Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 11-06-2012 14:21:38

nervus70
Membre
Inscription : 12-03-2012

Partition principale en read-only après montage d'un second disque dur

Bonjour,

j'ai installé un disque dur de 1.5 To en plus du disque dur SSD sur le quel est installé linux.

Le problème c'est qu'après reboot du serveur, le SSD s'est mis en read-only, et je ne peux plus rien changer à la configuration...

Voilà ce que contient /etc/fstab :

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=711c647d-9599-4c2b-a7af-f8b60832a28b /               ext3    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=31c07095-1391-4696-b7a2-7cc0545d46ae none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/sdc1       /media/usb0     auto    rw,user,noauto  0       0
/dev/sdb1       /data   ext3    defaults        0       2


moi j'ai rajouté la ligne en gras.

A noter que le disque dur que j'ai rajouté lui fonctionne en lecture et écriture...

J'ai essayer diverses solutions trouvées sur le net mais rien n'y fait.

J'suis bloqué.

je peux même pas modifier le fstab, car ça me dit read-only sad

Que faire ?

Merci à vous

Dernière modification par nervus70 (11-06-2012 14:34:36)

Hors ligne

#2 11-06-2012 14:32:48

smolski
administrateur quasi...modo
Lieu : AIN
Distrib. : 8 (jessie) 64 bits + backports
Noyau : 4.6.0-0.bpo.1-amd64
(G)UI : gnome 3.14.1
Inscription : 21-10-2008

Re : Partition principale en read-only après montage d'un second disque dur

Dans mon fstab, la ligne de la racine :

# / was on /dev/sda2 during installation
UUID=b9caae12-b938-4e38-b210-0d69613e5ecf /               ext4    errors=remount-ro 0       1


"Définition d'eric besson : S'il fallait en chier des tonnes pour devenir ministre, il aurait 2 trous du cul." - JP Douillon
"L'utopie ne signifie pas l'irréalisable, mais l'irréalisée." - T Monod (source :  La zone de Siné)
"Je peux rire de tout mais pas avec n'importe qui." - P Desproges
"saque eud dun" (patois chtimi : fonce dedans)

En ligne

#3 11-06-2012 14:35:22

nervus70
Membre
Inscription : 12-03-2012

Re : Partition principale en read-only après montage d'un second disque dur

smolski a écrit :

Dans mon fstab, la ligne de la racine :

# / was on /dev/sda2 during installation
UUID=b9caae12-b938-4e38-b210-0d69613e5ecf /               ext4    errors=remount-ro 0       1


Oui j'ai la même chose que toi le texte était croppé, j'ai regardé les logs mais je ne vois pas d'erreurs ?!

Hors ligne

#4 11-06-2012 14:42:16

nervus70
Membre
Inscription : 12-03-2012

Re : Partition principale en read-only après montage d'un second disque dur

Voilà le contenu de /var/log/boot :


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 05:12:07 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=711c647d-9599-4c2b-a7af-f8b60832a28b ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfe70000 (usable)
[    0.000000]  BIOS-e820: 00000000dfe70000 - 00000000dfe88000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dfedc000 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[    0.000000] DMI 2.6 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000dfe70000
[    0.000000]  0000000000 - 00dfe00000 page 2M
[    0.000000]  00dfe00000 - 00dfe70000 page 4k
[    0.000000] kernel direct mapping tables up to dfe70000 @ 10000-16000
[    0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[    0.000000]  0100000000 - 0220000000 page 2M
[    0.000000] kernel direct mapping tables up to 220000000 @ 14000-1e000
[    0.000000] RAMDISK: 3777c000 - 37fef678
[    0.000000] ACPI: RSDP 00000000000fb920 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000dfe70000 00044 (v01 073010 RSDT1656 20100730 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000dfe70200 00084 (v01 073010 FACP1656 20100730 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000dfe704a0 0EF15 (v01  A1511 A1511001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000dfe88000 00040
[    0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 073010 APIC1656 20100730 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 073010 OEMMCFG  20100730 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 073010 OEMB1656 20100730 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000dfe7f3c0 00038 (v01 073010 OEMHPET  20100730 MSFT 00000097)
[    0.000000] ACPI: ASPT 00000000dfe7f660 00034 (v06 073010 PerfTune 20100730 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000dfe7f6a0 000B0 (v01 073010 OEMOSFR  20100730 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000dfe8ad80 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000220000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000220000000
[    0.000000]   NODE_DATA [0000000000019000 - 0000000000020fff]
[    0.000000]   bootmap [0000000000021000 -  0000000000064fff] pages 44
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0220000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00016d55c4]    TEXT DATA BSS ==> [0001000000 - 00016d55c4]
[    0.000000]   #3 [003777c000 - 0037fef678]          RAMDISK ==> [003777c000 - 0037fef678]
[    0.000000]   #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
[    0.000000]   #5 [00016d6000 - 00016d62c0]              BRK ==> [00016d6000 - 00016d62c0]
[    0.000000]   #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
[    0.000000]   #7 [0000014000 - 0000019000]          PGTABLE ==> [0000014000 - 0000019000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880001800000-ffff8800089fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00220000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000dfe70
[    0.000000]     0: 0x00100000 -> 0x00220000
[    0.000000] On node 0 totalpages: 2096638
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 109 pages reserved
[    0.000000]   DMA zone: 3817 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 898728 pages, LIFO batch:31
[    0.000000]   Normal zone: 16128 pages used for memmap
[    0.000000]   Normal zone: 1163520 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe88000
[    0.000000] PM: Registered nosave memory: 00000000dfe88000 - 00000000dfedc000
[    0.000000] PM: Registered nosave memory: 00000000dfedc000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008c00000 s90328 r8192 d24360 u131072
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2066065
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=711c647d-9599-4c2b-a7af-f8b60832a28b ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880008dfe000 - ffff88000cdfe000
[    0.000000] software IO TLB at phys 0x8dfe000 - 0xcdfe000
[    0.000000] Memory: 8185844k/8912896k available (3068k kernel code, 526344k absent, 200708k reserved, 2047k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:536
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2942.321 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5884.64 BogoMIPS (lpj=11769284)
[    0.000014] Security Framework initialized
[    0.000016] SELinux:  Disabled at boot.
[    0.000417] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[    0.001739] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002362] Mount-cache hash table entries: 256
[    0.002451] Initializing cgroup subsys ns
[    0.002453] Initializing cgroup subsys cpuacct
[    0.002457] Initializing cgroup subsys devices
[    0.002458] Initializing cgroup subsys freezer
[    0.002459] Initializing cgroup subsys net_cls
[    0.002472] CPU: Physical Processor ID: 0
[    0.002473] CPU: Processor Core ID: 0
[    0.002475] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.002477] CPU: L2 cache: 256K
[    0.002477] CPU: L3 cache: 8192K
[    0.002480] CPU 0/0x0 -> Node 0
[    0.002481] mce: CPU supports 9 MCE banks
[    0.002489] CPU0: Thermal monitoring enabled (TM1)
[    0.002491] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[    0.002497] using mwait in idle threads.
[    0.002498] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[    0.002502] ... version:                3
[    0.002502] ... bit width:              48
[    0.002503] ... generic registers:      4
[    0.002504] ... value mask:             0000ffffffffffff
[    0.002506] ... max period:             000000007fffffff
[    0.002507] ... fixed-purpose events:   3
[    0.002508] ... event mask:             000000070000000f
[    0.003124] ACPI: Core revision 20090903
[    0.116757] Setting APIC routing to physical flat
[    0.117078] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.156758] CPU0: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    0.264670] Booting processor 1 APIC 0x2 ip 0x6000
[    0.275127] Initializing CPU#1
[    0.352590] CPU: Physical Processor ID: 0
[    0.352590] CPU: Processor Core ID: 1
[    0.352592] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.352593] CPU: L2 cache: 256K
[    0.352594] CPU: L3 cache: 8192K
[    0.352596] CPU 1/0x2 -> Node 0
[    0.352604] CPU1: Thermal monitoring enabled (TM1)
[    0.352606] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.352689] CPU1: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    0.352695] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.372752] Booting processor 2 APIC 0x4 ip 0x6000
[    0.383002] Initializing CPU#2
[    0.460581] CPU: Physical Processor ID: 0
[    0.460581] CPU: Processor Core ID: 2
[    0.460583] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.460584] CPU: L2 cache: 256K
[    0.460585] CPU: L3 cache: 8192K
[    0.460587] CPU 2/0x4 -> Node 0
[    0.460595] CPU2: Thermal monitoring enabled (TM1)
[    0.460597] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.460672] CPU2: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    0.460677] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.480733] Booting processor 3 APIC 0x6 ip 0x6000
[    0.490983] Initializing CPU#3
[    0.568571] CPU: Physical Processor ID: 0
[    0.568572] CPU: Processor Core ID: 3
[    0.568574] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.568575] CPU: L2 cache: 256K
[    0.568576] CPU: L3 cache: 8192K
[    0.568578] CPU 3/0x6 -> Node 0
[    0.568586] CPU3: Thermal monitoring enabled (TM1)
[    0.568588] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.568653] CPU3: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    0.568659] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.588715] Booting processor 4 APIC 0x1 ip 0x6000
[    0.598965] Initializing CPU#4
[    0.676563] CPU: Physical Processor ID: 0
[    0.676564] CPU: Processor Core ID: 0
[    0.676566] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.676567] CPU: L2 cache: 256K
[    0.676568] CPU: L3 cache: 8192K
[    0.676570] CPU 4/0x1 -> Node 0
[    0.676579] CPU4: Thermal monitoring enabled (TM1)
[    0.676581] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    0.676645] CPU4: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    0.676652] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[    0.696714] Booting processor 5 APIC 0x3 ip 0x6000
[    0.706964] Initializing CPU#5
[    0.784553] CPU: Physical Processor ID: 0
[    0.784554] CPU: Processor Core ID: 1
[    0.784556] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.784557] CPU: L2 cache: 256K
[    0.784558] CPU: L3 cache: 8192K
[    0.784559] CPU 5/0x3 -> Node 0
[    0.784567] CPU5: Thermal monitoring enabled (TM1)
[    0.784569] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    0.784634] CPU5: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    0.784640] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[    0.804697] Booting processor 6 APIC 0x5 ip 0x6000
[    0.814947] Initializing CPU#6
[    0.892544] CPU: Physical Processor ID: 0
[    0.892545] CPU: Processor Core ID: 2
[    0.892547] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.892548] CPU: L2 cache: 256K
[    0.892549] CPU: L3 cache: 8192K
[    0.892550] CPU 6/0x5 -> Node 0
[    0.892558] CPU6: Thermal monitoring enabled (TM1)
[    0.892560] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    0.892617] CPU6: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    0.892622] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[    0.912683] Booting processor 7 APIC 0x7 ip 0x6000
[    0.922933] Initializing CPU#7
[    1.000535] CPU: Physical Processor ID: 0
[    1.000536] CPU: Processor Core ID: 3
[    1.000538] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.000539] CPU: L2 cache: 256K
[    1.000539] CPU: L3 cache: 8192K
[    1.000541] CPU 7/0x7 -> Node 0
[    1.000549] CPU7: Thermal monitoring enabled (TM1)
[    1.000551] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    1.000603] CPU7: Intel(R) Core(TM) i7 CPU         870  @ 2.93GHz stepping 05
[    1.000608] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[    1.020623] Brought up 8 CPUs
[    1.020624] Total of 8 processors activated (47076.87 BogoMIPS).
[    1.023829] CPU0 attaching sched-domain:
[    1.023832]  domain 0: span 0,4 level SIBLING
[    1.023833]   groups: group ffff880008c0fae0 cpus 0 (cpu_power = 589) group ffff880008c8fae0 cpus 4 (cpu_power = 589)
[    1.023838]   domain 1: span 0-7 level MC
[    1.023839]    groups: group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178)
[    1.023848] CPU1 attaching sched-domain:
[    1.023849]  domain 0: span 1,5 level SIBLING
[    1.023850]   groups: group ffff880008c2fae0 cpus 1 (cpu_power = 589) group ffff880008cafae0 cpus 5 (cpu_power = 589)
[    1.023854]   domain 1: span 0-7 level MC
[    1.023855]    groups: group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178)
[    1.023863] CPU2 attaching sched-domain:
[    1.023864]  domain 0: span 2,6 level SIBLING
[    1.023865]   groups: group ffff880008c4fae0 cpus 2 (cpu_power = 589) group ffff880008ccfae0 cpus 6 (cpu_power = 589)
[    1.023869]   domain 1: span 0-7 level MC
[    1.023871]    groups: group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178)
[    1.023878] CPU3 attaching sched-domain:
[    1.023879]  domain 0: span 3,7 level SIBLING
[    1.023880]   groups: group ffff880008c6fae0 cpus 3 (cpu_power = 589) group ffff880008cefae0 cpus 7 (cpu_power = 589)
[    1.023884]   domain 1: span 0-7 level MC
[    1.023886]    groups: group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178)
[    1.023893] CPU4 attaching sched-domain:
[    1.023894]  domain 0: span 0,4 level SIBLING
[    1.023895]   groups: group ffff880008c8fae0 cpus 4 (cpu_power = 589) group ffff880008c0fae0 cpus 0 (cpu_power = 589)
[    1.023899]   domain 1: span 0-7 level MC
[    1.023901]    groups: group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178)
[    1.023908] CPU5 attaching sched-domain:
[    1.023909]  domain 0: span 1,5 level SIBLING
[    1.023910]   groups: group ffff880008cafae0 cpus 5 (cpu_power = 589) group ffff880008c2fae0 cpus 1 (cpu_power = 589)
[    1.023914]   domain 1: span 0-7 level MC
[    1.023916]    groups: group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178)
[    1.023923] CPU6 attaching sched-domain:
[    1.023924]  domain 0: span 2,6 level SIBLING
[    1.023925]   groups: group ffff880008ccfae0 cpus 6 (cpu_power = 589) group ffff880008c4fae0 cpus 2 (cpu_power = 589)
[    1.023929]   domain 1: span 0-7 level MC
[    1.023931]    groups: group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178)
[    1.023938] CPU7 attaching sched-domain:
[    1.023939]  domain 0: span 3,7 level SIBLING
[    1.023940]   groups: group ffff880008cefae0 cpus 7 (cpu_power = 589) group ffff880008c6fae0 cpus 3 (cpu_power = 589)
[    1.023944]   domain 1: span 0-7 level MC
[    1.023946]    groups: group ffff880008c6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008c0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008c2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008c4fbf0 cpus 2,6 (cpu_power = 1178)
[    1.024250] devtmpfs: initialized
[    1.027361] regulator: core version 0.5
[    1.027398] NET: Registered protocol family 16
[    1.027454] ACPI: bus type pci registered
[    1.027502] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    1.027503] PCI: Not using MMCONFIG.
[    1.027504] PCI: Using configuration type 1 for base access
[    1.027902] bio: create slab <bio-0> at 0
[    1.028573] ACPI: EC: Look up EC in DSDT
[    1.029577] ACPI: Executed 1 blocks of module-level executable AML code
[    1.042297] ACPI: Interpreter enabled
[    1.042299] ACPI: (supports S0 S1 S3 S4 S5)
[    1.042316] ACPI: Using IOAPIC for interrupt routing
[    1.042354] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    1.044943] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[    1.046135] PCI: Using MMCONFIG at f8000000 - fbffffff
[    1.053598] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    1.053657] ACPI Warning: Incorrect checksum in table [OEMB] - 69, should be 68 (20090903/tbutils-314)
[    1.053771] ACPI: No dock devices found.
[    1.054020] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    1.054127] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    1.054129] pci 0000:00:03.0: PME# disabled
[    1.054372] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf5ffe000-0xf5ffe3ff]
[    1.054434] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.054437] pci 0000:00:1a.0: PME# disabled
[    1.054471] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf5ff8000-0xf5ffbfff]
[    1.054517] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.054520] pci 0000:00:1b.0: PME# disabled
[    1.054585] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.054588] pci 0000:00:1c.0: PME# disabled
[    1.054653] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.054656] pci 0000:00:1c.1: PME# disabled
[    1.054721] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.054724] pci 0000:00:1c.2: PME# disabled
[    1.054789] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.054792] pci 0000:00:1c.3: PME# disabled
[    1.054856] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    1.054859] pci 0000:00:1c.4: PME# disabled
[    1.054924] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.054926] pci 0000:00:1c.5: PME# disabled
[    1.054991] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    1.054994] pci 0000:00:1c.6: PME# disabled
[    1.055058] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    1.055061] pci 0000:00:1c.7: PME# disabled
[    1.055105] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf5ffd000-0xf5ffd3ff]
[    1.055167] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.055170] pci 0000:00:1d.0: PME# disabled
[    1.055342] pci 0000:00:1f.2: reg 10 io port: [0x9880-0x9887]
[    1.055346] pci 0000:00:1f.2: reg 14 io port: [0x9800-0x9803]
[    1.055351] pci 0000:00:1f.2: reg 18 io port: [0x9480-0x9487]
[    1.055355] pci 0000:00:1f.2: reg 1c io port: [0x9400-0x9403]
[    1.055360] pci 0000:00:1f.2: reg 20 io port: [0x9080-0x909f]
[    1.055364] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf5ff7000-0xf5ff77ff]
[    1.055401] pci 0000:00:1f.2: PME# supported from D3hot
[    1.055404] pci 0000:00:1f.2: PME# disabled
[    1.055427] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf5ffc000-0xf5ffc0ff]
[    1.055437] pci 0000:00:1f.3: reg 20 io port: [0xffe0-0xffff]
[    1.055477] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[    1.055484] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[    1.055490] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xf2000000-0xf3ffffff]
[    1.055495] pci 0000:01:00.0: reg 24 io port: [0xac00-0xac7f]
[    1.055499] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7a00000-0xf7a7ffff]
[    1.055556] pci 0000:01:00.1: reg 10 32bit mmio: [0xf7afc000-0xf7afffff]
[    1.060611] pci 0000:00:03.0: bridge io port: [0xa000-0xafff]
[    1.060616] pci 0000:00:03.0: bridge 32bit mmio: [0xf6000000-0xf7afffff]
[    1.060625] pci 0000:00:03.0: bridge 64bit mmio pref: [0xe0000000-0xf3ffffff]
[    1.060823] pci 0000:05:00.0: reg 10 64bit mmio: [0xf7efe000-0xf7efffff]
[    1.060925] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    1.060929] pci 0000:05:00.0: PME# disabled
[    1.068641] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
[    1.068685] pci 0000:04:00.0: reg 10 io port: [0xdc00-0xdc07]
[    1.068692] pci 0000:04:00.0: reg 14 io port: [0xd880-0xd883]
[    1.068699] pci 0000:04:00.0: reg 18 io port: [0xd800-0xd807]
[    1.068706] pci 0000:04:00.0: reg 1c io port: [0xd480-0xd483]
[    1.068712] pci 0000:04:00.0: reg 20 io port: [0xd400-0xd40f]
[    1.068719] pci 0000:04:00.0: reg 24 32bit mmio: [0xf7dff800-0xf7dfffff]
[    1.068726] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xf7de0000-0xf7deffff]
[    1.068777] pci 0000:04:00.0: PME# supported from D3hot
[    1.068781] pci 0000:04:00.0: PME# disabled
[    1.076627] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[    1.076630] pci 0000:00:1c.5: bridge 32bit mmio: [0xf7d00000-0xf7dfffff]
[    1.076715] pci 0000:03:00.0: reg 24 32bit mmio: [0xf7cfe000-0xf7cfffff]
[    1.076770] pci 0000:03:00.0: PME# supported from D3hot
[    1.076774] pci 0000:03:00.0: PME# disabled
[    1.076823] pci 0000:03:00.1: reg 10 io port: [0xcc00-0xcc07]
[    1.076831] pci 0000:03:00.1: reg 14 io port: [0xc880-0xc883]
[    1.076838] pci 0000:03:00.1: reg 18 io port: [0xc800-0xc807]
[    1.076846] pci 0000:03:00.1: reg 1c io port: [0xc480-0xc483]
[    1.076854] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
[    1.076930] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.076991] pci 0000:00:1c.6: bridge io port: [0xc000-0xcfff]
[    1.076994] pci 0000:00:1c.6: bridge 32bit mmio: [0xf7c00000-0xf7cfffff]
[    1.077038] pci 0000:02:00.0: reg 10 io port: [0xb800-0xb8ff]
[    1.077055] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xf4fff000-0xf4ffffff]
[    1.077068] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf4ff8000-0xf4ffbfff]
[    1.077075] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xf7bf0000-0xf7bfffff]
[    1.077134] pci 0000:02:00.0: supports D1 D2
[    1.077135] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.077139] pci 0000:02:00.0: PME# disabled
[    1.084634] pci 0000:00:1c.7: bridge io port: [0xb000-0xbfff]
[    1.084634] pci 0000:00:1c.7: bridge io port: [0xb000-0xbfff]
[    1.084638] pci 0000:00:1c.7: bridge 32bit mmio: [0xf7b00000-0xf7bfffff]
[    1.084642] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xf4f00000-0xf4ffffff]
[    1.084677] pci 0000:0a:04.0: reg 10 32bit mmio: [0xf7fff800-0xf7ffffff]
[    1.084682] pci 0000:0a:04.0: reg 14 io port: [0xec00-0xec7f]
[    1.084729] pci 0000:0a:04.0: supports D2
[    1.084730] pci 0000:0a:04.0: PME# supported from D2 D3hot D3cold
[    1.084733] pci 0000:0a:04.0: PME# disabled
[    1.084771] pci 0000:00:1e.0: transparent bridge
[    1.084774] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    1.084777] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
[    1.084815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.084976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[    1.085062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT]
[    1.085108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT]
[    1.085153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT]
[    1.085201] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    1.085246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[    1.085291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[    1.085336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[    1.085391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[    1.085444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    1.105875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    1.105971] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    1.106065] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    1.106160] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    1.106255] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    1.106350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    1.106445] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    1.106539] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    1.106611] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.106615] vgaarb: loaded
[    1.106652] PCI: Using ACPI for IRQ routing
[    1.106784]   alloc irq_desc for 24 on node -1
[    1.106785]   alloc kstat_irqs on node -1
[    1.106790]   alloc irq_desc for 25 on node -1
[    1.106791]   alloc kstat_irqs on node -1
[    1.106794]   alloc irq_desc for 26 on node -1
[    1.106795]   alloc kstat_irqs on node -1
[    1.106798]   alloc irq_desc for 27 on node -1
[    1.106799]   alloc kstat_irqs on node -1
[    1.106801]   alloc irq_desc for 28 on node -1
[    1.106802]   alloc kstat_irqs on node -1
[    1.106804] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    1.106810] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[    1.106814] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.112565] hpet: hpet2 irq 24 for MSI
[    1.112693] hpet: hpet3 irq 25 for MSI
[    1.116679] hpet: hpet4 irq 26 for MSI
[    1.120678] hpet: hpet5 irq 27 for MSI
[    1.124671] hpet: hpet6 irq 28 for MSI
[    1.136677] Switching to clocksource tsc
[    1.137497] pnp: PnP ACPI init
[    1.137503] ACPI: bus type pnp registered
[    1.139906] pnp: PnP ACPI: found 15 devices
[    1.139907] ACPI: ACPI bus type pnp unregistered
[    1.139913] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    1.139917] system 00:06: ioport range 0x290-0x29f has been reserved
[    1.139921] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    1.139923] system 00:07: ioport range 0x800-0x87f has been reserved
[    1.139925] system 00:07: ioport range 0x500-0x57f has been reserved
[    1.139926] system 00:07: ioport range 0x600-0x607 has been reserved
[    1.139928] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    1.139930] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[    1.139932] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[    1.139936] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
[    1.139940] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[    1.139941] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[    1.139945] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[    1.139948] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    1.139950] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[    1.139952] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[    1.139954] system 00:0e: iomem range 0x100000-0xdfffffff could not be reserved
[    1.139955] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[    1.144655] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[    1.144657] pci 0000:00:03.0:   IO window: 0xa000-0xafff
[    1.144660] pci 0000:00:03.0:   MEM window: 0xf6000000-0xf7afffff
[    1.144662] pci 0000:00:03.0:   PREFETCH window: 0x000000e0000000-0x000000f3ffffff
[    1.144666] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09
[    1.144668] pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
[    1.144672] pci 0000:00:1c.0:   MEM window: 0xf4000000-0xf41fffff
[    1.144675] pci 0000:00:1c.0:   PREFETCH window: 0x000000f4200000-0x000000f43fffff
[    1.144679] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:08
[    1.144681] pci 0000:00:1c.1:   IO window: 0x2000-0x2fff
[    1.144685] pci 0000:00:1c.1:   MEM window: 0xf4400000-0xf45fffff
[    1.144688] pci 0000:00:1c.1:   PREFETCH window: 0x000000f4600000-0x000000f47fffff
[    1.144692] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:07
[    1.144694] pci 0000:00:1c.2:   IO window: 0x3000-0x3fff
[    1.144698] pci 0000:00:1c.2:   MEM window: 0xf4800000-0xf49fffff
[    1.144701] pci 0000:00:1c.2:   PREFETCH window: 0x000000f4a00000-0x000000f4bfffff
[    1.144705] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[    1.144708] pci 0000:00:1c.3:   IO window: 0x4000-0x4fff
[    1.144711] pci 0000:00:1c.3:   MEM window: 0xf4c00000-0xf4dfffff
[    1.144714] pci 0000:00:1c.3:   PREFETCH window: 0x000000f5000000-0x000000f51fffff
[    1.144719] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
[    1.144720] pci 0000:00:1c.4:   IO window: disabled
[    1.144723] pci 0000:00:1c.4:   MEM window: 0xf7e00000-0xf7efffff
[    1.144726] pci 0000:00:1c.4:   PREFETCH window: disabled
[    1.144730] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[    1.144733] pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
[    1.144736] pci 0000:00:1c.5:   MEM window: 0xf7d00000-0xf7dfffff
[    1.144739] pci 0000:00:1c.5:   PREFETCH window: disabled
[    1.144743] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:03
[    1.144745] pci 0000:00:1c.6:   IO window: 0xc000-0xcfff
[    1.144749] pci 0000:00:1c.6:   MEM window: 0xf7c00000-0xf7cfffff
[    1.144752] pci 0000:00:1c.6:   PREFETCH window: disabled
[    1.144756] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:02
[    1.144758] pci 0000:00:1c.7:   IO window: 0xb000-0xbfff
[    1.144762] pci 0000:00:1c.7:   MEM window: 0xf7b00000-0xf7bfffff
[    1.144765] pci 0000:00:1c.7:   PREFETCH window: 0x000000f4f00000-0x000000f4ffffff
[    1.144776] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[    1.144778] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    1.144782] pci 0000:00:1e.0:   MEM window: 0xf7f00000-0xf7ffffff
[    1.144784] pci 0000:00:1e.0:   PREFETCH window: disabled
[    1.144793]   alloc irq_desc for 16 on node -1
[    1.144794]   alloc kstat_irqs on node -1
[    1.144798] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.144801] pci 0000:00:03.0: setting latency timer to 64
[    1.144806] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    1.144809]   alloc irq_desc for 17 on node -1
[    1.144810]   alloc kstat_irqs on node -1
[    1.144813] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.144815] pci 0000:00:1c.0: setting latency timer to 64
[    1.144821] pci 0000:00:1c.1: enabling device (0104 -> 0107)
[    1.144823] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.144826] pci 0000:00:1c.1: setting latency timer to 64
[    1.144831] pci 0000:00:1c.2: enabling device (0104 -> 0107)
[    1.144834]   alloc irq_desc for 18 on node -1
[    1.144835]   alloc kstat_irqs on node -1
[    1.144837] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.144840] pci 0000:00:1c.2: setting latency timer to 64
[    1.144846] pci 0000:00:1c.3: enabling device (0104 -> 0107)
[    1.144848]   alloc irq_desc for 19 on node -1
[    1.144849]   alloc kstat_irqs on node -1
[    1.144851] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.144854] pci 0000:00:1c.3: setting latency timer to 64
[    1.144860] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.144863] pci 0000:00:1c.4: setting latency timer to 64
[    1.144869] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.144871] pci 0000:00:1c.5: setting latency timer to 64
[    1.144877] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.144880] pci 0000:00:1c.6: setting latency timer to 64
[    1.144886] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.144889] pci 0000:00:1c.7: setting latency timer to 64
[    1.144893] pci 0000:00:1e.0: setting latency timer to 64
[    1.144896] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    1.144897] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    1.144899] pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
[    1.144901] pci_bus 0000:01: resource 1 mem: [0xf6000000-0xf7afffff]
[    1.144902] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf3ffffff]
[    1.144904] pci_bus 0000:09: resource 0 io:  [0x1000-0x1fff]
[    1.144905] pci_bus 0000:09: resource 1 mem: [0xf4000000-0xf41fffff]
[    1.144907] pci_bus 0000:09: resource 2 pref mem [0xf4200000-0xf43fffff]
[    1.144908] pci_bus 0000:08: resource 0 io:  [0x2000-0x2fff]
[    1.144910] pci_bus 0000:08: resource 1 mem: [0xf4400000-0xf45fffff]
[    1.144911] pci_bus 0000:08: resource 2 pref mem [0xf4600000-0xf47fffff]
[    1.144913] pci_bus 0000:07: resource 0 io:  [0x3000-0x3fff]
[    1.144914] pci_bus 0000:07: resource 1 mem: [0xf4800000-0xf49fffff]
[    1.144916] pci_bus 0000:07: resource 2 pref mem [0xf4a00000-0xf4bfffff]
[    1.144917] pci_bus 0000:06: resource 0 io:  [0x4000-0x4fff]
[    1.144919] pci_bus 0000:06: resource 1 mem: [0xf4c00000-0xf4dfffff]
[    1.144920] pci_bus 0000:06: resource 2 pref mem [0xf5000000-0xf51fffff]
[    1.144922] pci_bus 0000:05: resource 1 mem: [0xf7e00000-0xf7efffff]
[    1.144923] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    1.144925] pci_bus 0000:04: resource 1 mem: [0xf7d00000-0xf7dfffff]
[    1.144926] pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
[    1.144928] pci_bus 0000:03: resource 1 mem: [0xf7c00000-0xf7cfffff]
[    1.144929] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
[    1.144931] pci_bus 0000:02: resource 1 mem: [0xf7b00000-0xf7bfffff]
[    1.144932] pci_bus 0000:02: resource 2 pref mem [0xf4f00000-0xf4ffffff]
[    1.144934] pci_bus 0000:0a: resource 0 io:  [0xe000-0xefff]
[    1.144935] pci_bus 0000:0a: resource 1 mem: [0xf7f00000-0xf7ffffff]
[    1.144937] pci_bus 0000:0a: resource 3 io:  [0x00-0xffff]
[    1.144938] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[    1.144955] NET: Registered protocol family 2
[    1.145107] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.145799] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.147885] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.148139] TCP: Hash tables configured (established 524288 bind 65536)
[    1.148141] TCP reno registered
[    1.148231] NET: Registered protocol family 1
[    1.148255] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.148276] pci 0000:00:1a.0: PCI INT A disabled
[    1.148291]   alloc irq_desc for 23 on node -1
[    1.148292]   alloc kstat_irqs on node -1
[    1.148296] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.148315] pci 0000:00:1d.0: PCI INT A disabled
[    1.148329] pci 0000:01:00.0: Boot video device
[    1.148347] pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.148369] pci 0000:05:00.0: PCI INT A disabled
[    1.148399] Unpacking initramfs...
[    1.291044] Freeing initrd memory: 8653k freed
[    1.292542] audit: initializing netlink socket (disabled)
[    1.292549] type=2000 audit(1339410669.972:1): initialized
[    1.296030] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.296923] VFS: Disk quotas dquot_6.5.2
[    1.296956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.297007] msgmni has been set to 16004
[    1.297179] alg: No test for stdrng (krng)
[    1.297210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.297212] io scheduler noop registered
[    1.297213] io scheduler anticipatory registered
[    1.297214] io scheduler deadline registered
[    1.297248] io scheduler cfq registered (default)
[    1.297334]   alloc irq_desc for 29 on node -1
[    1.297335]   alloc kstat_irqs on node -1
[    1.297341] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
[    1.297346] pcieport 0000:00:03.0: setting latency timer to 64
[    1.297421]   alloc irq_desc for 30 on node -1
[    1.297422]   alloc kstat_irqs on node -1
[    1.297427] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
[    1.297433] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.297511]   alloc irq_desc for 31 on node -1
[    1.297513]   alloc kstat_irqs on node -1
[    1.297517] pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X
[    1.297523] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.297603]   alloc irq_desc for 32 on node -1
[    1.297604]   alloc kstat_irqs on node -1
[    1.297609] pcieport 0000:00:1c.2: irq 32 for MSI/MSI-X
[    1.297615] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.297694]   alloc irq_desc for 33 on node -1
[    1.297695]   alloc kstat_irqs on node -1
[    1.297700] pcieport 0000:00:1c.3: irq 33 for MSI/MSI-X
[    1.297706] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.297783]   alloc irq_desc for 34 on node -1
[    1.297784]   alloc kstat_irqs on node -1
[    1.297789] pcieport 0000:00:1c.4: irq 34 for MSI/MSI-X
[    1.297795] pcieport 0000:00:1c.4: setting latency timer to 64
[    1.297867]   alloc irq_desc for 35 on node -1
[    1.297868]   alloc kstat_irqs on node -1
[    1.297873] pcieport 0000:00:1c.5: irq 35 for MSI/MSI-X
[    1.297879] pcieport 0000:00:1c.5: setting latency timer to 64
[    1.297953]   alloc irq_desc for 36 on node -1
[    1.297954]   alloc kstat_irqs on node -1
[    1.297959] pcieport 0000:00:1c.6: irq 36 for MSI/MSI-X
[    1.297965] pcieport 0000:00:1c.6: setting latency timer to 64
[    1.298037]   alloc irq_desc for 37 on node -1
[    1.298039]   alloc kstat_irqs on node -1
[    1.298043] pcieport 0000:00:1c.7: irq 37 for MSI/MSI-X
[    1.298049] pcieport 0000:00:1c.7: setting latency timer to 64
[    1.298099] Firmware did not grant requested _OSC control
[    1.298101] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[    1.298919] Linux agpgart interface v0.103
[    1.298944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.299029] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.299260] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.299355] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.299390] PNP: No PS/2 controller found. Probing ports directly.
[    1.301902] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.301907] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.301954] mice: PS/2 mouse device common for all mice
[    1.301976] rtc_cmos 00:03: RTC can wake from S4
[    1.301994] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.302017] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.302024] cpuidle: using governor ladder
[    1.302025] cpuidle: using governor menu
[    1.302027] No iBFT detected.
[    1.302225] TCP cubic registered
[    1.302292] NET: Registered protocol family 10
[    1.302777] Mobile IPv6
[    1.302778] NET: Registered protocol family 17
[    1.302823] PM: Resume from disk failed.
[    1.302832] registered taskstats version 1
[    1.302832] registered taskstats version 1
[    1.303324] rtc_cmos 00:03: setting system clock to 2012-06-11 10:31:10 UTC (1339410670)
[    1.303352] Initalizing network drop monitor service
[    1.303371] Freeing unused kernel memory: 592k freed
[    1.303447] Write protecting the kernel read-only data: 4224k
[    1.312219] udev[116]: starting version 164
[    1.340635] usbcore: registered new interface driver usbfs
[    1.340656] usbcore: registered new interface driver hub
[    1.341334] usbcore: registered new device driver usb
[    1.348267] SCSI subsystem initialized
[    1.348854] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.348881] xhci_hcd 0000:05:00.0: setting latency timer to 64
[    1.348885] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.348898] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[    1.349042] xhci_hcd 0000:05:00.0: irq 16, io mem 0xf7efe000
[    1.352386] usb usb1: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[    1.352391] usb usb1: New USB device found, idVendor=1d6b, idProduct=0003
[    1.352393] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.352394] usb usb1: Product: xHCI Host Controller
[    1.352396] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[    1.352397] usb usb1: SerialNumber: 0000:05:00.0
[    1.352463] usb usb1: configuration #1 chosen from 1 choice
[    1.352465] xHCI xhci_add_endpoint called for root hub
[    1.352466] xHCI xhci_check_bandwidth called for root hub
[    1.352495] hub 1-0:1.0: USB hub found
[    1.352498] hub 1-0:1.0: 4 ports detected
[    1.357326] libata version 3.00 loaded.
[    1.358328] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.358333] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.358356] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.358408] scsi0 : pata_jmicron
[    1.358464] scsi1 : pata_jmicron
[    1.359012] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[    1.359015] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[    1.359381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.359393] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.359411] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.359413] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.359420] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    1.359445] ehci_hcd 0000:00:1a.0: debug port 2
[    1.363329] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    1.363334] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5ffe000
[    1.365749] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.367232] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.367264] r8169 0000:02:00.0: setting latency timer to 64
[    1.367302]   alloc irq_desc for 38 on node -1
[    1.367303]   alloc kstat_irqs on node -1
[    1.367313] r8169 0000:02:00.0: irq 38 for MSI/MSI-X
[    1.367667] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000579c000, 20:cf:30:42:a7:b5, XID 083000c0 IRQ 38
[    1.373528] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.373554] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.373558] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.373562] usb usb2: Product: EHCI Host Controller
[    1.373565] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    1.373568] usb usb2: SerialNumber: 0000:00:1a.0
[    1.373630] usb usb2: configuration #1 chosen from 1 choice
[    1.373646] hub 2-0:1.0: USB hub found
[    1.373650] hub 2-0:1.0: 2 ports detected
[    1.373679] ahci 0000:00:1f.2: version 3.0
[    1.373687]   alloc irq_desc for 21 on node -1
[    1.373688]   alloc kstat_irqs on node -1
[    1.373692] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[    1.373714]   alloc irq_desc for 39 on node -1
[    1.373715]   alloc kstat_irqs on node -1
[    1.373720] ahci 0000:00:1f.2: irq 39 for MSI/MSI-X
[    1.373740] ahci: SSS flag set, parallel bus scan disabled
[    1.389663] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.389670] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
[    1.389676] ahci 0000:00:1f.2: setting latency timer to 64
[    1.429686] scsi2 : ahci
[    1.429741] scsi3 : ahci
[    1.429777] scsi4 : ahci
[    1.429814] scsi5 : ahci
[    1.429850] scsi6 : ahci
[    1.429886] scsi7 : ahci
[    1.429990] ata3: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7100 irq 39
[    1.429993] ata4: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7180 irq 39
[    1.429995] ata5: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7200 irq 39
[    1.429997] ata6: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7280 irq 39
[    1.429999] ata7: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7300 irq 39
[    1.430001] ata8: SATA max UDMA/133 abar m2048@0xf5ff7000 port 0xf5ff7380 irq 39
[    1.430035] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.430041] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.430048] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.430051] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.430057] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.430089] ehci_hcd 0000:00:1d.0: debug port 2
[    1.433974] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    1.433984] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5ffd000
[    1.445163] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.445169] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.445176] ahci 0000:03:00.0: setting latency timer to 64
[    1.445274] scsi8 : ahci
[    1.445316] scsi9 : ahci
[    1.445369] ata9: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe100 irq 18
[    1.445372] ata10: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe180 irq 18
[    1.448765] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.448789] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.448793] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.448796] usb usb3: Product: EHCI Host Controller
[    1.448799] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[    1.448803] usb usb3: SerialNumber: 0000:00:1d.0
[    1.448858] usb usb3: configuration #1 chosen from 1 choice
[    1.448874] hub 3-0:1.0: USB hub found
[    1.448878] hub 3-0:1.0: 2 ports detected
[    1.684998] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.765626] ata9: SATA link down (SStatus 0 SControl 300)
[    1.765660] ata10: SATA link down (SStatus 0 SControl 300)
[    1.817036] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.817041] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.817116] usb 2-1: configuration #1 chosen from 1 choice
[    1.817177] hub 2-1:1.0: USB hub found
[    1.817279] hub 2-1:1.0: 6 ports detected
[    1.916742] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.932736] usb 3-1: new high speed USB device using ehci_hcd and address 2
[    1.959827] ata3.00: ATA-8: OCZ-VERTEX2 3.5, 1.25, max UDMA/133
[    1.959832] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.990024] ata3.00: configured for UDMA/133
[    2.004833] scsi 2:0:0:0: Direct-Access     ATA      OCZ-VERTEX2 3.5  1.25 PQ: 0 ANSI: 5
[    2.065034] usb 3-1: New USB device found, idVendor=8087, idProduct=0020
[    2.065039] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.065112] usb 3-1: configuration #1 chosen from 1 choice
[    2.065169] hub 3-1:1.0: USB hub found
[    2.065280] hub 3-1:1.0: 8 ports detected
[    2.892666] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.902415] ata4.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133
[    2.902417] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.904852] ata4.00: configured for UDMA/133
[    2.920757] scsi 3:0:0:0: Direct-Access     ATA      WDC WD15EARS-00M 51.0 PQ: 0 ANSI: 5
[    2.923521] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    2.923523] sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    2.923571] sd 2:0:0:0: [sda] Write Protect is off
[    2.923573] sd 3:0:0:0: [sdb] Write Protect is off
[    2.923575] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.923577] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.923595] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.923598] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.923755]  sda:
[    2.923773]  sdb: sda1 sda2 < sda5 >
[    2.924304] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.939067]  sdb1
[    2.939268] sd 3:0:0:0: [sdb] Attached SCSI disk
[    3.808606] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.810236] ata5.00: ATAPI: Optiarc DVD RW AD-7260S, 1.00, max UDMA/100
[    3.812164] ata5.00: configured for UDMA/100
[    3.829785] scsi 4:0:0:0: CD-ROM            Optiarc  DVD RW AD-7260S  1.00 PQ: 0 ANSI: 5
[    4.149444] ata6: SATA link down (SStatus 0 SControl 300)
[    4.484550] ata7: SATA link down (SStatus 0 SControl 300)
[    4.816530] ata8: SATA link down (SStatus 0 SControl 300)
[    4.838062] firewire_ohci 0000:0a:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    4.841691] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.841696] Uniform CD-ROM driver Revision: 3.20
[    4.841796] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    4.843968] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    4.844005] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    4.844034] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    4.917012] firewire_ohci: Added fw-ohci device 0000:0a:04.0, OHCI version 1.10
[    5.025657] PM: Starting manual resume from disk
[    5.025659] PM: Resume from partition 8:5
[    5.025660] PM: Checking hibernation image.
[    5.025795] PM: Error -22 checking image file
[    5.025798] PM: Resume from disk failed.
[    5.033672] kjournald starting.  Commit interval 5 seconds
[    5.033679] EXT3-fs: mounted filesystem with ordered data mode.
[    5.130420] udev[428]: starting version 164
[    5.158511] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    5.158517] ACPI: Power Button [PWRB]
[    5.158561] ACPI: SSDT 00000000dfe880c0 0265C (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    5.159125] ACPI: SSDT 00000000dfe8a720 00659 (v01  PmRef  P001Cst 00003001 INTL 20060113)
[    5.160278] Monitor-Mwait will be used to enter C-1 state
[    5.160320] Monitor-Mwait will be used to enter C-2 state
[    5.160411] processor LNXCPU:00: registered as cooling_device0
[    5.160477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    5.160481] ACPI: Power Button [PWRF]
[    5.161393] processor LNXCPU:01: registered as cooling_device1
[    5.166026] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.168721] processor LNXCPU:02: registered as cooling_device2
[    5.174993] processor LNXCPU:03: registered as cooling_device3
[    5.183922] processor LNXCPU:04: registered as cooling_device4
[    5.184695] processor LNXCPU:05: registered as cooling_device5
[    5.185009] processor LNXCPU:06: registered as cooling_device6
[    5.185601] processor LNXCPU:07: registered as cooling_device7
[    5.214248] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.239109] ATK0110 ATK0110:00: EC enabled
[    5.269634]   alloc irq_desc for 22 on node -1
[    5.269636]   alloc kstat_irqs on node -1
[    5.269642] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    5.269827] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.281532] [drm] Initialized drm 1.1.0 20060810
[    5.297790] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.297794] nouveau 0000:01:00.0: setting latency timer to 64
[    5.299757] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a3180a2)
[    5.300347] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    5.380968] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    5.380971] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    5.380973] [drm] nouveau 0000:01:00.0: Bios version 70.15.23.00
[    5.380975] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[    5.381022] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[    5.381023] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[    5.381025] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[    5.381027] [drm] nouveau 0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[    5.381029] [drm] nouveau 0000:01:00.0:   1: 0x00002161: type 0x61 idx 1 tag 0x08
[    5.381031] [drm] nouveau 0000:01:00.0:   2: 0x00000200: type 0x00 idx 2 tag 0xff
[    5.381033] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030
[    5.381035] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000
[    5.381036] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01032310 00000000
[    5.381038] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02021362 00020010
[    5.381045] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC72F
[    5.416982] firewire_core: created device fw0: GUID 001fc60000022189, S400
[    5.424524] [drm] nouveau 0000:01:00.0: 0xCA91: Condition still not met after 20ms, skipping following opcodes
[    5.448522] [drm] nouveau 0000:01:00.0: 0xCA95: Condition still not met after 20ms, skipping following opcodes
[    5.448546] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCCA6
[    5.480518] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDBF4
[    5.480528] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDC32
[    5.530159] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDE38
[    5.530160] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xDE9D
[    5.552515] [drm] nouveau 0000:01:00.0: 0xDE9D: Condition still not met after 20ms, skipping following opcodes
[    5.552524] [drm] nouveau 0000:01:00.0: 0xB64D: parsing output script 0
[    5.552527] [drm] nouveau 0000:01:00.0: 0xB64D: parsing output script 0
[    5.718311] [TTM] Zone  kernel: Available graphics memory: 4097546 kiB.
[    5.718315] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[    5.718330] [drm] nouveau 0000:01:00.0: 1024 MiB VRAM
[    5.786069] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    5.786074] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    5.788839] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[    5.788840] [drm] nouveau 0000:01:00.0: Detected a DAC output
[    5.788842] [drm] nouveau 0000:01:00.0: Detected a DAC output
[    5.788843] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[    5.788845] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[    5.788871] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[    5.788890] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[    5.922817] No connectors reported connected with modes
[    5.922821] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[    5.922890] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.922892] hda_intel: Disable MSI for Nvidia chipset
[    5.923059] HDA Intel 0000:01:00.1: setting latency timer to 64
[    6.847633] Adding 4789240k swap on /dev/sda5.  Priority:-1 extents:1 across:4789240k SS
[    6.868097] EXT3 FS on sda1, internal journal
[    6.879873] loop: module loaded
[    7.503966] kjournald starting.  Commit interval 5 seconds
[    7.504294] EXT3 FS on sdb1, internal journal
[    7.504301] EXT3-fs: mounted filesystem with ordered data mode.
[    7.830579] fuse init (API version 7.13)
[    7.962665] RPC: Registered udp transport module.
[    7.962668] RPC: Registered tcp transport module.
[    7.962669] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.001624] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    8.095402] svc: failed to register lockdv1 RPC service (errno 97).
[    8.096166] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    8.096492] NFSD: starting 90-second grace period
[    8.279649] Bluetooth: Core ver 2.15
[    8.279768] NET: Registered protocol family 31
[    8.279770] Bluetooth: HCI device and connection manager initialized
[    8.279772] Bluetooth: HCI socket layer initialized
[    8.285293] r8169 0000:02:00.0: firmware: requesting rtl_nic/rtl8168d-2.fw
[    8.303704] Bluetooth: L2CAP ver 2.14
[    8.303705] Bluetooth: L2CAP socket layer initialized
[    8.308076] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.308078] Bluetooth: BNEP filters: protocol multicast
[    8.366734] Bridge firewalling registered
[    8.390699] Bluetooth: RFCOMM TTY layer initialized
[    8.390702] Bluetooth: RFCOMM socket layer initialized
[    8.390704] Bluetooth: RFCOMM ver 1.11

Dernière modification par nervus70 (11-06-2012 14:51:12)

Hors ligne

#5 11-06-2012 17:39:48

zoroastre74
Membre
Distrib. : Debian Wheezy
Noyau : Linux 3.2
(G)UI : Awesome wm v3.4.13 (Octopus)
Inscription : 28-08-2010

Re : Partition principale en read-only après montage d'un second disque dur

Yep!

errors=remount-ro

Si erreurs, on monte le disque UUID=711c647d-9599-4c2b-a7af-f8b60832a28b en READONLY

Je regarderais attentivement le log ci dessus...

@+

Zoroastre.

Hors ligne

#6 11-06-2012 17:47:42

nervus70
Membre
Inscription : 12-03-2012

Re : Partition principale en read-only après montage d'un second disque dur

zoroastre74 a écrit :

Yep!

errors=remount-ro

Si erreurs, on monte le disque UUID=711c647d-9599-4c2b-a7af-f8b60832a28b en READONLY

Je regarderais attentivement le log ci dessus...

@+

Zoroastre.


Merci pour ta réponse, j'avais déjà compris ce points là mais ça ne m'explique pas pourquoi il y a une erreur, et surtout OU ! Je suis pas un pro de linux et je vois pas grand chose qui me choque dans les logs.

Comment investiguer ? Par quoi commencer ? Je suis un peu bloqué sad

Hors ligne

#7 11-06-2012 17:57:46

zoroastre74
Membre
Distrib. : Debian Wheezy
Noyau : Linux 3.2
(G)UI : Awesome wm v3.4.13 (Octopus)
Inscription : 28-08-2010

Re : Partition principale en read-only après montage d'un second disque dur

Yep!

Commence par nous retourner le resultat de la commande suivante en root :

mount


et

cat /etc/mtab


@+

Zoroastre.

Dernière modification par zoroastre74 (11-06-2012 18:00:32)

Hors ligne

#8 11-06-2012 18:30:43

nervus70
Membre
Inscription : 12-03-2012

Re : Partition principale en read-only après montage d'un second disque dur

zoroastre74 a écrit :

Yep!

Commence par nous retourner le resultat de la commande suivante en root :

mount


et

cat /etc/mtab


@+

Zoroastre.


Merci, j'ai finalement su résoudre mon probleme en me connectant physiquement à la machine, et en la démarrant en mode "sans échec" je reviens plus sur le terme. J'ai fait un fsck et ca a réglé le prob.

merci beaucoup

Dernière modification par nervus70 (11-06-2012 18:33:09)

Hors ligne

#9 11-06-2012 18:52:34

zoroastre74
Membre
Distrib. : Debian Wheezy
Noyau : Linux 3.2
(G)UI : Awesome wm v3.4.13 (Octopus)
Inscription : 28-08-2010

Re : Partition principale en read-only après montage d'un second disque dur

Yep!

Content que tu aies résolue ton problème wink

As-tu encore ce message qui apparait dans tes logs ???

EXT3-fs: mounted filesystem with ordered data mode.


@+

Zoroastre.

Hors ligne

#10 12-06-2012 09:41:53

nervus70
Membre
Inscription : 12-03-2012

Re : Partition principale en read-only après montage d'un second disque dur

J'aimerais bien mais le fichier /var/log/boot est vide maintenant :

(Nothing has been logged yet.)


Bizzare

Hors ligne

Pied de page des forums