logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#101 21-11-2016 17:58:04

anonyme
Invité

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

je vois pas la carte nvidia , sinon le reste est bon
il me semble quand meme qu il faudrait qu elle soit initialisé au démarrage roll

le probleme c'est que je connais pas le fonctionnement exact du portable , ne met pas "[resolu]" sur ce post , utilise la machine et tu fera les remarques si un probleme.

c'est le seul souci que je remarque , absence du driver nouveau dans le log

le retour de  "journalctl -r -p err"  rien de grave
en cas de bug ne redémarre pas et utilise cette commande pour les messages d'erreur  wink

ps: si tu a le temps regarde si tout ce qu on installé est present avec synaptic ( pour bumblebee ) et si le paquet "xserver-xorg-video-nouveau est bien installé
tu dois avoir un dossier /etc/default/bumblebee avec un fichier de conf que je connais pas , peut etre poster le contenu

ps: oui pour ton post au dessus supprime complettement les résidus

le wiki bumblebee  => https://debian-facile.org/doc:materiel: … ia:optimus
a la fin tu a les erreurs possibles
il y a au moins deux fichiers de conf dans le dossier "bumblebee"


nano /etc/bumblebee/xorg.conf.nvidia
 



nano /etc/bumblebee/bumblebee.conf
 

Dernière modification par anonyme (21-11-2016 18:08:35)

#102 21-11-2016 18:26:42

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

c'est le seul souci que je remarque , absence du driver nouveau dans le log


Je reposte le Var/log/Xorg.0.log au cas où car quelques lignes on changés, mais pas de trace de Nvidia ou de driver Nouveau dans le fichier:

[    25.888]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    25.888] X Protocol Version 11, Revision 0
[    25.888] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    25.888] Current Operating System: Linux Debian 4.8.0-1-amd64 #1 SMP Debian 4.8.5-1 (2016-10-28) x86_64
[    25.888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=c9c5a086-1363-43da-8139-639f1a604522 ro quiet
[    25.888] Build Date: 06 September 2016  01:32:44PM
[    25.888] xorg-server 2:1.18.4-2 (https://www.debian.org/support)
[    25.888] Current version of pixman: 0.34.0
[    25.888]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    25.888] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.889] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 21 17:58:42 2016
[    25.917] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.009] (==) No Layout section.  Using the first Screen section.
[    26.009] (==) No screen section available. Using defaults.
[    26.009] (**) |-->Screen "Default Screen Section" (0)
[    26.009] (**) |   |-->Monitor "<default monitor>"
[    26.036] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    26.036] (==) Automatically adding devices
[    26.036] (==) Automatically enabling devices
[    26.036] (==) Automatically adding GPU devices
[    26.036] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    26.166] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    26.166]  Entry deleted from font path.
[    26.242] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    26.242] (==) ModulePath set to "/usr/lib/xorg/modules"
[    26.242] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.279] (II) Loader magic: 0x56168e646dc0
[    26.279] (II) Module ABI versions:
[    26.279]  X.Org ANSI C Emulation: 0.4
[    26.279]  X.Org Video Driver: 20.0
[    26.279]  X.Org XInput driver : 22.1
[    26.279]  X.Org Server Extension : 9.0
[    26.280] (++) using VT number 7

[    26.280] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    26.282] (II) xfree86: Adding drm device (/dev/dri/card0)
[    26.294] (--) PCI:*(0:0:2:0) 8086:0116:1028:04b6 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[    26.294] (--) PCI: (0:1:0:0) 10de:0df5:1028:04b6 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    26.294] (II) LoadModule: "glx"
[    26.331] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    26.554] (II) Module glx: vendor="X.Org Foundation"
[    26.554]  compiled for 1.18.4, module version = 1.0.0
[    26.554]  ABI class: X.Org Server Extension, version 9.0
[    26.554] (==) AIGLX enabled
[    26.555] (==) Matched modesetting as autoconfigured driver 0
[    26.555] (==) Matched fbdev as autoconfigured driver 1
[    26.555] (==) Matched vesa as autoconfigured driver 2
[    26.555] (==) Assigned the driver to the xf86ConfigLayout
[    26.555] (II) LoadModule: "modesetting"
[    26.580] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    26.615] (II) Module modesetting: vendor="X.Org Foundation"
[    26.615]  compiled for 1.18.4, module version = 1.18.4
[    26.615]  Module class: X.Org Video Driver
[    26.615]  ABI class: X.Org Video Driver, version 20.0
[    26.615] (II) LoadModule: "fbdev"
[    26.615] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    26.634] (II) Module fbdev: vendor="X.Org Foundation"
[    26.634]  compiled for 1.18.0, module version = 0.4.4
[    26.634]  Module class: X.Org Video Driver
[    26.634]  ABI class: X.Org Video Driver, version 20.0
[    26.634] (II) LoadModule: "vesa"
[    26.634] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    26.642] (II) Module vesa: vendor="X.Org Foundation"
[    26.642]  compiled for 1.18.0, module version = 2.3.4
[    26.642]  Module class: X.Org Video Driver
[    26.642]  ABI class: X.Org Video Driver, version 20.0
[    26.642] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    26.642] (II) FBDEV: driver for framebuffer: fbdev
[    26.642] (II) VESA: driver for VESA chipsets: vesa
[    26.676] (II) modeset(0): using drv /dev/dri/card0
[    26.676] (WW) Falling back to old probe method for fbdev
[    26.676] (II) Loading sub module "fbdevhw"
[    26.676] (II) LoadModule: "fbdevhw"
[    26.676] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    26.713] (II) Module fbdevhw: vendor="X.Org Foundation"
[    26.713]  compiled for 1.18.4, module version = 0.0.2
[    26.713]  ABI class: X.Org Video Driver, version 20.0
[    26.714] (WW) Falling back to old probe method for vesa
[    26.714] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    26.714] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    26.714] (==) modeset(0): RGB weight 888
[    26.714] (==) modeset(0): Default visual is TrueColor
[    26.714] (II) Loading sub module "glamoregl"
[    26.714] (II) LoadModule: "glamoregl"
[    26.714] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    26.844] (II) Module glamoregl: vendor="X.Org Foundation"
[    26.844]  compiled for 1.18.4, module version = 1.0.0
[    26.844]  ABI class: X.Org ANSI C Emulation, version 0.4
[    26.844] (II) glamor: OpenGL accelerated X.org driver based.
[    27.264] (II) glamor: EGL version 1.4 (DRI2):
[    27.422] (II) modeset(0): glamor initialized
[    27.422] (II) modeset(0): Output LVDS-1 has no monitor section
[    27.596] (II) modeset(0): Output VGA-1 has no monitor section
[    27.612] (II) modeset(0): Output HDMI-1 has no monitor section
[    27.690] (II) modeset(0): Output DP-1 has no monitor section
[    27.690] (II) modeset(0): EDID for output LVDS-1
[    27.690] (II) modeset(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[    27.690] (II) modeset(0): Year: 2010  Week: 0
[    27.690] (II) modeset(0): EDID Version: 1.3
[    27.690] (II) modeset(0): Digital Display Input
[    27.690] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    27.690] (II) modeset(0): Gamma: 2.20
[    27.690] (II) modeset(0): No DPMS capabilities specified
[    27.690] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    27.690] (II) modeset(0): First detailed timing is preferred mode
[    27.690] (II) modeset(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    27.690] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    27.690] (II) modeset(0): Manufacturer's mask: 0
[    27.690] (II) modeset(0): Supported detailed timing:
[    27.690] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    27.690] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    27.690] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    27.690] (II) modeset(0): Supported detailed timing:
[    27.690] (II) modeset(0): clock: 71.6 MHz   Image Size:  344 x 194 mm
[    27.690] (II) modeset(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1510 h_border: 0
[    27.690] (II) modeset(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 789 v_border: 0
[    27.690] (II) modeset(0):  8MN61€156AT
[    27.690] (II) modeset(0): Unknown vendor-specific block 0
[    27.690] (II) modeset(0): EDID (in hex):
[    27.690] (II) modeset(0):   00ffffffffffff004ca3415400000000
[    27.690] (II) modeset(0):   00140103902213780ac8959e57549226
[    27.690] (II) modeset(0):   0f505400000001010101010101010101
[    27.690] (II) modeset(0):   010101010101f41b5690500015303020
[    27.690] (II) modeset(0):   250058c21000001af41b569050001530
[    27.690] (II) modeset(0):   3020250058c21000001a000000fe0038
[    27.690] (II) modeset(0):   4d4e36318031353641540a2000000000
[    27.690] (II) modeset(0):   00000000000000000001010a2020001d
[    27.690] (II) modeset(0): Printing probed modes for output LVDS-1
[    27.690] (II) modeset(0): Modeline "1366x768"x60.1   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    27.690] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    27.690] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    27.690] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    27.690] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    27.690] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    27.690] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    27.690] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    27.691] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    27.691] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    27.691] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    27.691] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    27.691] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    27.691] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    27.691] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    27.691] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    27.691] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    27.691] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    27.691] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    27.691] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    27.691] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    27.691] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    27.691] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    27.691] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    27.691] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    27.691] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    27.691] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    27.691] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    27.864] (II) modeset(0): EDID for output VGA-1
[    27.880] (II) modeset(0): EDID for output HDMI-1
[    27.880] (II) modeset(0): Manufacturer: IVM  Model: 6113  Serial#: 2214
[    27.880] (II) modeset(0): Year: 2014  Week: 41
[    27.880] (II) modeset(0): EDID Version: 1.3
[    27.880] (II) modeset(0): Digital Display Input
[    27.880] (II) modeset(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    27.880] (II) modeset(0): Gamma: 2.20
[    27.880] (II) modeset(0): DPMS capabilities: Off
[    27.880] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    27.880] (II) modeset(0): First detailed timing is preferred mode
[    27.880] (II) modeset(0): redX: 0.645 redY: 0.332   greenX: 0.315 greenY: 0.619
[    27.880] (II) modeset(0): blueX: 0.151 blueY: 0.065   whiteX: 0.313 whiteY: 0.329
[    27.880] (II) modeset(0): Supported established timings:
[    27.880] (II) modeset(0): 640x480@60Hz
[    27.880] (II) modeset(0): 640x480@67Hz
[    27.880] (II) modeset(0): 800x600@56Hz
[    27.880] (II) modeset(0): 800x600@60Hz
[    27.880] (II) modeset(0): 1024x768@60Hz
[    27.880] (II) modeset(0): Manufacturer's mask: 0
[    27.880] (II) modeset(0): Supported standard timings:
[    27.880] (II) modeset(0): #0: hsize: 1152  vsize 720  refresh: 60  vid: 113
[    27.880] (II) modeset(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    27.880] (II) modeset(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    27.880] (II) modeset(0): #3: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    27.880] (II) modeset(0): #4: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    27.880] (II) modeset(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    27.881] (II) modeset(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    27.881] (II) modeset(0): Supported detailed timing:
[    27.881] (II) modeset(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    27.881] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    27.881] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    27.881] (II) modeset(0): Serial No: 1127844122214
[    27.881] (II) modeset(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    27.881] (II) modeset(0): Monitor name: PLE2483H
[    27.881] (II) modeset(0): EDID (in hex):
[    27.881] (II) modeset(0):   00ffffffffffff0026cd1361a6080000
[    27.881] (II) modeset(0):   2918010380351e782a0ef5a555509e26
[    27.881] (II) modeset(0):   105054330800710081408180a940b300
[    27.881] (II) modeset(0):   9500d1c00101023a801871382d40582c
[    27.881] (II) modeset(0):   4500132b2100001e000000ff00313132
[    27.881] (II) modeset(0):   37383434313232323134000000fd0037
[    27.881] (II) modeset(0):   4c1e5311000a202020202020000000fc
[    27.881] (II) modeset(0):   00504c4532343833480a20202020002e
[    27.881] (II) modeset(0): Printing probed modes for output HDMI-1
[    27.881] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    27.881] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    27.881] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    27.881] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    27.881] (II) modeset(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    27.881] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    27.881] (II) modeset(0): Modeline "1152x720"x60.0   67.28  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.7 kHz)
[    27.881] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.881] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.881] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    27.881] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    27.881] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.960] (II) modeset(0): EDID for output DP-1
[    27.960] (II) modeset(0): Output LVDS-1 connected
[    27.960] (II) modeset(0): Output VGA-1 disconnected
[    27.960] (II) modeset(0): Output HDMI-1 connected
[    27.960] (II) modeset(0): Output DP-1 disconnected
[    27.960] (II) modeset(0): Using spanning desktop for initial modes
[    27.960] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    27.960] (II) modeset(0): Output HDMI-1 using initial mode 1920x1080 +1366+0
[    27.960] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    27.960] (==) modeset(0): DPI set to (96, 96)
[    27.960] (II) Loading sub module "fb"
[    27.960] (II) LoadModule: "fb"
[    27.960] (II) Loading /usr/lib/xorg/modules/libfb.so
[    28.062] (II) Module fb: vendor="X.Org Foundation"
[    28.062]  compiled for 1.18.4, module version = 1.0.0
[    28.062]  ABI class: X.Org ANSI C Emulation, version 0.4
[    28.062] (II) UnloadModule: "fbdev"
[    28.062] (II) Unloading fbdev
[    28.062] (II) UnloadSubModule: "fbdevhw"
[    28.062] (II) Unloading fbdevhw
[    28.062] (II) UnloadModule: "vesa"
[    28.062] (II) Unloading vesa
[    28.062] (==) Depth 24 pixmap format is 32 bpp
[    28.269] (==) modeset(0): Backing store enabled
[    28.269] (==) modeset(0): Silken mouse enabled
[    28.271] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    28.347] (==) modeset(0): DPMS enabled
[    28.348] (II) modeset(0): [DRI2] Setup complete
[    28.348] (II) modeset(0): [DRI2]   DRI driver: i965
[    28.348] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    28.464] (--) RandR disabled
[    28.473] (II) SELinux: Disabled on system
[    28.504] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    28.504] (II) AIGLX: enabled GLX_ARB_create_context
[    28.504] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    28.504] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    28.504] (II) AIGLX: enabled GLX_INTEL_swap_event
[    28.504] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    28.504] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    28.504] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    28.504] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    28.504] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    28.504] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    28.504] (II) AIGLX: Loaded and initialized i965
[    28.504] (II) GLX: Initialized DRI2 GL provider for screen 0
[    28.606] (II) modeset(0): Damage tracking initialized
[    28.606] (II) modeset(0): Setting screen physical size to 869 x 285
[    29.698] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    29.698] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    29.698] (II) LoadModule: "libinput"
[    29.698] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    29.799] (II) Module libinput: vendor="X.Org Foundation"
[    29.799]  compiled for 1.18.4, module version = 0.20.0
[    29.799]  Module class: X.Org XInput Driver
[    29.799]  ABI class: X.Org XInput driver, version 22.1
[    29.799] (II) Using input driver 'libinput' for 'Power Button'
[    29.799] (**) Power Button: always reports core events
[    29.799] (**) Option "Device" "/dev/input/event5"
[    29.800] (**) Option "_source" "server/udev"
[    29.800] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    29.800] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    29.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    29.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    29.820] (**) Option "xkb_model" "pc105"
[    29.820] (**) Option "xkb_layout" "fr"
[    29.820] (**) Option "xkb_variant" "latin9"
[    29.935] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    29.935] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    29.936] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    29.936] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    29.936] (II) Using input driver 'libinput' for 'Video Bus'
[    29.936] (**) Video Bus: always reports core events
[    29.936] (**) Option "Device" "/dev/input/event8"
[    29.937] (**) Option "_source" "server/udev"
[    29.937] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    29.937] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    29.952] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event8"
[    29.952] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    29.952] (**) Option "xkb_model" "pc105"
[    29.952] (**) Option "xkb_layout" "fr"
[    29.952] (**) Option "xkb_variant" "latin9"
[    29.953] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[    29.953] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[    29.954] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    29.954] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    29.954] (II) Using input driver 'libinput' for 'Video Bus'
[    29.954] (**) Video Bus: always reports core events
[    29.954] (**) Option "Device" "/dev/input/event7"
[    29.954] (**) Option "_source" "server/udev"
[    29.955] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    29.955] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    29.968] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input12/event7"
[    29.968] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    29.968] (**) Option "xkb_model" "pc105"
[    29.968] (**) Option "xkb_layout" "fr"
[    29.968] (**) Option "xkb_variant" "latin9"
[    29.969] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[    29.969] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[    29.970] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    29.970] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    29.970] (II) Using input driver 'libinput' for 'Power Button'
[    29.970] (**) Power Button: always reports core events
[    29.970] (**) Option "Device" "/dev/input/event2"
[    29.970] (**) Option "_source" "server/udev"
[    29.970] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    29.970] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    29.984] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[    29.984] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    29.984] (**) Option "xkb_model" "pc105"
[    29.984] (**) Option "xkb_layout" "fr"
[    29.984] (**) Option "xkb_variant" "latin9"
[    29.985] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    29.985] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    29.986] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[    29.986] (II) No input driver specified, ignoring this device.
[    29.986] (II) This device may have been added with another device file.
[    29.987] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    29.987] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    29.987] (II) Using input driver 'libinput' for 'Sleep Button'
[    29.987] (**) Sleep Button: always reports core events
[    29.987] (**) Option "Device" "/dev/input/event3"
[    29.987] (**) Option "_source" "server/udev"
[    29.988] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    29.988] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    30.012] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    30.012] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    30.012] (**) Option "xkb_model" "pc105"
[    30.012] (**) Option "xkb_layout" "fr"
[    30.012] (**) Option "xkb_variant" "latin9"
[    30.013] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    30.013] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    30.014] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event14)
[    30.014] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "libinput keyboard catchall"
[    30.014] (II) Using input driver 'libinput' for 'Laptop_Integrated_Webcam_2HDM'
[    30.014] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    30.014] (**) Option "Device" "/dev/input/event14"
[    30.014] (**) Option "_source" "server/udev"
[    30.015] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    30.015] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    30.044] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input15/event14"
[    30.044] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    30.044] (**) Option "xkb_model" "pc105"
[    30.044] (**) Option "xkb_layout" "fr"
[    30.044] (**) Option "xkb_variant" "latin9"
[    30.045] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is tagged by udev as: Keyboard
[    30.045] (II) input device 'Laptop_Integrated_Webcam_2HDM', /dev/input/event14 is a keyboard
[    30.046] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    30.046] (II) No input driver specified, ignoring this device.
[    30.046] (II) This device may have been added with another device file.
[    30.047] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    30.047] (II) No input driver specified, ignoring this device.
[    30.047] (II) This device may have been added with another device file.
[    30.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[    30.047] (II) No input driver specified, ignoring this device.
[    30.047] (II) This device may have been added with another device file.
[    30.048] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    30.048] (II) No input driver specified, ignoring this device.
[    30.048] (II) This device may have been added with another device file.
[    30.048] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[    30.048] (II) No input driver specified, ignoring this device.
[    30.048] (II) This device may have been added with another device file.
[    30.049] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    30.049] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    30.049] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    30.049] (**) AT Translated Set 2 keyboard: always reports core events
[    30.049] (**) Option "Device" "/dev/input/event0"
[    30.049] (**) Option "_source" "server/udev"
[    30.050] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    30.050] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    30.104] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    30.104] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    30.104] (**) Option "xkb_model" "pc105"
[    30.104] (**) Option "xkb_layout" "fr"
[    30.104] (**) Option "xkb_variant" "latin9"
[    30.105] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    30.105] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    30.106] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    30.106] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    30.106] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    30.106] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    30.106] (**) Option "Device" "/dev/input/event1"
[    30.106] (**) Option "_source" "server/udev"
[    30.107] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    30.107] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    30.160] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    30.160] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    30.161] (**) Option "AccelerationScheme" "none"
[    30.161] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    30.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    30.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    30.162] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    30.162] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    30.162] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    30.163] (II) No input driver specified, ignoring this device.
[    30.163] (II) This device may have been added with another device file.
[    30.163] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    30.163] (II) No input driver specified, ignoring this device.
[    30.163] (II) This device may have been added with another device file.
[    47.661] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    47.661] (II) modeset(0): Printing DDC gathered Modelines:
[    47.661] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    47.932] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    47.932] (II) modeset(0): Printing DDC gathered Modelines:
[    47.932] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    48.320] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    48.320] (II) modeset(0): Printing DDC gathered Modelines:
[    48.320] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    48.591] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    48.591] (II) modeset(0): Printing DDC gathered Modelines:
[    48.591] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    50.665] (II) modeset(0): EDID vendor "SEC", prod id 21569
[    50.665] (II) modeset(0): Printing DDC gathered Modelines:
[    50.665] (II) modeset(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)


le retour de  "journalctl -r -p err"  rien de grave
en cas de bug ne redémarre pas et utilise cette commande pour les messages d'erreur


Ok, merci du conseil smile

ps: si tu a le temps regarde si tout ce qu on installé est present avec synaptic ( pour bumblebee ) et si le paquet "xserver-xorg-video-nouveau est bien installé


Bumblebee est installé, mate-optimus est installé, le paquets "xserver-xorg-video-nouveau" est bien installé, il existe aussi "xserver-xorg-video-nouveau-d" qui n'est pas installé, avec la description "pilote d'affichage nouveau, symboles de débogage".

tu dois avoir un dossier /etc/default/bumblebee avec un fichier de conf que je connais pas , peut etre poster le contenu

Il y a le dossier:  etc/bumblebee/ contenant les fichiers, bumblebee.conf, xorg.conf.nouveau, xorg.conf.nvidia et le dossier xorg.conf.d contenant lui même un fichier nommé 10-dummy.conf.
Voici le contenu de
bumblebee.conf

# Configuration file for Bumblebee.
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
 



xorg.conf.nouveau :

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nouveau"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting is needed on Ubuntu 13.04.
#   BusID "PCI:01:00:0"

EndSection



xorg.conf.nvidia :

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
#   BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

Dernière modification par Strato (21-11-2016 18:41:09)


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#103 21-11-2016 18:40:28

anonyme
Invité

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

teste et fait le retour , au dessus tu a quelques erreurs courantes dans le wiki bumblebee
sur le forum il doit y avoir pas mal d'utilisateurs avec des portables et 2 cartes vidéo (intel et nvidia)

je n'ai plus de choses a te demander de faire wink

celui la n'est pas utile => xserver-xorg-video-nouveau-d

pour la prise HDMI c'est spécifique au portable , mais je serai pas t' expliquer  pourquoi la sortie hdmi ne fonctionne pas , et le miniDP utilise le hdmi tongue

Dernière modification par anonyme (21-11-2016 18:46:40)

#104 21-11-2016 19:16:23

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

La commande

 optirun glxgears

me retourne cette erreur

[ 2686.560541] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[ 2686.560632] [ERROR]Aborting because fallback start is disabled.


et elle n'est pas répertorier dans le wiki. Cependant certaines semble en apparence s'y rapprocher... je vais explorer un peut tout ça...

En tout cas merci.gif pour ton aide

ps :

pour la prise HDMI c'est spécifique au portable , mais je serai pas t' expliquer  pourquoi la sortie hdmi ne fonctionne pas , et le miniDP utilise le hdmi tongue

Oui le mystère de la prise HDMI reste entier ! lol

Au sujet d'Nvidia Optimus je pense que je devrais ouvrir un nouveau sujet sur le forum (??), et revenir ici en fonction si un liens avec le problème HDMI est découvert.

Pour résumé, afin d'avoir un écran étendu dans notre situation :
- le second écran est reconnu avec une autre connexion que HDMI, ici miniDP vers DVI-D
- les deux écran sont géré par la carte Intel dans cette configuration et la technologie Nvidia Optimus n'est pas requise
- et cela est valable pour Debian-Jessie, où en optant pour miniDP vers DVI-D le second écran est reconnu et paramétrable en installant ARandR

Dernière modification par Strato (21-11-2016 19:24:01)


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#105 22-11-2016 09:38:16

anonyme
Invité

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

moi il me reste a acheter un portable avec gpu intel/nvidia et résoudre cette affaire   tongue  smile
=> []
roll

#106 27-11-2016 21:41:14

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

Et moi une tour pour ne plus avoir à le résoudre lol (mais ce n'est pas au programme)

Dernière modification par Strato (27-11-2016 21:45:57)


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#107 27-11-2016 21:52:57

anonyme
Invité

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

cool    lol

#108 13-12-2016 21:49:49

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : [En suspens? / Contourné] 2ème écran HDMI non reconnu/bug/GPU ?

Titre du post modifié

“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

Pied de page des forums