Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 10-04-2011 00:06:09

Gabe
Membre
Distrib. : Testing minimale
(G)UI : Gnome
Inscription : 09-04-2011

[Resolu]Systeme figé

Bonjour

J' utilise debian testing 64 minimale sur un pc: carte mere gigabite, processeur AMD 64 3000,
et 2G de ram, en dual boot avec windows xp.Tout fonctionnait parfaitement mais il y a un mois
le système est devenu instable et se figeait après quelque minutes et paralysait totalement
le pc, même le pavé numérique ne fonctionnait pas.Après plusieurs essais :test de la mémoire,
test du disque dur,supression de tout le materiel non indispensable je me vois contrains de reinstaller mais sans succès même avec la version stable et avec ubuntu.

Je precise que windows XP et Fedora 14 que j'ai installé par la suite fonctionnent très bien, mais ma debian me manque et toute piste sera la bienvenue. Merci de votre attention.

Dernière modification par Gabe (22-05-2011 20:51:53)

Hors ligne

#2 11-04-2011 03:38:31

Clem
Membre
Lieu : Au coin du bois
Distrib. : Stable && Sid
Noyau : 3.16-2 & 3.17-1 *-amd-64
(G)UI : XMonad & Mate(?)
Inscription : 09-03-2010

Re : [Resolu]Systeme figé

Bonsoir, un

dpkg --reconfigure -a


Cela change quelque chose??

Edit = Arghleuh, je me suis trompé de fil ;  toutes mes  excuses yikes

=====>[]

Dernière modification par Clem (11-04-2011 08:45:13)


Moi, je suis PC (x86_64) et formater windows, c'était MON idée
Le sommeil de la raison ...

Hors ligne

#3 11-04-2011 08:15:48

Thuban
Modérateur
Distrib. : OpenBSD
Noyau : current
(G)UI : xfce ou dwm
Inscription : 09-01-2009
Site Web

Re : [Resolu]Systeme figé

Ah ouais, tout reconfigurer carrément, tu es un malade toi clem wink .

Gabe, pourrais-tu nous donner le résultat de dmesg s'il te plaît?

YA3HGA-H

Hors ligne

#4 13-04-2011 06:07:06

Gabe
Membre
Distrib. : Testing minimale
(G)UI : Gnome
Inscription : 09-04-2011

Re : [Resolu]Systeme figé

Merci pour votre attention.
Je réinstalle le système et je m' occupe de tout ca dès que je trouve un moment.

Hors ligne

#5 16-04-2011 22:39:04

Gabe
Membre
Distrib. : Testing minimale
(G)UI : Gnome
Inscription : 09-04-2011

Re : [Resolu]Systeme figé

Bonjour

Après réinstallation voici le résultat de dmseg

[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258347
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=1e5c088c-0b7e-4a73-bf47-b7948147e118 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] AGP bridge at 00:00:00
[    0.000000] Aperture from AGP @ e8000000 old size 32 MB
[    0.000000] Aperture from AGP @ e8000000 size 64 MB (APSIZE f30)
[    0.000000] Node 0: aperture @ e8000000 size 64 MB
[    0.000000] Memory: 1017748k/1048512k available (3080k kernel code, 388k absent, 30376k reserved, 1891k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:256
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2009.518 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4019.03 BogoMIPS (lpj=8038072)
[    0.004042] Security Framework initialized
[    0.004052] SELinux:  Disabled at boot.
[    0.004165] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005268] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.005824] Mount-cache hash table entries: 256
[    0.006041] Initializing cgroup subsys ns
[    0.006046] Initializing cgroup subsys cpuacct
[    0.006050] Initializing cgroup subsys devices
[    0.006054] Initializing cgroup subsys freezer
[    0.006056] Initializing cgroup subsys net_cls
[    0.006091] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.006094] CPU: L2 Cache: 512K (64 bytes/line)
[    0.006097] CPU 0/0x0 -> Node 0
[    0.006099] tseg: 0000000000
[    0.006120] mce: CPU supports 5 MCE banks
[    0.006138] Performance Events: AMD PMU driver.
[    0.006145] ... version:                0
[    0.006147] ... bit width:              48
[    0.006148] ... generic registers:      4
[    0.006150] ... value mask:             0000ffffffffffff
[    0.006152] ... max period:             00007fffffffffff
[    0.006154] ... fixed-purpose events:   0
[    0.006156] ... event mask:             000000000000000f
[    0.006171] SMP alternatives: switching to UP code
[    0.012799] Freeing SMP alternatives: 28k freed
[    0.012819] ACPI: Core revision 20090903
[    0.018830] Setting APIC routing to flat
[    0.019653] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.059351] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[    0.060001] Brought up 1 CPUs
[    0.060001] Total of 1 processors activated (4019.03 BogoMIPS).
[    0.060001] CPU0 attaching NULL sched-domain.
[    0.060001] devtmpfs: initialized
[    0.060117] regulator: core version 0.5
[    0.060174] NET: Registered protocol family 16
[    0.060297] node 0 link 0: io port [1000, fffff]
[    0.060301] TOM: 0000000040000000 aka 1024M
[    0.060304] node 0 link 0: mmio [a0000, bffff]
[    0.060307] node 0 link 0: mmio [40000000, ffb7ffff]
[    0.060310] bus: [00,ff] on node 0 link 0
[    0.060313] bus: 00 index 0 io port: [0, ffff]
[    0.060315] bus: 00 index 1 mmio: [a0000, bffff]
[    0.060318] bus: 00 index 2 mmio: [40000000, fcffffffff]
[    0.060324] ACPI: bus type pci registered
[    0.060387] PCI: Using configuration type 1 for base access
[    0.060830] bio: create slab <bio-0> at 0
[    0.061269] ACPI: EC: Look up EC in DSDT
[    0.063560] ACPI Warning: Package List length (0x6) larger than NumElements count (0x3), truncated
[    0.063564]  (20090903/dsobject-515)
[    0.066491] ACPI: Interpreter enabled
[    0.066498] ACPI: (supports S0 S1 S4 S5)
[    0.066524] ACPI: Using IOAPIC for interrupt routing
[    0.071154] ACPI: No dock devices found.
[    0.071267] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.071323] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff]
[    0.071559] pci 0000:00:01.0: supports D1
[    0.071601] pci 0000:00:0f.0: reg 10 io port: [0x9000-0x9007]
[    0.071608] pci 0000:00:0f.0: reg 14 io port: [0x9400-0x9403]
[    0.071614] pci 0000:00:0f.0: reg 18 io port: [0x9800-0x9807]
[    0.071620] pci 0000:00:0f.0: reg 1c io port: [0x9c00-0x9c03]
[    0.071627] pci 0000:00:0f.0: reg 20 io port: [0xa000-0xa00f]
[    0.071633] pci 0000:00:0f.0: reg 24 io port: [0xa400-0xa4ff]
[    0.071697] pci 0000:00:0f.1: reg 20 io port: [0xa800-0xa80f]
[    0.071770] pci 0000:00:10.0: reg 20 io port: [0xac00-0xac1f]
[    0.071794] pci 0000:00:10.0: supports D1 D2
[    0.071797] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.071801] pci 0000:00:10.0: PME# disabled
[    0.071845] pci 0000:00:10.1: reg 20 io port: [0xb000-0xb01f]
[    0.071868] pci 0000:00:10.1: supports D1 D2
[    0.071871] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.071874] pci 0000:00:10.1: PME# disabled
[    0.071920] pci 0000:00:10.2: reg 20 io port: [0xb400-0xb41f]
[    0.071945] pci 0000:00:10.2: supports D1 D2
[    0.071947] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.071951] pci 0000:00:10.2: PME# disabled
[    0.072011] pci 0000:00:10.3: reg 20 io port: [0xb800-0xb81f]
[    0.072035] pci 0000:00:10.3: supports D1 D2
[    0.072038] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.072042] pci 0000:00:10.3: PME# disabled
[    0.072071] pci 0000:00:10.4: reg 10 32bit mmio: [0xee000000-0xee0000ff]
[    0.072110] pci 0000:00:10.4: supports D1 D2
[    0.072113] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.072117] pci 0000:00:10.4: PME# disabled
[    0.072172] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.072219] pci 0000:00:11.5: reg 10 io port: [0xbc00-0xbcff]
[    0.072258] pci 0000:00:11.5: supports D1 D2
[    0.072290] pci 0000:00:12.0: reg 10 io port: [0xc000-0xc0ff]
[    0.072296] pci 0000:00:12.0: reg 14 32bit mmio: [0xee001000-0xee0010ff]
[    0.072332] pci 0000:00:12.0: supports D1 D2
[    0.072334] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.072338] pci 0000:00:12.0: PME# disabled
[    0.072435] pci 0000:01:00.0: reg 10 32bit mmio: [0xec000000-0xecffffff]
[    0.072441] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xe7ffffff]
[    0.072456] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.072503] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff]
[    0.072507] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
[    0.072517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.109831] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.109985] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[    0.110146] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[    0.110280] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.110411] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.110535] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.110659] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.110784] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.110980] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[    0.111173] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[    0.111385] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[    0.111575] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[    0.111705] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.111708] vgaarb: loaded
[    0.111821] PCI: Using ACPI for IRQ routing
[    0.111831] pci 0000:00:00.0: BAR 0: address space collision on of device [0xe8000000-0xebffffff]
[    0.111898] pci 0000:00:00.0: BAR 0: can't allocate resource
[    0.112107] Switching to clocksource tsc
[    0.113409] pnp: PnP ACPI init
[    0.113438] ACPI: bus type pnp registered
[    0.113771] pnp 00:00: mem resource (0xf0000-0xf3fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.113775] pnp 00:00: mem resource (0xf4000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.113779] pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.113783] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.113787] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.113791] pnp 00:00: mem resource (0x100000-0x3ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[    0.116601] pnp: PnP ACPI: found 12 devices
[    0.116603] ACPI: ACPI bus type pnp unregistered
[    0.116617] system 00:00: iomem range 0x3fff0000-0x3fffffff could not be reserved
[    0.116621] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[    0.116624] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.116628] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.116631] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[    0.116638] system 00:02: ioport range 0x4000-0x407f has been reserved
[    0.116641] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[    0.116644] system 00:02: ioport range 0x5000-0x500f has been reserved
[    0.116650] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[    0.116653] system 00:03: ioport range 0x290-0x29f has been reserved
[    0.116656] system 00:03: ioport range 0x800-0x805 has been reserved
[    0.121438] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.121440] pci 0000:00:01.0:   IO window: disabled
[    0.121445] pci 0000:00:01.0:   MEM window: 0xec000000-0xedffffff
[    0.121450] pci 0000:00:01.0:   PREFETCH window: 0xe0000000-0xe7ffffff
[    0.121464] pci 0000:00:01.0: setting latency timer to 64
[    0.121470] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.121473] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.121476] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff]
[    0.121479] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[    0.121524] NET: Registered protocol family 2
[    0.121649] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.122332] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[    0.124679] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.125830] TCP: Hash tables configured (established 131072 bind 65536)
[    0.125835] TCP reno registered
[    0.125980] NET: Registered protocol family 1
[    0.125999] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.126014] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.126113] pci 0000:01:00.0: Boot video device
[    0.126184] Unpacking initramfs...
[    0.380296] Freeing initrd memory: 8888k freed
[    0.390378] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[    0.392944] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[    0.393292] audit: initializing netlink socket (disabled)
[    0.393308] type=2000 audit(1302984194.391:1): initialized
[    0.396564] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.398126] VFS: Disk quotas dquot_6.5.2
[    0.398188] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.398283] msgmni has been set to 2005
[    0.398478] alg: No test for stdrng (krng)
[    0.398537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.398540] io scheduler noop registered
[    0.398542] io scheduler anticipatory registered
[    0.398544] io scheduler deadline registered
[    0.398579] io scheduler cfq registered (default)
[    0.400289] Linux agpgart interface v0.103
[    0.400336] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.400430] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.400520] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.400811] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.400930] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.401073] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.401136] PNP: No PS/2 controller found. Probing ports directly.
[    0.401632] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.401639] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.401767] mice: PS/2 mouse device common for all mice
[    0.401816] rtc_cmos 00:05: RTC can wake from S4
[    0.401863] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.401916] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.401929] cpuidle: using governor ladder
[    0.401931] cpuidle: using governor menu
[    0.401937] No iBFT detected.
[    0.402324] TCP cubic registered
[    0.402460] NET: Registered protocol family 10
[    0.403336] Mobile IPv6
[    0.403339] NET: Registered protocol family 17
[    0.403427] PM: Resume from disk failed.
[    0.403449] registered taskstats version 1
[    0.403765] rtc_cmos 00:05: setting system clock to 2011-04-16 20:03:15 UTC (1302984195)
[    0.403798] Initalizing network drop monitor service
[    0.403868] Freeing unused kernel memory: 592k freed
[    0.404385] Write protecting the kernel read-only data: 4236k
[    0.430833] udev[48]: starting version 164
[    0.627232] SCSI subsystem initialized
[    0.650084] libata version 3.00 loaded.
[    0.672290] Floppy drive(s): fd0 is 1.44M
[    0.675510] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    0.675691] usbcore: registered new interface driver usbfs
[    0.675847] usbcore: registered new interface driver hub
[    0.675987] sata_via 0000:00:0f.0: version 2.4
[    0.676315] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    0.676318] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    0.676325]   alloc irq_desc for 20 on node 0
[    0.676327]   alloc kstat_irqs on node 0
[    0.676338] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.676386] sata_via 0000:00:0f.0: routed to hard irq line 11
[    0.676479] usbcore: registered new device driver usb
[    0.679005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.679401] scsi0 : sata_via
[    0.679583] scsi1 : sata_via
[    0.679631] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 20
[    0.679634] ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 20
[    0.679943] pata_via 0000:00:0f.1: version 0.3.4
[    0.679964] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.680178] scsi2 : pata_via
[    0.680296] scsi3 : pata_via
[    0.681963] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
[    0.681966] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
[    0.682478] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[    0.682481] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[    0.682487]   alloc irq_desc for 23 on node 0
[    0.682489]   alloc kstat_irqs on node 0
[    0.682498] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23
[    0.683356] eth0: VIA Rhine II at 0x1c000, 00:16:e6:5e:65:5c, IRQ 23.
[    0.684068] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[    0.684615] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[    0.684618] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    0.684624]   alloc irq_desc for 21 on node 0
[    0.684626]   alloc kstat_irqs on node 0
[    0.684634] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.684658] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.684692] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.684774] ehci_hcd 0000:00:10.4: irq 21, io mem 0xee000000
[    0.691695] FDC 0 is a post-1991 82077
[    0.695927] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.695978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.695981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.695984] usb usb1: Product: EHCI Host Controller
[    0.695986] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    0.695989] usb usb1: SerialNumber: 0000:00:10.4
[    0.696093] usb usb1: configuration #1 chosen from 1 choice
[    0.696132] hub 1-0:1.0: USB hub found
[    0.696144] hub 1-0:1.0: 8 ports detected
[    0.762785] uhci_hcd: USB Universal Host Controller Interface driver
[    0.762889] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.762903] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.762923] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.762954] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ac00
[    0.763013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.763016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.763019] usb usb2: Product: UHCI Host Controller
[    0.763021] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.763024] usb usb2: SerialNumber: 0000:00:10.0
[    0.764258] usb usb2: configuration #1 chosen from 1 choice
[    0.764419] hub 2-0:1.0: USB hub found
[    0.764432] hub 2-0:1.0: 2 ports detected
[    0.765100] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.765115] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.765133] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.765164] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000
[    0.765218] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.765221] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.765224] usb usb3: Product: UHCI Host Controller
[    0.765226] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.765229] usb usb3: SerialNumber: 0000:00:10.1
[    0.765386] usb usb3: configuration #1 chosen from 1 choice
[    0.765459] hub 3-0:1.0: USB hub found
[    0.765470] hub 3-0:1.0: 2 ports detected
[    0.767298] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.767315] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.767341] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.767375] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400
[    0.767442] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.767445] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.767448] usb usb4: Product: UHCI Host Controller
[    0.767450] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.767452] usb usb4: SerialNumber: 0000:00:10.2
[    0.767619] usb usb4: configuration #1 chosen from 1 choice
[    0.767681] hub 4-0:1.0: USB hub found
[    0.767691] hub 4-0:1.0: 2 ports detected
[    0.767852] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[    0.767859] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.767869] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.767892] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800
[    0.767932] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.767935] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.767938] usb usb5: Product: UHCI Host Controller
[    0.767940] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[    0.767943] usb usb5: SerialNumber: 0000:00:10.3
[    0.768047] usb usb5: configuration #1 chosen from 1 choice
[    0.768103] hub 5-0:1.0: USB hub found
[    0.768111] hub 5-0:1.0: 2 ports detected
[    0.883793] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    0.904443] ata3.00: HPA detected: current 156299375, native 156301488
[    0.904449] ata3.00: ATA-6: ST380011A, 8.01, max UDMA/100
[    0.904452] ata3.00: 156299375 sectors, multi 16: LBA48
[    0.920154] ata3.00: configured for UDMA/100
[    1.092007] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    1.102747] scsi 2:0:0:0: Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5
[    1.124012] usb 1-6: new high speed USB device using ehci_hcd and address 3
[    1.272381] usb 1-6: New USB device found, idVendor=0ea0, idProduct=2168
[    1.272384] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.272387] usb 1-6: Product: Flash Disk      
[    1.272389] usb 1-6: Manufacturer: USB    
[    1.272391] usb 1-6: SerialNumber: 106C11415B6A1909
[    1.272470] usb 1-6: configuration #1 chosen from 1 choice
[    1.273077] ata4.01: ATAPI: PIONEER DVD-RW DVR-109RD, 1.50, max UDMA/66
[    1.281913] Initializing USB Mass Storage driver...
[    1.282046] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.282178] usbcore: registered new interface driver usb-storage
[    1.282181] USB Mass Storage support registered.
[    1.282300] usb-storage: device found at 3
[    1.282302] usb-storage: waiting for device to settle before scanning
[    1.288296] ata4.01: configured for UDMA/66
[    1.291359] scsi 3:0:1:0: CD-ROM            PIONEER  DVD-RW DVR-109RD 1.50 PQ: 0 ANSI: 5
[    1.318379] sd 2:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.318435] sd 2:0:0:0: [sda] Write Protect is off
[    1.318438] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.318460] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.318599]  sda:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.326005] Uniform CD-ROM driver Revision: 3.20
[    1.326288] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    1.369423]  sda1 sda2 < sda5 sda6 >
[    1.394569] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.407582] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.407930] sr 3:0:1:0: Attached scsi generic sg1 type 5
[    1.624021] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    1.799102] usb 3-1: New USB device found, idVendor=1019, idProduct=0c55
[    1.799107] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.799111] usb 3-1: Product: USB Storage Device
[    1.799113] usb 3-1: Manufacturer: ICneric
[    1.799115] usb 3-1: SerialNumber: 0AEC305000001A000
[    1.799233] usb 3-1: configuration #1 chosen from 1 choice
[    1.804133] scsi5 : SCSI emulation for USB Mass Storage devices
[    1.805028] usb-storage: device found at 2
[    1.805032] usb-storage: waiting for device to settle before scanning
[    1.848737] PM: Starting manual resume from disk
[    1.848744] PM: Resume from partition 8:5
[    1.848746] PM: Checking hibernation image.
[    1.848990] PM: Error -22 checking image file
[    1.848993] PM: Resume from disk failed.
[    1.866855] EXT3-fs: INFO: recovery required on readonly filesystem.
[    1.866860] EXT3-fs: write access will be enabled during recovery.
[    2.044014] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    2.223783] usb 5-1: New USB device found, idVendor=1631, idProduct=5000
[    2.223789] usb 5-1: New USB device strings: Mfr=4, Product=12, SerialNumber=0
[    2.223792] usb 5-1: Product: USB Multimedia Keyboard
[    2.223794] usb 5-1: Manufacturer: BTC
[    2.223927] usb 5-1: configuration #1 chosen from 1 choice
[    2.243303] usbcore: registered new interface driver hiddev
[    2.257254] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input1
[    2.257361] generic-usb 0003:1631:5000.0001: input,hidraw0: USB HID v1.00 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:10.3-1/input0
[    2.282370] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.1/input/input2
[    2.282731] generic-usb 0003:1631:5000.0002: input,hiddev0,hidraw1: USB HID v1.00 Device [BTC USB Multimedia Keyboard] on usb-0000:00:10.3-1/input1
[    2.282772] usbcore: registered new interface driver usbhid
[    2.282880] usbhid: v2.6:USB HID core driver
[    2.464011] usb 5-2: new low speed USB device using uhci_hcd and address 3
[    2.640730] usb 5-2: New USB device found, idVendor=046d, idProduct=c03e
[    2.640734] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.640737] usb 5-2: Product: USB-PS/2 Optical Mouse
[    2.640739] usb 5-2: Manufacturer: Logitech
[    2.640846] usb 5-2: configuration #1 chosen from 1 choice
[    2.657117] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2:1.0/input/input3
[    2.657256] generic-usb 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.3-2/input0
[    6.280365] usb-storage: device scan complete
[    6.281087] scsi 4:0:0:0: Direct-Access     Generic  USB Flash Disk   2.00 PQ: 0 ANSI: 2
[    6.282194] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.283216] sd 4:0:0:0: [sdb] 1023488 512-byte logical blocks: (524 MB/499 MiB)
[    6.283818] sd 4:0:0:0: [sdb] Write Protect is off
[    6.283822] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    6.283824] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    6.288570] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    6.288636]  sdb:
[    6.291326] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    6.291393] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    6.805607] usb-storage: device scan complete
[    6.808584] scsi 5:0:0:0: Direct-Access     IC       USB Storage-CFC  322E PQ: 0 ANSI: 0 CCS
[    6.811571] scsi 5:0:0:1: Direct-Access     IC       USB Storage-SMC  322E PQ: 0 ANSI: 0 CCS
[    6.814570] scsi 5:0:0:2: Direct-Access     IC       USB Storage-MMC  322E PQ: 0 ANSI: 0 CCS
[    6.817570] scsi 5:0:0:3: Direct-Access     IC       USB Storage-MSC  322E PQ: 0 ANSI: 0 CCS
[    6.818610] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    6.819183] sd 5:0:0:1: Attached scsi generic sg4 type 0
[    6.819840] sd 5:0:0:2: Attached scsi generic sg5 type 0
[    6.820445] sd 5:0:0:3: Attached scsi generic sg6 type 0
[    6.832606] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    6.837750] sd 5:0:0:1: [sdd] Attached SCSI removable disk
[    6.853613] sd 5:0:0:2: [sde] Attached SCSI removable disk
[    6.858607] sd 5:0:0:3: [sdf] Attached SCSI removable disk
[    9.401483] kjournald starting.  Commit interval 5 seconds
[    9.401502] EXT3-fs: recovery complete.
[    9.415951] EXT3-fs: mounted filesystem with ordered data mode.
[   10.762942] udev[372]: starting version 164
[   11.125418] processor LNXCPU:00: registered as cooling_device0
[   11.219074] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.270315] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[   11.270325] ACPI: Power Button [PWRB]
[   11.270414] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   11.270418] ACPI: Power Button [PWRF]
[   11.853847] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   11.856808] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.274758] [drm] Initialized drm 1.1.0 20060810
[   12.591729]   alloc irq_desc for 16 on node 0
[   12.591734]   alloc kstat_irqs on node 0
[   12.591745] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.597756] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018500c1)
[   12.597848] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[   12.752220] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   12.752469] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   12.752472] [drm] nouveau 0000:01:00.0: BMP version 5.40
[   12.752475] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.36
[   12.752479] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[   12.752484] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00009c40
[   12.752488] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00009c00
[   12.752491] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02020321 00000333
[   12.752646] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[   12.752650] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED3F
[   12.764596] EDAC MC: Ver: 2.1.0 Mar  7 2011
[   12.776048] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF237
[   12.776076] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEEC1
[   12.796035] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF5AA
[   12.796048] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF5C7
[   12.796054] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF0AC
[   12.820028] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF1D2
[   12.830699] [TTM] Zone  kernel: Available graphics memory: 513632 kiB.
[   12.830715] [drm] nouveau 0000:01:00.0: 128 MiB VRAM
[   12.830776] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[   12.830789] agpgart: work_for_cpu tried to set rate=x12. Setting to AGP3 x8 mode.
[   12.830796] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[   12.830861] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[   12.830864] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[   12.831140] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[   12.831442] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[   12.831527] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[   12.831535] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[   12.877855] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[   12.878066] [drm] nouveau 0000:01:00.0: Detected a TV connector
[   12.879541] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[   12.879546] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[   12.879549] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[   13.028237] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003f3f3600
[   13.693904] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[   13.693911] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[   13.696369] Console: switching to colour frame buffer device 160x64
[   13.698763] fb0: nouveaufb frame buffer device
[   13.698765] registered panic notifier
[   13.698775] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[   13.729293] EDAC amd64_edac:  Ver: 3.2.0 Mar  7 2011
[   13.729663] parport_pc 00:0b: reported by Plug and Play ACPI
[   13.729709] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   13.732995] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[   13.733005] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   13.733006]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   13.733008]  (Note that use of the override may cause unknown side effects.)
[   13.733040] amd64_edac: probe of 0000:00:18.2 failed with error -22
[   14.178012] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   14.178017] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   14.178024]   alloc irq_desc for 22 on node 0
[   14.178027]   alloc kstat_irqs on node 0
[   14.178038] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   14.178205] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   15.549421] Adding 2004984k swap on /dev/sda5.  Priority:-1 extents:1 across:2004984k
[   15.818911] EXT3 FS on sda1, internal journal
[   15.919167] loop: module loaded
[   33.554593] kjournald starting.  Commit interval 5 seconds
[   33.554865] EXT3 FS on sda6, internal journal
[   33.554871] EXT3-fs: mounted filesystem with ordered data mode.
[   34.116133] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   34.204119] fuse init (API version 7.13)
[   36.538482] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[   36.538588] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x2
[   36.538591] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6
[   36.538593] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[   36.560116] Marking TSC unstable due to cpufreq changes
[   36.560182] Switching to clocksource acpi_pm
[   38.931406] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[   38.931859] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[   44.272039] eth0: no IPv6 routers present
[   53.238764] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!


Les freezes se produisent surtout lors de l'exécution d'applications telles que synaptic
Merci pour votre aide.

Hors ligne

#6 16-04-2011 23:05:05

Haricophile
Adhérent(e)
Lieu : Pignans (Var)
Distrib. : SID
Noyau : 4.0.0-1-amd64
(G)UI : Mate / i3 selon...
Inscription : 14-09-2009

Re : [Resolu]Systeme figé

Testing ce n'est pas vraiement une version de production, surtout en ce moment je dirais (-_-);

Par curiosité, as-tu un dossier /run ? Si oui supprime le.


En regardant mieux il y a aussi un warning bizarre sur l'acpi, je ne sais pas si ça peut avoir un rapport, mais ça ne coûte pas grand chose de démarrer avec noacpi dans les options du kernel pour essayer.

Dernière modification par Haricophile (16-04-2011 23:13:03)


« La religion et l'art sont les luxes des lâches, qui permettent de fuir la réalité quand elle devient trop difficile à affronter. La différence c'est que la religion transforme tout mensonge en vérité alors que l'art transforme toute vérité en mensonge. »

Hors ligne

#7 17-04-2011 07:41:51

Thuban
Modérateur
Distrib. : OpenBSD
Noyau : current
(G)UI : xfce ou dwm
Inscription : 09-01-2009
Site Web

Re : [Resolu]Systeme figé

Le dmesg que tu nous as donné est celui d'avant un freeze ou après?

YA3HGA-H

Hors ligne

#8 17-04-2011 19:06:50

Gabe
Membre
Distrib. : Testing minimale
(G)UI : Gnome
Inscription : 09-04-2011

Re : [Resolu]Systeme figé

Le dmesg était entre 2 freezes car je reste rarement plus de dix minutes sans freeze.
Pour info il s' agit de la version stable (squeeze) car la testing buggait dès le demarrage.
Je n'ai pas de dossier run mais je vais essayer de désactiver l' acpi.

Hors ligne

#9 22-05-2011 19:10:37

Gabe
Membre
Distrib. : Testing minimale
(G)UI : Gnome
Inscription : 09-04-2011

Re : [Resolu]Systeme figé

Bonjour tout le monde
Je remonte ce vieux post car après plusieurs tentatives de réparations et de réinstallation j'avais délaissé Debian pour Fedora. Mais dans une ultime tentative j' ai réinstallé Debian avec l' environnement Kde et là, surprise, plus de frezze.
Je n' ai aucune explication mais finalement mon système est stable et Kde n' est pas si mal.

Hors ligne

#10 22-05-2011 19:18:48

Invité-5
Banni(e)

Re : [Resolu]Systeme figé

Tout est bien, qui finit bien. Il te reste à mettre résolu.

Pied de page des forums