logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 17-12-2016 11:12:31

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

[Résolu] Famille de CPU non supporté ?

Bonjour
j'aurais besoin d'une aide apres le résultat de cette commande

 dmesg | grep -iE 'firmware|microcode'


[    0.753630] microcode: AMD CPU family 0x6 not supported
[   11.453872] [drm] Loading R200 Microcode
[   11.569080] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin



dmesg


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007fff8000-0x000000007fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffee0000-0x00000000ffefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: American Megatrends Inc. Uknown/K7S8X., BIOS P2.40 06/25/2004
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 base 0D0000000 mask FFC000000 write-combining
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x017a1000, 0x017a1fff] PGTABLE
[    0.000000] BRK [0x017a2000, 0x017a3fff] PGTABLE
[    0.000000] BRK [0x017a4000, 0x017a4fff] PGTABLE
[    0.000000] BRK [0x017a5000, 0x017a5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c6a000-0x36e2cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAB70 000014 (v00 AMI   )
[    0.000000] ACPI: RSDT 0x000000007FFF0000 00002C (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: FACP 0x000000007FFF0030 000081 (v01 AMIINT SiS740XX 00000011 MSFT 0100000B)
[    0.000000] ACPI: DSDT 0x000000007FFF0120 0032B4 (v01 SiS    746      00000100 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x000000007FFF8000 000040
[    0.000000] ACPI: APIC 0x000000007FFF00C0 00005A (v01 AMIINT SiS740XX 00001000 MSFT 0100000B)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1161MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] BRK [0x017a6000, 0x017a6fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x7ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7ffeffff]
[    0.000000] On node 0 totalpages: 524174
[    0.000000] free_area_init_node: node 0, pgdat c1661280, node_mem_map f4c6a020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2324 pages used for memmap
[    0.000000]   HighMem zone: 297458 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f75e4000 s34752 r0 d22592 u57344
[    0.000000] pcpu-alloc: s34752 r0 d22592 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522402
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=3b1cdac6-86dc-4b37-a540-a2126d412019 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000375fe:0007fff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2053328K/2096696K available (4624K kernel code, 523K rwdata, 1452K rodata, 660K init, 460K bss, 43368K reserved, 1189832K highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc1675000 - 0xc171a000   ( 660 kB)
      .data : 0xc148473c - 0xc1673c80   (1981 kB)
      .text : 0xc1000000 - 0xc148473c   (4625 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f7006000 soft=f7008000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1916.232 MHz processor
[    0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3832.46 BogoMIPS (lpj=7664928)
[    0.004023] pid_max: default: 32768 minimum: 301
[    0.004052] ACPI: Core revision 20140424
[    0.011091] ACPI: All ACPI Tables successfully acquired
[    0.011135] Security Framework initialized
[    0.011175] AppArmor: AppArmor disabled by boot time parameter
[    0.011179] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011211] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011215] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011801] Initializing cgroup subsys memory
[    0.011817] Initializing cgroup subsys devices
[    0.011837] Initializing cgroup subsys freezer
[    0.011844] Initializing cgroup subsys net_cls
[    0.011860] Initializing cgroup subsys blkio
[    0.011871] Initializing cgroup subsys perf_event
[    0.011877] Initializing cgroup subsys net_prio
[    0.011927] mce: CPU supports 4 MCE banks
[    0.011951] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
tlb_flushall_shift: -1
[    0.018371] Freeing SMP alternatives memory: 20K (c171a000 - c171f000)
[    0.019837] ftrace: allocating 20830 entries in 41 pages
[    0.028254] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068298] smpboot: CPU0: AMD Athlon(tm) XP 2600+ (fam: 06, model: 0a, stepping: 00)
[    0.072000] Performance Events: AMD PMU driver.
[    0.072000] ... version:                0
[    0.072000] ... bit width:              48
[    0.072000] ... generic registers:      4
[    0.072000] ... value mask:             0000ffffffffffff
[    0.072000] ... max period:             00007fffffffffff
[    0.072000] ... fixed-purpose events:   0
[    0.072000] ... event mask:             000000000000000f
[    0.072000] x86: Booted up 1 node, 1 CPUs
[    0.072000] smpboot: Total of 1 processors activated (3832.46 BogoMIPS)
[    0.072682] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072932] devtmpfs: initialized
[    0.073406] PM: Registering ACPI NVS region [mem 0x7fff8000-0x7fffffff] (32768 bytes)
[    0.075584] pinctrl core: initialized pinctrl subsystem
[    0.075733] NET: Registered protocol family 16
[    0.075969] cpuidle: using governor ladder
[    0.075975] cpuidle: using governor menu
[    0.076153] ACPI: bus type PCI registered
[    0.076158] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.078001] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
[    0.078004] PCI: Using configuration type 1 for base access
[    0.080150] ACPI: Added _OSI(Module Device)
[    0.080154] ACPI: Added _OSI(Processor Device)
[    0.080156] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.080158] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084267] ACPI: Interpreter enabled
[    0.084292] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.084314] ACPI: (supports S0 S1 S3 S4 S5)
[    0.084317] ACPI: Using IOAPIC for interrupt routing
[    0.084364] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.085954] ACPI: Power Resource [URP1] (off)
[    0.087134] ACPI: Power Resource [URP2] (off)
[    0.087201] ACPI: Power Resource [FDDP] (off)
[    0.087271] ACPI: Power Resource [LPTP] (off)
[    0.089999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.090011] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.090020] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.090129] acpi PNP0A03:00: host bridge window expanded to [mem 0x80000000-0xffdfffff]; [mem 0x80000000-0xffdfffff] ignored
[    0.090140] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cb000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ccfff])
[    0.090146] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.090331] PCI host bridge to bus 0000:00
[    0.090337] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.090341] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.090345] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.090349] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.090352] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffdfffff]
[    0.090376] pci 0000:00:00.0: [1039:0746] type 00 class 0x060000
[    0.090395] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd3ffffff]
[    0.090574] pci 0000:00:01.0: [1039:0002] type 01 class 0x060400
[    0.090710] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
[    0.090777] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.090896] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[    0.090941] pci 0000:00:02.1: reg 0x20: [io  0x0c00-0x0c1f]
[    0.091073] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[    0.091126] pci 0000:00:02.5: reg 0x20: [io  0xff00-0xff0f]
[    0.091147] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.091151] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.091154] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.091158] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.091277] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[    0.091296] pci 0000:00:02.7: reg 0x10: [io  0xdc00-0xdcff]
[    0.091307] pci 0000:00:02.7: reg 0x14: [io  0xd800-0xd87f]
[    0.091375] pci 0000:00:02.7: supports D1 D2
[    0.091379] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.091508] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.091524] pci 0000:00:03.0: reg 0x10: [mem 0xcfffd000-0xcfffdfff]
[    0.091618] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.091708] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.091723] pci 0000:00:03.1: reg 0x10: [mem 0xcfffe000-0xcfffefff]
[    0.091815] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.091912] pci 0000:00:03.2: [1039:7002] type 00 class 0x0c0320
[    0.091931] pci 0000:00:03.2: reg 0x10: [mem 0xcffff000-0xcfffffff]
[    0.092011] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.092059] pci 0000:00:03.2: System wakeup disabled by ACPI
[    0.092158] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
[    0.092177] pci 0000:00:04.0: reg 0x10: [io  0xd400-0xd4ff]
[    0.092188] pci 0000:00:04.0: reg 0x14: [mem 0xcfffc000-0xcfffcfff]
[    0.092230] pci 0000:00:04.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.092260] pci 0000:00:04.0: supports D1 D2
[    0.092263] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.092310] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.092489] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[    0.092507] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc7ffffff pref]
[    0.092516] pci 0000:01:00.0: reg 0x14: [io  0xb800-0xb8ff]
[    0.092526] pci 0000:01:00.0: reg 0x18: [mem 0xcfef0000-0xcfefffff]
[    0.092553] pci 0000:01:00.0: reg 0x30: [mem 0xcfec0000-0xcfedffff pref]
[    0.092585] pci 0000:01:00.0: supports D1 D2
[    0.092673] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[    0.092689] pci 0000:01:00.1: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[    0.092699] pci 0000:01:00.1: reg 0x14: [mem 0xcfee0000-0xcfeeffff]
[    0.092751] pci 0000:01:00.1: supports D1 D2
[    0.092857] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.092864] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.092870] pci 0000:00:01.0:   bridge window [mem 0xcfd00000-0xcfefffff]
[    0.092876] pci 0000:00:01.0:   bridge window [mem 0xafa00000-0xcfbfffff pref]
[    0.092886] pci_bus 0000:00: on NUMA node 0
[    0.093630] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.093719] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.093807] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.093898] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.093989] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.094079] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.094168] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.094255] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.094627] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.094632] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.094634] vgaarb: loaded
[    0.094637] vgaarb: bridge control possible 0000:01:00.0
[    0.094781] PCI: Using ACPI for IRQ routing
[    0.094812] PCI: pci_cache_line_size set to 32 bytes
[    0.094853] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.094858] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.095238] Switched to clocksource refined-jiffies
[    0.108342] pnp: PnP ACPI init
[    0.108378] ACPI: bus type PNP registered
[    0.108721] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.108726] system 00:00: [io  0x0295-0x0296] has been reserved
[    0.108731] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.108735] system 00:00: [io  0x0880-0x08ff] has been reserved
[    0.108739] system 00:00: [io  0x0c00-0x0c1f] has been reserved
[    0.108746] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.108754] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.108846] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.108974] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.109088] pnp 00:03: [dma 2]
[    0.109170] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.109508] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.109896] pnp 00:05: [dma 0]
[    0.110024] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.110255] pnp 00:06: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.110484] pnp: PnP ACPI: found 7 devices
[    0.110487] ACPI: bus type PNP unregistered
[    0.110495] PnPBIOS: Disabled by ACPI PNP
[    0.148809] Switched to clocksource acpi_pm
[    0.148830] pci 0000:00:04.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.148862] pci 0000:00:04.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[    0.148871] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[    0.148876] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.148885] pci 0000:00:01.0:   bridge window [mem 0xcfd00000-0xcfefffff]
[    0.148891] pci 0000:00:01.0:   bridge window [mem 0xafa00000-0xcfbfffff pref]
[    0.148901] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.148904] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.148908] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.148911] pci_bus 0000:00: resource 7 [mem 0x80000000-0xffdfffff]
[    0.148915] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.148919] pci_bus 0000:01: resource 1 [mem 0xcfd00000-0xcfefffff]
[    0.148922] pci_bus 0000:01: resource 2 [mem 0xafa00000-0xcfbfffff pref]
[    0.148978] NET: Registered protocol family 2
[    0.149432] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.149510] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.149653] TCP: Hash tables configured (established 8192 bind 8192)
[    0.149830] TCP: reno registered
[    0.149834] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.149864] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.149989] NET: Registered protocol family 1
[    0.150783] pci 0000:01:00.0: Video device with shadowed ROM
[    0.150790] PCI: CLS 32 bytes, default 32
[    0.150929] Unpacking initramfs...
[    0.753347] Freeing initrd memory: 18188K (f5c6a000 - f6e2d000)
[    0.753630] microcode: AMD CPU family 0x6 not supported
[    0.754272] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.754340] audit: initializing netlink subsys (disabled)
[    0.754402] audit: type=2000 audit(1481961801.751:1): initialized
[    0.755039] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.755073] zbud: loaded
[    0.755202] VFS: Disk quotas dquot_6.5.2
[    0.755233] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.755356] msgmni has been set to 1722
[    0.755950] alg: No test for stdrng (krng)
[    0.755985] bounce: pool size: 64 pages
[    0.756057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.756135] io scheduler noop registered
[    0.756140] io scheduler deadline registered
[    0.756195] io scheduler cfq registered (default)
[    0.756412] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.756453] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.756559] GHES: HEST is not enabled!
[    0.756605] isapnp: Scanning for PnP cards...
[    1.109851] isapnp: No Plug & Play device found
[    1.110003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.130385] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.131016] Linux agpgart interface v0.103
[    1.131201] agpgart-sis 0000:00:00.0: SiS chipset [1039/0746]
[    1.136480] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[    1.136774] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.136778] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.137002] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.137246] mousedev: PS/2 mouse device common for all mice
[    1.137346] rtc_cmos 00:01: RTC can wake from S4
[    1.137539] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.137568] rtc_cmos 00:01: alarms up to one year, 114 bytes nvram
[    1.137599] ledtrig-cpu: registered to indicate activity on CPUs
[    1.138071] TCP: cubic registered
[    1.138103] NET: Registered protocol family 10
[    1.138560] mip6: Mobile IPv6
[    1.138568] NET: Registered protocol family 17
[    1.138581] mpls_gso: MPLS GSO support
[    1.138823] Using IPI No-Shortcut mode
[    1.139055] registered taskstats version 1
[    1.139515] rtc_cmos 00:01: setting system clock to 2016-12-17 08:03:23 UTC (1481961803)
[    1.139625] PM: Hibernation image not present or could not be loaded.
[    1.140836] Freeing unused kernel memory: 660K (c1675000 - c171a000)
[    1.140913] Write protecting the kernel text: 4628k
[    1.140960] Write protecting the kernel read-only data: 1456k
[    1.164413] systemd-udevd[55]: starting version 215
[    1.165170] random: systemd-udevd urandom read with 0 bits of entropy available
[    1.169981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.207028] ACPI: bus type USB registered
[    1.207104] usbcore: registered new interface driver usbfs
[    1.207131] usbcore: registered new interface driver hub
[    1.219943] sis900.c: v1.08.10 Apr. 2 2006
[    1.221265] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    1.230115] 0000:00:04.0: Using transceiver found at address 1 as default
[    1.233451] Floppy drive(s): fd0 is 1.44M
[    1.234502] SCSI subsystem initialized
[    1.241199] usbcore: registered new device driver usb
[    1.242485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.242780] ehci-pci: EHCI PCI platform driver
[    1.243677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.252110] FDC 0 is a post-1991 82077
[    1.255456] eth0: SiS 900 PCI Fast Ethernet at 0x0001d400, IRQ 19, 00:0b:6a:21:36:a3
[    1.257375] ehci-pci 0000:00:03.2: EHCI Host Controller
[    1.257397] ehci-pci 0000:00:03.2: new USB bus registered, assigned bus number 1
[    1.257517] ehci-pci 0000:00:03.2: irq 23, io mem 0xcffff000
[    1.268170] ehci-pci 0000:00:03.2: USB 2.0 started, EHCI 1.00
[    1.268342] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.268346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.268350] usb usb1: Product: EHCI Host Controller
[    1.268353] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[    1.268356] usb usb1: SerialNumber: 0000:00:03.2
[    1.268664] hub 1-0:1.0: USB hub found
[    1.268682] hub 1-0:1.0: 6 ports detected
[    1.269767] ohci-pci: OHCI PCI platform driver
[    1.270064] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    1.270080] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.270153] ohci-pci 0000:00:03.0: irq 20, io mem 0xcfffd000
[    1.271007] libata version 3.00 loaded.
[    1.326115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.326125] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.326129] usb usb2: Product: OHCI PCI host controller
[    1.326132] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.326135] usb usb2: SerialNumber: 0000:00:03.0
[    1.326447] hub 2-0:1.0: USB hub found
[    1.326464] hub 2-0:1.0: 3 ports detected
[    1.326748] pata_sis 0000:00:02.5: version 0.5.2
[    1.326787] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
[    1.328720] scsi0 : pata_sis
[    1.328979] scsi1 : pata_sis
[    1.329085] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.329088] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.329534] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    1.329549] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    1.329615] ohci-pci 0000:00:03.1: irq 21, io mem 0xcfffe000
[    1.386078] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.386083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.386086] usb usb3: Product: OHCI PCI host controller
[    1.386089] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae ohci_hcd
[    1.386092] usb usb3: SerialNumber: 0000:00:03.1
[    1.386491] hub 3-0:1.0: USB hub found
[    1.386508] hub 3-0:1.0: 3 ports detected
[    1.501157] ata1.00: HPA detected: current 156299375, native 156301488
[    1.501171] ata1.00: ATA-6: WDC WD800BB-00FRA0, 77.07W77, max UDMA/100
[    1.501175] ata1.00: 156299375 sectors, multi 16: LBA48
[    1.501283] ata1.01: ATA-7: SAMSUNG SP1614N, TM100-30, max UDMA/100
[    1.501288] ata1.01: 312581808 sectors, multi 16: LBA48
[    1.517159] ata1.00: configured for UDMA/100
[    1.524347] ata1.01: configured for UDMA/100
[    1.524604] scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BB-00FR 7W77 PQ: 0 ANSI: 5
[    1.525248] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SP1614N  0-30 PQ: 0 ANSI: 5
[    1.688476] ata2.00: ATAPI: PHILIPS DVDR1640P, P2.0, max UDMA/33
[    1.704458] ata2.00: configured for UDMA/33
[    1.707130] scsi 1:0:0:0: CD-ROM            PHILIPS  DVDR1640P        P2.0 PQ: 0 ANSI: 5
[    1.725408] sd 0:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.725507] sd 0:0:0:0: [sda] Write Protect is off
[    1.725513] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.725550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.731118] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    1.731129] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.731675] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.734527] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.734773] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    1.734896] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    1.747526] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.752070] tsc: Refined TSC clocksource calibration: 1916.314 MHz
[    1.770701] sd 0:0:1:0: [sdb] Write Protect is off
[    1.770768] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.770946] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.771270]  sda: sda1 sda2 < sda5 >
[    1.773464] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.801252]  sdb: sdb1 sdb2 sdb3
[    1.805133] sd 0:0:1:0: [sdb] Attached SCSI disk
[    1.828043] usb 3-2: new low-speed USB device number 2 using ohci-pci
[    2.038034] usb 3-2: New USB device found, idVendor=04f3, idProduct=0234
[    2.038044] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.038048] usb 3-2: Product: OM
[    2.044533] hidraw: raw HID events driver (C) Jiri Kosina
[    2.053504] usbcore: registered new interface driver usbhid
[    2.053513] usbhid: USB HID core driver
[    2.058719] input: OM as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/0003:04F3:0234.0001/input/input1
[    2.059017] hid-generic 0003:04F3:0234.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:03.1-2/input0
[    2.564710] PM: Starting manual resume from disk
[    2.564729] PM: Hibernation image partition 8:5 present
[    2.564731] PM: Looking for hibernation image.
[    2.585893] PM: Image not found (code -22)
[    2.585897] PM: Hibernation image not present or could not be loaded.
[    2.642647] random: nonblocking pool is initialized
[    2.752127] Switched to clocksource tsc
[    3.024805] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.927741] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    3.928102] systemd[1]: Detected architecture 'x86'.
[    4.116935] systemd[1]: Inserted module 'autofs4'
[    4.139844] systemd[1]: Set hostname to <handylinux>.
[    4.139951] systemd[1]: Initializing machine ID from random generator.
[    4.140075] systemd[1]: Installed transient /etc/machine-id file.
[    5.905507] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.905670] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.905697] systemd[1]: Starting Remote File Systems (Pre).
[    5.905761] systemd[1]: Reached target Remote File Systems (Pre).
[    5.905805] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.905862] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.905906] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.906103] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.906137] systemd[1]: Starting Encrypted Volumes.
[    5.906157] systemd[1]: Reached target Encrypted Volumes.
[    5.906179] systemd[1]: Expecting device dev-disk-by\x2duuid-7b38dcc2\x2db044\x2d4ae8\x2d82e9\x2d0bb1b3761976.device...
[    5.906204] systemd[1]: Starting Root Slice.
[    5.906256] systemd[1]: Created slice Root Slice.
[    5.906277] systemd[1]: Starting User and Session Slice.
[    5.906355] systemd[1]: Created slice User and Session Slice.
[    5.906378] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.906471] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.906494] systemd[1]: Starting Delayed Shutdown Socket.
[    5.906561] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.906584] systemd[1]: Starting Journal Socket (/dev/log).
[    5.906642] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.906671] systemd[1]: Starting udev Control Socket.
[    5.906716] systemd[1]: Listening on udev Control Socket.
[    5.906742] systemd[1]: Starting udev Kernel Socket.
[    5.906787] systemd[1]: Listening on udev Kernel Socket.
[    5.906817] systemd[1]: Starting Journal Socket.
[    5.906880] systemd[1]: Listening on Journal Socket.
[    5.906922] systemd[1]: Starting System Slice.
[    5.906982] systemd[1]: Created slice System Slice.
[    5.907014] systemd[1]: Started File System Check on Root Device.
[    5.907033] systemd[1]: Starting system-getty.slice.
[    5.907140] systemd[1]: Created slice system-getty.slice.
[    5.907185] systemd[1]: Starting Increase datagram queue length...
[    5.946058] systemd[1]: Started Set Up Additional Binary Formats.
[    5.946150] systemd[1]: Starting udev Coldplug all Devices...
[    5.947677] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.949030] systemd[1]: Mounting POSIX Message Queue File System...
[    6.022830] systemd[1]: Starting Load Kernel Modules...
[    6.024355] systemd[1]: Mounting Debug File System...
[    6.025556] systemd[1]: Mounting Huge Pages File System...
[    6.026673] systemd[1]: Starting LSB: Set keymap...
[    6.027749] systemd[1]: Starting Slices.
[    6.027790] systemd[1]: Reached target Slices.
[    6.071951] systemd[1]: Started LSB: Set keymap.
[    6.112454] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    6.112864] systemd[1]: Starting Create Static Device Nodes in /dev...
[    6.166350] systemd[1]: Started udev Coldplug all Devices.
[    6.558359] systemd[1]: Mounted Huge Pages File System.
[    6.558478] systemd[1]: Mounted Debug File System.
[    6.558526] systemd[1]: Mounted POSIX Message Queue File System.
[    6.559102] systemd[1]: Started Increase datagram queue length.
[    6.559824] systemd[1]: Starting Syslog Socket.
[    6.559914] systemd[1]: Listening on Syslog Socket.
[    6.559949] systemd[1]: Starting Journal Service...
[    6.563290] systemd[1]: Started Journal Service.
[    6.980684] lp: driver loaded but no devices found
[    7.032311] ppdev: user-space parallel port driver
[    7.082232] parport_pc 00:05: reported by Plug and Play ACPI
[    7.082350] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    7.169544] systemd-udevd[156]: starting version 215
[    7.176423] lp0: using parport0 (interrupt-driven).
[    7.403628] fuse init (API version 7.23)
[    8.619396] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.619413] ACPI: Power Button [PWRB]
[    8.619572] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.619577] ACPI: Power Button [PWRF]
[    8.855869] MPU-401 device not found or device busy
[    9.264071] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.312049] gameport gameport0: NS558 PnP Gameport is pnp00:06/gameport0, io 0x200, speed 890kHz
[    9.384047] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 52905 usecs (2545 samples)
[    9.384058] snd_intel8x0 0000:00:02.7: clocking to 48000
[    9.385026] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[    9.385037] ACPI Warning: SystemIO range 0x0000000000000C00-0x0000000000000C1F conflicts with OpRegion 0x0000000000000C00-0x0000000000000C1F (\_SB_.PCI0.SBRG.SMRG) (20140424/utaddress-254)
[    9.385047] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.385319] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.890644] systemd-journald[150]: Received request to flush runtime journal from PID 1
[   10.024916] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.705309] [drm] Initialized drm 1.1.0 20060810
[   10.747541] systemd-journald[150]: Received request to flush runtime journal from PID 1
[   10.850134] Adding 3211260k swap on /dev/sda5.  Priority:-1 extents:1 across:3211260k FS
[   11.436795] [drm] radeon kernel modesetting enabled.
[   11.437712] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x17AF:0x2012).
[   11.437743] [drm] register mmio base: 0xCFEF0000
[   11.437746] [drm] register mmio size: 65536
[   11.438121] agpgart-sis 0000:00:00.0: AGP 3.0 bridge
[   11.438137] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode
[   11.438143] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover
[   11.452045] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode
[   11.452060] radeon 0000:01:00.0: GTT: 64M 0xD0000000 - 0xD3FFFFFF
[   11.452066] [drm] Generation 2 PCI interface, using max accessible memory
[   11.452073] radeon 0000:01:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
[   11.452107] [drm] Detected VRAM RAM=128M, BAR=128M
[   11.452109] [drm] RAM width 64bits DDR
[   11.452258] [TTM] Zone  kernel: Available graphics memory: 441182 kiB
[   11.452261] [TTM] Zone highmem: Available graphics memory: 1036098 kiB
[   11.452264] [TTM] Initializing pool allocator
[   11.452277] [TTM] Initializing DMA pool allocator
[   11.452332] [drm] radeon: 128M of VRAM memory ready
[   11.452336] [drm] radeon: 64M of GTT memory ready.
[   11.453738] radeon 0000:01:00.0: WB disabled
[   11.453760] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000d0000000 and cpu addr 0xf7e0a000
[   11.453768] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.453770] [drm] Driver supports precise vblank timestamp query.
[   11.453823] [drm] radeon: irq initialized.
[   11.453872] [drm] Loading R200 Microcode
[   11.569080] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin
[   11.569443] [drm] radeon: ring at 0x00000000D0001000
[   11.569472] [drm] ring test succeeded in 1 usecs
[   11.569707] [drm] ib test succeeded in 0 usecs
[   11.570768] [drm] Radeon Display Connectors
[   11.570772] [drm] Connector 0:
[   11.570774] [drm]   VGA-1
[   11.570777] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   11.570779] [drm]   Encoders:
[   11.570781] [drm]     CRT1: INTERNAL_DAC1
[   11.570784] [drm] Connector 1:
[   11.570785] [drm]   DVI-I-1
[   11.570787] [drm]   HPD1
[   11.570790] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   11.570791] [drm]   Encoders:
[   11.570793] [drm]     CRT2: INTERNAL_DAC2
[   11.570795] [drm]     DFP1: INTERNAL_TMDS1
[   11.570797] [drm] Connector 2:
[   11.570798] [drm]   SVIDEO-1
[   11.570800] [drm]   Encoders:
[   11.570801] [drm]     TV1: INTERNAL_DAC2
[   11.633483] [drm] fb mappable at 0xC0040000
[   11.633492] [drm] vram apper at 0xC0000000
[   11.633494] [drm] size 5242880
[   11.633496] [drm] fb depth is 24
[   11.633498] [drm]    pitch is 5120
[   11.633840] fbcon: radeondrmfb (fb0) is primary device
[   11.711534] Console: switching to colour frame buffer device 160x64
[   11.741660] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   11.741665] radeon 0000:01:00.0: registered panic notifier
[   11.741684] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[   19.613436] cfg80211: Calling CRDA to update world regulatory domain
[   21.356304] eth0: Media Link Off
[   26.370010] eth0: Media Link On 100mbps full-duplex
[   26.370065] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1744.082169] perf interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 3626.507499] perf interrupt took too long (5014 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 7405.412420] end_request: I/O error, dev fd0, sector 0
[ 7405.412435] floppy: error -5 while reading block 0
[ 7417.572629] end_request: I/O error, dev fd0, sector 0
[ 7417.572644] floppy: error -5 while reading block 0
 



D’après ce que je comprend mon CPU n'est pas supporté et le firmware R200 est utilisé pour ma carte graphique

Voici ma config

    Informations sur handylinux

Cette page vous permettra de transmettre des informations à propos de votre système pour obtenir de l'aide sur le forum HandyLinux : le texte sera pré-formaté, il vous suffit de "coller" sur le forum.
Vous pouvez l'éditer afin de supprimer les informations inutiles (ou ce paragraphe).

Installation : ante HandyLinux-1.5.1
Version : not an HandyLinux system
Kernel : Linux 3.16.0-4-686-pae

lspci :
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746 Host (rev 10)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)
00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) (rev 01)

lsusb :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 04f3:0234 Elan Microelectronics Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Info matériel :
BIOS Information
  Vendor: American Megatrends Inc.
  Version: P2.40
  Release Date: 06/25/2004
  Address: 0xF0000
  Runtime Size: 64 kB
  ROM Size: 256 kB
  Characteristics:
    ISA is supported
    PCI is supported
    PNP is supported
    APM is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    ESCD support is available
    Boot from CD is supported
    Selectable boot is supported
    BIOS ROM is socketed
    EDD is supported
    5.25"/360 kB floppy services are supported (int 13h)
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 kB floppy services are supported (int 13h)
    3.5"/2.88 MB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Printer services are supported (int 17h)
    CGA/mono video services are supported (int 10h)
    ACPI is supported
    USB legacy is supported
    AGP is supported
    LS-120 boot is supported
    ATAPI Zip drive boot is supported
    BIOS boot specification is supported

System Information
  Manufacturer: American Megatrends Inc.
  Product Name: Uknown
  Version: 1.0
  Serial Number: 00000000
  UUID: Not Present
  Wake-up Type: Power Switch

Processor Information
  Socket Designation: Socket-A
  Type: Unknown
  Family: Unknown
  Manufacturer: AMD                                            
  ID: A0 06 00 00 55 00 00 00
  Version: AMD Athlon(tm) XP 2600+                        
  Voltage: 3.3 V 2.9 V
  External Clock: 166 MHz
  Max Speed: 3000 MHz
  Current Speed: 1917 MHz
  Status: Populated, Enabled
  Upgrade: Socket A (Socket 462)

Memory Controller Information
  Error Detecting Method: 32-bit ECC
  Error Correcting Capabilities:
    Single-bit Error Correcting
  Supported Interleave: One-way Interleave
  Current Interleave: One-way Interleave
  Maximum Memory Module Size: 128 MB
  Maximum Total Memory Size: 384 MB
  Supported Speeds:
    70 ns
    60 ns
  Supported Memory Types:
    Standard
    FPM
    EDO
    Parity
    ECC
    SIMM
  Memory Module Voltage: 3.3 V
  Associated Memory Slots: 3
    0x0008
    0x0009
    0x000A
  Enabled Error Correcting Capabilities:
    Single-bit Error Correcting

Memory Module Information
  Socket Designation: ROW-0
  Bank Connections: 6
  Current Speed: Unknown
  Type: DIMM SDRAM
  Installed Size: 1024 MB (Double-bank Connection)
  Enabled Size: 1024 MB (Double-bank Connection)
  Error Status: OK

Memory Module Information
  Socket Designation: ROW-1
  Bank Connections: 6
  Current Speed: Unknown
  Type: DIMM SDRAM
  Installed Size: 1024 MB (Double-bank Connection)
  Enabled Size: 1024 MB (Double-bank Connection)
  Error Status: OK

Memory Module Information
  Socket Designation: ROW-2
  Bank Connections: 0 0
  Current Speed: Unknown
  Type: Unknown
  Installed Size: Not Installed
  Enabled Size: Not Installed
  Error Status: OK

System Configuration Options
  Option 1: System Management BIOS from Atlanta
  Option 2: SMBIOS from AMI


Écran et affichage :
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 4096 x 4096
VGA-0 disconnected (normal left inverted right x axis y axis)
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
   1280x1024     60.02*+  75.02  
   1152x864      75.00  
   1024x768      75.08    75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    60.00    59.94  
   720x400       70.08  
S-video disconnected (normal left inverted right x axis y axis)

Système de fichier :
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1           71G    4,1G   63G   7% /
udev                10M       0   10M   0% /dev
tmpfs              405M    5,6M  400M   2% /run
tmpfs             1012M    316K 1012M   1% /dev/shm
tmpfs              5,0M    4,0K  5,0M   1% /run/lock
tmpfs             1012M       0 1012M   0% /sys/fs/cgroup
tmpfs              203M    4,0K  203M   1% /run/user/109
tmpfs              203M    8,0K  203M   1% /run/user/1000

Partitionnement :
Disk /dev/sda: 74,5 GiB, 80025280000 bytes, 156299375 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x5192b8ac

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sda1  *         2048 149872639 149870592 71,5G 83 Linux
/dev/sda2       149874686 156297215   6422530  3,1G  5 Extended
/dev/sda5       149874688 156297215   6422528  3,1G 82 Linux swap / Solaris

Disk /dev/sdb: 149,1 GiB, 160041885696 bytes, 312581808 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0000cc4f

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sdb1            2048 156293119 156291072 74,5G  7 HPFS/NTFS/exFAT
/dev/sdb2       156293120 308205567 151912448 72,4G 83 Linux
/dev/sdb3       308205568 312580095   4374528  2,1G 82 Linux swap / Solaris


Réseau :
    network/interfaces :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

    resolv.conf :
# Generated by NetworkManager
search home
nameserver 127.0.0.1
nameserver 192.168.1.1

    ifconfig :
eth0      Link encap:Ethernet  HWaddr 00:0b:6a:21:36:a3  
          inet adr:192.168.1.201  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::20b:6aff:fe21:36a3/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:56349 errors:0 dropped:0 overruns:0 frame:0
          TX packets:39392 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:65654483 (62.6 MiB)  TX bytes:4279963 (4.0 MiB)

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:800 errors:0 dropped:0 overruns:0 frame:0
          TX packets:800 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:88849 (86.7 KiB)  TX bytes:88849 (86.7 KiB)


    route :
Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    1024   0        0 eth0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0

Sources :
/etc/apt/sources.list:
##DEBIAN Jessie##
deb http://httpredir.debian.org/debian/ jessie main contrib non-free
#deb-src http://httpredir.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
#deb-src http://security.debian.org/ jessie/updates main contrib non-free
deb http://httpredir.debian.org/debian/ jessie-updates main contrib non-free
#deb-src http://httpredir.debian.org/debian/ jessie-updates main contrib non-free

#deb http://ftp.debian.org/debian/ jessie-backports main contrib non-free
#deb-src http://ftp.debian.org/debian/ jessie-backports main contrib non-free
/etc/apt/sources.list.d/mozilla.list
## Mozilla ##
deb http://mozilla.debian.net/ jessie-backports firefox-release
/etc/apt/sources.list.d/handylinux.list
## HandyLinux Jessie ##
deb http://repo.handylinux.org/debian jessie main
#deb-src http://repo.handylinux.org/debian jessie main

## HandyLinux Testing ## @commenter avant le dernier build
#deb http://repo.handylinux.org/debian testing main
#deb-src http://repo.handylinux.org/debian testing main

 



C'est une installation refait au propre sur disque entier avec le mode automatique en partant d'une clé USB avec Handylinux 2.5
Apres j'ai lancé installé le script Handy2Debian pour passé sur Débian simple avec Lightdm et XFCE

Dernière modification par Croutons (17-12-2016 15:41:53)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#2 17-12-2016 12:10:46

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : [Résolu] Famille de CPU non supporté ?

Tenté d'installer les blobs kernel ?

apt-get install firmware-linux-nonfree



Tiens et je serai pas contre de savoir à quoi ça peut bien servir les microcodes. C'est des set d'instructions en plus qui ne sont pas utilisés sinon ? J'ai utilise "Parabola" pendant des années sans aucun problème avec un message d'erreur sur le micro-code au démarrage.


virtue_signaling.pngpalestine.png

Hors ligne

#3 17-12-2016 12:24:41

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : [Résolu] Famille de CPU non supporté ?

J'ai cherché dans synaptic le paquet est déja installé
Ce qui est étrange c'est que mon CPU est bien listé comme athlon 2600+ et ma carte comme radeon 9200SE
Donc pourquoi mal installé par la suite?

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#4 17-12-2016 12:44:36

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : [Résolu] Famille de CPU non supporté ?

Le GPU a l'air bien supporté.

[   11.569080] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin


Juste manque un pitit microcode de CPU, et comme je te disais plus haut, j'ai aucune idée de l'impact, chez moi c'était pas même visible.

C'est pas "mal installé", juste des avertissements absolument non critique, on peut vivre avec.


virtue_signaling.pngpalestine.png

Hors ligne

#5 17-12-2016 12:48:52

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Famille de CPU non supporté ?

Ces messages sont normaux.

La première ligne concerne le firmware du processeur alors que les deux autres concernent le firmware de la carte graphique (GPU). Ce sont deux choses totalement indépendantes.

Un microcode pour processeur sert à "patcher" un processeur pour corriger des bugs ou des failles de son microcode interne. Mais il faut le recharger à chaque mise sous tension. Il est optionnel.

Un microcode pour périphérique (carte graphique, carte réseau ou wifi...) est un programme chargé par le système hôte sur le périphérique et excuté par ce dernier. Il est généralement obligatoire pour faire fonctionner le périphérique.

Le processeur est de la famille AMD Athlon XP (32 bits), or le support des microcodes pour les processeurs Athlon ne commence qu'à partir de la famille Athlon 64 K10 (Athlon II).

Il vaut mieux montrer que raconter.

Hors ligne

#6 17-12-2016 15:31:50

anonyme
Invité

Re : [Résolu] Famille de CPU non supporté ?

Bonjour
le paquet amd64-microcode n'est pas obligatoire , le bios contient déla les microcodes (si il est a jour pour ton cpu ).
pour le gpu il est bien reconnu par le noyau rien a faire
les messages sont informatif

#7 17-12-2016 15:40:38

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : [Résolu] Famille de CPU non supporté ?

ok merci a vous pour les précisions
J'avais flashé le Bios a un moment pour utiliser un disque dur plus gros il me semble
par contre pour la carte graphique le "R200" est chargé alors que c'est "RV280" pour ma carte
Enfin je passe en résolu vu que le sujet était le CPU

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#8 17-12-2016 15:47:53

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Famille de CPU non supporté ?

Le firmware R200_cp.bin doit être commun à toute la famille R200.
Pour mon GPU RV370, le pilote radeon charge le firmware R300_cp.bin.

Il vaut mieux montrer que raconter.

Hors ligne

#9 17-12-2016 15:52:58

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : [Résolu] Famille de CPU non supporté ?

ah ok  donc RV280 pour l’appellation de la carte n'a rien a voir avec le microcode chargé
me voila rassuré en tout points
merci bien
Désolé mais j'ai le soucis du détail merci.gif

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#10 17-12-2016 16:02:48

raleur
Membre
Inscription : 03-10-2014

Re : [Résolu] Famille de CPU non supporté ?

Si quand même, le GPU RV280 (Radeon 9200) fait partie de la série Radeon R200.
https://en.wikipedia.org/wiki/ATI_Radeon_R200_series

Il vaut mieux montrer que raconter.

Hors ligne

Pied de page des forums