Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 21-12-2016 16:07:28

lagrenouille
Adhérent(e)
Lieu : dark-monde
Distrib. : jessie et stretch
Noyau : Debian -amd64 - noyau.4.9
(G)UI : env i3 - bépo - weechat
Inscription : 28-03-2012
Site Web

DD extrne

Salut

je galère depuis hier avec ce DD
je l'ai formaté en ext4 avec gparted
hier j'ai réussi à le monter, it était très lent au début, puis ça s'est amélioré, j'ai pu faire toutes mes sauvegardes dessus

ce matin je peux pas le démonter
j'ai débranché à la sauvage un peu énervè...
mais plus moyen de le monter, même rebooter pour voir avec le DD branché


Impossible de démonter « Volume de 2,0 TB ».

Error unmounting /dev/sdf1: Command-line `umount  "/media/momo/b7f7d953-7058-4a59-a79e-ef2d3696246f"' exited with non-zero exit status 32: umount: /media/momo/b7f7d953-7058-4a59-a79e-ef2d3696246f : cible occupée
       (Dans certains cas, des renseignements sur les processus utilisant
        le périphérique sont accessibles avec lsof(8) ou fuser(1).)



message console à

mount -t "ext4" -o "uhelper=udisks2,nodev,nosuid" "/dev/sdb1" "/media/momo/b7f7d953-7058-4a59-a79e-ef2d3696246f"


mount: le point de montage /media/momo/b7f7d953-7058-4a59-a79e-ef2d3696246f n'existe pas
root@agamemnon:/home/momo# mount -t "ext4" -o "uhelper=udisks2,nodev,nosuid" "/dev/sdb1" "/media/momo/b7f7d953-7058-4a59-a79e-ef2d3696246f"
mount: mauvais type de système de fichiers, option erronée, superbloc erroné
        sur /dev/sdb1, page de code ou programme auxiliaire manquant, ou autre erreur

        Dans certains cas des renseignements utiles sont dans le journal
        système — essayez « dmesg | tail » ou quelque chose du genre.


/home/momo# dmesg


[    0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-4) ) #1 SMP Debian 4.6.2-2 (2016-06-25)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=71d4c532-c8d0-4b93-9dd8-c8a0711a2201 ro single
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd709fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd70a000-0x00000000dda1bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dda1c000-0x00000000dda2bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dda2c000-0x00000000ddb4bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ddb4c000-0x00000000de82bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de82c000-0x00000000de82cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de82d000-0x00000000de86ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de870000-0x00000000deca1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000deca2000-0x00000000deff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/P8H61-M LX3 PLUS R2.0, BIOS 1102 06/04/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FF0000000 write-back
[    0.000000]   2 base 210000000 mask FF8000000 write-back
[    0.000000]   3 base 218000000 mask FFC000000 write-back
[    0.000000]   4 base 21C000000 mask FFE000000 write-back
[    0.000000]   5 base 21E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd740-0x000fd74f] mapped at [ffff8800000fd740]
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[    0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[    0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[    0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
[    0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
[    0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35de1000-0x36ee7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DDA20078 00006C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DDA29E30 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DDA20180 009CAF (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DDB4A080 000040
[    0.000000] ACPI: APIC 0x00000000DDA29F40 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DDA29FB8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DDA2A000 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DDA2A040 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DDA2A078 000495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: BGRT 0x00000000DDA2B9B0 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DDA2A568 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DDA2AF18 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21eff2000-0x21eff6fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dd709fff]
[    0.000000]   node   0: [mem 0x00000000de82c000-0x00000000de82cfff]
[    0.000000]   node   0: [mem 0x00000000de870000-0x00000000deca1fff]
[    0.000000]   node   0: [mem 0x00000000deff4000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.000000] On node 0 totalpages: 2083558
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14126 pages used for memmap
[    0.000000]   DMA32 zone: 904009 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd70a000-0xdda1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdda1c000-0xdda2bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdda2c000-0xddb4bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xddb4c000-0xde82bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xde82d000-0xde86ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdeca2000-0xdeff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88021ec00000 s93720 r8192 d29160 u524288
[    0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2050979
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=71d4c532-c8d0-4b93-9dd8-c8a0711a2201 ro single
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8105216K/8334232K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 229016K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3300.169 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.33 BogoMIPS (lpj=13200676)
[    0.000134] pid_max: default: 32768 minimum: 301
[    0.000195] ACPI: Core revision 20160108
[    0.004958] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.005130] Security Framework initialized
[    0.005184] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.005244] AppArmor: AppArmor disabled by boot time parameter
[    0.005656] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.007229] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.007960] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008024] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.008354] Disabling memory control group subsystem
[    0.008431] CPU: Physical Processor ID: 0
[    0.008484] CPU: Processor Core ID: 0
[    0.008540] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008595] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.008653] mce: CPU supports 7 MCE banks
[    0.008715] CPU0: Thermal monitoring enabled (TM1)
[    0.008773] process: using mwait in idle threads
[    0.008828] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.008883] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009250] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
[    0.010782] ftrace: allocating 24381 entries in 96 pages
[    0.018265] smpboot: Max logical packages: 2
[    0.018321] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.018764] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058505] TSC deadline timer enabled
[    0.058507] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.058706] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.058988] ... version:                3
[    0.059041] ... bit width:              48
[    0.059094] ... generic registers:      4
[    0.059147] ... value mask:             0000ffffffffffff
[    0.059202] ... max period:             0000ffffffffffff
[    0.059256] ... fixed-purpose events:   3
[    0.059309] ... event mask:             000000070000000f
[    0.059752] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.059891] x86: Booting SMP configuration:
[    0.059945] .... node  #0, CPUs:      #1 #2 #3
[    0.300625] x86: Booted up 1 node, 4 CPUs
[    0.300731] smpboot: Total of 4 processors activated (26404.30 BogoMIPS)
[    0.303244] devtmpfs: initialized
[    0.303346] x86/mm: Memory block size: 128MB
[    0.305326] PM: Registering ACPI NVS region [mem 0xdda2c000-0xddb4bfff] (1179648 bytes)
[    0.305409] PM: Registering ACPI NVS region [mem 0xde82d000-0xde86ffff] (274432 bytes)
[    0.305537] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.305652] pinctrl core: initialized pinctrl subsystem
[    0.305807] NET: Registered protocol family 16
[    0.315015] cpuidle: using governor ladder
[    0.320587] cpuidle: using governor menu
[    0.320723] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.322976] ACPI: bus type PCI registered
[    0.323030] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.323144] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.323213] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.323274] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.323395] PCI: Using configuration type 1 for base access
[    0.323466] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.332746] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.332983] ACPI: Added _OSI(Module Device)
[    0.333038] ACPI: Added _OSI(Processor Device)
[    0.333092] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.333146] ACPI: Added _OSI(Processor Aggregator Device)
[    0.333475] ACPI: Executed 1 blocks of module-level executable AML code
[    0.336168] ACPI: Dynamic OEM Table Load:
[    0.336305] ACPI: SSDT 0xFFFF8802160A3000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.336806] ACPI: Dynamic OEM Table Load:
[    0.336942] ACPI: SSDT 0xFFFF880214D24800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.337381] ACPI: Dynamic OEM Table Load:
[    0.337515] ACPI: SSDT 0xFFFF88021609FE00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.338238] ACPI: Interpreter enabled
[    0.338304] ACPI: (supports S0 S3 S4 S5)
[    0.338358] ACPI: Using IOAPIC for interrupt routing
[    0.338430] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.342387] ACPI: Power Resource [FN00] (off)
[    0.342502] ACPI: Power Resource [FN01] (off)
[    0.342615] ACPI: Power Resource [FN02] (off)
[    0.342728] ACPI: Power Resource [FN03] (off)
[    0.342840] ACPI: Power Resource [FN04] (off)
[    0.343307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.343366] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.343515] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.343655] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.343712] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.344077] PCI host bridge to bus 0000:00
[    0.344132] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.344189] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.344245] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.344311] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.344377] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.344443] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.344508] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.344574] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.344648] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.344715] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.344781] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.344842] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.344915] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.344939] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.344972] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.345078] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.345097] pci 0000:00:16.0: reg 0x10: [mem 0xf7109000-0xf710900f 64bit]
[    0.345165] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.345231] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.345246] pci 0000:00:1a.0: reg 0x10: [mem 0xf7107000-0xf71073ff]
[    0.345323] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.345369] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.345454] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.345469] pci 0000:00:1b.0: reg 0x10: [mem 0xf7100000-0xf7103fff 64bit]
[    0.345534] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.345571] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.345661] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.345780] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.345826] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.345912] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.345980] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.346017] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.346102] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.346117] pci 0000:00:1d.0: reg 0x10: [mem 0xf7106000-0xf71063ff]
[    0.346194] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.346237] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.346322] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.346468] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
[    0.346479] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.346485] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.346491] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.346498] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.346504] pci 0000:00:1f.2: reg 0x20: [io  0xf090-0xf09f]
[    0.346510] pci 0000:00:1f.2: reg 0x24: [io  0xf080-0xf08f]
[    0.346587] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.346600] pci 0000:00:1f.3: reg 0x10: [mem 0xf7105000-0xf71050ff 64bit]
[    0.346618] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.346687] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
[    0.346698] pci 0000:00:1f.5: reg 0x10: [io  0xf070-0xf077]
[    0.346704] pci 0000:00:1f.5: reg 0x14: [io  0xf060-0xf063]
[    0.346711] pci 0000:00:1f.5: reg 0x18: [io  0xf050-0xf057]
[    0.346717] pci 0000:00:1f.5: reg 0x1c: [io  0xf040-0xf043]
[    0.346723] pci 0000:00:1f.5: reg 0x20: [io  0xf030-0xf03f]
[    0.346729] pci 0000:00:1f.5: reg 0x24: [io  0xf020-0xf02f]
[    0.346833] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
[    0.346840] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.346847] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.346854] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.346859] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.346864] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.346924] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[    0.346932] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    0.352625] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.352687] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.352690] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.352695] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.352768] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.352895] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.352917] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.352948] pci 0000:03:00.0: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    0.352968] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    0.353080] pci 0000:03:00.0: supports D1 D2
[    0.353081] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.353122] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.360631] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.360694] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.360703] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.361023] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.361557] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.362088] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
[    0.362619] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.363149] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.363770] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.364300] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.364835] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.365509] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.365715] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.365772] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.365838] vgaarb: loaded
[    0.365890] vgaarb: bridge control possible 0000:01:00.0
[    0.366009] PCI: Using ACPI for IRQ routing
[    0.367448] PCI: pci_cache_line_size set to 64 bytes
[    0.367482] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.367484] e820: reserve RAM buffer [mem 0xdd70a000-0xdfffffff]
[    0.367485] e820: reserve RAM buffer [mem 0xde82d000-0xdfffffff]
[    0.367486] e820: reserve RAM buffer [mem 0xdeca2000-0xdfffffff]
[    0.367487] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.367488] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.367612] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.368030] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.370102] clocksource: Switched to clocksource hpet
[    0.374256] VFS: Disk quotas dquot_6.6.0
[    0.374331] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.374494] pnp: PnP ACPI init
[    0.374631] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.374690] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.374748] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.374805] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.374861] system 00:01: [io  0xffff] has been reserved
[    0.374916] system 00:01: [io  0xffff] has been reserved
[    0.374971] system 00:01: [io  0x0400-0x0453] could not be reserved
[    0.375027] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.375083] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.375139] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.375195] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375215] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.375250] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.375307] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.375369] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.375426] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375464] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.375521] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.375683] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.375740] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.375796] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.375853] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.375909] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.375966] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.376022] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.376078] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.376135] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.376191] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.376248] system 00:06: [mem 0xf2200000-0xf2200fff] has been reserved
[    0.376305] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.376392] pnp: PnP ACPI: found 7 devices
[    0.382232] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.382327] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.382382] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.382439] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.382496] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.382564] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.382633] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.382688] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.382749] pci 0000:00:1c.5:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.382819] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.382820] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.382822] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.382823] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.382824] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.382825] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.382826] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.382827] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.382828] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.382829] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.382830] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.382831] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.382832] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.382833] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.382834] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    0.382877] NET: Registered protocol family 2
[    0.383059] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.383216] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.383379] TCP: Hash tables configured (established 65536 bind 65536)
[    0.383452] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.383527] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.383645] NET: Registered protocol family 1
[    0.422231] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.422305] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.422344] Unpacking initramfs...
[    0.639851] Freeing initrd memory: 17436K (ffff880035de1000 - ffff880036ee8000)
[    0.639926] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.639983] software IO TLB [mem 0xd970a000-0xdd70a000] (64MB) mapped at [ffff8800d970a000-ffff8800dd709fff]
[    0.640093] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    0.640159] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    0.640214] RAPL PMU: hw unit of domain package 2^-16 Joules
[    0.640269] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    0.640636] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.640718] audit: initializing netlink subsys (disabled)
[    0.640787] audit: type=2000 audit(1482327810.640:1): initialized
[    0.641166] Initialise system trusted keyring
[    0.641292] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[    0.641364] zbud: loaded
[    0.673498] Key type asymmetric registered
[    0.673554] Asymmetric key parser 'x509' registered
[    0.673624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.673711] io scheduler noop registered
[    0.673766] io scheduler deadline registered
[    0.673828] io scheduler cfq registered (default)
[    0.674257] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.674318] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.674389] intel_idle: MWAIT substates: 0x1120
[    0.674390] intel_idle: v0.4.1 model 0x3A
[    0.674481] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.674505] GHES: HEST is not enabled!
[    0.674603] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.674943] Linux agpgart interface v0.103
[    0.675032] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.675088] AMD IOMMUv2 functionality not available on this system
[    0.675377] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.677805] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.677862] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.678013] mousedev: PS/2 mouse device common for all mice
[    0.678103] rtc_cmos 00:02: RTC can wake from S4
[    0.678301] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.678382] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.680640] Intel P-state driver initializing.
[    0.734158] ledtrig-cpu: registered to indicate activity on CPUs
[    0.735035] NET: Registered protocol family 10
[    0.735339] mip6: Mobile IPv6
[    0.735399] NET: Registered protocol family 17
[    0.735461] mpls_gso: MPLS GSO support
[    0.735754] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
[    0.735822] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
[    0.735891] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c
[    0.735959] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c
[    0.736078] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.736340] registered taskstats version 1
[    0.736425] Loading compiled-in X.509 certificates
[    0.738286] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.738799] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.738903] zswap: loaded using pool lzo/zbud
[    0.739396] rtc_cmos 00:02: setting system clock to 2016-12-21 13:43:31 UTC (1482327811)
[    0.739597] PM: Hibernation image not present or could not be loaded.
[    0.741097] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
[    0.741168] Write protecting the kernel read-only data: 10240k
[    0.741508] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
[    0.745988] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
[    0.756584] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.773167] random: systemd-udevd urandom read with 3 bits of entropy available
[    0.795142] fjes: module verification failed: signature and/or required key missing - tainting kernel
[    0.795485] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.803590] thermal LNXTHERM:00: registered as thermal_zone0
[    0.803657] ACPI: Thermal Zone [TZ00] (28 C)
[    0.804120] thermal LNXTHERM:01: registered as thermal_zone1
[    0.804195] ACPI: Thermal Zone [TZ01] (30 C)
[    0.806549] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.806623] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.807084] ACPI: bus type USB registered
[    0.807182] usbcore: registered new interface driver usbfs
[    0.807263] usbcore: registered new interface driver hub
[    0.807387] usbcore: registered new device driver usb
[    0.807614] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc90000c6a000, 08:60:6e:7e:4e:46, XID 08000800 IRQ 25
[    0.807692] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.808128] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.808246] SCSI subsystem initialized
[    0.808397] ehci-pci: EHCI PCI platform driver
[    0.808655] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.808722] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.808808] ehci-pci 0000:00:1a.0: debug port 2
[    0.809824] libata version 3.00 loaded.
[    0.812787] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.812811] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7107000
[    0.822157] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.822435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.822502] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.822576] usb usb1: Product: EHCI Host Controller
[    0.822637] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    0.822700] usb usb1: SerialNumber: 0000:00:1a.0
[    0.823106] hub 1-0:1.0: USB hub found
[    0.823178] hub 1-0:1.0: 2 ports detected
[    0.823595] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.823660] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.823746] ehci-pci 0000:00:1d.0: debug port 2
[    0.827707] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.827746] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7106000
[    0.828789] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    0.838146] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.838246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.838305] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.838372] usb usb2: Product: EHCI Host Controller
[    0.838428] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[    0.838485] usb usb2: SerialNumber: 0000:00:1d.0
[    0.838714] hub 2-0:1.0: USB hub found
[    0.838776] hub 2-0:1.0: 2 ports detected
[    0.839000] ata_piix 0000:00:1f.2: version 2.13
[    0.839111] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.994115] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[    0.995070] scsi host0: ata_piix
[    0.995292] scsi host1: ata_piix
[    0.995414] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[    0.995477] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[    0.995694] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.134107] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.150102] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.150108] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    1.150675] scsi host2: ata_piix
[    1.150887] scsi host3: ata_piix
[    1.151029] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[    1.151097] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[    1.161571] ata2.00: ATA-8: ST31000528AS, CC38, max UDMA/133
[    1.161633] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.166605] ata2.00: configured for UDMA/133
[    1.166916] scsi 1:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
[    1.266451] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.266516] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.267005] hub 1-1:1.0: USB hub found
[    1.267152] hub 1-1:1.0: 4 ports detected
[    1.290467] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.290531] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.291005] hub 2-1:1.0: USB hub found
[    1.291150] hub 2-1:1.0: 6 ports detected
[    1.319257] ata4.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[    1.323929] ata4.00: configured for UDMA/100
[    1.328341] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
[    1.338735] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.338882] sd 1:0:0:0: [sda] Write Protect is off
[    1.338950] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.338980] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.348957] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.349039] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.349235] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.383631]  sda: sda1 sda2 sda3
[    1.384302] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.538101] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    1.562073] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[    1.638075] tsc: Refined TSC clocksource calibration: 3300.023 MHz
[    1.638140] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f91626a655, max_idle_ns: 440795305688 ns
[    1.676168] usb 2-1.1: New USB device found, idVendor=1e54, idProduct=2030
[    1.676245] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.676315] usb 2-1.1: Product: USB Keyboard
[    1.676376] usb 2-1.1: Manufacturer: TypeMatrix.com
[    1.679403] hidraw: raw HID events driver (C) Jiri Kosina
[    1.702247] usbcore: registered new interface driver usbhid
[    1.702309] usbhid: USB HID core driver
[    1.703333] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1E54:2030.0001/input/input3
[    1.711374] usb 1-1.2: New USB device found, idVendor=0bc2, idProduct=ab26
[    1.711439] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.711511] usb 1-1.2: Product: BUP Slim BK
[    1.711568] usb 1-1.2: Manufacturer: Seagate
[    1.711625] usb 1-1.2: SerialNumber: NA96NNY8
[    1.713469] usbcore: registered new interface driver usb-storage
[    1.714283] scsi host4: uas
[    1.714423] usbcore: registered new interface driver uas
[    1.715124] scsi 4:0:0:0: Direct-Access     Seagate  BUP Slim BK      0108 PQ: 0 ANSI: 6
[    1.738894] sd 4:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.738968] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[    1.739992] sd 4:0:0:0: [sdb] Write Protect is off
[    1.740052] sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08
[    1.740617] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.746080] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[    1.758240] hid-generic 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-1.1/input0
[    1.761715] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1E54:2030.0002/input/input4
[    1.782074] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    1.814226] hid-generic 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-1.1/input1
[    1.838604] usb 2-1.2: New USB device found, idVendor=0409, idProduct=005a
[    1.838668] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.839076] hub 2-1.2:1.0: USB hub found
[    1.839291] hub 2-1.2:1.0: 4 ports detected
[    1.877185] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6364
[    1.877248] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.877317] usb 1-1.3: Product: Mass Storage Device
[    1.877375] usb 1-1.3: Manufacturer: Generic
[    1.877431] usb 1-1.3: SerialNumber: 058F63646476
[    1.878107] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    1.878420] scsi host5: usb-storage 1-1.3:1.0
[    1.882572] hid-generic 0003:058F:6364.0003: hiddev0,hidraw2: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.3/input1
[    1.910073] usb 2-1.3: new low-speed USB device number 5 using ehci-pci
[    2.005320] usb 2-1.3: New USB device found, idVendor=04b3, idProduct=310b
[    2.005385] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.008538] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:04B3:310B.0004/input/input5
[    2.008759] hid-generic 0003:04B3:310B.0004: input,hidraw3: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.0-1.3/input0
[    2.365676]  sdb: sdb1
[    2.368466] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.494291] PM: Starting manual resume from disk
[    2.494365] PM: Hibernation image partition 8:2 present
[    2.494367] PM: Looking for hibernation image.
[    2.494659] PM: Image not found (code -22)
[    2.494662] PM: Hibernation image not present or could not be loaded.
[    2.638145] clocksource: Switched to clocksource tsc
[    2.698068] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.879026] scsi 5:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    2.879725] scsi 5:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    2.880498] scsi 5:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    2.881354] scsi 5:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    2.888315] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    2.889063] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[    2.889687] sd 5:0:0:2: [sde] Attached SCSI removable disk
[    2.890464] sd 5:0:0:3: [sdf] Attached SCSI removable disk
[    3.059345] random: nonblocking pool is initialized
[    3.803933] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.878772] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.879023] systemd[1]: Detected architecture x86-64.
[    3.896459] systemd[1]: Set hostname to <agamemnon>.
[    4.725261] systemd[1]: Listening on udev Kernel Socket.
[    4.725853] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.726313] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.726708] systemd[1]: Reached target Encrypted Volumes.
[    4.727232] systemd[1]: Created slice System Slice.
[    4.742029] systemd[1]: Mounting Debug File System...
[    4.742422] systemd[1]: Listening on udev Control Socket.
[    4.742940] systemd[1]: Listening on Journal Audit Socket.
[    4.789667] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.790155] systemd[1]: Listening on Journal Socket.
[    4.826112] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.827035] systemd[1]: Starting Journal Service...
[    4.827999] systemd[1]: Mounting Huge Pages File System...
[    4.886132] systemd[1]: Starting Load Kernel Modules...
[    4.886642] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.887557] systemd[1]: Mounting POSIX Message Queue File System...
[    4.887912] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.888847] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.094077] systemd[1]: Starting Set the console keyboard layout...
[    5.095707] systemd[1]: Started Journal Service.
[    5.153469] lp: driver loaded but no devices found
[    5.308690] ppdev: user-space parallel port driver
[    5.356564] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.646307] systemd-journald[208]: Received request to flush runtime journal from PID 1
[    6.589894] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    6.589967] ACPI: Power Button [PWRB]
[    6.590071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    6.590140] ACPI: Power Button [PWRF]
[    6.596728] wmi: Mapper loaded
[    6.847536] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    6.847620] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    6.847700] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.847871] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    6.847950] sd 5:0:0:1: Attached scsi generic sg4 type 0
[    6.848026] sd 5:0:0:2: Attached scsi generic sg5 type 0
[    6.848103] sd 5:0:0:3: Attached scsi generic sg6 type 0
[    6.873565] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    6.916610] EDAC MC: Ver: 3.0.0
[    7.105540] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.135001] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
[    7.135185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.135400] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160108/utaddress-255)
[    7.135579] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.135650] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    7.135815] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160108/utaddress-255)
[    7.135987] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.136059] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    7.136231] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160108/utaddress-255)
[    7.136408] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.136477] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160108/utaddress-255)
[    7.136642] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160108/utaddress-255)
[    7.136808] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.136876] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.561496] snd_hda_intel 0000:01:00.1: Disabling MSI
[    7.561560] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.653598] [drm] Initialized drm 1.1.0 20060810
[    7.792738] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[    7.792816] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.792886] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[    7.795204] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    7.795266] snd_hda_codec_via hdaudioC0D0:    inputs:
[    7.795328] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[    7.795391] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[    7.795453] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[    7.801746] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.801931] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.802093] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.802262] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.802444] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.810724] asus_wmi: ASUS WMI generic driver loaded
[    7.864434] asus_wmi: Initialization: 0x0
[    7.864512] asus_wmi: BIOS WMI version: 0.9
[    7.864597] asus_wmi: SFUN value: 0x0
[    7.864913] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
[    7.865139] asus_wmi: Number of fans: 1
[    7.870317] iTCO_vendor_support: vendor-support=0
[    7.871776] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.871882] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    7.872077] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.031839] nouveau 0000:01:00.0: NVIDIA GT218 (0a8280b1)
[    8.145614] nouveau 0000:01:00.0: bios: version 70.18.70.00.06
[    8.146156] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[    8.437285] kvm: disabled by bios
[    8.506313] kvm: disabled by bios
[    8.510140] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    8.510300] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    8.510453] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    8.510604] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[    8.586349] kvm: disabled by bios
[    8.682320] kvm: disabled by bios
[    9.445769] [TTM] Zone  kernel: Available graphics memory: 4062802 kiB
[    9.445842] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    9.445898] [TTM] Initializing pool allocator
[    9.445955] [TTM] Initializing DMA pool allocator
[    9.446018] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    9.446073] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    9.446130] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    9.446185] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    9.446240] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00020030
[    9.446297] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000000
[    9.446353] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011362 00020010
[    9.446409] nouveau 0000:01:00.0: DRM: DCB outp 03: 01022310 00000000
[    9.446465] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    9.446520] nouveau 0000:01:00.0: DRM: DCB conn 01: 00002161
[    9.446575] nouveau 0000:01:00.0: DRM: DCB conn 02: 00000200
[    9.487695] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.487753] [drm] Driver supports precise vblank timestamp query.
[    9.538112] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[    9.641392] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo ffff8800d8684400
[    9.641519] fbcon: nouveaufb (fb0) is primary device
[    9.689858] intel_rapl: Found RAPL domain package
[    9.689860] intel_rapl: Found RAPL domain core
[    9.689865] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.729605] Console: switching to colour frame buffer device 210x65
[    9.732342] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    9.741711] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    9.769136] Adding 7812092k swap on /dev/sda2.  Priority:-1 extents:1 across:7812092k FS
[   11.014044] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   23.518385] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.567573] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168f-1.fw
[   23.668063] r8169 0000:03:00.0 enp3s0: link down
[   23.668064] r8169 0000:03:00.0 enp3s0: link down
[   23.668129] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   25.213069] r8169 0000:03:00.0 enp3s0: link up
[   25.213093] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   74.769561] JBD2: Invalid checksum recovering block 21 in log
[   75.352423] JBD2: Invalid checksum recovering block 176 in log
[   75.353884] JBD2: Invalid checksum recovering block 176 in log
[   78.167013] JBD2: recovery failed
[   78.167031] EXT4-fs (sdb1): error loading journal
[  224.546747] usb 1-1.2: USB disconnect, device number 3
[  224.547389] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[  224.670412] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  228.074216] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
[  228.247895] usb 1-1.1: New USB device found, idVendor=0bc2, idProduct=ab26
[  228.247911] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  228.247913] usb 1-1.1: Product: BUP Slim BK
[  228.247915] usb 1-1.1: Manufacturer: Seagate
[  228.247917] usb 1-1.1: SerialNumber: NA96NNY8
[  228.248725] scsi host4: uas
[  228.249535] scsi 4:0:0:0: Direct-Access     Seagate  BUP Slim BK      0108 PQ: 0 ANSI: 6
[  228.298756] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  231.578169] sd 4:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[  231.578175] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[  231.579348] sd 4:0:0:0: [sdb] Write Protect is off
[  231.579363] sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08
[  231.579846] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  231.617635]  sdb: sdb1
[  231.620108] sd 4:0:0:0: [sdb] Attached SCSI disk
[  240.904999] JBD2: Invalid checksum recovering block 21 in log
[  241.550799] JBD2: Invalid checksum recovering block 176 in log
[  241.552502] JBD2: Invalid checksum recovering block 176 in log
[  244.026550] JBD2: recovery failed
[  244.026559] EXT4-fs (sdb1): error loading journal
[  592.911879] usb 1-1.1: USB disconnect, device number 5
[  592.912967] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[  593.032087] sd 4:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  614.867461] usb 1-1.1: new high-speed USB device number 6 using ehci-pci
[  615.040873] usb 1-1.1: New USB device found, idVendor=0bc2, idProduct=ab26
[  615.040879] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  615.040881] usb 1-1.1: Product: BUP Slim BK
[  615.040883] usb 1-1.1: Manufacturer: Seagate
[  615.040885] usb 1-1.1: SerialNumber: NA96NNY8
[  615.041748] scsi host4: uas
[  615.042733] scsi 4:0:0:0: Direct-Access     Seagate  BUP Slim BK      0108 PQ: 0 ANSI: 6
[  615.072065] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  618.623546] sd 4:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[  618.623552] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[  618.624528] sd 4:0:0:0: [sdb] Write Protect is off
[  618.624533] sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08
[  618.625028] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  618.663052]  sdb: sdb1
[  618.665819] sd 4:0:0:0: [sdb] Attached SCSI disk
[  627.755223] JBD2: Invalid checksum recovering block 21 in log
[  628.347095] JBD2: Invalid checksum recovering block 176 in log
[  628.348562] JBD2: Invalid checksum recovering block 176 in log
[  630.787726] JBD2: recovery failed
[  630.787744] EXT4-fs (sdb1): error loading journal
[  757.414558] JBD2: Invalid checksum recovering block 21 in log
[  757.994340] JBD2: Invalid checksum recovering block 176 in log
[  757.995935] JBD2: Invalid checksum recovering block 176 in log
[  760.459611] JBD2: recovery failed
[  760.459621] EXT4-fs (sdb1): error loading journal
[  766.743972] JBD2: Invalid checksum recovering block 21 in log
[  767.329606] JBD2: Invalid checksum recovering block 176 in log
[  767.331100] JBD2: Invalid checksum recovering block 176 in log
[  769.739492] JBD2: recovery failed
[  769.739501] EXT4-fs (sdb1): error loading journal
root@agamemnon:/home/momo#



je comprends pas et je sais pas réparer, si on m’aide je serai content

vais faire les courses et je reviens

Edit à toto :
Séparé les lignes de commande de leurs retours.


Si tu n’aimes pas windows, dégoûtes-en les autres !

Hors ligne

#2 21-12-2016 16:29:52

raleur
Membre
Inscription : 03-10-2014

Re : DD extrne

Pas d'erreur physique, mais des erreurs logiques que la récupération automatique au montage n'arrive pas à corriger. je tenterais un fsck.

Dernière modification par raleur (21-12-2016 16:30:46)

Hors ligne

#3 21-12-2016 17:44:57

lagrenouille
Adhérent(e)
Lieu : dark-monde
Distrib. : jessie et stretch
Noyau : Debian -amd64 - noyau.4.9
(G)UI : env i3 - bépo - weechat
Inscription : 28-03-2012
Site Web

Re : DD extrne

/home/momo#

fsck


fsck de util-linux 2.29
e2fsck 1.43.3 (04-Sep-2016)
/dev/sda1 est monté.
e2fsck: Ne peut continuer, arrêt immédiat.
 


scratchhead.gif



/home/momo#

mount /dev/sdb


sdb   sdb1  



root@agamemnon:/home/momo#

mount /dev/sdb1


mount: impossible de trouver /dev/sdb1 dans /etc/fstab



Edit à toto :
Mis les balises root séparées de leurs retours.

Dernière modification par lagrenouille (21-12-2016 17:58:11)


Si tu n’aimes pas windows, dégoûtes-en les autres !

Hors ligne

#4 21-12-2016 17:52:51

otyugh
Membre
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016

Re : DD extrne

Tu sembles pas très familier avec tout ça ^^
Pour "fsck" une parititon, il faut d'abord l'identifier (lsblk et blkid sont souvent de chouettes outils pour ce faire) sur quoi est-ce monté ? (on peut identifier le /dev/sdXY, ou par le label ou par le uuid dans "/dev/disk/by-*/*. Ensuite être certain qu'il ne soit pas monté pour pouvoir verifier le formatage s'il y a une erreur lors du démontage (umount) comme quoi c'est occupé, c'est qu'un processus ou un terminal a ouvert le point de montage ; faut donc les fermer et retenter de démonter la partition. Au cas échéant, redémarrer est un moyen d'avoir une garantie qu'il soit pas monté en derniers recours...
Bref et une fois que t'en est là

fsck.ext4 /dev/sdXY

Dernière modification par otyugh (21-12-2016 17:53:47)


Agenda du libre : se faire dépanner/dépanner IRL ! Le libre n'est pas qu'un phénomène internet.
Framapad sur les balados : Emissions audio pro/amateur, votre radio sur-mesure !

Hors ligne

#5 21-12-2016 18:01:04

lagrenouille
Adhérent(e)
Lieu : dark-monde
Distrib. : jessie et stretch
Noyau : Debian -amd64 - noyau.4.9
(G)UI : env i3 - bépo - weechat
Inscription : 28-03-2012
Site Web

Re : DD extrne

c'est sur, j'ai toujours ue de gros problèmes avec les partitions, ça m'échappe '
#

mount /dev/sdb


sdb   sdb1


root@agamemnon:/home/momo#

mount /dev/sdb1


mount: impossible de trouver /dev/sdb1 dans /etc/fstab



je vais essayer de comprendre ce que tu me dis, merci

Edit à toto :
Mis les commandes root en conformité.


Si tu n’aimes pas windows, dégoûtes-en les autres !

Hors ligne

#6 21-12-2016 18:08:14

lagrenouille
Adhérent(e)
Lieu : dark-monde
Distrib. : jessie et stretch
Noyau : Debian -amd64 - noyau.4.9
(G)UI : env i3 - bépo - weechat
Inscription : 28-03-2012
Site Web

Re : DD extrne

et ça fait quoi cette commande en clair

fsck.ext4 /dev/sdXY


Si tu n’aimes pas windows, dégoûtes-en les autres !

Hors ligne

#7 21-12-2016 18:11:19

raleur
Membre
Inscription : 03-10-2014

Re : DD extrne

Puisque la partition à vérifier est sdb1, la commande est

fsck /dev/sdb1



Concernant l'erreur avec mount : quand le montage n'est pas défini dans /etc/fstab, il faut spécifier le périphérique et le point de montage dans la commande.

Hors ligne

#8 21-12-2016 18:13:16

nIQnutn
Modérateur
Lieu : Lyon
Distrib. : Jessie
Noyau : Linux 3.16-amd64
(G)UI : XFCE
Inscription : 16-03-2012
Site Web

Re : DD extrne

lagrenouille a écrit :

et ça fait quoi cette commande en clair

fsck.ext4 /dev/sdXY



et le manuel te répond:

man fsck


NOM
       fsck - Vérifier et réparer un système de fichiers Linux

SYNOPSIS
       fsck  [-lrsAVRTMNP]  [-C  [descripteur]] [-t type] [système_de_fichiers
       ...] [--] [options_spécifiques_sf]

DESCRIPTION
       fsck est utilisé pour vérifier et éventuellement  réparer  un  ou  plu‐
       sieurs systèmes de fichiers Linux. système_de_fichiers peut être un nom
       de périphérique (par exemple /dev/hdc1, /dev/sdb2), un point de montage
       (par  exemple  /,  /usr,  /home),  une étiquette (« label ») ext2 ou un
       identifiant UUID (par exemple UUID=8868abf6-88c5-4a83-98b8-bfc24057f7bd
       ou  LABEL=root). Le programme fsck essayera de fonctionner en parallèle
       pour les systèmes de fichiers situés sur des disques  physiques  diffé‐
       rents afin de minimiser la durée totale de vérification.

       Si  aucun système de fichiers n'est précisé sur la ligne de commande et
       que l'option -A n'est pas indiquée,  fsck  vérifiera  les  systèmes  de
       fichiers  présents  dans  /etc/fstab.  C'est  équivalent à préciser les
       options -As.

       Le code de retour de fsck est la somme des conditions suivantes.

              0      Pas d'erreur.
              1      Erreurs de système de fichiers corrigées.
              2      Le système devrait être redémarré.
              4      Il reste des erreurs non  corrigées  sur  le  système  de
                     fichiers.
              8      Erreur lors de l'opération.
              16     Erreur d'utilisation ou de syntaxe.
              32     Vérification annulée par l'utilisateur.
              128    Erreur de bibliothèque partagée.

       Le  code  de  sortie renvoyé lorsque tous les systèmes de fichiers sont
       vérifiés en utilisant l'option -A est le OU bit à bit des codes de sor‐
       ties de chacun des systèmes de fichiers vérifiés.

       En  réalité  fsck n'est qu'une interface commune à toute une variété de
       vérificateurs de systèmes  de  fichiers  (fsck.type)  disponibles  sous
       Linux.  Le vérificateur spécifique à un système est recherché successi‐
       vement dans /sbin, /etc/fs, /etc et  finalement  dans  les  répertoires
       indiqués  dans la variable d'environnement PATH. Veuillez consulter les
       pages de manuels des vérificateurs spécifiques à un système de fichiers
       pour de plus amples précisions.
 

Hors ligne

#9 21-12-2016 18:13:38

raleur
Membre
Inscription : 03-10-2014

Re : DD extrne

fsck sert à vérifier et réparer un système de fichiers.
Pour savoir à quoi sert une commande, tu peux consulter sa page de manuel :

man fsck

Hors ligne

#10 21-12-2016 18:17:18

lagrenouille
Adhérent(e)
Lieu : dark-monde
Distrib. : jessie et stretch
Noyau : Debian -amd64 - noyau.4.9
(G)UI : env i3 - bépo - weechat
Inscription : 28-03-2012
Site Web

Re : DD extrne

home/momo#

fsck.ext4 /dev/sdb1


e2fsck 1.43.3 (04-Sep-2016)
/dev/sdb1 : récupération du journal
JBD2: Invalid checksum recovering block 21 in log
JBD2: Invalid checksum recovering block 176 in log
JBD2: Invalid checksum recovering block 176 in log
Erreur de somme de contrôle de journal trouvée dans /dev/sdb1
/dev/sdb1 n'a pas été démonté proprement, vérification forcée.
Passe 1 : vérification des i-noeuds, des blocs et des tailles
Passe 2 : vérification de la structure des répertoires
Passe 3 : vérification de la connectivité des répertoires
Passe 4 : vérification des compteurs de référence
Passe 5 : vérification de l'information du sommaire de groupe
Le décompte des blocs libres est erroné (480431166, décompté=401544335).
Corriger<o>? oui
Le décompte des i-noeuds libres est erroné (122101749, décompté=121783942).
Corriger<o>? oui

/dev/sdb1: ***** LE SYSTÈME DE FICHIERS A ÉTÉ MODIFIÉ *****
/dev/sdb1 : 317818/122101760 fichiers (1.1% non contigus), 86834054/488378389 blocs



Edit à toto :
Mis les commandes root en conformité.


Si tu n’aimes pas windows, dégoûtes-en les autres !

Hors ligne

#11 21-12-2016 18:21:20

lagrenouille
Adhérent(e)
Lieu : dark-monde
Distrib. : jessie et stretch
Noyau : Debian -amd64 - noyau.4.9
(G)UI : env i3 - bépo - weechat
Inscription : 28-03-2012
Site Web

Re : DD extrne

OK 
merci
je l'avais pas démonter, donc je vois pas pourquoi il me fait ça

je vais le démonter maintenant , avant de fermer l'ordi
merci à vous

Si tu n’aimes pas windows, dégoûtes-en les autres !

Hors ligne

#12 21-12-2016 18:26:36

raleur
Membre
Inscription : 03-10-2014

Re : DD extrne

lagrenouille a écrit :

je l'avais pas démonter, donc je vois pas pourquoi il me fait ça


Précisément parce que n'avais pas démonté proprement la clé avant de la retirer.

Hors ligne

#13 21-12-2016 18:56:44

otyugh
Membre
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016

Re : DD extrne

lagrenouille a écrit :

je vais le démonter maintenant , avant de fermer l'ordi


Quand tu éteins l'ordi, tout est démonté automatiquement normalement... Donc ça ne devrait pas être nécessaire.


Agenda du libre : se faire dépanner/dépanner IRL ! Le libre n'est pas qu'un phénomène internet.
Framapad sur les balados : Emissions audio pro/amateur, votre radio sur-mesure !

Hors ligne

Pied de page des forums