Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#76 17-11-2016 18:55:16

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

non pas obligatoire , fait un apt-get update sans erreur pour mettre a jour le cache comme indiqué au dessus


apt-get update
 

Dernière modification par robert2a (17-11-2016 19:06:48)

Hors ligne

#77 17-11-2016 19:07:33

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

apt-get update


Atteint:1 http://ftp.fr.debian.org/debian stretch InRelease
Réception de:2 http://security.debian.org/debian-security stretch/updates InRelease [68,2 kB]
Réception de:3 http://ftp.fr.debian.org/debian stretch-updates InRelease [88,5 kB]
157 ko réceptionnés en 0s (210 ko/s)                                  
Lecture des listes de paquets... Fait
 

Hors ligne

#78 17-11-2016 19:10:06

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

on va supprimer cet user bumblebee comme en post #64


userdel -r bumblebee
 



normalement ça ne supprime pas le dossier dans /home mais on verra cela plus tard
quand tu aura posté le retour de la commande on passera a la mise a jour de stretch


apt-get upgrade
 



puis reboot pour prendre en compte le nouveau noyau (4.8 )


reboot
 



ensuite on finira l installation de bumblebee

Dernière modification par robert2a (17-11-2016 19:14:40)

Hors ligne

#79 17-11-2016 19:13:35

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

 userdel -r bumblebee


userdel : le groupe bumblebee n'a pas été supprimé car il contient d'autres membres.
userdel : l'emplacement de boîte aux lettres de bumblebee (/var/mail/bumblebee) n'a pas été trouvé
 

Hors ligne

#80 17-11-2016 19:17:06

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

ok , tout est bon , l utilisateur a été supprimé mais le groupe a été conservé puisque tu est dedans maintenant  wink

voir au dessus l 'upgrade , rien a posté , a la fin tu fais le reboot et tu revient sur le forum

pour l upgrade tu peut le faire par synaptic aussi (comme tu prefere )

Dernière modification par robert2a (17-11-2016 19:23:46)

Hors ligne

#81 17-11-2016 19:22:55

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Ok, c'est lancé smile Par contre j'ai un rendez-vous et je vais devoir partir d'ici 30 min ... hmm Demain je devrais pouvoir poursuivre ...

Hors ligne

#82 17-11-2016 19:24:51

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

oui il n y a pas de souci , juste redémarre et confirme que tout va bien wink

il reste l'installation de bumblebee , refaire les tests supprimer le dossier /home/bumblebee et puis cela devrait etre bon

les posts important #51 et #64 pour continuer

pour la suppression du dossier /home/bumblebee par la commande "rm -r" , tu est en root et c'est trés dangereux donc si un doute ne le fait pas (le dossier est vide pas trés important )

Dernière modification par robert2a (17-11-2016 19:34:40)

Hors ligne

#83 17-11-2016 19:33:08

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Voilà, je viens de redémarrer l'ordinateur. Après l'

 apt-get upgrade



L'installation de Bumblebee c'est ?

apt-get install bumblebee primus

Dernière modification par Strato (17-11-2016 19:36:04)

Hors ligne

#84 17-11-2016 19:35:22

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

ok bonne fin de soirée et peut etre a demain wink
@++

Dernière modification par robert2a (17-11-2016 19:38:28)

Hors ligne

#85 17-11-2016 19:37:28

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Merci, bonne soirée à toi aussi, et vraiment merci.gif pour ton aide !!

Hors ligne

#86 17-11-2016 19:52:30

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

oui tu peut lancer


apt-get install bumblebee primus
 



si ça touche au noyau un redemarrage peut etre aprés l installation et ensuite passer aux tests

ps: pas vu ta question au dessus hmm

j'espere que le retour de ceci sera positif


optirun glxgears -info
 

Dernière modification par robert2a (17-11-2016 19:58:07)

Hors ligne

#87 18-11-2016 15:46:54

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour,
Après installation

 apt-get install bumblebee primus

Puis redémarrage.
J'ai essayé dans un premier temps toutes les commandes indiqués au Post  #51 avant de répondre. Puis je les ai refaites et là.. problèmes...
Donc dans un premier temps voilà ce que j'ai eu (les problème à la fin?) :

 optirun glxgears -info


GL_RENDERER   = Gallium 0.4 on NVC1
GL_VERSION    = 3.0 Mesa 12.0.3
GL_VENDOR     = nouveau
GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_ATI_fragment_shader GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp GL_NV_fog_distance GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_depth_bounds_test GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_ATI_texture_compression_3dc GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_packed_depth_stencil GL_ARB_vertex_array_object GL_ATI_separate_stencil GL_ATI_texture_mirror_once GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_compression_latc GL_EXT_texture_integer GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_AMD_performance_monitor GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_conservative_depth GL_AMD_draw_buffers_blend GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_texture_lod GL_ARB_texture_cube_map_array GL_ARB_texture_gather GL_ARB_texture_multisample GL_ARB_texture_query_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_NV_texture_barrier GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_shader_precision GL_ARB_texture_compression_bptc GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_NV_vdpau_interop GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_ARB_base_instance GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_shader_atomic_counters GL_ARB_shader_image_load_store GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_texture_storage GL_ARB_transform_feedback_instanced GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_transform_feedback GL_AMD_shader_trinary_minmax GL_ARB_ES3_compatibility GL_ARB_arrays_of_arrays GL_ARB_clear_buffer_object GL_ARB_compute_shader GL_ARB_copy_image GL_ARB_explicit_uniform_location GL_ARB_framebuffer_no_attachments GL_ARB_invalidate_subdata GL_ARB_program_interface_query GL_ARB_robust_buffer_access_behavior GL_ARB_shader_image_size GL_ARB_shader_storage_buffer_object GL_ARB_stencil_texturing GL_ARB_texture_query_levels GL_ARB_texture_storage_multisample GL_ARB_texture_view GL_ARB_vertex_attrib_binding GL_KHR_debug GL_ARB_buffer_storage GL_ARB_clear_texture GL_ARB_internalformat_query2 GL_ARB_multi_bind GL_ARB_query_buffer_object GL_ARB_shader_draw_parameters GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_stencil8 GL_ARB_vertex_type_10f_11f_11f_rev GL_EXT_shader_integer_mix GL_ARB_clip_control GL_ARB_conditional_render_inverted GL_ARB_cull_distance GL_ARB_derivative_control GL_ARB_get_texture_sub_image GL_ARB_pipeline_statistics_query GL_ARB_shader_texture_image_samples GL_ARB_texture_barrier GL_EXT_polygon_offset_clamp GL_KHR_context_flush_control GL_KHR_robust_buffer_access_behavior GL_ARB_shader_atomic_counter_ops
VisualID 183, 0xb7
278 frames in 5.0 seconds = 55.489 FPS
288 frames in 5.0 seconds = 57.423 FPS
300 frames in 5.0 seconds = 59.812 FPS
300 frames in 5.0 seconds = 59.813 FPS
300 frames in 5.0 seconds = 59.818 FPS

Ensuite :

 man optirun


OPTIRUN(1)                       User Commands                      OPTIRUN(1)

NAME
       optirun - run programs on the discrete video card

SYNOPSIS
       optirun [OPTION]... command [command options...]

DESCRIPTION
       Run an application using the discrete video card.

       --failsafe
              run a program even if the nvidia card is unavailable

       --no-failsafe
              do not run a program if the nvidia card is unavailable

       --no-xorg
              do not start secondary X server (implies -b none)

       -b, --bridge METHOD
              acceleration/displaying  bridge  to  use. Valid values are auto,
              virtualgl and primus. The --vgl-* options only make  sense  when
 Manual page optirun(1) line 1 (press h for help or q to quit)
 


 optirun --help


Usage: optirun [OPTION]... command [command options...]
Run an application using the discrete video card.

      --failsafe      run a program even if the nvidia card is unavailable
      --no-failsafe   do not run a program if the nvidia card is unavailable
      --no-xorg       do not start secondary X server (implies -b none)
  -b, --bridge METHOD  acceleration/displaying bridge to use. Valid values
                       are auto, virtualgl and primus. The --vgl-* options
                       only make sense when using the virtualgl bridge,
                       while the --primus-* options apply only when using
                       the primus bridge.
           Additionally, value none is recognized, and its effect
           is to add paths to driver libraries to LD_LIBRARY_PATH
           (useful for nvidia-settings and CUDA applications)
  -c, --vgl-compress METHOD  image compression or transport to use with
                               VirtualGL. Valid values for METHOD are proxy,
                               jpeg, rgb, xv and yuv. Changing this setting
                               may affect performance, CPU usage and image
                               quality
      --vgl-options OPTS   a space-separated list of command options to be
                             passed to vglrun. Useful for debugging virtualgl
                             by passing options to it like +tr. These OPTS
                             override the settings from optirun so be careful
                             with setting it
      --primus-ldpath PATH  a colon-separated list of paths which are searched
                            for the primus libGL.so.1
  -q, --quiet, --silent   suppresses all logging messages
  -v, --verbose           increase the verbosity level of log messages. It
                            can be specified up to two times (or five if
                            --quiet is used)
      --debug             show all logging messages by setting the verbosity
                            level to the maximum
  -C, --config FILE       retrieve settings for Bumblebee from FILE
  -d, --display VDISPLAY  find the Bumblebee X server on VDISPLAY. Do not
                            confuse this option with the DISPLAY environment
                            variable. By default, PATH is queried from the
                            daemon
  -l, --ldpath PATH       libraries like libGL.so are searched in PATH
                            (useful for the nvidia driver). By default, PATH
                            is queried from the
  -s, --socket FILENAME   use FILENAME for communication with the daemon
  -h, --help              display this help and exit
  --version               output version information and exit

Examples:
  optirun glxspheres      Runs the graphics demo supplied with Virtual GL.
  optirun -c yuv glxspheres  Runs a program with the yuv transport method for
                             better performance.
  optirun firefox http://example.com    Run a program with arguments.

Report bugs on <http://Bumblebee-Project.org/issues>
Bumblebee homepage: <http://Bumblebee-Project.org/>
 


 glxgears


Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
301 frames in 5.0 seconds = 60.044 FPS
300 frames in 5.0 seconds = 59.818 FPS
 



Voilà, cependant j'ai refait par la suite la commande

 optirun glxgears -info

et là j'ai eu la même réponse que précédemment mais avec à la fin, à la place de par exemple "278 frames in 5.0 seconds = 55.489 FPS" il y avais un message d'erreur que je ne l'ai malheureusement pas noté. J'ai redémarré l'ordinateur et effectuer une nouvelle fois la commande, à présent pour ces commande j’obtiens:

 optirun glxgears

 optirun glxgears -info


[ 1034.653002] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 1034.653113] [ERROR]Aborting because fallback start is disabled.
 



La réponse des autre commandes n'a pas changé.

Dernière modification par Strato (18-11-2016 16:37:55)

Hors ligne

#88 18-11-2016 15:59:54

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Strato post #87 a écrit :

et là j'ai eu la même réponse que précédemment mais avec à la fin, à la place de par exemple "278 frames in 5.0 seconds = 55.489 FPS" il y avais un message d'erreur que je ne l'ai malheureusement pas noté.


Je viens de redémarrer et recommancer les commande et j'ai retrouvé le message d'erreur.
D'abord j'ai fait ceci:

optirun glxgears


275 frames in 5.0 seconds = 54.998 FPS
289 frames in 5.0 seconds = 57.625 FPS
300 frames in 5.0 seconds = 59.815 FPS
300 frames in 5.0 seconds = 59.813 FPS
300 frames in 5.0 seconds = 59.815 FPS
300 frames in 5.0 seconds = 59.814 FPS
300 frames in 5.0 seconds = 59.814 FPS
 


Puis j'ai fermé le terminal puis j'en ai ouvert un autre qui avec la commande qui suit m'a donné le message d'erreur que je n'avais pas pu poster.

optirun glxgears -info


GL_RENDERER   = Gallium 0.4 on NVC1
GL_VERSION    = 3.0 Mesa 12.0.3
GL_VENDOR     = nouveau
GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_ATI_fragment_shader GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp GL_NV_fog_distance GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_depth_bounds_test GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_ATI_texture_compression_3dc GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_packed_depth_stencil GL_ARB_vertex_array_object GL_ATI_separate_stencil GL_ATI_texture_mirror_once GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_compression_latc GL_EXT_texture_integer GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_AMD_performance_monitor GL_ARB_copy_buffer GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_conservative_depth GL_AMD_draw_buffers_blend GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_shader_texture_lod GL_ARB_texture_cube_map_array GL_ARB_texture_gather GL_ARB_texture_multisample GL_ARB_texture_query_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_NV_texture_barrier GL_ARB_get_program_binary GL_ARB_robustness GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_shader_precision GL_ARB_texture_compression_bptc GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_NV_vdpau_interop GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_ARB_base_instance GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_shader_atomic_counters GL_ARB_shader_image_load_store GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_texture_storage GL_ARB_transform_feedback_instanced GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_transform_feedback GL_AMD_shader_trinary_minmax GL_ARB_ES3_compatibility GL_ARB_arrays_of_arrays GL_ARB_clear_buffer_object GL_ARB_compute_shader GL_ARB_copy_image GL_ARB_explicit_uniform_location GL_ARB_framebuffer_no_attachments GL_ARB_invalidate_subdata GL_ARB_program_interface_query GL_ARB_robust_buffer_access_behavior GL_ARB_shader_image_size GL_ARB_shader_storage_buffer_object GL_ARB_stencil_texturing GL_ARB_texture_query_levels GL_ARB_texture_storage_multisample GL_ARB_texture_view GL_ARB_vertex_attrib_binding GL_KHR_debug GL_ARB_buffer_storage GL_ARB_clear_texture GL_ARB_internalformat_query2 GL_ARB_multi_bind GL_ARB_query_buffer_object GL_ARB_shader_draw_parameters GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_stencil8 GL_ARB_vertex_type_10f_11f_11f_rev GL_EXT_shader_integer_mix GL_ARB_clip_control GL_ARB_conditional_render_inverted GL_ARB_cull_distance GL_ARB_derivative_control GL_ARB_get_texture_sub_image GL_ARB_pipeline_statistics_query GL_ARB_shader_texture_image_samples GL_ARB_texture_barrier GL_EXT_polygon_offset_clamp GL_KHR_context_flush_control GL_KHR_robust_buffer_access_behavior GL_ARB_shader_atomic_counter_ops
VisualID 183, 0xb7
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)
  Major opcode of failed request:  154 (DRI2)
  Minor opcode of failed request:  8 (DRI2SwapBuffers   )
  Resource id in failed request:  0x200003
  Serial number of failed request:  31
  Current serial number in output stream:  32
 



En gros, "ça tourne en boucle" pour la commande "optirun glxgears" et/ou "optirun glxgears -info":
1) La commande donne un message qui affiche environ 60 FPS
2) En retapant la commande ou après un redémarrage la commande ne va pas au bout et indique un premier message d'erreur à la fin : "X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)" [...]
3) Après redémarrage la commande indique le second message d'erreur : "[ 1034.653002] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0) [...]"
4) Après redémarrage on retourne à 1),la commande donne un message qui affiche environ 60 FPS
Etc.

Dernière modification par Strato (18-11-2016 16:13:24)

Hors ligne

#89 18-11-2016 20:08:53

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonsoir

peut etre regarder le Xorg.0.log


nano /var/log/Xorg.0.log
 


tu a fait une grosse mise a jour hier soir (changement de noyau )  plus l installation de bumblebee peut etre quelque chose ne va pas
peut etre que tout simplement tu termine  pas correctement la commande

tu peut tester ceci


optirun firefox
 


ça doit t'ouvrir je pense firefox avec la carte nvidia

pour la commande glxgears ce la m'affiche


glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.268 FPS
300 frames in 5.0 seconds = 59.987 FPS
301 frames in 5.0 seconds = 60.004 FPS
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 55 requests (55 known processed) with 0 events remaining.
 


avec le driver propriétaire debian et une carte GTX970 , je ferme le processus avec un clic sur la croix de la fenetre ou il y a le petit cube qui évolue .
et je revient a l invite sur ma console
pour la seconde commande j'ai pas la possibilité de tester  ( optirun glxgears )

ps: une précision , tu est toujours en double boot jessie / stretch et tu travaille sur stretch et mate pour les tests ?
comment ce comporte ton double écran ? (écran portable + écran HDMI ) depuis les modifications ? (ou uniquement toujours en miniDP )

pour la carte intel la commande glxinfo -B  doit te donner les infos OpenGL de ta carte  et l'info => "direct rendering: Yes"


glxinfo -B
 


je sais pas si la meme chose fonctionne pour la carte nvidia (genre "optirun glxinfo -B" )
bon en utilisateur normal (pas en root ) tu risque rien a part un message d'erreur

Dernière modification par robert2a (18-11-2016 20:58:38)

Hors ligne

#90 18-11-2016 22:43:35

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonsoir,
Voici les résultats:

 nano /var/log/Xorg.0.log


[    24.660]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    24.660] X Protocol Version 11, Revision 0
[    24.661] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    24.661] Current Operating System: Linux Debian 4.7.0-1-amd64 #1 SMP Debian$
[    24.661] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=U$
[    24.661] Build Date: 06 September 2016  01:32:44PM
[    24.661] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[    24.661] Current version of pixman: 0.34.0
[    24.661]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    24.661] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.661] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 18 21:11:43 20$
[    24.689] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.748] (==) No Layout section.  Using the first Screen section.
[    24.748] (==) No screen section available. Using defaults.
 


En ouvrant manuellement le fichier Xorg.0.log à partir de poste de travail j'ai ceci :

[    24.660]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    24.660] X Protocol Version 11, Revision 0
[    24.661] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    24.661] Current Operating System: Linux Debian 4.7.0-1-amd64 #1 SMP Debian 4.7.8-1 (2016-10-19) x86_64
[    24.661] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=c9c5a086-1363-43da-8139-639f1a604522 ro quiet
[    24.661] Build Date: 06 September 2016  01:32:44PM
[    24.661] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[    24.661] Current version of pixman: 0.34.0
[    24.661]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    24.661] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.661] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 18 21:11:43 2016
[    24.689] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.748] (==) No Layout section.  Using the first Screen section.
[    24.748] (==) No screen section available. Using defaults.
[    24.748] (**) |-->Screen "Default Screen Section" (0)
[    24.748] (**) |   |-->Monitor "<default monitor>"
[    24.767] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    24.767] (==) Automatically adding devices
[    24.767] (==) Automatically enabling devices
[    24.767] (==) Automatically adding GPU devices
[    24.767] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    24.839] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    24.839]  Entry deleted from font path.
[    24.940] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    24.940] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.940] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.960] (II) Loader magic: 0x564c122badc0
[    24.960] (II) Module ABI versions:
[    24.960]  X.Org ANSI C Emulation: 0.4
[    24.960]  X.Org Video Driver: 20.0
[    24.960]  X.Org XInput driver : 22.1
[    24.960]  X.Org Server Extension : 9.0
[    24.961] (++) using VT number 7

[    24.961] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    24.962] (II) xfree86: Adding drm device (/dev/dri/card0)
[    24.964] (--) PCI:*(0:0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    24.964] (--) PCI: (0:1:0:0) 10de:0df5:1028:04b6 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    24.964] (II) LoadModule: "glx"
[    24.995] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.388] (II) Module glx: vendor="X.Org Foundation"
[    25.388]  compiled for 1.18.4, module version = 1.0.0
[    25.388]  ABI class: X.Org Server Extension, version 9.0
[    25.388] (==) AIGLX enabled
[    25.388] (==) Matched modesetting as autoconfigured driver 0
[    25.388] (==) Matched fbdev as autoconfigured driver 1
[    25.388] (==) Matched vesa as autoconfigured driver 2
[    25.388] (==) Assigned the driver to the xf86ConfigLayout
[    25.388] (II) LoadModule: "modesetting"
[    25.411] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.438] (II) Module modesetting: vendor="X.Org Foundation"
[    25.438]  compiled for 1.18.4, module version = 1.18.4
[    25.438]  Module class: X.Org Video Driver
[    25.438]  ABI class: X.Org Video Driver, version 20.0
[    25.438] (II) LoadModule: "fbdev"
[    25.438] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.456] (II) Module fbdev: vendor="X.Org Foundation"
[    25.456]  compiled for 1.18.0, module version = 0.4.4
[    25.457]  Module class: X.Org Video Driver
[    25.457]  ABI class: X.Org Video Driver, version 20.0
[    25.457] (II) LoadModule: "vesa"
[    25.457] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.465] (II) Module vesa: vendor="X.Org Foundation"
[    25.465]  compiled for 1.18.0, module version = 2.3.4
[    25.465]  Module class: X.Org Video Driver
[    25.465]  ABI class: X.Org Video Driver, version 20.0
[    25.465] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    25.465] (II) FBDEV: driver for framebuffer: fbdev
[    25.465] (II) VESA: driver for VESA chipsets: vesa
[    25.472] (II) modeset(0): using drv /dev/dri/card0
[    25.472] (WW) Falling back to old probe method for fbdev
[    25.472] (II) Loading sub module "fbdevhw"
[    25.472] (II) LoadModule: "fbdevhw"
[    25.473] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.511] (II) Module fbdevhw: vendor="X.Org Foundation"
[    25.511]  compiled for 1.18.4, module version = 0.0.2
[    25.511]  ABI class: X.Org Video Driver, version 20.0
[    25.511] (WW) Falling back to old probe method for vesa
[    25.511] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    25.511] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    25.512] (==) modeset(0): RGB weight 888
[    25.512] (==) modeset(0): Default visual is TrueColor
[    25.512] (II) Loading sub module "glamoregl"
[    25.512] (II) LoadModule: "glamoregl"
[    25.512] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    25.679] (II) Module glamoregl: vendor="X.Org Foundation"
[    25.679]  compiled for 1.18.4, module version = 1.0.0
[    25.679]  ABI class: X.Org ANSI C Emulation, version 0.4
[    25.679] (II) glamor: OpenGL accelerated X.org driver based.
[    26.107] (II) glamor: EGL version 1.4 (DRI2):
[    26.270] (II) modeset(0): glamor initialized
[    26.270] (II) modeset(0): Output LVDS-1 has no monitor section
[    26.388] (II) modeset(0): Output VGA-1 has no monitor section
[    26.404] (II) modeset(0): Output HDMI-1 has no monitor section
[    26.483] (II) modeset(0): Output DP-1 has no monitor section
[    26.483] (II) modeset(0): EDID for output LVDS-1
[    26.483] (II) modeset(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    26.483] (II) modeset(0): Year: 2010  Week: 0
[    26.483] (II) modeset(0): EDID Version: 1.3
[    26.483] (II) modeset(0): Digital Display Input
[    26.483] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.483] (II) modeset(0): Gamma: 2.20
[    26.483] (II) modeset(0): No DPMS capabilities specified
[    26.483] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    26.483] (II) modeset(0): First detailed timing is preferred mode
[    26.483] (II) modeset(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    26.483] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    26.483] (II) modeset(0): Manufacturer's mask: 0
[    26.483] (II) modeset(0): Supported detailed timing:
[    26.483] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    26.483] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    26.483] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    26.483] (II) modeset(0): Supported detailed timing:
[    26.483] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    26.483] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    26.483] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    26.483] (II) modeset(0):  8MN61€156AT
[    26.483] (II) modeset(0): Unknown vendor-specific block 0
[    26.483] (II) modeset(0): EDID (in hex):
[    26.483] (II) modeset(0):   00ffffffffffff004ca3415400000000
[    26.483] (II) modeset(0):   00140103902213780ac8959e57549226
[    26.483] (II) modeset(0):   0f505400000001010101010101010101
[    26.483] (II) modeset(0):   010101010101f41b5690500015303020
[    26.483] (II) modeset(0):   250058c21000001af41b569050001530
[    26.483] (II) modeset(0):   3020250058c21000001a000000fe0038
[    26.483] (II) modeset(0):   4d4e36318031353641540a2000000000
[    26.483] (II) modeset(0):   00000000000000000001010a2020001d
[    26.483] (II) modeset(0): Printing probed modes for output LVDS-1
[    26.483] (II) modeset(0): Modeline "1366x768"x60.1   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    26.483] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    26.483] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    26.483] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    26.483] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.483] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    26.483] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    26.483] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    26.483] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    26.483] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    26.483] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    26.483] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.483] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.483] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    26.484] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    26.484] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    26.484] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    26.484] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    26.484] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    26.484] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    26.484] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.484] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    26.484] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    26.484] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    26.484] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    26.484] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    26.484] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    26.484] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    26.604] (II) modeset(0): EDID for output VGA-1
[    26.620] (II) modeset(0): EDID for output HDMI-1
[    26.620] (II) modeset(0): Manufacturer: IVM  Model: 6113  Serial#: 2214
[    26.620] (II) modeset(0): Year: 2014  Week: 41
[    26.620] (II) modeset(0): EDID Version: 1.3
[    26.620] (II) modeset(0): Digital Display Input
[    26.620] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    26.620] (II) modeset(0): Gamma: 2.20
[    26.620] (II) modeset(0): DPMS capabilities: Off
[    26.620] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    26.620] (II) modeset(0): First detailed timing is preferred mode
[    26.620] (II) modeset(0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    26.620] (II) modeset(0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    26.620] (II) modeset(0): Supported established timings:
[    26.620] (II) modeset(0): 640x480@60Hz
[    26.620] (II) modeset(0): 640x480@67Hz
[    26.620] (II) modeset(0): 800x600@56Hz
[    26.620] (II) modeset(0): 800x600@60Hz
[    26.620] (II) modeset(0): 1024x768@60Hz
[    26.620] (II) modeset(0): Manufacturer's mask: 0
[    26.620] (II) modeset(0): Supported standard timings:
[    26.620] (II) modeset(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    26.620] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    26.620] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    26.620] (II) modeset(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    26.620] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    26.620] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    26.620] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    26.620] (II) modeset(0): Supported detailed timing:
[    26.620] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    26.620] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    26.620] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    26.620] (II) modeset(0): Serial No: 1127844122214
[    26.620] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    26.620] (II) modeset(0): Monitor name: PLE2483H
[    26.621] (II) modeset(0): EDID (in hex):
[    26.621] (II) modeset(0):   00ffffffffffff0026cd1361a6080000
[    26.621] (II) modeset(0):   2918010380351e782a0ef5a555509e26
[    26.621] (II) modeset(0):   105054330800710081408180a940b300
[    26.621] (II) modeset(0):   9500d1c00101023a801871382d40582c
[    26.621] (II) modeset(0):   4500132b2100001e000000ff00313132
[    26.621] (II) modeset(0):   37383434313232323134000000fd0037
[    26.621] (II) modeset(0):   4c1e5311000a202020202020000000fc
[    26.621] (II) modeset(0):   00504c4532343833480a20202020002e
[    26.621] (II) modeset(0): Printing probed modes for output HDMI-1
[    26.621] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    26.621] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    26.621] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    26.621] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    26.621] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    26.621] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    26.621] (II) modeset(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    26.621] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    26.621] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    26.621] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    26.621] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    26.621] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    26.699] (II) modeset(0): EDID for output DP-1
[    26.699] (II) modeset(0): Output LVDS-1 connected
[    26.699] (II) modeset(0): Output VGA-1 disconnected
[    26.699] (II) modeset(0): Output HDMI-1 connected
[    26.699] (II) modeset(0): Output DP-1 disconnected
[    26.699] (II) modeset(0): Using spanning desktop for initial modes
[    26.700] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    26.700] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[    26.700] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    26.700] (==) modeset(0): DPI set to (96, 96)
[    26.700] (II) Loading sub module "fb"
[    26.700] (II) LoadModule: "fb"
[    26.700] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.709] (II) Module fb: vendor="X.Org Foundation"
[    26.709]  compiled for 1.18.4, module version = 1.0.0
[    26.709]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.709] (II) UnloadModule: "fbdev"
[    26.709] (II) Unloading fbdev
[    26.709] (II) UnloadSubModule: "fbdevhw"
[    26.709] (II) Unloading fbdevhw
[    26.709] (II) UnloadModule: "vesa"
[    26.709] (II) Unloading vesa
[    26.709] (==) Depth 24 pixmap format is 32 bpp
[    26.939] (==) modeset(0): Backing store enabled
[    26.939] (==) modeset(0): Silken mouse enabled
[    26.952] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.035] (==) modeset(0): DPMS enabled
[    27.035] (II) modeset(0): [DRI2] Setup complete
[    27.035] (II) modeset(0): [DRI2]   DRI driver: i965
[    27.035] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    27.085] (--) RandR disabled
[    27.095] (II) SELinux: Disabled on system
[    27.129] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.130] (II) AIGLX: enabled GLX_ARB_create_context
[    27.130] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    27.130] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    27.130] (II) AIGLX: enabled GLX_INTEL_swap_event
[    27.130] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    27.130] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    27.130] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    27.130] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    27.130] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    27.130] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    27.130] (II) AIGLX: Loaded and initialized i965
[    27.130] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.143] (II) modeset(0): Damage tracking initialized
[    27.143] (II) modeset(0): Setting screen physical size to 869 x 285
[    27.697] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    27.697] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    27.697] (II) LoadModule: "libinput"
[    27.697] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    27.766] (II) Module libinput: vendor="X.Org Foundation"
[    27.766]  compiled for 1.18.4, module version = 0.20.0
[    27.766]  Module class: X.Org XInput Driver
[    27.766]  ABI class: X.Org XInput driver, version 22.1
[    27.766] (II) Using input driver 'libinput' for 'Power Button'
[    27.766] (**) Power Button: always reports core events
[    27.766] (**) Option "Device" "/dev/input/event5"
[    27.766] (**) Option "_source" "server/udev"
[    27.767] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    27.767] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    27.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    27.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.776] (**) Option "xkb_model" "pc105"
[    27.776] (**) Option "xkb_layout" "fr"
[    27.776] (**) Option "xkb_variant" "latin9"
[    27.863] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    27.863] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    27.864] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    27.864] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    27.864] (II) Using input driver 'libinput' for 'Video Bus'
[    27.864] (**) Video Bus: always reports core events
[    27.865] (**) Option "Device" "/dev/input/event8"
[    27.865] (**) Option "_source" "server/udev"
[    27.865] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    27.865] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    27.880] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event8"
[    27.880] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    27.880] (**) Option "xkb_model" "pc105"
[    27.880] (**) Option "xkb_layout" "fr"
[    27.880] (**) Option "xkb_variant" "latin9"
[    27.881] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    27.881] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    27.882] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    27.882] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    27.882] (II) Using input driver 'libinput' for 'Video Bus'
[    27.882] (**) Video Bus: always reports core events
[    27.882] (**) Option "Device" "/dev/input/event7"
[    27.882] (**) Option "_source" "server/udev"
[    27.883] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    27.883] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    27.896] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[    27.896] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    27.896] (**) Option "xkb_model" "pc105"
[    27.896] (**) Option "xkb_layout" "fr"
[    27.896] (**) Option "xkb_variant" "latin9"
[    27.897] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    27.897] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    27.898] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    27.898] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    27.898] (II) Using input driver 'libinput' for 'Power Button'
[    27.898] (**) Power Button: always reports core events
[    27.898] (**) Option "Device" "/dev/input/event2"
[    27.898] (**) Option "_source" "server/udev"
[    27.898] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    27.898] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    27.908] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    27.908] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    27.908] (**) Option "xkb_model" "pc105"
[    27.908] (**) Option "xkb_layout" "fr"
[    27.908] (**) Option "xkb_variant" "latin9"
[    27.909] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    27.909] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    27.909] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    27.909] (II) No input driver specified, ignoring this device.
[    27.909] (II) This device may have been added with another device file.
[    27.910] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    27.910] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    27.910] (II) Using input driver 'libinput' for 'Sleep Button'
[    27.910] (**) Sleep Button: always reports core events
[    27.910] (**) Option "Device" "/dev/input/event3"
[    27.910] (**) Option "_source" "server/udev"
[    27.911] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    27.911] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    27.920] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    27.920] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    27.920] (**) Option "xkb_model" "pc105"
[    27.920] (**) Option "xkb_layout" "fr"
[    27.920] (**) Option "xkb_variant" "latin9"
[    27.921] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    27.921] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    27.922] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event9)
[    27.922] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[    27.922] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[    27.922] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    27.922] (**) Option "Device" "/dev/input/event9"
[    27.922] (**) Option "_source" "server/udev"
[    27.923] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is tagged by udev as: Keyboard
[    27.923] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is a keyboard
[    27.948] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input14/event9"
[    27.948] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    27.948] (**) Option "xkb_model" "pc105"
[    27.948] (**) Option "xkb_layout" "fr"
[    27.948] (**) Option "xkb_variant" "latin9"
[    27.949] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is tagged by udev as: Keyboard
[    27.949] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event9 is a keyboard
[    27.950] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    27.950] (II) No input driver specified, ignoring this device.
[    27.950] (II) This device may have been added with another device file.
[    27.951] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    27.951] (II) No input driver specified, ignoring this device.
[    27.951] (II) This device may have been added with another device file.
[    27.952] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    27.952] (II) No input driver specified, ignoring this device.
[    27.952] (II) This device may have been added with another device file.
[    27.952] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    27.952] (II) No input driver specified, ignoring this device.
[    27.952] (II) This device may have been added with another device file.
[    27.953] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    27.953] (II) No input driver specified, ignoring this device.
[    27.953] (II) This device may have been added with another device file.
[    27.954] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    27.954] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    27.954] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    27.954] (**) AT Translated Set 2 keyboard: always reports core events
[    27.954] (**) Option "Device" "/dev/input/event0"
[    27.954] (**) Option "_source" "server/udev"
[    27.955] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    27.955] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    27.984] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    27.984] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    27.984] (**) Option "xkb_model" "pc105"
[    27.984] (**) Option "xkb_layout" "fr"
[    27.984] (**) Option "xkb_variant" "latin9"
[    27.985] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    27.985] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    27.986] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    27.986] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    27.986] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    27.986] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.986] (**) Option "Device" "/dev/input/event1"
[    27.986] (**) Option "_source" "server/udev"
[    27.987] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    27.987] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.008] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    28.008] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    28.009] (**) Option "AccelerationScheme" "none"
[    28.009] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    28.009] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    28.009] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    28.010] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.010] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.010] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    28.010] (II) No input driver specified, ignoring this device.
[    28.010] (II) This device may have been added with another device file.
[    28.011] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    28.011] (II) No input driver specified, ignoring this device.
[    28.011] (II) This device may have been added with another device file.
[    62.754] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    62.754] (II) modeset(0): Printing DDC gathered Modelines:
[    62.754] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    62.967] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    62.967] (II) modeset(0): Printing DDC gathered Modelines:
[    62.967] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    63.300] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    63.300] (II) modeset(0): Printing DDC gathered Modelines:
[    63.300] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    63.515] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    63.515] (II) modeset(0): Printing DDC gathered Modelines:
[    63.515] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    65.491] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    65.491] (II) modeset(0): Printing DDC gathered Modelines:
[    65.491] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    79.837] (II) Axis 0x1 value 1239 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details
[   226.004] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   226.004] (II) modeset(0): Printing DDC gathered Modelines:
[   226.004] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   226.219] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   226.219] (II) modeset(0): Printing DDC gathered Modelines:
[   226.219] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   226.431] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[   226.431] (II) config/udev: Adding drm device (/dev/dri/card1)
[   226.431] (II) xfree86: Adding drm device (/dev/dri/card1)
[   226.431] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
[   226.431] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   226.431] (II) modeset(0): Printing DDC gathered Modelines:
[   226.431] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   226.644] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   226.644] (II) modeset(0): Printing DDC gathered Modelines:
[   226.644] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   226.858] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   226.859] (II) modeset(0): Printing DDC gathered Modelines:
[   226.859] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   236.195] (II) modeset(0): EDID vendor "SEC", prod id 21569
[   236.195] (II) modeset(0): Printing DDC gathered Modelines:
[   236.195] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)


J'ai fermé Firefox et lancé la commande

optirun firefox


1479500170083 addons.productaddons  ERROR Request failed certificate checks: [Exception... "SSL is required and URI scheme is not https."  nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)"  location: "JS frame :: resource://gre/modules/CertUtils.jsm :: checkCert :: line 145"  data: no]
1479500332184 addons.productaddons  ERROR Request failed certificate checks: [Exception... "SSL is required and URI scheme is not https."  nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)"  location: "JS frame :: resource://gre/modules/CertUtils.jsm :: checkCert :: line 145"  data: no]
 


Cela ma ouvert Firefox, mais est-ce avec la carte Nvidia je sais pas ? En fermant le terminal cela m'a fermé les fenêtres Firefox.

peut etre que tout simplement tu termine  pas correctement la commande

C'est possible, pour la commande "glxgears" je fermais directement la terminal et pas la fenêtre avec les engrenages. En fermant la fenêtre avec les engrenage comme tu l'a indiqué j'ai à peut de chose près la même chose que toi :

Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
301 frames in 5.0 seconds = 60.004 FPS
300 frames in 5.0 seconds = 59.816 FPS
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 681 requests (671 known processed) with 0 events remaining.
 


ps: une précision , tu est toujours en double boot jessie / stretch et tu travaille sur stretch et mate pour les tests ?
comment ce comporte ton double écran ? (écran portable + écran HDMI ) depuis les modifications ? (ou uniquement toujours en miniDP )

Pour le moment j'ai Stretch avec mate sur un disque dur externe, et W$-10 sur le disque dur interne (des problèmes avec le w$ m'y on contraint...) et c'est tout, les Jessie je l'ai en USB-Live. Donc tout ce passe sur Stretch et mate. Je n'ai pas réessayé avec HDMI depuis le miniDP.

 glxinfo -B


name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel Open Source Technology Center (0x8086)
    Device: Mesa DRI Intel(R) Sandybridge Mobile  (0x116)
    Version: 12.0.3
    Accelerated: yes
    Video memory: 1536MB
    Unified memory: yes
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.0
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 12.0.3
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 12.0.3
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.0 Mesa 12.0.3
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00
 

ça semble correspondre.

optirun glxinfo -B


name of display: :0
display: :0  screen: 0
direct rendering: Yes
OpenGL vendor string: nouveau
OpenGL renderer string: Gallium 0.4 on NVC1
OpenGL core profile version string: 4.3 (Core Profile) Mesa 12.0.3
OpenGL core profile shading language version string: 4.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 12.0.3
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
 

Hors ligne

#91 18-11-2016 23:01:34

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Précisions sur le branchement du deuxième écran. Je viens d'éteindre l'ordinateur, de débrancher le miniDP et de brancher le HDMI, se second écran n'est pas reconnu avec le HDMI. Alors j'ai tenté dans le menu natif de l'écran de sélectionné HDMI, mais il n'est toujours pas reconnu. Sans redémarrer l'ordinateur j'ai débranché HDMI et rebranché miniDP, cela n'a pas fonctionné, même  en allant dans le menu natif de l'écran et sélectionnant miniDP. J'ai redémarrer l'ordinateur avec le miniDP et cela refonctionne.

Pour plus de précision sur le comportement du second écran avec miniDP :
- l'or du chargement de Debian (texte blanc sur fond noir) l'image apparaît en clone
- au moment d'entrer le mot passe l'image apparaît en mode étendu, et c'est sur le second écran (l'externe) qu'apparaît la fenêtre d'utilisateur ou je doit entrer le mot de passe
- une fois sur le bureau c'est le premier écran (l'interne) qui est l'écran principale avec le tableau de bord et le reste.

Dernière modification par Strato (18-11-2016 23:03:24)

Hors ligne

#92 18-11-2016 23:21:06

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Je viens de redémarrer l'ordinateur et de refaire cette commande :

optirun firefox


J'ai eu cette réponse :

[ 1034.653002] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 1034.653113] [ERROR]Aborting because fallback start is disabled.


J'ai redémarré l'ordinateur, il y a eu des messages "Failed" qui ont étaient affichés que je n'ai pas eu le temps d’identifier. Une fois redémarrer j'ai refait la même commande et eu la même réponse. J'ai redémarré et là il n'y a pas eu de messages "Failed".
Une fois redémarrer j'ai effectuer une nouvelle fois la commande indiqué, cette fois-ci Firefox c'est ouvert. Au bout d'un certain temps ceci s'incrit dans le terminal (je l'ai déjà indiqué plus haut mais le remet)

1479503529166 addons.productaddons  ERROR Request failed certificate checks: [Exception... "SSL is required and URI scheme is not https."  nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)"  location: "JS frame :: resource://gre/modules/CertUtils.jsm :: checkCert :: line 145"  data: no]
1479503582428 addons.productaddons  ERROR Request failed certificate checks: [Exception... "SSL is required and URI scheme is not https."  nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)"  location: "JS frame :: resource://gre/modules/CertUtils.jsm :: checkCert :: line 145"  data: no]
 


En fermant le terminal cela ferme Firefox

Dernière modification par Strato (18-11-2016 23:23:41)

Hors ligne

#93 19-11-2016 00:45:08

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

on va commencé par le plus simple smile
pour le comportement des écrans j'ai le meme que toi avec un pc de bureau et un I3 skylake et 2 écrans connectés (VGA et HDMI ) sur la carte mere (gpu intel )
ce que tu décrit ici


Pour plus de précision sur le comportement du second écran avec miniDP :
- l'or du chargement de Debian (texte blanc sur fond noir) l'image apparaît en clone
- au moment d'entrer le mot passe l'image apparaît en mode étendu,
et c'est sur le second écran (l'externe) qu'apparaît la fenêtre d'utilisateur ou je doit entrer le mot de passe
- une fois sur le bureau c'est le premier écran (l'interne) qui est l'écran principale avec le tableau de bord et le reste.
 



pour le connecteur HDMI je n'ai aucune réponse a ce probleme , en tout cas on a écarté la possibilité d'une mauvaise gestion des cartes graphiques

pour l erreur de firefox c'est un probleme d'addons et certificat (comme tu dit c'est la carte nvidia qui doit le lancer mais rien ne le prouve a part la commande  )

pour le module mouse et cannot access secondary GPU  pas vraiment de réponse pour l instant

pour les commandes glxinfo -B et optirun ça a l air d aller
juste le retour pour intel est complet et  parfait , pour la carte nvidia bien que  "direct rendering: Yes" est présent j'ai des doutes (je sais pas si tu a remarqué les deux ont display 0 et screen 0

je vais regarder les logs .

premiere chose le gpu intel prend en charge les 2 écrans (tu le voit par les lignes modeset )


[    26.483] (II) modeset(0): Printing probed modes for output LVDS-1
[    26.483] (II) modeset(0): Modeline "1366x768"x60.1   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)

[    26.621] (II) modeset(0): Printing probed modes for output HDMI-1
[    26.621] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
 



petit souci , un extrait de mon log stretch + mate


[     9.252] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=7f33010e-ca9a-48c8-9fa4-31e227500e8a ro quiet => noyau 4.8
[     9.252] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 17 16:01:55 2016  => la date de création du log
 


le tien , stretch + mate


[    24.661] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=UUID=c9c5a086-1363-43da-8139-639f1a604522 ro quiet => noyau 4.7
[    24.661] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 18 21:11:43 2016  => date de création du log
 



on dirait que tu n'a pas fait la commande


apt-get update & apt-get upgrade
 


ou il y a eu un souci quand tu la fait

enfin cette erreur


[   226.431] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[   226.431] (II) config/udev: Adding drm device (/dev/dri/card1)
[   226.431] (II) xfree86: Adding drm device (/dev/dri/card1)
[   226.431] (EE) /dev/dri/card1: failed to set DRM interface version 1.4: Permission denied
 



et je ne vois plus le chargement du driver "nouveau" sur le log

quand tu a le temps regarde avec synaptic si tu a des paquets en attente de mise a jour (pas la peine de les noter , tu risque d'en avoir beaucoup ) il faut avec le bouton "rafraichir" mettre a jour puis voir l onglet "etat" la liste des paquets qui demande une mise a jour.

avec le bouton "rechercher"  entre le mot "linux-image" et ok
dans la liste
dit moi si linux-headers-4.8.0-1-amd64   et linux-image-4.8.0-1-amd64   sont installé

tu peut vérifier ta version du noyau installé actuellement par


uname -a
 


une super commande a faire en root pour avoir les erreurs depuis le dernier démarrage (évite de reboot , si tu rencontre une erreur (messages ) ça n apporte rien )


journalctl -r -p err
 


poste le retour si pas trop long  tongue
le fabuleux tuto "systemd" des barbus => https://debian-facile.org/doc:system:systemd   cool
on verra pourquoi le noyau ne s'est pas mit a jour

Dernière modification par robert2a (19-11-2016 01:47:46)

Hors ligne

#94 21-11-2016 17:35:37

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Bonjour,

quand tu a le temps regarde avec synaptic si tu a des paquets en attente de mise a jour (pas la peine de les noter , tu risque d'en avoir beaucoup ) il faut avec le bouton "rafraichir" mettre a jour puis voir l onglet "etat" la liste des paquets qui demande une mise a jour.

avec le bouton "rechercher"  entre le mot "linux-image" et ok
dans la liste
dit moi si linux-headers-4.8.0-1-amd64   et linux-image-4.8.0-1-amd64   sont installé


Alors dans Synaptic j'ai "linux-headers-4.8.0-1-amd64" d'installé mais pas "linux-image-4.8.0-1-amd64"
J'ai effectivement pas mal de chose pouvant être mis à jours dans "Etat/installés (pouvant être mis à jour)"

Sinon voici le retour des commandes :

uname -a


Linux Debian 4.7.0-1-amd64 #1 SMP Debian 4.7.8-1 (2016-10-19) x86_64 GNU/Linux

journalctl -r -p err


-- Logs begin at lun. 2016-11-21 16:14:48 CET, end at lun. 2016-11-21 16:23:08 C
nov. 21 16:15:45 Debian pulseaudio[1115]: [pulseaudio] pid.c: Daemon already run
nov. 21 16:15:45 Debian pulseaudio[1113]: [pulseaudio] pid.c: Daemon already run
nov. 21 16:15:01 Debian avahi-daemon[565]: chroot.c: open() failed: No such file
nov. 21 16:15:01 Debian bluetoothd[523]: sap-server: Operation not permitted (1)
nov. 21 16:15:01 Debian bluetoothd[523]: Sap driver initialization failed.
nov. 21 16:15:01 Debian bluetoothd[523]: Failed to obtain handles for "Service C
nov. 21 16:14:48 Debian kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write th
lines 1-8/8 (END)



Je vais de ce pas mettre à jours ce qui peut l'être ... En faisant "Tout mettre à niveau" puis "Appliquer" dans la description de "à installer" se trouve "linux-image-4-8.0-1-amd64" je l'aurais donc bientôt installer smile

Dernière modification par Strato (21-11-2016 17:38:40)

Hors ligne

#95 21-11-2016 18:18:16

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Maintenant :

uname -a

Linux Debian 4.8.0-1-amd64 #1 SMP Debian 4.8.5-1 (2016-10-28) x86_64 GNU/Linux
 

journalctl -r -p err


-- Logs begin at Mon 2016-11-21 17:12:06 CET, end at Mon 2016-11-21 17:15:35 CET. --
nov. 21 17:13:09 Debian pulseaudio[1007]: [pulseaudio] pid.c: Daemon already running.
nov. 21 17:13:09 Debian pulseaudio[1005]: [pulseaudio] pid.c: Daemon already running.
nov. 21 17:12:19 Debian bluetoothd[504]: sap-server: Operation not permitted (1)
nov. 21 17:12:19 Debian bluetoothd[504]: Sap driver initialization failed.
nov. 21 17:12:19 Debian bluetoothd[504]: Failed to obtain handles for "Service Changed" characteris
nov. 21 17:12:19 Debian avahi-daemon[533]: chroot.c: open() failed: No such file or directory
nov. 21 17:12:06 Debian kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
lines 1-8/8 (END)
 

Hors ligne

#96 21-11-2016 18:20:37

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

avec synaptic tu fait réinstaller pour  le headers et  installer pour linux-image-4.8.0-1-amd64  en meme temps que les mises a jours

il te faudra redemarrer a la fin pour vérifier que tu est sur le noyau 4.8

grillé tu la fait déja wink

si tu est en double écran , tu poste ton /var/log/Xorg.0.log  , plutot a partir du bureau pour l'avoir entier
je pense que c'est tout bon maintenant a moins que tu ai une remarque

Dernière modification par robert2a (21-11-2016 18:25:42)

Hors ligne

#97 21-11-2016 18:32:59

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Oui juste une remarque au cas où ce serait important, dans Synaptic dans "Etat/Installés (pouvant être supprimés)" j'ai "linux-image-4.6.0-1-amd64, et dans "Installés (locaux ou obsolètes) 11 paquets apparaissent dont parmis eux "linux-image-4.6.0-1-amd64" et "linux-image-4.7.0-1-amd64".

Hors ligne

#98 21-11-2016 18:36:25

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Sinon voici le Var/log:Xorg.0.log :

[    25.192]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    25.192] X Protocol Version 11, Revision 0
[    25.192] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    25.192] Current Operating System: Linux Debian 4.8.0-1-amd64 #1 SMP Debian 4.8.5-1 (2016-10-28) x86_64
[    25.192] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=c9c5a086-1363-43da-8139-639f1a604522 ro quiet
[    25.192] Build Date: 06 September 2016  01:32:44PM
[    25.192] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[    25.192] Current version of pixman: 0.34.0
[    25.192]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    25.192] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.192] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 21 17:12:24 2016
[    25.221] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.255] (==) No Layout section.  Using the first Screen section.
[    25.255] (==) No screen section available. Using defaults.
[    25.255] (**) |-->Screen "Default Screen Section" (0)
[    25.255] (**) |   |-->Monitor "<default monitor>"
[    25.258] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    25.259] (==) Automatically adding devices
[    25.259] (==) Automatically enabling devices
[    25.259] (==) Automatically adding GPU devices
[    25.259] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    25.314] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    25.314]  Entry deleted from font path.
[    25.339] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    25.339] (==) ModulePath set to "/usr/lib/xorg/modules"
[    25.339] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.340] (II) Loader magic: 0x55fdeef24dc0
[    25.340] (II) Module ABI versions:
[    25.340]  X.Org ANSI C Emulation: 0.4
[    25.340]  X.Org Video Driver: 20.0
[    25.340]  X.Org XInput driver : 22.1
[    25.340]  X.Org Server Extension : 9.0
[    25.341] (++) using VT number 7

[    25.341] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    25.342] (II) xfree86: Adding drm device (/dev/dri/card0)
[    25.360] (--) PCI:*(0:0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    25.360] (II) LoadModule: "glx"
[    25.467] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.642] (II) Module glx: vendor="X.Org Foundation"
[    25.642]  compiled for 1.18.4, module version = 1.0.0
[    25.642]  ABI class: X.Org Server Extension, version 9.0
[    25.642] (==) AIGLX enabled
[    25.642] (==) Matched modesetting as autoconfigured driver 0
[    25.642] (==) Matched fbdev as autoconfigured driver 1
[    25.642] (==) Matched vesa as autoconfigured driver 2
[    25.642] (==) Assigned the driver to the xf86ConfigLayout
[    25.642] (II) LoadModule: "modesetting"
[    25.668] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    25.671] (II) Module modesetting: vendor="X.Org Foundation"
[    25.671]  compiled for 1.18.4, module version = 1.18.4
[    25.671]  Module class: X.Org Video Driver
[    25.671]  ABI class: X.Org Video Driver, version 20.0
[    25.671] (II) LoadModule: "fbdev"
[    25.671] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    25.689] (II) Module fbdev: vendor="X.Org Foundation"
[    25.689]  compiled for 1.18.0, module version = 0.4.4
[    25.689]  Module class: X.Org Video Driver
[    25.689]  ABI class: X.Org Video Driver, version 20.0
[    25.689] (II) LoadModule: "vesa"
[    25.689] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    25.697] (II) Module vesa: vendor="X.Org Foundation"
[    25.697]  compiled for 1.18.0, module version = 2.3.4
[    25.697]  Module class: X.Org Video Driver
[    25.697]  ABI class: X.Org Video Driver, version 20.0
[    25.697] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    25.697] (II) FBDEV: driver for framebuffer: fbdev
[    25.697] (II) VESA: driver for VESA chipsets: vesa
[    25.723] (II) modeset(0): using drv /dev/dri/card0
[    25.723] (WW) Falling back to old probe method for fbdev
[    25.723] (II) Loading sub module "fbdevhw"
[    25.723] (II) LoadModule: "fbdevhw"
[    25.723] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    25.887] (II) Module fbdevhw: vendor="X.Org Foundation"
[    25.887]  compiled for 1.18.4, module version = 0.0.2
[    25.887]  ABI class: X.Org Video Driver, version 20.0
[    25.887] (WW) Falling back to old probe method for vesa
[    25.887] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    25.888] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    25.888] (==) modeset(0): RGB weight 888
[    25.888] (==) modeset(0): Default visual is TrueColor
[    25.888] (II) Loading sub module "glamoregl"
[    25.888] (II) LoadModule: "glamoregl"
[    25.888] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    26.119] (II) Module glamoregl: vendor="X.Org Foundation"
[    26.119]  compiled for 1.18.4, module version = 1.0.0
[    26.119]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.119] (II) glamor: OpenGL accelerated X.org driver based.
[    26.494] (II) glamor: EGL version 1.4 (DRI2):
[    26.693] (II) modeset(0): glamor initialized
[    26.693] (II) modeset(0): Output LVDS-1 has no monitor section
[    26.868] (II) modeset(0): Output VGA-1 has no monitor section
[    26.884] (II) modeset(0): Output HDMI-1 has no monitor section
[    26.963] (II) modeset(0): Output DP-1 has no monitor section
[    26.963] (II) modeset(0): EDID for output LVDS-1
[    26.963] (II) modeset(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    26.963] (II) modeset(0): Year: 2010  Week: 0
[    26.963] (II) modeset(0): EDID Version: 1.3
[    26.963] (II) modeset(0): Digital Display Input
[    26.963] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    26.963] (II) modeset(0): Gamma: 2.20
[    26.963] (II) modeset(0): No DPMS capabilities specified
[    26.963] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    26.963] (II) modeset(0): First detailed timing is preferred mode
[    26.963] (II) modeset(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    26.963] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    26.963] (II) modeset(0): Manufacturer's mask: 0
[    26.963] (II) modeset(0): Supported detailed timing:
[    26.963] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    26.963] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    26.963] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    26.963] (II) modeset(0): Supported detailed timing:
[    26.963] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    26.963] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    26.963] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    26.963] (II) modeset(0):  8MN61€156AT
[    26.963] (II) modeset(0): Unknown vendor-specific block 0
[    26.963] (II) modeset(0): EDID (in hex):
[    26.963] (II) modeset(0):   00ffffffffffff004ca3415400000000
[    26.963] (II) modeset(0):   00140103902213780ac8959e57549226
[    26.963] (II) modeset(0):   0f505400000001010101010101010101
[    26.963] (II) modeset(0):   010101010101f41b5690500015303020
[    26.963] (II) modeset(0):   250058c21000001af41b569050001530
[    26.963] (II) modeset(0):   3020250058c21000001a000000fe0038
[    26.963] (II) modeset(0):   4d4e36318031353641540a2000000000
[    26.963] (II) modeset(0):   00000000000000000001010a2020001d
[    26.963] (II) modeset(0): Printing probed modes for output LVDS-1
[    26.963] (II) modeset(0): Modeline "1366x768"x60.1   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    26.963] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    26.963] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    26.963] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    26.963] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    26.963] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    26.963] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    26.963] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    26.963] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    26.963] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    26.963] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    26.963] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    26.963] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    26.963] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    26.963] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    26.963] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    26.963] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    26.963] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    26.963] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    26.963] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    26.963] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    26.963] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    26.963] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    26.963] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    26.963] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    26.963] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    26.963] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    26.963] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    27.136] (II) modeset(0): EDID for output VGA-1
[    27.152] (II) modeset(0): EDID for output HDMI-1
[    27.152] (II) modeset(0): Manufacturer: IVM  Model: 6113  Serial#: 2214
[    27.152] (II) modeset(0): Year: 2014  Week: 41
[    27.152] (II) modeset(0): EDID Version: 1.3
[    27.152] (II) modeset(0): Digital Display Input
[    27.152] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    27.152] (II) modeset(0): Gamma: 2.20
[    27.152] (II) modeset(0): DPMS capabilities: Off
[    27.152] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    27.152] (II) modeset(0): First detailed timing is preferred mode
[    27.152] (II) modeset(0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    27.152] (II) modeset(0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    27.152] (II) modeset(0): Supported established timings:
[    27.152] (II) modeset(0): 640x480@60Hz
[    27.152] (II) modeset(0): 640x480@67Hz
[    27.152] (II) modeset(0): 800x600@56Hz
[    27.152] (II) modeset(0): 800x600@60Hz
[    27.152] (II) modeset(0): 1024x768@60Hz
[    27.152] (II) modeset(0): Manufacturer's mask: 0
[    27.152] (II) modeset(0): Supported standard timings:
[    27.152] (II) modeset(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    27.152] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    27.152] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    27.152] (II) modeset(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    27.152] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    27.152] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    27.152] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    27.152] (II) modeset(0): Supported detailed timing:
[    27.152] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    27.152] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    27.152] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    27.152] (II) modeset(0): Serial No: 1127844122214
[    27.152] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    27.152] (II) modeset(0): Monitor name: PLE2483H
[    27.152] (II) modeset(0): EDID (in hex):
[    27.152] (II) modeset(0):   00ffffffffffff0026cd1361a6080000
[    27.152] (II) modeset(0):   2918010380351e782a0ef5a555509e26
[    27.152] (II) modeset(0):   105054330800710081408180a940b300
[    27.152] (II) modeset(0):   9500d1c00101023a801871382d40582c
[    27.152] (II) modeset(0):   4500132b2100001e000000ff00313132
[    27.152] (II) modeset(0):   37383434313232323134000000fd0037
[    27.152] (II) modeset(0):   4c1e5311000a202020202020000000fc
[    27.152] (II) modeset(0):   00504c4532343833480a20202020002e
[    27.152] (II) modeset(0): Printing probed modes for output HDMI-1
[    27.152] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    27.153] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    27.153] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    27.153] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    27.153] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    27.153] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    27.153] (II) modeset(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    27.153] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.153] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.153] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.153] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    27.153] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.231] (II) modeset(0): EDID for output DP-1
[    27.232] (II) modeset(0): Output LVDS-1 connected
[    27.232] (II) modeset(0): Output VGA-1 disconnected
[    27.232] (II) modeset(0): Output HDMI-1 connected
[    27.232] (II) modeset(0): Output DP-1 disconnected
[    27.232] (II) modeset(0): Using spanning desktop for initial modes
[    27.232] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    27.232] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[    27.232] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.232] (==) modeset(0): DPI set to (96, 96)
[    27.232] (II) Loading sub module "fb"
[    27.232] (II) LoadModule: "fb"
[    27.232] (II) Loading /usr/lib/xorg/modules/libfb.so
[    27.240] (II) Module fb: vendor="X.Org Foundation"
[    27.240]  compiled for 1.18.4, module version = 1.0.0
[    27.240]  ABI class: X.Org ANSI C Emulation, version 0.4
[    27.241] (II) UnloadModule: "fbdev"
[    27.241] (II) Unloading fbdev
[    27.241] (II) UnloadSubModule: "fbdevhw"
[    27.241] (II) Unloading fbdevhw
[    27.241] (II) UnloadModule: "vesa"
[    27.241] (II) Unloading vesa
[    27.241] (==) Depth 24 pixmap format is 32 bpp
[    27.407] (==) modeset(0): Backing store enabled
[    27.407] (==) modeset(0): Silken mouse enabled
[    27.416] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    27.495] (==) modeset(0): DPMS enabled
[    27.496] (II) modeset(0): [DRI2] Setup complete
[    27.496] (II) modeset(0): [DRI2]   DRI driver: i965
[    27.496] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    27.579] (--) RandR disabled
[    27.589] (II) SELinux: Disabled on system
[    27.628] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    27.628] (II) AIGLX: enabled GLX_ARB_create_context
[    27.628] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    27.628] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    27.628] (II) AIGLX: enabled GLX_INTEL_swap_event
[    27.628] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    27.628] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    27.628] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    27.628] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    27.628] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    27.628] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    27.628] (II) AIGLX: Loaded and initialized i965
[    27.628] (II) GLX: Initialized DRI2 GL provider for screen 0
[    27.720] (II) modeset(0): Damage tracking initialized
[    27.720] (II) modeset(0): Setting screen physical size to 869 x 285
[    28.286] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    28.286] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.286] (II) LoadModule: "libinput"
[    28.286] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    28.389] (II) Module libinput: vendor="X.Org Foundation"
[    28.389]  compiled for 1.18.4, module version = 0.20.0
[    28.389]  Module class: X.Org XInput Driver
[    28.389]  ABI class: X.Org XInput driver, version 22.1
[    28.389] (II) Using input driver 'libinput' for 'Power Button'
[    28.389] (**) Power Button: always reports core events
[    28.389] (**) Option "Device" "/dev/input/event5"
[    28.389] (**) Option "_source" "server/udev"
[    28.390] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.390] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.408] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    28.408] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.408] (**) Option "xkb_model" "pc105"
[    28.408] (**) Option "xkb_layout" "fr"
[    28.408] (**) Option "xkb_variant" "latin9"
[    28.490] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    28.490] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    28.491] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    28.491] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.491] (II) Using input driver 'libinput' for 'Video Bus'
[    28.491] (**) Video Bus: always reports core events
[    28.491] (**) Option "Device" "/dev/input/event8"
[    28.491] (**) Option "_source" "server/udev"
[    28.492] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    28.492] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    28.516] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event8"
[    28.516] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.516] (**) Option "xkb_model" "pc105"
[    28.516] (**) Option "xkb_layout" "fr"
[    28.516] (**) Option "xkb_variant" "latin9"
[    28.517] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    28.517] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    28.518] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    28.518] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    28.518] (II) Using input driver 'libinput' for 'Video Bus'
[    28.518] (**) Video Bus: always reports core events
[    28.518] (**) Option "Device" "/dev/input/event7"
[    28.519] (**) Option "_source" "server/udev"
[    28.519] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.519] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.544] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[    28.544] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    28.544] (**) Option "xkb_model" "pc105"
[    28.544] (**) Option "xkb_layout" "fr"
[    28.544] (**) Option "xkb_variant" "latin9"
[    28.545] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    28.545] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    28.545] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.546] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    28.546] (II) Using input driver 'libinput' for 'Power Button'
[    28.546] (**) Power Button: always reports core events
[    28.546] (**) Option "Device" "/dev/input/event2"
[    28.546] (**) Option "_source" "server/udev"
[    28.546] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.546] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.560] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    28.560] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    28.560] (**) Option "xkb_model" "pc105"
[    28.560] (**) Option "xkb_layout" "fr"
[    28.560] (**) Option "xkb_variant" "latin9"
[    28.561] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    28.561] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    28.562] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    28.562] (II) No input driver specified, ignoring this device.
[    28.562] (II) This device may have been added with another device file.
[    28.563] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    28.563] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    28.563] (II) Using input driver 'libinput' for 'Sleep Button'
[    28.563] (**) Sleep Button: always reports core events
[    28.563] (**) Option "Device" "/dev/input/event3"
[    28.563] (**) Option "_source" "server/udev"
[    28.564] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.564] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.584] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    28.584] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    28.584] (**) Option "xkb_model" "pc105"
[    28.584] (**) Option "xkb_layout" "fr"
[    28.584] (**) Option "xkb_variant" "latin9"
[    28.585] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    28.585] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    28.587] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event14)
[    28.587] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[    28.587] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[    28.587] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    28.587] (**) Option "Device" "/dev/input/event14"
[    28.587] (**) Option "_source" "server/udev"
[    28.588] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    28.588] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    28.628] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input15/event14"
[    28.628] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    28.628] (**) Option "xkb_model" "pc105"
[    28.628] (**) Option "xkb_layout" "fr"
[    28.628] (**) Option "xkb_variant" "latin9"
[    28.629] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    28.629] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    28.630] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    28.630] (II) No input driver specified, ignoring this device.
[    28.630] (II) This device may have been added with another device file.
[    28.630] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    28.630] (II) No input driver specified, ignoring this device.
[    28.630] (II) This device may have been added with another device file.
[    28.631] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    28.631] (II) No input driver specified, ignoring this device.
[    28.631] (II) This device may have been added with another device file.
[    28.631] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    28.632] (II) No input driver specified, ignoring this device.
[    28.632] (II) This device may have been added with another device file.
[    28.632] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    28.632] (II) No input driver specified, ignoring this device.
[    28.632] (II) This device may have been added with another device file.
[    28.633] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    28.633] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    28.633] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    28.633] (**) AT Translated Set 2 keyboard: always reports core events
[    28.633] (**) Option "Device" "/dev/input/event0"
[    28.633] (**) Option "_source" "server/udev"
[    28.634] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.634] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.692] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    28.692] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    28.692] (**) Option "xkb_model" "pc105"
[    28.692] (**) Option "xkb_layout" "fr"
[    28.692] (**) Option "xkb_variant" "latin9"
[    28.693] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    28.693] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    28.694] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    28.694] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    28.694] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    28.694] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    28.694] (**) Option "Device" "/dev/input/event1"
[    28.694] (**) Option "_source" "server/udev"
[    28.695] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.695] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.724] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    28.724] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    28.725] (**) Option "AccelerationScheme" "none"
[    28.725] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    28.725] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    28.725] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    28.725] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    28.725] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    28.726] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    28.726] (II) No input driver specified, ignoring this device.
[    28.726] (II) This device may have been added with another device file.
[    28.727] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    28.727] (II) No input driver specified, ignoring this device.
[    28.727] (II) This device may have been added with another device file.
[    58.358] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    58.359] (II) modeset(0): Printing DDC gathered Modelines:
[    58.359] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    58.628] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    58.628] (II) modeset(0): Printing DDC gathered Modelines:
[    58.628] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    59.026] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    59.026] (II) modeset(0): Printing DDC gathered Modelines:
[    59.026] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    59.298] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    59.298] (II) modeset(0): Printing DDC gathered Modelines:
[    59.298] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    61.540] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    61.540] (II) modeset(0): Printing DDC gathered Modelines:
[    61.540] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[   452.948] (II) Axis 0x1 value 1233 is outside expected range [1242, 4894]
See https://wayland.freedesktop.org/libinput/doc/1.5.0//absolute_coordinate_ranges.html for details

Hors ligne

#99 21-11-2016 18:39:13

robert2a
Membre
Lieu : France
Distrib. : Stretch
Noyau : Linux 4.8.0-1-amd64
(G)UI : Mate 1.16.1
Inscription : 15-11-2014

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

tu peut tout désinstaller , les 11 paquets

Hors ligne

#100 21-11-2016 18:52:25

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Deuxième écran HDMI non reconnu / bug / carte graphique ?

Voilà, j'ai tout "Supprimé" et redémarré. Il reste dans Synaptic "Etat/Non installés (résidus de configuration)" : linux-image-4.6.0-1-amd64 et linux-image-4.7.0-1-amd64, je peut soit sélectionner pour installer soit sélectionner pour suppression complète. Je les supprimes complètement ?

Hors ligne

Pied de page des forums