intel(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[     2.331] (II) intel(0): Supported detailed timing:
[     2.331] (II) intel(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
[     2.331] (II) intel(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[     2.331] (II) intel(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[     2.331] (II) intel(0): Supported detailed timing:
[     2.331] (II) intel(0): clock: 148.5 MHz   Image Size:  160 x 90 mm
[     2.331] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[     2.331] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[     2.331] (II) intel(0): Supported detailed timing:
[     2.331] (II) intel(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
[     2.331] (II) intel(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[     2.331] (II) intel(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[     2.331] (II) intel(0): Number of EDID sections to follow: 1
[     2.331] (II) intel(0): EDID (in hex):
[     2.331] (II) intel(0):   00ffffffffffff001e6d010001010101
[     2.331] (II) intel(0):   01150103801009780aee91a3544c9926
[     2.331] (II) intel(0):   0f5054a10800714f8180010101010101
[     2.331] (II) intel(0):   010101010101023a801871382d40582c
[     2.331] (II) intel(0):   4500a05a0000001e1b2150a051001e30
[     2.331] (II) intel(0):   48883500a05a0000001c000000fd003a
[     2.331] (II) intel(0):   3e1e5310000a202020202020000000fc
[     2.331] (II) intel(0):   004c472054560a2020202020202001e2
[     2.331] (II) intel(0):   020326f14e101f841305140302122021
[     2.331] (II) intel(0):   2215012615075009570767030c002000
[     2.331] (II) intel(0):   b82de3050301011d8018711c1620582c
[     2.331] (II) intel(0):   2500a05a0000009e011d007251d01e20
[     2.331] (II) intel(0):   6e285500a05a0000001e023a80187138
[     2.331] (II) intel(0):   2d40582c4500a05a0000001e011d00bc
[     2.331] (II) intel(0):   52d01e20b8285540a05a0000001e0000
[     2.331] (II) intel(0):   00000000000000000000000000000089
[     2.331] (--) intel(0): HDMI max TMDS frequency 225000KHz
[     2.331] (II) intel(0): Printing probed modes for output HDMI3
[     2.331] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     2.331] (II) intel(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[     2.331] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     2.331] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 776 798 -hsync +vsync (47.7 kHz e)
[     2.331] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     2.331] (II) intel(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     2.331] (II) intel(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[     2.331] (II) intel(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     2.331] (II) intel(0): Modeline "1440x576i"x50.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[     2.331] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     2.331] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     2.331] (II) intel(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[     2.331] (II) intel(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     2.331] (II) intel(0): EDID for output DP2
[     2.388] (II) intel(0): EDID for output DP3
[     2.388] (II) intel(0): Output VGA1 connected
[     2.388] (II) intel(0): Output HDMI1 disconnected
[     2.388] (II) intel(0): Output DP1 disconnected
[     2.388] (II) intel(0): Output HDMI2 disconnected
[     2.388] (II) intel(0): Output HDMI3 connected
[     2.388] (II) intel(0): Output DP2 disconnected
[     2.388] (II) intel(0): Output DP3 disconnected
[     2.388] (II) intel(0): Using fuzzy aspect match for initial modes
[     2.388] (II) intel(0): Output VGA1 using initial mode 1024x768
[     2.388] (II) intel(0): Output HDMI3 using initial mode 1024x768
[     2.388] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     2.388] (II) intel(0): Kernel page flipping support detected, enabling
[     2.388] (==) intel(0): DPI set to (96, 96)
[     2.388] (II) Loading sub module "fb"
[     2.388] (II) LoadModule: "fb"
[     2.388] (II) Loading /usr/lib/xorg/modules/libfb.so
[     2.390] (II) Module fb: vendor="X.Org Foundation"
[     2.390]  compiled for 1.16.4, module version = 1.0.0
[     2.390]  ABI class: X.Org ANSI C Emulation, version 0.4
[     2.390] (II) Loading sub module "dri2"
[     2.390] (II) LoadModule: "dri2"
[     2.390] (II) Module "dri2" already built-in
[     2.390] (II) UnloadModule: "modesetting"
[     2.390] (II) Unloading modesetting
[     2.390] (II) UnloadModule: "fbdev"
[     2.390] (II) Unloading fbdev
[     2.390] (II) UnloadSubModule: "fbdevhw"
[     2.390] (II) Unloading fbdevhw
[     2.390] (II) UnloadModule: "vesa"
[     2.390] (II) Unloading vesa
[     2.390] (==) Depth 24 pixmap format is 32 bpp
[     2.391] (II) intel(0): [DRI2] Setup complete
[     2.391] (II) intel(0): [DRI2]   DRI driver: i965
[     2.391] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[     2.393] (II) UXA(0): Driver registered support for the following operations:
[     2.393] (II)         solid
[     2.393] (II)         copy
[     2.393] (II)         composite (RENDER acceleration)
[     2.393] (II)         put_image
[     2.393] (II)         get_image
[     2.393] (==) intel(0): Backing store enabled
[     2.393] (==) intel(0): Silken mouse enabled
[     2.393] (II) intel(0): Initializing HW Cursor
[     2.393] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     2.394] (==) intel(0): DPMS enabled
[     2.394] (==) intel(0): Intel XvMC decoder enabled
[     2.394] (II) intel(0): Set up textured video
[     2.394] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[     2.394] (II) intel(0): direct rendering: DRI2 Enabled
[     2.394] (==) intel(0): hotplug detection: "enabled"
[     2.468] (--) RandR disabled
[     2.473] (II) SELinux: Disabled on system
[     2.500] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     2.500] (II) AIGLX: enabled GLX_ARB_create_context
[     2.500] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     2.500] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     2.500] (II) AIGLX: enabled GLX_INTEL_swap_event
[     2.500] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     2.500] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     2.500] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     2.500] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     2.500] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     2.501] (II) AIGLX: Loaded and initialized i965
[     2.501] (II) GLX: Initialized DRI2 GL provider for screen 0
[     2.501] (II) intel(0): Setting screen physical size to 270 x 203
[     2.539] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     2.540] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     2.540] (II) LoadModule: "evdev"
[     2.540] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     2.542] (II) Module evdev: vendor="X.Org Foundation"
[     2.542]  compiled for 1.16.0, module version = 2.9.0
[     2.542]  Module class: X.Org XInput Driver
[     2.542]  ABI class: X.Org XInput driver, version 21.0
[     2.542] (II) Using input driver 'evdev' for 'Power Button'
[     2.542] (**) Power Button: always reports core events
[     2.542] (**) evdev: Power Button: Device: "/dev/input/event1"
[     2.542] (--) evdev: Power Button: Vendor 0 Product 0x1
[     2.542] (--) evdev: Power Button: Found keys
[     2.542] (II) evdev: Power Button: Configuring as keyboard
[     2.542] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event1"
[     2.542] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     2.542] (**) Option "xkb_rules" "evdev"
[     2.542] (**) Option "xkb_model" "pc105"
[     2.542] (**) Option "xkb_layout" "fr"
[     2.542] (**) Option "xkb_variant" "latin9"
[     2.565] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     2.565] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     2.565] (II) Using input driver 'evdev' for 'Video Bus'
[     2.565] (**) Video Bus: always reports core events
[     2.565] (**) evdev: Video Bus: Device: "/dev/input/event13"
[     2.565] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     2.565] (--) evdev: Video Bus: Found keys
[     2.565] (II) evdev: Video Bus: Configuring as keyboard
[     2.565] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event13"
[     2.565] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     2.565] (**) Option "xkb_rules" "evdev"
[     2.565] (**) Option "xkb_model" "pc105"
[     2.565] (**) Option "xkb_layout" "fr"
[     2.565] (**) Option "xkb_variant" "latin9"
[     2.565] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     2.565] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     2.565] (II) Using input driver 'evdev' for 'Power Button'
[     2.565] (**) Power Button: always reports core events
[     2.565] (**) evdev: Power Button: Device: "/dev/input/event0"
[     2.565] (--) evdev: Power Button: Vendor 0 Product 0x1
[     2.565] (--) evdev: Power Button: Found keys
[     2.565] (II) evdev: Power Button: Configuring as keyboard
[     2.565] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event0"
[     2.565] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     2.565] (**) Option "xkb_rules" "evdev"
[     2.565] (**) Option "xkb_model" "pc105"
[     2.565] (**) Option "xkb_layout" "fr"
[     2.565] (**) Option "xkb_variant" "latin9"
[     2.566] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event14)
[     2.566] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[     2.566] (II) Using input driver 'evdev' for 'PixArt Microsoft USB Optical Mouse'
[     2.566] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[     2.566] (**) evdev: PixArt Microsoft USB Optical Mouse: Device: "/dev/input/event14"
[     2.566] (--) evdev: PixArt Microsoft USB Optical Mouse: Vendor 0x45e Product 0xcb
[     2.566] (--) evdev: PixArt Microsoft USB Optical Mouse: Found 3 mouse buttons
[     2.566] (--) evdev: PixArt Microsoft USB Optical Mouse: Found scroll wheel(s)
[     2.566] (--) evdev: PixArt Microsoft USB Optical Mouse: Found relative axes
[     2.566] (--) evdev: PixArt Microsoft USB Optical Mouse: Found x and y relative axes
[     2.566] (II) evdev: PixArt Microsoft USB Optical Mouse: Configuring as mouse
[     2.566] (II) evdev: PixArt Microsoft USB Optical Mouse: Adding scrollwheel support
[     2.566] (**) evdev: PixArt Microsoft USB Optical Mouse: YAxisMapping: buttons 4 and 5
[     2.566] (**) evdev: PixArt Microsoft USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     2.566] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:045E:00CB.0001/input/input17/event14"
[     2.566] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 9)
[     2.566] (II) evdev: PixArt Microsoft USB Optical Mouse: initialized for relative axes.
[     2.566] (**) PixArt Microsoft USB Optical Mouse: (accel) keeping acceleration scheme 1
[     2.566] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration profile 0
[     2.566] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[     2.566] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[     2.566] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[     2.566] (II) No input driver specified, ignoring this device.
[     2.566] (II) This device may have been added with another device file.
[     2.566] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event15)
[     2.567] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[     2.567] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[     2.567] (**) Microsoft Wired Keyboard 600: always reports core events
[     2.567] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event15"
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x7f8
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[     2.567] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[     2.567] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:07F8.0002/input/input18/event15"
[     2.567] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[     2.567] (**) Option "xkb_rules" "evdev"
[     2.567] (**) Option "xkb_model" "pc105"
[     2.567] (**) Option "xkb_layout" "fr"
[     2.567] (**) Option "xkb_variant" "latin9"
[     2.567] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event16)
[     2.567] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[     2.567] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[     2.567] (**) Microsoft Wired Keyboard 600: always reports core events
[     2.567] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event16"
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x7f8
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[     2.567] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[     2.567] (II) evdev: Microsoft Wired Keyboard 600: Forcing absolute x/y axes to exist.
[     2.567] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[     2.567] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[     2.567] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[     2.567] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[     2.567] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[     2.567] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     2.567] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:045E:07F8.0003/input/input19/event16"
[     2.567] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 11)
[     2.567] (**) Option "xkb_rules" "evdev"
[     2.567] (**) Option "xkb_model" "pc105"
[     2.567] (**) Option "xkb_layout" "fr"
[     2.567] (**) Option "xkb_variant" "latin9"
[     2.567] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[     2.567] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[     2.567] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[     2.567] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[     2.567] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[     2.567] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[     2.568] (II) config/udev: Adding input device USB Video Camera (/dev/input/event17)
[     2.568] (**) USB Video Camera: Applying InputClass "evdev keyboard catchall"
[     2.568] (II) Using input driver 'evdev' for 'USB Video Camera'
[     2.568] (**) USB Video Camera: always reports core events
[     2.568] (**) evdev: USB Video Camera: Device: "/dev/input/event17"
[     2.568] (--) evdev: USB Video Camera: Vendor 0x471 Product 0x333
[     2.568] (--) evdev: USB Video Camera: Found keys
[     2.568] (II) evdev: USB Video Camera: Configuring as keyboard
[     2.568] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/input/input20/event17"
[     2.568] (II) XINPUT: Adding extended input device "USB Video Camera" (type: KEYBOARD, id 12)
[     2.568] (**) Option "xkb_rules" "evdev"
[     2.568] (**) Option "xkb_model" "pc105"
[     2.568] (**) Option "xkb_layout" "fr"
[     2.568] (**) Option "xkb_variant" "latin9"
[     2.568] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[     2.568] (II) No input driver specified, ignoring this device.
[     2.568] (II) This device may have been added with another device file.
[     2.568] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event7)
[     2.568] (II) No input driver specified, ignoring this device.
[     2.568] (II) This device may have been added with another device file.
[     2.568] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[     2.568] (II) No input driver specified, ignoring this device.
[     2.568] (II) This device may have been added with another device file.
[     2.568] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[     2.568] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.569] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[     2.569] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.569] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[     2.569] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.569] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[     2.569] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.569] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[     2.569] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.569] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[     2.569] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.569] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event6)
[     2.569] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.569] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[     2.569] (II) No input driver specified, ignoring this device.
[     2.569] (II) This device may have been added with another device file.
[     2.572] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[     2.616] (II) evdev: PixArt Microsoft USB Optical Mouse: Close
[     2.616] (II) UnloadModule: "evdev"
[     2.616] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event14)
[     2.616] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[     2.616] (II) Using input driver 'evdev' for 'PixArt Microsoft USB Optical Mouse'
[     2.616] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[     2.616] (**) evdev: PixArt Microsoft USB Optical Mouse: Device: "/dev/input/event14"
[     2.616] (--) evdev: PixArt Microsoft USB Optical Mouse: Vendor 0x45e Product 0xcb
[     2.616] (--) evdev: PixArt Microsoft USB Optical Mouse: Found 3 mouse buttons
[     2.616] (--) evdev: PixArt Microsoft USB Optical Mouse: Found scroll wheel(s)
[     2.616] (--) evdev: PixArt Microsoft USB Optical Mouse: Found relative axes
[     2.616] (--) evdev: PixArt Microsoft USB Optical Mouse: Found x and y relative axes
[     2.616] (II) evdev: PixArt Microsoft USB Optical Mouse: Configuring as mouse
[     2.616] (II) evdev: PixArt Microsoft USB Optical Mouse: Adding scrollwheel support
[     2.616] (**) evdev: PixArt Microsoft USB Optical Mouse: YAxisMapping: buttons 4 and 5
[     2.616] (**) evdev: PixArt Microsoft USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     2.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:045E:00CB.0001/input/input17/event14"
[     2.616] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 9)
[     2.616] (II) evdev: PixArt Microsoft USB Optical Mouse: initialized for relative axes.
[     2.616] (**) PixArt Microsoft USB Optical Mouse: (accel) keeping acceleration scheme 1
[     2.616] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration profile 0
[     2.616] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[     2.616] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[     2.617] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[     2.617] (II) No input driver specified, ignoring this device.
[     2.617] (II) This device may have been added with another device file.
[     2.617] (II) config/udev: removing device USB Video Camera
[     2.640] (II) evdev: USB Video Camera: Close
[     2.640] (II) UnloadModule: "evdev"
[     2.641] (II) config/udev: Adding input device USB Video Camera (/dev/input/event17)
[     2.641] (**) USB Video Camera: Applying InputClass "evdev keyboard catchall"
[     2.641] (II) Using input driver 'evdev' for 'USB Video Camera'
[     2.641] (**) USB Video Camera: always reports core events
[     2.641] (**) evdev: USB Video Camera: Device: "/dev/input/event17"
[     2.641] (--) evdev: USB Video Camera: Vendor 0x471 Product 0x333
[     2.641] (--) evdev: USB Video Camera: Found keys
[     2.641] (II) evdev: USB Video Camera: Configuring as keyboard
[     2.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/input/input20/event17"
[     2.641] (II) XINPUT: Adding extended input device "USB Video Camera" (type: KEYBOARD, id 12)
[     2.641] (**) Option "xkb_rules" "evdev"
[     2.641] (**) Option "xkb_model" "pc105"
[     2.641] (**) Option "xkb_layout" "fr"
[     2.641] (**) Option "xkb_variant" "latin9"
[     2.641] (II) config/udev: removing device Microsoft Wired Keyboard 600
[     2.678] (II) evdev: Microsoft Wired Keyboard 600: Close
[     2.678] (II) UnloadModule: "evdev"
[     2.678] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event16)
[     2.678] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[     2.678] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[     2.678] (**) Microsoft Wired Keyboard 600: always reports core events
[     2.678] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event16"
[     2.678] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x7f8
[     2.678] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[     2.678] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[     2.678] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[     2.678] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[     2.678] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[     2.678] (II) evdev: Microsoft Wired Keyboard 600: Forcing absolute x/y axes to exist.
[     2.678] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[     2.678] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[     2.678] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[     2.678] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[     2.678] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[     2.678] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     2.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:045E:07F8.0003/input/input19/event16"
[     2.678] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 11)
[     2.678] (**) Option "xkb_rules" "evdev"
[     2.678] (**) Option "xkb_model" "pc105"
[     2.678] (**) Option "xkb_layout" "fr"
[     2.678] (**) Option "xkb_variant" "latin9"
[     2.679] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[     2.679] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[     2.679] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[     2.679] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[     2.679] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[     2.679] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[     2.679] (II) config/udev: removing device Microsoft Wired Keyboard 600
[     2.708] (II) evdev: Microsoft Wired Keyboard 600: Close
[     2.708] (II) UnloadModule: "evdev"
[     2.708] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event15)
[     2.708] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[     2.708] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[     2.708] (**) Microsoft Wired Keyboard 600: always reports core events
[     2.708] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event15"
[     2.708] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x7f8
[     2.708] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[     2.708] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[     2.708] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:045E:07F8.0002/input/input18/event15"
[     2.708] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[     2.708] (**) Option "xkb_rules" "evdev"
[     2.708] (**) Option "xkb_model" "pc105"
[     2.708] (**) Option "xkb_layout" "fr"
[     2.708] (**) Option "xkb_variant" "latin9"
[     3.342] (II) Quirked EDID physical size to 0x0 cm
[     3.342] (--) intel(0): HDMI max TMDS frequency 225000KHz
[     3.429] (II) intel(0): Allocated new frame buffer 2944x1080 stride 11776, tiled
[     4.330] (II) Quirked EDID physical size to 0x0 cm
[     4.330] (--) intel(0): HDMI max TMDS frequency 225000KHz
[    65.878] (II) Quirked EDID physical size to 0x0 cm
[    65.878] (--) intel(0): HDMI max TMDS frequency 225000KHz
[    66.021] (II) intel(0): Allocated new frame buffer 2048x768 stride 8192, tiled
[    66.920] (II) Quirked EDID physical size to 0x0 cm
[    66.920] (--) intel(0): HDMI max TMDS frequency 225000KHz
[    81.210] (II) Quirked EDID physical size to 0x0 cm
[    81.210] (--) intel(0): HDMI max TMDS frequency 225000KHz
[   288.258] (II) Quirked EDID physical size to 0x0 cm
[   288.258] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  7705.971] (II) Quirked EDID physical size to 0x0 cm
[  7705.971] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  7706.162] (II) Quirked EDID physical size to 0x0 cm
[  7706.162] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  7706.358] (II) Quirked EDID physical size to 0x0 cm
[  7706.358] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  8373.062] (II) Quirked EDID physical size to 0x0 cm
[  8373.062] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  8447.726] (II) Quirked EDID physical size to 0x0 cm
[  8447.727] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  8447.914] (II) Quirked EDID physical size to 0x0 cm
[  8447.915] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  8448.102] (II) Quirked EDID physical size to 0x0 cm
[  8448.102] (--) intel(0): HDMI max TMDS frequency 225000KHz
[  8487.424] (II) config/udev: removing device USB Video Camera
[  8487.439] (II) evdev: USB Video Camera: Close
[  8487.442] (II) UnloadModule: "evdev"
[ 11940.105] (II) config/udev: Adding input device USB Video Camera (/dev/input/event17)
[ 11940.105] (**) USB Video Camera: Applying InputClass "evdev keyboard catchall"
[ 11940.105] (II) Using input driver 'evdev' for 'USB Video Camera'
[ 11940.105] (**) USB Video Camera: always reports core events
[ 11940.105] (**) evdev: USB Video Camera: Device: "/dev/input/event17"
[ 11940.105] (--) evdev: USB Video Camera: Vendor 0x471 Product 0x333
[ 11940.105] (--) evdev: USB Video Camera: Found keys
[ 11940.105] (II) evdev: USB Video Camera: Configuring as keyboard
[ 11940.105] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.4/1-3.4:1.0/input/input21/event17"
[ 11940.105] (II) XINPUT: Adding extended input device "USB Video Camera" (type: KEYBOARD, id 12)
[ 11940.105] (**) Option "xkb_rules" "evdev"
[ 11940.105] (**) Option "xkb_model" "pc105"
[ 11940.105] (**) Option "xkb_layout" "fr"
[ 11940.105] (**) Option "xkb_variant" "latin9"
[ 12069.438] (II) Quirked EDID physical size to 0x0 cm
[ 12069.438] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 12069.626] (II) Quirked EDID physical size to 0x0 cm
[ 12069.626] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 12069.814] (II) Quirked EDID physical size to 0x0 cm
[ 12069.814] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 17045.998] (II) Quirked EDID physical size to 0x0 cm
[ 17045.998] (--) intel(0): HDMI max TMDS frequency 225000KHz



Edit à toto :
Mis la balise commande user en conformité séparé de son retour.

Hors ligne

#4 13-10-2016 19:15:25

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Boot sur mauvais écran [Résolu]

Bonsoir
voici les sorties disponibles pour les moniteurs


[     2.388] (II) intel(0): Output VGA1 connected
[     2.388] (II) intel(0): Output HDMI1 disconnected
[     2.388] (II) intel(0): Output DP1 disconnected
[     2.388] (II) intel(0): Output HDMI2 disconnected
[     2.388] (II) intel(0): Output HDMI3 connected
[     2.388] (II) intel(0): Output DP2 disconnected
[     2.388] (II) intel(0): Output DP3 disconnected
 



pour moi ton driver est correct


[     2.390] (==) Depth 24 pixmap format is 32 bpp
[     2.391] (II) intel(0): [DRI2] Setup complete
[     2.391] (II) intel(0): [DRI2]   DRI driver: i965
[     2.391] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[     2.393] (II) UXA(0): Driver registered support for the following operations:
[     2.393] (II)         solid
[     2.393] (II)         copy
[     2.393] (II)         composite (RENDER acceleration)
[     2.393] (II)         put_image
[     2.393] (II)         get_image
[     2.393] (==) intel(0): Backing store enabled
[     2.393] (==) intel(0): Silken mouse enabled
[     2.393] (II) intel(0): Initializing HW Cursor
[     2.393] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     2.394] (==) intel(0): DPMS enabled
[     2.394] (==) intel(0): Intel XvMC decoder enabled
[     2.394] (II) intel(0): Set up textured video
[     2.394] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[     2.394] (II) intel(0): direct rendering: DRI2 Enabled
[     2.394] (==) intel(0): hotplug detection: "enabled"
[     2.468] (--) RandR disabled
[     2.473] (II) SELinux: Disabled on system
[     2.500] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     2.500] (II) AIGLX: enabled GLX_ARB_create_context
[     2.500] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     2.500] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     2.500] (II) AIGLX: enabled GLX_INTEL_swap_event
[     2.500] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     2.500] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     2.500] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     2.500] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     2.500] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     2.501] (II) AIGLX: Loaded and initialized i965
[     2.501] (II) GLX: Initialized DRI2 GL provider for screen 0
[     2.501] (II) intel(0): Setting screen physical size to 270 x 203
 


j'aimerai que tu fasse un essaie , cable hdmi débranché du pc et télé éteinte , le démarrage est correct ?

tu parle de grub , donc je suppose la sélection de l os a lancer et puis l écran s'éteint direct ou tu voit le nettoyage des fichiers linux (ensuite selon les machines l'écran est noir) puis l écran de logging
ou en plus clair a quel moment l écran du pc s'éteint et a quel moment la télé prend le relais

ps: comme tu le décrit ça ressemble a un probléme de résolution (écran gris )
je te cite :  => Lorsque je démarre le grub s'affiche bien sur le moniteur VGA puis il devient gris et je dois allumer ma télé pour avoir accès au login et lancer Debian.

ce que je comprend pas c'est bien avant le serveur X (donc résolution native de grub)  puis au logging sur la télé résolution du serveur X , puis sur le bureau c'est correct sur l'écran du PC
j'avoue etre un peu perdu la  tongue

le driver est actif des l invite de logging graphique , avant tu est sur une résolution "mode dos" normalement donné par grub (ce le faire confirmer par un barbu )

une autre question , le model , la marque de ton écran VGA , c'est un lcd combien de pouces ?

autre question , je suppose un pc bureau ? , donc les sorties video sur ta carte mere , tu a autant de connecteurs ?   (1 vga , 3 hdmi et 3 dp ) au total 7 connecteurs ça fait beaucoup pour une vidéo intégré hmm
en plus hdmi3 , si tu a un autre connecteur teste le

Dernière modification par robert2a (13-10-2016 19:45:34)

Hors ligne

#5 14-10-2016 09:23:04

pompier73
Membre
Lieu : Aude
Distrib. : Debian 8 "Jessie"
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome 3.14.1
Inscription : 13-10-2016

Re : Boot sur mauvais écran [Résolu]

j'aimerai que tu fasse un essaie , cable hdmi débranché du pc et télé éteinte , le démarrage est correct ?

Oui si le câble HDMI est débranché le démarrage se fait normalement

tu parle de grub , donc je suppose la sélection de l os a lancer et puis l écran s'éteint direct ou tu voit le nettoyage des fichiers linux (ensuite selon les machines l'écran est noir) puis l écran de logging
ou en plus clair a quel moment l écran du pc s'éteint et a quel moment la télé prend le relais

Lorsque je démarre la machine l'écran s'affiche sur la sortie DVI, je sélectionne Linux ou il se lance tout seul au bout de qq secondes. Je vois effectivement quelques lignes de commandes puis l''écran de vient gris et je n'ai plus accès au logging.
J'ai testé un truc lorsque je suis devant cet écran; à l'aveugle j'appuie sur la touche entrée, je saisis mon mot de passe puis je valide et ça démarre

le model , la marque de ton écran VGA , c'est un lcd combien de pouces ?

L'écran est un écran basique de 19'' marque Asus et la télé LED de 40'' maruqe LG

autre question , je suppose un pc bureau ? , donc les sorties video sur ta carte mere , tu a autant de connecteurs ?   (1 vga , 3 hdmi et 3 dp ) au total 7 connecteurs ça fait beaucoup pour une vidéo intégré hmm
C'est bien un PC de bureau; en natif sur la carte il y a 1 sortie DVI et 2 sorties HDMI. Toutes les 3 sont fonctionnelles !

Hors ligne

#6 14-10-2016 17:27:54

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Boot sur mauvais écran [Résolu]

en première idée , je pense au kernel qui prend la définition native de l'écran , mais surement de la télé (ce qui perturbe le vga )

pour le vga de 19 pouces c'est pas un cathodique ? mais un vieux lcd ?  voir sa définition max (ou native )

juste apres le nettoyage ( au début du boot ) le noyau prend la main en fonction du driver libre (si tu n'a pas de driver , c'est une définition basique de grub je pense )
donc ce qui explique ton souci
le driver intel ne se charge que juste avant l'invite de logging graphique

par contre je sais pas comment on peut régler ça , si tu a l occasion d'avoir pour test un écran plus performant ça peut régler le probleme (si ce n'est pas la sortie vga de la CM qui bride la définition maximum )

peut etre aussi voir les définitions max des sorties hdmi et vga (cartes vidéo intel ) , idem pour les écrans

par contre pourquoi le noyau fait ça , je sais pas .

ce ne sont que des idées en fonction de ce que tu décrit , l'utilisation des 2 HDMI a la place de vga/hdmi mais ça impose le remplacement du moniteur 19 hmm

ps: regarder sur la doc de la carte mere aussi le nombre d'écran max utilisable en meme temps

ceci est intéressant (de ton fichier Xorg.0.log )


[     2.200] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)  => ce serait la définition native (pour un lcd 19 c'est pas beaucoup  :P  )
[     2.200] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     2.200] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     2.200] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[     2.200] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
 



et pour la télé


[     2.331] (--) intel(0): HDMI max TMDS frequency 225000KHz
[     2.331] (II) intel(0): Printing probed modes for output HDMI3
[     2.331] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[     2.331] (II) intel(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[     2.331] (II) intel(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[     2.331] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[     2.331] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 776 798 -hsync +vsync (47.7 kHz e)
[     2.331] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     2.331] (II) intel(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     2.331] (II) intel(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[     2.331] (II) intel(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[     2.331] (II) intel(0): Modeline "1440x576i"x50.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[     2.331] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     2.331] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     2.331] (II) intel(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[     2.331] (II) intel(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     2.331] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
 


ceci te donne une idée des définitions max (télé et moniteur )  que le serveur X détecte
ceci pour le serveur X , alors que ton soucis est avant , au démarrage

tu a testé l autre connecteur HDMI disponible ?

ps: voir si une option du bios pour la mémoire alloué a la carte vidéo (enfin l Apu du processeur )

si cela peut te guider dans tes recherches ou donner une idée a un autre membre pour la solution  wink

nota: il y a aussi la version du noyau et du driver intel (jessie => stretch => sid ) mais la j y crois pas trop , en plus tout est bien chargé sans erreur .

Dernière modification par robert2a (14-10-2016 17:51:02)

Hors ligne

#7 18-10-2016 07:36:15

pompier73
Membre
Lieu : Aude
Distrib. : Debian 8 "Jessie"
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome 3.14.1
Inscription : 13-10-2016

Re : Boot sur mauvais écran [Résolu]

Merci pour votre aide !
Donc si tout se charge c'est donc bien un problème matériel...

Hors ligne

#8 18-10-2016 08:07:06

trentanel
Membre
Lieu : Comtat Venaissin
Distrib. : Raspbian jessie
(G)UI : xfce
Inscription : 17-09-2016

Re : Boot sur mauvais écran [Résolu]

Bonjour,

J'ai testé un truc lorsque je suis devant cet écran; à l'aveugle j'appuie sur la touche entrée, je saisis mon mot de passe puis je valide et ça démarre

Cela me semble être la confirmation du fait que les deux écrans sont en mode "clone". Ils affichent la même chose.
Si l'écran en DVI n'affiche que "du gris", c'est certainement parce qu'il est paramétré à la même définition que l'écran HDMI et qu'il ne le supporte pas ou que le pilote en fonction ne peut pas la gérer.

Ceci n'est qu'une supposition. Mais une fois la machine lancée, tu pourrais vérifier comment tu as paramétré l'affichage de chaque écran.

Dernière modification par trentanel (18-10-2016 08:07:34)

Hors ligne

#9 18-10-2016 10:00:12

pompier73
Membre
Lieu : Aude
Distrib. : Debian 8 "Jessie"
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome 3.14.1
Inscription : 13-10-2016

Re : Boot sur mauvais écran [Résolu]

J'ai réinstallé et maintenant le boot est sur le bon écran !!!!
mystère...
Comment marquer le sujet résolu ?

Dernière modification par pompier73 (18-10-2016 10:00:50)

Hors ligne

#10 18-10-2016 10:03:58

bendia
Admin stagiaire
Distrib. : Jessie
Noyau : 3.16.0-4-amd64
(G)UI : Gnome + XFCE + Console
Inscription : 20-03-2012
Site Web

Re : Boot sur mauvais écran [Résolu]

Les voies de la technique sont parfois impénétrables kernal_panic.gif

Voir le tuto : C'est résolu ! Bravo mais il faut l'indiquer dans l'titre. smile

Ben
___________________
La seule question bête, c'est celle qu'on ne pose pas.
file-Re06858991f6f328b4907296ac5cea283

Hors ligne

#11 18-10-2016 10:26:17

pompier73
Membre
Lieu : Aude
Distrib. : Debian 8 "Jessie"
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome 3.14.1
Inscription : 13-10-2016

Re : Boot sur mauvais écran [Résolu]

c'est chouette et merci. :-)

Hors ligne

Pied de page des forums