Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 23-06-2017 16:34:50

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : W$10 / stretch / ubuntu 17.04 / buster-sid
Noyau : Linux 4.13.0-0.bpo.1-amd64
(G)UI : Mate / Gdm3
Inscription : 11-03-2017

[résolu] smartmontools

j'ai installé smartmontools et j'essaie de le comprendre

normalement , mon disque est ok  mais , dans le doute , j'ai fait des tests .

$ sudo smartctl -a /dev/sda


[sudo] Mot de passe de alain : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda Green (AF)
Device Model:     ST2000DL003-9VT166
Serial Number:    6YD1QBLS
LU WWN Device Id: 5 000c50 0465b459f
Firmware Version: CC3C
User Capacity:    2 000 398 934 016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5900 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun 23 16:31:37 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
          was completed without error.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    (  623) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    ( 343) minutes.
Conveyance self-test routine
recommended polling time:    (   2) minutes.
SCT capabilities:          (0x30b7) SCT Status supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   106   088   006    Pre-fail  Always       -       10647192
  3 Spin_Up_Time            0x0003   093   090   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       842
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   080   060   030    Pre-fail  Always       -       35284810155
  9 Power_On_Hours          0x0032   049   049   000    Old_age   Always       -       44682
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       832
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       836
188 Command_Timeout         0x0032   100   096   000    Old_age   Always       -       4295033196
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   059   050   045    Old_age   Always       -       41 (Min/Max 31/42)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       197
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       842
194 Temperature_Celsius     0x0022   041   050   000    Old_age   Always       -       41 (0 18 0 0 0)
195 Hardware_ECC_Recovered  0x001a   022   006   000    Old_age   Always       -       10647192
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       10
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       44714 (21 8 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3041060308
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3781798400

SMART Error Log Version: 1
ATA Error Count: 834 (device log contains only the most recent five errors)
  CR = Command Register [HEX]
  FR = Features Register [HEX]
  SC = Sector Count Register [HEX]
  SN = Sector Number Register [HEX]
  CL = Cylinder Low Register [HEX]
  CH = Cylinder High Register [HEX]
  DH = Device/Head Register [HEX]
  DC = Device Command Register [HEX]
  ER = Error register [HEX]
  ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 834 occurred at disk power-on lifetime: 37677 hours (1569 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f8 87 9a 00  Error: UNC at LBA = 0x009a87f8 = 10127352

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 30 8a 9a 40 00   7d+11:40:04.319  READ FPDMA QUEUED
  60 00 00 30 89 9a 40 00   7d+11:40:04.319  READ FPDMA QUEUED
  60 00 00 30 88 9a 40 00   7d+11:40:04.318  READ FPDMA QUEUED
  60 00 00 30 87 9a 40 00   7d+11:40:04.318  READ FPDMA QUEUED
  60 00 00 30 86 9a 40 00   7d+11:40:04.318  READ FPDMA QUEUED

Error 833 occurred at disk power-on lifetime: 37677 hours (1569 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f8 87 9a 00  Error: UNC at LBA = 0x009a87f8 = 10127352

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 20 e0 87 9a 40 00   7d+11:40:00.728  READ FPDMA QUEUED
  61 00 20 40 d0 a4 40 00   7d+11:40:00.727  WRITE FPDMA QUEUED
  60 00 20 c0 87 9a 40 00   7d+11:40:00.727  READ FPDMA QUEUED
  61 00 20 20 d0 a4 40 00   7d+11:40:00.727  WRITE FPDMA QUEUED
  60 00 20 a0 87 9a 40 00   7d+11:40:00.727  READ FPDMA QUEUED

Error 832 occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f8 87 9a 00  Error: UNC at LBA = 0x009a87f8 = 10127352

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 30 8a 9a 40 00   6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 30 89 9a 40 00   6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 30 88 9a 40 00   6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 30 87 9a 40 00   6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 30 86 9a 40 00   6d+14:09:31.194  READ FPDMA QUEUED

Error 831 occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff 87 9a 00  Error: WP at LBA = 0x009a87ff = 10127359

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 08 c0 56 5d 40 00   6d+14:09:27.608  WRITE FPDMA QUEUED
  60 00 01 ff 87 9a 40 00   6d+14:09:27.607  READ FPDMA QUEUED
  61 00 90 60 51 5f 40 00   6d+14:09:27.606  WRITE FPDMA QUEUED
  61 00 08 58 63 3b 40 00   6d+14:09:27.606  WRITE FPDMA QUEUED
  61 00 28 ff ff ff 4f 00   6d+14:09:27.606  WRITE FPDMA QUEUED

Error 830 occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 fe 87 9a 00  Error: UNC at LBA = 0x009a87fe = 10127358

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 40 b8 31 7b 43 00   6d+14:09:24.026  READ FPDMA QUEUED
  61 00 10 40 56 5d 40 00   6d+14:09:24.026  WRITE FPDMA QUEUED
  60 00 01 fe 87 9a 40 00   6d+14:09:24.026  READ FPDMA QUEUED
  61 00 08 ff ff ff 4f 00   6d+14:09:24.025  WRITE FPDMA QUEUED
  2f 00 01 10 00 00 20 00   6d+14:09:23.872  READ LOG EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     44252         -
# 2  Short offline       Completed without error       00%     44246         -
# 3  Short offline       Completed without error       00%     43303         -
# 4  Short offline       Completed: read failure       10%     34897         10127352
# 5  Short offline       Completed: read failure       10%     34823         10127352
# 6  Short offline       Completed: read failure       30%     34538         10127352
# 7  Short offline       Completed without error       00%     33775         -
# 8  Short offline       Completed without error       00%     33213         -
# 9  Short offline       Completed without error       00%     33081         -
#10  Short offline       Completed without error       00%     32983         -
#11  Short offline       Completed without error       00%     32912         -
#12  Short offline       Completed without error       00%     32839         -
#13  Short offline       Completed without error       00%     32774         -
#14  Short offline       Completed without error       00%      9038         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 



$ sudo smartctl -x /dev/sda


[sudo] Mot de passe de alain : 
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda Green (AF)
Device Model:     ST2000DL003-9VT166
Serial Number:    6YD1QBLS
LU WWN Device Id: 5 000c50 0465b459f
Firmware Version: CC3C
User Capacity:    2 000 398 934 016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5900 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Jun 23 16:36:51 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is:     0 (vendor specific), recommended: 254
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
          was completed without error.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    (  623) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    ( 343) minutes.
Conveyance self-test routine
recommended polling time:    (   2) minutes.
SCT capabilities:          (0x30b7) SCT Status supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   106   088   006    -    10651160
  3 Spin_Up_Time            PO----   093   090   000    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    842
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    0
  7 Seek_Error_Rate         POSR--   080   060   030    -    35284811108
  9 Power_On_Hours          -O--CK   049   049   000    -    44682
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   100   100   020    -    832
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   001   001   000    -    836
188 Command_Timeout         -O--CK   100   096   000    -    4295033196
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   059   050   045    -    41 (Min/Max 31/42)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    197
193 Load_Cycle_Count        -O--CK   100   100   000    -    842
194 Temperature_Celsius     -O---K   041   050   000    -    41 (0 18 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   022   006   000    -    10651160
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    10
240 Head_Flying_Hours       ------   100   253   000    -    44714 (223 0 0)
241 Total_LBAs_Written      ------   100   253   000    -    3041172148
242 Total_LBAs_Read         ------   100   253   000    -    3781798416
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  SATA NCQ Queued Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    2248  Device vendor specific log
0xa8       GPL,SL  VS      20  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    2819  Device vendor specific log
0xbd       GPL     VS     252  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 834 (device log contains only the most recent 20 errors)
  CR     = Command Register
  FEATR  = Features Register
  COUNT  = Count (was: Sector Count) Register
  LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
  LH     = LBA High (was: Cylinder High) Register    ]   LBA
  LM     = LBA Mid (was: Cylinder Low) Register      ] Register
  LL     = LBA Low (was: Sector Number) Register     ]
  DV     = Device (was: Device/Head) Register
  DC     = Device Control Register
  ER     = Error register
  ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 834 [13] occurred at disk power-on lifetime: 37677 hours (1569 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 f8 00 00  Error: UNC at LBA = 0x009a87f8 = 10127352

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 01 00 00 00 00 9a 8a 30 40 00  7d+11:40:04.319  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 89 30 40 00  7d+11:40:04.319  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 88 30 40 00  7d+11:40:04.318  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 87 30 40 00  7d+11:40:04.318  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 86 30 40 00  7d+11:40:04.318  READ FPDMA QUEUED

Error 833 [12] occurred at disk power-on lifetime: 37677 hours (1569 days + 21 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 f8 00 00  Error: UNC at LBA = 0x009a87f8 = 10127352

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 20 00 00 00 9a 87 e0 40 00  7d+11:40:00.728  READ FPDMA QUEUED
  61 00 00 00 20 00 00 00 a4 d0 40 40 00  7d+11:40:00.727  WRITE FPDMA QUEUED
  60 00 00 00 20 00 00 00 9a 87 c0 40 00  7d+11:40:00.727  READ FPDMA QUEUED
  61 00 00 00 20 00 00 00 a4 d0 20 40 00  7d+11:40:00.727  WRITE FPDMA QUEUED
  60 00 00 00 20 00 00 00 9a 87 a0 40 00  7d+11:40:00.727  READ FPDMA QUEUED

Error 832 [11] occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 f8 00 00  Error: UNC at LBA = 0x009a87f8 = 10127352

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 01 00 00 00 00 9a 8a 30 40 00  6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 89 30 40 00  6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 88 30 40 00  6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 87 30 40 00  6d+14:09:31.194  READ FPDMA QUEUED
  60 00 00 01 00 00 00 00 9a 86 30 40 00  6d+14:09:31.194  READ FPDMA QUEUED

Error 831 [10] occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 ff 00 00  Error: WP at LBA = 0x009a87ff = 10127359

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  61 00 00 00 08 00 00 00 5d 56 c0 40 00  6d+14:09:27.608  WRITE FPDMA QUEUED
  60 00 00 00 01 00 00 00 9a 87 ff 40 00  6d+14:09:27.607  READ FPDMA QUEUED
  61 00 00 00 90 00 00 00 5f 51 60 40 00  6d+14:09:27.606  WRITE FPDMA QUEUED
  61 00 00 00 08 00 00 00 3b 63 58 40 00  6d+14:09:27.606  WRITE FPDMA QUEUED
  61 00 00 00 28 00 00 34 b5 4a b8 40 00  6d+14:09:27.606  WRITE FPDMA QUEUED

Error 830 [9] occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 fe 00 00  Error: UNC at LBA = 0x009a87fe = 10127358

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 40 00 00 03 7b 31 b8 40 00  6d+14:09:24.026  READ FPDMA QUEUED
  61 00 00 00 10 00 00 00 5d 56 40 40 00  6d+14:09:24.026  WRITE FPDMA QUEUED
  60 00 00 00 01 00 00 00 9a 87 fe 40 00  6d+14:09:24.026  READ FPDMA QUEUED
  61 00 00 00 08 00 00 34 b5 4a 60 40 00  6d+14:09:24.025  WRITE FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 28 00  6d+14:09:23.872  READ LOG EXT

Error 829 [8] occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 fd 00 00  Error: UNC at LBA = 0x009a87fd = 10127357

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 01 00 00 00 9a 87 fd 40 00  6d+14:09:20.534  READ FPDMA QUEUED
  61 00 00 00 08 00 00 34 b5 45 10 40 00  6d+14:09:20.534  WRITE FPDMA QUEUED
  61 00 00 00 68 00 00 30 3d e8 80 40 00  6d+14:09:20.533  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 39 44 ca 40 40 00  6d+14:09:20.515  READ FPDMA QUEUED
  61 00 00 00 08 00 00 34 b5 4a 48 40 00  6d+14:09:20.463  WRITE FPDMA QUEUED

Error 828 [7] occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 fc 00 00  Error: UNC at LBA = 0x009a87fc = 10127356

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 01 00 00 00 9a 87 fc 40 00  6d+14:09:17.018  READ FPDMA QUEUED
  60 00 00 00 40 00 00 03 7b 31 f8 40 00  6d+14:09:17.018  READ FPDMA QUEUED
  2f 00 00 00 01 00 00 00 00 00 10 28 00  6d+14:09:16.911  READ LOG EXT
  60 00 00 00 01 00 00 00 9a 87 fb 40 00  6d+14:09:13.605  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 00 00  6d+14:09:13.584  FLUSH CACHE EXT

Error 827 [6] occurred at disk power-on lifetime: 37655 hours (1568 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 00 9a 87 fb 00 00  Error: UNC at LBA = 0x009a87fb = 10127355

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  60 00 00 00 01 00 00 00 9a 87 fb 40 00  6d+14:09:13.605  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00 00 00 00 00 00  6d+14:09:13.584  FLUSH CACHE EXT
  61 00 00 00 28 00 00 00 1a 06 f8 40 00  6d+14:09:13.563  WRITE FPDMA QUEUED
  60 00 00 00 08 00 00 39 45 2c b8 40 00  6d+14:09:13.562  READ FPDMA QUEUED
  61 00 00 00 08 00 00 39 44 da 50 40 00  6d+14:09:13.562  WRITE FPDMA QUEUED

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     44252         -
# 2  Short offline       Completed without error       00%     44246         -
# 3  Short offline       Completed without error       00%     43303         -
# 4  Short offline       Completed: read failure       10%     34897         10127352
# 5  Short offline       Completed: read failure       10%     34823         10127352
# 6  Short offline       Completed: read failure       30%     34538         10127352
# 7  Short offline       Completed without error       00%     33775         -
# 8  Short offline       Completed without error       00%     33213         -
# 9  Short offline       Completed without error       00%     33081         -
#10  Short offline       Completed without error       00%     32983         -
#11  Short offline       Completed without error       00%     32912         -
#12  Short offline       Completed without error       00%     32839         -
#13  Short offline       Completed without error       00%     32774         -
#14  Short offline       Completed without error       00%      9038         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    41 Celsius
Power Cycle Min/Max Temperature:     31/42 Celsius
Lifetime    Min/Max Temperature:     18/50 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        59 minutes
Min/Max recommended Temperature:     14/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (64)

Index    Estimated Time   Temperature Celsius
  65    2017-06-18 11:19     ?  -
  66    2017-06-18 12:18    42  ***********************
  67    2017-06-18 13:17     ?  -
  68    2017-06-18 14:16    42  ***********************
  69    2017-06-18 15:15     ?  -
  70    2017-06-18 16:14    42  ***********************
  71    2017-06-18 17:13    43  ************************
  72    2017-06-18 18:12    43  ************************
  73    2017-06-18 19:11    43  ************************
  74    2017-06-18 20:10    44  *************************
  75    2017-06-18 21:09    43  ************************
  76    2017-06-18 22:08    44  *************************
  77    2017-06-18 23:07    42  ***********************
  78    2017-06-19 00:06    43  ************************
  79    2017-06-19 01:05     ?  -
  80    2017-06-19 02:04    44  *************************
 ...    ..(  2 skipped).    ..  *************************
  83    2017-06-19 05:01    44  *************************
  84    2017-06-19 06:00    43  ************************
  85    2017-06-19 06:59    42  ***********************
  86    2017-06-19 07:58    42  ***********************
  87    2017-06-19 08:57    42  ***********************
  88    2017-06-19 09:56    41  **********************
  89    2017-06-19 10:55    41  **********************
  90    2017-06-19 11:54    41  **********************
  91    2017-06-19 12:53    42  ***********************
 ...    ..(  2 skipped).    ..  ***********************
  94    2017-06-19 15:50    42  ***********************
  95    2017-06-19 16:49    43  ************************
  96    2017-06-19 17:48    44  *************************
  97    2017-06-19 18:47    45  **************************
  98    2017-06-19 19:46     ?  -
  99    2017-06-19 20:45    44  *************************
 100    2017-06-19 21:44     ?  -
 101    2017-06-19 22:43    27  ********
 102    2017-06-19 23:42     ?  -
 103    2017-06-20 00:41    27  ********
 104    2017-06-20 01:40    43  ************************
 105    2017-06-20 02:39    45  **************************
 106    2017-06-20 03:38     ?  -
 107    2017-06-20 04:37    44  *************************
 108    2017-06-20 05:36    43  ************************
 109    2017-06-20 06:35    44  *************************
 110    2017-06-20 07:34    43  ************************
 111    2017-06-20 08:33    43  ************************
 112    2017-06-20 09:32    44  *************************
 113    2017-06-20 10:31     ?  -
 114    2017-06-20 11:30    42  ***********************
 115    2017-06-20 12:29     ?  -
 116    2017-06-20 13:28    42  ***********************
 117    2017-06-20 14:27     ?  -
 118    2017-06-20 15:26    43  ************************
 119    2017-06-20 16:25    42  ***********************
 120    2017-06-20 17:24     ?  -
 121    2017-06-20 18:23    24  *****
 122    2017-06-20 19:22    41  **********************
 123    2017-06-20 20:21     ?  -
 124    2017-06-20 21:20    42  ***********************
 125    2017-06-20 22:19     ?  -
 126    2017-06-20 23:18    42  ***********************
 127    2017-06-21 00:17    43  ************************
   0    2017-06-21 01:16    43  ************************
   1    2017-06-21 02:15    43  ************************
   2    2017-06-21 03:14    44  *************************
 ...    ..(  8 skipped).    ..  *************************
  11    2017-06-21 12:05    44  *************************
  12    2017-06-21 13:04     ?  -
  13    2017-06-21 14:03    23  ****
  14    2017-06-21 15:02    41  **********************
  15    2017-06-21 16:01    43  ************************
  16    2017-06-21 17:00    43  ************************
  17    2017-06-21 17:59    44  *************************
  18    2017-06-21 18:58    44  *************************
  19    2017-06-21 19:57    44  *************************
  20    2017-06-21 20:56    45  **************************
  21    2017-06-21 21:55     ?  -
  22    2017-06-21 22:54    45  **************************
  23    2017-06-21 23:53    45  **************************
  24    2017-06-22 00:52    45  **************************
  25    2017-06-22 01:51    44  *************************
  26    2017-06-22 02:50     ?  -
  27    2017-06-22 03:49    43  ************************
  28    2017-06-22 04:48     ?  -
  29    2017-06-22 05:47    23  ****
  30    2017-06-22 06:46    39  ********************
  31    2017-06-22 07:45    41  **********************
  32    2017-06-22 08:44    42  ***********************
  33    2017-06-22 09:43    43  ************************
  34    2017-06-22 10:42    43  ************************
  35    2017-06-22 11:41    44  *************************
 ...    ..(  2 skipped).    ..  *************************
  38    2017-06-22 14:38    44  *************************
  39    2017-06-22 15:37    43  ************************
  40    2017-06-22 16:36    42  ***********************
  41    2017-06-22 17:35    41  **********************
  42    2017-06-22 18:34     ?  -
  43    2017-06-22 19:33    21  **
  44    2017-06-22 20:32     ?  -
  45    2017-06-22 21:31    24  *****
  46    2017-06-22 22:30    40  *********************
  47    2017-06-22 23:29    42  ***********************
  48    2017-06-23 00:28    42  ***********************
  49    2017-06-23 01:27    43  ************************
 ...    ..(  2 skipped).    ..  ************************
  52    2017-06-23 04:24    43  ************************
  53    2017-06-23 05:23    42  ***********************
  54    2017-06-23 06:22    42  ***********************
  55    2017-06-23 07:21     ?  -
  56    2017-06-23 08:20    21  **
  57    2017-06-23 09:19     ?  -
  58    2017-06-23 10:18    22  ***
  59    2017-06-23 11:17     ?  -
  60    2017-06-23 12:16    31  ************
  61    2017-06-23 13:15    40  *********************
  62    2017-06-23 14:14    40  *********************
  63    2017-06-23 15:13    41  **********************
  64    2017-06-23 16:12    42  ***********************

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            7  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
 




normalement , les lignes #4 , #5 et #6 ne sont plus d'actualité mais je ne sais pas lire ces rapports  .

en même temps ,

3 Spin_Up_Time            0x0003   093   090   000    Pre-fail  Always       -       0
5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0



donc , normalement , le disque est bon .

je me trompe ?

Dernière modification par Debian Alain (24-06-2017 10:20:02)


1498826560.jpg 1498812139.jpg Bip ! Bip !

Hors ligne

#2 23-06-2017 17:14:35

raleur
Membre
Inscription : 03-10-2014

Re : [résolu] smartmontools

Qu'appelles-tu "les lignes #4 , #5 et #6" ?

Les attributs SMART sont dans les clous. Pas de secteur défectueux réalloué ou illisible.
Par contre il y a eu une série d'erreurs de lecture ponctuelle. Apparemment c'est résolu sinon l'attribut Current_Pending_Sector ne serait pas à 0.
Je trouve que la température, 41 °C, est un peu haute. Apparemment elle est montée plus haut, vers 50° ce qui est limite.

Hors ligne

#3 23-06-2017 19:07:35

Debian Alain
Membre
Lieu : BREST 29200
Distrib. : W$10 / stretch / ubuntu 17.04 / buster-sid
Noyau : Linux 4.13.0-0.bpo.1-amd64
(G)UI : Mate / Gdm3
Inscription : 11-03-2017

Re : [résolu] smartmontools

Qu'appelles-tu "les lignes #4 , #5 et #6" ?



# 4  Short offline       Completed: read failure       10%     34897         10127352
# 5  Short offline       Completed: read failure       10%     34823         10127352
# 6  Short offline       Completed: read failure       30%     34538         10127352



$ sudo hddtemp /dev/sda /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf


/dev/sda: ST2000DL003-9VT166: 40°C
/dev/sdb: ST3000DM001-1CH166: 41°C
/dev/sdc: ST2000DM001-9YN164: 42°C
/dev/sdd: ST2000DM001-1CH164: 42°C
/dev/sde: ST4000VM000-2AF166: 39°C
/dev/sdf: WDC WD40EFRX-68WT0N0: 38°C
 

Dernière modification par Debian Alain (23-06-2017 19:43:19)


1498826560.jpg 1498812139.jpg Bip ! Bip !

Hors ligne

#4 23-06-2017 20:13:17

raleur
Membre
Inscription : 03-10-2014

Re : [résolu] smartmontools

Je n'avais pas lu le rapport jusqu'au bout.
En effet l'erreur de lecture semble avoir été transitoire.

Hors ligne

Pied de page des forums