logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 06-08-2019 08:27:36

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Partage Samba

Bonjour à tous smile

J'ai monté un partage Samba en me posant pas mal de questions.

J'ai tenté de suivre ce tuto : http://debian-facile.org/atelier:chanti … age-reseau
Ca n'a pas marché.
1- A un moment, une syntaxe chmod ressemble de très près à une syntaxe ACL, mais, chez moi, ça ne passe pas.
2- Un user système ? Je ne comprends pas pourquoi.

Celui-ci aussi m'a bien aidé : http://www.linux-france.org/prj/edu/arc … /ch25.html

J'ai fini par dénicher celui-ci : http://stephane.boireau.free.fr/informa … _share.htm
Deux parties. Là, c'est la première, je crois.
Cette fois, ça a marché.
C'est très étonnant qu'il faille remonter à un tuto datant d'XP...

J'ai ouvert les ports de Samba.
Le tuto de Boireau prescrit de désactiver le pare-feu. Ben, non... Si j'en ai installé un, pourquoi le désactiver ?
Nulle part ailleurs (cahiers de l'administrateur Debian, etc) il n'est conseillé de faire ça pour que fonctionne un partage Samba.
La preuve : en ouvrant les ports de Samba, en entrée et sortie, ça fonctionne.


ufw allow in 137/udp
ufw allow in 138/udp

ufw allow out 137/tcp
ufw allow out 138/tcp

ufw allow in 139/tcp
ufw allow out 139/tcp

ufw allow in 445/udp
ufw allow out 445/tcp
 



Puis créé un user pour ce partage, avec adduser. Je dis bien la commande classique, en root : adduser. Pas adduser --system.
Pour le mot de passe :


smbpasswd -a partage [Mot_de_passe]
 



Voici le smb.conf : (désolé, mais j'ai dû traduire pas mal de passages)



#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
netbios name = Deb-1155  # C'est le hostname du poste du serveur Samba
hosts allow = 192.168.0.37 192.168.0.27  # Les IP des bécanes autorisées à accéder au partage
# .37 : Windows .27 : le 1150 sous Linux
security = user


# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no  

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# TRADUCTION
# Section de prise en charge du nom de serveur Internet Windows:
# Prise en charge de WINS - Indique au composant NMBD de Samba d'activer son serveur WINS
#   wins support = no  

# Serveur WINS - Indique que les composants NMBD de Samba doivent être un client WINS
# Remarque: Samba peut être un serveur WINS ou un client WINS, mais PAS les deux.
;   wins server = w.x.y.z


# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
# TRADUCTION
# Autoriser les utilisateurs ayant reçu des privilèges d’utilisateurs à créer des
# partages publics, pas seulement authentifiés
   usershare allow guests = yes

#======================= Share Definitions =======================

[Partage-sur-1155] # Ce qui apparaîtra sur le réseau. Le poste est en socket 1155, d'où son nom.
comment = Dossier public
path = /home/partage/Public
browseable = yes
public = yes
writable = yes
read only = no
# valid users =  A voir ! Page 2 du fichier "Etapes-tuto-boireau.odt"


[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes

# TRADUTION
# Par défaut, les partages \\ serveur \ nom d'utilisateur peuvent être connectés par n'importe qui
# avec accès au serveur samba.
# Le paramètre suivant permet de s'assurer que seul "nom d'utilisateur" peut se connecter à \\ server \ username
# Cela peut nécessiter des ajustements lors de l'utilisation de schémas d'authentification externes

   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
# TRADUCTION
# Supprimer les commentaires suivants et créer le répertoire netlogon pour les ouvertures de session dans le domaine
# (vous devez également configurer Samba pour qu’il agisse également comme contrôleur de domaine.)

;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on

# TRADUCTION
# Supprimer les commentaires suivants et créer le répertoire de profils à stocker
# profils d'utilisateurs (voir l'option "chemin d'accès" ci-dessus)
# (vous devez également configurer Samba pour qu’il agisse également comme contrôleur de domaine.)
# Le chemin ci-dessous doit être accessible en écriture pour tous les utilisateurs afin que leur
# le répertoire du profil peut être créé lors de la première connexion

;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
# TRADUCTION
# Les clients Windows recherchent ce nom de partage comme source de fichiers téléchargeables.
# pilotes d'imprimante
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
# TRADUCTION
# Décommenter pour permettre l'administration à distance des pilotes d'impression Windows.
# Vous devrez peut-être remplacer "lpadmin" par le nom du groupe que vous avez choisi.
# utilisateurs admin sont membres de.
# Veuillez noter que vous devez également définir les autorisations Unix appropriées.
# au répertoire des pilotes pour que ces utilisateurs puissent y avoir des droits en écriture

;   write list = root, @lpadmin

 



Et, pour finir, j'ai saisi cette commande :


chmod o=+r+w+X /home/partage/Public/
 



Sans cette commande, aucun accès en écriture, mais seulement en lecture. Après la commande, même un fichier dans le dossier partagé déposé par root est accessible en lecture/écriture.
Question : pourquoi ? En principe, c'est au smb.conf de définir les droits, non ?

#   wins support = no  : pourquoi ? Le .0.37 est bien le poste sous Windows 8, et il a accès au partage. Que signifie exactement wins support = no ? La traduction Google n'est pas claire du tout.

Résumé : ça fait un peu bidouille, tout ça hmm

Qu'en pensez-vous ?

Merci smile

Hors ligne

#2 06-08-2019 14:59:16

nifseg
Adhérent(e)
Lieu : Dans une forêt
Distrib. : Debian Bullseye + Bookworm + Unix BSD
Noyau : 5.10.0 amd64 i386 + 6.1.0 amd64 i386
(G)UI : Gnome/Mate/Cinnamon/KDE sous FreeBSD
Inscription : 15-12-2013

Re : Partage Samba

wins support = no, c'est pour prendre en compte ou pas un serveur WINS (Windows Internet Name Service) mais désormais c'est Active Directory qui est utilisé

L'important n'est pas la chute mais l'atterrissage...
Chapardeur de chocolat DF!!!
Admin un jour, admin toujours...
Utilisateur de plusieurs OS de type Unix comme GNU/Linux, Système BSD (FreeBSD, OpenBSD, NetBSD), Système Solaris (OpenIndiana et divers autres distrib du projet ILLUMOS) . I love Unix !!!

Hors ligne

#3 06-08-2019 15:31:49

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Partage Samba

OK. Je corrige wink

Hors ligne

#4 13-08-2019 12:33:47

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Partage Samba

Bonjour à tous.

Ben là, je ne comprends plus du tout.
Les bécanes Linux voient leurs partages, mais PLUS la bécane Windows. Elle ne voit même plus les partages Samba sur le réseau...

Mon smb.conf :


#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = WORKGROUP
netbios name = Deb-1155
hosts allow = 192.168.0.37 192.168.0.19
# .37 : Windows .19 : le 1155 sous Linux
security = user


# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
# TRADUCTION
# Autoriser les utilisateurs ayant reçu des privilèges d’utilisateurs à créer des
# partages publics, pas seulement authentifiés
   usershare allow guests = yes

#======================= Share Definitions =======================

[Partage-sur-1150] # Ce qui apparaîtra sur le réseau
comment = Dossier public
path = /home/partage/Public
browseable = yes
public = yes
writable = yes
read only = no
# valid users =  A voir ! Page 2 du fichier "Etapes-tuto-boireau.odt"


[homes]
   comment = Home Directories
   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes

# TRADUTION
# Par défaut, les partages \\ serveur \ nom d'utilisateur peuvent être connectés par n'importe qui
# avec accès au serveur samba.
# Le paramètre suivant permet de s'assurer que seul "nom d'utilisateur" peut se connecter à \\ server \ username
# Cela peut nécessiter des ajustements lors de l'utilisation de schémas d'authentification externes

   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
# TRADUCTION
# Supprimer les commentaires suivants et créer le répertoire netlogon pour les ouvertures de session dans le domaine
# (vous devez également configurer Samba pour qu’il agisse également comme contrôleur de domaine.)

;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on

# TRADUCTION
# Supprimer les commentaires suivants et créer le répertoire de profils à stocker
# profils d'utilisateurs (voir l'option "chemin d'accès" ci-dessus)
# (vous devez également configurer Samba pour qu’il agisse également comme contrôleur de domaine.)
# Le chemin ci-dessous doit être accessible en écriture pour tous les utilisateurs afin que leur
# le répertoire du profil peut être créé lors de la première connexion

;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
# TRADUCTION
# Les clients Windows recherchent ce nom de partage comme source de fichiers téléchargeables.
# pilotes d'imprimante
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
# TRADUCTION
# Décommenter pour permettre l'administration à distance des pilotes d'impression Windows.
# Vous devrez peut-être remplacer "lpadmin" par le nom du groupe que vous avez choisi.
# utilisateurs admin sont membres de.
# Veuillez noter que vous devez également définir les autorisations Unix appropriées.
# au répertoire des pilotes pour que ces utilisateurs puissent y avoir des droits en écriture

;   write list = root, @lpadmin


 



Qu'est-ce qui arrive ?

Hors ligne

#5 13-08-2019 16:20:41

anonyme
Invité

Re : Partage Samba

Bonjour
ici tu peu mettre le masque de sous réseau et le nom de la carte réseau (ou uniquement le nom de la carte réseau )


#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0
 


il faut enlever le ";" devant
un exemple


interfaces = 192.168.1.0/24 eth0
 


ou simplement (ce qui est conseillé =>  # interface names are normally preferred )


interfaces = eth0
 



ps: tu remplace "eth0" par le vrai nom de ta carte réseau

#6 13-08-2019 17:26:11

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Partage Samba

Bonjour, anonyme.
Ca ne change rien du tout.

ifconfig retourne :



enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.19  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::f66d:4ff:fe20:f990  prefixlen 64  scopeid 0x20<link>
        inet6 2a01:e35:2ef3:4080:900b:8304:d0fb:ffb9  prefixlen 64  scopeid 0x0<global>
        inet6 2a01:e35:2ef3:4080:f66d:4ff:fe20:f990  prefixlen 64  scopeid 0x0<global>
        ether f4:6d:04:20:f9:90  txqueuelen 1000  (Ethernet)
        RX packets 1625  bytes 1060768 (1.0 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 957  bytes 116510 (113.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Boucle locale)
        RX packets 216  bytes 17196 (16.7 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 216  bytes 17196 (16.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 



       
J'ai essayé ça :



#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# D'abord ça :
;interfaces = 127.0.0.0/8 enp4s0;

#Puis ça (actuellement):
interfaces = enp4s0
 



Rien n'a changé. Windows ne voit pas le partage.
Je ne l'avais d'ailleurs pas fait au début, selon le tuto de Boireau, qui ne le prévoyait pas. scratchhead.gif

Pire : je viens de créer un partage sur une autre Debian... même procédure, même smb.conf (sauf le netbios name) : idem.
Exploitable par les UC Linux, pas Windows...

19 H 13 : mon portable sous Win8 non plus ne les voit pas. Ca ne peut donc pas venir de la tour 192.168.0.37 sous Win8 elle aussi.

Dernière modification par Lupa (13-08-2019 18:14:36)

Hors ligne

#7 14-08-2019 08:40:51

Lupa
Membre
Distrib. : Debian Stretch 4.9.110-3+deb9u6 / Buster
Noyau : 4.9.0-8-amd64 (Stretch) Buster : 5.4.0-0.bpo.2-amd
(G)UI : xfce
Inscription : 28-06-2017

Re : Partage Samba

Pigé !
Je pense que c'est la box.

Ce matin, ça re-fonctionne, et avec les smb.conf initiaux.

A l'exception de l'un des partages Linux, je les vois, à nouveau.
Quant au serveur, il me faut parfois le redémarrer pour pouvoir surfer et télécharger normalement : il me bouffe la bande passante. Et ça fait un moment que ça dure.

Une restauration usine lui ferait peut-être du bien ?
Comment expliquer qu'hier je ne voyais RIEN, et qu'à présent ça va un peu mieux ?

Hors ligne

Pied de page des forums