Installation de thème [Résolu]

Userdebutant · 21-02-2019 18:01:57

Bonjour, j'aimerais installer d'autres thèmes (et ensuite icônes) que ceux proposés par défaut sur gnome ; seulement ça marche pas fort. J'ai l'extension user theme active, mais je n'arrive pas à installer les thèmes (par exemple https://www.gnome-look.org/p/1080099/)
Je décompresse le dossier et le colle dans /usr/share/themes sans résultat (c'est-à-dire que ça n'apparaît pas dans la liste de gnome-tweak-tools). Y a juste https://www.gnome-look.org/p/1080248/ que j'ai réussi à installer et qui fonctionne, mais pas très élégant. Y a un tuto dans la description, avec pas mal de commandes autres que copie dans usr share etc.
Voilà la liste de commandes (avec leur description, je copie colle la description) qu'il a fallu utiliser :
su

tar -zxvf Crunchy-themes.tar.gz -C /usr/share

Customization of the window-list extension in Gnome-shell
As we can't theme it, we have to change the original files. So we have to make copies of them before making the customization. In a terminal:

cd /usr/share/gnome-shell/extensions/window-list@gnome-shell-extensions.gcampax.github.com

cp classic.css classic_Origin.css

cp stylesheet.css stylesheet_Origin.css

cp classic_Crunchy.css classic.css

cp stylesheet_Crunchy.css stylesheet.css

Je vois pas à quoi sert la deuxième partie, ça fonctionne et c'est visiblement ça qui manque pour les autres thèmes. Y aurait moyen de transposer ces commandes pour d'autres thèmes, ou une autre méthode ?
Je sais pas trop si j'ai gtk2 ou 3, dans le doute j'ai surtout testé les thèmes de gtk2 (ceux que j'ai mis en lien sont des gtk2).
Merci !

Edit à toto : J'ai édité ton message pour le rendre plus lisible. Je te laisse cliquer sur le lien Modifier au bas à droite de ce post pour voir comment le bb-code est utilisé pour ça.
Voir le tuto : Le code, ça pique moins les yeux en couleur(Merci)

Dernière modification par Userdebutant (23-02-2019 16:08:40)

Lancelin · 22-02-2019 10:30:08

Salut !

Je ne sais pas si ça va beaucoup t'aider mais ça aura au moins le mérite de faire remonter ;o)
Autrefois (jadis...) j'utilisais un thème différent de celui par défaut. Je m'étais fait quelques explications, si tu veux jeter un œil... Il y a au moins une différence avec ton installation : je plaçais le thème dans ~/themes
C'est ici : http://ansozour.free.fr/Personnalisation.html
Bon courage

Userdebutant · 22-02-2019 21:30:57

Merci, mais ça ne marche pas mieux...
J'ai essayé la méthode avec ocs, qui m'installe bien les dossiers partout (j'ai le dossier du thème dans ./themes et dans /usr/share/themes), c'est plus pratique mais ça ne fonctionne pas non plus.
Je pense que c'est un truc en rapport avec les fichiers .css, mais je sais pas du tout comment toucher à ce genre de fichiers.

bendia · 22-02-2019 22:12:07

Salut

Pour info, le thème que tu montres à 10 ans et utilise GTK2, alors que Gnome3 utilises GTK3. C'est peut-être une explication ?

Userdebutant · 22-02-2019 22:17:01

Je pense pas : j'en ai essayé plusieurs, dont des gtk3 (https://www.gnome-look.org/p/1173113/ par exemple) qui semblent être encore d'usage.

Debian Alain · 22-02-2019 23:14:06

Userdebutant ,

j'ai fait des recherches .

trouvé ceci : pour l'installation et ceci : pour les thèmes

si çà peut aider ...

Userdebutant · 23-02-2019 12:04:45

Merci pour le premier site, il est intéressant.
J'ai fait une boulette apparemment : j'ai cliqué dans gnome-tweak-tools pour faire un changement d'icônes (y a finalement un pack qui était apparu). Je sais pas trop ce qui s'est passé (ce n'est pas impossible que le dossier du pack n'existait pas), mais ça a fait disparaître quasiment tous les icônes (il me reste les jeux préinstallés, libreoffice, paramètres, python, reportbug et deux autres logiciels que j'avais installés). Les programmes ne se lancent plus, pas d'accès au terminal, à firefox/chromium, à gnome-tweak-tools (ni même à ceux dont ils reste les icônes). Quand j'essaie de lancer un logiciel quelconque la session se ferme. Et démarrer la session sous System X11 Default/Plasma/Les autres version de Gnome ne change rien.
Y a moyen d'annuler tout ça ? Je pense qu'il suffirait d'annuler le changement d'icônes, remettre le pack par défaut. Mais j'ai pas accès au terminal, et je ne saurais pas quelle commande lancer.
Les extensions fonctionnent toujours, et xscreensaver (un logiciel pour changer l'écran de veille) ainsi que python et quelques jeux peuvent se lancer, ce qui m'avance pas trop.

Dernière modification par Userdebutant (23-02-2019 12:17:31)

smolski · 23-02-2019 12:16:36

Userdebutant a écrit :

Les programmes ne se lancent plus, pas d'accès au terminal

Essaie la console, depuis la session graphique utiliser la combinaison des 3 touches : Ctrl Alt F3.

Le tuto :
https://debian-facile.org/doc:systeme:console

Force et courage

Debian Alain · 23-02-2019 12:18:04

attends attends attends ....

tu as fait quoi ? en détail et par le menu ....

tu as provoqué quoi ?

tu as obtenu quoi ? en détail et par le menu ...

çà sent la méga boulette , là ...

dès que tu arriveras à avoir un terminal , essaies de taper ceci :

sudo apt install --reinstall gnome 

et redémarre , normalement , tu devrai avoir un bureau gnome tout neuf 

https://wiki.debian.org/fr/DebianGnome

Dernière modification par Debian Alain (23-02-2019 12:26:27)

Userdebutant · 23-02-2019 12:27:44

Merci, mais l'intérêt du terminal me semblait de pouvoir lancer gnome-tweak-tools en graphique et rechanger l'icône; je ne vois pas quoi faire avec un terminal texte.

Dans gnome-tweak-tools, icônes, j'ai sélectionné un pack d'icônes (korla-light) qui devait sûrement ne pas exister, j'avais supprimé des packs quand l'installation ne marchait pas.
Ce qui a supprimé les 3/4 des icônes et fait planter gnome-tweak-tools. Firefox restait ouvert, bien que sans icône.
J'ai redémarré, ça n'a rien changé sauf pour quelques programmes (dont firerox), qui ne s'ouvrent plus.
J'ai pas utilisé de commandes de terminal pour en arriver là, je ne peux pas développer vraiment plus.

Je vais essayer la manip.
En ouvrant le terminal texte (c'est pas apparu la première fois), j'ai :
Login: [3207.575326] nouveau 0000:04:00.0: bus: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
Faut s'en soucier ? Du coup je peux pas me login j'ai l'impression.

Dernière modification par Userdebutant (23-02-2019 12:33:50)

Debian Alain · 23-02-2019 12:31:33

le but d'un terminal texte , c'est , justement , de pouvoir rattraper ses bêtises quand on a gaffé en graphique .

du reste , les commandes texte sont souvent bien plus puissantes et plus précises que les commandes graphiques .

Userdebutant · 23-02-2019 12:35:28

Oui bien sûr, c'est bien pratique là.
Par rapport au login je vois pas trop ce qui est attendu : le nom d'utilisateur ne fonctionne pas, qu'est-ce qu'il faut mettre exactement ?

Dernière modification par Userdebutant (23-02-2019 12:42:52)

Debian Alain · 23-02-2019 12:42:47

si sudo ne fonctionne pas , faut taper

su -

et rentrer le mot de passe administrateur 

puis retaper ma commande sans "sudo"

si sudo a été réglé chez toi , sufit de rentrer le mot de passe utilisateur .

ben , si ma commande ne fonctionne pas , au moins partiellement (ce qui serai étonnant) , faudra demander à plus calé ou peut être aussi réinstaller gnome tweak-tools .

https://doc.ubuntu-fr.org/gnome-tweak-tool

sudo apt install --reinstall gnome-tweak-tool

çà réinstallera peut être tes paquets de thèmes 

Dernière modification par Debian Alain (23-02-2019 12:47:17)

Userdebutant · 23-02-2019 12:44:11

J'ai pas pu l'essayer encore, j'essaie toujours de rentre le nom d'utilisateur mais soit je ne le connais pas, soit le login ne fonctionne pas.

Debian Alain · 23-02-2019 12:50:10

ne confonds pas le user (nom d'utilisateur($)) et le M.D.P. user (mot de passe de l'utilisateur($))

n'oublie pas que , si sudo n'est pas configuré sur ta machine , faut penser au M.D.P. administrateur (ou root (#))

vu ton message en #10 , çà dépasse mes compétences .

apparemment un problème avec le pilote nouveau pour les cartes nvidia .

Dernière modification par Debian Alain (23-02-2019 12:57:45)

Userdebutant · 23-02-2019 13:01:30

C'était simplement un problème lié au pavé numérique pour le mot de passe (je pouvais pas m'en rendre compte, y avait pas d'affichage), le user était bon.
J'ai exécuté les deux commandes et redémarré, ça ne change rien (gnome aurait été réinstallé, j'ai pas vraiment de moyen d'en être sûr mais c'est ce qu'affichait le terminal).
Si c'est juste le pilote nouveau c'est pas un problème, j'ai ça depuis toujours, ça ne dérange pas.

Dernière modification par Userdebutant (23-02-2019 13:02:50)

Debian Alain · 23-02-2019 13:05:36

tu utilises le pilote proprio ou le pilote libre pour ta carte graphique ?

Userdebutant · 23-02-2019 13:08:08

Je ne sais pas trop. Proprio je suppose. Mais ça n'a jamais posé problème, pas sûr que ça aide.

Debian Alain · 23-02-2019 13:12:35

faudrai regarder le Xorg.0.log (/var/log/) mais tu pourra pas l'afficher ici et j'ai pas assez de connaissances pour t'aider ....

Userdebutant · 23-02-2019 13:15:03

Je vois ça dans une heure, merci beaucoup en tout cas.
Après vérification le dossier korla-light semble normal. Je vais vérifier tout ce à quoi j'ai touché hier.

Debian Alain · 23-02-2019 13:21:10

si tu sais faire , remarque , tu peux essayer d'afficher ton Xorg.0.log ici . depuis un écran texte , moi , je sais pas faire .

Userdebutant · 23-02-2019 13:53:25

J'ai deux fichiers, Xorg.0.log et Xorg.0.log.old
Ils sont localisés dans .local/share/xorg, dans le dossier utilisateur (rien dans var/log).
Je peux prendre des photos, mais le fichier est assez long, qu'est-ce qui serait intéressant ?
Autrement si vous savez comment sélectionner et copier du texte dans le terminal texte (ctrl maj a ne fonctionne pas), je peux le poster ici (le presse-papier est commun avec mon téléphone). Xclip ne fonctionne pas, ça doit pouvoir se résoudre mais j'évite d'utiliser le terminal, faudrait que l'historique conserve un maximum de commandes au cas où.

Est-ce que renommer korla-light en korla et inversement (korla en korla-light) aurait un quelconque effet, sachant que korla est un pack d'icônes fonctionnel ?

Dernière modification par Userdebutant (23-02-2019 14:43:12)

Userdebutant · 23-02-2019 15:34:27

Ça remarche, suffisait d'utiliser la commande

gsettings set org.gnome.desktop.interface icon-theme 'MyIconTheme'

Je connaissais pas gsettings, ça fait l'équivalent de gnome-tweak-tool via le terminal.
Par contre si quelqu'un a une idée de l'origine du bug, je suis preneur ; korla-light n'a pas de raison a priori de faire planter gnome comme ça (d'autant plus que j'en suis sorti en passant à korla). Faudrait peut-être supprimer des fichiers, éditer des fichiers pour éviter que ça se reproduise ?
Le lien posté plus haut m'a permis de changer le thème finalement, merci à tous.

Dernière modification par Userdebutant (23-02-2019 16:08:17)

Debian Alain · 23-02-2019 18:21:54

si tu as récupéré ton bureau graphique , c'est bien .

dans ce cas , pour la curiosité , tu peux nous poster ton Xorg.0.log.

c'est celui là qui est intéressant . malheureusement , il est souvent long .

en plus , je ne connais pas les commandes qui permettent d'envoyer sur le forum un fichier affiché en console .

je crois que çà existe mais je ne les connais pas .

faudrai demander . je ne sais pas où chercher ...

sinon , pour faire un paste en ligne de commande , essaies ceci :

ta commande |& curl -sF 'f:1=<-' ix.io

c'est la seule commande que j'ai trouvé , sur l'irc . elle est pas de moi .

Dernière modification par Debian Alain (23-02-2019 19:56:45)

Userdebutant · 23-02-2019 20:02:33

less Xorg.0.log

[ 12948.223] (--) Log file renamed from "/home/antoine/.local/share/xorg/Xorg.pid-10553.log" to "/home/antoine/.local/share/xorg/Xorg.0.log"

[ 12948.223] 

X.Org X Server 1.19.2

Release Date: 2017-03-02

[ 12948.223] X Protocol Version 11, Revision 0

[ 12948.223] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian

[ 12948.223] Current Operating System: Linux pc-83-1 4.9.0-8-amd64 #1 SMP Debian 4.9.144-3 (2019-02-02) x86_64

[ 12948.223] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=93b32f1e-aade-4bfa-b9b2-89db0f9b9bf5 ro quiet acpi_osi=

[ 12948.223] Build Date: 03 November 2018  03:09:11AM

[ 12948.223] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support) 

[ 12948.223] Current version of pixman: 0.34.0

[ 12948.223]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[ 12948.223] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[ 12948.223] (==) Log file: "/home/antoine/.local/share/xorg/Xorg.0.log", Time: Sat Feb 23 17:58:05 2019

[ 12948.223] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[ 12948.224] (==) No Layout section.  Using the first Screen section.

[ 12948.224] (==) No screen section available. Using defaults.

[ 12948.224] (**) |-->Screen "Default Screen Section" (0)

[ 12948.224] (**) |   |-->Monitor "<default monitor>"

[ 12948.224] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[ 12948.224] (==) Automatically adding devices

[ 12948.224] (==) Automatically enabling devices

[ 12948.224] (==) Automatically adding GPU devices

[ 12948.224] (==) Max clients allowed: 256, resource mask: 0x1fffff

[ 12948.224] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[ 12948.224]  Entry deleted from font path.

[ 12948.224] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[ 12948.224] (==) ModulePath set to "/usr/lib/xorg/modules"

[ 12948.224] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[ 12948.224] (II) Loader magic: 0x56119b29ce00

[ 12948.224] (II) Module ABI versions:

[ 12948.224]  X.Org ANSI C Emulation: 0.4

[ 12948.224]  X.Org Video Driver: 23.0

[ 12948.224]  X.Org XInput driver : 24.1

[ 12948.224]  X.Org Server Extension : 10.0

[ 12948.229] (++) using VT number 2

[ 12948.231] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_312

[ 12948.232] (II) xfree86: Adding drm device (/dev/dri/card0)

[ 12948.233] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0

[ 12948.233] (II) xfree86: Adding drm device (/dev/dri/card1)

[ 12948.233] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0

[ 12948.235] (--) PCI:*(0:0:2:0) 8086:0a16:1043:228a rev 11, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072

[ 12948.235] (--) PCI: (0:4:0:0) 10de:1140:1043:228a rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288

[ 12948.235] (II) LoadModule: "glx"

[ 12948.235] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[ 12948.236] (II) Module glx: vendor="X.Org Foundation"

[ 12948.236]  compiled for 1.19.2, module version = 1.0.0

[ 12948.236]  ABI class: X.Org Server Extension, version 10.0

[ 12948.236] (==) Matched nouveau as autoconfigured driver 0

[ 12948.236] (==) Matched nv as autoconfigured driver 1

[ 12948.236] (==) Matched modesetting as autoconfigured driver 2

[ 12948.236] (==) Matched fbdev as autoconfigured driver 3

[ 12948.236] (==) Matched vesa as autoconfigured driver 4

[ 12948.236] (==) Assigned the driver to the xf86ConfigLayout

[ 12948.236] (II) LoadModule: "nouveau"

[ 12948.236] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so

[ 12948.236] (II) Module nouveau: vendor="X.Org Foundation"

[ 12948.236]  compiled for 1.19.3, module version = 1.0.13

[ 12948.236]  Module class: X.Org Video Driver

[ 12948.236]  ABI class: X.Org Video Driver, version 23.0

[ 12948.237] (II) LoadModule: "nv"

[ 12948.237] (WW) Warning, couldn't open module nv

[ 12948.237] (II) UnloadModule: "nv"

[ 12948.237] (II) Unloading nv

[ 12948.237] (EE) Failed to load module "nv" (module does not exist, 0)

[ 12948.237] (II) LoadModule: "modesetting"

[ 12948.237] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[ 12948.237] (II) Module modesetting: vendor="X.Org Foundation"

[ 12948.237]  compiled for 1.19.2, module version = 1.19.2

[ 12948.237]  Module class: X.Org Video Driver

[ 12948.237]  ABI class: X.Org Video Driver, version 23.0

[ 12948.237] (II) LoadModule: "fbdev"

[ 12948.237] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[ 12948.237] (II) Module fbdev: vendor="X.Org Foundation"

[ 12948.237]  compiled for 1.19.0, module version = 0.4.4

[ 12948.237]  Module class: X.Org Video Driver

[ 12948.237]  ABI class: X.Org Video Driver, version 23.0

[ 12948.237] (II) LoadModule: "vesa"

[ 12948.237] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[ 12948.237] (II) Module vesa: vendor="X.Org Foundation"

[ 12948.237]  compiled for 1.19.0, module version = 2.3.4

[ 12948.237]  Module class: X.Org Video Driver

[ 12948.237]  ABI class: X.Org Video Driver, version 23.0

[ 12948.237] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400

[ 12948.237] (II) NOUVEAU driver for NVIDIA chipset families :

[ 12948.237]  RIVA TNT        (NV04)

[ 12948.237]  RIVA TNT2       (NV05)

[ 12948.237]  GeForce 256     (NV10)

[ 12948.237]  GeForce 2       (NV11, NV15)

[ 12948.237]  GeForce 4MX     (NV17, NV18)

[ 12948.237]  GeForce 3       (NV20)

[ 12948.237]  GeForce 4Ti     (NV25, NV28)

[ 12948.237]  GeForce FX      (NV3x)

[ 12948.237]  GeForce 6       (NV4x)

[ 12948.238]  GeForce 7       (G7x)

[ 12948.238]  GeForce 8       (G8x)

[ 12948.238]  GeForce GTX 200 (NVA0)

[ 12948.238]  GeForce GTX 400 (NVC0)

[ 12948.238] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[ 12948.238] (II) FBDEV: driver for framebuffer: fbdev

[ 12948.238] (II) VESA: driver for VESA chipsets: vesa

[ 12948.238] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)

[ 12948.238] (II) [drm] nouveau interface version: 1.3.1

[ 12948.238] (II) modeset(0): using drv /dev/dri/card0

[ 12948.238] (WW) Falling back to old probe method for fbdev

[ 12948.238] (II) Loading sub module "fbdevhw"

[ 12948.238] (II) LoadModule: "fbdevhw"

[ 12948.238] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[ 12948.238] (II) Module fbdevhw: vendor="X.Org Foundation"

[ 12948.238]  compiled for 1.19.2, module version = 0.0.2

[ 12948.238]  ABI class: X.Org Video Driver, version 23.0

[ 12948.238] (WW) Falling back to old probe method for vesa

[ 12948.238] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support

[ 12948.238] (II) modeset(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[ 12948.238] (==) modeset(0): Depth 24, (==) framebuffer bpp 32

[ 12948.238] (==) modeset(0): RGB weight 888

[ 12948.238] (==) modeset(0): Default visual is TrueColor

[ 12948.238] (II) Loading sub module "glamoregl"

[ 12948.238] (II) LoadModule: "glamoregl"

[ 12948.238] (II) Loading /usr/lib/xorg/modules/libglamoregl.so

[ 12948.242] (II) Module glamoregl: vendor="X.Org Foundation"

[ 12948.242]  compiled for 1.19.2, module version = 1.0.0

[ 12948.242]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12948.242] (II) glamor: OpenGL accelerated X.org driver based.

[ 12948.254] (II) glamor: EGL version 1.4 (DRI2):

[ 12948.256] (II) modeset(0): glamor initialized

[ 12948.257] (II) modeset(0): Output eDP-1 has no monitor section

[ 12948.257] (II) modeset(0): Output DP-1 has no monitor section

[ 12948.259] (II) modeset(0): Output HDMI-1 has no monitor section

[ 12948.260] (II) modeset(0): EDID for output eDP-1

[ 12948.260] (II) modeset(0): Manufacturer: AUO  Model: 48ec  Serial#: 0

[ 12948.260] (II) modeset(0): Year: 2013  Week: 0

[ 12948.260] (II) modeset(0): EDID Version: 1.4

[ 12948.260] (II) modeset(0): Digital Display Input

[ 12948.260] (II) modeset(0): 6 bits per channel

[ 12948.260] (II) modeset(0): Digital interface is DisplayPort

[ 12948.260] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19

[ 12948.260] (II) modeset(0): Gamma: 2.20

[ 12948.260] (II) modeset(0): No DPMS capabilities specified

[ 12948.260] (II) modeset(0): Supported color encodings: RGB 4:4:4 

[ 12948.260] (II) modeset(0): First detailed timing is preferred mode

[ 12948.260] (II) modeset(0): Preferred mode is native pixel format and refresh rate

[ 12948.260] (II) modeset(0): redX: 0.590 redY: 0.340   greenX: 0.330 greenY: 0.550

[ 12948.260] (II) modeset(0): blueX: 0.150 blueY: 0.140   whiteX: 0.313 whiteY: 0.329

[ 12948.260] (II) modeset(0): Manufacturer's mask: 0

[ 12948.260] (II) modeset(0): Supported detailed timing:

[ 12948.260] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 193 mm

[ 12948.260] (II) modeset(0): h_active: 1366  h_sync: 1404  h_sync_end 1426 h_blank_end 1592 h_border: 0

[ 12948.260] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 798 v_border: 0

[ 12948.260] (II) modeset(0): Unknown vendor-specific block f

[ 12948.260] (II) modeset(0):  AUO

[ 12948.260] (II) modeset(0):  B156XW004.8

[ 12948.260] (II) modeset(0): EDID (in hex):

[ 12948.260] (II) modeset(0):   00ffffffffffff0006afec4800000000

[ 12948.260] (II) modeset(0):   0017010495221378020bb59757548c26

[ 12948.260] (II) modeset(0):   23505400000001010101010101010101

[ 12948.260] (II) modeset(0):   010101010101ce1d56e250001e302616

[ 12948.260] (II) modeset(0):   360058c1100000180000000f00000000

[ 12948.260] (II) modeset(0):   00000000000000000020000000fe0041

[ 12948.260] (II) modeset(0):   554f0a202020202020202020000000fe

[ 12948.260] (II) modeset(0):   004231353658573030342e38200a00d3

[ 12948.260] (II) modeset(0): Printing probed modes for output eDP-1

[ 12948.260] (II) modeset(0): Modeline "1366x768"x60.1   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 12948.260] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)

[ 12948.260] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)

[ 12948.260] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)

[ 12948.260] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)

[ 12948.260] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)

[ 12948.260] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)

[ 12948.260] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)

[ 12948.260] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)

[ 12948.260] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)

[ 12948.261] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)

[ 12948.261] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)

[ 12948.261] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)

[ 12948.261] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)

[ 12948.261] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)

[ 12948.261] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)

[ 12948.261] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)

[ 12948.261] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)

[ 12948.261] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)

[ 12948.261] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)

[ 12948.261] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)

[ 12948.261] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)

[ 12948.261] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)

[ 12948.261] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)

[ 12948.261] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)

[ 12948.261] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)

[ 12948.261] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)

[ 12948.261] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)

[ 12948.261] (II) modeset(0): EDID for output DP-1

[ 12948.262] (II) modeset(0): EDID for output HDMI-1

[ 12948.262] (II) modeset(0): Output eDP-1 connected

[ 12948.262] (II) modeset(0): Output DP-1 disconnected

[ 12948.262] (II) modeset(0): Output HDMI-1 disconnected

[ 12948.262] (II) modeset(0): Using exact sizes for initial modes

[ 12948.262] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0

[ 12948.262] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)

[ 12948.262] (==) modeset(0): DPI set to (96, 96)

[ 12948.262] (II) Loading sub module "fb"

[ 12948.262] (II) LoadModule: "fb"

[ 12948.262] (II) Loading /usr/lib/xorg/modules/libfb.so

[ 12948.263] (II) Module fb: vendor="X.Org Foundation"

[ 12948.263]  compiled for 1.19.2, module version = 1.0.0

[ 12948.263]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12948.263] (II) Loading sub module "dri2"

[ 12948.263] (II) LoadModule: "dri2"

[ 12948.263] (II) Module "dri2" already built-in

[ 12948.263] (--) NOUVEAU(G0): Chipset: "NVIDIA NVD7"

[ 12948.263] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32

[ 12948.263] (==) NOUVEAU(G0): RGB weight 888

[ 12948.263] (==) NOUVEAU(G0): Default visual is TrueColor

[ 12948.263] (==) NOUVEAU(G0): Using HW cursor

[ 12948.263] (==) NOUVEAU(G0): Allowed maximum DRI level 2.

[ 12948.263] (==) NOUVEAU(G0): GLX sync to VBlank enabled.

[ 12948.263] (==) NOUVEAU(G0): Page flipping enabled

[ 12948.263] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2]

[ 12948.263] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel.

[ 12948.263] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0)

[ 12948.263] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)

[ 12948.263] (**) NOUVEAU(G0):  Mode "1366x768": 84.8 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz

[ 12948.263] (II) NOUVEAU(G0): Modeline "1366x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)

[ 12948.263] (==) NOUVEAU(G0): DPI set to (96, 96)

[ 12948.263] (II) Loading sub module "fb"

[ 12948.263] (II) LoadModule: "fb"

[ 12948.263] (II) Loading /usr/lib/xorg/modules/libfb.so

[ 12948.263] (II) Module fb: vendor="X.Org Foundation"

[ 12948.263]  compiled for 1.19.2, module version = 1.0.0

[ 12948.263]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12948.263] (II) Loading sub module "shadowfb"

[ 12948.263] (II) LoadModule: "shadowfb"

[ 12948.263] (II) Loading /usr/lib/xorg/modules/libshadowfb.so

[ 12948.263] (II) Module shadowfb: vendor="X.Org Foundation"

[ 12948.263]  compiled for 1.19.2, module version = 1.0.0

[ 12948.263]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 12948.263] (II) UnloadModule: "fbdev"

[ 12948.263] (II) Unloading fbdev

[ 12948.263] (II) UnloadSubModule: "fbdevhw"

[ 12948.263] (II) Unloading fbdevhw

[ 12948.263] (II) UnloadModule: "vesa"

[ 12948.263] (II) Unloading vesa

[ 12948.263] (==) Depth 24 pixmap format is 32 bpp

[ 12948.323] (II) NOUVEAU(G0): Channel setup complete.

[ 12948.363] (II) NOUVEAU(G0): [COPY] async initialised.

[ 12948.363] (II) NOUVEAU(G0): Hardware support for Present enabled

[ 12948.363] (II) NOUVEAU(G0): [DRI2] Setup complete

[ 12948.363] (II) NOUVEAU(G0): [DRI2]   DRI driver: nouveau

[ 12948.363] (II) NOUVEAU(G0): [DRI2]   VDPAU driver: nouveau

[ 12948.363] (II) Loading sub module "exa"

[ 12948.363] (II) LoadModule: "exa"

[ 12948.364] (II) Loading /usr/lib/xorg/modules/libexa.so

[ 12948.364] (II) Module exa: vendor="X.Org Foundation"

[ 12948.364]  compiled for 1.19.2, module version = 2.6.0

[ 12948.364]  ABI class: X.Org Video Driver, version 23.0

[ 12948.364] (II) EXA(256): Driver allocated offscreen pixmaps

[ 12948.364] (II) EXA(256): Driver registered support for the following operations:

[ 12948.364] (II)         Solid

[ 12948.364] (II)         Copy

[ 12948.364] (II)         Composite (RENDER acceleration)

[ 12948.364] (II)         UploadToScreen

[ 12948.364] (II)         DownloadFromScreen

[ 12948.364] (==) NOUVEAU(G0): Backing store enabled

[ 12948.364] (==) NOUVEAU(G0): Silken mouse enabled

[ 12948.364] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.

[ 12948.364] (II) NOUVEAU(G0): [XvMC] Extension initialized.

[ 12948.364] (==) NOUVEAU(G0): DPMS enabled

[ 12948.364] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.

[ 12948.438] (==) modeset(0): Backing store enabled

[ 12948.438] (==) modeset(0): Silken mouse enabled

[ 12948.438] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[ 12948.438] (==) modeset(0): DPMS enabled

[ 12948.438] (II) modeset(0): [DRI2] Setup complete

[ 12948.438] (II) modeset(0): [DRI2]   DRI driver: i965

[ 12948.438] (II) modeset(0): [DRI2]   VDPAU driver: i965

[ 12948.438] (--) RandR disabled

[ 12948.441] (II) SELinux: Disabled on system

[ 12948.445] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[ 12948.445] (II) AIGLX: enabled GLX_ARB_create_context

[ 12948.445] (II) AIGLX: enabled GLX_ARB_create_context_profile

[ 12948.445] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[ 12948.445] (II) AIGLX: enabled GLX_INTEL_swap_event

[ 12948.445] (II) AIGLX: enabled GLX_SGI_swap_control

[ 12948.445] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[ 12948.445] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[ 12948.445] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[ 12948.445] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[ 12948.445] (II) AIGLX: enabled GLX_ARB_create_context_robustness

[ 12948.445] (II) AIGLX: Loaded and initialized i965

[ 12948.445] (II) GLX: Initialized DRI2 GL provider for screen 0

[ 12948.446] (II) NOUVEAU(G0): NVEnterVT is called.

[ 12948.449] (II) modeset(0): Damage tracking initialized

[ 12948.449] (II) modeset(0): Setting screen physical size to 361 x 203

[ 12948.482] (II) config/udev: Adding input device Power Button (/dev/input/event6)

[ 12948.482] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[ 12948.482] (II) LoadModule: "libinput"

[ 12948.482] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[ 12948.484] (II) Module libinput: vendor="X.Org Foundation"

[ 12948.484]  compiled for 1.19.0, module version = 0.23.0

[ 12948.484]  Module class: X.Org XInput Driver

[ 12948.484]  ABI class: X.Org XInput driver, version 24.1

[ 12948.484] (II) Using input driver 'libinput' for 'Power Button'

[ 12948.485] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 22 paused 0

[ 12948.485] (**) Power Button: always reports core events

[ 12948.485] (**) Option "Device" "/dev/input/event6"

[ 12948.485] (**) Option "_source" "server/udev"

[ 12948.485] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard

[ 12948.485] (II) input device 'Power Button', /dev/input/event6 is a keyboard

[ 12948.486] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event6"

[ 12948.486] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[ 12948.486] (**) Option "xkb_model" "pc105"

[ 12948.486] (**) Option "xkb_layout" "fr"

[ 12948.486] (**) Option "xkb_variant" "latin9"

[ 12948.501] (II) input device 'Power Button', /dev/input/event6 is tagged by udev as: Keyboard

[ 12948.501] (II) input device 'Power Button', /dev/input/event6 is a keyboard

[ 12948.502] (II) config/udev: Adding input device Video Bus (/dev/input/event8)

[ 12948.502] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[ 12948.502] (II) Using input driver 'libinput' for 'Video Bus'

[ 12948.503] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 25 paused 0

[ 12948.503] (**) Video Bus: always reports core events

[ 12948.503] (**) Option "Device" "/dev/input/event8"

[ 12948.503] (**) Option "_source" "server/udev"

[ 12948.503] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard

[ 12948.503] (II) input device 'Video Bus', /dev/input/event8 is a keyboard

[ 12948.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event8"

[ 12948.503] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)

[ 12948.503] (**) Option "xkb_model" "pc105"

[ 12948.503] (**) Option "xkb_layout" "fr"

[ 12948.503] (**) Option "xkb_variant" "latin9"

[ 12948.504] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard

[ 12948.504] (II) input device 'Video Bus', /dev/input/event8 is a keyboard

[ 12948.504] (II) config/udev: Adding input device Video Bus (/dev/input/event7)

[ 12948.504] (**) Video Bus: Applying InputClass "libinput keyboard catchall"

[ 12948.504] (II) Using input driver 'libinput' for 'Video Bus'

[ 12948.505] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 26 paused 0

[ 12948.505] (**) Video Bus: always reports core events

[ 12948.505] (**) Option "Device" "/dev/input/event7"

[ 12948.505] (**) Option "_source" "server/udev"

[ 12948.505] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard

[ 12948.505] (II) input device 'Video Bus', /dev/input/event7 is a keyboard

[ 12948.505] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:00/input/input14/event7"

[ 12948.505] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)

[ 12948.505] (**) Option "xkb_model" "pc105"

[ 12948.505] (**) Option "xkb_layout" "fr"

[ 12948.505] (**) Option "xkb_variant" "latin9"

[ 12948.506] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard

[ 12948.506] (II) input device 'Video Bus', /dev/input/event7 is a keyboard

[ 12948.506] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)

[ 12948.507] (II) No input driver specified, ignoring this device.

[ 12948.507] (II) This device may have been added with another device file.

[ 12948.507] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)

[ 12948.507] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"

[ 12948.507] (II) Using input driver 'libinput' for 'Sleep Button'

[ 12948.507] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0

[ 12948.507] (**) Sleep Button: always reports core events

[ 12948.507] (**) Option "Device" "/dev/input/event5"

[ 12948.508] (**) Option "_source" "server/udev"

[ 12948.508] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard

[ 12948.508] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard

[ 12948.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12/event5"

[ 12948.508] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)

[ 12948.508] (**) Option "xkb_model" "pc105"

[ 12948.508] (**) Option "xkb_layout" "fr"

[ 12948.508] (**) Option "xkb_variant" "latin9"

[ 12948.509] (II) input device 'Sleep Button', /dev/input/event5 is tagged by udev as: Keyboard

[ 12948.509] (II) input device 'Sleep Button', /dev/input/event5 is a keyboard

[ 12948.509] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)

[ 12948.509] (II) No input driver specified, ignoring this device.

[ 12948.509] (II) This device may have been added with another device file.

[ 12948.510] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)

[ 12948.510] (II) No input driver specified, ignoring this device.

[ 12948.510] (II) This device may have been added with another device file.

[ 12948.510] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)

[ 12948.510] (II) No input driver specified, ignoring this device.

[ 12948.510] (II) This device may have been added with another device file.

[ 12948.511] (II) config/udev: Adding input device SONiX USB Device (/dev/input/event2)

[ 12948.511] (**) SONiX USB Device: Applying InputClass "libinput keyboard catchall"

[ 12948.511] (II) Using input driver 'libinput' for 'SONiX USB Device'

[ 12948.511] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 28 paused 0

[ 12948.511] (**) SONiX USB Device: always reports core events

[ 12948.511] (**) Option "Device" "/dev/input/event2"

[ 12948.511] (**) Option "_source" "server/udev"

[ 12948.512] (II) input device 'SONiX USB Device', /dev/input/event2 is tagged by udev as: Keyboard

[ 12948.512] (II) input device 'SONiX USB Device', /dev/input/event2 is a keyboard

[ 12948.512] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:0C45:7406.0001/input/input9/event2"

[ 12948.512] (II) XINPUT: Adding extended input device "SONiX USB Device" (type: KEYBOARD, id 10)

[ 12948.512] (**) Option "xkb_model" "pc105"

[ 12948.512] (**) Option "xkb_layout" "fr"

[ 12948.512] (**) Option "xkb_variant" "latin9"

[ 12948.512] (II) input device 'SONiX USB Device', /dev/input/event2 is tagged by udev as: Keyboard

[ 12948.512] (II) input device 'SONiX USB Device', /dev/input/event2 is a keyboard

[ 12948.513] (II) config/udev: Adding input device SONiX USB Device (/dev/input/event3)

[ 12948.513] (**) SONiX USB Device: Applying InputClass "libinput pointer catchall"

[ 12948.513] (**) SONiX USB Device: Applying InputClass "libinput keyboard catchall"

[ 12948.513] (II) Using input driver 'libinput' for 'SONiX USB Device'

[ 12948.513] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0

[ 12948.514] (**) SONiX USB Device: always reports core events

[ 12948.514] (**) Option "Device" "/dev/input/event3"

[ 12948.514] (**) Option "_source" "server/udev"

[ 12948.514] (II) input device 'SONiX USB Device', /dev/input/event3 is tagged by udev as: Keyboard Mouse

[ 12948.514] (II) input device 'SONiX USB Device', /dev/input/event3 is a pointer caps

[ 12948.514] (II) input device 'SONiX USB Device', /dev/input/event3 is a keyboard

[ 12948.514] (II) libinput: SONiX USB Device: needs a virtual subdevice

[ 12948.514] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:0C45:7406.0002/input/input10/event3"

[ 12948.514] (II) XINPUT: Adding extended input device "SONiX USB Device" (type: MOUSE, id 11)

[ 12948.514] (**) Option "AccelerationScheme" "none"

[ 12948.514] (**) SONiX USB Device: (accel) selected scheme none/0

[ 12948.514] (**) SONiX USB Device: (accel) acceleration factor: 2.000

[ 12948.514] (**) SONiX USB Device: (accel) acceleration threshold: 4

[ 12948.515] (II) input device 'SONiX USB Device', /dev/input/event3 is tagged by udev as: Keyboard Mouse

[ 12948.515] (II) input device 'SONiX USB Device', /dev/input/event3 is a pointer caps

[ 12948.515] (II) input device 'SONiX USB Device', /dev/input/event3 is a keyboard

[ 12948.515] (II) config/udev: Adding input device SONiX USB Device (/dev/input/mouse1)

[ 12948.515] (II) No input driver specified, ignoring this device.

[ 12948.515] (II) This device may have been added with another device file.

[ 12948.516] (II) config/udev: Adding input device USB Camera (/dev/input/event17)

[ 12948.516] (**) USB Camera: Applying InputClass "libinput keyboard catchall"

[ 12948.516] (II) Using input driver 'libinput' for 'USB Camera'

[ 12948.516] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 30 paused 0

[ 12948.516] (**) USB Camera: always reports core events

[ 12948.516] (**) Option "Device" "/dev/input/event17"

[ 12948.516] (**) Option "_source" "server/udev"

[ 12948.516] (II) input device 'USB Camera', /dev/input/event17 is tagged by udev as: Keyboard

[ 12948.516] (II) input device 'USB Camera', /dev/input/event17 is a keyboard

[ 12948.516] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input24/event17"

[ 12948.517] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 12)

[ 12948.517] (**) Option "xkb_model" "pc105"

[ 12948.517] (**) Option "xkb_layout" "fr"

[ 12948.517] (**) Option "xkb_variant" "latin9"

[ 12948.517] (II) input device 'USB Camera', /dev/input/event17 is tagged by udev as: Keyboard

[ 12948.517] (II) input device 'USB Camera', /dev/input/event17 is a keyboard

[ 12948.517] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event10)

[ 12948.517] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "libinput touchscreen catchall"

[ 12948.517] (II) Using input driver 'libinput' for 'Atmel Atmel maXTouch Digitizer'

[ 12948.596] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 31 paused 0

[ 12948.596] (**) Atmel Atmel maXTouch Digitizer: always reports core events

[ 12948.596] (**) Option "Device" "/dev/input/event10"

[ 12948.596] (**) Option "_source" "server/udev"

[ 12948.598] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event10 is tagged by udev as: Touchscreen

[ 12948.598] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event10 is a touch device

[ 12948.598] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/0003:03EB:8A0B.0003/input/input17/event10"

[ 12948.598] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 13)

[ 12948.598] (**) Option "AccelerationScheme" "none"

[ 12948.598] (**) Atmel Atmel maXTouch Digitizer: (accel) selected scheme none/0

[ 12948.598] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000

[ 12948.598] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4

[ 12948.599] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event10 is tagged by udev as: Touchscreen

[ 12948.599] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event10 is a touch device

[ 12948.600] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse2)

[ 12948.600] (II) No input driver specified, ignoring this device.

[ 12948.601] (II) This device may have been added with another device file.

[ 12948.601] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)

[ 12948.601] (II) No input driver specified, ignoring this device.

[ 12948.601] (II) This device may have been added with another device file.

[ 12948.602] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)

[ 12948.602] (II) No input driver specified, ignoring this device.

[ 12948.602] (II) This device may have been added with another device file.

[ 12948.603] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event11)

[ 12948.603] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"

[ 12948.603] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'

[ 12948.604] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 32 paused 0

[ 12948.605] (**) Asus WMI hotkeys: always reports core events

[ 12948.605] (**) Option "Device" "/dev/input/event11"

[ 12948.605] (**) Option "_source" "server/udev"

[ 12948.605] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard

[ 12948.605] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is a keyboard

[ 12948.605] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input18/event11"

[ 12948.605] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 14)

[ 12948.605] (**) Option "xkb_model" "pc105"

[ 12948.605] (**) Option "xkb_layout" "fr"

[ 12948.605] (**) Option "xkb_variant" "latin9"

[ 12948.607] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is tagged by udev as: Keyboard

[ 12948.607] (II) input device 'Asus WMI hotkeys', /dev/input/event11 is a keyboard

[ 12948.607] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[ 12948.607] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[ 12948.607] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[ 12948.609] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0

[ 12948.609] (**) AT Translated Set 2 keyboard: always reports core events

[ 12948.609] (**) Option "Device" "/dev/input/event0"

[ 12948.609] (**) Option "_source" "server/udev"

[ 12948.609] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[ 12948.609] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[ 12948.610] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[ 12948.610] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)

[ 12948.610] (**) Option "xkb_model" "pc105"

[ 12948.610] (**) Option "xkb_layout" "fr"

[ 12948.610] (**) Option "xkb_variant" "latin9"

[ 12948.611] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[ 12948.611] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[ 12948.611] (II) config/udev: Adding input device FocalTechPS/2 FocalTech Touchpad (/dev/input/event1)

[ 12948.611] (**) FocalTechPS/2 FocalTech Touchpad: Applying InputClass "libinput touchpad catchall"

[ 12948.611] (II) Using input driver 'libinput' for 'FocalTechPS/2 FocalTech Touchpad'

[ 12948.612] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 34 paused 0

[ 12948.612] (**) FocalTechPS/2 FocalTech Touchpad: always reports core events

[ 12948.612] (**) Option "Device" "/dev/input/event1"

[ 12948.613] (**) Option "_source" "server/udev"

[ 12948.613] (II) input device 'FocalTechPS/2 FocalTech Touchpad', /dev/input/event1 is tagged by udev as: Touchpad

[ 12948.613] (II) FocalTechPS/2 FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm

[ 12948.613] (II) input device 'FocalTechPS/2 FocalTech Touchpad', /dev/input/event1 is a touchpad

[ 12948.613] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event1"

[ 12948.613] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech Touchpad" (type: TOUCHPAD, id 16)

[ 12948.614] (**) Option "AccelerationScheme" "none"

[ 12948.614] (**) FocalTechPS/2 FocalTech Touchpad: (accel) selected scheme none/0

[ 12948.614] (**) FocalTechPS/2 FocalTech Touchpad: (accel) acceleration factor: 2.000

[ 12948.614] (**) FocalTechPS/2 FocalTech Touchpad: (accel) acceleration threshold: 4

[ 12948.614] (II) input device 'FocalTechPS/2 FocalTech Touchpad', /dev/input/event1 is tagged by udev as: Touchpad

[ 12948.615] (II) FocalTechPS/2 FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm

[ 12948.615] (II) input device 'FocalTechPS/2 FocalTech Touchpad', /dev/input/event1 is a touchpad

[ 12948.615] (II) config/udev: Adding input device FocalTechPS/2 FocalTech Touchpad (/dev/input/mouse0)

[ 12948.615] (II) No input driver specified, ignoring this device.

[ 12948.615] (II) This device may have been added with another device file.

[ 12948.616] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)

[ 12948.616] (II) No input driver specified, ignoring this device.

[ 12948.616] (II) This device may have been added with another device file.

[ 12948.637] (**) SONiX USB Device: Applying InputClass "libinput pointer catchall"

[ 12948.637] (**) SONiX USB Device: Applying InputClass "libinput keyboard catchall"

[ 12948.637] (II) Using input driver 'libinput' for 'SONiX USB Device'

[ 12948.637] (II) systemd-logind: returning pre-existing fd for /dev/input/event3 13:67

[ 12948.637] (**) SONiX USB Device: always reports core events

[ 12948.637] (**) Option "Device" "/dev/input/event3"

[ 12948.637] (**) Option "_source" "_driver/libinput"

[ 12948.637] (II) libinput: SONiX USB Device: is a virtual subdevice

[ 12948.637] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:0C45:7406.0002/input/input10/event3"

[ 12948.637] (II) XINPUT: Adding extended input device "SONiX USB Device" (type: KEYBOARD, id 17)

[ 12948.637] (**) Option "xkb_model" "pc105"

[ 12948.637] (**) Option "xkb_layout" "fr"

[ 12948.637] (**) Option "xkb_variant" "latin9"

[ 12948.873] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 12948.873] (II) modeset(0): Printing DDC gathered Modelines:

[ 12948.873] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 12950.117] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 12950.117] (II) modeset(0): Printing DDC gathered Modelines:

[ 12950.117] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 12950.128] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 12950.129] (II) modeset(0): Printing DDC gathered Modelines:

[ 12950.129] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 12950.996] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 12950.996] (II) modeset(0): Printing DDC gathered Modelines:

[ 12950.996] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 12975.903] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 12975.903] (II) modeset(0): Printing DDC gathered Modelines:

[ 12975.903] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 12977.620] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 12977.620] (II) modeset(0): Printing DDC gathered Modelines:

[ 12977.620] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 14078.278] (**) Option "fd" "31"

[ 14082.700] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event10 is tagged by udev as: Touchscreen

[ 14082.700] (II) input device 'Atmel Atmel maXTouch Digitizer', /dev/input/event10 is a touch device

[ 14106.362] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 14106.362] (II) modeset(0): Printing DDC gathered Modelines:

[ 14106.362] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

[ 14109.541] (II) modeset(0): EDID vendor "AUO", prod id 18668

[ 14109.541] (II) modeset(0): Printing DDC gathered Modelines:

[ 14109.541] (II) modeset(0): Modeline "1366x768"x0.0   76.30  1366 1404 1426 1592  768 771 777 798 -hsync -vsync (47.9 kHz eP)

Qu'est-ce que ça pourrait apporter de corriger le bug de la carte graphique ? Je préfère pas y toucher si c'est pas essentiel, j'ai peur de faire plus de bazar qu'il n'y en a déjà. Y a pas de problème avec il me semble, tout fonctionne (sauf le bluetooth mais c'est autre chose, et pas important).

Debian-facile

#1 21-02-2019 18:01:57

Installation de thème [Résolu]

#2 22-02-2019 10:30:08

Re : Installation de thème [Résolu]

#3 22-02-2019 21:30:57

Re : Installation de thème [Résolu]

#4 22-02-2019 22:12:07

Re : Installation de thème [Résolu]

#5 22-02-2019 22:17:01

Re : Installation de thème [Résolu]

#6 22-02-2019 23:14:06

Re : Installation de thème [Résolu]

#7 23-02-2019 12:04:45

Re : Installation de thème [Résolu]

#8 23-02-2019 12:16:36

Re : Installation de thème [Résolu]

#9 23-02-2019 12:18:04

Re : Installation de thème [Résolu]

#10 23-02-2019 12:27:44

Re : Installation de thème [Résolu]

#11 23-02-2019 12:31:33

Re : Installation de thème [Résolu]

#12 23-02-2019 12:35:28

Re : Installation de thème [Résolu]

#13 23-02-2019 12:42:47

Re : Installation de thème [Résolu]

#14 23-02-2019 12:44:11

Re : Installation de thème [Résolu]

#15 23-02-2019 12:50:10

Re : Installation de thème [Résolu]

#16 23-02-2019 13:01:30

Re : Installation de thème [Résolu]

#17 23-02-2019 13:05:36

Re : Installation de thème [Résolu]

#18 23-02-2019 13:08:08

Re : Installation de thème [Résolu]

#19 23-02-2019 13:12:35

Re : Installation de thème [Résolu]

#20 23-02-2019 13:15:03

Re : Installation de thème [Résolu]

#21 23-02-2019 13:21:10

Re : Installation de thème [Résolu]

#22 23-02-2019 13:53:25

Re : Installation de thème [Résolu]

#23 23-02-2019 15:34:27

Re : Installation de thème [Résolu]

#24 23-02-2019 18:21:54

Re : Installation de thème [Résolu]

#25 23-02-2019 20:02:33

Re : Installation de thème [Résolu]

Pied de page des forums