logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 15-03-2016 20:19:06

jettero
Membre
Lieu : Lausanne (suisse)
Distrib. : Debian GNU/Linux Bookworm
Noyau : Linux 5.18.0-4-amd64
(G)UI : gdm3
Inscription : 09-03-2016

(RESOLU) Plantage environnement graphique - Ecran secondaire

Bonjour à tous,

Au risque de fâcher, j'ai posté ma requête sur l'autre forum Debian et je m'en excuse par avance. Mais j'ai un vrai problème qui pénalise mon travail et me ralenti tous les jours.

J'ai un macbook pro sur lequel tourne Debian en testing. Je travaille avec un écran secondaire (plus confortable pour le travail au bureau). Je tiens à dire que jusqu'à peu de temps en arrière tout allait bien ! Donc je n'arrive pas à expliquer l'origine de mon soucis si ce n'est peut être une mise à jour.

Parfois mon environnement graphique se plante sans crier gare. Je me retrouve en ligne de commande. Si je relance ma session graphique, je me retrouve dans une session graphique "diminuée" : plus de mails, plus de connexion avec mes outils habituels tels que mon cloud et d'autres connexions caldav ou cardav. Bref, je suis bon pour rebooter.

Ceci se produit de façon inopinée aussi bien si je branche mon écran secondaire que quand je le débranche. Je me retrouve en ligne de commande.

Voici quelques détails :


root@macdeb:~# lspci -v

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
  Subsystem: Apple Inc. 3rd Gen Core processor Graphics Controller
  Flags: bus master, fast devsel, latency 0, IRQ 35
  Memory at a0000000 (64-bit, non-prefetchable) [size=4M]
  Memory at 90000000 (64-bit, prefetchable) [size=256M]
  I/O ports at 2000 [size=64]
  Expansion ROM at <unassigned> [disabled]
  Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Capabilities: [d0] Power Management version 2
  Capabilities: [a4] PCI Advanced Features
  Kernel driver in use: i915
  Kernel modules: i915
 



root@macdeb:~# apt-cache policy xserver-xorg-video-intel
xserver-xorg-video-intel:
  Installé : 2:2.99.917+git20160218-1
  Candidat : 2:2.99.917+git20160218-1
 Table de version :
 *** 2:2.99.917+git20160218-1 500
        500 http://ftp.ch.debian.org/debian testing/main amd64 Packages
        500 http://http.us.debian.org/debian testing/main amd64 Packages
        100 /var/lib/dpkg/status

 



root@macdeb:~# lsmod |grep i915
i915                 1122304  9
drm_kms_helper        131072  1 i915
drm                   348160  11 i915,drm_kms_helper
i2c_algo_bit           16384  1 i915
video                  36864  2 i915,apple_gmux
button                 16384  1 i915



J'ai suspecté un problème de driver. Mais je ne sais pas où commencer mes recherches. Je dois dire que pour résoudre le problème j'ai tenté de tout réinstallé au propre sur une "stable" mais là les problèmes liés à l'affichage étaient pire. Bref, suis retourné sur une testing, mais même réinstallé au propre n'a rien changé.

Si vous avez des idées, je suis (désespéré) preneur

Dernière modification par jettero (16-03-2016 14:36:07)

Hors ligne

#2 15-03-2016 20:32:31

Dunatotatos
Invité

Re : (RESOLU) Plantage environnement graphique - Ecran secondaire

Rien dans les logs ? Un crash graphique est généralement traçable dans /var/log/Xorg.0.log

#3 15-03-2016 20:54:52

jettero
Membre
Lieu : Lausanne (suisse)
Distrib. : Debian GNU/Linux Bookworm
Noyau : Linux 5.18.0-4-amd64
(G)UI : gdm3
Inscription : 09-03-2016

Re : (RESOLU) Plantage environnement graphique - Ecran secondaire

Bonjour Sid,

Je ne sais pas lire les logs. Je le poste, peut être tu y verras quelque chose. Désolé, il est un peu long... j'ai planté l'environnement graphique et ai relancé avec

startx

puis j'ai obtenu le log.

[   242.045]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[   242.045] X Protocol Version 11, Revision 0
[   242.045] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   242.045] Current Operating System: Linux macdeb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) x86_64
[   242.045] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=93329228-0355-4175-a2a1-d7f11811a45e ro quiet
[   242.045] Build Date: 11 February 2015  12:32:02AM
[   242.045] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[   242.045] Current version of pixman: 0.33.6
[   242.045]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[   242.045] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   242.045] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 15 07:44:13 2016
[   242.046] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   242.046] (==) No Layout section.  Using the first Screen section.
[   242.046] (==) No screen section available. Using defaults.
[   242.046] (**) |-->Screen "Default Screen Section" (0)
[   242.046] (**) |   |-->Monitor "<default monitor>"
[   242.047] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[   242.047] (==) Automatically adding devices
[   242.047] (==) Automatically enabling devices
[   242.047] (==) Automatically adding GPU devices
[   242.047] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   242.047]  Entry deleted from font path.
[   242.047] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[   242.047] (==) ModulePath set to "/usr/lib/xorg/modules"
[   242.047] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[   242.047] (II) Loader magic: 0x7f84e334fd80
[   242.047] (II) Module ABI versions:
[   242.047]  X.Org ANSI C Emulation: 0.4
[   242.047]  X.Org Video Driver: 18.0
[   242.047]  X.Org XInput driver : 21.0
[   242.047]  X.Org Server Extension : 8.0
[   242.048] (II) xfree86: Adding drm device (/dev/dri/card0)
[   242.050] (--) PCI:*(0:0:2:0) 8086:0166:106b:00fa rev 9, Mem @ 0xa0000000/4194304, 0x90000000/268435456, I/O @ 0x00002000/64
[   242.051] (II) LoadModule: "glx"
[   242.051] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   242.054] (II) Module glx: vendor="X.Org Foundation"
[   242.054]  compiled for 1.16.4, module version = 1.0.0
[   242.054]  ABI class: X.Org Server Extension, version 8.0
[   242.054] (==) AIGLX enabled
[   242.054] (==) Matched intel as autoconfigured driver 0
[   242.054] (==) Matched intel as autoconfigured driver 1
[   242.054] (==) Matched modesetting as autoconfigured driver 2
[   242.054] (==) Matched fbdev as autoconfigured driver 3
[   242.054] (==) Matched vesa as autoconfigured driver 4
[   242.054] (==) Assigned the driver to the xf86ConfigLayout
[   242.054] (II) LoadModule: "intel"
[   242.054] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   242.055] (II) Module intel: vendor="X.Org Foundation"
[   242.055]  compiled for 1.15.99.904, module version = 2.21.15
[   242.055]  Module class: X.Org Video Driver
[   242.055]  ABI class: X.Org Video Driver, version 18.0
[   242.055] (II) LoadModule: "modesetting"
[   242.055] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   242.055] (II) Module modesetting: vendor="X.Org Foundation"
[   242.055]  compiled for 1.16.4, module version = 0.9.0
[   242.055]  Module class: X.Org Video Driver
[   242.055]  ABI class: X.Org Video Driver, version 18.0
[   242.055] (II) LoadModule: "fbdev"
[   242.055] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   242.056] (II) Module fbdev: vendor="X.Org Foundation"
[   242.056]  compiled for 1.15.99.904, module version = 0.4.4
[   242.056]  Module class: X.Org Video Driver
[   242.056]  ABI class: X.Org Video Driver, version 18.0
[   242.056] (II) LoadModule: "vesa"
[   242.056] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   242.056] (II) Module vesa: vendor="X.Org Foundation"
[   242.056]  compiled for 1.15.99.904, module version = 2.3.3
[   242.056]  Module class: X.Org Video Driver
[   242.056]  ABI class: X.Org Video Driver, version 18.0
[   242.056] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[   242.057] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   242.057] (II) FBDEV: driver for framebuffer: fbdev
[   242.057] (II) VESA: driver for VESA chipsets: vesa
[   242.057] (++) using VT number 7

[   242.057] (WW) Falling back to old probe method for modesetting
[   242.058] (WW) Falling back to old probe method for fbdev
[   242.058] (II) Loading sub module "fbdevhw"
[   242.058] (II) LoadModule: "fbdevhw"
[   242.058] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   242.058] (II) Module fbdevhw: vendor="X.Org Foundation"
[   242.058]  compiled for 1.16.4, module version = 0.0.2
[   242.058]  ABI class: X.Org Video Driver, version 18.0
[   242.058] (WW) Falling back to old probe method for vesa
[   242.058] (II) intel(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[   242.058] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   242.058] (==) intel(0): RGB weight 888
[   242.058] (==) intel(0): Default visual is TrueColor
[   242.058] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[   242.058] (**) intel(0): Relaxed fencing enabled
[   242.058] (**) intel(0): Wait on SwapBuffers? enabled
[   242.058] (**) intel(0): Triple buffering? enabled
[   242.058] (**) intel(0): Framebuffer tiled
[   242.058] (**) intel(0): Pixmaps tiled
[   242.058] (**) intel(0): 3D buffers tiled
[   242.058] (**) intel(0): SwapBuffers wait enabled
[   242.058] (==) intel(0): video overlay key set to 0x101fe
[   242.059] (II) intel(0): Output LVDS1 has no monitor section
[   242.059] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[   242.072] (II) intel(0): Output VGA1 has no monitor section
[   242.072] (II) intel(0): Output HDMI1 has no monitor section
[   242.072] (II) intel(0): Output DP1 has no monitor section
[   242.072] (II) intel(0): Output HDMI2 has no monitor section
[   242.073] (II) intel(0): Output HDMI3 has no monitor section
[   242.073] (II) intel(0): Output DP2 has no monitor section
[   242.073] (II) intel(0): Output DP3 has no monitor section
[   242.073] (II) intel(0): EDID for output LVDS1
[   242.073] (II) intel(0): Manufacturer: APP  Model: 9cc7  Serial#: 0
[   242.073] (II) intel(0): Year: 2009  Week: 36
[   242.073] (II) intel(0): EDID Version: 1.3
[   242.073] (II) intel(0): Digital Display Input
[   242.073] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 18
[   242.073] (II) intel(0): Gamma: 2.20
[   242.073] (II) intel(0): No DPMS capabilities specified
[   242.073] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   242.073] (II) intel(0): First detailed timing is preferred mode
[   242.073] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.310 greenY: 0.610
[   242.073] (II) intel(0): blueX: 0.150 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
[   242.073] (II) intel(0): Manufacturer's mask: 0
[   242.073] (II) intel(0): Supported detailed timing:
[   242.073] (II) intel(0): clock: 72.5 MHz   Image Size:  286 x 179 mm
[   242.073] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1423 h_border: 0
[   242.073] (II) intel(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 846 v_border: 0
[   242.073] (II) intel(0): Unknown vendor-specific block 1
[   242.073] (II) intel(0):  LTN133AT09
[   242.073] (II) intel(0): Monitor name: Color LCD
[   242.073] (II) intel(0): EDID (in hex):
[   242.073] (II) intel(0):   00ffffffffffff000610c79c00000000
[   242.073] (II) intel(0):   24130103801d12780ae585a3544f9c26
[   242.073] (II) intel(0):   0e505400000001010101010101010101
[   242.073] (II) intel(0):   010101010101521c008f50202e303020
[   242.073] (II) intel(0):   36001eb3100000190000000100061020
[   242.073] (II) intel(0):   00000000000000000a20000000fe004c
[   242.073] (II) intel(0):   544e31333341543039000a20000000fc
[   242.073] (II) intel(0):   00436f6c6f72204c43440a202020003e
[   242.074] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[   242.074] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   242.074] (II) intel(0): Printing probed modes for output LVDS1
[   242.074] (II) intel(0): Modeline "1280x800"x60.2   72.50  1280 1328 1360 1423  800 803 809 846 -hsync -vsync (50.9 kHz eP)
[   242.074] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   242.074] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   242.074] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   242.074] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   242.088] (II) intel(0): EDID for output VGA1
[   242.088] (II) intel(0): EDID for output HDMI1
[   242.088] (II) intel(0): EDID for output DP1
[   242.088] (II) intel(0): EDID for output HDMI2
[   242.089] (II) intel(0): EDID for output HDMI3
[   242.089] (II) intel(0): EDID for output DP2
[   242.089] (II) intel(0): EDID for output DP3
[   242.089] (II) intel(0): Output LVDS1 connected
[   242.089] (II) intel(0): Output VGA1 disconnected
[   242.089] (II) intel(0): Output HDMI1 disconnected
[   242.089] (II) intel(0): Output DP1 disconnected
[   242.089] (II) intel(0): Output HDMI2 disconnected
[   242.089] (II) intel(0): Output HDMI3 disconnected
[   242.089] (II) intel(0): Output DP2 disconnected
[   242.089] (II) intel(0): Output DP3 disconnected
[   242.089] (II) intel(0): Using exact sizes for initial modes
[   242.089] (II) intel(0): Output LVDS1 using initial mode 1280x800
[   242.089] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   242.089] (II) intel(0): Kernel page flipping support detected, enabling
[   242.089] (==) intel(0): DPI set to (96, 96)
[   242.089] (II) Loading sub module "fb"
[   242.089] (II) LoadModule: "fb"
[   242.089] (II) Loading /usr/lib/xorg/modules/libfb.so
[   242.089] (II) Module fb: vendor="X.Org Foundation"
[   242.089]  compiled for 1.16.4, module version = 1.0.0
[   242.089]  ABI class: X.Org ANSI C Emulation, version 0.4
[   242.089] (II) Loading sub module "dri2"
[   242.089] (II) LoadModule: "dri2"
[   242.089] (II) Module "dri2" already built-in
[   242.089] (II) UnloadModule: "modesetting"
[   242.089] (II) Unloading modesetting
[   242.089] (II) UnloadModule: "fbdev"
[   242.089] (II) Unloading fbdev
[   242.089] (II) UnloadSubModule: "fbdevhw"
[   242.089] (II) Unloading fbdevhw
[   242.089] (II) UnloadModule: "vesa"
[   242.089] (II) Unloading vesa
[   242.090] (==) Depth 24 pixmap format is 32 bpp
[   242.090] (II) intel(0): [DRI2] Setup complete
[   242.090] (II) intel(0): [DRI2]   DRI driver: i965
[   242.090] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[   242.091] (II) UXA(0): Driver registered support for the following operations:
[   242.091] (II)         solid
[   242.091] (II)         copy
[   242.091] (II)         composite (RENDER acceleration)
[   242.091] (II)         put_image
[   242.091] (II)         get_image
[   242.091] (==) intel(0): Backing store enabled
[   242.091] (==) intel(0): Silken mouse enabled
[   242.091] (II) intel(0): Initializing HW Cursor
[   242.091] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   242.091] (==) intel(0): DPMS enabled
[   242.091] (==) intel(0): Intel XvMC decoder enabled
[   242.091] (II) intel(0): Set up textured video
[   242.091] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   242.091] (II) intel(0): direct rendering: DRI2 Enabled
[   242.091] (==) intel(0): hotplug detection: "enabled"
[   242.116] (--) RandR disabled
[   242.121] (II) SELinux: Disabled on system
[   242.136] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   242.136] (II) AIGLX: enabled GLX_ARB_create_context
[   242.136] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   242.136] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   242.136] (II) AIGLX: enabled GLX_INTEL_swap_event
[   242.136] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   242.136] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   242.136] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   242.136] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   242.136] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   242.137] (II) AIGLX: Loaded and initialized i965
[   242.137] (II) GLX: Initialized DRI2 GL provider for screen 0
[   242.137] (II) intel(0): Setting screen physical size to 338 x 211
[   242.171] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   242.171] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   242.171] (II) LoadModule: "evdev"
[   242.171] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   242.172] (II) Module evdev: vendor="X.Org Foundation"
[   242.172]  compiled for 1.16.0, module version = 2.9.0
[   242.172]  Module class: X.Org XInput Driver
[   242.172]  ABI class: X.Org XInput driver, version 21.0
[   242.172] (II) Using input driver 'evdev' for 'Power Button'
[   242.172] (**) Power Button: always reports core events
[   242.172] (**) evdev: Power Button: Device: "/dev/input/event5"
[   242.172] (--) evdev: Power Button: Vendor 0 Product 0x1
[   242.172] (--) evdev: Power Button: Found keys
[   242.172] (II) evdev: Power Button: Configuring as keyboard
[   242.172] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[   242.172] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   242.172] (**) Option "xkb_rules" "evdev"
[   242.172] (**) Option "xkb_model" "pc105"
[   242.172] (**) Option "xkb_layout" "ch"
[   242.172] (**) Option "xkb_variant" "fr"
[   242.188] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[   242.188] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   242.188] (II) Using input driver 'evdev' for 'Video Bus'
[   242.188] (**) Video Bus: always reports core events
[   242.188] (**) evdev: Video Bus: Device: "/dev/input/event15"
[   242.188] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   242.188] (--) evdev: Video Bus: Found keys
[   242.188] (II) evdev: Video Bus: Configuring as keyboard
[   242.188] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15/event15"
[   242.188] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   242.188] (**) Option "xkb_rules" "evdev"
[   242.188] (**) Option "xkb_model" "pc105"
[   242.188] (**) Option "xkb_layout" "ch"
[   242.188] (**) Option "xkb_variant" "fr"
[   242.189] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   242.189] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   242.189] (II) Using input driver 'evdev' for 'Power Button'
[   242.189] (**) Power Button: always reports core events
[   242.189] (**) evdev: Power Button: Device: "/dev/input/event3"
[   242.189] (--) evdev: Power Button: Vendor 0 Product 0x1
[   242.189] (--) evdev: Power Button: Found keys
[   242.189] (II) evdev: Power Button: Configuring as keyboard
[   242.189] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[   242.189] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   242.189] (**) Option "xkb_rules" "evdev"
[   242.189] (**) Option "xkb_model" "pc105"
[   242.189] (**) Option "xkb_layout" "ch"
[   242.189] (**) Option "xkb_variant" "fr"
[   242.189] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   242.189] (II) No input driver specified, ignoring this device.
[   242.189] (II) This device may have been added with another device file.
[   242.190] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   242.190] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   242.190] (II) Using input driver 'evdev' for 'Sleep Button'
[   242.190] (**) Sleep Button: always reports core events
[   242.190] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[   242.190] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   242.190] (--) evdev: Sleep Button: Found keys
[   242.190] (II) evdev: Sleep Button: Configuring as keyboard
[   242.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[   242.190] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   242.190] (**) Option "xkb_rules" "evdev"
[   242.190] (**) Option "xkb_model" "pc105"
[   242.190] (**) Option "xkb_layout" "ch"
[   242.190] (**) Option "xkb_variant" "fr"
[   242.190] (II) config/udev: Adding input device HP HP Link-5 Micro Receiver (/dev/input/event0)
[   242.190] (**) HP HP Link-5 Micro Receiver: Applying InputClass "evdev keyboard catchall"
[   242.190] (II) Using input driver 'evdev' for 'HP HP Link-5 Micro Receiver'
[   242.190] (**) HP HP Link-5 Micro Receiver: always reports core events
[   242.190] (**) evdev: HP HP Link-5 Micro Receiver: Device: "/dev/input/event0"
[   242.190] (--) evdev: HP HP Link-5 Micro Receiver: Vendor 0x3f0 Product 0xd407
[   242.190] (--) evdev: HP HP Link-5 Micro Receiver: Found keys
[   242.190] (II) evdev: HP HP Link-5 Micro Receiver: Configuring as keyboard
[   242.191] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:03F0:D407.0001/input/input0/event0"
[   242.191] (II) XINPUT: Adding extended input device "HP HP Link-5 Micro Receiver" (type: KEYBOARD, id 10)
[   242.191] (**) Option "xkb_rules" "evdev"
[   242.191] (**) Option "xkb_model" "pc105"
[   242.191] (**) Option "xkb_layout" "ch"
[   242.191] (**) Option "xkb_variant" "fr"
[   242.191] (II) config/udev: Adding input device HP HP Link-5 Micro Receiver (/dev/input/event1)
[   242.191] (**) HP HP Link-5 Micro Receiver: Applying InputClass "evdev pointer catchall"
[   242.191] (**) HP HP Link-5 Micro Receiver: Applying InputClass "evdev keyboard catchall"
[   242.191] (II) Using input driver 'evdev' for 'HP HP Link-5 Micro Receiver'
[   242.191] (**) HP HP Link-5 Micro Receiver: always reports core events
[   242.191] (**) evdev: HP HP Link-5 Micro Receiver: Device: "/dev/input/event1"
[   242.191] (--) evdev: HP HP Link-5 Micro Receiver: Vendor 0x3f0 Product 0xd407
[   242.191] (--) evdev: HP HP Link-5 Micro Receiver: Found 9 mouse buttons
[   242.191] (--) evdev: HP HP Link-5 Micro Receiver: Found scroll wheel(s)
[   242.191] (--) evdev: HP HP Link-5 Micro Receiver: Found relative axes
[   242.191] (--) evdev: HP HP Link-5 Micro Receiver: Found x and y relative axes
[   242.191] (--) evdev: HP HP Link-5 Micro Receiver: Found absolute axes
[   242.191] (II) evdev: HP HP Link-5 Micro Receiver: Forcing absolute x/y axes to exist.
[   242.191] (--) evdev: HP HP Link-5 Micro Receiver: Found keys
[   242.191] (II) evdev: HP HP Link-5 Micro Receiver: Configuring as mouse
[   242.191] (II) evdev: HP HP Link-5 Micro Receiver: Configuring as keyboard
[   242.191] (II) evdev: HP HP Link-5 Micro Receiver: Adding scrollwheel support
[   242.191] (**) evdev: HP HP Link-5 Micro Receiver: YAxisMapping: buttons 4 and 5
[   242.191] (**) evdev: HP HP Link-5 Micro Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   242.191] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:03F0:D407.0002/input/input1/event1"
[   242.191] (II) XINPUT: Adding extended input device "HP HP Link-5 Micro Receiver" (type: KEYBOARD, id 11)
[   242.191] (**) Option "xkb_rules" "evdev"
[   242.191] (**) Option "xkb_model" "pc105"
[   242.191] (**) Option "xkb_layout" "ch"
[   242.191] (**) Option "xkb_variant" "fr"
[   242.192] (II) evdev: HP HP Link-5 Micro Receiver: initialized for relative axes.
[   242.192] (WW) evdev: HP HP Link-5 Micro Receiver: ignoring absolute axes.
[   242.192] (**) HP HP Link-5 Micro Receiver: (accel) keeping acceleration scheme 1
[   242.192] (**) HP HP Link-5 Micro Receiver: (accel) acceleration profile 0
[   242.192] (**) HP HP Link-5 Micro Receiver: (accel) acceleration factor: 2.000
[   242.192] (**) HP HP Link-5 Micro Receiver: (accel) acceleration threshold: 4
[   242.192] (II) config/udev: Adding input device HP HP Link-5 Micro Receiver (/dev/input/mouse0)
[   242.192] (II) No input driver specified, ignoring this device.
[   242.192] (II) This device may have been added with another device file.
[   242.192] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[   242.192] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   242.192] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   242.192] (**) Logitech USB Receiver: always reports core events
[   242.192] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[   242.192] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   242.192] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   242.192] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   242.192] (--) evdev: Logitech USB Receiver: Found relative axes
[   242.192] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   242.192] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   242.192] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   242.192] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   242.192] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   242.192] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:046D:C52F.0003/input/input6/event6"
[   242.192] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[   242.192] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   242.193] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   242.193] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   242.193] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   242.193] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   242.193] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[   242.193] (II) No input driver specified, ignoring this device.
[   242.193] (II) This device may have been added with another device file.
[   242.193] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[   242.193] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   242.193] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   242.193] (**) Logitech USB Receiver: always reports core events
[   242.193] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[   242.193] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   242.193] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   242.193] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   242.193] (--) evdev: Logitech USB Receiver: Found relative axes
[   242.193] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   242.193] (--) evdev: Logitech USB Receiver: Found absolute axes
[   242.193] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   242.193] (--) evdev: Logitech USB Receiver: Found keys
[   242.193] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   242.193] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   242.193] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   242.193] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   242.193] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   242.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:046D:C52F.0004/input/input7/event7"
[   242.193] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[   242.193] (**) Option "xkb_rules" "evdev"
[   242.193] (**) Option "xkb_model" "pc105"
[   242.193] (**) Option "xkb_layout" "ch"
[   242.193] (**) Option "xkb_variant" "fr"
[   242.193] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   242.194] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   242.194] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   242.194] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   242.194] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   242.194] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   242.194] (II) config/udev: Adding input device FaceTime HD Camera (Built-in) (/dev/input/event14)
[   242.194] (**) FaceTime HD Camera (Built-in): Applying InputClass "evdev keyboard catchall"
[   242.194] (II) Using input driver 'evdev' for 'FaceTime HD Camera (Built-in)'
[   242.194] (**) FaceTime HD Camera (Built-in): always reports core events
[   242.194] (**) evdev: FaceTime HD Camera (Built-in): Device: "/dev/input/event14"
[   242.194] (--) evdev: FaceTime HD Camera (Built-in): Vendor 0x5ac Product 0x8509
[   242.194] (--) evdev: FaceTime HD Camera (Built-in): Found keys
[   242.194] (II) evdev: FaceTime HD Camera (Built-in): Configuring as keyboard
[   242.194] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input14/event14"
[   242.194] (II) XINPUT: Adding extended input device "FaceTime HD Camera (Built-in)" (type: KEYBOARD, id 14)
[   242.194] (**) Option "xkb_rules" "evdev"
[   242.194] (**) Option "xkb_model" "pc105"
[   242.194] (**) Option "xkb_layout" "ch"
[   242.194] (**) Option "xkb_variant" "fr"
[   242.194] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[   242.194] (II) No input driver specified, ignoring this device.
[   242.194] (II) This device may have been added with another device file.
[   242.195] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[   242.195] (II) No input driver specified, ignoring this device.
[   242.195] (II) This device may have been added with another device file.
[   242.195] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[   242.195] (II) No input driver specified, ignoring this device.
[   242.195] (II) This device may have been added with another device file.
[   242.195] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[   242.195] (II) No input driver specified, ignoring this device.
[   242.195] (II) This device may have been added with another device file.
[   242.195] (II) config/udev: Adding input device Apple Computer, Inc. IR Receiver (/dev/input/event16)
[   242.195] (**) Apple Computer, Inc. IR Receiver: Applying InputClass "evdev keyboard catchall"
[   242.195] (II) Using input driver 'evdev' for 'Apple Computer, Inc. IR Receiver'
[   242.195] (**) Apple Computer, Inc. IR Receiver: always reports core events
[   242.195] (**) evdev: Apple Computer, Inc. IR Receiver: Device: "/dev/input/event16"
[   242.195] (--) evdev: Apple Computer, Inc. IR Receiver: Vendor 0x5ac Product 0x8242
[   242.195] (--) evdev: Apple Computer, Inc. IR Receiver: Found keys
[   242.195] (II) evdev: Apple Computer, Inc. IR Receiver: Configuring as keyboard
[   242.195] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.2/4-1.8.2:1.0/0003:05AC:8242.0005/input/input16/event16"
[   242.195] (II) XINPUT: Adding extended input device "Apple Computer, Inc. IR Receiver" (type: KEYBOARD, id 15)
[   242.195] (**) Option "xkb_rules" "evdev"
[   242.195] (**) Option "xkb_model" "pc105"
[   242.195] (**) Option "xkb_layout" "ch"
[   242.195] (**) Option "xkb_variant" "fr"
[   242.196] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event18)
[   242.196] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "evdev keyboard catchall"
[   242.196] (II) Using input driver 'evdev' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[   242.196] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[   242.196] (**) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Device: "/dev/input/event18"
[   242.196] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Vendor 0x5ac Product 0x253
[   242.196] (--) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Found keys
[   242.196] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Configuring as keyboard
[   242.196] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.3/4-1.8.3:1.0/0003:05AC:0253.0006/input/input18/event18"
[   242.196] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 16)
[   242.196] (**) Option "xkb_rules" "evdev"
[   242.196] (**) Option "xkb_model" "pc105"
[   242.196] (**) Option "xkb_layout" "ch"
[   242.196] (**) Option "xkb_variant" "fr"
[   242.197] (II) config/udev: Adding input device bcm5974 (/dev/input/event17)
[   242.197] (**) bcm5974: Applying InputClass "evdev touchpad catchall"
[   242.197] (**) bcm5974: Applying InputClass "touchpad catchall"
[   242.197] (**) bcm5974: Applying InputClass "Default clickpad buttons"
[   242.197] (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[   242.197] (II) LoadModule: "synaptics"
[   242.197] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   242.197] (II) Module synaptics: vendor="X.Org Foundation"
[   242.197]  compiled for 1.16.0.901, module version = 1.8.99
[   242.197]  Module class: X.Org XInput Driver
[   242.197]  ABI class: X.Org XInput driver, version 21.0
[   242.197] (II) Using input driver 'synaptics' for 'bcm5974'
[   242.197] (**) bcm5974: always reports core events
[   242.197] (**) Option "Device" "/dev/input/event17"
[   242.293] (II) synaptics: bcm5974: found clickpad property
[   242.293] (--) synaptics: bcm5974: x-axis range -4750 - 5280 (res 0)
[   242.293] (--) synaptics: bcm5974: y-axis range -150 - 6730 (res 0)
[   242.293] (--) synaptics: bcm5974: pressure range 0 - 256
[   242.293] (--) synaptics: bcm5974: finger width range 0 - 16
[   242.293] (--) synaptics: bcm5974: buttons: left double triple
[   242.293] (--) synaptics: bcm5974: Vendor 0x5ac Product 0x253
[   242.293] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[   242.293] (--) synaptics: bcm5974: touchpad found
[   242.293] (**) bcm5974: always reports core events
[   242.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8.3/4-1.8.3:1.2/input/input17/event17"
[   242.404] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 17)
[   242.404] (**) synaptics: bcm5974: (accel) MinSpeed is now constant deceleration 2.5
[   242.404] (**) synaptics: bcm5974: (accel) MaxSpeed is now 1.75
[   242.404] (**) synaptics: bcm5974: (accel) AccelFactor is now 0.016
[   242.404] (**) bcm5974: (accel) keeping acceleration scheme 1
[   242.404] (**) bcm5974: (accel) acceleration profile 1
[   242.404] (**) bcm5974: (accel) acceleration factor: 2.000
[   242.404] (**) bcm5974: (accel) acceleration threshold: 4
[   242.405] (--) synaptics: bcm5974: touchpad found
[   242.405] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse2)
[   242.405] (**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
[   242.405] (II) config/udev: Adding input device applesmc (/dev/input/event13)
[   242.405] (II) No input driver specified, ignoring this device.
[   242.405] (II) This device may have been added with another device file.
[   242.406] (II) config/udev: Adding input device applesmc (/dev/input/js0)
[   242.406] (II) No input driver specified, ignoring this device.
[   242.406] (II) This device may have been added with another device file.
[   242.406] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[   242.406] (II) No input driver specified, ignoring this device.
[   242.406] (II) This device may have been added with another device file.
[   242.406] (II) config/udev: Adding input device Mouseemu virtual keyboard (/dev/input/event21)
[   242.406] (**) Mouseemu virtual keyboard: Applying InputClass "evdev keyboard catchall"
[   242.406] (II) Using input driver 'evdev' for 'Mouseemu virtual keyboard'
[   242.406] (**) Mouseemu virtual keyboard: always reports core events
[   242.406] (**) evdev: Mouseemu virtual keyboard: Device: "/dev/input/event21"
[   242.406] (--) evdev: Mouseemu virtual keyboard: Vendor 0x1f Product 0x1f
[   242.406] (--) evdev: Mouseemu virtual keyboard: Found keys
[   242.406] (II) evdev: Mouseemu virtual keyboard: Configuring as keyboard
[   242.406] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event21"
[   242.406] (II) XINPUT: Adding extended input device "Mouseemu virtual keyboard" (type: KEYBOARD, id 18)
[   242.406] (**) Option "xkb_rules" "evdev"
[   242.406] (**) Option "xkb_model" "pc105"
[   242.406] (**) Option "xkb_layout" "ch"
[   242.406] (**) Option "xkb_variant" "fr"
[   242.407] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/event22)
[   242.407] (**) Mouseemu virtual mouse: Applying InputClass "evdev pointer catchall"
[   242.407] (II) Using input driver 'evdev' for 'Mouseemu virtual mouse'
[   242.407] (**) Mouseemu virtual mouse: always reports core events
[   242.407] (**) evdev: Mouseemu virtual mouse: Device: "/dev/input/event22"
[   242.407] (--) evdev: Mouseemu virtual mouse: Vendor 0x1f Product 0x1e
[   242.407] (--) evdev: Mouseemu virtual mouse: Found 3 mouse buttons
[   242.407] (--) evdev: Mouseemu virtual mouse: Found scroll wheel(s)
[   242.407] (--) evdev: Mouseemu virtual mouse: Found relative axes
[   242.407] (--) evdev: Mouseemu virtual mouse: Found x and y relative axes
[   242.407] (II) evdev: Mouseemu virtual mouse: Configuring as mouse
[   242.407] (II) evdev: Mouseemu virtual mouse: Adding scrollwheel support
[   242.407] (**) evdev: Mouseemu virtual mouse: YAxisMapping: buttons 4 and 5
[   242.407] (**) evdev: Mouseemu virtual mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   242.407] (**) Option "config_info" "udev:/sys/devices/virtual/input/input22/event22"
[   242.407] (II) XINPUT: Adding extended input device "Mouseemu virtual mouse" (type: MOUSE, id 19)
[   242.407] (II) evdev: Mouseemu virtual mouse: initialized for relative axes.
[   242.407] (**) Mouseemu virtual mouse: (accel) keeping acceleration scheme 1
[   242.407] (**) Mouseemu virtual mouse: (accel) acceleration profile 0
[   242.407] (**) Mouseemu virtual mouse: (accel) acceleration factor: 2.000
[   242.407] (**) Mouseemu virtual mouse: (accel) acceleration threshold: 4
[   242.407] (II) config/udev: Adding input device Mouseemu virtual mouse (/dev/input/mouse4)
[   242.407] (II) No input driver specified, ignoring this device.
[   242.407] (II) This device may have been added with another device file.
[   242.620] (II) intel(0): EDID vendor "APP", prod id 40135
[   242.620] (II) intel(0): Printing DDC gathered Modelines:
[   242.620] (II) intel(0): Modeline "1280x800"x0.0   72.50  1280 1328 1360 1423  800 803 809 846 -hsync -vsync (50.9 kHz eP)
[   243.286] (II) intel(0): EDID vendor "APP", prod id 40135
[   243.286] (II) intel(0): Printing DDC gathered Modelines:
[   243.286] (II) intel(0): Modeline "1280x800"x0.0   72.50  1280 1328 1360 1423  800 803 809 846 -hsync -vsync (50.9 kHz eP)
[   248.987] (II) intel(0): EDID vendor "APP", prod id 40135
[   248.988] (II) intel(0): Printing DDC gathered Modelines:
[   248.988] (II) intel(0): Modeline "1280x800"x0.0   72.50  1280 1328 1360 1423  800 803 809 846 -hsync -vsync (50.9 kHz eP)
[  1827.669] (II) config/udev: removing device Logitech USB Receiver
[  1827.708] (II) evdev: Logitech USB Receiver: Close
[  1827.708] (II) UnloadModule: "evdev"
[  1827.789] (II) config/udev: removing device Logitech USB Receiver
[  1827.816] (II) evdev: Logitech USB Receiver: Close
[  1827.816] (II) UnloadModule: "evdev"
[  1828.358] (II) config/udev: removing device HP HP Link-5 Micro Receiver
[  1828.380] (II) evdev: HP HP Link-5 Micro Receiver: Close
[  1828.380] (II) UnloadModule: "evdev"
[  1828.477] (II) config/udev: removing device HP HP Link-5 Micro Receiver
[  1828.500] (II) evdev: HP HP Link-5 Micro Receiver: Close
[  1828.500] (II) UnloadModule: "evdev"
[  1849.612] (II) evdev: Mouseemu virtual mouse: Close
[  1849.612] (II) UnloadModule: "evdev"
[  1849.612] (II) evdev: Mouseemu virtual keyboard: Close
[  1849.612] (II) UnloadModule: "evdev"
[  1849.612] (II) UnloadModule: "synaptics"
[  1849.612] (II) evdev: Apple Inc. Apple Internal Keyboard / Trackpad: Close
[  1849.612] (II) UnloadModule: "evdev"
[  1849.612] (II) evdev: Apple Computer, Inc. IR Receiver: Close
[  1849.613] (II) UnloadModule: "evdev"
[  1849.613] (II) evdev: FaceTime HD Camera (Built-in): Close
[  1849.613] (II) UnloadModule: "evdev"
[  1849.613] (II) evdev: Sleep Button: Close
[  1849.613] (II) UnloadModule: "evdev"
[  1849.613] (II) evdev: Power Button: Close
[  1849.613] (II) UnloadModule: "evdev"
[  1849.613] (II) evdev: Video Bus: Close
[  1849.613] (II) UnloadModule: "evdev"
[  1849.613] (II) evdev: Power Button: Close
[  1849.613] (II) UnloadModule: "evdev"
[  1850.336] (EE) Server terminated successfully (0). Closing log file.

Hors ligne

#4 16-03-2016 14:35:26

jettero
Membre
Lieu : Lausanne (suisse)
Distrib. : Debian GNU/Linux Bookworm
Noyau : Linux 5.18.0-4-amd64
(G)UI : gdm3
Inscription : 09-03-2016

Re : (RESOLU) Plantage environnement graphique - Ecran secondaire

Problème résolu !

Suis passé en "unstable" et ça a corrigé. C'était manifestement un bug...

Hors ligne

#5 16-03-2016 14:41:53

Dunatotatos
Invité

Re : (RESOLU) Plantage environnement graphique - Ecran secondaire

Haha, tu répares un bug en passant en Sid ! Pourquoi pas...
Sinon, pour info, le log que tu m'as donné est le log de la session graphique sans problème (lancé par startx). Ce qui m'intéresse est le log précédent (Xorg.1.log juste après un crash et une relance de X, ou Xorg.0.log avant de relancer X).

#6 16-03-2016 21:37:42

jettero
Membre
Lieu : Lausanne (suisse)
Distrib. : Debian GNU/Linux Bookworm
Noyau : Linux 5.18.0-4-amd64
(G)UI : gdm3
Inscription : 09-03-2016

Re : (RESOLU) Plantage environnement graphique - Ecran secondaire

Oui....:/ ce n'est pas très catholique je te l'accorde. Mais comme c'est mon outil de travail, je n'ai pas pu attendre plus et j'ai sauté sur la première occasion pour résoudre la chose.

Merci quand même de ton aide et si le problème surgit à nouveau je tâcherais de te donner les infos correctes cette fois-ci.

Hors ligne

Pied de page des forums