logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 08-08-2016 12:55:00

Zelia
Membre
Lieu : Hauts-de-France
Distrib. : DFL10 Buster
Noyau : Linux 4.19.0-10-amd64
(G)UI : XFCE
Inscription : 08-08-2016

[résolu]Nettoyage des têtes d'imprimante

Bonjour à tous
J'ai une imprimante Stylus-D88 dont les têtes ont besoin d'être nettoyées.Sous Windows,je voyais les paramètres de l'imprimante et les niveaux d'encre.Comment faire pour y accèder?
Mon info4 forum

    Informations sur handylinux

Cette page vous permettra de transmettre des informations à propos de votre système pour obtenir de l'aide sur le forum HandyLinux : le texte sera pré-formaté, il vous suffit de "coller" sur le forum.
Vous pouvez l'éditer afin de supprimer les informations inutiles (ou ce paragraphe).

Installation : HandyLinux-2.4 dim. 24 avril 2016

Version : HandyLinux-2.5.1

Kernel : Linux 3.16.0-4-amd64

lspci :
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)

lsusb :
Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 009: ID 13fe:1d00 Kingston Technology Company Inc. DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash Drive
Bus 002 Device 014: ID 04b8:0005 Seiko Epson Corp. Printer
Bus 002 Device 008: ID 0835:8502 Action Star Enterprise Co., Ltd
Bus 002 Device 007: ID 0835:8500 Action Star Enterprise Co., Ltd
Bus 002 Device 013: ID 062a:4101 Creative Labs
Bus 002 Device 005: ID 0835:8501 Action Star Enterprise Co., Ltd
Bus 002 Device 003: ID 0835:8500 Action Star Enterprise Co., Ltd
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Info matériel :
BIOS Information
  Vendor: American Megatrends Inc.
  Version: K53E.216
  Release Date: 09/26/2011
  Address: 0xF0000
  Runtime Size: 64 kB
  ROM Size: 2560 kB
  Characteristics:
    PCI is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    Boot from CD is supported
    Selectable boot is supported
    EDD is supported
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 kB floppy services are supported (int 13h)
    3.5"/2.88 MB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    ACPI is supported
    USB legacy is supported
    Smart battery is supported
    BIOS boot specification is supported
    Targeted content distribution is supported
  BIOS Revision: 4.6

Processor Information
  Socket Designation: CPU 1
  Type: Central Processor
  Family: Core 2 Duo
  Manufacturer: Intel            
  ID: A7 06 02 00 FF FB EB BF
  Signature: Type 0, Family 6, Model 42, Stepping 7
  Flags:
    FPU (Floating-point unit on-chip)
    VME (Virtual mode extension)
    DE (Debugging extension)
    PSE (Page size extension)
    TSC (Time stamp counter)
    MSR (Model specific registers)
    PAE (Physical address extension)
    MCE (Machine check exception)
    CX8 (CMPXCHG8 instruction supported)
    APIC (On-chip APIC hardware supported)
    SEP (Fast system call)
    MTRR (Memory type range registers)
    PGE (Page global enable)
    MCA (Machine check architecture)
    CMOV (Conditional move instruction supported)
    PAT (Page attribute table)
    PSE-36 (36-bit page size extension)
    CLFSH (CLFLUSH instruction supported)
    DS (Debug store)
    ACPI (ACPI supported)
    MMX (MMX technology supported)
    FXSR (FXSAVE and FXSTOR instructions supported)
    SSE (Streaming SIMD extensions)
    SSE2 (Streaming SIMD extensions 2)
    SS (Self-snoop)
    HTT (Multi-threading)
    TM (Thermal monitor supported)
    PBE (Pending break enabled)
  Version: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz      
  Voltage: 0.0 V
  External Clock: 100 MHz
  Max Speed: 4000 MHz
  Current Speed: 2100 MHz
  Status: Populated, Enabled
  Upgrade: Other
  Serial Number: To Be Filled By O.E.M.
  Asset Tag: To Be Filled By O.E.M.
  Part Number: To Be Filled By O.E.M.
  Core Count: 2
  Core Enabled: 1
  Thread Count: 2
  Characteristics:
    64-bit capable

System Configuration Options
  Option 1: DSN:                                

System Boot Information
  Status: No errors detected

System Information
  Manufacturer: ASUSTeK Computer Inc.
  Product Name: K53E
  Version: 1.0      
  Serial Number: B3N0AS55607613B    
  UUID: 0262FD00-5B83-81E0-30F0-F46D040DF4B0
  Wake-up Type: Power Switch
  SKU Number:                      
  Family: K

Physical Memory Array
  Location: System Board Or Motherboard
  Use: System Memory
  Error Correction Type: None
  Maximum Capacity: 32 GB
  Number Of Devices: 4

Memory Device
  Total Width: Unknown
  Data Width: Unknown
  Size: No Module Installed
  Form Factor: DIMM
  Set: None
  Locator: ChannelA-DIMM0
  Bank Locator: BANK 0
  Type: Unknown
  Type Detail: None
  Speed: Unknown
  Manufacturer: [Empty]
  Serial Number: [Empty]
  Asset Tag: 9876543210
  Part Number: [Empty]
  Rank: Unknown

Memory Device
  Total Width: Unknown
  Data Width: Unknown
  Size: No Module Installed
  Form Factor: DIMM
  Set: None
  Locator: ChannelA-DIMM1
  Bank Locator: BANK 1
  Type: Unknown
  Type Detail: None
  Speed: Unknown
  Manufacturer: [Empty]
  Serial Number: [Empty]
  Asset Tag: 9876543210
  Part Number: [Empty]
  Rank: Unknown

Memory Device
  Total Width: 64 bits
  Data Width: 64 bits
  Size: 4096 MB
  Form Factor: SODIMM
  Set: None
  Locator: ChannelB-DIMM0
  Bank Locator: BANK 2
  Type: DDR3
  Type Detail: Synchronous
  Speed: 1333 MHz
  Manufacturer: Samsung
  Serial Number: 623EA186
  Asset Tag: 9876543210
  Part Number: M471B5273CH0-CH9  
  Rank: 2

Memory Device
  Total Width: Unknown
  Data Width: Unknown
  Size: No Module Installed
  Form Factor: DIMM
  Set: None
  Locator: ChannelB-DIMM1
  Bank Locator: BANK 3
  Type: Unknown
  Type Detail: None
  Speed: Unknown
  Manufacturer: [Empty]
  Serial Number: [Empty]
  Asset Tag: 9876543210
  Part Number: [Empty]
  Rank: Unknown

BIOS Language Information
  Language Description Format: Abbreviated
  Installable Languages: 1
    eng
  Currently Installed Language: eng


Écran et affichage :
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.00*+
   1360x768      59.80    59.96  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)

Système de fichier :
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1          451G    8,4G  420G   2% /
udev                10M       0   10M   0% /dev
tmpfs              749M    8,8M  740M   2% /run
tmpfs              1,9G    312K  1,9G   1% /dev/shm
tmpfs              5,0M    4,0K  5,0M   1% /run/lock
tmpfs              1,9G       0  1,9G   0% /sys/fs/cgroup
tmpfs              375M     12K  375M   1% /run/user/1000
/dev/sdb1          478M    4,1M  474M   1% /media/zelia/KINGSTON

Partitionnement :
Disk /dev/sda: 465,8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xd4958453

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 960905215 960903168 458,2G 83 Linux
/dev/sda2       960907262 976771071  15863810   7,6G  5 Extended
/dev/sda5       960907264 976771071  15863808   7,6G 82 Linux swap / Solaris


Disk /dev/sdb: 478 MiB, 501219328 bytes, 978944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000

Device     Boot Start    End Sectors  Size Id Type
/dev/sdb1          32 978943  978912  478M  e W95 FAT16 (LBA)


Réseau :
    network/interfaces :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

    resolv.conf :
# Generated by NetworkManager
nameserver 127.0.0.1
nameserver 212.27.40.241
nameserver 212.27.40.240

    ifconfig :
eth0      Link encap:Ethernet  HWaddr f4:6d:04:0d:f4:b0  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2405 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2405 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:248921 (243.0 KiB)  TX bytes:248921 (243.0 KiB)

wlan0     Link encap:Ethernet  HWaddr 48:5d:60:e7:1b:ef  
          inet adr:82.241.149.21  Bcast:82.241.149.255  Masque:255.255.255.0
          adr inet6: fe80::4a5d:60ff:fee7:1bef/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:147930 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109153 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:186286813 (177.6 MiB)  TX bytes:13501997 (12.8 MiB)


    route :
Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
0.0.0.0         82.241.149.254  0.0.0.0         UG    1024   0        0 wlan0
82.241.149.0    0.0.0.0         255.255.255.0   U     0      0        0 wlan0

Sources :
/etc/apt/sources.list:
##DEBIAN Jessie##
deb http://httpredir.debian.org/debian/ jessie main contrib non-free
#deb-src http://httpredir.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
#deb-src http://security.debian.org/ jessie/updates main contrib non-free
deb http://httpredir.debian.org/debian/ jessie-updates main contrib non-free
#deb-src http://httpredir.debian.org/debian/ jessie-updates main contrib non-free

#deb http://ftp.debian.org/debian/ jessie-backports main contrib non-free
#deb-src http://ftp.debian.org/debian/ jessie-backports main contrib non-free
/etc/apt/sources.list.d/handylinux.list
## HandyLinux Jessie ##
deb http://repo.handylinux.org/debian jessie main
#deb-src http://repo.handylinux.org/debian jessie main

## HandyLinux Testing ## @commenter avant le dernier build
#deb http://repo.handylinux.org/debian testing main
#deb-src http://repo.handylinux.org/debian testing main
/etc/apt/sources.list.d/mozilla.list
## Mozilla ##
deb http://mozilla.debian.net/ jessie-backports firefox-release

 


Merci d'avance de votre aide

Dernière modification par Zelia (09-08-2016 14:33:24)


Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz

Hors ligne

#2 08-08-2016 15:32:41

èfpé
Membre
Inscription : 10-07-2016

Re : [résolu]Nettoyage des têtes d'imprimante

Coucou Zelia,

Il te faut probablement installer un paquet supplémentaire — si ce n'est déjà fait bien sûr — soit le paquet mtink (graphique), soit le paquet escputil (ligne de commande), qui est un utilitaire de maintenance pour les imprimantes Epson Stylus. Pour ce dernier paquet, il faudra peut-être essayer plusieurs commandes ; pour les niveaux d'encre par exemple :

sudo escputil -iur /dev/lp0


ou bien

sudo escputil -iur /dev/usb/lp0


Sources : openprinting.org ; linuxcommand.org

Dernière modification par èfpé (08-08-2016 15:34:04)

Hors ligne

#3 08-08-2016 17:03:43

Zelia
Membre
Lieu : Hauts-de-France
Distrib. : DFL10 Buster
Noyau : Linux 4.19.0-10-amd64
(G)UI : XFCE
Inscription : 08-08-2016

Re : [résolu]Nettoyage des têtes d'imprimante

Merci de ta réponse.
J'ai essayé les 2 commandes mais voilà ce que j'obtiens
Debian + HandyLinux-2 - prenez le contrôle de votre système
zelia@handylinux ~
$ sudo escputil -iur /dev/lp0
[sudo] mot de passe pour zelia :   
sudo: escputil: command not found
zelia@handylinux ~
$ sudo escputil -iur /dev/usb/lp0
sudo: escputil: command not found
zelia@handylinux ~
$ fmcm
No command 'fmcm' found, did you mean:
Command 'fmcs' from package 'python-fmcs' (main)
fmcm: command not found
zelia@handylinux ~
$

Encore une petite aide 59-22a5.gif

Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz

Hors ligne

#4 08-08-2016 17:28:05

èfpé
Membre
Inscription : 10-07-2016

Re : [résolu]Nettoyage des têtes d'imprimante

Re-,

Je t'ai « proposé » deux méthodes, l'une graphique, l'autre en ligne de commande... as-tu commencé par installer (via Synaptic par exemple) le paquet mtink ? les commandes concernent le paquet escputil, l'as-tu installé ? et d'où sort la commande fmcm ?

Hors ligne

#5 08-08-2016 17:59:47

Zelia
Membre
Lieu : Hauts-de-France
Distrib. : DFL10 Buster
Noyau : Linux 4.19.0-10-amd64
(G)UI : XFCE
Inscription : 08-08-2016

Re : [résolu]Nettoyage des têtes d'imprimante

Re
Je préfère la méthode avec la ligne de commande
Tu ne m'as pas préciser d'utiliser Synaptic
Si je comprends bien il faut que j'installe escputil à partir de Synaptic puis les lignes de commande que tu m'as indiquées

Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz

Hors ligne

#6 08-08-2016 22:10:16

èfpé
Membre
Inscription : 10-07-2016

Re : [résolu]Nettoyage des têtes d'imprimante

Bonsoir,

Oui il faut commencer par installer escputil, via la méthode de ton choix ; en ligne de commande :

sudo apt-get update && sudo apt-get install escputil


et pour consulter la page de manuel :

man escputil

Hors ligne

#7 09-08-2016 14:32:30

Zelia
Membre
Lieu : Hauts-de-France
Distrib. : DFL10 Buster
Noyau : Linux 4.19.0-10-amd64
(G)UI : XFCE
Inscription : 08-08-2016

Re : [résolu]Nettoyage des têtes d'imprimante

Bonjour
Merci  èfpé pour tes explications.Ça marche,le nettoyage de têtes est fait
@+

Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz

Hors ligne

Pied de page des forums