Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 06-09-2013 15:11:37

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

device descriptor read/64, error -32 RESOLU

Bonjour à tous.

Voilà ce que je lis sur le log, à la mise en route de Debian:

12.192147] usb 2-3.1: device descriptor read/64, error -32



Il semblerait que ce soit dû à une magnifique intervention de ma part.....
En effet, j'ai voulu créer une clé de démarrage avec un autre Linux, pour voir.
Ben, voilà j'ai vu et je n'en suis pas plus fier.

Pour atteindre ce but, j'ai piqué dans un forum (sais plus lequel) une procédure complète dans laquelle figurait la ligne suivante:

dd if=/home/andre/Téléchargements/slitaz-4.0.iso of=/dev/sdc1


J'ai lu par la suite qu'il ne fallait pas jouer avec la Commande dd....

.....Et, je me retrouve une fois de plus dans la cagaïe! L'apprentissage continue...

Une petite piste? Merci d'avance.

Dernière modification par dudulle24 (20-10-2013 16:46:32)

Hors ligne

#2 06-09-2013 15:25:31

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian Stretch/Sid/Rc-Buggy
Noyau : Linux (≥ 4.3)
(G)UI : i3-wm (≥ 4.11)
Inscription : 07-07-2008
Site Web

Re : device descriptor read/64, error -32 RESOLU

Salut,
Si, il n'y a aucun problème à utiliser dd, du moment que l'on sait ce que l'on fait.
Si /dev/sdc est ta clé usb, alors ça n'est pas bien grave, il te suffit de refaire le truc sans le « 1 » de « sdc1 »'. Attention, tu perdras tout ce qu'il y a sur la clé.
Sinon, si sdc est un disque dur et que sdc1 était une partition, tu as perdu toutes les données qu'il y avait dessus.

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#3 06-09-2013 16:49:39

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Salut Captnfab
OK, j'ai refait le truc comme tu dis.
La commande  a fonctionné mais,......j'ai toujours ces messages d'erreur.
Apparemment, la cause est ailleurs. J'avais tout faux.

Hors ligne

#4 06-09-2013 16:51:34

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian Stretch/Sid/Rc-Buggy
Noyau : Linux (≥ 4.3)
(G)UI : i3-wm (≥ 4.11)
Inscription : 07-07-2008
Site Web

Re : device descriptor read/64, error -32 RESOLU

Le message d'erreur sonne d'avantage comme celui d'une clé usb HS.

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#5 06-09-2013 16:58:18

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Ouaip, c'était peut être cela au début; mais maintenant, j'ai une ribambelle d'erreurs comme celle décrite au début.
Je voudrais bien les lister mais, je ne sais pas faire!

Hors ligne

#6 06-09-2013 17:00:47

captnfab
Admin-Girafe
Lieu : /dev/random
Distrib. : Debian Stretch/Sid/Rc-Buggy
Noyau : Linux (≥ 4.3)
(G)UI : i3-wm (≥ 4.11)
Inscription : 07-07-2008
Site Web

Re : device descriptor read/64, error -32 RESOLU

Tu peux regarder la sortie de dmesg, c'est peut-être dedans ? smile

captnfab,
Association Debian-Facile, bépo.
TheDoctor: Your wish is my command… But be careful what you wish for.

Hors ligne

#7 06-09-2013 17:16:24

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Ca y est. J'ai listé mon log de démarrage. (Boot.log)
17 erreurs.

Pas de piste?

Dernière modification par dudulle24 (06-09-2013 18:16:34)

Hors ligne

#8 07-09-2013 11:52:15

MicP
Invité

Re : device descriptor read/64, error -32 RESOLU

Bonjour dudulle24.

Effectivement, comme captnfab te l'a fait remarquer, tu as dû confondre partition (/dev/sdc1) et périphérique (/dev/sdc).
Ce n'est pas grave en soit.

J'ai vu et eu ces derniers temps quelques clefs USB récalcitrantes dont je suis venu à bout en supprimant la totalité des informations écrites sur la clef avec la commande "dd"
Finalement, la clef devient vierge de toute information résiduelles qui pourrait "tromper" les programmes d'auto-mountages.

Il est évident que si tu te trompe sur la cible (par exemple /dev/sda au lieu de /dev/sdc), tu risque de supprimer toute information sur ton disque dur ou une autre clef usb...
Donc dans le doute, ne fait rien, d'autant plus que cette commande nécessitant les privilèges du compte "root", cela entraîne donc les responsabilités qui vont avec...
Si tu es sûr que ta clef usb corresponds au périphérique "/dev/sdc",
et si tu as bien vérifié ta ligne de commande alors seulement tu peux appuyer sur "entrée" pour lancer la ligne de commande suivante:

dd if=/dev/zero of=/dev/sdc bs=4M; sync


Cela va très certainement prendre beaucoup de temps, en fonction de la "taille" de la clef, avant que l'opération se termine et que le prompt ne revienne dans la console.
Alors, patience....

Une fois que le prompt est revenu, tu déconnecte physiquement la clef de ta machine, et tu la reconnecte.

Étant donné qu'aucune table des partition n'est inscrite sur cette clef, il est donc maintenant impossible que le système d'auto-mountage puisse y trouve une partition et tente de la  la "mounter".

Il te reste donc maintenant à y créer une table des partition, et ensuite une partition,si c'est ton but,

ou alors d'y copier l'image iso que tu voulais y copier avec la bonne commande cette fois: sans le "1"
(toujours vérifier la ligne de commande avant de taper sur la touche entrée)

dd if=/home/andre/Téléchargements/slitaz-4.0.iso of=/dev/sdc bs=4M; sync

Dernière modification par MicP (19-09-2013 23:30:16)

#9 07-09-2013 13:54:57

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Ok Micp.
Mais... avant de me relancer avec Misterr dd, je souhaiterais savoir ce qui a provoqué ces erreurs

11.560120] usb 2-3.1: device descriptor read/64, error -32
12.040124] usb 2-3.1: device descriptor read/64, error -32
12.232125] usb 2-3.1: device descriptor read/64, error -32
12.832069] usb 2-3.1: device not accepting address 7, error -32
13.328028] usb 2-3.1: device not accepting address 8, error -32
15.434513] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
25.944212] usb 2-3.1: device descriptor read/64, error -32
26.136225] usb 2-3.1: device descriptor read/64, error -32
26.416100] usb 2-3.1: device descriptor read/64, error -32
26.608573] usb 2-3.1: device descriptor read/64, error -32
27.208099] usb 2-3.1: device not accepting address 11, error -32
27.704155] usb 2-3.1: device not accepting address 12, error -32


Je pense, en fait, m' être mal exprimé dans ma formulation.

Suite au commentaire de captnfab, je me suis dépatouillé avec ma clé USB.
J'ai bien ma clé Linux.

Mais ce qui me chagrine, ce sont ces erreurs.
Comment sont elles arrivées là et, surtout, comment m'en débarrasser!
Ce sont ces "pistes" que je cherchais.
Et,....je me demande si ça ne sera pas coton?
Voilà.
@+

Hors ligne

#10 08-09-2013 16:51:43

MicP
Invité

Re : device descriptor read/64, error -32 RESOLU

dudulle24" a écrit :

... Je pense, en fait, m' être mal exprimé dans ma formulation ...


Non non, tu t'étais très bien exprimé, d'autant plus que j'aurais dû moi aussi me concentrer sur le titre du fil,
De plus, le problème de la clef semble réglé.
En fait, c'est plutôt moi qui me suis laissé distraire pas les quelques posts au sujet de la clef USB

Au sujet de "device descriptor read/64, error -32", j'ai trouvé quelques liens sur le web mais si le message est très ressemblant, le code d'erreur ne corresponds pas.
De plus, les fils semblaient avoir été résolu sans comprendre vraiment ce qui s'était réellement passé.
Parmi les diverses solutions proposées, une consistait à déconnecter complètement la machine de l'alimentation en débranchant le cordon secteur pendant quelques minutes. Je suppose que cela devait permettre au circuit de contrôle des tensions d'alimentation de se réinitialiser, comme le 5V est aussi utilisé pour le "Wake On USB".
Il reste que si je connais bien ces composants électroniques, je ne sais pas quelle est la partie logicielle qui renvoie ce message.
Il me faut donc faire des recherches pour essayer de trouver qui retourne ces messages.

"dudulle24 a écrit :

... 17 erreurs.  ...


Bien, mas un copié/collé de ces messages d'erreur pourrait peut-être nous aider.
Si tu pouvais nous transmettre une copie de ces messages.

Merci.

Dernière modification par MicP (08-09-2013 16:52:26)

#11 08-09-2013 17:36:31

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Je pense que c'est ça que tu me demandes?
Il y en a une sacrée longueur!
Tu me dis si ça ne te convient pas. C'est la copie de mon boot.log


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bde6b000 (usable)
[    0.000000]  BIOS-e820: 00000000bde6b000 - 00000000bdebf000 (reserved)
[    0.000000]  BIOS-e820: 00000000bdebf000 - 00000000bdf83000 (usable)
[    0.000000]  BIOS-e820: 00000000bdf83000 - 00000000bdfbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdfbf000 - 00000000bdfdf000 (usable)
[    0.000000]  BIOS-e820: 00000000bdfdf000 - 00000000bdff6000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdff6000 - 00000000bdffe000 (usable)
[    0.000000]  BIOS-e820: 00000000bdffe000 - 00000000bdfff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdfff000 - 00000000be000000 (usable)
[    0.000000]  BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/30F4, BIOS F.2C 08/24/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0FFF00000 mask FFFF00000 write-protect
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[    0.000000] RAMDISK: 37ac2000 - 37d59000
[    0.000000] Allocated new RAMDISK: 37767000 - 379fdee9
[    0.000000] Move RAMDISK from 0000000037ac2000 - 0000000037d58ee8 to 37767000 - 379fdee8
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 HP    )
[    0.000000] ACPI: XSDT bdffe120 00074 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP bdff3000 000F4 (v04 HP     VADER    00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT bdfe4000 0A5B2 (v01 HP     VADER    00000001 MSFT 01000013)
[    0.000000] ACPI: FACS bdf8c000 00040
[    0.000000] ACPI: DMAR bdff5000 00040 (v01               ? 00000001      00000000)
[    0.000000] ACPI: SSDT bdff4000 00655 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: HPET bdff2000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC bdff1000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG bdff0000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! bdfef000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC bdfe3000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240)
[    0.000000] ACPI: BOOT bdfe2000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT bdfe1000 00296 (v01 INTEL  SataAhci 00001000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4230MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[7] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000bde6b
[    0.000000]     0: 0x000bdebf -> 0x000bdf83
[    0.000000]     0: 0x000bdfbf -> 0x000bdfdf
[    0.000000]     0: 0x000bdff6 -> 0x000bdffe
[    0.000000]     0: 0x000bdfff -> 0x000be000
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1040102
[    0.000000] free_area_init_node: node 0, pgdat c1410740, node_mem_map f4f66200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 8461 pages used for memmap
[    0.000000]   HighMem zone: 803917 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f4f1c000 s33280 r0 d24064 u57344
[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029861
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=00635bbe-973e-419d-989a-48c518c5b86d ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[    0.000000] Memory: 4110472k/5242880k available (2851k kernel code, 49936k reserved, 1340k data, 416k init, 3249512k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc1419000 - 0xc1481000   ( 416 kB)
[    0.000000]       .data : 0xc12c8fc0 - 0xc1418100   (1340 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c8fc0   (2851 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f4806000 soft=f4808000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2127.790 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.58 BogoMIPS (lpj=8511160)
[    0.004007] pid_max: default: 32768 minimum: 301
[    0.004041] Security Framework initialized
[    0.004047] AppArmor: AppArmor disabled by boot time parameter
[    0.004062] Mount-cache hash table entries: 512
[    0.004184] Initializing cgroup subsys cpuacct
[    0.004191] Initializing cgroup subsys memory
[    0.004199] Initializing cgroup subsys devices
[    0.004201] Initializing cgroup subsys freezer
[    0.004203] Initializing cgroup subsys net_cls
[    0.004206] Initializing cgroup subsys blkio
[    0.004211] Initializing cgroup subsys perf_event
[    0.004241] CPU: Physical Processor ID: 0
[    0.004242] CPU: Processor Core ID: 0
[    0.004245] mce: CPU supports 6 MCE banks
[    0.004253] CPU0: Thermal monitoring enabled (TM1)
[    0.004257] using mwait in idle threads.
[    0.004684] ACPI: Core revision 20110623
[    0.012049] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.012467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052965] CPU0: Intel(R) Core(TM)2 Duo CPU     P7450  @ 2.13GHz stepping 06
[    0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.056003] ... version:                2
[    0.056003] ... bit width:              40
[    0.056003] ... generic registers:      2
[    0.056003] ... value mask:             000000ffffffffff
[    0.056003] ... max period:             000000007fffffff
[    0.056003] ... fixed-purpose events:   3
[    0.056003] ... event mask:             0000000700000003
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] CPU 1 irqstacks, hard=f48f2000 soft=f48f4000
[    0.056003] Booting Node   0, Processors  #1
[    0.056003] smpboot cpu 1: start_ip = 9a000
[    0.008000] Initializing CPU#1
[    0.144036] NMI watchdog enabled, takes one hw-pmu counter.
[    0.144067] Brought up 2 CPUs
[    0.144070] Total of 2 processors activated (8511.55 BogoMIPS).
[    0.146108] devtmpfs: initialized
[    0.146108] PM: Registering ACPI NVS region at bdf83000 (245760 bytes)
[    0.146108] print_constraints: dummy:
[    0.146108] NET: Registered protocol family 16
[    0.146108] ACPI: bus type pci registered
[    0.146108] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.146108] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.146108] PCI: Using MMCONFIG for extended config space
[    0.146108] PCI: Using configuration type 1 for base access
[    0.146108] bio: create slab <bio-0> at 0
[    0.146108] ACPI: Added _OSI(Module Device)
[    0.146108] ACPI: Added _OSI(Processor Device)
[    0.146108] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.146108] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149332] ACPI: EC: Look up EC in DSDT
[    0.150986] ACPI: Executed 1 blocks of module-level executable AML code
[    0.152222] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.157726] ACPI: SSDT bde6ec98 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.158115] ACPI: Dynamic OEM Table Load:
[    0.158118] ACPI: SSDT   (null) 00223 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.158266] ACPI: SSDT bde6c618 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.158637] ACPI: Dynamic OEM Table Load:
[    0.158640] ACPI: SSDT   (null) 005B3 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.180285] ACPI: SSDT bde6de18 001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.180691] ACPI: Dynamic OEM Table Load:
[    0.180694] ACPI: SSDT   (null) 001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.192117] ACPI: SSDT bde6ef18 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.192502] ACPI: Dynamic OEM Table Load:
[    0.192505] ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.212037] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.564079] ACPI: Interpreter enabled
[    0.564092] ACPI: (supports S0 S3 S4 S5)
[    0.564119] ACPI: Using IOAPIC for interrupt routing
[    0.820213] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.821022] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.876070] ACPI: Power Resource [FN00] (off)
[    0.892419] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.892606] ACPI: No dock devices found.
[    0.892608] HEST: Table not found.
[    0.892613] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.892919] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.893528] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.893532] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.893535] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.893539] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[    0.893553] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[    0.893599] pci 0000:00:01.0: [8086:2a41] type 1 class 0x000604
[    0.893643] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.893698] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.893773] pci 0000:00:1a.0: reg 20: [io  0x80e0-0x80ff]
[    0.893862] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.893939] pci 0000:00:1a.1: reg 20: [io  0x80c0-0x80df]
[    0.894038] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.894066] pci 0000:00:1a.7: reg 10: [mem 0xdf004c00-0xdf004fff]
[    0.894194] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.894230] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.894251] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
[    0.894349] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.894382] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.894476] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.894507] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[    0.894600] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.894632] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[    0.894726] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.894757] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[    0.894849] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.894881] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[    0.894974] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.895003] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[    0.895097] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.895134] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.895208] pci 0000:00:1d.0: reg 20: [io  0x80a0-0x80bf]
[    0.895291] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.895355] pci 0000:00:1d.1: reg 20: [io  0x8080-0x809f]
[    0.895443] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.895514] pci 0000:00:1d.2: reg 20: [io  0x8060-0x807f]
[    0.895601] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
[    0.895677] pci 0000:00:1d.3: reg 20: [io  0x8040-0x805f]
[    0.895774] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.895802] pci 0000:00:1d.7: reg 10: [mem 0xdf004800-0xdf004bff]
[    0.895931] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.895959] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.896040] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[    0.896194] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[    0.896219] pci 0000:00:1f.2: reg 10: [io  0x8108-0x810f]
[    0.896230] pci 0000:00:1f.2: reg 14: [io  0x8114-0x8117]
[    0.896240] pci 0000:00:1f.2: reg 18: [io  0x8100-0x8107]
[    0.896251] pci 0000:00:1f.2: reg 1c: [io  0x8110-0x8113]
[    0.896262] pci 0000:00:1f.2: reg 20: [io  0x8020-0x803f]
[    0.896272] pci 0000:00:1f.2: reg 24: [mem 0xdf004000-0xdf0047ff]
[    0.896342] pci 0000:00:1f.2: PME# supported from D3hot
[    0.896368] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.896389] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
[    0.896418] pci 0000:00:1f.3: reg 20: [io  0x8000-0x801f]
[    0.896575] pci 0000:01:00.0: [10de:0649] type 0 class 0x000300
[    0.896658] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[    0.896748] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.896838] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit]
[    0.896889] pci 0000:01:00.0: reg 24: [io  0x7000-0x707f]
[    0.896947] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    0.904093] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.904097] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    0.904100] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    0.904105] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.904222] pci 0000:02:00.0: [8086:4237] type 0 class 0x000280
[    0.904286] pci 0000:02:00.0: reg 10: [mem 0xde000000-0xde001fff 64bit]
[    0.904483] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.912097] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.912103] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    0.912107] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdeffffff]
[    0.912115] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.912168] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.912172] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.912177] pci 0000:00:1c.1:   bridge window [mem 0xdd000000-0xddffffff]
[    0.912184] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    0.912237] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.912242] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.912247] pci 0000:00:1c.2:   bridge window [mem 0xdc000000-0xdcffffff]
[    0.912255] pci 0000:00:1c.2:   bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
[    0.912384] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[    0.912444] pci 0000:05:00.0: reg 10: [io  0x3000-0x30ff]
[    0.912556] pci 0000:05:00.0: reg 18: [mem 0xd6010000-0xd6010fff 64bit pref]
[    0.912626] pci 0000:05:00.0: reg 20: [mem 0xd6000000-0xd600ffff 64bit pref]
[    0.912672] pci 0000:05:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.912915] pci 0000:05:00.0: supports D1 D2
[    0.912917] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.913089] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.913094] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.913099] pci 0000:00:1c.3:   bridge window [mem 0xdb000000-0xdbffffff]
[    0.913106] pci 0000:00:1c.3:   bridge window [mem 0xd6000000-0xd6ffffff 64bit pref]
[    0.913185] pci 0000:06:00.0: [197b:2380] type 0 class 0x000c00
[    0.913213] pci 0000:06:00.0: reg 10: [mem 0xda000000-0xda0007ff]
[    0.913233] pci 0000:06:00.0: reg 14: [mem 0xda000d00-0xda000d7f]
[    0.913289] pci 0000:06:00.0: reg 20: [mem 0xda000c80-0xda000cff]
[    0.913310] pci 0000:06:00.0: reg 24: [mem 0xda000c00-0xda000c7f]
[    0.913458] pci 0000:06:00.1: [197b:2382] type 0 class 0x000880
[    0.913482] pci 0000:06:00.1: reg 10: [mem 0xda000b00-0xda000bff]
[    0.913693] pci 0000:06:00.2: [197b:2381] type 0 class 0x000805
[    0.913716] pci 0000:06:00.2: reg 10: [mem 0xda000a00-0xda000aff]
[    0.913926] pci 0000:06:00.3: [197b:2383] type 0 class 0x000880
[    0.913950] pci 0000:06:00.3: reg 10: [mem 0xda000900-0xda0009ff]
[    0.914161] pci 0000:06:00.4: [197b:2384] type 0 class 0x000880
[    0.914185] pci 0000:06:00.4: reg 10: [mem 0xda000800-0xda0008ff]
[    0.920080] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    0.920085] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.920090] pci 0000:00:1c.4:   bridge window [mem 0xda000000-0xdaffffff]
[    0.920097] pci 0000:00:1c.4:   bridge window [mem 0xd7000000-0xd7ffffff 64bit pref]
[    0.920151] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.920156] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    0.920161] pci 0000:00:1c.5:   bridge window [mem 0xd9000000-0xd9ffffff]
[    0.920168] pci 0000:00:1c.5:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
[    0.920248] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[    0.920260] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.920263] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.920266] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.920269] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.920313] pci_bus 0000:00: on NUMA node 0
[    0.920316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.920578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.920666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.920733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.920793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.920853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[    0.920920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[    0.921007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[    0.921076]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.921079]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.921081] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.928035] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.928103] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[    0.928163] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.928221] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.928280] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.928337] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[    0.928394] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.928453] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.928548] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.928548] vgaarb: loaded
[    0.928548] vgaarb: bridge control possible 0000:01:00.0
[    0.928548] PCI: Using ACPI for IRQ routing
[    0.930113] PCI: pci_cache_line_size set to 64 bytes
[    0.930308] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[    0.930310] reserve RAM buffer: 00000000bde6b000 - 00000000bfffffff
[    0.930314] reserve RAM buffer: 00000000bdf83000 - 00000000bfffffff
[    0.930316] reserve RAM buffer: 00000000bdfdf000 - 00000000bfffffff
[    0.930319] reserve RAM buffer: 00000000bdffe000 - 00000000bfffffff
[    0.930321] reserve RAM buffer: 00000000be000000 - 00000000bfffffff
[    0.930430] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.930437] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.930442] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.936117] Switching to clocksource hpet
[    0.937855] pnp: PnP ACPI init
[    0.937868] ACPI: bus type pnp registered
[    1.064318] pnp 00:00: [bus 00-ff]
[    1.064321] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.064324] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.064328] pnp 00:00: [io  0x0d00-0xffff window]
[    1.064330] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.064333] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.064335] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.064338] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.064340] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.064343] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.064345] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.064348] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.064350] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.064353] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.064355] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.064358] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.064360] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.064363] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.064365] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[    1.064368] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.064424] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.064578] pnp 00:01: [io  0x002e-0x002f]
[    1.064581] pnp 00:01: [io  0x004e-0x004f]
[    1.064583] pnp 00:01: [io  0x164e-0x164f]
[    1.064585] pnp 00:01: [io  0x0061]
[    1.064587] pnp 00:01: [io  0x0068]
[    1.064589] pnp 00:01: [io  0x006c]
[    1.064591] pnp 00:01: [io  0x0070]
[    1.064593] pnp 00:01: [io  0x0080]
[    1.064595] pnp 00:01: [io  0x0092]
[    1.064597] pnp 00:01: [io  0x00b2-0x00b3]
[    1.064599] pnp 00:01: [io  0x0063]
[    1.064601] pnp 00:01: [io  0x0065]
[    1.064603] pnp 00:01: [io  0x0067]
[    1.064605] pnp 00:01: [io  0x0600-0x060f]
[    1.064607] pnp 00:01: [io  0x0610]
[    1.064610] pnp 00:01: [io  0x0800-0x080f]
[    1.064612] pnp 00:01: [io  0x0810-0x0817]
[    1.064614] pnp 00:01: [io  0x0820-0x0823]
[    1.064616] pnp 00:01: [io  0x0400-0x047f]
[    1.064618] pnp 00:01: [io  0x0500-0x053f]
[    1.064620] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    1.064623] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    1.064625] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[    1.064627] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    1.064629] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    1.064632] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    1.064634] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[    1.064636] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    1.064667] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io  0x1000-0x1fff]
[    1.064744] system 00:01: [io  0x0600-0x060f] has been reserved
[    1.064747] system 00:01: [io  0x0610] has been reserved
[    1.064750] system 00:01: [io  0x0800-0x080f] has been reserved
[    1.064753] system 00:01: [io  0x0810-0x0817] has been reserved
[    1.064756] system 00:01: [io  0x0820-0x0823] has been reserved
[    1.064759] system 00:01: [io  0x0400-0x047f] has been reserved
[    1.064762] system 00:01: [io  0x0500-0x053f] has been reserved
[    1.064766] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.064769] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.064772] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.064775] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.064778] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.064782] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.064785] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    1.064788] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.064792] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.064804] pnp 00:02: [io  0x0000-0x001f]
[    1.064806] pnp 00:02: [io  0x0081-0x0091]
[    1.064809] pnp 00:02: [io  0x0093-0x009f]
[    1.064811] pnp 00:02: [io  0x00c0-0x00df]
[    1.064813] pnp 00:02: [dma 4]
[    1.064846] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.064870] pnp 00:03: [io  0x0070-0x0077]
[    1.064906] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.064971] pnp 00:04: [irq 0 disabled]
[    1.064980] pnp 00:04: [irq 8]
[    1.064982] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    1.065017] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.065029] pnp 00:05: [io  0x00f0]
[    1.065034] pnp 00:05: [irq 13]
[    1.065068] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.065080] pnp 00:06: [mem 0xff800000-0xffffffff]
[    1.065116] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    1.065133] pnp 00:07: [io  0x0060]
[    1.065135] pnp 00:07: [io  0x0064]
[    1.065140] pnp 00:07: [irq 1]
[    1.065175] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.065194] pnp 00:08: [irq 12]
[    1.065233] pnp 00:08: Plug and Play ACPI device, IDs SYN0156 SYN0100 SYN0002 PNP0f13 (active)
[    1.065320] pnp 00:09: [irq 23]
[    1.065366] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[    1.065391] pnp 00:0a: [io  0xfd60-0xfd63]
[    1.065396] pnp 00:0a: [irq 4]
[    1.065450] pnp 00:0a: Plug and Play ACPI device, IDs ENE0100 (active)
[    1.065524] pnp: PnP ACPI: found 11 devices
[    1.065526] ACPI: ACPI bus type pnp unregistered
[    1.065530] PnPBIOS: Disabled by ACPI PNP
[    1.102617] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    1.102622] pci 0000:05:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    1.102628] PCI: max bus depth: 1 pci_try_num: 2
[    1.102692] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    1.102695] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.102698] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
[    1.102702] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    1.102706] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.102711] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.102715] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
[    1.102721] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdeffffff]
[    1.102726] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    1.102733] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.102736] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    1.102742] pci 0000:00:1c.1:   bridge window [mem 0xdd000000-0xddffffff]
[    1.102747] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[    1.102755] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.102758] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    1.102764] pci 0000:00:1c.2:   bridge window [mem 0xdc000000-0xdcffffff]
[    1.102769] pci 0000:00:1c.2:   bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
[    1.102778] pci 0000:05:00.0: BAR 6: assigned [mem 0xd6020000-0xd602ffff pref]
[    1.102781] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    1.102785] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    1.102791] pci 0000:00:1c.3:   bridge window [mem 0xdb000000-0xdbffffff]
[    1.102796] pci 0000:00:1c.3:   bridge window [mem 0xd6000000-0xd6ffffff 64bit pref]
[    1.102803] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[    1.102807] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    1.102813] pci 0000:00:1c.4:   bridge window [mem 0xda000000-0xdaffffff]
[    1.102818] pci 0000:00:1c.4:   bridge window [mem 0xd7000000-0xd7ffffff 64bit pref]
[    1.102825] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    1.102829] pci 0000:00:1c.5:   bridge window [io  0x1000-0x1fff]
[    1.102835] pci 0000:00:1c.5:   bridge window [mem 0xd9000000-0xd9ffffff]
[    1.102840] pci 0000:00:1c.5:   bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
[    1.102848] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[    1.102870] pci 0000:00:01.0: setting latency timer to 64
[    1.102879] pci 0000:00:1c.0: setting latency timer to 64
[    1.102891] pci 0000:00:1c.1: setting latency timer to 64
[    1.102902] pci 0000:00:1c.2: setting latency timer to 64
[    1.102914] pci 0000:00:1c.3: setting latency timer to 64
[    1.102923] pci 0000:00:1c.4: setting latency timer to 64
[    1.102932] pci 0000:00:1c.5: setting latency timer to 64
[    1.102939] pci 0000:00:1e.0: setting latency timer to 64
[    1.102943] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.102946] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.102948] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.102951] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[    1.102954] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
[    1.102956] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    1.102959] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.102962] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
[    1.102964] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdeffffff]
[    1.102967] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    1.102970] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    1.102973] pci_bus 0000:03: resource 1 [mem 0xdd000000-0xddffffff]
[    1.102975] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
[    1.102978] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    1.102981] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdcffffff]
[    1.102983] pci_bus 0000:04: resource 2 [mem 0xd5000000-0xd5ffffff 64bit pref]
[    1.102986] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    1.102989] pci_bus 0000:05: resource 1 [mem 0xdb000000-0xdbffffff]
[    1.102991] pci_bus 0000:05: resource 2 [mem 0xd6000000-0xd6ffffff 64bit pref]
[    1.102994] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    1.102997] pci_bus 0000:06: resource 1 [mem 0xda000000-0xdaffffff]
[    1.103000] pci_bus 0000:06: resource 2 [mem 0xd7000000-0xd7ffffff 64bit pref]
[    1.103003] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
[    1.103005] pci_bus 0000:07: resource 1 [mem 0xd9000000-0xd9ffffff]
[    1.103008] pci_bus 0000:07: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
[    1.103011] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    1.103013] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    1.103016] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    1.103018] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    1.103070] NET: Registered protocol family 2
[    1.103132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.103349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.103691] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.103864] TCP: Hash tables configured (established 131072 bind 65536)
[    1.103866] TCP reno registered
[    1.103869] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.103877] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.103953] NET: Registered protocol family 1
[    2.704014] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.304016] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.304206] pci 0000:01:00.0: Boot video device
[    4.304264] PCI: CLS 64 bytes, default 64
[    4.304310] Unpacking initramfs...
[    4.374386] Freeing initrd memory: 2652k freed
[    4.375246] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    4.375249] Simple Boot Flag at 0x44 set to 0x1
[    4.375673] audit: initializing netlink socket (disabled)
[    4.375687] type=2000 audit(1378486337.368:1): initialized
[    4.393264] highmem bounce pool size: 64 pages
[    4.393269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.394086] VFS: Disk quotas dquot_6.5.2
[    4.394123] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.394195] msgmni has been set to 1686
[    4.394355] alg: No test for stdrng (krng)
[    4.394383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.394387] io scheduler noop registered
[    4.394389] io scheduler deadline registered
[    4.394403] io scheduler cfq registered (default)
[    4.394503] pcieport 0000:00:01.0: setting latency timer to 64
[    4.394537] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    4.394589] pcieport 0000:00:1c.0: setting latency timer to 64
[    4.394642] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    4.394722] pcieport 0000:00:1c.1: setting latency timer to 64
[    4.394775] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    4.394853] pcieport 0000:00:1c.2: setting latency timer to 64
[    4.394907] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    4.394985] pcieport 0000:00:1c.3: setting latency timer to 64
[    4.395037] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    4.395117] pcieport 0000:00:1c.4: setting latency timer to 64
[    4.395170] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    4.395248] pcieport 0000:00:1c.5: setting latency timer to 64
[    4.395301] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    4.395409] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.395432] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.395434] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    4.395912] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[    4.395914] vesafb: scrolling: redraw
[    4.395917] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.396840] vesafb: framebuffer at 0xd1000000, mapped to 0xf8280000, using 4032k, total 4032k
[    4.443863] Console: switching to colour frame buffer device 160x50
[    4.490799] fb0: VESA VGA frame buffer device
[    4.490829] intel_idle: does not run on family 6 model 23
[    4.490865] ERST: Table is not found!
[    4.490866] GHES: HEST is not enabled!
[    4.490880] isapnp: Scanning for PnP cards...
[    4.802157] isapnp: No Plug & Play device found
[    4.802224] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.808358] Linux agpgart interface v0.103
[    4.808726] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    4.849350] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.849357] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.849497] mousedev: PS/2 mouse device common for all mice
[    4.851582] rtc_cmos 00:03: RTC can wake from S4
[    4.851703] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.851734] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    4.851745] cpuidle: using governor ladder
[    4.851747] cpuidle: using governor menu
[    4.851942] TCP cubic registered
[    4.851982] NET: Registered protocol family 10
[    4.852486] Mobile IPv6
[    4.852488] NET: Registered protocol family 17
[    4.852493] Registering the dns_resolver key type
[    4.852508] Using IPI No-Shortcut mode
[    4.852638] PM: Hibernation image not present or could not be loaded.
[    4.852646] registered taskstats version 1
[    4.853689] rtc_cmos 00:03: setting system clock to 2013-09-06 16:52:18 UTC (1378486338)
[    4.853755] Initializing network drop monitor service
[    4.853841] Freeing unused kernel memory: 416k freed
[    4.854014] Write protecting the kernel text: 2852k
[    4.854049] Write protecting the kernel read-only data: 1084k
[    4.854051] NX-protecting the kernel data: 3292k
[    4.865195] udevd[49]: starting version 175
[    4.886855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.935638] SCSI subsystem initialized
[    4.947447] libata version 3.00 loaded.
[    4.949590] ahci 0000:00:1f.2: version 3.0
[    4.949672] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    4.949732] ahci: SSS flag set, parallel bus scan disabled
[    4.949775] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    4.949779] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[    4.949785] ahci 0000:00:1f.2: setting latency timer to 64
[    4.972770] scsi0 : ahci
[    4.977120] scsi1 : ahci
[    4.977213] scsi2 : ahci
[    4.977286] scsi3 : ahci
[    4.977356] scsi4 : ahci
[    4.977426] scsi5 : ahci
[    4.977707] ata1: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004100 irq 47
[    4.977711] ata2: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004180 irq 47
[    4.977713] ata3: DUMMY
[    4.977715] ata4: DUMMY
[    4.977718] ata5: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004300 irq 47
[    4.977722] ata6: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004380 irq 47
[    4.988043] thermal LNXTHERM:00: registered as thermal_zone0
[    4.988046] ACPI: Thermal Zone [THRM] (52 C)
[    5.004066] ACPI: Fan [FAN] (off)
[    5.372021] Refined TSC clocksource calibration: 2127.999 MHz.
[    5.372025] Switching to clocksource tsc
[    5.468016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.469050] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    5.469255] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    5.469453] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[    5.469457] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    5.470636] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    5.470840] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    5.471702] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40F, max UDMA/100
[    5.471705] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    5.472891] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    5.473095] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    5.473099] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    5.473308] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    5.473510] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    5.473708] ata1.00: configured for UDMA/100
[    5.473829] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
[    5.792017] ata2: SATA link down (SStatus 4 SControl 300)
[    6.284015] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    6.286471] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    6.286615] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.286758] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.286762] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    6.286903] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.287047] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.287052] ata5.00: ATAPI: Optiarc BD ROM BC-5500S, 1.83, max UDMA/100
[    6.289600] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    6.289746] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.289889] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.289893] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    6.290034] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.290181] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    6.290186] ata5.00: configured for UDMA/100
[    6.291220] scsi 4:0:0:0: CD-ROM            Optiarc  BD ROM BC-5500S  1.83 PQ: 0 ANSI: 5
[    6.608017] ata6: SATA link down (SStatus 0 SControl 300)
[    6.612954] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    6.613005] sd 0:0:0:0: [sda] Write Protect is off
[    6.613008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.613030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.673821]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    6.674211] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.517427] PM: Starting manual resume from disk
[    7.517430] PM: Hibernation image partition 8:6 present
[    7.517432] PM: Looking for hibernation image.
[    7.517603] PM: Image not found (code -22)
[    7.517605] PM: Hibernation image not present or could not be loaded.
[    7.546342] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.299243] udevd[365]: starting version 175
[   10.084889] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   10.084895] ACPI: Power Button [PWRB]
[   10.084946] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   10.084952] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[   10.086525] ACPI: Lid Switch [LID0]
[   10.086548] ACPI: Requesting acpi_cpufreq
[   10.086584] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[   10.086589] ACPI: Sleep Button [SLPB]
[   10.086757] Monitor-Mwait will be used to enter C-1 state
[   10.086764] Monitor-Mwait will be used to enter C-2 state
[   10.086769] Monitor-Mwait will be used to enter C-3 state
[   10.086774] Marking TSC unstable due to TSC halts in idle
[   10.086786] ACPI: acpi_idle registered with cpuidle
[   10.086961] Switching to clocksource hpet
[   10.087439] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   10.087444] ACPI: Power Button [PWRF]
[   10.124149] acpi device:06: registered as cooling_device3
[   10.124240] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5
[   10.124246] ACPI: Video Device [EVGA] (multi-head: yes  rom: no  post: no)
[   10.220902] iTCO_vendor_support: vendor-support=0
[   10.261461] wmi: Mapper loaded
[   10.303179] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   10.364226] usbcore: registered new interface driver usbfs
[   10.364255] usbcore: registered new interface driver hub
[   10.364389] usbcore: registered new device driver usb
[   10.402387] ACPI: resource 0000:00:1f.3 [io  0x8000-0x801f] conflicts with ACPI region SMBI [io 0x8000-0x800f]
[   10.402390] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.510416] sdhci: Secure Digital Host Controller Interface driver
[   10.510418] sdhci: Copyright(c) Pierre Ossman
[   10.516665] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   10.516763] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   10.516992] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.572510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   10.572557] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   10.572562] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   10.572586] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   10.572615] ehci_hcd 0000:00:1a.7: debug port 1
[   10.573806] firewire_ohci 0000:06:00.0: setting latency timer to 64
[   10.576501] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[   10.576522] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdf004c00
[   10.588097] ACPI: AC Adapter [AC] (on-line)
[   10.592113] uhci_hcd: USB Universal Host Controller Interface driver
[   10.592677] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   10.592700] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.592703] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.592706] usb usb1: Product: EHCI Host Controller
[   10.592708] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[   10.592710] usb usb1: SerialNumber: 0000:00:1a.7
[   10.592840] hub 1-0:1.0: USB hub found
[   10.592845] hub 1-0:1.0: 4 ports detected
[   10.592949] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   10.592953] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   10.592962] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   10.592989] ehci_hcd 0000:00:1d.7: debug port 1
[   10.596885] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[   10.596921] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf004800
[   10.601630] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[   10.601632] ene_ir: PLL freq = 1406
[   10.601634] ene_ir: KB3926C detected
[   10.601647] ene_ir: Firmware regs: c1 00
[   10.601649] ene_ir: Hardware features:
[   10.601650] ene_ir: * Uses GPIO 40 for IR demodulated input
[   10.612033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   10.612086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   10.612090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.612094] usb usb2: Product: EHCI Host Controller
[   10.612097] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[   10.612100] usb usb2: SerialNumber: 0000:00:1d.7
[   10.612233] hub 2-0:1.0: USB hub found
[   10.612238] hub 2-0:1.0: 8 ports detected
[   10.612352] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   10.612358] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   10.612368] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   10.612408] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[   10.612442] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   10.612445] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.612447] usb usb3: Product: UHCI Host Controller
[   10.612449] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[   10.612452] usb usb3: SerialNumber: 0000:00:1a.0
[   10.612559] hub 3-0:1.0: USB hub found
[   10.612564] hub 3-0:1.0: 2 ports detected
[   10.612644] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   10.612648] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   10.612656] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   10.612692] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000080c0
[   10.612723] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   10.612726] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.612729] usb usb4: Product: UHCI Host Controller
[   10.612731] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[   10.612733] usb usb4: SerialNumber: 0000:00:1a.1
[   10.612852] hub 4-0:1.0: USB hub found
[   10.612856] hub 4-0:1.0: 2 ports detected
[   10.612938] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   10.612942] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   10.612950] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[   10.612977] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[   10.613008] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[   10.613011] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.613013] usb usb5: Product: UHCI Host Controller
[   10.613015] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[   10.613018] usb usb5: SerialNumber: 0000:00:1d.0
[   10.613131] hub 5-0:1.0: USB hub found
[   10.613136] hub 5-0:1.0: 2 ports detected
[   10.613215] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   10.613218] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   10.613226] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[   10.613261] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00008080
[   10.613293] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[   10.613296] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.613298] usb usb6: Product: UHCI Host Controller
[   10.613301] usb usb6: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[   10.613303] usb usb6: SerialNumber: 0000:00:1d.1
[   10.613417] hub 6-0:1.0: USB hub found
[   10.613422] hub 6-0:1.0: 2 ports detected
[   10.613518] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   10.613522] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   10.613531] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[   10.613558] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008060
[   10.613577] IR NEC protocol handler initialized
[   10.613599] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[   10.613602] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.613605] usb usb7: Product: UHCI Host Controller
[   10.613607] usb usb7: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[   10.613609] usb usb7: SerialNumber: 0000:00:1d.2
[   10.613823] hub 7-0:1.0: USB hub found
[   10.613827] hub 7-0:1.0: 2 ports detected
[   10.613919] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[   10.613923] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   10.613931] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[   10.613969] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008040
[   10.614002] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[   10.614005] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.614007] usb usb8: Product: UHCI Host Controller
[   10.614009] usb usb8: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[   10.614011] usb usb8: SerialNumber: 0000:00:1d.3
[   10.614114] hub 8-0:1.0: USB hub found
[   10.614119] hub 8-0:1.0: 2 ports detected
[   10.621004] hp_accel: hardware type DV7 found
[   10.621605] lis3lv02d: 8 bits sensor found
[   10.636106] firewire_ohci: Added fw-ohci device 0000:06:00.0, OHCI v1.10, 4 IR + 0 IT contexts, quirks 0x10
[   10.639411] jmb38x_ms 0000:06:00.3: setting latency timer to 64
[   10.639646] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[   10.639700] sdhci-pci 0000:06:00.1: setting latency timer to 64
[   10.639709] mmc0: no vmmc regulator found
[   10.639740] Registered led device: mmc0::
[   10.640777] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[   10.640790] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[   10.640811] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[   10.660623] IR RC5(x) protocol handler initialized
[   10.660669] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[   10.660806] Registered led device: hp::hddprotect
[   10.660821] hp_accel: driver loaded
[   10.676030] Registered IR keymap rc-rc6-mce
[   10.676114] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[   10.676201] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[   10.676219] ene_ir: driver has been successfully loaded
[   10.713254] input: HP WMI hotkeys as /devices/virtual/input/input9
[   10.722113] cfg80211: Calling CRDA to update world regulatory domain
[   10.932050] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[   10.958196] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.958288] r8169 0000:05:00.0: setting latency timer to 64
[   10.958468] r8169 0000:05:00.0: irq 48 for MSI/MSI-X
[   10.958970] r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xf86e2000, 00:23:5a:29:de:3e, XID 1c4000c0 IRQ 48
[   10.958974] r8169 0000:05:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[   11.065878] usb 2-3: New USB device found, idVendor=0409, idProduct=005a
[   11.065882] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.066165] hub 2-3:1.0: USB hub found
[   11.066238] hub 2-3:1.0: 4 ports detected
[   11.136162] firewire_core: created device fw0: GUID 923f0200e82b40d9, S400
[   11.176041] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[   11.327249] usb 2-5: New USB device found, idVendor=064e, idProduct=c107
[   11.327253] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[   11.327255] usb 2-5: Product: HP Webcam
[   11.327257] usb 2-5: Manufacturer: SuYin
[   11.327260] usb 2-5: SerialNumber: CN0314-MM00-MI06-VH-R53.90.01
[   11.448210] ACPI: Battery Slot [BAT0] (battery present)
[   11.472127] usb 2-3.1: new low-speed USB device number 5 using ehci_hcd
[   11.477993] IR RC6 protocol handler initialized
[   11.497757] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[   11.497760] cdrom: Uniform CD-ROM driver Revision: 3.20
[   11.497937] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   11.560120] usb 2-3.1: device descriptor read/64, error -32
[   11.615192] IR JVC protocol handler initialized
[   11.630540] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.630588] sr 4:0:0:0: Attached scsi generic sg1 type 5
[   11.753503] usb 2-3.1: device descriptor read/64, error -32
[   11.844762] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000
[   11.944060] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   11.944069] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   11.944119] usb 2-3.1: new low-speed USB device number 6 using ehci_hcd
[   11.944171] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   11.944203] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   11.947344] IR Sony protocol handler initialized
[   11.973002] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   12.040124] usb 2-3.1: device descriptor read/64, error -32
[   12.163544] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   12.163547] Copyright(c) 2003-2011 Intel Corporation
[   12.163683] iwlwifi 0000:02:00.0: setting latency timer to 64
[   12.163728] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[   12.163730] iwlwifi 0000:02:00.0: pci_resource_base = f88b8000
[   12.163733] iwlwifi 0000:02:00.0: HW Revision ID = 0x0
[   12.163885] iwlwifi 0000:02:00.0: irq 50 for MSI/MSI-X
[   12.163962] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[   12.164101] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   12.185729] iwlwifi 0000:02:00.0: device EEPROM VER=0x11f, CALIB=0x4
[   12.185732] iwlwifi 0000:02:00.0: Device SKU: 0Xf0
[   12.185759] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   12.202479] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input11
[   12.202566] IR MCE Keyboard/mouse protocol handler initialized
[   12.217247] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[   12.232125] usb 2-3.1: device descriptor read/64, error -32
[   12.255232] nvidia: module license 'NVIDIA' taints kernel.
[   12.255235] Disabling lock debugging due to kernel taint
[   12.424117] usb 2-3.1: new low-speed USB device number 7 using ehci_hcd
[   12.566312] Linux media interface: v0.10
[   12.568689] lirc_dev: IR Remote Control driver registered, major 250
[   12.587274] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[   12.587277] IR LIRC bridge handler initialized
[   12.589117] Linux video capture interface: v2.00
[   12.620565] nvidia 0000:01:00.0: setting latency timer to 64
[   12.620577] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   12.620799] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.88  Wed Mar 27 14:31:12 PDT 2013
[   12.664380] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[   12.673379] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input13
[   12.673465] usbcore: registered new interface driver uvcvideo
[   12.673467] USB Video Class driver (1.1.1)
[   12.700423] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   12.700507] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   12.706154] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-5000-5.ucode into memory
[   12.706161] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692
[   12.706392] Registered led device: phy0-led
[   12.730108] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   12.832069] usb 2-3.1: device not accepting address 7, error -32
[   12.847793] cfg80211: World regulatory domain updated:
[   12.847796] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.847799] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.847802] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.847805] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.847808] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.847811] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.920137] usb 2-3.1: new low-speed USB device number 8 using ehci_hcd
[   13.328028] usb 2-3.1: device not accepting address 8, error -32
[   13.329313] hub 2-3:1.0: unable to enumerate USB device on port 1
[   13.568047] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[   13.745017] usb 8-1: New USB device found, idVendor=046d, idProduct=c050
[   13.745021] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.745025] usb 8-1: Product: USB-PS/2 Optical Mouse
[   13.745028] usb 8-1: Manufacturer: Logitech
[   13.827253] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb8/8-1/8-1:1.0/input/input16
[   13.827385] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-1/input0
[   13.827401] usbcore: registered new interface driver usbhid
[   13.827403] usbhid: USB HID core driver
[   14.893328] Adding 4159484k swap on /dev/sda6.  Priority:-1 extents:1 across:4159484k
[   14.922766] EXT4-fs (sda5): re-mounted. Opts: (null)
[   15.434513] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   15.603300] loop: module loaded
[   16.372469] fuse init (API version 7.17)
[   17.710361] RPC: Registered named UNIX socket transport module.
[   17.710364] RPC: Registered udp transport module.
[   17.710366] RPC: Registered tcp transport module.
[   17.710368] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.776907] FS-Cache: Loaded
[   17.834241] FS-Cache: Netfs 'nfs' registered for caching
[   17.849119] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.248215] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[   21.947093] Bluetooth: Core ver 2.16
[   21.947244] NET: Registered protocol family 31
[   21.947247] Bluetooth: HCI device and connection manager initialized
[   21.947250] Bluetooth: HCI socket layer initialized
[   21.947252] Bluetooth: L2CAP socket layer initialized
[   21.947257] Bluetooth: SCO socket layer initialized
[   21.960226] Bluetooth: RFCOMM TTY layer initialized
[   21.960231] Bluetooth: RFCOMM socket layer initialized
[   21.960233] Bluetooth: RFCOMM ver 1.11
[   22.088678] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.088681] Bluetooth: BNEP filters: protocol multicast
[   22.368686] lp: driver loaded but no devices found
[   22.524653] ppdev: user-space parallel port driver
[   25.856212] usb 2-3.1: new low-speed USB device number 9 using ehci_hcd
[   25.944212] usb 2-3.1: device descriptor read/64, error -32
[   26.136225] usb 2-3.1: device descriptor read/64, error -32
[   26.328217] usb 2-3.1: new low-speed USB device number 10 using ehci_hcd
[   26.416100] usb 2-3.1: device descriptor read/64, error -32
[   26.608573] usb 2-3.1: device descriptor read/64, error -32
[   26.611335] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   26.614342] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   26.729034] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   26.732039] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   26.778923] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.784931] r8169 0000:05:00.0: eth0: link down
[   26.785113] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.800220] usb 2-3.1: new low-speed USB device number 11 using ehci_hcd
[   27.208099] usb 2-3.1: device not accepting address 11, error -32
[   27.296223] usb 2-3.1: new low-speed USB device number 12 using ehci_hcd
[   27.704155] usb 2-3.1: device not accepting address 12, error -32
[   27.704372] hub 2-3:1.0: unable to enumerate USB device on port 1
[   28.420105] CE: hpet increased min_delta_ns to 20113 nsec
[   29.093201] NVRM: Your system is not currently configured to drive a VGA console
[   29.093211] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   29.093218] NVRM: requires the use of a text-mode VGA console. Use of other console
[   29.093225] NVRM: drivers including, but not limited to, vesafb, may result in
[   29.093231] NVRM: corruption and stability problems, and is not supported.
[   33.470096] wlan0: authenticate with 00:24:b2:dc:3b:0e (try 1)
[   33.473163] wlan0: authenticated
[   33.477307] wlan0: associate with 00:24:b2:dc:3b:0e (try 1)
[   33.480670] wlan0: RX AssocResp from 00:24:b2:dc:3b:0e (capab=0x401 status=0 aid=1)
[   33.480674] wlan0: associated
[   33.484251] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   44.048247] wlan0: no IPv6 routers present
 



Le moins que l'on puisse dire c'est qu'il y a du grain à moudre...
En ce qui me concerne, j'ai tenté avec Smart puis gsmartcontrol de voir ce que ça disait..
ça  n'a rien donné.

Parmi les diverses solutions proposées, une consistait à déconnecter complètement la machine de l'alimentation en débranchant le cordon secteur pendant quelques minutes. Je suppose que cela devait permettre au circuit de contrôle des tensions d'alimentation de se réinitialiser, comme le 5V est aussi utilisé pour le "Wake On USB".

Je vais enlever la batterie et me déconnecter, le temps de casser la croûte.

Est-ce que par hasard, ça ne serait lié à une mauvaise info dans le coeur de la bête????????

@+

Dernière modification par dudulle24 (08-09-2013 18:29:56)

Hors ligne

#12 08-09-2013 17:47:31

MicP
Invité

Re : device descriptor read/64, error -32 RESOLU

Effectivement !!
Si tu pouvais selectionner tout ce texte et l'entourer de balises "code" :
[­code] texte entouré de balises code [­/code]
il y aura une barre de défilement vertical qui limitera son encombrement vertical.

N'utilise pas le copier/coller pour recopier les balises ci-dessous: je les ai "truquées" pour qu'elles apparaissent sans être interprétées.
Utilise plutôt le bouton "CODE" de la fenêtre d'édition.

J'ai oublié de demander si ces messages continuaient à apparaître même la clef USB débranchée.

Merci (et bon appétit)

http://forum.manjaro.org/index.php?topic=5423.0

NOTE: Excuse moi pour le manque de réactivité: je donne en même temps un coup de main au "plombier" qui est en train de changer mon cumulus (2 mois que je suis sans eau chaude...),
ce qui a nécessité la coupure de courant etc....

Dernière modification par MicP (08-09-2013 18:06:38)

#13 08-09-2013 18:32:16

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Ben mon ieu.....

Enfin, il sera temps de prendre une douche!:D

Hors ligne

#14 08-09-2013 20:39:00

MicP
Invité

Re : device descriptor read/64, error -32 RESOLU

De toutes façon : "il n'y a que les gens sales qui se lavent"
Non ça va, je préfère la baignoire et comme j'ai des voisines, ça me fait en plus un "bon" prétexte...

Dernière modification par MicP (08-09-2013 20:41:39)

#15 09-09-2013 08:08:53

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Opportuniste!

Bon, pendant que certains vont chez les copines pour se laver, j'ai avancé.
Du moins, je le crois.

Plus d'erreurs USB pour le moment.
J'ai tout simplement débranché tous mes accessoires USB Y compris mon concentrateur USB. et, tout - pour le moment - a l'air de fonctionner.
J'ai tout rebranché: OK.

J'attends encore un peu pour marquer le fil RESOLU.
Si c'est le cas, cela pourrait donner du grain à moudre à pas mal de gens qui s'embouscaillent avec ce problème je crois

Merci à vous deux.

@+

Dernière modification par dudulle24 (09-09-2013 08:14:51)

Hors ligne

#16 09-09-2013 08:49:54

MicP
Invité

Re : device descriptor read/64, error -32 RESOLU

Après avoir enlevé la batterie et coupé l'alimentation, puis remis en route la machine, est-ce que problème s'est manifesté ?

#17 09-09-2013 09:41:32

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Oui.

Dernière modification par dudulle24 (09-09-2013 10:05:52)

Hors ligne

#18 09-09-2013 13:52:41

MicP
Invité

Re : device descriptor read/64, error -32 RESOLU

Il reste donc à tester un après l'autre chaque périphérique USB.

1°/ connecter un des périp?ériques USB
2°/ entrer la commande suivante:

dmesg | grep "error -32"


Si pas de retour de la commande dmesg => périphérique semble OK, et on peux tester le suivant après avoir démarré.
Si retour erreur => et d'un de repéré, reste à voir si c'est le seul...

Un après l'autre (sans le Hub)
Le Hub tout seul
Le Hub + chacun
et le tout en redémarrant la machine entre chaque test (pour être un peu plus sûr).

#19 09-09-2013 16:22:27

dudulle24
Membre
Lieu : 24200
Distrib. : Debian GNU/Linux 7 Wheezy
Noyau : 3.2.0-4-686-pae
(G)UI : xfce4 Thunar
Inscription : 02-05-2013

Re : device descriptor read/64, error -32 RESOLU

Il reste donc à tester un après l'autre chaque périphérique USB

Bon, moi, je veux bien mais, ni boot.log ni dmesg ne me signalent plus d'erreurs pour le moment.
J'ai déjà réessayé tous mes USB en les rajoutant un à un.
Pas un seul message d'erreurs pour l'instant.
Crois moi, j'en ai fait des reboot!

Je vais donc temporiser un peu et observer si ça recommence. Auquel cas je te tiendrai au courant en refaisant les tests.

Par contre, j'aimerais bien savoir quelle c...... j'ai pu faire pour connaître cette situation!
Mauvaise déconnexion d'un périphérique?
Ça, nous ne le saurons sûrement jamais.

Problème pas encore résolu. Le patient est en observation!

@+

Hors ligne

Pied de page des forums