logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 29-01-2016 21:25:41

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

[Resolu] Jessie plante en graphique

[EDIT] la solution est :
Avec Jessie 8  la puce graphique NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] [10de:03d6] (rev a2) est seulement supportée par le paquet nvidia-legacy-304xx-driver.[/EDIT]



Bonjour à tous. Paix et Amour pour chaque un. A défaut, tous mes voeux de patience.

Y316, le retour ...

Bon voilà, j'étais peinard avec ma oldstable main quand le courage m'a pris de passer à Jessie. J'ai donc une installe toute fraiche, depuis un Jessie8.2-DVD-1.iso sur clef USB.
En console root, j'ai installé/configuré ufw, adapté le sources.list(main), configuré le modem avec pppoeconf, apt-get update, upgrade, et dist-upgrade; le tout dans la joie et la bonne humeur, du genre de celle qui t'envahie quand les commandes fonctionnent et exécutent ce que tu attendais.

Le problème :
En graphique, le système plante totalement quand je ferme une application. L'écran présente des stries colorées fixes, plus de réponse clavier ni souris, pas moyen de passer en tty. Il faut rebooter.
J'ai updaté le grub2, sans résultats, mais en lisant une question récente (https://debian-facile.org/viewtopic.php … 22#p160722) je me dit que mon grub est un peu compliqué.
Quant à comprendre ce qu'il dit .... :-) ... je compte sur vous.

submenu 'Options avancées pour Debian GNU/Linux' $menuentry_id_option 'gnulinux-advanced-b69f3f1c-4d8a-444c-b6a3-9ae2a0a67418' {
  menuentry 'Debian GNU/Linux, avec Linux 3.16.0-4-amd64' --class debian --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-4-amd64-advanced-b69f3f1c-4d8a-444c-b6a3-9ae2a0a67418' {
    load_video
    insmod gzio
    if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
    insmod part_msdos
    insmod ext2
    set root='hd1,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
      search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1  b69f3f1c-4d8a-444c-b6a3-9ae2a0a67418
    else
      search --no-floppy --fs-uuid --set=root b69f3f1c-4d8a-444c-b6a3-9ae2a0a67418
    fi
    echo  'Chargement de Linux 3.16.0-4-amd64…'
    linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=b69f3f1c-4d8a-444c-b6a3-9ae2a0a67418 ro  quiet
    echo  'Chargement du disque mémoire initial…'
    initrd  /boot/initrd.img-3.16.0-4-amd64

Dernière modification par Y316 (31-01-2016 19:50:50)


Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#2 30-01-2016 09:50:53

avram
Membre
Distrib. : dual boot stable/testing/sid en 64 bits+xp virtual
Noyau : 4.9 4.18
(G)UI : lxde
Inscription : 28-01-2016

Re : [Resolu] Jessie plante en graphique

bonjour Y316.

Je ne pense pas que le lien que vous citez soit en rapport avec votre affaire;je pencherais plutôt pour un problème de pilote de carte graphique.
Quel sont les retours de la commande:


 

lspci -v

Hors ligne

#3 30-01-2016 10:42:59

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : [Resolu] Jessie plante en graphique

Bonjour,

si l'erreur est en graphique, tu peux demarrer ta jessie en rajoutant "S" à la fin de

linux /boot/vmlinuz-3.16.0-4-amd64 root=UUID=b69f3f1c-4d8a-444c-b6a3-9ae2a0a67418 ro quiet S



si la pas de plantage renvoi plutot ton

cat /var/log/Xorg.0.log



pour vérifier les log X

et ajoute le

lspci | grep -i vga



@+

Dernière modification par greenmerlin (30-01-2016 10:44:44)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#4 30-01-2016 11:32:15

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

Merci pour vos réponses.
Je vais faire tout cela mais patience, il faut que je redémarre sous Jessie car c'est la même machine pour les deux.
Pour faciliter, je voudrai essayer un navigateur en console sous Jessie. Lequel est le plus simple à utiliser ?

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#5 30-01-2016 11:43:36

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : [Resolu] Jessie plante en graphique

Bonjour,

https://packages.debian.org/jessie/elinks

apt install elinks



pour l'installer

courage t'arrive au but tongue

Dernière modification par greenmerlin (30-01-2016 11:48:59)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#6 30-01-2016 12:04:30

nono47
Invité

Re : [Resolu] Jessie plante en graphique

Y316 a écrit :

Pour faciliter, je voudrai essayer un navigateur en console sous Jessie. Lequel est le plus simple à utiliser ?


Oui, c'est le bien pour accéder à de la documentation quand le système est cassé !

Le mode d'emploi de eLinks sur le wiki ;=) https://debian-facile.org/doc:reseau:elinks

Dernière modification par nono47 (30-01-2016 12:07:38)

#7 30-01-2016 13:09:54

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

Va pour eLinks, ... la prochaine fois car je suis de nouveau sous oldstable.

J'ai fait comme demandé sous root en console puis j'ai tenté la session graphique qui cette fois a planté mais en gardant l'affichage en cours (écran figé).
Je précise qu'à l'installation j'ai choisi seulement l'option "environnement de base du système" sans cocher d'option "gnome" "Mate" ou autre. La session graphique propose Gnome d'emblée (je préfère Gnome-Classique mais on verra après).

Ci-dessous les résultats; et je vais tenter maintenant le conseil de greenmerlin.  @+

lspci -v


00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0
  Capabilities: [44] HyperTransport: Slave or Primary Interface
  Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
  Subsystem: NVIDIA Corporation Device cb84
  Flags: bus master, 66MHz, fast devsel, latency 0
  I/O ports at 4f00 [size=256]

00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: 66MHz, fast devsel, IRQ 11
  I/O ports at 4900 [size=64]
  I/O ports at 4d00 [size=64]
  I/O ports at 4e00 [size=64]
  Capabilities: [44] Power Management version 2
  Kernel driver in use: nForce2_smbus

00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: 66MHz, fast devsel

00:01.3 Co-processor: NVIDIA Corporation MCP61 SMU (rev a2)
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
  Memory at fec80000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) (prog-if 10 [OHCI])
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
  Memory at dfffb000 (32-bit, non-prefetchable) [size=4K]
  Capabilities: [44] Power Management version 2
  Kernel driver in use: ohci-pci

00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) (prog-if 20 [EHCI])
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
  Memory at dfffac00 (32-bit, non-prefetchable) [size=256]
  Capabilities: [44] Debug port: BAR=1 offset=0098
  Capabilities: [80] Power Management version 2
  Kernel driver in use: ehci-pci

00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
  Flags: bus master, 66MHz, fast devsel, latency 0
  Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
  Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84
  Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-

00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
  Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
  Capabilities: [44] Power Management version 2
  Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
  Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
  Kernel driver in use: snd_hda_intel

00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP])
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0
  [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
  [virtual] Memory at 000003f0 (type 3, non-prefetchable)
  [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
  [virtual] Memory at 00000370 (type 3, non-prefetchable)
  I/O ports at ffa0 [size=16]
  Capabilities: [44] Power Management version 2
  Kernel driver in use: pata_amd

00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
  I/O ports at d080 [size=8]
  I/O ports at d000 [size=4]
  I/O ports at cc00 [size=8]
  I/O ports at c880 [size=4]
  I/O ports at c800 [size=16]
  Memory at dfff9000 (32-bit, non-prefetchable) [size=4K]
  Capabilities: [44] Power Management version 2
  Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
  Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
  Kernel driver in use: sata_nv

00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
  I/O ports at c480 [size=8]
  I/O ports at c400 [size=4]
  I/O ports at c080 [size=8]
  I/O ports at c000 [size=4]
  I/O ports at bc00 [size=16]
  Memory at dfff8000 (32-bit, non-prefetchable) [size=4K]
  Capabilities: [44] Power Management version 2
  Capabilities: [b0] MSI: Enable- Count=1/4 Maskable- 64bit+
  Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
  Kernel driver in use: sata_nv

00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
  Flags: bus master, fast devsel, latency 0
  Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
  Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000
  Capabilities: [48] Power Management version 2
  Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
  Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
  Capabilities: [80] Express Root Port (Slot+), MSI 00
  Capabilities: [100] Virtual Channel
  Kernel driver in use: pcieport

00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
  Flags: bus master, fast devsel, latency 0
  Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
  Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000
  Capabilities: [48] Power Management version 2
  Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
  Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
  Capabilities: [80] Express Root Port (Slot+), MSI 00
  Capabilities: [100] Virtual Channel
  Kernel driver in use: pcieport

00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
  Flags: bus master, fast devsel, latency 0
  Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
  I/O behind bridge: 0000e000-0000efff
  Prefetchable memory behind bridge: 00000000dcf00000-00000000dcffffff
  Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000
  Capabilities: [48] Power Management version 2
  Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
  Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
  Capabilities: [80] Express Root Port (Slot+), MSI 00
  Capabilities: [100] Virtual Channel
  Kernel driver in use: pcieport

00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2) (prog-if 00 [VGA controller])
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
  Memory at de000000 (32-bit, non-prefetchable) [size=16M]
  Memory at c0000000 (64-bit, prefetchable) [size=256M]
  Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
  Expansion ROM at dffc0000 [disabled] [size=128K]
  Capabilities: [48] Power Management version 2
  Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
  Kernel driver in use: nouveau

00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
  Flags: fast devsel
  Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
  Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
  Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
  Flags: fast devsel
  Capabilities: [f0] Secure device <?>
  Kernel driver in use: k10temp

00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
  Flags: fast devsel

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
  Subsystem: Micro-Star International Co., Ltd. [MSI] Device 7597
  Flags: bus master, fast devsel, latency 0, IRQ 43
  I/O ports at e800 [size=256]
  Memory at dcfff000 (64-bit, prefetchable) [size=4K]
  Memory at dcff8000 (64-bit, prefetchable) [size=16K]
  Capabilities: [40] Power Management version 3
  Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Capabilities: [70] Express Endpoint, MSI 01
  Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
  Capabilities: [d0] Vital Product Data
  Capabilities: [100] Advanced Error Reporting
  Capabilities: [140] Virtual Channel
  Capabilities: [160] Device Serial Number 04-00-00-00-68-4c-e0-00
  Kernel driver in use: r8169
 



lspci | grep -i vga


00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)




cat /var/log/Xorg.0.log


[    27.969]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    27.969] X Protocol Version 11, Revision 0
[    27.969] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    27.969] Current Operating System: Linux debianJessie820 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17) x86_64
[    27.969] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=b69f3f1c-4d8a-444c-b6a3-9ae2a0a67418 ro quiet
[    27.969] Build Date: 11 February 2015  12:32:02AM
[    27.969] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[    27.969] Current version of pixman: 0.32.6
[    27.969]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    27.969] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.970] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 30 11:41:14 2016
[    28.010] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.037] (==) No Layout section.  Using the first Screen section.
[    28.037] (==) No screen section available. Using defaults.
[    28.037] (**) |-->Screen "Default Screen Section" (0)
[    28.037] (**) |   |-->Monitor "<default monitor>"
[    28.054] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    28.054] (==) Automatically adding devices
[    28.054] (==) Automatically enabling devices
[    28.054] (==) Automatically adding GPU devices
[    28.135] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.135]  Entry deleted from font path.
[    28.171] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    28.171] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.171] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.187] (II) Loader magic: 0x7f6d90860d80
[    28.187] (II) Module ABI versions:
[    28.187]  X.Org ANSI C Emulation: 0.4
[    28.187]  X.Org Video Driver: 18.0
[    28.187]  X.Org XInput driver : 21.0
[    28.187]  X.Org Server Extension : 8.0
[    28.188] (II) xfree86: Adding drm device (/dev/dri/card0)
[    28.191] (--) PCI:*(0:0:13:0) 10de:03d6:1462:7597 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xdd000000/16777216, BIOS @ 0x????????/131072
[    28.192] (II) LoadModule: "glx"
[    28.287] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.470] (II) Module glx: vendor="X.Org Foundation"
[    28.470]  compiled for 1.16.4, module version = 1.0.0
[    28.470]  ABI class: X.Org Server Extension, version 8.0
[    28.470] (==) AIGLX enabled
[    28.470] (==) Matched nouveau as autoconfigured driver 0
[    28.470] (==) Matched nv as autoconfigured driver 1
[    28.470] (==) Matched nouveau as autoconfigured driver 2
[    28.470] (==) Matched nv as autoconfigured driver 3
[    28.470] (==) Matched modesetting as autoconfigured driver 4
[    28.470] (==) Matched fbdev as autoconfigured driver 5
[    28.470] (==) Matched vesa as autoconfigured driver 6
[    28.470] (==) Assigned the driver to the xf86ConfigLayout
[    28.470] (II) LoadModule: "nouveau"
[    28.471] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    28.510] (II) Module nouveau: vendor="X.Org Foundation"
[    28.510]  compiled for 1.16.0, module version = 1.0.11
[    28.510]  Module class: X.Org Video Driver
[    28.510]  ABI class: X.Org Video Driver, version 18.0
[    28.510] (II) LoadModule: "nv"
[    28.512] (WW) Warning, couldn't open module nv
[    28.512] (II) UnloadModule: "nv"
[    28.512] (II) Unloading nv
[    28.512] (EE) Failed to load module "nv" (module does not exist, 0)
[    28.512] (II) LoadModule: "modesetting"
[    28.512] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    28.530] (II) Module modesetting: vendor="X.Org Foundation"
[    28.530]  compiled for 1.16.4, module version = 0.9.0
[    28.530]  Module class: X.Org Video Driver
[    28.530]  ABI class: X.Org Video Driver, version 18.0
[    28.530] (II) LoadModule: "fbdev"
[    28.531] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    28.542] (II) Module fbdev: vendor="X.Org Foundation"
[    28.542]  compiled for 1.15.99.904, module version = 0.4.4
[    28.542]  Module class: X.Org Video Driver
[    28.542]  ABI class: X.Org Video Driver, version 18.0
[    28.542] (II) LoadModule: "vesa"
[    28.543] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    28.552] (II) Module vesa: vendor="X.Org Foundation"
[    28.552]  compiled for 1.15.99.904, module version = 2.3.3
[    28.552]  Module class: X.Org Video Driver
[    28.552]  ABI class: X.Org Video Driver, version 18.0
[    28.552] (II) NOUVEAU driver Date:   Thu Aug 28 03:57:48 2014 +0200
[    28.552] (II) NOUVEAU driver for NVIDIA chipset families :
[    28.552]  RIVA TNT        (NV04)
[    28.552]  RIVA TNT2       (NV05)
[    28.552]  GeForce 256     (NV10)
[    28.552]  GeForce 2       (NV11, NV15)
[    28.553]  GeForce 4MX     (NV17, NV18)
[    28.553]  GeForce 3       (NV20)
[    28.553]  GeForce 4Ti     (NV25, NV28)
[    28.553]  GeForce FX      (NV3x)
[    28.553]  GeForce 6       (NV4x)
[    28.553]  GeForce 7       (G7x)
[    28.553]  GeForce 8       (G8x)
[    28.553]  GeForce GTX 200 (NVA0)
[    28.553]  GeForce GTX 400 (NVC0)
[    28.553] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    28.553] (II) FBDEV: driver for framebuffer: fbdev
[    28.553] (II) VESA: driver for VESA chipsets: vesa
[    28.553] (++) using VT number 7

[    28.558] (II) [drm] nouveau interface version: 1.1.2
[    28.558] (WW) Falling back to old probe method for modesetting
[    28.558] (WW) Falling back to old probe method for fbdev
[    28.558] (II) Loading sub module "fbdevhw"
[    28.558] (II) LoadModule: "fbdevhw"
[    28.559] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    28.562] (II) Module fbdevhw: vendor="X.Org Foundation"
[    28.562]  compiled for 1.16.4, module version = 0.0.2
[    28.562]  ABI class: X.Org Video Driver, version 18.0
[    28.562] (WW) Falling back to old probe method for vesa
[    28.562] (II) Loading sub module "dri2"
[    28.562] (II) LoadModule: "dri2"
[    28.562] (II) Module "dri2" already built-in
[    28.562] (--) NOUVEAU(0): Chipset: "NVIDIA NV4C"
[    28.562] (II) NOUVEAU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    28.562] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    28.562] (==) NOUVEAU(0): RGB weight 888
[    28.562] (==) NOUVEAU(0): Default visual is TrueColor
[    28.562] (==) NOUVEAU(0): Using HW cursor
[    28.562] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    28.562] (==) NOUVEAU(0): Page flipping enabled
[    28.562] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    28.562] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    28.562] (II) NOUVEAU(0): Initializing outputs ...
[    28.592] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    28.592] (II) NOUVEAU(0): 1 crtcs needed for screen.
[    28.592] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    28.592] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    28.622] (II) NOUVEAU(0): EDID for output VGA-1
[    28.622] (II) NOUVEAU(0): Manufacturer: AOC  Model: 2250  Serial#: 8721
[    28.622] (II) NOUVEAU(0): Year: 2012  Week: 2
[    28.622] (II) NOUVEAU(0): EDID Version: 1.3
[    28.622] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    28.622] (II) NOUVEAU(0): Sync:  Separate
[    28.622] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 48  vert.: 27
[    28.623] (II) NOUVEAU(0): Gamma: 2.20
[    28.623] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[    28.623] (II) NOUVEAU(0): First detailed timing is preferred mode
[    28.623] (II) NOUVEAU(0): redX: 0.635 redY: 0.349   greenX: 0.331 greenY: 0.618
[    28.623] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.055   whiteX: 0.312 whiteY: 0.328
[    28.623] (II) NOUVEAU(0): Supported established timings:
[    28.623] (II) NOUVEAU(0): 720x400@70Hz
[    28.623] (II) NOUVEAU(0): 640x480@60Hz
[    28.623] (II) NOUVEAU(0): 640x480@67Hz
[    28.623] (II) NOUVEAU(0): 640x480@72Hz
[    28.624] (II) NOUVEAU(0): 640x480@75Hz
[    28.624] (II) NOUVEAU(0): 800x600@56Hz
[    28.624] (II) NOUVEAU(0): 800x600@60Hz
[    28.624] (II) NOUVEAU(0): 800x600@72Hz
[    28.624] (II) NOUVEAU(0): 800x600@75Hz
[    28.624] (II) NOUVEAU(0): 832x624@75Hz
[    28.624] (II) NOUVEAU(0): 1024x768@60Hz
[    28.624] (II) NOUVEAU(0): 1024x768@70Hz
[    28.624] (II) NOUVEAU(0): 1024x768@75Hz
[    28.624] (II) NOUVEAU(0): 1280x1024@75Hz
[    28.624] (II) NOUVEAU(0): Manufacturer's mask: 0
[    28.624] (II) NOUVEAU(0): Supported standard timings:
[    28.624] (II) NOUVEAU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    28.625] (II) NOUVEAU(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    28.625] (II) NOUVEAU(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    28.625] (II) NOUVEAU(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    28.625] (II) NOUVEAU(0): #4: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    28.625] (II) NOUVEAU(0): #5: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    28.625] (II) NOUVEAU(0): Supported detailed timing:
[    28.625] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  477 x 268 mm
[    28.625] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    28.625] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    28.625] (II) NOUVEAU(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    28.626] (II) NOUVEAU(0): Monitor name: 2250W
[    28.626] (II) NOUVEAU(0): Serial No: DEPC1HA008721
[    28.626] (II) NOUVEAU(0): EDID (in hex):
[    28.626] (II) NOUVEAU(0):   00ffffffffffff0005e3502211220000
[    28.626] (II) NOUVEAU(0):   0216010368301b782a9d80a259549e27
[    28.626] (II) NOUVEAU(0):   0e5054bfef00d1c0b300950081808140
[    28.626] (II) NOUVEAU(0):   81c001010101023a801871382d40582c
[    28.626] (II) NOUVEAU(0):   4500dd0c1100001e000000fd00324c1e
[    28.626] (II) NOUVEAU(0):   5311000a202020202020000000fc0032
[    28.626] (II) NOUVEAU(0):   323530570a20202020202020000000ff
[    28.627] (II) NOUVEAU(0):   004445504331484130303837323100f8
[    28.627] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[    28.627] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    28.627] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    28.627] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    28.627] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    28.627] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    28.628] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    28.628] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    28.628] (II) NOUVEAU(0): Output VGA-1 connected
[    28.628] (II) NOUVEAU(0): Using exact sizes for initial modes
[    28.628] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080
[    28.628] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    28.628] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    28.628] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    28.628] (**) NOUVEAU(0):  Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    28.628] (**) NOUVEAU(0):  Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    28.628] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    28.628] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[    28.628] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    28.628] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[    28.629] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[    28.629] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    28.629] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[    28.629] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[    28.629] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[    28.629] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[    28.629] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    28.629] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    28.629] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    28.629] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    28.629] (==) NOUVEAU(0): DPI set to (96, 96)
[    28.629] (II) Loading sub module "fb"
[    28.629] (II) LoadModule: "fb"
[    28.629] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.642] (II) Module fb: vendor="X.Org Foundation"
[    28.642]  compiled for 1.16.4, module version = 1.0.0
[    28.642]  ABI class: X.Org ANSI C Emulation, version 0.4
[    28.642] (II) Loading sub module "shadowfb"
[    28.642] (II) LoadModule: "shadowfb"
[    28.642] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    28.654] (II) Module shadowfb: vendor="X.Org Foundation"
[    28.655]  compiled for 1.16.4, module version = 1.0.0
[    28.655]  ABI class: X.Org ANSI C Emulation, version 0.4
[    28.655] (II) UnloadModule: "modesetting"
[    28.655] (II) Unloading modesetting
[    28.655] (II) UnloadModule: "fbdev"
[    28.655] (II) Unloading fbdev
[    28.655] (II) UnloadSubModule: "fbdevhw"
[    28.655] (II) Unloading fbdevhw
[    28.655] (II) UnloadModule: "vesa"
[    28.655] (II) Unloading vesa
[    28.656] (--) Depth 24 pixmap format is 32 bpp
[    28.661] (II) NOUVEAU(0): Channel setup complete.
[    28.665] (II) NOUVEAU(0): [DRI2] Setup complete
[    28.665] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    28.665] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    28.672] (II) Loading sub module "exa"
[    28.672] (II) LoadModule: "exa"
[    28.672] (II) Loading /usr/lib/xorg/modules/libexa.so
[    28.688] (II) Module exa: vendor="X.Org Foundation"
[    28.689]  compiled for 1.16.4, module version = 2.6.0
[    28.689]  ABI class: X.Org Video Driver, version 18.0
[    28.689] (II) EXA(0): Driver allocated offscreen pixmaps
[    28.689] (II) EXA(0): Driver registered support for the following operations:
[    28.689] (II)         Solid
[    28.689] (II)         Copy
[    28.689] (II)         Composite (RENDER acceleration)
[    28.689] (II)         UploadToScreen
[    28.689] (II)         DownloadFromScreen
[    28.689] (==) NOUVEAU(0): Backing store enabled
[    28.689] (==) NOUVEAU(0): Silken mouse enabled
[    28.692] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[    28.692] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    28.692] (==) NOUVEAU(0): DPMS enabled
[    28.692] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.695] (--) RandR disabled
[    28.708] (II) SELinux: Disabled on system
[    29.816] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    29.816] (II) AIGLX: enabled GLX_ARB_create_context
[    29.816] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    29.816] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    29.816] (II) AIGLX: enabled GLX_INTEL_swap_event
[    29.816] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    29.816] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    29.816] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    29.816] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    29.818] (II) AIGLX: Loaded and initialized nouveau
[    29.818] (II) GLX: Initialized DRI2 GL provider for screen 0
[    29.824] (II) NOUVEAU(0): NVEnterVT is called.
[    29.879] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[    29.879] resize called 1920 1080
[    30.368] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    30.368] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.368] (II) LoadModule: "evdev"
[    30.369] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.415] (II) Module evdev: vendor="X.Org Foundation"
[    30.415]  compiled for 1.16.0, module version = 2.9.0
[    30.415]  Module class: X.Org XInput Driver
[    30.415]  ABI class: X.Org XInput driver, version 21.0
[    30.415] (II) Using input driver 'evdev' for 'Power Button'
[    30.415] (**) Power Button: always reports core events
[    30.415] (**) evdev: Power Button: Device: "/dev/input/event3"
[    30.415] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.415] (--) evdev: Power Button: Found keys
[    30.415] (II) evdev: Power Button: Configuring as keyboard
[    30.415] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event3"
[    30.415] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    30.416] (**) Option "xkb_rules" "evdev"
[    30.416] (**) Option "xkb_model" "pc105"
[    30.416] (**) Option "xkb_layout" "fr"
[    30.416] (**) Option "xkb_variant" "latin9"
[    30.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    30.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.479] (II) Using input driver 'evdev' for 'Power Button'
[    30.479] (**) Power Button: always reports core events
[    30.479] (**) evdev: Power Button: Device: "/dev/input/event2"
[    30.479] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.479] (--) evdev: Power Button: Found keys
[    30.479] (II) evdev: Power Button: Configuring as keyboard
[    30.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event2"
[    30.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    30.479] (**) Option "xkb_rules" "evdev"
[    30.479] (**) Option "xkb_model" "pc105"
[    30.479] (**) Option "xkb_layout" "fr"
[    30.479] (**) Option "xkb_variant" "latin9"
[    30.479] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event0)
[    30.479] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    30.479] (II) Using input driver 'evdev' for 'PixArt Microsoft USB Optical Mouse'
[    30.479] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[    30.479] (**) evdev: PixArt Microsoft USB Optical Mouse: Device: "/dev/input/event0"
[    30.479] (--) evdev: PixArt Microsoft USB Optical Mouse: Vendor 0x45e Product 0xcb
[    30.479] (--) evdev: PixArt Microsoft USB Optical Mouse: Found 3 mouse buttons
[    30.479] (--) evdev: PixArt Microsoft USB Optical Mouse: Found scroll wheel(s)
[    30.479] (--) evdev: PixArt Microsoft USB Optical Mouse: Found relative axes
[    30.479] (--) evdev: PixArt Microsoft USB Optical Mouse: Found x and y relative axes
[    30.479] (II) evdev: PixArt Microsoft USB Optical Mouse: Configuring as mouse
[    30.479] (II) evdev: PixArt Microsoft USB Optical Mouse: Adding scrollwheel support
[    30.479] (**) evdev: PixArt Microsoft USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    30.480] (**) evdev: PixArt Microsoft USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    30.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:045E:00CB.0001/input/input2/event0"
[    30.480] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 8)
[    30.480] (II) evdev: PixArt Microsoft USB Optical Mouse: initialized for relative axes.
[    30.480] (**) PixArt Microsoft USB Optical Mouse: (accel) keeping acceleration scheme 1
[    30.480] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration profile 0
[    30.480] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[    30.480] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[    30.480] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[    30.480] (II) No input driver specified, ignoring this device.
[    30.480] (II) This device may have been added with another device file.
[    30.480] (II) config/udev: Adding input device Microsoft Wired Keyboard 400 (/dev/input/event1)
[    30.480] (**) Microsoft Wired Keyboard 400: Applying InputClass "evdev keyboard catchall"
[    30.480] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 400'
[    30.480] (**) Microsoft Wired Keyboard 400: always reports core events
[    30.480] (**) evdev: Microsoft Wired Keyboard 400: Device: "/dev/input/event1"
[    30.480] (--) evdev: Microsoft Wired Keyboard 400: Vendor 0x45e Product 0x752
[    30.480] (--) evdev: Microsoft Wired Keyboard 400: Found keys
[    30.480] (II) evdev: Microsoft Wired Keyboard 400: Configuring as keyboard
[    30.480] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:045E:0752.0002/input/input3/event1"
[    30.480] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 400" (type: KEYBOARD, id 9)
[    30.480] (**) Option "xkb_rules" "evdev"
[    30.480] (**) Option "xkb_model" "pc105"
[    30.480] (**) Option "xkb_layout" "fr"
[    30.480] (**) Option "xkb_variant" "latin9"
[    30.481] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[    30.481] (II) No input driver specified, ignoring this device.
[    30.481] (II) This device may have been added with another device file.
[    30.481] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event8)
[    30.481] (II) No input driver specified, ignoring this device.
[    30.481] (II) This device may have been added with another device file.
[    30.481] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9)
[    30.481] (II) No input driver specified, ignoring this device.
[    30.481] (II) This device may have been added with another device file.
[    30.482] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event5)
[    30.482] (II) No input driver specified, ignoring this device.
[    30.482] (II) This device may have been added with another device file.
[    30.482] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event6)
[    30.482] (II) No input driver specified, ignoring this device.
[    30.482] (II) This device may have been added with another device file.
[    30.482] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    30.482] (II) No input driver specified, ignoring this device.
[    30.482] (II) This device may have been added with another device file.
[    40.611] (II) NOUVEAU(0): EDID vendor "AOC", prod id 8784
[    40.612] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    40.612] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    40.612] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    40.612] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    40.612] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    40.612] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    40.928] resize called 1920 1080
[    49.292] (II) NOUVEAU(0): EDID vendor "AOC", prod id 8784
[    49.292] (II) NOUVEAU(0): Using hsync ranges from config file
[    49.292] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    49.292] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    49.292] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    49.292] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    49.292] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    49.293] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[   641.612] (II) AIGLX: Suspending AIGLX clients for VT switch
[   641.613] (II) NOUVEAU(0): NVLeaveVT is called.
[   694.877] (II) config/udev: removing device PixArt Microsoft USB Optical Mouse
[   694.877] (II) evdev: PixArt Microsoft USB Optical Mouse: Close
[   694.877] (II) UnloadModule: "evdev"
[   696.698] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/event0)
[   696.698] (**) PixArt Microsoft USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   696.698] (II) Using input driver 'evdev' for 'PixArt Microsoft USB Optical Mouse'
[   696.698] (**) PixArt Microsoft USB Optical Mouse: always reports core events
[   696.698] (**) evdev: PixArt Microsoft USB Optical Mouse: Device: "/dev/input/event0"
[   696.708] (--) evdev: PixArt Microsoft USB Optical Mouse: Vendor 0x45e Product 0xcb
[   696.708] (--) evdev: PixArt Microsoft USB Optical Mouse: Found 3 mouse buttons
[   696.708] (--) evdev: PixArt Microsoft USB Optical Mouse: Found scroll wheel(s)
[   696.708] (--) evdev: PixArt Microsoft USB Optical Mouse: Found relative axes
[   696.708] (--) evdev: PixArt Microsoft USB Optical Mouse: Found x and y relative axes
[   696.708] (II) evdev: PixArt Microsoft USB Optical Mouse: Configuring as mouse
[   696.708] (II) evdev: PixArt Microsoft USB Optical Mouse: Adding scrollwheel support
[   696.708] (**) evdev: PixArt Microsoft USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   696.708] (**) evdev: PixArt Microsoft USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   696.708] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:045E:00CB.0003/input/input13/event0"
[   696.708] (II) XINPUT: Adding extended input device "PixArt Microsoft USB Optical Mouse" (type: MOUSE, id 8)
[   696.708] (II) evdev: PixArt Microsoft USB Optical Mouse: initialized for relative axes.
[   696.708] (**) PixArt Microsoft USB Optical Mouse: (accel) keeping acceleration scheme 1
[   696.708] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration profile 0
[   696.708] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration factor: 2.000
[   696.708] (**) PixArt Microsoft USB Optical Mouse: (accel) acceleration threshold: 4
[   696.708] (II) config/udev: Adding input device PixArt Microsoft USB Optical Mouse (/dev/input/mouse0)
[   696.708] (II) No input driver specified, ignoring this device.
[   696.708] (II) This device may have been added with another device file.


Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#8 30-01-2016 13:50:06

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : [Resolu] Jessie plante en graphique

Je te suggère d’installer les drivers proprio sur ta testing

Téléchargez l'installateur à partir du site web Nvidia

ensuite

apt install linux-headers-`uname -r` build-essential



pour installer le nécessaire

systemctl isolate multi-user.target



pour stopper le serveur X

chmod u+x NVIDIA-Linux-x86_64-*****.run



./NVIDIA-Linux-x86_64-******.run



pour lancer l'installation. Les étoiles sont à remlacer par ton nom de fichier exact

Dernière modification par greenmerlin (30-01-2016 14:15:46)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#9 30-01-2016 14:01:14

seb95deMLO
Invité

Re : [Resolu] Jessie plante en graphique

Tu n'es pas le seul a avoir ce soucis avec cette jessie, de mon coté aussi j'ai eu pas mal de problème de freeze jusqu’à ce que la mise a jour 8.2 sorte. J'ai eu trois pc qui fonctionnent tres bien d'habitude et sous debian jessie plus rien. Pourtant une de ses bécane était en wheezy.

Le seul truc que j'ai pu faire c'etait passé en sid ou je n'avais pas de soucis.

Je sais je ne t'aide pas et j'en suis desolé.:/

#10 30-01-2016 15:20:39

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

L'ajoût d'un "S" dans le menu de grub ne donne rien.

J'ai pu utiliser elinks, mais je me suis perdu dans les touches et perdu trois fois mon message avant de le poster, .... faut le temps de s'habituer.
Alors j'ai tenté la session graphique qui a planté pareil dès l'ouverture de iceweasel.

@greenmerlin :
Merci pour ta proposition mais quid de ceux qui veulent rester en "main" ? Il me semble que les pilotes propriétaires sont dans "contrib".
Je ne suis pas en testing mais en stable. Je voudrai simplement installer Jessie main; est-ce possible ?

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#11 30-01-2016 15:46:45

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

Je vais vérifier l'installation du pilote libre "nouveau" avec ce tuto : https://debian-facile.org/doc:materiel: … ia:accueil.

@+

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#12 30-01-2016 20:00:05

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

Et bien, rien n'y fait. Selon le tuto précédent, tout est conforme pour le pilote "nouveau". Mais pas de résultats, la session graphique plante le système de façon aléatoire; à la dernière connexion j'ai pu l'utiliser un temps et même paramètrer iceweasel; mais plantage en fermant l'onglet.

Sauf nouvelle idée, je vais quand même tenter les pilotes propriétaires, histoire de ....
Mais je préfèrerais rester en "main".
Ps: si vous voyez ce message c'est que j'ai réussi à poster avec elinks.
:-))

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#13 30-01-2016 20:12:18

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

:-)))
Miracle ! Je me vois aussi !

Dans les paquets main il y a un xserver-xorg-video-nouveau installé mais aussi un xserver-xorg-video-nouveau-dbg qui n'est pas installé.
Idem pour les paquets libgl1-mesa-glx et libgl1-mesa-dri.
Pensez vous qu'ils sont utiles ?

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#14 31-01-2016 19:42:24

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

Bonne nouvelle ! :-)

Après divers tatouillages sans résultats, je me suis décidé à installer le pilote nvidia et cela semble bien tenir pour l'instant. L'ennui c'est que me voilà en contrib et non-free mais comme dit le :

nvidia detect


Detected NVIDIA GPUs:
00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] [10de:03d6] (rev a2)
Your card is only supported up to the 304 legacy drivers series.
It is recommended to install the
    nvidia-legacy-304xx-driver
package.



Pour l'ensemble j'ai fait comme indiqué sur le tutoriel : https://debian-facile.org/doc:materiel: … ia:accueil.
J'ai installé le paquet recommandé par nvidia detect et comme prévu il a fallu ensuite modifier le xorg.conf.
Le tout avec l'aide précieuse de eLinks;  et au reboot :  /me revois là :-)  Merci à vous.

Ps:
mais pas de chocolat, je passe en résolu de suite !


Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#15 31-01-2016 19:51:01

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [Resolu] Jessie plante en graphique

greenmerlin a écrit :

Téléchargez l'installateur à partir du site web Nvidia


Alors, installer le driver propriétaire depuis le .run de nvidia est bien la dernière
chose à faire. C'est plus source de problème que d'autre chose, car le .run va
remplacer certaine librairie installé par le système de paquetage sans que ce dernier
soit au courant, et donc quand il va avoir des mises à jour, ça va écraser les librairies
installés par le .run. Finalement, il est fort probable que X ne voudra plus fonctionner…

Hors ligne

#16 31-01-2016 19:56:19

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

Je ne comprends pas ce que tu appelles l'installateur.
J'ai passé le sources.list en contrib et non-free.
Cela m'a permis d'installer "nvidia detect" que j'ai lancé en commande.
Puis j'ai installé le paquet recommandé avec apt-get.
Je ne suis pas allé sur le site nvidia.

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#17 31-01-2016 20:12:48

anonyme
Invité

Re : [Resolu] Jessie plante en graphique

le .run du constructeur a son dossier d'installation , il ne touche pas au paquet debian et c'est la seule alternative pour une stable et un gpu trés récent.
c'est la modification du noyau qui pose probleme pour le .run (cas fréquent pour une stretch ou sid )
la réinstallation du .run corrige ce souci (qui ne devrait jamais arriver avec une stable )
Pour info je pense que la prochaine stable prendra en charge les derniers gpu nvidia (sid le fait déja avec le 352.79-1
Dans le cas d une vieille carte , d'utiliser le 304 est une trés bonne solution
et pour amd les choses bougent aussi , jai pas eu encore le temps de tester mais les versions évoluent .
Pour jessie jusqu a son passage en oldstable le .run reste le meilleur choix pour des cartes trés recentes
il est possible de faire du pinning avec sid , mais ça reste une opération délicate quand meme.
J'ai 4 machines en .run sous jessie , jamais eu de problemes avec et elles sont a jour
@++

ps:
@Y316
tu a fait ce qu il fallait  wink
détecter ta carte et suivre le conseil de l utilitaire dans ton cas installer le driver 304 des dépots

Dernière modification par anonyme (31-01-2016 20:16:37)

#18 31-01-2016 20:19:59

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [Resolu] Jessie plante en graphique

anonyme a écrit :

le .run du constructeur a son dossier d'installation , il ne touche pas au paquet debian


Alors ça a changé, parce que avant ce n'était pas comme ça. D'ailleurs le .run faisait une sauvegarde
dans /var/truc/nvidiamachin/ des librairies qu'il modifiait…

Dernière modification par enicar (31-01-2016 20:20:22)

Hors ligne

#19 31-01-2016 20:31:23

anonyme
Invité

Re : [Resolu] Jessie plante en graphique

Oui je pense , de toute maniere la methode avoir le minimum installé selon la doc du site (pas de driver debian nvidia ) et en mode console pure (serveur X stopé)
la désactivation de nouveau se fait au reboot
bon ça fait un moment que je n en installe plus (et a mon avis ça risque de ne plus ce reproduire ).
a moins que nvidia pour 2016 nous sorte encore des nouveaux gpu et des nouveau drivers , comme amd pour l'instant n'a pas l intention de se laisser faire tongue
la mode est a l installation de la mémoire sur la puce et plus sur le pcb de la carte .(nouvelles puces mémoires )
enfin l'avenir nous le dira smile

#20 31-01-2016 20:32:52

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

@ anonyme :
J'ai fait la seule chose qui fonctionnait sur mon vieux matériel (avec une puce graphique intégrée à la carte mère). Mais je préférerais quand même rester en "main". Peut-être la prochaine "stable".

@ enicar :
Je peux chercher s'il y a une sauvegarde et quels sont les bibliothèques installées mais il faut mieux préciser le chemin.

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#21 01-02-2016 16:48:37

anonyme
Invité

Re : [Resolu] Jessie plante en graphique

Bonjour
@Y316
le driver libre "nouveau" évolue avec la version de debian et pour du materiel récent , donc avec la prochaine stable le souci va empirer.
si je dis pas de bètises , la version de nouveau est lié a la version du noyau , j'ai eu le meme souci que toi avec de vieilles cartes que j ai remplacé par des plus récentes . (mais anciennes)

#22 01-02-2016 18:30:13

Y316
Membre
Distrib. : stretch
Noyau : Linux 4.9.0-8-amd64
(G)UI : MATE 1.16.2
Inscription : 15-11-2012

Re : [Resolu] Jessie plante en graphique

Hélas, j'en ai bien conscience; comme disait l'humoriste : "misère, misère, c'est toujours sur les pauvres gens que tu t'acharnes obstinément !".
J'ai deux vieilles cartes inutilisées (dont une ATI), je vais regarder si elles pourraient mieux convenir.

Debian 9 (stretch)  + la pire ICC que vous ayez probablement jamais rencontré.

Hors ligne

#23 01-02-2016 20:13:26

anonyme
Invité

Re : [Resolu] Jessie plante en graphique

Pour info nouveau fonctionne bien avec la serie 8xxx en PCIe , sur le serveur je suis passé a des GT8800 1G0 avec stretch (pour jessie je n ai que des cartes récentes et le .run donc je pourrai pas te dire )

Pied de page des forums