Salut tout le monde
J'ai en projet d'installer debian stable 8.5 sur mes ordis, à savoir mon fixe et mon portable.
Mais là il s'agit de mon pc portable que je viens d'acheter d'occaz.
Entre parenthèse, vous me direz une fois que vous aurez vu les infos de mon pc ce que vous en pensez niveau achat, je l'ai acheté d'occaz à une petite boutique près de chez moi, c'était à un particulier avant et le gars de la boutique a changé le disque dur, la dalle, et le clavier (la personne a été bourrin avec son pc, il a du lui racheter pour pas grand chose vu dans l'état où il était quand il la eu), j'en ai eu pour 150€, garantie bien sûr donc au moindre soucis j'irai (et il le sait bien le vendeur/technicien).
Je voudrais, s'il vous plaît, des conseils pour les éventuels firmwares nécessaires, ou savoir s'il peut être pertinent de prendre directement l'iso non officielle qui en inclus plein.
J'ai utilisé le logiciel info4forum (futur info4df) de thuban pour avoir toutes les informations utiles à vous transmettre, via un live-dvd de handy 2.5 fait sur cet ordi, voici le résultat :
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS880 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Caicos HDMI Audio [Radeon HD 6400 Series]
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
06:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
lsusb :
Bus 002 Device 002: ID 0402:9665 ALi Corp. Gateway Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Info matériel :
BIOS Information
Vendor: Phoenix Technologies LTD
Version: V1.15
Release Date: 10/26/2010
Address: 0xE2730
Runtime Size: 121040 bytes
ROM Size: 2048 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
System Information
Manufacturer: Packard Bell
Product Name: EasyNote LM81
Version: V1.15
Serial Number: LXBS602002102B21F52200
UUID: 207DBFF2-D421-E011-9168-E31CC9F16B33
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Processor Information
Socket Designation: Socket S1G4
Type: Central Processor
Family: Sempron M
Manufacturer: AMD
ID: 63 0F 10 00 FF FB 8B 07
Signature: Family 16, Model 6, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
Version: New Processor Technology
Voltage: 1.3 V
External Clock: 200 MHz
Max Speed: 2400 MHz
Current Speed: 2400 MHz
Status: Populated, Enabled
Upgrade: Socket S1
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 1
Core Enabled: 1
Thread Count: 1
Characteristics:
64-bit capable
System Configuration Options
Option 1: J13 1-2 Normal Operation, 2-3 Clear CMOS
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 32 GB
Number Of Devices: 4
Memory Device
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: 1
Locator: S1
Bank Locator: DIMM1
Type: DDR3
Type Detail: Synchronous
Speed: 800 MHz
Manufacturer: 80CE
Serial Number: 9904965E
Asset Tag: 1512
Part Number: M471B5173QH0-YK0
Rank: Unknown
Memory Device
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 2
Locator: S2
Bank Locator: DIMM2
Type: Reserved
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Rank: Unknown
System Boot Information
Status: <OUT OF SPEC>
Système de fichier :
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
aufs 2,0G 101M 1,9G 5% /
tmpfs 810M 8,7M 801M 2% /run
/dev/sr0 1,4G 1,4G 0 100% /lib/live/mount/medium
/dev/loop0 1,2G 1,2G 0 100% /lib/live/mount/rootfs/filesystem.squashfs
tmpfs 2,0G 0 2,0G 0% /lib/live/mount/overlay
devtmpfs 10M 0 10M 0% /dev
tmpfs 2,0G 108K 2,0G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 2,0G 0 2,0G 0% /sys/fs/cgroup
tmpfs 2,0G 20K 2,0G 1% /tmp
tmpfs 405M 12K 405M 1% /run/user/1000
Partitionnement :
Disk /dev/sda: 596,2 GiB, 640135028736 bytes, 1250263728 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xeb0aa9e3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 206847 204800 100M 7 HPFS/NTFS/exFAT
/dev/sda2 206848 1249339391 1249132544 595,6G 7 HPFS/NTFS/exFAT
/dev/sda3 1249339392 1250260991 921600 450M 27 Hidden NTFS WinRE
Disk /dev/loop0: 1,1 GiB, 1224982528 bytes, 2392544 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Réseau :
network/interfaces :
auto lo
iface lo inet loopback
resolv.conf :
# Generated by NetworkManager
nameserver 127.0.0.1
nameserver 192.168.1.1
ifconfig :
eth0 Link encap:Ethernet HWaddr 20:6a:8a:2a:40:6e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interruption:16
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:350 errors:0 dropped:0 overruns:0 frame:0
TX packets:350 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:26164 (25.5 KiB) TX bytes:26164 (25.5 KiB)
wlan0 Link encap:Ethernet HWaddr 1c:65:9d:4c:97:92
inet adr:192.168.1.67 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::1e65:9dff:fe4c:9792/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:216 errors:0 dropped:0 overruns:0 frame:0
TX packets:210 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:92176 (90.0 KiB) TX bytes:23404 (22.8 KiB)
route :
Table de routage IP du noyau
Destination Passerelle Genmask Indic Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 1024 0 0 wlan0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
N'hésitez pas à me donner tout conseils que vous jugerez utile. 
Edit à toto :
Mis la commande lspci en balise Commande user séparée de son retour.
ps : merci à toto.
Dernière modification par bruno-legrand (14-07-2016 16:18:57)
Debian
Debian-France
Debian-Facile
Debian-fr.org
Forum-Debian.fr
Debian ?
Communautés
