logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 12-11-2015 06:38:13

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Bonjour a tous,

Suite a mon soucis d'extinction "lente" sous LXDE, et aussi par envie de changer de DE pour diverses raisons, j'ai tenter une installation "propre" de Gnome, sous Jessie Stable.

Au bout de quelque temps, très variable, cela peux aller de l'ordre de quelques minutes a quelques dizaines de minutes, le DE Freeze, et je peux, de manière aléatoire aussi, arreter l'ordi, "proprement" via un ctrl+alt+del, parfois, toutes combinaisons au clavier est impossible.

Je suis passer sous Maté, rebelote, meme soucis.
Je penchais pour un soucis graphique, j'ai donc, en plus des linux non free firmware, qui sont installer, les drivers flgrx...Là, il y'eu du mieux, voir j'ai cru mon problème règler.
Mais lors de l'ajout d'un élément au tableau de bord, de nouveau, un freeze général.

J'utilise le sourcelist "de base", avec les contrib et non free d'indiqués. Pas de backports ou choses de ce genre.

Si cela peux aider :

seb@abracadabra:~$

aptitude search ~i~dradeon




i A fglrx-atieventsd                - events daemon for the non-free ATI/AMD Rad
i   fglrx-control                   - control panel for the non-free ATI/AMD Rad
i   fglrx-driver                    - non-free ATI/AMD RadeonHD display driver  
i A fglrx-modules-dkms              - dkms module source for the non-free ATI/AM
i   firmware-linux-nonfree          - Binary firmware for various drivers in the
i A libdrm-radeon1                  - interface pour les services DRM du noyau s
i A libfglrx                        - non-free ATI/AMD RadeonHD display driver (
i A libfglrx-amdxvba1               - AMD XvBA (X-Video Bitstream Acceleration)
i A libgl1-fglrx-glx                - proprietary libGL for the non-free ATI/AMD
i A mplayer2                        - next generation movie player for Unix-like
i A xserver-xorg-video-ati          - serveur X X.org - enveloppe pour les pilot
i A xserver-xorg-video-radeon       - serveur X X.Org - pilote vidéo AMD/ATI Rad
seb@abracadabra:~$
 



thumb_3126121Capture.png
seb@abracadabra:~$

lspci



00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
02:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
seb@abracadabra:~$
 



Par avance merci pour tout smile

Vigen.

Edit: Je ne sais pas comment j'ai fait mon affaire, mais mon post est dans la partie réseau...Si une ame charitable pouvais le mettre au bon endroit !!! big_smile

Dernière modification par vigen (12-11-2015 07:05:37)

Hors ligne

#2 12-11-2015 07:51:00

sogal
Black Metal Modo
Lieu : Nord Isère
Distrib. : openSUSE Leap 42.3
Noyau : Linux 4.4.76
(G)UI : GNOME
Inscription : 09-05-2013
Site Web

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Déplacé dans la section Mate.
Vu comme ça, tu sembles avoir les paquets requis. Je suppose que tu obtiens le même soucis avec uniquement des pilotes libres ?
Il faudrait que tu puisses récupérer des logs, via dmesg par exemple, au moment du freeze pour avoir une idée plus précise du problème.

1485418338.png Hello IT ! Have you tried turning it off and on again ?

Hors ligne

#3 12-11-2015 08:08:43

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Bonjour Sogal smile

Oui effectivement, avec les pilotes libres, c'est meme pire, les freeze sont plus rapprochés.

Merci d'avoir déplacé le sujet, vu que je me suis pas encore couché, je suis un tantinet décalé dans mes horaires !!! big_smile

[    2.276461] ehci-pci: EHCI PCI platform driver
[    2.276638] QUIRK: Enable AMD PLL fix
[    2.276664] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.276674] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.276684] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.276694] ehci-pci 0000:00:12.2: debug port 1
[    2.276737] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[    2.276739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.277240] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.277443] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    2.277726] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000010000, 14:da:e9:1b:72:ae, XID 0c900800 IRQ 43
[    2.277729] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.277912] libata version 3.00 loaded.
[    2.289553] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.289605] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.289607] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.289609] usb usb1: Product: EHCI Host Controller
[    2.289611] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.289612] usb usb1: SerialNumber: 0000:00:12.2
[    2.289755] hub 1-0:1.0: USB hub found
[    2.289763] hub 1-0:1.0: 5 ports detected
[    2.289917] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.289926] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    2.299574] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.299579] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[    2.299583] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[    2.299587] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[    2.299591] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[    2.299595] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[    2.299599] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[    2.299706] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.299708] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.299710] usb usb2: Product: xHCI Host Controller
[    2.299711] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.299713] usb usb2: SerialNumber: 0000:02:00.0
[    2.299851] hub 2-0:1.0: USB hub found
[    2.299859] hub 2-0:1.0: 2 ports detected
[    2.299960] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.299963] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    2.299977] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.300005] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    2.300007] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.300008] usb usb3: Product: xHCI Host Controller
[    2.300010] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.300011] usb usb3: SerialNumber: 0000:02:00.0
[    2.300125] hub 3-0:1.0: USB hub found
[    2.300133] hub 3-0:1.0: 2 ports detected
[    2.300234] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    2.300240] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.300252] ehci-pci 0000:00:13.2: debug port 1
[    2.300293] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe9ff400
[    2.309595] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.309701] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.309706] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.309710] usb usb4: Product: EHCI Host Controller
[    2.309714] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.309717] usb usb4: SerialNumber: 0000:00:13.2
[    2.310006] hub 4-0:1.0: USB hub found
[    2.310021] hub 4-0:1.0: 5 ports detected
[    2.310603] ehci-pci 0000:00:16.2: EHCI Host Controller
[    2.310614] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[    2.310624] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.310637] ehci-pci 0000:00:16.2: debug port 1
[    2.310679] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe9ff000
[    2.321567] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.321657] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.321662] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.321666] usb usb5: Product: EHCI Host Controller
[    2.321670] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.321673] usb usb5: SerialNumber: 0000:00:16.2
[    2.321953] hub 5-0:1.0: USB hub found
[    2.321967] hub 5-0:1.0: 4 ports detected
[    2.322283] ahci 0000:00:11.0: version 3.0
[    2.322732] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    2.322745] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    2.322888] ohci-pci: OHCI PCI platform driver
[    2.324813] scsi0 : ahci
[    2.325045] scsi1 : ahci
[    2.325225] scsi2 : ahci
[    2.325370] scsi3 : ahci
[    2.325532] scsi4 : ahci
[    2.325683] scsi5 : ahci
[    2.325761] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 19
[    2.325765] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 19
[    2.325768] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 19
[    2.325770] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 19
[    2.325773] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 19
[    2.325776] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 19
[    2.325965] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.325975] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[    2.326009] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe9fe000
[    2.385643] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.385649] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.385653] usb usb6: Product: OHCI PCI host controller
[    2.385657] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.385661] usb usb6: SerialNumber: 0000:00:12.0
[    2.385954] hub 6-0:1.0: USB hub found
[    2.385969] hub 6-0:1.0: 5 ports detected
[    2.386505] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.386516] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[    2.386551] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fd000
[    2.445661] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.445666] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.445670] usb usb7: Product: OHCI PCI host controller
[    2.445674] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.445677] usb usb7: SerialNumber: 0000:00:13.0
[    2.445953] hub 7-0:1.0: USB hub found
[    2.445968] hub 7-0:1.0: 5 ports detected
[    2.446507] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.446520] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[    2.446551] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fc000
[    2.505669] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.505674] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.505678] usb usb8: Product: OHCI PCI host controller
[    2.505682] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.505685] usb usb8: SerialNumber: 0000:00:14.5
[    2.505958] hub 8-0:1.0: USB hub found
[    2.505972] hub 8-0:1.0: 2 ports detected
[    2.506402] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    2.506412] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[    2.506448] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe9f3000
[    2.565740] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    2.565746] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.565750] usb usb9: Product: OHCI PCI host controller
[    2.565754] usb usb9: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.565757] usb usb9: SerialNumber: 0000:00:16.0
[    2.566041] hub 9-0:1.0: USB hub found
[    2.566056] hub 9-0:1.0: 4 ports detected
[    2.645693] ata4: SATA link down (SStatus 0 SControl 300)
[    2.645729] ata6: SATA link down (SStatus 0 SControl 300)
[    2.817703] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.817734] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.817766] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.817795] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.818020] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
[    2.818027] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.818216] ata3.00: ATA-8: WDC WD5000AZRX-00L4HB0, 01.01A01, max UDMA/133
[    2.818222] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.818326] ata2.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[    2.818387] ata1.00: configured for UDMA/133
[    2.818598] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW12 0362 PQ: 0 ANSI: 5
[    2.818759] ata3.00: configured for UDMA/133
[    2.819115] ata2.00: configured for UDMA/100
[    2.819662] ata5.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[    2.819668] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.820047] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB00 PQ: 0 ANSI: 5
[    2.821250] ata5.00: configured for UDMA/133
[    2.826419] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AZRX-0 1A01 PQ: 0 ANSI: 5
[    2.826870] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[    2.833263] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    2.833502] sd 0:0:0:0: [sda] Write Protect is off
[    2.833510] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.833574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.834611]  sda: sda1 sda2 sda3
[    2.835377] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.839903] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.839910] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.840274] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.840611] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.840620] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    2.840739] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.840747] sd 2:0:0:0: [sdb] Write Protect is off
[    2.840754] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.840823] sd 4:0:0:0: [sdc] Write Protect is off
[    2.840829] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.840835] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.840868] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.841992] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.842117] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.842229] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.842330] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.860479]  sdc: sdc1
[    2.861085] sd 4:0:0:0: [sdc] Attached SCSI disk
[    3.045791] usb 4-2: new high-speed USB device number 3 using ehci-pci
[    3.178687] usb 4-2: New USB device found, idVendor=18a5, idProduct=022b
[    3.178694] usb 4-2: New USB device strings: Mfr=10, Product=11, SerialNumber=12
[    3.178700] usb 4-2: Product: Portable USB Drive
[    3.178704] usb 4-2: Manufacturer: Verbatim
[    3.178707] usb 4-2: SerialNumber: 295016253725
[    3.181897] usb-storage 4-2:1.0: USB Mass Storage device detected
[    3.182087] scsi6 : usb-storage 4-2:1.0
[    3.182248] usbcore: registered new interface driver usb-storage
[    3.217799] tsc: Refined TSC clocksource calibration: 3314.813 MHz
[    3.289850] usb 4-3: new high-speed USB device number 4 using ehci-pci
[    3.300555]  sdb: sdb1
[    3.301144] sd 2:0:0:0: [sdb] Attached SCSI disk
[    3.427603] usb 4-3: New USB device found, idVendor=8564, idProduct=1000
[    3.427610] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.427615] usb 4-3: Product: Mass Storage Device
[    3.427619] usb 4-3: Manufacturer: JetFlash
[    3.427623] usb 4-3: SerialNumber: 23F27Z99VKQZ7KRQ
[    3.428101] usb-storage 4-3:1.0: USB Mass Storage device detected
[    3.428286] scsi7 : usb-storage 4-3:1.0
[    3.516963] PM: Starting manual resume from disk
[    3.516971] PM: Hibernation image partition 8:1 present
[    3.516975] PM: Looking for hibernation image.
[    3.517296] PM: Image not found (code -22)
[    3.517301] PM: Hibernation image not present or could not be loaded.
[    3.575956] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.689919] usb 7-1: new full-speed USB device number 2 using ohci-pci
[    3.818928] lp: driver loaded but no devices found
[    3.820491] ppdev: user-space parallel port driver
[    3.822417] parport_pc 00:02: reported by Plug and Play ACPI
[    3.822462] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.838518] systemd-udevd[218]: starting version 215
[    3.857002] usb 7-1: New USB device found, idVendor=1532, idProduct=0103
[    3.857005] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.857008] usb 7-1: Product: Razer Reclusa
[    3.857010] usb 7-1: Manufacturer: Chicony
[    3.863020] hub 7-1:1.0: USB hub found
[    3.864988] hub 7-1:1.0: 3 ports detected
[    3.918112] lp0: using parport0 (interrupt-driven).
[    3.923357] ACPI: acpi_idle registered with cpuidle
[    3.927202] wmi: Mapper loaded
[    3.927487] fuse init (API version 7.23)
[    3.927760] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.927765] ACPI: Power Button [PWRB]
[    3.927826] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.927829] ACPI: Power Button [PWRF]
[    3.930351] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.941066] ATK0110 ATK0110:00: EC enabled
[    3.960535] random: nonblocking pool is initialized
[    3.964554] EDAC MC: Ver: 3.0.0
[    3.967500] MCE: In-kernel MCE decoding enabled.
[    3.969563] AMD64 EDAC driver v3.4.0
[    3.969597] EDAC amd64: DRAM ECC disabled.
[    3.969606] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    3.972957] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    3.976165] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
[    3.976172] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b2f (\_SB_.PCI0.SBRG.ASOC.SMRG) (20140424/utaddress-258)
[    3.976176] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.978840] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    3.979065] snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[    3.979289] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    3.979362] sp5100_tco: PCI Revision ID: 0x42
[    3.979388] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    3.979399] sp5100_tco: Last reboot was not triggered by watchdog.
[    3.979454] sp5100_tco: initialized (0xffffc90000c78b00). heartbeat=60 sec (nowayout=0)
[    3.982449] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.988592] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
[    4.003546] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    4.003551] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.003555] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.003556] sound hdaudioC0D0:    mono: mono_out=0x0
[    4.003558] sound hdaudioC0D0:    dig-out=0x11/0x1e
[    4.003560] sound hdaudioC0D0:    inputs:
[    4.003562] sound hdaudioC0D0:      Front Mic=0x19
[    4.003565] sound hdaudioC0D0:      Rear Mic=0x18
[    4.003567] sound hdaudioC0D0:      Line=0x1a
[    4.014007] usb 6-5: new low-speed USB device number 2 using ohci-pci
[    4.020854] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    4.020953] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    4.021614] AVX version of gcm_enc/dec engaged.
[    4.022730] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    4.022865] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    4.023013] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    4.023216] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    4.023355] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    4.023446] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    4.025877] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    4.043633] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    4.043636] Disabling lock debugging due to kernel taint
[    4.050783] alg: No test for crc32 (crc32-pclmul)
[    4.062746] kvm: Nested Virtualization enabled
[    4.062752] kvm: Nested Paging enabled
[    4.066305] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7754 MBytes.
[    4.066546] <6>[fglrx]   vendor: 1002 device: 68f9 count: 1
[    4.067125] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[    4.067590] <6>[fglrx] Kernel PAT support is enabled
[    4.067609] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep  2 2014] with 1 minors
[    4.113297] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.119685] Adding 1998844k swap on /dev/sda1.  Priority:-1 extents:1 across:1998844k SSFS
[    4.127728] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    4.174306] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.181084] usb 6-5: New USB device found, idVendor=046d, idProduct=c05b
[    4.181089] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.181091] usb 6-5: Product: USB Optical Mouse
[    4.181094] usb 6-5: Manufacturer: Logitech
[    4.182559] systemd-journald[209]: Received request to flush runtime journal from PID 1
[    4.182850] scsi 6:0:0:0: Direct-Access     ST950032 5AS              0002 PQ: 0 ANSI: 2 CCS
[    4.184849] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    4.187699] sd 6:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    4.188689] sd 6:0:0:0: [sdd] Write Protect is off
[    4.188693] sd 6:0:0:0: [sdd] Mode Sense: 28 00 00 00
[    4.189686] sd 6:0:0:0: [sdd] No Caching mode page found
[    4.189721] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    4.212568] hidraw: raw HID events driver (C) Jiri Kosina
[    4.218110] Switched to clocksource tsc
[    4.219265] usbcore: registered new interface driver usbhid
[    4.219267] usbhid: USB HID core driver
[    4.220645] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/0003:046D:C05B.0001/input/input15
[    4.220799] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-5/input0
[    4.254585]  sdd: sdd1
[    4.257943] sd 6:0:0:0: [sdd] Attached SCSI disk
[    4.308921] RPC: Registered named UNIX socket transport module.
[    4.308923] RPC: Registered udp transport module.
[    4.308925] RPC: Registered tcp transport module.
[    4.308926] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.312207] FS-Cache: Loaded
[    4.319757] FS-Cache: Netfs 'nfs' registered for caching
[    4.328670] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.383127] usb 7-1.3: new full-speed USB device number 3 using ohci-pci
[    4.493154] usb 7-1.3: New USB device found, idVendor=1532, idProduct=0200
[    4.493159] usb 7-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.493162] usb 7-1.3: Product: Reclusa Keyboard
[    4.493164] usb 7-1.3: Manufacturer: Razer
[    4.497759] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[    4.499565] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.3/7-1.3:1.0/0003:1532:0200.0002/input/input16
[    4.502231] hid-generic 0003:1532:0200.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Reclusa Keyboard] on usb-0000:00:13.0-1.3/input0
[    4.508260] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.3/7-1.3:1.1/0003:1532:0200.0003/input/input17
[    4.508543] hid-generic 0003:1532:0200.0003: input,hidraw2: USB HID v1.10 Device [Razer Reclusa Keyboard] on usb-0000:00:13.0-1.3/input1
[    4.511906] vboxdrv: Found 6 processor cores
[    4.530319] vboxdrv: TSC mode is Invariant, tentative frequency 3314813824 Hz
[    4.530322] vboxdrv: Successfully loaded version 5.0.10 (interface 0x00240000)
[    4.542946] cfg80211: Calling CRDA to update world regulatory domain
[    4.578766] cfg80211: World regulatory domain updated:
[    4.578769] cfg80211:  DFS Master region: unset
[    4.578771] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.578773] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.578775] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.578776] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.578778] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.578780] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.578781] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.578783] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.578784] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.607147] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[    4.720311] r8169 0000:03:00.0 eth0: link down
[    4.720327] r8169 0000:03:00.0 eth0: link down
[    4.720375] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.742548] VBoxNetFlt: Successfully started.
[    4.745270] VBoxNetAdp: Successfully started.
[    4.747216] VBoxPciLinuxInit
[    4.748848] vboxpci: IOMMU not found (not registered)
[    4.816239] fglrx_pci 0000:01:00.0: irq 52 for MSI/MSI-X
[    4.817202] <6>[fglrx] Firegl kernel thread PID: 1243
[    4.817281] <6>[fglrx] Firegl kernel thread PID: 1244
[    4.817358] <6>[fglrx] Firegl kernel thread PID: 1245
[    4.817455] <6>[fglrx] IRQ 52 Enabled
[    4.824343] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[    4.824346] <6>[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[    4.824347] <6>[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[    4.824349] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[    5.024761] scsi 7:0:0:0: Direct-Access     JetFlash Transcend 8GB    1100 PQ: 0 ANSI: 4
[    5.025102] sd 7:0:0:0: Attached scsi generic sg5 type 0
[    5.026849] sd 7:0:0:0: [sde] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[    5.028155] sd 7:0:0:0: [sde] Write Protect is off
[    5.028159] sd 7:0:0:0: [sde] Mode Sense: 43 00 00 00
[    5.028905] sd 7:0:0:0: [sde] No Caching mode page found
[    5.028908] sd 7:0:0:0: [sde] Assuming drive cache: write through
[    5.033244]  sde: sde1
[    5.036038] sd 7:0:0:0: [sde] Attached SCSI removable disk
[    6.660444] r8169 0000:03:00.0 eth0: link up
[    6.660452] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.068045] FAT-fs (sde1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    8.071724] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    8.087158] FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.128066] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    8.294837] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.299976] Netfilter messages via NETLINK v0.30.
[    8.301021] ctnetlink v0.93: registering with nfnetlink.
[    8.315435] ip_tables: (C) 2000-2006 Netfilter Core Team
[   21.372865] usb 4-2: USB disconnect, device number 3
[   23.179837] usb 4-3: USB disconnect, device number 4
[   51.475102] usb 4-3: new high-speed USB device number 5 using ehci-pci
[   51.696109] usb 4-3: New USB device found, idVendor=058f, idProduct=6387
[   51.696112] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   51.696113] usb 4-3: Product: Mass Storage
[   51.696115] usb 4-3: Manufacturer: Generic
[   51.696116] usb 4-3: SerialNumber: 50AB9819
[   51.696496] usb-storage 4-3:1.0: USB Mass Storage device detected
[   51.696597] scsi8 : usb-storage 4-3:1.0
[   52.697731] scsi 8:0:0:0: Direct-Access     Generic  Flash Disk       8.07 PQ: 0 ANSI: 2
[   52.698015] sd 8:0:0:0: Attached scsi generic sg4 type 0
[   52.702170] sd 8:0:0:0: [sdd] 2048000 512-byte logical blocks: (1.04 GB/1000 MiB)
[   52.702788] sd 8:0:0:0: [sdd] Write Protect is off
[   52.702791] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[   52.703419] sd 8:0:0:0: [sdd] No Caching mode page found
[   52.703422] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[   53.204063]  sdd:
[   53.206614] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[   53.428168] FAT-fs (sdd): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  653.260542] usb 4-3: USB disconnect, device number 5
[  676.272097] usb 4-3: new high-speed USB device number 6 using ehci-pci
[  676.407219] usb 4-3: New USB device found, idVendor=8564, idProduct=1000
[  676.407222] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  676.407224] usb 4-3: Product: Mass Storage Device
[  676.407225] usb 4-3: Manufacturer: JetFlash
[  676.407226] usb 4-3: SerialNumber: 78CAS4MK3MV7VX6Y
[  676.407506] usb-storage 4-3:1.0: USB Mass Storage device detected
[  676.407609] scsi9 : usb-storage 4-3:1.0
[  677.950591] scsi 9:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 4
[  677.950912] sd 9:0:0:0: Attached scsi generic sg4 type 0
[  677.952302] sd 9:0:0:0: [sdd] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB)
[  677.954486] sd 9:0:0:0: [sdd] Write Protect is off
[  677.954490] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00
[  677.955919] sd 9:0:0:0: [sdd] No Caching mode page found
[  677.955923] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[  677.960758]  sdd: sdd1
[  677.964920] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[  678.168349] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  832.399803] usb 4-3: USB disconnect, device number 6
root@abracadabra:/home/seb#
 



Pas mal de messages d'erreur non?

Hors ligne

#4 12-11-2015 08:21:01

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Bonjour
@sogal
une petite précision , quel est le pilote libre ati ?
je te demande cela parce que comme le firmware est obligatoire et non free j ai toujours pensé qu ati n avait pas de driver libre comme nvidia avec "nouveau"
mais je me trompe peut etre. neutral

@vigen
a tu essayé de nettoyer les fglrx , a priori tu a 2 drivers ati et radeon (ati est celui par défaut avec le firmware non-free ) et radeon qui est le driver qui doit etre utilisé actuellement.
comme il est de grande chance que ce soit le fglrx qui pose probleme.

par contre je vois pas le rapport entre le changement de bureau et le freeze . si tu peu rester sur l invite de logging du bureau pour nous dire si au bout d un moment ça freeze aussi.
je sais pas si toujour d actualité , mais gnome + ati + fglrx pose probleme sur jessie (ceci a l époque de jessie testing )

ta machine est un portable il me semble ?
si la console ne te fait pas peur tongue je purgerai tout (serveur X) meme le firmware et je reprendrai de zero.
(peut etre un autoremove pour purger les paquets obsolets)
ne pas oublier d effacer le fichier /etc/X11/xorg.conf (utilisé par fglrx )
=> remettre
- le firmware qui a mon avis est obligatoire
tenter un reboot et test
- puis le xserver-xorg-video-ati
idem reboot
a priori a part ce probleme d arret (lent) avant tu n avait pas de soucis de serveur X
c'est fort de choco cette affaire smile

#5 12-11-2015 08:30:56

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Bonjour anonyme smile

Raté c'est un desktop smile

J'ai installé le fglrx suite aux soucis de freeze justement wink

Sous LXDE, pas de soucis en utilisation "classique", sauf certaine fois, le pc ne "s'éteignait" pas...C'est pour cela que je privilégie une piste hardware....

C'est pour cela que je faisais le lien entre changement de De et Freeze, car sous lxde rien, et dès que j'ai tenter Gnome, patatra.

Hors ligne

#6 12-11-2015 08:42:06

sogal
Black Metal Modo
Lieu : Nord Isère
Distrib. : openSUSE Leap 42.3
Noyau : Linux 4.4.76
(G)UI : GNOME
Inscription : 09-05-2013
Site Web

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

anonyme a écrit :

Bonjour
@sogal
une petite précision , quel est le pilote libre ati ?
je te demande cela parce que comme le firmware est obligatoire et non free j ai toujours pensé qu ati n avait pas de driver libre comme nvidia avec "nouveau"
mais je me trompe peut etre. neutral


https://packages.debian.org/jessie/xser … deo-radeon
Le pilote Xorg AMD/ATI Radeon tout simplement wink


1485418338.png Hello IT ! Have you tried turning it off and on again ?

Hors ligne

#7 12-11-2015 08:52:56

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Je viens d'avoir un ami au tel, il va me preter une cm et un processeur amd, comme cela je vais voir si l'erreur ne viens pas d'un autre périphérique (suis pas pret de dormir lol).

Débian supporte "correctement", les processeurs avec chip graphique intégré?

Hors ligne

#8 12-11-2015 08:58:13

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

ce genre de probleme est casse pied.
je dirai qu actuellement tu a 2 soucis l arret et le freeze et qu ils n ont pas la meme cause.
avec mate je te conseille au retour du firmware et ati (et supprimer le fglrx)
pour l arret c est plus compliqué , en derniere phase le systeme donne par l intermediaire de la carte mere un ordre d arret a l alimentation , entre temp il y a l arret de tous les processus. (et demon de tout genre smile )
desactiver l acpi par exemple (dans le bios) a pour effet de ne plus arreter l alimentation il faut un apui sur le bouton (marche/arret) en fin du cycle d arret de l os pour couper l alimentation.
ce qui etait le cas avec win3.11 et nt4 a la grande epoque  wink
pour la procedure d arret coté logiciel et la raison du blocage je sais pas quoi te dire , peut etre un souci materiel comme tu dis hmm
ps: pour l acpi tu peus diminuer le niveau (s1 a s5 il me semble ) s1 devrai suffire pour test
dans les options du bios desactiver tout ce qui touche a l energie (c est l os qui gere (ici debian) )
selon le bios juste garder "acpi enabled" et "level s1" par exemple (il y a aucun bios identique dur de conseiller )

#9 12-11-2015 09:03:42

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

un freeze "tout chaud"

[    0.782855] TCP: reno registered
[    0.782868] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.782908] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.783020] NET: Registered protocol family 1
[    1.866031] pci 0000:01:00.0: Video device with shadowed ROM
[    1.866364] PCI: CLS 64 bytes, default 64
[    1.866462] Unpacking initramfs...
[    2.174538] Freeing initrd memory: 15304K (ffff88003620c000 - ffff8800370fe000)
[    2.174829] PCI-DMA: Disabling AGP.
[    2.174906] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    2.174907] PCI-DMA: using GART IOMMU.
[    2.174910] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    2.179812] perf: AMD NB counters detected
[    2.179874] microcode: CPU0: patch_level=0x06000629
[    2.179882] microcode: CPU1: patch_level=0x06000629
[    2.179893] microcode: CPU2: patch_level=0x06000629
[    2.179902] microcode: CPU3: patch_level=0x06000629
[    2.179912] microcode: CPU4: patch_level=0x06000629
[    2.179922] microcode: CPU5: patch_level=0x06000629
[    2.179987] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.179992] LVT offset 0 assigned for vector 0x400
[    2.180008] perf: AMD IBS detected (0x000000ff)
[    2.180397] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    2.180442] audit: initializing netlink subsys (disabled)
[    2.180458] audit: type=2000 audit(1447315201.880:1): initialized
[    2.180803] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.180825] zbud: loaded
[    2.181049] VFS: Disk quotas dquot_6.5.2
[    2.181070] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.181128] msgmni has been set to 15969
[    2.181506] alg: No test for stdrng (krng)
[    2.181540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.181602] io scheduler noop registered
[    2.181605] io scheduler deadline registered
[    2.181653] io scheduler cfq registered (default)
[    2.181856] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    2.181930] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[    2.182088] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[    2.182179] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[    2.182181] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    2.182183] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    2.182186] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[    2.182200] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[    2.182202] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    2.182204] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[    2.182220] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[    2.182221] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.182224] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[    2.182241] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.182261] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.182309] GHES: HEST is not enabled!
[    2.182389] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.202771] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.203225] Linux agpgart interface v0.103
[    2.203345] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.203712] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.203719] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.203894] mousedev: PS/2 mouse device common for all mice
[    2.203935] rtc_cmos 00:01: RTC can wake from S4
[    2.204065] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.204090] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.204116] ledtrig-cpu: registered to indicate activity on CPUs
[    2.204710] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.204711] AMD IOMMUv2 functionality not available on this system
[    2.204796] TCP: cubic registered
[    2.204883] NET: Registered protocol family 10
[    2.205097] mip6: Mobile IPv6
[    2.205100] NET: Registered protocol family 17
[    2.205106] mpls_gso: MPLS GSO support
[    2.205598] registered taskstats version 1
[    2.206012] rtc_cmos 00:01: setting system clock to 2015-11-12 08:00:03 UTC (1447315203)
[    2.206063] PM: Hibernation image not present or could not be loaded.
[    2.206929] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    2.206930] Write protecting the kernel read-only data: 8192k
[    2.210096] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[    2.210826] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.220572] systemd-udevd[84]: starting version 215
[    2.220892] random: systemd-udevd urandom read with 2 bits of entropy available
[    2.233863] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.234099] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    2.234371] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000000c000, 14:da:e9:1b:72:ae, XID 0c900800 IRQ 43
[    2.234374] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.235225] ACPI: bus type USB registered
[    2.235286] usbcore: registered new interface driver usbfs
[    2.235307] usbcore: registered new interface driver hub
[    2.235453] SCSI subsystem initialized
[    2.235607] usbcore: registered new device driver usb
[    2.236823] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.237348] QUIRK: Enable AMD PLL fix
[    2.237365] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.237372] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    2.237391] ehci-pci: EHCI PCI platform driver
[    2.237494] libata version 3.00 loaded.
[    2.237580] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.247035] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.247041] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[    2.247047] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[    2.247052] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[    2.247058] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[    2.247063] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[    2.247069] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[    2.247212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.247215] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.247218] usb usb1: Product: xHCI Host Controller
[    2.247220] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.247222] usb usb1: SerialNumber: 0000:02:00.0
[    2.247457] hub 1-0:1.0: USB hub found
[    2.247470] hub 1-0:1.0: 2 ports detected
[    2.247624] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.247629] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    2.247672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.247675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.247677] usb usb2: Product: xHCI Host Controller
[    2.247679] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    2.247681] usb usb2: SerialNumber: 0000:02:00.0
[    2.247776] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.247868] hub 2-0:1.0: USB hub found
[    2.247877] hub 2-0:1.0: 2 ports detected
[    2.248066] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[    2.248073] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.248085] ehci-pci 0000:00:12.2: debug port 1
[    2.248134] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[    2.257631] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.257829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.257835] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.257839] usb usb3: Product: EHCI Host Controller
[    2.257842] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.257845] usb usb3: SerialNumber: 0000:00:12.2
[    2.258120] hub 3-0:1.0: USB hub found
[    2.258149] hub 3-0:1.0: 5 ports detected
[    2.258835] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.258849] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    2.258859] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.258873] ehci-pci 0000:00:13.2: debug port 1
[    2.258913] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe9ff400
[    2.269552] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.269658] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.269663] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.269667] usb usb4: Product: EHCI Host Controller
[    2.269671] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.269674] usb usb4: SerialNumber: 0000:00:13.2
[    2.269951] hub 4-0:1.0: USB hub found
[    2.269965] hub 4-0:1.0: 5 ports detected
[    2.270531] ehci-pci 0000:00:16.2: EHCI Host Controller
[    2.270542] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[    2.270551] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.270564] ehci-pci 0000:00:16.2: debug port 1
[    2.270604] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe9ff000
[    2.281534] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.281626] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    2.281631] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.281635] usb usb5: Product: EHCI Host Controller
[    2.281638] usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.281642] usb usb5: SerialNumber: 0000:00:16.2
[    2.281928] hub 5-0:1.0: USB hub found
[    2.281943] hub 5-0:1.0: 4 ports detected
[    2.282263] ahci 0000:00:11.0: version 3.0
[    2.282707] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    2.282716] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    2.283468] ohci-pci: OHCI PCI platform driver
[    2.285647] scsi0 : ahci
[    2.285837] scsi1 : ahci
[    2.285991] scsi2 : ahci
[    2.286139] scsi3 : ahci
[    2.286284] scsi4 : ahci
[    2.286430] scsi5 : ahci
[    2.286505] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 19
[    2.286508] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 19
[    2.286511] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 19
[    2.286514] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 19
[    2.286517] ata5: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff00 irq 19
[    2.286519] ata6: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9fff80 irq 19
[    2.286687] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.286696] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[    2.286728] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe9fe000
[    2.345617] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.345623] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.345627] usb usb6: Product: OHCI PCI host controller
[    2.345631] usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.345634] usb usb6: SerialNumber: 0000:00:12.0
[    2.345915] hub 6-0:1.0: USB hub found
[    2.345931] hub 6-0:1.0: 5 ports detected
[    2.346479] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.346491] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[    2.346522] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fd000
[    2.405621] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.405626] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.405630] usb usb7: Product: OHCI PCI host controller
[    2.405634] usb usb7: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.405637] usb usb7: SerialNumber: 0000:00:13.0
[    2.405918] hub 7-0:1.0: USB hub found
[    2.405935] hub 7-0:1.0: 5 ports detected
[    2.406478] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.406489] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[    2.406524] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fc000
[    2.465627] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.465632] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.465636] usb usb8: Product: OHCI PCI host controller
[    2.465640] usb usb8: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.465643] usb usb8: SerialNumber: 0000:00:14.5
[    2.465925] hub 8-0:1.0: USB hub found
[    2.465941] hub 8-0:1.0: 2 ports detected
[    2.466377] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    2.466387] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[    2.466418] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe9f3000
[    2.525656] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[    2.525662] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.525666] usb usb9: Product: OHCI PCI host controller
[    2.525670] usb usb9: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.525674] usb usb9: SerialNumber: 0000:00:16.0
[    2.525952] hub 9-0:1.0: USB hub found
[    2.525968] hub 9-0:1.0: 4 ports detected
[    2.605625] ata4: SATA link down (SStatus 0 SControl 300)
[    2.605679] ata6: SATA link down (SStatus 0 SControl 300)
[    2.777670] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.777700] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.777728] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.777759] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.778004] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10362, max UDMA/133
[    2.778009] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.778246] ata3.00: ATA-8: WDC WD5000AZRX-00L4HB0, 01.01A01, max UDMA/133
[    2.778252] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.778276] ata2.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[    2.778375] ata1.00: configured for UDMA/133
[    2.778607] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW12 0362 PQ: 0 ANSI: 5
[    2.778768] ata3.00: configured for UDMA/133
[    2.779060] ata2.00: configured for UDMA/100
[    2.780009] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB00 PQ: 0 ANSI: 5
[    2.780226] ata5.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[    2.780235] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.781838] ata5.00: configured for UDMA/133
[    2.786395] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AZRX-0 1A01 PQ: 0 ANSI: 5
[    2.786943] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[    2.793355] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    2.793559] sd 0:0:0:0: [sda] Write Protect is off
[    2.793566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.793601] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.794525]  sda: sda1 sda2 sda3
[    2.795165] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.799879] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.799885] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.800228] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.800480] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.800488] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    2.800587] sd 2:0:0:0: [sdb] Write Protect is off
[    2.800595] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.800640] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.800667] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.800764] sd 4:0:0:0: [sdc] Write Protect is off
[    2.800771] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.800815] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.801466] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.801653] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.801761] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.801883] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.824353]  sdc: sdc1
[    2.824796] sd 4:0:0:0: [sdc] Attached SCSI disk
[    3.165780] usb 7-1: new full-speed USB device number 2 using ohci-pci
[    3.177754] tsc: Refined TSC clocksource calibration: 3314.813 MHz
[    3.261341]  sdb: sdb1
[    3.261813] sd 2:0:0:0: [sdb] Attached SCSI disk
[    3.332867] usb 7-1: New USB device found, idVendor=1532, idProduct=0103
[    3.332875] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.332880] usb 7-1: Product: Razer Reclusa
[    3.332884] usb 7-1: Manufacturer: Chicony
[    3.338910] hub 7-1:1.0: USB hub found
[    3.340870] hub 7-1:1.0: 3 ports detected
[    3.477856] PM: Starting manual resume from disk
[    3.477864] PM: Hibernation image partition 8:1 present
[    3.477867] PM: Looking for hibernation image.
[    3.478162] PM: Image not found (code -22)
[    3.478167] PM: Hibernation image not present or could not be loaded.
[    3.485851] usb 6-5: new low-speed USB device number 2 using ohci-pci
[    3.535908] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.656927] usb 6-5: New USB device found, idVendor=046d, idProduct=c05b
[    3.656931] usb 6-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.656934] usb 6-5: Product: USB Optical Mouse
[    3.656935] usb 6-5: Manufacturer: Logitech
[    3.779303] lp: driver loaded but no devices found
[    3.780909] ppdev: user-space parallel port driver
[    3.782902] parport_pc 00:02: reported by Plug and Play ACPI
[    3.782947] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.799187] systemd-udevd[213]: starting version 215
[    3.858976] usb 7-1.3: new full-speed USB device number 3 using ohci-pci
[    3.877926] ACPI: acpi_idle registered with cpuidle
[    3.881065] wmi: Mapper loaded
[    3.881727] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.881732] ACPI: Power Button [PWRB]
[    3.881793] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    3.881796] ACPI: Power Button [PWRF]
[    3.882031] lp0: using parport0 (interrupt-driven).
[    3.888497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.890069] fuse init (API version 7.23)
[    3.899417] ATK0110 ATK0110:00: EC enabled
[    3.910202] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
[    3.910210] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b2f (\_SB_.PCI0.SBRG.ASOC.SMRG) (20140424/utaddress-258)
[    3.910214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.913225] EDAC MC: Ver: 3.0.0
[    3.913806] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    3.913869] sp5100_tco: PCI Revision ID: 0x42
[    3.913902] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    3.913931] sp5100_tco: Last reboot was not triggered by watchdog.
[    3.914259] sp5100_tco: initialized (0xffffc90010e6cb00). heartbeat=60 sec (nowayout=0)
[    3.917166] random: nonblocking pool is initialized
[    3.917519] MCE: In-kernel MCE decoding enabled.
[    3.922219] AMD64 EDAC driver v3.4.0
[    3.922265] EDAC amd64: DRAM ECC disabled.
[    3.922273] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    3.925159] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    3.925603] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    3.925902] snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
[    3.938364] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
[    3.943992] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    3.943996] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.943999] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.944002] sound hdaudioC0D0:    mono: mono_out=0x0
[    3.944003] sound hdaudioC0D0:    dig-out=0x11/0x1e
[    3.944005] sound hdaudioC0D0:    inputs:
[    3.944008] sound hdaudioC0D0:      Front Mic=0x19
[    3.944010] sound hdaudioC0D0:      Rear Mic=0x18
[    3.944012] sound hdaudioC0D0:      Line=0x1a
[    3.955532] AVX version of gcm_enc/dec engaged.
[    3.958556] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    3.958759] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.965002] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    3.965156] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    3.965790] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    3.966697] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    3.966928] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    3.967178] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    3.967415] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    3.967502] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    3.969002] usb 7-1.3: New USB device found, idVendor=1532, idProduct=0200
[    3.969005] usb 7-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.969008] usb 7-1.3: Product: Reclusa Keyboard
[    3.969009] usb 7-1.3: Manufacturer: Razer
[    3.970158] alg: No test for crc32 (crc32-pclmul)
[    3.994469] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    3.994471] Disabling lock debugging due to kernel taint
[    4.001976] hidraw: raw HID events driver (C) Jiri Kosina
[    4.008309] kvm: Nested Virtualization enabled
[    4.008314] kvm: Nested Paging enabled
[    4.016193] usbcore: registered new interface driver usbhid
[    4.016196] usbhid: USB HID core driver
[    4.017971] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7754 MBytes.
[    4.018131] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/0003:046D:C05B.0001/input/input15
[    4.018235] <6>[fglrx]   vendor: 1002 device: 68f9 count: 1
[    4.018293] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-5/input0
[    4.018532] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.3/7-1.3:1.0/0003:1532:0200.0002/input/input16
[    4.018625] hid-generic 0003:1532:0200.0002: input,hidraw1: USB HID v1.10 Keyboard [Razer Reclusa Keyboard] on usb-0000:00:13.0-1.3/input0
[    4.018888] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100
[    4.019303] <6>[fglrx] Kernel PAT support is enabled
[    4.019326] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep  2 2014] with 1 minors
[    4.020117] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1.3/7-1.3:1.1/0003:1532:0200.0003/input/input17
[    4.020255] hid-generic 0003:1532:0200.0003: input,hidraw2: USB HID v1.10 Device [Razer Reclusa Keyboard] on usb-0000:00:13.0-1.3/input1
[    4.104679] Adding 1998844k swap on /dev/sda1.  Priority:-1 extents:1 across:1998844k SSFS
[    4.108239] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.116546] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    4.141914] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.149876] systemd-journald[208]: Received request to flush runtime journal from PID 1
[    4.178076] Switched to clocksource tsc
[    4.272096] RPC: Registered named UNIX socket transport module.
[    4.272099] RPC: Registered udp transport module.
[    4.272100] RPC: Registered tcp transport module.
[    4.272101] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.275419] FS-Cache: Loaded
[    4.282818] FS-Cache: Netfs 'nfs' registered for caching
[    4.291780] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.445499] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[    4.483645] vboxdrv: Found 6 processor cores
[    4.496786] cfg80211: Calling CRDA to update world regulatory domain
[    4.502227] vboxdrv: TSC mode is Invariant, tentative frequency 3314800052 Hz
[    4.502230] vboxdrv: Successfully loaded version 5.0.10 (interface 0x00240000)
[    4.544676] cfg80211: World regulatory domain updated:
[    4.544679] cfg80211:  DFS Master region: unset
[    4.544680] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.544683] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.544684] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.544686] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.544688] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.544690] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.544691] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.544692] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.544694] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.560804] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[    4.676239] r8169 0000:03:00.0 eth0: link down
[    4.676255] r8169 0000:03:00.0 eth0: link down
[    4.676295] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.710927] VBoxNetFlt: Successfully started.
[    4.713476] VBoxNetAdp: Successfully started.
[    4.715469] VBoxPciLinuxInit
[    4.717699] vboxpci: IOMMU not found (not registered)
[    4.774258] fglrx_pci 0000:01:00.0: irq 52 for MSI/MSI-X
[    4.775471] <6>[fglrx] Firegl kernel thread PID: 1200
[    4.775552] <6>[fglrx] Firegl kernel thread PID: 1201
[    4.775629] <6>[fglrx] Firegl kernel thread PID: 1202
[    4.775726] <6>[fglrx] IRQ 52 Enabled
[    4.782266] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[    4.782269] <6>[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[    4.782270] <6>[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[    4.782272] <6>[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[    6.621094] r8169 0000:03:00.0 eth0: link up
[    6.621102] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.298266] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.302574] Netfilter messages via NETLINK v0.30.
[    8.303708] ctnetlink v0.93: registering with nfnetlink.
[    8.323906] ip_tables: (C) 2000-2006 Netfilter Core Team
root@abracadabra:/home/seb#
 



@anonyme

Le soucis, c'est que si je remet le pilote libre, les freeze vont revenir a la chaine hmm

Hors ligne

#10 12-11-2015 09:07:09

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

vigen a écrit :

Je viens d'avoir un ami au tel, il va me preter une cm et un processeur amd, comme cela je vais voir si l'erreur ne viens pas d'un autre périphérique (suis pas pret de dormir lol).

Débian supporte "correctement", les processeurs avec chip graphique intégré?



oui jessie supporte ce type de processeur (pour intel c est sur ) amd personnellement je n en ai pas.
pour la veille video j ai eu quelques soucis avec la video integree sur un cpu en socket 1150.
en désactivant la veille video tu peu enlever ce soucis , et vérifier que l arret fonctionne bien de la machine.

#11 12-11-2015 09:10:44

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

ceci me plait smile


[    2.174907] PCI-DMA: using GART IOMMU.
 


tu a l option "IOMMU" dans ton bios ?
ne me demande pas a quoi ça sert tongue (voir internet) , il est question de 32 et 64 et sur toutes mes plateforme amd je l ai mit sur "enabled"

#12 12-11-2015 09:23:27

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

" "IOMMU""

Non, malheureusement, je n'ai pas....J'avais vu cette piste sur le web, et jeter un oeil, entre deux freeze ^^ Mais rien.
La cm que l'on va me preter, possède un uefi, pour l'installation de débian, c'est beaucoup plus complexe?

Merci pour la réponse concernant le processeur wink

Hors ligne

#13 12-11-2015 09:26:34

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

anonyme a écrit :

ceci me plait smile


[    2.174907] PCI-DMA: using GART IOMMU.
 


tu a l option "IOMMU" dans ton bios ?
ne me demande pas a quoi ça sert tongue (voir internet) , il est question de 32 et 64 et sur toutes mes plateforme amd je l ai mit sur "enabled"



https://www.kernel.org/doc/Documentatio … ptions.txt

Un rapport avec la mémoire?

IOMMU (input/output memory management unit)

 Currently four x86-64 PCI-DMA mapping implementations exist:

   1. <arch/x86_64/kernel/pci-nommu.c>: use no hardware/software IOMMU at all
      (e.g. because you have < 3 GB memory).
      Kernel boot message: "PCI-DMA: Disabling IOMMU"

   2. <arch/x86/kernel/amd_gart_64.c>: AMD GART based hardware IOMMU.
      Kernel boot message: "PCI-DMA: using GART IOMMU"

   3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used
      e.g. if there is no hardware IOMMU in the system and it is need because
      you have >3GB memory or told the kernel to us it (iommu=soft))
      Kernel boot message: "PCI-DMA: Using software bounce buffering
      for IO (SWIOTLB)"

   4. <arch/x86_64/pci-calgary.c> : IBM Calgary hardware IOMMU. Used in IBM
      pSeries and xSeries servers. This hardware IOMMU supports DMA address
      mapping with memory protection, etc.
      Kernel boot message: "PCI-DMA: Using Calgary IOMMU"

 iommu=[<size>][,noagp][,off][,force][,noforce][,leak[=<nr_of_leak_pages>]
  [,memaper[=<order>]][,merge][,forcesac][,fullflush][,nomerge]
  [,noaperture][,calgary]

  General iommu options:
    off                Don't initialize and use any kind of IOMMU.
    noforce            Don't force hardware IOMMU usage when it is not needed.
                       (default).
    force              Force the use of the hardware IOMMU even when it is
                       not actually needed (e.g. because < 3 GB memory).
    soft               Use software bounce buffering (SWIOTLB) (default for
                       Intel machines). This can be used to prevent the usage
                       of an available hardware IOMMU.

  iommu options only relevant to the AMD GART hardware IOMMU:
    <size>             Set the size of the remapping area in bytes.
    allowed            Overwrite iommu off workarounds for specific chipsets.
    fullflush          Flush IOMMU on each allocation (default).
    nofullflush        Don't use IOMMU fullflush.
    leak               Turn on simple iommu leak tracing (only when
                       CONFIG_IOMMU_LEAK is on). Default number of leak pages
                       is 20.
    memaper[=<order>]  Allocate an own aperture over RAM with size 32MB<<order.
                       (default: order=1, i.e. 64MB)
    merge              Do scatter-gather (SG) merging. Implies "force"
                       (experimental).
    nomerge            Don't do scatter-gather (SG) merging.
    noaperture         Ask the IOMMU not to touch the aperture for AGP.
    forcesac           Force single-address cycle (SAC) mode for masks <40bits
                       (experimental).
    noagp              Don't initialize the AGP driver and use full aperture.
    allowdac           Allow double-address cycle (DAC) mode, i.e. DMA >4GB.
                       DAC is used with 32-bit PCI to push a 64-bit address in
                       two cycles. When off all DMA over >4GB is forced through
                       an IOMMU or software bounce buffering.
    nodac              Forbid DAC mode, i.e. DMA >4GB.
    panic              Always panic when IOMMU overflows.
    calgary            Use the Calgary IOMMU if it is available

  iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
  implementation:
    swiotlb=<pages>[,force]
    <pages>            Prereserve that many 128K pages for the software IO
                       bounce buffering.
    force              Force all IO through the software TLB.

  Settings for the IBM Calgary hardware IOMMU currently found in IBM
  pSeries and xSeries machines:

    calgary=[64k,128k,256k,512k,1M,2M,4M,8M]
    calgary=[translate_empty_slots]
    calgary=[disable=<PCI bus number>]
    panic              Always panic when IOMMU overflows

    64k,...,8M - Set the size of each PCI slot's translation table
    when using the Calgary IOMMU. This is the size of the translation
    table itself in main memory. The smallest table, 64k, covers an IO
    space of 32MB; the largest, 8MB table, can cover an IO space of
    4GB. Normally the kernel will make the right choice by itself.

    translate_empty_slots - Enable translation even on slots that have
    no devices attached to them, in case a device will be hotplugged
    in the future.

    disable=<PCI bus number> - Disable translation on a given PHB. For
    example, the built-in graphics adapter resides on the first bridge
    (PCI bus number 0); if translation (isolation) is enabled on this
    bridge, X servers that access the hardware directly from user
    space might stop working. Use this option if you have devices that
    are accessed from userspace directly on some PCI host bridge.





Au cas ou :

root@abracadabra:/home/seb# dmesg | grep "PCI-DMA:"
[    2.174829] PCI-DMA: Disabling AGP.
[    2.174906] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    2.174907] PCI-DMA: using GART IOMMU.
[    2.174910] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
root@abracadabra:/home/seb#
 

Dernière modification par vigen (12-11-2015 09:29:38)

Hors ligne

#14 12-11-2015 09:31:20

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

sogal a écrit :

anonyme a écrit :

Bonjour
@sogal
une petite précision , quel est le pilote libre ati ?
je te demande cela parce que comme le firmware est obligatoire et non free j ai toujours pensé qu ati n avait pas de driver libre comme nvidia avec "nouveau"
mais je me trompe peut etre. neutral


https://packages.debian.org/jessie/xser … deo-radeon
Le pilote Xorg AMD/ATI Radeon tout simplement wink



je me permet de completter cette discution , n y voit pas une agression smile , juste pour nous enlever un doute wink

un lien => https://packages.debian.org/fr/jessie/f … ux-nonfree   (ceci est indispensable pour disons les gpu des 5 dernieres années )
ps: on laisse de coté le fglrx qui de toute maniere n est pas un driver libre .
l utilisation du pilote que tu precise ne fonctionnera pas sans ce firmware (pour des cartes de moins de 5 ans d age )
comme j ai abandonné l idée d utiliser une ati sur debian mon experience est plutot limité

c'est embetant c est du non-free wink

peut etre quelqu un peu nous dire (confirmer) que le firmware nonfree est obligatoire avec le driver libre ati
voila pourquoi je dis que nvidia a un driver 100% libre sur debian (pour les puristes du libre) et pas amd/ati

je sais pas si je suis clair dans mon explication tongue

#15 12-11-2015 09:40:23

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

vigen a écrit :

" "IOMMU""

Non, malheureusement, je n'ai pas....J'avais vu cette piste sur le web, et jeter un oeil, entre deux freeze ^^ Mais rien.
La cm que l'on va me preter, possède un uefi, pour l'installation de débian, c'est beaucoup plus complexe?



pour la petite histoire mes pc ont fonctionné sans l option "IOMMU activé" sans soucis (avant de m'en apercevoir sur les messages de syslog ) donc j écarte  ce probleme.

pour l uefi non pas plus complexe , pour l instant avec debian j ai zappé son utilisation.
mais sur le forum D_F il y a pas de souci tu aura les bonnes infos wink

#16 12-11-2015 14:30:29

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Bon, et bien, je viens de me taper une nouvelle installe sur hardware différent (full intel), seuls les hdd et l'alim sont les memes.

Exactement le meme résultats....Donc là, je suis rincer, j'ai quasi pas dormis depuis 24 heures....Donc, pour l'instant, Débian, je met de coté.

Merci encore a tous, pour votre aide et votre gentillesse !!! smile

Hors ligne

#17 12-11-2015 14:41:22

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

apres la sieste tu nous explique le souci avec le materiel intel , tu ne peu pas avoir 2 fois le meme probleme sad  , ou alors ton alimentation est hs avec des tensions anormales , mais comme je pense que tu est allez au bout de l installation c est pas correct non plus.

#18 12-11-2015 15:06:38

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

anonyme a écrit :

apres la sieste tu nous explique le souci avec le materiel intel , tu ne peu pas avoir 2 fois le meme probleme sad  , ou alors ton alimentation est hs avec des tensions anormales , mais comme je pense que tu est allez au bout de l installation c est pas correct non plus.




Après la sieste je retourne bossé big_smile

Non aucun soucis d'alim....D'ailleurs, là, je suis sous une autre distri qui "tourne" sans soucis....

Donc oui, au bout de l'installation effectivement, et les freezes ce passent dès que je touche au panel de Maté, enfin du moins c'est peut-etre une coincidence, mais bon.

Hors ligne

#19 12-11-2015 15:22:39

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

donne toujours le type de processeur intel que tu a testé , pour connaitre le type de gpu integré , comme tu l explique c est toujours un probleme de serveur x .
je suppose que tu n a pas put tester l arret tongue de la machine. (si correct par rapport a l amd )

Dernière modification par anonyme (12-11-2015 15:23:13)

#20 12-11-2015 15:43:44

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

anonyme a écrit :

donne toujours le type de processeur intel que tu a testé , pour connaitre le type de gpu integré , comme tu l explique c est toujours un probleme de serveur x .
je suppose que tu n a pas put tester l arret tongue de la machine. (si correct par rapport a l amd )




Intel(R) Celeron(R) CPU G1840 @ 2.80GHz smile

Concernant l'arret, le peu de fois que j'ai du redémarrer cela c'est fait sans heurts smile

Dernière modification par vigen (12-11-2015 15:44:44)

Hors ligne

#21 12-11-2015 16:19:28

sogal
Black Metal Modo
Lieu : Nord Isère
Distrib. : openSUSE Leap 42.3
Noyau : Linux 4.4.76
(G)UI : GNOME
Inscription : 09-05-2013
Site Web

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Salut, faudrait peut être voir également du côté des fichiers de configuration de l'utilisateur.
C'est toujours le même home que tu trimballes ? Peux-tu essayer de créer un nouvel utilisateur pour voir si ça se reproduit.

1485418338.png Hello IT ! Have you tried turning it off and on again ?

Hors ligne

#22 12-11-2015 16:26:06

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

sogal a écrit :

Salut, faudrait peut être voir également du côté des fichiers de configuration de l'utilisateur.
C'est toujours le même home que tu trimballes ? Peux-tu essayer de créer un nouvel utilisateur pour voir si ça se reproduit.



Non non, c'est un home différent a chaque fois, sur une partition préalablement formaté lors de l'installation. smile

Hors ligne

#23 12-11-2015 22:54:31

anonyme
Invité

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

voila la bete tongue  => http://ark.intel.com/fr/products/80800/ … e-2_80-GHz
j'ai pas connaissance de soucis sur les gpu intel intégré au cpu .
peut etre examiner le log du serveur X et le syslog , mais j'avoue tu n'a pas de chance sad

Dernière modification par anonyme (12-11-2015 22:55:21)

#24 13-11-2015 12:44:31

vigen
Membre
Lieu : Normandie
Distrib. : Debian Buster
Noyau : Linux 4.19
(G)UI : Mate
Inscription : 10-10-2015

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

Bonjour anonyme smile

Je suis d'accord avec toi, pas de chance sur ce coup là.

De plus, meme avec un hardware différent, du moins cpu et carte mère, j'ai exactement le meme soucis...Un problème avec le ssd Intel 320 séries? Les deux autres hdd sont des Western digital on ne peux plus classique.

J'ai essayer, depuis hier, avec ma grosse carence en sommeil big_smile

Ubuntu 14.04 lts aucun soucis.
Mint 17.2 LMDE (donc basé sur Débian) et la mint classic basé sur ubuntu, aucun soucis.
Opensuse leap 42.1 aucun soucis.

Donc je me pose réellement la question, d'un problème "hardware" de mon coté.

Hors ligne

#25 13-11-2015 12:59:45

Severian
Membre
Distrib. : Debian GNU/Linux 9.4 (stretch)
Noyau : Linux 4.14.0-0.bpo.3-amd64
(G)UI : Openbox 3.6.1-4
Inscription : 13-12-2014

Re : Freeze aléatoire du DE et impossibilité d'éteindre la machine .

si je comprends bien ton problème

tu installe debian sur ton ssd -> freeze
tu installe une autre distrib (LMDE, Mint ou Leap) sur ton ssd -> pas de soucis

et ce quelque soit la carte / processeur utilisé

c'est bien ça ?

Hors ligne

Pied de page des forums