Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 02-04-2018 13:20:41

Richard_Denis
Membre
Lieu : Chantilly
Distrib. : Debian Stretch
Noyau : 4.9
(G)UI : xfce
Inscription : 10-04-2016

Lag navigation web [chipset i915]

Bonjour à tous,
Petit soucis pas non plus méchant. Lors de la navigation internet et notamment lors du scroll, mon contenu web lag. Ça reste désagréable mais pas rédhibitoire.
Quelqu’un a t-il déjà eu le soucis ? merci.gif

Merci par avance

PS, J'oubliais, mon chipset c'est du i915

uname -a


Linux debian-x220 4.9.0-6-amd64 #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) x86_64 GNU/Linux



dmesg


ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver



lsusb


Bus 004 Device 003: ID 0bdb:1911 Ericsson Business Mobile Networks BV
Bus 004 Device 006: ID 058f:6387 Alcor Micro Corp. Flash Drive
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 005: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated Camera (0.3MP)
Bus 003 Device 004: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)
Bus 003 Device 003: ID 1395:002d Sennheiser Communications
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubhttps://debian-facile.org/viewtopic.php?id=21126



Edit à toto : Mis les commandes et leurs retours en utilisant le bouton Code user du forum pour que ce soit bien visible par tous.

Dernière modification par Richard_Denis (02-04-2018 13:24:28)

Hors ligne

#2 02-04-2018 14:36:58

Richard_Denis
Membre
Lieu : Chantilly
Distrib. : Debian Stretch
Noyau : 4.9
(G)UI : xfce
Inscription : 10-04-2016

Re : Lag navigation web [chipset i915]

Au cas ou, pour plus d'info :


dmesg
[    0.000000] Linux version 4.9.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=2ab72944-0d73-4e51-9e2e-3e2663adbb86 ro quiet
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000090a74fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000090a75000-0x00000000dae9efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 4290KT2/4290KT2, BIOS 8DET73WW (1.43 ) 10/12/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask FE0000000 write-back
[    0.000000]   7 base 11F000000 mask FFF000000 uncachable
[    0.000000]   8 base 11E800000 mask FFF800000 uncachable
[    0.000000]   9 base 11E600000 mask FFFE00000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x90a75 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff956f40097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x8bb39000, 0x8bb39fff] PGTABLE
[    0.000000] BRK [0x8bb3a000, 0x8bb3afff] PGTABLE
[    0.000000] BRK [0x8bb3b000, 0x8bb3bfff] PGTABLE
[    0.000000] BRK [0x8bb3c000, 0x8bb3cfff] PGTABLE
[    0.000000] BRK [0x8bb3d000, 0x8bb3dfff] PGTABLE
[    0.000000] BRK [0x8bb3e000, 0x8bb3efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b37000-0x36d92fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DAFFE120 0000AC (v01 LENOVO TP-8D    00001430 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DAFE7000 0000F4 (v04 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFEA000 00FA89 (v01 LENOVO TP-8D    00001430 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF2D000 000040
[    0.000000] ACPI: FACS 0x00000000DAF2D000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-8D    00001430 PTEC 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFFA000 0007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x00000000DAFE6000 000038 (v01 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFE5000 000098 (v01 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFE4000 00003C (v01 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: ECDT 0x00000000DAFE3000 000052 (v01 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: ASF! 0x00000000DAFE9000 0000A5 (v32 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: TCPA 0x00000000DAFE2000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFE1000 000AAB (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFE0000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: DMAR 0x00000000DAFDF000 0000E8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: UEFI 0x00000000DAFDE000 00003E (v01 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDD000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000DAFDC000 000292 (v01 LENOVO TP-8D    00001430 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11e5f9000-0x11e5fdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011e5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x0000000090a74fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011e5fffff]
[    0.000000] On node 0 totalpages: 715793
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9178 pages used for memmap
[    0.000000]   DMA32 zone: 587381 pages, LIFO batch:31
[    0.000000]   Normal zone: 1944 pages used for memmap
[    0.000000]   Normal zone: 124416 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90a75000-0xdae9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff95705e200000 s105240 r8192 d29928 u262144
[    0.000000] pcpu-alloc: s105240 r8192 d29928 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 704451
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=2ab72944-0d73-4e51-9e2e-3e2663adbb86 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2713844K/2863172K available (6236K kernel code, 1159K rwdata, 2868K rodata, 1416K init, 688K bss, 149328K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2790.976 MHz processor
[    0.000082] Calibrating delay loop (skipped), value calculated using timer frequency.. 5581.95 BogoMIPS (lpj=11163904)
[    0.000089] pid_max: default: 32768 minimum: 301
[    0.000136] ACPI: Core revision 20160831
[    0.034331] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.034473] Security Framework initialized
[    0.034475] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.034488] AppArmor: AppArmor disabled by boot time parameter
[    0.035163] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.037604] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.038645] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.038661] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.039323] Disabled fast string operations
[    0.039328] CPU: Physical Processor ID: 0
[    0.039329] CPU: Processor Core ID: 0
[    0.039339] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.039341] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.039346] mce: CPU supports 7 MCE banks
[    0.039365] CPU0: Thermal monitoring enabled (TM1)
[    0.039390] process: using mwait in idle threads
[    0.039397] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.039399] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.039403] Spectre V2 : Mitigation: Full generic retpoline
[    0.040751] Freeing SMP alternatives memory: 24K
[    0.056868] ftrace: allocating 25236 entries in 99 pages
[    0.125907] smpboot: Max logical packages: 4
[    0.125933] DMAR: Host address width 36
[    0.125937] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.125951] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.125954] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.125967] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.125969] DMAR: RMRR base: 0x000000dacd5000 end: 0x000000dacebfff
[    0.125972] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.125977] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.125980] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.125982] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.126886] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.126888] x2apic enabled
[    0.126898] Switched APIC routing to cluster x2apic.
[    0.127476] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.167180] TSC deadline timer enabled
[    0.167187] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.167198] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.167277] ... version:                3
[    0.167278] ... bit width:              48
[    0.167280] ... generic registers:      4
[    0.167282] ... value mask:             0000ffffffffffff
[    0.167283] ... max period:             00007fffffffffff
[    0.167285] ... fixed-purpose events:   3
[    0.167286] ... event mask:             000000070000000f
[    0.169191] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.169518] x86: Booting SMP configuration:
[    0.169521] .... node  #0, CPUs:      #1
[    0.170531] Disabled fast string operations
[    0.173088]  #2
[    0.174044] Disabled fast string operations
[    0.176559]  #3
[    0.177511] Disabled fast string operations
[    0.179698] x86: Booted up 1 node, 4 CPUs
[    0.179704] smpboot: Total of 4 processors activated (22327.80 BogoMIPS)
[    0.189995] devtmpfs: initialized
[    0.190201] x86/mm: Memory block size: 128MB
[    0.198430] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[    0.198649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.198684] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.198818] pinctrl core: initialized pinctrl subsystem
[    0.199144] NET: Registered protocol family 16
[    0.213375] cpuidle: using governor ladder
[    0.233395] cpuidle: using governor menu
[    0.233462] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.233464] ACPI: bus type PCI registered
[    0.233467] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.234000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.234005] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.234022] PCI: Using configuration type 1 for base access
[    0.234122] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.249768] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.250499] ACPI: Added _OSI(Module Device)
[    0.250502] ACPI: Added _OSI(Processor Device)
[    0.250504] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.250507] ACPI: Added _OSI(Processor Aggregator Device)
[    0.250525] ACPI : EC: EC started
[    0.250526] ACPI : EC: interrupt blocked
[    0.252554] ACPI: \: Used as first EC
[    0.252559] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.252563] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.262735] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.275169] ACPI: Dynamic OEM Table Load:
[    0.275195] ACPI: SSDT 0xFFFF957059BDD000 0008C0 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.276270] ACPI: Dynamic OEM Table Load:
[    0.276288] ACPI: SSDT 0xFFFF957059BC1400 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.277096] ACPI: Dynamic OEM Table Load:
[    0.277110] ACPI: SSDT 0xFFFF957059BB0000 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.279689] ACPI : EC: EC stopped
[    0.279692] ACPI : EC: EC started
[    0.279693] ACPI : EC: interrupt blocked
[    0.280160] ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC
[    0.280165] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.280169] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions
[    0.280171] ACPI: Interpreter enabled
[    0.280225] ACPI: (supports S0 S3 S4 S5)
[    0.280227] ACPI: Using IOAPIC for interrupt routing
[    0.280291] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.289108] ACPI: Power Resource [PUBS] (on)
[    0.290722] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.294068] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.299414] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.300711] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.300966] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.301213] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
[    0.301459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[    0.301720] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
[    0.301909] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.302156] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302401] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
[    0.302687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.302698] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.303249] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.303505] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.303511] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.303516] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.303520] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.303555] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.304040] PCI host bridge to bus 0000:00
[    0.304047] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.304052] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.304056] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.304060] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.304064] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.304069] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.304092] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.304340] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.304368] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.304384] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.304395] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.304693] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.304739] pci 0000:00:16.0: reg 0x10: [mem 0xf2625000-0xf262500f 64bit]
[    0.304901] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.305104] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[    0.305140] pci 0000:00:16.3: reg 0x10: [io  0x50b0-0x50b7]
[    0.305161] pci 0000:00:16.3: reg 0x14: [mem 0xf262c000-0xf262cfff]
[    0.305504] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.305543] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[    0.305563] pci 0000:00:19.0: reg 0x14: [mem 0xf262b000-0xf262bfff]
[    0.305584] pci 0000:00:19.0: reg 0x18: [io  0x5080-0x509f]
[    0.305749] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.305853] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.305978] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.306016] pci 0000:00:1a.0: reg 0x10: [mem 0xf262a000-0xf262a3ff]
[    0.306198] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.306299] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.306430] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.306472] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[    0.306657] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.306788] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.306913] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.307086] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.307314] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.307501] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.307727] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.307911] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.308023] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.308143] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.308319] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.308541] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.308717] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.308824] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.308951] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.308989] pci 0000:00:1d.0: reg 0x10: [mem 0xf2629000-0xf26293ff]
[    0.309173] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.309274] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.309393] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.309796] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.309836] pci 0000:00:1f.2: reg 0x10: [io  0x50a8-0x50af]
[    0.309857] pci 0000:00:1f.2: reg 0x14: [io  0x50bc-0x50bf]
[    0.309877] pci 0000:00:1f.2: reg 0x18: [io  0x50a0-0x50a7]
[    0.309897] pci 0000:00:1f.2: reg 0x1c: [io  0x50b8-0x50bb]
[    0.309917] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.309938] pci 0000:00:1f.2: reg 0x24: [mem 0xf2628000-0xf26287ff]
[    0.310052] pci 0000:00:1f.2: PME# supported from D3hot
[    0.310254] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.310293] pci 0000:00:1f.3: reg 0x10: [mem 0xf2624000-0xf26240ff 64bit]
[    0.310346] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.310694] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.311092] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[    0.311489] pci 0000:03:00.0: reg 0x10: [mem 0xf2500000-0xf2501fff 64bit]
[    0.313297] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.325811] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.325825] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.326041] acpiphp: Slot [1] registered
[    0.326054] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.326063] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.326071] pci 0000:00:1c.3:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.326085] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.326367] pci 0000:0d:00.0: [1180:e822] type 00 class 0x088001
[    0.326432] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[    0.326469] pci 0000:0d:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[    0.326794] pci 0000:0d:00.0: supports D1 D2
[    0.326798] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.337846] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.337855] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.337863] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf1cfffff]
[    0.337876] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.338035] pci 0000:0e:00.0: [1033:0194] type 00 class 0x0c0330
[    0.338087] pci 0000:0e:00.0: reg 0x10: [mem 0xf1400000-0xf1401fff 64bit]
[    0.338337] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
[    0.338536] pci 0000:00:1c.6: PCI bridge to [bus 0e]
[    0.338549] pci 0000:00:1c.6:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.341085] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.341344] ACPI : EC: interrupt unblocked
[    0.341356] ACPI : EC: event unblocked
[    0.341369] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.341373] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.341615] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.341619] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.341626] vgaarb: loaded
[    0.341628] vgaarb: bridge control possible 0000:00:02.0
[    0.341851] PCI: Using ACPI for IRQ routing
[    0.345934] PCI: pci_cache_line_size set to 64 bytes
[    0.346425] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.346430] e820: reserve RAM buffer [mem 0x90a75000-0x93ffffff]
[    0.346433] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
[    0.346851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.346868] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.348911] clocksource: Switched to clocksource hpet
[    0.365490] VFS: Disk quotas dquot_6.6.0
[    0.365555] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.365784] pnp: PnP ACPI init
[    0.367057] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.367063] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.367068] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.367072] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.367080] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.367085] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.367089] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.367094] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.367098] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.367103] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.367108] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.367112] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.367117] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.367122] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.367127] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.367132] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.367137] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.367147] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.367481] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.367486] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.367490] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.367495] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.367500] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.367506] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.367511] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.367516] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.367521] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.367525] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.367530] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.367535] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.367542] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.367706] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.367780] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.367854] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[    0.367993] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.368929] pnp: PnP ACPI: found 6 devices
[    0.378720] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.378756] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.378764] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.378770] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.378846] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.378851] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.378856] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.378861] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.378866] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.378870] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.378881] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
[    0.378894] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.378901] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.378909] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.378916] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.378928] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfbfffff]
[    0.378937] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.378952] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.378963] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.378983] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.378989] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.379000] pci 0000:00:1c.3:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.379008] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.379022] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.379027] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.379038] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf1cfffff]
[    0.379046] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.379059] pci 0000:00:1c.6: PCI bridge to [bus 0e]
[    0.379070] pci 0000:00:1c.6:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.379091] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.379095] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.379100] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.379104] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.379108] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.379112] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.379116] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfbfffff]
[    0.379120] pci_bus 0000:02: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.379125] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[    0.379129] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.379133] pci_bus 0000:05: resource 1 [mem 0xf1d00000-0xf24fffff]
[    0.379136] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.379140] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.379144] pci_bus 0000:0d: resource 1 [mem 0xf1500000-0xf1cfffff]
[    0.379148] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.379152] pci_bus 0000:0e: resource 1 [mem 0xf1400000-0xf14fffff]
[    0.379444] NET: Registered protocol family 2
[    0.379933] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.380143] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.380316] TCP: Hash tables configured (established 32768 bind 32768)
[    0.380375] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.380416] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.380569] NET: Registered protocol family 1
[    0.380601] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.381878] PCI: CLS 64 bytes, default 64
[    0.381995] Unpacking initramfs...
[    1.411043] Freeing initrd memory: 18800K
[    1.411186] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.411195] software IO TLB [mem 0x8ca75000-0x90a75000] (64MB) mapped at [ffff956fcca75000-ffff956fd0a74fff]
[    1.412284] audit: initializing netlink subsys (disabled)
[    1.412324] audit: type=2000 audit(1522672388.380:1): initialized
[    1.413483] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.413566] zbud: loaded
[    1.415909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.415988] io scheduler noop registered
[    1.415991] io scheduler deadline registered
[    1.416025] io scheduler cfq registered (default)
[    1.416182] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    1.417427] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.417441] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.417486] intel_idle: MWAIT substates: 0x21120
[    1.417488] intel_idle: v0.4.1 model 0x2A
[    1.417968] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.418493] GHES: HEST is not enabled!
[    1.418636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.440120] 0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A
[    1.440704] Linux agpgart interface v0.103
[    1.457041] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[    1.555116] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.555120] AMD IOMMUv2 functionality not available on this system
[    1.556269] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.559378] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.559393] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.560047] mousedev: PS/2 mouse device common for all mice
[    1.560181] rtc_cmos 00:02: RTC can wake from S4
[    1.560497] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.560550] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.560582] intel_pstate: Intel P-state driver initializing
[    1.561021] ledtrig-cpu: registered to indicate activity on CPUs
[    1.562530] NET: Registered protocol family 10
[    1.563281] mip6: Mobile IPv6
[    1.563287] NET: Registered protocol family 17
[    1.563294] mpls_gso: MPLS GSO support
[    1.563630] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.563957] microcode: sig=0x206a7, pf=0x10, revision=0x29
[    1.564186] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.564533] registered taskstats version 1
[    1.564575] zswap: loaded using pool lzo/zbud
[    1.725890] rtc_cmos 00:02: setting system clock to 2018-04-02 12:33:09 UTC (1522672389)
[    1.726062] PM: Hibernation image not present or could not be loaded.
[    1.729459] Freeing unused kernel memory: 1416K
[    1.729462] Write protecting the kernel read-only data: 12288k
[    1.730783] Freeing unused kernel memory: 1940K
[    1.738279] Freeing unused kernel memory: 1228K
[    1.751427] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.783935] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.784093] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.784115] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.785999] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.786076] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.788931] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.789082] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.789116] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.789800] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.789928] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.832249] pps_core: LinuxPPS API ver. 1 registered
[    1.832252] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.832511] thermal LNXTHERM:00: registered as thermal_zone0
[    1.832513] ACPI: Thermal Zone [THM0] (48 C)
[    1.832630] PTP clock support registered
[    1.834227] ACPI: bus type USB registered
[    1.834261] usbcore: registered new interface driver usbfs
[    1.834276] usbcore: registered new interface driver hub
[    1.834316] usbcore: registered new device driver usb
[    1.834418] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.834419] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.834688] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.835035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.835225] ehci-pci: EHCI PCI platform driver
[    1.835512] sdhci: Secure Digital Host Controller Interface driver
[    1.835513] sdhci: Copyright(c) Pierre Ossman
[    1.836048] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.836868] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[    1.836874] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 1
[    1.837069] xhci_hcd 0000:0e:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    1.837337] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.837340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.837341] usb usb1: Product: xHCI Host Controller
[    1.837343] usb usb1: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
[    1.837344] usb usb1: SerialNumber: 0000:0e:00.0
[    1.837507] hub 1-0:1.0: USB hub found
[    1.837521] hub 1-0:1.0: 2 ports detected
[    1.837662] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[    1.837665] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 2
[    1.837827] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    1.840496] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.840527] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.840529] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.840531] usb usb2: Product: xHCI Host Controller
[    1.840532] usb usb2: Manufacturer: Linux 4.9.0-6-amd64 xhci-hcd
[    1.840534] usb usb2: SerialNumber: 0000:0e:00.0
[    1.840706] hub 2-0:1.0: USB hub found
[    1.840719] hub 2-0:1.0: 2 ports detected
[    1.846076] SCSI subsystem initialized
[    1.849115] libata version 3.00 loaded.
[    1.849418] AVX version of gcm_enc/dec engaged.
[    1.849419] AES CTR mode by8 optimization enabled
[    1.939011] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    2.042379] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:15:38:77
[    2.042384] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.042449] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    2.042726] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.042738] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.042759] ehci-pci 0000:00:1a.0: debug port 2
[    2.044215] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    2.046685] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.046703] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf262a000
[    2.060995] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.061238] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.061242] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.061245] usb usb3: Product: EHCI Host Controller
[    2.061248] usb usb3: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[    2.061251] usb usb3: SerialNumber: 0000:00:1a.0
[    2.061739] hub 3-0:1.0: USB hub found
[    2.061756] hub 3-0:1.0: 3 ports detected
[    2.062324] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.062335] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    2.062357] ehci-pci 0000:00:1d.0: debug port 2
[    2.066272] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.066310] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2629000
[    2.081030] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.081179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.081185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.081189] usb usb4: Product: EHCI Host Controller
[    2.081192] usb usb4: Manufacturer: Linux 4.9.0-6-amd64 ehci_hcd
[    2.081196] usb usb4: SerialNumber: 0000:00:1d.0
[    2.081816] hub 4-0:1.0: USB hub found
[    2.081848] hub 4-0:1.0: 3 ports detected
[    2.082846] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.085427] ahci 0000:00:1f.2: version 3.0
[    2.085903] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.096109] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    2.096118] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    2.119559] scsi host0: ahci
[    2.119977] scsi host1: ahci
[    2.120302] scsi host2: ahci
[    2.120617] scsi host3: ahci
[    2.120928] scsi host4: ahci
[    2.121210] scsi host5: ahci
[    2.121379] ata1: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628100 irq 32
[    2.121384] ata2: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628180 irq 32
[    2.121386] ata3: DUMMY
[    2.121388] ata4: DUMMY
[    2.121393] ata5: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628300 irq 32
[    2.121395] ata6: DUMMY
[    2.389010] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.409007] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.424936] tsc: Refined TSC clocksource calibration: 2790.936 MHz
[    2.424953] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x283ace7a2b7, max_idle_ns: 440795264475 ns
[    2.436461] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.449787] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.449795] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.449800] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.474428] ata1.00: ATA-8: SAMSUNG MZ7PC128HAFU-000L1, CXM04L1Q, max UDMA/133
[    2.474434] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.505935] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.505942] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.505947] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.530639] ata1.00: configured for UDMA/133
[    2.531495] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZ7PC128 4L1Q PQ: 0 ANSI: 5
[    2.537831] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    2.537836] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.538552] hub 3-1:1.0: USB hub found
[    2.538738] hub 3-1:1.0: 6 ports detected
[    2.557755] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    2.557761] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.558451] hub 4-1:1.0: USB hub found
[    2.558658] hub 4-1:1.0: 8 ports detected
[    2.612004] random: fast init done
[    2.725961] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[    2.766363] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[    2.828982] usb 3-1.2: new full-speed USB device number 3 using ehci-pci
[    2.844984] usb 4-1.4: new high-speed USB device number 3 using ehci-pci
[    2.845025] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[    2.845043] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.888673] ata2: SATA link down (SStatus 0 SControl 300)
[    2.895299] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.947076] usb 3-1.2: New USB device found, idVendor=1395, idProduct=002d
[    2.947082] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.947085] usb 3-1.2: Product: Sennheiser BTD 800 USB for Lync
[    2.953053] hidraw: raw HID events driver (C) Jiri Kosina
[    2.958092] usbcore: registered new interface driver usbhid
[    2.958095] usbhid: USB HID core driver
[    2.965318] input: Sennheiser BTD 800 USB for Lync as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.3/0003:1395:002D.0001/input/input4
[    2.967130] usb 4-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[    2.967135] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.967148] usb 4-1.4: Product: F5521gw
[    2.967150] usb 4-1.4: Manufacturer: Lenovo
[    2.967153] usb 4-1.4: SerialNumber: 0D8FFD2C102A46B0
[    3.025281] hid-generic 0003:1395:002D.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Sennheiser BTD 800 USB for Lync] on usb-0000:00:1a.0-1.2/input3
[    3.029016] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[    3.144276] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    3.144283] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.144287] usb 3-1.4: Product: Broadcom Bluetooth Device
[    3.144291] usb 3-1.4: Manufacturer: Broadcom Corp
[    3.144295] usb 3-1.4: SerialNumber: 402CF4F6F201
[    3.204912] ata5: SATA link down (SStatus 0 SControl 300)
[    3.211849] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    3.212060] sd 0:0:0:0: [sda] Write Protect is off
[    3.212068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.212172] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.228958] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[    3.253683]  sda: sda1 sda2 < sda5 sda6 >
[    3.255347] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.344736] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    3.344741] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.344745] usb 3-1.6: Product: Integrated Camera
[    3.344748] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    3.449230] clocksource: Switched to clocksource tsc
[    3.629655] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.725791] PM: Starting manual resume from disk
[    3.725798] PM: Hibernation image partition 8:5 present
[    3.725800] PM: Looking for hibernation image.
[    3.731184] PM: Image not found (code -22)
[    3.731188] PM: Hibernation image not present or could not be loaded.
[    3.879988] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    4.192141] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.652249] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.734805] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.735152] systemd[1]: Detected architecture x86-64.
[    5.742440] systemd[1]: Set hostname to <debian-x220>.
[    7.469509] systemd[1]: Created slice System Slice.
[    7.470780] systemd[1]: Mounting Debug File System...
[    7.470994] systemd[1]: Listening on Syslog Socket.
[    7.471230] systemd[1]: Listening on Journal Audit Socket.
[    7.471352] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.471494] systemd[1]: Listening on Journal Socket.
[    7.472753] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.542249] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.580312] lp: driver loaded but no devices found
[    7.586926] ppdev: user-space parallel port driver
[    7.601873] systemd-journald[222]: Received request to flush runtime journal from PID 1
[    8.422563] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.423035] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20160831/utaddress-247)
[    8.423041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.423044] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[    8.423047] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.423048] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[    8.423052] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.423052] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20160831/utaddress-247)
[    8.423055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.423056] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.430612] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    8.430748] ACPI: Lid Switch [LID]
[    8.430809] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[    8.430812] ACPI: Sleep Button [SLPB]
[    8.430881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    8.430883] ACPI: Power Button [PWRF]
[    8.480520] [drm] Initialized
[    8.482011] wmi: Mapper loaded
[    8.486198] Non-volatile memory driver v1.3
[    8.488816] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    8.488817] thinkpad_acpi: [url]http://ibm-acpi.sf.net/[/url]
[    8.488818] thinkpad_acpi: ThinkPad BIOS 8DET73WW (1.43 ), EC unknown
[    8.488818] thinkpad_acpi: Lenovo ThinkPad X220, model 4290KT2
[    8.495154] thinkpad_acpi: radio switch found; radios are enabled
[    8.495232] ACPI: Battery Slot [BAT0] (battery present)
[    8.495299] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    8.495411] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    8.495411] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    8.496415] ACPI: AC Adapter [AC] (off-line)
[    8.499103] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.502107] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    8.502901] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[    8.503209] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    8.505280] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[    8.518721] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    8.535750] Intel(R) Wireless WiFi driver for Linux
[    8.535751] Copyright(c) 2003- 2015 Intel Corporation
[    8.535932] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    8.537484] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    8.537485] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    8.537486] RAPL PMU: hw unit of domain package 2^-16 Joules
[    8.537487] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    8.553206] [drm] Memory usable by graphics device = 2048M
[    8.553209] [drm] Replacing VGA console driver
[    8.553737] Console: switching to colour dummy device 80x25
[    8.559946] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.559947] [drm] Driver supports precise vblank timestamp query.
[    8.560161] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.589278] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[    8.589752] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    8.589755] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.589757] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    8.589758] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[    8.589759] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[    8.589761] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[    8.589763] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[    8.589764] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[    8.591075] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[    8.605268] iTCO_vendor_support: vendor-support=0
[    8.607771] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[    8.608048] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    8.608421] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.608473] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.610078] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.689083] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    8.689085] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    8.689086] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    8.689087] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    8.691418] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    8.713170] intel_rapl: Found RAPL domain package
[    8.713171] intel_rapl: Found RAPL domain core
[    8.713172] intel_rapl: Found RAPL domain uncore
[    8.713178] intel_rapl: RAPL package 0 domain package locked by BIOS
[    8.715157] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.769928] Adding 2861052k swap on /dev/sda5.  Priority:-1 extents:1 across:2861052k SSFS
[    8.800164] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    8.807848] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    8.807968] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[    8.808110] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.808116] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    8.995119] fbcon: inteldrmfb (fb0) is primary device
[    9.651809] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    9.732114] Console: switching to colour frame buffer device 170x48
[    9.754936] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.780262] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.781131] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.781273] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.781411] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.781541] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    9.781673] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    9.781816] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    9.781945] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   10.085894] Bluetooth: Core ver 2.22
[   10.085912] NET: Registered protocol family 31
[   10.085914] Bluetooth: HCI device and connection manager initialized
[   10.085919] Bluetooth: HCI socket layer initialized
[   10.085922] Bluetooth: L2CAP socket layer initialized
[   10.085931] Bluetooth: SCO socket layer initialized
[   10.173901] usbcore: registered new interface driver btusb
[   10.193319] media: Linux media interface: v0.10
[   10.210203] cdc_wdm 4-1.4:1.5: cdc-wdm1: USB WDM device
[   10.213155] cdc_wdm 4-1.4:1.8: cdc-wdm2: USB WDM device
[   10.213290] usbcore: registered new interface driver cdc_wdm
[   10.214431] cdc_acm 4-1.4:1.1: ttyACM0: USB ACM device
[   10.215151] Linux video capture interface: v2.00
[   10.216406] cdc_acm 4-1.4:1.3: ttyACM1: USB ACM device
[   10.217156] cdc_acm 4-1.4:1.9: ttyACM2: USB ACM device
[   10.217603] usbcore: registered new interface driver cdc_acm
[   10.217604] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   10.249730] cdc_ncm 4-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[   10.250240] cdc_ncm 4-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[   10.250271] usbcore: registered new interface driver cdc_ncm
[   10.255866] usbcore: registered new interface driver cdc_mbim
[   10.265350] cdc_ncm 4-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[   10.290203] usbcore: registered new interface driver snd-usb-audio
[   10.325494] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[   10.327739] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[   10.327742] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[   10.327744] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[   10.327824] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input19
[   10.327882] usbcore: registered new interface driver uvcvideo
[   10.327882] USB Video Class driver (1.1.1)
[   10.925503] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.925506] Bluetooth: BNEP filters: protocol multicast
[   10.925514] Bluetooth: BNEP socket layer initialized
[   11.553847] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   11.801649] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   11.815444] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   11.816868] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   11.817097] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   11.817186] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   12.098762] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   12.098995] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   12.099087] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   12.183268] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   12.191518] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   12.191750] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   12.191842] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   12.472454] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   12.472699] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   12.472831] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   12.558270] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   12.976331] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   16.649861] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   16.650137] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   16.650240] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   16.932236] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   16.932487] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   16.932592] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   17.018415] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   17.087538] wlp3s0: authenticate with 24:95:04:ce:ce:84
[   17.092445] wlp3s0: send auth to 24:95:04:ce:ce:84 (try 1/3)
[   17.095195] wlp3s0: authenticated
[   17.096721] wlp3s0: associate with 24:95:04:ce:ce:84 (try 1/3)
[   17.100321] wlp3s0: RX AssocResp from 24:95:04:ce:ce:84 (capab=0x411 status=0 aid=6)
[   17.102469] wlp3s0: associated
[   18.171935] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   18.875096] thinkpad_ec: loading out-of-tree module taints kernel.
[   18.875753] thinkpad_ec: thinkpad_ec 0.42 loaded.
[   18.890639] tp_smapi 0.42 loading...
[   18.890809] tp_smapi successfully loaded (smapi_port=0xb2).
[   36.462008] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   36.462016] Bluetooth: HIDP socket layer initialized
[   36.463831] hid-generic 0005:046D:B010.0002: unknown main item tag 0x0
[   36.464073] input: Bluetooth Mouse M557 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0/hci0:11/0005:046D:B010.0002/input/input20
[   36.465492] hid-generic 0005:046D:B010.0002: input,hidraw1: BLUETOOTH HID v10.01 Mouse [Bluetooth Mouse M557] on 40:2c:f4:f6:f2:01
[   37.763694] Bluetooth: RFCOMM TTY layer initialized
[   37.763708] Bluetooth: RFCOMM socket layer initialized
[   37.763719] Bluetooth: RFCOMM ver 1.11
[   39.403138] random: crng init done



Edit : ajout des balises codes avec le bouton "autre code"

Hors ligne

#3 02-04-2018 15:19:55

Blob
Membre
Distrib. : Arch
Noyau : 4.16.6-1
(G)UI : KDE - 5.12.4
Inscription : 18-03-2018

Re : Lag navigation web [chipset i915]

Salut,

Et moi qui pensais abuser parfois quand j'éditais des message en rajoutant une ligne big_smile

Ca me fait penser à un "problème" que j'ai eu recemment du même ordre.
Le problème est apparu après avoir installé une extension à ton navigateur ?

Ca se met à être lent dès le lancement ou quelques temps après ?

https://lescahiersdudebutant.fr/
Iron Maiden's gonna get you, no matter how far

Hors ligne

#4 15-05-2018 01:12:45

Richard_Denis
Membre
Lieu : Chantilly
Distrib. : Debian Stretch
Noyau : 4.9
(G)UI : xfce
Inscription : 10-04-2016

Re : Lag navigation web [chipset i915]

Salut,
Non c'est "natif" à priori c'est connu sur ce chipset, beaucoup de sources anglo-saxonnes.
je pense qu'il doit y avoir un délire de rafraichissement car je ne l'observe pas sur KDE et gnome mais uniquement xfce et mate
Merci de ta réponse



Blob a écrit :

Salut,

Et moi qui pensais abuser parfois quand j'éditais des message en rajoutant une ligne big_smile

Ca me fait penser à un "problème" que j'ai eu recemment du même ordre.
Le problème est apparu après avoir installé une extension à ton navigateur ?

Ca se met à être lent dès le lancement ou quelques temps après ?

Hors ligne

#5 15-05-2018 12:25:26

hyrr0
Membre
Distrib. : Debain stable
Noyau : 4.9
(G)UI : KDE 5.8 LTS
Inscription : 12-01-2018

Re : Lag navigation web [chipset i915]

Salut,

ça s'appelle du "Window Tearing" en anglais. Tu l'as pas sous KDE et Gnome parce qu'ils utilisent tout deux un compositeur pour gérer le contenu (une sorte de gros buffer graphique pour anticiper les frames et gérer les effets graphiques). Sous Mate et XFCE, c'est rudimentaire et assez mauvais... tu en fait l'expérience aujourd'hui.

La solution : utiliser un autre compositeur.

Sous XFCE : Désactiver le compositeur par défaut (on le trouve dans les options avec une icone de baguette magique. Désolé, j'ai pas mon PC sous la main pour être plus précis). Et installer un autre et le lancer :

sudo apt install compton



Ensuite, tu peux lancer compton

compton&



Et normalement le souci devrait être résolu.

La solution finale étant d'ajouter le lancement de compton au démarrage pour ne plus avoir le problème. Si tu te renseigne sur Compton, tu verras qu'on peut même personaliser les effets via un fichier de configuration. On arrive à la fin à un rendu vraiment plus moderne. C'est certes, du gadget, mais ça fait plaisir aux yeux smile enfin moi, j'aime bien ^^

Dernière modification par hyrr0 (15-05-2018 12:26:20)

Hors ligne

#6 15-05-2018 13:19:44

robert2a
Membre
Lieu : France
Inscription : 15-11-2014

Re : Lag navigation web [chipset i915]

Bonjour

tu peu vérifier la prise en charge de ton gpu intel i915


lsmod | egrep  'i915'
 




grep rendering /var/log/Xorg.0.log
 




grep acceleration /var/log/Xorg.0.log
 




lspci -nnk | grep -iA3 vga
 



j'utilise très peu (ou pas du tout ) les gpu intel , mais de mémoire , l utilisation d un xorg.conf (avec les bonnes options ) peu améliorer les choses (a voir sur le net )

mais il est clair qu' avec le contenu des pages web en 2018 , ce gpu peu montrer ses limites  roll

nota: j'ai le meme résultat quand mon gpu bosse a 100% et que je suis sur le net ( manque de ressources ).
mais bon j' utilise Mate  tongue   wink

ps: rien a voir avec du Tearing , qui est un déchirement de l'image , selon ta description (en #1 )

Hors ligne

#7 16-05-2018 12:09:49

raleur
Membre
Inscription : 03-10-2014

Re : Lag navigation web [chipset i915]

Vaudrait mieux poster tout le contenu de /var/log/Xorg.0.log, on fera le tri.

Hors ligne

#8 04-06-2018 16:37:46

d33p
Adhérent(e)
Lieu : Longwy
Distrib. : Debian testing buster 64bits
Noyau : Linux, en fonction des updates testing buster
(G)UI : GNOME, en fonction des updates testing buster
Inscription : 01-12-2015

Re : Lag navigation web [chipset i915]

hello,

si c'est bien sous firefox que tu navigues:
tu as testé en changeant l'option "use hardware acceleration" parfois si tu décoches cette option il y a du mieux.
egalement l'option "smooth scroling" à décocher car sur pas mal de machine j'ai vu que c'est pas smooth du tout, c'est même l'inverse big_smile

Et robert a raison

j'utilise très peu (ou pas du tout ) les gpu intel , mais de mémoire , l utilisation d un xorg.conf (avec les bonnes options ) peu améliorer les choses (a voir sur le net )


un petit fichier "/etc/X11/xorg.conf.d/20-intel.conf "
avec ces parametres de base dedans:

Section "Device"
  Identifier "Intel Graphics"
  Driver "Intel"
EndSection



+ penser à installer microcode intel + firmware liés à ta machine / intel

ça devrait le faire.

@+

JC


science sans conscience n'est que ruine de l'âme...
Location:
https://framacarte.org/en/map/debian-fa … 78/5.76506

Hors ligne

#9 23-06-2018 00:15:40

Richard_Denis
Membre
Lieu : Chantilly
Distrib. : Debian Stretch
Noyau : 4.9
(G)UI : xfce
Inscription : 10-04-2016

Re : Lag navigation web [chipset i915]

Bonjour à tous

voici mon Xorg.0.log :


[   875.229]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[   875.229] X Protocol Version 11, Revision 0
[   875.229] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[   875.229] Current Operating System: Linux x220 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) x86_64
[   875.229] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=b25844e9-5c75-454c-a680-68a7cb8ad952 ro quiet
[   875.230] Build Date: 16 October 2017  08:19:45AM
[   875.230] xorg-server 2:1.19.2-1+deb9u2 ([url]https://www.debian.org/support[/url])
[   875.230] Current version of pixman: 0.34.0
[   875.230]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[   875.230] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   875.230] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 23 00:07:28 2018
[   875.230] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   875.231] (==) No Layout section.  Using the first Screen section.
[   875.231] (==) No screen section available. Using defaults.
[   875.231] (**) |-->Screen "Default Screen Section" (0)
[   875.231] (**) |   |-->Monitor "<default monitor>"
[   875.231] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   875.231] (==) Automatically adding devices
[   875.231] (==) Automatically enabling devices
[   875.231] (==) Automatically adding GPU devices
[   875.231] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   875.231] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   875.231]     Entry deleted from font path.
[   875.231] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[   875.231] (==) ModulePath set to "/usr/lib/xorg/modules"
[   875.231] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   875.231] (II) Loader magic: 0x55b8d8ac0e00
[   875.231] (II) Module ABI versions:
[   875.231]     X.Org ANSI C Emulation: 0.4
[   875.231]     X.Org Video Driver: 23.0
[   875.231]     X.Org XInput driver : 24.1
[   875.231]     X.Org Server Extension : 10.0
[   875.233] (++) using VT number 7

[   875.233] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   875.235] (II) xfree86: Adding drm device (/dev/dri/card0)
[   875.240] (--) PCI:*(0:0:2:0) 8086:0116:17aa:21da rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   875.240] (II) LoadModule: "glx"
[   875.240] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   875.243] (II) Module glx: vendor="X.Org Foundation"
[   875.243]     compiled for 1.19.2, module version = 1.0.0
[   875.243]     ABI class: X.Org Server Extension, version 10.0
[   875.243] (==) Matched modesetting as autoconfigured driver 0
[   875.243] (==) Matched fbdev as autoconfigured driver 1
[   875.243] (==) Matched vesa as autoconfigured driver 2
[   875.243] (==) Assigned the driver to the xf86ConfigLayout
[   875.243] (II) LoadModule: "modesetting"
[   875.243] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   875.243] (II) Module modesetting: vendor="X.Org Foundation"
[   875.243]     compiled for 1.19.2, module version = 1.19.2
[   875.243]     Module class: X.Org Video Driver
[   875.243]     ABI class: X.Org Video Driver, version 23.0
[   875.243] (II) LoadModule: "fbdev"
[   875.243] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   875.244] (II) Module fbdev: vendor="X.Org Foundation"
[   875.244]     compiled for 1.19.0, module version = 0.4.4
[   875.244]     Module class: X.Org Video Driver
[   875.244]     ABI class: X.Org Video Driver, version 23.0
[   875.244] (II) LoadModule: "vesa"
[   875.244] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   875.244] (II) Module vesa: vendor="X.Org Foundation"
[   875.244]     compiled for 1.19.0, module version = 2.3.4
[   875.244]     Module class: X.Org Video Driver
[   875.244]     ABI class: X.Org Video Driver, version 23.0
[   875.244] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   875.244] (II) FBDEV: driver for framebuffer: fbdev
[   875.244] (II) VESA: driver for VESA chipsets: vesa
[   875.253] (II) modeset(0): using drv /dev/dri/card0
[   875.253] (WW) Falling back to old probe method for fbdev
[   875.253] (II) Loading sub module "fbdevhw"
[   875.253] (II) LoadModule: "fbdevhw"
[   875.253] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   875.254] (II) Module fbdevhw: vendor="X.Org Foundation"
[   875.254]     compiled for 1.19.2, module version = 0.0.2
[   875.254]     ABI class: X.Org Video Driver, version 23.0
[   875.254] (WW) Falling back to old probe method for vesa
[   875.254] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   875.254] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   875.254] (==) modeset(0): RGB weight 888
[   875.254] (==) modeset(0): Default visual is TrueColor
[   875.254] (II) Loading sub module "glamoregl"
[   875.254] (II) LoadModule: "glamoregl"
[   875.254] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   875.264] (II) Module glamoregl: vendor="X.Org Foundation"
[   875.264]     compiled for 1.19.2, module version = 1.0.0
[   875.264]     ABI class: X.Org ANSI C Emulation, version 0.4
[   875.264] (II) glamor: OpenGL accelerated X.org driver based.
[   875.297] (II) glamor: EGL version 1.4 (DRI2):
[   875.300] (II) modeset(0): glamor initialized
[   875.300] (II) modeset(0): Output LVDS-1 has no monitor section
[   875.301] (II) modeset(0): Output VGA-1 has no monitor section
[   875.516] (II) modeset(0): Output HDMI-1 has no monitor section
[   875.516] (II) modeset(0): Output DP-1 has no monitor section
[   875.518] (II) modeset(0): Output HDMI-2 has no monitor section
[   875.520] (II) modeset(0): Output HDMI-3 has no monitor section
[   875.520] (II) modeset(0): Output DP-2 has no monitor section
[   875.520] (II) modeset(0): Output DP-3 has no monitor section
[   875.520] (II) modeset(0): EDID for output LVDS-1
[   875.520] (II) modeset(0): Manufacturer: LGD  Model: 2d3  Serial#: 0
[   875.520] (II) modeset(0): Year: 2011  Week: 0
[   875.520] (II) modeset(0): EDID Version: 1.3
[   875.520] (II) modeset(0): Digital Display Input
[   875.520] (II) modeset(0): Max Image Size [cm]: horiz.: 28  vert.: 16
[   875.520] (II) modeset(0): Gamma: 2.20
[   875.520] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[   875.520] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   875.520] (II) modeset(0): First detailed timing is preferred mode
[   875.520] (II) modeset(0): redX: 0.586 redY: 0.345   greenX: 0.340 greenY: 0.559
[   875.520] (II) modeset(0): blueX: 0.158 blueY: 0.127   whiteX: 0.313 whiteY: 0.329
[   875.520] (II) modeset(0): Manufacturer's mask: 0
[   875.520] (II) modeset(0): Supported detailed timing:
[   875.520] (II) modeset(0): clock: 74.8 MHz   Image Size:  277 x 156 mm
[   875.520] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1578 h_border: 0
[   875.520] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[   875.520] (II) modeset(0):  LG Display
[   875.520] (II) modeset(0):  LP125WH2-TLB1
[   875.520] (II) modeset(0): EDID (in hex):
[   875.520] (II) modeset(0):     00ffffffffffff0030e4d30200000000
[   875.520] (II) modeset(0):     00150103801c1078ea10a59658578f28
[   875.520] (II) modeset(0):     20505400000001010101010101010101
[   875.520] (II) modeset(0):     010101010101381d56d4500016303020
[   875.520] (II) modeset(0):     2500159c1000001b0000000000000000
[   875.520] (II) modeset(0):     00000000000000000000000000fe004c
[   875.520] (II) modeset(0):     4720446973706c61790a2020000000fe
[   875.520] (II) modeset(0):     004c503132355748322d544c423100f7
[   875.521] (II) modeset(0): Printing probed modes for output LVDS-1
[   875.521] (II) modeset(0): Modeline "1366x768"x60.0   74.80  1366 1414 1446 1578  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   875.521] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   875.521] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   875.521] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   875.521] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   875.521] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   875.521] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   875.521] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   875.521] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   875.521] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   875.521] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   875.521] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   875.521] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   875.521] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   875.521] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   875.521] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[   875.521] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   875.521] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   875.521] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[   875.521] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   875.521] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   875.521] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[   875.521] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[   875.521] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[   875.521] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   875.521] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   875.521] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   875.521] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   875.523] (II) modeset(0): EDID for output VGA-1
[   875.736] (II) modeset(0): EDID for output HDMI-1
[   875.736] (II) modeset(0): EDID for output DP-1
[   875.737] (II) modeset(0): EDID for output HDMI-2
[   875.739] (II) modeset(0): EDID for output HDMI-3
[   875.739] (II) modeset(0): EDID for output DP-2
[   875.739] (II) modeset(0): EDID for output DP-3
[   875.739] (II) modeset(0): Output LVDS-1 connected
[   875.739] (II) modeset(0): Output VGA-1 disconnected
[   875.739] (II) modeset(0): Output HDMI-1 disconnected
[   875.739] (II) modeset(0): Output DP-1 disconnected
[   875.739] (II) modeset(0): Output HDMI-2 disconnected
[   875.739] (II) modeset(0): Output HDMI-3 disconnected
[   875.739] (II) modeset(0): Output DP-2 disconnected
[   875.739] (II) modeset(0): Output DP-3 disconnected
[   875.739] (II) modeset(0): Using exact sizes for initial modes
[   875.739] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[   875.739] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   875.739] (==) modeset(0): DPI set to (96, 96)
[   875.739] (II) Loading sub module "fb"
[   875.739] (II) LoadModule: "fb"
[   875.740] (II) Loading /usr/lib/xorg/modules/libfb.so
[   875.740] (II) Module fb: vendor="X.Org Foundation"
[   875.740]     compiled for 1.19.2, module version = 1.0.0
[   875.740]     ABI class: X.Org ANSI C Emulation, version 0.4
[   875.740] (II) UnloadModule: "fbdev"
[   875.740] (II) Unloading fbdev
[   875.740] (II) UnloadSubModule: "fbdevhw"
[   875.740] (II) Unloading fbdevhw
[   875.740] (II) UnloadModule: "vesa"
[   875.740] (II) Unloading vesa
[   875.740] (==) Depth 24 pixmap format is 32 bpp
[   875.883] (==) modeset(0): Backing store enabled
[   875.883] (==) modeset(0): Silken mouse enabled
[   875.883] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   875.884] (==) modeset(0): DPMS enabled
[   875.884] (II) modeset(0): [DRI2] Setup complete
[   875.884] (II) modeset(0): [DRI2]   DRI driver: i965
[   875.884] (II) modeset(0): [DRI2]   VDPAU driver: i965
[   875.884] (--) RandR disabled
[   875.887] (II) SELinux: Disabled on system
[   875.898] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   875.898] (II) AIGLX: enabled GLX_ARB_create_context
[   875.898] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   875.898] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   875.898] (II) AIGLX: enabled GLX_INTEL_swap_event
[   875.898] (II) AIGLX: enabled GLX_SGI_swap_control
[   875.898] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   875.898] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   875.898] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   875.898] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   875.898] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   875.898] (II) AIGLX: Loaded and initialized i965
[   875.898] (II) GLX: Initialized DRI2 GL provider for screen 0
[   875.900] (II) modeset(0): Damage tracking initialized
[   875.900] (II) modeset(0): Setting screen physical size to 361 x 203
[   875.978] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   875.978] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   875.978] (II) LoadModule: "libinput"
[   875.978] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   875.981] (II) Module libinput: vendor="X.Org Foundation"
[   875.981]     compiled for 1.19.0, module version = 0.23.0
[   875.981]     Module class: X.Org XInput Driver
[   875.981]     ABI class: X.Org XInput driver, version 24.1
[   875.981] (II) Using input driver 'libinput' for 'Power Button'
[   875.981] (**) Power Button: always reports core events
[   875.981] (**) Option "Device" "/dev/input/event5"
[   875.982] (**) Option "_source" "server/udev"
[   875.982] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[   875.982] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[   875.996] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[   875.996] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   875.996] (**) Option "xkb_model" "pc105"
[   875.996] (**) Option "xkb_layout" "fr"
[   875.996] (**) Option "xkb_variant" "latin9"
[   876.031] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[   876.031] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[   876.032] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[   876.032] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   876.032] (II) Using input driver 'libinput' for 'Video Bus'
[   876.032] (**) Video Bus: always reports core events
[   876.032] (**) Option "Device" "/dev/input/event10"
[   876.032] (**) Option "_source" "server/udev"
[   876.033] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[   876.033] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[   876.052] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event10"
[   876.052] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   876.052] (**) Option "xkb_model" "pc105"
[   876.052] (**) Option "xkb_layout" "fr"
[   876.052] (**) Option "xkb_variant" "latin9"
[   876.053] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[   876.054] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[   876.054] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   876.055] (II) No input driver specified, ignoring this device.
[   876.055] (II) This device may have been added with another device file.
[   876.055] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   876.055] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   876.056] (II) Using input driver 'libinput' for 'Sleep Button'
[   876.056] (**) Sleep Button: always reports core events
[   876.056] (**) Option "Device" "/dev/input/event4"
[   876.056] (**) Option "_source" "server/udev"
[   876.056] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   876.056] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   876.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event4"
[   876.076] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   876.076] (**) Option "xkb_model" "pc105"
[   876.076] (**) Option "xkb_layout" "fr"
[   876.076] (**) Option "xkb_variant" "latin9"
[   876.077] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   876.077] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   876.080] (II) config/udev: Adding input device YSTEK G Mouse (/dev/input/event2)
[   876.080] (**) YSTEK G Mouse: Applying InputClass "libinput pointer catchall"
[   876.080] (II) Using input driver 'libinput' for 'YSTEK G Mouse'
[   876.080] (**) YSTEK G Mouse: always reports core events
[   876.080] (**) Option "Device" "/dev/input/event2"
[   876.080] (**) Option "_source" "server/udev"
[   876.141] (II) input device 'YSTEK G Mouse', /dev/input/event2 is tagged by udev as: Mouse
[   876.141] (II) input device 'YSTEK G Mouse', /dev/input/event2 is a pointer caps
[   876.172] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:276D:1160.0001/input/input4/event2"
[   876.172] (II) XINPUT: Adding extended input device "YSTEK G Mouse" (type: MOUSE, id 9)
[   876.172] (**) Option "AccelerationScheme" "none"
[   876.173] (**) YSTEK G Mouse: (accel) selected scheme none/0
[   876.173] (**) YSTEK G Mouse: (accel) acceleration factor: 2.000
[   876.173] (**) YSTEK G Mouse: (accel) acceleration threshold: 4
[   876.233] (II) input device 'YSTEK G Mouse', /dev/input/event2 is tagged by udev as: Mouse
[   876.233] (II) input device 'YSTEK G Mouse', /dev/input/event2 is a pointer caps
[   876.234] (II) config/udev: Adding input device YSTEK G Mouse (/dev/input/mouse1)
[   876.234] (II) No input driver specified, ignoring this device.
[   876.234] (II) This device may have been added with another device file.
[   876.236] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9)
[   876.236] (**) Integrated Camera: Applying InputClass "libinput keyboard catchall"
[   876.236] (II) Using input driver 'libinput' for 'Integrated Camera'
[   876.236] (**) Integrated Camera: always reports core events
[   876.236] (**) Option "Device" "/dev/input/event9"
[   876.236] (**) Option "_source" "server/udev"
[   876.237] (II) input device 'Integrated Camera', /dev/input/event9 is tagged by udev as: Keyboard
[   876.237] (II) input device 'Integrated Camera', /dev/input/event9 is a keyboard
[   876.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event9"
[   876.272] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[   876.272] (**) Option "xkb_model" "pc105"
[   876.272] (**) Option "xkb_layout" "fr"
[   876.272] (**) Option "xkb_variant" "latin9"
[   876.274] (II) input device 'Integrated Camera', /dev/input/event9 is tagged by udev as: Keyboard
[   876.274] (II) input device 'Integrated Camera', /dev/input/event9 is a keyboard
[   876.274] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[   876.274] (II) No input driver specified, ignoring this device.
[   876.274] (II) This device may have been added with another device file.
[   876.275] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[   876.275] (II) No input driver specified, ignoring this device.
[   876.275] (II) This device may have been added with another device file.
[   876.276] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event13)
[   876.276] (II) No input driver specified, ignoring this device.
[   876.276] (II) This device may have been added with another device file.
[   876.277] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event14)
[   876.277] (II) No input driver specified, ignoring this device.
[   876.277] (II) This device may have been added with another device file.
[   876.277] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[   876.277] (II) No input driver specified, ignoring this device.
[   876.277] (II) This device may have been added with another device file.
[   876.278] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[   876.278] (II) No input driver specified, ignoring this device.
[   876.278] (II) This device may have been added with another device file.
[   876.279] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[   876.279] (II) No input driver specified, ignoring this device.
[   876.279] (II) This device may have been added with another device file.
[   876.279] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[   876.279] (II) No input driver specified, ignoring this device.
[   876.279] (II) This device may have been added with another device file.
[   876.281] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   876.281] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   876.281] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   876.281] (**) AT Translated Set 2 keyboard: always reports core events
[   876.281] (**) Option "Device" "/dev/input/event0"
[   876.281] (**) Option "_source" "server/udev"
[   876.282] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   876.282] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   876.320] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   876.320] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   876.320] (**) Option "xkb_model" "pc105"
[   876.320] (**) Option "xkb_layout" "fr"
[   876.320] (**) Option "xkb_variant" "latin9"
[   876.321] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   876.321] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   876.322] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[   876.322] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   876.322] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[   876.323] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   876.323] (**) Option "Device" "/dev/input/event1"
[   876.323] (**) Option "_source" "server/udev"
[   876.323] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[   876.323] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[   876.360] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[   876.360] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   876.361] (**) Option "AccelerationScheme" "none"
[   876.361] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   876.361] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   876.361] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   876.362] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[   876.362] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[   876.362] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   876.362] (II) No input driver specified, ignoring this device.
[   876.362] (II) This device may have been added with another device file.
[   876.363] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[   876.363] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[   876.363] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[   876.363] (**) TPPS/2 IBM TrackPoint: always reports core events
[   876.363] (**) Option "Device" "/dev/input/event6"
[   876.364] (**) Option "_source" "server/udev"
[   876.364] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event6 is tagged by udev as: Mouse Pointingstick
[   876.364] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event6 is a pointer caps
[   876.408] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input3/event6"
[   876.408] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[   876.408] (**) Option "AccelerationScheme" "none"
[   876.408] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[   876.408] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   876.408] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   876.409] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event6 is tagged by udev as: Mouse Pointingstick
[   876.409] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event6 is a pointer caps
[   876.410] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[   876.410] (II) No input driver specified, ignoring this device.
[   876.410] (II) This device may have been added with another device file.
[   876.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   876.411] (II) No input driver specified, ignoring this device.
[   876.411] (II) This device may have been added with another device file.
[   876.412] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event8)
[   876.412] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[   876.412] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[   876.413] (**) ThinkPad Extra Buttons: always reports core events
[   876.413] (**) Option "Device" "/dev/input/event8"
[   876.413] (**) Option "_source" "server/udev"
[   876.413] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is tagged by udev as: Keyboard
[   876.413] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is a keyboard
[   876.432] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event8"
[   876.432] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[   876.432] (**) Option "xkb_model" "pc105"
[   876.432] (**) Option "xkb_layout" "fr"
[   876.432] (**) Option "xkb_variant" "latin9"
[   876.433] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is tagged by udev as: Keyboard
[   876.433] (II) input device 'ThinkPad Extra Buttons', /dev/input/event8 is a keyboard
[   883.683] (II) modeset(0): EDID vendor "LGD", prod id 723
[   883.683] (II) modeset(0): Printing DDC gathered Modelines:
[   883.683] (II) modeset(0): Modeline "1366x768"x0.0   74.80  1366 1414 1446 1578  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   883.971] (II) modeset(0): EDID vendor "LGD", prod id 723
[   883.971] (II) modeset(0): Printing DDC gathered Modelines:
[   883.971] (II) modeset(0): Modeline "1366x768"x0.0   74.80  1366 1414 1446 1578  768 770 775 790 +hsync -vsync (47.4 kHz eP)
 




Merci à tous

Dernière modification par Richard_Denis (23-06-2018 00:21:41)

Hors ligne

#10 24-06-2018 18:30:42

Richard_Denis
Membre
Lieu : Chantilly
Distrib. : Debian Stretch
Noyau : 4.9
(G)UI : xfce
Inscription : 10-04-2016

Re : Lag navigation web [chipset i915]

Bonsoir à tous !
Sujet résolu grace à votre aide et en me documentant à droite et à gauche.

Pour le tearing :
J'ai créé un fichier /etc/X11/xorg.conf.d/20-intel.conf

Section "Device"
Identifier "Intel Graphics"
Driver "Intel"
Option "TearFree" "true"
EndSection



Pour le lag lors du scroll sur firefox :
Jai désactivé use hardware acceleration et egalement l'option smooth scroling et ça fonctionne à merveille.

Merci à vous tous pour l'aide apportée

A plus

Dernière modification par Richard_Denis (03-07-2018 17:44:40)

Hors ligne

Pied de page des forums