Bonsoir !
Je n'ai jamais vraiment pigé les données SMART bien qu'ayant lu quelques tutos.
Et j'aimerais savoir si mon disque dur ici présent a encore de longues années devant lui, car j'ai la poisse avec les disques durs ces temps-ci...
Merci la doc :
https://debian-facile.org/doc:systeme:smartmontoolsVoici ses données SMART :
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-60ZF5A0
Serial Number: WD-WMC1S2719914
LU WWN Device Id: 5 0014ee 003881a11
Firmware Version: 80.00A80
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Wed Sep 20 00:36:29 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Enable Automatic Offline failed: scsi error badly formed scsi parameters
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10EZEX-60ZF5A0
Serial Number: WD-WMC1S2719914
LU WWN Device Id: 5 0014ee 003881a11
Firmware Version: 80.00A80
User Capacity: 1 000 204 886 016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Wed Sep 20 00:38:29 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: (10140) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 117) minutes.
SCT capabilities: (0x30bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 175 172 021 Pre-fail Always - 2241
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2177
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002f 197 197 051 Pre-fail Always - 301
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 2993
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1624
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 030 030 000 Old_age Always - 76
188 Command_Timeout 0x0032 001 001 000 Old_age Always - 3221275082751
190 Airflow_Temperature_Cel 0x0022 065 063 040 Old_age Always - 35 (Min/Max 35/35)
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 586
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1590
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 24102 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 24102 occurred at disk power-on lifetime: 2973 hours (123 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 00 53 4f c2 e0 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d8 00 00 4f c2 e0 00 00:00:02.725 SMART ENABLE OPERATIONS
ec 00 00 00 00 00 a0 00 00:00:02.725 IDENTIFY DEVICE
Error 24101 occurred at disk power-on lifetime: 2971 hours (123 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
e0 00 00 00 00 00 00 00 00:46:08.849 STANDBY IMMEDIATE
ef 90 03 00 00 00 00 00 00:46:07.533 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 00 00 00:46:07.533 SET FEATURES [Enable write cache]
ef 90 03 00 00 00 00 00 00:46:07.393 SET FEATURES [Disable SATA feature]
Error 24100 occurred at disk power-on lifetime: 2971 hours (123 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 03 00 00 00 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 90 03 00 00 00 00 00 00:46:07.533 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 00 00 00:46:07.533 SET FEATURES [Enable write cache]
ef 90 03 00 00 00 00 00 00:46:07.393 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 00 00 00:46:07.392 SET FEATURES [Enable write cache]
Error 24099 occurred at disk power-on lifetime: 2971 hours (123 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 00 00 00 00 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 02 00 00 00 00 00 00 00:46:07.533 SET FEATURES [Enable write cache]
ef 90 03 00 00 00 00 00 00:46:07.393 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 00 00 00:46:07.392 SET FEATURES [Enable write cache]
Error 24098 occurred at disk power-on lifetime: 2971 hours (123 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 61 03 00 00 00 00 Device Fault; Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ef 90 03 00 00 00 00 00 00:46:07.393 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 00 00 00:46:07.392 SET FEATURES [Enable write cache]
ef 90 03 00 00 00 00 00 00:46:07.253 SET FEATURES [Disable SATA feature]
ef 02 00 00 00 00 00 00 00:46:07.252 SET FEATURES [Enable write cache]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 2993 -
# 2 Short offline Completed without error 00% 2976 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Malheureusement abstrait pour moi
Et GNOME-disk-utility semble donner des valeurs différentes :
Si quelqu'un peut m'aider à interprêter tout ça, je le remercie d'avance !
Dernière modification par Caribou22 (19-09-2017 23:43:58)