logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 03-02-2018 16:09:45

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

[RESOLU]STEAM ne se lance pas, comment faire ?

Bonjour,

J'essaie d'installer steam mais à priori j'ai un problème de dépôt.

pluma /etc/apt/source.list


#

# deb cdrom:[Official Debian GNU/Linux Live 9.1.0 gnome 2017-07-23T01:42]/ stretch main

# deb cdrom:[Official Debian GNU/Linux Live 9.1.0 gnome 2017-07-23T01:42]/ stretch main

deb http://ftp.fr.debian.org/debian/ stretch main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ stretch main contrib non-free

# deb http://deb.debian.org/debian/ stretch/updates main contrib non-free
# deb-src http://deb.debian.org/debian/ stretch/updates main contrib non-free



# stretch-updates, previously known as 'volatile'
deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
deb-src http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free



Une fois ici, comment choisir ?

https://packages.debian.org/search?sear … =libc.so.6

Mon cpu:

lscpu


Architecture :        x86_64
Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit
Boutisme :            Little Endian
Processeur(s) :       3
Liste de processeur(s) en ligne : 0-2
Thread(s) par cœur : 1
Cœur(s) par socket : 3
Socket(s) :           1
Nœud(s) NUMA :       1
Identifiant constructeur : AuthenticAMD
Famille de processeur : 16
Modèle :             5
Nom de modèle :      AMD Athlon(tm) II X3 440 Processor
Révision :           2
Vitesse du processeur en MHz : 1800.000
Vitesse maximale du processeur en MHz : 3000,0000
Vitesse minimale du processeur en MHz : 800,0000
BogoMIPS :            6027.60
Virtualisation :      AMD-V
Cache L1d :           64K
Cache L1i :           64K
Cache L2 :            512K
Nœud NUMA 0 de processeur(s) : 0-2
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid eagerfpu pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate vmmcall npt lbrv svm_lock nrip_save
root@debian9:/home/gaspard#
 



Merci d'avance

Dernière modification par calixtus06 (22-02-2018 23:55:22)


Il n'y a pas de mauvaises questions...

Hors ligne

#2 03-02-2018 17:45:28

anonyme
Invité

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Bonjour
le souces.list a utiliser avec stretch


#stretch 9
deb http://security.debian.org/ stretch/updates main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
#deb http://ftp.fr.debian.org/debian/ stretch-backports main contrib non-free
 



il te faut activer le multiarch de debian avec prise en charge du i386  (si tu est en amd64 )

un driver vidéo fonctionnel (amd64 et i386 )

le paquet sur debian pour steam se nomme "steam:i386"

tu peu utiliser aptitude et l'option -s pour simuler
par exemple


aptitude -s install steam
 



ce qui retourne beaucoup de paquets en i386 (mon exemple est sur une testing ne fait pas attention aux versions des paquets)


Note: selecting "steam:i386" instead of the virtual package "steam"
Les NOUVEAUX paquets suivants vont être installés :
  gcc-7-base:i386{a} libbsd0:i386{a} libc6:i386{a} libdrm-amdgpu1:i386{a} libdrm-intel1:i386{a} libdrm-nouveau2:i386{a}
  libdrm-radeon1:i386{a} libdrm2:i386{a} libedit2:i386{a} libelf1:i386{a} libexpat1:i386{a} libffi6:i386{a}
  libgcc1:i386{a} libgl1:i386{a} libgl1-mesa-dri:i386{a} libgl1-mesa-glx:i386{a} libglapi-mesa:i386{a} libglvnd0:i386{a}
  libglx-mesa0:i386{a} libglx0:i386{a} libgpg-error0:i386{a} libgpm2:i386{a} libllvm5.0:i386{a} libncurses5:i386{a}
  libpciaccess0:i386{a} libsensors4:i386{a} libstdc++6:i386{a} libtinfo5:i386{a} libtxc-dxtn-s2tc:i386{a}
  libudev1:i386{a} libx11-6:i386{a} libx11-xcb1:i386{a} libxau6:i386{a} libxcb-dri2-0:i386{a} libxcb-dri3-0:i386{a}
  libxcb-glx0:i386{a} libxcb-present0:i386{a} libxcb-sync1:i386{a} libxcb-xfixes0:i386{a} libxcb1:i386{a}
  libxdamage1:i386{a} libxdmcp6:i386{a} libxext6:i386{a} libxfixes3:i386{a} libxinerama1:i386{a} libxshmfence1:i386{a}
  libxss1:i386{a} libxxf86vm1:i386{a} steam:i386 zlib1g:i386{a}
Les paquets suivants seront mis à jour :
  libelf1
1 paquets mis à jour, 50 nouvellement installés, 0 à enlever et 11 non mis à jour.
Il est nécessaire de télécharger 10,2 Mo/30,4 Mo d'archives. Après dépaquetage, 236 Mo seront utilisés.

Note: Using 'Simulate' mode.
Voulez-vous continuer ? [Y/n/?]
 



en plus que aptitude te demande de confirmer par oui ou non tu a l option -s qui force une simulation "Note: Using 'Simulate' mode."

nota : si tout est correct il te suffit d'enlever le "-s" a la commande et de répondre "y" a la question
ça fonctionne aussi avec "apt-get -s install steam:i386"
ps: dans synaptic tu ne trouvera pas le paquet steam , il apparaitra après l'installation

a la fin de l'installation tu trouvera un lien dans "applications => jeux => steam"  que tu lance pour finaliser l installation (en user) et créer ton compte ou utiliser un compte

Dernière modification par anonyme (03-02-2018 18:01:48)

#3 04-02-2018 00:54:00

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

il te faut activer le multiarch de debian avec prise en charge du i386  (si tu est en amd64 )

un driver vidéo fonctionnel (amd64 et i386 )

Salut Robert ! merci encore pour ton secours. Comment puis je savoir ce qui me manquait comme dépôt ? J'ai pourtant passé du temps à m'assurer télécharger une iso complète ...

Pour le multiarch comment dois je m'y prendre ? Fait :

dpkg --add-architecture i386



Pour le driver de la carte graphique ....hmm j'hésite à faire la manip: nvidia-detect m'a conseillé un driver et tout à planter genre Windows , plus de souris, rien.

Du coup j'hésite. Comment fais tu une install propre du pilote de la carte graphique ?

Et l'installation de steam i386 me demande encore cette satané librairie :libc.so.6 ...Où est elle ? Quand je vais sur google qui me renvoie aux paquets debian, je la trouve mais gdebi me dit qu'elle est déjà installée (????))

Dernière modification par calixtus06 (04-02-2018 00:59:06)


Il n'y a pas de mauvaises questions...

Hors ligne

#4 04-02-2018 01:54:45

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Bon c'est la galère.  J'ai du reinstaller debian et donc le problème s'est reproduit : install du pilote recommandé par la commande nvidia-detect et boom ordi inutilisable même en live pour purger le pilote proprio. ..

Il n'y a pas de mauvaises questions...

Hors ligne

#5 04-02-2018 12:10:46

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Remarque ce problème de pilote nvidia n'a rien à voir avec steam et le fait de devoir rajouter
l'architecture i386. D'abord il faudrait ne pas installer le pilote nvidia recommandé par nvidia-detect.
Peut-être faudra-t-il en installer une version plus ancienne (les pilotes nvidia-legacy… ) ou plus récente
ce qui est plus délicat. Ou alors, envisager d'utiliser nouveau.

D'autre part, puisque tu veux utiliser steam (qui n'est pas vraiment formidable d'après ce que j'ai entendu
(moi, je ne joue pas, donc bon), mais passons) qui ne veut fonctionner qu'en 32 bits. Pourquoi ne pas installer
directement un linux 32 bits, ça simplifiera déjà cette étape. Pour installer un linux 32 bits, il suffit
de récupérer une image d'installation 32 bits (i386)… et de l'installer.

Hors ligne

#6 04-02-2018 14:14:08

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Salut
J'ai ré installé debian , je n'ai pas installé de logiciel propriétaire pour la carte graphique.Steam semble installé mais rien ne démarre:

steam


Running Steam on debian 9 64-bit
STEAM_RUNTIME is enabled automatically
Pins up-to-date!
[2018-02-04 14:08:43] Startup - updater built Dec 15 2017 11:47:44
Looks like steam didn't shutdown cleanly, scheduling immediate update check
[2018-02-04 14:08:43] Checking for update on startup
[2018-02-04 14:08:43] Checking for available updates...
[2018-02-04 14:08:44] Download skipped: /client/steam_client_ubuntu12 version 1513371133, installed version 1513371133
[2018-02-04 14:08:44] Nothing to do
[2018-02-04 14:08:44] Verifying installation...
[2018-02-04 14:08:44] Performing checksum verification of executable files
[2018-02-04 14:08:45] Verification complete
Refresh rate: 0
Refresh rate: 0
Refresh rate: 0
Refresh rate: 0
Refresh rate: 0
Refresh rate: 0
Refresh rate: 0
Refresh rate: 0
Refresh rate: 0
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
Refresh rate: 15
nicolas@GASPARD:~$ Refresh rate: 15
 



Que dois-je comprendre ?

Concernant le pilote de la carte graphique, nvidia-detect me propose d'installer un pilote avec des xx dedans et j'ai comme l'impression qu'il m'installe tous les pilotes de chez nvidia...

lspci | grep "VGA compatible controller"


01:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7200 GS / 7300 SE] (rev a1)



nvidia-detect



Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7200 GS / 7300 SE] [10de:01d3] (rev a1)

Checking card:  NVIDIA Corporation G72 [GeForce 7200 GS / 7300 SE] (rev a1)
Your card is only supported up to the 304 legacy drivers series.
It is recommended to install the
    nvidia-legacy-304xx-driver
package.
root@GASPARD:/home/nicolas#

Dernière modification par calixtus06 (04-02-2018 14:19:54)


Il n'y a pas de mauvaises questions...

Hors ligne

#7 04-02-2018 17:01:39

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

calixtus06 a écrit :



01:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7200 GS / 7300 SE] (rev a1)
 


humm… ça ne serait pas un assez vieille carte ça ? Si c'est le cas, je ne suis pas étonné que ça pose
autant de problèmes…


<Hors Sujet>
Ça n'a rien à voir mais, j'en parle pour bien montrer la position de nvidia : nvidia a décidé d'arrêter
les mises à jour pour le pilote legacy 304xx (et les plus anciens je suppose…). Ça m'embête
car c'est le pilote qui fonctionne bien sur ma machine, indépendamment du modèle de la carte
graphique, car sur certaines cartes mères il n'est pas possible d'utiliser leur « nouveau » système
pour communiquer avec la carte graphique… bref je sens que je vais acheter une radeon…
mais encore faut-il savoir laquelle acheter car beaucoup ne fonctionnent pas super sur linux
en tous cas j'ai eu pas mal de problèmes avec une radeon par le passé… d'où mon passage à
nvidia…
</Hors Sujet>

Hors ligne

#8 04-02-2018 19:55:38

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Il y a quelques questions qui reste en suspend. Je vois que tu as de nouveau installé une
debian en 64 bits, jusque là pas de soucis. Mais as-ru bien installé toutes les bibliothèques
nécessaires pour le driver graphique nouveau en 32 bits. La libc6 seule ne suffit pas,
il faut les bibliothèques pour X11, et en particulier la version 32 bits de la partie de nouveau qui est
chargée par Xorg, ainsi que toutes ses dépendances. Si tu as tout installer comme il faut, il faut comprendre
que steam ne peut pas fonctionner avec nouveau.

Reste à savoir pourquoi le pilote nvidia plante ta machine…  mais ça va être plus difficile de le savoir
car il ne te laisse pas la main sur la machine.

Dernière modification par enicar (05-02-2018 08:05:56)

Hors ligne

#9 04-02-2018 20:44:42

èfpé
Membre
Inscription : 10-07-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

message à supprimer

Dernière modification par èfpé (06-02-2018 06:44:42)

Hors ligne

#10 04-02-2018 21:11:24

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

bonjour ;

la distribution de calixtus06 :  https://librazik.tuxfamily.org/

installer librazik depuis une base debian (stable ?)

calixtus06 , si tu veux mettre une carte AMD RX5xx (donc récente) sur ton syteme ,

il vaut mieux être sous buster ( testing ) .

Non pas que stretch (stable) ne fonctionne pas , mais ,  je ne  garantis pas  la pleine compatibilité .

il y a de grandes chances que tu aies du mal à l'installer , mais , avec les derniers kernels (4.14.0-3) , ça va déjà beaucoup mieux .

alors les cartes AMD Vega ...

mon Xorg sous buster :
ma distribution :

~$ uname -a


Linux Alain-PC-BUSTER 4.15.1-amd64 #1 SMP Sun Feb 4 09:41:01 CET 2018 x86_64 GNU/Linux


~$ cat ~/.local/share/xorg/Xorg.0.log


[    48.571] (--) Log file renamed from "/home/alain/.local/share/xorg/Xorg.pid-1738.log" to "/home/alain/.local/share/xorg/Xorg.0.log"
[    48.571]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[    48.571] X Protocol Version 11, Revision 0
[    48.571] Build Operating System: Linux 4.9.0-5-amd64 x86_64 Debian
[    48.571] Current Operating System: Linux Alain-PC-BUSTER 4.15.1-amd64 #1 SMP Sun Feb 4 09:41:01 CET 2018 x86_64
[    48.571] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.1-amd64 root=UUID=236dd9cc-2187-4db5-bdbc-0d3578bfae6d ro quiet
[    48.572] Build Date: 26 January 2018  04:30:21PM
[    48.572] xorg-server 2:1.19.6-1 (https://www.debian.org/support)
[    48.572] Current version of pixman: 0.34.0
[    48.572]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    48.572] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    48.572] (==) Log file: "/home/alain/.local/share/xorg/Xorg.0.log", Time: Sun Feb  4 12:09:27 2018
[    48.604] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    48.632] (==) No Layout section.  Using the first Screen section.
[    48.632] (==) No screen section available. Using defaults.
[    48.632] (**) |-->Screen "Default Screen Section" (0)
[    48.632] (**) |   |-->Monitor "<default monitor>"
[    48.642] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    48.642] (==) Automatically adding devices
[    48.642] (==) Automatically enabling devices
[    48.642] (==) Automatically adding GPU devices
[    48.642] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    48.642] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    48.642]  Entry deleted from font path.
[    48.642] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    48.642] (==) ModulePath set to "/usr/lib/xorg/modules"
[    48.642] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    48.646] (II) Loader magic: 0x55ec50220de0
[    48.646] (II) Module ABI versions:
[    48.646]  X.Org ANSI C Emulation: 0.4
[    48.646]  X.Org Video Driver: 23.0
[    48.646]  X.Org XInput driver : 24.1
[    48.646]  X.Org Server Extension : 10.0
[    48.647] (++) using VT number 2

[    48.649] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    48.649] (II) xfree86: Adding drm device (/dev/dri/card0)
[    48.650] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    48.651] (--) PCI:*(0:9:0:0) 1002:699f:1da2:e367 rev 199, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe900000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    48.652] (II) LoadModule: "glx"
[    48.677] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    48.691] (II) Module glx: vendor="X.Org Foundation"
[    48.691]  compiled for 1.19.6, module version = 1.0.0
[    48.691]  ABI class: X.Org Server Extension, version 10.0
[    48.691] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[    48.691]  loading driver: amdgpu
[    48.691] (==) Matched amdgpu as autoconfigured driver 0
[    48.691] (==) Matched ati as autoconfigured driver 1
[    48.691] (==) Matched ati as autoconfigured driver 2
[    48.691] (==) Matched modesetting as autoconfigured driver 3
[    48.691] (==) Matched fbdev as autoconfigured driver 4
[    48.691] (==) Matched vesa as autoconfigured driver 5
[    48.691] (==) Assigned the driver to the xf86ConfigLayout
[    48.691] (II) LoadModule: "amdgpu"
[    48.692] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    48.702] (II) Module amdgpu: vendor="X.Org Foundation"
[    48.702]  compiled for 1.19.3, module version = 1.4.0
[    48.702]  Module class: X.Org Video Driver
[    48.702]  ABI class: X.Org Video Driver, version 23.0
[    48.702] (II) LoadModule: "ati"
[    48.702] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    48.712] (II) Module ati: vendor="X.Org Foundation"
[    48.712]  compiled for 1.19.3, module version = 7.10.0
[    48.712]  Module class: X.Org Video Driver
[    48.712]  ABI class: X.Org Video Driver, version 23.0
[    48.768] (II) LoadModule: "radeon"
[    48.768] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    48.787] (II) Module radeon: vendor="X.Org Foundation"
[    48.787]  compiled for 1.19.3, module version = 7.10.0
[    48.787]  Module class: X.Org Video Driver
[    48.787]  ABI class: X.Org Video Driver, version 23.0
[    48.787] (II) LoadModule: "modesetting"
[    48.788] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    48.797] (II) Module modesetting: vendor="X.Org Foundation"
[    48.797]  compiled for 1.19.6, module version = 1.19.6
[    48.797]  Module class: X.Org Video Driver
[    48.797]  ABI class: X.Org Video Driver, version 23.0
[    48.797] (II) LoadModule: "fbdev"
[    48.797] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    48.817] (II) Module fbdev: vendor="X.Org Foundation"
[    48.817]  compiled for 1.19.0, module version = 0.4.4
[    48.817]  Module class: X.Org Video Driver
[    48.817]  ABI class: X.Org Video Driver, version 23.0
[    48.817] (II) LoadModule: "vesa"
[    48.817] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    48.825] (II) Module vesa: vendor="X.Org Foundation"
[    48.825]  compiled for 1.19.0, module version = 2.3.4
[    48.825]  Module class: X.Org Video Driver
[    48.825]  ABI class: X.Org Video Driver, version 23.0
[    48.825] (II) AMDGPU: Driver for AMD Radeon:
  All GPUs supported by the amdgpu kernel driver
[    48.825] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
  ATI Radeon 9800PRO, ATI Radeon 9800XT,
  ATI Radeon Mobility 9600/9700 (M10/M11),
  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
  ATI FireGL V3350, ATI Mobility Radeon X1450,
  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
  ATI FireGL V3400, ATI Mobility FireGL V5250,
  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
  ATI FireGL V3600, ATI Radeon HD 2600 LE,
  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
  AMD Radeon HD 6300 Series Graphics,
  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
  AMD Firestream 9350, ATI Radeon HD 5800 Series,
  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
  MULLINS, KAVERI, HAWAII
[    48.829] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    48.829] (II) FBDEV: driver for framebuffer: fbdev
[    48.829] (II) VESA: driver for VESA chipsets: vesa
[    48.829] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    48.829] (II) [KMS] Kernel modesetting enabled.
[    48.830] (WW) Falling back to old probe method for modesetting
[    48.830] (WW) Falling back to old probe method for fbdev
[    48.830] (II) Loading sub module "fbdevhw"
[    48.830] (II) LoadModule: "fbdevhw"
[    48.830] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    48.842] (II) Module fbdevhw: vendor="X.Org Foundation"
[    48.842]  compiled for 1.19.6, module version = 0.0.2
[    48.842]  ABI class: X.Org Video Driver, version 23.0
[    48.842] (WW) Falling back to old probe method for vesa
[    48.842] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    48.842] (II) AMDGPU(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    48.842] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[    48.842] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    48.842] (==) AMDGPU(0): Default visual is TrueColor
[    48.842] (==) AMDGPU(0): RGB weight 888
[    48.842] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[    48.842] (--) AMDGPU(0): Chipset: "Radeon RX 550 Series" (ChipID = 0x699f)
[    48.842] (II) Loading sub module "fb"
[    48.842] (II) LoadModule: "fb"
[    48.842] (II) Loading /usr/lib/xorg/modules/libfb.so
[    48.857] (II) Module fb: vendor="X.Org Foundation"
[    48.857]  compiled for 1.19.6, module version = 1.0.0
[    48.857]  ABI class: X.Org ANSI C Emulation, version 0.4
[    48.857] (II) Loading sub module "dri2"
[    48.857] (II) LoadModule: "dri2"
[    48.857] (II) Module "dri2" already built-in
[    48.940] (II) Loading sub module "glamoregl"
[    48.940] (II) LoadModule: "glamoregl"
[    48.941] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    48.958] (II) Module glamoregl: vendor="X.Org Foundation"
[    48.958]  compiled for 1.19.6, module version = 1.0.0
[    48.958]  ABI class: X.Org ANSI C Emulation, version 0.4
[    48.958] (II) glamor: OpenGL accelerated X.org driver based.
[    48.961] (II) glamor: EGL version 1.5 (DRI2):
[    48.964] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[    48.964] (==) AMDGPU(0): TearFree property default: auto
[    48.964] (II) AMDGPU(0): KMS Pageflipping: enabled
[    48.982] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[    48.983] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[    49.021] (II) AMDGPU(0): Output DVI-D-0 has no monitor section
[    49.037] (II) AMDGPU(0): EDID for output DisplayPort-0
[    49.037] (II) AMDGPU(0): Manufacturer: HWP  Model: 2690  Serial#: 16843009
[    49.038] (II) AMDGPU(0): Year: 2010  Week: 2
[    49.038] (II) AMDGPU(0): EDID Version: 1.4
[    49.038] (II) AMDGPU(0): Digital Display Input
[    49.038] (II) AMDGPU(0): 8 bits per channel
[    49.038] (II) AMDGPU(0): Digital interface is DisplayPort
[    49.038] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 64  vert.: 40
[    49.038] (II) AMDGPU(0): Gamma: 2.20
[    49.038] (II) AMDGPU(0): DPMS capabilities: Off
[    49.038] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    49.038] (II) AMDGPU(0): First detailed timing is preferred mode
[    49.038] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[    49.038] (II) AMDGPU(0): redX: 0.658 redY: 0.324   greenX: 0.204 greenY: 0.665
[    49.038] (II) AMDGPU(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    49.038] (II) AMDGPU(0): Manufacturer's mask: 0
[    49.038] (II) AMDGPU(0): Supported detailed timing:
[    49.038] (II) AMDGPU(0): clock: 268.0 MHz   Image Size:  641 x 400 mm
[    49.038] (II) AMDGPU(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    49.038] (II) AMDGPU(0): v_active: 1600  v_sync: 1603  v_sync_end 1609 v_blanking: 1646 v_border: 0
[    49.038] (II) AMDGPU(0): Supported detailed timing:
[    49.038] (II) AMDGPU(0): clock: 71.0 MHz   Image Size:  641 x 400 mm
[    49.038] (II) AMDGPU(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    49.038] (II) AMDGPU(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    49.038] (II) AMDGPU(0): Monitor name: HP LP3065
[    49.038] (II) AMDGPU(0): Serial No: CZ40022025
[    49.038] (II) AMDGPU(0): EDID (in hex):
[    49.038] (II) AMDGPU(0):  00ffffffffffff0022f0902601010101
[    49.038] (II) AMDGPU(0):  02140104a54028782a8585a85334aa25
[    49.038] (II) AMDGPU(0):  12505400000001010101010101010101
[    49.038] (II) AMDGPU(0):  010101010101b06800a0a0402e603020
[    49.038] (II) AMDGPU(0):  360081902100001abc1b00a050201730
[    49.038] (II) AMDGPU(0):  3020360081902100001a000000fc0048
[    49.038] (II) AMDGPU(0):  50204c50333036350a202020000000ff
[    49.038] (II) AMDGPU(0):  00435a34303032323032350a202000ad
[    49.038] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[    49.038] (II) AMDGPU(0): Modeline "2560x1600"x59.9  268.00  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.5 kHz eP)
[    49.038] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    49.039] (II) AMDGPU(0): EDID for output HDMI-A-0
[    49.077] (II) AMDGPU(0): EDID for output DVI-D-0
[    49.077] (II) AMDGPU(0): Manufacturer: HWP  Model: 2690  Serial#: 16843009
[    49.077] (II) AMDGPU(0): Year: 2010  Week: 2
[    49.077] (II) AMDGPU(0): EDID Version: 1.3
[    49.077] (II) AMDGPU(0): Digital Display Input
[    49.077] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 64  vert.: 40
[    49.077] (II) AMDGPU(0): Gamma: 2.20
[    49.077] (II) AMDGPU(0): DPMS capabilities: Off
[    49.077] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    49.077] (II) AMDGPU(0): First detailed timing is preferred mode
[    49.077] (II) AMDGPU(0): redX: 0.658 redY: 0.324   greenX: 0.204 greenY: 0.665
[    49.077] (II) AMDGPU(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    49.077] (II) AMDGPU(0): Manufacturer's mask: 0
[    49.077] (II) AMDGPU(0): Supported detailed timing:
[    49.077] (II) AMDGPU(0): clock: 268.0 MHz   Image Size:  641 x 400 mm
[    49.077] (II) AMDGPU(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    49.077] (II) AMDGPU(0): v_active: 1600  v_sync: 1603  v_sync_end 1609 v_blanking: 1646 v_border: 0
[    49.077] (II) AMDGPU(0): Supported detailed timing:
[    49.077] (II) AMDGPU(0): clock: 71.0 MHz   Image Size:  641 x 400 mm
[    49.077] (II) AMDGPU(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    49.077] (II) AMDGPU(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    49.077] (II) AMDGPU(0): Monitor name: HP LP3065
[    49.077] (II) AMDGPU(0): Serial No: CZ40021952
[    49.077] (II) AMDGPU(0): EDID (in hex):
[    49.077] (II) AMDGPU(0):  00ffffffffffff0022f0902601010101
[    49.077] (II) AMDGPU(0):  02140103804028782a8585a85334aa25
[    49.077] (II) AMDGPU(0):  12505400000001010101010101010101
[    49.077] (II) AMDGPU(0):  010101010101b06800a0a0402e603020
[    49.077] (II) AMDGPU(0):  360081902100001abc1b00a050201730
[    49.077] (II) AMDGPU(0):  3020360081902100001a000000fc0048
[    49.077] (II) AMDGPU(0):  50204c50333036350a202020000000ff
[    49.077] (II) AMDGPU(0):  00435a34303032313935320a202000cb
[    49.077] (II) AMDGPU(0): Printing probed modes for output DVI-D-0
[    49.077] (II) AMDGPU(0): Modeline "2560x1600"x59.9  268.00  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.5 kHz eP)
[    49.077] (II) AMDGPU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    49.077] (II) AMDGPU(0): Output DisplayPort-0 connected
[    49.077] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[    49.077] (II) AMDGPU(0): Output DVI-D-0 connected
[    49.077] (II) AMDGPU(0): Using spanning desktop for initial modes
[    49.077] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 2560x1600 +0+0
[    49.077] (II) AMDGPU(0): Output DVI-D-0 using initial mode 2560x1600 +2560+0
[    49.077] (II) AMDGPU(0): mem size init: gart size :ffd37000 vram size: s:fcbe0000 visible:ec60000
[    49.077] (==) AMDGPU(0): DPI set to (96, 96)
[    49.077] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[    49.077] (II) Loading sub module "ramdac"
[    49.077] (II) LoadModule: "ramdac"
[    49.077] (II) Module "ramdac" already built-in
[    49.077] (II) UnloadModule: "radeon"
[    49.077] (II) Unloading radeon
[    49.077] (II) UnloadModule: "modesetting"
[    49.078] (II) Unloading modesetting
[    49.078] (II) UnloadModule: "fbdev"
[    49.078] (II) Unloading fbdev
[    49.078] (II) UnloadSubModule: "fbdevhw"
[    49.078] (II) Unloading fbdevhw
[    49.078] (II) UnloadModule: "vesa"
[    49.078] (II) Unloading vesa
[    49.078] (--) Depth 24 pixmap format is 32 bpp
[    49.085] (II) AMDGPU(0): [DRI2] Setup complete
[    49.085] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[    49.085] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[    49.086] (II) AMDGPU(0): Front buffer pitch: 20480 bytes
[    49.095] (II) AMDGPU(0): SYNC extension fences enabled
[    49.096] (II) AMDGPU(0): Present extension enabled
[    49.096] (==) AMDGPU(0): DRI3 enabled
[    49.096] (==) AMDGPU(0): Backing store enabled
[    49.096] (II) AMDGPU(0): Direct rendering enabled
[    49.418] (II) AMDGPU(0): Use GLAMOR acceleration.
[    49.418] (II) AMDGPU(0): Acceleration enabled
[    49.418] (==) AMDGPU(0): DPMS enabled
[    49.418] (==) AMDGPU(0): Silken mouse enabled
[    49.418] (II) AMDGPU(0): Set up textured video (glamor)
[    49.418] (II) AMDGPU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    49.520] (--) RandR disabled
[    49.523] (II) SELinux: Disabled on system
[    49.524] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    49.524] (II) AIGLX: enabled GLX_ARB_create_context
[    49.524] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    49.524] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    49.524] (II) AIGLX: enabled GLX_INTEL_swap_event
[    49.524] (II) AIGLX: enabled GLX_SGI_swap_control
[    49.524] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    49.524] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    49.524] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    49.524] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    49.524] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    49.525] (II) AIGLX: Loaded and initialized radeonsi
[    49.525] (II) GLX: Initialized DRI2 GL provider for screen 0
[    49.527] (II) AMDGPU(0): Setting screen physical size to 1354 x 423
[    49.667] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    49.667] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    49.667] (II) LoadModule: "libinput"
[    49.667] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    49.687] (II) Module libinput: vendor="X.Org Foundation"
[    49.687]  compiled for 1.19.3, module version = 0.26.0
[    49.687]  Module class: X.Org XInput Driver
[    49.687]  ABI class: X.Org XInput driver, version 24.1
[    49.687] (II) Using input driver 'libinput' for 'Power Button'
[    49.688] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 25 paused 0
[    49.688] (**) Power Button: always reports core events
[    49.688] (**) Option "Device" "/dev/input/event4"
[    49.688] (**) Option "_source" "server/udev"
[    49.688] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    49.688] (II) event4  - (II) Power Button: (II) device is a keyboard
[    49.688] (II) event4  - (II) Power Button: (II) device removed
[    49.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    49.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    49.688] (**) Option "xkb_model" "pc105"
[    49.688] (**) Option "xkb_layout" "fr"
[    49.688] (**) Option "xkb_variant" "latin9"
[    49.708] (II) event4  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    49.708] (II) event4  - (II) Power Button: (II) device is a keyboard
[    49.709] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    49.709] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    49.709] (II) Using input driver 'libinput' for 'Power Button'
[    49.709] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[    49.709] (**) Power Button: always reports core events
[    49.709] (**) Option "Device" "/dev/input/event3"
[    49.709] (**) Option "_source" "server/udev"
[    49.710] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    49.710] (II) event3  - (II) Power Button: (II) device is a keyboard
[    49.710] (II) event3  - (II) Power Button: (II) device removed
[    49.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    49.710] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    49.710] (**) Option "xkb_model" "pc105"
[    49.710] (**) Option "xkb_layout" "fr"
[    49.710] (**) Option "xkb_variant" "latin9"
[    49.710] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    49.710] (II) event3  - (II) Power Button: (II) device is a keyboard
[    49.711] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event10)
[    49.711] (II) No input driver specified, ignoring this device.
[    49.711] (II) This device may have been added with another device file.
[    49.711] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[    49.711] (II) No input driver specified, ignoring this device.
[    49.711] (II) This device may have been added with another device file.
[    49.711] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event7)
[    49.712] (II) No input driver specified, ignoring this device.
[    49.712] (II) This device may have been added with another device file.
[    49.712] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event8)
[    49.712] (II) No input driver specified, ignoring this device.
[    49.712] (II) This device may have been added with another device file.
[    49.712] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event9)
[    49.712] (II) No input driver specified, ignoring this device.
[    49.712] (II) This device may have been added with another device file.
[    49.713] (II) config/udev: Adding input device HP Webcam HD 4310: HP Webcam HD (/dev/input/event18)
[    49.713] (**) HP Webcam HD 4310: HP Webcam HD: Applying InputClass "libinput keyboard catchall"
[    49.713] (II) Using input driver 'libinput' for 'HP Webcam HD 4310: HP Webcam HD'
[    49.713] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 29 paused 0
[    49.713] (**) HP Webcam HD 4310: HP Webcam HD: always reports core events
[    49.713] (**) Option "Device" "/dev/input/event18"
[    49.713] (**) Option "_source" "server/udev"
[    49.714] (II) event18 - (II) HP Webcam HD 4310: HP Webcam HD: (II) is tagged by udev as: Keyboard
[    49.714] (II) event18 - (II) HP Webcam HD 4310: HP Webcam HD: (II) device is a keyboard
[    49.714] (II) event18 - (II) HP Webcam HD 4310: HP Webcam HD: (II) device removed
[    49.714] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-1/5-1:1.0/input/input18/event18"
[    49.714] (II) XINPUT: Adding extended input device "HP Webcam HD 4310: HP Webcam HD" (type: KEYBOARD, id 8)
[    49.714] (**) Option "xkb_model" "pc105"
[    49.714] (**) Option "xkb_layout" "fr"
[    49.714] (**) Option "xkb_variant" "latin9"
[    49.714] (II) event18 - (II) HP Webcam HD 4310: HP Webcam HD: (II) is tagged by udev as: Keyboard
[    49.714] (II) event18 - (II) HP Webcam HD 4310: HP Webcam HD: (II) device is a keyboard
[    49.715] (II) config/udev: Adding input device Logitech M310 (/dev/input/event0)
[    49.715] (**) Logitech M310: Applying InputClass "libinput pointer catchall"
[    49.715] (II) Using input driver 'libinput' for 'Logitech M310'
[    49.716] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 30 paused 0
[    49.716] (**) Logitech M310: always reports core events
[    49.716] (**) Option "Device" "/dev/input/event0"
[    49.716] (**) Option "_source" "server/udev"
[    49.716] (II) event0  - (II) Logitech M310: (II) is tagged by udev as: Mouse
[    49.716] (II) event0  - (II) Logitech M310: (II) device set to 1100 DPI
[    49.716] (II) event0  - (II) Logitech M310: (II) device is a pointer
[    49.716] (II) event0  - (II) Logitech M310: (II) device removed
[    49.716] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-3/5-3:1.2/0003:046D:C52B.0004/0003:046D:1024.0005/input/input0/event0"
[    49.716] (II) XINPUT: Adding extended input device "Logitech M310" (type: MOUSE, id 9)
[    49.716] (**) Option "AccelerationScheme" "none"
[    49.717] (**) Logitech M310: (accel) selected scheme none/0
[    49.717] (**) Logitech M310: (accel) acceleration factor: 2.000
[    49.717] (**) Logitech M310: (accel) acceleration threshold: 4
[    49.717] (II) event0  - (II) Logitech M310: (II) is tagged by udev as: Mouse
[    49.717] (II) event0  - (II) Logitech M310: (II) device set to 1100 DPI
[    49.717] (II) event0  - (II) Logitech M310: (II) device is a pointer
[    49.717] (II) config/udev: Adding input device Logitech M310 (/dev/input/mouse0)
[    49.717] (II) No input driver specified, ignoring this device.
[    49.717] (II) This device may have been added with another device file.
[    49.718] (II) config/udev: Adding input device Logitech K520 (/dev/input/event1)
[    49.718] (**) Logitech K520: Applying InputClass "libinput keyboard catchall"
[    49.718] (II) Using input driver 'libinput' for 'Logitech K520'
[    49.719] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
[    49.719] (**) Logitech K520: always reports core events
[    49.719] (**) Option "Device" "/dev/input/event1"
[    49.719] (**) Option "_source" "server/udev"
[    49.719] (II) event1  - (II) Logitech K520: (II) is tagged by udev as: Keyboard
[    49.719] (II) event1  - (II) Logitech K520: (II) device is a keyboard
[    49.719] (II) event1  - (II) Logitech K520: (II) device removed
[    49.720] (II) libinput: Logitech K520: needs a virtual subdevice
[    49.720] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-3/5-3:1.2/0003:046D:C52B.0004/0003:046D:2011.0006/input/input1/event1"
[    49.720] (II) XINPUT: Adding extended input device "Logitech K520" (type: MOUSE, id 10)
[    49.720] (**) Option "AccelerationScheme" "none"
[    49.720] (**) Logitech K520: (accel) selected scheme none/0
[    49.720] (**) Logitech K520: (accel) acceleration factor: 2.000
[    49.720] (**) Logitech K520: (accel) acceleration threshold: 4
[    49.720] (II) event1  - (II) Logitech K520: (II) is tagged by udev as: Keyboard
[    49.720] (II) event1  - (II) Logitech K520: (II) device is a keyboard
[    49.721] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event11)
[    49.721] (II) No input driver specified, ignoring this device.
[    49.721] (II) This device may have been added with another device file.
[    49.721] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event12)
[    49.721] (II) No input driver specified, ignoring this device.
[    49.721] (II) This device may have been added with another device file.
[    49.721] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event13)
[    49.721] (II) No input driver specified, ignoring this device.
[    49.721] (II) This device may have been added with another device file.
[    49.721] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event14)
[    49.721] (II) No input driver specified, ignoring this device.
[    49.721] (II) This device may have been added with another device file.
[    49.722] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event15)
[    49.722] (II) No input driver specified, ignoring this device.
[    49.722] (II) This device may have been added with another device file.
[    49.722] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event16)
[    49.722] (II) No input driver specified, ignoring this device.
[    49.722] (II) This device may have been added with another device file.
[    49.722] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event17)
[    49.722] (II) No input driver specified, ignoring this device.
[    49.722] (II) This device may have been added with another device file.
[    49.723] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[    49.723] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    49.723] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    49.723] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 32 paused 0
[    49.723] (**) Eee PC WMI hotkeys: always reports core events
[    49.723] (**) Option "Device" "/dev/input/event5"
[    49.723] (**) Option "_source" "server/udev"
[    49.723] (II) event5  - (II) Eee PC WMI hotkeys: (II) is tagged by udev as: Keyboard
[    49.723] (II) event5  - (II) Eee PC WMI hotkeys: (II) device is a keyboard
[    49.723] (II) event5  - (II) Eee PC WMI hotkeys: (II) device removed
[    49.723] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input5/event5"
[    49.723] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[    49.723] (**) Option "xkb_model" "pc105"
[    49.724] (**) Option "xkb_layout" "fr"
[    49.724] (**) Option "xkb_variant" "latin9"
[    49.724] (II) event5  - (II) Eee PC WMI hotkeys: (II) is tagged by udev as: Keyboard
[    49.724] (II) event5  - (II) Eee PC WMI hotkeys: (II) device is a keyboard
[    49.724] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    49.724] (II) No input driver specified, ignoring this device.
[    49.724] (II) This device may have been added with another device file.
[    49.724] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[    49.724] (II) No input driver specified, ignoring this device.
[    49.724] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/console)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.725] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[    49.725] (II) No input driver specified, ignoring this device.
[    49.725] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.726] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[    49.726] (II) No input driver specified, ignoring this device.
[    49.726] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.727] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[    49.727] (II) No input driver specified, ignoring this device.
[    49.727] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.728] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[    49.728] (II) No input driver specified, ignoring this device.
[    49.728] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.729] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[    49.729] (II) No input driver specified, ignoring this device.
[    49.729] (II) This device may have been added with another device file.
[    49.730] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[    49.730] (II) No input driver specified, ignoring this device.
[    49.730] (II) This device may have been added with another device file.
[    49.730] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[    49.730] (II) No input driver specified, ignoring this device.
[    49.730] (II) This device may have been added with another device file.
[    49.730] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[    49.730] (II) No input driver specified, ignoring this device.
[    49.730] (II) This device may have been added with another device file.
[    49.730] (**) Logitech K520: Applying InputClass "libinput keyboard catchall"
[    49.730] (II) Using input driver 'libinput' for 'Logitech K520'
[    49.730] (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65
[    49.730] (**) Logitech K520: always reports core events
[    49.730] (**) Option "Device" "/dev/input/event1"
[    49.730] (**) Option "_source" "_driver/libinput"
[    49.730] (II) libinput: Logitech K520: is a virtual subdevice
[    49.730] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-3/5-3:1.2/0003:046D:C52B.0004/0003:046D:2011.0006/input/input1/event1"
[    49.730] (II) XINPUT: Adding extended input device "Logitech K520" (type: KEYBOARD, id 12)
[    49.730] (**) Option "xkb_model" "pc105"
[    49.730] (**) Option "xkb_layout" "fr"
[    49.730] (**) Option "xkb_variant" "latin9"
[    51.981] (II) AMDGPU(0): EDID vendor "HWP", prod id 9872
[    51.981] (II) AMDGPU(0): Printing DDC gathered Modelines:
[    51.981] (II) AMDGPU(0): Modeline "2560x1600"x0.0  268.00  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.5 kHz eP)
[    51.981] (II) AMDGPU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[  7470.803] (II) event0  - (II) Logitech M310: (II) Enabling spurious button debouncing, see https://wayland.freedesktop.org/libinput/doc/1.9.4/button_debouncing.html for details



mon Xorg.0.log avec stretch (stable) :
ma distribution (stable) :

~$ uname -a


Linux Alain-stretch 4.14.0-0.bpo.3-amd64 #1 SMP Debian 4.14.13-1~bpo9+1 (2018-01-14) x86_64 GNU/Linux


mon Xorg (stable) :


[    53.462] (--) Log file renamed from "/home/alain-stretch/.local/share/xorg/Xorg.pid-1307.log" to "/home/alain-stretch/.local/share/xorg/Xorg.0.log"
[    53.463]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    53.463] X Protocol Version 11, Revision 0
[    53.463] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[    53.463] Current Operating System: Linux Alain-stretch 4.14.0-0.bpo.3-amd64 #1 SMP Debian 4.14.13-1~bpo9+1 (2018-01-14) x86_64
[    53.463] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-0.bpo.3-amd64 root=UUID=df17331a-73c9-4fd9-929f-2b11f03887aa ro panic=10 nouveau.modeset=0 quiet
[    53.463] Build Date: 16 October 2017  08:19:45AM
[    53.463] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support)
[    53.463] Current version of pixman: 0.34.0
[    53.463]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[    53.463] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    53.463] (==) Log file: "/home/alain-stretch/.local/share/xorg/Xorg.0.log", Time: Sun Feb  4 21:16:09 2018
[    53.482] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    53.524] (==) No Layout section.  Using the first Screen section.
[    53.524] (==) No screen section available. Using defaults.
[    53.524] (**) |-->Screen "Default Screen Section" (0)
[    53.524] (**) |   |-->Monitor "<default monitor>"
[    53.525] (==) No monitor specified for screen "Default Screen Section".
  Using a default monitor configuration.
[    53.525] (==) Automatically adding devices
[    53.525] (==) Automatically enabling devices
[    53.525] (==) Automatically adding GPU devices
[    53.525] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    53.525] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    53.525]  Entry deleted from font path.
[    53.525] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[    53.525] (==) ModulePath set to "/usr/lib/xorg/modules"
[    53.525] (II) The server relies on udev to provide the list of input devices.
  If no devices become available, reconfigure udev or disable AutoAddDevices.
[    53.525] (II) Loader magic: 0x55db25bcfe00
[    53.525] (II) Module ABI versions:
[    53.525]  X.Org ANSI C Emulation: 0.4
[    53.525]  X.Org Video Driver: 23.0
[    53.525]  X.Org XInput driver : 24.1
[    53.525]  X.Org Server Extension : 10.0
[    53.526] (++) using VT number 2

[    53.527] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    53.527] (II) xfree86: Adding drm device (/dev/dri/card0)
[    53.528] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[    53.529] (--) PCI:*(0:9:0:0) 1002:699f:1da2:e367 rev 199, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfe900000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    53.529] (II) LoadModule: "glx"
[    53.543] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    53.576] (II) Module glx: vendor="X.Org Foundation"
[    53.576]  compiled for 1.19.2, module version = 1.0.0
[    53.576]  ABI class: X.Org Server Extension, version 10.0
[    53.576] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0
[    53.576]  loading driver: amdgpu
[    53.576] (==) Matched amdgpu as autoconfigured driver 0
[    53.576] (==) Matched ati as autoconfigured driver 1
[    53.576] (==) Matched ati as autoconfigured driver 2
[    53.576] (==) Matched modesetting as autoconfigured driver 3
[    53.576] (==) Matched fbdev as autoconfigured driver 4
[    53.576] (==) Matched vesa as autoconfigured driver 5
[    53.576] (==) Assigned the driver to the xf86ConfigLayout
[    53.576] (II) LoadModule: "amdgpu"
[    53.576] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[    53.584] (II) Module amdgpu: vendor="X.Org Foundation"
[    53.584]  compiled for 1.19.0, module version = 1.2.0
[    53.584]  Module class: X.Org Video Driver
[    53.584]  ABI class: X.Org Video Driver, version 23.0
[    53.584] (II) LoadModule: "ati"
[    53.584] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    53.604] (II) Module ati: vendor="X.Org Foundation"
[    53.604]  compiled for 1.19.0, module version = 7.8.0
[    53.604]  Module class: X.Org Video Driver
[    53.604]  ABI class: X.Org Video Driver, version 23.0
[    53.604] (II) LoadModule: "radeon"
[    53.604] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    53.627] (II) Module radeon: vendor="X.Org Foundation"
[    53.627]  compiled for 1.19.0, module version = 7.8.0
[    53.627]  Module class: X.Org Video Driver
[    53.627]  ABI class: X.Org Video Driver, version 23.0
[    53.627] (II) LoadModule: "modesetting"
[    53.627] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    53.628] (II) Module modesetting: vendor="X.Org Foundation"
[    53.629]  compiled for 1.19.2, module version = 1.19.2
[    53.629]  Module class: X.Org Video Driver
[    53.629]  ABI class: X.Org Video Driver, version 23.0
[    53.629] (II) LoadModule: "fbdev"
[    53.629] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    53.629] (II) Module fbdev: vendor="X.Org Foundation"
[    53.629]  compiled for 1.19.0, module version = 0.4.4
[    53.629]  Module class: X.Org Video Driver
[    53.629]  ABI class: X.Org Video Driver, version 23.0
[    53.629] (II) LoadModule: "vesa"
[    53.629] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    53.647] (II) Module vesa: vendor="X.Org Foundation"
[    53.647]  compiled for 1.19.0, module version = 2.3.4
[    53.647]  Module class: X.Org Video Driver
[    53.647]  ABI class: X.Org Video Driver, version 23.0
[    53.647] (II) AMDGPU: Driver for AMD Radeon chipsets: OLAND, HAINAN, TAHITI,
  PITCAIRN, VERDE, BONAIRE, KABINI, MULLINS, KAVERI, HAWAII, TOPAZ,
  TONGA, CARRIZO, FIJI, STONEY, POLARIS11, POLARIS10
[    53.647] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
  ATI Radeon 9800PRO, ATI Radeon 9800XT,
  ATI Radeon Mobility 9600/9700 (M10/M11),
  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
  ATI FireGL V3350, ATI Mobility Radeon X1450,
  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
  ATI FireGL V3400, ATI Mobility FireGL V5250,
  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
  ATI FireGL V3600, ATI Radeon HD 2600 LE,
  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
  AMD Radeon HD 6300 Series Graphics,
  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
  AMD Firestream 9350, ATI Radeon HD 5800 Series,
  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
  MULLINS, KAVERI, HAWAII
[    53.657] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    53.657] (II) FBDEV: driver for framebuffer: fbdev
[    53.657] (II) VESA: driver for VESA chipsets: vesa
[    53.657] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    53.657] (II) modeset(0): using drv /dev/dri/card0
[    53.657] (WW) Falling back to old probe method for fbdev
[    53.657] (II) Loading sub module "fbdevhw"
[    53.657] (II) LoadModule: "fbdevhw"
[    53.658] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    53.669] (II) Module fbdevhw: vendor="X.Org Foundation"
[    53.669]  compiled for 1.19.2, module version = 0.0.2
[    53.669]  ABI class: X.Org Video Driver, version 23.0
[    53.669] (WW) Falling back to old probe method for vesa
[    53.669] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    53.669] (II) modeset(0): Creating default Display subsection in Screen section
  "Default Screen Section" for depth/fbbpp 24/32
[    53.669] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    53.669] (==) modeset(0): RGB weight 888
[    53.669] (==) modeset(0): Default visual is TrueColor
[    53.669] (II) Loading sub module "glamoregl"
[    53.669] (II) LoadModule: "glamoregl"
[    53.669] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    53.673] (II) Module glamoregl: vendor="X.Org Foundation"
[    53.673]  compiled for 1.19.2, module version = 1.0.0
[    53.673]  ABI class: X.Org ANSI C Emulation, version 0.4
[    53.673] (II) glamor: OpenGL accelerated X.org driver based.
[    53.699] (II) glamor: EGL version 1.4 (DRI2):
[    53.699] EGL_MESA_drm_image required.
[    53.700] (EE) modeset(0): glamor initialization failed
[    53.700] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[    53.700] (II) modeset(0): Double-buffered shadow updates: off
[    53.717] (II) modeset(0): Output DP-1 has no monitor section
[    53.719] (II) modeset(0): Output HDMI-1 has no monitor section
[    53.756] (II) modeset(0): Output DVI-D-1 has no monitor section
[    53.777] (II) modeset(0): EDID for output DP-1
[    53.777] (II) modeset(0): Manufacturer: HWP  Model: 2690  Serial#: 16843009
[    53.777] (II) modeset(0): Year: 2010  Week: 2
[    53.777] (II) modeset(0): EDID Version: 1.4
[    53.777] (II) modeset(0): Digital Display Input
[    53.777] (II) modeset(0): 8 bits per channel
[    53.777] (II) modeset(0): Digital interface is DisplayPort
[    53.777] (II) modeset(0): Max Image Size [cm]: horiz.: 64  vert.: 40
[    53.777] (II) modeset(0): Gamma: 2.20
[    53.777] (II) modeset(0): DPMS capabilities: Off
[    53.777] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    53.777] (II) modeset(0): First detailed timing is preferred mode
[    53.778] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    53.778] (II) modeset(0): redX: 0.658 redY: 0.324   greenX: 0.204 greenY: 0.665
[    53.778] (II) modeset(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    53.778] (II) modeset(0): Manufacturer's mask: 0
[    53.778] (II) modeset(0): Supported detailed timing:
[    53.778] (II) modeset(0): clock: 268.0 MHz   Image Size:  641 x 400 mm
[    53.778] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    53.778] (II) modeset(0): v_active: 1600  v_sync: 1603  v_sync_end 1609 v_blanking: 1646 v_border: 0
[    53.778] (II) modeset(0): Supported detailed timing:
[    53.778] (II) modeset(0): clock: 71.0 MHz   Image Size:  641 x 400 mm
[    53.778] (II) modeset(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    53.778] (II) modeset(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    53.778] (II) modeset(0): Monitor name: HP LP3065
[    53.778] (II) modeset(0): Serial No: CZ40022025
[    53.778] (II) modeset(0): EDID (in hex):
[    53.778] (II) modeset(0):   00ffffffffffff0022f0902601010101
[    53.778] (II) modeset(0):   02140104a54028782a8585a85334aa25
[    53.778] (II) modeset(0):   12505400000001010101010101010101
[    53.778] (II) modeset(0):   010101010101b06800a0a0402e603020
[    53.778] (II) modeset(0):   360081902100001abc1b00a050201730
[    53.778] (II) modeset(0):   3020360081902100001a000000fc0048
[    53.778] (II) modeset(0):   50204c50333036350a202020000000ff
[    53.778] (II) modeset(0):   00435a34303032323032350a202000ad
[    53.778] (II) modeset(0): Printing probed modes for output DP-1
[    53.778] (II) modeset(0): Modeline "2560x1600"x59.9  268.00  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.5 kHz eP)
[    53.778] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    53.778] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    53.778] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    53.778] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    53.778] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[    53.778] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    53.778] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    53.778] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    53.778] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    53.778] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    53.778] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    53.778] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    53.778] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    53.778] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    53.778] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    53.778] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    53.778] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    53.778] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    53.778] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    53.778] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    53.778] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    53.778] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    53.778] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    53.778] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    53.778] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    53.778] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    53.778] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    53.778] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    53.778] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    53.778] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    53.778] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    53.778] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    53.778] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    53.778] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    53.778] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    53.778] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    53.778] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    53.778] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    53.778] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    53.778] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    53.778] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    53.778] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    53.778] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    53.779] (II) modeset(0): EDID for output HDMI-1
[    53.816] (II) modeset(0): EDID for output DVI-D-1
[    53.816] (II) modeset(0): Manufacturer: HWP  Model: 2690  Serial#: 16843009
[    53.816] (II) modeset(0): Year: 2010  Week: 2
[    53.816] (II) modeset(0): EDID Version: 1.3
[    53.816] (II) modeset(0): Digital Display Input
[    53.816] (II) modeset(0): Max Image Size [cm]: horiz.: 64  vert.: 40
[    53.817] (II) modeset(0): Gamma: 2.20
[    53.817] (II) modeset(0): DPMS capabilities: Off
[    53.817] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    53.817] (II) modeset(0): First detailed timing is preferred mode
[    53.817] (II) modeset(0): redX: 0.658 redY: 0.324   greenX: 0.204 greenY: 0.665
[    53.817] (II) modeset(0): blueX: 0.146 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    53.817] (II) modeset(0): Manufacturer's mask: 0
[    53.817] (II) modeset(0): Supported detailed timing:
[    53.817] (II) modeset(0): clock: 268.0 MHz   Image Size:  641 x 400 mm
[    53.817] (II) modeset(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    53.817] (II) modeset(0): v_active: 1600  v_sync: 1603  v_sync_end 1609 v_blanking: 1646 v_border: 0
[    53.817] (II) modeset(0): Supported detailed timing:
[    53.817] (II) modeset(0): clock: 71.0 MHz   Image Size:  641 x 400 mm
[    53.817] (II) modeset(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    53.817] (II) modeset(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    53.817] (II) modeset(0): Monitor name: HP LP3065
[    53.817] (II) modeset(0): Serial No: CZ40021952
[    53.817] (II) modeset(0): EDID (in hex):
[    53.817] (II) modeset(0):   00ffffffffffff0022f0902601010101
[    53.817] (II) modeset(0):   02140103804028782a8585a85334aa25
[    53.817] (II) modeset(0):   12505400000001010101010101010101
[    53.817] (II) modeset(0):   010101010101b06800a0a0402e603020
[    53.817] (II) modeset(0):   360081902100001abc1b00a050201730
[    53.817] (II) modeset(0):   3020360081902100001a000000fc0048
[    53.817] (II) modeset(0):   50204c50333036350a202020000000ff
[    53.817] (II) modeset(0):   00435a34303032313935320a202000cb
[    53.817] (II) modeset(0): Printing probed modes for output DVI-D-1
[    53.817] (II) modeset(0): Modeline "2560x1600"x59.9  268.00  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.5 kHz eP)
[    53.817] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    53.817] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    53.817] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    53.817] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    53.817] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[    53.817] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    53.817] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    53.817] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    53.817] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    53.817] (II) modeset(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[    53.817] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    53.817] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    53.817] (II) modeset(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz d)
[    53.817] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    53.817] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    53.817] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    53.817] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    53.817] (II) modeset(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz d)
[    53.817] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    53.817] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    53.817] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    53.817] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    53.817] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    53.817] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    53.817] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    53.817] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    53.817] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    53.817] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    53.817] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    53.817] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    53.817] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    53.817] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    53.817] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    53.817] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    53.817] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    53.817] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    53.817] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    53.817] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    53.817] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    53.817] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    53.817] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    53.817] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    53.817] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    53.817] (II) modeset(0): Output DP-1 connected
[    53.817] (II) modeset(0): Output HDMI-1 disconnected
[    53.817] (II) modeset(0): Output DVI-D-1 connected
[    53.817] (II) modeset(0): Using spanning desktop for initial modes
[    53.817] (II) modeset(0): Output DP-1 using initial mode 2560x1600 +0+0
[    53.817] (II) modeset(0): Output DVI-D-1 using initial mode 2560x1600 +2560+0
[    53.817] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    53.817] (==) modeset(0): DPI set to (96, 96)
[    53.817] (II) Loading sub module "fb"
[    53.817] (II) LoadModule: "fb"
[    53.817] (II) Loading /usr/lib/xorg/modules/libfb.so
[    53.843] (II) Module fb: vendor="X.Org Foundation"
[    53.843]  compiled for 1.19.2, module version = 1.0.0
[    53.843]  ABI class: X.Org ANSI C Emulation, version 0.4
[    53.843] (II) Loading sub module "shadow"
[    53.843] (II) LoadModule: "shadow"
[    53.843] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    53.844] (II) Module shadow: vendor="X.Org Foundation"
[    53.844]  compiled for 1.19.2, module version = 1.1.0
[    53.844]  ABI class: X.Org ANSI C Emulation, version 0.4
[    53.844] (II) UnloadModule: "amdgpu"
[    53.844] (II) Unloading amdgpu
[    53.844] (II) UnloadModule: "radeon"
[    53.844] (II) Unloading radeon
[    53.844] (II) UnloadModule: "fbdev"
[    53.844] (II) Unloading fbdev
[    53.844] (II) UnloadSubModule: "fbdevhw"
[    53.844] (II) Unloading fbdevhw
[    53.844] (II) UnloadModule: "vesa"
[    53.844] (II) Unloading vesa
[    53.844] (==) Depth 24 pixmap format is 32 bpp
[    53.852] (==) modeset(0): Backing store enabled
[    53.852] (==) modeset(0): Silken mouse enabled
[    53.852] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    53.852] (==) modeset(0): DPMS enabled
[    53.852] (--) RandR disabled
[    53.856] (II) SELinux: Disabled on system
[    53.857] (II) AIGLX: Screen 0 is not DRI2 capable
[    53.857] (EE) AIGLX: reverting to software rendering
[    53.858] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[    53.859] (II) IGLX: Loaded and initialized swrast
[    53.859] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    53.859] (II) modeset(0): Damage tracking initialized
[    53.859] (II) modeset(0): Setting screen physical size to 1354 x 423
[    53.896] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    53.896] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    53.896] (II) LoadModule: "libinput"
[    53.897] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    53.909] (II) Module libinput: vendor="X.Org Foundation"
[    53.909]  compiled for 1.19.0, module version = 0.23.0
[    53.909]  Module class: X.Org XInput Driver
[    53.909]  ABI class: X.Org XInput driver, version 24.1
[    53.909] (II) Using input driver 'libinput' for 'Power Button'
[    53.910] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 20 paused 0
[    53.910] (**) Power Button: always reports core events
[    53.910] (**) Option "Device" "/dev/input/event3"
[    53.910] (**) Option "_source" "server/udev"
[    53.910] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    53.910] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    53.910] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    53.910] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    53.910] (**) Option "xkb_model" "pc105"
[    53.910] (**) Option "xkb_layout" "fr"
[    53.910] (**) Option "xkb_variant" "latin9"
[    53.925] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    53.925] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    53.926] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    53.926] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    53.926] (II) Using input driver 'libinput' for 'Power Button'
[    53.926] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 23 paused 0
[    53.926] (**) Power Button: always reports core events
[    53.926] (**) Option "Device" "/dev/input/event2"
[    53.926] (**) Option "_source" "server/udev"
[    53.926] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    53.926] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    53.926] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    53.926] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    53.926] (**) Option "xkb_model" "pc105"
[    53.926] (**) Option "xkb_layout" "fr"
[    53.927] (**) Option "xkb_variant" "latin9"
[    53.927] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    53.927] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    53.927] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event10)
[    53.927] (II) No input driver specified, ignoring this device.
[    53.927] (II) This device may have been added with another device file.
[    53.928] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event11)
[    53.928] (II) No input driver specified, ignoring this device.
[    53.928] (II) This device may have been added with another device file.
[    53.928] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[    53.928] (II) No input driver specified, ignoring this device.
[    53.928] (II) This device may have been added with another device file.
[    53.928] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event8)
[    53.928] (II) No input driver specified, ignoring this device.
[    53.928] (II) This device may have been added with another device file.
[    53.928] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event9)
[    53.928] (II) No input driver specified, ignoring this device.
[    53.928] (II) This device may have been added with another device file.
[    53.929] (II) config/udev: Adding input device HP Webcam HD 4310: HP Webcam HD (/dev/input/event6)
[    53.929] (**) HP Webcam HD 4310: HP Webcam HD: Applying InputClass "libinput keyboard catchall"
[    53.929] (II) Using input driver 'libinput' for 'HP Webcam HD 4310: HP Webcam HD'
[    53.929] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 24 paused 0
[    53.929] (**) HP Webcam HD 4310: HP Webcam HD: always reports core events
[    53.929] (**) Option "Device" "/dev/input/event6"
[    53.929] (**) Option "_source" "server/udev"
[    53.929] (II) input device 'HP Webcam HD 4310: HP Webcam HD', /dev/input/event6 is tagged by udev as: Keyboard
[    53.929] (II) input device 'HP Webcam HD 4310: HP Webcam HD', /dev/input/event6 is a keyboard
[    53.929] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-1/5-1:1.0/input/input6/event6"
[    53.929] (II) XINPUT: Adding extended input device "HP Webcam HD 4310: HP Webcam HD" (type: KEYBOARD, id 8)
[    53.929] (**) Option "xkb_model" "pc105"
[    53.929] (**) Option "xkb_layout" "fr"
[    53.929] (**) Option "xkb_variant" "latin9"
[    53.930] (II) input device 'HP Webcam HD 4310: HP Webcam HD', /dev/input/event6 is tagged by udev as: Keyboard
[    53.930] (II) input device 'HP Webcam HD 4310: HP Webcam HD', /dev/input/event6 is a keyboard
[    53.930] (II) config/udev: Adding input device Logitech M310 (/dev/input/event0)
[    53.930] (**) Logitech M310: Applying InputClass "libinput pointer catchall"
[    53.930] (II) Using input driver 'libinput' for 'Logitech M310'
[    53.930] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
[    53.930] (**) Logitech M310: always reports core events
[    53.930] (**) Option "Device" "/dev/input/event0"
[    53.930] (**) Option "_source" "server/udev"
[    53.931] (II) input device 'Logitech M310', /dev/input/event0 is tagged by udev as: Mouse
[    53.931] (II) Device 'Logitech M310' set to 1100 DPI
[    53.931] (II) input device 'Logitech M310', /dev/input/event0 is a pointer caps
[    53.931] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-3/5-3:1.2/0003:046D:C52B.0004/0003:046D:1024.0005/input/input0/event0"
[    53.931] (II) XINPUT: Adding extended input device "Logitech M310" (type: MOUSE, id 9)
[    53.931] (**) Option "AccelerationScheme" "none"
[    53.931] (**) Logitech M310: (accel) selected scheme none/0
[    53.931] (**) Logitech M310: (accel) acceleration factor: 2.000
[    53.931] (**) Logitech M310: (accel) acceleration threshold: 4
[    53.931] (II) input device 'Logitech M310', /dev/input/event0 is tagged by udev as: Mouse
[    53.931] (II) Device 'Logitech M310' set to 1100 DPI
[    53.931] (II) input device 'Logitech M310', /dev/input/event0 is a pointer caps
[    53.931] (II) config/udev: Adding input device Logitech M310 (/dev/input/mouse0)
[    53.931] (II) No input driver specified, ignoring this device.
[    53.931] (II) This device may have been added with another device file.
[    53.932] (II) config/udev: Adding input device Logitech K520 (/dev/input/event1)
[    53.932] (**) Logitech K520: Applying InputClass "libinput keyboard catchall"
[    53.932] (II) Using input driver 'libinput' for 'Logitech K520'
[    53.932] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 26 paused 0
[    53.932] (**) Logitech K520: always reports core events
[    53.932] (**) Option "Device" "/dev/input/event1"
[    53.932] (**) Option "_source" "server/udev"
[    53.932] (II) input device 'Logitech K520', /dev/input/event1 is tagged by udev as: Keyboard
[    53.932] (II) input device 'Logitech K520', /dev/input/event1 is a keyboard
[    53.932] (II) libinput: Logitech K520: needs a virtual subdevice
[    53.932] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-3/5-3:1.2/0003:046D:C52B.0004/0003:046D:2011.0006/input/input1/event1"
[    53.932] (II) XINPUT: Adding extended input device "Logitech K520" (type: MOUSE, id 10)
[    53.932] (**) Option "AccelerationScheme" "none"
[    53.932] (**) Logitech K520: (accel) selected scheme none/0
[    53.932] (**) Logitech K520: (accel) acceleration factor: 2.000
[    53.932] (**) Logitech K520: (accel) acceleration threshold: 4
[    53.933] (II) input device 'Logitech K520', /dev/input/event1 is tagged by udev as: Keyboard
[    53.933] (II) input device 'Logitech K520', /dev/input/event1 is a keyboard
[    53.933] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event12)
[    53.933] (II) No input driver specified, ignoring this device.
[    53.933] (II) This device may have been added with another device file.
[    53.933] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event13)
[    53.933] (II) No input driver specified, ignoring this device.
[    53.933] (II) This device may have been added with another device file.
[    53.933] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event14)
[    53.933] (II) No input driver specified, ignoring this device.
[    53.933] (II) This device may have been added with another device file.
[    53.933] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event15)
[    53.933] (II) No input driver specified, ignoring this device.
[    53.933] (II) This device may have been added with another device file.
[    53.933] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event16)
[    53.933] (II) No input driver specified, ignoring this device.
[    53.933] (II) This device may have been added with another device file.
[    53.934] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event17)
[    53.934] (II) No input driver specified, ignoring this device.
[    53.934] (II) This device may have been added with another device file.
[    53.934] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event18)
[    53.934] (II) No input driver specified, ignoring this device.
[    53.934] (II) This device may have been added with another device file.
[    53.934] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[    53.934] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    53.934] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[    53.934] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[    53.934] (**) Eee PC WMI hotkeys: always reports core events
[    53.934] (**) Option "Device" "/dev/input/event5"
[    53.934] (**) Option "_source" "server/udev"
[    53.934] (II) input device 'Eee PC WMI hotkeys', /dev/input/event5 is tagged by udev as: Keyboard
[    53.934] (II) input device 'Eee PC WMI hotkeys', /dev/input/event5 is a keyboard
[    53.934] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input5/event5"
[    53.934] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[    53.934] (**) Option "xkb_model" "pc105"
[    53.934] (**) Option "xkb_layout" "fr"
[    53.934] (**) Option "xkb_variant" "latin9"
[    53.935] (II) input device 'Eee PC WMI hotkeys', /dev/input/event5 is tagged by udev as: Keyboard
[    53.935] (II) input device 'Eee PC WMI hotkeys', /dev/input/event5 is a keyboard
[    53.935] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    53.935] (II) No input driver specified, ignoring this device.
[    53.935] (II) This device may have been added with another device file.
[    53.937] (**) Logitech K520: Applying InputClass "libinput keyboard catchall"
[    53.937] (II) Using input driver 'libinput' for 'Logitech K520'
[    53.937] (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65
[    53.937] (**) Logitech K520: always reports core events
[    53.937] (**) Option "Device" "/dev/input/event1"
[    53.937] (**) Option "_source" "_driver/libinput"
[    53.937] (II) libinput: Logitech K520: is a virtual subdevice
[    53.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:07.1/0000:0a:00.3/usb5/5-3/5-3:1.2/0003:046D:C52B.0004/0003:046D:2011.0006/input/input1/event1"
[    53.937] (II) XINPUT: Adding extended input device "Logitech K520" (type: KEYBOARD, id 12)
[    53.937] (**) Option "xkb_model" "pc105"
[    53.937] (**) Option "xkb_layout" "fr"
[    53.937] (**) Option "xkb_variant" "latin9"
[    56.760] (II) modeset(0): EDID vendor "HWP", prod id 9872
[    56.760] (II) modeset(0): Printing DDC gathered Modelines:
[    56.760] (II) modeset(0): Modeline "2560x1600"x0.0  268.00  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.5 kHz eP)
[    56.760] (II) modeset(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
[    57.007] (II) modeset(0): Disabling kernel dirty updates, not required.
[    62.904] (II) modeset(0): EDID vendor "HWP", prod id 9872
[    62.904] (II) modeset(0): Printing DDC gathered Modelines:
[    62.904] (II) modeset(0): Modeline "2560x1600"x0.0  268.00  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.5 kHz eP)
[    62.904] (II) modeset(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
 

Dernière modification par Debian Alain (04-02-2018 21:31:17)

Hors ligne

#11 04-02-2018 23:31:02

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

bonjour ;

la distribution de calixtus06 :  https://librazik.tuxfamily.org/

installer librazik depuis une base debian (stable ?)



Non, non désolé Alain mais là je suis sur une debian stretch pour mon fiston qui veut des jeux dessus. La librazik est sur d'autres pc, c'est pour mon boulot de prof de guitare..Tu as raison j’utilise plusieurs debian: il faut que je précise: là pour ce fil c'est strech qui est concernée.

Pour le pilote, il y a un hic, j'ai tenté d'installer:

apt install nvidia-legacy-304xx-driver



mais j'obtiens:

lspci -v | grep -A 12 VGA



Kernel driver in use: nouveau
  Kernel modules: nvidia



vérification:

l libgl1-nvidia-glx:i386
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
nvidia-legacy-304xx-driver is already the newest version (304.135-2).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances      
Lecture des informations d'état... Fait
libgl1-nvidia-glx:i386 is already the newest version (375.82-1~deb9u1).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
root@GASPARD:/home/nicolas#
 



Mais as-ru bien installé toutes les bibliothèques
nécessaires pour le driver graphique nouveau en 32 bits. La libc6 seule ne suffit pas,
il faut les bibliothèques pour X11, et en particulier la version 32 bits de la partie de nouveau est
chargée par Xorg, ainsi que toutes ces dépendances



Je ne sais pas : comment vérifier ça me paraît hardu pour du debian-facile. Dans synaptic il n'y a pas "nouveau" qui apparaît alors ses dépendances, encore moins.

Dernière modification par calixtus06 (05-02-2018 00:16:39)


Il n'y a pas de mauvaises questions...

Hors ligne

#12 05-02-2018 00:14:24

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Bon, l'ordi a de nouveau planté. Ecran noir au redémarrage. Je vais devoir réinstaller debian pour la énième fois .  Si je n'avais pas passé mon week end sur ce problème j'en serai à la case départ. Faut se rassurer comme on peut.

Il n'y a pas de mauvaises questions...

Hors ligne

#13 05-02-2018 06:44:45

anonyme
Invité

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Bonjour
tu pense avoir installé le driver avec ceci


apt install nvidia-legacy-304xx-driver
 



c'est pas sérieux , il y a un wiki D_F pour installer un driver nonfree nvidia

la un souci


Kernel driver in use: nouveau
  Kernel modules: nvidia
 



nouveau doit etre blacklisté par l'installation du driver nvidia

en cherchant un peu tu dois trouver des posts sur steam et l'installation pas a pas.

pour le driver il faut utiliser dkms  ( et  installer les headers du noyau par précaution )

#14 05-02-2018 08:44:00

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

anonyme a écrit :

Bonjour
tu pense avoir installé le driver avec ceci


apt install nvidia-legacy-304xx-driver
 



c'est pas sérieux , il y a un wiki D_F pour installer un driver nonfree nvidia

la un souci


Kernel driver in use: nouveau
  Kernel modules: nvidia
 



nouveau doit etre blacklisté par l'installation du driver nvidia

en cherchant un peu tu dois trouver des posts sur steam et l'installation pas a pas.

pour le driver il faut utiliser dkms  ( et  installer les headers du noyau par précaution )



Salut Robert , oui j'ai suivi l'un des tuto de debian facile pour l'install du pilote et pour l'install de steam.

https://debian-facile.org/doc:materiel: … ia:accueil

https://wiki.debian.org/fr/NvidiaGraphicsDrivers


Il n'y a pas de mauvaises questions...

Hors ligne

#15 05-02-2018 09:17:19

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Bon deuxième installation complète de debian depuis ce matin kernal_panic.gif

Tutos suivis à la lettre

A un moment j'ai vu passé des messages qui m'ont intrigués: kms disabled by bios ( sauf erreur de ma part)
Et à l'install du pilote " missing firmwire...missing firmwire"

Bon ( ?)

Retour au tuto:

grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log



grep: /var/log/Xorg.0.log: Aucun fichier ou dossier de ce type
nicolas@GASPARD:~$
 





#

# deb cdrom:[Official Debian GNU/Linux Live 9.3.0 gnome 2017-12-09T12:32]/ stretch main

#deb cdrom:[Official Debian GNU/Linux Live 9.3.0 gnome 2017-12-09T12:32]/ stretch main

deb http://ftp.fr.debian.org/debian/ stretch main
deb-src http://ftp.fr.debian.org/debian/ stretch main

deb http://security.debian.org/debian-security stretch/updates main
deb-src http://security.debian.org/debian-security stretch/updates main

# stretch-updates, previously known as 'volatile'
deb http://ftp.fr.debian.org/debian/ stretch-updates main
deb-src http://ftp.fr.debian.org/debian/ stretch-updates main


#stretch 9
deb http://security.debian.org/ stretch/updates main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch main contrib non-free
deb http://ftp.fr.debian.org/debian/ stretch-updates main contrib non-free
#deb http://ftp.fr.debian.org/debian/ stretch-backports main contrib non-free



Enregistrer

apt update && apt upgrade



nvidia-detect


root@GASPARD:/# nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G72 [GeForce 7200 GS / 7300 SE] [10de:01d3] (rev a1)

Checking card:  NVIDIA Corporation G72 [GeForce 7200 GS / 7300 SE] (rev a1)
Your card is only supported up to the 304 legacy drivers series.
It is recommended to install the
    nvidia-legacy-304xx-driver
package.
root@GASPARD:/#
 



@ROBERT

Pourquoi dis-tu que ce n'est pas sérieux d'installer le pilote par l'installation du métapaquet " nvidia-legacy-304xx-driver" . Je ne pige pas.
Dans synaptic, il y a des paquets mais lequel choisir pour ne pas tout replanter ?

Je repars sur le tuto :

apt-get install nvidia-legacy-304xx-kernel-dkms nvidia-settings-legacy-304xx xserver-xorg-video-nvidia-legacy-304xx linux-headers-$(uname -r)



W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168g-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8106e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8411-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8402-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168f-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8105e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-3.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168d-1.fw for module r8169
 



apt-cache show xserver-xorg-video-nvidia



Package: xserver-xorg-video-nvidia
Source: nvidia-graphics-drivers
Version: 375.82-1~deb9u1
Installed-Size: 22490
Maintainer: Debian NVIDIA Maintainers <pkg-nvidia-devel@lists.alioth.debian.org>
Architecture: amd64
Replaces: glx-alternative-nvidia (<< 0.6.91)
Provides: xorg-driver-video, xserver-xorg-video-nvidia-any
Depends: libnvidia-glcore (= 375.82-1~deb9u1), nvidia-alternative (= 375.82-1~deb9u1), nvidia-support (>= 20120630), xorg-video-abi-23 | xorg-video-abi-20 | xorg-video-abi-19 | xorg-video-abi-18 | xorg-video-abi-15 | xorg-video-abi-14 | xorg-video-abi-13 | xorg-video-abi-12 | xorg-video-abi-11 | xorg-video-abi-10 | xorg-video-abi-8 | xorg-video-abi-6.0, xserver-xorg-core (<< 2:1.19.99), libc6 (>= 2.2.5)
Pre-Depends: nvidia-installer-cleanup, nvidia-legacy-check (>= 343)
Recommends: nvidia-driver (>= 375.82), nvidia-vdpau-driver (>= 375.82), nvidia-kernel-dkms (= 375.82-1~deb9u1) | nvidia-kernel-375.82, nvidia-settings (>= 375)
Suggests: nvidia-kernel-dkms (>= 375.82) | nvidia-kernel-source (>= 375.82)
Breaks: glx-alternative-nvidia (<< 0.6.91)
Description-en: NVIDIA binary Xorg driver
 The NVIDIA binary driver provides optimized hardware acceleration of
 OpenGL/GLX/EGL/GLES applications via a direct-rendering X Server
 for graphics cards using NVIDIA chip sets.
 .
 Please see the nvidia-kernel-dkms or
 nvidia-kernel-source packages
 for building the kernel module required by this package.
 This will provide nvidia-kernel-375.82.
 .
 This version only supports GeForce, Quadro, NVS, Tesla, ... GPUs based on the
 Fermi, Kepler, Maxwell, or newer architectures.  Look at the legacy packages
 for older cards.
 .
 See /usr/share/doc/nvidia-driver/README.txt.gz
 for a complete list of supported GPUs and PCI IDs.
Description-md5: 5cd341d1faa5b010f1e997cfe66ff427
Homepage: http://www.nvidia.com
Section: non-free/x11
Priority: optional
Filename: pool/non-free/n/nvidia-graphics-drivers/xserver-xorg-video-nvidia_375.82-1~deb9u1_amd64.deb
Size: 3186090
MD5sum: 2e172a4cd4d327066b9cc42e447b2409
SHA256: 12b44def1ea794e3d6e97d3e2eda6f9c8fc3e19bb8d6f2e43129721ae2ec3dd1

root@GASPARD:/home/nicolas#
 



Pourquoi le pilote 375.82.1 à la place du 304.135 ????

Dernière modification par calixtus06 (05-02-2018 10:04:43)


Il n'y a pas de mauvaises questions...

Hors ligne

#16 05-02-2018 10:06:55

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

pour répondre à ton post #12 , calixtus06 ,

tu peux voir l'éventuelle pésence d'un programme grâce à la  commande :

apt policy ...


par exemple (dans ton cas) :

apt policy nouveau


pour voir l'existence de nouveau sur ta machine .

chez moi par exemple avec vlc :

~$ apt policy vlc


vlc:
  Installé : 3.0.0~rc7-2
  Candidat : 3.0.0~rc7-2
 Table de version :
     1:3.0.0~rc8-dmo1 100
        100 ftp://ftp.deb-multimedia.org testing/main amd64 Packages
     3.0.0~rc8-1 100
        100 http://ftp.fr.debian.org/debian unstable/main amd64 Packages
 *** 3.0.0~rc7-2 500
        500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
        100 /var/lib/dpkg/status
 



toujours chez moi avec nouveau .
j'utilise une carte amd , donc nouveau , normalement , connais pas :

~$ apt policy nouveau


N: Impossible de trouver le paquet nouveau

Dernière modification par Debian Alain (05-02-2018 10:13:47)

Hors ligne

#17 05-02-2018 10:17:19

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Salut Alain et merci, effectivement à ce stade :

apt policy nouveau


N: Impossible de trouver le paquet nouveau



apt policy nvidia


nvidia:
  Installé : (aucun)
  Candidat : (aucun)
 Table de version :



 apt policy nvidia-307xx-driver


N: Impossible de trouver le paquet nvidia-307xx-driver
root@GASPARD:/home/nicolas#
 



Du coup qui est le pilote graphique que j'utilise ?

lshw -enable pci -class display



  *-display                
       description: VGA compatible controller
       produit: G72 [GeForce 7200 GS / 7300 SE]
       fabriquant: NVIDIA Corporation
       identifiant matériel: 0
       information bus: pci@0000:01:00.0
       version: a1
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nouveau latency=0
       ressources: irq:27 mémoire:fa000000-faffffff mémoire:d0000000-dfffffff mémoire:fb000000-fbffffff mémoire:c0000-dffff
 

Dernière modification par calixtus06 (05-02-2018 10:22:51)


Il n'y a pas de mauvaises questions...

Hors ligne

#18 05-02-2018 10:34:27

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Bon retour sur steam


Error: You are missing the following 32-bit libraries, and Steam may not run:
libGL.so.1
 



Comment trouver et installer cette librairie ?


Il n'y a pas de mauvaises questions...

Hors ligne

#19 05-02-2018 10:45:08

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Debian Alain a écrit :

toujours chez moi avec nouveau .
j'utilise une carte amd , donc nouveau , normalement , connais pas :


~$ apt policy nouveau
 



N: Impossible de trouver le paquet nouveau
 


Bon, tant qu'à donner des exemples autant donner des exemples qui ont du sens. Il n'y a aucun paquet
avec pour nom nouveau, par contre, il y a deux paquets xserver-xorg-video-nouveau et libdrm-nouveau2
et leur pendant pour l'architecture i386 pour une installation 64 bits en multiarch avec i386 en supplément.

Mais peu importe, le fait que le paquet est installé ne signifie pas que c'est le driver utilisé par xorg… et ce qui vaut
pour nouveau, vaut également pour le driver nvidia, donc en effet il ne suffit pas d'installer le paquet
nvidia-legacy-304xx-driver pour effectivement utilisé ce driver. Il faut encore faire un xorg.conf
qui permette effectivement de l'utiliser. Il paraît que ce n'est plus nécessaire, mais chez moi, ça ne marche
que si j'ai un xorg.conf qui demande explicitement d'utiliser le driver nvidia. Pour le faire il y a un script dans le
paquet : nvidia-xconfig le script s'appelle nvidia-xconfig. Il suffit de le lancer, il va générer
un xorg.conf, qu'il faudra placer dans /etc/X11/. Mais je pense que tout cela est déjà expliqué dans le wiki debian-facile…


EDIT Il y a même nounours qui a créé une page sur l'installation d'un driver legacy :
https://debian-facile.org/utilisateurs: … acy-driver
Il a au moins  fait une erreur, lorsqu'il dit de faire :


nano /etc/X11
 


Il veut dire :


nano /etc/X11/xorg.conf
 


Je ne pense que cette procédure soit la plus simple, il vaut mieux se servir du script nvidia-xconfig, le seul soucis
c'est que ce script n'existe apparemment que pour la version courante du driver, et pas pour les anciennes versions
(legacy)…

EDIT2 le lien sur la configuration du driver pour les cartes nvidia :
https://debian-facile.org/doc:materiel: … ia:accueil

Dernière modification par enicar (05-02-2018 10:57:11)

Hors ligne

#20 05-02-2018 11:58:00

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

merci de m'avoir rectifié enicar .

donc , je corrige . chez moi :
ton pilote (sur ma machine) :

~$ apt policy xserver-xorg-video-nouveau


xserver-xorg-video-nouveau:
  Installé : 1:1.0.15-2
  Candidat : 1:1.0.15-2
 Table de version :
 *** 1:1.0.15-2 500
        500 http://ftp.fr.debian.org/debian testing/main amd64 Packages
        100 http://ftp.fr.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
 



pourtant , j'ai une carte AMD :
d'ailleurs , si tu pouvais  taper cette commande et nous donner le résultat , ce serait sympa . merci .

~$ lspci -nnk | grep VGA


09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon RX 550] [1002:699f] (rev c7)



pour toi , normalement , tu n'as pas besoin de ça .
c'est pas sûr que ça puisse t'aider , mais , dans le doute (ton firmware , chez moi) :

~$ apt policy firmware-misc-nonfree


firmware-misc-nonfree:
  Installé : 20170823-1
  Candidat : 20170823-1
 Table de version :
 *** 20170823-1 500
        500 http://ftp.fr.debian.org/debian testing/non-free amd64 Packages
        500 http://ftp.fr.debian.org/debian testing/non-free i386 Packages
        100 http://ftp.fr.debian.org/debian unstable/non-free amd64 Packages
        100 http://ftp.fr.debian.org/debian unstable/non-free i386 Packages
        100 /var/lib/dpkg/status



pour l'installer :

sudo apt install firmware-misc-nonfree



c'est bien ton lien ?

lien d'enicar , je crois

pour installer le pilote libre nouveau , sans le pilote propriétaire nvidia - detect ,
et donc sans le firmware non-free , apparemment , tu n'as  que ça à faire :

ça tient en 2 lignes de commande

Le pilote libre : Nouveau
Installation

Dans un terminal superutilisateur tapez et validez les lignes suivantes :
pour les pilotes proprement dits :
sudo apt-get update && sudo apt-get install xserver-xorg-video-nouveau
pour l'accélération graphique :
sudo apt-get install libgl1-mesa-glx libgl1-mesa-dri



je t'ai donné , volontairement , le plus simple .
d'après le lien .

le reste est un peu confus pour moi et d'ailleurs , je suis passé à la  concurence depuis longtemps .

charge à ceux  qui pourront et qui voudront bien , de t'aider .

non pas  que je veuille pas mais là , je nage en terrain inconnu .

donc , je soumets mes  démarches à approbation et validation .

si nouveau ne fonctionne pas , il faudra te tourner vers les pilotes proprio .

mais là , j'y connais rien .

je veux bien, t'aider mais c'est sans garantie .

pour la petite note ;

en lançant ceci :

~$ grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log


tu dois obtenir quelque chose comme ça (chez moi) :

[    23.688] (II) Module ati: vendor="X.Org Foundation"
[    23.688]  compiled for 1.19.3, module version = 7.10.0
[    23.688]  Module class: X.Org Video Driver
--
[    23.769] (II) Module radeon: vendor="X.Org Foundation"
[    23.769]  compiled for 1.19.3, module version = 7.10.0
[    23.769]  Module class: X.Org Video Driver
--
[    23.770] (II) Module modesetting: vendor="X.Org Foundation"
[    23.770]  compiled for 1.19.5, module version = 1.19.5
[    23.770]  Module class: X.Org Video Driver
--
[    23.776] (II) Module fbdev: vendor="X.Org Foundation"
[    23.776]  compiled for 1.19.0, module version = 0.4.4
[    23.776]  Module class: X.Org Video Driver
--
[    23.784] (II) Module vesa: vendor="X.Org Foundation"
[    23.784]  compiled for 1.19.0, module version = 2.3.4
[    23.784]  Module class: X.Org Video Driver



toujours pour la petite note : 

multi arch sous debian

données carte graphique nvidia 7300 se

Dernière modification par Debian Alain (05-02-2018 13:20:20)

Hors ligne

#21 05-02-2018 14:54:51

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Je reprends des éléments du fil:

#2 source list revue corrigée enregistrée

# 4multiarch fait

#8

Ça n'a rien à voir mais, j'en parle pour bien montrer la position de nvidia : nvidia a décidé d'arrêter
les mises à jour pour le pilote legacy 304xx (et les plus anciens je suppose…). Ça m'embête
car c'est le pilote qui fonctionne bien sur ma machine



#9

Il y a quelques questions qui reste en suspend. Je vois que tu as de nouveau installé une
debian en 64 bits, jusque là pas de soucis. Mais as-ru bien installé toutes les bibliothèques
nécessaires pour le driver graphique nouveau en 32 bits. La libc6 seule ne suffit pas,
il faut les bibliothèques pour X11, et en particulier la version 32 bits de la partie de nouveau qui est
chargée par Xorg, ainsi que toutes ses dépendances.



comment vérifier si les librairies dépendances de nouveau sont installées ?

# 15

c'est pas sérieux , il y a un wiki D_F pour installer un driver nonfree nvidia



en cherchant un peu tu dois trouver des posts sur steam et l'installation pas a pas.

pour le driver il faut utiliser dkms  ( et  installer les headers du noyau par précaution )




Les tutos lus et relus

https://wiki.debian.org/NvidiaGraphicsD … cy_GPUs.29

dkms c'est quoi ? un compilateur ?
"installer les headers du noyau avec précaution"  Moi pas comprendre Suis sur debian "facile" ??

#21

e fait que le paquet est installé ne signifie pas que c'est le driver utilisé par xorg… et ce qui vaut
pour nouveau, vaut également pour le driver nvidia, donc en effet il ne suffit pas d'installer le paquet
nvidia-legacy-304xx-driver pour effectivement utilisé ce driver. Il faut encore faire un xorg.conf



c'est effectivement indiqué dans le tuto d'install d'aller dans le fichier de config et je pense l'avoir fait et refait


il y a un script dans le
paquet : nvidia-xconfig le script s'appelle nvidia-xconfig. Il suffit de le lancer, il va générer
un xorg.conf, qu'il faudra placer dans /etc/X11/. Mais je pense que tout cela est déjà expliqué dans le wiki debian-facile…



oui c'est plus ou moins déjà expliqué comme cela

Ce soir je reviens à la maison et retente l'installation du pilote de chez nvidia pris en compte par xorg
J'ai déjà dû réinstaller 3 fois aujourd'hui debian qui se rallume puis qui bloque alors que je n'avais jamais eu ces soucis avant. Tout fonctionnait bien jusqu'à ce que je veuille installer steam.

Je ne suis pas le seul :
https://debian-facile.org/viewtopic.php?id=20007
https://www.reddit.com/r/debian/comment … all_steam/

Je lirai ça tranquillement, là j'ai mal au crâne

https://debian-facile.org/viewtopic.php?id=19670

Dernière modification par calixtus06 (05-02-2018 15:18:59)


Il n'y a pas de mauvaises questions...

Hors ligne

#22 05-02-2018 16:10:49

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

bon , je crois que je te  comprends , calixtus06.

tu veux résoudre ton problème de  steam . kernal_panic.gif

mais , pour l'instant , tu sembles  avoir un souci avec ta carte graphique .

donc , occupons nous de la carte graphique d'abord , de steam ensuite .

enfin , si tu es  d'accord . yes.gif

pour ta carte graphique , il semble y avoir mélange entre le pilote libre "nouveau" et le pilote propriétaire nvidia .

choisis . crash.gif

soit tu installes "nouveau" , soit les pilotes nvidia . pas les deux .

en tout cas pas en même temps . scratchhead.gif

après , en fonction de  ton choix , la team D-F peut sûrement t'aider . help.gif

puisqu'on était dans les synthèses , je me suis permis d'en faire une .

prends le bien calixtus06 . ce n'est pas du tout pour t'être désagréable que j'ai écrit ce post . peace_flag.gif

c'est pour que tout le monde comprenne bien ce qui se passe .

surtout toi (et moi aussi par la même occase) , car j'ai l'impression que tout est devenu confus dans ce fil .

bonne journée . big_smile

et bonne chance dans tes recherches . smile

Dernière modification par Debian Alain (05-02-2018 16:12:20)

Hors ligne

#23 05-02-2018 16:17:30

calixtus06
Membre
Distrib. : Librazik 4
Noyau : 5.10.0-14-lzk-bl-amd64
(G)UI : mate
Inscription : 25-03-2016

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Un grand merci Alain,

Je ne parviens pas à estimer ce qui est le mieux pour la bécanne en question d'utiliser nouveau ou nvidia.

Qu'en penses la team justement ?

Il n'y a pas de mauvaises questions...

Hors ligne

#24 05-02-2018 16:38:56

Debian Alain
Membre
Lieu : Bretagne
Distrib. : sid (unstable) / bullseye (stable)
Noyau : Linux sid 6.4.0-3-amd64
(G)UI : Gnome X.org (X11) / GDM3
Inscription : 11-03-2017
Site Web

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

je pense que la team me confirmera mais je crois que entre "nouveau" et proprio , c'est un peu kif kif . smile

des fois , c'est le pilote libre qui fonctionne , des  fois le proprio . neutral

on ne peut pas exactement savoir . scratchhead.gif

ni pourquoi ?

j'ai une préférence pour les pilotes libres .

(d'autant plus que j'en utilise un avec ma carte).

mais si ça marche pas ....  sos.gif

donc , dans ton cas , à priori , j'aimerai volontiers utiliser nouveau mais sans certitude ni garantie . help.gif

de toutes façons , si ça ne marche pas  avec nouveau , on peut passer aux pilotes poprio .

mais faut bien commencer quelque part , donc , pourquoi pas par là ?

pilote nouveau compilé (pt'êt une  soluce  , enfin !)

Wiki D-F : pilotes nvidia accueil (intéressant) pilotes libres (nouveau) et non-libres (propriétaires)

Un seul de ces pilotes doit être installé en même temps !

pilotes libres  a écrit :

Le pilote libre : Nouveau
Installation

Dans un terminal superutilisateur tapez et validez les lignes suivantes :
pour les pilotes proprement dits :
apt-get update && apt-get install xserver-xorg-video-nouveau
pour l'accélération graphique :
apt-get install libgl1-mesa-glx libgl1-mesa-dri

Configuration :

Normalement, il n'y a rien à faire.

Si le pilote n'a pas été choisi par défaut, créez et éditez un fichier /etc/X11/xorg.conf avec nano ainsi :


nano /etc/X11/xorg.conf

Et si elle n'y sont pas déjà, y écrire les lignes suivantes :

Extrait de /etc/X11/xorg.conf
Section "Device"
Identifier    "Video Card"
Driver        "nouveau"
EndSection

Le valeur du champ Identifier peut varier suivant le système (vous pouvez mettre le nom de votre carte Graphique ou autre identifiant…)

Plus qu'un petit reboot des familles et voilà ! :-D



en cas de conflit  a écrit :

Conflits avec les pilotes propriétaires

Si vous avez installé les pilotes propriétaires, il risque fort d'y avoir conflit, notamment au niveau de l'accélération graphique.
Pour résoudre ce problème supprimez3) les installations précédentes ainsi :

apt-get remove nvidia-driver nvidia-glx nvidia-kernel-dkms xserver-xorg-video-nvidia

Écran noir au redémarrage

Si vous avez un écran noir après une installation incomplète des pilotes propriétaires et que vous souhaitez revenir aux pilotes debian d'origine :
Passer en mode dépannage au démarrage du grub et “purger”4) les pilotes nvidia installés :
aptitude purge '~i nvidia'
Supprimer le fichier xorg.conf créé :
rm /etc/X11/xorg.conf
rm -r /etc/X11/xorg.conf.d
Et vérifier que le nouveau pilote est bien installé (cf. ci dessous : commande 'grep' en mode user)
Tout devrait alors rentrer dans l'ordre au prochain redémarrage.

grep -B2 'Module class: X.Org Video Driver' /var/log/Xorg.0.log



pour le reste , regarde le fil suivant : https://debian-facile.org/doc:materiel: … :accueil?s  ,  il est très intéressant .

une fois fait , on verra pour steam .

Dernière modification par Debian Alain (05-02-2018 18:46:57)

Hors ligne

#25 05-02-2018 18:03:12

enicar
Membre
Lieu : pas ici
Distrib. : sid
Noyau : Linux 6.5.3
(G)UI : openbox
Inscription : 26-08-2010

Re : [RESOLU]STEAM ne se lance pas, comment faire ?

Je recommande d'installer un linux 32 bits, de cette façon ça sera un
problème en moins. D'autant que 64 bits c'est utile seulement
lorsqu'on a plus de 4Go de ram… et en 32 bits si tu as moins de 4Go de
ram ça n'ira pas plus lentement et steam tourne en 32 bits. Bref… je
pense que dans ton cas 32 bits, c'est mieux.

Debian Alain a écrit :

soit tu installes "nouveau" , soit les pilotes nvidia . pas les deux .

en tout cas pas en même temps . scratchhead.gif



En fait lorsqu'on installe le pilote nvidia, le script d'installation
blacklist le module nouveau pour le noyau. Du coup, nouveau se trouve
inutilisable. Et il faut absolument avoir un xorg.conf en
correspondance avec l'utilisation du driver nvidia (c'est à dire qu'il
faut qu'il charge le module pour xorg nvidia qui lui va communiquer
avec le module du noyau nvidia…).

calixtus06 a écrit :

dkms c'est quoi ? un compilateur ?


dkms, c'est uns système qui permet d'automatiser l'installation de
modules pour le noyau qui ne sont pas intégrés au noyau. Comme le
pilote nvidia est un pilote propriétaire, il n'est pas intégré au
noyau (il doit bien exister quel exception à cette règle, je suppose
que le noyau peut embarquer un pilote propriétaire, mais pas dans ceux
empaquetés par debian…).  dkms va s'occuper de compiler le module pour
le noyau, mais pour cela il faut que le module ait ses sources adaptés
pour que dkms le prenne en charge. En plus dkms, va s'occuper de faire
le ménage quand le module change de version ou qu'un nouveau noyau est
installé ou qu'un ancien est supprimé.  En somme dkms, c'est très
pratique, il n'y a rien à faire en principe.

calixtus06 a écrit :


"installer les headers du noyau avec précaution"  Moi pas comprendre Suis sur debian "facile" ??


Ces headers sont nécessaires pour installer un module via dkms (entre
autre). Il me fuadrait déjà savoir quel est le noyau qui est installé
sur ta machine pour te répondre (le nom du paquet). Tu pourras le
savoir avec la commande :


dpkg -S /boot/vmlinuz-$(uname -r)
 


Les paquets des noyaux s'appellent linux-image-<version> et les
paquets des headers du noyau correspondant s'appelle
linux-headers-<version>. <version> est à adapter en fonction de ton
cas, bien entendu.

calixtus06 a écrit :

comment vérifier si les librairies dépendances de nouveau sont installées ?


Fais


apt-cache policy  xserver-xorg-video-nouveau:i386
 


Tu verras dans la réponse si le module pour xorg en version i386 (32
bits) est installé ou pas.

Bon quand tu auras répondu à toutes ces questions et aura installé un linux 32 bits
on verra ce que l'on peut faire ou pas…

Dernière modification par enicar (05-02-2018 18:39:15)

Hors ligne

Pied de page des forums