logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 16-12-2016 01:07:49

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

freeze incompréhensibles - stretch [resolu]

Bonjour,

ma machine récemment installée avec quelques soucis exposés précédemment https://debian-facile.org/viewtopic.php?id=16099 freeze régulièrement

c'est un blocage total avec perte totale de contrôle (plus de souris, plus de clavier, même chose avec une souris USB connectée en filaire)

les seules choses que j'ai pu noté en console (ctrl alt f1) :

[    1.993787] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed
40080-0xfed40fff]
[    2.358240] nouveau 0000:01:00.0: priv: HUB0: 085014 ffffffff (1c70820b)



il se pourrait que cela soit encore le pilote Nouveau qui pose problème

je n'ai pas testé la mémoire mais je vais le faire dans la nuit, le disque dur est un SSD Samsung 250 go, la machine ne chauffe, pas le processeur est à peine chatouillé pas XFCE ou KDE

Bah vi 16 Go de RAM et ssd + intel core i5 + Nvidia GeForce GT720 2 Go, ça drope, la machine n'a pas un mois lol

merci de m'aider en m'indiquant de quel côté je peux aller hmm

avec mes remerciements
Totophe56

Dernière modification par totophe56 (05-02-2017 20:07:17)

Hors ligne

#2 16-12-2016 02:21:00

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : freeze incompréhensibles - stretch [resolu]

Ouaip, tester la ram et le SSD. Les couilles avec les SSD sont pas tellement rares. Et oui la CG cause aussi ce genre de choses... hmm

virtue_signaling.pngpalestine.png

Hors ligne

#3 16-12-2016 10:05:32

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

la ram c'est fait et tout ok

le proc ne monte pas au dessus de 30 degrés

le ssd je peux utiliser les même utilitaire qu'un disque à plateau qu'il y a sur UBCD ?

je le sens bien qu'il va falloir une ou deux MAJ du pilote graphique smile

Hors ligne

#4 16-12-2016 12:24:26

--gilles--
Membre
Lieu : Orléans - La Source
Distrib. : Debian 12
Noyau : Linux 6.1.0-18-amd64
(G)UI : Gnome - mutter 43.8-0+deb12u1
Inscription : 15-02-2016

Re : freeze incompréhensibles - stretch [resolu]

Est-ce que le swap est bien activé ?
Que donne :

 free -m


Si tout le monde pense pareil, c'est qu'aucune personne ne pense beaucoup.
 Intel® Core™2 Duo E8500  × 2
4,0 Gio DDR3 - 1333 MHz
Et si vous cherchiez votre solution dans le wiki => https://debian-facile.org/accueil palestine.png

Hors ligne

#5 17-12-2016 00:12:15

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

bonoir,

oui il est bien activé


free -m
              total        used        free      shared  buff/cache   available
Mem:          15905        1127       13626         107        1151       14394
Swap:          4767



aptitude upgrade ce matin avec mise à jour du kernel, pas de plantage depuis mais toujours le message d'erreur avec nouveau en terminal (ctrl alt f1), je reste en stand by et vous tiens au courant smile

Hors ligne

#6 17-12-2016 00:48:50

otyugh
CA Debian-Facile
Lieu : Quimperlé/Arzano
Distrib. : Debian Stable
Inscription : 20-09-2016
Site Web

Re : freeze incompréhensibles - stretch [resolu]

Autres source de problèmes possibles :
->des fluctuation d'electricité
->un mode overcloack dans l'uefi
->de bêtes peripheriques USB/PCI

En fait ce qui est rageant c'est qu'y a un peu trop de choses possibles avec ce symptôme >.>

virtue_signaling.pngpalestine.png

Hors ligne

#7 07-01-2017 11:46:38

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

Bonjour,

je reviens vers vous car les soucis sont toujours présents

pourriez-vous me dire où je pourrait trouver des logs qui pourraient m'aiguiller sur la raison de ces freeze svp

merci d'avance pour vos conseils

Totophe56

Hors ligne

#8 07-01-2017 12:50:49

anonyme
Invité

Re : freeze incompréhensibles - stretch [resolu]

les erreurs depuis le dernier démarrage


journalctl -r -p err
 


pour la partie graphique


nano /var/log/Xorg.0.log
 


normalement avec la serie nvidia GTX7xx pas de problèmes avec jessie , mais je connais pas la GT720.
peut étre piocher dans les backports de jessie pour avoir des versions plus récentes de paquet.
tu a aussi le driver propriétaire des dépots debian (si c est bien un problème graphique avec nouveau ) .

Dernière modification par anonyme (07-01-2017 12:51:49)

#9 07-01-2017 13:39:43

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

Merci anonyme wink

Je suis sous Stretch, ce n'est pas le pilote le plus récent par rapport aux backports Jessie ?

journalctl -r -p err
-- Logs begin at Sat 2017-01-07 13:33:12 CET, end at Sat 2017-01-07 13:35:01 CET
janv. 07 13:33:13 station bluetoothd[587]: sap-server: Operation not permitted (
janv. 07 13:33:13 station bluetoothd[587]: Sap driver initialization failed.
janv. 07 13:33:13 station bluetoothd[587]: Failed to obtain handles for "Service
janv. 07 13:33:13 station avahi-daemon[626]: chroot.c: open() failed: No such fi
janv. 07 13:33:12 station kernel: nouveau 0000:01:00.0: priv: HUB0: 085014 fffff
lines 1-6/6 (END)...skipping...
-- Logs begin at Sat 2017-01-07 13:33:12 CET, end at Sat 2017-01-07 13:35:01 CET. --
janv. 07 13:33:13 station bluetoothd[587]: sap-server: Operation not permitted (1)
janv. 07 13:33:13 station bluetoothd[587]: Sap driver initialization failed.
janv. 07 13:33:13 station bluetoothd[587]: Failed to obtain handles for "Service Changed" characteristic
janv. 07 13:33:13 station avahi-daemon[626]: chroot.c: open() failed: No such file or directory
janv. 07 13:33:12 station kernel: nouveau 0000:01:00.0: priv: HUB0: 085014 ffffffff (1b70820b)
 



[     2.812]
X.Org X Server 1.19.0
Release Date: 2016-11-15
[     2.812] X Protocol Version 11, Revision 0
[     2.812] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     2.812] Current Operating System: Linux station 4.8.0-2-amd64 #1 SMP Debian 4.8.11-1 (2016-12-02) x86_64
[     2.812] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=8cb1de98-1e8c-4f73-8606-2e80612bbb8a ro quiet splash elevator=noop
[     2.812] Build Date: 16 December 2016  07:30:27PM
[     2.812] xorg-server 2:1.19.0-3 (https://www.debian.org/support)
[     2.812] Current version of pixman: 0.34.0
[     2.812]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     2.812] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.812] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan  7 13:33:13 2017
[     2.815] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     2.816] (==) No Layout section.  Using the first Screen section.
[     2.816] (==) No screen section available. Using defaults.
[     2.816] (**) |-->Screen "Default Screen Section" (0)
[     2.817] (**) |   |-->Monitor "<default monitor>"
[     2.817] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     2.817] (==) Automatically adding devices
[     2.817] (==) Automatically enabling devices
[     2.818] (==) Automatically adding GPU devices
[     2.818] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     2.821] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     2.821]  Entry deleted from font path.
[     2.824] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     2.824] (==) ModulePath set to "/usr/lib/xorg/modules"
[     2.824] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     2.824] (II) Loader magic: 0x558218ba0e00
[     2.824] (II) Module ABI versions:
[     2.824]  X.Org ANSI C Emulation: 0.4
[     2.824]  X.Org Video Driver: 23.0
[     2.824]  X.Org XInput driver : 24.1
[     2.824]  X.Org Server Extension : 10.0
[     2.825] (++) using VT number 7

[     2.825] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     2.825] (II) xfree86: Adding drm device (/dev/dri/card1)
[     4.308] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.309] (--) PCI: (0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xdd000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64
[     4.309] (--) PCI:*(0:1:0:0) 10de:1288:1043:8670 rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     4.309] (II) LoadModule: "glx"
[     4.311] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.320] (II) Module glx: vendor="X.Org Foundation"
[     4.320]  compiled for 1.19.0, module version = 1.0.0
[     4.320]  ABI class: X.Org Server Extension, version 10.0
[     4.320] (==) Matched nouveau as autoconfigured driver 0
[     4.320] (==) Matched nv as autoconfigured driver 1
[     4.320] (==) Matched nouveau as autoconfigured driver 2
[     4.320] (==) Matched nv as autoconfigured driver 3
[     4.320] (==) Matched modesetting as autoconfigured driver 4
[     4.320] (==) Matched fbdev as autoconfigured driver 5
[     4.320] (==) Matched vesa as autoconfigured driver 6
[     4.320] (==) Assigned the driver to the xf86ConfigLayout
[     4.320] (II) LoadModule: "nouveau"
[     4.322] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     4.324] (II) Module nouveau: vendor="X.Org Foundation"
[     4.324]  compiled for 1.19.0, module version = 1.0.13
[     4.324]  Module class: X.Org Video Driver
[     4.324]  ABI class: X.Org Video Driver, version 23.0
[     4.324] (II) LoadModule: "nv"
[     4.324] (WW) Warning, couldn't open module nv
[     4.324] (II) UnloadModule: "nv"
[     4.324] (II) Unloading nv
[     4.324] (EE) Failed to load module "nv" (module does not exist, 0)
[     4.324] (II) LoadModule: "modesetting"
[     4.324] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.325] (II) Module modesetting: vendor="X.Org Foundation"
[     4.325]  compiled for 1.19.0, module version = 1.19.0
[     4.325]  Module class: X.Org Video Driver
[     4.325]  ABI class: X.Org Video Driver, version 23.0
[     4.325] (II) LoadModule: "fbdev"
[     4.325] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.325] (II) Module fbdev: vendor="X.Org Foundation"
[     4.325]  compiled for 1.19.0, module version = 0.4.4
[     4.325]  Module class: X.Org Video Driver
[     4.325]  ABI class: X.Org Video Driver, version 23.0
[     4.325] (II) LoadModule: "vesa"
[     4.325] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.325] (II) Module vesa: vendor="X.Org Foundation"
[     4.325]  compiled for 1.19.0, module version = 2.3.4
[     4.325]  Module class: X.Org Video Driver
[     4.325]  ABI class: X.Org Video Driver, version 23.0
[     4.325] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400
[     4.325] (II) NOUVEAU driver for NVIDIA chipset families :
[     4.325]  RIVA TNT        (NV04)
[     4.325]  RIVA TNT2       (NV05)
[     4.325]  GeForce 256     (NV10)
[     4.325]  GeForce 2       (NV11, NV15)
[     4.325]  GeForce 4MX     (NV17, NV18)
[     4.325]  GeForce 3       (NV20)
[     4.325]  GeForce 4Ti     (NV25, NV28)
[     4.325]  GeForce FX      (NV3x)
[     4.325]  GeForce 6       (NV4x)
[     4.325]  GeForce 7       (G7x)
[     4.325]  GeForce 8       (G8x)
[     4.325]  GeForce GTX 200 (NVA0)
[     4.325]  GeForce GTX 400 (NVC0)
[     4.325] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.325] (II) FBDEV: driver for framebuffer: fbdev
[     4.325] (II) VESA: driver for VESA chipsets: vesa
[     4.327] (II) [drm] nouveau interface version: 1.3.1
[     4.327] (II) modeset(G0): using drv /dev/dri/card0
[     4.327] (WW) Falling back to old probe method for fbdev
[     4.327] (II) Loading sub module "fbdevhw"
[     4.327] (II) LoadModule: "fbdevhw"
[     4.327] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.328] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.328]  compiled for 1.19.0, module version = 0.0.2
[     4.328]  ABI class: X.Org Video Driver, version 23.0
[     4.328] (WW) Falling back to old probe method for vesa
[     4.328] (II) Loading sub module "dri2"
[     4.328] (II) LoadModule: "dri2"
[     4.328] (II) Module "dri2" already built-in
[     4.328] (--) NOUVEAU(0): Chipset: "NVIDIA NV106"
[     4.328] (II) NOUVEAU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     4.328] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[     4.328] (==) NOUVEAU(0): RGB weight 888
[     4.328] (==) NOUVEAU(0): Default visual is TrueColor
[     4.328] (==) NOUVEAU(0): Using HW cursor
[     4.328] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[     4.328] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[     4.328] (==) NOUVEAU(0): Page flipping enabled
[     4.328] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[     4.328] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[     4.328] (II) NOUVEAU(0): Initializing outputs ...
[     4.361] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[     4.362] (II) NOUVEAU(0): Output HDMI-2 has no monitor section
[     4.395] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[     4.395] (II) NOUVEAU(0): 3 crtcs needed for screen.
[     4.412] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[     4.412] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[     4.412] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[     4.412] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[     4.444] (II) NOUVEAU(0): EDID for output DVI-D-1
[     4.444] (II) NOUVEAU(0): Manufacturer: SAM  Model: 10f  Serial#: 1296707897
[     4.444] (II) NOUVEAU(0): Year: 2004  Week: 49
[     4.444] (II) NOUVEAU(0): EDID Version: 1.3
[     4.444] (II) NOUVEAU(0): Digital Display Input
[     4.444] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[     4.444] (II) NOUVEAU(0): Gamma: 2.20
[     4.444] (II) NOUVEAU(0): DPMS capabilities: Off
[     4.444] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     4.444] (II) NOUVEAU(0): First detailed timing is preferred mode
[     4.444] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[     4.444] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[     4.444] (II) NOUVEAU(0): Supported established timings:
[     4.444] (II) NOUVEAU(0): 720x400@70Hz
[     4.444] (II) NOUVEAU(0): 640x480@60Hz
[     4.444] (II) NOUVEAU(0): 640x480@67Hz
[     4.444] (II) NOUVEAU(0): 640x480@72Hz
[     4.444] (II) NOUVEAU(0): 640x480@75Hz
[     4.444] (II) NOUVEAU(0): 800x600@56Hz
[     4.444] (II) NOUVEAU(0): 800x600@60Hz
[     4.444] (II) NOUVEAU(0): 800x600@72Hz
[     4.445] (II) NOUVEAU(0): 800x600@75Hz
[     4.445] (II) NOUVEAU(0): 832x624@75Hz
[     4.445] (II) NOUVEAU(0): 1024x768@60Hz
[     4.445] (II) NOUVEAU(0): 1024x768@70Hz
[     4.445] (II) NOUVEAU(0): 1024x768@75Hz
[     4.445] (II) NOUVEAU(0): 1280x1024@75Hz
[     4.445] (II) NOUVEAU(0): 1152x864@75Hz
[     4.445] (II) NOUVEAU(0): Manufacturer's mask: 0
[     4.445] (II) NOUVEAU(0): Supported standard timings:
[     4.445] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.445] (II) NOUVEAU(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     4.445] (II) NOUVEAU(0): Supported detailed timing:
[     4.445] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[     4.445] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     4.445] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     4.445] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[     4.445] (II) NOUVEAU(0): Monitor name: SyncMaster
[     4.445] (II) NOUVEAU(0): Serial No: HSHXB11543
[     4.445] (II) NOUVEAU(0): EDID (in hex):
[     4.445] (II) NOUVEAU(0):   00ffffffffffff004c2d0f0139314a4d
[     4.445] (II) NOUVEAU(0):   310e010380261e782aee95a3544c9926
[     4.445] (II) NOUVEAU(0):   0f5054bfef808180714f010101010101
[     4.445] (II) NOUVEAU(0):   010101010101302a009851002a403070
[     4.445] (II) NOUVEAU(0):   1300782d1100001e000000fd00384b1e
[     4.445] (II) NOUVEAU(0):   510e000a202020202020000000fc0053
[     4.445] (II) NOUVEAU(0):   796e634d61737465720a2020000000ff
[     4.445] (II) NOUVEAU(0):   00485348584231313534330a20200092
[     4.445] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[     4.445] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.445] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.445] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.446] (II) NOUVEAU(0): EDID for output HDMI-2
[     4.479] (II) NOUVEAU(0): EDID for output VGA-1
[     4.479] (II) NOUVEAU(0): Manufacturer: NEC  Model: 6659  Serial#: 16843009
[     4.479] (II) NOUVEAU(0): Year: 2004  Week: 46
[     4.479] (II) NOUVEAU(0): EDID Version: 1.3
[     4.479] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[     4.479] (II) NOUVEAU(0): Sync:  Separate
[     4.479] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[     4.479] (II) NOUVEAU(0): Gamma: 2.20
[     4.479] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     4.479] (II) NOUVEAU(0): First detailed timing is preferred mode
[     4.479] (II) NOUVEAU(0): redX: 0.640 redY: 0.332   greenX: 0.296 greenY: 0.600
[     4.479] (II) NOUVEAU(0): blueX: 0.144 blueY: 0.091   whiteX: 0.312 whiteY: 0.333
[     4.479] (II) NOUVEAU(0): Supported established timings:
[     4.479] (II) NOUVEAU(0): 720x400@70Hz
[     4.479] (II) NOUVEAU(0): 640x480@60Hz
[     4.479] (II) NOUVEAU(0): 640x480@67Hz
[     4.479] (II) NOUVEAU(0): 640x480@72Hz
[     4.479] (II) NOUVEAU(0): 640x480@75Hz
[     4.479] (II) NOUVEAU(0): 800x600@56Hz
[     4.479] (II) NOUVEAU(0): 800x600@60Hz
[     4.479] (II) NOUVEAU(0): 800x600@72Hz
[     4.479] (II) NOUVEAU(0): 800x600@75Hz
[     4.479] (II) NOUVEAU(0): 832x624@75Hz
[     4.479] (II) NOUVEAU(0): 1024x768@60Hz
[     4.479] (II) NOUVEAU(0): 1024x768@70Hz
[     4.479] (II) NOUVEAU(0): 1024x768@75Hz
[     4.479] (II) NOUVEAU(0): 1280x1024@75Hz
[     4.479] (II) NOUVEAU(0): 1152x864@75Hz
[     4.479] (II) NOUVEAU(0): Manufacturer's mask: 0
[     4.479] (II) NOUVEAU(0): Supported standard timings:
[     4.479] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     4.479] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.479] (II) NOUVEAU(0): Supported detailed timing:
[     4.479] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[     4.479] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     4.479] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     4.479] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[     4.479] (II) NOUVEAU(0): Monitor name: LCD72VM
[     4.479] (II) NOUVEAU(0): Serial No: 4Y149770NB
[     4.479] (II) NOUVEAU(0): EDID (in hex):
[     4.479] (II) NOUVEAU(0):   00ffffffffffff0038a3596601010101
[     4.479] (II) NOUVEAU(0):   2e0e010308221b78eacedda3554b9924
[     4.479] (II) NOUVEAU(0):   174f55bfef80714f8180010101010101
[     4.479] (II) NOUVEAU(0):   010101010101302a009851002a403070
[     4.479] (II) NOUVEAU(0):   1300520e1100001e000000fd00384b1f
[     4.479] (II) NOUVEAU(0):   510e000a202020202020000000fc004c
[     4.479] (II) NOUVEAU(0):   43443732564d0a2020202020000000ff
[     4.479] (II) NOUVEAU(0):   0034593134393737304e420a20200042
[     4.479] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[     4.479] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.479] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.479] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.479] (II) NOUVEAU(0): Output DVI-D-1 connected
[     4.479] (II) NOUVEAU(0): Output HDMI-2 disconnected
[     4.479] (II) NOUVEAU(0): Output VGA-1 connected
[     4.479] (II) NOUVEAU(0): Using spanning desktop for initial modes
[     4.479] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1280x1024 +0+0
[     4.479] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024 +1280+0
[     4.479] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.479] (--) NOUVEAU(0): Virtual size is 2560x1024 (pitch 0)
[     4.479] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[     4.479] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.479] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[     4.479] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[     4.479] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[     4.479] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[     4.479] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[     4.479] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[     4.479] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[     4.479] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[     4.479] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.479] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[     4.479] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.479] (==) NOUVEAU(0): DPI set to (96, 96)
[     4.479] (II) Loading sub module "fb"
[     4.479] (II) LoadModule: "fb"
[     4.479] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.480] (II) Module fb: vendor="X.Org Foundation"
[     4.480]  compiled for 1.19.0, module version = 1.0.0
[     4.480]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.480] (II) Loading sub module "shadowfb"
[     4.480] (II) LoadModule: "shadowfb"
[     4.480] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[     4.480] (II) Module shadowfb: vendor="X.Org Foundation"
[     4.480]  compiled for 1.19.0, module version = 1.0.0
[     4.480]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.480] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[     4.480] (==) modeset(G0): RGB weight 888
[     4.480] (==) modeset(G0): Default visual is TrueColor
[     4.480] (II) Loading sub module "glamoregl"
[     4.480] (II) LoadModule: "glamoregl"
[     4.480] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     4.486] (II) Module glamoregl: vendor="X.Org Foundation"
[     4.486]  compiled for 1.19.0, module version = 1.0.0
[     4.486]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.486] (II) glamor: OpenGL accelerated X.org driver based.
[     4.506] (II) glamor: EGL version 1.4 (DRI2):
[     4.513] (II) modeset(G0): glamor initialized
[     4.515] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[     4.518] (II) modeset(G0): Output DP-1-1 has no monitor section
[     4.520] (II) modeset(G0): EDID for output HDMI-1-1
[     4.522] (II) modeset(G0): EDID for output DP-1-1
[     4.522] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[     4.522] (==) modeset(G0): DPI set to (96, 96)
[     4.522] (II) Loading sub module "fb"
[     4.522] (II) LoadModule: "fb"
[     4.523] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.523] (II) Module fb: vendor="X.Org Foundation"
[     4.523]  compiled for 1.19.0, module version = 1.0.0
[     4.523]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.523] (II) UnloadModule: "fbdev"
[     4.523] (II) Unloading fbdev
[     4.523] (II) UnloadSubModule: "fbdevhw"
[     4.523] (II) Unloading fbdevhw
[     4.523] (II) UnloadModule: "vesa"
[     4.523] (II) Unloading vesa
[     4.523] (--) Depth 24 pixmap format is 32 bpp
[     4.594] (==) modeset(G0): Backing store enabled
[     4.594] (==) modeset(G0): Silken mouse enabled
[     4.594] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.595] (==) modeset(G0): DPMS enabled
[     4.595] (II) modeset(G0): [DRI2] Setup complete
[     4.595] (II) modeset(G0): [DRI2]   DRI driver: i965
[     4.595] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[     4.615] (II) NOUVEAU(0): Channel setup complete.
[     4.635] (II) NOUVEAU(0): [COPY] async initialised.
[     4.635] (II) NOUVEAU(0): Hardware support for Present enabled
[     4.635] (II) NOUVEAU(0): [DRI2] Setup complete
[     4.635] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[     4.635] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[     4.635] (II) Loading sub module "exa"
[     4.635] (II) LoadModule: "exa"
[     4.635] (II) Loading /usr/lib/xorg/modules/libexa.so
[     4.636] (II) Module exa: vendor="X.Org Foundation"
[     4.636]  compiled for 1.19.0, module version = 2.6.0
[     4.636]  ABI class: X.Org Video Driver, version 23.0
[     4.636] (II) EXA(0): Driver allocated offscreen pixmaps
[     4.636] (II) EXA(0): Driver registered support for the following operations:
[     4.636] (II)         Solid
[     4.636] (II)         Copy
[     4.636] (II)         Composite (RENDER acceleration)
[     4.636] (II)         UploadToScreen
[     4.636] (II)         DownloadFromScreen
[     4.636] (==) NOUVEAU(0): Backing store enabled
[     4.636] (==) NOUVEAU(0): Silken mouse enabled
[     4.636] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[     4.636] (II) NOUVEAU(0): [XvMC] Extension initialized.
[     4.636] (==) NOUVEAU(0): DPMS enabled
[     4.636] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.636] (--) RandR disabled
[     4.638] (II) SELinux: Disabled on system
[     4.762] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     4.762] (II) AIGLX: enabled GLX_ARB_create_context
[     4.762] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     4.762] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     4.762] (II) AIGLX: enabled GLX_INTEL_swap_event
[     4.762] (II) AIGLX: enabled GLX_SGI_swap_control
[     4.762] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     4.762] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     4.762] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     4.762] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     4.763] (II) AIGLX: Loaded and initialized nouveau
[     4.763] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.767] (II) modeset(G0): Damage tracking initialized
[     4.769] (II) NOUVEAU(0): NVEnterVT is called.
[     4.806] (II) NOUVEAU(0): Setting screen physical size to 677 x 270
[     4.806] resize called 2560 1024
[     4.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.837] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.837] (II) LoadModule: "libinput"
[     4.837] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.840] (II) Module libinput: vendor="X.Org Foundation"
[     4.840]  compiled for 1.19.0, module version = 0.23.0
[     4.840]  Module class: X.Org XInput Driver
[     4.840]  ABI class: X.Org XInput driver, version 24.1
[     4.840] (II) Using input driver 'libinput' for 'Power Button'
[     4.840] (**) Power Button: always reports core events
[     4.840] (**) Option "Device" "/dev/input/event4"
[     4.840] (**) Option "_source" "server/udev"
[     4.840] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[     4.840] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[     4.864] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4"
[     4.864] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.864] (**) Option "xkb_model" "pc105"
[     4.864] (**) Option "xkb_layout" "fr"
[     4.864] (**) Option "xkb_variant" "latin9"
[     4.885] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[     4.885] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[     4.885] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     4.885] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     4.885] (II) Using input driver 'libinput' for 'Video Bus'
[     4.885] (**) Video Bus: always reports core events
[     4.885] (**) Option "Device" "/dev/input/event5"
[     4.885] (**) Option "_source" "server/udev"
[     4.885] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     4.885] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     4.904] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event5"
[     4.904] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.904] (**) Option "xkb_model" "pc105"
[     4.904] (**) Option "xkb_layout" "fr"
[     4.904] (**) Option "xkb_variant" "latin9"
[     4.904] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     4.904] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     4.905] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     4.905] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.905] (II) Using input driver 'libinput' for 'Power Button'
[     4.905] (**) Power Button: always reports core events
[     4.905] (**) Option "Device" "/dev/input/event3"
[     4.905] (**) Option "_source" "server/udev"
[     4.905] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     4.905] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     4.924] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event3"
[     4.924] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     4.924] (**) Option "xkb_model" "pc105"
[     4.924] (**) Option "xkb_layout" "fr"
[     4.924] (**) Option "xkb_variant" "latin9"
[     4.924] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     4.924] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     4.925] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     4.925] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.925] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.925] (**) Sleep Button: always reports core events
[     4.925] (**) Option "Device" "/dev/input/event2"
[     4.925] (**) Option "_source" "server/udev"
[     4.925] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.925] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     4.940] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event2"
[     4.940] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     4.940] (**) Option "xkb_model" "pc105"
[     4.940] (**) Option "xkb_layout" "fr"
[     4.940] (**) Option "xkb_variant" "latin9"
[     4.940] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.940] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     4.941] (II) config/udev: Adding input device G-Tech Wireless Dongle (/dev/input/event0)
[     4.941] (**) G-Tech Wireless Dongle: Applying InputClass "libinput keyboard catchall"
[     4.941] (II) Using input driver 'libinput' for 'G-Tech Wireless Dongle'
[     4.941] (**) G-Tech Wireless Dongle: always reports core events
[     4.941] (**) Option "Device" "/dev/input/event0"
[     4.941] (**) Option "_source" "server/udev"
[     4.942] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is tagged by udev as: Keyboard
[     4.942] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is a keyboard
[     4.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A81:1004.0001/input/input3/event0"
[     4.968] (II) XINPUT: Adding extended input device "G-Tech Wireless Dongle" (type: KEYBOARD, id 10)
[     4.968] (**) Option "xkb_model" "pc105"
[     4.968] (**) Option "xkb_layout" "fr"
[     4.968] (**) Option "xkb_variant" "latin9"
[     4.968] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is tagged by udev as: Keyboard
[     4.968] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is a keyboard
[     4.969] (II) config/udev: Adding input device G-Tech Wireless Dongle (/dev/input/event1)
[     4.969] (**) G-Tech Wireless Dongle: Applying InputClass "libinput pointer catchall"
[     4.969] (**) G-Tech Wireless Dongle: Applying InputClass "libinput keyboard catchall"
[     4.969] (II) Using input driver 'libinput' for 'G-Tech Wireless Dongle'
[     4.969] (**) G-Tech Wireless Dongle: always reports core events
[     4.969] (**) Option "Device" "/dev/input/event1"
[     4.969] (**) Option "_source" "server/udev"
[     4.969] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[     4.969] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a pointer caps
[     4.969] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a keyboard
[     5.008] (II) libinput: G-Tech Wireless Dongle: needs a virtual subdevice
[     5.008] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1A81:1004.0002/input/input4/event1"
[     5.008] (II) XINPUT: Adding extended input device "G-Tech Wireless Dongle" (type: MOUSE, id 11)
[     5.008] (**) Option "AccelerationScheme" "none"
[     5.008] (**) G-Tech Wireless Dongle: (accel) selected scheme none/0
[     5.008] (**) G-Tech Wireless Dongle: (accel) acceleration factor: 2.000
[     5.008] (**) G-Tech Wireless Dongle: (accel) acceleration threshold: 4
[     5.008] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[     5.008] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a pointer caps
[     5.008] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a keyboard
[     5.008] (II) config/udev: Adding input device G-Tech Wireless Dongle (/dev/input/mouse0)
[     5.008] (II) No input driver specified, ignoring this device.
[     5.008] (II) This device may have been added with another device file.
[     5.009] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[     5.009] (II) No input driver specified, ignoring this device.
[     5.009] (II) This device may have been added with another device file.
[     5.009] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[     5.009] (II) No input driver specified, ignoring this device.
[     5.009] (II) This device may have been added with another device file.
[     5.009] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[     5.009] (II) No input driver specified, ignoring this device.
[     5.009] (II) This device may have been added with another device file.
[     5.009] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[     5.009] (II) No input driver specified, ignoring this device.
[     5.009] (II) This device may have been added with another device file.
[     5.009] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[     5.009] (II) No input driver specified, ignoring this device.
[     5.009] (II) This device may have been added with another device file.
[     5.009] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)
[     5.009] (II) No input driver specified, ignoring this device.
[     5.010] (II) This device may have been added with another device file.
[     5.010] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event15)
[     5.010] (II) No input driver specified, ignoring this device.
[     5.010] (II) This device may have been added with another device file.
[     5.010] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[     5.010] (II) No input driver specified, ignoring this device.
[     5.010] (II) This device may have been added with another device file.
[     5.010] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[     5.010] (II) No input driver specified, ignoring this device.
[     5.010] (II) This device may have been added with another device file.
[     5.010] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[     5.010] (II) No input driver specified, ignoring this device.
[     5.010] (II) This device may have been added with another device file.
[     5.010] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[     5.010] (II) No input driver specified, ignoring this device.
[     5.010] (II) This device may have been added with another device file.
[     5.011] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[     5.011] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.011] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     5.011] (**) Eee PC WMI hotkeys: always reports core events
[     5.011] (**) Option "Device" "/dev/input/event7"
[     5.011] (**) Option "_source" "server/udev"
[     5.011] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[     5.011] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is a keyboard
[     5.028] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[     5.028] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[     5.028] (**) Option "xkb_model" "pc105"
[     5.028] (**) Option "xkb_layout" "fr"
[     5.028] (**) Option "xkb_variant" "latin9"
[     5.028] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[     5.028] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is a keyboard
[     5.028] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     5.028] (II) No input driver specified, ignoring this device.
[     5.028] (II) This device may have been added with another device file.
[     5.028] (II) config/udev: Adding input device lircd-uinput (/dev/input/event8)
[     5.028] (**) lircd-uinput: Applying InputClass "libinput keyboard catchall"
[     5.028] (II) Using input driver 'libinput' for 'lircd-uinput'
[     5.028] (**) lircd-uinput: always reports core events
[     5.028] (**) Option "Device" "/dev/input/event8"
[     5.028] (**) Option "_source" "server/udev"
[     5.029] (II) input device 'lircd-uinput', /dev/input/event8 is tagged by udev as: Keyboard
[     5.029] (II) input device 'lircd-uinput', /dev/input/event8 is a keyboard
[     5.068] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event8"
[     5.068] (II) XINPUT: Adding extended input device "lircd-uinput" (type: KEYBOARD, id 13)
[     5.068] (**) Option "xkb_model" "pc105"
[     5.068] (**) Option "xkb_layout" "fr"
[     5.068] (**) Option "xkb_variant" "latin9"
[     5.068] (II) input device 'lircd-uinput', /dev/input/event8 is tagged by udev as: Keyboard
[     5.068] (II) input device 'lircd-uinput', /dev/input/event8 is a keyboard
[     5.071] (**) G-Tech Wireless Dongle: Applying InputClass "libinput pointer catchall"
[     5.071] (**) G-Tech Wireless Dongle: Applying InputClass "libinput keyboard catchall"
[     5.071] (II) Using input driver 'libinput' for 'G-Tech Wireless Dongle'
[     5.071] (**) G-Tech Wireless Dongle: always reports core events
[     5.071] (**) Option "Device" "/dev/input/event1"
[     5.071] (**) Option "_source" "_driver/libinput"
[     5.071] (II) libinput: G-Tech Wireless Dongle: is a virtual subdevice
[     5.071] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1A81:1004.0002/input/input4/event1"
[     5.071] (II) XINPUT: Adding extended input device "G-Tech Wireless Dongle" (type: KEYBOARD, id 14)
[     5.071] (**) Option "xkb_model" "pc105"
[     5.071] (**) Option "xkb_layout" "fr"
[     5.071] (**) Option "xkb_variant" "latin9"
[     5.072] (II) config/udev: removing device lircd-uinput
[     5.120] (II) UnloadModule: "libinput"
[     5.120] (II) config/udev: Adding input device lircd-uinput (/dev/input/event8)
[     5.120] (**) lircd-uinput: Applying InputClass "libinput keyboard catchall"
[     5.120] (II) Using input driver 'libinput' for 'lircd-uinput'
[     5.120] (**) lircd-uinput: always reports core events
[     5.120] (**) Option "Device" "/dev/input/event8"
[     5.120] (**) Option "_source" "server/udev"
[     5.120] (II) input device 'lircd-uinput', /dev/input/event8 is tagged by udev as: Keyboard
[     5.120] (II) input device 'lircd-uinput', /dev/input/event8 is a keyboard
[     5.152] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event8"
[     5.152] (II) XINPUT: Adding extended input device "lircd-uinput" (type: KEYBOARD, id 13)
[     5.152] (**) Option "xkb_model" "pc105"
[     5.152] (**) Option "xkb_layout" "fr"
[     5.152] (**) Option "xkb_variant" "latin9"
[     5.152] (WW) Option "xkb_options" requires a string value
[     5.152] (II) input device 'lircd-uinput', /dev/input/event8 is tagged by udev as: Keyboard
[     5.152] (II) input device 'lircd-uinput', /dev/input/event8 is a keyboard
[     5.152] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[     5.152] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[     5.152] failed to find screen to remove
[     5.153] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[     5.153] (II) No input driver specified, ignoring this device.
[     5.153] (II) This device may have been added with another device file.
[     5.154] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[     5.154] (II) No input driver specified, ignoring this device.
[     5.154] (II) This device may have been added with another device file.
[     5.154] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[     5.154] (II) No input driver specified, ignoring this device.
[     5.154] (II) This device may have been added with another device file.
[     5.154] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event18)
[     5.154] (II) No input driver specified, ignoring this device.
[     5.154] (II) This device may have been added with another device file.
[     5.154] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[     5.154] (II) No input driver specified, ignoring this device.
[     5.154] (II) This device may have been added with another device file.
[     5.154] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[     5.154] (II) No input driver specified, ignoring this device.
[     5.154] (II) This device may have been added with another device file.
[     5.155] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event19)
[     5.155] (II) No input driver specified, ignoring this device.
[     5.155] (II) This device may have been added with another device file.
[     5.155] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[     5.155] (II) No input driver specified, ignoring this device.
[     5.155] (II) This device may have been added with another device file.
[     5.155] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event15)
[     5.155] (II) No input driver specified, ignoring this device.
[     5.155] (II) This device may have been added with another device file.
[     5.155] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)
[     5.155] (II) No input driver specified, ignoring this device.
[     5.155] (II) This device may have been added with another device file.
[     5.155] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[     5.155] (II) No input driver specified, ignoring this device.
[     5.155] (II) This device may have been added with another device file.
[     5.156] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event21)
[     5.156] (II) No input driver specified, ignoring this device.
[     5.156] (II) This device may have been added with another device file.
[     5.156] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event20)
[     5.156] (II) No input driver specified, ignoring this device.
[     5.156] (II) This device may have been added with another device file.
[    13.863] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.863] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    13.863] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    13.863] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.863] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.863] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.863] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.864] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.864] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.864] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    14.110] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    14.110] (II) NOUVEAU(0): Using hsync ranges from config file
[    14.110] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    14.110] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    14.110] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    14.110] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    14.110] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    14.183] resize called 2560 1024
[    14.286] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    14.286] (II) NOUVEAU(0): Using hsync ranges from config file
[    14.286] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    14.286] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    14.286] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    14.286] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    14.286] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    14.352] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    14.352] (II) NOUVEAU(0): Using hsync ranges from config file
[    14.352] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    14.352] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    14.352] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    14.352] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    14.352] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    14.420] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    14.420] (II) NOUVEAU(0): Using hsync ranges from config file
[    14.420] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    14.420] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    14.420] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    14.420] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    14.420] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 

Hors ligne

#10 07-01-2017 15:04:39

mksmn
Membre
Lieu : Ile de France
Distrib. : Debian GNU/Linux Stable (Bookworm)
Noyau : Noyau Linux 6.1.0-xx-amd64
(G)UI : Xfce Desktop 4.18
Inscription : 30-06-2008

Re : freeze incompréhensibles - stretch [resolu]

salut,

oui les pilotes sous stretch sont plus récents, mais comme ton info distri n'est manifestement plus à jour, c'est la raison pour laquelle on te parle de jessie et des backports.

Debian, c'est bien!
(De retour sous Debian, soyez cool.)

Hors ligne

#11 07-01-2017 16:49:12

anonyme
Invité

Re : freeze incompréhensibles - stretch [resolu]

ce que je comprends pas c'est pourquoi le gpu intel est actif ?
tu utilise 2 écrans d' après ton log ?

la mise en place de la carte nvidia dans le slot PCIe devrait désactiver le gpu intel intégré , peut etre voir dans le bios si il n est pas possible de forcer la désactivation .

sinon je ne vois rien qui explique ces blocages (a part la présence des 2 gpu )
tes 2 écrans sont connectés sur la carte nvidia ?

nota: met a jour ton profil avec stretch et noyau 4.8.0-2

Nota: j'ai repris ton premier post , et tu a bien un ordinateur de bureau avec un gpu intégré intel ou tu a voulu faire un upgrade avec une carte discrète nvidia GT720
les connecteurs vidéo de la carte mere ne devrait plus etre utilisé , que ceux de ta carte Nvidia .

il y a ceci :


janv. 07 13:33:12 station kernel: nouveau 0000:01:00.0: priv: HUB0: 085014 fffff
lines 1-6/6 (END)...skipping...
 


cela me semble informatif  roll

et pour ceci :


janv. 07 13:33:13 station bluetoothd[587]: sap-server: Operation not permitted (
janv. 07 13:33:13 station bluetoothd[587]: Sap driver initialization failed.
janv. 07 13:33:13 station bluetoothd[587]: Failed to obtain handles for "Service
 


il doit y avoir moyen d enlever ce message , le bluetooh pas trop mon truc , j ai aucune machine équipé .

PS: de mémoire il me semble que tu veut éviter d utiliser un driver non-free pour ta carte nvidia ?

Dernière modification par anonyme (07-01-2017 17:04:18)

#12 07-01-2017 20:00:04

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

profil mis à jour (mais j'ai encore du Jessie dans la maison tongue )

la carte vidéo était à l'origine dans la machine

dans le bios, le choix était en automatique pour la carte graphique, j'ai imposé la carte PCI-E sur laquelle mes deux écrans ont toujours été connectés

concernant le pilote, je veux utiliser celui qui fonctionne big_smile

pour le bluetooth, il est pourtant fonctionnel neutral

j'attends le prochain freeze pour rapporter les nouveau logs ?

merci pour vos coups de main cool

Dernière modification par totophe56 (07-01-2017 20:01:04)

Hors ligne

#13 08-01-2017 11:34:48

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

on serait bien en train d'essayer de me pirater roll
j'ai mis permitroologin à no en attendant de finir de configurer mon serveur ssh

journalctl -r -p err


-- Logs begin at Sun 2017-01-08 10:44:09 CET, end at Sun 2017-01-08 11:27:13 CET. --
janv. 08 11:13:44 station sshd[1673]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:13:44 station sshd[1673]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 16800 ss
janv. 08 11:10:17 station sshd[1646]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:10:17 station sshd[1646]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 53547 ss
janv. 08 11:09:35 station sshd[1637]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:09:35 station sshd[1637]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 59855 ss
janv. 08 11:09:10 station sshd[1584]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:09:10 station sshd[1584]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 26930 ss
janv. 08 11:08:46 station sshd[1578]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:08:46 station sshd[1578]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 56185 ss
janv. 08 11:08:22 station sshd[1571]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:08:22 station sshd[1571]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 7138 ssh
janv. 08 11:07:48 station sshd[1567]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:07:48 station sshd[1567]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 40990 ss
janv. 08 11:07:26 station sshd[1564]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:07:26 station sshd[1564]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 4934 ssh
janv. 08 11:07:01 station sshd[1560]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:07:01 station sshd[1560]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 37739 ss
janv. 08 11:06:38 station sshd[1556]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:06:38 station sshd[1556]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 64758 ss
janv. 08 11:06:12 station sshd[1551]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:06:12 station sshd[1551]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 22804 ss
janv. 08 11:05:42 station sshd[1543]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:05:42 station sshd[1543]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 55605 ss
janv. 08 11:01:03 station sshd[1502]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:01:03 station sshd[1502]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 48546 ss
janv. 08 11:00:42 station sshd[1500]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:00:42 station sshd[1500]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 4245 ssh
janv. 08 11:00:11 station sshd[1494]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 11:00:11 station sshd[1494]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 36904 ss
janv. 08 10:59:49 station sshd[1489]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:59:49 station sshd[1489]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 1868 ssh
janv. 08 10:59:24 station sshd[1480]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:59:24 station sshd[1480]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 34808 ss
janv. 08 10:59:00 station sshd[1476]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:59:00 station sshd[1476]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 61590 ss
janv. 08 10:58:33 station sshd[1474]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:58:33 station sshd[1474]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 27967 ss
janv. 08 10:58:09 station sshd[1469]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:58:09 station sshd[1469]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 60207 ss
janv. 08 10:57:46 station sshd[1465]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:57:46 station sshd[1465]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 25750 ss
janv. 08 10:57:21 station sshd[1460]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:57:21 station sshd[1460]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 56840 ss
janv. 08 10:56:58 station sshd[1456]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:56:58 station sshd[1456]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 23032 ss
janv. 08 10:50:24 station sshd[1405]: PAM service(sshd) ignoring max retries; 6 > 3
janv. 08 10:50:24 station sshd[1405]: error: maximum authentication attempts exceeded for root from 218.65.30.30 port 52383 ss
janv. 08 10:49:58 station sshd[1401]: PAM service(sshd) ignoring max retries; 6 > 3


le Xorg.0.log

[     2.939]
X.Org X Server 1.19.0
Release Date: 2016-11-15
[     2.940] X Protocol Version 11, Revision 0
[     2.940] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     2.940] Current Operating System: Linux station 4.8.0-2-amd64 #1 SMP Debian 4.8.11-1 (2016-12-02) x86_64
[     2.940] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=8cb1de98-1e8c-4f73-8606-2e80612bbb8a ro quiet splash elevator=noop
[     2.940] Build Date: 16 December 2016  07:30:27PM
[     2.940] xorg-server 2:1.19.0-3 (https://www.debian.org/support)
[     2.940] Current version of pixman: 0.34.0
[     2.940]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     2.940] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.940] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan  8 10:44:10 2017
[     2.941] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     2.942] (==) No Layout section.  Using the first Screen section.
[     2.942] (==) No screen section available. Using defaults.
[     2.942] (**) |-->Screen "Default Screen Section" (0)
[     2.942] (**) |   |-->Monitor "<default monitor>"
[     2.943] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     2.943] (==) Automatically adding devices
[     2.943] (==) Automatically enabling devices
[     2.943] (==) Automatically adding GPU devices
[     2.943] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     2.946] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     2.946]  Entry deleted from font path.
[     2.952] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     2.952] (==) ModulePath set to "/usr/lib/xorg/modules"
[     2.952] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     2.952] (II) Loader magic: 0x563595998e00
[     2.952] (II) Module ABI versions:
[     2.952]  X.Org ANSI C Emulation: 0.4
[     2.952]  X.Org Video Driver: 23.0
[     2.952]  X.Org XInput driver : 24.1
[     2.952]  X.Org Server Extension : 10.0
[     2.953] (++) using VT number 7

[     2.953] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     2.953] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.181] (--) PCI:*(0:1:0:0) 10de:1288:1043:8670 rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     4.181] (II) LoadModule: "glx"
[     4.182] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.187] (II) Module glx: vendor="X.Org Foundation"
[     4.187]  compiled for 1.19.0, module version = 1.0.0
[     4.187]  ABI class: X.Org Server Extension, version 10.0
[     4.187] (==) Matched nouveau as autoconfigured driver 0
[     4.187] (==) Matched nv as autoconfigured driver 1
[     4.187] (==) Matched nouveau as autoconfigured driver 2
[     4.187] (==) Matched nv as autoconfigured driver 3
[     4.187] (==) Matched modesetting as autoconfigured driver 4
[     4.187] (==) Matched fbdev as autoconfigured driver 5
[     4.187] (==) Matched vesa as autoconfigured driver 6
[     4.187] (==) Assigned the driver to the xf86ConfigLayout
[     4.187] (II) LoadModule: "nouveau"
[     4.189] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     4.190] (II) Module nouveau: vendor="X.Org Foundation"
[     4.190]  compiled for 1.19.0, module version = 1.0.13
[     4.190]  Module class: X.Org Video Driver
[     4.190]  ABI class: X.Org Video Driver, version 23.0
[     4.190] (II) LoadModule: "nv"
[     4.190] (WW) Warning, couldn't open module nv
[     4.190] (II) UnloadModule: "nv"
[     4.190] (II) Unloading nv
[     4.190] (EE) Failed to load module "nv" (module does not exist, 0)
[     4.190] (II) LoadModule: "modesetting"
[     4.190] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.190] (II) Module modesetting: vendor="X.Org Foundation"
[     4.190]  compiled for 1.19.0, module version = 1.19.0
[     4.190]  Module class: X.Org Video Driver
[     4.190]  ABI class: X.Org Video Driver, version 23.0
[     4.190] (II) LoadModule: "fbdev"
[     4.190] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.191] (II) Module fbdev: vendor="X.Org Foundation"
[     4.191]  compiled for 1.19.0, module version = 0.4.4
[     4.191]  Module class: X.Org Video Driver
[     4.191]  ABI class: X.Org Video Driver, version 23.0
[     4.191] (II) LoadModule: "vesa"
[     4.191] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.191] (II) Module vesa: vendor="X.Org Foundation"
[     4.191]  compiled for 1.19.0, module version = 2.3.4
[     4.191]  Module class: X.Org Video Driver
[     4.191]  ABI class: X.Org Video Driver, version 23.0
[     4.191] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400
[     4.191] (II) NOUVEAU driver for NVIDIA chipset families :
[     4.191]  RIVA TNT        (NV04)
[     4.191]  RIVA TNT2       (NV05)
[     4.191]  GeForce 256     (NV10)
[     4.191]  GeForce 2       (NV11, NV15)
[     4.191]  GeForce 4MX     (NV17, NV18)
[     4.191]  GeForce 3       (NV20)
[     4.191]  GeForce 4Ti     (NV25, NV28)
[     4.191]  GeForce FX      (NV3x)
[     4.191]  GeForce 6       (NV4x)
[     4.191]  GeForce 7       (G7x)
[     4.191]  GeForce 8       (G8x)
[     4.191]  GeForce GTX 200 (NVA0)
[     4.191]  GeForce GTX 400 (NVC0)
[     4.191] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.191] (II) FBDEV: driver for framebuffer: fbdev
[     4.191] (II) VESA: driver for VESA chipsets: vesa
[     4.193] (II) [drm] nouveau interface version: 1.3.1
[     4.193] (WW) Falling back to old probe method for modesetting
[     4.193] (WW) Falling back to old probe method for fbdev
[     4.193] (II) Loading sub module "fbdevhw"
[     4.193] (II) LoadModule: "fbdevhw"
[     4.193] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.193] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.193]  compiled for 1.19.0, module version = 0.0.2
[     4.193]  ABI class: X.Org Video Driver, version 23.0
[     4.193] (WW) Falling back to old probe method for vesa
[     4.193] (II) Loading sub module "dri2"
[     4.193] (II) LoadModule: "dri2"
[     4.193] (II) Module "dri2" already built-in
[     4.193] (--) NOUVEAU(0): Chipset: "NVIDIA NV106"
[     4.193] (II) NOUVEAU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     4.193] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[     4.193] (==) NOUVEAU(0): RGB weight 888
[     4.193] (==) NOUVEAU(0): Default visual is TrueColor
[     4.193] (==) NOUVEAU(0): Using HW cursor
[     4.193] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[     4.193] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[     4.193] (==) NOUVEAU(0): Page flipping enabled
[     4.193] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[     4.193] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[     4.193] (II) NOUVEAU(0): Initializing outputs ...
[     4.226] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[     4.227] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[     4.259] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[     4.259] (II) NOUVEAU(0): 3 crtcs needed for screen.
[     4.276] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[     4.276] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[     4.276] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[     4.276] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[     4.309] (II) NOUVEAU(0): EDID for output DVI-D-1
[     4.309] (II) NOUVEAU(0): Manufacturer: SAM  Model: 10f  Serial#: 1296707897
[     4.309] (II) NOUVEAU(0): Year: 2004  Week: 49
[     4.309] (II) NOUVEAU(0): EDID Version: 1.3
[     4.309] (II) NOUVEAU(0): Digital Display Input
[     4.309] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[     4.309] (II) NOUVEAU(0): Gamma: 2.20
[     4.309] (II) NOUVEAU(0): DPMS capabilities: Off
[     4.309] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     4.309] (II) NOUVEAU(0): First detailed timing is preferred mode
[     4.309] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[     4.309] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[     4.309] (II) NOUVEAU(0): Supported established timings:
[     4.309] (II) NOUVEAU(0): 720x400@70Hz
[     4.309] (II) NOUVEAU(0): 640x480@60Hz
[     4.309] (II) NOUVEAU(0): 640x480@67Hz
[     4.309] (II) NOUVEAU(0): 640x480@72Hz
[     4.309] (II) NOUVEAU(0): 640x480@75Hz
[     4.309] (II) NOUVEAU(0): 800x600@56Hz
[     4.309] (II) NOUVEAU(0): 800x600@60Hz
[     4.309] (II) NOUVEAU(0): 800x600@72Hz
[     4.309] (II) NOUVEAU(0): 800x600@75Hz
[     4.309] (II) NOUVEAU(0): 832x624@75Hz
[     4.309] (II) NOUVEAU(0): 1024x768@60Hz
[     4.309] (II) NOUVEAU(0): 1024x768@70Hz
[     4.309] (II) NOUVEAU(0): 1024x768@75Hz
[     4.309] (II) NOUVEAU(0): 1280x1024@75Hz
[     4.309] (II) NOUVEAU(0): 1152x864@75Hz
[     4.309] (II) NOUVEAU(0): Manufacturer's mask: 0
[     4.309] (II) NOUVEAU(0): Supported standard timings:
[     4.309] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.309] (II) NOUVEAU(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     4.309] (II) NOUVEAU(0): Supported detailed timing:
[     4.309] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[     4.309] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     4.309] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     4.309] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[     4.309] (II) NOUVEAU(0): Monitor name: SyncMaster
[     4.309] (II) NOUVEAU(0): Serial No: HSHXB11543
[     4.309] (II) NOUVEAU(0): EDID (in hex):
[     4.309] (II) NOUVEAU(0):   00ffffffffffff004c2d0f0139314a4d
[     4.309] (II) NOUVEAU(0):   310e010380261e782aee95a3544c9926
[     4.309] (II) NOUVEAU(0):   0f5054bfef808180714f010101010101
[     4.309] (II) NOUVEAU(0):   010101010101302a009851002a403070
[     4.309] (II) NOUVEAU(0):   1300782d1100001e000000fd00384b1e
[     4.309] (II) NOUVEAU(0):   510e000a202020202020000000fc0053
[     4.309] (II) NOUVEAU(0):   796e634d61737465720a2020000000ff
[     4.309] (II) NOUVEAU(0):   00485348584231313534330a20200092
[     4.309] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[     4.309] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.309] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.309] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.310] (II) NOUVEAU(0): EDID for output HDMI-1
[     4.343] (II) NOUVEAU(0): EDID for output VGA-1
[     4.343] (II) NOUVEAU(0): Manufacturer: NEC  Model: 6659  Serial#: 16843009
[     4.343] (II) NOUVEAU(0): Year: 2004  Week: 46
[     4.343] (II) NOUVEAU(0): EDID Version: 1.3
[     4.343] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[     4.343] (II) NOUVEAU(0): Sync:  Separate
[     4.343] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[     4.343] (II) NOUVEAU(0): Gamma: 2.20
[     4.343] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     4.343] (II) NOUVEAU(0): First detailed timing is preferred mode
[     4.343] (II) NOUVEAU(0): redX: 0.640 redY: 0.332   greenX: 0.296 greenY: 0.600
[     4.343] (II) NOUVEAU(0): blueX: 0.144 blueY: 0.091   whiteX: 0.312 whiteY: 0.333
[     4.343] (II) NOUVEAU(0): Supported established timings:
[     4.343] (II) NOUVEAU(0): 720x400@70Hz
[     4.343] (II) NOUVEAU(0): 640x480@60Hz
[     4.343] (II) NOUVEAU(0): 640x480@67Hz
[     4.343] (II) NOUVEAU(0): 640x480@72Hz
[     4.343] (II) NOUVEAU(0): 640x480@75Hz
[     4.343] (II) NOUVEAU(0): 800x600@56Hz
[     4.343] (II) NOUVEAU(0): 800x600@60Hz
[     4.343] (II) NOUVEAU(0): 800x600@72Hz
[     4.343] (II) NOUVEAU(0): 800x600@75Hz
[     4.343] (II) NOUVEAU(0): 832x624@75Hz
[     4.343] (II) NOUVEAU(0): 1024x768@60Hz
[     4.343] (II) NOUVEAU(0): 1024x768@70Hz
[     4.343] (II) NOUVEAU(0): 1024x768@75Hz
[     4.343] (II) NOUVEAU(0): 1280x1024@75Hz
[     4.343] (II) NOUVEAU(0): 1152x864@75Hz
[     4.343] (II) NOUVEAU(0): Manufacturer's mask: 0
[     4.343] (II) NOUVEAU(0): Supported standard timings:
[     4.343] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     4.343] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.343] (II) NOUVEAU(0): Supported detailed timing:
[     4.343] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[     4.343] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     4.343] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     4.343] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[     4.343] (II) NOUVEAU(0): Monitor name: LCD72VM
[     4.343] (II) NOUVEAU(0): Serial No: 4Y149770NB
[     4.343] (II) NOUVEAU(0): EDID (in hex):
[     4.343] (II) NOUVEAU(0):   00ffffffffffff0038a3596601010101
[     4.343] (II) NOUVEAU(0):   2e0e010308221b78eacedda3554b9924
[     4.343] (II) NOUVEAU(0):   174f55bfef80714f8180010101010101
[     4.343] (II) NOUVEAU(0):   010101010101302a009851002a403070
[     4.343] (II) NOUVEAU(0):   1300520e1100001e000000fd00384b1f
[     4.343] (II) NOUVEAU(0):   510e000a202020202020000000fc004c
[     4.343] (II) NOUVEAU(0):   43443732564d0a2020202020000000ff
[     4.343] (II) NOUVEAU(0):   0034593134393737304e420a20200042
[     4.343] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[     4.343] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.343] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.343] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.343] (II) NOUVEAU(0): Output DVI-D-1 connected
[     4.343] (II) NOUVEAU(0): Output HDMI-1 disconnected
[     4.343] (II) NOUVEAU(0): Output VGA-1 connected
[     4.343] (II) NOUVEAU(0): Using spanning desktop for initial modes
[     4.343] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1280x1024 +0+0
[     4.343] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024 +1280+0
[     4.343] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.343] (--) NOUVEAU(0): Virtual size is 2560x1024 (pitch 0)
[     4.343] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[     4.343] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.343] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[     4.343] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[     4.343] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[     4.343] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[     4.343] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[     4.343] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[     4.343] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[     4.343] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[     4.343] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.343] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[     4.343] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.343] (==) NOUVEAU(0): DPI set to (96, 96)
[     4.343] (II) Loading sub module "fb"
[     4.343] (II) LoadModule: "fb"
[     4.343] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.344] (II) Module fb: vendor="X.Org Foundation"
[     4.344]  compiled for 1.19.0, module version = 1.0.0
[     4.344]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.344] (II) Loading sub module "shadowfb"
[     4.344] (II) LoadModule: "shadowfb"
[     4.344] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[     4.345] (II) Module shadowfb: vendor="X.Org Foundation"
[     4.345]  compiled for 1.19.0, module version = 1.0.0
[     4.345]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.345] (II) UnloadModule: "modesetting"
[     4.345] (II) Unloading modesetting
[     4.345] (II) UnloadModule: "fbdev"
[     4.345] (II) Unloading fbdev
[     4.345] (II) UnloadSubModule: "fbdevhw"
[     4.345] (II) Unloading fbdevhw
[     4.345] (II) UnloadModule: "vesa"
[     4.345] (II) Unloading vesa
[     4.345] (--) Depth 24 pixmap format is 32 bpp
[     4.366] (II) NOUVEAU(0): Channel setup complete.
[     4.385] (II) NOUVEAU(0): [COPY] async initialised.
[     4.388] (II) NOUVEAU(0): Hardware support for Present enabled
[     4.388] (II) NOUVEAU(0): [DRI2] Setup complete
[     4.388] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[     4.388] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[     4.388] (II) Loading sub module "exa"
[     4.388] (II) LoadModule: "exa"
[     4.388] (II) Loading /usr/lib/xorg/modules/libexa.so
[     4.388] (II) Module exa: vendor="X.Org Foundation"
[     4.388]  compiled for 1.19.0, module version = 2.6.0
[     4.388]  ABI class: X.Org Video Driver, version 23.0
[     4.388] (II) EXA(0): Driver allocated offscreen pixmaps
[     4.388] (II) EXA(0): Driver registered support for the following operations:
[     4.388] (II)         Solid
[     4.388] (II)         Copy
[     4.388] (II)         Composite (RENDER acceleration)
[     4.388] (II)         UploadToScreen
[     4.388] (II)         DownloadFromScreen
[     4.388] (==) NOUVEAU(0): Backing store enabled
[     4.388] (==) NOUVEAU(0): Silken mouse enabled
[     4.388] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[     4.388] (II) NOUVEAU(0): [XvMC] Extension initialized.
[     4.388] (==) NOUVEAU(0): DPMS enabled
[     4.388] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.389] (--) RandR disabled
[     4.391] (II) SELinux: Disabled on system
[     4.500] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     4.500] (II) AIGLX: enabled GLX_ARB_create_context
[     4.500] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     4.500] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     4.500] (II) AIGLX: enabled GLX_INTEL_swap_event
[     4.500] (II) AIGLX: enabled GLX_SGI_swap_control
[     4.500] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     4.500] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     4.500] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     4.500] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     4.501] (II) AIGLX: Loaded and initialized nouveau
[     4.501] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.504] (II) NOUVEAU(0): NVEnterVT is called.
[     4.552] (II) NOUVEAU(0): Setting screen physical size to 677 x 270
[     4.552] resize called 2560 1024
[     4.580] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.580] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.580] (II) LoadModule: "libinput"
[     4.580] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.583] (II) Module libinput: vendor="X.Org Foundation"
[     4.583]  compiled for 1.19.0, module version = 0.23.0
[     4.583]  Module class: X.Org XInput Driver
[     4.583]  ABI class: X.Org XInput driver, version 24.1
[     4.583] (II) Using input driver 'libinput' for 'Power Button'
[     4.583] (**) Power Button: always reports core events
[     4.583] (**) Option "Device" "/dev/input/event4"
[     4.583] (**) Option "_source" "server/udev"
[     4.583] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[     4.583] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[     4.596] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4"
[     4.596] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.596] (**) Option "xkb_model" "pc105"
[     4.596] (**) Option "xkb_layout" "fr"
[     4.596] (**) Option "xkb_variant" "latin9"
[     4.606] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[     4.606] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[     4.606] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     4.606] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.606] (II) Using input driver 'libinput' for 'Power Button'
[     4.606] (**) Power Button: always reports core events
[     4.606] (**) Option "Device" "/dev/input/event3"
[     4.606] (**) Option "_source" "server/udev"
[     4.606] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     4.606] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     4.624] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event3"
[     4.624] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     4.624] (**) Option "xkb_model" "pc105"
[     4.624] (**) Option "xkb_layout" "fr"
[     4.624] (**) Option "xkb_variant" "latin9"
[     4.624] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     4.624] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     4.624] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     4.624] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.624] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.624] (**) Sleep Button: always reports core events
[     4.624] (**) Option "Device" "/dev/input/event2"
[     4.624] (**) Option "_source" "server/udev"
[     4.624] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.624] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     4.640] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event2"
[     4.640] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     4.640] (**) Option "xkb_model" "pc105"
[     4.640] (**) Option "xkb_layout" "fr"
[     4.640] (**) Option "xkb_variant" "latin9"
[     4.640] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     4.640] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     4.640] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[     4.640] (II) No input driver specified, ignoring this device.
[     4.640] (II) This device may have been added with another device file.
[     4.640] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[     4.640] (II) No input driver specified, ignoring this device.
[     4.640] (II) This device may have been added with another device file.
[     4.641] (II) config/udev: Adding input device G-Tech Wireless Dongle (/dev/input/event0)
[     4.641] (**) G-Tech Wireless Dongle: Applying InputClass "libinput keyboard catchall"
[     4.641] (II) Using input driver 'libinput' for 'G-Tech Wireless Dongle'
[     4.641] (**) G-Tech Wireless Dongle: always reports core events
[     4.641] (**) Option "Device" "/dev/input/event0"
[     4.641] (**) Option "_source" "server/udev"
[     4.641] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is tagged by udev as: Keyboard
[     4.641] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is a keyboard
[     4.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A81:1004.0001/input/input3/event0"
[     4.680] (II) XINPUT: Adding extended input device "G-Tech Wireless Dongle" (type: KEYBOARD, id 9)
[     4.680] (**) Option "xkb_model" "pc105"
[     4.680] (**) Option "xkb_layout" "fr"
[     4.680] (**) Option "xkb_variant" "latin9"
[     4.680] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is tagged by udev as: Keyboard
[     4.680] (II) input device 'G-Tech Wireless Dongle', /dev/input/event0 is a keyboard
[     4.681] (II) config/udev: Adding input device G-Tech Wireless Dongle (/dev/input/event1)
[     4.681] (**) G-Tech Wireless Dongle: Applying InputClass "libinput pointer catchall"
[     4.681] (**) G-Tech Wireless Dongle: Applying InputClass "libinput keyboard catchall"
[     4.681] (II) Using input driver 'libinput' for 'G-Tech Wireless Dongle'
[     4.681] (**) G-Tech Wireless Dongle: always reports core events
[     4.681] (**) Option "Device" "/dev/input/event1"
[     4.681] (**) Option "_source" "server/udev"
[     4.681] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[     4.681] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a pointer caps
[     4.681] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a keyboard
[     4.716] (II) libinput: G-Tech Wireless Dongle: needs a virtual subdevice
[     4.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1A81:1004.0002/input/input4/event1"
[     4.716] (II) XINPUT: Adding extended input device "G-Tech Wireless Dongle" (type: MOUSE, id 10)
[     4.716] (**) Option "AccelerationScheme" "none"
[     4.716] (**) G-Tech Wireless Dongle: (accel) selected scheme none/0
[     4.716] (**) G-Tech Wireless Dongle: (accel) acceleration factor: 2.000
[     4.716] (**) G-Tech Wireless Dongle: (accel) acceleration threshold: 4
[     4.716] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is tagged by udev as: Keyboard Mouse
[     4.716] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a pointer caps
[     4.716] (II) input device 'G-Tech Wireless Dongle', /dev/input/event1 is a keyboard
[     4.717] (II) config/udev: Adding input device G-Tech Wireless Dongle (/dev/input/mouse0)
[     4.717] (II) No input driver specified, ignoring this device.
[     4.717] (II) This device may have been added with another device file.
[     4.717] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[     4.718] (II) No input driver specified, ignoring this device.
[     4.718] (II) This device may have been added with another device file.
[     4.718] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[     4.718] (II) No input driver specified, ignoring this device.
[     4.718] (II) This device may have been added with another device file.
[     4.719] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[     4.719] (II) No input driver specified, ignoring this device.
[     4.719] (II) This device may have been added with another device file.
[     4.719] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[     4.719] (II) No input driver specified, ignoring this device.
[     4.719] (II) This device may have been added with another device file.
[     4.719] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[     4.719] (II) No input driver specified, ignoring this device.
[     4.719] (II) This device may have been added with another device file.
[     4.719] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[     4.719] (II) No input driver specified, ignoring this device.
[     4.719] (II) This device may have been added with another device file.
[     4.720] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[     4.720] (II) No input driver specified, ignoring this device.
[     4.720] (II) This device may have been added with another device file.
[     4.720] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[     4.720] (II) No input driver specified, ignoring this device.
[     4.720] (II) This device may have been added with another device file.
[     4.720] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event14)
[     4.720] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.720] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     4.720] (**) Eee PC WMI hotkeys: always reports core events
[     4.720] (**) Option "Device" "/dev/input/event14"
[     4.720] (**) Option "_source" "server/udev"
[     4.720] (II) input device 'Eee PC WMI hotkeys', /dev/input/event14 is tagged by udev as: Keyboard
[     4.720] (II) input device 'Eee PC WMI hotkeys', /dev/input/event14 is a keyboard
[     4.748] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input17/event14"
[     4.748] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[     4.748] (**) Option "xkb_model" "pc105"
[     4.748] (**) Option "xkb_layout" "fr"
[     4.748] (**) Option "xkb_variant" "latin9"
[     4.748] (II) input device 'Eee PC WMI hotkeys', /dev/input/event14 is tagged by udev as: Keyboard
[     4.748] (II) input device 'Eee PC WMI hotkeys', /dev/input/event14 is a keyboard
[     4.748] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     4.748] (II) No input driver specified, ignoring this device.
[     4.748] (II) This device may have been added with another device file.
[     4.749] (II) config/udev: Adding input device lircd-uinput (/dev/input/event17)
[     4.749] (**) lircd-uinput: Applying InputClass "libinput keyboard catchall"
[     4.749] (II) Using input driver 'libinput' for 'lircd-uinput'
[     4.749] (**) lircd-uinput: always reports core events
[     4.749] (**) Option "Device" "/dev/input/event17"
[     4.749] (**) Option "_source" "server/udev"
[     4.749] (II) input device 'lircd-uinput', /dev/input/event17 is tagged by udev as: Keyboard
[     4.749] (II) input device 'lircd-uinput', /dev/input/event17 is a keyboard
[     4.784] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event17"
[     4.784] (II) XINPUT: Adding extended input device "lircd-uinput" (type: KEYBOARD, id 12)
[     4.784] (**) Option "xkb_model" "pc105"
[     4.784] (**) Option "xkb_layout" "fr"
[     4.784] (**) Option "xkb_variant" "latin9"
[     4.784] (II) input device 'lircd-uinput', /dev/input/event17 is tagged by udev as: Keyboard
[     4.784] (II) input device 'lircd-uinput', /dev/input/event17 is a keyboard
[     4.787] (**) G-Tech Wireless Dongle: Applying InputClass "libinput pointer catchall"
[     4.787] (**) G-Tech Wireless Dongle: Applying InputClass "libinput keyboard catchall"
[     4.787] (II) Using input driver 'libinput' for 'G-Tech Wireless Dongle'
[     4.787] (**) G-Tech Wireless Dongle: always reports core events
[     4.787] (**) Option "Device" "/dev/input/event1"
[     4.787] (**) Option "_source" "_driver/libinput"
[     4.787] (II) libinput: G-Tech Wireless Dongle: is a virtual subdevice
[     4.787] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1A81:1004.0002/input/input4/event1"
[     4.787] (II) XINPUT: Adding extended input device "G-Tech Wireless Dongle" (type: KEYBOARD, id 13)
[     4.787] (**) Option "xkb_model" "pc105"
[     4.787] (**) Option "xkb_layout" "fr"
[     4.787] (**) Option "xkb_variant" "latin9"
[     4.787] (II) config/udev: removing device lircd-uinput
[     4.828] (II) UnloadModule: "libinput"
[     4.828] (II) config/udev: Adding input device lircd-uinput (/dev/input/event17)
[     4.828] (**) lircd-uinput: Applying InputClass "libinput keyboard catchall"
[     4.828] (II) Using input driver 'libinput' for 'lircd-uinput'
[     4.828] (**) lircd-uinput: always reports core events
[     4.828] (**) Option "Device" "/dev/input/event17"
[     4.828] (**) Option "_source" "server/udev"
[     4.828] (II) input device 'lircd-uinput', /dev/input/event17 is tagged by udev as: Keyboard
[     4.828] (II) input device 'lircd-uinput', /dev/input/event17 is a keyboard
[     4.860] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event17"
[     4.860] (II) XINPUT: Adding extended input device "lircd-uinput" (type: KEYBOARD, id 12)
[     4.860] (**) Option "xkb_model" "pc105"
[     4.860] (**) Option "xkb_layout" "fr"
[     4.860] (**) Option "xkb_variant" "latin9"
[     4.860] (WW) Option "xkb_options" requires a string value
[     4.860] (II) input device 'lircd-uinput', /dev/input/event17 is tagged by udev as: Keyboard
[     4.860] (II) input device 'lircd-uinput', /dev/input/event17 is a keyboard
[     4.860] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[     4.860] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     4.860] failed to find screen to remove
[    12.913] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    12.913] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    12.913] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    12.913] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    12.913] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    12.913] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    12.913] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    12.993] resize called 2560 1024
[    13.102] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.102] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.102] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.102] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.102] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.102] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.102] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.170] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.170] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.170] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.170] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.170] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.170] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.170] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.237] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.237] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.237] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.237] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.237] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.237] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.237] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.859] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.859] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.859] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.859] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.859] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.859] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.859] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 


Edit à toto :
Mis la commande user séparée de son retour.

Hors ligne

#14 08-01-2017 13:03:14

raleur
Membre
Inscription : 03-10-2014

Re : freeze incompréhensibles - stretch [resolu]

anonyme a écrit :

ce que je comprends pas c'est pourquoi le gpu intel est actif ?


Qu'est-ce qui te fait penser que le GPU Intel est actif ?

totophe56 :
Il pourrait être intéressant de vérifier si c'est seulement X.org qui est planté et si la machine est encore un peu active ou complètement bloquée.
As-tu essayé les "touches magiques" (https://fr.wikipedia.org/wiki/Magic_SysRq_key) ?
La machine répond-elle encore sur le réseau (à un ping ou arping) ? Il faut connaître son adresse IP avant qu'elle plante.


Il vaut mieux montrer que raconter.

Hors ligne

#15 08-01-2017 13:12:10

anonyme
Invité

Re : freeze incompréhensibles - stretch [resolu]

Bonjour
@raleur
je suis en train de me poser la question roll
par contre que pense tu de cela :


[     4.860] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[     4.860] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     4.860] failed to find screen to remove
 


ça pourrai etre le gpu intel ?
nota: a été pris dans son dernier log en #13
pour moi ça carte est bien reconnu et fonctionne bien (je parle de la GT720 )

pour les erreurs si tu peut lui dire a quoi correspond cet ip 218.65.30.30 , je comprends pas ces lignes sshd (son serveur ssh je suppose ) c'est une ip publique .

voila déja un début de réponse : (son post en #9 )


[     4.309] (--) PCI: (0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xdd000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64
[     4.309] (--) PCI:*(0:1:0:0) 10de:1288:1043:8670 rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     4.309] (II) LoadModule: "glx"
 


quelque chose en PCI:0:0:2:0   et en PCI:0:1:0:0  (

et voila ce qui m a choqué


[     4.595] (II) modeset(G0): [DRI2] Setup complete
[     4.595] (II) modeset(G0): [DRI2]   DRI driver: i965
[     4.595] (II) modeset(G0): [DRI2]   VDPAU driver: i965
[     4.615] (II) NOUVEAU(0): Channel setup complete.
[     4.635] (II) NOUVEAU(0): [COPY] async initialised.
[     4.635] (II) NOUVEAU(0): Hardware support for Present enabled
[     4.635] (II) NOUVEAU(0): [DRI2] Setup complete
[     4.635] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[     4.635] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
 


init sur les 2 cartes intel et nvidia  ( en plus il poste 2 logs et les 2 sont différent roll )

puis vers la fin du log il a :  (comme en #13 )


[     5.152] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[     5.152] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1
[     5.152] failed to find screen to remove
[     5.153] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[     5.153] (II) No input driver specified, ignoring this device.
 



sur des gpu intel inactif (carte mere ancienne ou récente )  je n ai pas l habitude de ce comportement  (avec mes cartes nvidia)

je dirai que au niveau materiel il y a tentative de KMS pour configurer le gpu intel et pour nvidia le paquet xserver-xorg-video-nouveau prend en charge sa carte au niveau logiciel
a priori le noyau prend bien en charge la GT720
je regarderai un peu mes logs sur un I3 ou I7 , mais de mémoire ça me parle pas

@totophe56
ps: pour le bluetooth je ne sait pas ce que veut dire ton message d erreur , de plus dans le deuxieme post il n est plus présent
si il fonctionne bien tant mieux .

Dernière modification par anonyme (08-01-2017 13:41:53)

#16 08-01-2017 14:06:06

raleur
Membre
Inscription : 03-10-2014

Re : freeze incompréhensibles - stretch [resolu]

Tu as raison, dans le premier log Xorg il semble y avoir un GPU Intel pris en charge par le pilote générique modesetting. Il n'apparaît plus dans le second, peut-être suite à la modification dans le BIOS.

Concernant l'adresse IP, elle vient de Chine, c'est probablement encore une machine chinoise compromise qui sert de bot pour essayer de compromettre d'autres machines ayant des mots de passe faible par SSH. Rien de notable. J'en ai plein aussi.

Il vaut mieux montrer que raconter.

Hors ligne

#17 08-01-2017 14:43:31

anonyme
Invité

Re : freeze incompréhensibles - stretch [resolu]

@totophe56
tu a forcé la carte nvidia dans le bios , ton log est correct , je vois pas de raison que ça plante .
regarde les conseils en #14 de raleur pour voir dans quel état est réellement la machine au moment du bug .
au niveau du serveur X le passage a un driver non-free mais personnellement je ne te le conseille pas au vu du retour de ton log .
essaie de récupérer plus d informations (si tu utilise des choses sans fil , souris , clavier etc ...... a surveiller )
par exemple


[     4.787] (**) G-Tech Wireless Dongle: Applying InputClass "libinput pointer catchall"
[     4.787] (**) G-Tech Wireless Dongle: Applying InputClass "libinput keyboard catchall"
[     4.787] (II) Using input driver 'libinput' for 'G-Tech Wireless Dongle'
 

Dernière modification par anonyme (08-01-2017 14:46:03)

#18 09-01-2017 21:07:35

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

Bonsoir à vous,

j'ai viré le dongle et clavier/souris sans fil par clavier/souris filaire avec adaptateur filaire (il n'y a pas de PS2 sur ma machine)

en ce qui concerne l'ip 218.65.30.30 c'est bien une tentative d'intrusion qui venait d'une centaine de kilomètres de chez moi, il faut absolument interdire les connexions root en SSH dans le le fichier sshd_config neutral

merci beaucoup pour les touches magiques, je ne connaissais pas, je ne connaissais que le ctrl alt f1 pour accéder à la console mais cela ne fonctionnait pas

le ping est ok, le nmap retrouve bien les services et ports ouvert, par contre je ne sais pas pour l'affichage des pages webs, je n'avais pas configuré mon /etc/hosts pour accéder à mes virtualhosts à partir de mes clients

donc pour l'instant stand-by en attendant le prochain plantage en clavier filaire

merci encore à vous cool

Hors ligne

#19 10-01-2017 00:53:45

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

Le clavier/souris filaire ne change rien neutral

ping zenmap affichage des pages du serveur web ok

touches magiques non fonctionnelles, pas d'accès à la console en faisant ctrl alt f1, seul moyen pour l'extinction pour l'instant c'est le bouton (une toute petite ampoule vient de s'allumer, je vais configurer mon serveur ssh et essayer l'extinction à distance demain scratchhead.gif )

l'interface graphique est bloquée comme si on avait fait un arrêt sur image hmm
merci pour vos précieux conseils à venir smile

journalctl -r -p err



-- Logs begin at Mon 2017-01-09 23:33:38 CET, end at Mon 2017-01-09 23:36:44 CET. --
janv. 09 23:33:44 station /hpfax[1023]: [1023]: error: Failed to create /var/spool/cups/tmp/.hplip
janv. 09 23:33:39 station bluetoothd[575]: Failed to obtain handles for "Service Changed" characteristic
janv. 09 23:33:39 station avahi-daemon[588]: chroot.c: open() failed: No such file or directory
janv. 09 23:33:38 station kernel: nouveau 0000:01:00.0: priv: HUB0: 085014 ffffffff (1e70820b)


nano /var/log/Xorg.0.log


[     2.973]
X.Org X Server 1.19.0
Release Date: 2016-11-15
[     2.973] X Protocol Version 11, Revision 0
[     2.973] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     2.973] Current Operating System: Linux station 4.8.0-2-amd64 #1 SMP Debian 4.8.11-1 (2016-12-02) x86_64
[     2.973] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=8cb1de98-1e8c-4f73-8606-2e80612bbb8a ro quiet splash elevator=noop
[     2.973] Build Date: 16 December 2016  07:30:27PM
[     2.973] xorg-server 2:1.19.0-3 (https://www.debian.org/support)
[     2.973] Current version of pixman: 0.34.0
[     2.973]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     2.973] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.973] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  9 23:33:39 2017
[     2.979] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     2.981] (==) No Layout section.  Using the first Screen section.
[     2.981] (==) No screen section available. Using defaults.
[     2.981] (**) |-->Screen "Default Screen Section" (0)
[     2.981] (**) |   |-->Monitor "<default monitor>"
[     2.982] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     2.982] (==) Automatically adding devices
[     2.982] (==) Automatically enabling devices
[     2.982] (==) Automatically adding GPU devices
[     2.982] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     2.986] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     2.986]  Entry deleted from font path.
[     2.987] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     2.987] (==) ModulePath set to "/usr/lib/xorg/modules"
[     2.987] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     2.987] (II) Loader magic: 0x55638a2e5e00
[     2.987] (II) Module ABI versions:
[     2.987]  X.Org ANSI C Emulation: 0.4
[     2.987]  X.Org Video Driver: 23.0
[     2.988]  X.Org XInput driver : 24.1
[     2.988]  X.Org Server Extension : 10.0
[     2.988] (++) using VT number 7

[     2.988] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     2.988] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.161] (--) PCI:*(0:1:0:0) 10de:1288:1043:8670 rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     4.161] (II) LoadModule: "glx"
[     4.161] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.167] (II) Module glx: vendor="X.Org Foundation"
[     4.167]  compiled for 1.19.0, module version = 1.0.0
[     4.167]  ABI class: X.Org Server Extension, version 10.0
[     4.167] (==) Matched nouveau as autoconfigured driver 0
[     4.167] (==) Matched nv as autoconfigured driver 1
[     4.167] (==) Matched nouveau as autoconfigured driver 2
[     4.167] (==) Matched nv as autoconfigured driver 3
[     4.167] (==) Matched modesetting as autoconfigured driver 4
[     4.167] (==) Matched fbdev as autoconfigured driver 5
[     4.167] (==) Matched vesa as autoconfigured driver 6
[     4.167] (==) Assigned the driver to the xf86ConfigLayout
[     4.167] (II) LoadModule: "nouveau"
[     4.169] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     4.170] (II) Module nouveau: vendor="X.Org Foundation"
[     4.170]  compiled for 1.19.0, module version = 1.0.13
[     4.170]  Module class: X.Org Video Driver
[     4.170]  ABI class: X.Org Video Driver, version 23.0
[     4.170] (II) LoadModule: "nv"
[     4.170] (WW) Warning, couldn't open module nv
[     4.170] (II) UnloadModule: "nv"
[     4.170] (II) Unloading nv
[     4.170] (EE) Failed to load module "nv" (module does not exist, 0)
[     4.170] (II) LoadModule: "modesetting"
[     4.170] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.170] (II) Module modesetting: vendor="X.Org Foundation"
[     4.170]  compiled for 1.19.0, module version = 1.19.0
[     4.170]  Module class: X.Org Video Driver
[     4.170]  ABI class: X.Org Video Driver, version 23.0
[     4.170] (II) LoadModule: "fbdev"
[     4.170] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.171] (II) Module fbdev: vendor="X.Org Foundation"
[     4.171]  compiled for 1.19.0, module version = 0.4.4
[     4.171]  Module class: X.Org Video Driver
[     4.171]  ABI class: X.Org Video Driver, version 23.0
[     4.171] (II) LoadModule: "vesa"
[     4.171] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.171] (II) Module vesa: vendor="X.Org Foundation"
[     4.171]  compiled for 1.19.0, module version = 2.3.4
[     4.171]  Module class: X.Org Video Driver
[     4.171]  ABI class: X.Org Video Driver, version 23.0
[     4.171] (II) NOUVEAU driver Date:   Tue Sep 20 00:31:06 2016 -0400
[     4.171] (II) NOUVEAU driver for NVIDIA chipset families :
[     4.171]  RIVA TNT        (NV04)
[     4.171]  RIVA TNT2       (NV05)
[     4.171]  GeForce 256     (NV10)
[     4.171]  GeForce 2       (NV11, NV15)
[     4.171]  GeForce 4MX     (NV17, NV18)
[     4.171]  GeForce 3       (NV20)
[     4.171]  GeForce 4Ti     (NV25, NV28)
[     4.171]  GeForce FX      (NV3x)
[     4.171]  GeForce 6       (NV4x)
[     4.171]  GeForce 7       (G7x)
[     4.171]  GeForce 8       (G8x)
[     4.171]  GeForce GTX 200 (NVA0)
[     4.171]  GeForce GTX 400 (NVC0)
[     4.171] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.171] (II) FBDEV: driver for framebuffer: fbdev
[     4.171] (II) VESA: driver for VESA chipsets: vesa
[     4.173] (II) [drm] nouveau interface version: 1.3.1
[     4.173] (WW) Falling back to old probe method for modesetting
[     4.173] (WW) Falling back to old probe method for fbdev
[     4.173] (II) Loading sub module "fbdevhw"
[     4.173] (II) LoadModule: "fbdevhw"
[     4.173] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.173] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.173]  compiled for 1.19.0, module version = 0.0.2
[     4.173]  ABI class: X.Org Video Driver, version 23.0
[     4.173] (WW) Falling back to old probe method for vesa
[     4.173] (II) Loading sub module "dri2"
[     4.173] (II) LoadModule: "dri2"
[     4.173] (II) Module "dri2" already built-in
[     4.173] (--) NOUVEAU(0): Chipset: "NVIDIA NV106"
[     4.173] (II) NOUVEAU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     4.173] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[     4.173] (==) NOUVEAU(0): RGB weight 888
[     4.173] (==) NOUVEAU(0): Default visual is TrueColor
[     4.173] (==) NOUVEAU(0): Using HW cursor
[     4.173] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[     4.173] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[     4.173] (==) NOUVEAU(0): Page flipping enabled
[     4.173] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[     4.173] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[     4.173] (II) NOUVEAU(0): Initializing outputs ...
[     4.206] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[     4.207] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[     4.239] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[     4.239] (II) NOUVEAU(0): 3 crtcs needed for screen.
[     4.256] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[     4.256] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[     4.256] (II) NOUVEAU(0): Allocated crtc nr. 2 to this screen.
[     4.256] (II) NOUVEAU(0): Allocated crtc nr. 3 to this screen.
[     4.289] (II) NOUVEAU(0): EDID for output DVI-D-1
[     4.289] (II) NOUVEAU(0): Manufacturer: SAM  Model: 10f  Serial#: 1296707897
[     4.289] (II) NOUVEAU(0): Year: 2004  Week: 49
[     4.289] (II) NOUVEAU(0): EDID Version: 1.3
[     4.289] (II) NOUVEAU(0): Digital Display Input
[     4.289] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[     4.289] (II) NOUVEAU(0): Gamma: 2.20
[     4.289] (II) NOUVEAU(0): DPMS capabilities: Off
[     4.289] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[     4.289] (II) NOUVEAU(0): First detailed timing is preferred mode
[     4.289] (II) NOUVEAU(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[     4.289] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[     4.289] (II) NOUVEAU(0): Supported established timings:
[     4.289] (II) NOUVEAU(0): 720x400@70Hz
[     4.289] (II) NOUVEAU(0): 640x480@60Hz
[     4.289] (II) NOUVEAU(0): 640x480@67Hz
[     4.289] (II) NOUVEAU(0): 640x480@72Hz
[     4.289] (II) NOUVEAU(0): 640x480@75Hz
[     4.289] (II) NOUVEAU(0): 800x600@56Hz
[     4.289] (II) NOUVEAU(0): 800x600@60Hz
[     4.289] (II) NOUVEAU(0): 800x600@72Hz
[     4.289] (II) NOUVEAU(0): 800x600@75Hz
[     4.289] (II) NOUVEAU(0): 832x624@75Hz
[     4.289] (II) NOUVEAU(0): 1024x768@60Hz
[     4.289] (II) NOUVEAU(0): 1024x768@70Hz
[     4.289] (II) NOUVEAU(0): 1024x768@75Hz
[     4.289] (II) NOUVEAU(0): 1280x1024@75Hz
[     4.289] (II) NOUVEAU(0): 1152x864@75Hz
[     4.289] (II) NOUVEAU(0): Manufacturer's mask: 0
[     4.289] (II) NOUVEAU(0): Supported standard timings:
[     4.289] (II) NOUVEAU(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.289] (II) NOUVEAU(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     4.289] (II) NOUVEAU(0): Supported detailed timing:
[     4.289] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[     4.289] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     4.289] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     4.289] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[     4.289] (II) NOUVEAU(0): Monitor name: SyncMaster
[     4.289] (II) NOUVEAU(0): Serial No: HSHXB11543
[     4.289] (II) NOUVEAU(0): EDID (in hex):
[     4.289] (II) NOUVEAU(0):   00ffffffffffff004c2d0f0139314a4d
[     4.289] (II) NOUVEAU(0):   310e010380261e782aee95a3544c9926
[     4.289] (II) NOUVEAU(0):   0f5054bfef808180714f010101010101
[     4.289] (II) NOUVEAU(0):   010101010101302a009851002a403070
[     4.289] (II) NOUVEAU(0):   1300782d1100001e000000fd00384b1e
[     4.289] (II) NOUVEAU(0):   510e000a202020202020000000fc0053
[     4.289] (II) NOUVEAU(0):   796e634d61737465720a2020000000ff
[     4.289] (II) NOUVEAU(0):   00485348584231313534330a20200092
[     4.289] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
[     4.289] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.289] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.289] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.290] (II) NOUVEAU(0): EDID for output HDMI-1
[     4.322] (II) NOUVEAU(0): EDID for output VGA-1
[     4.322] (II) NOUVEAU(0): Manufacturer: NEC  Model: 6659  Serial#: 16843009
[     4.322] (II) NOUVEAU(0): Year: 2004  Week: 46
[     4.322] (II) NOUVEAU(0): EDID Version: 1.3
[     4.322] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[     4.322] (II) NOUVEAU(0): Sync:  Separate
[     4.322] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[     4.322] (II) NOUVEAU(0): Gamma: 2.20
[     4.322] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     4.322] (II) NOUVEAU(0): First detailed timing is preferred mode
[     4.322] (II) NOUVEAU(0): redX: 0.640 redY: 0.332   greenX: 0.296 greenY: 0.600
[     4.322] (II) NOUVEAU(0): blueX: 0.144 blueY: 0.091   whiteX: 0.312 whiteY: 0.333
[     4.322] (II) NOUVEAU(0): Supported established timings:
[     4.322] (II) NOUVEAU(0): 720x400@70Hz
[     4.323] (II) NOUVEAU(0): 640x480@60Hz
[     4.323] (II) NOUVEAU(0): 640x480@67Hz
[     4.323] (II) NOUVEAU(0): 640x480@72Hz
[     4.323] (II) NOUVEAU(0): 640x480@75Hz
[     4.323] (II) NOUVEAU(0): 800x600@56Hz
[     4.323] (II) NOUVEAU(0): 800x600@60Hz
[     4.323] (II) NOUVEAU(0): 800x600@72Hz
[     4.323] (II) NOUVEAU(0): 800x600@75Hz
[     4.323] (II) NOUVEAU(0): 832x624@75Hz
[     4.323] (II) NOUVEAU(0): 1024x768@60Hz
[     4.323] (II) NOUVEAU(0): 1024x768@70Hz
[     4.323] (II) NOUVEAU(0): 1024x768@75Hz
[     4.323] (II) NOUVEAU(0): 1280x1024@75Hz
[     4.323] (II) NOUVEAU(0): 1152x864@75Hz
[     4.323] (II) NOUVEAU(0): Manufacturer's mask: 0
[     4.323] (II) NOUVEAU(0): Supported standard timings:
[     4.323] (II) NOUVEAU(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     4.323] (II) NOUVEAU(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     4.323] (II) NOUVEAU(0): Supported detailed timing:
[     4.323] (II) NOUVEAU(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[     4.323] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     4.323] (II) NOUVEAU(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     4.323] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[     4.323] (II) NOUVEAU(0): Monitor name: LCD72VM
[     4.323] (II) NOUVEAU(0): Serial No: 4Y149770NB
[     4.323] (II) NOUVEAU(0): EDID (in hex):
[     4.323] (II) NOUVEAU(0):   00ffffffffffff0038a3596601010101
[     4.323] (II) NOUVEAU(0):   2e0e010308221b78eacedda3554b9924
[     4.323] (II) NOUVEAU(0):   174f55bfef80714f8180010101010101
[     4.323] (II) NOUVEAU(0):   010101010101302a009851002a403070
[     4.323] (II) NOUVEAU(0):   1300520e1100001e000000fd00384b1f
[     4.323] (II) NOUVEAU(0):   510e000a202020202020000000fc004c
[     4.323] (II) NOUVEAU(0):   43443732564d0a2020202020000000ff
[     4.323] (II) NOUVEAU(0):   0034593134393737304e420a20200042
[     4.323] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[     4.323] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.323] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.323] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.323] (II) NOUVEAU(0): Output DVI-D-1 connected
[     4.323] (II) NOUVEAU(0): Output HDMI-1 disconnected
[     4.323] (II) NOUVEAU(0): Output VGA-1 connected
[     4.323] (II) NOUVEAU(0): Using spanning desktop for initial modes
[     4.323] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1280x1024 +0+0
[     4.323] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024 +1280+0
[     4.323] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.323] (--) NOUVEAU(0): Virtual size is 2560x1024 (pitch 0)
[     4.323] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[     4.323] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     4.323] (**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[     4.323] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[     4.323] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[     4.323] (II) NOUVEAU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[     4.323] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[     4.323] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[     4.323] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[     4.323] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[     4.323] (II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     4.323] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[     4.323] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     4.323] (==) NOUVEAU(0): DPI set to (96, 96)
[     4.323] (II) Loading sub module "fb"
[     4.323] (II) LoadModule: "fb"
[     4.323] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.324] (II) Module fb: vendor="X.Org Foundation"
[     4.324]  compiled for 1.19.0, module version = 1.0.0
[     4.324]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.324] (II) Loading sub module "shadowfb"
[     4.324] (II) LoadModule: "shadowfb"
[     4.324] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[     4.324] (II) Module shadowfb: vendor="X.Org Foundation"
[     4.324]  compiled for 1.19.0, module version = 1.0.0
[     4.324]  ABI class: X.Org ANSI C Emulation, version 0.4
[     4.324] (II) UnloadModule: "modesetting"
[     4.324] (II) Unloading modesetting
[     4.324] (II) UnloadModule: "fbdev"
[     4.324] (II) Unloading fbdev
[     4.324] (II) UnloadSubModule: "fbdevhw"
[     4.324] (II) Unloading fbdevhw
[     4.324] (II) UnloadModule: "vesa"
[     4.324] (II) Unloading vesa
[     4.324] (--) Depth 24 pixmap format is 32 bpp
[     4.344] (II) NOUVEAU(0): Channel setup complete.
[     4.364] (II) NOUVEAU(0): [COPY] async initialised.
[     4.366] (II) NOUVEAU(0): Hardware support for Present enabled
[     4.366] (II) NOUVEAU(0): [DRI2] Setup complete
[     4.366] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[     4.366] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[     4.366] (II) Loading sub module "exa"
[     4.366] (II) LoadModule: "exa"
[     4.366] (II) Loading /usr/lib/xorg/modules/libexa.so
[     4.366] (II) Module exa: vendor="X.Org Foundation"
[     4.366]  compiled for 1.19.0, module version = 2.6.0
[     4.366]  ABI class: X.Org Video Driver, version 23.0
[     4.366] (II) EXA(0): Driver allocated offscreen pixmaps
[     4.366] (II) EXA(0): Driver registered support for the following operations:
[     4.366] (II)         Solid
[     4.366] (II)         Copy
[     4.366] (II)         Composite (RENDER acceleration)
[     4.366] (II)         UploadToScreen
[     4.366] (II)         DownloadFromScreen
[     4.366] (==) NOUVEAU(0): Backing store enabled
[     4.366] (==) NOUVEAU(0): Silken mouse enabled
[     4.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[     4.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
[     4.366] (==) NOUVEAU(0): DPMS enabled
[     4.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.367] (--) RandR disabled
[     4.369] (II) SELinux: Disabled on system
[     4.492] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     4.492] (II) AIGLX: enabled GLX_ARB_create_context
[     4.492] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     4.492] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     4.492] (II) AIGLX: enabled GLX_INTEL_swap_event
[     4.492] (II) AIGLX: enabled GLX_SGI_swap_control
[     4.492] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     4.492] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     4.492] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     4.492] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     4.492] (II) AIGLX: Loaded and initialized nouveau
[     4.492] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.495] (II) NOUVEAU(0): NVEnterVT is called.
[     4.534] (II) NOUVEAU(0): Setting screen physical size to 677 x 270
[     4.534] resize called 2560 1024
[     4.562] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     4.562] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.562] (II) LoadModule: "libinput"
[     4.562] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.565] (II) Module libinput: vendor="X.Org Foundation"
[     4.565]  compiled for 1.19.0, module version = 0.23.0
[     4.565]  Module class: X.Org XInput Driver
[     4.565]  ABI class: X.Org XInput driver, version 24.1
[     4.565] (II) Using input driver 'libinput' for 'Power Button'
[     4.565] (**) Power Button: always reports core events
[     4.565] (**) Option "Device" "/dev/input/event5"
[     4.565] (**) Option "_source" "server/udev"
[     4.565] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[     4.565] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[     4.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event5"
[     4.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.580] (**) Option "xkb_model" "pc105"
[     4.580] (**) Option "xkb_layout" "fr"
[     4.580] (**) Option "xkb_variant" "latin9"
[     4.591] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[     4.591] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[     4.591] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[     4.591] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.591] (II) Using input driver 'libinput' for 'Power Button'
[     4.591] (**) Power Button: always reports core events
[     4.591] (**) Option "Device" "/dev/input/event4"
[     4.591] (**) Option "_source" "server/udev"
[     4.592] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[     4.592] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[     4.608] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event4"
[     4.608] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     4.608] (**) Option "xkb_model" "pc105"
[     4.608] (**) Option "xkb_layout" "fr"
[     4.608] (**) Option "xkb_variant" "latin9"
[     4.608] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[     4.608] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[     4.608] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[     4.608] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.608] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.608] (**) Sleep Button: always reports core events
[     4.608] (**) Option "Device" "/dev/input/event3"
[     4.608] (**) Option "_source" "server/udev"
[     4.608] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[     4.608] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[     4.628] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event3"
[     4.628] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     4.628] (**) Option "xkb_model" "pc105"
[     4.628] (**) Option "xkb_layout" "fr"
[     4.628] (**) Option "xkb_variant" "latin9"
[     4.628] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[     4.628] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[     4.629] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[     4.629] (II) No input driver specified, ignoring this device.
[     4.629] (II) This device may have been added with another device file.
[     4.629] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[     4.629] (II) No input driver specified, ignoring this device.
[     4.629] (II) This device may have been added with another device file.
[     4.629] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event0)
[     4.629] (**) Logitech Optical USB Mouse: Applying InputClass "libinput pointer catchall"
[     4.629] (II) Using input driver 'libinput' for 'Logitech Optical USB Mouse'
[     4.629] (**) Logitech Optical USB Mouse: always reports core events
[     4.629] (**) Option "Device" "/dev/input/event0"
[     4.629] (**) Option "_source" "server/udev"
[     4.630] (II) input device 'Logitech Optical USB Mouse', /dev/input/event0 is tagged by udev as: Mouse
[     4.630] (II) Device 'Logitech Optical USB Mouse' set to 400 DPI
[     4.630] (II) input device 'Logitech Optical USB Mouse', /dev/input/event0 is a pointer caps
[     4.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C016.0001/input/input3/event0"
[     4.664] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 9)
[     4.664] (**) Option "AccelerationScheme" "none"
[     4.664] (**) Logitech Optical USB Mouse: (accel) selected scheme none/0
[     4.664] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[     4.664] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[     4.664] (II) input device 'Logitech Optical USB Mouse', /dev/input/event0 is tagged by udev as: Mouse
[     4.664] (II) Device 'Logitech Optical USB Mouse' set to 400 DPI
[     4.664] (II) input device 'Logitech Optical USB Mouse', /dev/input/event0 is a pointer caps
[     4.665] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[     4.665] (II) No input driver specified, ignoring this device.
[     4.665] (II) This device may have been added with another device file.
[     4.665] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/event1)
[     4.665] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput keyboard catchall"
[     4.665] (II) Using input driver 'libinput' for 'GASIA PS2toUSB Adapter'
[     4.665] (**) GASIA PS2toUSB Adapter: always reports core events
[     4.665] (**) Option "Device" "/dev/input/event1"
[     4.665] (**) Option "_source" "server/udev"
[     4.666] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event1 is tagged by udev as: Keyboard
[     4.666] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event1 is a keyboard
[     4.704] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-1/3-1:1.0/0003:0E8F:0020.0002/input/input4/event1"
[     4.704] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: KEYBOARD, id 10)
[     4.704] (**) Option "xkb_model" "pc105"
[     4.704] (**) Option "xkb_layout" "fr"
[     4.704] (**) Option "xkb_variant" "latin9"
[     4.704] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event1 is tagged by udev as: Keyboard
[     4.704] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event1 is a keyboard
[     4.705] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/event2)
[     4.705] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput pointer catchall"
[     4.705] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput keyboard catchall"
[     4.705] (II) Using input driver 'libinput' for 'GASIA PS2toUSB Adapter'
[     4.705] (**) GASIA PS2toUSB Adapter: always reports core events
[     4.705] (**) Option "Device" "/dev/input/event2"
[     4.705] (**) Option "_source" "server/udev"
[     4.705] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[     4.705] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event2 is a pointer caps
[     4.705] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event2 is a keyboard
[     4.752] (II) libinput: GASIA PS2toUSB Adapter: needs a virtual subdevice
[     4.752] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-1/3-1:1.1/0003:0E8F:0020.0003/input/input5/event2"
[     4.752] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: MOUSE, id 11)
[     4.752] (**) Option "AccelerationScheme" "none"
[     4.752] (**) GASIA PS2toUSB Adapter: (accel) selected scheme none/0
[     4.752] (**) GASIA PS2toUSB Adapter: (accel) acceleration factor: 2.000
[     4.752] (**) GASIA PS2toUSB Adapter: (accel) acceleration threshold: 4
[     4.752] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event2 is tagged by udev as: Keyboard Mouse
[     4.753] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event2 is a pointer caps
[     4.753] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event2 is a keyboard
[     4.753] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/mouse1)
[     4.753] (II) No input driver specified, ignoring this device.
[     4.753] (II) This device may have been added with another device file.
[     4.753] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[     4.753] (II) No input driver specified, ignoring this device.
[     4.753] (II) This device may have been added with another device file.
[     4.754] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[     4.754] (II) No input driver specified, ignoring this device.
[     4.754] (II) This device may have been added with another device file.
[     4.754] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[     4.754] (II) No input driver specified, ignoring this device.
[     4.754] (II) This device may have been added with another device file.
[     4.754] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[     4.754] (II) No input driver specified, ignoring this device.
[     4.754] (II) This device may have been added with another device file.
[     4.754] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[     4.754] (II) No input driver specified, ignoring this device.
[     4.754] (II) This device may have been added with another device file.
[     4.755] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[     4.755] (II) No input driver specified, ignoring this device.
[     4.755] (II) This device may have been added with another device file.
[     4.755] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event14)
[     4.755] (II) No input driver specified, ignoring this device.
[     4.755] (II) This device may have been added with another device file.
[     4.755] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event15)
[     4.755] (II) No input driver specified, ignoring this device.
[     4.755] (II) This device may have been added with another device file.
[     4.755] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[     4.755] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     4.755] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     4.755] (**) Eee PC WMI hotkeys: always reports core events
[     4.755] (**) Option "Device" "/dev/input/event7"
[     4.755] (**) Option "_source" "server/udev"
[     4.756] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[     4.756] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is a keyboard
[     4.784] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input10/event7"
[     4.784] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[     4.784] (**) Option "xkb_model" "pc105"
[     4.784] (**) Option "xkb_layout" "fr"
[     4.784] (**) Option "xkb_variant" "latin9"
[     4.784] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[     4.784] (II) input device 'Eee PC WMI hotkeys', /dev/input/event7 is a keyboard
[     4.784] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     4.784] (II) No input driver specified, ignoring this device.
[     4.784] (II) This device may have been added with another device file.
[     4.785] (II) config/udev: Adding input device lircd-uinput (/dev/input/event18)
[     4.785] (**) lircd-uinput: Applying InputClass "libinput keyboard catchall"
[     4.785] (II) Using input driver 'libinput' for 'lircd-uinput'
[     4.785] (**) lircd-uinput: always reports core events
[     4.785] (**) Option "Device" "/dev/input/event18"
[     4.785] (**) Option "_source" "server/udev"
[     4.785] (II) input device 'lircd-uinput', /dev/input/event18 is tagged by udev as: Keyboard
[     4.785] (II) input device 'lircd-uinput', /dev/input/event18 is a keyboard
[     4.816] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event18"
[     4.816] (II) XINPUT: Adding extended input device "lircd-uinput" (type: KEYBOARD, id 13)
[     4.816] (**) Option "xkb_model" "pc105"
[     4.816] (**) Option "xkb_layout" "fr"
[     4.816] (**) Option "xkb_variant" "latin9"
[     4.816] (II) input device 'lircd-uinput', /dev/input/event18 is tagged by udev as: Keyboard
[     4.816] (II) input device 'lircd-uinput', /dev/input/event18 is a keyboard
[     4.819] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput pointer catchall"
[     4.819] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput keyboard catchall"
[     4.819] (II) Using input driver 'libinput' for 'GASIA PS2toUSB Adapter'
[     4.819] (**) GASIA PS2toUSB Adapter: always reports core events
[     4.819] (**) Option "Device" "/dev/input/event2"
[     4.819] (**) Option "_source" "_driver/libinput"
[     4.819] (II) libinput: GASIA PS2toUSB Adapter: is a virtual subdevice
[     4.819] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-1/3-1:1.1/0003:0E8F:0020.0003/input/input5/event2"
[     4.819] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: KEYBOARD, id 14)
[     4.819] (**) Option "xkb_model" "pc105"
[     4.819] (**) Option "xkb_layout" "fr"
[     4.819] (**) Option "xkb_variant" "latin9"
[     4.819] (II) config/udev: removing device lircd-uinput
[     4.848] (II) UnloadModule: "libinput"
[     4.848] (II) config/udev: Adding input device lircd-uinput (/dev/input/event18)
[     4.848] (**) lircd-uinput: Applying InputClass "libinput keyboard catchall"
[     4.848] (II) Using input driver 'libinput' for 'lircd-uinput'
[     4.848] (**) lircd-uinput: always reports core events
[     4.848] (**) Option "Device" "/dev/input/event18"
[     4.848] (**) Option "_source" "server/udev"
[     4.848] (II) input device 'lircd-uinput', /dev/input/event18 is tagged by udev as: Keyboard
[     4.848] (II) input device 'lircd-uinput', /dev/input/event18 is a keyboard
[     4.880] (**) Option "config_info" "udev:/sys/devices/virtual/input/input21/event18"
[     4.880] (II) XINPUT: Adding extended input device "lircd-uinput" (type: KEYBOARD, id 13)
[     4.880] (**) Option "xkb_model" "pc105"
[     4.880] (**) Option "xkb_layout" "fr"
[     4.880] (**) Option "xkb_variant" "latin9"
[     4.880] (WW) Option "xkb_options" requires a string value
[     4.880] (II) input device 'lircd-uinput', /dev/input/event18 is tagged by udev as: Keyboard
[     4.880] (II) input device 'lircd-uinput', /dev/input/event18 is a keyboard
[     4.880] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[     4.880] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     4.880] failed to find screen to remove
[    13.156] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.156] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    13.156] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    13.156] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.156] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.156] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.156] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.232] resize called 2560 1024
[    13.347] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.347] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.347] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.347] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.347] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.347] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.347] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.413] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.413] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.413] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.413] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.413] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.413] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.413] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.479] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.480] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.480] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.480] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.480] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.480] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.480] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    13.858] (II) NOUVEAU(0): EDID vendor "NEC", prod id 26201
[    13.858] (II) NOUVEAU(0): Using hsync ranges from config file
[    13.858] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    13.858] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    13.858] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.858] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    13.858] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 

Hors ligne

#20 10-01-2017 09:46:25

anonyme
Invité

Re : freeze incompréhensibles - stretch [resolu]

Bonjour
toujours les messages :
message du noyau


janv. 09 23:33:38 station kernel: nouveau 0000:01:00.0: priv: HUB0: 085014 ffffffff (1e70820b)
 


detection et suppression


[     2.988] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.161] (--) PCI:*(0:1:0:0) 10de:1288:1043:8670 rev 161, Mem @ 0xde000000/16777216, 0xd0000000/134217728, 0xd8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     4.161] (II) LoadModule: "glx"

[     4.880] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[     4.880] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[     4.880] failed to find screen to remove
 



d'aprés tes tests , tu perds l affichage (et en option clavier et souris ) mais la machine reste active (ping du pc par exemple ok )

peut etre qu un test avec ta carte intel (nvidia GT720 retiré du pc et bios sur mode auto pour le gpu ) pour confirmer l absence de "plantage" .
ps: il me semble que tu n avait aucun problème en intel , ta demande etait d utiliser ton gpu nvidia a la place de l intel pour un meilleur affichage
si le retour est positif l installation du driver non-free nvidia des dépots debian (version 375.xx ) (remise en place de la GT720 et bios sur manuel => PCIe )

pour le test du gpu intel au niveau de debian rien a faire (détection auto ) ça devrait bien se passer

pour le driver non-free nvidia je te donnerai la commande a faire si tu est d'accord pour le faire.

ça va permettre de se débarrasser de l erreur de nouveau et peut etre une meilleure gestion de la GT720.
ça va aussi confirmer le problème graphique.

dit moi ce que tu en pense .

nota: pour le clavier souri juste pour confirmer  , a priori ça ne vient pas de lui . (l absence de ps2 n'est pas un souci , en usb ça fonctionne aussi bien )
tu pourra remettre le sans fil si ça n apporte aucune amélioration

un détail : ce matin j'ai remarqué une mise a jour du noyau 4.8 sur stretch , a tu fais la mise a jour de stretch ? (personnellement je ne l ai pas fait encore sur aucune machines )

Dernière modification par anonyme (10-01-2017 10:01:22)

#21 10-01-2017 10:03:22

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

Pas de soucis anonyme, je vire la carte dans la journée pou tester avec le GPU intel ;-)

Je vous tiens au courant smile

Hors ligne

#22 10-01-2017 10:59:31

anonyme
Invité

Re : freeze incompréhensibles - stretch [resolu]

pour préparer le terrain un petit tour chez nvidia , voici la liste des drivers pour ta carte (sous linux64) :



Recommandé/Beta:

    Nom   Version   Date d’introduction
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   340.101   14.12.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   375.26  14.12.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   375.20  18.11.2016
  Linux x64 (AMD64/EM64T) Display Driver BETA   375.10  20.10.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   367.57  10.10.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   340.98  26.9.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   370.28  8.9.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   367.44  23.8.2016
  Linux x64 (AMD64/EM64T) Display Driver BETA   370.23  15.8.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   367.35  15.7.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   361.45.18   28.6.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   367.27  13.6.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   361.45.11   24.5.2016
  Linux x64 (AMD64/EM64T) Display Driver BETA   367.18  19.5.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   364.19  22.4.2016
  Linux x64 (AMD64/EM64T) Display Driver BETA   364.15  6.4.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   361.42  30.3.2016
  Linux x64 (AMD64/EM64T) Display Driver BETA   364.12  21.3.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   361.28  9.2.2016
  Linux x64 (AMD64/EM64T) Display Driver Recommandé par NVIDIA   352.79  25.1.2016

 


jessie supporte le 340.xx et le 367.xx dans les backports

stretch supporte le 375.26

donc l installation a partir des dépots debian stretch devrait fonctionner , avec la version 375.26

ps: prend ton temps ,ce genre de problème pas évident a résoudre , je suis pas forcément sur la bonne voie , l utilisation du gpu intel va nous confirmer mes doutes .

ps: pense a mettre a jour "stretch" régulièrement , le gel complet est pour bientot. (Février 2017)

#23 10-01-2017 19:20:59

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

pas de plantage depuis le retrait de la carte vidéo smile

par contre j'arrive avec de nouvelles erreurs du côté de chez Intel

journalctl -r -p err



-- Logs begin at Tue 2017-01-10 12:39:19 CET, end at Tue 2017-01-10 19:15:14 CET. --
janv. 10 18:47:51 station kernel: [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
janv. 10 18:47:51 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:47:51 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:47:51 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:47:51 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:47:51 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:47:51 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:47:51 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:08:45 station kernel: [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
janv. 10 18:08:45 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:08:45 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:08:45 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:08:45 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:08:45 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:08:45 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 18:08:45 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 16:12:18 station kernel: [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
janv. 10 16:12:18 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 16:12:18 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 16:12:18 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 16:12:18 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 16:12:18 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 16:12:18 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 16:12:18 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 14:21:01 station kernel: [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
janv. 10 14:21:01 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 14:21:01 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 14:21:01 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 14:21:01 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 14:21:01 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 14:21:01 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 14:21:01 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:57:05 station kernel: [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
janv. 10 13:57:05 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:57:05 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:57:05 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:57:05 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:57:05 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:57:05 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:57:05 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:25:55 station kernel: [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
janv. 10 13:25:55 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:25:55 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:25:55 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:25:55 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:25:55 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
janv. 10 13:25:55 station kernel: [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
 




nano /var/log/Xorg.0.log


[     3.232]
X.Org X Server 1.19.0
Release Date: 2016-11-15
[     3.232] X Protocol Version 11, Revision 0
[     3.232] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     3.232] Current Operating System: Linux station 4.8.0-2-amd64 #1 SMP Debian 4.8.11-1 (2016-12-02) x86_64
[     3.232] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-2-amd64 root=UUID=8cb1de98-1e8c-4f73-8606-2e80612bbb8a ro quiet splash elevator=noop
[     3.232] Build Date: 16 December 2016  07:30:27PM
[     3.232] xorg-server 2:1.19.0-3 (https://www.debian.org/support)
[     3.232] Current version of pixman: 0.34.0
[     3.232]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     3.232] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.232] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 10 12:39:20 2017
[     3.234] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.234] (==) No Layout section.  Using the first Screen section.
[     3.234] (==) No screen section available. Using defaults.
[     3.234] (**) |-->Screen "Default Screen Section" (0)
[     3.234] (**) |   |-->Monitor "<default monitor>"
[     3.235] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     3.235] (==) Automatically adding devices
[     3.235] (==) Automatically enabling devices
[     3.235] (==) Automatically adding GPU devices
[     3.235] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.237] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.237]  Entry deleted from font path.
[     3.239] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     3.239] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.239] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.239] (II) Loader magic: 0x55d78da7de00
[     3.239] (II) Module ABI versions:
[     3.239]  X.Org ANSI C Emulation: 0.4
[     3.239]  X.Org Video Driver: 23.0
[     3.239]  X.Org XInput driver : 24.1
[     3.239]  X.Org Server Extension : 10.0
[     3.239] (++) using VT number 7

[     3.239] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.239] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.364] (--) PCI:*(0:0:2:0) 8086:1912:1043:8694 rev 6, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     3.364] (II) LoadModule: "glx"
[     3.365] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.370] (II) Module glx: vendor="X.Org Foundation"
[     3.370]  compiled for 1.19.0, module version = 1.0.0
[     3.370]  ABI class: X.Org Server Extension, version 10.0
[     3.370] (==) Matched modesetting as autoconfigured driver 0
[     3.370] (==) Matched fbdev as autoconfigured driver 1
[     3.370] (==) Matched vesa as autoconfigured driver 2
[     3.370] (==) Assigned the driver to the xf86ConfigLayout
[     3.370] (II) LoadModule: "modesetting"
[     3.371] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.372] (II) Module modesetting: vendor="X.Org Foundation"
[     3.372]  compiled for 1.19.0, module version = 1.19.0
[     3.372]  Module class: X.Org Video Driver
[     3.372]  ABI class: X.Org Video Driver, version 23.0
[     3.372] (II) LoadModule: "fbdev"
[     3.372] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.372] (II) Module fbdev: vendor="X.Org Foundation"
[     3.372]  compiled for 1.19.0, module version = 0.4.4
[     3.372]  Module class: X.Org Video Driver
[     3.372]  ABI class: X.Org Video Driver, version 23.0
[     3.372] (II) LoadModule: "vesa"
[     3.372] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.373] (II) Module vesa: vendor="X.Org Foundation"
[     3.373]  compiled for 1.19.0, module version = 2.3.4
[     3.373]  Module class: X.Org Video Driver
[     3.373]  ABI class: X.Org Video Driver, version 23.0
[     3.373] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.373] (II) FBDEV: driver for framebuffer: fbdev
[     3.373] (II) VESA: driver for VESA chipsets: vesa
[     3.405] (II) modeset(0): using drv /dev/dri/card0
[     3.405] (WW) Falling back to old probe method for fbdev
[     3.405] (II) Loading sub module "fbdevhw"
[     3.405] (II) LoadModule: "fbdevhw"
[     3.406] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.406] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.406]  compiled for 1.19.0, module version = 0.0.2
[     3.406]  ABI class: X.Org Video Driver, version 23.0
[     3.406] (WW) Falling back to old probe method for vesa
[     3.406] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     3.406] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     3.406] (==) modeset(0): RGB weight 888
[     3.406] (==) modeset(0): Default visual is TrueColor
[     3.406] (II) Loading sub module "glamoregl"
[     3.406] (II) LoadModule: "glamoregl"
[     3.406] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     3.412] (II) Module glamoregl: vendor="X.Org Foundation"
[     3.412]  compiled for 1.19.0, module version = 1.0.0
[     3.412]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.412] (II) glamor: OpenGL accelerated X.org driver based.
[     3.435] (II) glamor: EGL version 1.4 (DRI2):
[     3.447] (II) modeset(0): glamor initialized
[     3.447] (II) modeset(0): Output eDP-1 has no monitor section
[     3.448] (II) modeset(0): Output HDMI-1 has no monitor section
[     3.450] (II) modeset(0): Output DP-1 has no monitor section
[     3.450] (II) modeset(0): EDID for output eDP-1
[     3.450] (II) modeset(0): Manufacturer: NEC  Model: 6659  Serial#: 16843009
[     3.450] (II) modeset(0): Year: 2004  Week: 46
[     3.450] (II) modeset(0): EDID Version: 1.4
[     3.450] (II) modeset(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[     3.450] (II) modeset(0): Sync:  Separate
[     3.450] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[     3.450] (II) modeset(0): Gamma: 2.20
[     3.450] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     3.450] (II) modeset(0): First detailed timing is preferred mode
[     3.450] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     3.450] (II) modeset(0): redX: 0.640 redY: 0.332   greenX: 0.296 greenY: 0.600
[     3.450] (II) modeset(0): blueX: 0.144 blueY: 0.091   whiteX: 0.312 whiteY: 0.333
[     3.450] (II) modeset(0): Supported established timings:
[     3.450] (II) modeset(0): 720x400@70Hz
[     3.450] (II) modeset(0): 640x480@60Hz
[     3.450] (II) modeset(0): 640x480@67Hz
[     3.450] (II) modeset(0): 640x480@72Hz
[     3.450] (II) modeset(0): 640x480@75Hz
[     3.450] (II) modeset(0): 800x600@56Hz
[     3.450] (II) modeset(0): 800x600@60Hz
[     3.450] (II) modeset(0): 800x600@72Hz
[     3.450] (II) modeset(0): 800x600@75Hz
[     3.450] (II) modeset(0): 832x624@75Hz
[     3.450] (II) modeset(0): 1024x768@60Hz
[     3.450] (II) modeset(0): 1024x768@70Hz
[     3.450] (II) modeset(0): 1024x768@75Hz
[     3.450] (II) modeset(0): 1280x1024@75Hz
[     3.450] (II) modeset(0): 1152x864@75Hz
[     3.450] (II) modeset(0): Manufacturer's mask: 0
[     3.450] (II) modeset(0): Supported standard timings:
[     3.450] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     3.450] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     3.450] (II) modeset(0): Supported detailed timing:
[     3.450] (II) modeset(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[     3.450] (II) modeset(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     3.450] (II) modeset(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     3.450] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[     3.450] (II) modeset(0): Monitor name: LCD72VM
[     3.450] (II) modeset(0): Serial No: 4Y149770NB
[     3.450] (II) modeset(0): EDID (in hex):
[     3.450] (II) modeset(0):   00ffffffffffff0038a3596601010101
[     3.450] (II) modeset(0):   2e0e010408221b78eacedda3554b9924
[     3.450] (II) modeset(0):   174f55bfef80714f8180010101010101
[     3.451] (II) modeset(0):   010101010101302a009851002a403070
[     3.451] (II) modeset(0):   1300520e1100001e000000fd00384b1f
[     3.451] (II) modeset(0):   510e000a202020202020000000fc004c
[     3.451] (II) modeset(0):   43443732564d0a2020202020000000ff
[     3.451] (II) modeset(0):   0034593134393737304e420a20200041
[     3.451] (II) modeset(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[     3.451] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
[     3.451] (II) modeset(0): Printing probed modes for output eDP-1
[     3.451] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     3.451] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     3.451] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     3.451] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     3.451] (II) modeset(0): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 868 902 -hsync +vsync (67.6 kHz d)
[     3.451] (II) modeset(0): Modeline "1152x864"x70.0   96.77  1152 1224 1344 1536  864 865 868 900 -hsync +vsync (63.0 kHz d)
[     3.451] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[     3.451] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     3.451] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     3.451] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     3.451] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     3.451] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     3.451] (II) modeset(0): Modeline "928x696"x75.0  144.00  928 992 1104 1280  696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
[     3.451] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     3.451] (II) modeset(0): Modeline "896x672"x75.0  130.50  896 944 1052 1228  672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[     3.451] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     3.451] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     3.451] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     3.451] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     3.451] (II) modeset(0): Modeline "800x600"x75.0  101.25  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[     3.451] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[     3.451] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[     3.451] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     3.451] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     3.451] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     3.451] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     3.451] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     3.451] (II) modeset(0): Modeline "840x525"x75.0   93.50  840 900 988 1136  525 526 529 549 doublescan -hsync +vsync (82.3 kHz d)
[     3.451] (II) modeset(0): Modeline "840x525"x69.9   87.00  840 900 988 1136  525 526 529 548 doublescan -hsync +vsync (76.6 kHz d)
[     3.451] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     3.451] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     3.451] (II) modeset(0): Modeline "800x512"x60.2   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[     3.451] (II) modeset(0): Modeline "700x525"x74.8   77.90  700 732 892 956  525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[     3.451] (II) modeset(0): Modeline "700x525"x70.1   72.53  700 748 824 948  525 525 527 546 doublescan -hsync +vsync (76.5 kHz d)
[     3.451] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     3.451] (II) modeset(0): Modeline "640x512"x75.0   67.50  640 648 720 844  512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[     3.451] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     3.451] (II) modeset(0): Modeline "720x450"x59.9   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[     3.451] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     3.451] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     3.451] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     3.451] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz d)
[     3.451] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     3.451] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     3.451] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     3.451] (II) modeset(0): Modeline "680x384"x59.8   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[     3.451] (II) modeset(0): Modeline "680x384"x60.0   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[     3.451] (II) modeset(0): Modeline "576x432"x75.0   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[     3.451] (II) modeset(0): Modeline "576x432"x75.0   52.49  576 612 676 776  432 432 434 451 doublescan -hsync +vsync (67.6 kHz d)
[     3.451] (II) modeset(0): Modeline "576x432"x70.0   48.38  576 612 672 768  432 432 434 450 doublescan -hsync +vsync (63.0 kHz d)
[     3.451] (II) modeset(0): Modeline "576x432"x60.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[     3.451] (II) modeset(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[     3.451] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[     3.451] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     3.451] (II) modeset(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[     3.451] (II) modeset(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[     3.451] (II) modeset(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[     3.451] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     3.451] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     3.451] (II) modeset(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[     3.451] (II) modeset(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[     3.451] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     3.452] (II) modeset(0): EDID for output HDMI-1
[     3.453] (II) modeset(0): EDID for output DP-1
[     3.453] (II) modeset(0): Manufacturer: NEC  Model: 6659  Serial#: 16843009
[     3.453] (II) modeset(0): Year: 2004  Week: 46
[     3.453] (II) modeset(0): EDID Version: 1.4
[     3.453] (II) modeset(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[     3.453] (II) modeset(0): Sync:  Separate
[     3.453] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[     3.453] (II) modeset(0): Gamma: 2.20
[     3.453] (II) modeset(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[     3.453] (II) modeset(0): First detailed timing is preferred mode
[     3.453] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     3.453] (II) modeset(0): redX: 0.640 redY: 0.332   greenX: 0.296 greenY: 0.600
[     3.453] (II) modeset(0): blueX: 0.144 blueY: 0.091   whiteX: 0.312 whiteY: 0.333
[     3.453] (II) modeset(0): Supported established timings:
[     3.453] (II) modeset(0): 720x400@70Hz
[     3.453] (II) modeset(0): 640x480@60Hz
[     3.453] (II) modeset(0): 640x480@67Hz
[     3.453] (II) modeset(0): 640x480@72Hz
[     3.453] (II) modeset(0): 640x480@75Hz
[     3.453] (II) modeset(0): 800x600@56Hz
[     3.453] (II) modeset(0): 800x600@60Hz
[     3.453] (II) modeset(0): 800x600@72Hz
[     3.453] (II) modeset(0): 800x600@75Hz
[     3.453] (II) modeset(0): 832x624@75Hz
[     3.453] (II) modeset(0): 1024x768@60Hz
[     3.453] (II) modeset(0): 1024x768@70Hz
[     3.453] (II) modeset(0): 1024x768@75Hz
[     3.453] (II) modeset(0): 1280x1024@75Hz
[     3.453] (II) modeset(0): 1152x864@75Hz
[     3.453] (II) modeset(0): Manufacturer's mask: 0
[     3.453] (II) modeset(0): Supported standard timings:
[     3.453] (II) modeset(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[     3.453] (II) modeset(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[     3.453] (II) modeset(0): Supported detailed timing:
[     3.453] (II) modeset(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[     3.453] (II) modeset(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[     3.453] (II) modeset(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[     3.453] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[     3.453] (II) modeset(0): Monitor name: LCD72VM
[     3.453] (II) modeset(0): Serial No: 4Y149770NB
[     3.453] (II) modeset(0): EDID (in hex):
[     3.453] (II) modeset(0):   00ffffffffffff0038a3596601010101
[     3.453] (II) modeset(0):   2e0e010408221b78eacedda3554b9924
[     3.453] (II) modeset(0):   174f55bfef80714f8180010101010101
[     3.453] (II) modeset(0):   010101010101302a009851002a403070
[     3.454] (II) modeset(0):   1300520e1100001e000000fd00384b1f
[     3.454] (II) modeset(0):   510e000a202020202020000000fc004c
[     3.454] (II) modeset(0):   43443732564d0a2020202020000000ff
[     3.454] (II) modeset(0):   0034593134393737304e420a20200041
[     3.454] (II) modeset(0): Printing probed modes for output DP-1
[     3.454] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[     3.454] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[     3.454] (II) modeset(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[     3.454] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[     3.454] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[     3.454] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[     3.454] (II) modeset(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[     3.454] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[     3.454] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[     3.454] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[     3.454] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[     3.454] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[     3.454] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[     3.454] (II) modeset(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[     3.454] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[     3.454] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[     3.454] (II) modeset(0): Output eDP-1 connected
[     3.454] (II) modeset(0): Output HDMI-1 disconnected
[     3.454] (II) modeset(0): Output DP-1 connected
[     3.454] (II) modeset(0): Using spanning desktop for initial modes
[     3.454] (II) modeset(0): Output eDP-1 using initial mode 1280x1024 +0+0
[     3.454] (II) modeset(0): Output DP-1 using initial mode 1280x1024 +1280+0
[     3.454] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.454] (==) modeset(0): DPI set to (96, 96)
[     3.454] (II) Loading sub module "fb"
[     3.454] (II) LoadModule: "fb"
[     3.454] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.456] (II) Module fb: vendor="X.Org Foundation"
[     3.456]  compiled for 1.19.0, module version = 1.0.0
[     3.456]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.456] (II) UnloadModule: "fbdev"
[     3.456] (II) Unloading fbdev
[     3.456] (II) UnloadSubModule: "fbdevhw"
[     3.456] (II) Unloading fbdevhw
[     3.456] (II) UnloadModule: "vesa"
[     3.456] (II) Unloading vesa
[     3.456] (==) Depth 24 pixmap format is 32 bpp
[     3.523] (==) modeset(0): Backing store enabled
[     3.523] (==) modeset(0): Silken mouse enabled
[     3.523] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     3.524] (==) modeset(0): DPMS enabled
[     3.524] (II) modeset(0): [DRI2] Setup complete
[     3.524] (II) modeset(0): [DRI2]   DRI driver: i965
[     3.524] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     3.524] (--) RandR disabled
[     3.526] (II) SELinux: Disabled on system
[     3.530] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     3.530] (II) AIGLX: enabled GLX_ARB_create_context
[     3.530] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     3.530] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     3.530] (II) AIGLX: enabled GLX_INTEL_swap_event
[     3.530] (II) AIGLX: enabled GLX_SGI_swap_control
[     3.530] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     3.530] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     3.530] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     3.530] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     3.530] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     3.530] (II) AIGLX: Loaded and initialized i965
[     3.530] (II) GLX: Initialized DRI2 GL provider for screen 0
[     3.533] (II) modeset(0): Damage tracking initialized
[     3.533] (II) modeset(0): Setting screen physical size to 677 x 270
[     3.563] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     3.563] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     3.563] (II) LoadModule: "libinput"
[     3.563] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     3.566] (II) Module libinput: vendor="X.Org Foundation"
[     3.566]  compiled for 1.19.0, module version = 0.23.0
[     3.566]  Module class: X.Org XInput Driver
[     3.566]  ABI class: X.Org XInput driver, version 24.1
[     3.566] (II) Using input driver 'libinput' for 'Power Button'
[     3.566] (**) Power Button: always reports core events
[     3.566] (**) Option "Device" "/dev/input/event2"
[     3.566] (**) Option "_source" "server/udev"
[     3.566] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     3.566] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     3.776] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event2"
[     3.776] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     3.776] (**) Option "xkb_model" "pc105"
[     3.776] (**) Option "xkb_layout" "fr"
[     3.776] (**) Option "xkb_variant" "latin9"
[     3.787] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[     3.787] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[     3.787] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     3.787] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     3.787] (II) Using input driver 'libinput' for 'Video Bus'
[     3.787] (**) Video Bus: always reports core events
[     3.787] (**) Option "Device" "/dev/input/event5"
[     3.787] (**) Option "_source" "server/udev"
[     3.788] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     3.788] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     3.816] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8/event5"
[     3.816] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     3.816] (**) Option "xkb_model" "pc105"
[     3.816] (**) Option "xkb_layout" "fr"
[     3.816] (**) Option "xkb_variant" "latin9"
[     3.816] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     3.816] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     3.817] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     3.817] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     3.817] (II) Using input driver 'libinput' for 'Power Button'
[     3.817] (**) Power Button: always reports core events
[     3.817] (**) Option "Device" "/dev/input/event1"
[     3.817] (**) Option "_source" "server/udev"
[     3.817] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     3.817] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     3.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event1"
[     3.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     3.840] (**) Option "xkb_model" "pc105"
[     3.840] (**) Option "xkb_layout" "fr"
[     3.840] (**) Option "xkb_variant" "latin9"
[     3.840] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[     3.840] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[     3.840] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     3.840] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     3.840] (II) Using input driver 'libinput' for 'Sleep Button'
[     3.840] (**) Sleep Button: always reports core events
[     3.840] (**) Option "Device" "/dev/input/event0"
[     3.840] (**) Option "_source" "server/udev"
[     3.841] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[     3.841] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[     3.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event0"
[     3.856] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     3.856] (**) Option "xkb_model" "pc105"
[     3.856] (**) Option "xkb_layout" "fr"
[     3.856] (**) Option "xkb_variant" "latin9"
[     3.856] (II) input device 'Sleep Button', /dev/input/event0 is tagged by udev as: Keyboard
[     3.856] (II) input device 'Sleep Button', /dev/input/event0 is a keyboard
[     3.857] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event17)
[     3.857] (**) Logitech Optical USB Mouse: Applying InputClass "libinput pointer catchall"
[     3.857] (II) Using input driver 'libinput' for 'Logitech Optical USB Mouse'
[     3.857] (**) Logitech Optical USB Mouse: always reports core events
[     3.857] (**) Option "Device" "/dev/input/event17"
[     3.857] (**) Option "_source" "server/udev"
[     3.857] (II) input device 'Logitech Optical USB Mouse', /dev/input/event17 is tagged by udev as: Mouse
[     3.857] (II) Device 'Logitech Optical USB Mouse' set to 400 DPI
[     3.857] (II) input device 'Logitech Optical USB Mouse', /dev/input/event17 is a pointer caps
[     3.892] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-1/3-1:1.0/0003:046D:C016.0001/input/input20/event17"
[     3.892] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 10)
[     3.892] (**) Option "AccelerationScheme" "none"
[     3.892] (**) Logitech Optical USB Mouse: (accel) selected scheme none/0
[     3.892] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[     3.892] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[     3.892] (II) input device 'Logitech Optical USB Mouse', /dev/input/event17 is tagged by udev as: Mouse
[     3.892] (II) Device 'Logitech Optical USB Mouse' set to 400 DPI
[     3.892] (II) input device 'Logitech Optical USB Mouse', /dev/input/event17 is a pointer caps
[     3.893] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[     3.893] (II) No input driver specified, ignoring this device.
[     3.893] (II) This device may have been added with another device file.
[     3.894] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/event18)
[     3.894] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput keyboard catchall"
[     3.894] (II) Using input driver 'libinput' for 'GASIA PS2toUSB Adapter'
[     3.894] (**) GASIA PS2toUSB Adapter: always reports core events
[     3.894] (**) Option "Device" "/dev/input/event18"
[     3.894] (**) Option "_source" "server/udev"
[     3.894] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event18 is tagged by udev as: Keyboard
[     3.894] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event18 is a keyboard
[     3.932] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-2/3-2:1.0/0003:0E8F:0020.0002/input/input21/event18"
[     3.932] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: KEYBOARD, id 11)
[     3.932] (**) Option "xkb_model" "pc105"
[     3.932] (**) Option "xkb_layout" "fr"
[     3.932] (**) Option "xkb_variant" "latin9"
[     3.932] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event18 is tagged by udev as: Keyboard
[     3.932] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event18 is a keyboard
[     3.933] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/event19)
[     3.933] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput pointer catchall"
[     3.933] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput keyboard catchall"
[     3.933] (II) Using input driver 'libinput' for 'GASIA PS2toUSB Adapter'
[     3.933] (**) GASIA PS2toUSB Adapter: always reports core events
[     3.933] (**) Option "Device" "/dev/input/event19"
[     3.933] (**) Option "_source" "server/udev"
[     3.933] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event19 is tagged by udev as: Keyboard Mouse
[     3.933] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event19 is a pointer caps
[     3.933] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event19 is a keyboard
[     3.992] (II) libinput: GASIA PS2toUSB Adapter: needs a virtual subdevice
[     3.992] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-2/3-2:1.1/0003:0E8F:0020.0003/input/input22/event19"
[     3.992] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: MOUSE, id 12)
[     3.992] (**) Option "AccelerationScheme" "none"
[     3.992] (**) GASIA PS2toUSB Adapter: (accel) selected scheme none/0
[     3.992] (**) GASIA PS2toUSB Adapter: (accel) acceleration factor: 2.000
[     3.992] (**) GASIA PS2toUSB Adapter: (accel) acceleration threshold: 4
[     3.992] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event19 is tagged by udev as: Keyboard Mouse
[     3.992] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event19 is a pointer caps
[     3.992] (II) input device 'GASIA PS2toUSB Adapter', /dev/input/event19 is a keyboard
[     3.993] (II) config/udev: Adding input device GASIA PS2toUSB Adapter (/dev/input/mouse1)
[     3.993] (II) No input driver specified, ignoring this device.
[     3.993] (II) This device may have been added with another device file.
[     3.993] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
[     3.993] (II) No input driver specified, ignoring this device.
[     3.993] (II) This device may have been added with another device file.
[     3.993] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[     3.993] (II) No input driver specified, ignoring this device.
[     3.993] (II) This device may have been added with another device file.
[     3.994] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[     3.994] (II) No input driver specified, ignoring this device.
[     3.994] (II) This device may have been added with another device file.
[     3.994] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[     3.994] (II) No input driver specified, ignoring this device.
[     3.994] (II) This device may have been added with another device file.
[     3.994] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event11)
[     3.994] (II) No input driver specified, ignoring this device.
[     3.994] (II) This device may have been added with another device file.
[     3.994] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event12)
[     3.994] (II) No input driver specified, ignoring this device.
[     3.994] (II) This device may have been added with another device file.
[     3.994] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[     3.995] (II) No input driver specified, ignoring this device.
[     3.995] (II) This device may have been added with another device file.
[     3.995] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[     3.995] (II) No input driver specified, ignoring this device.
[     3.995] (II) This device may have been added with another device file.
[     3.995] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[     3.995] (II) No input driver specified, ignoring this device.
[     3.995] (II) This device may have been added with another device file.
[     3.995] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[     3.995] (II) No input driver specified, ignoring this device.
[     3.995] (II) This device may have been added with another device file.
[     3.995] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[     3.995] (II) No input driver specified, ignoring this device.
[     3.995] (II) This device may have been added with another device file.
[     3.996] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[     3.996] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     3.996] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     3.996] (**) Eee PC WMI hotkeys: always reports core events
[     3.996] (**) Option "Device" "/dev/input/event4"
[     3.996] (**) Option "_source" "server/udev"
[     3.996] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     3.996] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[     4.020] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"
[     4.020] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[     4.020] (**) Option "xkb_model" "pc105"
[     4.020] (**) Option "xkb_layout" "fr"
[     4.020] (**) Option "xkb_variant" "latin9"
[     4.020] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is tagged by udev as: Keyboard
[     4.020] (II) input device 'Eee PC WMI hotkeys', /dev/input/event4 is a keyboard
[     4.020] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[     4.020] (II) No input driver specified, ignoring this device.
[     4.020] (II) This device may have been added with another device file.
[     4.021] (II) config/udev: Adding input device lircd-uinput (/dev/input/event20)
[     4.021] (**) lircd-uinput: Applying InputClass "libinput keyboard catchall"
[     4.021] (II) Using input driver 'libinput' for 'lircd-uinput'
[     4.021] (**) lircd-uinput: always reports core events
[     4.021] (**) Option "Device" "/dev/input/event20"
[     4.021] (**) Option "_source" "server/udev"
[     4.021] (II) input device 'lircd-uinput', /dev/input/event20 is tagged by udev as: Keyboard
[     4.021] (II) input device 'lircd-uinput', /dev/input/event20 is a keyboard
[     4.052] (**) Option "config_info" "udev:/sys/devices/virtual/input/input23/event20"
[     4.052] (II) XINPUT: Adding extended input device "lircd-uinput" (type: KEYBOARD, id 14)
[     4.052] (**) Option "xkb_model" "pc105"
[     4.052] (**) Option "xkb_layout" "fr"
[     4.052] (**) Option "xkb_variant" "latin9"
[     4.052] (II) input device 'lircd-uinput', /dev/input/event20 is tagged by udev as: Keyboard
[     4.052] (II) input device 'lircd-uinput', /dev/input/event20 is a keyboard
[     4.065] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput pointer catchall"
[     4.065] (**) GASIA PS2toUSB Adapter: Applying InputClass "libinput keyboard catchall"
[     4.065] (II) Using input driver 'libinput' for 'GASIA PS2toUSB Adapter'
[     4.065] (**) GASIA PS2toUSB Adapter: always reports core events
[     4.065] (**) Option "Device" "/dev/input/event19"
[     4.065] (**) Option "_source" "_driver/libinput"
[     4.065] (II) libinput: GASIA PS2toUSB Adapter: is a virtual subdevice
[     4.065] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/usb3/3-2/3-2:1.1/0003:0E8F:0020.0003/input/input22/event19"
[     4.065] (II) XINPUT: Adding extended input device "GASIA PS2toUSB Adapter" (type: KEYBOARD, id 15)
[     4.065] (**) Option "xkb_model" "pc105"
[     4.065] (**) Option "xkb_layout" "fr"
[     4.065] (**) Option "xkb_variant" "latin9"
[    11.062] (II) modeset(0): EDID vendor "NEC", prod id 26201
[    11.062] (II) modeset(0): Using EDID range info for horizontal sync
[    11.062] (II) modeset(0): Using EDID range info for vertical refresh
[    11.062] (II) modeset(0): Printing DDC gathered Modelines:
[    11.062] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    11.062] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    11.062] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    11.062] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    11.062] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    11.062] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    11.062] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    11.062] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    11.062] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    11.062] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    11.062] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    11.062] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    11.062] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    11.062] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    11.062] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    11.062] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    11.153] (II) modeset(0): Allocate new frame buffer 1280x1024 stride
[    11.264] (II) modeset(0): EDID vendor "NEC", prod id 26201
[    11.264] (II) modeset(0): Using hsync ranges from config file
[    11.264] (II) modeset(0): Using vrefresh ranges from config file
[    11.264] (II) modeset(0): Printing DDC gathered Modelines:
[    11.264] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    11.264] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    11.264] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    11.264] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    11.264] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    11.264] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    11.264] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    11.264] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    11.264] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    11.264] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    11.264] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    11.264] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    11.264] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    11.264] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    11.264] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    11.264] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    11.268] (II) modeset(0): EDID vendor "NEC", prod id 26201
[    11.268] (II) modeset(0): Using hsync ranges from config file
[    11.268] (II) modeset(0): Using vrefresh ranges from config file
[    11.268] (II) modeset(0): Printing DDC gathered Modelines:
[    11.268] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    11.268] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    11.268] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    11.268] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    11.268] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    11.268] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    11.268] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    11.268] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    11.268] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    11.268] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    11.268] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    11.268] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    11.268] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    11.268] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    11.268] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    11.268] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    11.271] (II) modeset(0): EDID vendor "NEC", prod id 26201
[    11.271] (II) modeset(0): Using hsync ranges from config file
[    11.271] (II) modeset(0): Using vrefresh ranges from config file
[    11.271] (II) modeset(0): Printing DDC gathered Modelines:
[    11.271] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    11.271] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    11.271] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    11.271] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    11.271] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    11.271] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    11.271] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    11.271] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    11.271] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    11.271] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    11.271] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    11.271] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    11.271] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    11.271] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    11.271] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    11.271] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    11.274] (II) modeset(0): EDID vendor "NEC", prod id 26201
[    11.274] (II) modeset(0): Using hsync ranges from config file
[    11.274] (II) modeset(0): Using vrefresh ranges from config file
[    11.274] (II) modeset(0): Printing DDC gathered Modelines:
[    11.274] (II) modeset(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    11.274] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    11.274] (II) modeset(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    11.274] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    11.274] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    11.274] (II) modeset(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    11.274] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    11.274] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    11.274] (II) modeset(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    11.274] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    11.274] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    11.274] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    11.274] (II) modeset(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    11.274] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    11.274] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    11.274] (II) modeset(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
 

Dernière modification par totophe56 (10-01-2017 19:22:15)

Hors ligne

#24 10-01-2017 19:38:39

anonyme
Invité

Re : freeze incompréhensibles - stretch [resolu]

j'ai eu ce problème avec certaines cartes , pas d explication j'ai changé la carte (impossible de jouer par exemple en 1024x768 mais mon bureau était en 1024x768 )


[     3.451] (II) modeset(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
[     3.451] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
 


le driver chargé est KMS (kernel mode setting ) tout a l'air correct mais les messages d'erreurs pas normal


[     3.373] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.405] (II) modeset(0): using drv /dev/dri/card0
 


a priori tu n a pas le paquet intel installé (xserver-xorg-video-intel) et peut etre d'autres , mais bon si on utilise le driver nvidia pas la peine de configurer ceci . (la carte sera désactivé )


[     3.456] (II) UnloadModule: "fbdev"
[     3.456] (II) Unloading fbdev
[     3.456] (II) UnloadSubModule: "fbdevhw"
[     3.456] (II) Unloading fbdevhw
[     3.456] (II) UnloadModule: "vesa"
[     3.456] (II) Unloading vesa
 



le wiki nvidia => https://debian-facile.org/doc:materiel: … ia:accueil

la commande a faire :
en simulation


apt-get -s install nvidia-kernel-dkms nvidia-settings nvidia-driver linux-headers-$(uname -r)
 


il te faut un sources.list avec "contrib non-free" a la fin des lignes
pour faire l installation enlever le "-s"


apt-get install nvidia-kernel-dkms nvidia-settings nvidia-driver linux-headers-$(uname -r)
 


le problème il ne faudrait pas que ça bug pendant l installation
donc pas de précipitation .
Pour tromper le systeme , faire l installation du driver nonfree nvidia avec le gpu intel ,
puis stopper  la machine , couper l alimentation , remettre la carte nvidia ,
puis démarrer , modifier le bios (enlever auto et choisir PCIe ) , continuer le démarrage et ça devrait etre bon .
voila me dire si tu a tout compris ?

nota : faire une simulation avant (sous intel ) voir si tout va bien (avec le -s devant install )
ça va te donner la liste des paquets installés et si tout va bien
ne pas oublier de faire un "apt-get update" avant (mais après la modification du sources.list ) et de faire les mises a jours en attente et redémarrer si nécessaire .
le sources.list qu il te faut


deb http://ftp.fr.debian.org/debian/ stretch main contrib non-free
deb http://security.debian.org/ stretch/updates main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
 

Dernière modification par anonyme (10-01-2017 20:10:37)

#25 12-01-2017 23:54:43

totophe56
Membre
Distrib. : Buster 64 bits
Noyau : Linux 5.10.0-20-amd64
(G)UI : KDE
Inscription : 22-07-2010

Re : freeze incompréhensibles - stretch [resolu]

2 jours sans freeze, je vais me jeter à l'eau demain je pense big_smile

Hors ligne

Pied de page des forums