logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 01-02-2017 15:18:04

philippechatal
Membre
Inscription : 01-02-2017

DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

bonjour, depuis une mis a jour de débian 8.7 simple scan ne détecte plus le scanner.
impossible de scanner.
merci pour votre aide. je suis nouveau.

Hors ligne

#2 01-02-2017 15:47:00

deuchdeb
Moderato ma non troppo
Distrib. : Debian11-KDE-Plasma, LinuxMintCinnamon, DFLinux11
Noyau : Noyau stable
(G)UI : KDE Plasma 5.20
Inscription : 13-01-2010
Site Web

Re : DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

Bonjour et bienvenue, philippechatal,

Tout d'abord commençons par le début.

Qu'elle est ta configuration? https://debian-facile.org/:atelier:indications-forum

Une fleur, c'est magique non? smile
Association Debian Facile

Hors ligne

#3 01-02-2017 16:01:37

philippechatal
Membre
Inscription : 01-02-2017

Re : DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

salut voici toutes les infos que j'ai.


Installation : HandyLinux-2.5 jeu. 08 sept. 2016

Version : HandyLinux-2.5.1

Kernel : Linux 3.16.0-4-686-pae

lspci :
00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation NV44 [GeForce 6200 LE] (rev a1)
02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0)
03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)

lsusb :
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 0aec:3050 Neodio Technologies Corp. ND3050 8-in-1 Card Reader
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Info matériel :
BIOS Information
  Vendor: American Megatrends Inc.
  Version: 0303  
  Release Date: 06/23/2008
  Address: 0xF0000
  Runtime Size: 64 kB
  ROM Size: 1024 kB
  Characteristics:
    ISA is supported
    PCI is supported
    PNP is supported
    APM is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    ESCD support is available
    Boot from CD is supported
    Selectable boot is supported
    BIOS ROM is socketed
    EDD is supported
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 kB floppy services are supported (int 13h)
    3.5"/2.88 MB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    CGA/mono video services are supported (int 10h)
    ACPI is supported
    USB legacy is supported
    LS-120 boot is supported
    ATAPI Zip drive boot is supported
    BIOS boot specification is supported
    Targeted content distribution is supported
  BIOS Revision: 8.12

System Information
  Manufacturer: System manufacturer
  Product Name: P5E-VM SE
  Version: System Version
  Serial Number: System Serial Number
  UUID: C00D001E-8C00-0166-2C6E-00221569AC38
  Wake-up Type: Power Switch
  SKU Number: To Be Filled By O.E.M.
  Family: To Be Filled By O.E.M.

Processor Information
  Socket Designation: LGA775
  Type: Central Processor
  Family: Other
  Manufacturer: Intel            
  ID: 76 06 01 00 FF FB EB BF
  Signature: Type 0, Family 6, Model 23, Stepping 6
  Flags:
    FPU (Floating-point unit on-chip)
    VME (Virtual mode extension)
    DE (Debugging extension)
    PSE (Page size extension)
    TSC (Time stamp counter)
    MSR (Model specific registers)
    PAE (Physical address extension)
    MCE (Machine check exception)
    CX8 (CMPXCHG8 instruction supported)
    APIC (On-chip APIC hardware supported)
    SEP (Fast system call)
    MTRR (Memory type range registers)
    PGE (Page global enable)
    MCA (Machine check architecture)
    CMOV (Conditional move instruction supported)
    PAT (Page attribute table)
    PSE-36 (36-bit page size extension)
    CLFSH (CLFLUSH instruction supported)
    DS (Debug store)
    ACPI (ACPI supported)
    MMX (MMX technology supported)
    FXSR (FXSAVE and FXSTOR instructions supported)
    SSE (Streaming SIMD extensions)
    SSE2 (Streaming SIMD extensions 2)
    SS (Self-snoop)
    HTT (Multi-threading)
    TM (Thermal monitor supported)
    PBE (Pending break enabled)
  Version: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz          
  Voltage: 1.1 V
  External Clock: 266 MHz
  Max Speed: 3800 MHz
  Current Speed: 2533 MHz
  Status: Populated, Enabled
  Upgrade: Socket LGA775
  Serial Number: To Be Filled By O.E.M.
  Asset Tag: To Be Filled By O.E.M.
  Part Number: To Be Filled By O.E.M.

Memory Controller Information
  Error Detecting Method: 64-bit ECC
  Error Correcting Capabilities:
    None
  Supported Interleave: One-way Interleave
  Current Interleave: One-way Interleave
  Maximum Memory Module Size: 8192 MB
  Maximum Total Memory Size: 32768 MB
  Supported Speeds:
    Other
  Supported Memory Types:
    DIMM
    SDRAM
  Memory Module Voltage: 3.3 V
  Associated Memory Slots: 4
    0x0009
    0x000A
    0x000B
    0x000C
  Enabled Error Correcting Capabilities:
    None

Memory Module Information
  Socket Designation: DIMM0
  Bank Connections: 0 1
  Current Speed: 30 ns
  Type: DIMM
  Installed Size: 1024 MB (Double-bank Connection)
  Enabled Size: 1024 MB (Double-bank Connection)
  Error Status: OK

Memory Module Information
  Socket Designation: DIMM1
  Bank Connections: 2 3
  Current Speed: 30 ns
  Type: DIMM
  Installed Size: 1024 MB (Double-bank Connection)
  Enabled Size: 1024 MB (Double-bank Connection)
  Error Status: OK

Memory Module Information
  Socket Designation: DIMM2
  Bank Connections: 4 5
  Current Speed: Unknown
  Type: DIMM
  Installed Size: Not Installed
  Enabled Size: Not Installed
  Error Status: OK

Memory Module Information
  Socket Designation: DIMM3
  Bank Connections: 6 7
  Current Speed: Unknown
  Type: DIMM
  Installed Size: Not Installed
  Enabled Size: Not Installed
  Error Status: OK

System Configuration Options
  Option 1: To Be Filled By O.E.M.

BIOS Language Information
  Language Description Format: Abbreviated
  Installable Languages: 1
    en|US|iso8859-1
  Currently Installed Language: en|US|iso8859-1

System Event Log
  Area Length: 4 bytes
  Header Start Offset: 0x0000
  Header Length: 2 bytes
  Data Start Offset: 0x0002
  Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port
  Access Address: Index 0x046A, Data 0x046C
  Status: Invalid, Not Full
  Change Token: 0x00000000
  Header Format: No Header
  Supported Log Type Descriptors: 6
  Descriptor 1: End of log
  Data Format 1: OEM-specific
  Descriptor 2: End of log
  Data Format 2: OEM-specific
  Descriptor 3: End of log
  Data Format 3: OEM-specific
  Descriptor 4: End of log
  Data Format 4: OEM-specific
  Descriptor 5: End of log
  Data Format 5: OEM-specific
  Descriptor 6: End of log
  Data Format 6: OEM-specific

Physical Memory Array
  Location: System Board Or Motherboard
  Use: System Memory
  Error Correction Type: None
  Maximum Capacity: 2 GB
  Number Of Devices: 4

Memory Device
  Total Width: 64 bits
  Data Width: 64 bits
  Size: 1024 MB
  Form Factor: DIMM
  Set: None
  Locator: DIMM0
  Bank Locator: BANK0
  Type: DDR2
  Type Detail: Synchronous
  Speed: 667 MHz
  Manufacturer: Manufacturer0
  Serial Number: SerNum0
  Asset Tag: AssetTagNum0
  Part Number: PartNum0

Memory Device
  Total Width: 64 bits
  Data Width: 64 bits
  Size: 1024 MB
  Form Factor: DIMM
  Set: None
  Locator: DIMM1
  Bank Locator: BANK1
  Type: DDR2
  Type Detail: Synchronous
  Speed: 667 MHz
  Manufacturer: Manufacturer1
  Serial Number: SerNum1
  Asset Tag: AssetTagNum1
  Part Number: PartNum1

Memory Device
  Total Width: Unknown
  Data Width: Unknown
  Size: No Module Installed
  Form Factor: DIMM
  Set: None
  Locator: DIMM2
  Bank Locator: BANK2
  Type: Unknown
  Type Detail: Unknown
  Speed: Unknown
  Manufacturer: Manufacturer2
  Serial Number: SerNum2
  Asset Tag: AssetTagNum2
  Part Number: PartNum2

Memory Device
  Total Width: Unknown
  Data Width: Unknown
  Size: No Module Installed
  Form Factor: DIMM
  Set: None
  Locator: DIMM3
  Bank Locator: BANK3
  Type: Unknown
  Type Detail: Unknown
  Speed: Unknown
  Manufacturer: Manufacturer3
  Serial Number: SerNum3
  Asset Tag: AssetTagNum3
  Part Number: PartNum3

System Boot Information
  Status: No errors detected


Écran et affichage :
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 304mm x 228mm
   1024x768      60.00*+  75.08    75.03    70.07  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    66.67    72.01    60.00    59.94  
   720x400       70.08  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-1 disconnected (normal left inverted right x axis y axis)

Système de fichier :
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
/dev/sda1          106G    4,3G   97G   5% /
udev                10M       0   10M   0% /dev
tmpfs              405M    5,9M  399M   2% /run
tmpfs             1012M     92K 1012M   1% /dev/shm
tmpfs              5,0M    4,0K  5,0M   1% /run/lock
tmpfs             1012M       0 1012M   0% /sys/fs/cgroup
tmpfs              203M    4,0K  203M   1% /run/user/109
tmpfs              203M    8,0K  203M   1% /run/user/1000

Partitionnement :
Disk /dev/sda: 111,8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xdcec3b29

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 226058239 226056192 107,8G 83 Linux
/dev/sda2       226060286 234440703   8380418     4G  5 Extended
/dev/sda5       226060288 234440703   8380416     4G 82 Linux swap / Solaris


Réseau :
    network/interfaces :
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

    resolv.conf :
# Generated by NetworkManager
search home
nameserver 127.0.0.1
nameserver 192.168.1.1

    ifconfig :
eth0      Link encap:Ethernet  HWaddr 00:22:15:69:ac:38  
          inet adr:192.168.1.30  Bcast:192.168.1.255  Masque:255.255.255.0
          adr inet6: fe80::222:15ff:fe69:ac38/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:302 errors:0 dropped:0 overruns:0 frame:0
          TX packets:319 errors:0 dropped:0 overruns:0 carrier:2
          collisions:0 lg file transmission:1000
          RX bytes:124881 (121.9 KiB)  TX bytes:30920 (30.1 KiB)

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:166 errors:0 dropped:0 overruns:0 frame:0
          TX packets:166 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:14833 (14.4 KiB)  TX bytes:14833 (14.4 KiB)


    route :
Table de routage IP du noyau
Destination     Passerelle      Genmask         Indic Metric Ref    Use Iface
0.0.0.0         192.168.1.1     0.0.0.0         UG    1024   0        0 eth0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0

Sources :
/etc/apt/sources.list:
##DEBIAN Jessie##
deb [url]http://httpredir.debian.org/debian/[/url] jessie main contrib non-free
#deb-src [url]http://httpredir.debian.org/debian/[/url] jessie main contrib non-free
deb [url]http://security.debian.org/[/url] jessie/updates main contrib non-free
#deb-src [url]http://security.debian.org/[/url] jessie/updates main contrib non-free
deb [url]http://httpredir.debian.org/debian/[/url] jessie-updates main contrib non-free
#deb-src [url]http://httpredir.debian.org/debian/[/url] jessie-updates main contrib non-free

#deb [url]http://ftp.debian.org/debian/[/url] jessie-backports main contrib non-free
#deb-src [url]http://ftp.debian.org/debian/[/url] jessie-backports main contrib non-free
/etc/apt/sources.list.d/mozilla.list
## Mozilla ##
deb [url]http://mozilla.debian.net/[/url] jessie-backports firefox-release
/etc/apt/sources.list.d/handylinux.list
## HandyLinux Jessie ##
deb [url]http://repo.handylinux.org/debian[/url] jessie main
#deb-src [url]http://repo.handylinux.org/debian[/url] jessie main

## HandyLinux Testing ## @commenter avant le dernier build
#deb [url]http://repo.handylinux.org/debian[/url] testing main
#deb-src [url]http://repo.handylinux.org/debian[/url] testing main
 



Edit : ajout des balises codes. Voir le tuto : Le code, ça pique moins les yeux en couleur

Hors ligne

#4 01-02-2017 19:03:04

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

Bonsoir
mets des balises code sinon çà nous allonge trop le post

[code]Le paragraphe texte[/code]

Dernière modification par Croutons (01-02-2017 19:04:24)


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#5 01-02-2017 19:59:27

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

Bonsoir smile
Quelle est la marque du scanner ?
Dans simple-scan si tu cliques sur le bouton en haut à gauche > Préférences > Sources de numérisation
en cliquant sur la flèche tu ne l'as pas en choix ? Il faut le faire avec le scanner branché et allumé bien sûr.

Hors ligne

#6 02-02-2017 15:41:11

philippechatal
Membre
Inscription : 01-02-2017

Re : DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

salut, l'imprimante est une hp deskjet 3632
l'imprimante est branchée elle fonctionne, le scanner lui aussi fonctionne via un autre ordi mais il n'est pas détecté par le logiciel;
avant tout allait bien je pense qu'une mise a jour automatique a tout chambouler et je ne sais plus quoi faire;
MERCI POUR VOTRE AIDE

Hors ligne

#7 02-02-2017 15:43:18

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

As-tu essayé de réinstaller l'imprimante ?
Le scanner avait-il été testé sur ce PC ?
L'imprimante est-elle reliée en USB au PC ?

Edit : les majuscules sur un forum signifient que l'on "hurle", j'imagine que ce n'est pas ce que tu voulais dire ?

Hors ligne

#8 08-02-2017 10:31:28

psychlem
Membre
Lieu : Paris
Distrib. : Debian 8.7 Jessie
Noyau : 3.16.0-4-amd64
(G)UI : Cinnamon 2.2.16
Inscription : 07-02-2017

Re : DEPUIS MIS A JOUR DEBIAN 8.7 SIMPLE SCAN NE DETECTE PLUS SACANNER

Salut !
J'ai le même soucis avec mon imprimante-scanner Brother DCP-1510 (connexion USB), l'impression fonctionne sous Debian mais pas le scanner sad
Simple Scan reconnaît le périphérique. Lorsque je lance la numérisation, le scanner indique "récéption des données" et trois secondes plus tard, se remet en veille. Je précise que le scanner fonctionne sur Windows.

Mon problème a été résolu, j'ai ajouté les utilisateurs au groupe "lp"
Tu peux jeter un coup d'oeil sur https://wiki.debian.org/fr/Scanner

sudo addgroup user lp





J'espère que ça fonctionnera aussi pour toi smile

Dernière modification par psychlem (08-02-2017 10:49:26)

Hors ligne

Pied de page des forums