logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 01-12-2016 19:01:21

Anonyme-9
Invité

Problème démarrage DebStretch sur N3050

Bonjour, récemment passé sur Stretch (laptop fonctionnait avec deb8.6 kern4.2 intel-drivers8bpo), j'ai un problème de démarrage, donc avec la TUI il y a un blackscreen au démarrage, je met le nomodeset via grub ça fonctionne (ça fonctionne aussi si je met un écran hdmi en parallèle, car même en recovery il y a un blackscreen) donc j'installe ensuite gnome-shell et la blackscreen (même avec le nomodeset, il faut un écran hdmi pour que gnome fonctionne et l'interface s'affiche sur le laptop et sur l’écran)

Concernant les conf/log:


/home/theo/.local/share/xorg/Xorg.0.log
Xorg.0.home.log1 (39,5 Ko)

xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support



/var/lib/gdm3/.local/share/xorg/Xorg.0.log
Xorg.0.var.lib.log (7,8 Ko)

xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
(EE) open /dev/dri/card0: No such file or directory
(EE) open /dev/fb0: Permission denied
(EE) Screen 0 deleted because of no matching config section.
(EE) VESA(0): Cannot read int vect
(EE) Screen(s) found, but none have a usable configuration.
(EE) Fatal server error:
(EE) no screens found(EE)



/var/log/Xorg.0.log (généré lors du Xorg -configure en recovery-mode)
Xorg.0.var.log (6,1 Ko)

/usr/share/doc/xserver-xorg-video-intel/xorg.conf
xorg.conf.txt (93 Octets)

Merci d'avance pour votre aide
-Théo B

TAGs : KMS, DRM

Dernière modification par Anonyme-9 (01-12-2016 19:04:59)

#2 02-12-2016 18:57:22

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

Bonsoir
il te faut supprimer ton /etc/X11/xorg.conf  (idem dans le répertoire /etc/X11/xorg.conf.d/ )
il n est plus utile avec stretch
ton profil n'est pas rempli et je ne sais pas quelle carte vidéo tu a ?
nota: Mate et lightdm moins gourmand en ressources vidéo pour mettre au point ton installation (plutot que gdm3 et gnome )
pour KMS ça dépend de ta carte graphique , et le serveur X va utiliser un driver intel ou nouveau ou radeon  etc ......

un lspci pour connaitre ton materiel et remplir ton profil sur le forum (a priori tu veut utiliser gnome )

préciser si tu a fait une installation neuve ou un dist-upgrade de jessie .

#3 02-12-2016 19:51:31

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Salut, merci pour ta réponse alors concernant la CG j'ai un Intel® HD Graphics et j'ai fais une nouvelle installation directement (avec stretch_di_alpha8)

/#lspci
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 21)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 21)
00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 21)
00:13.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller (rev 21)
00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 21)
00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 21)
00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 21)
00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port (rev 21)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 21)
00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 21)
01:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)

#4 02-12-2016 23:50:25

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

merci pour le profil c est plus facile pour te répondre smile
la distrib c est stretch/sid  et le noyau 4.8  (le reste n est plus installé )
pour savoir ce qu il se passe il faudrait posté ici le /var/log/Xorg.0.log mais sans le nomodeset . hmm

ton cpu => http://ark.intel.com/fr/products/92124/ … o-2_00-GHz

je vais pas pouvoir beaucoup t'aider smile
je ne sais pas si il supporte le modesettings du noyau , le driver xserver-xorg-video-intel , si il y a un firmware non free comme pour le SKY Lake
fait des recherches sur le forum , peut etre sur internet .

ps: avec jessie tu n'a pas eu de problèmes a l installation ?

Dernière modification par anonyme (03-12-2016 00:20:49)

#5 03-12-2016 00:20:00

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Ah ok j'ai mis toute les distribs que j'utilise ... désolé ^^ (mais la oui je suis sur du stretch/4.8)

[   688.186]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[   688.197] X Protocol Version 11, Revision 0
[   688.200] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   688.203] Current Operating System: Linux theo-inspiron-15-3552 4.8.0-1-amd64 #1 SMP Debian 4.8.5-1 (2016-10-28) x86_64
[   688.203] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=a2475362-237f-4ea5-9a8f-acc88019bab9 ro single
[   688.209] Build Date: 06 September 2016  01:32:44PM
[   688.211] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[   688.214] Current version of pixman: 0.34.0
[   688.219]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[   688.219] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   688.230] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 25 00:09:10 2016
[   688.230] (II) Loader magic: 0x55b5f69fadc0
[   688.230] (II) Module ABI versions:
[   688.230]  X.Org ANSI C Emulation: 0.4
[   688.230]  X.Org Video Driver: 20.0
[   688.230]  X.Org XInput driver : 22.1
[   688.230]  X.Org Server Extension : 9.0
[   688.235] (--) using VT number 2

[   688.235] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   688.236] (II) xfree86: Adding drm device (/dev/dri/card0)
[   688.247] (--) PCI:*(0:0:2:0) 8086:22b1:1028:06ac rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   688.253] List of video drivers:
[   688.257]  amdgpu
[   688.260]  ati
[   688.264]  intel
[   688.267]  nouveau
[   688.269]  qxl
[   688.272]  radeon
[   688.274]  fbdev
[   688.277]  modesetting
[   688.279]  vesa
[   688.282]  vmware
[   688.282] (II) LoadModule: "amdgpu"
[   688.282] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[   688.283] (II) Module amdgpu: vendor="X.Org Foundation"
[   688.283]  compiled for 1.18.4, module version = 1.2.0
[   688.283]  Module class: X.Org Video Driver
[   688.283]  ABI class: X.Org Video Driver, version 20.0
[   688.283] (II) LoadModule: "ati"
[   688.283] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   688.283] (II) Module ati: vendor="X.Org Foundation"
[   688.283]  compiled for 1.18.4, module version = 7.8.0
[   688.283]  Module class: X.Org Video Driver
[   688.283]  ABI class: X.Org Video Driver, version 20.0
[   688.283] (II) LoadModule: "intel"
[   688.283] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   688.284] (II) Module intel: vendor="X.Org Foundation"
[   688.284]  compiled for 1.18.4, module version = 2.99.917
[   688.284]  Module class: X.Org Video Driver
[   688.284]  ABI class: X.Org Video Driver, version 20.0
[   688.284] (II) LoadModule: "nouveau"
[   688.284] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   688.284] (II) Module nouveau: vendor="X.Org Foundation"
[   688.284]  compiled for 1.18.4, module version = 1.0.13
[   688.284]  Module class: X.Org Video Driver
[   688.284]  ABI class: X.Org Video Driver, version 20.0
[   688.284] (II) LoadModule: "qxl"
[   688.285] (II) Loading /usr/lib/xorg/modules/drivers/qxl_drv.so
[   688.285] (II) Module qxl: vendor="X.Org Foundation"
[   688.285]  compiled for 1.18.0, module version = 0.1.4
[   688.285]  Module class: X.Org Video Driver
[   688.285]  ABI class: X.Org Video Driver, version 20.0
[   688.285] (II) LoadModule: "radeon"
[   688.285] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   688.285] (II) Module radeon: vendor="X.Org Foundation"
[   688.285]  compiled for 1.18.4, module version = 7.8.0
[   688.285]  Module class: X.Org Video Driver
[   688.285]  ABI class: X.Org Video Driver, version 20.0
[   688.285] (II) LoadModule: "fbdev"
[   688.285] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   688.286] (II) Module fbdev: vendor="X.Org Foundation"
[   688.286]  compiled for 1.18.0, module version = 0.4.4
[   688.286]  Module class: X.Org Video Driver
[   688.286]  ABI class: X.Org Video Driver, version 20.0
[   688.286] (II) LoadModule: "modesetting"
[   688.286] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   688.286] (II) Module modesetting: vendor="X.Org Foundation"
[   688.286]  compiled for 1.18.4, module version = 1.18.4
[   688.286]  Module class: X.Org Video Driver
[   688.286]  ABI class: X.Org Video Driver, version 20.0
[   688.286] (II) LoadModule: "vesa"
[   688.286] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   688.286] (II) Module vesa: vendor="X.Org Foundation"
[   688.286]  compiled for 1.18.0, module version = 2.3.4
[   688.286]  Module class: X.Org Video Driver
[   688.286]  ABI class: X.Org Video Driver, version 20.0
[   688.286] (II) LoadModule: "vmware"
[   688.286] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[   688.319] (II) Module vmware: vendor="X.Org Foundation"
[   688.319]  compiled for 1.18.4, module version = 13.2.1
[   688.319]  Module class: X.Org Video Driver
[   688.319]  ABI class: X.Org Video Driver, version 20.0
[   688.319] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[   688.319] (II) intel(G0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161105-1 (Timo Aaltonen <tjaalton@debian.org>)
[   688.319] (II) intel(G0): SNA compiled for use with valgrind
[   688.320] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   688.320] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[   688.320] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[   688.320] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[   688.320] (WW) Falling back to old probe method for fbdev
[   688.320] (WW) Falling back to old probe method for modesetting
[   688.320] (WW) Falling back to old probe method for vesa
[   688.323] No devices to configure.  Configuration failed.

#6 03-12-2016 00:23:37

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

le résumé est la


[   688.320] (WW) Falling back to old probe method for fbdev
[   688.320] (WW) Falling back to old probe method for modesetting
[   688.320] (WW) Falling back to old probe method for vesa
[   688.323] No devices to configure.  Configuration failed.
 



tu a le grub avec nomodeset ?

ce que je comprend pas c est pourquoi il charge tous les modules (ati , amdgpu nouveau par exemple )

c'est pas le bon log  => [   688.230] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 25 00:09:10 2016   => 25/11/2016

regarde si tu a quelque chose dans le fichier caché  /home/user/.local/share/xorg/Xorg.0.log  (nouveau emplacement avec gdm3 + gnome )

Dernière modification par anonyme (03-12-2016 00:34:01)

#7 03-12-2016 00:58:43

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

J'ai pas le nomodeset et le /var/log/Xorg.0.log à était généré lors du Xorg -configure en recovery-mode du 25/11 et oui j'ai le fichier /home/theo/.local/share/xorg/Xorg.0.log (il date du 24/11 mais j'ai rien changé depuis donc c'est exactement la même chose que actuellement)

[   139.523] (--) Log file renamed from "/home/theo/.local/share/xorg/Xorg.pid-792.log" to "/home/theo/.local/share/xorg/Xorg.0.log"
[   139.524]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[   139.526] X Protocol Version 11, Revision 0
[   139.526] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   139.527] Current Operating System: Linux theo-inspiron-15-3552 4.8.0-1-amd64 #1 SMP Debian 4.8.5-1 (2016-10-28) x86_64
[   139.527] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=a2475362-237f-4ea5-9a8f-acc88019bab9 ro
[   139.528] Build Date: 06 September 2016  01:32:44PM
[   139.529] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[   139.529] Current version of pixman: 0.34.0
[   139.530]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[   139.530] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   139.531] (==) Log file: "/home/theo/.local/share/xorg/Xorg.0.log", Time: Thu Nov 24 23:37:00 2016
[   139.566] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   139.599] (==) No Layout section.  Using the first Screen section.
[   139.599] (==) No screen section available. Using defaults.
[   139.599] (**) |-->Screen "Default Screen Section" (0)
[   139.599] (**) |   |-->Monitor "<default monitor>"
[   139.602] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[   139.602] (==) Automatically adding devices
[   139.602] (==) Automatically enabling devices
[   139.602] (==) Automatically adding GPU devices
[   139.602] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   139.602] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   139.602]  Entry deleted from font path.
[   139.602] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   139.602]  Entry deleted from font path.
[   139.602] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   139.602]  Entry deleted from font path.
[   139.602] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   139.602]  Entry deleted from font path.
[   139.602] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   139.602]  Entry deleted from font path.
[   139.602] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   139.602]  Entry deleted from font path.
[   139.602] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  built-ins
[   139.602] (==) ModulePath set to "/usr/lib/xorg/modules"
[   139.602] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[   139.604] (II) Loader magic: 0x5611b8b0cdc0
[   139.604] (II) Module ABI versions:
[   139.604]  X.Org ANSI C Emulation: 0.4
[   139.604]  X.Org Video Driver: 20.0
[   139.604]  X.Org XInput driver : 22.1
[   139.604]  X.Org Server Extension : 9.0
[   139.609] (++) using VT number 2

[   139.623] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[   139.633] (II) xfree86: Adding drm device (/dev/dri/card0)
[   139.640] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
[   139.643] (--) PCI:*(0:0:2:0) 8086:22b1:1028:06ac rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[   139.645] (II) LoadModule: "glx"
[   139.689] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   139.722] (II) Module glx: vendor="X.Org Foundation"
[   139.722]  compiled for 1.18.4, module version = 1.0.0
[   139.724]  ABI class: X.Org Server Extension, version 9.0
[   139.724] (==) AIGLX enabled
[   139.724] (==) Matched modesetting as autoconfigured driver 0
[   139.724] (==) Matched fbdev as autoconfigured driver 1
[   139.724] (==) Matched vesa as autoconfigured driver 2
[   139.724] (==) Assigned the driver to the xf86ConfigLayout
[   139.724] (II) LoadModule: "modesetting"
[   139.725] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   139.727] (II) Module modesetting: vendor="X.Org Foundation"
[   139.727]  compiled for 1.18.4, module version = 1.18.4
[   139.727]  Module class: X.Org Video Driver
[   139.727]  ABI class: X.Org Video Driver, version 20.0
[   139.727] (II) LoadModule: "fbdev"
[   139.728] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   139.754] (II) Module fbdev: vendor="X.Org Foundation"
[   139.754]  compiled for 1.18.0, module version = 0.4.4
[   139.754]  Module class: X.Org Video Driver
[   139.754]  ABI class: X.Org Video Driver, version 20.0
[   139.754] (II) LoadModule: "vesa"
[   139.755] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   139.755] (II) Module vesa: vendor="X.Org Foundation"
[   139.755]  compiled for 1.18.0, module version = 2.3.4
[   139.755]  Module class: X.Org Video Driver
[   139.756]  ABI class: X.Org Video Driver, version 20.0
[   139.756] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   139.756] (II) FBDEV: driver for framebuffer: fbdev
[   139.756] (II) VESA: driver for VESA chipsets: vesa
[   139.756] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   139.756] (II) modeset(0): using drv /dev/dri/card0
[   139.756] (WW) Falling back to old probe method for fbdev
[   139.756] (II) Loading sub module "fbdevhw"
[   139.756] (II) LoadModule: "fbdevhw"
[   139.757] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   139.769] (II) Module fbdevhw: vendor="X.Org Foundation"
[   139.769]  compiled for 1.18.4, module version = 0.0.2
[   139.769]  ABI class: X.Org Video Driver, version 20.0
[   139.770] (WW) Falling back to old probe method for vesa
[   139.770] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   139.770] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[   139.770] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   139.770] (==) modeset(0): RGB weight 888
[   139.770] (==) modeset(0): Default visual is TrueColor
[   139.770] (II) Loading sub module "glamoregl"
[   139.770] (II) LoadModule: "glamoregl"
[   139.770] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   139.782] (II) Module glamoregl: vendor="X.Org Foundation"
[   139.783]  compiled for 1.18.4, module version = 1.0.0
[   139.783]  ABI class: X.Org ANSI C Emulation, version 0.4
[   139.783] (II) glamor: OpenGL accelerated X.org driver based.
[   139.806] (II) glamor: EGL version 1.4 (DRI2):
[   139.809] (II) modeset(0): glamor initialized
[   139.810] (II) modeset(0): Output eDP-1 has no monitor section
[   139.889] (II) modeset(0): Output DP-1 has no monitor section
[   139.915] (II) modeset(0): Output HDMI-1 has no monitor section
[   140.004] (II) modeset(0): Output DP-2 has no monitor section
[   140.292] (II) modeset(0): Output HDMI-2 has no monitor section
[   140.293] (II) modeset(0): EDID for output eDP-1
[   140.293] (II) modeset(0): Manufacturer: LGD  Model: 484  Serial#: 0
[   140.293] (II) modeset(0): Year: 2014  Week: 0
[   140.293] (II) modeset(0): EDID Version: 1.4
[   140.293] (II) modeset(0): Digital Display Input
[   140.293] (II) modeset(0): 6 bits per channel
[   140.293] (II) modeset(0): Digital interface is DisplayPort
[   140.293] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   140.294] (II) modeset(0): Gamma: 2.20
[   140.294] (II) modeset(0): No DPMS capabilities specified
[   140.294] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   140.294] (II) modeset(0): First detailed timing is preferred mode
[   140.294] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[   140.294] (II) modeset(0): redX: 0.578 redY: 0.344   greenX: 0.337 greenY: 0.571
[   140.294] (II) modeset(0): blueX: 0.159 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   140.294] (II) modeset(0): Manufacturer's mask: 0
[   140.294] (II) modeset(0): Supported detailed timing:
[   140.294] (II) modeset(0): clock: 76.3 MHz   Image Size:  344 x 194 mm
[   140.294] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1610 h_border: 0
[   140.294] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   140.294] (II) modeset(0): Supported detailed timing:
[   140.294] (II) modeset(0): clock: 61.0 MHz   Image Size:  344 x 194 mm
[   140.294] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1610 h_border: 0
[   140.294] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[   140.294] (II) modeset(0):  015J5\80156WHB
[   140.294] (II) modeset(0): Unknown vendor-specific block 0
[   140.294] (II) modeset(0): EDID (in hex):
[   140.294] (II) modeset(0):   00ffffffffffff0030e4840400000000
[   140.294] (II) modeset(0):   00180104952213780a05f59458569228
[   140.294] (II) modeset(0):   1e505400000001010101010101010101
[   140.295] (II) modeset(0):   010101010101d01d56f4500016303020
[   140.295] (II) modeset(0):   350058c21000001ad91756f450001630
[   140.295] (II) modeset(0):   3020350058c21000001a000000fe0030
[   140.295] (II) modeset(0):   31354a35803135365748420a00000000
[   140.295] (II) modeset(0):   00004131940010000009010a20200086
[   140.295] (II) modeset(0): Printing probed modes for output eDP-1
[   140.295] (II) modeset(0): Modeline "1366x768"x60.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   140.295] (II) modeset(0): Modeline "1366x768"x48.0   61.05  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (37.9 kHz e)
[   140.295] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   140.295] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   140.295] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[   140.295] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   140.295] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[   140.296] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[   140.296] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[   140.296] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[   140.296] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[   140.296] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[   140.296] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   140.296] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   140.296] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[   140.296] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[   140.296] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[   140.296] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[   140.296] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[   140.296] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[   140.296] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[   140.296] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   140.296] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[   140.296] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[   140.296] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[   140.296] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[   140.296] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[   140.296] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[   140.296] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[   140.375] (II) modeset(0): EDID for output DP-1
[   140.401] (II) modeset(0): EDID for output HDMI-1
[   140.401] (II) modeset(0): Manufacturer: ACR  Model: 3fa  Serial#: 1112547578
[   140.401] (II) modeset(0): Year: 2014  Week: 25
[   140.401] (II) modeset(0): EDID Version: 1.3
[   140.401] (II) modeset(0): Digital Display Input
[   140.401] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[   140.401] (II) modeset(0): Gamma: 2.20
[   140.401] (II) modeset(0): DPMS capabilities: StandBy Suspend
[   140.401] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   140.401] (II) modeset(0): First detailed timing is preferred mode
[   140.401] (II) modeset(0): redX: 0.641 redY: 0.335   greenX: 0.323 greenY: 0.620
[   140.401] (II) modeset(0): blueX: 0.153 blueY: 0.053   whiteX: 0.312 whiteY: 0.328
[   140.401] (II) modeset(0): Supported established timings:
[   140.401] (II) modeset(0): 720x400@70Hz
[   140.401] (II) modeset(0): 640x480@60Hz
[   140.401] (II) modeset(0): 640x480@67Hz
[   140.401] (II) modeset(0): 640x480@72Hz
[   140.401] (II) modeset(0): 640x480@75Hz
[   140.402] (II) modeset(0): 800x600@56Hz
[   140.402] (II) modeset(0): 800x600@60Hz
[   140.402] (II) modeset(0): 800x600@72Hz
[   140.402] (II) modeset(0): 800x600@75Hz
[   140.402] (II) modeset(0): 832x624@75Hz
[   140.402] (II) modeset(0): 1024x768@60Hz
[   140.402] (II) modeset(0): 1024x768@70Hz
[   140.402] (II) modeset(0): 1024x768@75Hz
[   140.402] (II) modeset(0): 1280x1024@75Hz
[   140.402] (II) modeset(0): 1152x864@75Hz
[   140.402] (II) modeset(0): Manufacturer's mask: 0
[   140.402] (II) modeset(0): Supported standard timings:
[   140.402] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   140.402] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   140.403] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   140.403] (II) modeset(0): #3: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   140.403] (II) modeset(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   140.403] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   140.403] (II) modeset(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   140.403] (II) modeset(0): #7: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[   140.403] (II) modeset(0): Supported detailed timing:
[   140.403] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[   140.403] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   140.403] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   140.403] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 175 MHz
[   140.403] (II) modeset(0): Monitor name: G247HL
[   140.403] (II) modeset(0): Serial No: T0VEE0018540
[   140.404] (II) modeset(0): Supported detailed timing:
[   140.404] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[   140.404] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   140.404] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   140.404] (II) modeset(0): Supported detailed timing:
[   140.404] (II) modeset(0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[   140.404] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   140.404] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[   140.404] (II) modeset(0): Supported detailed timing:
[   140.405] (II) modeset(0): clock: 74.2 MHz   Image Size:  531 x 299 mm
[   140.405] (II) modeset(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[   140.405] (II) modeset(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[   140.405] (II) modeset(0): Supported detailed timing:
[   140.405] (II) modeset(0): clock: 27.0 MHz   Image Size:  531 x 299 mm
[   140.405] (II) modeset(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[   140.405] (II) modeset(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[   140.405] (II) modeset(0): Number of EDID sections to follow: 1
[   140.405] (II) modeset(0): EDID (in hex):
[   140.405] (II) modeset(0):   00ffffffffffff000472fa03fa205042
[   140.405] (II) modeset(0):   1918010380351e78ca3f60a455529e27
[   140.405] (II) modeset(0):   0d5054bfef80714f8140818081c08100
[   140.406] (II) modeset(0):   9500b300d1c0023a801871382d40582c
[   140.406] (II) modeset(0):   4500132b2100001e000000fd00384c1f
[   140.406] (II) modeset(0):   5011000a202020202020000000fc0047
[   140.406] (II) modeset(0):   323437484c0a202020202020000000ff
[   140.406] (II) modeset(0):   005430564545303031383534300a01e9
[   140.406] (II) modeset(0):   020324f14f9002030405060701111213
[   140.406] (II) modeset(0):   1415161f230907078301000067030c00
[   140.406] (II) modeset(0):   1000382d023a801871382d40582c4500
[   140.406] (II) modeset(0):   132b2100001f011d8018711c1620582c
[   140.406] (II) modeset(0):   2500132b2100009f011d007251d01e20
[   140.406] (II) modeset(0):   6e285500132b2100001e8c0ad08a20e0
[   140.407] (II) modeset(0):   2d10103e9600132b2100001800000000
[   140.407] (II) modeset(0):   0000000000000000000000000000007e
[   140.407] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   140.407] (II) modeset(0): Printing probed modes for output HDMI-1
[   140.407] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   140.407] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[   140.407] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[   140.407] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[   140.407] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[   140.408] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[   140.408] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[   140.408] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   140.408] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   140.408] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[   140.408] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   140.408] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[   140.408] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   140.408] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   140.409] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[   140.409] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[   140.409] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   140.409] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   140.409] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   140.409] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   140.409] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   140.409] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   140.409] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   140.409] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   140.409] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[   140.409] (II) modeset(0): Modeline "720x576i"x50.0   13.50  720 732 795 864  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[   140.410] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   140.410] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[   140.410] (II) modeset(0): Modeline "720x480i"x60.0   13.51  720 739 801 858  480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[   140.410] (II) modeset(0): Modeline "720x480i"x59.9   13.50  720 739 801 858  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[   140.410] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   140.410] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   140.410] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   140.410] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   140.410] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   140.410] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   140.505] (II) modeset(0): EDID for output DP-2
[   140.792] (II) modeset(0): EDID for output HDMI-2
[   140.792] (II) modeset(0): Output eDP-1 connected
[   140.792] (II) modeset(0): Output DP-1 disconnected
[   140.792] (II) modeset(0): Output HDMI-1 connected
[   140.792] (II) modeset(0): Output DP-2 disconnected
[   140.792] (II) modeset(0): Output HDMI-2 disconnected
[   140.792] (II) modeset(0): Using spanning desktop for initial modes
[   140.792] (II) modeset(0): Output eDP-1 using initial mode 1366x768 +0+0
[   140.792] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[   140.792] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   140.792] (==) modeset(0): DPI set to (96, 96)
[   140.792] (II) Loading sub module "fb"
[   140.792] (II) LoadModule: "fb"
[   140.793] (II) Loading /usr/lib/xorg/modules/libfb.so
[   140.794] (II) Module fb: vendor="X.Org Foundation"
[   140.794]  compiled for 1.18.4, module version = 1.0.0
[   140.794]  ABI class: X.Org ANSI C Emulation, version 0.4
[   140.794] (II) UnloadModule: "fbdev"
[   140.794] (II) Unloading fbdev
[   140.794] (II) UnloadSubModule: "fbdevhw"
[   140.795] (II) Unloading fbdevhw
[   140.795] (II) UnloadModule: "vesa"
[   140.795] (II) Unloading vesa
[   140.795] (==) Depth 24 pixmap format is 32 bpp
[   140.975] (==) modeset(0): Backing store enabled
[   140.975] (==) modeset(0): Silken mouse enabled
[   140.976] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   141.059] (==) modeset(0): DPMS enabled
[   141.060] (II) modeset(0): [DRI2] Setup complete
[   141.060] (II) modeset(0): [DRI2]   DRI driver: i965
[   141.060] (II) modeset(0): [DRI2]   VDPAU driver: i965
[   142.550] (--) RandR disabled
[   142.576] (II) SELinux: Disabled on system
[   142.591] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   142.591] (II) AIGLX: enabled GLX_ARB_create_context
[   142.591] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   142.591] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[   142.591] (II) AIGLX: enabled GLX_INTEL_swap_event
[   142.592] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   142.592] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   142.592] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   142.592] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   142.592] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   142.592] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   142.592] (II) AIGLX: Loaded and initialized i965
[   142.592] (II) GLX: Initialized DRI2 GL provider for screen 0
[   142.686] (II) modeset(0): Damage tracking initialized
[   142.686] (II) modeset(0): Setting screen physical size to 869 x 285
[   142.791] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[   142.791] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   142.791] (II) LoadModule: "libinput"
[   142.791] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   142.825] (II) Module libinput: vendor="X.Org Foundation"
[   142.825]  compiled for 1.18.4, module version = 0.22.0
[   142.825]  Module class: X.Org XInput Driver
[   142.825]  ABI class: X.Org XInput driver, version 22.1
[   142.826] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 13 paused 0
[   142.826] (II) Using input driver 'libinput' for 'Power Button'
[   142.826] (**) Power Button: always reports core events
[   142.826] (**) Option "Device" "/dev/input/event5"
[   142.826] (**) Option "_source" "server/udev"
[   142.827] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[   142.827] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[   142.828] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[   142.828] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   142.828] (**) Option "xkb_model" "pc105"
[   142.828] (**) Option "xkb_layout" "fr"
[   142.828] (**) Option "xkb_variant" "latin9"
[   142.880] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[   142.880] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[   142.881] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[   142.881] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   142.882] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 16 paused 0
[   142.882] (II) Using input driver 'libinput' for 'Video Bus'
[   142.882] (**) Video Bus: always reports core events
[   142.882] (**) Option "Device" "/dev/input/event8"
[   142.882] (**) Option "_source" "server/udev"
[   142.883] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[   142.883] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[   142.883] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event8"
[   142.883] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   142.883] (**) Option "xkb_model" "pc105"
[   142.883] (**) Option "xkb_layout" "fr"
[   142.883] (**) Option "xkb_variant" "latin9"
[   142.884] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[   142.884] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[   142.885] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   142.885] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   142.886] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
[   142.886] (II) Using input driver 'libinput' for 'Power Button'
[   142.886] (**) Power Button: always reports core events
[   142.886] (**) Option "Device" "/dev/input/event3"
[   142.886] (**) Option "_source" "server/udev"
[   142.887] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[   142.887] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[   142.887] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[   142.887] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   142.887] (**) Option "xkb_model" "pc105"
[   142.887] (**) Option "xkb_layout" "fr"
[   142.887] (**) Option "xkb_variant" "latin9"
[   142.888] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[   142.888] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[   142.889] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   142.889] (II) No input driver specified, ignoring this device.
[   142.889] (II) This device may have been added with another device file.
[   142.890] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[   142.890] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   142.891] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 18 paused 0
[   142.891] (II) Using input driver 'libinput' for 'Sleep Button'
[   142.891] (**) Sleep Button: always reports core events
[   142.891] (**) Option "Device" "/dev/input/event4"
[   142.891] (**) Option "_source" "server/udev"
[   142.891] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   142.891] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   142.892] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[   142.892] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   142.892] (**) Option "xkb_model" "pc105"
[   142.892] (**) Option "xkb_layout" "fr"
[   142.892] (**) Option "xkb_variant" "latin9"
[   142.893] (II) input device 'Sleep Button', /dev/input/event4 is tagged by udev as: Keyboard
[   142.893] (II) input device 'Sleep Button', /dev/input/event4 is a keyboard
[   142.895] (II) config/udev: Adding input device Integrated_Webcam_HD (/dev/input/event13)
[   142.895] (**) Integrated_Webcam_HD: Applying InputClass "libinput keyboard catchall"
[   142.896] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 19 paused 0
[   142.896] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD'
[   142.896] (**) Integrated_Webcam_HD: always reports core events
[   142.896] (**) Option "Device" "/dev/input/event13"
[   142.896] (**) Option "_source" "server/udev"
[   142.897] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is tagged by udev as: Keyboard
[   142.897] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is a keyboard
[   142.897] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14/event13"
[   142.897] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD" (type: KEYBOARD, id 10)
[   142.897] (**) Option "xkb_model" "pc105"
[   142.897] (**) Option "xkb_layout" "fr"
[   142.897] (**) Option "xkb_variant" "latin9"
[   142.898] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is tagged by udev as: Keyboard
[   142.898] (II) input device 'Integrated_Webcam_HD', /dev/input/event13 is a keyboard
[   142.899] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[   142.899] (II) No input driver specified, ignoring this device.
[   142.899] (II) This device may have been added with another device file.
[   142.900] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[   142.900] (II) No input driver specified, ignoring this device.
[   142.900] (II) This device may have been added with another device file.
[   142.900] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[   142.900] (II) No input driver specified, ignoring this device.
[   142.900] (II) This device may have been added with another device file.
[   142.901] (II) config/udev: Adding input device DLL06AC:00 06CB:78F1 (/dev/input/event9)
[   142.901] (**) DLL06AC:00 06CB:78F1: Applying InputClass "libinput touchpad catchall"
[   143.018] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 20 paused 0
[   143.018] (II) Using input driver 'libinput' for 'DLL06AC:00 06CB:78F1'
[   143.018] (**) DLL06AC:00 06CB:78F1: always reports core events
[   143.019] (**) Option "Device" "/dev/input/event9"
[   143.019] (**) Option "_source" "server/udev"
[   143.023] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event9 is tagged by udev as: Touchpad
[   143.024] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event9 is a touchpad
[   143.026] (**) Option "config_info" "udev:/sys/devices/pci0000:00/808622C1:00/i2c-0/i2c-DLL06AC:00/0018:06CB:78F1.0001/input/input10/event9"
[   143.026] (II) XINPUT: Adding extended input device "DLL06AC:00 06CB:78F1" (type: TOUCHPAD, id 11)
[   143.030] (**) Option "AccelerationScheme" "none"
[   143.030] (**) DLL06AC:00 06CB:78F1: (accel) selected scheme none/0
[   143.030] (**) DLL06AC:00 06CB:78F1: (accel) acceleration factor: 2.000
[   143.030] (**) DLL06AC:00 06CB:78F1: (accel) acceleration threshold: 4
[   143.032] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event9 is tagged by udev as: Touchpad
[   143.032] (II) input device 'DLL06AC:00 06CB:78F1', /dev/input/event9 is a touchpad
[   143.034] (II) config/udev: Adding input device DLL06AC:00 06CB:78F1 (/dev/input/mouse1)
[   143.034] (II) No input driver specified, ignoring this device.
[   143.034] (II) This device may have been added with another device file.
[   143.037] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   143.037] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   143.040] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 21 paused 0
[   143.040] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   143.040] (**) AT Translated Set 2 keyboard: always reports core events
[   143.040] (**) Option "Device" "/dev/input/event0"
[   143.040] (**) Option "_source" "server/udev"
[   143.041] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   143.042] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   143.042] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   143.042] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   143.042] (**) Option "xkb_model" "pc105"
[   143.042] (**) Option "xkb_layout" "fr"
[   143.042] (**) Option "xkb_variant" "latin9"
[   143.044] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   143.044] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   143.045] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[   143.046] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[   143.047] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[   143.047] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[   143.048] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   143.048] (**) Option "Device" "/dev/input/event1"
[   143.048] (**) Option "_source" "server/udev"
[   143.049] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[   143.049] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[   143.049] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[   143.050] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   143.051] (**) Option "AccelerationScheme" "none"
[   143.051] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[   143.051] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   143.051] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   143.052] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[   143.052] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[   143.053] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   143.053] (II) No input driver specified, ignoring this device.
[   143.053] (II) This device may have been added with another device file.
[   143.054] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   143.054] (II) No input driver specified, ignoring this device.
[   143.054] (II) This device may have been added with another device file.
[   143.055] (II) config/udev: Adding input device DELL Wireless hotkeys (/dev/input/event6)
[   143.055] (**) DELL Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[   143.057] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 23 paused 0
[   143.057] (II) Using input driver 'libinput' for 'DELL Wireless hotkeys'
[   143.057] (**) DELL Wireless hotkeys: always reports core events
[   143.057] (**) Option "Device" "/dev/input/event6"
[   143.057] (**) Option "_source" "server/udev"
[   143.058] (II) input device 'DELL Wireless hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[   143.058] (II) input device 'DELL Wireless hotkeys', /dev/input/event6 is a keyboard
[   143.058] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[   143.058] (II) XINPUT: Adding extended input device "DELL Wireless hotkeys" (type: KEYBOARD, id 14)
[   143.058] (**) Option "xkb_model" "pc105"
[   143.058] (**) Option "xkb_layout" "fr"
[   143.058] (**) Option "xkb_variant" "latin9"
[   143.059] (II) input device 'DELL Wireless hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[   143.060] (II) input device 'DELL Wireless hotkeys', /dev/input/event6 is a keyboard
[   145.716] (II) modeset(0): EDID vendor "LGD", prod id 1156
[   145.716] (II) modeset(0): Printing DDC gathered Modelines:
[   145.716] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   145.717] (II) modeset(0): Modeline "1366x768"x0.0   61.05  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (37.9 kHz e)
[   145.824] (--) modeset(0): HDMI max TMDS frequency 225000KHz
[   153.709] (II) modeset(0): EDID vendor "LGD", prod id 1156
[   153.709] (II) modeset(0): Printing DDC gathered Modelines:
[   153.709] (II) modeset(0): Modeline "1366x768"x0.0   76.32  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (47.4 kHz eP)
[   153.709] (II) modeset(0): Modeline "1366x768"x0.0   61.05  1366 1414 1446 1610  768 771 776 790 +hsync -vsync (37.9 kHz e)
[   153.818] (--) modeset(0): HDMI max TMDS frequency 225000KHz

Dernière modification par Anonyme-9 (03-12-2016 01:00:27)

#8 03-12-2016 01:05:47

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

a priori cela fonctionne d'aprés le log ci dessus ?
note le chemin pour la suite du log Xorg.0.log , pour mate + lightdm il est toujours sous /var/log/Xorg.0.log


[   142.591] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   142.591] (II) AIGLX: enabled GLX_ARB_create_context
[   142.591] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   142.591] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile  
[   142.591] (II) AIGLX: enabled GLX_INTEL_swap_event
[   142.592] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   142.592] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   142.592] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   142.592] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[   142.592] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   142.592] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   142.592] (II) AIGLX: Loaded and initialized i965
[   142.592] (II) GLX: Initialized DRI2 GL provider for screen 0
 



ton bureau gnome ne fonctionne pas ?

tu a allumé le portable a 23h37 le 24 novembre 2016 ?  et jamais éteint , quelque chose ne va pas tongue  (on est le 03/12/2016)


[   139.531] (==) Log file: "/home/theo/.local/share/xorg/Xorg.0.log", Time: Thu Nov 24 23:37:00 2016
 



ton post d avant il est du 25/11 et le serveur X plante , tu ne nous dit pas tout roll  wink
le 25/11 le chemin du log a changé donc plus sous gdm3 / gnome
la c est gdm3 qui a lancé le serveur X


[   139.523] (--) Log file renamed from "/home/theo/.local/share/xorg/Xorg.pid-792.log" to "/home/theo/.local/share/xorg/Xorg.0.log"
 

Dernière modification par anonyme (03-12-2016 01:21:55)

#9 03-12-2016 12:39:14

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Je sais que rien est logique mais c'est comme ça que ça se passe dans ce pc ^^ Et si je l'ai éteint entre le 24/11 et aujourd'hui mais je l'ai pas rallumé et même les log xorg ne change pas (elle n'est pas modifié par le redémarrage, aujourd’hui les log affiche 24/11). Le problème date de l'installation, il n'est pas venu après. La GUI et la TUI ont le même problème (blackscreen) donc pour la TUI je met le nomodeset pour que ça fonctionne mais ça ne fais rien pour la GUI donc j’enlève le nomodeset et je branche la sortie hdmi du PC sur un écran et la tous fonctionne (TUI & GUI) Mais un pc portable avec un écran en permanence branché à coté, c'est pas pratique hmm .

#10 03-12-2016 15:03:57

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

Désolé mais blackscreen , GUI et TUI ne font pas partie de mon vocabulaire tongue wink
moi ce que je constate c est un log correct avec ton écran du portable , a tu fais des modifications entre temps
tu parle de xorg.conf , stretch ne créer pas ce fichier d ou il sort ?
j'ai du mal a comprendre et te donner une solution correcte au problème que tu expose.
pour le fichier Xorg.0.log , il y a 3 emplacements possible , dans le dossier /var/lib/gdm3/.local/ , le dossier /var/log/ et le dossier /home/user/.local/
il doit etre daté du dernier démarrage du portable .

Dernière modification par anonyme (03-12-2016 15:07:32)

#11 03-12-2016 16:27:59

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Ah oui désolé hmm alors GUI = Interface Graphique (gnome-shell), TUI = Interface Texte (bash) et blackscreen = écran noir.

Donc la je viens de réinstaller debien stretch (avec cette image : firmware-stretch-DI-alpha8-amd64-netinst.iso), je l'ai installer sans gnome pour l'instant.
-L'ordinateur redémarre après l'installation mais lors du démarrage, il bloque sur un écran noir.
-Je redémarre et je met grub en nomodeset et j’enlève quiet. La l'ordinateur démarre comme il faut, je me connecte, la je change les dépôts, je fais les maj. Il y a une erreur qui revient souvent c'est 'impossible d’évaluer '/etc/modprobe.d/*': Aucun fichier ou dossier de ce type'.

A tu besoin de log a ce niveau la du problème ? (Il n'y a pas encore gnome-shell et Xorg)

#12 04-12-2016 01:22:33

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

Bonsoir
a tu décoché la première ligne lors de "l installation de logiciel" (en dessous tu a bureau gnome etc) , si tu la pas fait il installe gnome par défaut
a tu la main par Ctrl+Alt+F1 qui te donne une invite de logging en console pure ?

nota: pour ceci "impossible d’évaluer '/etc/modprobe.d/*': Aucun fichier ou dossier de ce type" ce n est pas un problème , message informatif

#13 04-12-2016 11:52:17

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Oui j'ai décoché l'installation de l’environnement gnome lors de installation, et quand je démarre je suis obligé de mettre grub en nomodeset ensuite atterrie sur le console tty1 (Cttl+Alt+F1) mais je peux ensuite aller que sur la tty4 (Cttl+Alt+F4) et je ne peux pas revenir sur la première (ça affiche des caractère comme ça : ^[[25~ )

#14 04-12-2016 18:49:49

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Le nomodeset il désactive quoi (quel modules) exactement dans le noyau ? scratchhead.gif

Dernière modification par Anonyme-9 (04-12-2016 18:58:15)

#15 04-12-2016 19:09:53

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Car l'ordinateur affiche l'écran noir juste après c'est deux lignes :

[drm] Memory usable by graphics device = 2048M
fb: switching to inteldrmfb from simple

#16 04-12-2016 21:35:53

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Et la je viens d'installer gnome puis je démarre en nomodeset mais la s'affiche un écran noir lors du démarrage, le vais cherché les logs Xorg en mode recovery et nomodeset, je fais un locate Xorg et je trouve que les logs sont dans /var/lib/gdm3/.local/share/xorg/Xorg.0.log

[    95.224] (--) Log file renamed from "/var/lib/gdm3/.local/share/xorg/Xorg.pid-3649.log" to "/var/lib/gdm3/.local/share/xorg/Xorg.0.log"
[    95.225]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    95.225] X Protocol Version 11, Revision 0
[    95.225] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    95.225] Current Operating System: Linux theo-inspiron-15-3552-1 4.8.0-1-amd64 #1 SMP Debian 4.8.7-1 (2016-11-13) x86_64
[    95.225] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=6a7a96a2-44b4-45f4-9690-9d3a45acf61a ro nomodeset
[    95.225] Build Date: 06 September 2016  01:32:44PM
[    95.225] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[    95.226] Current version of pixman: 0.34.0
[    95.226]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    95.226] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    95.226] (==) Log file: "/var/lib/gdm3/.local/share/xorg/Xorg.0.log", Time: Sun Dec  4 20:31:52 2016
[    95.226] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    95.227] (==) No Layout section.  Using the first Screen section.
[    95.227] (==) No screen section available. Using defaults.
[    95.227] (**) |-->Screen "Default Screen Section" (0)
[    95.227] (**) |   |-->Monitor "<default monitor>"
[    95.227] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    95.227] (==) Automatically adding devices
[    95.227] (==) Automatically enabling devices
[    95.228] (==) Automatically adding GPU devices
[    95.228] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    95.228] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    95.228]  Entry deleted from font path.
[    95.228] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    95.228]  Entry deleted from font path.
[    95.228] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    95.228]  Entry deleted from font path.
[    95.228] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[    95.228]  Entry deleted from font path.
[    95.228] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    95.228]  Entry deleted from font path.
[    95.228] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    95.228]  Entry deleted from font path.
[    95.228] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  built-ins
[    95.228] (==) ModulePath set to "/usr/lib/xorg/modules"
[    95.228] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    95.228] (II) Loader magic: 0x55e612550dc0
[    95.228] (II) Module ABI versions:
[    95.228]  X.Org ANSI C Emulation: 0.4
[    95.228]  X.Org Video Driver: 20.0
[    95.228]  X.Org XInput driver : 22.1
[    95.228]  X.Org Server Extension : 9.0
[    95.230] (++) using VT number 1

[    95.236] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c125
[    95.238] (--) PCI:*(0:0:2:0) 8086:22b1:1028:06ac rev 33, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    95.238] (II) LoadModule: "glx"
[    95.238] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    95.241] (II) Module glx: vendor="X.Org Foundation"
[    95.241]  compiled for 1.18.4, module version = 1.0.0
[    95.241]  ABI class: X.Org Server Extension, version 9.0
[    95.241] (==) AIGLX enabled
[    95.241] (==) Matched modesetting as autoconfigured driver 0
[    95.241] (==) Matched fbdev as autoconfigured driver 1
[    95.241] (==) Matched vesa as autoconfigured driver 2
[    95.241] (==) Assigned the driver to the xf86ConfigLayout
[    95.241] (II) LoadModule: "modesetting"
[    95.241] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    95.242] (II) Module modesetting: vendor="X.Org Foundation"
[    95.242]  compiled for 1.18.4, module version = 1.18.4
[    95.242]  Module class: X.Org Video Driver
[    95.242]  ABI class: X.Org Video Driver, version 20.0
[    95.242] (II) LoadModule: "fbdev"
[    95.242] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    95.242] (II) Module fbdev: vendor="X.Org Foundation"
[    95.242]  compiled for 1.18.0, module version = 0.4.4
[    95.242]  Module class: X.Org Video Driver
[    95.242]  ABI class: X.Org Video Driver, version 20.0
[    95.242] (II) LoadModule: "vesa"
[    95.243] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    95.243] (II) Module vesa: vendor="X.Org Foundation"
[    95.243]  compiled for 1.18.0, module version = 2.3.4
[    95.243]  Module class: X.Org Video Driver
[    95.243]  ABI class: X.Org Video Driver, version 20.0
[    95.243] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    95.243] (II) FBDEV: driver for framebuffer: fbdev
[    95.243] (II) VESA: driver for VESA chipsets: vesa
[    95.243] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    95.243] (EE) open /dev/dri/card0: No such file or directory
[    95.243] (WW) Falling back to old probe method for modesetting
[    95.243] (EE) open /dev/dri/card0: No such file or directory
[    95.243] (II) Loading sub module "fbdevhw"
[    95.243] (II) LoadModule: "fbdevhw"
[    95.243] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    95.244] (II) Module fbdevhw: vendor="X.Org Foundation"
[    95.244]  compiled for 1.18.4, module version = 0.0.2
[    95.244]  ABI class: X.Org Video Driver, version 20.0
[    95.244] (EE) open /dev/fb0: Permission denied
[    95.244] (WW) Falling back to old probe method for fbdev
[    95.244] (II) Loading sub module "fbdevhw"
[    95.244] (II) LoadModule: "fbdevhw"
[    95.244] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    95.244] (II) Module fbdevhw: vendor="X.Org Foundation"
[    95.244]  compiled for 1.18.4, module version = 0.0.2
[    95.244]  ABI class: X.Org Video Driver, version 20.0
[    95.244] (EE) open /dev/fb0: Permission denied
[    95.244] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    95.244] (EE) Screen 0 deleted because of no matching config section.
[    95.244] (II) UnloadModule: "modesetting"
[    95.244] (EE) Screen 0 deleted because of no matching config section.
[    95.244] (II) UnloadModule: "fbdev"
[    95.244] (II) UnloadSubModule: "fbdevhw"
[    95.244] (II) Loading sub module "vbe"
[    95.244] (II) LoadModule: "vbe"
[    95.245] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    95.245] (II) Module vbe: vendor="X.Org Foundation"
[    95.245]  compiled for 1.18.4, module version = 1.1.0
[    95.245]  ABI class: X.Org Video Driver, version 20.0
[    95.245] (II) Loading sub module "int10"
[    95.245] (II) LoadModule: "int10"
[    95.245] (II) Loading /usr/lib/xorg/modules/libint10.so
[    95.245] (II) Module int10: vendor="X.Org Foundation"
[    95.245]  compiled for 1.18.4, module version = 1.0.0
[    95.245]  ABI class: X.Org Video Driver, version 20.0
[    95.245] (II) VESA(0): initializing int10
[    95.246] (EE) VESA(0): Cannot read int vect
[    95.246] (II) UnloadModule: "vesa"
[    95.246] (II) UnloadSubModule: "int10"
[    95.246] (II) Unloading int10
[    95.246] (II) UnloadSubModule: "vbe"
[    95.246] (II) Unloading vbe
[    95.246] (EE) Screen(s) found, but none have a usable configuration.
[    95.246] (EE)
Fatal server error:
[    95.246] (EE) no screens found(EE)
[    95.246] (EE)
Please consult the The X.Org Foundation support
   at http://wiki.x.org
 for help.
[    95.247] (EE) Please also check the log file at "/var/lib/gdm3/.local/share/xorg/Xorg.0.log" for additional information.
[    95.247] (EE)
[    95.255] (EE) Server terminated with error (1). Closing log file.

#17 05-12-2016 04:01:16

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

Bonsoir
j' utilise pas nomodeset , je me suis jamais penché sur ce qu il fait exactement.
tu a un probleme avec le noyau 4.8 actuel , peut etre revenir a jessie
pourquoi tu a voulu passer a stretch ? , des problèmes avec jessie ou pour avoir des logiciels plus récent .

#18 05-12-2016 07:14:17

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Salut,
Oui sur ce PC jessie fonctionne mais j'avais du installer ce noyau http://kernel.ubuntu.com/~kernel-ppa/ma … -unstable/ et aussi installer les drivers xorg intel du jessie backports.
Et oui je voulais passer a stretch pour les outils plus récents et aussi car ça s'apparente plus a une rolling-release ... que jessie du moins ^^

#19 05-12-2016 15:46:33

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Mais le dernier fichier de log que j'ai publié il ne t'évoque rien (moi je ne m'y connais pas trop dans le fonctionnent de X hmm )? Notamment ça :

[    95.245] (II) VESA(0): initializing int10
[    95.246] (EE) VESA(0): Cannot read int vect
[    95.246] (II) UnloadModule: "vesa"
[    95.246] (II) UnloadSubModule: "int10"
[    95.246] (II) Unloading int10
[    95.246] (II) UnloadSubModule: "vbe"
[    95.246] (II) Unloading vbe
[    95.246] (EE) Screen(s) found, but none have a usable configuration.
[    95.246] (EE)
Fatal server error:
[    95.246] (EE) no screens found(EE)
[    95.246] (EE)
Please consult the The X.Org Foundation support
   at http://wiki.x.org
 for help.
[    95.247] (EE) Please also check the log file at "/var/lib/gdm3/.local/share/xorg/Xorg.0.log" for additional information.
[    95.247] (EE)
[    95.255] (EE) Server terminated with error (1). Closing log file.

#20 05-12-2016 21:37:19

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

une idée installer jessie minimal puis le noyau des backports
upgrader en stretch
démarrer avec le noyau de jessie (je suppose qu il est encore en 4.7  )
cela fait un peu de boulot mais tu verra au démarrage la difference entre 3.16 , 4.7 et 4.8 au niveau des erreurs
note : a moins que quelqu'un t explique comment rétrograder le noyau proprement sur ta stretch

#21 05-12-2016 21:37:47

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Car le log me dit qu'il ne trouve pas de configuration utilisable mais on fait comment pour configurer Xorg avec une car Intel ?

[    95.243] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    95.243] (EE) open /dev/dri/card0: No such file or directory

[    95.244] (EE) open /dev/fb0: Permission denied

[    95.244] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    95.244] (EE) Screen 0 deleted because of no matching config section.

[    95.246] (EE) VESA(0): Cannot read int vect

[    95.246] (EE) Screen(s) found, but none have a usable configuration.
[    95.246] (EE)
Fatal server error:
[    95.246] (EE) no screens found(EE)

Dernière modification par Anonyme-9 (05-12-2016 21:38:12)

#22 05-12-2016 21:40:22

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

tu peut utiliser cette commande et poster le retour


journalctl -r -p err
 



a mon avis c est le noyau , pas le serveur X qui détecte mal ta carte

ps: la prise en compte du materiel ce fait en 2 étape , au démarrage puis le driver du serveur X

Dernière modification par anonyme (05-12-2016 21:42:12)

#23 05-12-2016 21:50:57

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Ça me dérange pas de le réinstaller, mais c'est un pc livré avec ubuntu 14, c'est blizzard que j'ai autant de problème avec debian, j'avais installer le noyau 4.2.2ubuntu sur jessie car justement c'était celui de ubuntu 14 et que j'avais pas de problème avec hmm .Je vois ça et je tiens au courant, mais j'ai jamais trop compris comment passer d'une stable vers une testing, j'ai toujours réinstallé complètement (je vois bien qu'il faut changer les dépôts et faire un dist-upgrade mais c'est tous ?).

#24 05-12-2016 22:03:10

Anonyme-9
Invité

Re : Problème démarrage DebStretch sur N3050

Résultat de journalctl -r -p err (en recovery et nomodeset)

-- Logs begin at Mon 2016-12-05 21:59:11 CET, end at Mon 2016-12-05 22:01:29 CET. --
déc. 05 21:59:20 theo-inspiron-15-3552-1 root[418]: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
déc. 05 21:59:19 theo-inspiron-15-3552-1 kernel: usb 1-2.3: unexpected tiny rx frame
déc. 05 21:59:19 theo-inspiron-15-3552-1 kernel: dm9601 1-2.3:1.0 enx00e04c534458: kevent 4 may have been dropped
déc. 05 21:59:19 theo-inspiron-15-3552-1 kernel: dm9601 1-2.3:1.0 enx00e04c534458: kevent 4 may have been dropped
déc. 05 21:59:19 theo-inspiron-15-3552-1 kernel: dm9601 1-2.3:1.0 enx00e04c534458: kevent 4 may have been dropped
déc. 05 21:59:19 theo-inspiron-15-3552-1 kernel: dm9601 1-2.3:1.0 enx00e04c534458: kevent 4 may have been dropped
déc. 05 21:59:19 theo-inspiron-15-3552-1 kernel: dm9601 1-2.3:1.0 enx00e04c534458: kevent 4 may have been dropped
déc. 05 21:59:19 theo-inspiron-15-3552-1 root[408]: /etc/dhcp/dhclient-enter-hooks.d/avahi-autoipd returned non-zero exit status 1
déc. 05 21:59:19 theo-inspiron-15-3552-1 systemd[395]: rescue.service: Failed at step EXEC spawning /bin/plymouth: No such file or directory
déc. 05 21:59:15 theo-inspiron-15-3552-1 kernel: Bluetooth: Loading patch file failed
déc. 05 21:59:15 theo-inspiron-15-3552-1 kernel: usb 1-2.1: firmware: failed to load ar3k/AthrBT_0x31010000.dfu (-2)

#25 05-12-2016 22:23:33

anonyme
Invité

Re : Problème démarrage DebStretch sur N3050

coupure adsl désolé

tu utilise une testing , et il semble que le noyau 4.8 pose probleme a beaucoup de monde
a titre expérimental je suis aller chercher le noyau de jessie avec les backports et ça a fonctionné (sous stretch ) , pour avoir le 4.7

pour dist upgrade vers stretch
mettre a jour le cache apt


apt-get update
 


mettre a jours les outils


apt-get upgrade
 


faire le dist-upgrade


apt-get dist-upgrade
 



au reboot tu sélectionne le noyau 4.7 de jessie et voir si le meme probleme (tu aura tous les paquets du serveur X en version stretch )

Dernière modification par anonyme (05-12-2016 22:36:45)

Pied de page des forums