logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 13-12-2016 23:53:19

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Error boot status deamon / Failed Plymouth Boot Screen

Bonsoir,
J'ai téléchargé debian-live-8.6.0-amd64-mate-desktop+nonfree.iso, j'ai vérifié le MD5SUMS. Puis j'ai monté le fichier ISO sur clé USB.
Je teste le Live-USB et lors du chargement j'ai deux messages d'erreurs :

Loading, please wait...
[   4.192771] sd 0:0:0:0: [sda] No Catching mode page found
[   4.192843] sd 0:0:0:0: [sda] Assuming drive cache: write through
error : unexpectedly disconnected from boot status deamon
[  OK   ] A start job is running for live-config contains the components that configure a live system during the boot process (late userspace)..
 


[... (je saute des ligne) ...]

[  OK  ] Started tell plymouth to write out Runtime Data.
[FAILED] Failed to start Show Plymouth Boot Screen
see 'systemctl status plymouth-start.service' for details.
[  Ok  ] Started LSB : VirtualBox Linux X11 Additions.
 


Cependant, le live se charge correctement et il m'est possible de l'installer. Ces messages n’apparaissent pas avec HandyLinux ou DFLinux.

Dans la session live Debian-Mate-non-free :

journalctl -r -p err


-- Logs begin at Wed 2016-12-14 00:02:45 UTC, end at Wed 2016-12-14 00:03:49 UTC
Dec 14 00:03:08 debian pulseaudio[1725]: [pulseaudio] pid.c: Daemon already runn
Dec 14 00:03:08 debian pulseaudio[1723]: [pulseaudio] pid.c: Daemon already runn
Dec 14 00:02:55 debian bluetoothd[973]: sap-server: Operation not permitted (1)
Dec 14 00:02:55 debian bluetoothd[973]: Sap driver initialization failed.
Dec 14 00:02:55 debian systemd-udevd[1345]: Failed to apply ACL on /dev/dri/card
Dec 14 00:02:52 debian systemd[1]: Failed to start Show Plymouth Boot Screen.
Dec 14 00:02:46 debian pwconv[381]: failed to change the mode of /etc/passwd- to
Dec 14 00:02:45 localhost.localdomain kernel: sd 0:0:0:0: [sda] Assuming drive c
Dec 14 00:02:45 localhost.localdomain kernel: sd 0:0:0:0: [sda] No Caching mode
lines 1-10/10 (END)



J'aimerais donc savoir si possible de quoi il s'agit et s'il faut que je m'en inquiète. J'ai testé avec Mate, KDE, Mate Stretch, j'ai toujours ces deux messages d'erreur.  scratchhead.gif

--Liste des périphériques internes--

lspci



00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 525M] (rev ff)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
 



--Liste des périphériques connectés--

lsusb



Bus 004 Device 003: ID 8086:0189 Intel Corp.
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 059f:0651 LaCie, Ltd
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0408:2fb1 Quanta Computer, Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 



--Informations sur le matériel--

/usr/sbin/dmidecode -q -t bios -t system -t processor -t memory



BIOS Information
  Vendor: Dell Inc.        
  Version: A05
  Release Date: 05/04/2011
  Address: 0xE0000
  Runtime Size: 128 kB
  ROM Size: 2560 kB
  Characteristics:
    PCI is supported
    PNP is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    ESCD support is available
    Boot from CD is supported
    Selectable boot is supported
    BIOS ROM is socketed
    EDD is supported
    5.25"/360 kB floppy services are supported (int 13h)
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 kB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    CGA/mono video services are supported (int 10h)
    ACPI is supported
    USB legacy is supported
    LS-120 boot is supported
    Smart battery is supported
    BIOS boot specification is supported
    Function key-initiated network boot is supported
    Targeted content distribution is supported
  BIOS Revision: 0.1

System Information
  Manufacturer: Dell Inc.        
  Product Name: Dell System XPS L502X
  Version: Not Specified
  Serial Number: 260PRQ1
  UUID: 4C4C4544-0036-3010-8050-B2C04F525131
  Wake-up Type: Power Switch
  SKU Number: System SKUNumber
  Family: HuronRiver System

System Configuration Options

BIOS Language Information
  Language Description Format: Abbreviated
  Installable Languages: 4
    en-US
    fr-FR
    ja-JP
    ko-KR
  Currently Installed Language: en-US

System Boot Information
  Status: No errors detected

System Reset
  Status: Disabled
  Watchdog Timer: Present
  Boot Option: Do Not Reboot
  Boot Option On Limit: Do Not Reboot
  Reset Count: Unknown
  Reset Limit: Unknown
  Timer Interval: Unknown
  Timeout: Unknown

Processor Information
  Socket Designation: CPU
  Type: Central Processor
  Family: Core i7
  Manufacturer: Intel(R) Corporation
  ID: A7 06 02 00 FF FB EB BF
  Signature: Type 0, Family 6, Model 42, Stepping 7
  Flags:
    FPU (Floating-point unit on-chip)
    VME (Virtual mode extension)
    DE (Debugging extension)
    PSE (Page size extension)
    TSC (Time stamp counter)
    MSR (Model specific registers)
    PAE (Physical address extension)
    MCE (Machine check exception)
    CX8 (CMPXCHG8 instruction supported)
    APIC (On-chip APIC hardware supported)
    SEP (Fast system call)
    MTRR (Memory type range registers)
    PGE (Page global enable)
    MCA (Machine check architecture)
    CMOV (Conditional move instruction supported)
    PAT (Page attribute table)
    PSE-36 (36-bit page size extension)
    CLFSH (CLFLUSH instruction supported)
    DS (Debug store)
    ACPI (ACPI supported)
    MMX (MMX technology supported)
    FXSR (FXSAVE and FXSTOR instructions supported)
    SSE (Streaming SIMD extensions)
    SSE2 (Streaming SIMD extensions 2)
    SS (Self-snoop)
    HTT (Multi-threading)
    TM (Thermal monitor supported)
    PBE (Pending break enabled)
  Version: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz
  Voltage: 1.2 V
  External Clock: 100 MHz
  Max Speed: 2100 MHz
  Current Speed: 2100 MHz
  Status: Populated, Enabled
  Upgrade: Socket rPGA988B
  Serial Number: Not Supported by CPU
  Asset Tag: TBD By OEM
  Part Number: TBD By OEM
  Core Count: 2
  Core Enabled: 2
  Thread Count: 4
  Characteristics:
    64-bit capable

Physical Memory Array
  Location: System Board Or Motherboard
  Use: System Memory
  Error Correction Type: None
  Maximum Capacity: 8 GB
  Number Of Devices: 2

Memory Device
  Total Width: 64 bits
  Data Width: 64 bits
  Size: 2048 MB
  Form Factor: SODIMM
  Set: None
  Locator: ChannelA-DIMM0
  Bank Locator: BANK 0
  Type: DDR3
  Type Detail: Synchronous
  Speed: 1333 MHz
  Manufacturer: Hynix/Hyundai
  Serial Number: 152795E5
  Asset Tag: 9876543210
  Part Number: HMT325S6BFR8C-H9  
  Rank: Unknown

Memory Device
  Total Width: 64 bits
  Data Width: 64 bits
  Size: 2048 MB
  Form Factor: SODIMM
  Set: None
  Locator: ChannelB-DIMM0
  Bank Locator: BANK 2
  Type: DDR3
  Type Detail: Synchronous
  Speed: 1333 MHz
  Manufacturer: Hynix/Hyundai
  Serial Number: 1557961C
  Asset Tag: 9876543210
  Part Number: HMT325S6BFR8C-H9  
  Rank: Unknown

System Event Log
  Area Length: 18 bytes
  Header Start Offset: 0x0000
  Header Length: 16 bytes
  Data Start Offset: 0x0010
  Access Method: General-purpose non-volatile data functions
  Access Address: 0x00F0
  Status: Valid, Not Full
  Change Token: 0x00000000
  Header Format: Type 1
  Supported Log Type Descriptors: 3
  Descriptor 1: POST error
  Data Format 1: POST results bitmap
  Descriptor 2: Single-bit ECC memory error
  Data Format 2: Multiple-event
  Descriptor 3: Multi-bit ECC memory error
  Data Format 3: Multiple-event

 



--Configuration des écrans--

xrandr



Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.06*+
   1360x768      59.80    59.96  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm
   1920x1080     60.00*+
   1600x1200     60.00  
   1680x1050     59.88  
   1280x1024     60.02  
   1440x900      59.90  
   1280x960      60.00  
   1152x720      59.97  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       66.67    60.00  
DP1 disconnected (normal left inverted right x axis y axis)
 


--Liste des interfaces réseau--

cat /etc/network/interfaces



# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback
 



--Configuration du résolveur DNS--

cat /etc/resolv.conf



# Generated by NetworkManager
nameserver 192.168.1.1
 



--Configuration du réseau--

/sbin/ifconfig -a



eth0      Link encap:Ethernet  HWaddr 14:fe:b5:bd:5b:23  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:165 errors:0 dropped:0 overruns:0 frame:0
          TX packets:165 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:14699 (14.3 KiB)  TX bytes:14699 (14.3 KiB)

wlan0     Link encap:Ethernet  HWaddr ac:72:89:32:92:c7  
          inet adr:192.168.1.58  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::ae72:89ff:fe32:92c7/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4867 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2266 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:3859454 (3.6 MiB)  TX bytes:379445 (370.5 KiB)

 



--Table de routage IP--

/sbin/route -n



Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    1024   0        0 wlan0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 wlan0
 


--Utilisation du disque--

df -h



Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sdb5           49G     23G   24G  49% /
udev                10M       0   10M   0% /dev
tmpfs              776M    9,1M  767M   2% /run
tmpfs              1,9G     68K  1,9G   1% /dev/shm
tmpfs              5,0M    4,0K  5,0M   1% /run/lock
tmpfs              1,9G       0  1,9G   0% /sys/fs/cgroup
tmpfs              388M    4,0K  388M   1% /run/user/113
tmpfs              388M    8,0K  388M   1% /run/user/1000
 



--Partitionnement du disque--

/sbin/fdisk -l




Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0xaf8ba926

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048    206847    204800   100M  7 HPFS/NTFS/exFAT
/dev/sda2          206848 974925823 974718976 464,8G  7 HPFS/NTFS/exFAT
/dev/sda3       974925824 975847423    921600   450M 27 Hidden NTFS WinRE
/dev/sda4       975849472 976771071    921600   450M  7 HPFS/NTFS/exFAT

Disque /dev/sdb : 298,1 GiB, 320072933376 octets, 625142448 secteurs
Unités : secteur de 1 × 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
taille d'E/S (minimale / optimale) : 512 octets / 512 octets
Type d'étiquette de disque : dos
Identifiant de disque : 0x79ce1001

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sdb1  *      1245184 625137663 623892480 297,5G  5 Extended
/dev/sdb5         1247232 104812543 103565312  49,4G 83 Linux
/dev/sdb6       608487424 625137663  16650240     8G 82 Linux swap / Solaris
/dev/sdb7       104814592 206557183 101742592  48,5G 83 Linux
/dev/sdb8       206559232 310257663 103698432  49,5G 83 Linux
/dev/sdb9       310259712 414044159 103784448  49,5G 83 Linux
/dev/sdb10      414046208 517101567 103055360  49,1G 83 Linux
/dev/sdb11      517103616 608485375  91381760  43,6G 83 Linux

Les entrées de la table de partitions ne sont pas dans l'ordre du disque.
 



--Tableau du système de fichiers--

cat /etc/fstab



# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdc5 during installation
UUID=7829b89d-e4f9-4256-8eab-4f8275047144 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdc6 during installation
UUID=37bb6642-c03c-4f4c-97e2-105f49a6d9bb none            swap    sw              0       0
/dev/sr0        /media/cdrom0   udf,iso9660 user,noauto     0       0
 



Ps : je vais essayer avec Xfce
Puis si il y a des informations inutile dans ce que j'ai mis plus haut je les effacerait pour alléger.

Dernière modification par Strato (14-12-2016 00:10:38)


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#2 14-12-2016 08:56:10

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Bonjour,

merci de ce message avec beaucoup d'information peut-tu rajouter le retour de la commande

systemctl status plymouth-start



@+


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#3 14-12-2016 11:32:08

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Bonjour,
Y'a pas de quoi smile

systemctl status plymouth-start


● plymouth-start.service - Show Plymouth Boot Screen
   Loaded: loaded (/lib/systemd/system/plymouth-start.service; static)
   Active: failed (Result: signal) since Wed 2016-12-14 11:21:41 UTC; 1min 30s ago
  Process: 857 ExecStartPost=/bin/plymouth show-splash (code=exited, status=0/SUCCESS)
  Process: 852 ExecStart=/sbin/plymouthd --mode=boot --pid-file=/run/plymouth/pid --attach-to-session (code=exited, status=0/SUCCESS)
 Main PID: 856 (code=killed, signal=SEGV)

Dec 14 11:21:39 debian systemd[1]: Starting Show Plymouth Boot Screen...
Dec 14 11:21:39 debian systemd[1]: Started Show Plymouth Boot Screen.
Dec 14 11:21:41 debian systemd[1]: plymouth-start.service: main process exi...GV
Dec 14 11:21:41 debian systemd[1]: Unit plymouth-start.service entered fail...e.
Hint: Some lines were ellipsized, use -l to show in full.

Ceci c'est en session Live je ne l'ai pas encore installé.
J'ai essayé avec Live-Xfce c'est la même chose, du coup ça ne semble pas lié à l'environnement de bureau choisi. Par contre avec Debian-Standard je n'ai pas le message d'erreur au démarrage du Live il me semble et Je ne sais pas comment l'utiliser une fois chargé ...

Un autre détail commun à tout les Live avec environnement de bureaux : une fois chargé j'ai trois fenêtre de notifications qui s'ouvrent successivement :
- VBoxClient: the VirtualBox kernel service is not running Exiting <= c'est pour ce message que je me pose la question
- Discoonected The network connection has been disconnected.
- Wi-fi Networks Available Use the network menu to connect to a Wi-Fi network
Voilà au cas où il y aurait un liens avec le sujet du post ...

Dernière modification par Strato (14-12-2016 12:53:31)


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#4 15-12-2016 10:53:13

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Re,

Un autre détail commun à tout les Live avec environnement de bureaux : une fois chargé j'ai trois fenêtre de notifications qui s'ouvrent successivement :
- VBoxClient: the VirtualBox kernel service is not running Exiting <= c'est pour ce message que je me pose la question
- Discoonected The network connection has been disconnected.
- Wi-fi Networks Available Use the network menu to connect to a Wi-Fi network
Voilà au cas où il y aurait un liens avec le sujet du post ...



non rien a voir.

ajoute le contenu de

cat /var/log/boot.log



stp

@+


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#5 15-12-2016 12:23:00

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Re salut,
Je n'ai pas le fichier boot.log :

cat /var/log/boot.log


cat: /var/log/boot.log: No such file or directory


J'ai installé Debiab-jessie-mate à partir du Live-usb et même résultat : pas de boot.log


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#6 15-12-2016 12:26:01

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : Error boot status deamon / Failed Plymouth Boot Screen

Dec 14 11:21:39 debian systemd[1]: Starting Show Plymouth Boot Screen...
Dec 14 11:21:39 debian systemd[1]: Started Show Plymouth Boot Screen.
Dec 14 11:21:41 debian systemd[1]: plymouth-start.service: main process exi...GV
Dec 14 11:21:41 debian systemd[1]: Unit plymouth-start.service entered fail...e.
Hint: Some lines were ellipsized, use -l to show in full.


virtue_signaling.pngpalestine.png

En ligne

#7 15-12-2016 14:18:11

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Comme ceci ? :

sudo systemctl status plymouth-start -l


● plymouth-start.service - Show Plymouth Boot Screen
   Loaded: loaded (/lib/systemd/system/plymouth-start.service; static)
   Active: failed (Result: signal) since Thu 2016-12-15 14:06:35 UTC; 5min ago
  Process: 895 ExecStartPost=/bin/plymouth show-splash (code=exited, status=0/SUCCESS)
  Process: 892 ExecStart=/sbin/plymouthd --mode=boot --pid-file=/run/plymouth/pid --attach-to-session (code=exited, status=0/SUCCESS)
 Main PID: 893 (code=killed, signal=SEGV)

Dec 15 14:06:34 debian systemd[1]: Started Show Plymouth Boot Screen.
Dec 15 14:06:35 debian systemd[1]: plymouth-start.service: main process exited, code=killed, status=11/SEGV
Dec 15 14:06:35 debian systemd[1]: Unit plymouth-start.service entered failed state.


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#8 15-12-2016 14:21:48

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

je viens juste de percuter tu essaye de lancer ton ISO depuis virtualbox c'est bien ça ?

si c'est le cas c'est normal que le framebuffer ne soit pas pris en compte vu que tu est sur une live et que l’émulation complete de celui-ci nécessite l'installation des vbox-guest-additions

Dernière modification par greenmerlin (15-12-2016 14:27:44)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#9 15-12-2016 14:43:37

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : Error boot status deamon / Failed Plymouth Boot Screen

Haaaa. Forcément une virtualbox. The detail qui expliquerait tout yikes

virtue_signaling.pngpalestine.png

En ligne

#10 15-12-2016 14:48:26

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

greenmerlin a écrit :

je viens juste de percuter tu essaye de lancer ton ISO depuis virtualbox c'est bien ça ?

Je ne sais pas ... =>
J'ai téléchargé l'ISO, puis je l'ai monté sur une Clé USB.
Je redémarre l'ordinateur et Boot sur la clé USB, je choisi "Live (amd64)" pour tester avant d'installer.
Puis c'est là lors du chargement que j'ai les messages pré-cité.


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#11 15-12-2016 15:13:35

greenmerlin
Membre
Lieu : 127.0.0.1
Distrib. : Archlinux/TinycoreLinux(CorePure 64-6.4.1)/Jessie
Noyau : 4.2.2-1 / 4.4
(G)UI : wmaker
Inscription : 23-01-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Strato a écrit :

J'ai téléchargé l'ISO, puis je l'ai monté sur une Clé USB.



je suppose que tu veux dire installer ou copier....

donc non tu n'utilise pas virtualbox

essaye de lancer le live avec les options de noyau suivantes

quiet splash nomodeset video=uvesafb:1024x768-24

Dernière modification par greenmerlin (15-12-2016 15:14:26)


" La plus importante et la plus négligée de toutes les conversations, c'est l'entretien avec soi-même. "
Chancelier Oxenstiern.

536920766f7573206172726976657220c3a0206c69726520c3a7612c20632765737420717565206e6f757320706172746167656f6e73206c6573206dc3aa6d65732063656e747265732064e28099696e74c3a972c3aa74732e

Hors ligne

#12 15-12-2016 15:34:02

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Ok pourrais tu m'expliquer comment faire scratchhead.gif

“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

#13 15-12-2016 16:13:01

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : Error boot status deamon / Failed Plymouth Boot Screen

Quand tu es sur "grub", appuie sur la touche "e" quand tu sélectionne l'entrée que tu prend habituellement pour démarrer sous GNU/Linux.
Alternativement tu peux modifier les lignes directement via /boot/grub/grub.cfg (temporairement aussi). Quand tu sera sûr de ce qui règle la chose, tu ajoutera les changements dans /etc/default/grub.

C'est un peu confus, je sais, on se demande où on mets les pieds au début tongue

virtue_signaling.pngpalestine.png

En ligne

#14 15-12-2016 16:53:34

Strato
Membre
Distrib. : HandyLinux-2.5 = Debian 8.6 (jessie)
Noyau : Linux 3.16.0-4-amd64
(G)UI : XFCE
Inscription : 11-10-2016

Re : Error boot status deamon / Failed Plymouth Boot Screen

Oui, c'est pas mal confus en effet tongue J'essaye de parvenir à configurer tout bien pour pouvoir tout réinstaller proprement sur l'ordinateur. Pour le moment j'ai plusieurs install sur un disque dur externe, j'ai déjà réglé quelques problèmes tongue
En session Live-USB je ne passe pas par Grub il me semble, après avoir booté sur la clé j'arrive a l'écran

Boot menu a écrit :

Debian GNU/Linux:

Boot Menu

Live (amd64)*
Live (amd64 failsafe)
Install
Graphical install
Advanced options

Press ENTER to boot or TAB to edit a menu entry


J'ai essayé la touche "e" ça n'a rien fait.

Du coup j'ai quelques questions pour essayer de comprendre :
Dans ceci quelles sont les messages qui poses problème :

Loading, please wait...
[   4.192771] sd 0:0:0:0: [sda] No Catching mode page found
[   4.192843] sd 0:0:0:0: [sda] Assuming drive cache: write through
error : unexpectedly disconnected from boot status deamon
[  OK   ] A start job is running for live-config contains the components that configure a live system during the boot process (late userspace)..
 

Seul "error : unexpectedly disconnected from boot status deamon" constitue un problème ? Qu'est-ce que cela implique ? Même question pour :

[FAILED] Failed to start Show Plymouth Boot Screen
see 'systemctl status plymouth-start.service' for details.



Puis-je et doit-je régler ce problème avant ou après installation ? J'ai installé, Debian fonctionne, comment vérifier si ces erreurs sont toujours présentes après installation car lors du chargement elles ne s'affichent plus ?


“Quand je vois ce que je vois et que j'entends ce que j'entends, je suis bien content de penser ce que je pense.” Fernand Raynaud

Hors ligne

Pied de page des forums