logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 14-04-2017 15:48:13

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

[RESOLU] impossible de se connecter en wifi

Hello, je viens de changer d'ordi pour remettre ma debian Librazik basée sur debian 8. Pendant l'installation la clef usb wifi est reconnue et internet fonctionne.
Une fois l'installation faite la clef scanne ma box, je rentre la clef de sécurité en la visualisant et là ça tourne dans le vide (???). Cette clef a toujours fonctionné automatiquement même avec des distribution comme slitaz et consor. Elle a fonctionné sur cette ordi avec mint et librazik en virtualbox.

Du coup un petit tour du côté de synaptic et là impossible d'accéder au dépôt main et non-free (???)

lsusb


Bus 002 Device 004: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 002 Device 003: ID 0603:00f2 Novatek Microelectronics Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 06f8:e010 Guillemot Corp. HWGUSB2-54-LB
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@LibraZiK-studio-audio:/home/nicolasmao2#
 



ma clef:  Guillemot Corp. HWGUSB2-54-LB

son socket d'après ubuntu:
https://debian-facile.org/images/file-R … 00c1026f09


Synaptic:
https://debian-facile.org/images/file-R … cab71fbd1d
https://debian-facile.org/images/file-R … 16e3fe13e8
https://debian-facile.org/images/file-R … 7a97f2a8b1

lsmod


root@LibraZiK-studio-audio:/home/nicolasmao2# lsmod
Module                  Size  Used by
nls_ascii              16384  0
nls_cp437              20480  0
vfat                   20480  0
fat                    69632  1 vfat
ctr                    16384  2
ccm                    20480  1
snd_hrtimer            16384  1
snd_seq                65536  1
snd_seq_device         16384  1 snd_seq
cpufreq_conservative    16384  0
cpufreq_userspace      16384  0
cpufreq_powersave      16384  0
binfmt_misc            20480  1
arc4                   16384  2
rt73usb                36864  0
rt2x00usb              24576  1 rt73usb
rt2x00lib              53248  2 rt73usb,rt2x00usb
mac80211              671744  2 rt2x00lib,rt2x00usb
cfg80211              598016  2 rt2x00lib,mac80211
intel_rapl             20480  0
rfkill                 24576  3 cfg80211
x86_pkg_temp_thermal    16384  0
crc_itu_t              16384  1 rt73usb
intel_powerclamp       16384  0
coretemp               16384  0
kvm_intel             192512  0
kvm                   589824  1 kvm_intel
snd_hda_codec_hdmi     49152  1
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
snd_hda_codec_realtek    90112  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
snd_hda_intel          36864  0
intel_cstate           16384  0
intel_uncore          122880  0
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
iTCO_wdt               16384  0
iTCO_vendor_support    16384  1 iTCO_wdt
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep              16384  1 snd_hda_codec
intel_rapl_perf        16384  0
snd_pcm               110592  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
evdev                  24576  19
snd_timer              32768  3 snd_seq,snd_hrtimer,snd_pcm
dcdbas                 16384  0
snd                    86016  11 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
soundcore              16384  1 snd
shpchp                 36864  0
i915                 1241088  3
sg                     32768  0
drm_kms_helper        155648  1 i915
drm                   360448  4 i915,drm_kms_helper
lpc_ich                24576  0
mfd_core               16384  1 lpc_ich
serio_raw              16384  0
tpm_tis                16384  0
tpm_tis_core           20480  1 tpm_tis
video                  40960  1 i915
i2c_algo_bit           16384  1 i915
tpm                    45056  2 tpm_tis,tpm_tis_core
mei_me                 36864  0
mei                   102400  1 mei_me
i2c_i801               24576  0
i2c_smbus              16384  1 i2c_i801
button                 16384  1 i915
fuse                   98304  1
parport_pc             28672  1
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,parport_pc,ppdev
autofs4                40960  2
uas                    24576  0
usb_storage            73728  1 uas
ext4                  593920  1
crc16                  16384  1 ext4
jbd2                  106496  1 ext4
fscrypto               28672  1 ext4
mbcache                16384  2 ext4
btrfs                1056768  0
xor                    24576  1 btrfs
hid_generic            16384  0
usbhid                 53248  0
hid                   118784  2 hid_generic,usbhid
raid6_pq              110592  1 btrfs
dm_mod                118784  0
sr_mod                 24576  0
sd_mod                 49152  3
cdrom                  61440  1 sr_mod
crc32c_intel           24576  1
aesni_intel           167936  3
aes_x86_64             20480  1 aesni_intel
glue_helper            16384  1 aesni_intel
lrw                    16384  1 aesni_intel
gf128mul               16384  1 lrw
ablk_helper            16384  1 aesni_intel
psmouse               135168  0
cryptd                 24576  3 ablk_helper,ghash_clmulni_intel,aesni_intel
ahci                   36864  2
libahci                32768  1 ahci
libata                249856  2 ahci,libahci
ehci_pci               16384  0
ehci_hcd               81920  1 ehci_pci
usbcore               249856  7 usbhid,rt73usb,usb_storage,rt2x00usb,ehci_hcd,uas,ehci_pci
e1000e                245760  0
scsi_mod              225280  6 sd_mod,usb_storage,libata,uas,sr_mod,sg
usb_common             16384  1 usbcore
ptp                    20480  1 e1000e
pps_core               16384  1 ptp
fjes                   28672  0
root@LibraZiK-studio-audio:/home/nicolasmao2#



lscpu


Architecture :        x86_64
Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit
Boutisme :            Little Endian
Processeur(s) :       4
Liste de processeur(s) en ligne : 0-3
Thread(s) par cœur : 1
Cœur(s) par socket : 4
Socket(s) :           1
Nœud(s) NUMA :       1
Identifiant constructeur : GenuineIntel
Famille de processeur : 6
Modèle :             42
Nom de modèle :      Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz
Révision :           7
Vitesse du processeur en MHz : 1707.611
Vitesse maximale du processeur en MHz : 3400,0000
Vitesse minimale du processeur en MHz : 1600,0000
BogoMIPS :            6187.05
Virtualisation :      VT-x
Cache L1d :           32K
Cache L1i :           32K
Cache L2 :            256K
Cache L3 :            6144K
Nœud NUMA 0 de processeur(s) : 0-3
root@LibraZiK-studio-audio:/home/nicolasmao2#



dmesg




[    0.362297] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.362298] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.362299] pci 0000:00:1e.0:   bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
[    0.362300] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.362724] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.362767] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.362808] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.362848] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.362888] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.362928] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.362968] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.363007] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.363068] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.363182] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.363183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.363184] vgaarb: loaded
[    0.363185] vgaarb: bridge control possible 0000:00:02.0
[    0.363242] PCI: Using ACPI for IRQ routing
[    0.364664] PCI: pci_cache_line_size set to 64 bytes
[    0.364696] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[    0.364697] e820: reserve RAM buffer [mem 0xca9fa000-0xcbffffff]
[    0.364698] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[    0.364699] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.364700] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[    0.364827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.364830] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.366851] clocksource: Switched to clocksource hpet
[    0.371824] VFS: Disk quotas dquot_6.6.0
[    0.371854] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.371926] pnp: PnP ACPI init
[    0.372053] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.372055] system 00:00: [io  0xffff] has been reserved
[    0.372056] system 00:00: [io  0xffff] has been reserved
[    0.372057] system 00:00: [io  0xffff] has been reserved
[    0.372058] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.372059] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.372060] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.372061] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.372064] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372087] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.372125] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.372127] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.372204] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.372386] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.372540] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.372541] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.372542] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.372543] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.372544] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.372545] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.372546] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.372547] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.372549] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.372550] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.372551] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372586] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.372587] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[    0.372588] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.372669] pnp: PnP ACPI: found 7 devices
[    0.378667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.378703] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.378720] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.378723] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.378729] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
[    0.378733] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.378741] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.378751] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.378752] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.378753] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.378754] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.378754] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.378756] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.378757] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
[    0.378757] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.378758] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.378759] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.378760] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.378761] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.378762] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.378839] NET: Registered protocol family 2
[    0.379003] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.379057] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.379121] TCP: Hash tables configured (established 32768 bind 32768)
[    0.379137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.379147] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.379201] NET: Registered protocol family 1
[    0.379218] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.379538] PCI: CLS 64 bytes, default 64
[    0.379574] Unpacking initramfs...
[    0.675880] Freeing initrd memory: 21900K (ffff88e43552a000 - ffff88e436a8d000)
[    0.675983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.675985] software IO TLB [mem 0xc69fa000-0xca9fa000] (64MB) mapped at [ffff88e4c69fa000-ffff88e4ca9f9fff]
[    0.676389] audit: initializing netlink subsys (disabled)
[    0.676404] audit: type=2000 audit(1492176768.680:1): initialized
[    0.676645] Initialise system trusted keyrings
[    0.676729] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.676760] zbud: loaded
[    0.714889] Key type asymmetric registered
[    0.714890] Asymmetric key parser 'x509' registered
[    0.714904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.714925] io scheduler noop registered
[    0.714926] io scheduler deadline registered
[    0.714936] io scheduler cfq registered (default)
[    0.715291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.715294] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.715303] intel_idle: MWAIT substates: 0x1120
[    0.715304] intel_idle: v0.4.1 model 0x2A
[    0.715414] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.715570] GHES: HEST is not enabled!
[    0.715612] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.736116] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.736543] Linux agpgart interface v0.103
[    0.736575] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.736575] AMD IOMMUv2 functionality not available on this system
[    0.736906] i8042: PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
[    0.736906] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.739743] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.739745] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.739900] mousedev: PS/2 mouse device common for all mice
[    0.739934] rtc_cmos 00:01: RTC can wake from S4
[    0.740054] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.740123] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.740132] intel_pstate: Intel P-state driver initializing
[    0.740310] ledtrig-cpu: registered to indicate activity on CPUs
[    0.741138] NET: Registered protocol family 10
[    0.741477] mip6: Mobile IPv6
[    0.741480] NET: Registered protocol family 17
[    0.741482] mpls_gso: MPLS GSO support
[    0.741750] microcode: sig=0x206a7, pf=0x2, revision=0x29
[    0.741837] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.742032] registered taskstats version 1
[    0.742034] Loading compiled-in X.509 certificates
[    0.744270] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.744739] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.744766] zswap: loaded using pool lzo/zbud
[    0.745163] rtc_cmos 00:01: setting system clock to 2017-04-14 13:32:48 UTC (1492176768)
[    0.745246] PM: Hibernation image not present or could not be loaded.
[    0.747184] Freeing unused kernel memory: 1396K (ffffffffbd52d000 - ffffffffbd68a000)
[    0.747185] Write protecting the kernel read-only data: 12288k
[    0.747984] Freeing unused kernel memory: 2032K (ffff88e43be04000 - ffff88e43c000000)
[    0.752505] Freeing unused kernel memory: 1244K (ffff88e43c2c9000 - ffff88e43c400000)
[    0.762929] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.776608] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.776698] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.776711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.777580] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.777626] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779104] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779126] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779188] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779553] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779631] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.803209] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    0.812269] pps_core: LinuxPPS API ver. 1 registered
[    0.812270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.813082] PTP clock support registered
[    0.818365] SCSI subsystem initialized
[    0.818467] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.818468] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.818680] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.819684] ACPI: bus type USB registered
[    0.819705] usbcore: registered new interface driver usbfs
[    0.819715] usbcore: registered new interface driver hub
[    0.819738] usbcore: registered new device driver usb
[    0.821625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.822223] ehci-pci: EHCI PCI platform driver
[    0.829659] libata version 3.00 loaded.
[    0.842259] AVX version of gcm_enc/dec engaged.
[    0.842260] AES CTR mode by8 optimization enabled
[    0.963272] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.084907] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:dc:f6:7c
[    1.084909] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.084950] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
[    1.085178] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.085184] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.085196] ehci-pci 0000:00:1a.0: debug port 2
[    1.086579] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.089088] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.089262] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000
[    1.102918] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.102978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.102979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.102981] usb usb1: Product: EHCI Host Controller
[    1.102982] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.102983] usb usb1: SerialNumber: 0000:00:1a.0
[    1.103233] hub 1-0:1.0: USB hub found
[    1.103242] hub 1-0:1.0: 2 ports detected
[    1.103499] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.103504] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.103516] ehci-pci 0000:00:1d.0: debug port 2
[    1.107429] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.107493] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000
[    1.122915] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.123288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.123291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.123293] usb usb2: Product: EHCI Host Controller
[    1.123295] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.123296] usb usb2: SerialNumber: 0000:00:1d.0
[    1.123622] hub 2-0:1.0: USB hub found
[    1.123664] hub 2-0:1.0: 2 ports detected
[    1.124067] ahci 0000:00:1f.2: version 3.0
[    1.124286] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.124288] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.135709] scsi host0: ahci
[    1.136013] scsi host1: ahci
[    1.136277] scsi host2: ahci
[    1.136396] scsi host3: ahci
[    1.136500] scsi host4: ahci
[    1.136591] scsi host5: ahci
[    1.136642] ata1: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40100 irq 27
[    1.136644] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 27
[    1.136645] ata3: DUMMY
[    1.136646] ata4: DUMMY
[    1.136646] ata5: DUMMY
[    1.136647] ata6: DUMMY
[    1.430903] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.449956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.449978] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.450590] ata2.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D200, max UDMA/100
[    1.450593] ata2.00: applying bridge limits
[    1.450895] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.451555] ata2.00: configured for UDMA/100
[    1.451693] ata1.00: ATA-8: WDC WD5000AAKX-753CA1, 19.01H19, max UDMA/133
[    1.451695] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.454463] ata1.00: configured for UDMA/133
[    1.454850] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-7 1H19 PQ: 0 ANSI: 5
[    1.504191] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW SH-216AB D200 PQ: 0 ANSI: 5
[    1.524405] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.524455] sd 0:0:0:0: [sda] Write Protect is off
[    1.524458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.524480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.537333] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.537335] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.537566] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.540508]  sda: sda1 sda2 < sda5 sda6 >
[    1.541401] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.583269] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.583272] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.583647] hub 1-1:1.0: USB hub found
[    1.583864] hub 1-1:1.0: 6 ports detected
[    1.603255] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.603257] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.603501] hub 2-1:1.0: USB hub found
[    1.603584] hub 2-1:1.0: 8 ports detected
[    1.686932] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.686940] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns
[    1.788401] random: fast init done
[    1.874863] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.890890] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[    1.891844] device-mapper: uevent: version 1.0.3
[    1.891955] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.966860] raid6: sse2x1   gen()  5918 MB/s
[    2.004852] usb 2-1.6: New USB device found, idVendor=0603, idProduct=00f2
[    2.004853] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.004854] usb 2-1.6: Product: USB Keyboard
[    2.004855] usb 2-1.6: Manufacturer: NOVATEK
[    2.009033] hidraw: raw HID events driver (C) Jiri Kosina
[    2.016211] usbcore: registered new interface driver usbhid
[    2.016212] usbhid: USB HID core driver
[    2.017577] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0603:00F2.0001/input/input3
[    2.034855] raid6: sse2x1   xor()  6080 MB/s
[    2.075052] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[    2.076765] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0603:00F2.0002/input/input4
[    2.082864] usb 2-1.7: new low-speed USB device number 4 using ehci-pci
[    2.102852] raid6: sse2x2   gen() 11059 MB/s
[    2.122472] usb 1-1.4: New USB device found, idVendor=06f8, idProduct=e010
[    2.122473] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.122474] usb 1-1.4: Product: 802.11 bg WLAN
[    2.122475] usb 1-1.4: Manufacturer: Ralink
[    2.135130] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[    2.170861] raid6: sse2x2   xor()  8025 MB/s
[    2.196597] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c03e
[    2.196599] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.196600] usb 2-1.7: Product: USB-PS/2 Optical Mouse
[    2.196600] usb 2-1.7: Manufacturer: Logitech
[    2.199994] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C03E.0003/input/input5
[    2.200149] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[    2.238854] raid6: sse2x4   gen() 12911 MB/s
[    2.278864] usb 2-1.8: new high-speed USB device number 5 using ehci-pci
[    2.306851] raid6: sse2x4   xor()  9939 MB/s
[    2.306852] raid6: using algorithm sse2x4 gen() 12911 MB/s
[    2.306852] raid6: .... xor() 9939 MB/s, rmw enabled
[    2.306853] raid6: using ssse3x2 recovery algorithm
[    2.307965] xor: automatically using best checksumming function   avx      
[    2.328854] Btrfs loaded, crc32c=crc32c-intel
[    2.386875] PM: Starting manual resume from disk
[    2.386889] PM: Hibernation image partition 8:5 present
[    2.386890] PM: Looking for hibernation image.
[    2.387152] PM: Image not found (code -22)
[    2.387153] PM: Hibernation image not present or could not be loaded.
[    2.441027] usb 2-1.8: New USB device found, idVendor=0951, idProduct=1666
[    2.441037] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.441039] usb 2-1.8: Product: DataTraveler 3.0
[    2.441040] usb 2-1.8: Manufacturer: Kingston
[    2.441041] usb 2-1.8: SerialNumber: 08606E6D4080BE90270D94D5
[    2.446573] usb-storage 2-1.8:1.0: USB Mass Storage device detected
[    2.446682] scsi host6: usb-storage 2-1.8:1.0
[    2.446761] usbcore: registered new interface driver usb-storage
[    2.447894] usbcore: registered new interface driver uas
[    2.513646] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.711033] clocksource: Switched to clocksource tsc
[    3.506692] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    3.580410] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    3.638024] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.638229] systemd[1]: Detected architecture x86-64.
[    3.649336] systemd[1]: Set hostname to <LibraZiK-studio-audio>.
[    3.974738] sd 6:0:0:0: [sdb] 61472768 512-byte logical blocks: (31.5 GB/29.3 GiB)
[    3.977059] sd 6:0:0:0: [sdb] Write Protect is off
[    3.977062] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.979292] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.979344] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    4.093948]  sdb: sdb1 sdb4
[    4.100573] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.432315] random: crng init done
[    4.477106] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.477202] systemd[1]: Listening on udev Control Socket.
[    4.477244] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.477366] systemd[1]: Created slice System Slice.
[    4.477417] systemd[1]: Listening on Journal Socket.
[    4.524902] systemd[1]: Starting Load Kernel Modules...
[    4.524934] systemd[1]: Reached target Remote File Systems (Pre).
[    5.033600] lp: driver loaded but no devices found
[    5.126244] ppdev: user-space parallel port driver
[    5.154100] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    5.287035] parport0: irq 7 detected
[    5.383064] lp0: using parport0 (polling).
[    5.473897] fuse init (API version 7.26)
[    7.369416] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.408458] systemd-journald[723]: Received request to flush runtime journal from PID 1
[    7.611510] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    7.611514] ACPI: Power Button [PWRB]
[    7.611548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    7.611549] ACPI: Power Button [PWRF]
[    7.629771] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    7.743165] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.743170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743172] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.743174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743175] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.743177] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743177] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.743179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743179] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.782325] [drm] Initialized
[    7.815185] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.815209] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    7.815232] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.869400] [drm] Memory usable by graphics device = 2048M
[    7.869401] [drm] Replacing VGA console driver
[    7.869902] Console: switching to colour dummy device 80x25
[    7.877128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.877129] [drm] Driver supports precise vblank timestamp query.
[    7.879760] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.883520] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.883724] acpi device:01: registered as cooling_device4
[    7.883795] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    7.883821] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    7.883843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.909827] fbcon: inteldrmfb (fb0) is primary device
[    7.953327] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.975972] Console: switching to colour frame buffer device 160x64
[    7.996129] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.099709] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    8.099711] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    8.099712] RAPL PMU: hw unit of domain package 2^-16 Joules
[    8.099713] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    8.120038] iTCO_vendor_support: vendor-support=0
[    8.133763] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11[    0.362297] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.362298] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.362299] pci 0000:00:1e.0:   bridge window [mem 0xcfa00000-0xfeafffff window] (subtractive decode)
[    0.362300] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.362724] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.362767] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.362808] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.362848] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.362888] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.362928] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.362968] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.363007] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.363068] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.363182] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.363183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.363184] vgaarb: loaded
[    0.363185] vgaarb: bridge control possible 0000:00:02.0
[    0.363242] PCI: Using ACPI for IRQ routing
[    0.364664] PCI: pci_cache_line_size set to 64 bytes
[    0.364696] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[    0.364697] e820: reserve RAM buffer [mem 0xca9fa000-0xcbffffff]
[    0.364698] e820: reserve RAM buffer [mem 0xcadb7000-0xcbffffff]
[    0.364699] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[    0.364700] e820: reserve RAM buffer [mem 0x12e000000-0x12fffffff]
[    0.364827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.364830] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.366851] clocksource: Switched to clocksource hpet
[    0.371824] VFS: Disk quotas dquot_6.6.0
[    0.371854] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.371926] pnp: PnP ACPI init
[    0.372053] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.372055] system 00:00: [io  0xffff] has been reserved
[    0.372056] system 00:00: [io  0xffff] has been reserved
[    0.372057] system 00:00: [io  0xffff] has been reserved
[    0.372058] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.372059] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.372060] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.372061] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.372064] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372087] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.372125] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.372127] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.372204] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.372386] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.372540] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.372541] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.372542] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.372543] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.372544] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.372545] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.372546] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.372547] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.372549] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.372550] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.372551] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.372586] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.372587] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[    0.372588] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.372669] pnp: PnP ACPI: found 7 devices
[    0.378667] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.378703] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.378720] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.378723] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.378729] pci 0000:00:1c.2:   bridge window [mem 0xe1000000-0xe19fffff]
[    0.378733] pci 0000:00:1c.2:   bridge window [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.378741] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.378751] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.378752] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.378753] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.378754] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.378754] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.378756] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.378757] pci_bus 0000:02: resource 1 [mem 0xe1000000-0xe19fffff]
[    0.378757] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe09fffff 64bit pref]
[    0.378758] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.378759] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.378760] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.378761] pci_bus 0000:03: resource 7 [mem 0xcfa00000-0xfeafffff window]
[    0.378762] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.378839] NET: Registered protocol family 2
[    0.379003] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.379057] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.379121] TCP: Hash tables configured (established 32768 bind 32768)
[    0.379137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.379147] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.379201] NET: Registered protocol family 1
[    0.379218] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.379538] PCI: CLS 64 bytes, default 64
[    0.379574] Unpacking initramfs...
[    0.675880] Freeing initrd memory: 21900K (ffff88e43552a000 - ffff88e436a8d000)
[    0.675983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.675985] software IO TLB [mem 0xc69fa000-0xca9fa000] (64MB) mapped at [ffff88e4c69fa000-ffff88e4ca9f9fff]
[    0.676389] audit: initializing netlink subsys (disabled)
[    0.676404] audit: type=2000 audit(1492176768.680:1): initialized
[    0.676645] Initialise system trusted keyrings
[    0.676729] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.676760] zbud: loaded
[    0.714889] Key type asymmetric registered
[    0.714890] Asymmetric key parser 'x509' registered
[    0.714904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.714925] io scheduler noop registered
[    0.714926] io scheduler deadline registered
[    0.714936] io scheduler cfq registered (default)
[    0.715291] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.715294] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.715303] intel_idle: MWAIT substates: 0x1120
[    0.715304] intel_idle: v0.4.1 model 0x2A
[    0.715414] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.715570] GHES: HEST is not enabled!
[    0.715612] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.736116] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.736543] Linux agpgart interface v0.103
[    0.736575] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.736575] AMD IOMMUv2 functionality not available on this system
[    0.736906] i8042: PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12
[    0.736906] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.739743] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.739745] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.739900] mousedev: PS/2 mouse device common for all mice
[    0.739934] rtc_cmos 00:01: RTC can wake from S4
[    0.740054] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.740123] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.740132] intel_pstate: Intel P-state driver initializing
[    0.740310] ledtrig-cpu: registered to indicate activity on CPUs
[    0.741138] NET: Registered protocol family 10
[    0.741477] mip6: Mobile IPv6
[    0.741480] NET: Registered protocol family 17
[    0.741482] mpls_gso: MPLS GSO support
[    0.741750] microcode: sig=0x206a7, pf=0x2, revision=0x29
[    0.741837] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.742032] registered taskstats version 1
[    0.742034] Loading compiled-in X.509 certificates
[    0.744270] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    0.744739] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    0.744766] zswap: loaded using pool lzo/zbud
[    0.745163] rtc_cmos 00:01: setting system clock to 2017-04-14 13:32:48 UTC (1492176768)
[    0.745246] PM: Hibernation image not present or could not be loaded.
[    0.747184] Freeing unused kernel memory: 1396K (ffffffffbd52d000 - ffffffffbd68a000)
[    0.747185] Write protecting the kernel read-only data: 12288k
[    0.747984] Freeing unused kernel memory: 2032K (ffff88e43be04000 - ffff88e43c000000)
[    0.752505] Freeing unused kernel memory: 1244K (ffff88e43c2c9000 - ffff88e43c400000)
[    0.762929] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.776608] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.776698] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.776711] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.777580] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.777626] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779104] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779126] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779188] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779553] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.779631] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.803209] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    0.812269] pps_core: LinuxPPS API ver. 1 registered
[    0.812270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.813082] PTP clock support registered
[    0.818365] SCSI subsystem initialized
[    0.818467] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.818468] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.818680] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    0.819684] ACPI: bus type USB registered
[    0.819705] usbcore: registered new interface driver usbfs
[    0.819715] usbcore: registered new interface driver hub
[    0.819738] usbcore: registered new device driver usb
[    0.821625] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.822223] ehci-pci: EHCI PCI platform driver
[    0.829659] libata version 3.00 loaded.
[    0.842259] AVX version of gcm_enc/dec engaged.
[    0.842260] AES CTR mode by8 optimization enabled
[    0.963272] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.084907] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 18:03:73:dc:f6:7c
[    1.084909] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.084950] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: E041FF-0FF
[    1.085178] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.085184] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.085196] ehci-pci 0000:00:1a.0: debug port 2
[    1.086579] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.089088] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.089262] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe1a70000
[    1.102918] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.102978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.102979] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.102981] usb usb1: Product: EHCI Host Controller
[    1.102982] usb usb1: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.102983] usb usb1: SerialNumber: 0000:00:1a.0
[    1.103233] hub 1-0:1.0: USB hub found
[    1.103242] hub 1-0:1.0: 2 ports detected
[    1.103499] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.103504] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.103516] ehci-pci 0000:00:1d.0: debug port 2
[    1.107429] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.107493] ehci-pci 0000:00:1d.0: irq 17, io mem 0xe1a50000
[    1.122915] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.123288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.123291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.123293] usb usb2: Product: EHCI Host Controller
[    1.123295] usb usb2: Manufacturer: Linux 4.9.0-0.bpo.2-amd64 ehci_hcd
[    1.123296] usb usb2: SerialNumber: 0000:00:1d.0
[    1.123622] hub 2-0:1.0: USB hub found
[    1.123664] hub 2-0:1.0: 2 ports detected
[    1.124067] ahci 0000:00:1f.2: version 3.0
[    1.124286] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.124288] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.135709] scsi host0: ahci
[    1.136013] scsi host1: ahci
[    1.136277] scsi host2: ahci
[    1.136396] scsi host3: ahci
[    1.136500] scsi host4: ahci
[    1.136591] scsi host5: ahci
[    1.136642] ata1: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40100 irq 27
[    1.136644] ata2: SATA max UDMA/133 abar m2048@0xe1a40000 port 0xe1a40180 irq 27
[    1.136645] ata3: DUMMY
[    1.136646] ata4: DUMMY
[    1.136646] ata5: DUMMY
[    1.136647] ata6: DUMMY
[    1.430903] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.449956] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.449978] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.450590] ata2.00: ATAPI: TSSTcorp DVD+/-RW SH-216AB, D200, max UDMA/100
[    1.450593] ata2.00: applying bridge limits
[    1.450895] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.451555] ata2.00: configured for UDMA/100
[    1.451693] ata1.00: ATA-8: WDC WD5000AAKX-753CA1, 19.01H19, max UDMA/133
[    1.451695] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.454463] ata1.00: configured for UDMA/133
[    1.454850] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-7 1H19 PQ: 0 ANSI: 5
[    1.504191] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW SH-216AB D200 PQ: 0 ANSI: 5
[    1.524405] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.524455] sd 0:0:0:0: [sda] Write Protect is off
[    1.524458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.524480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.537333] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.537335] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.537566] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.540508]  sda: sda1 sda2 < sda5 sda6 >
[    1.541401] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.583269] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.583272] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.583647] hub 1-1:1.0: USB hub found
[    1.583864] hub 1-1:1.0: 6 ports detected
[    1.603255] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.603257] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.603501] hub 2-1:1.0: USB hub found
[    1.603584] hub 2-1:1.0: 8 ports detected
[    1.686932] tsc: Refined TSC clocksource calibration: 3092.974 MHz
[    1.686940] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns
[    1.788401] random: fast init done
[    1.874863] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.890890] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[    1.891844] device-mapper: uevent: version 1.0.3
[    1.891955] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.966860] raid6: sse2x1   gen()  5918 MB/s
[    2.004852] usb 2-1.6: New USB device found, idVendor=0603, idProduct=00f2
[    2.004853] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.004854] usb 2-1.6: Product: USB Keyboard
[    2.004855] usb 2-1.6: Manufacturer: NOVATEK
[    2.009033] hidraw: raw HID events driver (C) Jiri Kosina
[    2.016211] usbcore: registered new interface driver usbhid
[    2.016212] usbhid: USB HID core driver
[    2.017577] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0603:00F2.0001/input/input3
[    2.034855] raid6: sse2x1   xor()  6080 MB/s
[    2.075052] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[    2.076765] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:0603:00F2.0002/input/input4
[    2.082864] usb 2-1.7: new low-speed USB device number 4 using ehci-pci
[    2.102852] raid6: sse2x2   gen() 11059 MB/s
[    2.122472] usb 1-1.4: New USB device found, idVendor=06f8, idProduct=e010
[    2.122473] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.122474] usb 1-1.4: Product: 802.11 bg WLAN
[    2.122475] usb 1-1.4: Manufacturer: Ralink
[    2.135130] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[    2.170861] raid6: sse2x2   xor()  8025 MB/s
[    2.196597] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c03e
[    2.196599] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.196600] usb 2-1.7: Product: USB-PS/2 Optical Mouse
[    2.196600] usb 2-1.7: Manufacturer: Logitech
[    2.199994] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C03E.0003/input/input5
[    2.200149] hid-generic 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.7/input0
[    2.238854] raid6: sse2x4   gen() 12911 MB/s
[    2.278864] usb 2-1.8: new high-speed USB device number 5 using ehci-pci
[    2.306851] raid6: sse2x4   xor()  9939 MB/s
[    2.306852] raid6: using algorithm sse2x4 gen() 12911 MB/s
[    2.306852] raid6: .... xor() 9939 MB/s, rmw enabled
[    2.306853] raid6: using ssse3x2 recovery algorithm
[    2.307965] xor: automatically using best checksumming function   avx      
[    2.328854] Btrfs loaded, crc32c=crc32c-intel
[    2.386875] PM: Starting manual resume from disk
[    2.386889] PM: Hibernation image partition 8:5 present
[    2.386890] PM: Looking for hibernation image.
[    2.387152] PM: Image not found (code -22)
[    2.387153] PM: Hibernation image not present or could not be loaded.
[    2.441027] usb 2-1.8: New USB device found, idVendor=0951, idProduct=1666
[    2.441037] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.441039] usb 2-1.8: Product: DataTraveler 3.0
[    2.441040] usb 2-1.8: Manufacturer: Kingston
[    2.441041] usb 2-1.8: SerialNumber: 08606E6D4080BE90270D94D5
[    2.446573] usb-storage 2-1.8:1.0: USB Mass Storage device detected
[    2.446682] scsi host6: usb-storage 2-1.8:1.0
[    2.446761] usbcore: registered new interface driver usb-storage
[    2.447894] usbcore: registered new interface driver uas
[    2.513646] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.711033] clocksource: Switched to clocksource tsc
[    3.506692] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[    3.580410] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    3.638024] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.638229] systemd[1]: Detected architecture x86-64.
[    3.649336] systemd[1]: Set hostname to <LibraZiK-studio-audio>.
[    3.974738] sd 6:0:0:0: [sdb] 61472768 512-byte logical blocks: (31.5 GB/29.3 GiB)
[    3.977059] sd 6:0:0:0: [sdb] Write Protect is off
[    3.977062] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.979292] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.979344] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    4.093948]  sdb: sdb1 sdb4
[    4.100573] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.432315] random: crng init done
[    4.477106] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.477202] systemd[1]: Listening on udev Control Socket.
[    4.477244] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.477366] systemd[1]: Created slice System Slice.
[    4.477417] systemd[1]: Listening on Journal Socket.
[    4.524902] systemd[1]: Starting Load Kernel Modules...
[    4.524934] systemd[1]: Reached target Remote File Systems (Pre).
[    5.033600] lp: driver loaded but no devices found
[    5.126244] ppdev: user-space parallel port driver
[    5.154100] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[    5.287035] parport0: irq 7 detected
[    5.383064] lp0: using parport0 (polling).
[    5.473897] fuse init (API version 7.26)
[    7.369416] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.408458] systemd-journald[723]: Received request to flush runtime journal from PID 1
[    7.611510] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    7.611514] ACPI: Power Button [PWRB]
[    7.611548] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    7.611549] ACPI: Power Button [PWRF]
[    7.629771] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    7.743165] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[    7.743170] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743172] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.743174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743175] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.743177] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743177] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[    7.743179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.743179] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.782325] [drm] Initialized
[    7.815185] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.815209] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    7.815232] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.869400] [drm] Memory usable by graphics device = 2048M
[    7.869401] [drm] Replacing VGA console driver
[    7.869902] Console: switching to colour dummy device 80x25
[    7.877128] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.877129] [drm] Driver supports precise vblank timestamp query.
[    7.879760] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.883520] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.883724] acpi device:01: registered as cooling_device4
[    7.883795] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    7.883821] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    7.883843] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.909827] fbcon: inteldrmfb (fb0) is primary device
[    7.953327] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.975972] Console: switching to colour frame buffer device 160x64
[    7.996129] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.099709] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    8.099711] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    8.099712] RAPL PMU: hw unit of domain package 2^-16 Joules
[    8.099713] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    8.120038] iTCO_vendor_support: vendor-support=0
[    8.133763] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.133799] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.133893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.463403] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[    8.463953] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[    8.463955] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    8.463957] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.463958] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.463959] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.463961] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x19
[    8.463963] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x18
[    8.543585] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.545585] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.546307] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.547239] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.547307] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.547359] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.547414] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.877234] intel_rapl: Found RAPL domain package
[    8.877237] intel_rapl: Found RAPL domain core
[    8.877239] intel_rapl: Found RAPL domain uncore
[    8.877248] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.198889] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[    9.641304] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[    9.723425] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.724336] usbcore: registered new interface driver rt73usb
[   10.017137] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0
[   10.771849] Adding 4071420k swap on /dev/sda5.  Priority:-1 extents:1 across:4071420k FS
[   16.104610] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[   16.163639] rt73usb 1-1.4:1.0: firmware: direct-loading firmware rt73.bin
[   16.163642] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[   18.011758] wlx0008d3359008: authenticate with 14:0c:76:f8:6d:28
[   18.063552] wlx0008d3359008: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[   18.065179] wlx0008d3359008: authenticated
[   18.066831] wlx0008d3359008: associate with 14:0c:76:f8:6d:28 (try 1/3)
[   18.071103] wlx0008d3359008: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=1)
[   18.080909] wlx0008d3359008: associated
[   18.888820] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   27.089344] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  971.811341] usb 2-1.8: USB disconnect, device number 5
root@LibraZiK-studio-audio:/home/nicolasmao2#
[    8.133799] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    8.133893] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.463403] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[    8.463953] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[    8.463955] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[    8.463957] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.463958] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.463959] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.463961] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x19
[    8.463963] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x18
[    8.543585] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    8.545585] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.546307] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.547239] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.547307] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.547359] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.547414] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.877234] intel_rapl: Found RAPL domain package
[    8.877237] intel_rapl: Found RAPL domain core
[    8.877239] intel_rapl: Found RAPL domain uncore
[    8.877248] intel_rapl: RAPL package 0 domain package locked by BIOS
[    9.198889] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[    9.641304] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[    9.723425] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.724336] usbcore: registered new interface driver rt73usb
[   10.017137] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0
[   10.771849] Adding 4071420k swap on /dev/sda5.  Priority:-1 extents:1 across:4071420k FS
[   16.104610] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[   16.163639] rt73usb 1-1.4:1.0: firmware: direct-loading firmware rt73.bin
[   16.163642] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[   18.011758] wlx0008d3359008: authenticate with 14:0c:76:f8:6d:28
[   18.063552] wlx0008d3359008: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[   18.065179] wlx0008d3359008: authenticated
[   18.066831] wlx0008d3359008: associate with 14:0c:76:f8:6d:28 (try 1/3)
[   18.071103] wlx0008d3359008: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=1)
[   18.080909] wlx0008d3359008: associated
[   18.888820] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   27.089344] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  971.811341] usb 2-1.8: USB disconnect, device number 5
root@LibraZiK-studio-audio:/home/nicolasmao2#





Un énorme merci d'avance !

Dernière modification par calixtus06 (21-04-2017 20:30:53)


Il n'y a pas de mauvaises questions...

Hors ligne

#2 14-04-2017 16:20:24

Mercredi
Membre
Distrib. : Testing/Sid
Noyau : 5.2
(G)UI : Gnome-shell
Inscription : 25-09-2015

Re : [RESOLU] impossible de se connecter en wifi

Bonjour,
Sur l'image de l'échec du téléchargement des fichiers d'index, ça dit qu'il est impossible de récupérer les sources du cdrom Live d'installation mais ça ne mentionne pas les autres sources.
Peux tu donner ton sources.list avec la commande :

cat /etc/apt/sources.list


Déjà si là-dedans tu vois des lignes commençant par deb cdrom sans # devant, tu peux en ajouter un (de #) pour les commenter puis essayer de réactualiser les dépôts.

Edit : pour commenter la source du cdrom, tu peux le faire via Synaptic aussi en décochant la case devant puis réactualiser.

Dernière modification par Mercredi (14-04-2017 16:22:49)

Hors ligne

#3 14-04-2017 17:34:52

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

https://debian-facile.org/images/file-R … 9161ffb6f1
Ensuite apt update et apt upgrade en su

Dernière modification par calixtus06 (14-04-2017 17:36:41)


Il n'y a pas de mauvaises questions...

Hors ligne

#4 14-04-2017 18:11:14

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : [RESOLU] impossible de se connecter en wifi

Bonsoir tu peux commenter les lignes deb-src aussi
évite les copies d'écran quand c'est possible, tu colles le texte avec les bonnes balises
voir Voir le tuto : Le code, ça pique moins les yeux en couleur

#####DEBIAN Jessie##
deb http://httpredir.debian.org/debian/ jessie main contrib non-free
# deb-src http://httpredir.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
# deb-src http://security.debian.org/ jessie/updates main contrib non-free
deb http://httpredir.debian.org/debian/ jessie-updates main contrib non-free
# deb-src http://httpredir.debian.org/debian/ jessie-updates main contrib non-free

deb http://ftp.debian.org/debian/ jessie-backports non-free contrib main
# deb-src http://ftp.debian.org/debian/ jessie-backports main contrib non-free

###SUPPLEMENT MULTIMEDIA###
#Activation temporaire pour Avidemux
#deb http://www.deb-multimedia.org jessie main non-free
#deb http://www.deb-multimedia.org jessie-backports main
 


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#5 14-04-2017 20:26:35

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

@calixtus06: tant qu'à faire, ajouter contrib avec non-free

[mode aéré]

Hors ligne

#6 14-04-2017 20:27:51

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

là j'ai le filaire en même temps que la clef wifi branchée, ça ne devrait pas poser de problème  ?


#deb cdrom:[Debian GNU/Linux 8 _Jessie_ - Official Snapshot amd64 LIVE/INSTALL $

deb [url]http://ftp.fr.debian.org/debian/[/url] jessie main contrib non-free
#deb-src [url]http://ftp.fr.debian.org/debian/[/url] jessie main

deb [url]http://security.debian.org/[/url] jessie/updates main
#deb-src [url]http://security.debian.org/[/url] jessie/updates main

# jessie-updates, previously known as 'volatile'
deb [url]http://ftp.fr.debian.org/debian/[/url] jessie-updates main

Dernière modification par calixtus06 (14-04-2017 20:36:36)


Il n'y a pas de mauvaises questions...

Hors ligne

#7 14-04-2017 20:52:42

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

je mettrais contrib sur les 3 dépôts, et j'espère que les "url" "/url" ne se trouvent pas dans ton sources list. bien regarder ce qu'a indiqué Croutons
(pas le multimedia)

[mode aéré]

Hors ligne

#8 14-04-2017 20:53:02

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

Au cas où je vérifie que ma carte fonctionne: sur cette capture on voit qu'elle scanne les box alentour mais ne parvient pas à " s'accrocher" . Une remarque j'ai un autre ordi qui s'appelle nicolasmao et non nicolasmao2. Est ce que cela pourrait poser problème ?

https://debian-facile.org/images/file-R … afc8c02276

Edit 1 :

kyodev a écrit :

je mettrais contrib sur les 3 dépôts, et j'espère que les "url" "/url" ne se trouvent pas dans ton sources list. bien regarder ce qu'a indiqué Croutons
(pas le multimedia)



Comment mettrais tu contrib sur les lignes. Je suis une quiche en scrip.

capture image du sources.list

Peux tu me ré expliquer ta deuxième phrase concernant url et /url

Encore merci

Edit 2 :
Au fait c'est quoi ce cd rom ???

Dernière modification par calixtus06 (14-04-2017 20:55:31)


Il n'y a pas de mauvaises questions...

Hors ligne

#9 14-04-2017 22:03:27

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

le source que tu nous indiquais:

deb [url]http://ftp.fr.debian.org/debian/[/url] jessie main contrib non-free

je voulais te signaler de ne pas mettre ces balises url:

deb http://ftp.fr.debian.org/debian/ jessie main contrib non-free

le dernier source que tu nous indiques est ok à ce niveau
ce n'est pas bloquant pour le moment, mais généralement, quand on sort du totalement libre on met les trois main contrib non-free, donc

deb http://ftp.fr.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/[/url] jessie/updates main contrib non-free
deb http://ftp.fr.debian.org/debian/ jessie-updates main contrib non-free

et pour la bonne forme, on n'utilise plus

http://httpredir.debian.org/

mais

http://deb.debian.org/



pour le même nom d'ordinateur, je ne pense pas que cela ça rédhibitoire pour la connaxion.

le screenshot que tu retournes ne permet pas voir voir l'erreur concrète. vu de loin ça ressemble à un réseau non sécurisé, c'est tout. Qu'entends tu par?:

parvient pas à " s'accrocher"



le cdrom, est le support sur lequel tu as fait l'installation (CD ou clé usb)

Dernière modification par kyodev (14-04-2017 22:04:34)


[mode aéré]

Hors ligne

#10 14-04-2017 22:40:56

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

kyodev a écrit :


le screenshot que tu retournes ne permet pas voir voir l'erreur concrète. vu de loin ça ressemble à un réseau non sécurisé, c'est tout. Qu'entends tu par?:

parvient pas à " s'accrocher"



le cdrom, est le support sur lequel tu as fait l'installation (CD ou clé usb)



J'ai éteint mon pc et j'ai booté sur la clef usb multiboot que je me suis créée. Mint et ubuntu par le biais de la clef usb/wifi  voient ma box . Je rentre la clef de sécurité et idem ça tourne dans le vide. ça "n'accroche " pas. Je voulais dire que ça n'établit pas de connection à internet.

Que veux tu dire par réseau non sécurisé ? Le problème viendrait d'un mauvais paramètrage de ma box ?


Il n'y a pas de mauvaises questions...

Hors ligne

#11 15-04-2017 00:11:34

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

excuse moi, vu de loin, image trop grande et détails trop petits, j'ai confondu avec feewifi. donc oublies ma remarque.

un extrait de ton dmesg

[    9.198889] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[    9.641304] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[    9.723425] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.724336] usbcore: registered new interface driver rt73usb
[   10.017137] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0

[   16.104610] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[   16.163639] rt73usb 1-1.4:1.0: firmware: direct-loading firmware rt73.bin
[   16.163642] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[   18.011758] wlx0008d3359008: authenticate with 14:0c:76:f8:6d:28
[   18.063552] wlx0008d3359008: send auth to 14:0c:76:f8:6d:28 (try 1/3)
[   18.065179] wlx0008d3359008: authenticated
[   18.066831] wlx0008d3359008: associate with 14:0c:76:f8:6d:28 (try 1/3)
[   18.071103] wlx0008d3359008: RX AssocResp from 14:0c:76:f8:6d:28 (capab=0x411 status=0 aid=1)
[   18.080909] wlx0008d3359008: associated
[   18.888820] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
 

A priori ton wifi est reconnu et s'associe à la box.
tu as aussi un câble réseau branché?
un autre pc se connecte sur cette box? en wifi?
que dit?:

ifconfig


que retourne?:

cat /var/log/syslog | grep -i "dhc\|dhcp"


quel est le type de la freebox?
ni Mint, ni Ubuntu, ni Debian ne se connecte ??

je te suggère de modifier le titre de ta discussion, par exemple: impossible de se connecter en wifi

Dernière modification par kyodev (15-04-2017 00:13:01)


[mode aéré]

Hors ligne

#12 15-04-2017 07:09:05

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

A priori ton wifi est reconnu et s'associe à la box.
tu as aussi un câble réseau branché?
un autre pc se connecte sur cette box? en wifi?
que dit?:



Oui j'ai aussi un câble de branché pour le moment et j'ai essayé sans pour le même résultat.
Oui j'ai d'autres pc branchés en wifi sur ma box

ifconfig


enp0s25   Link encap:Ethernet  HWaddr 18:03:73:dc:f6:7c  
          inet adr:192.168.0.33  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::1a03:73ff:fedc:f67c/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3285 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1998 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:4481799 (4.2 MiB)  TX bytes:253356 (247.4 KiB)
          Interruption:20 Mémoire:e1a00000-e1a20000

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:31 errors:0 dropped:0 overruns:0 frame:0
          TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1
          RX bytes:3490 (3.4 KiB)  TX bytes:3490 (3.4 KiB)

wlx0008d3359008 Link encap:Ethernet  HWaddr 00:08:d3:35:90:08  
          adr inet6: fe80::208:d3ff:fe35:9008/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:78 errors:0 dropped:0 overruns:0 frame:0
          TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:16649 (16.2 KiB)  TX bytes:5458 (5.3 KiB)

root@LibraZiK-studio-audio:/home/nicolasmao2#
 


cat /var/log/syslog | grep -i "dhc\|dhcp"


root@LibraZiK-studio-audio:/home/nicolasmao2#



C'est une freebox revolution

Mint, ubuntu ne se connectent pas  en live depuis ma multiboot. Mais fonctionnent sur d'autres pc avec la même clef usb en live. Ce pc fonctionnait très bien en wifi avant l'installation de librazik et avec cette même clef usb wifi

Edit :
test croisé: je viens de brancher cette clef usb/wifi sur l'ordi de mon fils ( antix 16) et je peux me connecter à internet. Il n'y a pas d'autre carte wifi.

Un ifconfig sur l'ordi de Gaspard:

ifconfig


eth0      Link encap:Ethernet  HWaddr 00:11:43:41:0f:bf  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interruption:11

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:124 errors:0 dropped:0 overruns:0 frame:0
          TX packets:124 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0
          RX bytes:8224 (8.0 KiB)  TX bytes:8224 (8.0 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:08:d3:35:90:08  
          inet adr:192.168.0.43  Bcast:192.168.0.255  Masque:255.255.255.0
          adr inet6: fe80::208:d3ff:fe35:9008/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:10742 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6066 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000
          RX bytes:13649102 (13.0 MiB)  TX bytes:840540 (820.8 KiB)
 


Il n'y a pas de mauvaises questions...

Hors ligne

#13 15-04-2017 08:03:58

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

calixtus06 a écrit :

wlx0008d3359008 Link encap:Ethernet  HWaddr 00:08:d3:35:90:08

ok, voilà le problème?
ton interface n'est pas wlan0 (comme ethernet n'est pas eth0).
ce qui explique dans ton dmesg

[   10.017137] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0
...
[   10.017137] rt73usb 1-1.4:1.0 wlx0008d3359008: renamed from wlan0


Ce qui est surprenant si tu as installé debian 8 comme indiqué.
que dit?:

cat /etc/debian_version



edit: si le nommage de ta carte ethernet est correct(enp0s25), mais étonnamment récent, wlx par contre indique une erreur de reconnaissance de ton interface wili

Dernière modification par kyodev (15-04-2017 08:46:46)


[mode aéré]

Hors ligne

#14 15-04-2017 08:12:50

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

que disent:

nmcli

nmcli radio wifi


après tu peux essayer?:

service network-manager restart


puis

nmcli

puis éventuellement surfer
que dit?:

nmcli -v

Dernière modification par kyodev (16-04-2017 22:00:23)


[mode aéré]

Hors ligne

#15 15-04-2017 08:58:18

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : [RESOLU] impossible de se connecter en wifi

Bonjour
Vouloir ce connecter en wifi alors que on est déja connecté en wifi ne poserait il pas problème?

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#16 15-04-2017 09:09:31

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

il n'est pas connecté en wifi....

[mode aéré]

Hors ligne

#17 15-04-2017 09:11:11

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : [RESOLU] impossible de se connecter en wifi

Bonjour smile

kyodev a écrit :

Ce qui est surprenant si tu as installé debian 8 comme indiqué


C'est librazik debian 8 qui est indiqué dans le premier message et il est bien possible qu'elle s'éloigne de Jessie sur certains points pour se rapprocher de testing.
Le noyau utilisé : https://librazik.tuxfamily.org/dotclear … s-LibraZiK
Je n'ai pas creusé davantage pour connaître les différences avec Debian 8 de ce système.

Certaines interfaces internet, principalement des interfaces Wifi, nécessitent de charger des pilotes spécifiques pour fonctionner. Les interfaces utilisant des micro-logiciels libres sont déjà installées et configurées dans LibraZiK. Cependant, d'autres interfaces utilisent des pilotes non-libres qui, n'étant pas des logiciels libres, ne sont pas installés directement par LibraZiK.

Pour installer de tels pilotes, vous devrez activer les catégories “contrib” et/ou “non-free” 1)… Pour installer ces paquets provenant des catégories “contrib” ou “non-free”, vous lirez : cette explication en l'appliquant aux adresses de dépôt (colonne “distribution”) LZK-PP-users et jessie.


sources de cette citation

Hors ligne

#18 15-04-2017 09:18:44

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

 cat /etc/debian_version


8.7
root@LibraZiK-studio-audio:/home/nicolasmao2#



nmcli


Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }

OPTIONS
  -t[erse]                                   terse output
  -p[retty]                                  pretty output
  -m[ode] tabular|multiline                  output mode
  -f[ields] <field1,field2,...>|all|common   specify fields to output
  -e[scape] yes|no                           escape columns separators in values
  -n[ocheck]                                 don't check nmcli and NetworkManager versions
  -a[sk]                                     ask for missing parameters
  -w[ait] <seconds>                          set timeout waiting for finishing operations
  -v[ersion]                                 show program version
  -h[elp]                                    print this help

OBJECT
  g[eneral]       NetworkManager's general status and operations
  n[etworking]    overall networking control
  r[adio]         NetworkManager radio switches
  c[onnection]    NetworkManager's connections
  d[evice]        devices managed by NetworkManager

root@LibraZiK-studio-audio:/home/nicolasmao2#



 nmcli radio wifi


activé
root@LibraZiK-studio-audio:/home/nicolasmao2#

Dernière modification par calixtus06 (15-04-2017 09:41:57)


Il n'y a pas de mauvaises questions...

Hors ligne

#19 15-04-2017 09:18:53

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

@chalu: génial, ça aide pour débugguer hmm

mais à priori, cela vient de nouvelle fonctionnalités de NetworkManager version 1.4 et de matériel un peu ancien
j'ai aperçu une éventuelle correction, mais je suis en attente

Edit :
super, nmcli ne réagit pas comme le mien... :\
essayes

nmcli -f all

Quand tu as redémarré network manager, la connexion s'est faite? tu as pu surfer?

Dernière modification par kyodev (15-04-2017 09:48:24)


[mode aéré]

Hors ligne

#20 15-04-2017 09:51:55

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

root@LibraZiK-studio-audio:/home/nicolasmao2# service network-manager restart
root@LibraZiK-studio-audio:/home/nicolasmao2#


Edit 1:

 nmcli -v


outil nmcli, version 0.9.10.0
root@LibraZiK-studio-audio:/home/nicolasmao2#



Edit 2 :

 nmcli -f all


Usage: nmcli [OPTIONS] OBJECT { COMMAND | help }

OPTIONS
  -t[erse]                                   terse output
  -p[retty]                                  pretty output
  -m[ode] tabular|multiline                  output mode
  -f[ields] <field1,field2,...>|all|common   specify fields to output
  -e[scape] yes|no                           escape columns separators in values
  -n[ocheck]                                 don't check nmcli and NetworkManager versions
  -a[sk]                                     ask for missing parameters
  -w[ait] <seconds>                          set timeout waiting for finishing operations
  -v[ersion]                                 show program version
  -h[elp]                                    print this help

OBJECT
  g[eneral]       NetworkManager's general status and operations
  n[etworking]    overall networking control
  r[adio]         NetworkManager radio switches
  c[onnection]    NetworkManager's connections
  d[evice]        devices managed by NetworkManager

root@LibraZiK-studio-audio:/home/nicolasmao2#
 


Il n'y a pas de mauvaises questions...

Hors ligne

#21 15-04-2017 09:55:30

kawer
Membre
Lieu : Earth
Distrib. : Debian Stable
Noyau : Current
(G)UI : Xfce
Inscription : 08-10-2013

Re : [RESOLU] impossible de se connecter en wifi

Afin de voir si c'est network-manager qui est incriminé ou le kernel/pilote je te propose la solution suivante, désactive network-manager, et :

Tu crée un fichier :

nano /etc/wpa_supplicant.conf



Il doit ressembler à ceci :


network={
  ssid="le_nom_de_ta_box"
  psk="ta_clé_wpa_entre_guillemets"
}
 



Pour enregistrer ton fichier avec nano, Ctrl+O et Ctrl+x pour quitter

Ensuite tu lance la commande suivante :


wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf
 



dhclient wlan0



Ensuite :


ping 8.8.8.8

et

dig google.fr
 

Dernière modification par kawer (15-04-2017 11:07:04)


Songez à ce que vous avez été, à ce que vous êtes, et à ce que vous serez un jour, et vous deviendrez humbles. Saint Vincent de Paul
La maladie la plus constante et la plus mortelle, mais aussi la plus méconnue de toute société, est l’indifférence. Abbé Pierre
Carpe diem, quam minimum credula postero. Horace

Hors ligne

#22 15-04-2017 09:56:56

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

et après avoir redémarré ce service, comment est la connexion?
que dit

dpkg -l | grep network-manager



Edit :
@kawer, en LISANT plus haut, il me semble que dmesg est suffisant ...
en surfant, ça se trouve aussi assez rapidement


[mode aéré]

Hors ligne

#23 15-04-2017 10:33:02

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU] impossible de se connecter en wifi

Désolé. J'ai du partir en vitesse. On reprend demain soir si vous êtes disponible.:)

Il n'y a pas de mauvaises questions...

Hors ligne

#24 15-04-2017 11:10:31

kawer
Membre
Lieu : Earth
Distrib. : Debian Stable
Noyau : Current
(G)UI : Xfce
Inscription : 08-10-2013

Re : [RESOLU] impossible de se connecter en wifi

@kyodvd, non dmesg n'est pas suffisant, et pour ne pas faire des postes a rallonge pour un problème de dns ou autres il est préconiser les commandes que j'ai indiqué lorsqu'on est helper sur un forum. Tu apprendra avec le temps.

Songez à ce que vous avez été, à ce que vous êtes, et à ce que vous serez un jour, et vous deviendrez humbles. Saint Vincent de Paul
La maladie la plus constante et la plus mortelle, mais aussi la plus méconnue de toute société, est l’indifférence. Abbé Pierre
Carpe diem, quam minimum credula postero. Horace

Hors ligne

#25 15-04-2017 11:21:52

kyodev
Banni(e)
Lieu : Lyon
Distrib. : Debian
Noyau : probablement stretch
(G)UI : variable selon l'humeur de naguam
Inscription : 18-08-2013

Re : [RESOLU] impossible de se connecter en wifi

sûrement  helper malekal est formateur, mais "helper" c'est aussi suivre le fil entièrement wink

[mode aéré]

Hors ligne

Pied de page des forums