Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 22-01-2017 17:56:00

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

TouchPad non reconnu

Hello world,

Alors, il s'agit d'un TouchPad synaptics (SMBus) bien reconnu par windows 10 (en dual boot, no comment smile). L'ordi c'est un portable essentielB smart mouv 1506, j'y ai installé Debian la semaine dernière et depuis j'erre et j'erre et j'erre.

egrep -i 'synap|alps|etps' /proc/bus/input/devices



ne renvoie rien

xinput --list



annonce :

⎡ Virtual core pointer                      id=2  [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4  [slave  pointer  (2)]
⎜   ↳ HID 062a:0000                             id=10 [slave  pointer  (2)]
⎣ Virtual core keyboard                     id=3  [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5  [slave  keyboard (3)]
    ↳ Power Button                              id=6  [slave  keyboard (3)]
    ↳ Video Bus                                 id=7  [slave  keyboard (3)]
    ↳ Power Button                              id=8  [slave  keyboard (3)]
    ↳ Sleep Button                              id=9  [slave  keyboard (3)]
    ↳ USB Camera                                id=11 [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard              id=12 [slave  keyboard (3)]



détails:

xinput --list-props 10



Device 'HID 062a:0000':
  Device Enabled (133): 1
  Coordinate Transformation Matrix (135): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
  Device Accel Profile (259): 0
  Device Accel Constant Deceleration (260): 1.000000
  Device Accel Adaptive Deceleration (261): 1.000000
  Device Accel Velocity Scaling (262)10.000000
  Device Product ID (254)1578, 0
  Device Node (255)"/dev/input/event1"
  Evdev Axis Inversion (263): 0, 0
  Evdev Axes Swap (265)0
  Axis Labels (266)"Rel X" (143), "Rel Y" (144), "Rel Vert Wheel" (258)
  Button Labels (267)"Button Left" (136), "Button Middle" (137), "Button Right" (138), "Button Wheel Up" (139), "Button Wheel Down" (140), "Button Horiz Wheel Left" (141), "Button Horiz Wheel Right" (142)
  Evdev Scrolling Distance (268): 1, 1, 1
  Evdev Middle Button Emulation (269)0
  Evdev Middle Button Timeout (270)50
  Evdev Third Button Emulation (271): 0
  Evdev Third Button Emulation Timeout (272): 1000
  Evdev Third Button Emulation Button (273)3
  Evdev Third Button Emulation Threshold (274): 20
  Evdev Wheel Emulation (275)0
  Evdev Wheel Emulation Axes (276): 0, 0, 4, 5
  Evdev Wheel Emulation Inertia (277)10
  Evdev Wheel Emulation Timeout (278)200
  Evdev Wheel Emulation Button (279): 4
  Evdev Drag Lock Buttons (280)0



le(s) driver(s) :

grep -e "Using input driver " /var/log/Xorg.0.log




[    26.642] (II) Using input driver 'evdev' for 'Power Button'
[    26.773] (II) Using input driver 'evdev' for 'Video Bus'
[    26.775] (II) Using input driver 'evdev' for 'Power Button'
[    26.778] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.781] (II) Using input driver 'evdev' for 'HID 062a:0000'
[    26.851] (II) Using input driver 'evdev' for 'USB Camera'
[    26.857] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   442.212] (II) Using input driver 'evdev' for 'HID 062a:0000'



Un peu monotone smile

Je suis passé d'un noyau 3.16 à 4.8 mais ça n'a rien changé. Je précise que tout le reste marche bien, à l'exception du clic droit de la souris un peu erratique.

Help :-)

Hors ligne

#2 22-01-2017 19:04:05

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Hello Wob,

062a:0000 évoquerait volontiers un identifiant USB (Creative Labs Optical mouse ?) et 'clic droit de la souris un peu erratique' donnerait volontiers envie de voir la sortie de la commande 'lsusb' neutral

En ligne

#3 22-01-2017 19:30:33

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

Hmm, pas loin c'est une NGS optique de secours... d'ailleurs ça ne change rien qu'elle soit branchée ou pas. Je précise au passage qu'il n'y a pas de config particulière TouchPad dans le «BIOS» et que les paquets synaptics sont bien présents.

Bon je tenterai 'lsusb' quand la machine ne sera plus squattée par Yakari wink

Hors ligne

#4 22-01-2017 22:07:41

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

lsusb



Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 13d3:3410 IMC Networks
Bus 001 Device 004: ID 0bda:570b Realtek Semiconductor Corp.
Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



la souris débranchée, mon Jessie ne voit plus rien :

xinput --list



⎡ Virtual core pointer                      id=2  [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4  [slave  pointer  (2)]
⎣ Virtual core keyboard                     id=3  [master keyboard (2)]

idem etc.



les périphériques :

lspci



00:00.0 Host bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register (rev 0a)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display (rev 0a)
00:13.0 SATA controller: Intel Corporation Device 0f23 (rev 0a)
00:14.0 USB controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI (rev 0a)
00:1a.0 Encryption controller: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine (rev 0a)
00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0a)
00:1c.0 PCI bridge: Intel Corporation Device 0f48 (rev 0a)
00:1c.1 PCI bridge: Intel Corporation Device 0f4a (rev 0a)
00:1c.2 PCI bridge: Intel Corporation Device 0f4c (rev 0a)
00:1c.3 PCI bridge: Intel Corporation Device 0f4e (rev 0a)
00:1f.0 ISA bridge: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit (rev 0a)
00:1f.3 SMBus: Intel Corporation Device 0f12 (rev 0a)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter



des idées ?...

Hors ligne

#5 22-01-2017 23:11:11

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Bonsoir également,

Ok, on peut donc considérer que la sortie de la commande 'xinput --list-props' concernait la fameuse souris 'NGS optique de secours' ; rien concernant le pavé tactile, à part ça bien sûr :

00:1f.3 SMBus: Intel Corporation Device 0f12 (rev 0a)


Du coup, on aimerait bien voir la sortie de la commande :

lspci -nnk | grep SMBus -A 2


Le truc pas rassurant c'est que tu es déjà en 4.8... un fichier 50-synaptics.conf ?

En ligne

#6 23-01-2017 11:03:43

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

yop... et bonjour ;)

lspci -nnk | grep SMBus -A 2



00:1f.3 SMBus [0c05]: Intel Corporation Device [8086:0f12] (rev 0a)
  Subsystem: Pegatron Device [1b0a:2221]
  Kernel driver in use: i801_smbus



le 50-synaptics.conf (je vois pas de soucis, je colle tout des fois que)

# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
#   Option "OptionName" "value"
#

Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
#       MatchDevicePath "/dev/input/event*"
EndSection

Section "InputClass"
        Identifier "touchpad ignore duplicates"
        MatchIsTouchpad "on"
        MatchOS "Linux"
        MatchDevicePath "/dev/input/mouse*"
        Option "Ignore" "on"
EndSection

# This option enables the bottom right corner to be a right button on clickpads
# and the right and middle top areas to be right / middle buttons on clickpads
# with a top button area.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Default clickpad buttons"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
EndSection

# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Disable clickpad buttons on Apple touchpads"
        MatchProduct "Apple|bcm5974"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection



toujours rien de bien rassurant?... je vois pas où ça coince :( un driver exotique? Pegatron?...

Dernière modification par Wob (23-01-2017 11:28:28)

Hors ligne

#7 23-01-2017 14:24:24

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Hello !

Ce fichier 50-synaptics.conf est celui qui vient par défaut avec l'installation du paquet xserver-xorg-input-synaptics ; Pegatron est un OEM (dont on a entendu parler il y a quelques années), il s'agit probablement du constructeur de la carte mère.

Impossible, bien évidemment, de trouver une doc décente concernant l'ordinateur portable Smart'MOUV 1506... par contre la doc du Smart'MOUV 1501 précise que la combinaison de touches <Fn>+<F1> active/désactive le pavé tactile... Tu ne mentionnes pas le résultat de cette manip de base dans le message initial.

(À noter que le retour de la commande lsusb présente pas mal de similitudes avec celui obtenu sur un Medion Akoya E6240T -- un utilisateur de Kubuntu 14.04 avait également un petit souci de pavé tactile, entre autres, voir ici. La doc mentionne d'ailleurs un touchpad lock intégré au bidule.)

Dernière modification par èfpé (23-01-2017 14:32:32)

En ligne

#8 23-01-2017 16:13:29

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

re- èfpé !

Sur le 1506, le raccourci d'activation/désactivation c'est Fn+F9 et ça ne marche pas. Il y a en effet un petit bouton-voyant d'activation/désactivation du pad sur le pad même, ce qui est idiot puisque placé là il arrive régulièrement qu'on clique dessus par accident. Bref : oui j'ai commencé par vérifier tout ça dès le début big_smile

J'avais vu aussi le lien que tu donnes, mais ce qu'il dit n'a pas l'air très réjouissant, de ce que j'en comprends, je ne suis pas germanophone.

A propos de Pegatron, qu'est-ce que ça veut dire subsystem? Qu'est-ce qui pourrait bloquer à ce niveau? S'il s'agit du SMBus, est-ce que ça ne pourrait pas se passer plutôt du côté d'Intel?... Je dis ça j'en sais rien, je ne comprends pas bien où se situe et se branche le touchpad, matériellement et logiciellement...

Pour en finir avec Pegatron, j'ai du mal à identifier précisément le constructeur de la carte mère:

dmidecode -t 1



donne:


# dmidecode 2.12
# SMBIOS entry point at 0xb9ab8e18
SMBIOS 2.8 present.

Handle 0x0001, DMI type 1, 27 bytes
System Information
  Manufacturer: essentielb
  Product Name: SmartMOUV series
  Version: 1.0
  Serial Number: 13BPE5060791
  UUID: F523DFC0-5368-81E3-2145-0C54A50FA186
  Wake-up Type: Power Switch
  SKU Number: essentielb
  Family: To be filled by O.E.M.



M'étonnerait que Boulanger fabrique des cartes mères, même pas trop cuites...

J'ai trouvé ce lien, problème comparable, sur Ubuntu, impliquant une carte mère Pegatron. Je ne sais pas quoi en penser scratchhead.gif

Dernière modification par Wob (23-01-2017 16:20:19)

Hors ligne

#9 23-01-2017 17:20:20

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Re-,

Probable effectivement que Boulanger, à l'instar de Medion, se contente de passer commande auprès de Pegatron pour des machines construites et assemblées à Taïwan (un 'lspci -nnk' devrait te renvoyer un certain nombre d'occurrences de 'Pegatron').

Je suppose que tu as également scruté avec attention le fichier Xorg.0.log (en particulier à partir de la ligne 'ABI class: X.Org XInput driver, version machin') sans rien trouver d'intéressant ? Quid de 'lsmod | grep hid' ?

L'interface Intel 82801 implémentée semble prise en charge par le noyau depuis la version 3.15, mais pour le fun tu pourrais jouer avec les i2c-tools, quand tu en auras terminé avec Yakari bien sûr wink

Bonne suite, tu auras peut-être plus de chance sous Debian 9 'Stretch' et libinput !

En ligne

#10 23-01-2017 17:57:08

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

Re- re- tongue

Anéfé, Yakari et son fidèle poney are on the run de nouveau...

Est-ce qu'il y aurait des contre-indications à utiliser libinput sur Jessie ?...

Hors ligne

#11 24-01-2017 16:17:03

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

Bonjour,

Donc j'ai regardé rapidement Xorg.0.log mais je n'ai pas l’œil de sioux pour voir s'il y a un loup...

ABI class: X.Org XInput driver, version 21.0

J'ai mis le reste ici (pastebin)

Quant à

lsmod | grep hid



donne :

hid_generic            16384  0
usbhid                 53248  0
usbcore               249856  6 uvcvideo,usbhid,xhci_pci,rtsx_usb,btusb,xhci_hcd
i2c_hid                20480  0
hid                   118784  3 i2c_hid,hid_generic,usbhid



Je pourrais jouer avec les i2c-tools, mais pas sûr d'avoir le niveau et de ne pas faire de connerie...

Par ailleurs, est-ce que libinput changerait quelque chose, le touchpad n'étant manifestement pas reconnu en amont par le kernel linux ? (Ici aussi je ne suis pas du tout sûr de savoir ce que je dis...)

En tout cas merci pour les pistes, j'aurais sans doute été incapable d'éclaircir la confusion avec la souris et d'identifier l'origine du problème.

Pour la petite histoire, j'étais jusqu'ici sur un Mac en fin de vie dont le disque dur donne des signes de faiblesse. J'utilisais occasionnellement ce PC offert sur lequel je pense migrer définitivement.

Hors ligne

#12 24-01-2017 18:57:57

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Bonjour,

Oh en fait tu pouvais très bien poster ici-même tout ou partie de ton fichier Xorg.0.log (extrait) :

cat /var/log/Xorg.0.log

[    27.245] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    27.245] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.246] (II) LoadModule: "evdev"
[    27.246] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.308] (II) Module evdev: vendor="X.Org Foundation"
[    27.308]  compiled for 1.16.0, module version = 2.9.0
[    27.308]  Module class: X.Org XInput Driver
[    27.308]  ABI class: X.Org XInput driver, version 21.0
[    27.308] (II) Using input driver 'evdev' for 'Power Button'
[    27.308] (**) Power Button: always reports core events
[    27.308] (**) evdev: Power Button: Device: "/dev/input/event4"
[    27.308] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.308] (--) evdev: Power Button: Found keys
[    27.309] (II) evdev: Power Button: Configuring as keyboard
[    27.309] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    27.309] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.309] (**) Option "xkb_rules" "evdev"
[    27.309] (**) Option "xkb_model" "pc105"
[    27.309] (**) Option "xkb_layout" "fr"
[    27.309] (**) Option "xkb_variant" "latin9"
[    27.416] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    27.416] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.416] (II) Using input driver 'evdev' for 'Video Bus'
[    27.416] (**) Video Bus: always reports core events
[    27.416] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    27.417] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.417] (--) evdev: Video Bus: Found keys
[    27.417] (II) evdev: Video Bus: Configuring as keyboard
[    27.417] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[    27.417] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    27.417] (**) Option "xkb_rules" "evdev"
[    27.417] (**) Option "xkb_model" "pc105"
[    27.417] (**) Option "xkb_layout" "fr"
[    27.417] (**) Option "xkb_variant" "latin9"
[    27.418] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    27.418] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.418] (II) Using input driver 'evdev' for 'Power Button'
[    27.418] (**) Power Button: always reports core events
[    27.418] (**) evdev: Power Button: Device: "/dev/input/event1"
[    27.419] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.419] (--) evdev: Power Button: Found keys
[    27.419] (II) evdev: Power Button: Configuring as keyboard
[    27.419] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    27.419] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    27.419] (**) Option "xkb_rules" "evdev"
[    27.419] (**) Option "xkb_model" "pc105"
[    27.419] (**) Option "xkb_layout" "fr"
[    27.419] (**) Option "xkb_variant" "latin9"
[    27.420] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    27.420] (II) No input driver specified, ignoring this device.
[    27.421] (II) This device may have been added with another device file.
[    27.421] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    27.421] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    27.421] (II) Using input driver 'evdev' for 'Sleep Button'
[    27.421] (**) Sleep Button: always reports core events
[    27.421] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    27.421] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    27.422] (--) evdev: Sleep Button: Found keys
[    27.422] (II) evdev: Sleep Button: Configuring as keyboard
[    27.422] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    27.422] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    27.422] (**) Option "xkb_rules" "evdev"
[    27.422] (**) Option "xkb_model" "pc105"
[    27.422] (**) Option "xkb_layout" "fr"
[    27.422] (**) Option "xkb_variant" "latin9"
[    27.424] (II) config/udev: Adding input device USB Camera (/dev/input/event10)
[    27.424] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[    27.424] (II) Using input driver 'evdev' for 'USB Camera'
[    27.424] (**) USB Camera: always reports core events
[    27.424] (**) evdev: USB Camera: Device: "/dev/input/event10"
[    27.424] (--) evdev: USB Camera: Vendor 0xbda Product 0x570b
[    27.424] (--) evdev: USB Camera: Found keys
[    27.425] (II) evdev: USB Camera: Configuring as keyboard
[    27.425] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/input/input10/event10"
[    27.425] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 10)
[    27.425] (**) Option "xkb_rules" "evdev"
[    27.425] (**) Option "xkb_model" "pc105"
[    27.425] (**) Option "xkb_layout" "fr"
[    27.425] (**) Option "xkb_variant" "latin9"
[    27.426] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[    27.426] (II) No input driver specified, ignoring this device.
[    27.426] (II) This device may have been added with another device file.
[    27.427] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    27.427] (II) No input driver specified, ignoring this device.
[    27.427] (II) This device may have been added with another device file.
[    27.428] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[    27.428] (II) No input driver specified, ignoring this device.
[    27.428] (II) This device may have been added with another device file.
[    27.428] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    27.429] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.429] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.429] (**) AT Translated Set 2 keyboard: always reports core events
[    27.429] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    27.429] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.429] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.429] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.429] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    27.429] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    27.429] (**) Option "xkb_rules" "evdev"
[    27.429] (**) Option "xkb_model" "pc105"
[    27.429] (**) Option "xkb_layout" "fr"
[    27.429] (**) Option "xkb_variant" "latin9"
[    27.431] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    27.431] (II) No input driver specified, ignoring this device.
[    27.431] (II) This device may have been added with another device file.


Rien concernant le pavé tactile semble-t-il, mais le retour de la commande 'lsmod' montre tout de même que les modules i2c_hid et hid_generic sont chargés ; tu aurais d'ailleurs une vue moins restrictive avec :

lsmod | egrep 'hid|i2c'


Pour aller plus loin et se faire une idée de ce que voit effectivement le noyau :

dmesg


Comme tu l'as certainement vu, le paquet xserver-xorg-input-libinput n'a pas été rétroporté ; il doit y avoir une ou plusieurs raisons, outre la disponibilité des développeurs... compiler et installer ce nouveau pilote sur 'Jessie' serait un peu hasardeux. Quelques idées totalement en vrac, mais moins risquées :

# vérifier que le système est laptop-aware
apt-cache policy laptop-detect

# y a-t-il un groupe input hyper branché ?
cat /etc/group | grep input

# lister tous les paquets XInput installés
dpkg -l | grep xserver-xorg-in


En dernier recours, il y aurait peut-être le paquet xserver-xorg-input-mtrack ?

Dernière modification par èfpé (24-01-2017 19:14:14)

En ligne

#13 24-01-2017 21:54:29

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

Bonsoir bonsoir,

dmesg, je colle tout tu l'auras voulu smile, en dessous ce que j'ai relevé -- une ligne


[    0.000000] Linux version 4.8.0-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.8.15-2~bpo8+2 (2017-01-17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-0.bpo.2-amd64 root=UUID=b32b8b56-58d2-4b7a-b784-d564d2f1accf ro quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b9239fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b923a000-0x00000000b9269fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b926a000-0x00000000b9283fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b9284000-0x00000000b98e1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b98e2000-0x00000000b9b70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9b71000-0x00000000b9bbcfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000b9bbd000-0x00000000b9bbdfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9bbe000-0x00000000b9bfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9c00000-0x00000000b9d68fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9d69000-0x00000000b9ff9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xb926f000  ACPI 2.0=0xb926f000  ESRT=0xb9b6d018  SMBIOS=0xb9ab8e18
[    0.000000] esrt: Reserving ESRT space from 0x00000000b9b6d018 to 0x00000000b9b6d050.
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: essentielb Smart'MOUV series/Smart'MOUV series, BIOS 613 09/05/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BA000000 mask FFE000000 uncachable
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff8fe6c0098000] 98000 size 24576
[    0.000000] BRK [0x60155000, 0x60155fff] PGTABLE
[    0.000000] BRK [0x60156000, 0x60156fff] PGTABLE
[    0.000000] BRK [0x60157000, 0x60157fff] PGTABLE
[    0.000000] BRK [0x60158000, 0x60158fff] PGTABLE
[    0.000000] BRK [0x60159000, 0x60159fff] PGTABLE
[    0.000000] BRK [0x6015a000, 0x6015afff] PGTABLE
[    0.000000] BRK [0x6015b000, 0x6015bfff] PGTABLE
[    0.000000] BRK [0x6015c000, 0x6015cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3602a000-0x3700cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000B926F000 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x00000000B926F088 00008C (v01 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000B9282BB8 00010C (v05 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20160422/tbfadt-624)
[    0.000000] ACPI: DSDT 0x00000000B926F1A0 013A13 (v02 MEDION MEDIONAG 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000B98D7F80 000040
[    0.000000] ACPI: APIC 0x00000000B9282CC8 000084 (v03 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000B9282D50 000044 (v01 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 0x00000000B9282D98 0000C1 (v01 MEDION MEDIONAG 00000001 OEM. 00000003)
[    0.000000] ACPI: MCFG 0x00000000B9282E60 00003C (v01 MEDION MEDIONAG 01072009 MSFT 00000097)
[    0.000000] ACPI: LPIT 0x00000000B9282EA0 000104 (v01 MEDION MEDIONAG 00000003 VLV2 0100000D)
[    0.000000] ACPI: MSDM 0x00000000B9282FA8 000055 (v03 MEDION MEDIONAG 00000000 TEST 00000000)
[    0.000000] ACPI: HPET 0x00000000B9283000 000038 (v01 MEDION MEDIONAG 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000B9283038 000763 (v01 PmRef  CpuPm    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000B92837A0 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000B9283A30 00017A (v01 PmRef  ApTst    00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000B9283BB0 000042 (v01 MEDION MEDIONAG 00000000      00000000)
[    0.000000] ACPI: BGRT 0x00000000B9283BF8 000038 (v01 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff7000-0x13fffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020100000-0x00000000b9239fff]
[    0.000000]   node   0: [mem 0x00000000b9bbd000-0x00000000b9bbdfff]
[    0.000000]   node   0: [mem 0x00000000b9c00000-0x00000000b9d68fff]
[    0.000000]   node   0: [mem 0x00000000b9ffa000-0x00000000b9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1020486
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11787 pages used for memmap
[    0.000000]   DMA32 zone: 754346 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics memory at 0x00000000bb000000-0x00000000beffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] res dfl lint[0x66])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] res res lint[0x6d])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] res edge lint[0x39])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x30])
[    0.000000] ACPI: NMI not connected to LINT 1!
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb923a000-0xb9269fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb926a000-0xb9283fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9284000-0xb98e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb98e2000-0xb9b70fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9b71000-0xb9bbcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9bbe000-0xb9bfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9d69000-0xb9ff9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffbfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[    0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8fe7ffc00000 s104792 r8192 d30376 u524288
[    0.000000] pcpu-alloc: s104792 r8192 d30376 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1004517
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-0.bpo.2-amd64 root=UUID=b32b8b56-58d2-4b7a-b784-d564d2f1accf ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3676304K/4081944K available (6086K kernel code, 1193K rwdata, 2824K rodata, 1372K init, 808K bss, 405640K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Detected 1599.600 MHz processor
[    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.20 BogoMIPS (lpj=6398400)
[    0.000042] pid_max: default: 32768 minimum: 301
[    0.000085] ACPI: Core revision 20160422
[    0.039245] ACPI: 4 ACPI AML tables successfully acquired and loaded

[    0.040490] Security Framework initialized
[    0.040494] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.040506] AppArmor: AppArmor disabled by boot time parameter
[    0.041015] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.043302] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.044393] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.044412] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.045022] CPU: Physical Processor ID: 0
[    0.045025] CPU: Processor Core ID: 0
[    0.045030] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.045031] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.045042] mce: CPU supports 6 MCE banks
[    0.045056] process: using mwait in idle threads
[    0.045063] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.045065] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.045506] Freeing SMP alternatives memory: 24K (ffffffffb8a83000 - ffffffffb8a89000)
[    0.071714] ftrace: allocating 24807 entries in 97 pages
[    0.091249] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.091253] smpboot: Max logical packages: 1
[    0.092017] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.131725] TSC deadline timer enabled
[    0.131729] smpboot: CPU0: Intel(R) Celeron(R) CPU  N2910  @ 1.60GHz (family: 0x6, model: 0x37, stepping: 0x3)
[    0.131738] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.131770] ... version:                3
[    0.131772] ... bit width:              40
[    0.131773] ... generic registers:      2
[    0.131775] ... value mask:             000000ffffffffff
[    0.131776] ... max period:             0000007fffffffff
[    0.131777] ... fixed-purpose events:   3
[    0.131779] ... event mask:             0000000700000003
[    0.133234] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.133600] x86: Booting SMP configuration:
[    0.133603] .... node  #0, CPUs:      #1 #2 #3
[    0.374125] x86: Booted up 1 node, 4 CPUs
[    0.374130] smpboot: Total of 4 processors activated (12803.25 BogoMIPS)
[    0.375727] devtmpfs: initialized
[    0.375934] x86/mm: Memory block size: 128MB
[    0.384365] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.384369] PM: Registering ACPI NVS region [mem 0xb9284000-0xb98e1fff] (6676480 bytes)
[    0.384951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.385058] pinctrl core: initialized pinctrl subsystem
[    0.385373] NET: Registered protocol family 16
[    0.403966] cpuidle: using governor ladder
[    0.419982] cpuidle: using governor menu
[    0.420040] ACPI: bus type PCI registered
[    0.420043] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.420208] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.420213] PCI: not using MMCONFIG
[    0.420215] PCI: Using configuration type 1 for base access
[    0.436320] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.437057] ACPI: Added _OSI(Module Device)
[    0.437060] ACPI: Added _OSI(Processor Device)
[    0.437061] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.437063] ACPI: Added _OSI(Processor Aggregator Device)
[    0.437068] ACPI : EC: EC description table is found, configuring boot EC
[    0.437070] ACPI : EC: EC started
[    0.491290] ACPI: Dynamic OEM Table Load:
[    0.491304] ACPI: SSDT 0xFFFF8FE7FA5C2800 000395 (v01 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.492902] ACPI: Dynamic OEM Table Load:
[    0.492913] ACPI: SSDT 0xFFFF8FE7FB0A8800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.495187] ACPI: Dynamic OEM Table Load:
[    0.495197] ACPI: SSDT 0xFFFF8FE7FA5BD600 00015F (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.496729] ACPI: Dynamic OEM Table Load:
[    0.496738] ACPI: SSDT 0xFFFF8FE7FA769240 00008D (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.500289] ACPI : EC: EC stopped
[    0.500517] ACPI : EC: EC started
[    0.500786] ACPI: Interpreter enabled
[    0.500837] ACPI: (supports S0 S3 S4 S5)
[    0.500839] ACPI: Using IOAPIC for interrupt routing
[    0.500926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.502226] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.502264] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.516382] ACPI: Power Resource [USBC] (on)
[    0.519542] ACPI: Power Resource [PLPE] (on)
[    0.520093] ACPI: Power Resource [PLPE] (on)
[    0.532788] ACPI: Power Resource [CLK0] (on)
[    0.532913] ACPI: Power Resource [CLK1] (on)
[    0.620079] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.620092] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.620349] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.621400] PCI host bridge to bus 0000:00
[    0.621406] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.621410] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.621413] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.621416] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.621419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.621423] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.621426] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.621429] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0815ffe window]
[    0.621433] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.621447] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.621741] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.621758] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
[    0.621772] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[    0.621786] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
[    0.622083] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
[    0.622104] pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
[    0.622116] pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
[    0.622126] pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
[    0.622137] pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
[    0.622148] pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
[    0.622159] pci 0000:00:13.0: reg 0x24: [mem 0xd0815000-0xd08157ff]
[    0.622227] pci 0000:00:13.0: PME# supported from D3hot
[    0.622488] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
[    0.622510] pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
[    0.622585] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.622746] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.622863] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.622890] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
[    0.622905] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
[    0.623022] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.623277] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
[    0.623303] pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit]
[    0.623390] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.623642] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
[    0.623721] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.623982] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
[    0.624061] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.624313] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
[    0.624391] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.624647] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
[    0.624726] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.624985] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.625313] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
[    0.625350] pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f]
[    0.625425] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.625882] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.626017] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.626221] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.626258] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.626294] pci 0000:03:00.0: reg 0x18: [mem 0xd0704000-0xd0704fff 64bit]
[    0.626318] pci 0000:03:00.0: reg 0x20: [mem 0xd0700000-0xd0703fff 64bit pref]
[    0.626447] pci 0000:03:00.0: supports D1 D2
[    0.626450] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.626547] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.638263] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.638269] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.638274] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.638491] pci 0000:04:00.0: [10ec:b723] type 00 class 0x028000
[    0.638521] pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.638564] pci 0000:04:00.0: reg 0x18: [mem 0xd0600000-0xd0603fff 64bit]
[    0.638774] pci 0000:04:00.0: supports D1 D2
[    0.638777] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.638918] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.650305] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.650311] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.650316] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.651944] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.652136] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.652325] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.652513] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.652702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.652890] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.653079] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.653269] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.656639] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.656716] ACPI : EC: EC stopped
[    0.668467] ACPI : EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
[    0.668469] ACPI : EC: EC started
[    0.668999] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.669002] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.669008] vgaarb: loaded
[    0.669010] vgaarb: bridge control possible 0000:00:02.0
[    0.672912] PCI: Using ACPI for IRQ routing
[    0.679719] PCI: pci_cache_line_size set to 64 bytes
[    0.679833] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.679837] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.679839] e820: reserve RAM buffer [mem 0xb923a000-0xbbffffff]
[    0.679842] e820: reserve RAM buffer [mem 0xb9bbe000-0xbbffffff]
[    0.679845] e820: reserve RAM buffer [mem 0xb9d69000-0xbbffffff]
[    0.679847] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    0.680259] clocksource: Switched to clocksource refined-jiffies
[    0.697334] VFS: Disk quotas dquot_6.6.0
[    0.697395] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.697616] pnp: PnP ACPI init
[    0.697769] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.698061] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.698066] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.698070] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.698074] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.698080] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.698226] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.698330] pnp 00:03: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active)
[    0.699087] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.699092] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.699096] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.699100] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
[    0.699104] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved
[    0.699108] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.699112] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.699115] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.699119] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.699126] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.702289] pnp: PnP ACPI: found 5 devices
[    0.712272] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.712303] clocksource: Switched to clocksource acpi_pm
[    0.712332] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.712339] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.712343] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.712353] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.712358] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.712362] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.712374] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.712385] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.712403] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.712407] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.712411] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712415] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712419] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.712422] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.712426] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712430] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712433] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712437] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712441] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712445] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.712448] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.712452] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.712455] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.712459] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.712471] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[    0.712474] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.712485] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712489] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712495] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
[    0.712498] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
[    0.712508] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712511] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712521] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712524] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712534] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712538] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712544] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.712550] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.712563] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712566] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712576] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712579] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712585] pci 0000:00:1c.1: BAR 14: no space for [mem size 0x00200000]
[    0.712588] pci 0000:00:1c.1: BAR 14: failed to assign [mem size 0x00200000]
[    0.712598] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712601] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712607] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
[    0.712610] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.712620] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.712623] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.712628] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.712633] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.712645] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.712649] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.712660] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.712664] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.712670] pci 0000:00:1c.2:   bridge window [mem 0xd0700000-0xd07fffff]
[    0.712679] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.712682] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.712688] pci 0000:00:1c.3:   bridge window [mem 0xd0600000-0xd06fffff]
[    0.712697] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.712701] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.712704] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.712707] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.712710] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.712713] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.712716] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.712719] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0815ffe window]
[    0.712722] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.712726] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.712729] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.712732] pci_bus 0000:03: resource 1 [mem 0xd0700000-0xd07fffff]
[    0.712735] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.712738] pci_bus 0000:04: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.712918] NET: Registered protocol family 2
[    0.713379] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.713554] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.713752] TCP: Hash tables configured (established 32768 bind 32768)
[    0.713829] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.713874] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.714032] NET: Registered protocol family 1
[    0.714069] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.714611] PCI: CLS 64 bytes, default 64
[    0.714733] Unpacking initramfs...
[    1.330480] Freeing initrd memory: 16268K (ffff8fe6f602a000 - ffff8fe6f700d000)
[    1.330486] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.330490] software IO TLB [mem 0xa62a2000-0xaa2a2000] (64MB) mapped at [ffff8fe7662a2000-ffff8fe76a2a1fff]
[    1.331598] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.331665] audit: initializing netlink subsys (disabled)
[    1.331710] audit: type=2000 audit(1485283142.315:1): initialized
[    1.332397] Initialise system trusted keyrings
[    1.332760] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    1.332796] zbud: loaded
[    1.460232] Key type asymmetric registered
[    1.460235] Asymmetric key parser 'x509' registered
[    1.460299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.460417] io scheduler noop registered
[    1.460419] io scheduler deadline registered
[    1.460431] io scheduler cfq registered (default)
[    1.461496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.461512] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.461558] efifb: probing for efifb
[    1.461585] efifb: framebuffer at 0xc0000000, using 4160k, total 4160k
[    1.461588] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.461589] efifb: scrolling: redraw
[    1.461591] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.469839] Console: switching to colour frame buffer device 170x48
[    1.477750] fb0: EFI VGA frame buffer device
[    1.477770] intel_idle: MWAIT substates: 0x33000020
[    1.477773] intel_idle: v0.4.1 model 0x37
[    1.478236] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.482449] GHES: HEST is not enabled!
[    1.482596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.484043] hpet: number irqs doesn't agree with number of timers
[    1.484094] Linux agpgart interface v0.103
[    1.484201] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.484203] AMD IOMMUv2 functionality not available on this system
[    1.485146] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.747058] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.747613] mousedev: PS/2 mouse device common for all mice
[    1.747709] rtc_cmos 00:00: RTC can wake from S4
[    1.748045] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.748077] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    1.748099] intel_pstate: Intel P-state driver initializing
[    1.750032] ledtrig-cpu: registered to indicate activity on CPUs
[    1.754605] NET: Registered protocol family 10
[    1.756674] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.757284] mip6: Mobile IPv6
[    1.757295] NET: Registered protocol family 17
[    1.757313] mpls_gso: MPLS GSO support
[    1.759452] microcode: sig=0x30673, pf=0x8, revision=0x324
[    1.760537] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.761941] registered taskstats version 1
[    1.761946] Loading compiled-in X.509 certificates
[    1.778301] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.780737] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    1.780855] zswap: loaded using pool lzo/zbud
[    1.785350] rtc_cmos 00:00: setting system clock to 2017-01-24 18:39:02 UTC (1485283142)
[    1.785939] PM: Hibernation image not present or could not be loaded.
[    1.793838] Freeing unused kernel memory: 1372K (ffffffffb892c000 - ffffffffb8a83000)
[    1.793846] Write protecting the kernel read-only data: 10240k
[    1.796378] Freeing unused kernel memory: 40K (ffff8fe71f9f6000 - ffff8fe71fa00000)
[    1.808389] Freeing unused kernel memory: 1272K (ffff8fe71fcc2000 - ffff8fe71fe00000)
[    1.830344] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.910402] systemd-udevd[91]: starting version 215
[    1.912773] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.954256] mmc_core: module verification failed: signature and/or required key missing - tainting kernel
[    1.956380] sdhci: Secure Digital Host Controller Interface driver
[    1.956383] sdhci: Copyright(c) Pierre Ossman
[    1.963754] hidraw: raw HID events driver (C) Jiri Kosina
[    1.967624] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.991793] thermal LNXTHERM:00: registered as thermal_zone0
[    1.991801] ACPI: Thermal Zone [THRM] (48 C)
[    1.992441] SCSI subsystem initialized
[    1.993625] ACPI: bus type USB registered
[    1.993692] usbcore: registered new interface driver usbfs
[    1.993726] usbcore: registered new interface driver hub
[    1.993803] usbcore: registered new device driver usb
[    1.996996] libata version 3.00 loaded.
[    1.997302] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.997322] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.998453] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.998463] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.998697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.998701] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.998703] usb usb1: Product: xHCI Host Controller
[    1.998706] usb usb1: Manufacturer: Linux 4.8.0-0.bpo.2-amd64 xhci-hcd
[    1.998709] usb usb1: SerialNumber: 0000:00:14.0
[    1.999099] hub 1-0:1.0: USB hub found
[    1.999123] hub 1-0:1.0: 6 ports detected
[    2.000390] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.000400] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.000512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.000516] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.000519] usb usb2: Product: xHCI Host Controller
[    2.000521] usb usb2: Manufacturer: Linux 4.8.0-0.bpo.2-amd64 xhci-hcd
[    2.000524] usb usb2: SerialNumber: 0000:00:14.0
[    2.000924] hub 2-0:1.0: USB hub found
[    2.000944] hub 2-0:1.0: 1 port detected
[    2.001384] ahci 0000:00:13.0: version 3.0
[    2.002958] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.002979] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.003764] r8169 0000:03:00.0 eth0: RTL8106e at 0xffffc46900656000, 0c:54:a5:0f:a1:86, XID 04900000 IRQ 89
[    2.011819] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.011825] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm apst
[    2.013786] scsi host0: ahci
[    2.015269] scsi host1: ahci
[    2.015462] ata1: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815100 irq 88
[    2.015467] ata2: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815180 irq 88
[    2.325377] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    2.330046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.330859] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.336451] ata2.00: ATAPI: TSSTcorp CDDVDW SU-208FB, MD00, max UDMA/100
[    2.337385] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
[    2.337397] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.344220] ata2.00: configured for UDMA/100
[    2.344804] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[    2.344835] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns
[    2.345469] ata1.00: configured for UDMA/133
[    2.347534] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[    2.385558] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SU-208FB  MD00 PQ: 0 ANSI: 5
[    2.413182] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.413195] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.413806] sd 0:0:0:0: [sda] Write Protect is off
[    2.413821] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.414021] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.436652] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.436665] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.437780] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.439895] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.440135] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.468528] usb 1-1: New USB device found, idVendor=062a, idProduct=0000
[    2.468541] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.469248]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[    2.472321] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.474148] usbcore: registered new interface driver usbhid
[    2.474151] usbhid: USB HID core driver
[    2.475685] input: HID 062a:0000 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:062A:0000.0001/input/input1
[    2.475930] hid-generic 0003:062A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:14.0-1/input0
[    2.588829] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    2.729822] usb 1-4: New USB device found, idVendor=058f, idProduct=6254
[    2.729827] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.730853] hub 1-4:1.0: USB hub found
[    2.730966] hub 1-4:1.0: 4 ports detected
[    2.924351] random: fast init done
[    3.017338] usb 1-4.1: new high-speed USB device number 4 using xhci_hcd
[    3.117807] usb 1-4.1: New USB device found, idVendor=0bda, idProduct=0129
[    3.117812] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.117815] usb 1-4.1: Product: USB2.0-CRW
[    3.117817] usb 1-4.1: Manufacturer: Generic
[    3.117820] usb 1-4.1: SerialNumber: 20100201396000000
[    3.124096] usbcore: registered new interface driver rtsx_usb
[    3.217390] usb 1-4.3: new high-speed USB device number 5 using xhci_hcd
[    3.369746] clocksource: Switched to clocksource tsc
[    3.464226] usb 1-4.3: New USB device found, idVendor=0bda, idProduct=570b
[    3.464238] usb 1-4.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.464247] usb 1-4.3: Product: USB Camera
[    3.464255] usb 1-4.3: Manufacturer: 0420-00SE000DAO7F6
[    3.464262] usb 1-4.3: SerialNumber: 200901010001
[    3.569200] usb 1-4.4: new full-speed USB device number 6 using xhci_hcd
[    3.622307] PM: Starting manual resume from disk
[    3.622321] PM: Hibernation image partition 8:9 present
[    3.622326] PM: Looking for hibernation image.
[    3.645315] PM: Image not found (code -22)
[    3.645319] PM: Hibernation image not present or could not be loaded.
[    3.678349] usb 1-4.4: New USB device found, idVendor=13d3, idProduct=3410
[    3.678361] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.678370] usb 1-4.4: Product: Bluetooth Radio
[    3.678377] usb 1-4.4: Manufacturer: Realtek
[    3.678385] usb 1-4.4: SerialNumber: 00e04c000001
[    3.975389] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    4.681574] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    4.727082] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    4.728278] systemd[1]: Detected architecture 'x86-64'.
[    4.928350] systemd[1]: Inserted module 'autofs4'
[    4.951817] systemd[1]: Set hostname to <debiananou>.
[    5.069587] random: crng init done
[    6.001825] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.002000] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.002031] systemd[1]: Starting Remote File Systems (Pre).
[    6.002101] systemd[1]: Reached target Remote File Systems (Pre).
[    6.002151] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.002235] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.680873] lp: driver loaded but no devices found
[    6.703478] ppdev: user-space parallel port driver
[    7.033286] fuse init (API version 7.25)
[    7.293744] systemd-udevd[196]: starting version 215
[    8.849755] ACPI: Battery Slot [BAT0] (battery present)
[    8.913990] ACPI: AC Adapter [AC0] (on-line)
[    9.011329] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    9.011339] ACPI: Power Button [PWRB]
[    9.011474] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    9.011479] ACPI: Sleep Button [SLPB]
[    9.011622] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    9.034475] ACPI: Lid Switch [LID]
[    9.034645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    9.034653] ACPI: Power Button [PWRF]
[    9.124042] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.124923] wmi: Mapper loaded
[    9.132599] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.264259] EFI Variables Facility v0.08 2004-May-17
[    9.270840] pstore: using zlib compression
[    9.270868] pstore: Registered efi as persistent store backend
[    9.297569] [drm] Initialized drm 1.1.0 20060810
[    9.624183] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[    9.644611] Bluetooth: Core ver 2.21
[    9.644641] NET: Registered protocol family 31
[    9.644644] Bluetooth: HCI device and connection manager initialized
[    9.644651] Bluetooth: HCI socket layer initialized
[    9.644657] Bluetooth: L2CAP socket layer initialized
[    9.644670] Bluetooth: SCO socket layer initialized
[    9.758284] Bluetooth: HCI UART driver ver 2.3
[    9.758289] Bluetooth: HCI UART protocol H4 registered
[    9.758290] Bluetooth: HCI UART protocol BCSP registered
[    9.758292] Bluetooth: HCI UART protocol LL registered
[    9.758293] Bluetooth: HCI UART protocol ATH3K registered
[    9.758295] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    9.758356] Bluetooth: HCI UART protocol Intel registered
[    9.761933] Bluetooth: HCI UART protocol BCM registered
[    9.761936] Bluetooth: HCI UART protocol QCA registered
[    9.761938] Bluetooth: HCI UART protocol AG6XX registered
[    9.769726] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    9.838973] [drm] Memory usable by graphics device = 2048M
[    9.838979] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[    9.838981] fb: switching to inteldrmfb from EFI VGA
[    9.839069] Console: switching to colour dummy device 80x25
[    9.839254] [drm] Replacing VGA console driver
[    9.839402] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.839404] [drm] Driver supports precise vblank timestamp query.
[    9.840187] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.860902] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.861584] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    9.861686] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    9.865124] fbcon: inteldrmfb (fb0) is primary device
[   10.591580] intel_soc_dts_thermal: request_threaded_irq ret -22
[   10.627763] intel_soc_dts_thermal: request_threaded_irq ret -22
[   10.675483] intel_soc_dts_thermal: request_threaded_irq ret -22
[   10.735521] intel_soc_dts_thermal: request_threaded_irq ret -22
[   11.008063] intel_rapl: Found RAPL domain package
[   11.008072] intel_rapl: Found RAPL domain core
[   11.096711] Console: switching to colour frame buffer device 170x48
[   11.121549] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.121647] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.470236] rtl8723be 0000:04:00.0: enabling device (0000 -> 0003)
[   11.488352] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[   11.565691] rtl8723be 0000:04:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
[   11.597150] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.597156] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.597159] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   11.597162] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.597164] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.597168] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   11.597171] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.639940] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   11.640124] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   11.640300] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.665357] media: Linux media interface: v0.10
[   11.735431] iTCO_vendor_support: vendor-support=0
[   11.786680] Linux video capture interface: v2.00
[   11.803179] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.803273] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[   11.803536] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.968433] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   11.968987] rtlwifi: rtlwifi: wireless switch is on
[   12.027581] usbcore: registered new interface driver btusb
[   12.029146] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   12.029151] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   12.029196] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_fw.bin (-2)
[   12.029318] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2
[   12.029322] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin
[   12.440121] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[   12.440127] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[   12.440155] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_fw.bin (-2)
[   12.440269] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2
[   12.440273] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin
[   12.722096] uvcvideo: Found UVC 1.00 device USB Camera (0bda:570b)
[   12.727577] uvcvideo 1-4.3:1.0: Entity type for entity Extension 4 was not initialized!
[   12.727584] uvcvideo 1-4.3:1.0: Entity type for entity Processing 2 was not initialized!
[   12.727589] uvcvideo 1-4.3:1.0: Entity type for entity Camera 1 was not initialized!
[   12.727795] input: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/input/input11
[   12.727947] usbcore: registered new interface driver uvcvideo
[   12.727949] USB Video Class driver (1.1.1)
[   12.783005] Adding 4081660k swap on /dev/sda9.  Priority:-1 extents:1 across:4081660k FS
[   14.583823] systemd-journald[191]: Received request to flush runtime journal from PID 1
[   16.055989] RPC: Registered named UNIX socket transport module.
[   16.055993] RPC: Registered udp transport module.
[   16.055994] RPC: Registered tcp transport module.
[   16.056003] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   16.104229] FS-Cache: Loaded
[   16.160696] FS-Cache: Netfs 'nfs' registered for caching
[   16.195384] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.893349] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.893354] Bluetooth: BNEP filters: protocol multicast
[   20.893363] Bluetooth: BNEP socket layer initialized
[   22.430620] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8106e-1.fw
[   22.607584] r8169 0000:03:00.0 eth0: link down
[   22.607674] r8169 0000:03:00.0 eth0: link down
[   24.358122] r8169 0000:03:00.0 eth0: link up
[   25.638126] wlan0: authenticate with f4:ca:e5:a0:bb:05
[   25.649013] wlan0: send auth to f4:ca:e5:a0:bb:05 (try 1/3)
[   25.651748] wlan0: authenticated
[   25.654894] wlan0: associate with f4:ca:e5:a0:bb:05 (try 1/3)
[   25.660113] wlan0: RX AssocResp from f4:ca:e5:a0:bb:05 (capab=0x401 status=0 aid=1)
[   25.661061] wlan0: associated
[  954.167022] wlan0: Connection to AP f4:ca:e5:a0:bb:05 lost
[  955.374122] wlan0: authenticate with 68:a3:78:1b:8b:10
[  955.389066] wlan0: send auth to 68:a3:78:1b:8b:10 (try 1/3)
[  955.393083] wlan0: authenticated
[  955.394618] wlan0: associate with 68:a3:78:1b:8b:10 (try 1/3)
[  955.398410] wlan0: RX AssocResp from 68:a3:78:1b:8b:10 (capab=0x401 status=0 aid=1)
[  955.399375] wlan0: associated
[ 1153.800762] wlan0: Connection to AP 68:a3:78:1b:8b:10 lost
[ 1160.652693] wlan0: authenticate with f4:ca:e5:a0:bb:05
[ 1160.665420] wlan0: send auth to f4:ca:e5:a0:bb:05 (try 1/3)
[ 1160.668226] wlan0: authenticated
[ 1160.669597] wlan0: associate with f4:ca:e5:a0:bb:05 (try 1/3)
[ 1160.674172] wlan0: RX AssocResp from f4:ca:e5:a0:bb:05 (capab=0x401 status=0 aid=1)
[ 1160.674778] wlan0: associated
[ 1304.297288] wlan0: disconnect from AP f4:ca:e5:a0:bb:05 for new auth to 68:a3:78:1b:8b:10
[ 1304.313400] wlan0: authenticate with 68:a3:78:1b:8b:10
[ 1304.324249] wlan0: send auth to 68:a3:78:1b:8b:10 (try 1/3)
[ 1304.328465] wlan0: authenticated
[ 1304.333670] wlan0: associate with 68:a3:78:1b:8b:10 (try 1/3)
[ 1304.339956] wlan0: RX AssocResp from 68:a3:78:1b:8b:10 (capab=0x401 status=0 aid=1)
[ 1304.340911] wlan0: associated
[ 2024.437521] wlan0: disconnect from AP 68:a3:78:1b:8b:10 for new auth to f4:ca:e5:e4:51:29
[ 2024.457099] wlan0: authenticate with f4:ca:e5:e4:51:29
[ 2024.468466] wlan0: send auth to f4:ca:e5:e4:51:29 (try 1/3)
[ 2024.573178] wlan0: send auth to f4:ca:e5:e4:51:29 (try 2/3)
[ 2024.677190] wlan0: send auth to f4:ca:e5:e4:51:29 (try 3/3)
[ 2024.781412] wlan0: authentication with f4:ca:e5:e4:51:29 timed out
[ 2024.997966] wlan0: authenticate with 68:a3:78:1b:8b:10
[ 2025.015766] wlan0: send auth to 68:a3:78:1b:8b:10 (try 1/3)
[ 2025.019657] wlan0: authenticated
[ 2025.025967] wlan0: associate with 68:a3:78:1b:8b:10 (try 1/3)
[ 2025.030118] wlan0: RX AssocResp from 68:a3:78:1b:8b:10 (capab=0x401 status=0 aid=1)
[ 2025.031448] wlan0: associated
[ 2264.535305] wlan0: disconnect from AP 68:a3:78:1b:8b:10 for new auth to f4:ca:e5:a0:bb:05
[ 2264.548247] wlan0: authenticate with f4:ca:e5:a0:bb:05
[ 2264.559476] wlan0: send auth to f4:ca:e5:a0:bb:05 (try 1/3)
[ 2264.562722] wlan0: authenticated
[ 2264.565502] wlan0: associate with f4:ca:e5:a0:bb:05 (try 1/3)
[ 2264.575873] wlan0: RX AssocResp from f4:ca:e5:a0:bb:05 (capab=0x401 status=0 aid=1)
[ 2264.576851] wlan0: associated
[ 3236.560168] wlan0: Connection to AP f4:ca:e5:a0:bb:05 lost
[ 3237.457695] wlan0: authenticate with 68:a3:78:cc:fd:65
[ 3237.474437] wlan0: send auth to 68:a3:78:cc:fd:65 (try 1/3)
[ 3237.575900] wlan0: send auth to 68:a3:78:cc:fd:65 (try 2/3)
[ 3237.680178] wlan0: send auth to 68:a3:78:cc:fd:65 (try 3/3)
[ 3237.783878] wlan0: authentication with 68:a3:78:cc:fd:65 timed out
[ 3237.992355] wlan0: authenticate with f4:ca:e5:ea:84:49
[ 3238.010008] wlan0: send auth to f4:ca:e5:ea:84:49 (try 1/3)
[ 3238.112126] wlan0: send auth to f4:ca:e5:ea:84:49 (try 2/3)
[ 3238.215998] wlan0: send auth to f4:ca:e5:ea:84:49 (try 3/3)
[ 3238.320139] wlan0: authentication with f4:ca:e5:ea:84:49 timed out
[ 3238.483483] wlan0: authenticate with 68:a3:78:7b:1f:a0
[ 3238.494771] wlan0: send auth to 68:a3:78:7b:1f:a0 (try 1/3)
[ 3238.596095] wlan0: send auth to 68:a3:78:7b:1f:a0 (try 2/3)
[ 3238.700203] wlan0: send auth to 68:a3:78:7b:1f:a0 (try 3/3)
[ 3238.804139] wlan0: authentication with 68:a3:78:7b:1f:a0 timed out
[ 3240.019893] wlan0: authenticate with 68:a3:78:1b:8b:10
[ 3240.031149] wlan0: send auth to 68:a3:78:1b:8b:10 (try 1/3)
[ 3240.033925] wlan0: authenticated
[ 3240.036430] wlan0: associate with 68:a3:78:1b:8b:10 (try 1/3)
[ 3240.041084] wlan0: RX AssocResp from 68:a3:78:1b:8b:10 (capab=0x401 status=0 aid=1)
[ 3240.042036] wlan0: associated
[ 3464.822778] wlan0: disconnect from AP 68:a3:78:1b:8b:10 for new auth to 22:e8:a4:e8:fa:85
[ 3464.841108] wlan0: authenticate with 22:e8:a4:e8:fa:85
[ 3464.852346] wlan0: send auth to 22:e8:a4:e8:fa:85 (try 1/3)
[ 3464.956533] wlan0: send auth to 22:e8:a4:e8:fa:85 (try 2/3)
[ 3465.060556] wlan0: send auth to 22:e8:a4:e8:fa:85 (try 3/3)
[ 3465.164756] wlan0: authentication with 22:e8:a4:e8:fa:85 timed out
[ 3465.445411] wlan0: authenticate with 68:a3:78:1b:8b:10
[ 3465.456345] wlan0: send auth to 68:a3:78:1b:8b:10 (try 1/3)
[ 3465.560683] wlan0: send auth to 68:a3:78:1b:8b:10 (try 2/3)
[ 3465.664707] wlan0: send auth to 68:a3:78:1b:8b:10 (try 3/3)
[ 3465.674645] wlan0: authenticated
[ 3465.676610] wlan0: associate with 68:a3:78:1b:8b:10 (try 1/3)
[ 3465.697098] wlan0: RX AssocResp from 68:a3:78:1b:8b:10 (capab=0x401 status=0 aid=1)
[ 3465.698434] wlan0: associated



pour ce qui nous occupe là je remarquerai peut-être :

[    9.124042] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt



dont je ne sais pas trop quoi faire...

Pour le reste :

lsmod | egrep 'hid|i2c'



retourne

i2c_algo_bit           16384  1 i915
i2c_i801               24576  0
i2c_designware_platform    16384  0
i2c_designware_core    20480  1 i2c_designware_platform
i2c_smbus              16384  1 i2c_i801
hid_generic            16384  0
usbhid                 53248  0
usbcore               249856  6 uvcvideo,usbhid,xhci_pci,rtsx_usb,btusb,xhci_hcd
i2c_hid                20480  0
hid                   118784  3 i2c_hid,hid_generic,usbhid



sinon, laptop yeah :


laptop-detect:
  Installé : 0.13.7
  Candidat : 0.13.7
 Table de version :
 *** 0.13.7 0
        500 http://ftp.fr.debian.org/debian/ jessie/main amd64 Packages
        500 http://httpredir.debian.org/debian/ jessie/main amd64 Packages
        100 /var/lib/dpkg/status



Input :

input:x:101:



et paquets xinput (entretemps j'ai installé mtrack, RAS, TouchPad toujours HS)

ii  xserver-xorg-input-all                   1:7.7+7                              amd64        X.Org X server -- input driver metapackage
ii  xserver-xorg-input-evdev                 1:2.9.0-2                            amd64        X.Org X server -- evdev input driver
ii  xserver-xorg-input-mouse                 1:1.9.1-1                            amd64        X.Org X server -- mouse input driver
ii  xserver-xorg-input-mtrack                0.3.0-1+b3                           amd64        Multitouch X input driver
ii  xserver-xorg-input-synaptics             1.8.1-1                              amd64        Synaptics TouchPad driver for X.Org server
ii  xserver-xorg-input-vmmouse               1:13.0.0-1+b3                        amd64        X.Org X server -- VMMouse input driver to use with VMWare
ii  xserver-xorg-input-wacom                 0.26.0+20140918-1                    amd64        X.Org X server -- Wacom input driver



où je ne vois pas ce qui pourrait manquer.

Dernière modification par Wob (24-01-2017 21:58:10)

Hors ligne

#14 24-01-2017 22:14:14

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Salut salut,

As-tu vérifié que tu fais effectivement partie du groupe input ?

groups $USER | grep input


Thx pour la totale du tampon des messages du noyau.

En ligne

#15 24-01-2017 22:17:11

potemkine17
Membre
Distrib. : Débian 9
Noyau : i386
(G)UI : LXDE
Inscription : 17-09-2014

Re : TouchPad non reconnu

Bonsoir,
rien du côtés des paramètres ? J'ai connu un problème identique et la solution, après des heures stériles de ligne de commande, était une très discrète case à décocher. Enfin, c'était sous KDE et les causes sont peut-être différentes. Je ne veux pas faire perdre du temps à personne...

Hors ligne

#16 24-01-2017 22:29:05

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

re- èfpé

groups moi | grep input



ne retourne rien ! kézako ? Je vais voir ça de ce pas.

@potemkine non c'est pas idiot je l'avais pas précisé mais ça peut être utile par ailleurs : le pavé tactile n’apparaît pas du tout dans les paramètres.

Hors ligne

#17 24-01-2017 22:42:42

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Re-,

Ça vaut le coup de tenter cette commande :

gpasswd --add $USER input


Des fois que ça tomberait en marche...

Dernière modification par èfpé (24-01-2017 23:17:17)

En ligne

#18 24-01-2017 22:55:04

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

re- re- rhaa...

Je me suis contenté d'un

adduser moi input
 



puis redémarré, rien.

Dois-je réitérer en me re-rajoutant au groupe input avec la commande gpasswd après m'y être supprimé ? (suis-je clair ?)

Hors ligne

#19 24-01-2017 23:22:22

èfpé
Membre
Inscription : 10-07-2016

Re : TouchPad non reconnu

Fail sad

Inutile d'insister je crois. Mais tu peux te procurer une souris pas trop erratique du clic droit.

En ligne

#20 24-01-2017 23:36:04

Wob
Membre
Distrib. : Jessie 8.7
Noyau : 4.8.0-0.bpo.2-amd64
(G)UI : Gnome 3.14.1
Inscription : 22-01-2017

Re : TouchPad non reconnu

kernal_panic.gif

Bon. De toute façon il s'avère que cette souris n'est pas erratique que du clic droit ni que sur cet ordi.

Bref, je vais sagement suivre ton conseil et attendre avec ferveur l'arrivée du divin stretch qui ne devrait plus tarder. Bien que je ne sois pas très croyant hmm
(cela dit si quelqu'un a une idée géniale...)

En tout cas c'était un plaisir, à la revoyure, qui ne devrait pas tarder non plus : j'ai un ventilo qui a l'air de tourner cinoque.
Et pour filer un coup de main à l'occasion dès que je pourrais, maintenant que je fais partie de la secte wink

Hors ligne

Pied de page des forums