Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 31-05-2017 17:05:22

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : W$10 / stretch / ubuntu 17.04 / buster-sid
Noyau : Linux 4.13.0-0.bpo.1-amd64
(G)UI : Mate / Gdm3
Inscription : 11-03-2017

[clos] module de gestion de l ' acpi

bonjour ,

je cherche à assurer le bon fonctionnement de debian 8.8 avec kernel 4.9.3 avec l'acpi

en effet , depuis l'installation du kernel 4.9 , j'ai des problèmes avec l'acpi .

que je n'avais pas précédemment avec le kernel 3.16.4

# dmesg | grep 'ACPI'


[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.661816] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.688576] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.688747] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.688851] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.688851] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.777541] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
root@debian:/home/alain# dmesg | grep 'ACPI'
[    0.000000] BIOS-e820: [mem 0x00000000dd962000-0x00000000dd972fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dd973000-0x00000000dda9afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de7fd000-0x00000000de83ffff] ACPI NVS
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DD966080 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DD9710C8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DD966188 00AF3B (v02 ALASKA A M I    00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DDA99080 000040
[    0.000000] ACPI: APIC 0x00000000DD9711D8 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DD971270 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DD9712B8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DD9712F8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DD971330 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: BGRT 0x00000000DD972BC0 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DD9716F8 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DD9720A8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: DMAR 0x00000000DD972B40 000080 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000034] ACPI: Core revision 20160831
[    0.004667] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.632889] PM: Registering ACPI NVS region [mem 0xdd973000-0xdda9afff] (1212416 bytes)
[    0.632914] PM: Registering ACPI NVS region [mem 0xde7fd000-0xde83ffff] (274432 bytes)
[    0.661813] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.661814] ACPI: bus type PCI registered
[    0.661816] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.678096] ACPI: Added _OSI(Module Device)
[    0.678096] ACPI: Added _OSI(Processor Device)
[    0.678097] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.678097] ACPI: Added _OSI(Processor Aggregator Device)
[    0.678252] ACPI: Executed 1 blocks of module-level executable AML code
[    0.681237] ACPI: Dynamic OEM Table Load:
[    0.681242] ACPI: SSDT 0xFFFF90548C21F000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.681506] ACPI: Dynamic OEM Table Load:
[    0.681509] ACPI: SSDT 0xFFFF90548C276800 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.681709] ACPI: Dynamic OEM Table Load:
[    0.681712] ACPI: SSDT 0xFFFF90548C2C1000 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.682932] ACPI: Interpreter enabled
[    0.682947] ACPI: (supports S0 S3 S4 S5)
[    0.682947] ACPI: Using IOAPIC for interrupt routing
[    0.682968] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.687864] ACPI: Power Resource [FN00] (off)
[    0.687929] ACPI: Power Resource [FN01] (off)
[    0.687992] ACPI: Power Resource [FN02] (off)
[    0.688055] ACPI: Power Resource [FN03] (off)
[    0.688118] ACPI: Power Resource [FN04] (off)
[    0.688573] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.689350] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.689521] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.689859] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.690015] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.690159] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.690305] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.690450] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.690593] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.690736] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.690909] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.706169] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.722155] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.738049] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.739178] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.750115] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.762277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.762316] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.762354] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.762391] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.762428] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.762467] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.762505] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.762542] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.762736] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.762903] PCI: Using ACPI for IRQ routing
[    0.770958] pnp: PnP ACPI init
[    0.771047] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.771119] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.771139] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.771182] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.771252] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.771294] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.771489] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.771666] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.771755] pnp: PnP ACPI: found 8 devices
[    1.177195] ACPI: Power Button [PWRB]
[    1.177285] ACPI: Power Button [PWRF]
[    1.187051] ACPI: Thermal Zone [TZ00] (28 C)
[    1.187663] ACPI: Thermal Zone [TZ01] (30 C)
[    1.188123] ACPI: bus type USB registered
[    1.609835] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.610132] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff90548e0c0780), AE_NOT_FOUND (20160831/psparse-543)
[    1.611500] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.611795] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff90548e0c0780), AE_NOT_FOUND (20160831/psparse-543)
[    1.617474] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.617767] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff90548e0c0b68), AE_NOT_FOUND (20160831/psparse-543)
[    1.618186] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.618490] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff90548e0c0168), AE_NOT_FOUND (20160831/psparse-543)
[    1.619177] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.619470] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff90548e0c05f0), AE_NOT_FOUND (20160831/psparse-543)
[    1.627331] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.627640] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff90548e0c0b68), AE_NOT_FOUND (20160831/psparse-543)
[    1.628062] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.628370] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff90548e0c0168), AE_NOT_FOUND (20160831/psparse-543)
[    1.717969] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.718277] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff90548e0c05f0), AE_NOT_FOUND (20160831/psparse-543)
[   10.764829] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[   10.764833] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.764835] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.764837] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.764837] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.764839] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.764839] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   10.764841] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
 



j'ai téléchargé https://packages.debian.org/fr/jessie/a … t/download

j'espère que je fais pas de bêtise .

j'installe le fichier *.deb

$ sudo gdebi acpi-support_0.142-6_all.deb


[sudo] password for alain:
Reading package lists... Done
Building dependency tree        
Reading state information... Done
Building data structures... Done
Building data structures... Done

scripts for handling many ACPI events
 This package contains scripts to react to various ACPI events. It only
 includes scripts for events that can be supported with some level of
 safety cross platform.
 .
 It is able to:
  * Detect loss and gain of AC power, lid closure, and the press of a
    number of specific buttons (on Asus, IBM, Lenovo, Panasonic, Sony
    and Toshiba laptops).
  * Suspend, hibernate and resume the computer, with workarounds for
    hardware that needs it.
  * On some laptops, set screen brightness.
 .
 Besides some system tools acpi-support recommends vbetool to be able to power
 off the screen and some screensavers to be able to lock the screen on lid
 close.
Voulez-vous installer le paquet logiciel ? [o/N] :o
(Lecture de la base de données... 503416 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de acpi-support_0.142-6_all.deb ...
Dépaquetage de acpi-support (0.142-6) sur (0.142-6) ...
Paramétrage de acpi-support (0.142-6) ...
Traitement des actions différées (« triggers ») pour systemd (215-17+deb8u7) ...
 



on va voir :

zut  ! marche pas !

d'après https://forums.archlinux.fr/viewtopic.p … 76#p158276 serait corrigé dans le noyau 4.10
https://forums.archlinux.fr/viewtopic.php?t=18882

problème mineur , apparemment ; (très) agaçant mais mineur .

en tout cas , à première vue , non rectifié dans kernel 4.11.3

Dernière modification par Debian Alain (31-05-2017 17:22:56)


1498826560.jpg 1498812139.jpg Bip ! Bip !

Hors ligne

Pied de page des forums