logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 07-05-2015 17:32:16

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Installation Asus UX305F (Zenbook)

Bonjour à tous,

Après quelques déboires avec Ubuntu, je suis penché sur Debian 8 nouvellement sorti avec l'interface Gnome par défaut. J'y ai tout trouvé pour mes pilotes, mais mon interface graphique reste hyper lente, lags etc. Impossible de lire une vidéo sous VLC par exemple.

Je pense avoir zappé quelques chose, mais je ne sais pas quoi. Avez vous une petite idée pour m'aider ? Il est basé sur un Intel Core M.

Merci d'avance smile

Dernière modification par BenUp (07-05-2015 17:44:29)


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#2 07-05-2015 21:35:22

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

Personne n'a une petite idée du problème ?

Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#3 07-05-2015 22:00:54

bendia
Chadministrateur
Distrib. : openSUSE Tumbleweed, Buster
Noyau : Linux 5.9.1-2-default + Linux 4.19.0-12-amd64
(G)UI : Gnome + Console et un peu Fluxbox
Inscription : 20-03-2012
Site Web

Re : Installation Asus UX305F (Zenbook)

Bonjour et Bienvenue smile

Peut-être peux-tu essayer de donner un peu plus d'infos sur le matériel avec le retour des commandes genre

lspci



En utilisant la coloration syntaxique qui va bien


Ben
___________________
La seule question bête, c'est celle qu'on ne pose pas.

En ligne

#4 08-05-2015 07:57:16

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

Voici la réponse :

lspci



00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 08)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 08)
00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 08)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
root@ASUS-UX305F:/home/benjamin#
 



J'avoue que si j'arrive à faire tourner Debian 8 (branche stable) je quitte Ubuntu sur cette machine.


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#5 08-05-2015 08:07:50

mksmn
Membre
Lieu : Ile de France
Distrib. : Debian GNU/Linux Stable (Bookworm)
Noyau : Noyau Linux 6.1.0-xx-amd64
(G)UI : Xfce Desktop 4.18
Inscription : 30-06-2008

Re : Installation Asus UX305F (Zenbook)

salut,

as tu installé les paquets firmware-linux?

Debian, c'est bien!
(De retour sous Debian, soyez cool.)

En ligne

#6 08-05-2015 08:12:24

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

Oui en effet c'est installé, je ne l'avais pas fait, mais ça ne change rien du tout. Si je bouge une fenêtre ça lag toujours.

En fait je n'ai aucune accélération graphique. C'est con, mais ça fonctionne sur Ubuntu, donc ça doit le faire aussi sur Debian.

Dernière modification par BenUp (08-05-2015 08:16:09)


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#7 08-05-2015 08:17:41

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation Asus UX305F (Zenbook)

Bonjour,

Le core M est quand même moins puissant qu'un core i3, et je ne sais pas combien tu as de RAM.
Je me demande si tu peux faire tourner le gros Gnome de façon fluide là-dessus.

Tu as quel environnement de bureau sous Ubuntu ?

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#8 08-05-2015 08:20:29

mksmn
Membre
Lieu : Ile de France
Distrib. : Debian GNU/Linux Stable (Bookworm)
Noyau : Noyau Linux 6.1.0-xx-amd64
(G)UI : Xfce Desktop 4.18
Inscription : 30-06-2008

Re : Installation Asus UX305F (Zenbook)

salut,

tu as trouvé tout les pilotes, c'est à dire, tu as installé le pilote graphique proprio ou bien le libre?

c'est du intel ok, j'avais pas vu.

Dernière modification par mksmn (08-05-2015 08:21:28)


Debian, c'est bien!
(De retour sous Debian, soyez cool.)

En ligne

#9 08-05-2015 08:20:57

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

J'ai testé Ubuntu 10.04 LTS et la 15.04 sous Gnome 3 et Unity 7 aucun problème, ça fonctionne super bien. Donc là il doit avoir une subtilité.

J'ai mis les dépôts avec les non-free, donc j'ai mis aussi les firmwares non-free sinon j'ai pas le Wifi.

Dernière modification par BenUp (08-05-2015 08:22:50)


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#10 08-05-2015 08:24:06

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

mksmn a écrit :

salut,

tu as trouvé tout les pilotes, c'est à dire, tu as installé le pilote graphique proprio ou bien le libre?

c'est du intel ok, j'avais pas vu.



Oui j'ai pris un portable full Intel car c'est souvent bien géré sur GNU/Linux.


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#11 08-05-2015 08:26:42

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation Asus UX305F (Zenbook)

Que donne :

cat /var/log/Xorg.0.log


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#12 08-05-2015 08:26:52

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

J'ai tapé cette commande pour vérifier l'accélération :

root@ASUS-UX305F:/home/benjamin# glxinfo | grep "direct rendering"
direct rendering: Yes



Donc c'est activé, mais l'interface lag, impossible de lire une vidéo sous VLC ou autre. Bref je ne comprends pas.


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#13 08-05-2015 08:27:35

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

root@ASUS-UX305F:/home/benjamin# cat /var/log/Xorg.0.log
[     3.535]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[     3.536] X Protocol Version 11, Revision 0
[     3.536] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     3.536] Current Operating System: Linux ASUS-UX305F 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64
[     3.536] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/ASUS--UX305F--vg-root ro quiet
[     3.536] Build Date: 11 February 2015  12:32:02AM
[     3.536] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[     3.536] Current version of pixman: 0.32.6
[     3.536]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     3.536] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.536] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May  8 09:10:42 2015
[     3.538] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.543] (==) No Layout section.  Using the first Screen section.
[     3.543] (==) No screen section available. Using defaults.
[     3.543] (**) |-->Screen "Default Screen Section" (0)
[     3.543] (**) |   |-->Monitor "<default monitor>"
[     3.544] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     3.544] (==) Automatically adding devices
[     3.544] (==) Automatically enabling devices
[     3.544] (==) Automatically adding GPU devices
[     3.548] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.548]  Entry deleted from font path.
[     3.555] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     3.555] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.555] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.556] (II) Loader magic: 0x7f00c1950d80
[     3.556] (II) Module ABI versions:
[     3.556]  X.Org ANSI C Emulation: 0.4
[     3.556]  X.Org Video Driver: 18.0
[     3.556]  X.Org XInput driver : 21.0
[     3.556]  X.Org Server Extension : 8.0
[     3.556] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.557] (--) PCI:*(0:0:2:0) 8086:161e:1043:181d rev 8, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64
[     3.558] (II) LoadModule: "glx"
[     3.558] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.569] (II) Module glx: vendor="X.Org Foundation"
[     3.569]  compiled for 1.16.4, module version = 1.0.0
[     3.569]  ABI class: X.Org Server Extension, version 8.0
[     3.569] (==) AIGLX enabled
[     3.569] (==) Matched intel as autoconfigured driver 0
[     3.569] (==) Matched intel as autoconfigured driver 1
[     3.569] (==) Matched modesetting as autoconfigured driver 2
[     3.569] (==) Matched fbdev as autoconfigured driver 3
[     3.569] (==) Matched vesa as autoconfigured driver 4
[     3.569] (==) Assigned the driver to the xf86ConfigLayout
[     3.569] (II) LoadModule: "intel"
[     3.569] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     3.572] (II) Module intel: vendor="X.Org Foundation"
[     3.572]  compiled for 1.15.99.904, module version = 2.21.15
[     3.572]  Module class: X.Org Video Driver
[     3.572]  ABI class: X.Org Video Driver, version 18.0
[     3.572] (II) LoadModule: "modesetting"
[     3.572] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.573] (II) Module modesetting: vendor="X.Org Foundation"
[     3.573]  compiled for 1.15.99.904, module version = 0.9.0
[     3.573]  Module class: X.Org Video Driver
[     3.573]  ABI class: X.Org Video Driver, version 18.0
[     3.573] (II) LoadModule: "fbdev"
[     3.573] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.574] (II) Module fbdev: vendor="X.Org Foundation"
[     3.574]  compiled for 1.15.99.904, module version = 0.4.4
[     3.574]  Module class: X.Org Video Driver
[     3.574]  ABI class: X.Org Video Driver, version 18.0
[     3.574] (II) LoadModule: "vesa"
[     3.574] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.574] (II) Module vesa: vendor="X.Org Foundation"
[     3.574]  compiled for 1.15.99.904, module version = 2.3.3
[     3.574]  Module class: X.Org Video Driver
[     3.574]  ABI class: X.Org Video Driver, version 18.0
[     3.574] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[     3.575] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.575] (II) FBDEV: driver for framebuffer: fbdev
[     3.575] (II) VESA: driver for VESA chipsets: vesa
[     3.575] (++) using VT number 7

[     3.582] (WW) Falling back to old probe method for modesetting
[     3.582] (WW) Falling back to old probe method for fbdev
[     3.582] (II) Loading sub module "fbdevhw"
[     3.582] (II) LoadModule: "fbdevhw"
[     3.583] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.583] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.583]  compiled for 1.16.4, module version = 0.0.2
[     3.583]  ABI class: X.Org Video Driver, version 18.0
[     3.583] (WW) Falling back to old probe method for vesa
[     3.583] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     3.583] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     3.583] (==) intel(0): RGB weight 888
[     3.583] (==) intel(0): Default visual is TrueColor
[     3.583] (WW) intel(0): Unknown chipset
[     3.583] (**) intel(0): Relaxed fencing disabled
[     3.583] (**) intel(0): Wait on SwapBuffers? enabled
[     3.583] (**) intel(0): Triple buffering? enabled
[     3.583] (**) intel(0): Framebuffer linear
[     3.583] (**) intel(0): Pixmaps tiled
[     3.583] (**) intel(0): 3D buffers tiled
[     3.583] (**) intel(0): SwapBuffers wait enabled
[     3.583] (==) intel(0): video overlay key set to 0x101fe
[     3.584] (II) intel(0): Output eDP1 has no monitor section
[     3.584] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[     3.585] (II) intel(0): Output HDMI1 has no monitor section
[     3.585] (II) intel(0): EDID for output eDP1
[     3.585] (II) intel(0): Manufacturer: AUO  Model: 212d  Serial#: 0
[     3.585] (II) intel(0): Year: 2013  Week: 0
[     3.585] (II) intel(0): EDID Version: 1.4
[     3.585] (II) intel(0): Digital Display Input
[     3.585] (II) intel(0): 6 bits per channel
[     3.585] (II) intel(0): Digital interface is DisplayPort
[     3.585] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 17
[     3.585] (II) intel(0): Gamma: 2.20
[     3.585] (II) intel(0): No DPMS capabilities specified
[     3.585] (II) intel(0): Supported color encodings: RGB 4:4:4
[     3.585] (II) intel(0): First detailed timing is preferred mode
[     3.585] (II) intel(0): Preferred mode is native pixel format and refresh rate
[     3.585] (II) intel(0): redX: 0.596 redY: 0.345   greenX: 0.320 greenY: 0.584
[     3.585] (II) intel(0): blueX: 0.148 blueY: 0.123   whiteX: 0.302 whiteY: 0.331
[     3.585] (II) intel(0): Manufacturer's mask: 0
[     3.586] (II) intel(0): Supported detailed timing:
[     3.586] (II) intel(0): clock: 138.5 MHz   Image Size:  293 x 165 mm
[     3.586] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[     3.586] (II) intel(0): v_active: 1080  v_sync: 1088  v_sync_end 1102 v_blanking: 1110 v_border: 0
[     3.586] (II) intel(0): Unknown vendor-specific block f
[     3.586] (II) intel(0):  AUO
[     3.586] (II) intel(0):  B133HAN02.1
[     3.586] (II) intel(0): EDID (in hex):
[     3.586] (II) intel(0):   00ffffffffffff0006af2d2100000000
[     3.586] (II) intel(0):   00170104951d11780292279858529526
[     3.586] (II) intel(0):   1f4d5400000001010101010101010101
[     3.586] (II) intel(0):   0101010101011d3680a070381e403020
[     3.586] (II) intel(0):   8e0025a5100000180000000f00000000
[     3.586] (II) intel(0):   00000000000000000020000000fe0041
[     3.586] (II) intel(0):   554f0a202020202020202020000000fe
[     3.586] (II) intel(0):   004231333348414e30322e31200a0006
[     3.586] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[     3.586] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[     3.586] (II) intel(0): Printing probed modes for output eDP1
[     3.586] (II) intel(0): Modeline "1920x1080"x60.0  138.53  1920 1968 2000 2080  1080 1088 1102 1110 -hsync -vsync (66.6 kHz eP)
[     3.586] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     3.586] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     3.586] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     3.586] (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[     3.586] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     3.586] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     3.586] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[     3.586] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     3.586] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[     3.586] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[     3.586] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[     3.586] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     3.586] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     3.586] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     3.586] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     3.587] (II) intel(0): EDID for output HDMI1
[     3.587] (II) intel(0): Output eDP1 connected
[     3.587] (II) intel(0): Output HDMI1 disconnected
[     3.587] (II) intel(0): Using exact sizes for initial modes
[     3.587] (II) intel(0): Output eDP1 using initial mode 1920x1080
[     3.587] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     3.587] (II) intel(0): Kernel page flipping support detected, enabling
[     3.587] (==) intel(0): DPI set to (96, 96)
[     3.587] (II) Loading sub module "fb"
[     3.587] (II) LoadModule: "fb"
[     3.587] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.589] (II) Module fb: vendor="X.Org Foundation"
[     3.589]  compiled for 1.16.4, module version = 1.0.0
[     3.589]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.589] (II) Loading sub module "dri2"
[     3.589] (II) LoadModule: "dri2"
[     3.589] (II) Module "dri2" already built-in
[     3.589] (II) UnloadModule: "modesetting"
[     3.589] (II) Unloading modesetting
[     3.589] (II) UnloadModule: "fbdev"
[     3.589] (II) Unloading fbdev
[     3.589] (II) UnloadSubModule: "fbdevhw"
[     3.589] (II) Unloading fbdevhw
[     3.589] (II) UnloadModule: "vesa"
[     3.589] (II) Unloading vesa
[     3.589] (==) Depth 24 pixmap format is 32 bpp
[     3.589] (WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks
[     3.589] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[     3.593] (II) UXA(0): Driver registered support for the following operations:
[     3.593] (II)         solid
[     3.593] (II)         copy
[     3.593] (II)         composite (RENDER acceleration)
[     3.593] (II)         put_image
[     3.593] (II)         get_image
[     3.593] (==) intel(0): Backing store enabled
[     3.593] (==) intel(0): Silken mouse enabled
[     3.594] (II) intel(0): Initializing HW Cursor
[     3.594] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     3.596] (==) intel(0): DPMS enabled
[     3.596] (==) intel(0): Intel XvMC decoder disabled
[     3.596] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[     3.596] (II) intel(0): direct rendering: Failed
[     3.596] (==) intel(0): hotplug detection: "enabled"
[     3.624] (--) RandR disabled
[     3.630] (II) SELinux: Disabled on system
[     3.631] (II) AIGLX: Screen 0 is not DRI2 capable
[     3.631] (EE) AIGLX: reverting to software rendering
[     3.712] (II) AIGLX: Loaded and initialized swrast
[     3.712] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     3.712] (II) intel(0): Setting screen physical size to 508 x 285
[     3.773] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     3.773] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     3.773] (II) LoadModule: "evdev"
[     3.773] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     3.775] (II) Module evdev: vendor="X.Org Foundation"
[     3.775]  compiled for 1.16.0, module version = 2.9.0
[     3.775]  Module class: X.Org XInput Driver
[     3.775]  ABI class: X.Org XInput driver, version 21.0
[     3.775] (II) Using input driver 'evdev' for 'Power Button'
[     3.775] (**) Power Button: always reports core events
[     3.775] (**) evdev: Power Button: Device: "/dev/input/event3"
[     3.776] (--) evdev: Power Button: Vendor 0 Product 0x1
[     3.776] (--) evdev: Power Button: Found keys
[     3.776] (II) evdev: Power Button: Configuring as keyboard
[     3.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[     3.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     3.776] (**) Option "xkb_rules" "evdev"
[     3.776] (**) Option "xkb_model" "pc105"
[     3.776] (**) Option "xkb_layout" "fr"
[     3.776] (**) Option "xkb_variant" "latin9"
[     3.795] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     3.795] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     3.795] (II) Using input driver 'evdev' for 'Video Bus'
[     3.795] (**) Video Bus: always reports core events
[     3.795] (**) evdev: Video Bus: Device: "/dev/input/event9"
[     3.795] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     3.795] (--) evdev: Video Bus: Found keys
[     3.795] (II) evdev: Video Bus: Configuring as keyboard
[     3.795] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event9"
[     3.795] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     3.795] (**) Option "xkb_rules" "evdev"
[     3.795] (**) Option "xkb_model" "pc105"
[     3.795] (**) Option "xkb_layout" "fr"
[     3.795] (**) Option "xkb_variant" "latin9"
[     3.795] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     3.795] (II) No input driver specified, ignoring this device.
[     3.795] (II) This device may have been added with another device file.
[     3.795] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     3.795] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     3.795] (II) Using input driver 'evdev' for 'Sleep Button'
[     3.795] (**) Sleep Button: always reports core events
[     3.795] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[     3.795] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     3.795] (--) evdev: Sleep Button: Found keys
[     3.795] (II) evdev: Sleep Button: Configuring as keyboard
[     3.795] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[     3.795] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     3.795] (**) Option "xkb_rules" "evdev"
[     3.795] (**) Option "xkb_model" "pc105"
[     3.795] (**) Option "xkb_layout" "fr"
[     3.795] (**) Option "xkb_variant" "latin9"
[     3.796] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[     3.796] (II) No input driver specified, ignoring this device.
[     3.796] (II) This device may have been added with another device file.
[     3.796] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[     3.796] (II) No input driver specified, ignoring this device.
[     3.796] (II) This device may have been added with another device file.
[     3.796] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[     3.796] (II) No input driver specified, ignoring this device.
[     3.796] (II) This device may have been added with another device file.
[     3.797] (II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/event6)
[     3.797] (**) Razer  Razer Abyssus: Applying InputClass "evdev pointer catchall"
[     3.797] (II) Using input driver 'evdev' for 'Razer  Razer Abyssus'
[     3.797] (**) Razer  Razer Abyssus: always reports core events
[     3.797] (**) evdev: Razer  Razer Abyssus: Device: "/dev/input/event6"
[     3.797] (--) evdev: Razer  Razer Abyssus: Vendor 0x1532 Product 0x1c
[     3.797] (--) evdev: Razer  Razer Abyssus: Found 11 mouse buttons
[     3.797] (--) evdev: Razer  Razer Abyssus: Found scroll wheel(s)
[     3.797] (--) evdev: Razer  Razer Abyssus: Found relative axes
[     3.797] (--) evdev: Razer  Razer Abyssus: Found x and y relative axes
[     3.797] (II) evdev: Razer  Razer Abyssus: Configuring as mouse
[     3.797] (II) evdev: Razer  Razer Abyssus: Adding scrollwheel support
[     3.797] (**) evdev: Razer  Razer Abyssus: YAxisMapping: buttons 4 and 5
[     3.797] (**) evdev: Razer  Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     3.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:1532:001C.0001/input/input14/event6"
[     3.797] (II) XINPUT: Adding extended input device "Razer  Razer Abyssus" (type: MOUSE, id 9)
[     3.797] (II) evdev: Razer  Razer Abyssus: initialized for relative axes.
[     3.797] (**) Razer  Razer Abyssus: (accel) keeping acceleration scheme 1
[     3.797] (**) Razer  Razer Abyssus: (accel) acceleration profile 0
[     3.797] (**) Razer  Razer Abyssus: (accel) acceleration factor: 2.000
[     3.797] (**) Razer  Razer Abyssus: (accel) acceleration threshold: 4
[     3.797] (II) config/udev: Adding input device Razer  Razer Abyssus (/dev/input/mouse0)
[     3.797] (II) No input driver specified, ignoring this device.
[     3.797] (II) This device may have been added with another device file.
[     3.797] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event7)
[     3.797] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[     3.797] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[     3.798] (**) USB2.0 UVC HD Webcam: always reports core events
[     3.798] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event7"
[     3.798] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x64e Product 0x9700
[     3.798] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[     3.798] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[     3.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input15/event7"
[     3.798] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 10)
[     3.798] (**) Option "xkb_rules" "evdev"
[     3.798] (**) Option "xkb_model" "pc105"
[     3.798] (**) Option "xkb_layout" "fr"
[     3.798] (**) Option "xkb_variant" "latin9"
[     3.798] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[     3.798] (II) No input driver specified, ignoring this device.
[     3.798] (II) This device may have been added with another device file.
[     3.798] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[     3.798] (II) No input driver specified, ignoring this device.
[     3.798] (II) This device may have been added with another device file.
[     3.798] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[     3.798] (II) No input driver specified, ignoring this device.
[     3.798] (II) This device may have been added with another device file.
[     3.799] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event5)
[     3.799] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     3.799] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[     3.799] (**) Asus WMI hotkeys: always reports core events
[     3.799] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event5"
[     3.799] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[     3.799] (--) evdev: Asus WMI hotkeys: Found keys
[     3.799] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[     3.799] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input13/event5"
[     3.799] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[     3.799] (**) Option "xkb_rules" "evdev"
[     3.799] (**) Option "xkb_model" "pc105"
[     3.799] (**) Option "xkb_layout" "fr"
[     3.799] (**) Option "xkb_variant" "latin9"
[     3.799] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     3.799] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     3.799] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     3.799] (**) AT Translated Set 2 keyboard: always reports core events
[     3.799] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     3.799] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     3.799] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     3.799] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     3.799] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     3.799] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     3.799] (**) Option "xkb_rules" "evdev"
[     3.799] (**) Option "xkb_model" "pc105"
[     3.799] (**) Option "xkb_layout" "fr"
[     3.799] (**) Option "xkb_variant" "latin9"
[     3.800] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[     3.800] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     3.800] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     3.800] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     3.800] (II) LoadModule: "synaptics"
[     3.800] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     3.801] (II) Module synaptics: vendor="X.Org Foundation"
[     3.801]  compiled for 1.16.0.901, module version = 1.8.99
[     3.801]  Module class: X.Org XInput Driver
[     3.801]  ABI class: X.Org XInput driver, version 21.0
[     3.801] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     3.801] (**) ETPS/2 Elantech Touchpad: always reports core events
[     3.801] (**) Option "Device" "/dev/input/event8"
[     3.860] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[     3.860] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[     3.860] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[     3.860] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     3.860] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     3.860] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[     3.860] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     3.860] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     3.860] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     3.860] (**) ETPS/2 Elantech Touchpad: always reports core events
[     3.932] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event8"
[     3.932] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[     3.932] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     3.932] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     3.932] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[     3.932] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     3.932] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     3.932] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     3.932] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     3.932] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     3.933] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[     3.933] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     3.933] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[     3.933] (II) No input driver specified, ignoring this device.
[     3.933] (II) This device may have been added with another device file.
[     4.492] (II) intel(0): EDID vendor "AUO", prod id 8493
[     4.492] (II) intel(0): Printing DDC gathered Modelines:
[     4.492] (II) intel(0): Modeline "1920x1080"x0.0  138.53  1920 1968 2000 2080  1080 1088 1102 1110 -hsync -vsync (66.6 kHz eP)
[     5.418] (II) intel(0): EDID vendor "AUO", prod id 8493
[     5.418] (II) intel(0): Printing DDC gathered Modelines:
[     5.418] (II) intel(0): Modeline "1920x1080"x0.0  138.53  1920 1968 2000 2080  1080 1088 1102 1110 -hsync -vsync (66.6 kHz eP)
[    11.785] (II) intel(0): EDID vendor "AUO", prod id 8493
[    11.785] (II) intel(0): Printing DDC gathered Modelines:
[    11.785] (II) intel(0): Modeline "1920x1080"x0.0  138.53  1920 1968 2000 2080  1080 1088 1102 1110 -hsync -vsync (66.6 kHz eP)
[    12.737] (II) intel(0): EDID vendor "AUO", prod id 8493
[    12.737] (II) intel(0): Printing DDC gathered Modelines:
[    12.737] (II) intel(0): Modeline "1920x1080"x0.0  138.53  1920 1968 2000 2080  1080 1088 1102 1110 -hsync -vsync (66.6 kHz eP)
 


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#14 08-05-2015 08:31:36

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation Asus UX305F (Zenbook)

Quelques warning qui m'interrogent et puis :

(EE) AIGLX: reverting to software rendering


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#15 08-05-2015 08:34:18

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

Qu'est ce que c'est ?

Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#16 08-05-2015 08:35:45

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation Asus UX305F (Zenbook)

Je suppose qu'il y a un problème au niveau du pilote graphique mais je n'ai jamais rencontré cette erreur.

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#17 08-05-2015 08:52:49

mksmn
Membre
Lieu : Ile de France
Distrib. : Debian GNU/Linux Stable (Bookworm)
Noyau : Noyau Linux 6.1.0-xx-amd64
(G)UI : Xfce Desktop 4.18
Inscription : 30-06-2008

Re : Installation Asus UX305F (Zenbook)

ce paquet est-il installé ,

i965-va-driver


Debian, c'est bien!
(De retour sous Debian, soyez cool.)

En ligne

#18 08-05-2015 08:56:43

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

mksmn a écrit :

ce paquet est-il installé ,

i965-va-driver



Oui en effet il est bien installé.


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#19 08-05-2015 09:01:12

mksmn
Membre
Lieu : Ile de France
Distrib. : Debian GNU/Linux Stable (Bookworm)
Noyau : Noyau Linux 6.1.0-xx-amd64
(G)UI : Xfce Desktop 4.18
Inscription : 30-06-2008

Re : Installation Asus UX305F (Zenbook)

tu as bien

firmware-linux, firmware-linux-nonfree, firmware-linux-free
 


Debian, c'est bien!
(De retour sous Debian, soyez cool.)

En ligne

#20 08-05-2015 09:03:58

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

Oui en effet, mais j'ai remarqué une chose, je n'ai pas de

/etc/X11/xorg.conf

ici


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#21 08-05-2015 09:32:39

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

J'ai essayé ça :

root@ASUS-UX305F:/home/benjamin# Xorg -configure



root@ASUS-UX305F:/home/benjamin# mv /root/xorg.conf.new /etc/X11/xorg.conf



Mais ça ne change rien


Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#22 08-05-2015 09:33:04

baba78300
Membre
Inscription : 08-05-2015

Re : Installation Asus UX305F (Zenbook)

Bonjour,

Je possède le même ordinateur, au regret, j'ai dû installer Ubuntu, car la carte graphique n'est pas optimisée et de plus, le Bluetooth se connecte pas à mes enceintes Bluetooth tout cela fonctionne sur Ubuntu.
Si quelqu'un aurait la gentillesse de détailler les instructions pour ce modèle ou équivalent.
Vous remerciant d'avance.

Hors ligne

#23 08-05-2015 09:35:23

BenUp
Membre
Lieu : Ici avec vous !
Distrib. : Debian GNU/Linux 12 (bookworm)
Noyau : 6.1.0-13-amd64
(G)UI : Gnome 43.6
Inscription : 07-05-2015
Site Web

Re : Installation Asus UX305F (Zenbook)

Oui, je cherche depuis un moment c'est chiant big_smile Mais je ne craque pas !

Aventurier dans le libre, mais pas seulement ! Machine pour Linux, Microsoft Surface Laptop Go2 Intel® i5 > Materiel.net PlayerOne Intel® i5 / Nvidia Geforce 3060RTX HP Z230 Intel® i5 / AMD RX560.

Hors ligne

#24 08-05-2015 09:42:21

baba78300
Membre
Inscription : 08-05-2015

Re : Installation Asus UX305F (Zenbook)

C'est étonnant, car ce modèle de portable est répandu. Mais sûr, le forum Debian anglais, on ne trouve pas d'installation avec Jessie.:)

Hors ligne

#25 08-05-2015 09:50:16

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : Installation Asus UX305F (Zenbook)

BenUp a écrit :

je n'ai pas de

/etc/X11/xorg.conf

Ce fichier n'est plus créé systématiquement car Xorg fait le paramétrage à la volée.
Maintenant, dans certains cas, on en a besoin.


Que contient-il après ta manip ?


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

Pied de page des forums