Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 21-03-2017 09:50:16

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Bumblebee sans Nvidia ni Nouveau

Bonjour,

J'ai acheté un HP Omen core i5 gtx 950, pensant qu'il était plutôt compatible linux car j'avais trouvé les mêmes caractéristiques chez un fournisseur de portables compatibles Linux, chipset h170 ou z170 je ne sais plus. Donc avec Nvidia Optimus

Il y a quatre jours que je parcours tous les forums en long et en large !
J'ai fait un double boot Win10 et Debian, après avoir bien galéré à cause de l'EFI et donc grub-efi
J'ai mis du temps à comprendre que je devais utiliser Bumblebee à cause d'Optimus
J'ai suivi à la lettre votre tuto Nvidia bumblebee et je me trouve dans une situation louche !

Mon portable affiche le graphique, mais ni Nvidia, ni Nouveau sont chargés ? Est ce-que bumblebee fait le minimum ?

Je peux charger à la main Nvidia : modprob -a nvidia fonctionne est charge le module sans aucun commentaire.

suite à ça quand je fais : service bumblebee restart, pas de commentaire non plus, mais le module nvidia est déchargée ?

glxgear fonctionne
optirun glxgear dit : ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.

Comment puis-je procéder pour avancer ? Que vérifier ?

Bonne journée

Hors ligne

#2 21-03-2017 20:14:04

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Quelques informations supplémentaires :

lspci :

00:02.0 VGA compatible controller: Intel Corporation Device 191b (rev 06)
01:00.0 3D controller: NVIDIA Corporation Device 139a (rev ff)

uname -a :

Linux LapTop 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07) x86_64 GNU/Linux

/etc/bumblebee/xorg.conf.nvidia

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

Bonne soirée

Hors ligne

#3 22-03-2017 00:04:04

èfpé
Membre
Inscription : 10-07-2016

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir et bienvenue flgftl,

Outre le fait que les caractéristiques données sont compatibles avec une dizaine de modèles de la série HP OMEN 15-ax000, il est possible que tu aies brûlé des étapes... correctement reconnus et pilotés, ces contrôleurs graphiques devraient produire le retour suivant (note que l'option -k de lspci est toujours intéressante) :

lspci | egrep 'VGA|3D'

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev ff)


Le contrôleur Intel HD Graphics 530 est, semble-t-il, pris en charge par le noyau à partir de la version 3.19 et requiert un firmware fourni par le paquet firmware-misc-nonfree. L'affichage se fait-il malgré tout à la résolution définition nominale de l'écran, à savoir 1920x1080 ?

xrandr --query


Le contrôleur GTX 950M est en principe supporté par nouveau... pour quelle raison as-tu installé le pilote propriétaire ? Quelques messages d'erreur sont explicités dans différents wikis (cf. ici, ici, ou ) mais une recherche sur le message d'erreur exact et complet sera également utile, de même que l'examen du fichier journal du serveur X :

cat /var/log/Xorg.0.log


Si tu postes des résultats, n'hésite surtout pas à employer les balises adaptées, merci smile

Dernière modification par èfpé (22-03-2017 00:14:14)

Hors ligne

#4 22-03-2017 15:34:27

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonjour et merci pour ta réponse,

lspci | egrep 'VGA|3D'

même avec l'option -k ne donne pas plus d'information pour la carte nvidia ! Peut-être que le problème se situe déjà là ?

00:00.0 Host bridge: Intel Corporation Device 1910 (rev 07)
  Subsystem: Hewlett-Packard Company Device 8257
00:01.0 PCI bridge: Intel Corporation Device 1901 (rev 07)
  Kernel driver in use: pcieport
00:02.0 VGA compatible controller: Intel Corporation Device 191b (rev 06)
  Subsystem: Hewlett-Packard Company Device 8257
00:04.0 Signal processing controller: Intel Corporation Device 1903 (rev 07)
  Subsystem: Hewlett-Packard Company Device 8257
00:14.0 USB controller: Intel Corporation Device a12f (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
  Kernel driver in use: xhci_hcd
00:14.2 Signal processing controller: Intel Corporation Device a131 (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
00:16.0 Communication controller: Intel Corporation Device a13a (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
00:17.0 SATA controller: Intel Corporation Device a103 (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
  Kernel driver in use: ahci
00:1c.0 PCI bridge: Intel Corporation Device a114 (rev f1)
  Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation Device a115 (rev f1)
  Kernel driver in use: pcieport
00:1c.6 PCI bridge: Intel Corporation Device a116 (rev f1)
  Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation Device a118 (rev f1)
  Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Device a14e (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
00:1f.2 Memory controller: Intel Corporation Device a121 (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
00:1f.3 Audio device: Intel Corporation Device a170 (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
  Kernel driver in use: snd_hda_intel
00:1f.4 SMBus: Intel Corporation Device a123 (rev 31)
  Subsystem: Hewlett-Packard Company Device 8257
01:00.0 3D controller: NVIDIA Corporation Device 139a (rev ff)
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 522a (rev 01)
  Subsystem: Hewlett-Packard Company Device 8257
08:00.0 Network controller: Intel Corporation Wireless 7265 (rev 61)
  Subsystem: Intel Corporation Dual Band Wireless-AC 7265
  Kernel driver in use: iwlwifi
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
  Subsystem: Hewlett-Packard Company Device 8257
  Kernel driver in use: r8169
0a:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a802 (rev 01)
  Subsystem: Samsung Electronics Co Ltd Device a801
  Kernel driver in use: nvme
 



concernant

xrandr --query


j'obtiens :

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected primary 1920x1080+0+0 0mm x 0mm
   1920x1080     77.00*


Donc c'est la bonne résolution !
Enfin

cat /var/log/Xorg.0.log


donne :

[     3.613]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[     3.613] X Protocol Version 11, Revision 0
[     3.613] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     3.613] Current Operating System: Linux Fab-LapTop 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07) x86_64
[     3.613] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=77d00371-1783-4e9b-bde3-aedb2de51d83 ro quiet
[     3.613] Build Date: 11 February 2015  12:32:02AM
[     3.613] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[     3.613] Current version of pixman: 0.32.6
[     3.613]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     3.613] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.613] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 22 14:15:17 2017
[     3.614] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.615] (==) No Layout section.  Using the first Screen section.
[     3.615] (==) No screen section available. Using defaults.
[     3.615] (**) |-->Screen "Default Screen Section" (0)
[     3.615] (**) |   |-->Monitor "<default monitor>"
[     3.618] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[     3.618] (==) Automatically adding devices
[     3.618] (==) Automatically enabling devices
[     3.618] (==) Automatically adding GPU devices
[     3.619] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.619]  Entry deleted from font path.
[     3.620] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     3.620] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.620] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.620] (II) Loader magic: 0x7f5c17bf1d80
[     3.620] (II) Module ABI versions:
[     3.620]  X.Org ANSI C Emulation: 0.4
[     3.620]  X.Org Video Driver: 18.0
[     3.620]  X.Org XInput driver : 21.0
[     3.620]  X.Org Server Extension : 8.0
[     3.621] (--) PCI:*(0:0:2:0) 8086:191b:103c:8257 rev 6, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00006000/64
[     3.621] (II) LoadModule: "glx"
[     3.622] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.628] (II) Module glx: vendor="X.Org Foundation"
[     3.628]  compiled for 1.16.4, module version = 1.0.0
[     3.628]  ABI class: X.Org Server Extension, version 8.0
[     3.628] (==) AIGLX enabled
[     3.628] (==) Matched intel as autoconfigured driver 0
[     3.628] (==) Matched modesetting as autoconfigured driver 1
[     3.628] (==) Matched fbdev as autoconfigured driver 2
[     3.628] (==) Matched vesa as autoconfigured driver 3
[     3.628] (==) Assigned the driver to the xf86ConfigLayout
[     3.628] (II) LoadModule: "intel"
[     3.628] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     3.630] (II) Module intel: vendor="X.Org Foundation"
[     3.630]  compiled for 1.16.4, module version = 2.99.917
[     3.630]  Module class: X.Org Video Driver
[     3.630]  ABI class: X.Org Video Driver, version 18.0
[     3.630] (II) LoadModule: "modesetting"
[     3.630] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     3.631] (II) Module modesetting: vendor="X.Org Foundation"
[     3.631]  compiled for 1.16.4, module version = 0.9.0
[     3.631]  Module class: X.Org Video Driver
[     3.631]  ABI class: X.Org Video Driver, version 18.0
[     3.631] (II) LoadModule: "fbdev"
[     3.631] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     3.631] (II) Module fbdev: vendor="X.Org Foundation"
[     3.631]  compiled for 1.15.99.904, module version = 0.4.4
[     3.631]  Module class: X.Org Video Driver
[     3.631]  ABI class: X.Org Video Driver, version 18.0
[     3.631] (II) LoadModule: "vesa"
[     3.632] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     3.632] (II) Module vesa: vendor="X.Org Foundation"
[     3.632]  compiled for 1.15.99.904, module version = 2.3.3
[     3.632]  Module class: X.Org Video Driver
[     3.632]  ABI class: X.Org Video Driver, version 18.0
[     3.632] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     3.632] (II) intel: Driver for Intel(R) HD Graphics
[     3.632] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     3.632] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     3.632] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     3.632] (II) FBDEV: driver for framebuffer: fbdev
[     3.632] (II) VESA: driver for VESA chipsets: vesa
[     3.632] (++) using VT number 7

[     3.656] (EE) open /dev/dri/card0: No such file or directory
[     3.656] (WW) Falling back to old probe method for modesetting
[     3.656] (EE) open /dev/dri/card0: No such file or directory
[     3.656] (II) Loading sub module "fbdevhw"
[     3.656] (II) LoadModule: "fbdevhw"
[     3.656] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     3.657] (II) Module fbdevhw: vendor="X.Org Foundation"
[     3.657]  compiled for 1.16.4, module version = 0.0.2
[     3.657]  ABI class: X.Org Video Driver, version 18.0
[     3.657] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[     3.657] (II) FBDEV(1): using default device
[     3.657] (WW) Falling back to old probe method for vesa
[     3.657] (EE) Screen 0 deleted because of no matching config section.
[     3.657] (II) UnloadModule: "modesetting"
[     3.657] (II) FBDEV(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[     3.657] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     3.657] (==) FBDEV(0): RGB weight 888
[     3.657] (==) FBDEV(0): Default visual is TrueColor
[     3.657] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.657] (II) FBDEV(0): hardware: EFI VGA (video memory: 8128kB)
[     3.657] (II) FBDEV(0): checking modes against framebuffer device...
[     3.657] (II) FBDEV(0): checking modes against monitor...
[     3.657] (--) FBDEV(0): Virtual size is 1920x1080 (pitch 1920)
[     3.657] (**) FBDEV(0):  Built-in mode "current": 207.4 MHz, 85.3 kHz, 77.2 Hz
[     3.657] (II) FBDEV(0): Modeline "current"x0.0  207.38  1920 1952 2192 2432  1080 1084 1088 1104 -hsync -vsync -csync (85.3 kHz b)
[     3.657] (==) FBDEV(0): DPI set to (96, 96)
[     3.657] (II) Loading sub module "fb"
[     3.657] (II) LoadModule: "fb"
[     3.657] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.658] (II) Module fb: vendor="X.Org Foundation"
[     3.658]  compiled for 1.16.4, module version = 1.0.0
[     3.658]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.658] (**) FBDEV(0): using shadow framebuffer
[     3.658] (II) Loading sub module "shadow"
[     3.658] (II) LoadModule: "shadow"
[     3.658] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     3.658] (II) Module shadow: vendor="X.Org Foundation"
[     3.658]  compiled for 1.16.4, module version = 1.1.0
[     3.658]  ABI class: X.Org ANSI C Emulation, version 0.4
[     3.658] (II) UnloadModule: "vesa"
[     3.658] (II) Unloading vesa
[     3.658] (==) Depth 24 pixmap format is 32 bpp
[     3.659] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[     3.660] (==) FBDEV(0): Backing store enabled
[     3.661] (==) FBDEV(0): DPMS enabled
[     3.661] (==) RandR enabled
[     3.666] (II) SELinux: Disabled on system
[     3.666] (II) AIGLX: Screen 0 is not DRI2 capable
[     3.666] (EE) AIGLX: reverting to software rendering
[     3.740] (II) AIGLX: Loaded and initialized swrast
[     3.740] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     3.777] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[     3.777] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     3.777] (II) LoadModule: "evdev"
[     3.777] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     3.778] (II) Module evdev: vendor="X.Org Foundation"
[     3.778]  compiled for 1.16.0, module version = 2.9.0
[     3.778]  Module class: X.Org XInput Driver
[     3.778]  ABI class: X.Org XInput driver, version 21.0
[     3.778] (II) Using input driver 'evdev' for 'Power Button'
[     3.778] (**) Power Button: always reports core events
[     3.778] (**) evdev: Power Button: Device: "/dev/input/event6"
[     3.778] (--) evdev: Power Button: Vendor 0 Product 0x1
[     3.778] (--) evdev: Power Button: Found keys
[     3.778] (II) evdev: Power Button: Configuring as keyboard
[     3.778] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[     3.778] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     3.778] (**) Option "xkb_rules" "evdev"
[     3.779] (**) Option "xkb_model" "pc105"
[     3.779] (**) Option "xkb_layout" "fr"
[     3.779] (**) Option "xkb_variant" "latin9"
[     3.791] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     3.791] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     3.791] (II) Using input driver 'evdev' for 'Power Button'
[     3.791] (**) Power Button: always reports core events
[     3.791] (**) evdev: Power Button: Device: "/dev/input/event5"
[     3.791] (--) evdev: Power Button: Vendor 0 Product 0x1
[     3.791] (--) evdev: Power Button: Found keys
[     3.791] (II) evdev: Power Button: Configuring as keyboard
[     3.791] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event5"
[     3.791] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     3.791] (**) Option "xkb_rules" "evdev"
[     3.791] (**) Option "xkb_model" "pc105"
[     3.791] (**) Option "xkb_layout" "fr"
[     3.791] (**) Option "xkb_variant" "latin9"
[     3.791] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[     3.791] (II) No input driver specified, ignoring this device.
[     3.791] (II) This device may have been added with another device file.
[     3.792] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:402d (/dev/input/event1)
[     3.792] (**) Logitech Unifying Device. Wireless PID:402d: Applying InputClass "evdev pointer catchall"
[     3.792] (**) Logitech Unifying Device. Wireless PID:402d: Applying InputClass "evdev keyboard catchall"
[     3.792] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:402d'
[     3.792] (**) Logitech Unifying Device. Wireless PID:402d: always reports core events
[     3.792] (**) evdev: Logitech Unifying Device. Wireless PID:402d: Device: "/dev/input/event1"
[     3.792] (--) evdev: Logitech Unifying Device. Wireless PID:402d: Vendor 0x46d Product 0xc52b
[     3.792] (--) evdev: Logitech Unifying Device. Wireless PID:402d: Found 20 mouse buttons
[     3.792] (--) evdev: Logitech Unifying Device. Wireless PID:402d: Found scroll wheel(s)
[     3.792] (--) evdev: Logitech Unifying Device. Wireless PID:402d: Found relative axes
[     3.792] (--) evdev: Logitech Unifying Device. Wireless PID:402d: Found x and y relative axes
[     3.792] (--) evdev: Logitech Unifying Device. Wireless PID:402d: Found keys
[     3.792] (II) evdev: Logitech Unifying Device. Wireless PID:402d: Configuring as mouse
[     3.792] (II) evdev: Logitech Unifying Device. Wireless PID:402d: Configuring as keyboard
[     3.792] (II) evdev: Logitech Unifying Device. Wireless PID:402d: Adding scrollwheel support
[     3.792] (**) evdev: Logitech Unifying Device. Wireless PID:402d: YAxisMapping: buttons 4 and 5
[     3.792] (**) evdev: Logitech Unifying Device. Wireless PID:402d: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     3.792] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input3/event1"
[     3.792] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:402d" (type: KEYBOARD, id 8)
[     3.792] (**) Option "xkb_rules" "evdev"
[     3.792] (**) Option "xkb_model" "pc105"
[     3.792] (**) Option "xkb_layout" "fr"
[     3.792] (**) Option "xkb_variant" "latin9"
[     3.792] (II) evdev: Logitech Unifying Device. Wireless PID:402d: initialized for relative axes.
[     3.792] (**) Logitech Unifying Device. Wireless PID:402d: (accel) keeping acceleration scheme 1
[     3.792] (**) Logitech Unifying Device. Wireless PID:402d: (accel) acceleration profile 0
[     3.792] (**) Logitech Unifying Device. Wireless PID:402d: (accel) acceleration factor: 2.000
[     3.792] (**) Logitech Unifying Device. Wireless PID:402d: (accel) acceleration threshold: 4
[     3.793] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:402d (/dev/input/mouse0)
[     3.793] (II) No input driver specified, ignoring this device.
[     3.793] (II) This device may have been added with another device file.
[     3.793] (II) config/udev: Adding input device HP Wide Vision HD (/dev/input/event9)
[     3.793] (**) HP Wide Vision HD: Applying InputClass "evdev keyboard catchall"
[     3.793] (II) Using input driver 'evdev' for 'HP Wide Vision HD'
[     3.793] (**) HP Wide Vision HD: always reports core events
[     3.793] (**) evdev: HP Wide Vision HD: Device: "/dev/input/event9"
[     3.793] (--) evdev: HP Wide Vision HD: Vendor 0x5c8 Product 0x38e
[     3.793] (--) evdev: HP Wide Vision HD: Found keys
[     3.793] (II) evdev: HP Wide Vision HD: Configuring as keyboard
[     3.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input11/event9"
[     3.793] (II) XINPUT: Adding extended input device "HP Wide Vision HD" (type: KEYBOARD, id 9)
[     3.793] (**) Option "xkb_rules" "evdev"
[     3.793] (**) Option "xkb_model" "pc105"
[     3.793] (**) Option "xkb_layout" "fr"
[     3.793] (**) Option "xkb_variant" "latin9"
[     3.793] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[     3.793] (II) No input driver specified, ignoring this device.
[     3.793] (II) This device may have been added with another device file.
[     3.793] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[     3.793] (II) No input driver specified, ignoring this device.
[     3.793] (II) This device may have been added with another device file.
[     3.793] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[     3.793] (II) No input driver specified, ignoring this device.
[     3.793] (II) This device may have been added with another device file.
[     3.794] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     3.794] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     3.794] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     3.794] (**) AT Translated Set 2 keyboard: always reports core events
[     3.794] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     3.794] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     3.794] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     3.794] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     3.794] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     3.794] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     3.794] (**) Option "xkb_rules" "evdev"
[     3.794] (**) Option "xkb_model" "pc105"
[     3.794] (**) Option "xkb_layout" "fr"
[     3.794] (**) Option "xkb_variant" "latin9"
[     3.794] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[     3.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     3.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     3.794] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     3.794] (II) LoadModule: "synaptics"
[     3.794] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     3.795] (II) Module synaptics: vendor="X.Org Foundation"
[     3.795]  compiled for 1.16.0.901, module version = 1.8.99
[     3.795]  Module class: X.Org XInput Driver
[     3.795]  ABI class: X.Org XInput driver, version 21.0
[     3.795] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     3.795] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     3.795] (**) Option "Device" "/dev/input/event2"
[     3.836] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[     3.836] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1360 - 5636 (res 36)
[     3.836] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1298 - 4634 (res 53)
[     3.836] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     3.836] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     3.836] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[     3.836] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     3.836] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     3.836] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     3.836] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     3.980] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
[     3.980] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[     3.980] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     3.980] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     3.980] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.037
[     3.980] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     3.980] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     3.980] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     3.980] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     3.980] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     3.981] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[     3.981] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     3.981] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[     3.981] (II) No input driver specified, ignoring this device.
[     3.981] (II) This device may have been added with another device file.
[     3.982] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     3.982] (II) No input driver specified, ignoring this device.
[     3.982] (II) This device may have been added with another device file.
[     3.982] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[     3.982] (II) No input driver specified, ignoring this device.
[     3.982] (II) This device may have been added with another device file.
[     3.983] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event13)
[     3.983] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     3.983] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[     3.983] (**) HP WMI hotkeys: always reports core events
[     3.983] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event13"
[     3.983] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[     3.983] (--) evdev: HP WMI hotkeys: Found keys
[     3.983] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[     3.983] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event13"
[     3.983] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[     3.983] (**) Option "xkb_rules" "evdev"
[     3.983] (**) Option "xkb_model" "pc105"
[     3.983] (**) Option "xkb_layout" "fr"
[     3.983] (**) Option "xkb_variant" "latin9"
[     3.984] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event3)
[     3.984] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[     3.984] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[     3.984] (**) HP Wireless hotkeys: always reports core events
[     3.984] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event3"
[     3.984] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[     3.984] (--) evdev: HP Wireless hotkeys: Found keys
[     3.984] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[     3.985] (**) Option "config_info" "udev:/sys/devices/virtual/input/input4/event3"
[     3.985] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[     3.985] (**) Option "xkb_rules" "evdev"
[     3.985] (**) Option "xkb_model" "pc105"
[     3.985] (**) Option "xkb_layout" "fr"
[     3.985] (**) Option "xkb_variant" "latin9"
[     3.989] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[     5.161] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    13.027] (EE) FBDEV(0): FBIOBLANK: Invalid argument
fab@Fab-LapTop:~$
 



Voilà est ce que par le biais de windows 10 qui fonctionne correctement je peux récupérer des informations utiles ?

Bonne Journée

flgftl smile

Hors ligne

#5 22-03-2017 17:27:50

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

J'ai installé également les firmaware que tu préconises, mais rien n'a changé.

Hors ligne

#6 22-03-2017 17:34:34

èfpé
Membre
Inscription : 10-07-2016

Re : Bumblebee sans Nvidia ni Nouveau

Re-,

En fait l'option -k ne dit pas grand-chose sur le contrôleur Intel non plus, et le retour de xrandr est un peu maigrichon... en principe le pilote (module du noyau) i915 devrait être utilisé, or ce n'est pas le cas ; que donne :

dmesg | grep firmware


C'est à confirmer, mais je doute que le noyau 3.16 puisse faire tourner cette machine relativement récente de manière optimale... par contre l'upgrade du noyau risque d'être sportive, après l'installation de Bumblebee hmm

Hors ligne

#7 22-03-2017 23:03:06

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir

j'ai plutôt fait un

sudo cat kern.log |grep firmware



car très pollué par des messages répétitifs


Mar 19 18:35:50 Fab-LapTop kernel: [    2.517551] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-9.ucode (-2)
Mar 19 18:35:50 Fab-LapTop kernel: [    2.517577] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 18:35:50 Fab-LapTop kernel: [    2.579387] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-8.ucode (-2)
Mar 19 18:35:50 Fab-LapTop kernel: [    2.579413] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 18:35:50 Fab-LapTop kernel: [    2.589260] iwlwifi 0000:08:00.0: no suitable firmware found!
Mar 19 18:35:50 Fab-LapTop kernel: [    2.606708] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 19 18:35:50 Fab-LapTop kernel: [    2.606753] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 18:35:50 Fab-LapTop kernel: [    2.607307] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 19 18:35:50 Fab-LapTop kernel: [    2.607338] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.bseq (-2)
Mar 19 18:35:50 Fab-LapTop kernel: [    2.607358] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 18:35:57 Fab-LapTop kernel: [   10.071471] nouveau  [  PGRAPH][0000:01:00.0] using external firmware
Mar 19 18:35:57 Fab-LapTop kernel: [   10.071484] nouveau 0000:01:00.0: firmware: failed to load nouveau/nv117_fuc409c (-2)
Mar 19 18:35:57 Fab-LapTop kernel: [   10.071504] nouveau 0000:01:00.0: Direct firmware load failed with error -2
Mar 19 18:35:57 Fab-LapTop kernel: [   10.071803] nouveau 0000:01:00.0: firmware: failed to load nouveau/fuc409c (-2)
Mar 19 18:35:57 Fab-LapTop kernel: [   10.071853] nouveau 0000:01:00.0: Direct firmware load failed with error -2
Mar 19 18:54:54 Fab-LapTop kernel: [    2.738811] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-9.ucode (-2)
Mar 19 18:54:54 Fab-LapTop kernel: [    2.738837] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 18:54:54 Fab-LapTop kernel: [    2.776549] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 19 18:54:54 Fab-LapTop kernel: [    2.776577] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 18:54:54 Fab-LapTop kernel: [    2.783076] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-8.ucode (-2)
Mar 19 18:54:54 Fab-LapTop kernel: [    2.783102] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 18:54:54 Fab-LapTop kernel: [    2.790526] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 19 18:54:54 Fab-LapTop kernel: [    2.790563] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.bseq (-2)
Mar 19 18:54:54 Fab-LapTop kernel: [    2.790583] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 18:54:54 Fab-LapTop kernel: [    2.791771] iwlwifi 0000:08:00.0: no suitable firmware found!
Mar 19 19:00:55 Fab-LapTop kernel: [    2.745872] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-9.ucode (-2)
Mar 19 19:00:55 Fab-LapTop kernel: [    2.745898] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 19:00:55 Fab-LapTop kernel: [    2.785569] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 19 19:00:55 Fab-LapTop kernel: [    2.785597] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 19:00:55 Fab-LapTop kernel: [    2.796444] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-8.ucode (-2)
Mar 19 19:00:55 Fab-LapTop kernel: [    2.796468] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 19:00:55 Fab-LapTop kernel: [    2.800638] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 19 19:00:55 Fab-LapTop kernel: [    2.800678] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.bseq (-2)
Mar 19 19:00:55 Fab-LapTop kernel: [    2.800699] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 19:00:55 Fab-LapTop kernel: [    2.802861] iwlwifi 0000:08:00.0: no suitable firmware found!
Mar 19 19:02:05 Fab-LapTop kernel: [    2.745155] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-9.ucode (-2)
Mar 19 19:02:05 Fab-LapTop kernel: [    2.745184] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 19:02:05 Fab-LapTop kernel: [    2.797597] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 19 19:02:05 Fab-LapTop kernel: [    2.797625] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 19:02:05 Fab-LapTop kernel: [    2.808336] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-8.ucode (-2)
Mar 19 19:02:05 Fab-LapTop kernel: [    2.808361] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 19:02:05 Fab-LapTop kernel: [    2.816843] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 19 19:02:05 Fab-LapTop kernel: [    2.816878] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.bseq (-2)
Mar 19 19:02:05 Fab-LapTop kernel: [    2.816898] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 19:02:05 Fab-LapTop kernel: [    2.821066] iwlwifi 0000:08:00.0: no suitable firmware found!
Mar 19 19:13:34 Fab-LapTop kernel: [    2.649850] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-9.ucode (-2)
Mar 19 19:13:34 Fab-LapTop kernel: [    2.649873] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 19:13:34 Fab-LapTop kernel: [    2.665548] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 19 19:13:34 Fab-LapTop kernel: [    2.665575] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 19:13:34 Fab-LapTop kernel: [    2.716425] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265-8.ucode (-2)
Mar 19 19:13:34 Fab-LapTop kernel: [    2.716451] iwlwifi 0000:08:00.0: Direct firmware load failed with error -2
Mar 19 19:13:34 Fab-LapTop kernel: [    2.722762] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 19 19:13:34 Fab-LapTop kernel: [    2.722856] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.bseq (-2)
Mar 19 19:13:34 Fab-LapTop kernel: [    2.722876] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 19:13:34 Fab-LapTop kernel: [    2.729705] iwlwifi 0000:08:00.0: no suitable firmware found!
Mar 19 19:54:37 Fab-LapTop kernel: [    2.583467] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 19 19:54:37 Fab-LapTop kernel: [    2.583596] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 19 19:54:37 Fab-LapTop kernel: [    2.656254] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 19 19:54:37 Fab-LapTop kernel: [    2.656281] bluetooth hci0: Direct firmware load failed with error -2
Mar 19 19:54:37 Fab-LapTop kernel: [    2.658826] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 19 19:54:37 Fab-LapTop kernel: [    2.658967] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 19 19:54:37 Fab-LapTop kernel: [    2.658969] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 19 19:54:37 Fab-LapTop kernel: [    2.663166] Bluetooth: hci0: Intel Bluetooth firmware patch completed
Mar 20 20:41:22 Fab-LapTop kernel: [    2.681867] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 20 20:41:22 Fab-LapTop kernel: [    2.681987] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 20 20:41:22 Fab-LapTop kernel: [    2.707337] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 20 20:41:22 Fab-LapTop kernel: [    2.707365] bluetooth hci0: Direct firmware load failed with error -2
Mar 20 20:41:22 Fab-LapTop kernel: [    2.754253] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 20 20:41:22 Fab-LapTop kernel: [    2.754612] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 20 20:41:22 Fab-LapTop kernel: [    2.754614] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 20 20:41:22 Fab-LapTop kernel: [    2.758294] Bluetooth: hci0: Intel Bluetooth firmware patch completed
Mar 20 22:15:03 Fab-LapTop kernel: [    2.522184] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 20 22:15:03 Fab-LapTop kernel: [    2.522321] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 20 22:15:03 Fab-LapTop kernel: [    2.621581] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 20 22:15:03 Fab-LapTop kernel: [    2.621623] bluetooth hci0: Direct firmware load failed with error -2
Mar 20 22:15:03 Fab-LapTop kernel: [    2.622034] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 20 22:15:03 Fab-LapTop kernel: [    2.622214] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 20 22:15:03 Fab-LapTop kernel: [    2.622216] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 20 22:15:03 Fab-LapTop kernel: [    2.626322] Bluetooth: hci0: Intel Bluetooth firmware patch completed
Mar 21 17:37:15 Fab-LapTop kernel: [    2.737264] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 21 17:37:15 Fab-LapTop kernel: [    2.737385] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 21 17:37:15 Fab-LapTop kernel: [    2.754577] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 21 17:37:15 Fab-LapTop kernel: [    2.754607] bluetooth hci0: Direct firmware load failed with error -2
Mar 21 17:37:15 Fab-LapTop kernel: [    2.811875] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 21 17:37:15 Fab-LapTop kernel: [    2.812015] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 21 17:37:15 Fab-LapTop kernel: [    2.812018] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 21 17:37:15 Fab-LapTop kernel: [    2.815524] Bluetooth: hci0: Intel Bluetooth firmware patch completed
Mar 22 14:15:17 Fab-LapTop kernel: [    2.799464] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 22 14:15:17 Fab-LapTop kernel: [    2.799706] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 22 14:15:17 Fab-LapTop kernel: [    2.807591] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 22 14:15:17 Fab-LapTop kernel: [    2.807625] bluetooth hci0: Direct firmware load failed with error -2
Mar 22 14:15:17 Fab-LapTop kernel: [    2.822150] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 22 14:15:17 Fab-LapTop kernel: [    2.822303] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 22 14:15:17 Fab-LapTop kernel: [    2.822305] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 22 14:15:17 Fab-LapTop kernel: [    2.826495] Bluetooth: hci0: Intel Bluetooth firmware patch completed
Mar 22 15:52:15 Fab-LapTop kernel: [    2.821213] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 22 15:52:15 Fab-LapTop kernel: [    2.821366] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 22 15:52:15 Fab-LapTop kernel: [    2.872714] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 22 15:52:15 Fab-LapTop kernel: [    2.872755] bluetooth hci0: Direct firmware load failed with error -2
Mar 22 15:52:15 Fab-LapTop kernel: [    2.873214] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 22 15:52:15 Fab-LapTop kernel: [    2.873390] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 22 15:52:15 Fab-LapTop kernel: [    2.873392] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 22 15:52:15 Fab-LapTop kernel: [    2.877686] Bluetooth: hci0: Intel Bluetooth firmware patch completed
Mar 22 15:55:37 Fab-LapTop kernel: [    2.815816] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 22 15:55:37 Fab-LapTop kernel: [    2.815968] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 22 15:55:37 Fab-LapTop kernel: [    2.839777] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 22 15:55:37 Fab-LapTop kernel: [    2.839805] bluetooth hci0: Direct firmware load failed with error -2
Mar 22 15:55:37 Fab-LapTop kernel: [    2.857909] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 22 15:55:37 Fab-LapTop kernel: [    2.858043] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 22 15:55:37 Fab-LapTop kernel: [    2.858045] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 22 15:55:37 Fab-LapTop kernel: [    2.861481] Bluetooth: hci0: Intel Bluetooth firmware patch completed
Mar 22 21:44:38 Fab-LapTop kernel: [    2.711582] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
Mar 22 21:44:38 Fab-LapTop kernel: [    2.711738] iwlwifi 0000:08:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
Mar 22 21:44:38 Fab-LapTop kernel: [    2.756557] bluetooth hci0: firmware: failed to load intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
Mar 22 21:44:38 Fab-LapTop kernel: [    2.756588] bluetooth hci0: Direct firmware load failed with error -2
Mar 22 21:44:38 Fab-LapTop kernel: [    2.778315] Bluetooth: hci0 failed to open Intel firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
Mar 22 21:44:38 Fab-LapTop kernel: [    2.778611] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.bseq
Mar 22 21:44:38 Fab-LapTop kernel: [    2.778616] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.bseq
Mar 22 21:44:38 Fab-LapTop kernel: [    2.782531] Bluetooth: hci0: Intel Bluetooth firmware patch completed
 



si je dois mettre à jour le noyau, je peux peut-être désinstaller bumblebee ?

Bonne soirée

Hors ligne

#8 22-03-2017 23:58:58

èfpé
Membre
Inscription : 10-07-2016

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir,

Pour le coup le retour est pollué de messages obsolètes (depuis l'installation du paquet firmware-iwlwifi, dimanche soir entre 19:13 et 19:54) ; quoi qu'il en soit, aucun firmware en lien avec le contrôleur graphique Intel n'est chargé. Je crois que pour que Bumblebee/Optimus fonctionne correctement, il faudrait déjà que que le GPU primaire soit correctement pris en charge, ce qui ne semble pas être le cas actuellement.

N'ayant pas la moindre idée de la façon dont tu as procédé à l'installation de Bumblebee, je ne me risquerais pas à te guider pour la mise à niveau du noyau c'est toi le spécialiste du vol en rase-motte à grande vitesse et des virages dangereux. Ceci dit l'upgrade concomitante du paquet firmware-iwlwifi pourrait t'éviter de perdre le réseau Wi-Fi (et te permettre de gagner le Bluetooth) ; pour le réseau Ethernet ce sera la surprise (firmware-realtek ?).

Note : apparemment/curieusement le contrôleur GTX 950M requiert un firmware (nouveau/nv117_fuc409c), pas cool ça hmm

Dernière modification par èfpé (23-03-2017 00:10:10)

Hors ligne

#9 23-03-2017 09:53:51

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonjour,

En fait je n'ai rien fait de particulier pour l'installation, j'avais ajouté quelques firmware manquant, dont firmware-iwlwifi. Mon wifi fonctionne très bien, pas le Bluetooth.

Je pense que tout n'est pas si bien pris en charge que ça sous debian, encore une fois je n'ai fait que suivre les deux tuto du site.

Merci pour ton aide, je vais essayer de partir directement avec une testing dès l'installation.

Bonne journée

flylowgofastturnleft (Reno Air Race)

Hors ligne

#10 23-03-2017 15:43:13

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonjour,

J'ai tout réinstaller avec la Stretch, du coup plus de problème de grub cette fois ci, j'avais quelques firmware manquant que j'ai ajouté : firmware-iwlwifi, firmware-realtek, firmware-misc-non-free. Je récupère mon wifi à ce moment là, mais il manque tout de même certaines mise à jour qui sont visiblement pas encore disponibles !

[    0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=fc01cf19-9613-48ec-818c-c426810f3b7b ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000063fbbfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000063fbc000-0x0000000063fbcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000063fbd000-0x0000000063fe6fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000063fe7000-0x000000007a28dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a28e000-0x000000007a48dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007a48e000-0x000000007ac7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ac7e000-0x000000007ae7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ae7e000-0x000000007aefdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007aefe000-0x000000007aefefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007aeff000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x7a4fb000  ESRT=0x7a4fe718  ACPI 2.0=0x7aefd014  PROP=0x629c3238
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: HP OMEN by HP Laptop/8257, BIOS F.23 10/13/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 007AEFF000 mask 7FFFFFF000 uncachable
[    0.000000]   2 base 007AF00000 mask 7FFFF00000 uncachable
[    0.000000]   3 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   5 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0x7aeff000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x7aeff max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000007a4fe718 to 0x000000007a4fe750.
[    0.000000] Base memory trampoline at [ffff8aea80081000] 81000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x19392b000, 0x19392bfff] PGTABLE
[    0.000000] BRK [0x19392c000, 0x19392cfff] PGTABLE
[    0.000000] BRK [0x19392d000, 0x19392dfff] PGTABLE
[    0.000000] BRK [0x19392e000, 0x19392efff] PGTABLE
[    0.000000] BRK [0x19392f000, 0x19392ffff] PGTABLE
[    0.000000] BRK [0x193930000, 0x193930fff] PGTABLE
[    0.000000] BRK [0x193931000, 0x193931fff] PGTABLE
[    0.000000] BRK [0x193932000, 0x193932fff] PGTABLE
[    0.000000] BRK [0x193933000, 0x193933fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b39000-0x36d93fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007AEFD014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000007AEDA188 000104 (v01 HPQOEM SLIC-MPC 00000000 HP   01000013)
[    0.000000] ACPI: FACP 0x000000007AEDF000 0000F4 (v05 HPQOEM SLIC-MPC 00000000 HP   00040000)
[    0.000000] ACPI: DSDT 0x000000007AEBC000 01D086 (v02 HPQOEM 8257     00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007AE4A000 000040
[    0.000000] ACPI: TCPA 0x000000007AEFC000 000032 (v02 HPQOEM 8257     00000000 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000007AEFB000 000236 (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: UEFI 0x000000007AEFA000 000042 (v01 HPQOEM 8257     00000002 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000007AEF9000 0004B7 (v02 HPQOEM 8257     00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AEF8000 00004B (v02 HPQOEM 8257     00003000 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000007AEF7000 000034 (v03 HPQOEM 8257     00000000 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000007AEF0000 006E92 (v01 HPQOEM 8257     00001000 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000007AEEF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000007AEEA000 004E60 (v02 HPQOEM 8257     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AEE6000 003585 (v02 HPQOEM 8257     00001000 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007AEE5000 000034 (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: DBG2 0x000000007AEE4000 000054 (v00 HPQOEM 8257     00000000 HP   00040000)
[    0.000000] ACPI: ASF! 0x000000007AEE3000 0000A5 (v32 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: ASPT 0x000000007AEE2000 000034 (v07 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: BOOT 0x000000007AEE1000 000028 (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: DBGP 0x000000007AEE0000 000034 (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: HPET 0x000000007AEDE000 000038 (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: LPIT 0x000000007AEDD000 000094 (v01 HPQOEM 8257     00000000 HP   00040000)
[    0.000000] ACPI: APIC 0x000000007AEDC000 0000BC (v03 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: MCFG 0x000000007AEDB000 00003C (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: SSDT 0x000000007AEBB000 0002D4 (v01 HPQOEM 8257     00000000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AEB8000 002BAE (v02 HPQOEM 8257     00001000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AEB7000 000E73 (v02 HPQOEM 8257     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007AEB2000 004396 (v01 HPQOEM 8257     00001000 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000007AEB1000 0000A8 (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: FPDT 0x000000007AEB0000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.000000] ACPI: BGRT 0x000000007AEAF000 000038 (v01 HPQOEM 8257     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27effb000-0x27effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000063fbbfff]
[    0.000000]   node   0: [mem 0x0000000063fe7000-0x000000007a28dfff]
[    0.000000]   node   0: [mem 0x000000007aefe000-0x000000007aefefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.000000] On node 0 totalpages: 2068970
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 58 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7754 pages used for memmap
[    0.000000]   DMA32 zone: 496228 pages, LIFO batch:31
[    0.000000]   Normal zone: 24512 pages used for memmap
[    0.000000]   Normal zone: 1568768 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x63fbc000-0x63fbcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x63fbd000-0x63fe6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a28e000-0x7a48dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a48e000-0x7ac7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ac7e000-0x7ae7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ae7e000-0x7aefdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7aeff000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8aecfec00000 s103384 r8192 d31784 u524288
[    0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2036582
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=fc01cf19-9613-48ec-818c-c426810f3b7b ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7843384K/8275880K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 432496K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:1024 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2300.000 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=9216000)
[    0.000028] pid_max: default: 32768 minimum: 301
[    0.000042] ACPI: Core revision 20160831
[    0.046672] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.048218] Security Framework initialized
[    0.048220] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.048225] AppArmor: AppArmor disabled by boot time parameter
[    0.048667] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.050333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.051073] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.051081] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.051341] CPU: Physical Processor ID: 0
[    0.051341] CPU: Processor Core ID: 0
[    0.051345] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.051346] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.051351] mce: CPU supports 10 MCE banks
[    0.051361] CPU0: Thermal monitoring enabled (TM1)
[    0.051384] process: using mwait in idle threads
[    0.051387] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.051387] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.052082] Freeing SMP alternatives memory: 24K (ffffffff9b678000 - ffffffff9b67e000)
[    0.062342] ftrace: allocating 24999 entries in 98 pages
[    0.073776] smpboot: Max logical packages: 1
[    0.073786] DMAR: Host address width 39
[    0.073788] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.073793] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.073794] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.073798] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.073799] DMAR: RMRR base: 0x0000007aba9000 end: 0x0000007abc8fff
[    0.073800] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    0.073802] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.073802] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.073803] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.073804] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.075231] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.075232] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.429606] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.469299] TSC deadline timer enabled
[    0.469304] smpboot: CPU0: Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.469307] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.469340] ... version:                4
[    0.469341] ... bit width:              48
[    0.469341] ... generic registers:      8
[    0.469342] ... value mask:             0000ffffffffffff
[    0.469342] ... max period:             00007fffffffffff
[    0.469343] ... fixed-purpose events:   3
[    0.469343] ... event mask:             00000007000000ff
[    0.469944] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.470037] x86: Booting SMP configuration:
[    0.470038] .... node  #0, CPUs:      #1 #2 #3
[    0.711440] x86: Booted up 1 node, 4 CPUs
[    0.711442] smpboot: Total of 4 processors activated (18435.22 BogoMIPS)
[    0.715321] devtmpfs: initialized
[    0.715383] x86/mm: Memory block size: 128MB
[    0.717924] PM: Registering ACPI NVS region [mem 0x63fbc000-0x63fbcfff] (4096 bytes)
[    0.717925] PM: Registering ACPI NVS region [mem 0x7ac7e000-0x7ae7dfff] (2097152 bytes)
[    0.718023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.718033] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.718071] pinctrl core: initialized pinctrl subsystem
[    0.718173] NET: Registered protocol family 16
[    0.727047] cpuidle: using governor ladder
[    0.743056] cpuidle: using governor menu
[    0.743108] Simple Boot Flag at 0x44 set to 0x1
[    0.743124] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.743125] ACPI: bus type PCI registered
[    0.743126] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.743196] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.743198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.743202] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.743462] PCI: Using configuration type 1 for base access
[    0.759196] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.759196] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.759431] ACPI: Added _OSI(Module Device)
[    0.759432] ACPI: Added _OSI(Processor Device)
[    0.759433] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.759434] ACPI: Added _OSI(Processor Aggregator Device)
[    0.760744] ACPI: Executed 18 blocks of module-level executable AML code
[    0.773005] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.777900] ACPI: Dynamic OEM Table Load:
[    0.777958] ACPI: SSDT 0xFFFF8AECF494E800 000579 (v02 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.778237] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.779746] ACPI: Dynamic OEM Table Load:
[    0.779756] ACPI: SSDT 0xFFFF8AECF498CC00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.780849] ACPI: Dynamic OEM Table Load:
[    0.780859] ACPI: SSDT 0xFFFF8AECF496C800 0005AA (v02 PmRef  ApIst    00003000 INTL 20130117)
[    0.781472] ACPI: Dynamic OEM Table Load:
[    0.781481] ACPI: SSDT 0xFFFF8AECF497F200 000119 (v02 PmRef  ApCst    00003000 INTL 20130117)
[    0.784067] ACPI : EC: EC started
[    3.761423] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    3.761424] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    3.761426] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    3.761426] ACPI: Interpreter enabled
[    3.761487] ACPI: (supports S0 S3 S4 S5)
[    3.761488] ACPI: Using IOAPIC for interrupt routing
[    3.761536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    3.762272] ACPI: Power Resource [PG00] (on)
[    3.816114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    3.816120] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    3.819590] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    3.819591] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    3.822178] PCI host bridge to bus 0000:00
[    3.822181] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    3.822182] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    3.822183] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    3.822184] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    3.822186] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    3.822187] pci_bus 0000:00: root bus resource [bus 00-fe]
[    3.822194] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    3.823259] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    3.823301] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    3.824368] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    3.824377] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[    3.824384] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    3.824388] pci 0000:00:02.0: reg 0x20: [io  0x6000-0x603f]
[    3.825477] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    3.825487] pci 0000:00:04.0: reg 0x10: [mem 0xa4520000-0xa4527fff 64bit]
[    3.826646] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    3.826665] pci 0000:00:14.0: reg 0x10: [mem 0xa4500000-0xa450ffff 64bit]
[    3.826738] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    3.827793] pci 0000:00:14.0: System wakeup disabled by ACPI
[    3.827839] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    3.827858] pci 0000:00:14.2: reg 0x10: [mem 0xa4532000-0xa4532fff 64bit]
[    3.828978] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    3.829000] pci 0000:00:16.0: reg 0x10: [mem 0xa4533000-0xa4533fff 64bit]
[    3.829079] pci 0000:00:16.0: PME# supported from D3hot
[    3.830181] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    3.830196] pci 0000:00:17.0: reg 0x10: [mem 0xa4530000-0xa4531fff]
[    3.830204] pci 0000:00:17.0: reg 0x14: [mem 0xa4536000-0xa45360ff]
[    3.830211] pci 0000:00:17.0: reg 0x18: [io  0x6080-0x6087]
[    3.830219] pci 0000:00:17.0: reg 0x1c: [io  0x6088-0x608b]
[    3.830227] pci 0000:00:17.0: reg 0x20: [io  0x6060-0x607f]
[    3.830235] pci 0000:00:17.0: reg 0x24: [mem 0xa4534000-0xa45347ff]
[    3.830279] pci 0000:00:17.0: PME# supported from D3hot
[    3.831369] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    3.831438] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    3.832513] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    3.832566] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[    3.832636] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    3.833718] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    3.833757] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[    3.833827] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    3.834903] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    3.834945] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    3.835021] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    3.836093] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    3.836159] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[    3.837342] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    3.837355] pci 0000:00:1f.2: reg 0x10: [mem 0xa452c000-0xa452ffff]
[    3.838488] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    3.838513] pci 0000:00:1f.3: reg 0x10: [mem 0xa4528000-0xa452bfff 64bit]
[    3.838548] pci 0000:00:1f.3: reg 0x20: [mem 0xa4510000-0xa451ffff 64bit]
[    3.838602] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    3.839693] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    3.839737] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    3.839785] pci 0000:00:1f.4: reg 0x10: [mem 0xa4535000-0xa45350ff 64bit]
[    3.839855] pci 0000:00:1f.4: reg 0x20: [io  0x6040-0x605f]
[    3.841044] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[    3.841052] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[    3.841059] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    3.841066] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    3.841070] pci 0000:01:00.0: reg 0x24: [io  0x5000-0x507f]
[    3.841075] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    3.841150] pci 0000:01:00.0: System wakeup disabled by ACPI
[    3.849401] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    3.849404] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    3.849406] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    3.849409] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    3.849475] pci 0000:07:00.0: [10ec:522a] type 00 class 0xff0000
[    3.849494] pci 0000:07:00.0: reg 0x10: [mem 0xa4400000-0xa4400fff]
[    3.849629] pci 0000:07:00.0: supports D1 D2
[    3.849630] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    3.849727] pci 0000:07:00.0: System wakeup disabled by ACPI
[    3.861409] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    3.861414] pci 0000:00:1c.0:   bridge window [mem 0xa4400000-0xa44fffff]
[    3.861636] pci 0000:08:00.0: [8086:095a] type 00 class 0x028000
[    3.861720] pci 0000:08:00.0: reg 0x10: [mem 0xa4300000-0xa4301fff 64bit]
[    3.862105] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    3.862311] pci 0000:08:00.0: System wakeup disabled by ACPI
[    3.873565] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    3.873569] pci 0000:00:1c.5:   bridge window [mem 0xa4300000-0xa43fffff]
[    3.873636] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[    3.873655] pci 0000:09:00.0: reg 0x10: [io  0x4000-0x40ff]
[    3.873683] pci 0000:09:00.0: reg 0x18: [mem 0xa4204000-0xa4204fff 64bit]
[    3.873700] pci 0000:09:00.0: reg 0x20: [mem 0xa4200000-0xa4203fff 64bit]
[    3.873795] pci 0000:09:00.0: supports D1 D2
[    3.873796] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.873895] pci 0000:09:00.0: System wakeup disabled by ACPI
[    3.885420] pci 0000:00:1c.6: PCI bridge to [bus 09]
[    3.885423] pci 0000:00:1c.6:   bridge window [io  0x4000-0x4fff]
[    3.885426] pci 0000:00:1c.6:   bridge window [mem 0xa4200000-0xa42fffff]
[    3.885551] pci 0000:0a:00.0: [144d:a802] type 00 class 0x010802
[    3.885570] pci 0000:0a:00.0: reg 0x10: [mem 0xa4100000-0xa4103fff 64bit]
[    3.885579] pci 0000:0a:00.0: reg 0x18: [io  0x3000-0x30ff]
[    3.885767] pci 0000:0a:00.0: System wakeup disabled by ACPI
[    3.897487] pci 0000:00:1d.0: PCI bridge to [bus 0a]
[    3.897490] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    3.897493] pci 0000:00:1d.0:   bridge window [mem 0xa4100000-0xa41fffff]
[    3.913526] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.913583] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    3.913637] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.913691] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.913744] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.913798] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.913851] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.913904] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    3.914238] platform MSFT0101:00: failed to claim resource 1
[    3.914243] acpi MSFT0101:00: platform device creation failed: -16
[    3.914482] ACPI: Enabled 7 GPEs in block 00 to 7F
[    3.914701] ACPI : EC: event unblocked
[    3.914714] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    3.914715] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    3.914851] vgaarb: setting as boot device: PCI:0000:00:02.0
[    3.914852] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    3.914855] vgaarb: loaded
[    3.914856] vgaarb: bridge control possible 0000:00:02.0
[    3.914889] Registered efivars operations
[    3.973549] PCI: Using ACPI for IRQ routing
[    4.001523] PCI: pci_cache_line_size set to 64 bytes
[    4.001935] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    4.001937] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    4.001937] e820: reserve RAM buffer [mem 0x63fbc000-0x63ffffff]
[    4.001938] e820: reserve RAM buffer [mem 0x7a28e000-0x7bffffff]
[    4.001940] e820: reserve RAM buffer [mem 0x7aeff000-0x7bffffff]
[    4.001940] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    4.002122] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    4.002127] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    4.004172] clocksource: Switched to clocksource hpet
[    4.010388] VFS: Disk quotas dquot_6.6.0
[    4.010409] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.010485] pnp: PnP ACPI init
[    4.011368] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    4.011370] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    4.011371] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    4.011373] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    4.011374] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    4.011375] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    4.011377] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    4.011380] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.011762] system 00:01: [io  0x2000-0x20fe] has been reserved
[    4.011764] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.012006] system 00:02: [io  0x0680-0x069f] has been reserved
[    4.012007] system 00:02: [io  0xffff] has been reserved
[    4.012009] system 00:02: [io  0xffff] has been reserved
[    4.012010] system 00:02: [io  0xffff] has been reserved
[    4.012011] system 00:02: [io  0x1800-0x18fe] has been reserved
[    4.012012] system 00:02: [io  0x164e-0x164f] has been reserved
[    4.012014] system 00:02: [io  0x0454-0x0457] has been reserved
[    4.012016] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.012130] system 00:03: [io  0x0800-0x087f] has been reserved
[    4.012132] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.012159] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.012214] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    4.012250] pnp 00:06: Plug and Play ACPI device, IDs SYN3239 SYN1e00 SYN0002 PNP0f13 (active)
[    4.013953] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    4.013954] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    4.013955] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    4.013957] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.014603] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    4.014604] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    4.014606] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    4.014607] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    4.014608] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    4.014610] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    4.014611] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    4.014613] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    4.014614] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    4.014615] system 00:08: [mem 0x80000000-0x8001ffff] has been reserved
[    4.014617] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    4.015196] pnp: PnP ACPI: found 9 devices
[    4.022329] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.022332] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    4.022346] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    4.022348] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[    4.022369] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    4.022370] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    4.022371] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    4.022373] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    4.022379] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[    4.022381] pci 0000:00:1c.0: BAR 13: assigned [io  0x7000-0x7fff]
[    4.022384] pci 0000:01:00.0: BAR 6: assigned [mem 0xa4000000-0xa407ffff pref]
[    4.022387] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    4.022389] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    4.022392] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa40fffff]
[    4.022394] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    4.022398] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    4.022399] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    4.022403] pci 0000:00:1c.0:   bridge window [mem 0xa4400000-0xa44fffff]
[    4.022406] pci 0000:00:1c.0:   bridge window [mem 0x80100000-0x802fffff 64bit pref]
[    4.022410] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    4.022414] pci 0000:00:1c.5:   bridge window [mem 0xa4300000-0xa43fffff]
[    4.022420] pci 0000:00:1c.6: PCI bridge to [bus 09]
[    4.022422] pci 0000:00:1c.6:   bridge window [io  0x4000-0x4fff]
[    4.022425] pci 0000:00:1c.6:   bridge window [mem 0xa4200000-0xa42fffff]
[    4.022431] pci 0000:00:1d.0: PCI bridge to [bus 0a]
[    4.022433] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    4.022437] pci 0000:00:1d.0:   bridge window [mem 0xa4100000-0xa41fffff]
[    4.022444] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    4.022446] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    4.022447] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    4.022448] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
[    4.022449] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    4.022450] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    4.022451] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa40fffff]
[    4.022452] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    4.022453] pci_bus 0000:07: resource 0 [io  0x7000-0x7fff]
[    4.022454] pci_bus 0000:07: resource 1 [mem 0xa4400000-0xa44fffff]
[    4.022455] pci_bus 0000:07: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
[    4.022456] pci_bus 0000:08: resource 1 [mem 0xa4300000-0xa43fffff]
[    4.022457] pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
[    4.022458] pci_bus 0000:09: resource 1 [mem 0xa4200000-0xa42fffff]
[    4.022460] pci_bus 0000:0a: resource 0 [io  0x3000-0x3fff]
[    4.022460] pci_bus 0000:0a: resource 1 [mem 0xa4100000-0xa41fffff]
[    4.022637] NET: Registered protocol family 2
[    4.022792] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    4.022917] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    4.023018] TCP: Hash tables configured (established 65536 bind 65536)
[    4.023036] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    4.023059] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    4.023116] NET: Registered protocol family 1
[    4.023129] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    4.025100] PCI: CLS 64 bytes, default 64
[    4.025146] Unpacking initramfs...
[    4.400857] Freeing initrd memory: 18796K (ffff8aeab5b39000 - ffff8aeab6d94000)
[    4.400917] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.400918] software IO TLB [mem 0x6d717000-0x71717000] (64MB) mapped at [ffff8aeaed717000-ffff8aeaf1716fff]
[    4.401253] audit: initializing netlink subsys (disabled)
[    4.401268] audit: type=2000 audit(1490278612.028:1): initialized
[    4.401628] Initialise system trusted keyrings
[    4.401750] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    4.401812] zbud: loaded
[    4.443688] Key type asymmetric registered
[    4.443688] Asymmetric key parser 'x509' registered
[    4.443706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    4.443739] io scheduler noop registered
[    4.443740] io scheduler deadline registered
[    4.443758] io scheduler cfq registered (default)
[    4.444953] aer 0000:00:1c.0:pcie002: service driver aer loaded
[    4.444972] aer 0000:00:1c.5:pcie002: service driver aer loaded
[    4.444991] aer 0000:00:1c.6:pcie002: service driver aer loaded
[    4.445010] aer 0000:00:1d.0:pcie002: service driver aer loaded
[    4.445026] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    4.445027] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    4.445029] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[    4.445037] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    4.445038] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    4.445041] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    4.445048] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    4.445049] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    4.445052] pcie_pme 0000:00:1c.5:pcie001: service driver pcie_pme loaded
[    4.445059] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[    4.445060] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    4.445062] pcie_pme 0000:00:1c.6:pcie001: service driver pcie_pme loaded
[    4.445070] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[    4.445071] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
[    4.445074] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[    4.445081] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.445090] pciehp 0000:00:1c.0:pcie004: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    4.445119] pciehp 0000:00:1c.0:pcie004: service driver pciehp loaded
[    4.445123] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.445137] efifb: probing for efifb
[    4.445156] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[    4.445157] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    4.445158] efifb: scrolling: redraw
[    4.445159] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.449681] Console: switching to colour frame buffer device 240x67
[    4.454078] fb0: EFI VGA frame buffer device
[    4.454085] intel_idle: MWAIT substates: 0x11142120
[    4.454085] intel_idle: v0.4.1 model 0x5E
[    4.454308] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.454526] GHES: HEST is not enabled!
[    4.454579] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.455202] Linux agpgart interface v0.103
[    4.455246] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    4.455247] AMD IOMMUv2 functionality not available on this system
[    4.455626] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.463920] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.463924] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.464080] mousedev: PS/2 mouse device common for all mice
[    4.464125] rtc_cmos 00:04: RTC can wake from S4
[    4.464635] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.464718] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.464725] intel_pstate: Intel P-state driver initializing
[    4.465065] intel_pstate: HWP enabled
[    4.465253] ledtrig-cpu: registered to indicate activity on CPUs
[    4.465776] NET: Registered protocol family 10
[    4.466196] mip6: Mobile IPv6
[    4.466197] NET: Registered protocol family 17
[    4.466218] mpls_gso: MPLS GSO support
[    4.466440] microcode: sig=0x506e3, pf=0x20, revision=0x84
[    4.466633] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.466885] registered taskstats version 1
[    4.466886] Loading compiled-in X.509 certificates
[    4.468300] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    4.468503] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    4.468513] zswap: loaded using pool lzo/zbud
[    4.469897] rtc_cmos 00:04: setting system clock to 2017-03-23 14:16:52 UTC (1490278612)
[    4.469961] PM: Hibernation image not present or could not be loaded.
[    4.470818] Freeing unused kernel memory: 1392K (ffffffff9b51c000 - ffffffff9b678000)
[    4.470818] Write protecting the kernel read-only data: 12288k
[    4.471292] Freeing unused kernel memory: 2032K (ffff8aec13004000 - ffff8aec13200000)
[    4.473056] Freeing unused kernel memory: 1252K (ffff8aec134c7000 - ffff8aec13600000)
[    4.477044] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.488765] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.488806] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.488811] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.489422] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.489441] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.490323] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.490357] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.490366] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.490546] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.490578] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.504027] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    4.505957] hidraw: raw HID events driver (C) Jiri Kosina
[    4.518511] [Firmware Bug]: Invalid critical threshold (0)
[    4.519629] SCSI subsystem initialized
[    4.519864] ACPI: bus type USB registered
[    4.519879] usbcore: registered new interface driver usbfs
[    4.519886] usbcore: registered new interface driver hub
[    4.519898] usbcore: registered new device driver usb
[    4.522325] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 127
[    4.523221] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.523225] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.523832] libata version 3.00 loaded.
[    4.524332] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    4.524337] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.524412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.524413] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.524413] usb usb1: Product: xHCI Host Controller
[    4.524414] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    4.524415] usb usb1: SerialNumber: 0000:00:14.0
[    4.524509] hub 1-0:1.0: USB hub found
[    4.524526] hub 1-0:1.0: 16 ports detected
[    4.526425] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.526430] r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.527036] nvme nvme0: pci function 0000:0a:00.0
[    4.541375] r8169 0000:09:00.0 eth0: RTL8168h/8111h at 0xffff97ad40cdd000, 98:e7:f4:6b:f8:b5, XID 14100800 IRQ 130
[    4.541376] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.542900] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.544497] AVX2 version of gcm_enc/dec engaged.
[    4.544497] AES CTR mode by8 optimization enabled
[    4.545158] r8169 0000:09:00.0 eno1: renamed from eth0
[    4.548521] thermal LNXTHERM:00: registered as thermal_zone0
[    4.548522] ACPI: Thermal Zone [TZ01] (40 C)
[    4.559233] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.559235] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.559275] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    4.559276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.559333] usb usb2: Product: xHCI Host Controller
[    4.559334] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[    4.559335] usb usb2: SerialNumber: 0000:00:14.0
[    4.559457] hub 2-0:1.0: USB hub found
[    4.559481] hub 2-0:1.0: 8 ports detected
[    4.562125] usb: port power management may be unreliable
[    4.565109] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.565144] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.572721] ahci 0000:00:17.0: version 3.0
[    4.582936] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xe impl SATA mode
[    4.582937] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    4.605426] scsi host0: ahci
[    4.605601] scsi host1: ahci
[    4.605773] scsi host2: ahci
[    4.605959] scsi host3: ahci
[    4.606012] ata1: DUMMY
[    4.606014] ata2: SATA max UDMA/133 abar m2048@0xa4534000 port 0xa4534180 irq 131
[    4.606016] ata3: SATA max UDMA/133 abar m2048@0xa4534000 port 0xa4534200 irq 131
[    4.606017] ata4: SATA max UDMA/133 abar m2048@0xa4534000 port 0xa4534280 irq 131
[    4.637539]  nvme0n1: p1 p2 p3 p4 p5
[    4.884241] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    4.916283] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.916316] ata3: SATA link down (SStatus 4 SControl 300)
[    4.916349] ata4: SATA link down (SStatus 4 SControl 300)
[    4.918171] ata2.00: ATA-9: HGST HTS721010A9E630, JB0OA3T0, max UDMA/133
[    4.918175] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.918447] random: fast init done
[    4.920608] ata2.00: configured for UDMA/133
[    4.921247] scsi 1:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3T0 PQ: 0 ANSI: 5
[    4.962420] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.962423] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    4.962496] sd 1:0:0:0: [sda] Write Protect is off
[    4.962500] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.962530] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.027662] usb 1-1: New USB device found, idVendor=046d, idProduct=c52b
[    5.027666] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.027668] usb 1-1: Product: USB Receiver
[    5.027670] usb 1-1: Manufacturer: Logitech
[    5.037878] usbcore: registered new interface driver usbhid
[    5.037880] usbhid: USB HID core driver
[    5.041556] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input2
[    5.148289] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    5.170182] logitech-hidpp-device 0003:046D:402D.0004: hidraw1: USB HID v1.11 Keyboard [Logitech M560] on usb-0000:00:14.0-1:1
[    5.273278]  sda: sda1 sda2 sda3 sda4
[    5.275140] sd 1:0:0:0: [sda] Attached SCSI disk
[    5.330801] usb 1-4: New USB device found, idVendor=05c8, idProduct=038e
[    5.330805] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.330807] usb 1-4: Product: HP Wide Vision HD
[    5.330810] usb 1-4: Manufacturer: Generic
[    5.330812] usb 1-4: SerialNumber: 200901010001
[    5.406822] psmouse serio1: synaptics: queried max coordinates: x [..5636], y [..4634]
[    5.424264] tsc: Refined TSC clocksource calibration: 2304.000 MHz
[    5.424277] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[    5.448848] psmouse serio1: synaptics: queried min coordinates: x [1360..], y [1298..]
[    5.452270] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[    5.528797] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3114, fw id: 1805562
[    5.580765] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    5.597908] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
[    5.597911] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.808849] PM: Starting manual resume from disk
[    5.808854] PM: Hibernation image partition 8:3 present
[    5.808855] PM: Looking for hibernation image.
[    5.809155] PM: Image not found (code -22)
[    5.809157] PM: Hibernation image not present or could not be loaded.
[    5.937471] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    6.000924] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    6.016468] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.120799] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.120890] systemd[1]: Detected architecture x86-64.
[    6.120995] systemd[1]: Set hostname to <Fab-LapTop>.
[    6.155844] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.155925] systemd[1]: Listening on Journal Audit Socket.
[    6.155959] systemd[1]: Reached target Remote File Systems.
[    6.156003] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.156073] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.156104] systemd[1]: Reached target Encrypted Volumes.
[    6.156146] systemd[1]: Listening on udev Kernel Socket.
[    6.168219] EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro
[    6.170351] lp: driver loaded but no devices found
[    6.171752] ppdev: user-space parallel port driver
[    6.209851] systemd-journald[214]: Received request to flush runtime journal from PID 1
[    6.244482] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    6.244984] ACPI: Lid Switch [LID0]
[    6.245045] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    6.245048] ACPI: Power Button [PWRB]
[    6.245082] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    6.245083] ACPI: Power Button [PWRF]
[    6.245283] ACPI: AC Adapter [ADP1] (off-line)
[    6.245309] Initializing HPQ6001 module
[    6.245347] input: HP Wireless hotkeys as /devices/virtual/input/input6
[    6.250779] hp_accel: laptop model unknown, using default axes configuration
[    6.265297] lis3lv02d: 8 bits 3DC sensor found
[    6.288390] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[    6.288864] wmi: Mapper loaded
[    6.309452] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    6.310636] media: Linux media interface: v0.10
[    6.315413] Linux video capture interface: v2.00
[    6.319457] iTCO_vendor_support: vendor-support=0
[    6.319503] [drm] Initialized
[    6.319847] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    6.320365] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.320478] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    6.327501] uvcvideo: Found UVC 1.00 device HP Wide Vision HD (05c8:038e)
[    6.329442] Bluetooth: Core ver 2.22
[    6.329457] NET: Registered protocol family 31
[    6.329457] Bluetooth: HCI device and connection manager initialized
[    6.329459] Bluetooth: HCI socket layer initialized
[    6.329461] Bluetooth: L2CAP socket layer initialized
[    6.329467] Bluetooth: SCO socket layer initialized
[    6.331069] EFI Variables Facility v0.08 2004-May-17
[    6.334071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.337981] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[    6.337985] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[    6.337987] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[    6.338070] input: HP Wide Vision HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input8
[    6.338097] usbcore: registered new interface driver uvcvideo
[    6.338098] USB Video Class driver (1.1.1)
[    6.378188] usbcore: registered new interface driver btusb
[    6.386185] pstore: using zlib compression
[    6.386197] pstore: Registered efi as persistent store backend
[    6.388834] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    6.394365] [drm] Memory usable by graphics device = 4096M
[    6.394367] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[    6.394368] fb: switching to inteldrmfb from EFI VGA
[    6.394442] Console: switching to colour dummy device 80x25
[    6.394525] ACPI: Battery Slot [BAT0] (battery present)
[    6.395314] [drm] Replacing VGA console driver
[    6.396508] Bluetooth: hci0: read Intel version: 370810011003110e00
[    6.397279] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    6.397282] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    6.400732] Intel(R) Wireless WiFi driver for Linux
[    6.400732] Copyright(c) 2003- 2015 Intel Corporation
[    6.402337] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2)
[    6.402341] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[    6.402348] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2)
[    6.402350] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[    6.402356] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2)
[    6.402357] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    6.402363] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2)
[    6.402364] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    6.403018] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.403019] [drm] Driver supports precise vblank timestamp query.
[    6.404512] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265D-22.ucode
[    6.404692] iwlwifi 0000:08:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    6.406241] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    6.406241] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.406242] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.406243] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.406243] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.406243] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    6.410570] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.412560] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[    6.413412] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[    6.426028] [drm] GuC firmware load skipped
[    6.427749] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    6.427757] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    6.427924] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input10
[    6.431695] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.431860] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    6.432008] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    6.434842] iwlwifi 0000:08:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    6.437369] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    6.438362] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    6.444109] input: HP WMI hotkeys as /devices/virtual/input/input12
[    6.457727] clocksource: Switched to clocksource tsc
[    6.484203] intel_rapl: Found RAPL domain package
[    6.484205] intel_rapl: Found RAPL domain core
[    6.484206] intel_rapl: Found RAPL domain uncore
[    6.484208] intel_rapl: Found RAPL domain dram
[    6.513744] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    6.515733] iwlwifi 0000:08:00.0 wlo1: renamed from wlan0
[    6.535019] random: crng init done
[    6.688148] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    6.796394] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.796688] fbcon: inteldrmfb (fb0) is primary device
[    6.823446] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.823448] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.823449] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.823450] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.823451] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.823452] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[    6.823453] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    6.834673] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    6.834744] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    6.834802] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    6.834871] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    6.834929] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    7.043643] Adding 7812092k swap on /dev/sda3.  Priority:-1 extents:1 across:7812092k FS
[    7.167760] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    8.072019] Console: switching to colour frame buffer device 240x67
[    8.095444] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.157904] bbswitch: loading out-of-tree module taints kernel.
[    8.157945] bbswitch: module verification failed: signature and/or required key missing - tainting kernel
[    8.158084] bbswitch: version 0.8
[    8.158087] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    8.158091] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    8.158106] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    8.158159] bbswitch: detected an Optimus _DSM function
[    8.158167] pci 0000:01:00.0: enabling device (0000 -> 0003)
[    8.158290] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    8.158624] bbswitch: disabling discrete graphics
[    8.158629] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[    8.181167] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.181168] Bluetooth: BNEP filters: protocol multicast
[    8.181171] Bluetooth: BNEP socket layer initialized
[    8.208440] [drm] RC6 on
[    8.356747] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    8.359077] r8169 0000:09:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
[    8.391302] r8169 0000:09:00.0 eno1: link down
[    8.391381] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[    8.394208] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    8.396727] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.397185] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.462636] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.463095] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.489017] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    8.500402] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.500863] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.567160] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.567614] iwlwifi 0000:08:00.0: L1 Enabled - LTR Enabled
[    8.601578] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    8.615987] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[    8.620039] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[    8.624046] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[    8.626034] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[    8.666769] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    9.950538] Bluetooth: RFCOMM TTY layer initialized
[    9.950549] Bluetooth: RFCOMM socket layer initialized
[    9.950556] Bluetooth: RFCOMM ver 1.11
[   12.341028] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   12.397851] wlo1: authenticate with e0:ce:c3:1c:4f:b9
[   12.406159] wlo1: send auth to e0:ce:c3:1c:4f:b9 (try 1/3)
[   12.407335] wlo1: authenticated
[   12.408255] wlo1: associate with e0:ce:c3:1c:4f:b9 (try 1/3)
[   12.411312] wlo1: RX AssocResp from e0:ce:c3:1c:4f:b9 (capab=0x1011 status=0 aid=1)
[   12.413215] wlo1: associated
[   12.413241] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   12.414726] wlo1: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:ce:c3:1c:4f:b9
[   13.030112] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[   13.142130] logitech-hidpp-device 0003:046D:402D.0004: error in parameter
[   13.150160] logitech-hidpp-device 0003:046D:402D.0004: HID++ 2.0 device connected.
[   13.442139] input: Logitech Wireless Mouse M560 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:402D.0004/input/input18
[   21.400099] fuse init (API version 7.26)
[   89.640222] wlo1: disconnect from AP e0:ce:c3:1c:4f:b9 for new auth to e0:ce:c3:1c:4f:b8
[   89.644348] wlo1: authenticate with e0:ce:c3:1c:4f:b8
[   89.650620] wlo1: send auth to e0:ce:c3:1c:4f:b8 (try 1/3)
[   89.652702] wlo1: authenticated
[   89.653820] wlo1: associate with e0:ce:c3:1c:4f:b8 (try 1/3)
[   89.659378] wlo1: RX AssocResp from e0:ce:c3:1c:4f:b8 (capab=0x1411 status=0 aid=3)
[   89.661484] wlo1: associated



J'ai suivi scrupuleusement le tuto
J'ai fait l'installation de bumblebee avec "nouveau" cette fois et j'ai pas mieux en résultat :

optirun glxgears



[  744.710210] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[  744.710255] [ERROR]Aborting because fallback start is disabled.
 



Voilà les news

Hors ligne

#11 23-03-2017 21:18:18

èfpé
Membre
Inscription : 10-07-2016

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir,

Bumblebee semble correctement installé (cf. les entrées bbswitch dans le retour de dmesg) et le contrôleur Intel correctement piloté (cf. les occurrences de i915), toutefois le dernier message d'erreur ressemble à un vieux bogue, comme le montre une petite recherche ciblée ; installer le paquet xserver-xorg-input-mouse modifierait ce message, mais ne réglerait le problème neutral

Note : les retours des commandes citées au post #3 auraient pu être intéressants.

Dernière modification par èfpé (23-03-2017 21:28:28)

Hors ligne

#12 24-03-2017 08:45:20

robert2a
Membre
Lieu : France
Distrib. : Buster 10
Noyau : Linux 4.14.0-1 4.14.2-1
(G)UI : Mate/Gnome
Inscription : 15-11-2014

Re : Bumblebee sans Nvidia ni Nouveau

Bonjour

le retour de :


journalctl -r -p err
 



et le retour de Xorg.0.log  (sous gnome il se trouve peut etre dans ton /home/user/........  )

il y a peut etre encore un souci avec "nouveau"  sur la prise en charge de ta 950M
pour intel voir si KMS est utilisé , et désinstaller le "xserver-xorg-video-intel"

peut etre le Xorg.0.log peut te donner quelques informations sur l init des systèmes de pointages

nota :  tu peu aussi comparer entre l utilisation de "nouveau" ou de "nvidia" avec bumblebee  (si le fonctionnement est meilleur dans un des 2 cas )

Hors ligne

#13 24-03-2017 14:23:09

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonjour,

Merci pour vos réponses. J'ai déjà changer, je suis repassé avec le driver proprio de Nvidia. Depuis Otpirun fonctionne !
Mais je ne comprends pas j'ai pas de module chargé ! ni nvidia (ou nvidia-current) ni nouveau ! Et Nvidia-settings m'affirme que je n'utilise pas Nvidia ??

Je reviens vers vous ce soir, je n'ai pas mon portable sous la main !

Bonne journée

Hors ligne

#14 24-03-2017 22:17:31

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir,

Certaines choses fonctionnent mieux, mais j'avoue que je ne sais plus dans quelle direction chercher.
Il faut modifier certains paramètres dans les fichiers de conf de bumblebee peut-être ?

Merci

fab@Fab-LapTop:~$ lspci | egrep 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev ff)
 



sudo dmesg | grep firmware
[    6.466810] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2)
[    6.466837] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
[    6.466849] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2)
[    6.466870] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
[    6.466876] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2)
[    6.466897] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    6.466902] iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2)
[    6.466923] iwlwifi 0000:08:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    6.469127] iwlwifi 0000:08:00.0: firmware: direct-loading firmware iwlwifi-7265D-22.ucode
[    6.469302] iwlwifi 0000:08:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    6.496465] i915 0000:00:02.0: firmware: direct-loading firmware i915/skl_dmc_ver1_26.bin
[    6.502502] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    6.502506] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    6.525581] [drm] GuC firmware load skipped
[    6.830895] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    8.477434] r8169 0000:09:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw
 



xrandr --query
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1920x1080     60.01*+  59.93    40.01  
   1680x1050     59.95    59.88  
   1600x1024     60.17  
   1400x1050     59.98  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1360x768      59.80    59.96  
   1152x864      60.00  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   960x600       60.00  
   960x540       59.99  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   800x512       60.17  
   700x525       59.98  
   640x512       60.02  
   720x450       59.89  
   640x480       60.00    59.94  
   680x384       59.80    59.96  
   576x432       60.06  
   512x384       60.00  
   400x300       60.32    56.34  
   320x240       60.05  
HDMI-1 disconnected (normal left inverted right x axis y axis)
 




 cat /home/fab/.local/share/xorg/Xorg.0.log
[    17.598] (--) Log file renamed from "/home/fab/.local/share/xorg/Xorg.pid-1106.log" to "/home/fab/.local/share/xorg/Xorg.0.log"
[    17.598]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    17.598] X Protocol Version 11, Revision 0
[    17.598] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    17.598] Current Operating System: Linux Fab-LapTop 4.9.0-2-amd64 #1 SMP Debian 4.9.13-1 (2017-02-27) x86_64
[    17.598] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-2-amd64 root=UUID=fc01cf19-9613-48ec-818c-c426810f3b7b ro quiet
[    17.598] Build Date: 03 March 2017  03:14:41PM
[    17.598] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[    17.598] Current version of pixman: 0.34.0
[    17.598]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    17.598] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.598] (==) Log file: "/home/fab/.local/share/xorg/Xorg.0.log", Time: Fri Mar 24 21:01:36 2017
[    17.598] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    17.599] (==) No Layout section.  Using the first Screen section.
[    17.599] (==) No screen section available. Using defaults.
[    17.599] (**) |-->Screen "Default Screen Section" (0)
[    17.599] (**) |   |-->Monitor "<default monitor>"
[    17.599] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    17.599] (==) Automatically adding devices
[    17.599] (==) Automatically enabling devices
[    17.599] (==) Automatically adding GPU devices
[    17.599] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    17.599] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    17.599]  Entry deleted from font path.
[    17.599] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    17.599] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.599] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.599] (II) Loader magic: 0x55890121ce00
[    17.599] (II) Module ABI versions:
[    17.599]  X.Org ANSI C Emulation: 0.4
[    17.599]  X.Org Video Driver: 23.0
[    17.599]  X.Org XInput driver : 24.1
[    17.599]  X.Org Server Extension : 10.0
[    17.600] (++) using VT number 2

[    17.605] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    17.605] (II) xfree86: Adding drm device (/dev/dri/card0)
[    17.605] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    17.607] (--) PCI:*(0:0:2:0) 8086:191b:103c:8257 rev 6, Mem @ 0xa2000000/16777216, 0xb0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[    17.607] (II) LoadModule: "glx"
[    17.607] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.610] (II) Module glx: vendor="X.Org Foundation"
[    17.610]  compiled for 1.19.2, module version = 1.0.0
[    17.610]  ABI class: X.Org Server Extension, version 10.0
[    17.610] (==) Matched modesetting as autoconfigured driver 0
[    17.610] (==) Matched fbdev as autoconfigured driver 1
[    17.610] (==) Matched vesa as autoconfigured driver 2
[    17.610] (==) Assigned the driver to the xf86ConfigLayout
[    17.610] (II) LoadModule: "modesetting"
[    17.610] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    17.610] (II) Module modesetting: vendor="X.Org Foundation"
[    17.610]  compiled for 1.19.2, module version = 1.19.2
[    17.610]  Module class: X.Org Video Driver
[    17.610]  ABI class: X.Org Video Driver, version 23.0
[    17.610] (II) LoadModule: "fbdev"
[    17.610] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.611] (II) Module fbdev: vendor="X.Org Foundation"
[    17.611]  compiled for 1.19.0, module version = 0.4.4
[    17.611]  Module class: X.Org Video Driver
[    17.611]  ABI class: X.Org Video Driver, version 23.0
[    17.611] (II) LoadModule: "vesa"
[    17.611] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    17.611] (II) Module vesa: vendor="X.Org Foundation"
[    17.611]  compiled for 1.19.0, module version = 2.3.4
[    17.611]  Module class: X.Org Video Driver
[    17.611]  ABI class: X.Org Video Driver, version 23.0
[    17.611] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    17.611] (II) FBDEV: driver for framebuffer: fbdev
[    17.611] (II) VESA: driver for VESA chipsets: vesa
[    17.611] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    17.611] (II) modeset(0): using drv /dev/dri/card0
[    17.611] (WW) Falling back to old probe method for fbdev
[    17.611] (II) Loading sub module "fbdevhw"
[    17.611] (II) LoadModule: "fbdevhw"
[    17.611] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.612] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.612]  compiled for 1.19.2, module version = 0.0.2
[    17.612]  ABI class: X.Org Video Driver, version 23.0
[    17.612] (WW) Falling back to old probe method for vesa
[    17.612] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    17.612] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    17.612] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    17.612] (==) modeset(0): RGB weight 888
[    17.612] (==) modeset(0): Default visual is TrueColor
[    17.612] (II) Loading sub module "glamoregl"
[    17.612] (II) LoadModule: "glamoregl"
[    17.612] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    17.616] (II) Module glamoregl: vendor="X.Org Foundation"
[    17.616]  compiled for 1.19.2, module version = 1.0.0
[    17.616]  ABI class: X.Org ANSI C Emulation, version 0.4
[    17.616] (II) glamor: OpenGL accelerated X.org driver based.
[    17.625] (II) glamor: EGL version 1.4 (DRI2):
[    17.626] (II) modeset(0): glamor initialized
[    17.629] (II) modeset(0): Output eDP-1 has no monitor section
[    17.812] (II) modeset(0): Output HDMI-1 has no monitor section
[    17.815] (II) modeset(0): EDID for output eDP-1
[    17.815] (II) modeset(0): Manufacturer: BOE  Model: 679  Serial#: 0
[    17.815] (II) modeset(0): Year: 2015  Week: 1
[    17.815] (II) modeset(0): EDID Version: 1.4
[    17.815] (II) modeset(0): Digital Display Input
[    17.815] (II) modeset(0): 8 bits per channel
[    17.815] (II) modeset(0): Digital interface is DisplayPort
[    17.815] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    17.815] (II) modeset(0): Gamma: 2.20
[    17.815] (II) modeset(0): No DPMS capabilities specified
[    17.815] (II) modeset(0): Supported color encodings: RGB 4:4:4
[    17.815] (II) modeset(0): First detailed timing is preferred mode
[    17.815] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    17.815] (II) modeset(0): redX: 0.590 redY: 0.350   greenX: 0.329 greenY: 0.555
[    17.815] (II) modeset(0): blueX: 0.152 blueY: 0.118   whiteX: 0.312 whiteY: 0.328
[    17.815] (II) modeset(0): Manufacturer's mask: 0
[    17.815] (II) modeset(0): Supported detailed timing:
[    17.815] (II) modeset(0): clock: 141.4 MHz   Image Size:  344 x 194 mm
[    17.815] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2142 h_border: 0
[    17.815] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1100 v_border: 0
[    17.815] (II) modeset(0): Supported detailed timing:
[    17.815] (II) modeset(0): clock: 94.3 MHz   Image Size:  344 x 194 mm
[    17.815] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2142 h_border: 0
[    17.815] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1100 v_border: 0
[    17.815] (II) modeset(0): Unknown vendor-specific block 2
[    17.815] (II) modeset(0): EDID (in hex):
[    17.815] (II) modeset(0):   00ffffffffffff0009e5790600000000
[    17.815] (II) modeset(0):   01190104a52213780224109759548e27
[    17.815] (II) modeset(0):   1e505400000001010101010101010101
[    17.815] (II) modeset(0):   0101010101013c3780de703814403020
[    17.815] (II) modeset(0):   360058c21000001ad22480de70381440
[    17.815] (II) modeset(0):   3020360058c21000001a000000000000
[    17.815] (II) modeset(0):   00000000000000000000000000000002
[    17.815] (II) modeset(0):   00093eff0a3c6e1314226e00000000c3
[    17.815] (II) modeset(0): Printing probed modes for output eDP-1
[    17.815] (II) modeset(0): Modeline "1920x1080"x60.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[    17.815] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    17.815] (II) modeset(0): Modeline "1920x1080"x40.0   94.26  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (44.0 kHz e)
[    17.815] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    17.815] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    17.815] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    17.815] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    17.815] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    17.815] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    17.815] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    17.815] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    17.815] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    17.815] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    17.815] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    17.815] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    17.815] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    17.815] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    17.815] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    17.815] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    17.815] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    17.815] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    17.815] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    17.815] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    17.815] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    17.815] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    17.815] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    17.815] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    17.815] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    17.815] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    17.815] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    17.815] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    17.815] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    17.815] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    17.815] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    17.815] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    17.816] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    17.816] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    17.816] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    18.000] (II) modeset(0): EDID for output HDMI-1
[    18.000] (II) modeset(0): Output eDP-1 connected
[    18.000] (II) modeset(0): Output HDMI-1 disconnected
[    18.000] (II) modeset(0): Using exact sizes for initial modes
[    18.000] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    18.000] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    18.000] (==) modeset(0): DPI set to (96, 96)
[    18.000] (II) Loading sub module "fb"
[    18.000] (II) LoadModule: "fb"
[    18.000] (II) Loading /usr/lib/xorg/modules/libfb.so
[    18.001] (II) Module fb: vendor="X.Org Foundation"
[    18.001]  compiled for 1.19.2, module version = 1.0.0
[    18.001]  ABI class: X.Org ANSI C Emulation, version 0.4
[    18.001] (II) UnloadModule: "fbdev"
[    18.001] (II) Unloading fbdev
[    18.001] (II) UnloadSubModule: "fbdevhw"
[    18.001] (II) Unloading fbdevhw
[    18.001] (II) UnloadModule: "vesa"
[    18.001] (II) Unloading vesa
[    18.001] (==) Depth 24 pixmap format is 32 bpp
[    18.060] (==) modeset(0): Backing store enabled
[    18.060] (==) modeset(0): Silken mouse enabled
[    18.061] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    18.061] (==) modeset(0): DPMS enabled
[    18.061] (II) modeset(0): [DRI2] Setup complete
[    18.061] (II) modeset(0): [DRI2]   DRI driver: i965
[    18.061] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    18.061] (--) RandR disabled
[    18.064] (II) SELinux: Disabled on system
[    18.068] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    18.068] (II) AIGLX: enabled GLX_ARB_create_context
[    18.068] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    18.068] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    18.068] (II) AIGLX: enabled GLX_INTEL_swap_event
[    18.068] (II) AIGLX: enabled GLX_SGI_swap_control
[    18.068] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    18.068] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    18.068] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    18.068] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    18.068] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    18.068] (II) AIGLX: Loaded and initialized i965
[    18.068] (II) GLX: Initialized DRI2 GL provider for screen 0
[    18.070] (II) modeset(0): Damage tracking initialized
[    18.070] (II) modeset(0): Setting screen physical size to 508 x 285
[    18.096] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    18.096] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.096] (II) LoadModule: "libinput"
[    18.096] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    18.098] (II) Module libinput: vendor="X.Org Foundation"
[    18.098]  compiled for 1.19.0, module version = 0.23.0
[    18.098]  Module class: X.Org XInput Driver
[    18.098]  ABI class: X.Org XInput driver, version 24.1
[    18.098] (II) Using input driver 'libinput' for 'Power Button'
[    18.098] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
[    18.098] (**) Power Button: always reports core events
[    18.098] (**) Option "Device" "/dev/input/event5"
[    18.098] (**) Option "_source" "server/udev"
[    18.099] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    18.099] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    18.099] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    18.099] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.099] (**) Option "xkb_model" "pc105"
[    18.099] (**) Option "xkb_layout" "fr"
[    18.099] (**) Option "xkb_variant" "latin9"
[    18.110] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[    18.110] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[    18.111] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    18.111] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    18.111] (II) Using input driver 'libinput' for 'Video Bus'
[    18.111] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 24 paused 0
[    18.111] (**) Video Bus: always reports core events
[    18.111] (**) Option "Device" "/dev/input/event11"
[    18.111] (**) Option "_source" "server/udev"
[    18.112] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[    18.112] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[    18.112] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12/event11"
[    18.112] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.112] (**) Option "xkb_model" "pc105"
[    18.112] (**) Option "xkb_layout" "fr"
[    18.112] (**) Option "xkb_variant" "latin9"
[    18.112] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[    18.112] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[    18.112] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    18.112] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    18.112] (II) Using input driver 'libinput' for 'Video Bus'
[    18.113] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 25 paused 0
[    18.113] (**) Video Bus: always reports core events
[    18.113] (**) Option "Device" "/dev/input/event10"
[    18.113] (**) Option "_source" "server/udev"
[    18.113] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[    18.113] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[    18.113] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input11/event10"
[    18.113] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    18.113] (**) Option "xkb_model" "pc105"
[    18.113] (**) Option "xkb_layout" "fr"
[    18.113] (**) Option "xkb_variant" "latin9"
[    18.114] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[    18.114] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[    18.114] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    18.114] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    18.114] (II) Using input driver 'libinput' for 'Power Button'
[    18.114] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[    18.114] (**) Power Button: always reports core events
[    18.114] (**) Option "Device" "/dev/input/event4"
[    18.114] (**) Option "_source" "server/udev"
[    18.114] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    18.114] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    18.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event4"
[    18.114] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    18.114] (**) Option "xkb_model" "pc105"
[    18.114] (**) Option "xkb_layout" "fr"
[    18.114] (**) Option "xkb_variant" "latin9"
[    18.115] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    18.115] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    18.115] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    18.115] (II) No input driver specified, ignoring this device.
[    18.115] (II) This device may have been added with another device file.
[    18.115] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/event2)
[    18.115] (**) Logitech Wireless Mouse M560: Applying InputClass "libinput pointer catchall"
[    18.115] (II) Using input driver 'libinput' for 'Logitech Wireless Mouse M560'
[    18.116] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[    18.116] (**) Logitech Wireless Mouse M560: always reports core events
[    18.116] (**) Option "Device" "/dev/input/event2"
[    18.116] (**) Option "_source" "server/udev"
[    18.116] (II) input device 'Logitech Wireless Mouse M560', /dev/input/event2 is tagged by udev as: Mouse
[    18.116] (II) input device 'Logitech Wireless Mouse M560', /dev/input/event2 is a pointer caps
[    18.116] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.2/0003:046D:C52B.0003/0003:046D:402D.0004/input/input3/event2"
[    18.116] (II) XINPUT: Adding extended input device "Logitech Wireless Mouse M560" (type: MOUSE, id 10)
[    18.116] (**) Option "AccelerationScheme" "none"
[    18.116] (**) Logitech Wireless Mouse M560: (accel) selected scheme none/0
[    18.116] (**) Logitech Wireless Mouse M560: (accel) acceleration factor: 2.000
[    18.116] (**) Logitech Wireless Mouse M560: (accel) acceleration threshold: 4
[    18.116] (II) input device 'Logitech Wireless Mouse M560', /dev/input/event2 is tagged by udev as: Mouse
[    18.116] (II) input device 'Logitech Wireless Mouse M560', /dev/input/event2 is a pointer caps
[    18.117] (II) config/udev: Adding input device Logitech Wireless Mouse M560 (/dev/input/mouse1)
[    18.117] (II) No input driver specified, ignoring this device.
[    18.117] (II) This device may have been added with another device file.
[    18.117] (II) config/udev: Adding input device HP Wide Vision HD (/dev/input/event8)
[    18.117] (**) HP Wide Vision HD: Applying InputClass "libinput keyboard catchall"
[    18.117] (II) Using input driver 'libinput' for 'HP Wide Vision HD'
[    18.117] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 28 paused 0
[    18.117] (**) HP Wide Vision HD: always reports core events
[    18.117] (**) Option "Device" "/dev/input/event8"
[    18.117] (**) Option "_source" "server/udev"
[    18.117] (II) input device 'HP Wide Vision HD', /dev/input/event8 is tagged by udev as: Keyboard
[    18.117] (II) input device 'HP Wide Vision HD', /dev/input/event8 is a keyboard
[    18.117] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9/event8"
[    18.117] (II) XINPUT: Adding extended input device "HP Wide Vision HD" (type: KEYBOARD, id 11)
[    18.117] (**) Option "xkb_model" "pc105"
[    18.117] (**) Option "xkb_layout" "fr"
[    18.117] (**) Option "xkb_variant" "latin9"
[    18.118] (II) input device 'HP Wide Vision HD', /dev/input/event8 is tagged by udev as: Keyboard
[    18.118] (II) input device 'HP Wide Vision HD', /dev/input/event8 is a keyboard
[    18.118] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    18.118] (II) No input driver specified, ignoring this device.
[    18.118] (II) This device may have been added with another device file.
[    18.118] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[    18.118] (II) No input driver specified, ignoring this device.
[    18.118] (II) This device may have been added with another device file.
[    18.118] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[    18.118] (II) No input driver specified, ignoring this device.
[    18.118] (II) This device may have been added with another device file.
[    18.118] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[    18.118] (II) No input driver specified, ignoring this device.
[    18.118] (II) This device may have been added with another device file.
[    18.119] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[    18.119] (II) No input driver specified, ignoring this device.
[    18.119] (II) This device may have been added with another device file.
[    18.119] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.119] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    18.119] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    18.119] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 29 paused 0
[    18.119] (**) AT Translated Set 2 keyboard: always reports core events
[    18.119] (**) Option "Device" "/dev/input/event0"
[    18.119] (**) Option "_source" "server/udev"
[    18.119] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    18.119] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    18.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    18.119] (**) Option "xkb_model" "pc105"
[    18.119] (**) Option "xkb_layout" "fr"
[    18.119] (**) Option "xkb_variant" "latin9"
[    18.119] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    18.120] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    18.120] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    18.120] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    18.120] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    18.120] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 30 paused 0
[    18.120] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.120] (**) Option "Device" "/dev/input/event1"
[    18.120] (**) Option "_source" "server/udev"
[    18.120] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    18.120] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    18.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
[    18.120] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    18.120] (**) Option "AccelerationScheme" "none"
[    18.120] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    18.120] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    18.120] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    18.121] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    18.121] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    18.121] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    18.121] (II) No input driver specified, ignoring this device.
[    18.121] (II) This device may have been added with another device file.
[    18.121] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[    18.121] (II) No input driver specified, ignoring this device.
[    18.121] (II) This device may have been added with another device file.
[    18.121] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    18.121] (II) No input driver specified, ignoring this device.
[    18.121] (II) This device may have been added with another device file.
[    18.121] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    18.121] (II) No input driver specified, ignoring this device.
[    18.121] (II) This device may have been added with another device file.
[    18.121] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[    18.121] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    18.121] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    18.122] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 31 paused 0
[    18.122] (**) HP WMI hotkeys: always reports core events
[    18.122] (**) Option "Device" "/dev/input/event12"
[    18.122] (**) Option "_source" "server/udev"
[    18.122] (II) input device 'HP WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[    18.122] (II) input device 'HP WMI hotkeys', /dev/input/event12 is a keyboard
[    18.122] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event12"
[    18.122] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    18.122] (**) Option "xkb_model" "pc105"
[    18.122] (**) Option "xkb_layout" "fr"
[    18.122] (**) Option "xkb_variant" "latin9"
[    18.122] (II) input device 'HP WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[    18.122] (II) input device 'HP WMI hotkeys', /dev/input/event12 is a keyboard
[    18.122] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event6)
[    18.122] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[    18.122] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[    18.122] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 32 paused 0
[    18.122] (**) HP Wireless hotkeys: always reports core events
[    18.122] (**) Option "Device" "/dev/input/event6"
[    18.122] (**) Option "_source" "server/udev"
[    18.123] (II) input device 'HP Wireless hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[    18.123] (II) input device 'HP Wireless hotkeys', /dev/input/event6 is a keyboard
[    18.123] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[    18.123] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 15)
[    18.123] (**) Option "xkb_model" "pc105"
[    18.123] (**) Option "xkb_layout" "fr"
[    18.123] (**) Option "xkb_variant" "latin9"
[    18.123] (II) input device 'HP Wireless hotkeys', /dev/input/event6 is tagged by udev as: Keyboard
[    18.123] (II) input device 'HP Wireless hotkeys', /dev/input/event6 is a keyboard
[    18.518] (II) modeset(0): EDID vendor "BOE", prod id 1657
[    18.518] (II) modeset(0): Printing DDC gathered Modelines:
[    18.518] (II) modeset(0): Modeline "1920x1080"x0.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[    18.518] (II) modeset(0): Modeline "1920x1080"x0.0   94.26  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (44.0 kHz e)
[    19.756] (II) modeset(0): EDID vendor "BOE", prod id 1657
[    19.756] (II) modeset(0): Printing DDC gathered Modelines:
[    19.756] (II) modeset(0): Modeline "1920x1080"x0.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[    19.756] (II) modeset(0): Modeline "1920x1080"x0.0   94.26  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (44.0 kHz e)
[   408.655] (II) modeset(0): EDID vendor "BOE", prod id 1657
[   408.656] (II) modeset(0): Printing DDC gathered Modelines:
[   408.656] (II) modeset(0): Modeline "1920x1080"x0.0  141.40  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (66.0 kHz eP)
[   408.656] (II) modeset(0): Modeline "1920x1080"x0.0   94.26  1920 1968 2000 2142  1080 1083 1089 1100 +hsync -vsync (44.0 kHz e)
 




sudo journalctl -r -p err
-- Logs begin at Fri 2017-03-24 21:01:25 CET, end at Fri 2017-03-24 21:12:57 CET. --
mars 24 21:02:18 Fab-LapTop mysqld[846]: 2017-03-24 21:02:18 140459234706176 [Warning] Access denied for user 'phpmyadmin'@'localhost' (using password: YES)
mars 24 21:02:18 Fab-LapTop mysqld[846]: 2017-03-24 21:02:18 140459289477888 [Warning] Access denied for user 'phpmyadmin'@'localhost' (using password: YES)
mars 24 21:02:18 Fab-LapTop mysqld[846]: 2017-03-24 21:02:18 140459289477888 [Warning] Access denied for user 'phpmyadmin'@'localhost' (using password: YES)
mars 24 21:01:38 Fab-LapTop bluetoothd[483]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)
mars 24 21:01:28 Fab-LapTop mysqld[846]: Version: '10.2.4-MariaDB-10.2.4+maria~stretch-log'  socket: '/var/run/mysqld/mysqld.sock'  port: 3306  mariadb.org binary distribution
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] /usr/sbin/mysqld: ready for connections.
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] Added new Master_info '' to hash table
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] Reading of all Master_info entries succeded
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] Server socket created on IP: '127.0.0.1'.
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] Plugin 'FEEDBACK' is disabled.
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140458479056640 [Note] InnoDB: Buffer pool(s) load completed at 170324 21:01:28
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140458479056640 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: 5.7.14 started; log sequence number 1226662
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Waiting for purge to start
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: 32 non-redo rollback segment(s) are active.
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: 96 redo rollback segment(s) found. 96 redo rollback segment(s) are active.
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: File './ibtmp1' size is now 12 MB.
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ...
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Creating shared tablespace for temporary tables
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Highest supported file format is Barracuda.
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140458583873280 [Note] InnoDB: If the mysqld execution user is authorized, page cleaner thread priority can be changed. See the man page of setpriorit
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Completed initialization of buffer pool
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Initializing buffer pool, total size = 256M, instances = 1, chunk size = 128M
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Using SSE2 crc32 instructions
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Number of pools: 1
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Using Linux native AIO
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Compressed tables use zlib 1.2.8
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Uses event mutexes
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] /usr/sbin/mysqld (mysqld 10.2.4-MariaDB-10.2.4+maria~stretch-log) starting as process 846 ...
mars 24 21:01:28 Fab-LapTop mysqld[846]: 2017-03-24 21:01:28 140459290503424 [Note] options --log-slow-admin-statements, --log-queries-not-using-indexes and --log-slow-slave-statements have no effect if --log-sl
mars 24 21:01:27 Fab-LapTop kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
mars 24 21:01:27 Fab-LapTop kernel: pcieport 0000:00:1c.5:   device [8086:a115] error status/mask=00000001/00002000
mars 24 21:01:27 Fab-LapTop kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
mars 24 21:01:27 Fab-LapTop bluetoothd[483]: sap-server: Operation not permitted (1)
mars 24 21:01:27 Fab-LapTop bluetoothd[483]: Sap driver initialization failed.
mars 24 21:01:27 Fab-LapTop bluetoothd[483]: Failed to obtain handles for "Service Changed" characteristic
mars 24 21:01:27 Fab-LapTop avahi-daemon[487]: chroot.c: open() failed: No such file or directory
mars 24 21:01:27 Fab-LapTop minissdpd[480]: setsockopt(udp, IP_ADD_MEMBERSHIP)(0.0.0.0): No such device
mars 24 21:01:25 Fab-LapTop kernel: pcieport 0000:00:1c.5:    [ 0] Receiver Error         (First)
mars 24 21:01:25 Fab-LapTop kernel: pcieport 0000:00:1c.5:   device [8086:a115] error status/mask=00000001/00002000
mars 24 21:01:25 Fab-LapTop kernel: pcieport 0000:00:1c.5: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5(Receiver ID)
mars 24 21:01:25 Fab-LapTop kernel: iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-23.ucode (-2)
mars 24 21:01:25 Fab-LapTop kernel: iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-24.ucode (-2)
mars 24 21:01:25 Fab-LapTop kernel: iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-25.ucode (-2)
mars 24 21:01:25 Fab-LapTop kernel: iwlwifi 0000:08:00.0: firmware: failed to load iwlwifi-7265D-26.ucode (-2)
mars 24 21:01:25 Fab-LapTop kernel: acpi MSFT0101:00: platform device creation failed: -16
mars 24 21:01:25 Fab-LapTop kernel: platform MSFT0101:00: failed to claim resource 1
 



Bonne soirée

Hors ligne

#15 24-03-2017 23:32:32

èfpé
Membre
Inscription : 10-07-2016

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir,

Ben c'est nickel tout ça, qu'est-ce qui te chagrine ? Utiliser la carte NVIDIA n'est pas une fin en soi, et le boulot de Bumblebee est de switcher (GPU primaire → GPU secondaire) uniquement quand c'est nécessaire... que donne :

lspci -nnk | egrep -A 2 'VGA|3D'


Tu as testé avec 'optirun machin' et ça a fonctionné, donc c'est bon. Merci pour tes retours smile

Dernière modification par èfpé (24-03-2017 23:38:38)

Hors ligne

#16 25-03-2017 21:01:28

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir,

En fait, j'essaie de comprendre, je suis étonné d'avoir aucun pilote chargé

lsmod |egrep "nouveau|nvidia*"
 


ne sort rien ! Est-ce que c'est bien normal ?

lspci -nnk | egrep -A 2 'VGA|3D'
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530 [8086:191b] (rev 06)
  Subsystem: Hewlett-Packard Company HD Graphics 530 [103c:8257]
  Kernel driver in use: i915
--
01:00.0 3D controller [0302]: NVIDIA Corporation GM107M [GeForce GTX 950M] [10de:139a] (rev ff)
  Kernel modules: nvidia
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader [10ec:522a] (rev 01)
 


Merci pour ton (votre) aide

Bonne soirée

Hors ligne

#17 25-03-2017 21:19:08

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

En tout cas depuis que bumblebee est installé l'autonomie est passée de 2 ou 3 heures à plus de quatre heures. C'est plus bien ça !

Hors ligne

#18 25-03-2017 22:46:46

èfpé
Membre
Inscription : 10-07-2016

Re : Bumblebee sans Nvidia ni Nouveau

Bonsoir,

Alors le module nvidia est très vraisemblablement déchargé dès qu'il ne sert plus... d'ailleurs l'entrée 'Kernel modules: nvidia' montre qu'il reste à disposition ; nouveau a été 'blacklisté' et n'est donc plus trop dans le coup. Tu pourrais probablement voir Bumblebee à l'œuvre en lançant d'autres commandes parallèlement à 'optirun machin', par exemple :

tail -f /var/log/messages

devrait/pourrait te montrer bbswitch en pleine action

lsmod | grep nvidia


lspci -k | grep -A 3 3D

devrait/pourrait te renvoyer quelque chose du genre,

01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev ff)
        Subsystem: Hewlett-Packard Company GM107M [GeForce GTX 950M]
        Kernel driver in use: nvidia
        Kernel modules: nvidia


Quant à l'augmentation d'autonomie que tu as constatée, il est possible que d'autres éléments entrent en jeu, car si j'ai bien compris le GPU secondaire (NVIDIA) ne peut être utilisé que si Bumblebee est fonctionnel.

edit: correction de la commande lspci et de son retour suite au post #19

Quoi qu'il en soit, c'est chouette de chercher à comprendre, et tes retours pourront servir à d'autres big_smile

Dernière modification par èfpé (26-03-2017 12:52:52)

Hors ligne

#19 26-03-2017 12:00:58

flylowgofastturnleft
Membre
Distrib. : Debian jessie stable
Noyau : Linux 3.16.0-4-amd64
(G)UI : Gnome
Inscription : 20-03-2017

Re : Bumblebee sans Nvidia ni Nouveau

Bonjour, merci pour ton retour

Tu as raison sur toute la ligne ! Merci beaucoup pour tous ces éclairages, c'est très intéressant de savoir un peu mieux comment marche nos petites bêtes !
Ca doit être très intéressant de participer au développement du système. roll roll

sudo tail -f /var/log/messages



Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.666728] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.666758] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.666774] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.666789] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.666803] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.666844] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.666859] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.691069] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
Mar 26 11:50:16 Fab-LapTop kernel: [ 7675.920418] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.39  Tue Jan 31 19:41:48 PST 2017
Mar 26 11:50:27 Fab-LapTop gnome-terminal-[2655]: Allocating size to GtkScrollbar 0x55b25b066210 without calling gtk_widget_get_preferred_width/height(). How does the code know the size to allocate?
 



lsmod | grep nvidia



nvidia_modeset        790528  1
nvidia              12144640  39 nvidia_modeset
 



lspci -k | grep -A 2 3D



01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 950M] (rev a2)
  Subsystem: Hewlett-Packard Company GM107M [GeForce GTX 950M]
  Kernel driver in use: nvidia
 



Bonne fin de Week-end cool

Dernière modification par flylowgofastturnleft (26-03-2017 12:02:35)

Hors ligne

Pied de page des forums