Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 20-06-2017 22:51:08

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

[RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour,

nouveau sous linux, je viens d'installer sur mon ordinateur portable la Debian 9.0
A mon portable, j'ai branché en hdmi un écran LG que n'est pas reconnu.

J'ai fais différentes manipulations afin d'installer les driver "non-free" sans succès.

Qui a une idée afin que je puisse utiliser mon écran externe ?

Voici la conf de mon portable :
HP Pavilion 14-n206sf TouchSmart
Intel® CoreTM i7-4500U avec carte graphique Intel HD 4400
Carte graphique AMD Radeon HD 8670M
8 Go de mémoire SDRAM 1600 MHz DDR3L

Merci,
Michel

Dernière modification par neomitch (02-07-2017 14:22:28)

Hors ligne

#2 21-06-2017 00:10:20

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour

le retour de lspci pour confirmer qu une seule carte graphique


lspci
 


tu modifie ton sources.list comme ceci


#stretch
deb http://deb.debian.org/debian stretch main contrib non-free
deb http://security.debian.org/ stretch/updates main contrib non-free
deb http://deb.debian.org/debian stretch-updates main contrib non-free
deb http://deb.debian.org/debian stretch-backports main contrib non-free
 


mise a jour du cache


apt-get update
 


tu installe le firmware-amd-graphics


apt-get install firmware-amd-graphics
 



ça fonctionne très bien les gpu AMD en libre
pour ta carte c'est le paquet "xserver-xorg-video-radeon" qui doit etre déja installé

tout ceci dans le cas ou tu n'a qu un gpu , pas avec le duo intel + radeon


Vidéo
Carte graphique AMD Radeon HD 8670M (2 Go de mémoire DDR3 dédiée)
 



tu a sur le net un fichier =>  HP-321083955-c04061940.pdf  pour les carctéristiques

Dernière modification par robert2a (21-06-2017 00:22:19)

Hors ligne

#3 21-06-2017 10:17:23

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour Robert,

tout d'abord, merci pour ton aide.
Voici les résultats :

lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.1 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 2 (rev e4)
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
08:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 08)
0a:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430] (rev ff)



# nano /etc/apt/sources.list

deb [url]http://ftp.fr.debian.org/debian[/url] stretch main contrib non-free
deb [url]http://security.debian.org/[/url] stretch/updates main contrib non-free
deb [url]http://ftp.fr.debian.org/debian[/url] stretch-updates main contrib non-free
deb [url]http://ftp.fr.debian.org/debian[/url] stretch-backports main contrib non-free



root@debian:/home/stretch# apt-get update
Ign:1 [url]http://ftp.fr.debian.org/debian[/url] stretch InRelease
Atteint:2 [url]http://security.debian.org[/url] stretch/updates InRelease
Atteint:3 [url]http://ftp.fr.debian.org/debian[/url] stretch-updates InRelease
Atteint:4 [url]http://ftp.fr.debian.org/debian[/url] stretch-backports InRelease
Atteint:5 [url]http://ftp.fr.debian.org/debian[/url] stretch Release      
Lecture des listes de paquets... Fait                          
W: [url]http://security.debian.org/dists/stretch/updates/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch-updates/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch-backports/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch/Release.gpg[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.

Ign:1 [url]http://ftp.fr.debian.org/debian[/url] stretch InRelease
Atteint:2 [url]http://security.debian.org[/url] stretch/updates InRelease
Atteint:3 [url]http://ftp.fr.debian.org/debian[/url] stretch-updates InRelease
Atteint:4 [url]http://ftp.fr.debian.org/debian[/url] stretch-backports InRelease
Atteint:5 [url]http://ftp.fr.debian.org/debian[/url] stretch Release      
Lecture des listes de paquets... Fait                          
W: [url]http://security.debian.org/dists/stretch/updates/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch-updates/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch-backports/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch/Release.gpg[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.



root@debian:/home/stretch# apt-get update
Atteint:1 [url]http://security.debian.org[/url] stretch/updates InRelease
Ign:2 [url]http://ftp.fr.debian.org/debian[/url] stretch InRelease                      
Atteint:3 [url]http://ftp.fr.debian.org/debian[/url] stretch-updates InRelease          
Atteint:4 [url]http://ftp.fr.debian.org/debian[/url] stretch-backports InRelease        
Atteint:5 [url]http://ftp.fr.debian.org/debian[/url] stretch Release                    
Lecture des listes de paquets... Fait                                        
W: [url]http://security.debian.org/dists/stretch/updates/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch-updates/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch-backports/InRelease[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: [url]http://ftp.fr.debian.org/debian/dists/stretch/Release.gpg[/url]: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
 



root@debian:/home/stretch# apt-get install firmware-amd-graphics
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
firmware-amd-graphics is already the newest version (20161130-3).
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  ebtables firewalld ipset libipset3 python3-decorator python3-selinux
  python3-slip python3-slip-dbus
Veuillez utiliser « apt autoremove » pour les supprimer.
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
 



J'ai toujours le même problème.
Merci,

Michel

Dernière modification par neomitch (22-06-2017 14:02:17)

Hors ligne

#4 21-06-2017 13:35:44

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour

peut etre commencer a régler ce problème de "key"

j'ai mit le gestionnaire graphique de clé  voila pour stretch  => paquet "gui-apt-key"


Debian Stable Release Key (9/stretch)
Propriétaire: debian-release@lists.debian.org
ID de la clé: 0x1A7B6500
Cette clé est valable jusqu'au 1747592669
ID complète :EF0F 382A 1A7B 6500
Empreinte :
067E 3C45 6BAE 240A CEE8 8F6F EF0F 382A 1A7B 6500
 



il faudrait que apt-get update soit propre

la commande uname -a te renvoie quoi


uname -a
 




je vais laisser faire  les autres membres (pas mon truc les clés debian) , je reprends après pour le gpu wink

l'installation de debian 9 avec une clé usb ? pas de problème particulier pendant l'installation ?

Stretch  (debian 9) est a jour ?

ps : essaie d'utiliser les balises codes pour poster c'est plus joli et agréable a lire

le souci vient de la : (pour la video) tu a 2 gpu et je pense que tu fonctionne sur l intel a partir du bureau


00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)

0a:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430] (rev ff)
 



fait ses 2 commandes :


apt-get --reinstall install firmware-misc-nonfree xserver-xorg-video-intel
 




apt-get --reinstall install xserver-xorg-video-radeon
 



pour le gestionnaire avec deux gpu (intel + radeon)  je connais pas sur debian (pour portable )

tu utilise gnome comme bureau , il faudra peut etre regarder le log du serveur X

Dernière modification par robert2a (21-06-2017 13:46:34)

Hors ligne

#5 21-06-2017 14:06:42

èfpé
Membre
Inscription : 10-07-2016

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour,

Alors, pour ce qui concerne le souci des 'warnings' (avertissements) suivants :

apt-get update

W: http://machin: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.


Différentes stratégies possibles, mais pour aller au plus facile :

ls -l /etc/apt

suivi de

rm /etc/apt/trusted.gpg


Si le fichier trusted.gpg est effectivement présent dans ce répertoire.

Hors ligne

#6 21-06-2017 14:13:06

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

a priori pour moi il est présent


ls -l
 


retour


total 36
drwxr-xr-x 2 root root 4096 juin  19 19:38 apt.conf.d
drwxr-xr-x 2 root root 4096 févr.  5 00:07 listbugs
-rw-r--r-- 1 root root   99 janv. 15  2016 listchanges.conf
drwxr-xr-x 2 root root 4096 juin  10  2015 preferences.d
-rw-r--r-- 1 root root  720 juin  19 17:12 sources.list
-rw-r--r-- 1 root root    0 janv. 15  2016 sources.list~
drwxr-xr-x 2 root root 4096 juin  10  2015 sources.list.d
-rw------- 1 root root 1200 juin  21 13:26 trustdb.gpg
-rw------- 1 root root   32 juin  21 13:26 trusted.gpg
drwxr-xr-x 2 root root 4096 juin   6 10:03 trusted.gpg.d
 


l'erreur est du a quoi ?  (que je n'ai pas )

misère si je l'ai tongue   


apt-get update
 


retour


Atteint:1 http://security.debian.org stretch/updates InRelease
Atteint:2 http://security.debian.org buster/updates InRelease                                              
Ign:3 http://deb.debian.org/debian stretch InRelease                                                      
Atteint:4 http://deb.debian.org/debian stretch-updates InRelease
Atteint:5 http://deb.debian.org/debian stretch-backports InRelease
Atteint:6 http://deb.debian.org/debian buster InRelease        
Atteint:7 http://deb.debian.org/debian buster-updates InRelease
Atteint:8 http://deb.debian.org/debian sid InRelease          
Atteint:9 http://deb.debian.org/debian experimental InRelease  
Atteint:10 http://deb.debian.org/debian stretch Release        
Lecture des listes de paquets... Fait                        
W: http://security.debian.org/dists/stretch/updates/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://security.debian.org/dists/buster/updates/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://deb.debian.org/debian/dists/stretch-updates/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://deb.debian.org/debian/dists/stretch-backports/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://deb.debian.org/debian/dists/buster/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://deb.debian.org/debian/dists/buster-updates/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://deb.debian.org/debian/dists/sid/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://deb.debian.org/debian/dists/experimental/InRelease: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
W: http://deb.debian.org/debian/dists/stretch/Release.gpg: The key(s) in the keyring /etc/apt/trusted.gpg are ignored as the file is not readable by user '_apt' executing apt-key.
 



faut supprimer alors  tongue

PS: avec synaptic je la vois pas hmm

nota : avec la commande de  èfpé  , l'erreur n'existe plus

Dernière modification par robert2a (21-06-2017 14:20:59)

Hors ligne

#7 21-06-2017 15:05:58

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour,

j'ai installé Stretch à partir d'une clé USB sans problème.
J'utilise Gnome et Stretch est à jour.

En avril, j'avais essayé la dernière version Mint cinamon et là mon écran externe fonctionnait.
J'ai réessayé en multiboot avec mint et maintenant, l'écran externe ne fonctionne pas.

Voici les résultats des différentes manip

j'ai ajouté le paquet "gui-apt-key"

ensuite,

stretch@debian:~$ uname -a
Linux debian 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64 GNU/Linux
stretch@debian:~$



root@debian:/home/stretch# apt-get --reinstall install firmware-misc-nonfree xserver-xorg-video-intel
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
0 mis à jour, 0 nouvellement installés, 2installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 0 o/3 969 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
(Lecture de la base de données... 130395 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../firmware-misc-nonfree_20161130-3_all.deb ...
Dépaquetage de firmware-misc-nonfree (20161130-3) sur (20161130-3) ...
Préparation du dépaquetage de .../xserver-xorg-video-intel_2%3a2.99.917+git20161206-1_amd64.deb ...
Dépaquetage de xserver-xorg-video-intel (2:2.99.917+git20161206-1) sur (2:2.99.917+git20161206-1) ...
Paramétrage de xserver-xorg-video-intel (2:2.99.917+git20161206-1) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.24-11+deb9u1) ...
Paramétrage de firmware-misc-nonfree (20161130-3) ...
update-initramfs: deferring update (trigger activated)
Traitement des actions différées (« triggers ») pour man-db (2.7.6.1-2) ...
Traitement des actions différées (« triggers ») pour initramfs-tools (0.130) ...
update-initramfs: Generating /boot/initrd.img-4.9.0-3-amd64
root@debian:/home/stretch#



root@debian:/home/stretch# apt-get --reinstall install xserver-xorg-video-radeon
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
0 mis à jour, 0 nouvellement installés, 1installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 0 o/463 ko dans les archives.
Après cette opération, 0 o d'espace disque supplémentaires seront utilisés.
(Lecture de la base de données... 130395 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../xserver-xorg-video-radeon_1%3a7.8.0-1+b1_amd64.deb ...
Dépaquetage de xserver-xorg-video-radeon (1:7.8.0-1+b1) sur (1:7.8.0-1+b1) ...
Paramétrage de xserver-xorg-video-radeon (1:7.8.0-1+b1) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.6.1-2) ...
root@debian:/home/stretch#



stretch@debian:~$ ls -l /etc/apt
total 28
drwxr-xr-x 2 root root 4096 juin  21 08:40 apt.conf.d
-rw-r--r-- 1 root root  104 juin  18 21:18 listchanges.conf
drwxr-xr-x 2 root root 4096 juin   1 10:50 preferences.d
-rw-r--r-- 1 root root 1842 juin  20 15:36 sources.list
-rw-r--r-- 1 root root    0 juin  18 21:00 sources.list~
drwxr-xr-x 2 root root 4096 juin   1 10:50 sources.list.d
-rw-r--r-- 1 root root 1330 juin  20 15:26 sources.list.save
drwxr-xr-x 2 root root 4096 juin  18 21:00 trusted.gpg.d
stretch@debian:~$



root@debian:/home/stretch# rm /etc/apt/trusted.gpg
rm: impossible de supprimer '/etc/apt/trusted.gpg': Aucun fichier ou dossier de ce type
root@debian:/home/stretch#



root@debian:/home/stretch# apt-get update
Atteint:1 http://security.debian.org stretch/updates InRelease
Ign:2 http://ftp.fr.debian.org/debian stretch InRelease        
Atteint:3 http://ftp.fr.debian.org/debian stretch-updates InRelease
Atteint:4 http://ftp.fr.debian.org/debian stretch-backports InRelease        
Atteint:5 http://ftp.fr.debian.org/debian stretch Release                    
Lecture des listes de paquets... Fait                                        
root@debian:/home/stretch#

Hors ligne

#8 21-06-2017 15:29:32

Caribou22
Membre
Lieu : 22, Côtes d'Armor, Bretagne
Distrib. : Debian Stretch
Noyau : 4.9 amd64
(G)UI : XFCE
Inscription : 10-11-2014
Site Web

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour,
J'espère que ce n'est pas une impasse... Il me semble qu'il n'y a rien sous GNU/Linux pour gérer correctement les cartes graphiques hybrides Intel/AMD sad

Hors ligne

#9 21-06-2017 16:57:55

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

le souci du trusted.gpg est résolu
pour la partie vidéo , la je sais pas faire
a priori tu a les paquets installés pour intel et radéon   hmm  (firmware compris )
voir sur le net comment résoudre ce souci

tu peu poster ton log de X  => /var/log/Xorg.0.log


cat /var/log/Xorg.0.log
 



comme Caribou22 , je n'ai aucune idée de comment c'est géré sur Linux (déja avec nvidia c'est galère  hmm    )

nota : sur le net ils utilisent  "catalyst driver" du constructeur , mais sur stretch je sais pas si possible

Dernière modification par robert2a (21-06-2017 17:04:15)

Hors ligne

#10 21-06-2017 17:03:41

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Voici pour le log

stretch@debian:~$ cat /var/log/Xorg.0.log
cat: /var/log/Xorg.0.log: Aucun fichier ou dossier de ce type
stretch@debian:~$

Dernière modification par neomitch (21-06-2017 17:03:57)

Hors ligne

#11 21-06-2017 17:06:33

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Gnome commence a me fatiguer  tongue

regarde avec l explorateur de fichier dans /home/user/.local/share/xorg/Xorg.1.log

.local est un fichier caché , et user a remplacé par le nom de ton logging

Hors ligne

#12 21-06-2017 17:19:48

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Là, c'est pas Gnom mais mitch qui te fatigue ;-)
Je viens de faire une copie des logs ci-dessous à l'instant.


[    17.669] (--) Log file renamed from "/home/stretch/.local/share/xorg/Xorg.pid-815.log" to "/home/stretch/.local/share/xorg/Xorg.0.log"
[    17.670]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    17.670] X Protocol Version 11, Revision 0
[    17.670] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    17.670] Current Operating System: Linux debian 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64
[    17.670] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=6ba81f99-ad0b-4e40-8c2d-93c2cb114766 ro quiet
[    17.670] Build Date: 03 March 2017  03:14:41PM
[    17.670] xorg-server 2:1.19.2-1 ([url]https://www.debian.org/support[/url])
[    17.670] Current version of pixman: 0.34.0
[    17.670]  Before reporting problems, check [url]http://wiki.x.org[/url]
  to make sure that you have the latest version.
[    17.670] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.670] (==) Log file: "/home/stretch/.local/share/xorg/Xorg.0.log", Time: Wed Jun 21 15:12:40 2017
[    17.671] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.672] (==) No Layout section.  Using the first Screen section.
[    17.672] (==) No screen section available. Using defaults.
[    17.672] (**) |-->Screen "Default Screen Section" (0)
[    17.672] (**) |   |-->Monitor "<default monitor>"
[    17.673] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    17.673] (==) Automatically adding devices
[    17.673] (==) Automatically enabling devices
[    17.673] (==) Automatically adding GPU devices
[    17.673] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    17.673] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.673]  Entry deleted from font path.
[    17.673] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    17.673] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.673] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.673] (II) Loader magic: 0x56367cb8fe00
[    17.673] (II) Module ABI versions:
[    17.673]  X.Org ANSI C Emulation: 0.4
[    17.673]  X.Org Video Driver: 23.0
[    17.673]  X.Org XInput driver : 24.1
[    17.673]  X.Org Server Extension : 10.0
[    17.674] (++) using VT number 2

[    17.677] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    17.677] (II) xfree86: Adding drm device (/dev/dri/card0)
[    17.677] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    17.678] (II) xfree86: Adding drm device (/dev/dri/card1)
[    17.678] (EE) systemd-logind: failed to take device /dev/dri/card1: Invalid argument
[    18.187] (--) PCI:*(0:0:2:0) 8086:0a16:103c:2162 rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[    18.187] (II) LoadModule: "glx"
[    18.232] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.245] (II) Module glx: vendor="X.Org Foundation"
[    18.245]  compiled for 1.19.2, module version = 1.0.0
[    18.245]  ABI class: X.Org Server Extension, version 10.0
[    18.245] (==) Matched modesetting as autoconfigured driver 0
[    18.245] (==) Matched fbdev as autoconfigured driver 1
[    18.245] (==) Matched vesa as autoconfigured driver 2
[    18.245] (==) Assigned the driver to the xf86ConfigLayout
[    18.245] (II) LoadModule: "modesetting"
[    18.257] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.258] (II) Module modesetting: vendor="X.Org Foundation"
[    18.258]  compiled for 1.19.2, module version = 1.19.2
[    18.258]  Module class: X.Org Video Driver
[    18.258]  ABI class: X.Org Video Driver, version 23.0
[    18.258] (II) LoadModule: "fbdev"
[    18.258] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    18.259] (II) Module fbdev: vendor="X.Org Foundation"
[    18.259]  compiled for 1.19.0, module version = 0.4.4
[    18.259]  Module class: X.Org Video Driver
[    18.259]  ABI class: X.Org Video Driver, version 23.0
[    18.259] (II) LoadModule: "vesa"
[    18.259] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.260] (II) Module vesa: vendor="X.Org Foundation"
[    18.260]  compiled for 1.19.0, module version = 2.3.4
[    18.260]  Module class: X.Org Video Driver
[    18.260]  ABI class: X.Org Video Driver, version 23.0
[    18.260] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.260] (II) FBDEV: driver for framebuffer: fbdev
[    18.260] (II) VESA: driver for VESA chipsets: vesa
[    18.260] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    18.260] (II) modeset(0): using drv /dev/dri/card0
[    18.260] (WW) Falling back to old probe method for fbdev
[    18.260] (II) Loading sub module "fbdevhw"
[    18.260] (II) LoadModule: "fbdevhw"
[    18.260] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    18.260] (II) Module fbdevhw: vendor="X.Org Foundation"
[    18.260]  compiled for 1.19.2, module version = 0.0.2
[    18.260]  ABI class: X.Org Video Driver, version 23.0
[    18.260] (WW) Falling back to old probe method for vesa
[    18.261] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    18.261] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    18.261] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    18.261] (==) modeset(0): RGB weight 888
[    18.261] (==) modeset(0): Default visual is TrueColor
[    18.261] (II) Loading sub module "glamoregl"
[    18.261] (II) LoadModule: "glamoregl"
[    18.261] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    18.265] (II) Module glamoregl: vendor="X.Org Foundation"
[    18.265]  compiled for 1.19.2, module version = 1.0.0
[    18.265]  ABI class: X.Org ANSI C Emulation, version 0.4
[    18.265] (II) glamor: OpenGL accelerated X.org driver based.
[    18.272] (II) glamor: EGL version 1.4 (DRI2):
[    18.273] (II) modeset(0): glamor initialized
[    18.276] (II) modeset(0): Output eDP-1 has no monitor section
[    18.278] (II) modeset(0): EDID for output eDP-1
[    18.278] (II) modeset(0): Manufacturer: AUO  Model: 103c  Serial#: 0
[    18.278] (II) modeset(0): Year: 2012  Week: 0
[    18.278] (II) modeset(0): EDID Version: 1.4
[    18.278] (II) modeset(0): Digital Display Input
[    18.278] (II) modeset(0): 6 bits per channel
[    18.278] (II) modeset(0): Digital interface is undefined
[    18.278] (II) modeset(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    18.278] (II) modeset(0): Gamma: 2.20
[    18.278] (II) modeset(0): No DPMS capabilities specified
[    18.278] (II) modeset(0): Supported color encodings: RGB 4:4:4
[    18.278] (II) modeset(0): First detailed timing is preferred mode
[    18.278] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    18.278] (II) modeset(0): redX: 0.590 redY: 0.345   greenX: 0.340 greenY: 0.570
[    18.279] (II) modeset(0): blueX: 0.150 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[    18.279] (II) modeset(0): Manufacturer's mask: 0
[    18.279] (II) modeset(0): Supported detailed timing:
[    18.279] (II) modeset(0): clock: 76.3 MHz   Image Size:  309 x 173 mm
[    18.279] (II) modeset(0): h_active: 1366  h_sync: 1382  h_sync_end 1398 h_blank_end 1576 h_border: 0
[    18.279] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 785 v_blanking: 806 v_border: 0
[    18.279] (II) modeset(0): Supported detailed timing:
[    18.279] (II) modeset(0): clock: 50.9 MHz   Image Size:  309 x 173 mm
[    18.279] (II) modeset(0): h_active: 1366  h_sync: 1382  h_sync_end 1398 h_blank_end 1576 h_border: 0
[    18.279] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 785 v_blanking: 806 v_border: 0
[    18.279] (II) modeset(0): Unknown vendor-specific block 2
[    18.279] (II) modeset(0): EDID (in hex):
[    18.279] (II) modeset(0):   00ffffffffffff0006af3c1000000000
[    18.279] (II) modeset(0):   00160104901f11780210b59758579226
[    18.279] (II) modeset(0):   1e505400000001010101010101010101
[    18.279] (II) modeset(0):   010101010101ce1d56d2500026301010
[    18.279] (II) modeset(0):   3e0035ad10000018df1356d250002630
[    18.279] (II) modeset(0):   10103e0035ad10000018000000000000
[    18.279] (II) modeset(0):   00000000000000000000000000000002
[    18.279] (II) modeset(0):   000c39cc0d3c640f0c1b6f202020000d
[    18.279] (II) modeset(0): Printing probed modes for output eDP-1
[    18.279] (II) modeset(0): Modeline "1366x768"x60.1   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[    18.279] (II) modeset(0): Modeline "1366x768"x40.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[    18.279] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    18.279] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    18.279] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    18.279] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    18.279] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    18.279] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    18.279] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    18.279] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    18.279] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    18.279] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    18.279] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    18.279] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    18.279] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    18.279] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    18.279] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    18.279] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    18.279] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    18.279] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    18.279] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    18.279] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    18.279] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    18.279] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    18.279] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    18.279] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    18.279] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    18.279] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    18.279] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    18.279] (II) modeset(0): Output eDP-1 connected
[    18.279] (II) modeset(0): Using exact sizes for initial modes
[    18.279] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[    18.279] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    18.279] (==) modeset(0): DPI set to (96, 96)
[    18.279] (II) Loading sub module "fb"
[    18.279] (II) LoadModule: "fb"
[    18.279] (II) Loading /usr/lib/xorg/modules/libfb.so
[    18.281] (II) Module fb: vendor="X.Org Foundation"
[    18.281]  compiled for 1.19.2, module version = 1.0.0
[    18.281]  ABI class: X.Org ANSI C Emulation, version 0.4
[    18.281] (II) UnloadModule: "fbdev"
[    18.281] (II) Unloading fbdev
[    18.281] (II) UnloadSubModule: "fbdevhw"
[    18.281] (II) Unloading fbdevhw
[    18.281] (II) UnloadModule: "vesa"
[    18.281] (II) Unloading vesa
[    18.281] (==) Depth 24 pixmap format is 32 bpp
[    18.361] (==) modeset(0): Backing store enabled
[    18.361] (==) modeset(0): Silken mouse enabled
[    18.361] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.362] (==) modeset(0): DPMS enabled
[    18.362] (II) modeset(0): [DRI2] Setup complete
[    18.362] (II) modeset(0): [DRI2]   DRI driver: i965
[    18.362] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    18.362] (--) RandR disabled
[    18.365] (II) SELinux: Disabled on system
[    18.369] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    18.369] (II) AIGLX: enabled GLX_ARB_create_context
[    18.369] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    18.369] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    18.370] (II) AIGLX: enabled GLX_INTEL_swap_event
[    18.370] (II) AIGLX: enabled GLX_SGI_swap_control
[    18.370] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    18.370] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    18.370] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    18.370] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    18.370] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    18.370] (II) AIGLX: Loaded and initialized i965
[    18.370] (II) GLX: Initialized DRI2 GL provider for screen 0
[    18.371] (II) modeset(0): Damage tracking initialized
[    18.371] (II) modeset(0): Setting screen physical size to 361 x 203
[    18.399] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    18.399] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.399] (II) LoadModule: "libinput"
[    18.402] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    18.465] (II) Module libinput: vendor="X.Org Foundation"
[    18.465]  compiled for 1.19.0, module version = 0.23.0
[    18.465]  Module class: X.Org XInput Driver
[    18.465]  ABI class: X.Org XInput driver, version 24.1
[    18.465] (II) Using input driver 'libinput' for 'Power Button'
[    18.466] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[    18.466] (**) Power Button: always reports core events
[    18.466] (**) Option "Device" "/dev/input/event5"
[    18.466] (**) Option "_source" "server/udev"
[    18.467] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    18.467] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    18.467] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    18.467] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.467] (**) Option "xkb_model" "pc105"
[    18.467] (**) Option "xkb_layout" "fr"
[    18.467] (**) Option "xkb_variant" "latin9"
[    18.481] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    18.481] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    18.481] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    18.481] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    18.481] (II) Using input driver 'libinput' for 'Video Bus'
[    18.481] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 24 paused 0
[    18.481] (**) Video Bus: always reports core events
[    18.481] (**) Option "Device" "/dev/input/event9"
[    18.481] (**) Option "_source" "server/udev"
[    18.482] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[    18.482] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[    18.482] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[    18.482] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.482] (**) Option "xkb_model" "pc105"
[    18.482] (**) Option "xkb_layout" "fr"
[    18.482] (**) Option "xkb_variant" "latin9"
[    18.482] (II) input device 'Video Bus', /dev/input/event9 is tagged by udev as: Keyboard
[    18.482] (II) input device 'Video Bus', /dev/input/event9 is a keyboard
[    18.482] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    18.482] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    18.482] (II) Using input driver 'libinput' for 'Video Bus'
[    18.483] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 25 paused 0
[    18.483] (**) Video Bus: always reports core events
[    18.483] (**) Option "Device" "/dev/input/event8"
[    18.483] (**) Option "_source" "server/udev"
[    18.483] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    18.483] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    18.483] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input9/event8"
[    18.483] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    18.483] (**) Option "xkb_model" "pc105"
[    18.483] (**) Option "xkb_layout" "fr"
[    18.483] (**) Option "xkb_variant" "latin9"
[    18.483] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    18.483] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    18.484] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    18.484] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.484] (II) Using input driver 'libinput' for 'Power Button'
[    18.484] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[    18.484] (**) Power Button: always reports core events
[    18.484] (**) Option "Device" "/dev/input/event4"
[    18.484] (**) Option "_source" "server/udev"
[    18.484] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    18.484] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    18.484] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[    18.484] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    18.484] (**) Option "xkb_model" "pc105"
[    18.484] (**) Option "xkb_layout" "fr"
[    18.484] (**) Option "xkb_variant" "latin9"
[    18.485] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    18.485] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    18.485] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    18.485] (II) No input driver specified, ignoring this device.
[    18.485] (II) This device may have been added with another device file.
[    18.485] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[    18.485] (II) No input driver specified, ignoring this device.
[    18.485] (II) This device may have been added with another device file.
[    18.485] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event17)
[    18.485] (II) No input driver specified, ignoring this device.
[    18.485] (II) This device may have been added with another device file.
[    18.486] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event18)
[    18.486] (II) No input driver specified, ignoring this device.
[    18.486] (II) This device may have been added with another device file.
[    18.486] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event13)
[    18.486] (**) HP Truevision HD: Applying InputClass "libinput keyboard catchall"
[    18.486] (II) Using input driver 'libinput' for 'HP Truevision HD'
[    18.486] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 27 paused 0
[    18.486] (**) HP Truevision HD: always reports core events
[    18.486] (**) Option "Device" "/dev/input/event13"
[    18.486] (**) Option "_source" "server/udev"
[    18.486] (II) input device 'HP Truevision HD', /dev/input/event13 is tagged by udev as: Keyboard
[    18.487] (II) input device 'HP Truevision HD', /dev/input/event13 is a keyboard
[    18.487] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input14/event13"
[    18.487] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 10)
[    18.487] (**) Option "xkb_model" "pc105"
[    18.487] (**) Option "xkb_layout" "fr"
[    18.487] (**) Option "xkb_variant" "latin9"
[    18.487] (II) input device 'HP Truevision HD', /dev/input/event13 is tagged by udev as: Keyboard
[    18.487] (II) input device 'HP Truevision HD', /dev/input/event13 is a keyboard
[    18.487] (II) config/udev: Adding input device Logitech K270 (/dev/input/event19)
[    18.487] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    18.487] (II) Using input driver 'libinput' for 'Logitech K270'
[    18.488] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 28 paused 0
[    18.488] (**) Logitech K270: always reports core events
[    18.488] (**) Option "Device" "/dev/input/event19"
[    18.488] (**) Option "_source" "server/udev"
[    18.488] (II) input device 'Logitech K270', /dev/input/event19 is tagged by udev as: Keyboard
[    18.488] (II) input device 'Logitech K270', /dev/input/event19 is a keyboard
[    18.488] (II) libinput: Logitech K270: needs a virtual subdevice
[    18.488] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.2/0003:046D:C52B.0003/0003:046D:4003.0006/input/input21/event19"
[    18.488] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 11)
[    18.488] (**) Option "AccelerationScheme" "none"
[    18.488] (**) Logitech K270: (accel) selected scheme none/0
[    18.488] (**) Logitech K270: (accel) acceleration factor: 2.000
[    18.488] (**) Logitech K270: (accel) acceleration threshold: 4
[    18.489] (II) input device 'Logitech K270', /dev/input/event19 is tagged by udev as: Keyboard
[    18.489] (II) input device 'Logitech K270', /dev/input/event19 is a keyboard
[    18.489] (II) config/udev: Adding input device Logitech M185 (/dev/input/event15)
[    18.489] (**) Logitech M185: Applying InputClass "libinput pointer catchall"
[    18.489] (II) Using input driver 'libinput' for 'Logitech M185'
[    18.489] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 29 paused 0
[    18.489] (**) Logitech M185: always reports core events
[    18.489] (**) Option "Device" "/dev/input/event15"
[    18.489] (**) Option "_source" "server/udev"
[    18.490] (II) input device 'Logitech M185', /dev/input/event15 is tagged by udev as: Mouse
[    18.490] (II) Device 'Logitech M185' set to 800 DPI
[    18.490] (II) input device 'Logitech M185', /dev/input/event15 is a pointer caps
[    18.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.2/0003:046D:C52B.0003/0003:046D:4008.0005/input/input17/event15"
[    18.490] (II) XINPUT: Adding extended input device "Logitech M185" (type: MOUSE, id 12)
[    18.490] (**) Option "AccelerationScheme" "none"
[    18.490] (**) Logitech M185: (accel) selected scheme none/0
[    18.490] (**) Logitech M185: (accel) acceleration factor: 2.000
[    18.490] (**) Logitech M185: (accel) acceleration threshold: 4
[    18.490] (II) input device 'Logitech M185', /dev/input/event15 is tagged by udev as: Mouse
[    18.490] (II) Device 'Logitech M185' set to 800 DPI
[    18.490] (II) input device 'Logitech M185', /dev/input/event15 is a pointer caps
[    18.491] (II) config/udev: Adding input device Logitech M185 (/dev/input/mouse2)
[    18.491] (II) No input driver specified, ignoring this device.
[    18.491] (II) This device may have been added with another device file.
[    18.491] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01 (/dev/input/event14)
[    18.491] (**) eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01: Applying InputClass "libinput touchscreen catchall"
[    18.491] (II) Using input driver 'libinput' for 'eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01'
[    18.548] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 30 paused 0
[    18.548] (**) eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01: always reports core events
[    18.548] (**) Option "Device" "/dev/input/event14"
[    18.548] (**) Option "_source" "server/udev"
[    18.548] (II) input device 'eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01', /dev/input/event14 is tagged by udev as: Touchscreen
[    18.548] (II) input device 'eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01', /dev/input/event14 is a touch device
[    18.548] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/0003:0EEF:A107.0004/input/input15/event14"
[    18.548] (II) XINPUT: Adding extended input device "eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01" (type: TOUCHSCREEN, id 13)
[    18.549] (**) Option "AccelerationScheme" "none"
[    18.549] (**) eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01: (accel) selected scheme none/0
[    18.549] (**) eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01: (accel) acceleration factor: 2.000
[    18.549] (**) eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01: (accel) acceleration threshold: 4
[    18.549] (II) input device 'eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01', /dev/input/event14 is tagged by udev as: Touchscreen
[    18.549] (II) input device 'eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01', /dev/input/event14 is a touch device
[    18.549] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01 (/dev/input/mouse1)
[    18.549] (II) No input driver specified, ignoring this device.
[    18.549] (II) This device may have been added with another device file.
[    18.550] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    18.550] (II) No input driver specified, ignoring this device.
[    18.550] (II) This device may have been added with another device file.
[    18.550] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    18.550] (II) No input driver specified, ignoring this device.
[    18.550] (II) This device may have been added with another device file.
[    18.550] (II) config/udev: Adding drm device (/dev/dri/card1)
[    18.550] (II) xfree86: Adding drm device (/dev/dri/card1)
[    19.355] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 31 paused 0
[    19.355] (II) LoadModule: "modesetting"
[    19.355] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    19.355] (II) Module modesetting: vendor="X.Org Foundation"
[    19.355]  compiled for 1.19.2, module version = 1.19.2
[    19.355]  Module class: X.Org Video Driver
[    19.355]  ABI class: X.Org Video Driver, version 23.0
[    19.355] (II) UnloadModule: "modesetting"
[    19.355] (II) Unloading modesetting
[    19.355] (II) Failed to load module "modesetting" (already loaded, 0)
[    19.355] (II) modeset(G0): using drv /dev/dri/card1
[    19.355] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    19.355] (==) modeset(G0): RGB weight 888
[    19.355] (==) modeset(G0): Default visual is TrueColor
[    19.355] (II) Loading sub module "glamoregl"
[    19.355] (II) LoadModule: "glamoregl"
[    19.355] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    19.355] (II) Module glamoregl: vendor="X.Org Foundation"
[    19.355]  compiled for 1.19.2, module version = 1.0.0
[    19.355]  ABI class: X.Org ANSI C Emulation, version 0.4
[    19.355] (II) glamor: OpenGL accelerated X.org driver based.
[    19.456] (II) glamor: EGL version 1.4 (DRI2):
[    19.465] (II) modeset(G0): glamor initialized
[    19.465] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    19.465] (==) modeset(G0): DPI set to (96, 96)
[    19.465] (II) Loading sub module "fb"
[    19.465] (II) LoadModule: "fb"
[    19.465] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.465] (II) Module fb: vendor="X.Org Foundation"
[    19.465]  compiled for 1.19.2, module version = 1.0.0
[    19.465]  ABI class: X.Org ANSI C Emulation, version 0.4
[    19.626] (==) modeset(G0): Backing store enabled
[    19.626] (==) modeset(G0): Silken mouse enabled
[    19.626] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.626] (==) modeset(G0): DPMS enabled
[    19.626] (II) modeset(G0): [DRI2] Setup complete
[    19.626] (II) modeset(G0): [DRI2]   DRI driver: radeon
[    19.626] (II) modeset(G0): [DRI2]   VDPAU driver: radeon
[    19.633] (II) modeset(G0): Damage tracking initialized
[    19.633] xf86: found device 2
[    19.634] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    19.634] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    19.634] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    19.634] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 36 paused 0
[    19.634] (**) AT Translated Set 2 keyboard: always reports core events
[    19.634] (**) Option "Device" "/dev/input/event0"
[    19.634] (**) Option "_source" "server/udev"
[    19.635] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    19.635] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    19.635] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    19.635] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    19.635] (**) Option "xkb_model" "pc105"
[    19.635] (**) Option "xkb_layout" "fr"
[    19.635] (**) Option "xkb_variant" "latin9"
[    19.635] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    19.635] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    19.635] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event1)
[    19.635] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "libinput touchpad catchall"
[    19.635] (II) Using input driver 'libinput' for 'AlpsPS/2 ALPS GlidePoint'
[    19.636] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 37 paused 0
[    19.636] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    19.636] (**) Option "Device" "/dev/input/event1"
[    19.636] (**) Option "_source" "server/udev"
[    19.636] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event1 is tagged by udev as: Touchpad
[    19.636] (II) AlpsPS/2 ALPS GlidePoint: no resolution or size hints, assuming a size of 69x50mm
[    19.636] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event1 is a touchpad
[    19.636] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    19.636] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 15)
[    19.636] (**) Option "AccelerationScheme" "none"
[    19.636] (**) AlpsPS/2 ALPS GlidePoint: (accel) selected scheme none/0
[    19.636] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    19.636] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    19.636] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event1 is tagged by udev as: Touchpad
[    19.636] (II) AlpsPS/2 ALPS GlidePoint: no resolution or size hints, assuming a size of 69x50mm
[    19.637] (II) input device 'AlpsPS/2 ALPS GlidePoint', /dev/input/event1 is a touchpad
[    19.637] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse0)
[    19.637] (II) No input driver specified, ignoring this device.
[    19.637] (II) This device may have been added with another device file.
[    19.637] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[    19.637] (II) No input driver specified, ignoring this device.
[    19.637] (II) This device may have been added with another device file.
[    19.637] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    19.637] (II) No input driver specified, ignoring this device.
[    19.637] (II) This device may have been added with another device file.
[    19.637] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    19.637] (II) No input driver specified, ignoring this device.
[    19.637] (II) This device may have been added with another device file.
[    19.638] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event10)
[    19.638] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    19.638] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    19.638] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 38 paused 0
[    19.638] (**) HP WMI hotkeys: always reports core events
[    19.638] (**) Option "Device" "/dev/input/event10"
[    19.638] (**) Option "_source" "server/udev"
[    19.638] (II) input device 'HP WMI hotkeys', /dev/input/event10 is tagged by udev as: Keyboard
[    19.638] (II) input device 'HP WMI hotkeys', /dev/input/event10 is a keyboard
[    19.638] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[    19.638] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 16)
[    19.638] (**) Option "xkb_model" "pc105"
[    19.638] (**) Option "xkb_layout" "fr"
[    19.638] (**) Option "xkb_variant" "latin9"
[    19.639] (II) input device 'HP WMI hotkeys', /dev/input/event10 is tagged by udev as: Keyboard
[    19.639] (II) input device 'HP WMI hotkeys', /dev/input/event10 is a keyboard
[    19.639] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event2)
[    19.639] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    19.639] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[    19.639] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 39 paused 0
[    19.639] (**) HP Wireless hotkeys: always reports core events
[    19.639] (**) Option "Device" "/dev/input/event2"
[    19.639] (**) Option "_source" "server/udev"
[    19.639] (II) input device 'HP Wireless hotkeys', /dev/input/event2 is tagged by udev as: Keyboard
[    19.639] (II) input device 'HP Wireless hotkeys', /dev/input/event2 is a keyboard
[    19.639] (**) Option "config_info" "udev:/sys/devices/virtual/input/input3/event2"
[    19.639] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 17)
[    19.639] (**) Option "xkb_model" "pc105"
[    19.639] (**) Option "xkb_layout" "fr"
[    19.639] (**) Option "xkb_variant" "latin9"
[    19.640] (II) input device 'HP Wireless hotkeys', /dev/input/event2 is tagged by udev as: Keyboard
[    19.640] (II) input device 'HP Wireless hotkeys', /dev/input/event2 is a keyboard
[    19.642] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    19.642] (II) Using input driver 'libinput' for 'Logitech K270'
[    19.642] (II) systemd-logind: returning pre-existing fd for /dev/input/event19 13:83
[    19.642] (**) Logitech K270: always reports core events
[    19.642] (**) Option "Device" "/dev/input/event19"
[    19.642] (**) Option "_source" "_driver/libinput"
[    19.642] (II) libinput: Logitech K270: is a virtual subdevice
[    19.642] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.2/0003:046D:C52B.0003/0003:046D:4003.0006/input/input21/event19"
[    19.642] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 18)
[    19.642] (**) Option "xkb_model" "pc105"
[    19.642] (**) Option "xkb_layout" "fr"
[    19.642] (**) Option "xkb_variant" "latin9"
[    20.146] (II) modeset(0): EDID vendor "AUO", prod id 4156
[    20.146] (II) modeset(0): Printing DDC gathered Modelines:
[    20.146] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[    20.146] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[    22.129] (II) modeset(0): EDID vendor "AUO", prod id 4156
[    22.129] (II) modeset(0): Printing DDC gathered Modelines:
[    22.129] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[    22.129] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[    29.562] (II) modeset(0): EDID vendor "AUO", prod id 4156
[    29.562] (II) modeset(0): Printing DDC gathered Modelines:
[    29.562] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[    29.562] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[    99.422] (II) modeset(0): EDID vendor "AUO", prod id 4156
[    99.422] (II) modeset(0): Printing DDC gathered Modelines:
[    99.422] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[    99.422] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[   204.085] (II) modeset(0): EDID vendor "AUO", prod id 4156
[   204.085] (II) modeset(0): Printing DDC gathered Modelines:
[   204.085] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[   204.085] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[  1610.058] (**) Option "fd" "30"
[  4435.773] (II) input device 'eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01', /dev/input/event14 is tagged by udev as: Touchscreen
[  4435.773] (II) input device 'eGalax Inc. eGalaxTouch EXC7910-1018-13.00.01', /dev/input/event14 is a touch device
[  6192.697] (II) modeset(0): EDID vendor "AUO", prod id 4156
[  6192.697] (II) modeset(0): Printing DDC gathered Modelines:
[  6192.697] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[  6192.697] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[  6959.364] (II) modeset(0): EDID vendor "AUO", prod id 4156
[  6959.364] (II) modeset(0): Printing DDC gathered Modelines:
[  6959.364] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[  6959.364] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[  6959.368] (II) modeset(0): EDID vendor "AUO", prod id 4156
[  6959.368] (II) modeset(0): Printing DDC gathered Modelines:
[  6959.368] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[  6959.368] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)
[  7266.411] (II) modeset(0): EDID vendor "AUO", prod id 4156
[  7266.411] (II) modeset(0): Printing DDC gathered Modelines:
[  7266.411] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (48.4 kHz eP)
[  7266.411] (II) modeset(0): Modeline "1366x768"x0.0   50.87  1366 1382 1398 1576  768 771 785 806 -hsync -vsync (32.3 kHz e)

Dernière modification par neomitch (21-06-2017 18:06:30)

Hors ligne

#13 21-06-2017 17:57:26

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

tongue  tu peut activer un ascenseur pour le log , tu le place entre balises [ code ]  et [ /code ]   (pas d'espace entre [ et code (ou /code) et meme chose pour ]  )

je regarde tout ça  wink

c'est bien le log d'aujourd'hui


[    17.670] (==) Log file: "/home/stretch/.local/share/xorg/Xorg.0.log", Time: Wed Jun 21 15:12:40 2017
 



la carte 0 , intel


[    17.677] (II) xfree86: Adding drm device (/dev/dri/card0)
 



ta carte intel est fonctionnelle


[    18.281] (==) Depth 24 pixmap format is 32 bpp
[    18.361] (==) modeset(0): Backing store enabled
[    18.361] (==) modeset(0): Silken mouse enabled
[    18.361] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.362] (==) modeset(0): DPMS enabled
[    18.362] (II) modeset(0): [DRI2] Setup complete
[    18.362] (II) modeset(0): [DRI2]   DRI driver: i965
[    18.362] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    18.362] (--) RandR disabled
[    18.365] (II) SELinux: Disabled on system
[    18.369] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    18.369] (II) AIGLX: enabled GLX_ARB_create_context
[    18.369] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    18.369] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    18.370] (II) AIGLX: enabled GLX_INTEL_swap_event
[    18.370] (II) AIGLX: enabled GLX_SGI_swap_control
[    18.370] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    18.370] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    18.370] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    18.370] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    18.370] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    18.370] (II) AIGLX: Loaded and initialized i965
[    18.370] (II) GLX: Initialized DRI2 GL provider for screen 0
[    18.371] (II) modeset(0): Damage tracking initialized
[    18.371] (II) modeset(0): Setting screen physical size to 361 x 203
 



sur l'ecran 0 (du portable )

il y a ceci


[    17.677] (II) xfree86: Adding drm device (/dev/dri/card0)
[    17.677] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    17.678] (EE) systemd-logind: failed to take device /dev/dri/card1: Invalid argument
[    18.187] (--) PCI:*(0:0:2:0) 8086:0a16:103c:2162 rev 9, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
 



au niveau matériel on voit bien l intel


00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
 



mais pas la radeon  (merci pour les balises je souffre moins  wink   )

tu a combien de sortie vidéo sur cette machine  , HDMI et une autre ?

Dernière modification par robert2a (21-06-2017 18:14:17)

Hors ligne

#14 21-06-2017 18:17:08

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Juste une hdmi

Hors ligne

#15 21-06-2017 19:37:56

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

re , j'ai perdu le net  hmm

tu a pas une touche pour basculer du portable sur l' ecran externe ?

je vois que ça :


[    18.278] (II) modeset(0): EDID for output eDP-1
 


aucune référence au HDMI

c'est encore un truc spécifique au portable  sad
et pour la carte radeon je la vois pas , ni matériel ni logiciel sur le log
faut voir sur le net comment ils font fonctionner le système

tu est sur le gpu intel , le driver utilisé celui du noyau (KMS) , le gpu est bien pris en charge
tu peu tester avec le paquet mesa-utils


apt-get --reinstall install mesa-utils
 



la commande glxinfo


glxinfo -B
 


tu a aussi l' engrenage avec glxgears (fermer avec la petite croix de la fenetre)


glxgears
 



pour activer la carte radeon ou pour utiliser la sortie HDMI je sais pas  hmm

Dernière modification par robert2a (21-06-2017 19:52:53)

Hors ligne

#16 21-06-2017 22:12:24

èfpé
Membre
Inscription : 10-07-2016

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Re-,

Sur la page « Pilotes libres AMD/ATI (radeon, r128, mach64) » du wiki Debian il y a paragraphe consacré aux « Cartes graphiques hybrides » ; mais s'agit-il bien de la même chose ?

Sinon, les retours des commandes suivantes pourraient être intéressants :

lspci -nnk | egrep -A3 'VGA|Display'

et

xrandr --verbose


Ne serait-ce que pour documenter un peu plus le fil de discussion.

@robert2a : as-tu regardé si le fichier trusted.gpg avait été recréé (où ? quels droits ?) après un update ?

Dernière modification par èfpé (21-06-2017 22:14:24)

Hors ligne

#17 22-06-2017 00:29:39

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

dans /etc/apt


cd /etc/apt
 



ls -l
 


retour


ls -l
total 32
drwxr-xr-x 2 root root 4096 juin  21 20:08 apt.conf.d
drwxr-xr-x 2 root root 4096 févr.  5 00:07 listbugs
-rw-r--r-- 1 root root   99 janv. 15  2016 listchanges.conf
drwxr-xr-x 2 root root 4096 juin  10  2015 preferences.d
-rw-r--r-- 1 root root  720 juin  19 17:12 sources.list
-rw-r--r-- 1 root root    0 janv. 15  2016 sources.list~
drwxr-xr-x 2 root root 4096 juin  10  2015 sources.list.d
-rw------- 1 root root 1200 juin  21 13:26 trustdb.gpg
drwxr-xr-x 2 root root 4096 juin   6 10:03 trusted.gpg.d
 



cd /etc/apt/trusted.gpg.d
 



ls -l
 


retour


total 48
-rw-r--r-- 1 root root 5138 nov.  30  2014 debian-archive-jessie-automatic.gpg
-rw-r--r-- 1 root root 5147 nov.  30  2014 debian-archive-jessie-security-automatic.gpg
-rw-r--r-- 1 root root 2775 nov.  30  2014 debian-archive-jessie-stable.gpg
-rw-r--r-- 1 root root 7483 mai   25 20:17 debian-archive-stretch-automatic.gpg
-rw-r--r-- 1 root root 7492 mai   25 20:17 debian-archive-stretch-security-automatic.gpg
-rw-r--r-- 1 root root 2275 mai   25 20:17 debian-archive-stretch-stable.gpg
-rw-r--r-- 1 root root 3780 nov.  30  2014 debian-archive-wheezy-automatic.gpg
-rw-r--r-- 1 root root 2851 nov.  30  2014 debian-archive-wheezy-stable.gpg
 



comme j'ai fait un rm pour supprimé le trusted.gpg , il a été recréé juste après avec un apt-get update (ce cou ci sans erreur )

Dernière modification par robert2a (22-06-2017 00:36:02)

Hors ligne

#18 22-06-2017 09:39:48

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour les amis,

oui, j'ai une touche pour passer d'un écran à l'autre. Elle ne fonctionne pas avec Stretch/

stretch@debian:~$ glxinfo -B
name of display: :0
display: :0  screen: 0
direct rendering: Yes
Extended renderer info (GLX_MESA_query_renderer):
    Vendor: Intel Open Source Technology Center (0x8086)
    Device: Mesa DRI Intel(R) Haswell Mobile  (0xa16)
    Version: 13.0.6
    Accelerated: yes
    Video memory: 1536MB
    Unified memory: yes
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.1
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Haswell Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 13.0.6
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 13.0.6
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

OpenGL ES profile version string: OpenGL ES 3.1 Mesa 13.0.6
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10

stretch@debian:~$



stretch@debian:~$ glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
410 frames in 5.0 seconds = 81.889 FPS
XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
      after 453 requests (150 known processed) with 0 events remaining.
stretch@debian:~$



stretch@debian:~$ lspci -nnk | egrep -A3 'VGA|Display'
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09)
  Subsystem: Hewlett-Packard Company Haswell-ULT Integrated Graphics Controller [103c:2162]
  Kernel driver in use: i915
  Kernel modules: i915
--
0a:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430] [1002:6660] (rev ff)
  Kernel driver in use: radeon
  Kernel modules: radeon
stretch@debian:~$



stretch@debian:~$ xrandr --verbose
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (0x74) normal (normal left inverted right x axis y axis) 309mm x 173mm
  Identifier: 0x72
  Timestamp:  195286
  Subpixel:   unknown
  Gamma:      1.0:1.0:1.0
  Brightness: 1.0
  Clones:    
  CRTC:       0
  CRTCs:      0 1 2
  Transform:  1.000000 0.000000 0.000000
              0.000000 1.000000 0.000000
              0.000000 0.000000 1.000000
             filter:
  _MUTTER_PRESENTATION_OUTPUT: 0
  EDID:
    00ffffffffffff0006af3c1000000000
    00160104901f11780210b59758579226
    1e505400000001010101010101010101
    010101010101ce1d56d2500026301010
    3e0035ad10000018df1356d250002630
    10103e0035ad10000018000000000000
    00000000000000000000000000000002
    000c39cc0d3c640f0c1b6f202020000d
  scaling mode: Full aspect
    supported: None, Full, Center, Full aspect
  Broadcast RGB: Automatic
    supported: Automatic, Full, Limited 16:235
  audio: auto
    supported: force-dvi, off, auto, on
  1366x768 (0x74) 76.300MHz -HSync -VSync *current +preferred
        h: width  1366 start 1382 end 1398 total 1576 skew    0 clock  48.41KHz
        v: height  768 start  771 end  785 total  806           clock  60.07Hz
  1366x768 (0x75) 50.870MHz -HSync -VSync
        h: width  1366 start 1382 end 1398 total 1576 skew    0 clock  32.28KHz
        v: height  768 start  771 end  785 total  806           clock  40.05Hz
  1360x768 (0x76) 84.750MHz -HSync +VSync
        h: width  1360 start 1432 end 1568 total 1776 skew    0 clock  47.72KHz
        v: height  768 start  771 end  781 total  798           clock  59.80Hz
  1360x768 (0x77) 72.000MHz +HSync -VSync
        h: width  1360 start 1408 end 1440 total 1520 skew    0 clock  47.37KHz
        v: height  768 start  771 end  781 total  790           clock  59.96Hz
  1024x768 (0x78) 133.475MHz -HSync +VSync DoubleScan
        h: width  1024 start 1100 end 1212 total 1400 skew    0 clock  95.34KHz
        v: height  768 start  768 end  770 total  794           clock  60.04Hz
  1024x768 (0x79) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  960x720 (0x7a) 117.000MHz -HSync +VSync DoubleScan
        h: width   960 start 1024 end 1128 total 1300 skew    0 clock  90.00KHz
        v: height  720 start  720 end  722 total  750           clock  60.00Hz
  928x696 (0x7b) 109.150MHz -HSync +VSync DoubleScan
        h: width   928 start  976 end 1088 total 1264 skew    0 clock  86.35KHz
        v: height  696 start  696 end  698 total  719           clock  60.05Hz
  896x672 (0x7c) 102.400MHz -HSync +VSync DoubleScan
        h: width   896 start  960 end 1060 total 1224 skew    0 clock  83.66KHz
        v: height  672 start  672 end  674 total  697           clock  60.01Hz
  960x600 (0x7d) 77.000MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  74.04KHz
        v: height  600 start  601 end  604 total  617           clock  60.00Hz
  960x540 (0x7e) 69.250MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  66.59KHz
        v: height  540 start  541 end  544 total  555           clock  59.99Hz
  800x600 (0x7f) 81.000MHz +HSync +VSync DoubleScan
        h: width   800 start  832 end  928 total 1080 skew    0 clock  75.00KHz
        v: height  600 start  600 end  602 total  625           clock  60.00Hz
  800x600 (0x80) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x81) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  840x525 (0x82) 73.125MHz -HSync +VSync DoubleScan
        h: width   840 start  892 end  980 total 1120 skew    0 clock  65.29KHz
        v: height  525 start  526 end  529 total  544           clock  60.01Hz
  840x525 (0x83) 59.500MHz +HSync -VSync DoubleScan
        h: width   840 start  864 end  880 total  920 skew    0 clock  64.67KHz
        v: height  525 start  526 end  529 total  540           clock  59.88Hz
  800x512 (0x84) 51.562MHz +HSync +VSync DoubleScan
        h: width   800 start  800 end  828 total  832 skew    0 clock  61.97KHz
        v: height  512 start  512 end  514 total  515           clock  60.17Hz
  700x525 (0x85) 61.000MHz +HSync +VSync DoubleScan
        h: width   700 start  744 end  820 total  940 skew    0 clock  64.89KHz
        v: height  525 start  526 end  532 total  541           clock  59.98Hz
  640x512 (0x86) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  664 end  720 total  844 skew    0 clock  63.98KHz
        v: height  512 start  512 end  514 total  533           clock  60.02Hz
  720x450 (0x87) 53.250MHz -HSync +VSync DoubleScan
        h: width   720 start  760 end  836 total  952 skew    0 clock  55.93KHz
        v: height  450 start  451 end  454 total  467           clock  59.89Hz
  640x480 (0x88) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  688 end  744 total  900 skew    0 clock  60.00KHz
        v: height  480 start  480 end  482 total  500           clock  60.00Hz
  640x480 (0x89) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  680x384 (0x8a) 42.375MHz -HSync +VSync DoubleScan
        h: width   680 start  716 end  784 total  888 skew    0 clock  47.72KHz
        v: height  384 start  385 end  390 total  399           clock  59.80Hz
  680x384 (0x8b) 36.000MHz +HSync -VSync DoubleScan
        h: width   680 start  704 end  720 total  760 skew    0 clock  47.37KHz
        v: height  384 start  385 end  390 total  395           clock  59.96Hz
  576x432 (0x8c) 40.810MHz -HSync +VSync DoubleScan
        h: width   576 start  608 end  668 total  760 skew    0 clock  53.70KHz
        v: height  432 start  432 end  434 total  447           clock  60.06Hz
  512x384 (0x8d) 32.500MHz -HSync -VSync DoubleScan
        h: width   512 start  524 end  592 total  672 skew    0 clock  48.36KHz
        v: height  384 start  385 end  388 total  403           clock  60.00Hz
  400x300 (0x8e) 20.000MHz +HSync +VSync DoubleScan
        h: width   400 start  420 end  484 total  528 skew    0 clock  37.88KHz
        v: height  300 start  300 end  302 total  314           clock  60.32Hz
  400x300 (0x8f) 18.000MHz +HSync +VSync DoubleScan
        h: width   400 start  412 end  448 total  512 skew    0 clock  35.16KHz
        v: height  300 start  300 end  301 total  312           clock  56.34Hz
  320x240 (0x90) 12.587MHz -HSync -VSync DoubleScan
        h: width   320 start  328 end  376 total  400 skew    0 clock  31.47KHz
        v: height  240 start  245 end  246 total  262           clock  60.05Hz
stretch@debian:~$

Hors ligne

#19 22-06-2017 14:01:41

Mercredi
Membre
Distrib. : Testing
Noyau : 4.13
(G)UI : Gnome
Inscription : 25-09-2015

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour,

J'ai un portable Dell avec une Radeon plus ancienne, la touche pour basculer d'écran ne fonctionne pas mais je peux choisir quel(s) écran(s) utiliser dans la section «Écrans» des paramètres Gnome.

Si tu vas dans paramètres (icône clé et tournevis) puis écran, vois-tu les 2 écrans ?

robert2a a écrit :

Gnome commence a me fatiguer  tongue

regarde avec l explorateur de fichier dans /home/user/.local/share/xorg/Xorg.1.log

.local est un fichier caché , et user a remplacé par le nom de ton logging


Et Gnome créa le fichier de log nomade. out.gif


De toutes les forces de l'univers, la plus dure à surmonter, c'est la force de l'habitude. T.Pratchett - Trois Soeurcières.

Hors ligne

#20 22-06-2017 14:22:02

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Salut Mercredi,

dans les paramètre, je ne vois qu'un écran, celui intégré.

Hors ligne

#21 22-06-2017 17:24:05

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour
oui le souci est la  , on ne voit a aucun moment l'écran externe , sinon le reste a l' air correct . ( idem pour le connecteur HDMI je ne le voit pas )
et pour la gestion entre gpu intel et gpu radeon idem , je sais pas comment ça fonctionne .

Hors ligne

#22 22-06-2017 18:11:39

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

bon, merci quand même.
Je vais essayer de trouver une solution pour ce matos :-(

Dernière modification par neomitch (22-06-2017 18:42:51)

Hors ligne

#23 22-06-2017 18:42:37

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Je continue si ça peut aider :

Je viens de trouver
https://community.linuxmint.com/tutorial/view/1501

par contre problème :

root@debian:/home/stretch# apt-get install fglrx
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'
état... Fait
Aucune version du paquet fglrx n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'
il est devenu obsolète
ou qu'il n'est disponible que sur une autre source

E: Le paquet « fglrx » n'a pas de version susceptible d'être installée
root@debian:/home/stretch#
 



https://ubuntuforums.org/showthread.php?t=2331196
Il semble que le problème est résolu. Mais suis largué ;-)

https://unix.stackexchange.com/question … on-r5-m330

Dernière modification par neomitch (22-06-2017 18:52:43)

Hors ligne

#24 24-06-2017 23:02:46

neomitch
Membre
Distrib. : Debian 9.0
Noyau : Linux 4.9.0-3-amd64
(G)UI : Gnome
Inscription : 20-06-2017

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

De retour ;-)

avec cette config, je pouvais voir mon deuxième écran.
Ce qui est bizard, c'est le modèle de la carte graphique qui est différent alors que c'est le même ordi.
Est-ce que ça peut-être une piste ?


System:    Host: PC-HP Kernel: 4.4.0-62-generic x86_64 (64 bit) Desktop: Cinnamon 3.2.7
           Distro: Linux Mint 18.1 Serena
Machine:   System: Hewlett-Packard (portable) product: HP Pavilion dm3 Notebook PC v: 039F100000240000110320000
           Mobo: Flextronics model: 3650 v: 41.3A Bios: Hewlett-Packard v: F.03 date: 09/10/2009
CPU:       Dual core Intel U4100 (-MCP-) cache: 2048 KB
           clock speeds: max: 1300 MHz 1: 1200 MHz 2: 1200 MHz
Graphics:  Card: NVIDIA GT218M [GeForce G 105M]
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.02hz
           GLX Renderer: Gallium 0.4 on NVA8 GLX Version: 3.0 Mesa 11.2.0
Audio:     Card-1 NVIDIA High Definition Audio Controller driver: snd_hda_intel
           Card-2 Intel 82801I (ICH9 Family) HD Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.4.0-62-generic
Network:   Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k
           IF: wlp2s0 state: up mac: 0c:60:76:6a:e7:6e
           Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169
           IF: enp3s0 state: down mac: 00:21:cc:40:9a:c3
Drives:    HDD Total Size: 320.1GB (3.7% used) ID-1: /dev/sda model: WDC_WD3200BEKT size: 320.1GB
Partition: ID-1: / size: 290G used: 8.0G (3%) fs: ext4 dev: /dev/dm-0
           ID-2: /boot size: 472M used: 111M (25%) fs: ext2 dev: /dev/sda1
           ID-3: swap-1 size: 3.22GB used: 0.00GB (0%) fs: swap dev: /dev/dm-2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A gpu: 47.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 187 Uptime: 19:12 Memory: 700.5/3005.4MB Client: Shell (bash) inxi: 2.2.35

Dernière modification par neomitch (25-06-2017 09:17:04)

Hors ligne

#25 25-06-2017 09:09:51

robert2a
Membre
Lieu : France
Distrib. : Stretch 9
Noyau : Linux 4.9.0-3 4.9.30-2
(G)UI : Mate
Inscription : 15-11-2014

Re : [RESOLU] Carte graphique AMD Radeon HD 8670M

Bonjour
pour ton #23 ils parlent du driver propriétaire de AMD / ATI (du constructeur )
pour ton #24 je vois une carte nvidia  => Graphics:  Card: NVIDIA GT218M [GeForce G 105M]

et normalement tu a une  Radeon HD 8670M  sur ta machine

Hors ligne

Pied de page des forums