logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 12-02-2017 18:23:15

Ashardalon
Membre
Distrib. : Debian stretch
Noyau : Linux 4.9.0-2-amd64
(G)UI : xfce
Inscription : 14-01-2017

résolution d'écran, blabla, Résolu !

Bonjour à tous,

je suis actuellement  confronté aux problèmes hardware suivants:

la configuration du clavier a été configuré en tant que "français(Belgique)" or si le clavier est bien en azerty, certaines touches ne correspondent pas et les modes "numlock","scr lock" ainsi que les commandes spéciales liées à la touche "Fn" ne répondent plus. Ou comment décourager l'utilisation de mots de passes avec des chiffres... crash.gif

La résolution d'écran est bloquée en 800X600, Même en allant dans les paramèttres de configuration en mode graphique, il ne me propose que cette résolution là. (problèmme de driver ? carte graphique: NVIDIA GeForce 940MX graphics) Je préfère donc faire appel à votre expertise avant toute manipulation sur le terminal.

Le wifi ne fonctionne pas et je n'ai pas la moindre idée si cela est du à un driver manquant ou une mauvaise configuration. Je n'ai jamais fait de configuration réseau wifi sous linux et je suis donc un peu perdu à ce niveau.

Merci d'avance !

Dernière modification par Ashardalon (31-03-2017 14:33:43)

Hors ligne

#2 12-02-2017 18:52:48

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

Hello Ashardalon,

Cool, trois problèmes pour le prix d'un (ceci dit, ça va râler au niveau modo, le principe c'est un fil par souci... petit ou grand). Alors puisqu'il s'agit d'un portable, pourrais-tu commencer par nous en donner les références exactes et précises (marque et modèle) ? Ensuite, dans la foulée, du classique pour présenter le matériel :

lspci -nnk

lsusb


Pour ce qui concerne le clavier (disposition et verrouillage) :

setxkbmap -query

apt-cache policy numlockx laptop-detect


La GeForce 940MX semble relativement récente, mais devrait être prise en charge par le pilote libre 'nouveau' ; certaines cartes NVIDIA récentes requièrent un firmware non libre, anonyme nous dira si c'est le cas de celle-ci. Quoi qu'il en soit, tu peux d'ores et déjà poster les retours des commandes suivantes :

dmesg

cat /var/log/Xorg.0.log


N'hésite surtout pas à employer les balises qui vont bien en postant les retours smile

Dernière modification par èfpé (12-02-2017 19:08:48)

Hors ligne

#3 12-02-2017 19:16:56

Ashardalon
Membre
Distrib. : Debian stretch
Noyau : Linux 4.9.0-2-amd64
(G)UI : xfce
Inscription : 14-01-2017

Re : résolution d'écran, blabla, Résolu !

Entendu je ferai plus attention la prochaine fois !

ashardalon@Nomade:~$ lspci -nnk


00:00.0 Host bridge [0600]: Intel Corporation Device [8086:1904] (rev 08)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:1916] (rev 07)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
00:08.0 System peripheral [0880]: Intel Corporation Device [8086:1911]
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
00:14.0 USB controller [0c03]: Intel Corporation Device [8086:9d2f] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
  Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller [1180]: Intel Corporation Device [8086:9d31] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
00:16.0 Communication controller [0780]: Intel Corporation Device [8086:9d3a] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
00:17.0 SATA controller [0106]: Intel Corporation Device [8086:9d03] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
  Kernel driver in use: ahci
00:1c.0 PCI bridge [0604]: Intel Corporation Device [8086:9d10] (rev f1)
  Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation Device [8086:9d14] (rev f1)
  Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation Device [8086:9d1a] (rev f1)
  Kernel driver in use: pcieport
00:1d.3 PCI bridge [0604]: Intel Corporation Device [8086:9d1b] (rev f1)
  Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:9d48] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
00:1f.2 Memory controller [0580]: Intel Corporation Device [8086:9d21] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
00:1f.3 Audio device [0403]: Intel Corporation Device [8086:9d70] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
  Kernel driver in use: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation Device [8086:9d23] (rev 21)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
01:00.0 3D controller [0302]: NVIDIA Corporation Device [10de:134d] (rev a2)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
02:00.0 USB controller [0c03]: ASMedia Technology Inc. Device [1b21:1242]
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
  Kernel driver in use: xhci_hcd
03:00.0 Network controller [0280]: Intel Corporation Device [8086:3165] (rev 81)
  Subsystem: Intel Corporation Device [8086:4010]
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
  Kernel driver in use: r8169
 



ashardalon@Nomade:~$ lsusb


Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 003: ID 8087:0a2a Intel Corp.
Bus 001 Device 002: ID 05c8:039c Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 005: ID 0461:4d0f Primax Electronics, Ltd HP Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 



clavier:

ashardalon@Nomade:~$ setxkbmap -query


rules:      evdev
model:      pc105
layout:     be,us,us
variant:    ,,
 



ashardalon@Nomade:~$ apt-cache policy numlockx laptop-detect


numlockx:
  Installé : (aucun)
  Candidat : 1.2-7
 Table de version :
     1.2-7 0
        500 [url]http://ftp.be.debian.org/debian/[/url] jessie/main amd64 Packages
laptop-detect:
  Installé : 0.13.7
  Candidat : 0.13.7
 Table de version :
 *** 0.13.7 0
        500 cdrom://[Debian GNU/Linux 8.6.0 _Jessie_ - Official Multi-architecture i386/amd64/source DVD #1 20160917-18:47]/ jessie/main amd64 Packages
        500 [url]http://ftp.be.debian.org/debian/[/url] jessie/main amd64 Packages
        100 /var/lib/dpkg/status
 



Carte Graphique (help balise "spoiler" requise aide demandée d'urgence merci ! sos.gif)

ashardalon@Nomade:~$ dmesg


[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=3dfdd143-a2a7-4617-b06f-312afd78c363 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000789b3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000789b4000-0x00000000789b4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000789b5000-0x00000000789defff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000789df000-0x000000007bb75fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bb76000-0x000000007c611fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c612000-0x000000007c641fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007c642000-0x000000007cbcffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007cbd0000-0x000000007d2a3fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007d2a4000-0x000000007d2fdfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007d2fe000-0x000000007d2fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d300000-0x000000007d3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000037effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x7c61b000  ACPI 2.0=0x7c61b000  SMBIOS=0x7d1d8000
[    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[    0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
[    0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001018000) (15MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001018000-0x0000000001200000) (1MB)
[    0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002118000) (15MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002118000-0x0000000036344000) (834MB)
[    0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000036344000-0x000000003719a000) (14MB)
[    0.000000] efi: mem09: type=7, attr=0xf, range=[0x000000003719a000-0x0000000052c15000) (442MB)
[    0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000052c15000-0x0000000070a4a000) (478MB)
[    0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000070a4a000-0x0000000070a8a000) (0MB)
[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000070a8a000-0x0000000077793000) (109MB)
[    0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000077793000-0x00000000777b1000) (0MB)
[    0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000777b1000-0x00000000789b4000) (18MB)
[    0.000000] efi: mem15: type=10, attr=0xf, range=[0x00000000789b4000-0x00000000789b5000) (0MB)
[    0.000000] efi: mem16: type=6, attr=0x800000000000000f, range=[0x00000000789b5000-0x00000000789df000) (0MB)
[    0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000789df000-0x0000000078a3a000) (0MB)
[    0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000078a3a000-0x0000000079d31000) (18MB)
[    0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000079d31000-0x000000007b576000) (24MB)
[    0.000000] efi: mem20: type=7, attr=0xf, range=[0x000000007b576000-0x000000007b7e5000) (2MB)
[    0.000000] efi: mem21: type=2, attr=0xf, range=[0x000000007b7e5000-0x000000007b7ef000) (0MB)
[    0.000000] efi: mem22: type=3, attr=0xf, range=[0x000000007b7ef000-0x000000007bb76000) (3MB)
[    0.000000] efi: mem23: type=0, attr=0xf, range=[0x000000007bb76000-0x000000007c612000) (10MB)
[    0.000000] efi: mem24: type=9, attr=0xf, range=[0x000000007c612000-0x000000007c642000) (0MB)
[    0.000000] efi: mem25: type=10, attr=0xf, range=[0x000000007c642000-0x000000007cbd0000) (5MB)
[    0.000000] efi: mem26: type=6, attr=0x800000000000000f, range=[0x000000007cbd0000-0x000000007d2a4000) (6MB)
[    0.000000] efi: mem27: type=5, attr=0x800000000000000f, range=[0x000000007d2a4000-0x000000007d2fe000) (0MB)
[    0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000007d2fe000-0x000000007d2ff000) (0MB)
[    0.000000] efi: mem29: type=7, attr=0xf, range=[0x0000000100000000-0x000000037f000000) (10224MB)
[    0.000000] efi: mem30: type=0, attr=0x0, range=[0x000000007d300000-0x000000007d400000) (1MB)
[    0.000000] efi: mem31: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem32: type=11, attr=0x8000000000000001, range=[0x00000000fe000000-0x00000000fe011000) (0MB)
[    0.000000] efi: mem33: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem34: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem35: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[    0.000000] SMBIOS 3.0 present.
[    0.000000] DMI: PEAQ PEAQ PNB P2015 - I5B1/MA50LS, BIOS MA50Lx_1.04.MN 04/13/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x37f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007E000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 007D800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0x7d2ff max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01cf4000, 0x01cf4fff] PGTABLE
[    0.000000] BRK [0x01cf5000, 0x01cf5fff] PGTABLE
[    0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x37ee00000-0x37effffff]
[    0.000000]  [mem 0x37ee00000-0x37effffff] page 2M
[    0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x37c000000-0x37edfffff]
[    0.000000]  [mem 0x37c000000-0x37edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x300000000-0x37bffffff]
[    0.000000]  [mem 0x300000000-0x33fffffff] page 1G
[    0.000000]  [mem 0x340000000-0x37bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x789b3fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x787fffff] page 2M
[    0.000000]  [mem 0x78800000-0x789b3fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x789df000-0x7bb75fff]
[    0.000000]  [mem 0x789df000-0x789fffff] page 4k
[    0.000000]  [mem 0x78a00000-0x7b9fffff] page 2M
[    0.000000]  [mem 0x7ba00000-0x7bb75fff] page 4k
[    0.000000] BRK [0x01cf8000, 0x01cf8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x7d2fe000-0x7d2fefff]
[    0.000000]  [mem 0x7d2fe000-0x7d2fefff] page 4k
[    0.000000] BRK [0x01cf9000, 0x01cf9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
[    0.000000]  [mem 0x100000000-0x2ffffffff] page 1G
[    0.000000] RAMDISK: [mem 0x36344000-0x37199fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007C61B000 000024 (v02 MEDION)
[    0.000000] ACPI: XSDT 0x000000007C61B0A0 0000BC (v01 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007C639218 00010C (v05 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007C61B1E8 01E02C (v02 MEDION MEDIONAG 01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000007CBCFF80 000040
[    0.000000] ACPI: APIC 0x000000007C639328 000084 (v03 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007C6393B0 000044 (v01 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007C6393F8 00009C (v01 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007C639498 00003C (v01 MEDION MEDIONAG 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007C6394D8 000038 (v01 MEDION MEDIONAG 01072009 AMI. 0005000B)
[    0.000000] ACPI: DBGP 0x000000007C639510 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007C639548 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: MSDM 0x000000007C6395A0 000055 (v03 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007C6395F8 005554 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x000000007C63EB50 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000007C63EB98 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: BGRT 0x000000007C63FA10 000038 (v01 MEDION MEDIONAG 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007C63FA48 000696 (v02 SgRef  SgPch    00001000 INTL 20120913)
[    0.000000] ACPI: DMAR 0x000000007C6400E0 0000A8 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: TPM2 0x000000007C640188 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007C6401C0 001922 (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007C641AE8 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120913)
[    0.000000] ACPI: ASF! 0x000000007C641BA0 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000037effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x37effffff]
[    0.000000]   NODE_DATA [mem 0x37eff9000-0x37effdfff]
[    0.000000]  [ffffea0000000000-ffffea000c3fffff] PMD -> [ffff880372600000-ffff88037cdfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x37effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00057fff]
[    0.000000]   node   0: [mem 0x00059000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x789b3fff]
[    0.000000]   node   0: [mem 0x789df000-0x7bb75fff]
[    0.000000]   node   0: [mem 0x7d2fe000-0x7d2fefff]
[    0.000000]   node   0: [mem 0x100000000-0x37effffff]
[    0.000000] On node 0 totalpages: 3123944
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6872 pages used for memmap
[    0.000000]   DMA32 zone: 502604 pages, LIFO batch:31
[    0.000000]   Normal zone: 35784 pages used for memmap
[    0.000000]   Normal zone: 2617344 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 136
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x789b4000-0x789b4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x789b5000-0x789defff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bb76000-0x7c611fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c612000-0x7c641fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c642000-0x7cbcffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7cbd0000-0x7d2a3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d2a4000-0x7d2fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d2ff000-0x7d2fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d300000-0x7d3fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d400000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7d400000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88037ec00000 s80960 r8192 d21440 u524288
[    0.000000] pcpu-alloc: s80960 r8192 d21440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3081210
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=3dfdd143-a2a7-4617-b06f-312afd78c363 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x1f, cntxt size 0x440
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 12183440K/12495776K available (5237K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 312336K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using HPET reference calibration
[    0.000000] tsc: Detected 2398.941 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4797.88 BogoMIPS (lpj=9595764)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20140424
[    0.032278] ACPI: All ACPI Tables successfully acquired
[    0.033031] Security Framework initialized
[    0.033038] AppArmor: AppArmor disabled by boot time parameter
[    0.033039] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.034005] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.037115] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.038452] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.038469] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.038699] Initializing cgroup subsys memory
[    0.038703] Initializing cgroup subsys devices
[    0.038709] Initializing cgroup subsys freezer
[    0.038711] Initializing cgroup subsys net_cls
[    0.038715] Initializing cgroup subsys blkio
[    0.038718] Initializing cgroup subsys perf_event
[    0.038720] Initializing cgroup subsys net_prio
[    0.038749] CPU: Physical Processor ID: 0
[    0.038750] CPU: Processor Core ID: 0
[    0.038754] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.040576] mce: CPU supports 8 MCE banks
[    0.040593] CPU0: Thermal monitoring enabled (TM1)
[    0.040602] process: using mwait in idle threads
[    0.040605] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
tlb_flushall_shift: 6
[    0.040966] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.043576] ftrace: allocating 21697 entries in 85 pages
[    0.052024] dmar: Host address width 39
[    0.052026] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.052035] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.052037] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.052043] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.052044] dmar: RMRR base: 0x0000007c3b4000 end: 0x0000007c3d3fff
[    0.052045] dmar: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
[    0.053249] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.053250] HPET id 0 under DRHD base 0xfed91000
[    0.053251] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.053390] Enabled IRQ remapping in x2apic mode
[    0.053392] Enabling x2apic
[    0.053393] Enabled x2apic
[    0.053403] Switched APIC routing to cluster x2apic.
[    0.057484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.097182] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (fam: 06, model: 4e, stepping: 03)
[    0.097192] TSC deadline timer enabled
[    0.097213] Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[    0.097218] ... version:                4
[    0.097219] ... bit width:              48
[    0.097220] ... generic registers:      4
[    0.097221] ... value mask:             0000ffffffffffff
[    0.097222] ... max period:             0000ffffffffffff
[    0.097222] ... fixed-purpose events:   3
[    0.097223] ... event mask:             000000070000000f
[    0.098694] x86: Booting SMP configuration:
[    0.098696] .... node  #0, CPUs:      #1
[    0.113570] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.113653]  #2 #3
[    0.143436] x86: Booted up 1 node, 4 CPUs
[    0.143439] smpboot: Total of 4 processors activated (19191.52 BogoMIPS)
[    0.147351] devtmpfs: initialized
[    0.150338] PM: Registering ACPI NVS region [mem 0x789b4000-0x789b4fff] (4096 bytes)
[    0.150340] PM: Registering ACPI NVS region [mem 0x7c642000-0x7cbcffff] (5824512 bytes)
[    0.151179] pinctrl core: initialized pinctrl subsystem
[    0.151245] NET: Registered protocol family 16
[    0.151353] cpuidle: using governor ladder
[    0.151356] cpuidle: using governor menu
[    0.151400] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.151401] ACPI: bus type PCI registered
[    0.151403] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.151489] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.151491] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.151739] PCI: Using configuration type 1 for base access
[    0.163863] ACPI: Added _OSI(Module Device)
[    0.163865] ACPI: Added _OSI(Processor Device)
[    0.163866] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.163867] ACPI: Added _OSI(Processor Aggregator Device)
[    0.191724] ACPI: Executed 19 blocks of module-level executable AML code
[    0.231627] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.255785] ACPI: Dynamic OEM Table Load:
[    0.255791] ACPI: SSDT 0xFFFF8803710F8000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.256686] ACPI: Dynamic OEM Table Load:
[    0.256691] ACPI: SSDT 0xFFFF8803710F2000 00061E (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.276189] ACPI: Dynamic OEM Table Load:
[    0.276194] ACPI: SSDT 0xFFFF880371146800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.285963] ACPI: Dynamic OEM Table Load:
[    0.285968] ACPI: SSDT 0xFFFF8803710A6800 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.355878] ACPI: Interpreter enabled
[    0.355886] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.355894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.355914] ACPI: (supports S0 S3 S4 S5)
[    0.355915] ACPI: Using IOAPIC for interrupt routing
[    0.355951] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.357833] ACPI: Power Resource [PG00] (on)
[    0.358150] ACPI: Power Resource [PG01] (on)
[    0.358451] ACPI: Power Resource [PG02] (on)
[    0.359714] ACPI: Power Resource [WRST] (on)
[    0.359973] ACPI: Power Resource [WRST] (on)
[    0.360227] ACPI: Power Resource [WRST] (on)
[    0.360480] ACPI: Power Resource [WRST] (on)
[    0.360732] ACPI: Power Resource [WRST] (on)
[    0.360780] ACPI: Power Resource [PC09] (on)
[    0.380551] ACPI: Power Resource [WRST] (on)
[    0.380803] ACPI: Power Resource [WRST] (on)
[    0.381057] ACPI: Power Resource [WRST] (on)
[    0.381310] ACPI: Power Resource [WRST] (on)
[    0.381564] ACPI: Power Resource [WRST] (on)
[    0.381816] ACPI: Power Resource [WRST] (on)
[    0.382069] ACPI: Power Resource [WRST] (on)
[    0.382323] ACPI: Power Resource [WRST] (on)
[    0.382575] ACPI: Power Resource [WRST] (on)
[    0.382828] ACPI: Power Resource [WRST] (on)
[    0.383080] ACPI: Power Resource [WRST] (on)
[    0.383333] ACPI: Power Resource [WRST] (on)
[    0.383587] ACPI: Power Resource [WRST] (on)
[    0.383839] ACPI: Power Resource [WRST] (on)
[    0.390468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.390474] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.390506] \_SB_.PCI0:_OSC invalid UUID
[    0.390507] _OSC request data:1 1f 0
[    0.390510] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.391195] PCI host bridge to bus 0000:00
[    0.391197] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.391199] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.391200] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.391202] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.391203] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.391204] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.391206] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.391207] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.391208] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.391209] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.391211] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.391212] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.391213] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.391214] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.391215] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.391217] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.391218] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.391219] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
[    0.391220] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
[    0.391229] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.391510] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.391520] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.391528] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.391532] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.391676] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.391690] pci 0000:00:08.0: reg 0x10: [mem 0xdf42f000-0xdf42ffff 64bit]
[    0.391855] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.391876] pci 0000:00:14.0: reg 0x10: [mem 0xdf410000-0xdf41ffff 64bit]
[    0.391945] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.392025] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.392068] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.392088] pci 0000:00:14.2: reg 0x10: [mem 0xdf42e000-0xdf42efff 64bit]
[    0.392264] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.392288] pci 0000:00:16.0: reg 0x10: [mem 0xdf42d000-0xdf42dfff 64bit]
[    0.392365] pci 0000:00:16.0: PME# supported from D3hot
[    0.392489] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.392507] pci 0000:00:17.0: reg 0x10: [mem 0xdf428000-0xdf429fff]
[    0.392516] pci 0000:00:17.0: reg 0x14: [mem 0xdf42c000-0xdf42c0ff]
[    0.392524] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.392531] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.392539] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.392547] pci 0000:00:17.0: reg 0x24: [mem 0xdf42b000-0xdf42b7ff]
[    0.392592] pci 0000:00:17.0: PME# supported from D3hot
[    0.392704] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.392769] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.392840] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.392883] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.392956] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.393028] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.393071] pci 0000:00:1d.0: [8086:9d1a] type 01 class 0x060400
[    0.393135] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.393206] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.393245] pci 0000:00:1d.3: [8086:9d1b] type 01 class 0x060400
[    0.393309] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[    0.393379] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.393430] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.393621] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.393631] pci 0000:00:1f.2: reg 0x10: [mem 0xdf424000-0xdf427fff]
[    0.393767] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.393791] pci 0000:00:1f.3: reg 0x10: [mem 0xdf420000-0xdf423fff 64bit]
[    0.393817] pci 0000:00:1f.3: reg 0x20: [mem 0xdf400000-0xdf40ffff 64bit]
[    0.393867] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.393945] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.393985] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.394031] pci 0000:00:1f.4: reg 0x10: [mem 0xdf42a000-0xdf42a0ff 64bit]
[    0.394101] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.394339] pci 0000:01:00.0: [10de:134d] type 00 class 0x030200
[    0.394365] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.394388] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.394411] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.394427] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.394442] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.394592] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.399918] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.399921] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.399924] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.399929] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.400068] pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330
[    0.400092] pci 0000:02:00.0: reg 0x10: [mem 0xdf300000-0xdf307fff 64bit]
[    0.400215] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.400251] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.407970] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.407974] pci 0000:00:1c.4:   bridge window [mem 0xdf300000-0xdf3fffff]
[    0.408088] pci 0000:03:00.0: [8086:3165] type 00 class 0x028000
[    0.408129] pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[    0.408308] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.408371] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.415958] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.415963] pci 0000:00:1d.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.416063] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.416086] pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.416118] pci 0000:04:00.0: reg 0x18: [mem 0xdf100000-0xdf100fff 64bit]
[    0.416140] pci 0000:04:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.416241] pci 0000:04:00.0: supports D1 D2
[    0.416242] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.416294] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.423973] pci 0000:00:1d.3: PCI bridge to [bus 04]
[    0.423975] pci 0000:00:1d.3:   bridge window [io  0xd000-0xdfff]
[    0.423978] pci 0000:00:1d.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.423983] pci 0000:00:1d.3:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.424001] pci 0000:01:00.0: Max Payload Size 128, but upstream 0000:00:1c.0 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
[    0.425350] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425400] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.425448] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425495] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425587] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425634] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425680] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.425993] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.426091] ACPI : EC: GPE = 0x51, I/O: command/status = 0x66, data = 0x62
[    0.426197] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.426199] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.426202] vgaarb: loaded
[    0.426203] vgaarb: bridge control possible 0000:00:02.0
[    0.426293] PCI: Using ACPI for IRQ routing
[    0.454207] PCI: pci_cache_line_size set to 64 bytes
[    0.454292] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.454293] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.454295] e820: reserve RAM buffer [mem 0x789b4000-0x7bffffff]
[    0.454296] e820: reserve RAM buffer [mem 0x7bb76000-0x7bffffff]
[    0.454297] e820: reserve RAM buffer [mem 0x7d2ff000-0x7fffffff]
[    0.454299] e820: reserve RAM buffer [mem 0x37f000000-0x37fffffff]
[    0.454452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.454457] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.456503] Switched to clocksource hpet
[    0.461090] pnp: PnP ACPI init
[    0.461100] ACPI: bus type PNP registered
[    0.461288] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.461291] system 00:00: [io  0xffff] has been reserved
[    0.461293] system 00:00: [io  0xffff] has been reserved
[    0.461294] system 00:00: [io  0xffff] has been reserved
[    0.461296] system 00:00: [io  0x1800-0x18fe] could not be reserved
[    0.461298] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.461300] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461393] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.461431] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.461433] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.461667] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.461669] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.461671] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.461672] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.461674] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.461676] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.461678] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.461679] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.461681] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.461683] system 00:03: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.461684] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461727] system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.461729] system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.461730] system 00:04: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.461732] system 00:04: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.461734] system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.461735] system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.461737] system 00:04: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.461739] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461979] system 00:05: [io  0xff00-0xfffe] has been reserved
[    0.461981] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.462953] system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.462955] system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.462956] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.462958] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.462959] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.462961] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.463440] pnp 00:07: Plug and Play ACPI device, IDs SYN0e11 SYN0e00 SYN0002 PNP0f13 (active)
[    0.463478] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.463693] pnp: PnP ACPI: found 9 devices
[    0.463694] ACPI: bus type PNP unregistered
[    0.472066] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.472069] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.472073] pci 0000:00:1c.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.472076] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.472080] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.472084] pci 0000:00:1c.4:   bridge window [mem 0xdf300000-0xdf3fffff]
[    0.472090] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.472093] pci 0000:00:1d.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.472099] pci 0000:00:1d.3: PCI bridge to [bus 04]
[    0.472101] pci 0000:00:1d.3:   bridge window [io  0xd000-0xdfff]
[    0.472104] pci 0000:00:1d.3:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.472107] pci 0000:00:1d.3:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.472112] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.472114] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.472115] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.472117] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.472118] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.472119] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.472121] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.472122] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.472123] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.472124] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.472126] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.472127] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.472128] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.472130] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.472131] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.472132] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.472133] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff]
[    0.472135] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff]
[    0.472136] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.472137] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.472139] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.472140] pci_bus 0000:02: resource 1 [mem 0xdf300000-0xdf3fffff]
[    0.472141] pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.472143] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.472144] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.472145] pci_bus 0000:04: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.472322] NET: Registered protocol family 2
[    0.472733] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.472934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.473057] TCP: Hash tables configured (established 131072 bind 65536)
[    0.473069] TCP: reno registered
[    0.473084] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.473128] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.473253] NET: Registered protocol family 1
[    0.473271] pci 0000:00:02.0: Video device with shadowed ROM
[    0.473720] PCI: CLS 0 bytes, default 64
[    0.473759] Unpacking initramfs...
[    0.745656] Freeing initrd memory: 14680K (ffff880036344000 - ffff88003719a000)
[    0.745835] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.745837] software IO TLB [mem 0x737b1000-0x777b1000] (64MB) mapped at [ffff8800737b1000-ffff8800777b0fff]
[    0.746092] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x88
[    0.746101] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x88
[    0.746112] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x88
[    0.746122] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x88
[    0.746194] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.746252] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x1d5000 bytes, mapped to 0xffffc90011c00000
[    0.746254] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
[    0.747326] Console: switching to colour frame buffer device 100x37
[    0.748290] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.748572] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.748615] audit: initializing netlink subsys (disabled)
[    0.748629] audit: type=2000 audit(1486918074.756:1): initialized
[    0.749060] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.749079] zbud: loaded
[    0.749474] VFS: Disk quotas dquot_6.5.2
[    0.749500] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.749558] msgmni has been set to 23917
[    0.750260] alg: No test for stdrng (krng)
[    0.750315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.750428] io scheduler noop registered
[    0.750431] io scheduler deadline registered
[    0.750505] io scheduler cfq registered (default)
[    0.751044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.751058] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.751078] intel_idle: does not run on family 6 model 78
[    0.751115] GHES: HEST is not enabled!
[    0.751210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.751841] Linux agpgart interface v0.103
[    0.751945] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.761363] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.761366] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.761551] mousedev: PS/2 mouse device common for all mice
[    0.762052] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.762142] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.762155] ledtrig-cpu: registered to indicate activity on CPUs
[    0.762758] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.762759] AMD IOMMUv2 functionality not available on this system
[    0.762834] TCP: cubic registered
[    0.763026] NET: Registered protocol family 10
[    0.763334] mip6: Mobile IPv6
[    0.763338] NET: Registered protocol family 17
[    0.763350] mpls_gso: MPLS GSO support
[    0.763768] registered taskstats version 1
[    0.765206] rtc_cmos 00:01: setting system clock to 2017-02-12 16:47:55 UTC (1486918075)
[    0.765279] PM: Hibernation image not present or could not be loaded.
[    0.765964] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    0.765965] Write protecting the kernel read-only data: 8192k
[    0.766305] Freeing unused kernel memory: 896K (ffff880001720000 - ffff880001800000)
[    0.766678] Freeing unused kernel memory: 212K (ffff8800019cb000 - ffff880001a00000)
[    0.771626] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.775184] systemd-udevd[71]: starting version 215
[    0.775395] random: systemd-udevd urandom read with 67 bits of entropy available
[    0.796174] [Firmware Bug]: No valid trip found
[    0.797798] SCSI subsystem initialized
[    0.797977] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.797986] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.798477] thermal LNXTHERM:01: registered as thermal_zone0
[    0.798480] ACPI: Thermal Zone [TZ01] (18 C)
[    0.801778] ACPI: bus type USB registered
[    0.801811] usbcore: registered new interface driver usbfs
[    0.801825] usbcore: registered new interface driver hub
[    0.801989] libata version 3.00 loaded.
[    0.802718] ahci 0000:00:17.0: version 3.0
[    0.802929] ahci 0000:00:17.0: irq 138 for MSI/MSI-X
[    0.803285] usbcore: registered new device driver usb
[    0.805342] r8169 0000:04:00.0: irq 139 for MSI/MSI-X
[    0.805597] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc900018d6000, b8:ae:ed:09:f1:14, XID 0c000880 IRQ 139
[    0.805600] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.816910] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[    0.816913] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[    0.817469] scsi0 : ahci
[    0.817853] scsi1 : ahci
[    0.818136] scsi2 : ahci
[    0.818177] ata1: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b100 irq 138
[    0.818179] ata2: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b180 irq 138
[    0.818183] ata3: SATA max UDMA/133 abar m2048@0xdf42b000 port 0xdf42b200 irq 138
[    0.818408] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.818415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.819501] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.819521] xhci_hcd 0000:00:14.0: irq 140 for MSI/MSI-X
[    0.819764] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.819766] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.819768] usb usb1: Product: xHCI Host Controller
[    0.819769] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.819771] usb usb1: SerialNumber: 0000:00:14.0
[    0.819993] hub 1-0:1.0: USB hub found
[    0.820051] hub 1-0:1.0: 12 ports detected
[    0.825780] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.825783] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.825816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.825817] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.825819] usb usb2: Product: xHCI Host Controller
[    0.825820] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.825821] usb usb2: SerialNumber: 0000:00:14.0
[    0.825953] hub 2-0:1.0: USB hub found
[    0.825974] hub 2-0:1.0: 6 ports detected
[    0.828899] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.828903] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    0.887851] xhci_hcd 0000:02:00.0: irq 141 for MSI/MSI-X
[    0.887856] xhci_hcd 0000:02:00.0: irq 142 for MSI/MSI-X
[    0.887860] xhci_hcd 0000:02:00.0: irq 143 for MSI/MSI-X
[    0.887864] xhci_hcd 0000:02:00.0: irq 144 for MSI/MSI-X
[    0.887868] xhci_hcd 0000:02:00.0: irq 145 for MSI/MSI-X
[    0.887975] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.887976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.887977] usb usb3: Product: xHCI Host Controller
[    0.887979] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.887980] usb usb3: SerialNumber: 0000:02:00.0
[    0.888116] hub 3-0:1.0: USB hub found
[    0.888125] hub 3-0:1.0: 2 ports detected
[    0.888201] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    0.888204] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    0.888229] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.888243] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.888244] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888245] usb usb4: Product: xHCI Host Controller
[    0.888246] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[    0.888247] usb usb4: SerialNumber: 0000:02:00.0
[    0.888376] hub 4-0:1.0: USB hub found
[    0.888386] hub 4-0:1.0: 2 ports detected
[    1.082582] random: nonblocking pool is initialized
[    1.137156] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.137181] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.137341] ata3.00: ATA-10: SSD PHISON 128GB PS3109-S9, S9FM02.6, max UDMA/133
[    1.137343] ata3.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.137523] ata3.00: configured for UDMA/133
[    1.139034] ata2.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[    1.141137] ata2.00: configured for UDMA/133
[    1.193141] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    1.193146] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.199558] ata1.00: ATA-8: ST1500LM006 HN-M151RAD, 2BE10001, max UDMA/133
[    1.199559] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.205991] ata1.00: configured for UDMA/133
[    1.206149] scsi 0:0:0:0: Direct-Access     ATA      ST1500LM006 HN-M 0001 PQ: 0 ANSI: 5
[    1.207439] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUD0N     1.00 PQ: 0 ANSI: 5
[    1.213893] scsi 2:0:0:0: Direct-Access     ATA      SSD PHISON 128GB 02.6 PQ: 0 ANSI: 5
[    1.216421] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    1.216424] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.216653] sd 0:0:0:0: [sda] Write Protect is off
[    1.216655] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.216734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.222638] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.222640] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.222762] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.222914] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.223062] sd 2:0:0:0: [sdb] Write Protect is off
[    1.223065] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.223184] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.223337] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.223459] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.223521] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.225322]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[    1.226181] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.430873] usb 1-3: New USB device found, idVendor=05c8, idProduct=039c
[    1.430876] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.430878] usb 1-3: Product: Webcam HD
[    1.430879] usb 1-3: Manufacturer: Foxlink
[    1.430880] usb 1-3: SerialNumber: 200901010001
[    1.463727]  sda: sda1 sda2 sda3 sda4
[    1.464329] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.601468] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    1.693954] psmouse serio1: synaptics: queried max coordinates: x [..5662], y [..4634]
[    1.736369] psmouse serio1: synaptics: queried min coordinates: x [1344..], y [1298..]
[    1.745609] tsc: Refined TSC clocksource calibration: 2399.989 MHz
[    1.786583] usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
[    1.786586] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.804361] PM: Starting manual resume from disk
[    1.804365] PM: Hibernation image partition 8:3 present
[    1.804366] PM: Looking for hibernation image.
[    1.804493] PM: Image not found (code -22)
[    1.804495] PM: Hibernation image not present or could not be loaded.
[    1.821010] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00323/0x840300/0x12e800, board id: 3002, fw id: 1770968
[    1.835757] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    1.875146] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    1.876513] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[    1.926081] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    1.926195] systemd[1]: Detected architecture 'x86-64'.
[    1.936416] systemd[1]: Inserted module 'autofs4'
[    1.936638] systemd[1]: Set hostname to <Nomade>.
[    1.953766] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    1.986460] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    1.986513] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.986529] systemd[1]: Starting Remote File Systems (Pre).
[    1.986555] systemd[1]: Reached target Remote File Systems (Pre).
[    1.986570] systemd[1]: Starting Encrypted Volumes.
[    1.986584] systemd[1]: Reached target Encrypted Volumes.
[    1.986599] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    1.986625] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.986646] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    1.986772] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.986788] systemd[1]: Expecting device dev-disk-by\x2duuid-9021a078\x2d71f2\x2d4cca\x2dafa5\x2de271d3175c9b.device...
[    1.986802] systemd[1]: Expecting device dev-disk-by\x2duuid-5F0B\x2d1C79.device...
[    1.986816] systemd[1]: Expecting device dev-disk-by\x2duuid-69d86105\x2da6db\x2d41c9\x2d92d0\x2df9de124131f3.device...
[    1.986829] systemd[1]: Expecting device dev-disk-by\x2duuid-82fa2cfe\x2d6882\x2d4ff5\x2da457\x2db20067da1b86.device...
[    1.986843] systemd[1]: Expecting device dev-disk-by\x2duuid-2a842f4f\x2dfe05\x2d4142\x2da852\x2dc88f7026dda9.device...
[    1.986856] systemd[1]: Expecting device dev-disk-by\x2duuid-21e99aa1\x2dfaa1\x2d4fc8\x2d9956\x2d0498d3f3f8f0.device...
[    1.986869] systemd[1]: Expecting device dev-disk-by\x2duuid-ee01be27\x2dea80\x2d42d3\x2d8ab7\x2df55728b33f33.device...
[    1.986883] systemd[1]: Expecting device dev-disk-by\x2duuid-eb3390cf\x2db99b\x2d4ebc\x2da35f\x2d4a1844491fee.device...
[    1.986896] systemd[1]: Expecting device dev-disk-by\x2duuid-8f05e91e\x2db7b8\x2d4ced\x2db7c5\x2dfc407b517fb0.device...
[    1.986909] systemd[1]: Expecting device dev-disk-by\x2duuid-c4dac92c\x2defb7\x2d4a63\x2db6c3\x2d95d007dfd595.device...
[    1.986922] systemd[1]: Starting Root Slice.
[    1.986945] systemd[1]: Created slice Root Slice.
[    1.986958] systemd[1]: Starting User and Session Slice.
[    1.986991] systemd[1]: Created slice User and Session Slice.
[    1.987005] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    1.987034] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.987048] systemd[1]: Starting Delayed Shutdown Socket.
[    1.987070] systemd[1]: Listening on Delayed Shutdown Socket.
[    1.987083] systemd[1]: Starting Journal Socket (/dev/log).
[    1.987108] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.987122] systemd[1]: Starting udev Control Socket.
[    1.987142] systemd[1]: Listening on udev Control Socket.
[    1.987156] systemd[1]: Starting udev Kernel Socket.
[    1.987176] systemd[1]: Listening on udev Kernel Socket.
[    1.987191] systemd[1]: Starting Journal Socket.
[    1.987216] systemd[1]: Listening on Journal Socket.
[    1.987243] systemd[1]: Starting System Slice.
[    1.987273] systemd[1]: Created slice System Slice.
[    1.987290] systemd[1]: Started File System Check on Root Device.
[    1.987304] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    1.987340] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.987355] systemd[1]: Starting system-getty.slice.
[    1.987388] systemd[1]: Created slice system-getty.slice.
[    1.987409] systemd[1]: Starting Increase datagram queue length...
[    1.987714] systemd[1]: Mounting POSIX Message Queue File System...
[    1.988881] systemd[1]: Started Set Up Additional Binary Formats.
[    1.988955] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.989280] systemd[1]: Starting udev Coldplug all Devices...
[    1.989668] systemd[1]: Mounting Debug File System...
[    1.994230] systemd[1]: Starting Load Kernel Modules...
[    1.994590] systemd[1]: Mounting Huge Pages File System...
[    1.994882] systemd[1]: Starting Slices.
[    1.994902] systemd[1]: Reached target Slices.
[    1.995764] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.996069] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.001336] fuse init (API version 7.23)
[    2.002386] systemd[1]: Started Load Kernel Modules.
[    2.002529] systemd[1]: Mounting FUSE Control File System...
[    2.002898] systemd[1]: Starting Apply Kernel Variables...
[    2.003305] systemd[1]: Mounted Configuration File System.
[    2.005451] systemd[1]: Mounted Huge Pages File System.
[    2.005494] systemd[1]: Mounted Debug File System.
[    2.005529] systemd[1]: Mounted POSIX Message Queue File System.
[    2.005572] systemd[1]: Mounted FUSE Control File System.
[    2.006007] systemd[1]: Started Increase datagram queue length.
[    2.006750] systemd[1]: Started Apply Kernel Variables.
[    2.007524] systemd[1]: Starting Syslog Socket.
[    2.007574] systemd[1]: Listening on Syslog Socket.
[    2.007617] systemd[1]: Starting Journal Service...
[    2.007994] systemd[1]: Started Journal Service.
[    2.021894] systemd-udevd[202]: starting version 215
[    2.086267] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    2.086274] ACPI: Sleep Button [SLPB]
[    2.086330] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    2.086333] ACPI: Power Button [PWRB]
[    2.086398] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    2.087098] ACPI: Lid Switch [LID0]
[    2.087159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    2.087163] ACPI: Power Button [PWRF]
[    2.087522] Monitor-Mwait will be used to enter C-1 state
[    2.087554] Monitor-Mwait will be used to enter C-2 state
[    2.087578] Monitor-Mwait will be used to enter C-3 state
[    2.087615] ACPI: acpi_idle registered with cpuidle
[    2.098312] wmi: Mapper loaded
[    2.099054] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.102364] ACPI: AC Adapter [ADP1] (off-line)
[    2.102748] input: cmpc_keys as /devices/LNXSYSTM:00/LNXSYBUS:00/FNBT0000:00/input/input7
[    2.104771] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[    2.108043] EXT4-fs (sdb4): re-mounted. Opts: (null)
[    2.130061] EFI Variables Facility v0.08 2004-May-17
[    2.130710] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    2.138209] usb 1-7: New USB device found, idVendor=0bda, idProduct=0129
[    2.138212] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.138214] usb 1-7: Product: USB2.0-CRW
[    2.138216] usb 1-7: Manufacturer: Generic
[    2.138217] usb 1-7: SerialNumber: 20100201396000000
[    2.139741] [drm] Initialized drm 1.1.0 20060810
[    2.140366] pstore: Registered efi as persistent store backend
[    2.146633] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.146970] snd_hda_intel 0000:00:1f.3: irq 146 for MSI/MSI-X
[    2.161794] MXM: GUID detected in BIOS
[    2.161826] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    2.162024] ACPI Warning: \_SB_.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    2.162088] ACPI Warning: \_SB_.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    2.162304] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    2.162306] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP01.PEGP handle
[    2.162322] checking generic (b0000000 1d5000) vs hw (c0000000 10000000)
[    2.162323] checking generic (b0000000 1d5000) vs hw (d0000000 2000000)
[    2.162363] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[    2.162726] nouveau ![  DEVICE][0000:01:00.0] unknown Maxwell chipset
[    2.162749] nouveau E[  DEVICE][0000:01:00.0] unknown chipset, 0x1180d0a2
[    2.162771] nouveau E[     DRM] failed to create 0x80000080, -22
[    2.163016] nouveau: probe of 0000:01:00.0 failed with error -22
[    2.164931] Bluetooth: Core ver 2.19
[    2.164945] NET: Registered protocol family 31
[    2.164946] Bluetooth: HCI device and connection manager initialized
[    2.164951] Bluetooth: HCI socket layer initialized
[    2.164954] Bluetooth: L2CAP socket layer initialized
[    2.164961] Bluetooth: SCO socket layer initialized
[    2.168558] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.168561] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.168563] sound hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    2.168564] sound hdaudioC0D0:    mono: mono_out=0x0
[    2.168565] sound hdaudioC0D0:    inputs:
[    2.168567] sound hdaudioC0D0:      Mic=0x18
[    2.168568] sound hdaudioC0D0:      Internal Mic=0x12
[    2.171895] AVX2 version of gcm_enc/dec engaged.
[    2.179730] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    2.183376] media: Linux media interface: v0.10
[    2.186459] Linux video capture interface: v2.00
[    2.192861] uvcvideo: Found UVC 1.00 device Webcam HD (05c8:039c)
[    2.192981] alg: No test for crc32 (crc32-pclmul)
[    2.199512] input: Webcam HD as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9
[    2.200079] usbcore: registered new interface driver uvcvideo
[    2.200082] USB Video Class driver (1.1.1)
[    2.202386] usbcore: registered new interface driver btusb
[    2.206709] asus_wmi: Asus Management GUID not found
[    2.217727] Bluetooth: hci0: read Intel version: 370810011003110e00
[    2.218284] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[    2.218335] bluetooth hci0: Direct firmware load failed with error -2
[    2.218336] bluetooth hci0: Falling back to user helper
[    2.223498] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
[    2.223572] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.bseq (-2)
[    2.223609] bluetooth hci0: Direct firmware load failed with error -2
[    2.223610] bluetooth hci0: Falling back to user helper
[    2.224039] Bluetooth: hci0 failed to open default Intel fw file: intel/ibt-hw-37.8.bseq
[    2.238233] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    2.248057] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.256339] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[    2.259888] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    2.262254] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    2.310135] ACPI: Battery Slot [BAT1] (battery present)
[    2.459399] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.566388] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    2.641306] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.642647] Adding 24414204k swap on /dev/sda3.  Priority:-1 extents:1 across:24414204k FS
[    2.650396] systemd-journald[196]: Received request to flush runtime journal from PID 1
[    2.746631] Switched to clocksource tsc
[    2.765167] RPC: Registered named UNIX socket transport module.
[    2.765170] RPC: Registered udp transport module.
[    2.765172] RPC: Registered tcp transport module.
[    2.765173] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.767716] FS-Cache: Loaded
[    2.773421] FS-Cache: Netfs 'nfs' registered for caching
[    2.779738] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.952635] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.952639] Bluetooth: BNEP filters: protocol multicast
[    2.952645] Bluetooth: BNEP socket layer initialized
[    2.970692] cfg80211: Calling CRDA to update world regulatory domain
[    2.996894] cfg80211: World regulatory domain updated:
[    2.996896] cfg80211:  DFS Master region: unset
[    2.996897] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    2.996899] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.996900] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.996901] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    2.996902] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    2.996904] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    2.996905] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    2.996906] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    2.996907] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    3.028950] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[    3.068684] r8169 0000:04:00.0 eth0: link down
[    3.068741] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.192381] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/hdaudioC0D0/input10
[    3.194048] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    3.194174] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    3.194294] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    3.246586] usbcore: registered new interface driver rtsx_usb
[  146.089682] usb 1-2: new low-speed USB device number 5 using xhci_hcd
[  146.279078] usb 1-2: New USB device found, idVendor=0461, idProduct=4d0f
[  146.279091] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  146.279098] usb 1-2: Product: USB Optical Mouse
[  146.279104] usb 1-2: Manufacturer: PixArt
[  146.279678] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[  146.297079] hidraw: raw HID events driver (C) Jiri Kosina
[  146.300859] usbcore: registered new interface driver usbhid
[  146.300862] usbhid: USB HID core driver
[  146.306724] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0461:4D0F.0001/input/input14
[  146.306878] hid-generic 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[  341.070626] r8169 0000:04:00.0 eth0: link up
[  341.070634] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  341.792327] r8169 0000:04:00.0 eth0: link down
[  343.467772] r8169 0000:04:00.0 eth0: link up
 



Idem, c'est vraiment long là...ops.gif

ashardalon@Nomade:~$ cat /var/log/Xorg.0.log


[     3.038]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[     3.038] X Protocol Version 11, Revision 0
[     3.038] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     3.038] Current Operating System: Linux Nomade 3.16.0-4-amd64 #1 SMP Debian 3.16.36-1+deb8u2 (2016-10-19) x86_64
[     3.038] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=3dfdd143-a2a7-4617-b06f-312afd78c363 ro quiet
[     3.038] Build Date: 11 February 2015  12:32:02AM
[     3.038] xorg-server 2:1.16.4-1 ([url]http://www.debian.org/support[/url])
[     3.038] Current version of pixman: 0.32.6
[     3.038]  Before reporting problems, check [url]http://wiki.x.org[/url]
  to make sure that you have the latest version.
[     3.038] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.038] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 12 17:47:57 2017
[     3.041] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.041] (==) No Layout section.  Using the first Screen section.
[     3.041] (==) No screen section available. Using defaults.
[     3.041] (**) |-->Screen "Default Screen Section" (0)
[     3.041] (**) |   |-->Monitor "<default monitor>"
[     3.042] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     3.042] (==) Automatically adding devices
[     3.042] (==) Automatically enabling devices
[     3.042] (==) Automatically adding GPU devices
[     3.044] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.044]  Entry deleted from font path.
[     3.047] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     3.047] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.047] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.047] (II) Loader magic: 0x7f20f3e5ad80
[     3.047] (II) Module ABI versions:
[     3.047]  X.Org ANSI C Emulation: 0.4
[     3.047]  X.Org Video Driver: 18.0
[     3.047]  X.Org XInput driver : 21.0
[     3.047]  X.Org Server Extension : 8.0
[     3.048] (--) PCI:*(0:0:2:0) 8086:1916:1019:9833 rev 7, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[     3.048] (--) PCI: (0:1:0:0) 10de:134d:1019:9833 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     3.049] (II) LoadModule: "glx"
[     3.065] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.073] (II) Module glx: vendor="X.Org Foundation"
[     3.073]  compiled for 1.16.4, module version = 1.0.0
[     3.073]  ABI class: X.Org Server Extension, version 8.0
[     3.073] (==) AIGLX enabled
[     3.073] (==) Matched intel as autoconfigured driver 0
[     3.073] (==) Matched modesetting as autoconfigured driver 1
[     3.073] (==) Matched fbdev as autoconfigured driver 2
[     3.073] (==) Matched vesa as autoconfigured driver 3
[     3.073] (==) Assigned the driver to the xf86ConfigLayout
[     3.073] (II) LoadModule: "intel"
[     3.073] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     3.076] (II) Module intel: vendor="X.Org Foundation"
[     3.076]  compiled for 1.15.99.904, module version = 2.21.15
[     3.076]  Module class: X.Org Video Driver
[     3.076]  ABI class: X.Org Video Driver, version 18.0
[     3.076] (II) LoadModule: "modesetting"
[     3.076] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.077] (II) Module modesetting: vendor="X.Org Foundation"
[     3.077]  compiled for 1.16.4, module version = 0.9.0
[     3.077]  Module class: X.Org Video Driver
[     3.077]  ABI class: X.Org Video Driver, version 18.0
[     3.077] (II) LoadModule: "fbdev"
[     3.077] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.077] (II) Module fbdev: vendor="X.Org Foundation"
[     3.077]  compiled for 1.15.99.904, module version = 0.4.4
[     3.077]  Module class: X.Org Video Driver
[     3.077]  ABI class: X.Org Video Driver, version 18.0
[     3.077] (II) LoadModule: "vesa"
[     3.077] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.078] (II) Module vesa: vendor="X.Org Foundation"
[     3.078]  compiled for 1.15.99.904, module version = 2.3.3
[     3.078]  Module class: X.Org Video Driver
[     3.078]  ABI class: X.Org Video Driver, version 18.0
[     3.078] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[     3.079] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.079] (II) FBDEV: driver for framebuffer: fbdev
[     3.079] (II) VESA: driver for VESA chipsets: vesa
[     3.079] (++) using VT number 7

[     3.093] (EE) open /dev/dri/card0: No such file or directory
[     3.093] (WW) Falling back to old probe method for modesetting
[     3.093] (EE) open /dev/dri/card0: No such file or directory
[     3.093] (II) Loading sub module "fbdevhw"
[     3.093] (II) LoadModule: "fbdevhw"
[     3.094] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.094] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.094]  compiled for 1.16.4, module version = 0.0.2
[     3.094]  ABI class: X.Org Video Driver, version 18.0
[     3.094] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[     3.094] (II) FBDEV(1): using default device
[     3.094] (WW) Falling back to old probe method for vesa
[     3.094] (EE) Screen 0 deleted because of no matching config section.
[     3.094] (II) UnloadModule: "modesetting"
[     3.094] (II) FBDEV(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     3.094] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     3.094] (==) FBDEV(0): RGB weight 888
[     3.094] (==) FBDEV(0): Default visual is TrueColor
[     3.094] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.094] (II) FBDEV(0): hardware: simple (video memory: 1876kB)
[     3.094] (II) FBDEV(0): checking modes against framebuffer device...
[     3.094] (II) FBDEV(0): checking modes against monitor...
[     3.094] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)
[     3.094] (**) FBDEV(0):  Built-in mode "current"
[     3.094] (==) FBDEV(0): DPI set to (96, 96)
[     3.094] (II) Loading sub module "fb"
[     3.094] (II) LoadModule: "fb"
[     3.095] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.095] (II) Module fb: vendor="X.Org Foundation"
[     3.095]  compiled for 1.16.4, module version = 1.0.0
[     3.095]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.095] (**) FBDEV(0): using shadow framebuffer
[     3.095] (II) Loading sub module "shadow"
[     3.095] (II) LoadModule: "shadow"
[     3.096] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     3.096] (II) Module shadow: vendor="X.Org Foundation"
[     3.096]  compiled for 1.16.4, module version = 1.1.0
[     3.096]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.096] (II) UnloadModule: "vesa"
[     3.096] (II) Unloading vesa
[     3.096] (==) Depth 24 pixmap format is 32 bpp
[     3.096] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[     3.099] (==) FBDEV(0): Backing store enabled
[     3.099] (==) FBDEV(0): DPMS enabled
[     3.099] (==) RandR enabled
[     3.103] (II) SELinux: Disabled on system
[     3.104] (II) AIGLX: Screen 0 is not DRI2 capable
[     3.104] (EE) AIGLX: reverting to software rendering
[     3.184] (II) AIGLX: Loaded and initialized swrast
[     3.184] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     3.240] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     3.240] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     3.240] (II) LoadModule: "evdev"
[     3.240] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     3.242] (II) Module evdev: vendor="X.Org Foundation"
[     3.242]  compiled for 1.16.0, module version = 2.9.0
[     3.242]  Module class: X.Org XInput Driver
[     3.242]  ABI class: X.Org XInput driver, version 21.0
[     3.242] (II) Using input driver 'evdev' for 'Power Button'
[     3.242] (**) Power Button: always reports core events
[     3.242] (**) evdev: Power Button: Device: "/dev/input/event5"
[     3.242] (--) evdev: Power Button: Vendor 0 Product 0x1
[     3.242] (--) evdev: Power Button: Found keys
[     3.242] (II) evdev: Power Button: Configuring as keyboard
[     3.242] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[     3.242] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     3.242] (**) Option "xkb_rules" "evdev"
[     3.242] (**) Option "xkb_model" "pc105"
[     3.242] (**) Option "xkb_layout" "be"
[     3.254] (II) config/udev: Adding input device cmpc_keys (/dev/input/event6)
[     3.254] (**) cmpc_keys: Applying InputClass "evdev keyboard catchall"
[     3.254] (II) Using input driver 'evdev' for 'cmpc_keys'
[     3.254] (**) cmpc_keys: always reports core events
[     3.254] (**) evdev: cmpc_keys: Device: "/dev/input/event6"
[     3.254] (--) evdev: cmpc_keys: Vendor 0 Product 0
[     3.254] (--) evdev: cmpc_keys: Found keys
[     3.254] (II) evdev: cmpc_keys: Configuring as keyboard
[     3.254] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/FNBT0000:00/input/input7/event6"
[     3.254] (II) XINPUT: Adding extended input device "cmpc_keys" (type: KEYBOARD, id 7)
[     3.254] (**) Option "xkb_rules" "evdev"
[     3.254] (**) Option "xkb_model" "pc105"
[     3.255] (**) Option "xkb_layout" "be"
[     3.255] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     3.255] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     3.255] (II) Using input driver 'evdev' for 'Power Button'
[     3.255] (**) Power Button: always reports core events
[     3.255] (**) evdev: Power Button: Device: "/dev/input/event3"
[     3.255] (--) evdev: Power Button: Vendor 0 Product 0x1
[     3.255] (--) evdev: Power Button: Found keys
[     3.255] (II) evdev: Power Button: Configuring as keyboard
[     3.255] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[     3.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     3.255] (**) Option "xkb_rules" "evdev"
[     3.255] (**) Option "xkb_model" "pc105"
[     3.255] (**) Option "xkb_layout" "be"
[     3.255] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[     3.255] (II) No input driver specified, ignoring this device.
[     3.255] (II) This device may have been added with another device file.
[     3.256] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     3.256] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     3.256] (II) Using input driver 'evdev' for 'Sleep Button'
[     3.256] (**) Sleep Button: always reports core events
[     3.256] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[     3.256] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     3.256] (--) evdev: Sleep Button: Found keys
[     3.256] (II) evdev: Sleep Button: Configuring as keyboard
[     3.256] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[     3.256] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     3.256] (**) Option "xkb_rules" "evdev"
[     3.256] (**) Option "xkb_model" "pc105"
[     3.256] (**) Option "xkb_layout" "be"
[     3.257] (II) config/udev: Adding input device Webcam HD (/dev/input/event8)
[     3.257] (**) Webcam HD: Applying InputClass "evdev keyboard catchall"
[     3.257] (II) Using input driver 'evdev' for 'Webcam HD'
[     3.257] (**) Webcam HD: always reports core events
[     3.257] (**) evdev: Webcam HD: Device: "/dev/input/event8"
[     3.257] (--) evdev: Webcam HD: Vendor 0x5c8 Product 0x39c
[     3.257] (--) evdev: Webcam HD: Found keys
[     3.257] (II) evdev: Webcam HD: Configuring as keyboard
[     3.257] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input9/event8"
[     3.257] (II) XINPUT: Adding extended input device "Webcam HD" (type: KEYBOARD, id 10)
[     3.257] (**) Option "xkb_rules" "evdev"
[     3.257] (**) Option "xkb_model" "pc105"
[     3.257] (**) Option "xkb_layout" "be"
[     3.258] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[     3.258] (II) No input driver specified, ignoring this device.
[     3.258] (II) This device may have been added with another device file.
[     3.259] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[     3.259] (II) No input driver specified, ignoring this device.
[     3.259] (II) This device may have been added with another device file.
[     3.259] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[     3.259] (II) No input driver specified, ignoring this device.
[     3.259] (II) This device may have been added with another device file.
[     3.260] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[     3.260] (II) No input driver specified, ignoring this device.
[     3.260] (II) This device may have been added with another device file.
[     3.260] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     3.260] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     3.260] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     3.260] (**) AT Translated Set 2 keyboard: always reports core events
[     3.260] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     3.260] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     3.260] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     3.260] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     3.260] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     3.260] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     3.260] (**) Option "xkb_rules" "evdev"
[     3.260] (**) Option "xkb_model" "pc105"
[     3.260] (**) Option "xkb_layout" "be"
[     3.261] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[     3.262] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     3.262] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     3.262] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     3.262] (II) LoadModule: "synaptics"
[     3.262] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     3.263] (II) Module synaptics: vendor="X.Org Foundation"
[     3.263]  compiled for 1.16.0.901, module version = 1.8.99
[     3.263]  Module class: X.Org XInput Driver
[     3.263]  ABI class: X.Org XInput driver, version 21.0
[     3.263] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     3.263] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     3.263] (**) Option "Device" "/dev/input/event1"
[     3.296] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[     3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1344 - 5662 (res 42)
[     3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1298 - 4634 (res 53)
[     3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[     3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     3.296] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     3.296] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     3.296] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     3.348] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[     3.348] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[     3.348] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     3.348] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     3.348] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[     3.349] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     3.349] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     3.349] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     3.349] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     3.349] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     3.349] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     3.349] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     3.350] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     3.350] (II) No input driver specified, ignoring this device.
[     3.350] (II) This device may have been added with another device file.
[     3.355] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[     3.356] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[     3.356] (II) No input driver specified, ignoring this device.
[     3.356] (II) This device may have been added with another device file.
[     3.357] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[     3.357] (II) No input driver specified, ignoring this device.
[     3.357] (II) This device may have been added with another device file.
[     3.357] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[     3.357] (II) No input driver specified, ignoring this device.
[     3.357] (II) This device may have been added with another device file.
[     3.358] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[     3.358] (II) No input driver specified, ignoring this device.
[     3.358] (II) This device may have been added with another device file.
[     5.461] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[   111.062] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[   146.209] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[   146.209] (II) No input driver specified, ignoring this device.
[   146.209] (II) This device may have been added with another device file.
[   146.210] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event13)
[   146.210] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   146.210] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[   146.210] (**) PixArt USB Optical Mouse: always reports core events
[   146.210] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event13"
[   146.210] (--) evdev: PixArt USB Optical Mouse: Vendor 0x461 Product 0x4d0f
[   146.210] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[   146.210] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[   146.210] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[   146.210] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[   146.210] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[   146.210] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[   146.210] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   146.210] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   146.210] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0461:4D0F.0001/input/input14/event13"
[   146.210] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 13)
[   146.210] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[   146.210] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[   146.210] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[   146.210] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[   146.210] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[  2196.426] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2200.222] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2284.191] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2680.272] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2734.529] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2826.799] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2860.151] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2868.799] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2890.725] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2929.096] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2967.781] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2985.689] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  2990.394] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3006.902] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3035.093] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3051.817] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3083.884] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3104.836] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3115.964] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3134.918] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3175.421] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3180.876] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3186.134] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3211.792] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3310.455] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3356.435] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3368.262] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3378.757] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3383.368] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3390.772] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3602.771] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3612.583] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3617.327] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3667.377] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3690.219] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3713.860] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3732.020] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  3793.972] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  4209.718] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  4218.198] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  4245.223] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[  4286.396] (EE) FBDEV(0): FBIOBLANK: Invalid argument
 

Hors ligne

#4 12-02-2017 19:30:09

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : résolution d'écran, blabla, Résolu !

Bonjour smile
J'ai édité ton message pour mettre les balises codes correctes
Voir le tuto : Le code, ça pique moins les yeux en couleur
La batterie va lâcher, je peux pas t'en dire plus mais tout est dans le tutoriel wink

Hors ligne

#5 12-02-2017 19:30:48

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

Re-,

Merci @chalu pour les balises... mais impossible de trouver les références exactes et précises (marque et modèle) du portable au milieu de tout ça tongue

Hors ligne

#6 12-02-2017 19:33:21

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : résolution d'écran, blabla, Résolu !

J'ai fait un truc de travers en corrigeant et supprimé une info ? Dsl là je suis à 4% donc ça va couper ...

Hors ligne

#7 12-02-2017 19:38:48

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

Non non je ne crois pas, c'était juste un message subliminal destiné à Ashardalon wink

Hors ligne

#8 12-02-2017 20:01:34

Ashardalon
Membre
Distrib. : Debian stretch
Noyau : Linux 4.9.0-2-amd64
(G)UI : xfce
Inscription : 14-01-2017

Re : résolution d'écran, blabla, Résolu !

Merci à chalu pour les balises, j'irai regarder leur code source pour m'en inspirer plus tard.

Pour la marque, facile c'est PEAQ, pour le modèle par contre tu me poses une colle, par contre tous les autocollants à l'achat sont toujours dessus, mais je ne sais pas quelle info sur ces derniers est la bonne. et la piste BIOS ?

Et moi qui pensais que le rapport terminal que je vous ai fourni comprenait toutes les infos nécessaires...

Edit: sur les autocollants j'ai trouvé "model PNB P2015", en espérant que ça ne soit pas le modèle d'alimentation...

Dernière modification par Ashardalon (12-02-2017 20:04:07)

Hors ligne

#9 12-02-2017 20:12:48

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

Re-,

Disons qu'il n'est pas inintéressant de visualiser le machin voire même de consulter la doc... Analyse en cours ; cela ne va pas être une sinécure, la carte NVIDIA n'est semble-t-il pas reconnue du tout, etc. En pratique tu as le choix entre :

  • soit installer un noyau beaucoup plus récent que le 3.16 (ce sera donc le 4.9) ;

  • soit installer Debian Stretch (anonyme te conseillerait sans doute cette option).


Merci pour les références du portable, peut-être incomplètes, mais oui, il s'agit bien du modèle smile

edit: vu, il s'agit du PEAQ PNB P2015 - I5B1, au temps pour moi, c'est plus lisible en chasse fixe.

Dernière modification par èfpé (19-03-2017 08:16:24)

Hors ligne

#10 12-02-2017 20:46:21

Ashardalon
Membre
Distrib. : Debian stretch
Noyau : Linux 4.9.0-2-amd64
(G)UI : xfce
Inscription : 14-01-2017

Re : résolution d'écran, blabla, Résolu !

je confirme sur l'image ça y ressemble très très fort.

heu sinon c'est quoi stretch ?

Heu, mettre à jour un noyau ? c'est possible sans faire une réinstallation propre et complète ça ?

Dernière modification par Ashardalon (12-02-2017 20:48:45)

Hors ligne

#11 12-02-2017 20:56:48

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

Re-,

Alors Stretch est le petit nom de la future Debian 9, qui devrait sortir d'ici quelques mois, actuellement en RC2 je crois.
Sinon oui, il est possible de mettre le noyau à niveau sans réinstaller, mais ça se prépare ; attends aussi d'autres avis.

Dernière modification par èfpé (12-02-2017 21:08:48)

Hors ligne

#12 12-02-2017 23:09:19

anonyme
Invité

Re : résolution d'écran, blabla, Résolu !

Bonsoir
on dirait qu il y a 2 systèmes graphiques :


[     3.048] (--) PCI:*(0:0:2:0) 8086:1916:1019:9833 rev 7, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[     3.048] (--) PCI: (0:1:0:0) 10de:134d:1019:9833 rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
 



le système cherche a installer le driver intel


[     3.073] (==) Matched intel as autoconfigured driver 0
[     3.073] (==) Matched modesetting as autoconfigured driver 1
[     3.073] (==) Matched fbdev as autoconfigured driver 2
[     3.073] (==) Matched vesa as autoconfigured driver 3
[     3.073] (==) Assigned the driver to the xf86ConfigLayout
[     3.073] (II) LoadModule: "intel"
 



commence par modifier ton sources.list (/etc/apt/sources.list )


deb http://ftp.fr.debian.org/debian/ jessie main contrib non-free

deb http://security.debian.org/ jessie/updates main contrib non-free

# jessie-updates, previously known as 'volatile'
deb http://ftp.fr.debian.org/debian/ jessie-updates main contrib non-free

deb http://ftp.fr.debian.org/debian/ jessie-backports main contrib non-free
 



puis tu fais :


apt-get update
 



apt-get upgrade
 


installation du noyau 4.9


apt-get install -t jessie-backports linux-image-amd64 linux-headers-amd64
 


un reboot de la machine

installation du firmware non free intel


apt-get install firmware-misc-nonfree
 



ça devrait allez mieux pour ceci :


00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:1916] (rev 07)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
 



pour ceci (graphique 3D avec bumblebee ) je passe l:rolleyes:


01:00.0 3D controller [0302]: NVIDIA Corporation Device [10de:134d] (rev a2)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
 



pour ceci


03:00.0 Network controller [0280]: Intel Corporation Device [8086:3165] (rev 81)
  Subsystem: Intel Corporation Device [8086:4010]
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
  Subsystem: Elitegroup Computer Systems Device [1019:9833]
  Kernel driver in use: r8169
 



installer le firmware realtek


apt-get install firmware-realtek
 



pour le wifi intel


apt-get install firmware-iwlwifi
 



reboot de la machine

Dernière modification par anonyme (12-02-2017 23:33:19)

#13 12-02-2017 23:26:48

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

Bonsoir,

Oui : Intel HD Graphics 520 + GeForce 940MX ; selon Cathy le contrôleur Intel est pris en charge par le pilote i915 à partir de la version 3.19 du noyau, et pour le contrôleur NVIDIA ce sera bumblebee ± nvidia sinon rien c'est ça ?

@anonyme : une petite erreur s'est glissée dans ta commande d'install ; par ailleurs j'ai noté qu'il manque un firmware pour le Bluetooth (installation du paquet firmware-iwlwifi rétroporté aussi donc).

Dernière modification par èfpé (13-02-2017 14:26:48)

Hors ligne

#14 12-02-2017 23:33:59

anonyme
Invité

Re : résolution d'écran, blabla, Résolu !

@èfpé
C'est correct maintenant ? (il manquait le -t ? )
@Ashardalon
deuxième solution installer stretch puis les firmwares nonfree  smile
il reste le problème de bumblebee mais déja le bureau sera correct
tu a installé quel bureau ?

Dernière modification par anonyme (12-02-2017 23:38:56)

#15 13-02-2017 15:26:48

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

Bonjour,

@anonyme : oui c'est ça, il manquait le 't' de '-t' (précision pour Ashardalon, c'est la forme courte de l'option '--target-release').

@Ashardalon : ta configuration de clavier est effectivement un peu bizarre (aucune variante, d'accord, mais pourquoi deux dispositions 'us' ?) ; tu peux, soit modifier manuellement le fichier /etc/default/keyboard et ajouter la variante qui te convient, soit reconfigurer semi-graphiquement le paquet keyboard-configuration (s'il est installé) via la commande dpkg-reconfigure :

nano /etc/default/keyboard

ou

dpkg-reconfigure keyboard-configuration


Tu peux éventuellement modifier le modèle du clavier, si 'pc105' n'est pas optimal ; les modèles, dispositions, variantes et options sont décrits dans la page de manuel xkeyboard-config (extrait) :

man xkeyboard-config

be                      Belgian    
be(oss)                 Belgian (alternative)    
be(oss_latin9)          Belgian (alternative, Latin-9 only)    
be(oss_sundeadkeys)     Belgian (alternative, Sun dead keys)   
be(iso-alternate)       Belgian (ISO alternate)    
be(nodeadkeys)          Belgian (eliminate dead keys)    
be(sundeadkeys)         Belgian (Sun dead keys)    
be(wang)                Belgian (Wang model 724 azerty)


Ceci dit, il est certainement pragmatique de commencer par la mise à niveau du système et voir ce qu'il en est smile

Dernière modification par èfpé (15-02-2017 07:48:26)

Hors ligne

#16 13-02-2017 20:01:56

anonyme
Invité

Re : résolution d'écran, blabla, Résolu !

@èfpé

j'ai mit les versions de jessie pour les différents firmwares dans mes commandes en #12  , il faut peut etre les versions des backports 
normalement KMS du noyau (4.9 ) avec intel n a plus besoin du paquet xserver-xorg-video-intel (ni du paquet xserver-xorg-video-modesetting qui n'existe plus a partir de stretch )
par contre pour DRI2 et GLX peut etre mettre a jour mesa version backports

Dernière modification par anonyme (13-02-2017 20:04:55)

#17 14-02-2017 20:02:42

èfpé
Membre
Inscription : 10-07-2016

Re : résolution d'écran, blabla, Résolu !

@anonyme,

Alors... concernant les firmwares non libres, je dirais même plus : non seulement tous les installer ou 'upgrader' en version rétroportée (d'ailleurs pour firmware-misc-nonfree la question ne se pose pas) mais aussi le faire en même temps que le noyau, car j'ai comme une vague souvenance (litote roll) d'un fil un peu compliqué, en novembre dernier (cf. topic #15823).

Pour ce qui est de DRI2 et GLX, oui, il me semble effectivement que certains petits soucis d'accélération matérielle ont été résolus en 'upgradant' les paquets libgl1-mesa-dri et libgl1-mesa-glx (cf. topic #15969).

Enfin la mise à niveau des paquets d'en-têtes du noyau n'est-elle pas superflue si ces derniers ne sont pas déjà installés ?

Donc finalement, on pourrait proposer une simple commande :

apt-get -t jessie-backports install firmware-iwlwifi firmware-misc-nonfree firmware-realtek libegl1-mesa libgl1-mesa-dri libgl1-mesa-glx linux-headers-amd64 linux-image-amd64


Volontiers précédée d'une simulation avec l'option '-s' (forme courte de l'option '--simulate') :

apt-get -s -t jessie-backports install firmware-iwlwifi firmware-misc-nonfree firmware-realtek libegl1-mesa libgl1-mesa-dri libgl1-mesa-glx linux-headers-amd64 linux-image-amd64


En cas de perte de l'écran X au redémarrage de la machine (cas observé avec un IGP Intel HD Graphics 510) :

apt-get -t jessie-backports install xserver-xorg-video-intel


Détails concernant les exigences matérielles (noyau et firmwares) :

Intel HD Graphics 520 → linux-image-amd64 3.19+
Intel Dual Band Wireless-AC 3165 → linux-image-amd64 3.17+

intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq → firmware-iwlwifi (20161130-2~bpo8+1)
intel/ibt-hw-37.8.bseq → firmware-iwlwifi (0.43)
iwlwifi-7265D-21.ucode → firmware-iwlwifi (20161130-2~bpo8+1)
i915/skl_dmc_ver1.bin → firmware-misc-nonfree (20161130-2~bpo8+1)
rtl_nic/rtl8168g-2.fw → firmware-realtek (0.43)
rtl_nic/rtl8168h-2.fw → firmware-realtek (20161130-2~bpo8+1)


Sources : cateee.net (ici et ) ; packages.debian.org (ici, ici et )

Dernière modification par èfpé (17-02-2017 18:02:42)

Hors ligne

#18 18-03-2017 11:03:47

Ashardalon
Membre
Distrib. : Debian stretch
Noyau : Linux 4.9.0-2-amd64
(G)UI : xfce
Inscription : 14-01-2017

Re : résolution d'écran, blabla, Résolu !

Bonjour à tous ! Suite à de très gros soucis avec mon FAI, c'est très difficile pour moi de me connecter à internet ces derniers temps vu que je ne peux pas me connecter chez moi. Je vous demanderai donc d'être indulgents avec mes temps de réponse qui peuvent donc se mesurer en semaines jusqu'à ce que ces fichus travaux soient terminés ! Bon, revenons au sujet....
...
...
...
Wow, j'ai l'impression d'être de retour sur les bancs de l'école tellement vos réponses relèvent de la technique obscure pour moi lol
Dans le tas j'ai compris qu'il valait mieux installer proprement une version plus récente de l'OS. par contre j'ai pas vraiment compris la méthodologie pour installer des drivers non présents dans l'ISO PENDANT l'INSTALLATION ? scratchhead.gif

Ok, pendant ce temps, je cherche une version complète de Debian strech, n'ayant pas accès à internet facilement, ça me permettra d'avancer hors ligne, cependant si vous avez un lien vers son téléchargement officiel, ça ira plus vite, merci d'avance ! wink

copier coller la conversation sur un fichier texte, c'est pas mal non plus tiens... ^^

Ah en relisant je me rend compte que je ne comprends pas ce que signifie pour vous le mot "rétroporté" je suppose qu'il y a une différence de sens avec le mot anglais downgrade, donc voilà.ops.gif

Edit: Ok vu que la version strech est une version de test, je vais télécharger et installer la version 8.7 de Debian de Jessie vu qu'apparemment c'est la version offcielle actuelle.
Je demande donc une suspension temporaire du topic pour le moment vu qu'on va s'attaquer à une installation en bonne et due forme et qu'il y a une section rien que pour ça ! lien du sujet d'installation à venir ici: https://debian-facile.org/viewtopic.php … 30#p218030

Dernière modification par Ashardalon (18-03-2017 12:00:15)

Hors ligne

Pied de page des forums