logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 30-03-2017 00:36:09

M. Burns
Membre
Distrib. : DFLinux (Debian 8.7 ?)
Noyau : Linux 3.16.0-4-amd64
(G)UI : Xfce - xfwm4
Inscription : 29-03-2017

[Résolu] Graver un DVD (problème matériel ou logiciel ?)

Bonjour,

Sur un ordinateur portable avec une installation toute fraîche de DFLinux, il semble impossible de graver un DVD (pour un fichier texte, seul le label du disque et le nom du fichier apparaissent ; le fichier reste vide). Le problème de gravure m'a été signalé par les propriétaires de cet ordinateur, lorsque ce dernier était encore sous Ubuntu (il avait bien d'autres problèmes).

Avant de venir sur le forum, je suis passé par IRC. J'ai testé avec 2 DVD-RW via Xfburn (les propriétaires ont essayé avec plusieurs CD-R.

Avec le lecteur graveur vide, voici ce que j'obtiens avec la commande ci-dessous :

~$ lsblk


NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 232,9G 0 disk
├─sda1 8:1 0 23,3G 0 part /
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 204G 0 part /home
└─sda6 8:6 0 5,7G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom



J'ai aussi tenté de graver en ligne de commande avec Wodim (voir les 3 commandes) :

~$ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.




~$ wodim -scanbus
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.




~$ wodim dev=help
Supported SCSI transports for this platform:

Transport name:   sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example:   1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported

Transport name:   ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example:   ATAPI:1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported

Transport name:   ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example:   1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported

Transport name:   RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example:   REMOTE:rscsi@host:1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported
 



Ceci, sera peut-être également utile :

~$ cat /etc/mtab
rootfs / rootfs rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,relatime,size=10240k,nr_inodes=383955,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,relatime,size=618492k,mode=755 0 0
/dev/sda1 / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
tmpfs /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
tmpfs /etc/machine-id tmpfs ro,relatime,size=618492k,mode=755 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=22,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
/dev/sda5 /home xfs rw,relatime,attr2,inode64,noquota 0 0
tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=309248k,mode=700,uid=1000,gid=1000 0 0
gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0



Enfin, je précise que le lecteur a été utilisé pour l'installation de DFLinux, sans problème (le LiveDVD a cependant été gravé avec xfburn depuis mon PC personnel).

Avec votre aide, j'espère pouvoir :
- soit résoudre le problème
- soit savoir avec certitude que le graveur est mort ou inutilisable et leur conseiller d'aller acheter un graveur externe si c'est vraiment utile.

Merci d'avance pour l'attention que vous porterez à mon problème !

EDIT : J'ajoute fstab :

~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=eb837c5b-b7a1-4df8-8c51-d93e93284fd9 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=e5532a7d-79f2-48dd-a3bc-8a4a9b50e6ea /home           xfs     defaults        0       2
# swap was on /dev/sda6 during installation
UUID=fa98d4a9-7200-4d3c-8493-fabb8e2ee2c5 none            swap    sw              0       0
/dev/sr0        /media/cdrom0   udf,iso9660 user,noauto     0       0
 



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Edit à toto :

Utilisation correcte des balises en exemple visible par Modifier au bas du post :

lsblk


NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 232,9G 0 disk
├─sda1 8:1 0 23,3G 0 part /
├─sda2 8:2 0 1K 0 part
├─sda5 8:5 0 204G 0 part /home
└─sda6 8:6 0 5,7G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom



wodim --devices


wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.



wodim -scanbus


wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.



wodim dev=help


Supported SCSI transports for this platform:

Transport name:   sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example:   1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported

Transport name:   ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example:   ATAPI:1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported

Transport name:   ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example:   1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported

Transport name:   RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example:   REMOTE:rscsi@host:1,2,0
SCSI Bus scanning:  supported
Open via UNIX device: not supported



cat /etc/mtab


rootfs / rootfs rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,relatime,size=10240k,nr_inodes=383955,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /run tmpfs rw,nosuid,relatime,size=618492k,mode=755 0 0
/dev/sda1 / ext4 rw,relatime,errors=remount-ro,data=ordered 0 0
securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
tmpfs /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0
tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0
cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd 0 0
pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0
cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0
cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0
cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0
cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0
cgroup /sys/fs/cgroup/net_cls,net_prio cgroup rw,nosuid,nodev,noexec,relatime,net_cls,net_prio 0 0
cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0
cgroup /sys/fs/cgroup/perf_event cgroup rw,nosuid,nodev,noexec,relatime,perf_event 0 0
tmpfs /etc/machine-id tmpfs ro,relatime,size=618492k,mode=755 0 0
systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=22,pgrp=1,timeout=300,minproto=5,maxproto=5,direct 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0
mqueue /dev/mqueue mqueue rw,relatime 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
/dev/sda5 /home xfs rw,relatime,attr2,inode64,noquota 0 0
tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=309248k,mode=700,uid=1000,gid=1000 0 0
gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0




cat /etc/fstab


# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=eb837c5b-b7a1-4df8-8c51-d93e93284fd9 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=e5532a7d-79f2-48dd-a3bc-8a4a9b50e6ea /home           xfs     defaults        0       2
# swap was on /dev/sda6 during installation
UUID=fa98d4a9-7200-4d3c-8493-fabb8e2ee2c5 none            swap    sw              0       0
/dev/sr0        /media/cdrom0   udf,iso9660 user,noauto     0       0
 

Dernière modification par M. Burns (30-03-2017 18:06:24)

Hors ligne

#2 30-03-2017 06:51:46

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Bonjour,
Quelle est la marque du PC et quel modèle ?
Même question pour le graveur.
J'ai vu des fils où un graveur était mieux pris en charge par une version plus récente du noyau que celle de Jessie.

Hors ligne

#3 30-03-2017 07:49:46

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

M. X a écrit :

a été signalé par les propriétaires de cet ordinateur, lorsque ce dernier était encore sous Ubuntu (il avait bien d'autres problèmes)

avec la marque du Pc, version d'Ubuntu, du moins son année?

ce qui m'a intrigué aussi, mais j'y connais pas beaucoup en montage automatique, c'est que son lecteur n'apparaît pas, même un fois ouvert via l'explorateur

cat /etc/mtab | grep sr0


retourne rien


[mode aéré]

Hors ligne

#4 30-03-2017 08:09:06

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Bonjour kyodev smile
Mon graveur fonctionne mais je n'ai pas de retour pour la commande

cat /etc/mtab | grep sr0


Je précise que le graveur ne contient pas de CD ou DVD ?

Hors ligne

#5 30-03-2017 08:33:49

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

je passe, j'ai même pas un graveur pour tester :/

[mode aéré]

Hors ligne

#6 30-03-2017 11:18:58

M. Burns
Membre
Distrib. : DFLinux (Debian 8.7 ?)
Noyau : Linux 3.16.0-4-amd64
(G)UI : Xfce - xfwm4
Inscription : 29-03-2017

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Re !

PC : ASUS X70S (voire X70SE-7S090C)
Lecteur/graveur : 3M-MATSHITADVD-RAM UJ-860S (vu dans le BIOS)

Version d'Ubuntu : me souviens plus du tout ! :s

Hors ligne

#7 30-03-2017 11:23:52

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

a vue de pif, c'est ancien avant 2009 environ

[mode aéré]

Hors ligne

#8 30-03-2017 12:10:47

M. Burns
Membre
Distrib. : DFLinux (Debian 8.7 ?)
Noyau : Linux 3.16.0-4-amd64
(G)UI : Xfce - xfwm4
Inscription : 29-03-2017

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

C'est fort possible... Besoin de connaître le reste du matériel pour aider à dater ?

Hors ligne

#9 30-03-2017 12:16:27

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

non, de mémoire en 2008/2009, les asus étaient labellisés x72
donc pas certain d'un problème de noyau.

[mode aéré]

Hors ligne

#10 30-03-2017 12:47:12

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Est ce que tu vois le graveur dans thunar ?
En lançant xfburn dans un terminal pour une gravure, il y a des messages d'erreurs ?

Hors ligne

#11 30-03-2017 13:08:49

M. Burns
Membre
Distrib. : DFLinux (Debian 8.7 ?)
Noyau : Linux 3.16.0-4-amd64
(G)UI : Xfce - xfwm4
Inscription : 29-03-2017

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

chalu a écrit :

Est ce que tu vois le graveur dans thunar ?


Si je mets un disque, je vois son label sur le bureau et dans Thunar (et l'éjection fonctionne).

chalu a écrit :

En lançant xfburn dans un terminal pour une gravure, il y a des messages d'erreurs ?


roll Oups, j'ai oublié d'indiquer le message d'erreur d'Xfburn !
En graphique :

Échec: SCSI error on write(32,2: [5 24 00] Illegal request. Invalid field in cdb.


Via le terminal :


~$ xfburn
** Message: Using UDEV
** Message: Using Transcodeur GStreamer transcoder.

** (xfburn:2900): WARNING **: [FATAL] 131357: SCSI error on write(32,2): [5 24 00] Illegal request. Invalid field in cdb. (0)
 


L'erreur apparaît au bout d'un long moment.

Dernière modification par M. Burns (30-03-2017 13:29:56)

Hors ligne

#12 30-03-2017 13:49:45

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Je testerais à ta place
- avec une autre marque de CD/DVD de qualité pour écarter le problème lié à un mauvais support avec une petite vitesse.
- un autre logiciel de gravure
mais tu as peut-être déjà fait tout ça.
si ça ne donne rien ...
Edit : un fil non résolu https://debian-facile.org/viewtopic.php?id=9903 avec le même type de message montre qu'un autre logiciel peut être concluant.

Hors ligne

#13 30-03-2017 14:10:40

M. Burns
Membre
Distrib. : DFLinux (Debian 8.7 ?)
Noyau : Linux 3.16.0-4-amd64
(G)UI : Xfce - xfwm4
Inscription : 29-03-2017

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Les propriétaires ont essayé avec plusieurs CD-R de marque Sony, moi avec 2 DVD-RW de marque Verbatim.

Je voulais essayer avec Wodim (car Brasero semble basé dessus et ça m'évite d'installer tous les paquets liés avant de me rendre compte que ça ne fonctionne pas), mais comme indiqué dans mon premier message, je bloque bien plus en amont ! hmm
De plus, il me semble que Brasero est le graveur par défaut d'Ubuntu, donc il y a peu de chance que ça fonctionne (vu que les propriétaires ont dû se rendre compte du problème avec celui-ci)... Mais peut-être pour avoir des messages d'erreur différents ?

EDIT : Bon, finalement, j'ai installé les 14 paquets pour être sûr.

brasero
brasero-cdrkit
brasero-common
cdrdao
dvdauthor
libbrasero-media3-1
libexempi3
libgmime-2.6-0
libgpgme11
libiptcdata0
libmediaart-1.0-0
libperl4-corelibs-perl
libtotem-plparser18
libtracker-sparql-1.0-0

+ wodim (que j'ai déjà installé précédemment)


Je teste bientôt.

EDIT 2 : Finalement, j'étais pessimiste, ça fonctionne avec Brasero (avec plein de Warnings tout du long).

~$ brasero

** (brasero:7059): WARNING **: Could not establish a connection to Tracker: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Tracker1 was not provided by any .service files

(brasero:7059): GLib-GObject-WARNING **: attempting to add an interface (EggTreeMultiDragSource) to class (GtkFileSystemModel) after class_init

(brasero:7059): GLib-GObject-WARNING **: attempting to add an interface (EggTreeMultiDragSource) to class (GtkFileSystemModel) after class_init
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.

** (brasero:7059): WARNING **: Failed to inhibit the system from suspending: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
brasero (libisofs)DEBUG : Creating low level ECMA-119 tree...
brasero (libisofs)DEBUG : Matching hardlinks...
brasero (libisofs)DEBUG : Sorting the low level tree...
brasero (libisofs)DEBUG : Mangling names...
brasero (libisofs)DEBUG : Creating low level Joliet tree...
brasero (libisofs)DEBUG : Sorting the Joliet tree...
brasero (libisofs)DEBUG : Mangling Joliet names...
brasero (libisofs)DEBUG : Computing position of dir structure
brasero (libisofs)DEBUG : Computing length of pathlist
brasero (libisofs)DEBUG : Computing position of Joliet dir structure
brasero (libisofs)DEBUG : Computing length of Joliet pathlist
brasero (libisofs)DEBUG : Starting image writing...
brasero (libisofs)DEBUG : Processed 32 of 70 KB (45 %)
brasero (libisofs)DEBUG : Write volume descriptors
brasero (libisofs)DEBUG : Write Primary Volume Descriptor
brasero (libisofs)DEBUG : Write SVD for Joliet
brasero (libisofs)DEBUG : Processed 36 of 70 KB (51 %)
brasero (libisofs)DEBUG : Processed 40 of 70 KB (57 %)
brasero (libisofs)DEBUG : Writing ISO Path tables
brasero (libisofs)DEBUG : Processed 44 of 70 KB (62 %)
brasero (libisofs)DEBUG : Processed 48 of 70 KB (68 %)
brasero (libisofs)DEBUG : Writing Joliet Path tables
brasero (libisofs)DEBUG : Processed 52 of 70 KB (74 %)
brasero (libisofs)DEBUG : Processed 56 of 70 KB (80 %)
brasero (libisofs)DEBUG : Processed 60 of 70 KB (85 %)
brasero (libisofs)DEBUG : Processed 64 of 70 KB (91 %)
brasero (libisofs)DEBUG : Writing Files...
brasero (libisofs)DEBUG : Processed 68 of 70 KB (97 %)

** (brasero:7059): WARNING **: Failed to restore the system power manager: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files



Problème plutôt résolu (car la gravure est maintenant possible), je change le titre en ajoutant [Résolu] ? hmm

EDIT 3 : Pas super user-friendly... Lorsque j'insère un disque, il me demande si je souhaite "ignorer", "graver un cd de données" ou "graver un cd audio". Ayant désinstallé Xfburn, rien ne se lance si je clique sur "graver un cd de données". Comment faire le lien avec Brasero ?

Dernière modification par M. Burns (30-03-2017 15:29:27)

Hors ligne

#14 30-03-2017 17:30:24

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Tu vas (avec whiskermenu chez moi, je ne sais plus ce que c'est sur DFlinux) dans le menu paramètres > Disques amovibles et medias
dans l'onglet stockage, il doit falloir remplacer xfburn par brasero
1490891347.png

Et sinon oui, il faut passer en résolu en suivant éditant le premier message, toutes les explications ici :
Voir le tuto : C'est résolu ! Bravo mais il faut l'indiquer dans l'titre.

Hors ligne

#15 30-03-2017 17:50:56

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

sur DFLinux, il est possible d'installer whiskerMenu (je le conseille et peut cohabiter avec de DF menu)

[mode aéré]

Hors ligne

#16 30-03-2017 18:04:27

M. Burns
Membre
Distrib. : DFLinux (Debian 8.7 ?)
Noyau : Linux 3.16.0-4-amd64
(G)UI : Xfce - xfwm4
Inscription : 29-03-2017

Re : [Résolu] Graver un DVD (problème matériel ou logiciel ?)

Oui, j'ai ajouté le menu Whisker et j'ai laissé le HandyMenu pour leur permettre de suivre les tutos plus facilement. wink
Merci chalu, j'avais regardé dans Applications Favorites... roll

Pas de problème pour savoir comment ajouter [Résolu], c'était plutôt par rapport au fait que xfburn conserve le problème... C'est une solution détournée. Mais ok, je modifie le titre.

Hors ligne

Pied de page des forums