Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 25-04-2017 09:28:26

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

[résolu] acpi error

bonjour ,

j'ai , par bêtise peut être , upgradé mon kernel en utilisant les backports .

pour ce faire , j'ai suivi le tuto suivant (à cause de sa simplicité) :

https://www.abyssproject.net/2016/07/ga … n-ansible/

j'ai pris l'installation standard .

linux redémarre bien . la preuve .

alain@debian:~$ uname -r


4.9.0-0.bpo.2-amd64



alain@debian:~$ uname -a


Linux debian 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.18-1~bpo8+1 (2017-04-10) x86_64 GNU/Linux



mais , au démarrage , j'obtiens un superbe "acpi error"

je vous aurai bien recopié ici le message d'erreur , mais , je ne sais pas où le trouver .

qqun pour m'aider à résoudre ce petit problème ?

Dernière modification par Debian Alain (26-04-2017 15:30:54)


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#2 25-04-2017 09:50:36

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

j'ai trouvé le sujet suivant :

https://debian-facile.org/viewtopic.php?id=16645

d'où j'ai tiré les tentatives suivantes :

la dernière commande :

root@debian:/home/alain# dmesg -l err,crit,warn



vous montrera mon erreur acpi dont je cherchais le message depuis le départ .

j'ai fait tout ce que j'ai pu , je redémarre , on verra bien .



root@debian:/home/alain# dmesg -l warn


[    0.008853] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008853] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.662139] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.754835] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    1.181648] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.699523] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.699530] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.699532] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.699534] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.699536] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.521055] uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized!
[   10.521060] uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized!
[   10.521062] uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!
root@debian:/home/alain#



root@debian:/home/alain# dmesg | grep -i microcode


[    0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[    1.091820] microcode: sig=0x206a7, pf=0x2, revision=0x29
[    1.092028] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
root@debian:/home/alain#



root@debian:/home/alain# apt-get install intel-microcode


Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
intel-microcode est déjà la plus récente version disponible.
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  libmemcached11 libmemcachedutil2 libuuid-perl
Veuillez utiliser « apt-get autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 14 non mis à jour.
root@debian:/home/alain#



root@debian:/home/alain# dmidecode -t bios


# dmidecode 2.12
SMBIOS 2.7 present.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
  Vendor: American Megatrends Inc.
  Version: 2501
  Release Date: 07/21/2014
  Address: 0xF0000
  Runtime Size: 64 kB
  ROM Size: 8192 kB
  Characteristics:
    PCI is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    Boot from CD is supported
    Selectable boot is supported
    BIOS ROM is socketed
    EDD is supported
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 kB floppy services are supported (int 13h)
    3.5"/2.88 MB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    ACPI is supported
    USB legacy is supported
    BIOS boot specification is supported
    Targeted content distribution is supported
    UEFI is supported
  BIOS Revision: 4.6

Handle 0x006B, DMI type 13, 22 bytes
BIOS Language Information
  Language Description Format: Long
  Installable Languages: 8
    en|US|iso8859-1
    fr|FR|iso8859-1
    es|ES|iso8859-1
    de|DE|iso8859-1
    ru|RU|iso8859-5
    ja|JP|unicode
    zh|TW|unicode
    zh|CN|unicode
  Currently Installed Language: en|US|iso8859-1

root@debian:/home/alain#



root@debian:/home/alain# lshw -short


Chemin matériel       Périphérique  Classe         Description
=================================================================
                                       system         Computer
/0                                     bus            Motherboard
/0/0                                   memory         15GiB Mémoire système
/0/1                                   processor      Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
/0/100                                 bridge         2nd Generation Core Processor Family DRAM Controller
/0/100/1                               bridge         Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port
/0/100/1/0                             bus            VL805 USB 3.0 Host Controller
/0/100/1/0/0           usb7            bus            xHCI Host Controller
/0/100/1/0/0/1                         bus            USB2.0 Hub
/0/100/1/0/1           usb8            bus            xHCI Host Controller
/0/100/2                               display        2nd Generation Core Processor Family Integrated Graphics Controller
/0/100/14                              bus            7 Series/C210 Series Chipset Family USB xHCI Host Controller
/0/100/14/0            usb4            bus            xHCI Host Controller
/0/100/14/1            usb6            bus            xHCI Host Controller
/0/100/16                              communication  7 Series/C210 Series Chipset Family MEI Controller #1
/0/100/1a                              bus            7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
/0/100/1a/1            usb1            bus            EHCI Host Controller
/0/100/1a/1/1                          bus            Integrated Rate Matching Hub
/0/100/1a/1/1/1                        generic        EMV Smartcard Reader
/0/100/1a/1/1/2        scsi10          storage        Mass Storage Device
/0/100/1a/1/1/2/0.0.0  /dev/sdc        disk           SCSI Disk
/0/100/1a/1/1/2/0.0.1  /dev/sdd        disk           SCSI Disk
/0/100/1a/1/1/2/0.0.2  /dev/sde        disk           SCSI Disk
/0/100/1a/1/1/2/0.0.3  /dev/sdf        disk           SCSI Disk
/0/100/1b                              multimedia     7 Series/C210 Series Chipset Family High Definition Audio Controller
/0/100/1c                              bridge         7 Series/C210 Series Chipset Family PCI Express Root Port 1
/0/100/1c.4                            bridge         7 Series/C210 Series Chipset Family PCI Express Root Port 5
/0/100/1c.4/0          eth0            network        RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/1c.5                            bridge         82801 PCI Bridge
/0/100/1c.5/0                          bridge         ASM1083/1085 PCIe to PCI Bridge
/0/100/1c.5/0/1                        bus            OHCI USB Controller
/0/100/1c.5/0/1/1      usb5            bus            OHCI PCI host controller
/0/100/1c.5/0/1.1                      bus            OHCI USB Controller
/0/100/1c.5/0/1.1/1    usb9            bus            OHCI PCI host controller
/0/100/1c.5/0/1.2                      bus            uPD72010x USB 2.0 Controller
/0/100/1c.5/0/1.2/1    usb3            bus            EHCI Host Controller
/0/100/1c.5/0/1.2/1/4                  multimedia     HP Webcam HD 4310
/0/100/1c.5/0/2                        multimedia     SAA7131/SAA7133/SAA7135 Video Broadcast Decoder
/0/100/1c.7                            bridge         7 Series/C210 Series Chipset Family PCI Express Root Port 8
/0/100/1c.7/0                          storage        Marvell Technology Group Ltd.
/0/100/1d                              bus            7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
/0/100/1d/1            usb2            bus            EHCI Host Controller
/0/100/1d/1/1                          bus            Integrated Rate Matching Hub
/0/100/1d/1/1/5                        multimedia     USB Audio Controller
/0/100/1d/1/1/6                        multimedia     USB PnP Sound Device
/0/100/1d/1/1/7                        input          USB Receiver
/0/100/1f                              bridge         Z77 Express Chipset LPC Controller
/0/100/1f.2                            storage        7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode]
/0/100/1f.3                            bus            7 Series/C210 Series Chipset Family SMBus Controller
/0/2                   scsi0           storage        
/0/2/0.0.0             /dev/sda        disk           2TB ST2000DL003-9VT1
/0/2/0.0.0/1           /dev/sda1       volume         100MiB Windows NTFS volume
/0/2/0.0.0/2           /dev/sda2       volume         963GiB Windows NTFS volume
/0/2/0.0.0/3           /dev/sda3       volume         899GiB Extended partition
/0/2/0.0.0/3/5         /dev/sda5       volume         44GiB Linux filesystem partition
/0/2/0.0.0/3/6         /dev/sda6       volume         31GiB Linux swap / Solaris partition
/0/2/0.0.0/3/7         /dev/sda7       volume         823GiB Linux filesystem partition
/0/3                   scsi1           storage        
/0/3/0.0.0             /dev/sdb        disk           3TB ST3000DM001-1CH1
/0/3/0.0.0/1           /dev/sdb1       volume         2794GiB Windows NTFS volume
/0/4                   scsi3           storage        
/0/4/0.0.0             /dev/cdrom      disk           BD-RE  BH10LS38
/0/5                   scsi4           storage        
/0/5/0.0.0             /dev/sr1        disk           BD-RE  BH10LS38
root@debian:/home/alain#



root@debian:/home/alain# dmesg -l err,crit,warn


[    0.008853] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.008853] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.662139] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.754835] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    1.181648] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.610071] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.610256] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff95accf4c0320), AE_NOT_FOUND (20160831/psparse-543)
[    1.611411] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.611593] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff95accf4c0320), AE_NOT_FOUND (20160831/psparse-543)
[    1.612974] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.613158] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff95accf4c0a78), AE_NOT_FOUND (20160831/psparse-543)
[    1.614415] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614599] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff95accf4c0a78), AE_NOT_FOUND (20160831/psparse-543)
[    1.617819] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.618000] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff95accf4c0d48), AE_NOT_FOUND (20160831/psparse-543)
[    1.618291] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.618475] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff95accf4c0050), AE_NOT_FOUND (20160831/psparse-543)
[    1.621815] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.622022] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff95accf4c0d48), AE_NOT_FOUND (20160831/psparse-543)
[    1.627655] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.627862] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff95accf4c0050), AE_NOT_FOUND (20160831/psparse-543)
[    7.699523] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.699530] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.699532] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.699534] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.699536] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.355149] kvm: disabled by bios
[   10.521055] uvcvideo 3-4:1.0: Entity type for entity Extension 4 was not initialized!
[   10.521060] uvcvideo 3-4:1.0: Entity type for entity Processing 2 was not initialized!
[   10.521062] uvcvideo 3-4:1.0: Entity type for entity Camera 1 was not initialized!
root@debian:/home/alain#

Dernière modification par Debian Alain (25-04-2017 09:56:45)


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#3 25-04-2017 09:56:40

Croutons
Membre
Distrib. : Handylinux 2.5 vers Jessie et Debian Stretch
Noyau : Linux 3.16.0-4-686-pae, Linux 4.9.0-7-686-pae
(G)UI : xfce
Inscription : 16-12-2016

Re : [résolu] acpi error

Bonjour
Regarde avec la commande

dmesg


tu devrais retrouvé ton code "ACPI Error"
ou avec un filtre pour retrouver la ligne genre

dmesg | grep ACPI Error


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<--
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#4 25-04-2017 10:17:46

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

je me suis inspiré de tes conseils , croutons .

voilà ce que donne

root@debian:/home/alain# dmesg | grep ACPI


[    0.000000] BIOS-e820: [mem 0x00000000cc962000-0x00000000cc972fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cc973000-0x00000000cca9afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd7fd000-0x00000000cd83ffff] ACPI NVS
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CC966080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CC9710C8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CC966188 00AF3B (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CCA99080 000040
[    0.000000] ACPI: APIC 0x00000000CC9711D8 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CC971270 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000CC9712B8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CC9712F8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CC971330 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: BGRT 0x00000000CC972BF8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CC9716F8 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CC9720A8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000CC972B40 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000035] ACPI: Core revision 20160831
[    0.004586] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.633083] PM: Registering ACPI NVS region [mem 0xcc973000-0xcca9afff] (1212416 bytes)
[    0.633110] PM: Registering ACPI NVS region [mem 0xcd7fd000-0xcd83ffff] (274432 bytes)
[    0.662023] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.662024] ACPI: bus type PCI registered
[    0.662026] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.682312] ACPI: Added _OSI(Module Device)
[    0.682313] ACPI: Added _OSI(Processor Device)
[    0.682313] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682314] ACPI: Added _OSI(Processor Aggregator Device)
[    0.682469] ACPI: Executed 1 blocks of module-level executable AML code
[    0.685457] ACPI: Dynamic OEM Table Load:
[    0.685462] ACPI: SSDT 0xFFFF9DA50D7A1000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.685725] ACPI: Dynamic OEM Table Load:
[    0.685729] ACPI: SSDT 0xFFFF9DA50D7F8C00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.685928] ACPI: Dynamic OEM Table Load:
[    0.685931] ACPI: SSDT 0xFFFF9DA50D043C00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.687148] ACPI: Interpreter enabled
[    0.687162] ACPI: (supports S0 S3 S4 S5)
[    0.687163] ACPI: Using IOAPIC for interrupt routing
[    0.687184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.692064] ACPI: Power Resource [FN00] (off)
[    0.692128] ACPI: Power Resource [FN01] (off)
[    0.692192] ACPI: Power Resource [FN02] (off)
[    0.692255] ACPI: Power Resource [FN03] (off)
[    0.692317] ACPI: Power Resource [FN04] (off)
[    0.692760] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.693527] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.693793] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.694132] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.694287] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.694499] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.694645] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.694789] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.694932] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.695107] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.710411] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.726252] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.727587] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.742474] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.742513] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.742550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.742587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.742624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.742661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.742698] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.742735] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.742930] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.743093] PCI: Using ACPI for IRQ routing
[    0.751348] pnp: PnP ACPI init
[    0.751433] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.751502] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.751522] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.751564] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.751630] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.751673] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.751870] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.752042] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.752155] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.752170] pnp: PnP ACPI: found 9 devices
[    1.181670] ACPI: Thermal Zone [TZ00] (28 C)
[    1.181973] ACPI: Thermal Zone [TZ01] (30 C)
[    1.190433] ACPI: bus type USB registered
[    1.613964] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614154] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.614430] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614614] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.615360] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.615559] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.615848] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.616041] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.621716] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.621894] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.622167] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.622345] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
[    1.625691] ACPI Error:
[    1.625821] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.631520] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.631723] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
[    7.359177] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.359188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.359191] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359195] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.359196] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.359201] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359205] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.395490] ACPI: Power Button [PWRB]
[    7.395544] ACPI: Power Button [PWRF]
[    8.231580] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
root@debian:/home/alain#



root@debian:/home/alain# dmesg |grep 'ACPI Error'


[    1.613964] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614154] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.614430] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614614] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.615360] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.615559] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.615848] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.616041] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.621716] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.621894] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.622167] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.622345] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
[    1.625691] ACPI Error:
[    1.625821] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.631520] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.631723] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
root@debian:/home/alain#


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#5 25-04-2017 10:19:40

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

je me suis inspiré de tes conseils , croutons .

voilà ce que donne

root@debian:/home/alain# dmesg | grep ACPI


[    0.000000] BIOS-e820: [mem 0x00000000cc962000-0x00000000cc972fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cc973000-0x00000000cca9afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd7fd000-0x00000000cd83ffff] ACPI NVS
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CC966080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CC9710C8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CC966188 00AF3B (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000CCA99080 000040
[    0.000000] ACPI: APIC 0x00000000CC9711D8 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CC971270 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000CC9712B8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CC9712F8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CC971330 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: BGRT 0x00000000CC972BF8 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CC9716F8 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CC9720A8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000CC972B40 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000035] ACPI: Core revision 20160831
[    0.004586] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.633083] PM: Registering ACPI NVS region [mem 0xcc973000-0xcca9afff] (1212416 bytes)
[    0.633110] PM: Registering ACPI NVS region [mem 0xcd7fd000-0xcd83ffff] (274432 bytes)
[    0.662023] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.662024] ACPI: bus type PCI registered
[    0.662026] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.682312] ACPI: Added _OSI(Module Device)
[    0.682313] ACPI: Added _OSI(Processor Device)
[    0.682313] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682314] ACPI: Added _OSI(Processor Aggregator Device)
[    0.682469] ACPI: Executed 1 blocks of module-level executable AML code
[    0.685457] ACPI: Dynamic OEM Table Load:
[    0.685462] ACPI: SSDT 0xFFFF9DA50D7A1000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.685725] ACPI: Dynamic OEM Table Load:
[    0.685729] ACPI: SSDT 0xFFFF9DA50D7F8C00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.685928] ACPI: Dynamic OEM Table Load:
[    0.685931] ACPI: SSDT 0xFFFF9DA50D043C00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.687148] ACPI: Interpreter enabled
[    0.687162] ACPI: (supports S0 S3 S4 S5)
[    0.687163] ACPI: Using IOAPIC for interrupt routing
[    0.687184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.692064] ACPI: Power Resource [FN00] (off)
[    0.692128] ACPI: Power Resource [FN01] (off)
[    0.692192] ACPI: Power Resource [FN02] (off)
[    0.692255] ACPI: Power Resource [FN03] (off)
[    0.692317] ACPI: Power Resource [FN04] (off)
[    0.692760] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.693527] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.693793] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.694132] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.694287] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.694499] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.694645] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.694789] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.694932] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.695107] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.710411] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.726252] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.727587] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.742474] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.742513] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.742550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.742587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.742624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.742661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.742698] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.742735] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.742930] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.743093] PCI: Using ACPI for IRQ routing
[    0.751348] pnp: PnP ACPI init
[    0.751433] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.751502] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.751522] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.751564] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.751630] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.751673] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.751870] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.752042] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.752155] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.752170] pnp: PnP ACPI: found 9 devices
[    1.181670] ACPI: Thermal Zone [TZ00] (28 C)
[    1.181973] ACPI: Thermal Zone [TZ01] (30 C)
[    1.190433] ACPI: bus type USB registered
[    1.613964] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614154] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.614430] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614614] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.615360] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.615559] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.615848] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.616041] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.621716] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.621894] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.622167] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.622345] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
[    1.625691] ACPI Error:
[    1.625821] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.631520] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.631723] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
[    7.359177] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.359188] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.359191] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359195] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.359196] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.359201] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359205] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.395490] ACPI: Power Button [PWRB]
[    7.395544] ACPI: Power Button [PWRF]
[    8.231580] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
root@debian:/home/alain#



root@debian:/home/alain# dmesg |grep 'ACPI Error'


[    1.613964] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614154] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.614430] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.614614] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.615360] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.615559] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff9da50f4c0000), AE_NOT_FOUND (20160831/psparse-543)
[    1.615848] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.616041] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff9da50f4c0d70), AE_NOT_FOUND (20160831/psparse-543)
[    1.621716] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.621894] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.622167] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.622345] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
[    1.625691] ACPI Error:
[    1.625821] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff9da50f4c0c08), AE_NOT_FOUND (20160831/psparse-543)
[    1.631520] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.631723] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff9da50f4c07d0), AE_NOT_FOUND (20160831/psparse-543)
root@debian:/home/alain#


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#6 25-04-2017 10:27:34

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

root@debian:/home/alain# dmesg | grep 'ACPI Warning'


[    7.359177] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.359191] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359196] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.359201] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
root@debian:/home/alain#


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#7 25-04-2017 10:39:25

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

j'ai trouvé ceci :

https://forum.manjaro.org/t/acpi-error- … -4-9/12894

donc , apparemment , ceci est un problème mineur de ce kernel .
une petite régression .

donc , régression pour régression , pouvez vous me donner la commande pour downgrader mon kernel et le ramener en 3.16 ?

je crois que c'est une commande qui termine par "old quelquechose"

Dernière modification par Debian Alain (25-04-2017 10:47:12)


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#8 25-04-2017 11:11:18

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

connaissez vous ukuu  ?

https://korben.info/tag/downgrader-noyau-linux

apparemment spécifique à UBUNTU donc pas à DEBIAN jessie .

Dernière modification par Debian Alain (25-04-2017 11:19:43)


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#9 25-04-2017 11:57:34

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

que pensez vous de cette méthode et de ce kernel ?

https://computerz.solutions/kernel-4-debian-8/

apparemment , d'après cet article , tous les kernels 4.9 doivent upgrader en 4.10 :

http://news.softpedia.com/news/linux-ke … 5068.shtml

Dernière modification par Debian Alain (25-04-2017 12:10:05)


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#10 25-04-2017 12:14:05

chalu
Modératrice
Lieu : Anjou
Distrib. : Debian Stretch + backports
Noyau : Linux 4.9.0-8-amd64
(G)UI : Mate 1.20
Inscription : 11-03-2016

Re : [résolu] acpi error

Bonjour Debian Alain smile
Merci d'utiliser le bouton Modifier en bas de message pour éditer les messages au lieu de faire des posts multiples à la suite wink
voir les règles du forum

Hors ligne

#11 25-04-2017 12:22:04

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

quelqun peut il m'expliquer l'utilisation de menuconfig ?

à vrai dire , voilà la  question que je me pose :

si je sélectionne le menu acpi dans menuconfig , est ce que ça peut poser un(des) problème(s) ?

si oui , lequel (ou lesquels) ?

ou est ce que je passe à kernel 4.10.12 comme ça , sans rien toucher ?

pardon chalu , j'ai fait comme ça pour pas surcharger mes posts

j'ai téléchargé et décompacté  le kernel 4.10.12

sur https://www.kernel.org/

sans rien y toucher , https://computerz.solutions/kernel-4-debian-8/

me donne une erreur 2 à la ligne suivante :

make-kpkg --initrd --revision=1.CZS kernel_image kernel_headers --jobs 9



la compilation ayant foiré , je n'ai donc pas installé le kernel .

make-kpkg --initrd --revision=1.CZS kernel_image kernel_headers --jobs 9


install: impossible d'évaluer « REPORTING-BUGS »: Aucun fichier ou dossier de ce type
debian/ruleset/targets/headers.mk:40: recipe for target 'debian/stamp/install/linux-headers-4.10.12' failed
make[1]: *** [debian/stamp/install/linux-headers-4.10.12] Error 1
make[1]: Leaving directory '/kernel/linux-4.10.12'
debian/ruleset/local.mk:102: recipe for target 'kernel_headers' failed
make: *** [kernel_headers] Error 2
root@debian:/kernel/linux-4.10.12#

Dernière modification par Debian Alain (25-04-2017 14:06:14)


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#12 25-04-2017 21:05:30

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

je pense que j'ai trouvé une solution .

non pas LA solution mais UNE soluce

conformément à ce sujet : https://forums.fedora-fr.org/viewtopic.php?id=66185

j'ai mis ceci :

bonjour à toutes et à tous,
on peut essayer acpi=off sur la ligne GRUB_CMDLINE_LINUX_DEFAULT de grub
à la volée au boot dans un 1er temps
@+



du coup , grub ne m'affiche plus d'erreur acpi

root@debian:/home/alain# dmesg | grep 'ACPI'


[    0.000000] BIOS-e820: [mem 0x00000000cc962000-0x00000000cc972fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cc973000-0x00000000cca9afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd7fd000-0x00000000cd83ffff] ACPI NVS
[    0.304701] PM: Registering ACPI NVS region [mem 0xcc973000-0xcca9afff] (1212416 bytes)
[    0.304795] PM: Registering ACPI NVS region [mem 0xcd7fd000-0xcd83ffff] (274432 bytes)
[    0.342704] ACPI: Interpreter disabled.
[    0.387531] pnp: PnP ACPI: disabled


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#13 02-03-2018 15:37:38

Tristan07
Adhérent(e)
Distrib. : Debian 9, Stretch
Noyau : Linux 4.9.0-4-amd64
(G)UI : Gnome 3.22
Inscription : 21-05-2016
Site Web

Re : [résolu] acpi error

Salut,

Peux-tu donner des retours depuis cette méthode stp ?
J'aimerai éventuellement désactiver ceux'-ci également au boot de mes 2 ordis.

Une discussion à ce propos :
https://www.debian-fr.org/t/desactiver-acpi/24870

merci

Debian Stable est ce qui rend la vie plus intéressante que l'informatique ( voir Robert Filliou pour l'origine de cette citation smile
Debian c'est pas difficile ! zen.gif
https://lescahiersdudebutant.fr/
Pour une aide efficace sur le forum : https://debian-facile.org/viewtopic.php?id=13352

Hors ligne

#14 02-03-2018 15:53:20

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

ce post date , je pense , de mon ancienne config .

aujourd'hui , je n'ai que 2 erreurs d'acpi :

négligeable à côté de tout le paquet que j'ai eu , il y a quelque mois .

les erreurs d'acpi sont liées au bios et au kernel .

si les deux ne sont pas ou peu compatibles : erreurs d' acpi .

si tout va bien entre le bios et le kernel , plus d'erreur .

~$ sudo journalctl -r -p err



-- Logs begin at Fri 2018-03-02 14:01:26 CET, end at Fri 2018-03-02 14:50:11 CET. --
mars 02 14:11:08 Alain-PC-BUSTER kernel: amdgpu 0000:09:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
mars 02 14:11:05 Alain-PC-BUSTER kernel: ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170831/nsinit-426)
mars 02 14:11:05 Alain-PC-BUSTER kernel: ACPI Error: Needed [Integer/String/Buffer], found [Region] 00000000a0c0b2c7 (20170831/exresop-424)
 



c'est tout ce que j'ai comme erreurs maintenant , avec ma nouvelle config (voir signature) .

négligeable donc mais irrésolvable .


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#15 02-03-2018 18:14:43

Tristan07
Adhérent(e)
Distrib. : Debian 9, Stretch
Noyau : Linux 4.9.0-4-amd64
(G)UI : Gnome 3.22
Inscription : 21-05-2016
Site Web

Re : [résolu] acpi error

il me faut regarder de plus près, car ta commande ne me donne aucun acpi en erreur :

mars 02 17:09:58 debianmaison pulseaudio[1452]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error
mars 02 17:09:29 debianmaison /hpfax[1017]: [1017]: error: Failed to create /var/spool/cups/tmp/.hplip
mars 02 17:09:28 debianmaison colord-sane[758]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 02 17:09:28 debianmaison colord-sane[758]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 02 17:09:28 debianmaison colord-sane[758]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 02 17:09:28 debianmaison colord-sane[758]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 02 17:09:28 debianmaison colord-sane[758]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 02 17:09:28 debianmaison colord-sane[758]: io/hpmud/musb.c 2101: Invalid usb_open: Permission denied
mars 02 17:09:25 debianmaison gnome-session-binary[768]: Unrecoverable failure in required component org.gnome.Shell.desktop
mars 02 17:09:24 debianmaison avahi-daemon[691]: chroot.c: open() failed: No such file or directory
~


Je me suis tellement habitué à les voir au démarrage que je pensais qu'ils étaient toujours présents sur cet ordi. Je dois vérifier aussi avec le portable !
Je vais créer un post distinct pour plus de clarté, peut être est-ce préférable mais évidement seulement si j'ai les ACPI qui s’excitent au boot. big_smile
Merci Debian Alain

Dernière modification par Tristan07 (02-03-2018 18:15:11)


Debian Stable est ce qui rend la vie plus intéressante que l'informatique ( voir Robert Filliou pour l'origine de cette citation smile
Debian c'est pas difficile ! zen.gif
https://lescahiersdudebutant.fr/
Pour une aide efficace sur le forum : https://debian-facile.org/viewtopic.php?id=13352

Hors ligne

#16 02-03-2018 18:35:15

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

si je reprends  ma vieille commande :

# dmesg | grep 'ACPI'



[    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d373e000-0x00000000d375afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000da617000-0x00000000da620fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000da72c000-0x00000000daaecfff] ACPI NVS
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000D373E098 0000A4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000D3749B60 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
[    0.000000] ACPI: DSDT 0x00000000D373E1D0 00B98E (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DAAD5E00 000040
[    0.000000] ACPI: APIC 0x00000000D3749C78 0000DE (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000D3749D58 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000D3749DA0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000D3758CB8 001993 (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000D3749E98 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000D3752B30 002314 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000D3754E48 000F50 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000D3755D98 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000D3755DC8 002C39 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000D3758A08 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000D3758A48 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000D3758A80 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000D3758AA8 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: IVRS 0x00000000D3758AF0 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000D3758BC0 0000F8 (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.084860] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
[    0.084860] PM: Registering ACPI NVS region [mem 0xda72c000-0xdaaecfff] (3936256 bytes)
[    0.084860] ACPI: bus type PCI registered
[    0.084860] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.084860] ACPI: Added _OSI(Module Device)
[    0.084860] ACPI: Added _OSI(Processor Device)
[    0.084860] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084860] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084860] ACPI: Executed 2 blocks of module-level executable AML code
[    0.089577] ACPI Error: Needed [Integer/String/Buffer], found [Region] 0000000095e0ce21 (20170831/exresop-424)
[    0.089648] ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170831/nsinit-426)
[    0.092035] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.094112] ACPI: Interpreter enabled
[    0.094124] ACPI: (supports S0 S3 S4 S5)
[    0.094124] ACPI: Using IOAPIC for interrupt routing
[    0.094310] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.094521] ACPI: Enabled 4 GPEs in block 00 to 1F
[    0.098896] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.157249] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.157291] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.157325] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.157369] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.157408] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.157440] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.157472] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.157503] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.160141] PCI: Using ACPI for IRQ routing
[    0.170949] pnp: PnP ACPI init
[    0.171050] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.171100] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171158] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.171288] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171511] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.171699] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.172018] pnp: PnP ACPI: found 6 devices
[    0.623371] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.623463] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.623561] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.623710] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.623798] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.623919] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.624060] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.624177] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.624321] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.624455] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.624520] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.624711] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.624842] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.625038] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.625176] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.625347] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[    0.736533] ACPI: bus type USB registered
[    9.552427] ACPI: Power Button [PWRB]
[    9.552486] ACPI: Power Button [PWRF]
 



# journalctl -r -p err


-- Logs begin at Fri 2018-03-02 17:29:23 CET, end at Fri 2018-03-02 17:39:40 CET. --
mars 02 17:39:07 Alain-PC-BUSTER kernel: amdgpu 0000:09:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
mars 02 17:39:04 Alain-PC-BUSTER kernel: ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170831/nsinit-426)
mars 02 17:39:04 Alain-PC-BUSTER kernel: ACPI Error: Needed [Integer/String/Buffer], found [Region] 0000000095e0ce21 (20170831/exresop-424)
 



voilà ce que donne ma config actuelle . et apparemment , c'est irrésolvable .

Dernière modification par Debian Alain (02-03-2018 18:37:18)


1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

#17 02-03-2018 18:55:36

Tristan07
Adhérent(e)
Distrib. : Debian 9, Stretch
Noyau : Linux 4.9.0-4-amd64
(G)UI : Gnome 3.22
Inscription : 21-05-2016
Site Web

Re : [résolu] acpi error

Je suis une nouille.
Je n'ai plus de acpi error sur cet ordi. (vérifier en redémarrant également)

  0.000000] BIOS-e820: [mem 0x00000000dfe70000-0x00000000dfe87fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfe88000-0x00000000dfedbfff] ACPI NVS
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB920 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000DFE70000 000044 (v01 121410 RSDT1514 20101214 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DFE70200 000084 (v01 121410 FACP1514 20101214 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DFE704A0 00EF6A (v01 A1511  A1511001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000DFE88000 000040
[    0.000000] ACPI: APIC 0x00000000DFE70390 0000CC (v01 121410 APIC1514 20101214 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000DFE70460 00003C (v01 121410 OEMMCFG  20101214 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000DFE88040 000072 (v01 121410 OEMB1514 20101214 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DFE7F410 000038 (v01 121410 OEMHPET  20101214 MSFT 00000097)
[    0.000000] ACPI: ASPT 0x00000000DFE7F6B0 000034 (v06 121410 PerfTune 20101214 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000DFE7F6F0 0000B0 (v01 121410 OEMOSFR  20101214 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DFE897E0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000055] ACPI: Core revision 20160831
[    0.009755] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.303921] PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes)
[    0.329502] ACPI: bus type PCI registered
[    0.329504] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.345870] ACPI: Added _OSI(Module Device)
[    0.345871] ACPI: Added _OSI(Processor Device)
[    0.345872] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.345873] ACPI: Added _OSI(Processor Aggregator Device)
[    0.346060] ACPI: Executed 1 blocks of module-level executable AML code
[    0.354344] ACPI: Dynamic OEM Table Load:
[    0.354351] ACPI: SSDT 0xFFFF9D3695B0E000 001238 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.354653] ACPI: Dynamic OEM Table Load:
[    0.354657] ACPI: SSDT 0xFFFF9D3696DB0800 0004D5 (v01 PmRef  P001Cst  00003001 INTL 20060113)
[    0.355083] ACPI : EC: EC started
[    0.355083] ACPI : EC: interrupt blocked
[    0.355164] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.355165] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.355167] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.355167] ACPI: Interpreter enabled
[    0.355185] ACPI: (supports S0 S1 S3 S4 S5)
[    0.355186] ACPI: Using IOAPIC for interrupt routing
[    0.356270] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.356387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.362830] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.363580] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.364364] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.364672] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.364815] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.364958] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.365102] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.365249] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.365395] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.365546] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.365693] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.365872] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.365992] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.415282] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.415333] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.415380] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.415430] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.415479] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.415529] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.415579] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.415628] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.415673] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.415717] ACPI : EC: interrupt unblocked
[    0.415722] ACPI : EC: event unblocked
[    0.415727] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.415728] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.415860] PCI: Using ACPI for IRQ routing
[    0.417064] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.426368] pnp: PnP ACPI init
[    0.426449] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.426514] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.426701] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.426919] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.427030] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.427267] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.427375] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.427470] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.427645] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.427760] pnp: PnP ACPI: found 9 devices
[    0.850973] ACPI: bus type USB registered
[    3.020323] ACPI: Power Button [PWRB]
[    3.020365] ACPI: Power Button [PWRF]
[    3.064830] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20160831/utaddress-247)
[    3.064836] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.064839] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20160831/utaddress-247)
[    3.064842] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20160831/utaddress-247)
[    3.064845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.064845] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20160831/utaddress-247)
[    3.064848] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20160831/utaddress-247)
[    3.064850] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
 



Pas vu en tous cas.
Je mettrai à jour le Lenovo pour voir.

voilà ce que donne ma config actuelle . et apparemment , c'est irrésolvable .


Mais tu es sur Buster. Je suis sous Stretch, peut être une autre raison ?
merci !

Dernière modification par Tristan07 (02-03-2018 18:56:12)


Debian Stable est ce qui rend la vie plus intéressante que l'informatique ( voir Robert Filliou pour l'origine de cette citation smile
Debian c'est pas difficile ! zen.gif
https://lescahiersdudebutant.fr/
Pour une aide efficace sur le forum : https://debian-facile.org/viewtopic.php?id=13352

Hors ligne

#18 02-03-2018 19:06:14

Debian Alain
Adhérent(e)
Lieu : BREST
Distrib. : W$10 / stable / ubuntu / testing
Noyau : Linux 4.18.0-2-amd64 debian
(G)UI : Gnome wayland / Gdm3
Inscription : 11-03-2017

Re : [résolu] acpi error

sais pas . sous stretch , c'est kif - kif .

je crois que ça vient de la C.M. compatible w$ .

rien n'est donné pour linux donc peut être pas étonnant .

1498812139.jpg   Kendji Girac - Andalouse (Clip Officiel)
RYZEN7 1700X - PRIME X370 PRO - 16 Go DDR4 - RADEON PULSE RX 550 4GB DDR5 OC UEFI - CORSAIR RM750X - SSD crucial MX500 500GB

En ligne

Pied de page des forums