logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 21-11-2016 10:49:31

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

[Résolu]Pb Installation de stretch alpha 8

Ce matin j'ai essayé d'installer une nouvelle fois stretch, avec un cd net install alpha 8,
La procédure se déroule normalement sans difficulté, mais au reboot j'obtiens toujours

....nouveau 000:01:00.0 firmware :failed to load nvidia /gm2_non ctx.bin (-2) et
....nouveau 000:01:00.0 : gr ctor failed -2


Donc, rien n'a changé, ni ne c'est amélioré avec la nouvelle mouture, au contraire l'alpha 8 m'amène sur un écran qui s'affiche en clignotant et je ne peux rien faire.
Pourquoi y a t-il eu régression par rapport à Stretch alpha4 qui fonctionnait si bien du premier coup, sans aucun problème et que j j'ai perdu à cause de ma mauvaise idée d'essayer l'alpha 7

Je suis en dual boot Jessie et Stretch sans rien d'autre, ou plutôt  tentative de réinstallation de Stretch sur mon deuxième disque, pour ne pas compromettre le bon fonctionnement de Jessie.

Depuis Jessie pourrais je faire quelque chose pour remédier au problème ?
Guppy

Dernière modification par Guppy88 (17-12-2016 12:58:38)

Hors ligne

#2 21-11-2016 11:24:51

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

Bonjour Guppy88  wink

non pas de régression c'est un souci de Gnome , fait la meme installation avec un bureau mate je pense que ça va bien se passer.
comme tu dois ne pas avoir la main pour passer en console pure , tu peut aussi redémarrer en mode rescue ton mdp root et lancer l installation du driver pour ta GTX980 et reboot

une commande du genre devrai suffire :


apt-get install xserver-xorg-video-nvidia nvidia-driver nvidia-driver-bin
 



j'ai donné sur le forum ce souci avec gnome (et pas avec mate ) par contre c'est vrai que bizzare , le probleme se situe avec gdm3 surement au début du chargement du serveur X
si tu veut tester mate prend plutot lightdm , mais je pense que pour toi le plus simple c est le mode rescue

une autre methode , installation minimale de stretch puis lancer  wink


apt-get install xserver-xorg-video-nvidia nvidia-driver nvidia-driver-bin gnome gdm3
 



et reboot smile

ps: pour le message de ma GTX970 ou 980 j'ai le meme que toi et ça clignote  ( a partir de jessie minimal => stretch minimal => bureau )
avec jessie tu aura le meme souci si tu veus démarrer stretch avec nouveau + gnome + gdm3 et ta carte GTX980

Dernière modification par anonyme (21-11-2016 11:36:39)

#3 21-11-2016 11:34:13

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

Bon, j'ai pas attendu ta réponse, j'ai refait une installation minimum, sans aucun environnement, cela prend juste prends juste 5min et au reboot cela m'ouvre directement une console.

Maintenant je crois savoir comment comment faire pour installer le bon driver nvidia, mais comment le télécharger depuis une console ?
Merci
J'ai vraiment pas attendu ta réponse, je viens de voir que tu l'as complétée avec l' information qui me manquait. Je teste ça tout de suite.
Re-merci pour ta sollicitude.

Dernière modification par Guppy88 (21-11-2016 11:38:46)

Hors ligne

#4 21-11-2016 11:38:11

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

pense a modifier ton souces.list avec une installation neuve wink  => main contrib non-free

#5 21-11-2016 16:36:08

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

Bon ça ne fonctionne pas, j'ai modifié mon sources.list en ajoutant contrib et non-free.

La commande


apt-get install xserver-xorg-video-nvidia nvidia-driver nvidia-driver-bin gnome gdm3


répond bien et tente d’installer le driver mais il me répond à la fin qu'il ne trouve pas les fichiers.
Voilà mon sources.list

deb http://ftp.fr.debian.org/debian/ stretch main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ stretch main contrib non-free

deb http://security.debian.org/debian-security stretch/updates main contrib non-free
deb-src http://security.debian.org/debian-security stretch/updates main contrib non-free



Il faut peut être ajouter une ligne de plus pour lui dire où se trouvent ce driver ?
Guppy

Hors ligne

#6 21-11-2016 17:06:36

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

tu a fait un apt-get update et pas d'erreur ?

il en trouve aucun ?

tu peut simuler par exemple


apt-get -s install xserver-xorg-video-nvidia
 



a moins d une faute sur le nom de ma part non , nvidia-driver ce trouve sur les dépots debian

il te manque la ligne "stretch-updates" dans ton souces.list mais je pense pas que ça bloque l installation


deb http://security.debian.org/ stretch/updates main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free



fait un apt-get update et upgrade voir si tu a le réseau et si tu met bien a jour ton cache (sans erreurs )

Dernière modification par anonyme (22-11-2016 09:24:49)

#7 21-11-2016 22:37:36

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

J'ai forcé l'installationt qui ne voulait pas se faire à cause d'une clé publique invalide,  réponse ce n'est pas sûr voulez vous continuer ?
j'ai répondu oui et j'ai obtenu énormément de téléchargement de fichier, et plusieurs pages de fichiers téléchargés et installés,
J'ai fait la même chose avec les deux autres commandes, mais au reboot  après une série impressionnante de ok dont le dernier est
started network manager script dispatcher service
j'obtiens le message suivant
sd 7:0:0:0:0 [sdd] asking for cache data failed
sd 7:0:0:0:0 [sdd Assuming drive cahe: write trough qui clignote puis fini par s'arrêter de clignoter

Et il me reste un tiret clignotant, qui ne donne accès à rien.
Je suis sorti de là avec un CTRL ALT SUP.

Hors ligne

#8 22-11-2016 08:47:55

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

Bonjour
je comprend pas ce que tu a fait.
il faut que tu soit plus précis

1) installation minimale (stretch ou jessie ?) décocher tout sauf les outils (derniere ligne )
3) fin de l installation mettre a jour le sources.list
2) si jessie minimale un update , ugrade et dist-upgrade (tu te retrouve avec une stretch minimale )
3) si stretch  minimale rien a faire
4) installer le bureau et le driver non free (pour éviter le bug de nouveau avec gtx980 et gdm3 + gnome )

pour les commandes il y en a qu une : (installation du driver non-free ) le reste est standart (installation de stretch )
mettre a jour le cache d apt


apt-get update
 


mettre a jour la stretch minimale


apt-get upgrade
 


installer lanceur + le bureau +  driver nonfree de stretch


apt-get install  gdm3 gnome  xserver-xorg-video-nvidia nvidia-driver nvidia-driver-bin
 


et un reboot
a aucun moment tu ne doit avoir d'erreur

ps: tu peut prendre la commande du wiki nvidia pour le driver
https://debian-facile.org/doc:materiel: … ia:accueil

ce qui donne
installer le bureau


apt-get install gdm3 gnome
 


installer le driver


apt-get install nvidia-kernel-dkms nvidia-settings nvidia-driver linux-headers-$(uname -r)
 


redémarrer


reboot
 



si tu a une erreur pas la peine de continuer , nous dire quel erreur tu rencontre

nota: avant de lancer l installation du bureau et du driver peut etre vérifier ta stretch minimale
un uname -a  (en plus de l update et upgrade ) te donnera la version du noyau


uname -a
 


retour


Linux nom-machine 4.8.0-1-amd64 #1 SMP Debian 4.8.5-1 (2016-10-28) x86_64 GNU/Linux
 



ps: on évite d installer un driver sans bureau par exemple , ta remarque a propos "des commandes" m 'inquiette , c est un lanceur + un bureau + driver nonfree

pour l acces au dépot debian idem il ne doit pas y avoir d'erreur ( update ou upgrade ou dist-upgrade et la récupération des paquets pour l ' installation )

ton sources.list pour stretch


deb http://security.debian.org/ stretch/updates main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
 



je vois pas trop ce que je peut te dire de plus
a toi d etre plus precis dans ta démarche , avec quelle debian tu commence l installation etc ...........

Dernière modification par anonyme (22-11-2016 09:20:59)

#9 22-11-2016 11:28:51

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

J'ai fait exactement ce que tu as décrit, installation minimale de stretch alpha 8, minimale c'est à dire sans environnement de bureau, sans gnome.
Pour ça pas de problème,  il y a seulement 551 fichiers à télécharger, la barre se déroule à toute vitesse, il faut environ 5 minutes et au reboot j'obtiens un grub bleu qui lance une stretch fonctionnelle en console (ou...  Jessie pour pouvoir te répondre)

Ensuite j'ai tapé "su" "mon mdp "  pour devenir root et ajouté contrib et non-free au bout des lignes existantes de mon sources.list (sans celle relative stretch updates) j'avais fais cela avant que tu ne me l'indiques.


Ensuite tes commandes, update,  upgrade pas d'erreur, les commandes font bien quelque chose, dont téléchargement de fichiers mais 0 installés pour l'un et 1 installé et  pour l'autre.
mais comme il me manquait la ligne

deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free

(Je ne sais pas quel code tu choisis pour afficher en couleur.)
Et c'est peut être de là que vient l'absence de résultat positif.

Ensuite l le lancement de l'install, comme tu las indiqué.
installer lanceur + le bureau +  driver nonfree de stretch,
mais pas dans l'ordre que tu as donné dans ce dernier message,  j'ai utilisé l'ordre indiqué dans ton précédent message et donc commencé par xserver....nvidia-driver puis nvidia-server-bin
et gnome gdm3 en dernier
Et il n'y a pas d'erreur au sens qu'il y aurait des erreurs de commande, seulement un problème de clé publique qu'il ne trouve pas et demande si l'on peut continuer malgré tout.
J'ai répondu oui.

Je viens de réessayer de lancer stretch, à partir du grub qui a été construit ; il est devenu vert  au lieu de bleu en stretch minimale preuve qu'il a construit un nouveau grub, lequel me permet toujours de lancer Jessie, sans cela pas de réponse possible.
Je n'ai aucun Windows nulle part sur cette machine.

Au lancement de stretch avec ce grub toute une série d'actions s'affiche, avec des ok en vert partout , mais je n'ai pas le temps de tout voir ça va trop vite, j'ai pu voir des trucs relatif à l'affichage à network à gnome et cela s'arrête en clignotant sur le  dernier message
sd 7:0:0:0:0 [sdd] asking for cache data failed
sd 7:0:0:0:0 [sdd Assuming drive cahe: write trough

Guppy

J'oubliais, à un moment de la procédure d'installation il m'a affiché un message  indqiuant qu'il y avait conflit entre le driver nvidia et nouveau, mais qu'il suffisait de relancer la machine pour le résoudre,  j'ai pensé que tes commandes avaient fonctionné.

Dernière modification par Guppy88 (22-11-2016 11:37:41)

Hors ligne

#10 22-11-2016 12:00:51

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

je n utilise plus l'installateur stretch depuis pas mal de temps (donc je peut pas juger si bon ou mauvais )
j'utilise l installateur net-install ou le dvd1 de jessie ou je suis sur de pas avoir de surprise smile
pour la mise a niveau vers stretch c'est tres rapide avec un reboot pour le noyau ( comme tu dit pas beaucoup de paquet a mettre a niveau )
quand ma stretch minimale est a jour je fais l installation du bureau

pas de probleme de clé publique avec cette méthode

pour mon installation de gnome (je n'ai qu une machine , le reste est en mate ) , comme je suis fainéant , suite au bug avec le clignotement j'ai fait un reboot puis dans grub autres options et le mode depannage quand il me propose de rentrer le mdp root ,je m execute et j installe le driver un reboot et je suis sous mon bureau gnome (une autre méthode pour ce tirer d'affaire )

normalement il y a aucun probleme , je comprend pas ce qu il se passe et je met en doute l installateur stretch roll

une troisieme solution c est de choisir stretch + mate + lightdm , le bureau fonctionne avec nouveau et d installer tranquillement ton driver quand tout est correct tu installe gnome + gdm3 a partir de mate et tu précise que tu veut utiliser gdm3 ensuite tu peut enlever mate et son lanceur lightdm.

je ne rencontre pas tout ces soucis et la seule difference j utilise une clé usb avec l image dvd1 de jessie (meme pas le net-install ) qui commence a etre ancienne mais pas important puisque je dist-upgrade en stretch

serieux a part le bug connu gdm3 + nouveau avec ta carte , tout doit se faire sans probleme

commande


journalctl -r -p err
 


retour


-- Logs begin at Tue 2016-11-22 10:53:02 CET, end at Tue 2016-11-22 12:04:11 CET. --
nov. 22 10:53:41 debian11 pulseaudio[1292]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
nov. 22 10:53:41 debian11 pulseaudio[1471]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out
nov. 22 10:53:07 debian11 gnome-session-binary[1157]: Unrecoverable failure in required component org.gnome.Shell.desktop
nov. 22 10:53:03 debian11 minissdpd[483]: setsockopt(udp, IP_ADD_MEMBERSHIP)(0.0.0.0): No such device
 


j ai fait un ghost de mon dd systeme ce matin sur un ssd , les erreurs depuis le démarrage , pour un gnome testing je trouve plutot bien tongue
pour mon pc de tous les jours je commence a apprécier gnome , j'ai la notification des mises a jours , steam fonctionne parfaitement et pour mon cadeau de noel j'ai une GTX1070 tongue installé cool
bon un peu en avance tongue
je suis en mode "gnome" pas "gnome classic"

nota: j'ai fait l installation avec la GTX980 , la GTX1070 est arrivé apres , que tu pense pas que ce soit un probleme de model de carte

ps: pour l installateur debian je pense qu il est capable de savoir dans quel ordre installer les paquets mais soyons rigoureux d'ou la modification de mon post.
d'ailleurs l installation en 2 temps possible aussi
1) gdm3 + le bureau
pas de reboot
2) l installation du drivers nvidia nonfree
un reboot
plutot que de tout lancer sur une seule ligne ( ça fonctionne dans les 2 cas )

Dernière modification par anonyme (22-11-2016 12:29:22)

#11 07-12-2016 13:47:33

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

Bon après une attente de 15 jours, j'ai retenté une install de Stretch, à partir du cd net install alpha 8.
J'ai d'abord fait une installation minimum, sans gnome, sans environnement de bureau.
Cette première partie se déroule toute seule et au reboot j'obtiens une stretc/sid fonctionnelle en console.
Je modifie mon sources.list.
Je fais un update un upgrade, puis je fais apt -get install gdm3 et gnome, jusque là pas de problème. Une quantité de paquets se téléchargent et s'installent.

Ensuite je lance la commande


apt-get install nvidia-kernel-dkms nvidia-settings nvidia-driver linux-headers-$(uname -r)

et là ça se termine mal

..impossible de trouver le paquet headers 4.7.0-1 amd64...



Si je comprends bien il se passe la même chose que lors de ma toute première tentative de passage à Debian avec Wheezy, il me manquait les headers correspondant à mon noyau.
La commande

uname -a

  me réponds

Linux nom-machine 4.7.0-1-amd64 #1 SMP Debian 4.7.8-1 (2016-10-19) x86_64 GNU/Linux


alors que tu m'écris qu'elle devrait être


Linux nom-machine 4.8.0-1-amd64 #1 SMP Debian 4.8.5-1 (2016-10-28) x86_64 GNU/Linux

pourquoi cette différence ? d'où peut elle venir ?

Au reboot, je tombe sur un écran clignotant, qui fini par se fixer.

J'ai découvert que si je ne peux toujours plus rien faire avec cette page,  je peux ouvrir une console en tty2 et que cette console est opérationnelle, les commandes répondent et disent que je suis en 4.7.0-1 amd64 par exemple. Je peux même retourner en tty1 mais rien écrire dessus.
Donc je reviens en tty2 et je fais reboot en su pour revenir sur jessie.

Tu précises à un moment que tu ne te sers plus de l'installateur stretch, quelle est la différence entre cet installateur et celui qui est lancé par le cd net install ?
Guppy

Hors ligne

#12 07-12-2016 13:59:41

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

Bonjour
il te suffit de mettre a jour ta stretch

tu utilise le réseau et normalement (net-install ) il te demande si tu veut choisir un dépot pour les mises a jour , si tu répond oui tu aura le noyau 4.8 installé
le noyau 4.7 n existe plus dans les dépots stretch

moi j utilise le DVD1 de stretch quand il veut bien fonctionner hmm
sinon jessie minimale et dist-upgrade vers stretch ensuite

quand tu a modifié ton souces.list tu a fait un :


apt-get update
 


si tu est en 4.7 , il doit te proposer le 4.8 en mise a jour

ps: a l instalation de gnome + gdm3 idem pourquoi tu n a pas le noyau 4.8 en mise a jour

et de toute maniere quand tu a finit l installation minimale tu aurai du etre en 4.8  (le 4.7 doit faire partie du net-install je suppose )

tu peut installer manuellement le 4.8 en console puis mettre a jour le drivers.


apt-get install linux-image-amd64 linux-image-4.8.0-1-amd64 linux-headers-4.8.0-1-amd64
 



ps: sur une installation stretch dvd1 (sur clé usb ) en i386 il a planté a 95% (l installation des paquets a rencontré un probleme roll ) , j ai basculé sur installation de grub et ça a fonctionné tongue
3500 paquets l installation en full gnome pas envie de tout recommencer hmm

nota : l installateur de stretch est en béta , celui de jessie est stable (et sans bug wink ) , aprés net-install et dvd1 meme chose a part que le dvd1 tu peut te passer d internet .

Dernière modification par anonyme (07-12-2016 14:23:33)

#13 07-12-2016 18:17:28

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

bon, je n'ai toujours pas réussi, avec gnome ou seulement l'installation minimale je n'arrive pas à passer en 4.8.0-1-amd64 , mais en choisissant de refaire une nouvelle fois l'installation, j'ai pris l'option mate que tu as proposé.
Avec lui pas de problème, au reboot je tombe sur la page d'accueil, je passe en console, je suis en 4.7.0-1 mais après un update je suis passé en 4.8.0-1 et j'ai pu installer le driver nvidia.
Sauf que si j'ai bien un affichage , il est énorme.
L'outil de configuration de l'affichage de mate me dit que l'écran est un  samsung en 1920 x 1080. Mais aucune des résolutions possible ne change rien.
Guppy

Hors ligne

#14 07-12-2016 19:59:18

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

Bonsoir
pour mate c est normal , en mode vesa par exemple il va fonctionner (pas gnome + gdm3 )

maintenant il faut savoir pourquoi le driver fonctionne mal.
il faut un reboot aprés le passage en noyau 4.8 , puis un reboot a l installation du driver nvidia
tu arrive a faire quelque chose en mode graphique ou en console pure ?

ps: en tout cas j ai jamais vu autant de galere sur une installation hmm

je pense a quelque chose pour installer le noyau 4.8 tu a utilisé la ligne que je t ai indiqué au dessus ?
qu il manque pas quelque chose pour la compilation du driver ,

une ligne a tester avec le -s (pour simulation) je suis sur que c est déja installé mais pour vérifier


apt-get -s --reinstall install linux-image-amd64 linux-image-4.8.0-1-amd64 linux-headers-4.8.0-1-amd64 linux-headers-4.8.0-1-common linux-kbuild-4.8 linux-compiler-gcc-5-x86 kmod linux-base
 


tu peut enlever le "-s" mais pas le "--reinstall" qui t évitera de passer les paquet en "installé manuellement"
si le noyau est modifié il faut redémarrer la machine .

ensuite la meme chose avec :


apt-get -s --reinstall install nvidia-kernel-dkms xserver-xorg-video-nvidia nvidia-driver nvidia-driver-bin nvidia-settings nvidia-support nvidia-alternative pkg-config
 


idem tu peut enlever le "-s"  pour installer , mais pas le "--reinstall" pour la meme raison.

en console le "building du noyau" doit etre dans la console et ça dure au moins 5 minutes , quand l installation est terminé  il faut redémarrer la machine .

normalement tous ces paquets devraient etre déja installé  roll

nota: si tout ça ne fonctionne pas , on regardera le log du serveur X  roll

Dernière modification par anonyme (07-12-2016 20:54:14)

#15 07-12-2016 23:45:17

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

J'ai tapé tes commandes,  en mode console, la réponse à la première est

0 mis à jour,0 nouvellement installés, 8 réinstallés, 0 à enlever et 0 mis à jour.

La réponse à la deuxième m'a d'abord répondu par une erreur, mais j'avais oublié un t à nvidia-settings,
après correction, tout était indiqué en conf.
Le tout en quelques secondes seulement.
J'ai tapé CTRL Alt F7 pour revenir en mode grahique et répondre ici. 
Donc je crois qu'il n'y a pas d'erreur, ce doit être juste une configuration à entrer quelque part.
Guppy

voilà une copie d'écran
captur10.png
en tout cas c'est facile à lire même de loin  lol

Dernière modification par Guppy88 (08-12-2016 00:02:13)

Hors ligne

#16 08-12-2016 09:15:28

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

Bonjour

le contenu du log /var/log/Xorg.0.log


nano /var/log/Xorg.0.log
 



dans le menu "systeme => administration => parametre du serveur X  (nvidia-settings)  fonctionne ?

dans le menu "systeme" => préférences => materiel => affichage =>  tu peut régler la définition de l écran ?

Dernière modification par anonyme (08-12-2016 09:16:24)

#17 08-12-2016 13:05:38

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

dans le menu "systeme => administration => parametre du serveur X  (nvidia-settings)  fonctionne ?

Non, je n'ai accès qu' à Synaptic dans cette partie

dans le menu "systeme" => préférences => materiel => affichage =>  tu peux régler la définition de l écran ?

oui et non
Oui, parceque je peux diminuer la résolution et il la prends bien en compte. Mais non, pour le résultat parce que si  je descends en dessous de 1920X1080 cela devient de plus en plus gros au point qu'un mot ne tient même plus dans l'écran.

Comme synaptic est disponible et que Blender 2.78a fait partie des paquets je l'ai installé.
Il s'affiche bien et en taille normale pour ce qui est des fenêtres et de la police utilsée, mais si je vais dans user préférences->system, la fonction GPU n'est pas disponible, je n'ai accès qu'à CPu. Cela prouve que NVIDIA n'est pas bien installé ou CUDA ?

Enfin je ne sais pas pas comment afficher ici le contenu de nano, je peux t'en copier un bout à partir de la visualisation du contenu par l'intermédiaire du gestionnaire de fichier.
Le contenu de Xorg.0.log est très long.
Je sais qu'il existe un moyen de l'afficher dans une petite fenêtre pour lire le contenu en le faisant défiler, sans occuper des pages dans le forum mais je ne sais pas comment on fait.

J'ai été formateur en contrôle budgétaire et je sais comme c'est difficle de se confronter à des personnes qui ne comprennent pas des choses qui paraissent simples et évidentes (quand on les maitrise). J'ai bien 'impression que c'est ce que je te fais ressentir avec mes maladresses et ratés, aussi je tiens à te remercier, pour le temps que tu m'accordes, ton suivi et ta patience.

Guppy

Dernière modification par Guppy88 (08-12-2016 13:06:56)

Hors ligne

#18 08-12-2016 13:23:19

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

cuda n'est pas installé , du moins je ne l ai pas mit dans mes commandes . (ça ne sert a rien tant que le drivers nvidia ne fonctionne pas )

avec "caja" tu peut copier le fichier dans Documents et ensuite l ouvrir avec "pluma" tout sélectionner et copier / coller sur le forum
ps:je l ai renommé "Xorg.0.log.txt en option  wink

je te cite : " Le tout en quelques secondes seulement."  le driver n 'est peut etre toujours pas bien compilé dans le noyau .
vérifier ta version du noyau


uname -a
 


le retour doit donner


Linux debian12 4.8.0-1-amd64 #1 SMP Debian 4.8.7-1 (2016-11-13) x86_64 GNU/Linux
 



en fonction du résultat du log du serveur X , peut etre il faudra réinstaller proprement le driver (ne cherche pas a installer cuda , et si tu la déja fait me le dire il faudra le purger )

nota: j attend les retours avant de te donner la purge du driver nvidia (j espere que avec nouveau et ta GTX980 on aura la main et pas un plantage de debian  )

Dernière modification par anonyme (08-12-2016 13:56:05)

#19 08-12-2016 15:55:06

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

j'ai bien  le bon noyau, dans la bonne version.

uname -a


Linux nom-pc 4.8.0-1-amd64 #1 SMP Debian 4.8.7-1 (2016-11-13) x86_64 GNU/Linux
 


J'ai mis CUDA, il faudra me donner la commande pour le purger.

Voilà ce que tu souhaites  avec Caja (bon c'est comme ça que je pensais faire)

X.Org X Server 1.18.4
Release Date: 2016-07-19
[     3.457] X Protocol Version 11, Revision 0
[     3.457] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     3.457] Current Operating System: Linux Guppy-PC 4.8.0-1-amd64 #1 SMP Debian 4.8.7-1 (2016-11-13) x86_64
[     3.457] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=e60dda8f-6a07-4ee2-ab10-d9861d6379ad ro quiet
[     3.457] Build Date: 06 September 2016  01:32:44PM
[     3.457] xorg-server 2:1.18.4-2 ([url]https://www.debian.org/support[/url])
[     3.457] Current version of pixman: 0.34.0
[     3.457]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[     3.457] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.457] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec  8 11:17:14 2016
[     3.462] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.463] (==) No Layout section.  Using the first Screen section.
[     3.463] (==) No screen section available. Using defaults.
[     3.463] (**) |-->Screen "Default Screen Section" (0)
[     3.463] (**) |   |-->Monitor "<default monitor>"
[     3.464] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[     3.464] (==) Automatically adding devices
[     3.464] (==) Automatically enabling devices
[     3.464] (==) Automatically adding GPU devices
[     3.464] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.466]     Entry deleted from font path.
[     3.469] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[     3.469] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.469] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.470] (II) Loader magic: 0x559179885dc0
[     3.470] (II) Module ABI versions:
[     3.470]     X.Org ANSI C Emulation: 0.4
[     3.470]     X.Org Video Driver: 20.0
[     3.470]     X.Org XInput driver : 22.1
[     3.470]     X.Org Server Extension : 9.0
[     3.471] (++) using VT number 7

[     3.471] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.471] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.473] (--) PCI:*(0:1:0:0) 10de:13c0:1043:8518 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     3.473] (II) LoadModule: "glx"
[     3.474] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[     3.527] (II) Module glx: vendor="NVIDIA Corporation"
[     3.527]     compiled for 4.0.2, module version = 1.0.0
[     3.527]     Module class: X.Org Server Extension
[     3.528] (II) NVIDIA GLX Module  367.57  Mon Oct  3 20:28:17 PDT 2016
[     3.529] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[     3.529]     loading driver: nvidia
[     3.529] (==) Matched nvidia as autoconfigured driver 0
[     3.529] (==) Matched nouveau as autoconfigured driver 1
[     3.529] (==) Matched nv as autoconfigured driver 2
[     3.529] (==) Matched nouveau as autoconfigured driver 3
[     3.529] (==) Matched nv as autoconfigured driver 4
[     3.529] (==) Matched modesetting as autoconfigured driver 5
[     3.529] (==) Matched fbdev as autoconfigured driver 6
[     3.529] (==) Matched vesa as autoconfigured driver 7
[     3.529] (==) Assigned the driver to the xf86ConfigLayout
[     3.529] (II) LoadModule: "nvidia"
[     3.530] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     3.538] (II) Module nvidia: vendor="NVIDIA Corporation"
[     3.538]     compiled for 4.0.2, module version = 1.0.0
[     3.538]     Module class: X.Org Video Driver
[     3.539] (II) LoadModule: "nouveau"
[     3.539] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     3.541] (II) Module nouveau: vendor="X.Org Foundation"
[     3.541]     compiled for 1.18.4, module version = 1.0.13
[     3.541]     Module class: X.Org Video Driver
[     3.541]     ABI class: X.Org Video Driver, version 20.0
[     3.541] (II) LoadModule: "nv"
[     3.541] (WW) Warning, couldn't open module nv
[     3.541] (II) UnloadModule: "nv"
[     3.541] (II) Unloading nv
[     3.541] (EE) Failed to load module "nv" (module does not exist, 0)
[     3.541] (II) LoadModule: "modesetting"
[     3.542] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.542] (II) Module modesetting: vendor="X.Org Foundation"
[     3.542]     compiled for 1.18.4, module version = 1.18.4
[     3.542]     Module class: X.Org Video Driver
[     3.542]     ABI class: X.Org Video Driver, version 20.0
[     3.542] (II) LoadModule: "fbdev"
[     3.542] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.543] (II) Module fbdev: vendor="X.Org Foundation"
[     3.543]     compiled for 1.18.0, module version = 0.4.4
[     3.543]     Module class: X.Org Video Driver
[     3.543]     ABI class: X.Org Video Driver, version 20.0
[     3.543] (II) LoadModule: "vesa"
[     3.543] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.544] (II) Module vesa: vendor="X.Org Foundation"
[     3.544]     compiled for 1.18.0, module version = 2.3.4
[     3.544]     Module class: X.Org Video Driver
[     3.544]     ABI class: X.Org Video Driver, version 20.0
[     3.544] (II) NVIDIA dlloader X Driver  367.57  Mon Oct  3 20:03:48 PDT 2016
[     3.544] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     3.545] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400
[     3.545] (II) NOUVEAU driver for NVIDIA chipset families :
[     3.545]     RIVA TNT        (NV04)
[     3.545]     RIVA TNT2       (NV05)
[     3.545]     GeForce 256     (NV10)
[     3.545]     GeForce 2       (NV11, NV15)
[     3.545]     GeForce 4MX     (NV17, NV18)
[     3.545]     GeForce 3       (NV20)
[     3.545]     GeForce 4Ti     (NV25, NV28)
[     3.545]     GeForce FX      (NV3x)
[     3.545]     GeForce 6       (NV4x)
[     3.545]     GeForce 7       (G7x)
[     3.545]     GeForce 8       (G8x)
[     3.545]     GeForce GTX 200 (NVA0)
[     3.545]     GeForce GTX 400 (NVC0)
[     3.545] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.545] (II) FBDEV: driver for framebuffer: fbdev
[     3.545] (II) VESA: driver for VESA chipsets: vesa
[     3.553] (II) Loading sub module "fb"
[     3.553] (II) LoadModule: "fb"
[     3.553] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.554] (II) Module fb: vendor="X.Org Foundation"
[     3.554]     compiled for 1.18.4, module version = 1.0.0
[     3.554]     ABI class: X.Org ANSI C Emulation, version 0.4
[     3.554] (II) Loading sub module "wfb"
[     3.554] (II) LoadModule: "wfb"
[     3.554] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     3.556] (II) Module wfb: vendor="X.Org Foundation"
[     3.556]     compiled for 1.18.4, module version = 1.0.0
[     3.556]     ABI class: X.Org ANSI C Emulation, version 0.4
[     3.556] (II) Loading sub module "ramdac"
[     3.556] (II) LoadModule: "ramdac"
[     3.556] (II) Module "ramdac" already built-in
[     3.559] (WW) Falling back to old probe method for modesetting
[     3.559] (WW) Falling back to old probe method for fbdev
[     3.559] (II) Loading sub module "fbdevhw"
[     3.559] (II) LoadModule: "fbdevhw"
[     3.559] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.559] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.559]     compiled for 1.18.4, module version = 0.0.2
[     3.559]     ABI class: X.Org Video Driver, version 20.0
[     3.559] (EE) open /dev/fb0: No such file or directory
[     3.559] (WW) Falling back to old probe method for vesa
[     3.559] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[     3.559] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     3.559] (==) NVIDIA(0): RGB weight 888
[     3.559] (==) NVIDIA(0): Default visual is TrueColor
[     3.559] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.561] (**) NVIDIA(0): Enabling 2D acceleration
[     4.281] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     4.281] (--) NVIDIA(0):     CRT-0
[     4.281] (--) NVIDIA(0):     DFP-0
[     4.281] (--) NVIDIA(0):     DFP-1
[     4.281] (--) NVIDIA(0):     DFP-2
[     4.281] (--) NVIDIA(0):     DFP-3
[     4.281] (--) NVIDIA(0):     DFP-4
[     4.281] (--) NVIDIA(0):     DFP-5
[     4.281] (--) NVIDIA(0):     DFP-6
[     4.281] (--) NVIDIA(0):     DFP-7 (boot)
[     4.284] (--) NVIDIA(0): CRT-0: disconnected
[     4.284] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[     4.284] (--) NVIDIA(0):
[     4.286] (--) NVIDIA(0): DFP-0: disconnected
[     4.286] (--) NVIDIA(0): DFP-0: Internal TMDS
[     4.286] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[     4.286] (--) NVIDIA(0):
[     4.286] (--) NVIDIA(0): DFP-1: disconnected
[     4.286] (--) NVIDIA(0): DFP-1: Internal TMDS
[     4.286] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[     4.286] (--) NVIDIA(0):
[     4.286] (--) NVIDIA(0): DFP-2: disconnected
[     4.286] (--) NVIDIA(0): DFP-2: Internal DisplayPort
[     4.286] (--) NVIDIA(0): DFP-2: 960.0 MHz maximum pixel clock
[     4.286] (--) NVIDIA(0):
[     4.286] (--) NVIDIA(0): DFP-3: disconnected
[     4.286] (--) NVIDIA(0): DFP-3: Internal TMDS
[     4.286] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock
[     4.286] (--) NVIDIA(0):
[     4.286] (--) NVIDIA(0): DFP-4: disconnected
[     4.286] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[     4.286] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[     4.286] (--) NVIDIA(0):
[     4.287] (--) NVIDIA(0): DFP-5: disconnected
[     4.287] (--) NVIDIA(0): DFP-5: Internal TMDS
[     4.287] (--) NVIDIA(0): DFP-5: 330.0 MHz maximum pixel clock
[     4.287] (--) NVIDIA(0):
[     4.287] (--) NVIDIA(0): DFP-6: disconnected
[     4.287] (--) NVIDIA(0): DFP-6: Internal DisplayPort
[     4.287] (--) NVIDIA(0): DFP-6: 960.0 MHz maximum pixel clock
[     4.287] (--) NVIDIA(0):
[     4.350] (--) NVIDIA(0): Samsung SyncMaster (DFP-7): connected
[     4.350] (--) NVIDIA(0): Samsung SyncMaster (DFP-7): Internal TMDS
[     4.350] (--) NVIDIA(0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[     4.350] (--) NVIDIA(0):
[     4.355] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 980 (GM204-A) at PCI:1:0:0 (GPU-0)
[     4.355] (--) NVIDIA(0): Memory: 4194304 kBytes
[     4.355] (--) NVIDIA(0): VideoBIOS: 84.04.31.00.dd
[     4.355] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     4.355] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     4.355] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-7) (Using EDID frequencies
[     4.355] (**) NVIDIA(0):     has been enabled on all display devices.)
[     4.363] (==) NVIDIA(0):
[     4.363] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     4.363] (==) NVIDIA(0):     will be used as the requested mode.
[     4.363] (==) NVIDIA(0):
[     4.365] (II) NVIDIA(0): Validated MetaModes:
[     4.365] (II) NVIDIA(0):     "DFP-7:nvidia-auto-select"
[     4.365] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     4.387] (--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X config
[     4.387] (--) NVIDIA(0):     option
[     4.387] (II) UnloadModule: "nouveau"
[     4.388] (II) Unloading nouveau
[     4.388] (II) UnloadModule: "modesetting"
[     4.388] (II) Unloading modesetting
[     4.388] (II) UnloadModule: "fbdev"
[     4.388] (II) Unloading fbdev
[     4.388] (II) UnloadSubModule: "fbdevhw"
[     4.388] (II) Unloading fbdevhw
[     4.388] (II) UnloadModule: "vesa"
[     4.388] (II) Unloading vesa
[     4.388] (--) Depth 24 pixmap format is 32 bpp
[     4.390] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     4.390] (II) NVIDIA:     access.
[     4.397] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     4.397] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     4.397] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     4.397] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     4.397] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     4.397] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     4.397] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     4.397] (II) NVIDIA(0):     Config Options in the README.
[     4.430] (II) NVIDIA(0): Setting mode "DFP-7:nvidia-auto-select"
[     4.489] (==) NVIDIA(0): Disabling shared memory pixmaps
[     4.489] (==) NVIDIA(0): Backing store enabled
[     4.489] (==) NVIDIA(0): Silken mouse enabled
[     4.491] (==) NVIDIA(0): DPMS enabled
[     4.492] (II) Loading sub module "dri2"
[     4.492] (II) LoadModule: "dri2"
[     4.492] (II) Module "dri2" already built-in
[     4.492] (II) NVIDIA(0): [DRI2] Setup complete
[     4.492] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     4.493] (--) RandR disabled
[     4.497] (II) SELinux: Disabled on system
[     4.498] (II) Initializing extension GLX
[     4.498] (II) Indirect GLX disabled.
[     4.567] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.567] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.567] (II) LoadModule: "libinput"
[     4.567] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.573] (II) Module libinput: vendor="X.Org Foundation"
[     4.573]     compiled for 1.18.4, module version = 0.22.0
[     4.573]     Module class: X.Org XInput Driver
[     4.573]     ABI class: X.Org XInput driver, version 22.1
[     4.573] (II) Using input driver 'libinput' for 'Power Button'
[     4.573] (**) Power Button: always reports core events
[     4.573] (**) Option "Device" "/dev/input/event2"
[     4.573] (**) Option "_source" "server/udev"
[     4.573] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.573] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     4.588] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event2"
[     4.588] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.588] (**) Option "xkb_model" "pc105"
[     4.588] (**) Option "xkb_layout" "fr"
[     4.588] (**) Option "xkb_variant" "latin9"
[     4.609] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.609] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     4.610] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     4.610] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.610] (II) Using input driver 'libinput' for 'Power Button'
[     4.610] (**) Power Button: always reports core events
[     4.610] (**) Option "Device" "/dev/input/event1"
[     4.610] (**) Option "_source" "server/udev"
[     4.610] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     4.610] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     4.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event1"
[     4.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     4.636] (**) Option "xkb_model" "pc105"
[     4.636] (**) Option "xkb_layout" "fr"
[     4.636] (**) Option "xkb_variant" "latin9"
[     4.636] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     4.636] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     4.636] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     4.636] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.636] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.636] (**) Sleep Button: always reports core events
[     4.637] (**) Option "Device" "/dev/input/event0"
[     4.637] (**) Option "_source" "server/udev"
[     4.637] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[     4.637] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[     4.652] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event0"
[     4.652] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     4.652] (**) Option "xkb_model" "pc105"
[     4.652] (**) Option "xkb_layout" "fr"
[     4.652] (**) Option "xkb_variant" "latin9"
[     4.652] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[     4.652] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[     4.653] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event6)
[     4.653] (II) No input driver specified, ignoring this device.
[     4.653] (II) This device may have been added with another device file.
[     4.653] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[     4.653] (II) No input driver specified, ignoring this device.
[     4.653] (II) This device may have been added with another device file.
[     4.653] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[     4.653] (II) No input driver specified, ignoring this device.
[     4.653] (II) This device may have been added with another device file.
[     4.653] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event5)
[     4.653] (II) No input driver specified, ignoring this device.
[     4.653] (II) This device may have been added with another device file.
[     4.654] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event9)
[     4.654] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     4.654] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     4.654] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     4.654] (**) Option "Device" "/dev/input/event9"
[     4.654] (**) Option "_source" "server/udev"
[     4.654] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is tagged by udev as: Keyboard
[     4.654] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is a keyboard
[     4.700] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:045E:0745.0003/input/input13/event9"
[     4.700] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 9)
[     4.700] (**) Option "xkb_model" "pc105"
[     4.700] (**) Option "xkb_layout" "fr"
[     4.700] (**) Option "xkb_variant" "latin9"
[     4.700] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is tagged by udev as: Keyboard
[     4.700] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is a keyboard
[     4.701] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event11)
[     4.701] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[     4.701] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     4.701] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     4.701] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     4.701] (**) Option "Device" "/dev/input/event11"
[     4.701] (**) Option "_source" "server/udev"
[     4.701] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is tagged by udev as: Keyboard Mouse
[     4.701] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a pointer caps
[     4.701] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a keyboard
[     4.748] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: needs a virtual subdevice
[     4.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:0745.0004/input/input17/event11"
[     4.748] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 10)
[     4.748] (**) Option "AccelerationScheme" "none"
[     4.748] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[     4.748] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[     4.748] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[     4.748] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is tagged by udev as: Keyboard Mouse
[     4.748] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a pointer caps
[     4.748] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a keyboard
[     4.749] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse1)
[     4.749] (II) No input driver specified, ignoring this device.
[     4.749] (II) This device may have been added with another device file.
[     4.749] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event22)
[     4.749] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     4.749] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     4.749] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     4.749] (**) Option "Device" "/dev/input/event22"
[     4.749] (**) Option "_source" "server/udev"
[     4.750] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is tagged by udev as: Keyboard Joystick
[     4.750] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is a keyboard
[     4.792] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: needs a virtual subdevice
[     4.792] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:0745.0005/input/input28/event22"
[     4.792] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 11)
[     4.792] (**) Option "AccelerationScheme" "none"
[     4.792] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[     4.792] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[     4.792] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[     4.792] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is tagged by udev as: Keyboard Joystick
[     4.792] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is a keyboard
[     4.793] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js1)
[     4.793] (II) No input driver specified, ignoring this device.
[     4.793] (II) This device may have been added with another device file.
[     4.793] (II) config/udev: Adding input device UVC Camera (046d:0809) (/dev/input/event23)
[     4.793] (**) UVC Camera (046d:0809): Applying InputClass "libinput keyboard catchall"
[     4.793] (II) Using input driver 'libinput' for 'UVC Camera (046d:0809)'
[     4.793] (**) UVC Camera (046d:0809): always reports core events
[     4.793] (**) Option "Device" "/dev/input/event23"
[     4.793] (**) Option "_source" "server/udev"
[     4.793] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is tagged by udev as: Keyboard
[     4.793] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is a keyboard
[     4.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input29/event23"
[     4.840] (II) XINPUT: Adding extended input device "UVC Camera (046d:0809)" (type: KEYBOARD, id 12)
[     4.840] (**) Option "xkb_model" "pc105"
[     4.840] (**) Option "xkb_layout" "fr"
[     4.840] (**) Option "xkb_variant" "latin9"
[     4.840] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is tagged by udev as: Keyboard
[     4.840] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is a keyboard
[     4.841] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pen (/dev/input/event10)
[     4.841] (**) Wacom Bamboo 16FG 6x8 Pen: Applying InputClass "Wacom USB tablet class"
[     4.841] (**) Wacom Bamboo 16FG 6x8 Pen: Applying InputClass "Wacom tablet class"
[     4.841] (II) LoadModule: "wacom"
[     4.841] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[     4.843] (II) Module wacom: vendor="X.Org Foundation"
[     4.843]     compiled for 1.18.4, module version = 0.33.0
[     4.843]     Module class: X.Org XInput Driver
[     4.843]     ABI class: X.Org XInput driver, version 22.1
[     4.843] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
    Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
    Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
    Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
    CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
    CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
    Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
    PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
    DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
    Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
    Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
    Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
    Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
    Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
    Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
    Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
    Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
    Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
    Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
    TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus  0x9F,
    TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
    TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
    TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C,
    TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002,
    usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027,
    usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032,
    usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036,
    usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051,
    usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055,
    usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500,
    usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001,
    usb:17ef:6004
[     4.844] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Pen'
[     4.844] (**) Wacom Bamboo 16FG 6x8 Pen: always reports core events
[     4.844] (**) Option "Device" "/dev/input/event10"
[     4.904] (II) Wacom Bamboo 16FG 6x8 Pen: type not specified, assuming 'stylus'.
[     4.904] (II) Wacom Bamboo 16FG 6x8 Pen: other types will be automatically added.
[     4.904] (--) Wacom Bamboo 16FG 6x8 Pen stylus: using pressure threshold of 27 for button 1
[     4.904] (--) Wacom Bamboo 16FG 6x8 Pen stylus: maxX=21648 maxY=13700 maxZ=1023 resX=100000 resY=100000  tilt=enabled
[     4.904] (II) Wacom Bamboo 16FG 6x8 Pen stylus: hotplugging dependent devices.
[     4.904] (EE) Wacom Bamboo 16FG 6x8 Pen stylus: Invalid type 'cursor' for this device.
[     4.904] (EE) Wacom Bamboo 16FG 6x8 Pen stylus: Invalid type 'touch' for this device.
[     4.904] (EE) Wacom Bamboo 16FG 6x8 Pen stylus: Invalid type 'pad' for this device.
[     4.904] (II) Wacom Bamboo 16FG 6x8 Pen stylus: hotplugging completed.
[     4.952] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:056A:00DF.0001/input/input14/event10"
[     4.952] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Pen stylus" (type: STYLUS, id 13)
[     4.952] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) keeping acceleration scheme 1
[     4.952] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) acceleration profile 0
[     4.952] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) acceleration factor: 2.000
[     4.952] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) acceleration threshold: 4
[     5.012] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pen (/dev/input/mouse0)
[     5.012] (II) No input driver specified, ignoring this device.
[     5.012] (II) This device may have been added with another device file.
[     5.013] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Finger (/dev/input/event12)
[     5.013] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "libinput touchpad catchall"
[     5.013] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom USB tablet class"
[     5.013] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom USB touchpad class"
[     5.013] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom tablet class"
[     5.013] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom touchpad class"
[     5.013] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Finger'
[     5.013] (**) Wacom Bamboo 16FG 6x8 Finger: always reports core events
[     5.013] (**) Option "Device" "/dev/input/event12"
[     5.072] (EE) Wacom Bamboo 16FG 6x8 Finger: Invalid type 'stylus' for this device.
[     5.072] (EE) Wacom Bamboo 16FG 6x8 Finger: Invalid type 'eraser' for this device.
[     5.072] (EE) Wacom Bamboo 16FG 6x8 Finger: Invalid type 'cursor' for this device.
[     5.072] (II) Wacom Bamboo 16FG 6x8 Finger: type not specified, assuming 'touch'.
[     5.072] (II) Wacom Bamboo 16FG 6x8 Finger: other types will be automatically added.
[     5.072] (--) Wacom Bamboo 16FG 6x8 Finger touch: maxX=4096 maxY=4096 maxZ=0 resX=19000 resY=30000
[     5.072] (II) Wacom Bamboo 16FG 6x8 Finger touch: hotplugging dependent devices.
[     5.072] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'stylus' for this device.
[     5.072] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'eraser' for this device.
[     5.072] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'cursor' for this device.
[     5.072] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'pad' for this device.
[     5.072] (II) Wacom Bamboo 16FG 6x8 Finger touch: hotplugging completed.
[     5.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:056A:00DF.0002/input/input19/event12"
[     5.112] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Finger touch" (type: TOUCH, id 14)
[     5.112] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) keeping acceleration scheme 1
[     5.112] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration profile 0
[     5.112] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration factor: 2.000
[     5.112] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration threshold: 4
[     5.172] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Finger (/dev/input/mouse2)
[     5.172] (II) No input driver specified, ignoring this device.
[     5.172] (II) This device may have been added with another device file.
[     5.173] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pad (/dev/input/event13)
[     5.173] (**) Wacom Bamboo 16FG 6x8 Pad: Applying InputClass "Wacom USB tablet class"
[     5.173] (**) Wacom Bamboo 16FG 6x8 Pad: Applying InputClass "Wacom tablet class"
[     5.173] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Pad'
[     5.173] (**) Wacom Bamboo 16FG 6x8 Pad: always reports core events
[     5.173] (**) Option "Device" "/dev/input/event13"
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'stylus' for this device.
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'eraser' for this device.
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'cursor' for this device.
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'touch' for this device.
[     5.173] (II) Wacom Bamboo 16FG 6x8 Pad: type not specified, assuming 'pad'.
[     5.173] (II) Wacom Bamboo 16FG 6x8 Pad: other types will be automatically added.
[     5.173] (II) Wacom Bamboo 16FG 6x8 Pad pad: hotplugging dependent devices.
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'stylus' for this device.
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'eraser' for this device.
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'cursor' for this device.
[     5.173] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'touch' for this device.
[     5.173] (II) Wacom Bamboo 16FG 6x8 Pad pad: hotplugging completed.
[     5.204] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:056A:00DF.0002/input/input20/event13"
[     5.204] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Pad pad" (type: PAD, id 15)
[     5.204] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) keeping acceleration scheme 1
[     5.204] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) acceleration profile 0
[     5.204] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) acceleration factor: 2.000
[     5.204] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) acceleration threshold: 4
[     5.204] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pad (/dev/input/js0)
[     5.204] (II) No input driver specified, ignoring this device.
[     5.204] (II) This device may have been added with another device file.
[     5.205] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pad (/dev/input/mouse3)
[     5.205] (II) No input driver specified, ignoring this device.
[     5.205] (II) This device may have been added with another device file.
[     5.205] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event15)
[     5.205] (II) No input driver specified, ignoring this device.
[     5.205] (II) This device may have been added with another device file.
[     5.205] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event16)
[     5.205] (II) No input driver specified, ignoring this device.
[     5.205] (II) This device may have been added with another device file.
[     5.206] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
[     5.206] (II) No input driver specified, ignoring this device.
[     5.206] (II) This device may have been added with another device file.
[     5.206] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event18)
[     5.206] (II) No input driver specified, ignoring this device.
[     5.206] (II) This device may have been added with another device file.
[     5.206] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event19)
[     5.206] (II) No input driver specified, ignoring this device.
[     5.206] (II) This device may have been added with another device file.
[     5.206] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event20)
[     5.206] (II) No input driver specified, ignoring this device.
[     5.206] (II) This device may have been added with another device file.
[     5.207] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event21)
[     5.207] (II) No input driver specified, ignoring this device.
[     5.207] (II) This device may have been added with another device file.
[     5.207] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[     5.207] (II) No input driver specified, ignoring this device.
[     5.207] (II) This device may have been added with another device file.
[     5.207] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[     5.207] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.207] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     5.207] (**) Eee PC WMI hotkeys: always reports core events
[     5.207] (**) Option "Device" "/dev/input/event4"
[     5.207] (**) Option "_source" "server/udev"
[     5.208] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     5.208] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[     5.224] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"
[     5.224] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 16)
[     5.224] (**) Option "xkb_model" "pc105"
[     5.224] (**) Option "xkb_layout" "fr"
[     5.224] (**) Option "xkb_variant" "latin9"
[     5.224] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     5.224] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[     5.225] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[     5.225] (II) No input driver specified, ignoring this device.
[     5.225] (II) This device may have been added with another device file.
[     5.227] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[     5.227] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     5.227] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     5.227] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     5.227] (**) Option "Device" "/dev/input/event11"
[     5.227] (**) Option "_source" "_driver/libinput"
[     5.227] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: is a virtual subdevice
[     5.227] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:0745.0004/input/input17/event11"
[     5.227] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 17)
[     5.227] (**) Option "xkb_model" "pc105"
[     5.227] (**) Option "xkb_layout" "fr"
[     5.227] (**) Option "xkb_variant" "latin9"
[     5.227] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     5.227] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     5.227] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     5.227] (**) Option "Device" "/dev/input/event22"
[     5.227] (**) Option "_source" "_driver/libinput"
[     5.227] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: is a virtual subdevice
[     5.228] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:0745.0005/input/input28/event22"
[     5.228] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 18)
[     5.228] (**) Option "xkb_model" "pc105"
[     5.228] (**) Option "xkb_layout" "fr"
[     5.228] (**) Option "xkb_variant" "latin9"
[     5.228] (**) Wacom Bamboo 16FG 6x8 Pen eraser: Applying InputClass "Wacom USB tablet class"
[     5.228] (**) Wacom Bamboo 16FG 6x8 Pen eraser: Applying InputClass "Wacom tablet class"
[     5.228] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Pen eraser'
[     5.228] (**) Wacom Bamboo 16FG 6x8 Pen eraser: always reports core events
[     5.228] (**) Option "Device" "/dev/input/event10"
[     5.228] (**) Option "Type" "eraser"
[     5.228] (--) Wacom Bamboo 16FG 6x8 Pen eraser: maxX=21648 maxY=13700 maxZ=1023 resX=100000 resY=100000  tilt=enabled
[     5.252] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:056A:00DF.0001/input/input14/event10"
[     5.252] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Pen eraser" (type: ERASER, id 19)
[     5.252] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) keeping acceleration scheme 1
[     5.252] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) acceleration profile 0
[     5.252] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) acceleration factor: 2.000
[     5.252] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) acceleration threshold: 4
[     5.253] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event5)
[     5.253] (II) No input driver specified, ignoring this device.
[     5.253] (II) This device may have been added with another device file.
[     5.253] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[     5.253] (II) No input driver specified, ignoring this device.
[     5.253] (II) This device may have been added with another device file.
[     5.253] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[     5.253] (II) No input driver specified, ignoring this device.
[     5.253] (II) This device may have been added with another device file.
[     5.253] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event6)
[     5.253] (II) No input driver specified, ignoring this device.
[     5.253] (II) This device may have been added with another device file.
[     5.254] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pen (/dev/input/mouse0)
[     5.254] (II) No input driver specified, ignoring this device.
[     5.254] (II) This device may have been added with another device file.
[     5.254] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pad (/dev/input/mouse3)
[     5.254] (II) No input driver specified, ignoring this device.
[     5.254] (II) This device may have been added with another device file.
[     5.255] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Finger (/dev/input/mouse2)
[     5.255] (II) No input driver specified, ignoring this device.
[     5.255] (II) This device may have been added with another device file.
[     5.255] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pad (/dev/input/js0)
[     5.255] (II) No input driver specified, ignoring this device.
[     5.255] (II) This device may have been added with another device file.
[     5.256] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event21)
[     5.256] (II) No input driver specified, ignoring this device.
[     5.256] (II) This device may have been added with another device file.
[     5.256] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event18)
[     5.256] (II) No input driver specified, ignoring this device.
[     5.256] (II) This device may have been added with another device file.
[     5.256] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
[     5.256] (II) No input driver specified, ignoring this device.
[     5.256] (II) This device may have been added with another device file.
[     5.256] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event14)
[     5.256] (II) No input driver specified, ignoring this device.
[     5.256] (II) This device may have been added with another device file.
[     5.256] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event20)
[     5.256] (II) No input driver specified, ignoring this device.
[     5.256] (II) This device may have been added with another device file.
[     5.257] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event19)
[     5.257] (II) No input driver specified, ignoring this device.
[     5.257] (II) This device may have been added with another device file.
[     5.257] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event16)
[     5.257] (II) No input driver specified, ignoring this device.
[     5.257] (II) This device may have been added with another device file.
[     5.257] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event15)
[     5.257] (II) No input driver specified, ignoring this device.
[     5.257] (II) This device may have been added with another device file.
[     5.257] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/mouse1)
[     5.257] (II) No input driver specified, ignoring this device.
[     5.257] (II) This device may have been added with another device file.
[     5.257] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/js1)
[     5.257] (II) No input driver specified, ignoring this device.
[     5.257] (II) This device may have been added with another device file.
[     5.258] (II) config/udev: removing device Wacom Bamboo 16FG 6x8 Pad pad
[     5.312] (II) UnloadModule: "wacom"
[     5.312] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pad (/dev/input/event13)
[     5.312] (**) Wacom Bamboo 16FG 6x8 Pad: Applying InputClass "Wacom USB tablet class"
[     5.312] (**) Wacom Bamboo 16FG 6x8 Pad: Applying InputClass "Wacom tablet class"
[     5.312] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Pad'
[     5.312] (**) Wacom Bamboo 16FG 6x8 Pad: always reports core events
[     5.312] (**) Option "Device" "/dev/input/event13"
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'stylus' for this device.
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'eraser' for this device.
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'cursor' for this device.
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad: Invalid type 'touch' for this device.
[     5.312] (II) Wacom Bamboo 16FG 6x8 Pad: type not specified, assuming 'pad'.
[     5.312] (II) Wacom Bamboo 16FG 6x8 Pad: other types will be automatically added.
[     5.312] (II) Wacom Bamboo 16FG 6x8 Pad pad: hotplugging dependent devices.
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'stylus' for this device.
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'eraser' for this device.
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'cursor' for this device.
[     5.312] (EE) Wacom Bamboo 16FG 6x8 Pad pad: Invalid type 'touch' for this device.
[     5.312] (II) Wacom Bamboo 16FG 6x8 Pad pad: hotplugging completed.
[     5.364] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:056A:00DF.0002/input/input20/event13"
[     5.364] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Pad pad" (type: PAD, id 15)
[     5.364] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) keeping acceleration scheme 1
[     5.364] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) acceleration profile 0
[     5.364] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) acceleration factor: 2.000
[     5.364] (**) Wacom Bamboo 16FG 6x8 Pad pad: (accel) acceleration threshold: 4
[     5.364] (II) config/udev: removing device Wacom Bamboo 16FG 6x8 Pen stylus
[     5.364] (II) UnloadModule: "wacom"
[     5.364] (II) config/udev: removing device Wacom Bamboo 16FG 6x8 Pen eraser
[     5.400] (II) UnloadModule: "wacom"
[     5.400] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Pen (/dev/input/event10)
[     5.400] (**) Wacom Bamboo 16FG 6x8 Pen: Applying InputClass "Wacom USB tablet class"
[     5.400] (**) Wacom Bamboo 16FG 6x8 Pen: Applying InputClass "Wacom tablet class"
[     5.400] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Pen'
[     5.400] (**) Wacom Bamboo 16FG 6x8 Pen: always reports core events
[     5.400] (**) Option "Device" "/dev/input/event10"
[     5.460] (II) Wacom Bamboo 16FG 6x8 Pen: type not specified, assuming 'stylus'.
[     5.460] (II) Wacom Bamboo 16FG 6x8 Pen: other types will be automatically added.
[     5.460] (--) Wacom Bamboo 16FG 6x8 Pen stylus: using pressure threshold of 27 for button 1
[     5.460] (--) Wacom Bamboo 16FG 6x8 Pen stylus: maxX=21648 maxY=13700 maxZ=1023 resX=100000 resY=100000  tilt=enabled
[     5.460] (II) Wacom Bamboo 16FG 6x8 Pen stylus: hotplugging dependent devices.
[     5.460] (EE) Wacom Bamboo 16FG 6x8 Pen stylus: Invalid type 'cursor' for this device.
[     5.460] (EE) Wacom Bamboo 16FG 6x8 Pen stylus: Invalid type 'touch' for this device.
[     5.460] (EE) Wacom Bamboo 16FG 6x8 Pen stylus: Invalid type 'pad' for this device.
[     5.460] (II) Wacom Bamboo 16FG 6x8 Pen stylus: hotplugging completed.
[     5.492] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:056A:00DF.0001/input/input14/event10"
[     5.492] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Pen stylus" (type: STYLUS, id 13)
[     5.492] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) keeping acceleration scheme 1
[     5.492] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) acceleration profile 0
[     5.492] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) acceleration factor: 2.000
[     5.492] (**) Wacom Bamboo 16FG 6x8 Pen stylus: (accel) acceleration threshold: 4
[     5.552] (**) Wacom Bamboo 16FG 6x8 Pen eraser: Applying InputClass "Wacom USB tablet class"
[     5.552] (**) Wacom Bamboo 16FG 6x8 Pen eraser: Applying InputClass "Wacom tablet class"
[     5.552] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Pen eraser'
[     5.552] (**) Wacom Bamboo 16FG 6x8 Pen eraser: always reports core events
[     5.552] (**) Option "Device" "/dev/input/event10"
[     5.552] (**) Option "Type" "eraser"
[     5.552] (--) Wacom Bamboo 16FG 6x8 Pen eraser: maxX=21648 maxY=13700 maxZ=1023 resX=100000 resY=100000  tilt=enabled
[     5.576] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:056A:00DF.0001/input/input14/event10"
[     5.576] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Pen eraser" (type: ERASER, id 19)
[     5.576] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) keeping acceleration scheme 1
[     5.576] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) acceleration profile 0
[     5.576] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) acceleration factor: 2.000
[     5.576] (**) Wacom Bamboo 16FG 6x8 Pen eraser: (accel) acceleration threshold: 4
[     5.576] (II) config/udev: removing device Wacom Bamboo 16FG 6x8 Finger touch
[     5.640] (II) UnloadModule: "wacom"
[     5.640] (II) config/udev: Adding input device Wacom Bamboo 16FG 6x8 Finger (/dev/input/event12)
[     5.640] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "libinput touchpad catchall"
[     5.640] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom USB tablet class"
[     5.640] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom USB touchpad class"
[     5.640] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom tablet class"
[     5.640] (**) Wacom Bamboo 16FG 6x8 Finger: Applying InputClass "Wacom touchpad class"
[     5.640] (II) Using input driver 'wacom' for 'Wacom Bamboo 16FG 6x8 Finger'
[     5.640] (**) Wacom Bamboo 16FG 6x8 Finger: always reports core events
[     5.640] (**) Option "Device" "/dev/input/event12"
[     5.640] (EE) Wacom Bamboo 16FG 6x8 Finger: Invalid type 'stylus' for this device.
[     5.640] (EE) Wacom Bamboo 16FG 6x8 Finger: Invalid type 'eraser' for this device.
[     5.640] (EE) Wacom Bamboo 16FG 6x8 Finger: Invalid type 'cursor' for this device.
[     5.640] (II) Wacom Bamboo 16FG 6x8 Finger: type not specified, assuming 'touch'.
[     5.640] (II) Wacom Bamboo 16FG 6x8 Finger: other types will be automatically added.
[     5.640] (--) Wacom Bamboo 16FG 6x8 Finger touch: maxX=4096 maxY=4096 maxZ=0 resX=19000 resY=30000
[     5.640] (II) Wacom Bamboo 16FG 6x8 Finger touch: hotplugging dependent devices.
[     5.640] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'stylus' for this device.
[     5.640] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'eraser' for this device.
[     5.640] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'cursor' for this device.
[     5.640] (EE) Wacom Bamboo 16FG 6x8 Finger touch: Invalid type 'pad' for this device.
[     5.640] (II) Wacom Bamboo 16FG 6x8 Finger touch: hotplugging completed.
[     5.692] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:056A:00DF.0002/input/input19/event12"
[     5.692] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Finger touch" (type: TOUCH, id 14)
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) keeping acceleration scheme 1
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration profile 0
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration factor: 2.000
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration threshold: 4
[     5.692] (II) config/udev: removing device Microsoft Microsoft® 2.4GHz Transceiver v8.0
[     5.692] (II) UnloadModule: "libinput"
[     5.692] (II) config/udev: removing device Microsoft Microsoft® 2.4GHz Transceiver v8.0
[     5.732] (II) UnloadModule: "libinput"
[     5.732] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event22)
[     5.732] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     5.732] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     5.732] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     5.732] (**) Option "Device" "/dev/input/event22"
[     5.732] (**) Option "_source" "server/udev"
[     5.733] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is tagged by udev as: Keyboard Joystick
[     5.733] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is a keyboard
[     5.780] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: needs a virtual subdevice
[     5.780] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:0745.0005/input/input28/event22"
[     5.780] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 11)
[     5.780] (**) Option "AccelerationScheme" "none"
[     5.780] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[     5.780] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[     5.780] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[     5.780] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is tagged by udev as: Keyboard Joystick
[     5.780] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event22 is a keyboard
[     5.780] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     5.780] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     5.780] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     5.780] (**) Option "Device" "/dev/input/event22"
[     5.780] (**) Option "_source" "_driver/libinput"
[     5.780] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: is a virtual subdevice
[     5.780] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:0745.0005/input/input28/event22"
[     5.780] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 18)
[     5.781] (**) Option "xkb_model" "pc105"
[     5.781] (**) Option "xkb_layout" "fr"
[     5.781] (**) Option "xkb_variant" "latin9"
[     5.781] (WW) Option "xkb_options" requires a string value
[     5.781] (II) config/udev: removing device Microsoft Microsoft® 2.4GHz Transceiver v8.0
[     5.781] (II) UnloadModule: "libinput"
[     5.781] (II) config/udev: removing device Microsoft Microsoft® 2.4GHz Transceiver v8.0
[     5.828] (II) UnloadModule: "libinput"
[     5.828] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event11)
[     5.828] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[     5.828] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     5.828] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     5.828] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     5.828] (**) Option "Device" "/dev/input/event11"
[     5.828] (**) Option "_source" "server/udev"
[     5.829] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is tagged by udev as: Keyboard Mouse
[     5.829] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a pointer caps
[     5.829] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a keyboard
[     5.876] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: needs a virtual subdevice
[     5.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:0745.0004/input/input17/event11"
[     5.876] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: MOUSE, id 10)
[     5.876] (**) Option "AccelerationScheme" "none"
[     5.876] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) selected scheme none/0
[     5.876] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration factor: 2.000
[     5.876] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: (accel) acceleration threshold: 4
[     5.876] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is tagged by udev as: Keyboard Mouse
[     5.876] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a pointer caps
[     5.876] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event11 is a keyboard
[     5.876] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput pointer catchall"
[     5.876] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     5.876] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     5.876] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     5.876] (**) Option "Device" "/dev/input/event11"
[     5.876] (**) Option "_source" "_driver/libinput"
[     5.876] (II) libinput: Microsoft Microsoft® 2.4GHz Transceiver v8.0: is a virtual subdevice
[     5.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:0745.0004/input/input17/event11"
[     5.876] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 17)
[     5.877] (**) Option "xkb_model" "pc105"
[     5.877] (**) Option "xkb_layout" "fr"
[     5.877] (**) Option "xkb_variant" "latin9"
[     5.877] (WW) Option "xkb_options" requires a string value
[     5.877] (II) config/udev: removing device Microsoft Microsoft® 2.4GHz Transceiver v8.0
[     5.924] (II) UnloadModule: "libinput"
[     5.924] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v8.0 (/dev/input/event9)
[     5.924] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: Applying InputClass "libinput keyboard catchall"
[     5.924] (II) Using input driver 'libinput' for 'Microsoft Microsoft® 2.4GHz Transceiver v8.0'
[     5.924] (**) Microsoft Microsoft® 2.4GHz Transceiver v8.0: always reports core events
[     5.924] (**) Option "Device" "/dev/input/event9"
[     5.924] (**) Option "_source" "server/udev"
[     5.925] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is tagged by udev as: Keyboard
[     5.925] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is a keyboard
[     5.976] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:045E:0745.0003/input/input13/event9"
[     5.976] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v8.0" (type: KEYBOARD, id 9)
[     5.976] (**) Option "xkb_model" "pc105"
[     5.976] (**) Option "xkb_layout" "fr"
[     5.976] (**) Option "xkb_variant" "latin9"
[     5.976] (WW) Option "xkb_options" requires a string value
[     5.976] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is tagged by udev as: Keyboard
[     5.976] (II) input device 'Microsoft Microsoft® 2.4GHz Transceiver v8.0', /dev/input/event9 is a keyboard
[     5.977] (II) config/udev: removing device UVC Camera (046d:0809)
[     6.024] (II) UnloadModule: "libinput"
[     6.024] (II) config/udev: Adding input device UVC Camera (046d:0809) (/dev/input/event23)
[     6.024] (**) UVC Camera (046d:0809): Applying InputClass "libinput keyboard catchall"
[     6.024] (II) Using input driver 'libinput' for 'UVC Camera (046d:0809)'
[     6.024] (**) UVC Camera (046d:0809): always reports core events
[     6.024] (**) Option "Device" "/dev/input/event23"
[     6.024] (**) Option "_source" "server/udev"
[     6.025] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is tagged by udev as: Keyboard
[     6.025] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is a keyboard
[     6.072] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input29/event23"
[     6.072] (II) XINPUT: Adding extended input device "UVC Camera (046d:0809)" (type: KEYBOARD, id 12)
[     6.072] (**) Option "xkb_model" "pc105"
[     6.072] (**) Option "xkb_layout" "fr"
[     6.072] (**) Option "xkb_variant" "latin9"
[     6.072] (WW) Option "xkb_options" requires a string value
[     6.072] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is tagged by udev as: Keyboard
[     6.072] (II) input device 'UVC Camera (046d:0809)', /dev/input/event23 is a keyboard
[    25.338] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    25.338] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    25.338] (--) NVIDIA(GPU-0):
[    25.341] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    25.341] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    25.341] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    25.341] (--) NVIDIA(GPU-0):
[    25.341] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    25.341] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    25.341] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[    25.341] (--) NVIDIA(GPU-0):
[    25.341] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    25.341] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    25.341] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[    25.341] (--) NVIDIA(GPU-0):
[    25.342] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    25.342] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    25.342] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[    25.342] (--) NVIDIA(GPU-0):
[    25.342] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    25.342] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    25.342] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    25.342] (--) NVIDIA(GPU-0):
[    25.342] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    25.342] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    25.342] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[    25.342] (--) NVIDIA(GPU-0):
[    25.342] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    25.342] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    25.342] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    25.342] (--) NVIDIA(GPU-0):
[    25.410] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[    25.410] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[    25.410] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[    25.410] (--) NVIDIA(GPU-0):
[    25.413] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    25.413] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    25.413] (--) NVIDIA(GPU-0):
[    25.416] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    25.416] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    25.416] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    25.416] (--) NVIDIA(GPU-0):
[    25.416] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    25.416] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    25.416] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[    25.416] (--) NVIDIA(GPU-0):
[    25.416] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    25.416] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    25.416] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[    25.416] (--) NVIDIA(GPU-0):
[    25.416] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    25.416] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    25.416] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[    25.416] (--) NVIDIA(GPU-0):
[    25.416] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    25.416] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    25.416] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    25.416] (--) NVIDIA(GPU-0):
[    25.417] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    25.417] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    25.417] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[    25.417] (--) NVIDIA(GPU-0):
[    25.417] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    25.417] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    25.417] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    25.417] (--) NVIDIA(GPU-0):
[    25.485] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[    25.485] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[    25.485] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[    25.485] (--) NVIDIA(GPU-0):
[    25.491] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    25.491] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    25.491] (--) NVIDIA(GPU-0):
[    25.493] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    25.493] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    25.493] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    25.493] (--) NVIDIA(GPU-0):
[    25.493] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    25.493] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    25.493] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[    25.493] (--) NVIDIA(GPU-0):
[    25.493] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    25.493] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    25.493] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[    25.493] (--) NVIDIA(GPU-0):
[    25.494] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    25.494] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    25.494] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[    25.494] (--) NVIDIA(GPU-0):
[    25.494] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    25.494] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    25.494] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    25.494] (--) NVIDIA(GPU-0):
[    25.494] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    25.494] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    25.494] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[    25.494] (--) NVIDIA(GPU-0):
[    25.494] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    25.494] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    25.494] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    25.494] (--) NVIDIA(GPU-0):
[    25.561] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[    25.561] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[    25.561] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[    25.561] (--) NVIDIA(GPU-0):
[    25.783] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    25.783] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    25.783] (--) NVIDIA(GPU-0):
[    25.788] (--) NVIDIA(GPU-0): DFP-0: disconnected
[    25.788] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[    25.788] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    25.788] (--) NVIDIA(GPU-0):
[    25.788] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    25.788] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[    25.788] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[    25.788] (--) NVIDIA(GPU-0):
[    25.788] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    25.788] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    25.788] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[    25.788] (--) NVIDIA(GPU-0):
[    25.788] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    25.788] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    25.788] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[    25.788] (--) NVIDIA(GPU-0):
[    25.788] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    25.788] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[    25.788] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[    25.788] (--) NVIDIA(GPU-0):
[    25.788] (--) NVIDIA(GPU-0): DFP-5: disconnected
[    25.788] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[    25.788] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[    25.788] (--) NVIDIA(GPU-0):
[    25.789] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    25.789] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    25.789] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    25.789] (--) NVIDIA(GPU-0):
[    25.856] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[    25.856] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[    25.856] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[    25.856] (--) NVIDIA(GPU-0):
[   139.545] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   139.545] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   139.545] (--) NVIDIA(GPU-0):
[   139.548] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   139.548] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   139.548] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   139.548] (--) NVIDIA(GPU-0):
[   139.548] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   139.548] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   139.548] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[   139.548] (--) NVIDIA(GPU-0):
[   139.548] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   139.548] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   139.548] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[   139.548] (--) NVIDIA(GPU-0):
[   139.548] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   139.548] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   139.548] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[   139.548] (--) NVIDIA(GPU-0):
[   139.548] (--) NVIDIA(GPU-0): DFP-4: disconnected
[   139.548] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[   139.548] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[   139.548] (--) NVIDIA(GPU-0):
[   139.548] (--) NVIDIA(GPU-0): DFP-5: disconnected
[   139.548] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[   139.548] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[   139.548] (--) NVIDIA(GPU-0):
[   139.549] (--) NVIDIA(GPU-0): DFP-6: disconnected
[   139.549] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[   139.549] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[   139.549] (--) NVIDIA(GPU-0):
[   139.615] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[   139.615] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[   139.615] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[   139.615] (--) NVIDIA(GPU-0):
[   444.968] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   444.968] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   444.968] (--) NVIDIA(GPU-0):
[   444.971] (--) NVIDIA(GPU-0): DFP-0: disconnected
[   444.971] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[   444.971] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[   444.971] (--) NVIDIA(GPU-0):
[   444.971] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   444.971] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   444.971] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[   444.971] (--) NVIDIA(GPU-0):
[   444.971] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   444.971] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   444.971] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[   444.971] (--) NVIDIA(GPU-0):
[   444.971] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   444.971] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   444.971] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[   444.971] (--) NVIDIA(GPU-0):
[   444.971] (--) NVIDIA(GPU-0): DFP-4: disconnected
[   444.971] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[   444.971] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[   444.971] (--) NVIDIA(GPU-0):
[   444.971] (--) NVIDIA(GPU-0): DFP-5: disconnected
[   444.971] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[   444.971] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[   444.971] (--) NVIDIA(GPU-0):
[   444.971] (--) NVIDIA(GPU-0): DFP-6: disconnected
[   444.971] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[   444.971] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[   444.971] (--) NVIDIA(GPU-0):
[   445.038] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[   445.038] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[   445.038] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[   445.038] (--) NVIDIA(GPU-0):
[  3328.947] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3328.947] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3328.948] (--) NVIDIA(GPU-0):
[  3328.951] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3328.951] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3328.951] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3328.951] (--) NVIDIA(GPU-0):
[  3328.951] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3328.951] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3328.951] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3328.951] (--) NVIDIA(GPU-0):
[  3328.951] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3328.951] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3328.951] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3328.951] (--) NVIDIA(GPU-0):
[  3328.951] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3328.951] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3328.951] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3328.951] (--) NVIDIA(GPU-0):
[  3328.951] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3328.951] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3328.951] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3328.951] (--) NVIDIA(GPU-0):
[  3328.952] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3328.952] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3328.952] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3328.952] (--) NVIDIA(GPU-0):
[  3328.952] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3328.952] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3328.952] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3328.952] (--) NVIDIA(GPU-0):
[  3329.019] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3329.019] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3329.019] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3329.019] (--) NVIDIA(GPU-0):
[  3329.023] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3329.023] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3329.023] (--) NVIDIA(GPU-0):
[  3329.026] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3329.026] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3329.026] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3329.026] (--) NVIDIA(GPU-0):
[  3329.026] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3329.026] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3329.026] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3329.026] (--) NVIDIA(GPU-0):
[  3329.026] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3329.026] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3329.026] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3329.026] (--) NVIDIA(GPU-0):
[  3329.026] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3329.026] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3329.026] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3329.026] (--) NVIDIA(GPU-0):
[  3329.026] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3329.026] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3329.026] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3329.026] (--) NVIDIA(GPU-0):
[  3329.026] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3329.026] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3329.026] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3329.026] (--) NVIDIA(GPU-0):
[  3329.026] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3329.026] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3329.026] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3329.026] (--) NVIDIA(GPU-0):
[  3329.092] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3329.092] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3329.092] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3329.092] (--) NVIDIA(GPU-0):
[  3329.124] (II) NVIDIA(0): Setting mode "NULL"
[  3329.214] (II) NVIDIA(0): Setting mode "DP-5: 1152x864 @1152x864 +0+0 {ViewPortIn=1152x864, ViewPortOut=1152x864+0+0}"
[  3334.453] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3334.453] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3334.453] (--) NVIDIA(GPU-0):
[  3334.456] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3334.456] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3334.456] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3334.456] (--) NVIDIA(GPU-0):
[  3334.456] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3334.456] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3334.456] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3334.456] (--) NVIDIA(GPU-0):
[  3334.456] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3334.456] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3334.456] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3334.456] (--) NVIDIA(GPU-0):
[  3334.456] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3334.456] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3334.456] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3334.456] (--) NVIDIA(GPU-0):
[  3334.456] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3334.456] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3334.456] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3334.456] (--) NVIDIA(GPU-0):
[  3334.456] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3334.456] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3334.456] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3334.456] (--) NVIDIA(GPU-0):
[  3334.456] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3334.456] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3334.456] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3334.456] (--) NVIDIA(GPU-0):
[  3334.519] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3334.519] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3334.519] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3334.519] (--) NVIDIA(GPU-0):
[  3334.571] (II) NVIDIA(0): Setting mode "DP-5: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[  3353.855] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3353.855] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3353.855] (--) NVIDIA(GPU-0):
[  3353.858] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3353.858] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3353.858] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3353.858] (--) NVIDIA(GPU-0):
[  3353.858] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3353.858] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3353.858] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3353.858] (--) NVIDIA(GPU-0):
[  3353.858] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3353.858] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3353.858] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3353.858] (--) NVIDIA(GPU-0):
[  3353.859] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3353.859] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3353.859] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3353.859] (--) NVIDIA(GPU-0):
[  3353.859] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3353.859] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3353.859] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3353.859] (--) NVIDIA(GPU-0):
[  3353.859] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3353.859] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3353.859] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3353.859] (--) NVIDIA(GPU-0):
[  3353.859] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3353.859] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3353.859] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3353.859] (--) NVIDIA(GPU-0):
[  3353.926] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3353.926] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3353.926] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3353.926] (--) NVIDIA(GPU-0):
[  3353.930] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3353.930] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3353.930] (--) NVIDIA(GPU-0):
[  3353.933] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3353.933] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3353.933] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3353.933] (--) NVIDIA(GPU-0):
[  3353.933] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3353.933] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3353.933] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3353.933] (--) NVIDIA(GPU-0):
[  3353.933] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3353.933] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3353.933] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3353.933] (--) NVIDIA(GPU-0):
[  3353.933] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3353.933] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3353.933] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3353.933] (--) NVIDIA(GPU-0):
[  3353.933] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3353.933] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3353.933] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3353.933] (--) NVIDIA(GPU-0):
[  3353.933] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3353.933] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3353.933] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3353.933] (--) NVIDIA(GPU-0):
[  3353.933] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3353.933] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3353.933] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3353.933] (--) NVIDIA(GPU-0):
[  3353.999] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3353.999] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3353.999] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3353.999] (--) NVIDIA(GPU-0):
[  3354.027] (II) NVIDIA(0): Setting mode "NULL"
[  3354.127] (II) NVIDIA(0): Setting mode "DP-5: 640x480_60 @640x480 +0+0 {ViewPortIn=640x480, ViewPortOut=640x480+0+0}"
[  3384.304] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3384.304] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3384.304] (--) NVIDIA(GPU-0):
[  3384.307] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3384.307] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3384.307] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3384.307] (--) NVIDIA(GPU-0):
[  3384.307] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3384.307] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3384.307] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3384.307] (--) NVIDIA(GPU-0):
[  3384.307] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3384.307] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3384.307] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3384.307] (--) NVIDIA(GPU-0):
[  3384.307] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3384.307] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3384.307] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3384.307] (--) NVIDIA(GPU-0):
[  3384.307] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3384.307] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3384.307] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3384.307] (--) NVIDIA(GPU-0):
[  3384.307] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3384.307] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3384.307] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3384.307] (--) NVIDIA(GPU-0):
[  3384.307] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3384.307] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3384.307] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3384.307] (--) NVIDIA(GPU-0):
[  3384.373] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3384.373] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3384.373] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3384.373] (--) NVIDIA(GPU-0):
[  3384.439] (II) NVIDIA(0): Setting mode "DP-5: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[  3393.172] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3393.172] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3393.172] (--) NVIDIA(GPU-0):
[  3393.175] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3393.175] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3393.175] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3393.175] (--) NVIDIA(GPU-0):
[  3393.176] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3393.176] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3393.176] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3393.176] (--) NVIDIA(GPU-0):
[  3393.176] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3393.176] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3393.176] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3393.176] (--) NVIDIA(GPU-0):
[  3393.176] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3393.176] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3393.176] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3393.176] (--) NVIDIA(GPU-0):
[  3393.176] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3393.176] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3393.176] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3393.176] (--) NVIDIA(GPU-0):
[  3393.176] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3393.176] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3393.176] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3393.176] (--) NVIDIA(GPU-0):
[  3393.176] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3393.176] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3393.176] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3393.176] (--) NVIDIA(GPU-0):
[  3393.243] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3393.243] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3393.243] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3393.243] (--) NVIDIA(GPU-0):
[  3393.247] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3393.247] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3393.247] (--) NVIDIA(GPU-0):
[  3393.250] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3393.250] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3393.250] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3393.250] (--) NVIDIA(GPU-0):
[  3393.250] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3393.250] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3393.250] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3393.250] (--) NVIDIA(GPU-0):
[  3393.250] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3393.250] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3393.250] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3393.250] (--) NVIDIA(GPU-0):
[  3393.250] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3393.250] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3393.250] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3393.250] (--) NVIDIA(GPU-0):
[  3393.250] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3393.250] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3393.250] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3393.250] (--) NVIDIA(GPU-0):
[  3393.250] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3393.250] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3393.250] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3393.250] (--) NVIDIA(GPU-0):
[  3393.250] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3393.250] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3393.250] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3393.250] (--) NVIDIA(GPU-0):
[  3393.316] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3393.316] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3393.316] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3393.316] (--) NVIDIA(GPU-0):
[  3796.768] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3796.768] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3796.768] (--) NVIDIA(GPU-0):
[  3796.771] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3796.771] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3796.771] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3796.771] (--) NVIDIA(GPU-0):
[  3796.771] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3796.771] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3796.771] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3796.771] (--) NVIDIA(GPU-0):
[  3796.771] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3796.771] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3796.771] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3796.771] (--) NVIDIA(GPU-0):
[  3796.771] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3796.771] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3796.771] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3796.771] (--) NVIDIA(GPU-0):
[  3796.771] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3796.771] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3796.771] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3796.771] (--) NVIDIA(GPU-0):
[  3796.771] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3796.771] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3796.771] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3796.771] (--) NVIDIA(GPU-0):
[  3796.771] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3796.771] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3796.771] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3796.771] (--) NVIDIA(GPU-0):
[  3796.838] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3796.838] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3796.838] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3796.838] (--) NVIDIA(GPU-0):
[  3857.298] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  3857.298] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  3857.298] (--) NVIDIA(GPU-0):
[  3857.300] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  3857.300] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  3857.300] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  3857.300] (--) NVIDIA(GPU-0):
[  3857.300] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  3857.300] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  3857.300] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  3857.300] (--) NVIDIA(GPU-0):
[  3857.300] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  3857.300] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  3857.300] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  3857.300] (--) NVIDIA(GPU-0):
[  3857.300] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  3857.300] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  3857.300] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  3857.300] (--) NVIDIA(GPU-0):
[  3857.301] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  3857.301] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  3857.301] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  3857.301] (--) NVIDIA(GPU-0):
[  3857.301] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  3857.301] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  3857.301] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  3857.301] (--) NVIDIA(GPU-0):
[  3857.301] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  3857.301] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  3857.301] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  3857.301] (--) NVIDIA(GPU-0):
[  3857.369] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3857.369] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3857.369] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  3857.369] (--) NVIDIA(GPU-0):
[  6936.626] (--) NVIDIA(GPU-0): CRT-0: disconnected
[  6936.626] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[  6936.626] (--) NVIDIA(GPU-0):
[  6936.629] (--) NVIDIA(GPU-0): DFP-0: disconnected
[  6936.629] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[  6936.629] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  6936.629] (--) NVIDIA(GPU-0):
[  6936.629] (--) NVIDIA(GPU-0): DFP-1: disconnected
[  6936.629] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[  6936.629] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[  6936.629] (--) NVIDIA(GPU-0):
[  6936.629] (--) NVIDIA(GPU-0): DFP-2: disconnected
[  6936.629] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[  6936.629] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[  6936.629] (--) NVIDIA(GPU-0):
[  6936.629] (--) NVIDIA(GPU-0): DFP-3: disconnected
[  6936.629] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[  6936.629] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[  6936.629] (--) NVIDIA(GPU-0):
[  6936.629] (--) NVIDIA(GPU-0): DFP-4: disconnected
[  6936.629] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[  6936.629] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[  6936.629] (--) NVIDIA(GPU-0):
[  6936.629] (--) NVIDIA(GPU-0): DFP-5: disconnected
[  6936.629] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[  6936.629] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[  6936.629] (--) NVIDIA(GPU-0):
[  6936.630] (--) NVIDIA(GPU-0): DFP-6: disconnected
[  6936.630] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[  6936.630] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[  6936.630] (--) NVIDIA(GPU-0):
[  6936.697] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  6936.697] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  6936.697] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[  6936.697] (--) NVIDIA(GPU-0):
[ 10684.764] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 10684.764] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 10684.764] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 10684.764] (--) NVIDIA(GPU-0):
[ 10684.829] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 10684.829] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 10684.829] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 10684.829] (--) NVIDIA(GPU-0):
[ 10980.002] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 10980.002] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 10980.002] (--) NVIDIA(GPU-0):
[ 10980.005] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 10980.005] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 10980.005] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 10980.005] (--) NVIDIA(GPU-0):
[ 10980.005] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 10980.005] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 10980.005] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 10980.005] (--) NVIDIA(GPU-0):
[ 10980.005] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 10980.005] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 10980.005] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 10980.005] (--) NVIDIA(GPU-0):
[ 10980.005] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 10980.005] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 10980.005] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 10980.005] (--) NVIDIA(GPU-0):
[ 10980.006] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 10980.006] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 10980.006] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 10980.006] (--) NVIDIA(GPU-0):
[ 10980.006] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 10980.006] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 10980.006] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[ 10980.006] (--) NVIDIA(GPU-0):
[ 10980.006] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 10980.006] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 10980.006] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 10980.006] (--) NVIDIA(GPU-0):
[ 10980.071] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 10980.071] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 10980.071] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 10980.071] (--) NVIDIA(GPU-0):
[ 13339.589] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 13339.589] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 13339.589] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 13339.589] (--) NVIDIA(GPU-0):
[ 13339.594] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 13339.594] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 13339.594] (--) NVIDIA(GPU-0):
[ 13339.597] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 13339.597] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 13339.597] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 13339.597] (--) NVIDIA(GPU-0):
[ 13339.597] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 13339.597] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 13339.597] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 13339.597] (--) NVIDIA(GPU-0):
[ 13339.597] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 13339.597] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 13339.597] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 13339.597] (--) NVIDIA(GPU-0):
[ 13339.597] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 13339.597] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 13339.597] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 13339.597] (--) NVIDIA(GPU-0):
[ 13339.597] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 13339.597] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 13339.597] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 13339.597] (--) NVIDIA(GPU-0):
[ 13339.597] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 13339.597] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 13339.597] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[ 13339.597] (--) NVIDIA(GPU-0):
[ 13339.597] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 13339.597] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 13339.597] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 13339.597] (--) NVIDIA(GPU-0):
[ 13339.604] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 13339.604] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 13339.604] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 13339.604] (--) NVIDIA(GPU-0):
[ 13341.603] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13341.603] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-7) (Using EDID frequencies
[ 13341.603] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 13341.607] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 13341.607] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 13341.607] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 13341.607] (--) NVIDIA(GPU-0):
[ 13341.612] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 13341.612] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 13341.612] (--) NVIDIA(GPU-0):
[ 13341.615] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 13341.615] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 13341.615] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 13341.615] (--) NVIDIA(GPU-0):
[ 13341.615] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 13341.615] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 13341.615] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 13341.615] (--) NVIDIA(GPU-0):
[ 13341.615] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 13341.615] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 13341.615] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 13341.615] (--) NVIDIA(GPU-0):
[ 13341.615] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 13341.615] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 13341.615] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 13341.615] (--) NVIDIA(GPU-0):
[ 13341.615] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 13341.615] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 13341.615] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 13341.615] (--) NVIDIA(GPU-0):
[ 13341.615] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 13341.615] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 13341.615] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[ 13341.615] (--) NVIDIA(GPU-0):
[ 13341.615] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 13341.615] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 13341.615] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 13341.615] (--) NVIDIA(GPU-0):
[ 13341.680] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 13341.680] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 13341.680] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 13341.680] (--) NVIDIA(GPU-0):
[ 13341.712] (II) NVIDIA(0): Setting mode "DP-5: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 13347.264] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 13347.264] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 13347.264] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 13347.264] (--) NVIDIA(GPU-0):
[ 13347.274] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 13347.274] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 13347.274] (--) NVIDIA(GPU-0):
[ 13347.277] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 13347.277] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 13347.277] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 13347.277] (--) NVIDIA(GPU-0):
[ 13347.277] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 13347.277] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 13347.277] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 13347.277] (--) NVIDIA(GPU-0):
[ 13347.277] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 13347.277] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 13347.277] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 13347.277] (--) NVIDIA(GPU-0):
[ 13347.277] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 13347.277] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 13347.277] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 13347.277] (--) NVIDIA(GPU-0):
[ 13347.277] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 13347.277] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 13347.277] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 13347.277] (--) NVIDIA(GPU-0):
[ 13347.278] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 13347.278] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 13347.278] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[ 13347.278] (--) NVIDIA(GPU-0):
[ 13347.278] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 13347.278] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 13347.278] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 13347.278] (--) NVIDIA(GPU-0):
[ 13347.284] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 13347.284] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 13347.284] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 13347.284] (--) NVIDIA(GPU-0):
[ 13348.114] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13348.114] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-7) (Using EDID frequencies
[ 13348.114] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 13348.117] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 13348.117] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 13348.117] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 13348.117] (--) NVIDIA(GPU-0):
[ 13348.122] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 13348.122] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 13348.122] (--) NVIDIA(GPU-0):
[ 13348.125] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 13348.125] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 13348.125] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 13348.125] (--) NVIDIA(GPU-0):
[ 13348.125] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 13348.125] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 13348.125] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 13348.125] (--) NVIDIA(GPU-0):
[ 13348.125] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 13348.125] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 13348.125] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 13348.125] (--) NVIDIA(GPU-0):
[ 13348.125] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 13348.125] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 13348.125] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 13348.125] (--) NVIDIA(GPU-0):
[ 13348.125] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 13348.125] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 13348.125] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 13348.125] (--) NVIDIA(GPU-0):
[ 13348.126] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 13348.126] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 13348.126] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[ 13348.126] (--) NVIDIA(GPU-0):
[ 13348.126] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 13348.126] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 13348.126] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 13348.126] (--) NVIDIA(GPU-0):
[ 13348.190] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 13348.190] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 13348.190] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 13348.190] (--) NVIDIA(GPU-0):
[ 13348.198] (II) NVIDIA(0): Setting mode "DP-5: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[ 15862.844] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 15862.844] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 15862.844] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 15862.844] (--) NVIDIA(GPU-0):
[ 15862.852] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 15862.852] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 15862.852] (--) NVIDIA(GPU-0):
[ 15862.855] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 15862.855] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 15862.855] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 15862.855] (--) NVIDIA(GPU-0):
[ 15862.855] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 15862.855] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 15862.855] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 15862.855] (--) NVIDIA(GPU-0):
[ 15862.855] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 15862.855] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 15862.855] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 15862.855] (--) NVIDIA(GPU-0):
[ 15862.855] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 15862.855] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 15862.855] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 15862.855] (--) NVIDIA(GPU-0):
[ 15862.855] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 15862.855] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 15862.855] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 15862.855] (--) NVIDIA(GPU-0):
[ 15862.855] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 15862.855] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 15862.855] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[ 15862.855] (--) NVIDIA(GPU-0):
[ 15862.855] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 15862.855] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 15862.855] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 15862.855] (--) NVIDIA(GPU-0):
[ 15862.861] (--) NVIDIA(GPU-0): DFP-7: disconnected
[ 15862.861] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[ 15862.861] (--) NVIDIA(GPU-0): DFP-7: 165.0 MHz maximum pixel clock
[ 15862.861] (--) NVIDIA(GPU-0):
[ 15864.866] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15864.866] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-7) (Using EDID frequencies
[ 15864.866] (**) NVIDIA(0):     has been enabled on all display devices.)
[ 15864.870] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 15864.870] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 15864.870] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 15864.870] (--) NVIDIA(GPU-0):
[ 15864.878] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 15864.878] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 15864.878] (--) NVIDIA(GPU-0):
[ 15864.880] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 15864.880] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 15864.880] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 15864.880] (--) NVIDIA(GPU-0):
[ 15864.880] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 15864.880] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 15864.880] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[ 15864.880] (--) NVIDIA(GPU-0):
[ 15864.881] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 15864.881] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 15864.881] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 15864.881] (--) NVIDIA(GPU-0):
[ 15864.881] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 15864.881] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 15864.881] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[ 15864.881] (--) NVIDIA(GPU-0):
[ 15864.881] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 15864.881] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 15864.881] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 15864.881] (--) NVIDIA(GPU-0):
[ 15864.881] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 15864.881] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 15864.881] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[ 15864.881] (--) NVIDIA(GPU-0):
[ 15864.881] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 15864.881] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 15864.881] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[ 15864.881] (--) NVIDIA(GPU-0):
[ 15864.946] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[ 15864.946] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[ 15864.946] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
[ 15864.946] (--) NVIDIA(GPU-0):
[ 15864.954] (II) NVIDIA(0): Setting mode "DP-5: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"

Dernière modification par Guppy88 (10-12-2016 22:01:21)

Hors ligne

#20 08-12-2016 17:54:21

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

c' est quoi comme écran un 27 pouces ?


[ 15864.954] (II) NVIDIA(0): Setting mode "DP-5: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
 


l écran utilise la sortie 7 de ta carte


[  3393.316] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): connected
[  3393.316] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): Internal TMDS
[  3393.316] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-7): 165.0 MHz maximum pixel clock
 


le driver fonctionne  definition => [     4.365] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080


[     4.355] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 980 (GM204-A) at PCI:1:0:0 (GPU-0)
[     4.355] (--) NVIDIA(0): Memory: 4194304 kBytes
[     4.355] (--) NVIDIA(0): VideoBIOS: 84.04.31.00.dd
[     4.355] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     4.355] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     4.355] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-7) (Using EDID frequencies
[     4.355] (**) NVIDIA(0):     has been enabled on all display devices.)
[     4.363] (==) NVIDIA(0):
[     4.363] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     4.363] (==) NVIDIA(0):     will be used as the requested mode.
[     4.363] (==) NVIDIA(0):
[     4.365] (II) NVIDIA(0): Validated MetaModes:
[     4.365] (II) NVIDIA(0):     "DFP-7:nvidia-auto-select"
[     4.365] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     4.387] (--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X config
[     4.387] (--) NVIDIA(0):     option
 




[     3.559] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[     3.559] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     3.559] (==) NVIDIA(0): RGB weight 888
[     3.559] (==) NVIDIA(0): Default visual is TrueColor
[     3.559] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.561] (**) NVIDIA(0): Enabling 2D acceleration
[     4.281] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
 



un message de l acpi de la carte ,  DRI2 est ok


[     4.388] (--) Depth 24 pixmap format is 32 bpp
[     4.390] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     4.390] (II) NVIDIA:     access.
[     4.397] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     4.397] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     4.397] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     4.397] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     4.397] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     4.397] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     4.397] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     4.397] (II) NVIDIA(0):     Config Options in the README.
[     4.430] (II) NVIDIA(0): Setting mode "DFP-7:nvidia-auto-select"
[     4.489] (==) NVIDIA(0): Disabling shared memory pixmaps
[     4.489] (==) NVIDIA(0): Backing store enabled
[     4.489] (==) NVIDIA(0): Silken mouse enabled
[     4.491] (==) NVIDIA(0): DPMS enabled
[     4.492] (II) Loading sub module "dri2"
[     4.492] (II) LoadModule: "dri2"
[     4.492] (II) Module "dri2" already built-in
[     4.492] (II) NVIDIA(0): [DRI2] Setup complete
[     4.492] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     4.493] (--) RandR disabled
[     4.497] (II) SELinux: Disabled on system
[     4.498] (II) Initializing extension GLX
[     4.498] (II) Indirect GLX disabled.
 



j'ai trouvé que ces 2 modes (plus celui du debut du post )



[  3354.127] (II) NVIDIA(0): Setting mode "DP-5: 640x480_60 @640x480 +0+0 {ViewPortIn=640x480, ViewPortOut=640x480+0+0}"

[  3329.214] (II) NVIDIA(0): Setting mode "DP-5: 1152x864 @1152x864 +0+0 {ViewPortIn=1152x864, ViewPortOut=1152x864+0+0}"

 

Dernière modification par anonyme (08-12-2016 18:17:58)

#21 08-12-2016 18:31:17

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

je te met le retour de ma GTX980  avec un écran basic 27 pouces (premier prix )


[    47.765] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 980 (GM204-A) at PCI:1:0:0 (GPU-0)
[    47.765] (--) NVIDIA(0): Memory: 4194304 kBytes
[    47.765] (--) NVIDIA(0): VideoBIOS: 84.04.2f.00.f6
[    47.765] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    47.765] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    47.765] (**) NVIDIA(0):     device Philips PHL 273V5 (CRT-0) (Using EDID frequencies
[    47.765] (**) NVIDIA(0):     has been enabled on all display devices.)


[    47.965] (II) NVIDIA(0): Validated MetaModes:
[    47.965] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    47.965] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    47.969] (--) NVIDIA(0): DPI set to (81, 80); computed from "UseEdidDpi" X config


[    47.969] (--) Depth 24 pixmap format is 32 bpp
[    47.970] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[    47.970] (II) NVIDIA:     access.
[    47.974] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    47.974] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    47.974] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    47.974] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    47.974] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    47.974] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    47.974] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    47.974] (II) NVIDIA(0):     Config Options in the README.
[    48.101] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    48.190] (==) NVIDIA(0): Disabling shared memory pixmaps
[    48.190] (==) NVIDIA(0): Backing store enabled
[    48.190] (==) NVIDIA(0): Silken mouse enabled
[    48.244] (==) NVIDIA(0): DPMS enabled
[    48.278] (II) Loading sub module "dri2"
[    48.278] (II) LoadModule: "dri2"
[    48.278] (II) Module "dri2" already built-in
[    48.278] (II) NVIDIA(0): [DRI2] Setup complete
[    48.278] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    48.320] (--) RandR disabled
[    48.363] (II) SELinux: Disabled on system
[    48.406] (II) Initializing extension GLX
[    48.406] (II) Indirect GLX disabled.

[   201.647] (--) NVIDIA(GPU-0): Philips PHL 273V5 (CRT-0): connected
[   201.647] (--) NVIDIA(GPU-0): Philips PHL 273V5 (CRT-0): 400.0 MHz maximum pixel clock
 


tu vois qu il est trés similaire a part que j ai l écran en VGA sortie "0"

pour l instant j'ai pas d explication  hmm

ps: je suis en 1920 x 1080  60Hz

nota : pour Amd il y a la technologie FreeSync  (G-Sync pour Nvidia)  mon écran non compatible tongue

Mate me propose 8 résolutions  (commence a 640 )
je suis en résolution native de l écran , l affichage est correct pour moi (mais bon sans lunette grosse tache lumineuse   roll  )
je peut me mettre en DVI , ça va pas changer grand chose ( VGA parceque j utilise un KVM VGA vers VGA )
le driver a changé dans sa dernière version , je m en suis pas aperçu avant ta remarque.
j ai la meme erreur que toi pour l ACPI avec la carte

nvidia-settings fonctionne trés bien pour moi , avec un affichage normal pour un 27 puces ,
idem pour les ressouces "Moniteur system Mate"

cuda fonctionne trés bien


18:53:52:******************************* System ********************************
18:53:52:        CPU: AMD FX(tm)-8320 Eight-Core Processor
18:53:52:     CPU ID: AuthenticAMD Family 21 Model 2 Stepping 0
18:53:52:       CPUs: 8
18:53:52:     Memory: 7.76GiB
18:53:52:Free Memory: 7.50GiB
18:53:52:    Threads: POSIX_THREADS
18:53:52: OS Version: 4.8
18:53:52:Has Battery: false
18:53:52: On Battery: false
18:53:52: UTC Offset: 1
18:53:52:        PID: 931
18:53:52:
18:53:52:         OS: Linux 4.8.0-1-amd64 x86_64
18:53:52:    OS Arch: AMD64
18:53:52:       GPUs: 1
18:53:52:      GPU 0: NVIDIA:5 GM204 [GeForce GTX 980]
18:53:52:       CUDA: 5.2
18:53:52:CUDA Driver: 8000
18:53:52:***********************************************************************
 



tu a essayé de démarrer le PC sans la tablette connectée ?


[     5.692] (II) XINPUT: Adding extended input device "Wacom Bamboo 16FG 6x8 Finger touch" (type: TOUCH, id 14)
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) keeping acceleration scheme 1
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration profile 0
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration factor: 2.000
[     5.692] (**) Wacom Bamboo 16FG 6x8 Finger touch: (accel) acceleration threshold: 4
 


faut tout testé roll hmm

Dernière modification par anonyme (08-12-2016 19:14:34)

#22 08-12-2016 19:20:20

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

Mon écran doit être un 24 pouces (il fait 61 cm), Jessie avec le driver nvidia proprio installé grâce à tes indications en .run  le pilote sans problème et le mode GPU est actif.

Et mon ancienne version de stretch avec le driver nvidia installé à partir des paquets  du dépôt le pilotait parfaitement .

Donc c'est seulement une question de configuration, je vais essayer de démarrer sans la tablette.
Guppy

Avec ou sans tablette, ça ne change rien, voilà ce que me donne la boite de dialogue pour modifier la préférence de l'affichage
captur11.png
J'ai des définitions possibles décroissantes jusqu'à 640X480 , au moins une douzaine, celles que tu as vu sont surement les deux que j'avais essayé pour voir si cela changeait quelque chose

Dernière modification par Guppy88 (08-12-2016 19:33:52)

Hors ligne

#23 08-12-2016 19:44:41

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

j ai regardé ma GTX970 meme log , et puis nouveau n 'est  pas désactivé dans le noyau , il charge le module nouveau .
bon sur un 24 pouces le fonctionnement est correct aussi

je comprend pas ce qui se passe sur ta machine sad

nota : le 24 pouces est 1920 x 1080 , tu voit que mon 27 est un bas de gamme tongue

j'ai regardé aussi sur ma GTX1070 avec stretch et gnome +gdm3
je n ai pas cet avertissement :


ACPI: failed to connect to the ACPI event daemon;
 


l écran est un Asus 27 , pas de souci pour la définition

ps: sur le log que tu a posté en #19 tu devrais mettre un "code" pour avoir "l ascenseur" a droite ça prend toute la page wink

Dernière modification par anonyme (09-12-2016 05:36:05)

#24 09-12-2016 14:25:23

Guppy88
Membre
Lieu : Rambervillers Vosges
Distrib. : Bullseye (EFI)+Bullseye (bios) + Buster (bios)
Noyau : Linux 5.10.0-9-amd64 - Linux 4.19.0-6-amd64
(G)UI : Gnome 3.38.5 - 3.38.05
Inscription : 07-01-2012

Re : [Résolu]Pb Installation de stretch alpha 8

ps: sur le log que tu a posté en #19 tu devrais mettre un "code" pour avoir "l ascenseur" a droite ça prend toute la page wink


Ben oui, je ne demande pas mieux, si tu lis bien mes posts, j'expliquais que je ne sais pas comment on fait et je demandais comment.

Enfin je ne sais pas comment afficher ici le contenu de nano, ....
Je sais qu'il existe un moyen de l'afficher dans une petite fenêtre pour lire le contenu en le faisant défiler, sans occuper des pages dans le forum mais je ne sais pas comment on fait.

Je vois bien le bouton code , avec la possibilité d'en  choisir un parmi toute une liste, mais lequel ?
Autre option pour installer nividia sur ma stretch.
Dis moi comment tout effacer, ensuite je téléchargerais le driver du site nvidia et j’essaierai de l'installer en .run, comme tu m'as indiqué pour Jessie (ça à fonctionné et ça fonctionne toujours bien avec la gestion des deux écrans en plus)
Guppy

Dernière modification par Guppy88 (09-12-2016 14:27:21)

Hors ligne

#25 09-12-2016 15:01:20

anonyme
Invité

Re : [Résolu]Pb Installation de stretch alpha 8

pour le code , entre les barres " [ ] " ; tu met "code" pour ouvrir et "/code" pour fermer .
il y a un wiki pour l utilisation des codes , j utilise trés peu le bouton "code" , je les tapes manuellement en début et fin du texte .
pour les commandes , pour user c est "code=user" et root "code=root" toujours a l interieur des " [ ] "  et finir par " /code "

pour supprimer le driver


apt-get remove --purge nvidia*
 



puis


apt-get autoremove --purge
 


redémarrer la machine

ton post sur la GTX970 => https://debian-facile.org/viewtopic.php?id=12119  wink

pour le driver proprio bien installer (ou vérifier ) les paquets indispensables , puis lancer le .run (sur l ancien post tu va retrouver les infos et les commandes  )

pour faire court , tu donne quelques droit a ton fichier nvidia.run


chmod -R 777 nomdupaquetnvidia.run
 


ajouter l architecture i386


dpkg --add-architecture i386
 


un update


apt-get update
 


puis tu lance l installation


./NVIDIA-Linux-86_64-352-41.run --compat32-libdir lib
 


pour le désinstaller


./NVIDIA-Linux-86_64-352-41.run --uninstall
 



la doc nvidia , voir le minimum nécessaire pour l installation du driver  =>  http://fr.download.nvidia.com/XFree86/L … index.html

Dernière modification par anonyme (09-12-2016 15:30:38)

Pied de page des forums