Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 05-02-2017 13:45:47

Sora Okinawa
Membre
Inscription : 05-02-2017

Installation de debian 8 sans internet

Bonjour !

Tout d'abord je suis nouveau ici, et merci d'avance à ceux qui prendront le temps de m'aider.

Je suis en étude d'informatique, et mon établissement ne possède que des machines tournant sous debian 8. J'ai donc décidé d'installer ce système d'exploitation sur ma machine personnelle, une MSI GP72 6QE (PC portable donc) fraiche de Novembre dernier. La carte ethernet est une Killer E2400.

Par conséquent, elle n'est pas détectée par l'installateur Debian, car trop récente d'après mes quelques recherches internet. Je me suis donc résolu à télécharger les 8 images CD complet de Debian manuellement via torrent étant donné que je n'ai pas accès a internet sur Debian. J'ai donc téléchargé les 8 images CD de debian 8.7.1 en amd64 sur une autre machine.

Ensuite, j'ai installer la première image CD (la numéro 1) sans connexion internet sur mon PC portable. J'ai donc accès à debian en ligne de commande, mais ma maigre connaissance en bash shell ne m'aide pas beaucoup. J'aurais donc besoin d'aide pour pouvoir installer les 7 autres images CD. Je précise que mon GRUB marche parfaitement et que j'ai gardé windows 7 à côté.

Si Jamais, voici quelques informations de mon PC portable :

Modèle MSI GP72 6QE
Carte graphique Nvidia GTX 950M
LAN Killer E2400 de chez Qualcom/atheros si je ne me trompe pas
processeur intel core i5

Merci à ceux qui prendront le temps de me répondre big_smile

Cordialement,

Sora

Hors ligne

#2 05-02-2017 14:04:19

nIQnutn
Modeb
Distrib. : Stretch
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 16-03-2012

Re : Installation de debian 8 sans internet

il me semble que c'est avec ce carte qu'on s'est cassé les dents dessus avec plusieurs amis.
Une solution serait d'utiliser temporairement une clé wifi reconnu nativement par Debian.

Hors ligne

#3 05-02-2017 14:16:16

raleur
Membre
Inscription : 03-10-2014

Re : Installation de debian 8 sans internet

Tu aurais dû utiliser l'image de DVD n° 1 au lieu de gaspiller de la bande passante à télécharger 8 images de CD qui sont loin d'être la distribution complète : elle compte 82 CD ou 13 DVD, mais seules les images des quelques premiers CD et DVD sont disponibles en téléchargement direct pour des questions de ressources. Les autres doivent être reconstruites avec jigdo.

Bref, le DVD n° 1 est suffisant pour installer un système avec environnement de bureau relativement complet, ce qui n'est plus le cas de la plupart des CD n° 1 pour cause d'espace devenu insuffisant.

Ceci dit, de nos jours, tu risques de ne pas aller bien loin sans réseau.

Dernière modification par raleur (05-02-2017 14:19:40)

Hors ligne

#4 05-02-2017 15:02:33

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Merci de vos réponses big_smile

nIQnutn > Quand on parle de clé Wi-fi, c'est d'un réseau wi-fi fonctionnel ou de ces clés USB proposant un réseau limité vendues par les Fournisseurs d'accès internet ?

raleur > Je vais essayer de désinstaller ma version actuelle avec le tuto du site et je vais réinstaller Debian avec le DvD 1 comme tu me l'a expliqué.
D'accord, je vois, merci des précisions. Effectivement, ça fait beaucoup lol

J'essaye ça et je vous tient au courant !

Dernière modification par Sora Okinawa (05-02-2017 15:03:56)

Hors ligne

#5 05-02-2017 18:09:34

raleur
Membre
Inscription : 03-10-2014

Re : Installation de debian 8 sans internet

Clé wifi ou adaptateur USB-ethernet selon le type de réseau disponible.

Pas besoin de désinstaller, il suffit d'installer par dessus en reformatant les partitions.

Hors ligne

#6 05-02-2017 18:42:24

remy.labene
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Bonjour,
Je viens d'installer debian 9 sur un MSI GP72 6QE + disque SSD M2 rajouté, pas simple, mais un avion de chasse à la sortie ! J'avais de nombreux freeze mais je ne savais pas trop d'où cela venait, en fait le responsable c'est la gestion ACPI qui bugge. Il faut rajouter acpi=off au démarrage de grub (appuyer sur e, rajouter acpi=off sur la ligne linux /vmlinuz-4.x , crtl x pour lancer). Je l'ai modifié ensuite définitivement dans /etc/default/grub.

Globalement et rapidement j'ai procédé ainsi :

Boot initial à partir du CD netinstall de debian testing (stretch ou 9) -> installation en mode expert pour les 3 partitions /boot->ext2   / et  /home -> ext4
Sélectionner les paquets propriétaires pour avoir les drivers et firmware constructeurs (intel, nvidia, atheros ...)

Premier redémarrage, installer les firmware manquants : firmware-linux, firmware-iwlwifi, firmware-intel-sound, firmware-linux-nonfree, firmware-linux-misc-nonfree ...

le wifi fonctionne maintenant.

Complément d'info qui peuvent servir si on veut utiliser la 3D et profiter des drivers nvidia propriétaires :

En tant que root, blacklister le pilote "nouveau", attention c'est délicat en cas de mauvaise manip, il faut rajouter un fichier dans /etc/modprobe.d/nouveau.conf.
Ce fichier doit contenir les lignes suivantes :

#etc/modprobe.d/nouveau.conf.
blacklist nouveau
blacklist lbm-nouveau
options nouveau modeset=0
alias nouveau off
alias lbm-nouveau off



exécuter ensuite "

depmod -ae


" et "

update-initramfs -u


"

redémarrer à ce stade c'est préférable pour la suite.

Installer bumblebee-nvidia, le plus simple est de faire en ligne de commande en tant que root bien-sur : "

apt-get install dkms build-essential bumblebee-nvidia


" les dépendances seront gérées automatiquement. Une fois installé rebooter

Pour rappel ce pilote permet de gérer les 2 cartes graphiques : intel pour le bureau et Nvidia GTX950M pour la 3D.

Désolé pour mon post un peu long et partiellement hors sujet !

Edit à toto :
Mis les commandes etconfiguration sous balises du forum.

Hors ligne

#7 05-02-2017 18:59:50

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 9 (stretch) 64 bits + backports
Noyau : 4.9.65-3+deb9u2
(G)UI : gnome
Inscription : 21-10-2008

Re : Installation de debian 8 sans internet

Supprimer l'ACPI est dans le tuto  de configuration des modules :
https://debian-facile.org/doc:systeme:n … mer-l-acpi

"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#8 05-02-2017 23:05:52

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Re !

Après avoir un peu bataillé pour désinstaller Debian ce qui, au final, a été fait, j'ai fini par le réinstaller avec l'image DvD 1 dont tu m'avait parlé Raleur.
Et la, j'arrive, je vois que j'aurais pu ne pas m'embêter. Okééééé, tant pis xD

Ensuite, effectivement j'ai l'impression que les connexions wi-fi ne fonctionnent pas. Ce n'est pas vraiment qu'une impression puisque après être passé dans l'applet réseau (j'ai Cinnamon comme GUI si vous vous demandez), j'ai configuré manuellement une connexion wi-fi après m'être étonné de ne pas voir de scan des réseaux alentours. Après réflexion, ca m'a paru effectivement logique vu que ma Killer E2400 n'est pas reconnue.

Pour finir, j'ai un peu de mal à comprendre à quoi cela me servirais de désactiver l'ACPI. En premier je ne sais pas ce que c'est, ensuite tu as parlé de l'ACPI pour debian 9. J'ai installé debian 8, donc est-ce que cela reviens aux mêmes manipulations ? Est-ce que cela peut régler mon problème ?

By the way, je prends note de ton explication sur les drivers nvidia remy big_smile

Cordialement,

Sora.

Dernière modification par Sora Okinawa (05-02-2017 23:06:25)

Hors ligne

#9 05-02-2017 23:19:32

raleur
Membre
Inscription : 03-10-2014

Re : Installation de debian 8 sans internet

Sora Okinawa a écrit :

j'ai l'impression que les connexions wi-fi ne fonctionnent pas. (...) ca m'a paru effectivement logique vu que ma Killer E2400 n'est pas reconnue.


Non, le Killer E2400 est un contrôleur ethernet. Aucun rapport avec le wifi.
Si l'applet réseau (NetworkManager ?) permet de configurer du wifi, c'est forcément qu'un contrôleur wifi est détecté et pris en charge. Tu peux l'identifier avec "lspci -nn" si c'est un composant PCI.

Si le système n'a pas de problème de stabilité, l'ACPI ne te concerne pas.

Hors ligne

#10 06-02-2017 01:02:46

remy.labene
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

@ sora

J'ai installé Debian 9 (qui sera la prochaine version stable dans quelques mois) pour tester et pour avoir les drivers nvidia récents.

Pour faire fonctionner la carte wifi il faut installer le firmware  firmware-iwlwifi, je ne sais pas s'il est assez récent sur Debian 8, à tester. Si ça ne fonctionne pas c'est qu'il est trop vieux.

l'ACPI, c'est la gestion de l'énergie très utilisé sur les portables mais souvent buggé car les fabricants ne respectent pas les spécifications. Il semble que le MSI GP72 n'échappe pas à la règle, d'où l'option acpi=off pour le désactiver, mais du coup le touchpad ne fonctionne pas (j'ai pas compris pourquoi !) et la gestion d'énergie de la batterie n'est pas géré. l'option "nolapic" rend le système ACPI fonctionnel mais la 3D rame bizarrement. Voir ici pour les options ACPI : https://01.org/linux-acpi/documentation … cpi-issues

Hors ligne

#11 06-02-2017 03:58:58

MicP
Membre
Inscription : 29-02-2016

Re : Installation de debian 8 sans internet

Ou alors, tu connecte ton smartphone sur un port USB de la machine, et dès que ta machine a démarré, tu va sur ton smartphone pour
"partager par USB" la connexion internet de ton smartphone (que ce soit WiFi, 3G, 4G ou autre pourvu qu'il soit lui même connecté au net)

Quand le programme d'installation recherchera les périphériques d'accès à l'internet, il trouvera tout seul (et te proposera par défaut) la connexion par USB de ton smartphone.

Dernière modification par MicP (06-02-2017 22:48:06)

Hors ligne

#12 06-02-2017 12:21:01

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

J'ai ce matin même essayé d'installer le firmware-iwlwifi avec apt-get install firmware-iwlwifi, mais ça ne fonctionne pas. Apparemment le paquet est introuvable. J'ai utilisé une connexion par modem USB comme me l'a suggéré MicP, merci au passage smile

Peut-on donc m'aider à installer ce paquet ?

Sora smile

Hors ligne

#13 06-02-2017 12:26:51

robert2a
Membre
Lieu : France
Inscription : 15-11-2014

Re : Installation de debian 8 sans internet

Bonjour
il est dans les dépots non-free  => https://packages.debian.org/fr/jessie/firmware-iwlwifi
nota: sinon plus récent dans les backports de jessie

Hors ligne

#14 06-02-2017 12:45:17

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

D'accord, mais comment je l'installe en définitive ? J'ai un peu de mal à comprendre ce site, a quoi correspondent les liens contenus dans "liste des fichiers" ?

Hors ligne

#15 06-02-2017 13:13:58

remy.labene
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Il faut vérifier que ton fichier /etc/apt/sources.list est les lignes suivantes :

# jessie-updates, previously known as 'volatile'
deb http://debian.proxad.net/debian/ jessie-updates main contrib non-free
deb-src http://debian.proxad.net/debian/ jessie-updates main contrib non-free

# jessie-backports, previously on backports.debian.org
deb http://debian.proxad.net/debian/ jessie-backports main contrib non-free
deb-src http://debian.proxad.net/debian/ jessie-backports main contrib non-free


Après ça tu fais un "

apt-get update


" si tu as une connexion réseau quelconque.

puis : 

apt-get install firmware-iwlwifi



Edit à toto :
Modifier les lignes sources et commandes root avec les balises qu'y faut du forum.

Hors ligne

#16 06-02-2017 15:07:10

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

J'ai rajouté les lignes dans le fichier sources.list, j'ai ensuite fait l'update qui a pris un certain temps puis j'ai installé firmware-iwlwifi. L'installation s'est bien déroulée, cependant je n'ai toujours aucun scan des réseaux à proximité, donc je suppose que le wi-fi ne fonctionne pas. J'ai redémarré mon PC, mais toujours rien.

C'est moi qui sait rien faire, ou c'est vraiment un problème machine / OS ?

Hors ligne

#17 06-02-2017 15:39:19

remy.labene
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Que dit la commande

dmesg


?

Hors ligne

#18 06-02-2017 16:16:12

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Le message qui en résulte est ultra long. SI jamais je doit le poster d'une façon différente, dites le moi et je changerais.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.39-1 (2016-12-30)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=b5bc2bee-f843-486e-9062-ae7d8fe1d01f ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006af7efff] usable
[    0.000000] BIOS-e820: [mem 0x000000006af7f000-0x000000006af7ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006af80000-0x000000006afa9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006afaa000-0x000000006b000fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006b001000-0x000000006b511fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006b512000-0x000000006e90ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006e910000-0x000000006f36cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006f36d000-0x000000006f3a9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006f3aa000-0x000000006fb85fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006fb86000-0x000000006ff81fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006ff82000-0x000000006fffefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002823fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x6f379000  ACPI 2.0=0x6f379000  SMBIOS=0xf05e0  MPS=0xfc9b0
[    0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x0000000000057000) (0MB)
[    0.000000] efi: mem02: type=3, attr=0xf, range=[0x0000000000057000-0x0000000000058000) (0MB)
[    0.000000] efi: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[    0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
[    0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
[    0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000060000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001019000) (15MB)
[    0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001019000-0x0000000001200000) (1MB)
[    0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002119000) (15MB)
[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002119000-0x0000000030ca4000) (747MB)
[    0.000000] efi: mem11: type=2, attr=0xf, range=[0x0000000030ca4000-0x000000004b52a000) (424MB)
[    0.000000] efi: mem12: type=4, attr=0xf, range=[0x000000004b52a000-0x000000004b56a000) (0MB)
[    0.000000] efi: mem13: type=7, attr=0xf, range=[0x000000004b56a000-0x000000006a0b7000) (491MB)
[    0.000000] efi: mem14: type=1, attr=0xf, range=[0x000000006a0b7000-0x000000006a0d5000) (0MB)
[    0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000006a0d5000-0x000000006af7f000) (14MB)
[    0.000000] efi: mem16: type=10, attr=0xf, range=[0x000000006af7f000-0x000000006af80000) (0MB)
[    0.000000] efi: mem17: type=6, attr=0x800000000000000f, range=[0x000000006af80000-0x000000006afaa000) (0MB)
[    0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000006afaa000-0x000000006b001000) (0MB)
[    0.000000] efi: mem19: type=6, attr=0x800000000000000f, range=[0x000000006b001000-0x000000006b512000) (5MB)
[    0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000006b512000-0x000000006b51a000) (0MB)
[    0.000000] efi: mem21: type=7, attr=0xf, range=[0x000000006b51a000-0x000000006c4da000) (15MB)
[    0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000006c4da000-0x000000006e310000) (30MB)
[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000006e310000-0x000000006e5a1000) (2MB)
[    0.000000] efi: mem24: type=2, attr=0xf, range=[0x000000006e5a1000-0x000000006e5ab000) (0MB)
[    0.000000] efi: mem25: type=3, attr=0xf, range=[0x000000006e5ab000-0x000000006e910000) (3MB)
[    0.000000] efi: mem26: type=0, attr=0xf, range=[0x000000006e910000-0x000000006f36d000) (10MB)
[    0.000000] efi: mem27: type=9, attr=0xf, range=[0x000000006f36d000-0x000000006f3aa000) (0MB)
[    0.000000] efi: mem28: type=10, attr=0xf, range=[0x000000006f3aa000-0x000000006fb86000) (7MB)
[    0.000000] efi: mem29: type=6, attr=0x800000000000000f, range=[0x000000006fb86000-0x000000006ff82000) (3MB)
[    0.000000] efi: mem30: type=5, attr=0x800000000000000f, range=[0x000000006ff82000-0x000000006ffff000) (0MB)
[    0.000000] efi: mem31: type=4, attr=0xf, range=[0x000000006ffff000-0x0000000070000000) (0MB)
[    0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000100000000-0x0000000282400000) (6180MB)
[    0.000000] efi: mem33: type=0, attr=0x0, range=[0x0000000070000000-0x0000000078000000) (128MB)
[    0.000000] efi: mem34: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem35: type=11, attr=0x8000000000000001, range=[0x00000000fe000000-0x00000000fe011000) (0MB)
[    0.000000] efi: mem36: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem37: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem38: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. GP72 6QE/MS-1795, BIOS E1795IMS.114 04/29/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x282400 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 0079000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0078800000 mask 7FFF800000 uncachable
[    0.000000]   5 base 0078400000 mask 7FFFC00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x70000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcc10-0x000fcc1f] mapped at [ffff8800000fcc10]
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01cf5000, 0x01cf5fff] PGTABLE
[    0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE
[    0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x282200000-0x2823fffff]
[    0.000000]  [mem 0x282200000-0x2823fffff] page 2M
[    0.000000] BRK [0x01cf8000, 0x01cf8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x280000000-0x2821fffff]
[    0.000000]  [mem 0x280000000-0x2821fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x27fffffff]
[    0.000000]  [mem 0x200000000-0x27fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0x6af7efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x6adfffff] page 2M
[    0.000000]  [mem 0x6ae00000-0x6af7efff] page 4k
[    0.000000] init_memory_mapping: [mem 0x6afaa000-0x6b000fff]
[    0.000000]  [mem 0x6afaa000-0x6b000fff] page 4k
[    0.000000] BRK [0x01cf9000, 0x01cf9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x6b512000-0x6e90ffff]
[    0.000000]  [mem 0x6b512000-0x6b5fffff] page 4k
[    0.000000]  [mem 0x6b600000-0x6e7fffff] page 2M
[    0.000000]  [mem 0x6e800000-0x6e90ffff] page 4k
[    0.000000] BRK [0x01cfa000, 0x01cfafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x6ffff000-0x6fffffff]
[    0.000000]  [mem 0x6ffff000-0x6fffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x36356000-0x371a2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000006F379000 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x000000006F3790B0 0000DC (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000006F39D078 00010C (v05 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000006F379218 023E5A (v02 MSI_NB MEGABOOK 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000006FB85F80 000040
[    0.000000] ACPI: APIC 0x000000006F39D188 000084 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000006F39D210 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000006F39D258 00009C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x000000006F39D2F8 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
[    0.000000] ACPI: MCFG 0x000000006F39D3C0 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000006F39D400 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x000000006F39D438 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: LPIT 0x000000006F39D750 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000006F39D7E8 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000006F39DA30 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000006F3A05E0 000CF3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x000000006F3A12D8 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000006F3A1310 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000006F3A1368 00061A (v02 AMI    xh_rvp11 00000000 INTL 20120913)
[    0.000000] ACPI: MSDM 0x000000006F3A1988 000055 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000006F3A19E0 005552 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x000000006F3A6F38 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000006F3A6F80 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: BGRT 0x000000006F3A7DD8 000038 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000006F3A7E10 00009F (v02 SgRef  SgPeg    00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000006F3A7EB0 0013D0 (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: ASF! 0x000000006F3A9280 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000002823fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x2823fffff]
[    0.000000]   NODE_DATA [mem 0x2823f7000-0x2823fbfff]
[    0.000000]  [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff880279c00000-ffff880280bfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x2823fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
[    0.000000]   node   0: [mem 0x00059000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x6af7efff]
[    0.000000]   node   0: [mem 0x6afaa000-0x6b000fff]
[    0.000000]   node   0: [mem 0x6b512000-0x6e90ffff]
[    0.000000]   node   0: [mem 0x6ffff000-0x6fffffff]
[    0.000000]   node   0: [mem 0x100000000-0x2823fffff]
[    0.000000] On node 0 totalpages: 2033523
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 29 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6118 pages used for memmap
[    0.000000]   DMA32 zone: 447445 pages, LIFO batch:31
[    0.000000]   Normal zone: 21630 pages used for memmap
[    0.000000]   Normal zone: 1582080 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 136
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6af7f000-0x6af7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6af80000-0x6afa9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6b001000-0x6b511fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6e910000-0x6f36cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f36d000-0x6f3a9fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f3aa000-0x6fb85fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6fb86000-0x6ff81fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6ff82000-0x6fffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x70000000-0x77ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x78000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880282000000 s80960 r8192 d21440 u524288
[    0.000000] pcpu-alloc: s80960 r8192 d21440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2005690
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=b5bc2bee-f843-486e-9062-ae7d8fe1d01f ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x1f, cntxt size 0x440
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7876560K/8134092K available (5247K kernel code, 947K rwdata, 1832K rodata, 1208K init, 840K bss, 257532K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using HPET reference calibration
[    0.000000] tsc: Detected 2302.977 MHz processor
[    0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4605.95 BogoMIPS (lpj=9211908)
[    0.000025] pid_max: default: 32768 minimum: 301
[    0.000031] ACPI: Core revision 20140424
[    0.022095] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20140424/dswload-210)
[    0.022099] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20140424/psobject-224)
[    0.030855] ACPI: All ACPI Tables successfully acquired
[    0.031671] Security Framework initialized
[    0.031677] AppArmor: AppArmor disabled by boot time parameter
[    0.031678] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.032076] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033673] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.034355] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034362] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034572] Initializing cgroup subsys memory
[    0.034575] Initializing cgroup subsys devices
[    0.034580] Initializing cgroup subsys freezer
[    0.034582] Initializing cgroup subsys net_cls
[    0.034585] Initializing cgroup subsys blkio
[    0.034588] Initializing cgroup subsys perf_event
[    0.034589] Initializing cgroup subsys net_prio
[    0.034610] CPU: Physical Processor ID: 0
[    0.034610] CPU: Processor Core ID: 0
[    0.034613] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.035555] mce: CPU supports 10 MCE banks
[    0.035569] CPU0: Thermal monitoring enabled (TM1)
[    0.035577] process: using mwait in idle threads
[    0.035580] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
tlb_flushall_shift: 6
[    0.035877] Freeing SMP alternatives memory: 20K (ffffffff81a1c000 - ffffffff81a21000)
[    0.039338] ftrace: allocating 21701 entries in 85 pages
[    0.050608] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.090324] smpboot: CPU0: Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz (fam: 06, model: 5e, stepping: 03)
[    0.090331] TSC deadline timer enabled
[    0.090349] Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[    0.090352] ... version:                4
[    0.090353] ... bit width:              48
[    0.090354] ... generic registers:      8
[    0.090354] ... value mask:             0000ffffffffffff
[    0.090355] ... max period:             0000ffffffffffff
[    0.090356] ... fixed-purpose events:   3
[    0.090356] ... event mask:             00000007000000ff
[    0.091448] x86: Booting SMP configuration:
[    0.091449] .... node  #0, CPUs:      #1
[    0.105628] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.105716]  #2 #3
[    0.134103] x86: Booted up 1 node, 4 CPUs
[    0.134106] smpboot: Total of 4 processors activated (18423.81 BogoMIPS)
[    0.137110] devtmpfs: initialized
[    0.139182] PM: Registering ACPI NVS region [mem 0x6af7f000-0x6af7ffff] (4096 bytes)
[    0.139183] PM: Registering ACPI NVS region [mem 0x6f3aa000-0x6fb85fff] (8241152 bytes)
[    0.139892] pinctrl core: initialized pinctrl subsystem
[    0.139973] NET: Registered protocol family 16
[    0.140075] cpuidle: using governor ladder
[    0.140078] cpuidle: using governor menu
[    0.140111] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.140112] ACPI: bus type PCI registered
[    0.140113] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140179] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.140180] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.140381] PCI: Using configuration type 1 for base access
[    0.149338] ACPI: Added _OSI(Module Device)
[    0.149340] ACPI: Added _OSI(Processor Device)
[    0.149341] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.149342] ACPI: Added _OSI(Processor Aggregator Device)
[    0.152611] ACPI : EC: EC description table is found, configuring boot EC
[    0.152825] ACPI : EC: ASUSTek keeps feeding us with broken ECDT tables, which are very hard to workaround. Trying to use DSDT EC info instead. Please send output of acpidump to linux-acpi@vger.kernel.org
[    0.164046] ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.164050] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88028147a400), AE_NOT_FOUND (20140424/psparse-536)
[    0.164055] ACPI : EC: Fail in evaluating the _REG object of EC device. Broken bios is suspected.
[    0.170343] ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
[    0.170345] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88028147a400), AE_NOT_FOUND (20140424/psparse-536)
[    0.181104] ACPI: Executed 24 blocks of module-level executable AML code
[    0.210129] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.237936] ACPI: Dynamic OEM Table Load:
[    0.237943] ACPI: SSDT 0xFFFF880279222800 0003CF (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.238861] ACPI: Dynamic OEM Table Load:
[    0.238866] ACPI: SSDT 0xFFFF88027921A000 000587 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.253926] ACPI: Dynamic OEM Table Load:
[    0.253932] ACPI: SSDT 0xFFFF880279076000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.266434] ACPI: Dynamic OEM Table Load:
[    0.266439] ACPI: SSDT 0xFFFF880281483E00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.279714] ACPI: Interpreter enabled
[    0.279723] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.279731] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.279748] ACPI: (supports S0 S3 S4 S5)
[    0.279749] ACPI: Using IOAPIC for interrupt routing
[    0.279782] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.281615] ACPI: Power Resource [PG00] (on)
[    0.290713] ACPI: Power Resource [PG01] (on)
[    0.291045] ACPI: Power Resource [PG02] (on)
[    0.302764] ACPI: Power Resource [WRST] (off)
[    0.303021] ACPI: Power Resource [WRST] (off)
[    0.303278] ACPI: Power Resource [WRST] (off)
[    0.303532] ACPI: Power Resource [WRST] (off)
[    0.303786] ACPI: Power Resource [WRST] (off)
[    0.304041] ACPI: Power Resource [WRST] (off)
[    0.304297] ACPI: Power Resource [WRST] (off)
[    0.304552] ACPI: Power Resource [WRST] (off)
[    0.304808] ACPI: Power Resource [WRST] (off)
[    0.305064] ACPI: Power Resource [WRST] (off)
[    0.305319] ACPI: Power Resource [WRST] (off)
[    0.305576] ACPI: Power Resource [WRST] (off)
[    0.305830] ACPI: Power Resource [WRST] (off)
[    0.306088] ACPI: Power Resource [WRST] (off)
[    0.306343] ACPI: Power Resource [WRST] (off)
[    0.306600] ACPI: Power Resource [WRST] (off)
[    0.306852] ACPI: Power Resource [WRST] (off)
[    0.307107] ACPI: Power Resource [WRST] (off)
[    0.307361] ACPI: Power Resource [WRST] (off)
[    0.307615] ACPI: Power Resource [WRST] (off)
[    0.313257] ACPI: Power Resource [FN00] (off)
[    0.313316] ACPI: Power Resource [FN01] (off)
[    0.313376] ACPI: Power Resource [FN02] (off)
[    0.313434] ACPI: Power Resource [FN03] (off)
[    0.313491] ACPI: Power Resource [FN04] (off)
[    0.314433] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.314438] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.315678] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.316423] PCI host bridge to bus 0000:00
[    0.316425] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.316427] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.316428] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.316429] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.316430] pci_bus 0000:00: root bus resource [mem 0x7cc00000-0xdfffffff]
[    0.316431] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff]
[    0.316432] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
[    0.316438] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.316655] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.316685] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.316744] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.316800] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.316807] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.316812] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.316815] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.316965] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.316983] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[    0.317040] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.317100] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.317134] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.317150] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[    0.317294] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.317314] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[    0.317377] pci 0000:00:16.0: PME# supported from D3hot
[    0.317480] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.317494] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[    0.317500] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[    0.317506] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.317512] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.317519] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.317525] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[    0.317558] pci 0000:00:17.0: PME# supported from D3hot
[    0.317645] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.317696] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.317750] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.317783] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.317834] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.317888] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.317935] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[    0.318096] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.318104] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[    0.318211] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.318231] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[    0.318253] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[    0.318296] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.318356] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.318391] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.318438] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[    0.318507] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.318703] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[    0.318720] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.318736] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.318752] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.318763] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.318774] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.318851] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.325946] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.325948] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.325951] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.325954] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.326056] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[    0.326088] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[    0.326244] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.326290] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.333961] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.333965] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.334057] pci 0000:03:00.0: [1969:e0a1] type 00 class 0x020000
[    0.334080] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit]
[    0.334091] pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.334195] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.334225] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.341959] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.341976] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.341979] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.341998] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.349117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.349166] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.349211] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.349257] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.349302] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.349346] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.349391] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.349435] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.349860] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.349951] ACPI : EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
[    0.350034] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.350035] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.350038] vgaarb: loaded
[    0.350039] vgaarb: bridge control possible 0000:00:02.0
[    0.350127] PCI: Using ACPI for IRQ routing
[    0.378204] PCI: pci_cache_line_size set to 64 bytes
[    0.378250] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.378252] e820: reserve RAM buffer [mem 0x6af7f000-0x6bffffff]
[    0.378253] e820: reserve RAM buffer [mem 0x6b001000-0x6bffffff]
[    0.378253] e820: reserve RAM buffer [mem 0x6e910000-0x6fffffff]
[    0.378255] e820: reserve RAM buffer [mem 0x282400000-0x283ffffff]
[    0.378380] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.378383] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.380418] amd_nb: Cannot enumerate AMD northbridges
[    0.380429] Switched to clocksource hpet
[    0.384244] pnp: PnP ACPI init
[    0.384252] ACPI: bus type PNP registered
[    0.384329] pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
[    0.384362] pnp 00:01: Plug and Play ACPI device, IDs SYN1507 SYN1500 SYN0002 PNP0f13 (active)
[    0.384473] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.384475] system 00:02: [io  0xffff] has been reserved
[    0.384476] system 00:02: [io  0xffff] has been reserved
[    0.384477] system 00:02: [io  0xffff] has been reserved
[    0.384478] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.384480] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.384482] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.384541] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.384542] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.384564] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.384593] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.384594] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.390317] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.390319] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.390320] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.390321] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.390323] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.390324] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.390325] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.390326] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.390328] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.390329] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.390330] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.390365] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.390367] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.390368] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.390369] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.390370] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.390371] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.390373] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.390374] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.390562] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.390563] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.391297] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.391299] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.391300] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.391301] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.391857] pnp: PnP ACPI: found 10 devices
[    0.391857] ACPI: bus type PNP unregistered
[    0.400757] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.400759] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.400762] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.400764] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.400766] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.400769] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.400774] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.400775] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.400778] pci 0000:00:1c.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.400783] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.400785] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.400786] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.400787] pci_bus 0000:00: resource 7 [mem 0x7cc00000-0xdfffffff]
[    0.400788] pci_bus 0000:00: resource 8 [mem 0xfc000000-0xfc00ffff]
[    0.400789] pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff]
[    0.400790] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.400791] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.400792] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.400793] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.400794] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.400795] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.400974] NET: Registered protocol family 2
[    0.401414] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.401538] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.401713] TCP: Hash tables configured (established 65536 bind 65536)
[    0.401726] TCP: reno registered
[    0.401735] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.401760] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.401872] NET: Registered protocol family 1
[    0.401884] pci 0000:00:02.0: Video device with shadowed ROM
[    0.402102] PCI: CLS 0 bytes, default 64
[    0.402132] Unpacking initramfs...
[    0.618070] Freeing initrd memory: 14644K (ffff880036356000 - ffff8800371a3000)
[    0.618087] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.618089] software IO TLB [mem 0x660d5000-0x6a0d5000] (64MB) mapped at [ffff8800660d5000-ffff88006a0d4fff]
[    0.618353] microcode: CPU0 sig=0x506e3, pf=0x20, revision=0x84
[    0.618370] microcode: CPU1 sig=0x506e3, pf=0x20, revision=0x84
[    0.618378] microcode: CPU2 sig=0x506e3, pf=0x20, revision=0x84
[    0.618388] microcode: CPU3 sig=0x506e3, pf=0x20, revision=0x84
[    0.618482] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.618743] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.618782] audit: initializing netlink subsys (disabled)
[    0.618794] audit: type=2000 audit(1486388898.632:1): initialized
[    0.619268] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.619284] zbud: loaded
[    0.619750] VFS: Disk quotas dquot_6.5.2
[    0.619780] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.619844] msgmni has been set to 15510
[    0.620513] alg: No test for stdrng (krng)
[    0.620587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.620795] io scheduler noop registered
[    0.620797] io scheduler deadline registered
[    0.620884] io scheduler cfq registered (default)
[    0.621090] pcieport 0000:00:01.0: irq 136 for MSI/MSI-X
[    0.621217] pcieport 0000:00:1c.0: irq 137 for MSI/MSI-X
[    0.621343] pcieport 0000:00:1c.3: irq 138 for MSI/MSI-X
[    0.621416] aer 0000:00:1c.0:pcie02: service driver aer loaded
[    0.621434] aer 0000:00:1c.3:pcie02: service driver aer loaded
[    0.621448] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.621449] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.621450] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.621456] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.621457] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.621459] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.621466] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.621467] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.621469] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.621481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.621493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.621509] efifb: probing for efifb
[    0.621524] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010f00000, using 8128k, total 8128k
[    0.621525] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.621526] efifb: scrolling: redraw
[    0.621527] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.624976] Console: switching to colour frame buffer device 240x67
[    0.628242] fb0: EFI VGA frame buffer device
[    0.628249] intel_idle: does not run on family 6 model 94
[    0.628285] GHES: HEST is not enabled!
[    0.628384] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.629050] Linux agpgart interface v0.103
[    0.629133] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.633239] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.633242] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.633402] mousedev: PS/2 mouse device common for all mice
[    0.633492] rtc_cmos 00:04: RTC can wake from S4
[    0.633858] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.633948] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.633959] ledtrig-cpu: registered to indicate activity on CPUs
[    0.634485] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.634486] AMD IOMMUv2 functionality not available on this system
[    0.634546] TCP: cubic registered
[    0.634739] NET: Registered protocol family 10
[    0.634986] mip6: Mobile IPv6
[    0.634989] NET: Registered protocol family 17
[    0.634995] mpls_gso: MPLS GSO support
[    0.635470] registered taskstats version 1
[    0.636632] rtc_cmos 00:04: setting system clock to 2017-02-06 13:48:19 UTC (1486388899)
[    0.636704] PM: Hibernation image not present or could not be loaded.
[    0.637389] Freeing unused kernel memory: 1208K (ffffffff818ee000 - ffffffff81a1c000)
[    0.637390] Write protecting the kernel read-only data: 8192k
[    0.637748] Freeing unused kernel memory: 884K (ffff880001723000 - ffff880001800000)
[    0.638093] Freeing unused kernel memory: 216K (ffff8800019ca000 - ffff880001a00000)
[    0.645340] systemd-udevd[72]: starting version 215
[    0.645522] random: systemd-udevd: uninitialized urandom read (16 bytes read, 100 bits of entropy available)
[    0.645752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.649620] random: nonblocking pool is initialized
[    0.653460] hidraw: raw HID events driver (C) Jiri Kosina
[    0.666308] ACPI: Fan [FAN0] (off)
[    0.666336] ACPI: Fan [FAN1] (off)
[    0.666359] ACPI: Fan [FAN2] (off)
[    0.666378] ACPI: Fan [FAN3] (off)
[    0.666398] ACPI: Fan [FAN4] (off)
[    0.667967] ACPI: bus type USB registered
[    0.667985] usbcore: registered new interface driver usbfs
[    0.667992] usbcore: registered new interface driver hub
[    0.668060] usbcore: registered new device driver usb
[    0.668757] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.668762] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.670028] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.670042] xhci_hcd 0000:00:14.0: irq 139 for MSI/MSI-X
[    0.670127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.670129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.670130] usb usb1: Product: xHCI Host Controller
[    0.670132] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.670132] usb usb1: SerialNumber: 0000:00:14.0
[    0.670272] hub 1-0:1.0: USB hub found
[    0.670291] hub 1-0:1.0: 16 ports detected
[    0.670741] SCSI subsystem initialized
[    0.671821] libata version 3.00 loaded.
[    0.679456] thermal LNXTHERM:00: registered as thermal_zone0
[    0.679457] ACPI: Thermal Zone [THRM] (49 C)
[    0.685779] thermal LNXTHERM:01: registered as thermal_zone1
[    0.685780] ACPI: Thermal Zone [TZ00] (28 C)
[    0.686949] thermal LNXTHERM:02: registered as thermal_zone2
[    0.686950] ACPI: Thermal Zone [TZ01] (30 C)
[    0.689441] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.689445] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.689472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.689473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.689474] usb usb2: Product: xHCI Host Controller
[    0.689475] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.689476] usb usb2: SerialNumber: 0000:00:14.0
[    0.689624] hub 2-0:1.0: USB hub found
[    0.689643] hub 2-0:1.0: 8 ports detected
[    0.693281] ahci 0000:00:17.0: version 3.0
[    0.693525] ahci 0000:00:17.0: irq 140 for MSI/MSI-X
[    0.708914] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xe impl SATA mode
[    0.708917] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[    0.725454] scsi0 : ahci
[    0.725782] scsi1 : ahci
[    0.726032] scsi2 : ahci
[    0.726294] scsi3 : ahci
[    0.726342] ata1: DUMMY
[    0.726344] ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 140
[    0.726348] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 140
[    0.726350] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 140
[    1.001242] usb 1-7: new full-speed USB device number 2 using xhci_hcd
[    1.045378] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.045398] ata2: SATA link down (SStatus 4 SControl 300)
[    1.045452] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.046525] ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[    1.046528] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.047769] ata4.00: configured for UDMA/133
[    1.048046] ata3.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[    1.050215] ata3.00: configured for UDMA/133
[    1.051509] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUD0N     1.00 PQ: 0 ANSI: 5
[    1.058759] scsi 3:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[    1.072911] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.072913] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.073041] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.073229] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.073231] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    1.073248] sd 3:0:0:0: [sda] Write Protect is off
[    1.073249] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.073257] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.073566] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.073617] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.131770] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[    1.131773] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[    1.131774] usb 1-7: Product: MSI EPF USB
[    1.131776] usb 1-7: Manufacturer: MSI EPF USB
[    1.131777] usb 1-7: SerialNumber: MSI EPF USB
[    1.131859] usb 1-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.134246] usbcore: registered new interface driver usbhid
[    1.134247] usbhid: USB HID core driver
[    1.135108] hid-generic 0003:1770:FF00.0001: hiddev0,hidraw0: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:14.0-7/input0
[    1.150229]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[    1.150830] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.297630] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[    1.374592] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[    1.426776] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2a
[    1.426778] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.431195] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00033/0x240000/0xa0400, board id: 1474, fw id: 793787
[    1.467347] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    1.593994] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[    1.618002] tsc: Refined TSC clocksource calibration: 2303.992 MHz
[    1.752487] usb 1-11: New USB device found, idVendor=5986, idProduct=0683
[    1.752489] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.752490] usb 1-11: Product: BisonCam, NB Pro
[    1.752491] usb 1-11: Manufacturer: Bison
[    1.752492] usb 1-11: SerialNumber: 200901010001
[    1.922430] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[    1.938220] PM: Starting manual resume from disk
[    1.938223] PM: Hibernation image partition 8:8 present
[    1.938224] PM: Looking for hibernation image.
[    1.951651] PM: Image not found (code -22)
[    1.951652] PM: Hibernation image not present or could not be loaded.
[    2.050848] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129
[    2.050851] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.050852] usb 1-12: Product: USB2.0-CRW
[    2.050854] usb 1-12: Manufacturer: Generic
[    2.050855] usb 1-12: SerialNumber: 20100201396000000
[    2.053919] usbcore: registered new interface driver rtsx_usb
[    2.619389] Switched to clocksource tsc
[    2.677343] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    2.973858] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.973965] systemd[1]: Detected architecture 'x86-64'.
[    3.109308] systemd[1]: Inserted module 'autofs4'
[    3.119401] systemd[1]: Set hostname to <Anonymous-PC>.
[    3.929354] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.929394] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.929402] systemd[1]: Starting Remote File Systems (Pre).
[    3.929417] systemd[1]: Reached target Remote File Systems (Pre).
[    3.929430] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.929540] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.929550] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.929568] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.929573] systemd[1]: Starting Encrypted Volumes.
[    3.929579] systemd[1]: Reached target Encrypted Volumes.
[    3.929584] systemd[1]: Expecting device dev-sda8.device...
[    3.929590] systemd[1]: Expecting device dev-disk-by\x2duuid-c465c420\x2dd605\x2d46a1\x2d8c7b\x2de1656507f255.device...
[    3.929595] systemd[1]: Expecting device dev-disk-by\x2duuid-66CA\x2d35F2.device...
[    3.929600] systemd[1]: Expecting device dev-disk-by\x2duuid-7a8dce90\x2db64c\x2d49c8\x2da8e1\x2d52f2f4c46a9c.device...
[    3.929606] systemd[1]: Starting Root Slice.
[    3.929618] systemd[1]: Created slice Root Slice.
[    3.929624] systemd[1]: Starting Delayed Shutdown Socket.
[    3.929644] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.929650] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.929667] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.929672] systemd[1]: Starting Journal Socket (/dev/log).
[    3.929688] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.929696] systemd[1]: Starting udev Control Socket.
[    3.929706] systemd[1]: Listening on udev Control Socket.
[    3.929712] systemd[1]: Starting udev Kernel Socket.
[    3.929723] systemd[1]: Listening on udev Kernel Socket.
[    3.929728] systemd[1]: Starting User and Session Slice.
[    3.929751] systemd[1]: Created slice User and Session Slice.
[    3.929758] systemd[1]: Starting Journal Socket.
[    3.929779] systemd[1]: Listening on Journal Socket.
[    3.929791] systemd[1]: Starting System Slice.
[    3.929812] systemd[1]: Created slice System Slice.
[    3.929819] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    3.929846] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.929859] systemd[1]: Starting Increase datagram queue length...
[    3.930128] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.930377] systemd[1]: Mounting Huge Pages File System...
[    3.930589] systemd[1]: Mounting POSIX Message Queue File System...
[    3.930842] systemd[1]: Mounting Debug File System...
[    3.947303] systemd[1]: Started Set Up Additional Binary Formats.
[    3.965433] systemd[1]: Starting Load Kernel Modules...
[    3.965682] systemd[1]: Starting udev Coldplug all Devices...
[    3.965929] systemd[1]: Starting system-getty.slice.
[    3.965960] systemd[1]: Created slice system-getty.slice.
[    3.965977] systemd[1]: Started File System Check on Root Device.
[    3.965988] systemd[1]: Starting Slices.
[    3.965994] systemd[1]: Reached target Slices.
[    4.020925] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    4.021074] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.207062] systemd[1]: Started udev Coldplug all Devices.
[    4.254694] systemd[1]: Mounted Debug File System.
[    4.254713] systemd[1]: Mounted POSIX Message Queue File System.
[    4.254724] systemd[1]: Mounted Huge Pages File System.
[    4.255029] systemd[1]: Started Increase datagram queue length.
[    4.257637] systemd[1]: Starting Syslog Socket.
[    4.257661] systemd[1]: Listening on Syslog Socket.
[    4.257672] systemd[1]: Starting Journal Service...
[    4.257955] systemd[1]: Started Journal Service.
[    4.277748] lp: driver loaded but no devices found
[    4.330092] ppdev: user-space parallel port driver
[    4.404043] fuse init (API version 7.23)
[    4.430620] systemd-udevd[186]: starting version 215
[    5.294893] Monitor-Mwait will be used to enter C-1 state
[    5.294901] Monitor-Mwait will be used to enter C-2 state
[    5.294919] Monitor-Mwait will be used to enter C-3 state
[    5.294927] ACPI: acpi_idle registered with cpuidle
[    5.371718] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:01/PNP0C0D:00/input/input3
[    5.373979] ACPI: Lid Switch [LID0]
[    5.374045] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    5.374047] ACPI: Sleep Button [SLPB]
[    5.374074] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    5.374076] ACPI: Power Button [PWRB]
[    5.374111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.374113] ACPI: Power Button [PWRF]
[    5.376456] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.535095] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    5.542944] ACPI: Battery Slot [BAT1] (battery present)
[    5.543227] wmi: Mapper loaded
[    5.548776] ACPI: AC Adapter [ADP1] (off-line)
[    5.564518] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.564743] snd_hda_intel 0000:00:1f.3: irq 141 for MSI/MSI-X
[    5.671380] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    5.707191] EFI Variables Facility v0.08 2004-May-17
[    5.791182] Bluetooth: Core ver 2.19
[    5.791196] NET: Registered protocol family 31
[    5.791197] Bluetooth: HCI device and connection manager initialized
[    5.791202] Bluetooth: HCI socket layer initialized
[    5.791204] Bluetooth: L2CAP socket layer initialized
[    5.791210] Bluetooth: SCO socket layer initialized
[    5.820232] [drm] Initialized drm 1.1.0 20060810
[    5.897453] sound hdaudioC0D0: autoconfig: line_outs=3 (0x15/0x1b/0x1a/0x0/0x0) type:speaker
[    5.897456] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.897458] sound hdaudioC0D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    5.897459] sound hdaudioC0D0:    mono: mono_out=0x0
[    5.897460] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    5.897461] sound hdaudioC0D0:    inputs:
[    5.897462] sound hdaudioC0D0:      Mic=0x18
[    5.897464] sound hdaudioC0D0:      Internal Mic=0x12
[    6.051799] usbcore: registered new interface driver btusb
[    6.066293] Bluetooth: hci0: read Intel version: 370810011003110e00
[    6.075765] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    6.075817] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    6.075862] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    6.095962] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[    6.095995] bluetooth hci0: Direct firmware load failed with error -2
[    6.095996] bluetooth hci0: Falling back to user helper
[    6.164535] pstore: Registered efi as persistent store backend
[    6.267081] MXM: GUID detected in BIOS
[    6.267117] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    6.267168] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    6.267211] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    6.267372] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    6.267374] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    6.267387] checking generic (b0000000 7f0000) vs hw (c0000000 10000000)
[    6.267389] checking generic (b0000000 7f0000) vs hw (d0000000 2000000)
[    6.267410] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    6.267571] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x1171a0a2
[    6.267572] nouveau  [  DEVICE][0000:01:00.0] Chipset: GM107 (NV117)
[    6.267574] nouveau  [  DEVICE][0000:01:00.0] Family : NV110
[    6.267593] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    6.267605] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    6.267606] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    6.398599] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    6.398600] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[    6.398749] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    6.398751] nouveau  [   VBIOS][0000:01:00.0] version 82.07.88.00.0a
[    6.398979] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[    6.398991] nouveau  [   VBIOS][0000:01:00.0] running init tables
[    6.420834] AVX2 version of gcm_enc/dec engaged.
[    6.422055] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    8.519852] nouveau 0000:01:00.0: irq 142 for MSI/MSI-X
[    8.519863] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    8.520214] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x3c7e3c [ IBUS ]
[    8.520376] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    8.520378] nouveau  [     PFB][0000:01:00.0] RAM size: 1975398418 MiB
[    8.520379] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    8.521402] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x10f65c [ IBUS ]
[    8.522764] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x101000 [ TIMEOUT ]
[    8.638545] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x0880b8 [ TIMEOUT ]
[    8.764727] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x0880b8 [ TIMEOUT ]
[    8.769644] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x022438 [ TIMEOUT ]
[    8.868950] input: MSI WMI hotkeys as /devices/virtual/input/input11
[   12.461934] nouveau E[   PIBUS][0000:01:00.0] HUB0: 0x11e924 0x00000100 (0x1a400200)
[   12.461989] nouveau E[   PIBUS][0000:01:00.0] ROP0: 0x10f900 0xaaaaaaaa (0x1d408201)
[   12.463522] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
[   12.463602] nouveau  [     CLK][0000:01:00.0] 0a: core 270-928 MHz memory 1600 MHz
[   12.463715] nouveau  [     CLK][0000:01:00.0] 0f: core 270-928 MHz memory 5010 MHz
[   12.464091] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x132020 [ IBUS ]
[   12.464117] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz  
[   12.464656] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
[   12.477346] nouveau  [  PGRAPH][0000:01:00.0] using external firmware
[   12.477355] nouveau 0000:01:00.0: firmware: failed to load nouveau/nv117_fuc409c (-2)
[   12.477376] nouveau 0000:01:00.0: Direct firmware load failed with error -2
[   12.477377] nouveau 0000:01:00.0: Falling back to user helper
[   12.477585] nouveau 0000:01:00.0: firmware: failed to load nouveau/fuc409c (-2)
[   12.477624] nouveau 0000:01:00.0: Direct firmware load failed with error -2
[   12.477625] nouveau 0000:01:00.0: Falling back to user helper
[   12.477848] nouveau E[  DEVICE][0000:01:00.0] failed to create 0x18000717, -22
[   12.477887] nouveau E[     DRM] failed to create 0x80000080, -22
[   12.478657] nouveau: probe of 0000:01:00.0 failed with error -22
[   12.523329] alg: No test for crc32 (crc32-pclmul)
[   12.566949] media: Linux media interface: v0.10
[   12.588378] Linux video capture interface: v2.00
[   12.620862] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0683)
[   12.623497] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input12
[   12.623547] usbcore: registered new interface driver uvcvideo
[   12.623547] USB Video Class driver (1.1.1)
[   12.712400] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
[   12.712404] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
[   12.716577] Bluetooth: hci0: Intel Bluetooth firmware patch completed
[   12.900089] Adding 7986172k swap on /dev/sda8.  Priority:-1 extents:1 across:7986172k FS
[   13.309817] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   13.890709] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[   14.091168] systemd-journald[182]: Received request to flush runtime journal from PID 1
[   14.878199] RPC: Registered named UNIX socket transport module.
[   14.878205] RPC: Registered udp transport module.
[   14.878207] RPC: Registered tcp transport module.
[   14.878210] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.904152] FS-Cache: Loaded
[   14.943264] FS-Cache: Netfs 'nfs' registered for caching
[   14.978404] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   16.984385] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.984391] Bluetooth: BNEP filters: protocol multicast
[   16.984401] Bluetooth: BNEP socket layer initialized
[   25.825402] atkbd serio0: Unknown key pressed (translated set 2, code 0x98 on isa0060/serio0).
[   25.825411] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[   25.827987] atkbd serio0: Unknown key released (translated set 2, code 0x98 on isa0060/serio0).
[   25.827992] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[  180.775895] PM: Syncing filesystems ... done.
[  180.831236] PM: Preparing system for mem sleep
[  181.225062] (NULL device *): firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
[  181.225119] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  181.226489] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  181.227719] PM: Entering mem sleep
[  181.228471] Suspending console(s) (use no_console_suspend to debug)
[  181.229144] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[  181.229404] sd 3:0:0:0: [sda] Stopping disk
[  181.762411] PM: suspend of devices complete after 532.983 msecs
[  181.762970] PM: late suspend of devices complete after 0.554 msecs
[  181.764133] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  181.778957] PM: noirq suspend of devices complete after 15.964 msecs
[  181.794511] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  181.794698] PM: noirq resume of devices complete after 15.201 msecs
[  181.795266] PM: early resume of devices complete after 0.524 msecs
[  181.795768] snd_hda_intel 0000:00:1f.3: irq 141 for MSI/MSI-X
[  181.799906] sd 3:0:0:0: [sda] Starting disk
[  182.115055] usb 1-7: reset full-speed USB device number 2 using xhci_hcd
[  182.126809] ata2: SATA link down (SStatus 4 SControl 300)
[  182.126839] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  182.129699] ata4.00: configured for UDMA/133
[  182.134819] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  182.142310] ata3.00: configured for UDMA/133
[  182.244257] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88027625f140
[  182.244277] usb 1-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[  182.244950] dpm_run_callback(): usb_dev_resume+0x0/0x20 [usbcore] returns -32
[  182.244982] PM: Device 1-7 failed to resume async: error -32
[  182.245140] PM: resume of devices complete after 449.307 msecs
[  182.245843] PM: Finishing wakeup.
[  182.245846] Restarting tasks ...
[  182.246034] usb 1-7: USB disconnect, device number 2
[  182.246274] done.
[  182.359122] usb 1-7: new full-speed USB device number 6 using xhci_hcd
[  182.415357] PM: Syncing filesystems ...
[  182.462761] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[  182.489821] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[  182.489828] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[  182.489831] usb 1-7: Product: MSI EPF USB
[  182.489834] usb 1-7: Manufacturer: MSI EPF USB
[  182.489837] usb 1-7: SerialNumber: MSI EPF USB
[  182.490073] usb 1-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[  182.492491] hid-generic 0003:1770:FF00.0002: hiddev0,hidraw0: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:14.0-7/input0
[  182.786316] done.
[  182.786325] PM: Preparing system for freeze sleep
[  183.051981] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  183.053440] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  183.054717] PM: Entering freeze sleep
[  183.054723] Suspending console(s) (use no_console_suspend to debug)
[  183.055387] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[  183.055640] sd 3:0:0:0: [sda] Stopping disk
[  183.616852] PM: suspend of devices complete after 561.138 msecs
[  183.617567] PM: late suspend of devices complete after 0.709 msecs
[  183.618821] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  183.618857] PM: noirq suspend of devices complete after 1.285 msecs
[  220.368455] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  220.382582] PM: noirq resume of devices complete after 14.420 msecs
[  220.383269] PM: early resume of devices complete after 0.632 msecs
[  220.383763] snd_hda_intel 0000:00:1f.3: irq 141 for MSI/MSI-X
[  220.384636] sd 3:0:0:0: [sda] Starting disk
[  220.699081] usb 1-7: reset full-speed USB device number 6 using xhci_hcd
[  220.710841] ata2: SATA link down (SStatus 4 SControl 300)
[  220.710872] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  220.717072] ata3.00: configured for UDMA/133
[  220.718856] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  220.721413] ata4.00: configured for UDMA/133
[  220.828437] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802774d34c0
[  220.828458] usb 1-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[  220.829142] dpm_run_callback(): usb_dev_resume+0x0/0x20 [usbcore] returns -32
[  220.829155] PM: Device 1-7 failed to resume async: error -32
[  220.829265] PM: resume of devices complete after 445.434 msecs
[  220.829971] PM: Finishing wakeup.
[  220.829973] Restarting tasks ... done.
[  220.831232] usb 1-7: USB disconnect, device number 6
[  221.000538] usb 1-7: new full-speed USB device number 7 using xhci_hcd
[  221.055167] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[  221.186455] usb 1-7: New USB device found, idVendor=1770, idProduct=ff00
[  221.186463] usb 1-7: New USB device strings: Mfr=1, Product=1, SerialNumber=1
[  221.186468] usb 1-7: Product: MSI EPF USB
[  221.186472] usb 1-7: Manufacturer: MSI EPF USB
[  221.186475] usb 1-7: SerialNumber: MSI EPF USB
[  221.186718] usb 1-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[  221.189019] hid-generic 0003:1770:FF00.0003: hiddev0,hidraw0: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:14.0-7/input0
[  243.652756] atkbd serio0: Unknown key pressed (translated set 2, code 0x98 on isa0060/serio0).
[  243.652763] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[  243.655344] atkbd serio0: Unknown key released (translated set 2, code 0x98 on isa0060/serio0).
[  243.655348] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[  867.991117] atkbd serio0: Unknown key pressed (translated set 2, code 0x97 on isa0060/serio0).
[  867.991126] atkbd serio0: Use 'setkeycodes e017 <keycode>' to make it known.
[  867.997142] atkbd serio0: Unknown key released (translated set 2, code 0x97 on isa0060/serio0).
[  867.997147] atkbd serio0: Use 'setkeycodes e017 <keycode>' to make it known.
[  884.861916] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[  884.879352] usb 2-3: New USB device found, idVendor=04e8, idProduct=61b5
[  884.879360] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  884.879364] usb 2-3: Product: Samsung M3 Portable
[  884.879368] usb 2-3: Manufacturer: Samsung M3 Portable
[  884.879371] usb 2-3: SerialNumber: 0E697DF411000011
[  885.198701] usb-storage 2-3:1.0: USB Mass Storage device detected
[  885.198831] scsi4 : usb-storage 2-3:1.0
[  885.199414] usbcore: registered new interface driver usb-storage
[  886.199907] scsi 4:0:0:0: Direct-Access     Samsung  M3 Portable      1404 PQ: 0 ANSI: 6
[  886.200541] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  886.201567] sd 4:0:0:0: [sdb] Spinning up disk...
[  887.204589] .ready
[  887.204998] sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[  887.205343] sd 4:0:0:0: [sdb] Write Protect is off
[  887.205352] sd 4:0:0:0: [sdb] Mode Sense: 33 00 00 08
[  887.205688] sd 4:0:0:0: [sdb] No Caching mode page found
[  887.205696] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  887.235758]  sdb: sdb1
[  887.237370] sd 4:0:0:0: [sdb] Attached SCSI disk
[  903.749370] usb 1-4: new full-speed USB device number 8 using xhci_hcd
[  903.877808] usb 1-4: not running at top speed; connect to a high speed hub
[  903.878766] usb 1-4: New USB device found, idVendor=1e7d, idProduct=2e4a
[  903.878774] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  903.878778] usb 1-4: Product: ROCCAT Tyon Black
[  903.878781] usb 1-4: Manufacturer: ROCCAT
[  903.878785] usb 1-4: SerialNumber: ROC-11-850
[  903.879073] usb 1-4: ep 0x84 - rounding interval to 64 microframes, ep desc says 80 microframes
[  903.880942] input: ROCCAT ROCCAT Tyon Black as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1E7D:2E4A.0004/input/input13
[  903.882597] hid-generic 0003:1E7D:2E4A.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [ROCCAT ROCCAT Tyon Black] on usb-0000:00:14.0-4/input0
[  903.883511] input: ROCCAT ROCCAT Tyon Black as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:1E7D:2E4A.0005/input/input14
[  903.883765] hid-generic 0003:1E7D:2E4A.0005: input,hidraw2: USB HID v1.11 Keyboard [ROCCAT ROCCAT Tyon Black] on usb-0000:00:14.0-4/input1
[  903.884829] input: ROCCAT ROCCAT Tyon Black as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:1E7D:2E4A.0006/input/input15
[  903.885179] hid-generic 0003:1E7D:2E4A.0006: input,hidraw3: USB HID v1.11 Joystick [ROCCAT ROCCAT Tyon Black] on usb-0000:00:14.0-4/input2
[  903.886180] hid-generic 0003:1E7D:2E4A.0007: hiddev0,hidraw4: USB HID v1.11 Device [ROCCAT ROCCAT Tyon Black] on usb-0000:00:14.0-4/input3
[ 1043.815726] usb 1-8: new high-speed USB device number 9 using xhci_hcd
[ 1043.945388] usb 1-8: New USB device found, idVendor=0e8d, idProduct=2008
[ 1043.945397] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 1043.945401] usb 1-8: Product: thor
[ 1043.945405] usb 1-8: Manufacturer: MediaTek
[ 1043.945408] usb 1-8: SerialNumber: K06TJ65050005450
[ 1058.556349] usb 1-8: USB disconnect, device number 9
[ 1058.922427] usb 1-8: new high-speed USB device number 10 using xhci_hcd
[ 1059.051338] usb 1-8: New USB device found, idVendor=0e8d, idProduct=2004
[ 1059.051345] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 1059.051349] usb 1-8: Product: thor
[ 1059.051352] usb 1-8: Manufacturer: MediaTek
[ 1059.051355] usb 1-8: SerialNumber: K06TJ65050005450
[ 1059.127178] usbcore: registered new interface driver cdc_ether
[ 1059.132961] rndis_host 1-8:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-8, RNDIS device, 66:ce:97:5a:27:d0
[ 1059.133262] usbcore: registered new interface driver rndis_host
[ 1059.196589] cfg80211: Calling CRDA to update world regulatory domain
[ 1059.329568] cfg80211: World regulatory domain updated:
[ 1059.329575] cfg80211:  DFS Master region: unset
[ 1059.329577] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1059.329582] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 1059.329587] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1059.329590] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 1059.329594] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1059.329598] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1059.329602] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 1059.329605] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 1059.329608] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)


Edit à toto :
Mis le retour de la commande dans les balises Autre code.

Hors ligne

#19 06-02-2017 19:00:11

remy.labene
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Effectivement la carte wifi n'est pas configuré, il faudrait le message suivant dans tes logs :

Intel(R) Wireless WiFi driver for Linux
[    3.366610] Copyright(c) 2003- 2015 Intel Corporation
[    3.366645] iwlwifi 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[    3.367060] snd_hda_intel 0000:00:1f.3: PCI->APIC IRQ transform: INT A -> IRQ 16
[    3.370897] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2)
[    3.370957] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[    3.370965] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2)
[    3.371021] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[    3.371026] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2)
[    3.371082] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    3.371087] iwlwifi 0000:02:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2)
[    3.371144] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    3.379643] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-22.ucode
[    3.379816] iwlwifi 0000:02:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    3.389918] intel_rapl: Found RAPL domain package
[    3.389920] intel_rapl: Found RAPL domain core
[    3.389921] intel_rapl: Found RAPL domain uncore
[    3.389922] intel_rapl: Found RAPL domain dram
[    3.394496] random: crng init done
[    3.397532] Adding 7812092k swap on /dev/sda3.  Priority:-1 extents:1 across:7812092k SSFS
[    3.410459] snd_hda_intel 0000:00:1f.3: failed to add i915 component master (-19)
[    3.435482] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210


Il faut vérifier si le module se charge  : 

lsmod | grep iwlwifi


qui doit donner :

iwlwifi               151552  1 iwlmvm
cfg80211         589824  3 iwlmvm,iwlwifi,mac80211


sinon il faut tenter :

insmod iwlwifi


et voir la réponse...

Edit à toto :
Mis les retours de commande et les commandes user sous les balises du forum

Hors ligne

#20 06-02-2017 19:25:01

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 9 (stretch) 64 bits + backports
Noyau : 4.9.65-3+deb9u2
(G)UI : gnome
Inscription : 21-10-2008

Re : Installation de debian 8 sans internet

Holà les amis !
Pour rendre les commandes et leurs retours ainsi que les configurations plus lisibles par tous, on utilise les balises du forum.
Voir le tuto en chocolat, là :
Voir le tuto : Le code, ça pique moins les yeux en couleur

toto vous a réglé cela dans vos posts précédents, pour voir bien comme y faut comment que t'est-ce que c'est fait, vous éditez vos posts par Modifier au bas de chacun d'eux et vous voyez voir comment que c'est bien plus bô avec, même !

/me s'empoche le point choco sur ce coup-là.
... 10-228a.gif

"Théo et Adama te rappellent pourquoi Zyed et Bouna couraient…"
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

Hors ligne

#21 06-02-2017 20:01:31

robert2a
Membre
Lieu : France
Inscription : 15-11-2014

Re : Installation de debian 8 sans internet

Bonsoir
si ton sources.list  est correct , peut etre la version des backports


apt-get install -t jessie-backports firmware-iwlwifi
 



lien => https://packages.debian.org/fr/jessie-b … re-iwlwifi

Dernière modification par robert2a (06-02-2017 20:02:49)

Hors ligne

#22 06-02-2017 20:15:54

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Désolé du dérangement Smolski ^^'
J'ai essayé ce que tu m'a proposé Remy. La premier commande ne me retourne rien et la deuxième me retourne que la commande n'existe paq dans le bash shell :

bash: insmod : commande introuvable



Concernant ce que tu me propose robert2a, je ne peux pas essayer tout de suite, mais demain matin j'essaierais et je mettrais les retours ici.

Hors ligne

#23 06-02-2017 21:08:35

remy.labene
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Tu es en root ? Sinon, ne te prend pas trop la tête, installe Debian 9, ça devrait mieux passer.

Hors ligne

#24 06-02-2017 21:29:29

èfpé
Membre
Inscription : 10-07-2016

Re : Installation de debian 8 sans internet

Bonsoir à tous,

Installer la version rétroportée du paquet firmware-iwlwifi apportera effectivement les firmwares manquants, mais cela ne suffira probablement pas, car le périphérique Intel Dual Band Wireless-AC 3165 n'est semble-t-il pris en charge par le noyau qu'à partir de la version 3.17/4.0 voire 4.1, selon la source (cf. ici et/ou ). À confirmer éventuellement avec :

lspci -nnk | grep Network -A 2

Dernière modification par èfpé (06-02-2017 22:51:51)

Hors ligne

#25 07-02-2017 11:26:50

Sora Okinawa
Membre
Inscription : 05-02-2017

Re : Installation de debian 8 sans internet

Yo !

@remy.labene Donc, j'ai retesté tes commandes en root puisque je n'étais pas en root. Cette première commande :

lsmod | grep iwlwifi


ne m'affiche toujours rien, mais la deuxième :

insmod iwlwifi

m'affiche quelque chose de différent :

insmod: ERROR: could not load module iwlwifi: No such file or directory



Ensuite, je ne souhaites pas passer sous debian 9, je préfère me familiariser avec 8 d'abord, pourquoi pas plus tard.

@robert2a j'ai testé cette commande, et malheureusement cela ne change rien.

@èfpé Le résultat de ta commande est celui-ci :

02:00.0 Network controller [0280]: Intel Corporation Device [8086:3165] (rev 81)
Subsystem: Intel Corporation Device [8086:4010]
03:00.0 Ethernet controlelr [0200: Qualcomm Atheros Device [1969:e0a1] (rev 10)



Donc je suppose que la version qu'il me faut est la 4.1 du pilote vu que j'ai l'air d'avoir la version 4.0.

Cordialement,

Sora

EDIT : Genial, maintenant j'ai un reboot: system halted a chaque fois que j'éteins le PC, mon touchpad ne fonctionne plus et je n'ai plus l'applet Batterie.. TT;TT J'suis maudit avec Debian je crois xD

Dernière modification par Sora Okinawa (07-02-2017 11:51:12)

Hors ligne

Pied de page des forums