logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 08-02-2018 16:17:41

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

(résolu)Périphérique dvd graveur externe non reconnu

Bonjour, périphérique dvd graveur externe Asus n'est pas reconnu (branche en usb).
Comment faire pour que le périphérique soit vu?

Dernière modification par Leoblue (09-02-2018 21:09:26)

Hors ligne

#2 08-02-2018 18:13:28

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Bonjour smile
Peux-tu nous donner le retour de la commande sans avoir branché le graveur

lsusb


et le retour de la même commande après avoir branché le graveur.

Tu peux aussi trouver des infos avec

dmesg



Si tu le peux, précise le modèle du graveur

Hors ligne

#3 08-02-2018 19:05:50

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Bonjours Chalu,
Voici les réponses des terminals:

~$ lsusb



Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 056a:0300 Wacom Co., Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 248a:8566  
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 



dmesg
 


root@debian:/home/uranus# dmesg
[    0.000000] microcode: microcode updated early to revision 0xb, date = 2007-05-10
[    0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6eaaa3c2-723b-4b4b-ba6c-f203d2578ff0 ro initrd=/install/gtk/initrd.gz quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e614fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e615000-0x000000007e6f0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007e6f1000-0x000000007f597fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f598000-0x000000007f59ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5a0000-0x000000007f62dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f62e000-0x000000007f631fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f632000-0x000000007f6aafff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6ab000-0x000000007f6e8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6e9000-0x000000007f6f1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f2000-0x000000007f6fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f6ff000-0x000000007f6fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI:                  /D945GCCR, BIOS CR94510J.86A.0037.2007.0103.1611 01/03/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7f700 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8fe7c00fe200]
[    0.000000] Base memory trampoline at [ffff8fe7c0089000] 89000 size 24576
[    0.000000] BRK [0x26d37000, 0x26d37fff] PGTABLE
[    0.000000] BRK [0x26d38000, 0x26d38fff] PGTABLE
[    0.000000] BRK [0x26d39000, 0x26d39fff] PGTABLE
[    0.000000] BRK [0x26d3a000, 0x26d3afff] PGTABLE
[    0.000000] BRK [0x26d3b000, 0x26d3bfff] PGTABLE
[    0.000000] BRK [0x26d3c000, 0x26d3cfff] PGTABLE
[    0.000000] BRK [0x26d3d000, 0x26d3dfff] PGTABLE
[    0.000000] BRK [0x26d3e000, 0x26d3efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3526b000-0x3692cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000014 (v00 INTEL )
[    0.000000] ACPI: RSDT 0x000000007F6FD038 00003C (v01 INTEL  D945GCR  00000025      01000013)
[    0.000000] ACPI: FACP 0x000000007F6FC000 000074 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x000000007F6F7000 004162 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: FACS 0x000000007F6AB000 000040
[    0.000000] ACPI: APIC 0x000000007F6F6000 000078 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: WDDT 0x000000007F6F5000 000040 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x000000007F6F4000 00003C (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: ASF! 0x000000007F6F3000 0000A6 (v32 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: HPET 0x000000007F6F2000 000038 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f6fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f6ed000-0x7f6f1fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6fffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007e614fff]
[    0.000000]   node   0: [mem 0x000000007e6f1000-0x000000007f597fff]
[    0.000000]   node   0: [mem 0x000000007f5a0000-0x000000007f62dfff]
[    0.000000]   node   0: [mem 0x000000007f632000-0x000000007f6aafff]
[    0.000000]   node   0: [mem 0x000000007f6e9000-0x000000007f6f1fff]
[    0.000000]   node   0: [mem 0x000000007f6ff000-0x000000007f6fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6fffff]
[    0.000000] On node 0 totalpages: 521563
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3982 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 517581 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7e615000-0x7e6f0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f598000-0x7f59ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f62e000-0x7f631fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f6ab000-0x7f6e8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f6f2000-0x7f6fefff]
[    0.000000] e820: [mem 0x80000000-0xfff7ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8fe83f200000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513386
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6eaaa3c2-723b-4b4b-ba6c-f203d2578ff0 ro initrd=/install/gtk/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2013828K/2086252K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 72424K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3191.994 MHz processor
[    0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.98 BogoMIPS (lpj=12767976)
[    0.004025] pid_max: default: 32768 minimum: 301
[    0.004062] ACPI: Core revision 20160831
[    0.011210] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.011325] Security Framework initialized
[    0.011329] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011341] AppArmor: AppArmor disabled by boot time parameter
[    0.011642] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013097] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.013786] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.013798] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014360] CPU0: Hyper-Threading is disabled
[    0.014365] mce: CPU supports 4 MCE banks
[    0.014376] CPU0: Thermal monitoring enabled (TM1)
[    0.014386] process: using mwait in idle threads
[    0.014393] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.014394] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.030543] ftrace: allocating 25212 entries in 99 pages
[    0.040260] smpboot: Max logical packages: 4
[    0.040682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084000] smpboot: CPU0: Intel(R) Celeron(R) D CPU 3.20GHz (family: 0xf, model: 0x6, stepping: 0x5)
[    0.084000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.084000] ... version:                0
[    0.084000] ... bit width:              40
[    0.084000] ... generic registers:      18
[    0.084000] ... value mask:             000000ffffffffff
[    0.084000] ... max period:             0000007fffffffff
[    0.084000] ... fixed-purpose events:   0
[    0.084000] ... event mask:             000000000003ffff
[    0.084000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084000] x86: Booted up 1 node, 1 CPUs
[    0.084000] smpboot: Total of 1 processors activated (6383.98 BogoMIPS)
[    0.084000] devtmpfs: initialized
[    0.084000] x86/mm: Memory block size: 128MB
[    0.085646] PM: Registering ACPI NVS region [mem 0x7e615000-0x7e6f0fff] (901120 bytes)
[    0.085681] PM: Registering ACPI NVS region [mem 0x7f6ab000-0x7f6e8fff] (253952 bytes)
[    0.085779] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.085797] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.085884] pinctrl core: initialized pinctrl subsystem
[    0.086110] NET: Registered protocol family 16
[    0.086488] cpuidle: using governor ladder
[    0.086491] cpuidle: using governor menu
[    0.086528] ACPI: bus type PCI registered
[    0.086531] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.086664] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.086667] PCI: not using MMCONFIG
[    0.086669] PCI: Using configuration type 1 for base access
[    0.088413] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.088901] ACPI: Added _OSI(Module Device)
[    0.088903] ACPI: Added _OSI(Processor Device)
[    0.088904] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.088905] ACPI: Added _OSI(Processor Aggregator Device)
[    0.091080] ACPI: Interpreter enabled
[    0.091112] ACPI: (supports S0 S1 S3 S4 S5)
[    0.091114] ACPI: Using IOAPIC for interrupt routing
[    0.091165] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.091794] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[    0.091797] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[    0.091810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.099667] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.099679] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.099687] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.099701] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.100847] PCI host bridge to bus 0000:00
[    0.100851] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.100853] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.100856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.100858] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.100860] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[    0.100863] pci_bus 0000:00: root bus resource [mem 0x80000000-0xf0000000 window]
[    0.100865] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.100878] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.101058] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[    0.101071] pci 0000:00:02.0: reg 0x10: [mem 0x90100000-0x9017ffff]
[    0.101078] pci 0000:00:02.0: reg 0x14: [io  0x20e0-0x20e7]
[    0.101085] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.101092] pci 0000:00:02.0: reg 0x1c: [mem 0x90180000-0x901bffff]
[    0.101273] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.101294] pci 0000:00:1b.0: reg 0x10: [mem 0x901c0000-0x901c3fff 64bit]
[    0.101383] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.101502] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.101578] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.101670] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.101752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.101826] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.101915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.101996] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.102066] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.102154] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.102232] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.102304] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.102352] pci 0000:00:1d.0: reg 0x20: [io  0x2080-0x209f]
[    0.102482] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.102555] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.102602] pci 0000:00:1d.1: reg 0x20: [io  0x2060-0x207f]
[    0.102729] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.102800] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.102849] pci 0000:00:1d.2: reg 0x20: [io  0x2040-0x205f]
[    0.102973] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.103042] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.103091] pci 0000:00:1d.3: reg 0x20: [io  0x2020-0x203f]
[    0.103217] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.103293] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.103315] pci 0000:00:1d.7: reg 0x10: [mem 0x901c4000-0x901c43ff]
[    0.103410] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.103513] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.103590] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.103719] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.103790] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.103884] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.103890] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.103894] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.104077] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.104094] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.104104] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.104114] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.104123] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.104134] pci 0000:00:1f.1: reg 0x20: [io  0x20b0-0x20bf]
[    0.104156] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.104157] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.104159] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.104161] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.104299] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.104316] pci 0000:00:1f.2: reg 0x10: [io  0x20c8-0x20cf]
[    0.104325] pci 0000:00:1f.2: reg 0x14: [io  0x20ec-0x20ef]
[    0.104334] pci 0000:00:1f.2: reg 0x18: [io  0x20c0-0x20c7]
[    0.104343] pci 0000:00:1f.2: reg 0x1c: [io  0x20e8-0x20eb]
[    0.104352] pci 0000:00:1f.2: reg 0x20: [io  0x20a0-0x20af]
[    0.104397] pci 0000:00:1f.2: PME# supported from D3hot
[    0.104530] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.104590] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
[    0.104802] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.104876] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.104955] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.105056] pci 0000:04:08.0: [8086:1094] type 00 class 0x020000
[    0.105075] pci 0000:04:08.0: reg 0x10: [mem 0x90000000-0x90000fff]
[    0.105086] pci 0000:04:08.0: reg 0x14: [io  0x1000-0x103f]
[    0.105169] pci 0000:04:08.0: supports D1 D2
[    0.105171] pci 0000:04:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.105204] pci 0000:04:08.0: System wakeup disabled by ACPI
[    0.105297] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.105302] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.105306] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.105313] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.105315] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.105317] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.105319] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.105321] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[    0.105323] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xf0000000 window] (subtractive decode)
[    0.105493] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.105609] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.105726] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[    0.105838] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.105954] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[    0.106067] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.106181] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[    0.106295] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[    0.107147] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.107403] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.107406] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.107413] vgaarb: loaded
[    0.107414] vgaarb: bridge control possible 0000:00:02.0
[    0.107598] PCI: Using ACPI for IRQ routing
[    0.109431] PCI: pci_cache_line_size set to 64 bytes
[    0.109496] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.109498] e820: reserve RAM buffer [mem 0x7e615000-0x7fffffff]
[    0.109500] e820: reserve RAM buffer [mem 0x7f598000-0x7fffffff]
[    0.109502] e820: reserve RAM buffer [mem 0x7f62e000-0x7fffffff]
[    0.109504] e820: reserve RAM buffer [mem 0x7f6ab000-0x7fffffff]
[    0.109505] e820: reserve RAM buffer [mem 0x7f6f2000-0x7fffffff]
[    0.109507] e820: reserve RAM buffer [mem 0x7f700000-0x7fffffff]
[    0.109837] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.109843] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.109850] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.111902] clocksource: Switched to clocksource hpet
[    0.119935] VFS: Disk quotas dquot_6.6.0
[    0.119980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.120182] pnp: PnP ACPI init
[    0.120352] system 00:00: [mem 0xf0000000-0xf3ffffff] could not be reserved
[    0.120355] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
[    0.120358] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.120360] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.120362] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.120365] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.120367] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.120370] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
[    0.120372] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.120375] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.120381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120685] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.120775] system 00:02: [io  0x0500-0x053f] has been reserved
[    0.120778] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.120780] system 00:02: [io  0x0680-0x06ff] has been reserved
[    0.120783] system 00:02: [io  0x0770-0x077f] has been reserved
[    0.120787] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120913] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121163] pnp 00:04: [dma 2]
[    0.121241] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.121486] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.121844] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.121998] pnp: PnP ACPI: found 7 devices
[    0.129559] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.129596] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.129600] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.129603] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.129612] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.129615] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.129617] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.129628] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.129633] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.129636] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.129662] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129664] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129666] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129669] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129671] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129673] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129675] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129677] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129679] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129681] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129684] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129686] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129688] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129690] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129692] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129694] pci 0000:00:1c.2: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129696] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129698] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129706] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[    0.129713] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.129716] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[    0.129721] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.129724] pci 0000:00:1c.3: BAR 14: assigned [mem 0xf8800000-0xf89fffff]
[    0.129729] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.129733] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.129737] pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
[    0.129739] pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]
[    0.129745] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.129748] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.129753] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    0.129758] pci 0000:00:1c.0:   bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.129764] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.129767] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.129772] pci 0000:00:1c.2:   bridge window [mem 0xf8400000-0xf85fffff]
[    0.129776] pci 0000:00:1c.2:   bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.129782] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.129784] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.129790] pci 0000:00:1c.3:   bridge window [mem 0xf8800000-0xf89fffff]
[    0.129794] pci 0000:00:1c.3:   bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.129801] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.129804] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.129809] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.129819] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.129821] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.129823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.129825] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
[    0.129827] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfebfffff window]
[    0.129828] pci_bus 0000:00: resource 9 [mem 0x80000000-0xf0000000 window]
[    0.129831] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.129833] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf81fffff]
[    0.129834] pci_bus 0000:01: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.129837] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.129838] pci_bus 0000:02: resource 1 [mem 0xf8400000-0xf85fffff]
[    0.129840] pci_bus 0000:02: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.129843] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.129844] pci_bus 0000:03: resource 1 [mem 0xf8800000-0xf89fffff]
[    0.129846] pci_bus 0000:03: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.129848] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.129850] pci_bus 0000:04: resource 1 [mem 0x90000000-0x900fffff]
[    0.129852] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.129854] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.129856] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.129857] pci_bus 0000:04: resource 7 [mem 0x000e0000-0x000effff window]
[    0.129859] pci_bus 0000:04: resource 8 [mem 0xf8000000-0xfebfffff window]
[    0.129861] pci_bus 0000:04: resource 9 [mem 0x80000000-0xf0000000 window]
[    0.130005] NET: Registered protocol family 2
[    0.130322] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.130398] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.130507] TCP: Hash tables configured (established 16384 bind 16384)
[    0.130614] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.130640] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.130821] NET: Registered protocol family 1
[    0.130857] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.132699] pci 0000:04:08.0: Firmware left e100 interrupts enabled; disabling
[    0.132705] PCI: CLS 64 bytes, default 64
[    0.132811] Unpacking initramfs...
[    0.745198] Freeing initrd memory: 23304K
[    0.745960] audit: initializing netlink subsys (disabled)
[    0.745998] audit: type=2000 audit(1518088731.744:1): initialized
[    0.746591] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    0.746623] zbud: loaded
[    0.747651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.747704] io scheduler noop registered
[    0.747706] io scheduler deadline registered
[    0.747726] io scheduler cfq registered (default)
[    0.748869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.748884] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.749026] GHES: HEST is not enabled!
[    0.749183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.769756] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.770360] Linux agpgart interface v0.103
[    0.770510] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.770511] AMD IOMMUv2 functionality not available on this system
[    0.770669] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.773284] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.773294] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.773557] mousedev: PS/2 mouse device common for all mice
[    0.773647] rtc_cmos 00:01: RTC can wake from S4
[    0.773813] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.773845] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.773876] ledtrig-cpu: registered to indicate activity on CPUs
[    0.774492] NET: Registered protocol family 10
[    0.774907] mip6: Mobile IPv6
[    0.774911] NET: Registered protocol family 17
[    0.774916] mpls_gso: MPLS GSO support
[    0.775191] microcode: sig=0xf65, pf=0x4, revision=0xb
[    0.775253] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.775462] registered taskstats version 1
[    0.775491] zswap: loaded using pool lzo/zbud
[    0.775589] ima: No TPM chip found, activating TPM-bypass!
[    0.776032] rtc_cmos 00:01: setting system clock to 2018-02-08 11:18:52 UTC (1518088732)
[    0.776134] PM: Hibernation image not present or could not be loaded.
[    0.778935] Freeing unused kernel memory: 1408K
[    0.778938] Write protecting the kernel read-only data: 12288k
[    0.780826] Freeing unused kernel memory: 1980K
[    0.786006] Freeing unused kernel memory: 1248K
[    0.794964] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.832999] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.833221] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.833246] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.833274] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.835830] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.835912] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.838587] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.838754] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.839536] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.839695] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.943547] ACPI: bus type USB registered
[    0.943596] usbcore: registered new interface driver usbfs
[    0.943615] usbcore: registered new interface driver hub
[    0.953696] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.953698] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.978045] usbcore: registered new device driver usb
[    0.978971] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.979334] ehci-pci: EHCI PCI platform driver
[    0.979619] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.979630] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.979650] ehci-pci 0000:00:1d.7: debug port 1
[    0.983549] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.984420] uhci_hcd: USB Universal Host Controller Interface driver
[    0.985231] ehci-pci 0000:00:1d.7: irq 23, io mem 0x901c4000
[    0.991343] SCSI subsystem initialized
[    1.000100] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.000248] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.000251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.000253] usb usb1: Product: EHCI Host Controller
[    1.000254] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd
[    1.000256] usb usb1: SerialNumber: 0000:00:1d.7
[    1.000526] hub 1-0:1.0: USB hub found
[    1.000542] hub 1-0:1.0: 8 ports detected
[    1.001314] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.001326] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.001336] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.001362] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[    1.001516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.001519] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.001520] usb usb2: Product: UHCI Host Controller
[    1.001522] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.001524] usb usb2: SerialNumber: 0000:00:1d.0
[    1.001788] hub 2-0:1.0: USB hub found
[    1.001802] hub 2-0:1.0: 2 ports detected
[    1.002184] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.002195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.002206] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.002247] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[    1.002392] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.002394] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.002396] usb usb3: Product: UHCI Host Controller
[    1.002398] usb usb3: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.002399] usb usb3: SerialNumber: 0000:00:1d.1
[    1.002630] hub 3-0:1.0: USB hub found
[    1.002642] hub 3-0:1.0: 2 ports detected
[    1.003058] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.003548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.003561] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.003573] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.003614] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    1.003744] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.003746] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.003748] usb usb4: Product: UHCI Host Controller
[    1.003749] usb usb4: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.003751] usb usb4: SerialNumber: 0000:00:1d.2
[    1.003992] hub 4-0:1.0: USB hub found
[    1.004066] hub 4-0:1.0: 2 ports detected
[    1.004491] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.004502] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.004511] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.004547] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[    1.004663] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.004665] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.004667] usb usb5: Product: UHCI Host Controller
[    1.004669] usb usb5: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.004670] usb usb5: SerialNumber: 0000:00:1d.3
[    1.004917] hub 5-0:1.0: USB hub found
[    1.004931] hub 5-0:1.0: 2 ports detected
[    1.005192] libata version 3.00 loaded.
[    1.006564] ata_piix 0000:00:1f.1: version 2.13
[    1.008148] Floppy drive(s): fd0 is 1.44M
[    1.011592] scsi host0: ata_piix
[    1.019621] scsi host1: ata_piix
[    1.019749] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
[    1.019751] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
[    1.019980] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.025871] scsi host2: ata_piix
[    1.026113] ata2: port disabled--ignoring
[    1.030523] scsi host3: ata_piix
[    1.030654] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
[    1.030656] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
[    1.036126] FDC 0 is a post-1991 82077
[    1.061158] e100 0000:04:08.0 eth0: addr 0x90000000, irq 20, MAC addr 00:19:d1:58:0f:1d
[    1.135980] e100 0000:04:08.0 enp4s8: renamed from eth0
[    1.254323] ata4.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
[    1.254327] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.254335] ata4.01: ATAPI: TSSTcorpDVD-ROM SH-D163A, SB01, max UDMA/33
[    1.329275] ata4.00: configured for UDMA/133
[    1.333774] ata4.01: configured for UDMA/33
[    1.334311] scsi 3:0:0:0: Direct-Access     ATA      ST380811AS       E    PQ: 0 ANSI: 5
[    1.336069] scsi 3:0:1:0: CD-ROM            TSSTcorp DVD-ROM SH-D163A SB01 PQ: 0 ANSI: 5
[    1.364487] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.364564] sd 3:0:0:0: [sda] Write Protect is off
[    1.364567] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.364599] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.402914] sr 3:0:1:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[    1.402918] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.403219] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    1.445267]  sda: sda1 sda2 < sda5 >
[    1.469697] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.732031] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[    1.760023] tsc: Refined TSC clocksource calibration: 3191.999 MHz
[    1.760029] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c398820, max_idle_ns: 440795273435 ns
[    1.930077] usb 2-2: New USB device found, idVendor=046d, idProduct=c52f
[    1.930081] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.930083] usb 2-2: Product: USB Receiver
[    1.930085] usb 2-2: Manufacturer: Logitech
[    1.941203] hidraw: raw HID events driver (C) Jiri Kosina
[    1.948232] usbcore: registered new interface driver usbhid
[    1.948234] usbhid: USB HID core driver
[    1.951076] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:046D:C52F.0001/input/input3
[    1.951598] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[    1.954551] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:046D:C52F.0002/input/input4
[    2.014181] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[    2.281840] random: fast init done
[    2.369006] PM: Starting manual resume from disk
[    2.369014] PM: Hibernation image partition 8:5 present
[    2.369015] PM: Looking for hibernation image.
[    2.369302] PM: Image not found (code -22)
[    2.369304] PM: Hibernation image not present or could not be loaded.
[    2.624033] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.784381] clocksource: Switched to clocksource tsc
[    2.819086] usb 3-1: New USB device found, idVendor=248a, idProduct=8566
[    2.819090] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.819093] usb 3-1: Product: Wireless Receiver
[    2.819094] usb 3-1: Manufacturer: Telink
[    2.826579] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:248A:8566.0003/input/input5
[    2.885281] hid-generic 0003:248A:8566.0003: input,hidraw2: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.1-1/input0
[    2.890884] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:248A:8566.0004/input/input6
[    2.948399] hid-generic 0003:248A:8566.0004: input,hidraw3: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.1-1/input1
[    3.308039] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    3.492081] usb 5-2: New USB device found, idVendor=056a, idProduct=0300
[    3.492085] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.492087] usb 5-2: Product: CTL-471
[    3.492089] usb 5-2: Manufacturer: Wacom Co.,Ltd.
[    3.515768] input: Wacom Bamboo One S Pen as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:056A:0300.0005/input/input7
[    3.516662] wacom 0003:056A:0300.0005: hidraw4: USB HID v1.10 Mouse [Wacom Co.,Ltd. CTL-471] on usb-0000:00:1d.3-2/input0
[    7.655582] random: crng init done
[    9.684303] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.391480] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.575990] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   12.576320] systemd[1]: Detected architecture x86-64.
[   12.594690] systemd[1]: Set hostname to <debian>.
[   14.723443] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[   14.724905] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.725103] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.725142] systemd[1]: Reached target Remote File Systems.
[   14.725243] systemd[1]: Listening on udev Kernel Socket.
[   14.725386] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   14.725418] systemd[1]: Reached target User and Group Name Lookups.
[   15.384934] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.570717] lp: driver loaded but no devices found
[   15.768548] systemd-journald[191]: Received request to flush runtime journal from PID 1
[   15.813822] ppdev: user-space parallel port driver
[   15.821848] parport_pc 00:05: reported by Plug and Play ACPI
[   15.821926] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[   15.916163] lp0: using parport0 (interrupt-driven).
[   19.769926] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13
[   19.769935] ACPI: Sleep Button [SLPB]
[   19.770048] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
[   19.770052] ACPI: Power Button [PWRF]
[   19.958513] [drm] Initialized
[   20.131537] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.295093] sd 3:0:0:0: Attached scsi generic sg0 type 0
[   20.295163] sr 3:0:1:0: Attached scsi generic sg1 type 5
[   20.615808] pci 0000:00:00.0: Intel 945G Chipset
[   20.615829] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[   20.615925] pci 0000:00:00.0: detected 8192K stolen memory
[   20.615954] [drm] Memory usable by graphics device = 256M
[   20.615959] [drm] Replacing VGA console driver
[   20.618602] Console: switching to colour dummy device 80x25
[   20.618724] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   20.618725] [drm] Driver supports precise vblank timestamp query.
[   20.619661] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.623086] intel_rng: FWH not detected
[   20.656185] [drm] RC6 disabled, disabling runtime PM support
[   20.656225] [drm] initialized overlay support
[   20.658338] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   20.684411] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000429 (\GPE0) (20160831/utaddress-247)
[   20.684421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.684472] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   20.822898] fbcon: inteldrmfb (fb0) is primary device
[   20.905835] snd_hda_codec_realtek hdaudioC0D2: ALC883: SKU not ready 0x411111f0
[   20.908306] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   20.908309] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.908311] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   20.908312] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   20.908314] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   20.908316] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   20.908318] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   20.908319] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   20.931513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   20.932347] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   20.932407] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   20.932464] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   20.937583] Console: switching to colour frame buffer device 210x65
[   20.960363] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   21.036226] leds_ss4200: no LED devices found
[   21.105625] input: PC Speaker as /devices/platform/pcspkr/input/input19
[   21.212945] intel_powerclamp: No package C-state available
[   21.937992] iTCO_vendor_support: vendor-support=0
[   21.996612] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   21.996688] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   21.997449] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   25.129979] Adding 2084860k swap on /dev/sda5.  Priority:-1 extents:1 across:2084860k FS
[   94.809801] IPv6: ADDRCONF(NETDEV_UP): enp4s8: link is not ready
[   94.829057] IPv6: ADDRCONF(NETDEV_UP): enp4s8: link is not ready
[   94.832174] e100 0000:04:08.0 enp4s8: NIC Link is Up 100 Mbps Full Duplex
[   94.833140] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s8: link becomes ready
[  160.692175] fuse init (API version 7.26)
[ 2621.225858] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 3531.274057] perf: interrupt took too long (3140 > 3137), lowering kernel.perf_event_max_sample_rate to 63500
[ 3772.406146] loop: module loaded
[ 3772.449777]  loop0: p1 p2
[ 4450.043180] perf: interrupt took too long (3941 > 3925), lowering kernel.perf_event_max_sample_rate to 50750
[ 8673.370579] perf: interrupt took too long (4935 > 4926), lowering kernel.perf_event_max_sample_rate to 40500
[13638.226725] perf: interrupt took too long (6172 > 6168), lowering kernel.perf_event_max_sample_rate to 32250
[16385.481544] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[16385.481599] mce: [Hardware Error]: Machine check events logged
[16385.482515] CPU0: Core temperature/speed normal
[16385.482522] mce: [Hardware Error]: Machine check events logged
[18019.607132] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8531)
[18019.607178] mce: [Hardware Error]: Machine check events logged
[18019.608104] CPU0: Core temperature/speed normal
[18019.608112] mce: [Hardware Error]: Machine check events logged
[20671.843480] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8534)
[20671.843524] mce: [Hardware Error]: Machine check events logged
[20671.844477] CPU0: Core temperature/speed normal
[20671.844485] mce: [Hardware Error]: Machine check events logged
[21195.327148] CPU0: Core temperature above threshold, cpu clock throttled (total events = 9748)
[21195.327187] mce: [Hardware Error]: Machine check events logged
[21195.328120] CPU0: Core temperature/speed normal
[21195.328128] mce: [Hardware Error]: Machine check events logged
[21703.350860] CPU0: Core temperature above threshold, cpu clock throttled (total events = 10057)
[21703.350904] mce: [Hardware Error]: Machine check events logged
[21703.351840] CPU0: Core temperature/speed normal
[21703.351848] mce: [Hardware Error]: Machine check events logged
[23758.539886] CPU0: Core temperature above threshold, cpu clock throttled (total events = 11780)
[23758.539934] mce: [Hardware Error]: Machine check events logged
[23758.540864] CPU0: Core temperature/speed normal
[23758.540874] mce: [Hardware Error]: Machine check events logged

 

Dernière modification par Leoblue (08-02-2018 19:25:27)

Hors ligne

#4 08-02-2018 19:30:14

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Je ne vois que je sois (moi) capable d'interpréter hmm
Tu as pu le tester sur un autre PC pour vérifier qu'il fonctionne bien ?

Hors ligne

#5 08-02-2018 20:07:06

anonyme
Invité

Re : (résolu)Périphérique dvd graveur externe non reconnu

Bonjour

tu a une tablette Wacom et peut etre un clavier (ou sans fil plutot )  Logitech ?
le reste c'est les hub usb , on voit pas de graveur sur le retour de "lsusb"   hmm

#6 08-02-2018 20:19:02

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Je viens de brancher le lecteur-graveur (usb).
oui j'ai ma souris et mon clavier brancher en usb.
Je ne vois rien de changer uand je refais le code lsusb en user. J'ai brancher ma tablette Wacom et installer une clé usb pour inserer l'image iso Windows 7 via l'utilateur WoeUSB.

$ lsusb
Bus 001 Device 005: ID 26bd:9917  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 248a:8566  
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 



J'aimerais bien ue le graveur marche pour essayer de graver l'image ISO sur un DVD.
Comment faire pour ue le piréphériue soit reconnu?
merci pour l'aide.

Hors ligne

#7 08-02-2018 20:37:16

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Salut
Sur le retour de la commande dmesg on voit un message concernant le DVD

[    1.135980] e100 0000:04:08.0 enp4s8: renamed from eth0
[    1.254323] ata4.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
[    1.254327] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.254335] ata4.01: ATAPI: TSSTcorpDVD-ROM SH-D163A, SB01, max UDMA/33
[    1.329275] ata4.00: configured for UDMA/133
[    1.333774] ata4.01: configured for UDMA/33
[    1.334311] scsi 3:0:0:0: Direct-Access     ATA      ST380811AS       E    PQ: 0 ANSI: 5
[    1.336069] scsi 3:0:1:0: CD-ROM            TSSTcorp DVD-ROM SH-D163A SB01 PQ: 0 ANSI: 5
[    1.364487] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.364564] sd 3:0:0:0: [sda] Write Protect is off
[    1.364567] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.364599] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.402914] sr 3:0:1:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[    1.402918] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.403219] sr 3:0:1:0: Attached scsi CD-ROM sr0


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#8 08-02-2018 20:39:23

anonyme
Invité

Re : (résolu)Périphérique dvd graveur externe non reconnu

je pourrai pas t'aider plus attend un peu si quelqu'un a une idée ou les compétences .
au moment ou tu le branche , tu a une activité sur le disque dur ?

#9 08-02-2018 20:58:42

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

J'ai bien un lecteur dvd-cd rom interne.
Mais pas de graveur.

Je vais réassyer avec le ROOT.

# dmesg


[    0.000000] microcode: microcode updated early to revision 0xb, date = 2007-05-10
[    0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6eaaa3c2-723b-4b4b-ba6c-f203d2578ff0 ro initrd=/install/gtk/initrd.gz quiet
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007e614fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007e615000-0x000000007e6f0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007e6f1000-0x000000007f597fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f598000-0x000000007f59ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5a0000-0x000000007f62dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f62e000-0x000000007f631fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f632000-0x000000007f6aafff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6ab000-0x000000007f6e8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6e9000-0x000000007f6f1fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6f2000-0x000000007f6fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f6ff000-0x000000007f6fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f700000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI:                  /D945GCCR, BIOS CR94510J.86A.0037.2007.0103.1611 01/03/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x7f700 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8fe7c00fe200]
[    0.000000] Base memory trampoline at [ffff8fe7c0089000] 89000 size 24576
[    0.000000] BRK [0x26d37000, 0x26d37fff] PGTABLE
[    0.000000] BRK [0x26d38000, 0x26d38fff] PGTABLE
[    0.000000] BRK [0x26d39000, 0x26d39fff] PGTABLE
[    0.000000] BRK [0x26d3a000, 0x26d3afff] PGTABLE
[    0.000000] BRK [0x26d3b000, 0x26d3bfff] PGTABLE
[    0.000000] BRK [0x26d3c000, 0x26d3cfff] PGTABLE
[    0.000000] BRK [0x26d3d000, 0x26d3dfff] PGTABLE
[    0.000000] BRK [0x26d3e000, 0x26d3efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3526b000-0x3692cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000014 (v00 INTEL )
[    0.000000] ACPI: RSDT 0x000000007F6FD038 00003C (v01 INTEL  D945GCR  00000025      01000013)
[    0.000000] ACPI: FACP 0x000000007F6FC000 000074 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x000000007F6F7000 004162 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: FACS 0x000000007F6AB000 000040
[    0.000000] ACPI: APIC 0x000000007F6F6000 000078 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: WDDT 0x000000007F6F5000 000040 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x000000007F6F4000 00003C (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: ASF! 0x000000007F6F3000 0000A6 (v32 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: HPET 0x000000007F6F2000 000038 (v01 INTEL  D945GCR  00000025 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f6fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f6ed000-0x7f6f1fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6fffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007e614fff]
[    0.000000]   node   0: [mem 0x000000007e6f1000-0x000000007f597fff]
[    0.000000]   node   0: [mem 0x000000007f5a0000-0x000000007f62dfff]
[    0.000000]   node   0: [mem 0x000000007f632000-0x000000007f6aafff]
[    0.000000]   node   0: [mem 0x000000007f6e9000-0x000000007f6f1fff]
[    0.000000]   node   0: [mem 0x000000007f6ff000-0x000000007f6fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6fffff]
[    0.000000] On node 0 totalpages: 521563
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3982 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 517581 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7e615000-0x7e6f0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f598000-0x7f59ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f62e000-0x7f631fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f6ab000-0x7f6e8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f6f2000-0x7f6fefff]
[    0.000000] e820: [mem 0x80000000-0xfff7ffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8fe83f200000 s105304 r8192 d29864 u524288
[    0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513386
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=6eaaa3c2-723b-4b4b-ba6c-f203d2578ff0 ro initrd=/install/gtk/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2013828K/2086252K available (6196K kernel code, 1159K rwdata, 2848K rodata, 1408K init, 688K bss, 72424K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3191.994 MHz processor
[    0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.98 BogoMIPS (lpj=12767976)
[    0.004025] pid_max: default: 32768 minimum: 301
[    0.004062] ACPI: Core revision 20160831
[    0.011210] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.011325] Security Framework initialized
[    0.011329] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.011341] AppArmor: AppArmor disabled by boot time parameter
[    0.011642] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013097] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.013786] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.013798] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.014360] CPU0: Hyper-Threading is disabled
[    0.014365] mce: CPU supports 4 MCE banks
[    0.014376] CPU0: Thermal monitoring enabled (TM1)
[    0.014386] process: using mwait in idle threads
[    0.014393] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.014394] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.030543] ftrace: allocating 25212 entries in 99 pages
[    0.040260] smpboot: Max logical packages: 4
[    0.040682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.084000] smpboot: CPU0: Intel(R) Celeron(R) D CPU 3.20GHz (family: 0xf, model: 0x6, stepping: 0x5)
[    0.084000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.084000] ... version:                0
[    0.084000] ... bit width:              40
[    0.084000] ... generic registers:      18
[    0.084000] ... value mask:             000000ffffffffff
[    0.084000] ... max period:             0000007fffffffff
[    0.084000] ... fixed-purpose events:   0
[    0.084000] ... event mask:             000000000003ffff
[    0.084000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084000] x86: Booted up 1 node, 1 CPUs
[    0.084000] smpboot: Total of 1 processors activated (6383.98 BogoMIPS)
[    0.084000] devtmpfs: initialized
[    0.084000] x86/mm: Memory block size: 128MB
[    0.085646] PM: Registering ACPI NVS region [mem 0x7e615000-0x7e6f0fff] (901120 bytes)
[    0.085681] PM: Registering ACPI NVS region [mem 0x7f6ab000-0x7f6e8fff] (253952 bytes)
[    0.085779] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.085797] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.085884] pinctrl core: initialized pinctrl subsystem
[    0.086110] NET: Registered protocol family 16
[    0.086488] cpuidle: using governor ladder
[    0.086491] cpuidle: using governor menu
[    0.086528] ACPI: bus type PCI registered
[    0.086531] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.086664] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.086667] PCI: not using MMCONFIG
[    0.086669] PCI: Using configuration type 1 for base access
[    0.088413] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.088901] ACPI: Added _OSI(Module Device)
[    0.088903] ACPI: Added _OSI(Processor Device)
[    0.088904] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.088905] ACPI: Added _OSI(Processor Aggregator Device)
[    0.091080] ACPI: Interpreter enabled
[    0.091112] ACPI: (supports S0 S1 S3 S4 S5)
[    0.091114] ACPI: Using IOAPIC for interrupt routing
[    0.091165] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.091794] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[    0.091797] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[    0.091810] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.099667] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.099679] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.099687] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.099701] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.100847] PCI host bridge to bus 0000:00
[    0.100851] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.100853] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.100856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.100858] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[    0.100860] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[    0.100863] pci_bus 0000:00: root bus resource [mem 0x80000000-0xf0000000 window]
[    0.100865] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.100878] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.101058] pci 0000:00:02.0: [8086:2772] type 00 class 0x030000
[    0.101071] pci 0000:00:02.0: reg 0x10: [mem 0x90100000-0x9017ffff]
[    0.101078] pci 0000:00:02.0: reg 0x14: [io  0x20e0-0x20e7]
[    0.101085] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.101092] pci 0000:00:02.0: reg 0x1c: [mem 0x90180000-0x901bffff]
[    0.101273] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.101294] pci 0000:00:1b.0: reg 0x10: [mem 0x901c0000-0x901c3fff 64bit]
[    0.101383] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.101502] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.101578] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.101670] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.101752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.101826] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.101915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.101996] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.102066] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.102154] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.102232] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.102304] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.102352] pci 0000:00:1d.0: reg 0x20: [io  0x2080-0x209f]
[    0.102482] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.102555] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.102602] pci 0000:00:1d.1: reg 0x20: [io  0x2060-0x207f]
[    0.102729] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.102800] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.102849] pci 0000:00:1d.2: reg 0x20: [io  0x2040-0x205f]
[    0.102973] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.103042] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.103091] pci 0000:00:1d.3: reg 0x20: [io  0x2020-0x203f]
[    0.103217] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.103293] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.103315] pci 0000:00:1d.7: reg 0x10: [mem 0x901c4000-0x901c43ff]
[    0.103410] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.103513] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.103590] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.103719] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.103790] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.103884] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.103890] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.103894] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[    0.104077] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.104094] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.104104] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.104114] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.104123] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.104134] pci 0000:00:1f.1: reg 0x20: [io  0x20b0-0x20bf]
[    0.104156] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.104157] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.104159] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.104161] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.104299] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.104316] pci 0000:00:1f.2: reg 0x10: [io  0x20c8-0x20cf]
[    0.104325] pci 0000:00:1f.2: reg 0x14: [io  0x20ec-0x20ef]
[    0.104334] pci 0000:00:1f.2: reg 0x18: [io  0x20c0-0x20c7]
[    0.104343] pci 0000:00:1f.2: reg 0x1c: [io  0x20e8-0x20eb]
[    0.104352] pci 0000:00:1f.2: reg 0x20: [io  0x20a0-0x20af]
[    0.104397] pci 0000:00:1f.2: PME# supported from D3hot
[    0.104530] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.104590] pci 0000:00:1f.3: reg 0x20: [io  0x2000-0x201f]
[    0.104802] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.104876] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.104955] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.105056] pci 0000:04:08.0: [8086:1094] type 00 class 0x020000
[    0.105075] pci 0000:04:08.0: reg 0x10: [mem 0x90000000-0x90000fff]
[    0.105086] pci 0000:04:08.0: reg 0x14: [io  0x1000-0x103f]
[    0.105169] pci 0000:04:08.0: supports D1 D2
[    0.105171] pci 0000:04:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.105204] pci 0000:04:08.0: System wakeup disabled by ACPI
[    0.105297] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.105302] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.105306] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.105313] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.105315] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.105317] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.105319] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[    0.105321] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[    0.105323] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xf0000000 window] (subtractive decode)
[    0.105493] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.105609] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.105726] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[    0.105838] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.105954] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[    0.106067] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.106181] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[    0.106295] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[    0.107147] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.107403] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.107406] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.107413] vgaarb: loaded
[    0.107414] vgaarb: bridge control possible 0000:00:02.0
[    0.107598] PCI: Using ACPI for IRQ routing
[    0.109431] PCI: pci_cache_line_size set to 64 bytes
[    0.109496] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.109498] e820: reserve RAM buffer [mem 0x7e615000-0x7fffffff]
[    0.109500] e820: reserve RAM buffer [mem 0x7f598000-0x7fffffff]
[    0.109502] e820: reserve RAM buffer [mem 0x7f62e000-0x7fffffff]
[    0.109504] e820: reserve RAM buffer [mem 0x7f6ab000-0x7fffffff]
[    0.109505] e820: reserve RAM buffer [mem 0x7f6f2000-0x7fffffff]
[    0.109507] e820: reserve RAM buffer [mem 0x7f700000-0x7fffffff]
[    0.109837] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.109843] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.109850] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.111902] clocksource: Switched to clocksource hpet
[    0.119935] VFS: Disk quotas dquot_6.6.0
[    0.119980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.120182] pnp: PnP ACPI init
[    0.120352] system 00:00: [mem 0xf0000000-0xf3ffffff] could not be reserved
[    0.120355] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
[    0.120358] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.120360] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.120362] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.120365] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.120367] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.120370] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
[    0.120372] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.120375] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.120381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120685] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.120775] system 00:02: [io  0x0500-0x053f] has been reserved
[    0.120778] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.120780] system 00:02: [io  0x0680-0x06ff] has been reserved
[    0.120783] system 00:02: [io  0x0770-0x077f] has been reserved
[    0.120787] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.120913] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.121163] pnp 00:04: [dma 2]
[    0.121241] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.121486] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.121844] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.121998] pnp: PnP ACPI: found 7 devices
[    0.129559] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.129596] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.129600] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.129603] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.129612] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.129615] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.129617] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.129628] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.129633] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.129636] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.129662] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129664] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129666] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129669] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129671] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129673] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129675] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129677] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129679] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129681] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.129684] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129686] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.129688] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129690] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129692] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129694] pci 0000:00:1c.2: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129696] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129698] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.129706] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
[    0.129713] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.129716] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
[    0.129721] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.129724] pci 0000:00:1c.3: BAR 14: assigned [mem 0xf8800000-0xf89fffff]
[    0.129729] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.129733] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.129737] pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
[    0.129739] pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]
[    0.129745] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.129748] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.129753] pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf81fffff]
[    0.129758] pci 0000:00:1c.0:   bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.129764] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.129767] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.129772] pci 0000:00:1c.2:   bridge window [mem 0xf8400000-0xf85fffff]
[    0.129776] pci 0000:00:1c.2:   bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.129782] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.129784] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.129790] pci 0000:00:1c.3:   bridge window [mem 0xf8800000-0xf89fffff]
[    0.129794] pci 0000:00:1c.3:   bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.129801] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.129804] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[    0.129809] pci 0000:00:1e.0:   bridge window [mem 0x90000000-0x900fffff]
[    0.129819] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.129821] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.129823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.129825] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff window]
[    0.129827] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfebfffff window]
[    0.129828] pci_bus 0000:00: resource 9 [mem 0x80000000-0xf0000000 window]
[    0.129831] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.129833] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf81fffff]
[    0.129834] pci_bus 0000:01: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
[    0.129837] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.129838] pci_bus 0000:02: resource 1 [mem 0xf8400000-0xf85fffff]
[    0.129840] pci_bus 0000:02: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
[    0.129843] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.129844] pci_bus 0000:03: resource 1 [mem 0xf8800000-0xf89fffff]
[    0.129846] pci_bus 0000:03: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref]
[    0.129848] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.129850] pci_bus 0000:04: resource 1 [mem 0x90000000-0x900fffff]
[    0.129852] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.129854] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.129856] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.129857] pci_bus 0000:04: resource 7 [mem 0x000e0000-0x000effff window]
[    0.129859] pci_bus 0000:04: resource 8 [mem 0xf8000000-0xfebfffff window]
[    0.129861] pci_bus 0000:04: resource 9 [mem 0x80000000-0xf0000000 window]
[    0.130005] NET: Registered protocol family 2
[    0.130322] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.130398] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.130507] TCP: Hash tables configured (established 16384 bind 16384)
[    0.130614] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.130640] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.130821] NET: Registered protocol family 1
[    0.130857] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.132699] pci 0000:04:08.0: Firmware left e100 interrupts enabled; disabling
[    0.132705] PCI: CLS 64 bytes, default 64
[    0.132811] Unpacking initramfs...
[    0.745198] Freeing initrd memory: 23304K
[    0.745960] audit: initializing netlink subsys (disabled)
[    0.745998] audit: type=2000 audit(1518088731.744:1): initialized
[    0.746591] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    0.746623] zbud: loaded
[    0.747651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.747704] io scheduler noop registered
[    0.747706] io scheduler deadline registered
[    0.747726] io scheduler cfq registered (default)
[    0.748869] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.748884] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.749026] GHES: HEST is not enabled!
[    0.749183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.769756] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.770360] Linux agpgart interface v0.103
[    0.770510] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.770511] AMD IOMMUv2 functionality not available on this system
[    0.770669] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.773284] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.773294] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.773557] mousedev: PS/2 mouse device common for all mice
[    0.773647] rtc_cmos 00:01: RTC can wake from S4
[    0.773813] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.773845] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.773876] ledtrig-cpu: registered to indicate activity on CPUs
[    0.774492] NET: Registered protocol family 10
[    0.774907] mip6: Mobile IPv6
[    0.774911] NET: Registered protocol family 17
[    0.774916] mpls_gso: MPLS GSO support
[    0.775191] microcode: sig=0xf65, pf=0x4, revision=0xb
[    0.775253] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.775462] registered taskstats version 1
[    0.775491] zswap: loaded using pool lzo/zbud
[    0.775589] ima: No TPM chip found, activating TPM-bypass!
[    0.776032] rtc_cmos 00:01: setting system clock to 2018-02-08 11:18:52 UTC (1518088732)
[    0.776134] PM: Hibernation image not present or could not be loaded.
[    0.778935] Freeing unused kernel memory: 1408K
[    0.778938] Write protecting the kernel read-only data: 12288k
[    0.780826] Freeing unused kernel memory: 1980K
[    0.786006] Freeing unused kernel memory: 1248K
[    0.794964] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.832999] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.833221] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.833246] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.833274] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.835830] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.835912] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.838587] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.838754] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.839536] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.839695] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.943547] ACPI: bus type USB registered
[    0.943596] usbcore: registered new interface driver usbfs
[    0.943615] usbcore: registered new interface driver hub
[    0.953696] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.953698] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.978045] usbcore: registered new device driver usb
[    0.978971] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.979334] ehci-pci: EHCI PCI platform driver
[    0.979619] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.979630] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.979650] ehci-pci 0000:00:1d.7: debug port 1
[    0.983549] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.984420] uhci_hcd: USB Universal Host Controller Interface driver
[    0.985231] ehci-pci 0000:00:1d.7: irq 23, io mem 0x901c4000
[    0.991343] SCSI subsystem initialized
[    1.000100] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.000248] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.000251] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.000253] usb usb1: Product: EHCI Host Controller
[    1.000254] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd
[    1.000256] usb usb1: SerialNumber: 0000:00:1d.7
[    1.000526] hub 1-0:1.0: USB hub found
[    1.000542] hub 1-0:1.0: 8 ports detected
[    1.001314] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.001326] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.001336] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.001362] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[    1.001516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.001519] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.001520] usb usb2: Product: UHCI Host Controller
[    1.001522] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.001524] usb usb2: SerialNumber: 0000:00:1d.0
[    1.001788] hub 2-0:1.0: USB hub found
[    1.001802] hub 2-0:1.0: 2 ports detected
[    1.002184] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.002195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.002206] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.002247] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[    1.002392] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.002394] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.002396] usb usb3: Product: UHCI Host Controller
[    1.002398] usb usb3: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.002399] usb usb3: SerialNumber: 0000:00:1d.1
[    1.002630] hub 3-0:1.0: USB hub found
[    1.002642] hub 3-0:1.0: 2 ports detected
[    1.003058] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.003548] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.003561] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.003573] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.003614] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[    1.003744] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.003746] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.003748] usb usb4: Product: UHCI Host Controller
[    1.003749] usb usb4: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.003751] usb usb4: SerialNumber: 0000:00:1d.2
[    1.003992] hub 4-0:1.0: USB hub found
[    1.004066] hub 4-0:1.0: 2 ports detected
[    1.004491] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.004502] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.004511] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.004547] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[    1.004663] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.004665] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.004667] usb usb5: Product: UHCI Host Controller
[    1.004669] usb usb5: Manufacturer: Linux 4.9.0-5-amd64 uhci_hcd
[    1.004670] usb usb5: SerialNumber: 0000:00:1d.3
[    1.004917] hub 5-0:1.0: USB hub found
[    1.004931] hub 5-0:1.0: 2 ports detected
[    1.005192] libata version 3.00 loaded.
[    1.006564] ata_piix 0000:00:1f.1: version 2.13
[    1.008148] Floppy drive(s): fd0 is 1.44M
[    1.011592] scsi host0: ata_piix
[    1.019621] scsi host1: ata_piix
[    1.019749] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x20b0 irq 14
[    1.019751] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x20b8 irq 15
[    1.019980] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.025871] scsi host2: ata_piix
[    1.026113] ata2: port disabled--ignoring
[    1.030523] scsi host3: ata_piix
[    1.030654] ata3: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
[    1.030656] ata4: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
[    1.036126] FDC 0 is a post-1991 82077
[    1.061158] e100 0000:04:08.0 eth0: addr 0x90000000, irq 20, MAC addr 00:19:d1:58:0f:1d
[    1.135980] e100 0000:04:08.0 enp4s8: renamed from eth0
[    1.254323] ata4.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
[    1.254327] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.254335] ata4.01: ATAPI: TSSTcorpDVD-ROM SH-D163A, SB01, max UDMA/33
[    1.329275] ata4.00: configured for UDMA/133
[    1.333774] ata4.01: configured for UDMA/33
[    1.334311] scsi 3:0:0:0: Direct-Access     ATA      ST380811AS       E    PQ: 0 ANSI: 5
[    1.336069] scsi 3:0:1:0: CD-ROM            TSSTcorp DVD-ROM SH-D163A SB01 PQ: 0 ANSI: 5
[    1.364487] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.364564] sd 3:0:0:0: [sda] Write Protect is off
[    1.364567] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.364599] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.402914] sr 3:0:1:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[    1.402918] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.403219] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    1.445267]  sda: sda1 sda2 < sda5 >
[    1.469697] sd 3:0:0:0: [sda] Attached SCSI disk
[    1.732031] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[    1.760023] tsc: Refined TSC clocksource calibration: 3191.999 MHz
[    1.760029] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c398820, max_idle_ns: 440795273435 ns
[    1.930077] usb 2-2: New USB device found, idVendor=046d, idProduct=c52f
[    1.930081] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.930083] usb 2-2: Product: USB Receiver
[    1.930085] usb 2-2: Manufacturer: Logitech
[    1.941203] hidraw: raw HID events driver (C) Jiri Kosina
[    1.948232] usbcore: registered new interface driver usbhid
[    1.948234] usbhid: USB HID core driver
[    1.951076] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:046D:C52F.0001/input/input3
[    1.951598] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[    1.954551] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:046D:C52F.0002/input/input4
[    2.014181] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[    2.281840] random: fast init done
[    2.369006] PM: Starting manual resume from disk
[    2.369014] PM: Hibernation image partition 8:5 present
[    2.369015] PM: Looking for hibernation image.
[    2.369302] PM: Image not found (code -22)
[    2.369304] PM: Hibernation image not present or could not be loaded.
[    2.624033] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.784381] clocksource: Switched to clocksource tsc
[    2.819086] usb 3-1: New USB device found, idVendor=248a, idProduct=8566
[    2.819090] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.819093] usb 3-1: Product: Wireless Receiver
[    2.819094] usb 3-1: Manufacturer: Telink
[    2.826579] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:248A:8566.0003/input/input5
[    2.885281] hid-generic 0003:248A:8566.0003: input,hidraw2: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.1-1/input0
[    2.890884] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:248A:8566.0004/input/input6
[    2.948399] hid-generic 0003:248A:8566.0004: input,hidraw3: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.1-1/input1
[    3.308039] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    3.492081] usb 5-2: New USB device found, idVendor=056a, idProduct=0300
[    3.492085] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.492087] usb 5-2: Product: CTL-471
[    3.492089] usb 5-2: Manufacturer: Wacom Co.,Ltd.
[    3.515768] input: Wacom Bamboo One S Pen as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:056A:0300.0005/input/input7
[    3.516662] wacom 0003:056A:0300.0005: hidraw4: USB HID v1.10 Mouse [Wacom Co.,Ltd. CTL-471] on usb-0000:00:1d.3-2/input0
[    7.655582] random: crng init done
[    9.684303] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   12.391480] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.575990] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   12.576320] systemd[1]: Detected architecture x86-64.
[   12.594690] systemd[1]: Set hostname to <debian>.
[   14.723443] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
[   14.724905] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.725103] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.725142] systemd[1]: Reached target Remote File Systems.
[   14.725243] systemd[1]: Listening on udev Kernel Socket.
[   14.725386] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   14.725418] systemd[1]: Reached target User and Group Name Lookups.
[   15.384934] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   15.570717] lp: driver loaded but no devices found
[   15.768548] systemd-journald[191]: Received request to flush runtime journal from PID 1
[   15.813822] ppdev: user-space parallel port driver
[   15.821848] parport_pc 00:05: reported by Plug and Play ACPI
[   15.821926] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[   15.916163] lp0: using parport0 (interrupt-driven).
[   19.769926] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13
[   19.769935] ACPI: Sleep Button [SLPB]
[   19.770048] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
[   19.770052] ACPI: Power Button [PWRF]
[   19.958513] [drm] Initialized
[   20.131537] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.295093] sd 3:0:0:0: Attached scsi generic sg0 type 0
[   20.295163] sr 3:0:1:0: Attached scsi generic sg1 type 5
[   20.615808] pci 0000:00:00.0: Intel 945G Chipset
[   20.615829] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[   20.615925] pci 0000:00:00.0: detected 8192K stolen memory
[   20.615954] [drm] Memory usable by graphics device = 256M
[   20.615959] [drm] Replacing VGA console driver
[   20.618602] Console: switching to colour dummy device 80x25
[   20.618724] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   20.618725] [drm] Driver supports precise vblank timestamp query.
[   20.619661] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.623086] intel_rng: FWH not detected
[   20.656185] [drm] RC6 disabled, disabling runtime PM support
[   20.656225] [drm] initialized overlay support
[   20.658338] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   20.684411] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x0000000000000429 (\GPE0) (20160831/utaddress-247)
[   20.684421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.684472] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   20.822898] fbcon: inteldrmfb (fb0) is primary device
[   20.905835] snd_hda_codec_realtek hdaudioC0D2: ALC883: SKU not ready 0x411111f0
[   20.908306] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   20.908309] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.908311] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   20.908312] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   20.908314] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   20.908316] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   20.908318] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   20.908319] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   20.931513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   20.932347] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   20.932407] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   20.932464] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   20.937583] Console: switching to colour frame buffer device 210x65
[   20.960363] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   21.036226] leds_ss4200: no LED devices found
[   21.105625] input: PC Speaker as /devices/platform/pcspkr/input/input19
[   21.212945] intel_powerclamp: No package C-state available
[   21.937992] iTCO_vendor_support: vendor-support=0
[   21.996612] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   21.996688] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   21.997449] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   25.129979] Adding 2084860k swap on /dev/sda5.  Priority:-1 extents:1 across:2084860k FS
[   94.809801] IPv6: ADDRCONF(NETDEV_UP): enp4s8: link is not ready
[   94.829057] IPv6: ADDRCONF(NETDEV_UP): enp4s8: link is not ready
[   94.832174] e100 0000:04:08.0 enp4s8: NIC Link is Up 100 Mbps Full Duplex
[   94.833140] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s8: link becomes ready
[  160.692175] fuse init (API version 7.26)
[ 2621.225858] perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 3531.274057] perf: interrupt took too long (3140 > 3137), lowering kernel.perf_event_max_sample_rate to 63500
[ 3772.406146] loop: module loaded
[ 3772.449777]  loop0: p1 p2
[ 4450.043180] perf: interrupt took too long (3941 > 3925), lowering kernel.perf_event_max_sample_rate to 50750
[ 8673.370579] perf: interrupt took too long (4935 > 4926), lowering kernel.perf_event_max_sample_rate to 40500
[13638.226725] perf: interrupt took too long (6172 > 6168), lowering kernel.perf_event_max_sample_rate to 32250
[16385.481544] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[16385.481599] mce: [Hardware Error]: Machine check events logged
[16385.482515] CPU0: Core temperature/speed normal
[16385.482522] mce: [Hardware Error]: Machine check events logged
[18019.607132] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8531)
[18019.607178] mce: [Hardware Error]: Machine check events logged
[18019.608104] CPU0: Core temperature/speed normal
[18019.608112] mce: [Hardware Error]: Machine check events logged
[20671.843480] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8534)
[20671.843524] mce: [Hardware Error]: Machine check events logged
[20671.844477] CPU0: Core temperature/speed normal
[20671.844485] mce: [Hardware Error]: Machine check events logged
[21195.327148] CPU0: Core temperature above threshold, cpu clock throttled (total events = 9748)
[21195.327187] mce: [Hardware Error]: Machine check events logged
[21195.328120] CPU0: Core temperature/speed normal
[21195.328128] mce: [Hardware Error]: Machine check events logged
[21703.350860] CPU0: Core temperature above threshold, cpu clock throttled (total events = 10057)
[21703.350904] mce: [Hardware Error]: Machine check events logged
[21703.351840] CPU0: Core temperature/speed normal
[21703.351848] mce: [Hardware Error]: Machine check events logged
[23758.539886] CPU0: Core temperature above threshold, cpu clock throttled (total events = 11780)
[23758.539934] mce: [Hardware Error]: Machine check events logged
[23758.540864] CPU0: Core temperature/speed normal
[23758.540874] mce: [Hardware Error]: Machine check events logged
[24589.076048] blk_update_request: I/O error, dev fd0, sector 0
[24589.076057] floppy: error -5 while reading block 0
[24617.628107] usb 5-2: USB disconnect, device number 2
[24625.056046] usb 1-8: new high-speed USB device number 5 using ehci-pci
[24625.232945] usb 1-8: New USB device found, idVendor=26bd, idProduct=9917
[24625.232950] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[24625.232953] usb 1-8: Product: USB DISK 2.0
[24625.232955] usb 1-8: Manufacturer:        
[24625.232956] usb 1-8: SerialNumber: 07087AFF1D1C7490
[24626.970664] usb-storage 1-8:1.0: USB Mass Storage device detected
[24626.973396] scsi host4: usb-storage 1-8:1.0
[24626.973597] usbcore: registered new interface driver usb-storage
[24627.003772] usbcore: registered new interface driver uas
[24628.011730] scsi 4:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 6
[24628.021914] sd 4:0:0:0: Attached scsi generic sg2 type 0
[24629.290901] sd 4:0:0:0: [sdb] 15654912 512-byte logical blocks: (8.02 GB/7.46 GiB)
[24629.295392] sd 4:0:0:0: [sdb] Write Protect is off
[24629.295399] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[24629.298631] sd 4:0:0:0: [sdb] No Caching mode page found
[24629.298641] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[24629.322917]  sdb: sdb1
[24629.338905] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[24759.204058] blk_update_request: I/O error, dev fd0, sector 0
[24759.204068] floppy: error -5 while reading block 0
[24759.522253]  sdb: sdb1
[24802.767040]  sdb:
[24805.788041] blk_update_request: I/O error, dev fd0, sector 0
[24805.788050] floppy: error -5 while reading block 0
[24806.001635]  sdb:
[24806.983546]  sdb:
[26012.456132] CPU0: Core temperature above threshold, cpu clock throttled (total events = 23362)
[26012.456177] mce: [Hardware Error]: Machine check events logged
[26012.457132] CPU0: Core temperature/speed normal
[26012.457141] mce: [Hardware Error]: Machine check events logged
[26254.305705]  sdb:
[26254.845989]  sdb: sdb1
[26257.971129]  sdb: sdb1
[26270.404074] blk_update_request: I/O error, dev fd0, sector 0
[26270.404083] floppy: error -5 while reading block 0
[26270.614874]  sdb: sdb1
[26289.406104]  sdb: sdb1
[26291.284086] blk_update_request: I/O error, dev fd0, sector 0
[26291.284098] floppy: error -5 while reading block 0
[26291.997279]  sdb: sdb1
[26292.133078]  sdb: sdb1
[26293.709782]  sdb: sdb1
[26374.428337] CPU0: Core temperature above threshold, cpu clock throttled (total events = 23391)
[26374.428386] mce: [Hardware Error]: Machine check events logged
[26374.429317] CPU0: Core temperature/speed normal
[26374.429324] mce: [Hardware Error]: Machine check events logged
[26674.428645] CPU0: Core temperature/speed normal
[26674.428658] mce: [Hardware Error]: Machine check events logged
[26974.432130] CPU0: Core temperature above threshold, cpu clock throttled (total events = 166413)
[26974.432169] mce: [Hardware Error]: Machine check events logged
[26974.433108] CPU0: Core temperature/speed normal
[26974.433115] mce: [Hardware Error]: Machine check events logged
[27274.432955] CPU0: Core temperature/speed normal
[27274.432967] mce: [Hardware Error]: Machine check events logged
[27463.698300] perf: interrupt took too long (7719 > 7715), lowering kernel.perf_event_max_sample_rate to 25750
[27574.433626] CPU0: Core temperature/speed normal
[27574.433639] mce: [Hardware Error]: Machine check events logged
[28481.827547] perf: interrupt took too long (9659 > 9648), lowering kernel.perf_event_max_sample_rate to 20500
[29205.502923] ISO 9660 Extensions: Microsoft Joliet Level 3
[29205.558321] ISO 9660 Extensions: RRIP_1991A
[29375.900926]  sdb:
[29376.964775]  sdb: sdb1
[29377.031754]  sdb: sdb1
[30184.337337] device-mapper: uevent: version 1.0.3
[30184.337701] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[30451.059846] usb 1-8: USB disconnect, device number 5
[30618.125697] perf: interrupt took too long (12114 > 12073), lowering kernel.perf_event_max_sample_rate to 16500
 


Edit à toto : Séparer la commande de son retour est plus lisible.

Hors ligne

#10 09-02-2018 07:18:39

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Il faudrait vérifier sur un autre PC que le graveur n’est pas HS

Hors ligne

#11 09-02-2018 10:19:07

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Salut
As tu essayé différent par USB? Il a t'il une indication comme quoi le graveur est alimenté (led )?

-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#12 09-02-2018 15:36:22

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Bonjour Croutons , où tu vois un graveur ?
Je n'ai pas de graveur interne. C'est juste un lecteur.

j'ai acheté un graveur externe.

"External Slim DVD-RW, SDRW-08D2S-U Lite"
"ASUS"

Hors ligne

#13 09-02-2018 16:09:45

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Tu l'as branché sur 2 ports USB 2 ? D'après les commentaires sur amazon si tu branches un seul port ce n'est pas suffisant

Il y a une petite led sur le devant, si tu mets un CD audio dedans pour le lire, est-ce qu'elle s'allume ?

Hors ligne

#14 09-02-2018 16:50:01

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Merci Chalu Le lecteur/graveur  est pris en compte.
Je vais essayé de graver une image iso.

Je ne sais pas encore si ça marche.

Je vais essayé.

Audacious ne marche pas bien quand j'écoute de la musique.

Je reviens pour le graveur...

je vais essayer avec ubuntu studio version supérieur pour voir si je peux booster dessus. C'est juste ue je peux le visualisé sans l'installer.

Je ne me rappel plus si avec DFlinux il y a l'option de l'essayer sans l'installer. Je le dis a cause de Debian.
Il n'y avait pas l'option "essayer sans l'installer" juste l'installer.

(...)

Dernière modification par Leoblue (09-02-2018 17:14:03)

Hors ligne

#15 09-02-2018 17:00:00

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Le coup des deux ports big_smile
Heureusement que tu as finalement donné le modèle du graveur car il aurait fallu attendre un utilisateur ayant cette situation pour y penser je crois wink

Hors ligne

#16 09-02-2018 17:02:32

Croutons
Membre
Distrib. : Debian12
Noyau : Linux 6.1.0-13-amd64
(G)UI : Fluxbox(NakeDeb)
Inscription : 16-12-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

où tu vois un graveur

non tu as raison dvd-rom pas forcement graveur, c'est moi acid.gif
j'ai vu une commande intéressante pour voir ce qui se passe quand tu branche ton graveur
Avant de brancher le graveur

tail -f /var/log/messages


Donne nous le retour des lignes qui vont apparaître dans ton terminale des que tu vas brancher le graveur


-->les cahiers du debutant<--      WikiDF-->Découvrir les principales commandes Linux<-- 
L' expérience, c'est le nom que chacun donne à ses erreurs. Oscar Wilde

Hors ligne

#17 09-02-2018 17:09:22

MicP
Membre
Inscription : 29-02-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Bonjour

Ce genre de cordon comporte deux connecteurs USB
afin de pouvoir fournir plus de courant à l'appareil
qu'un seul connecteur USB ne pourrait fournir.

Souvent, un de ces deux connecteurs ne comporte que deux pistes au lieu de 4 (N°1 et N°4),
il s'agit des pistes qui servent à connecter l'alimentation,
et parfois, ce connecteur USB est relié par un câble plus fin que l'autre.
C'est ce connecteur USB qu'il faut connecter en premier.

Sinon l'appareil n'a parfois pas assez de courant pour bien s'identifier
et le système risque de ne pas reconnaître correctement l'appareil
tant qu'il n'aura pas été déconnecté et reconnecté à la machine par ses deux connecteurs USB.

Dernière modification par MicP (09-02-2018 17:14:20)

Hors ligne

#18 09-02-2018 17:44:34

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Leoblue a écrit :

Je ne me rappel plus si avec DFlinux il y a l'option de l'essayer sans l'installer.


Oui DFlinux peut être testé avant installation

Hors ligne

#19 09-02-2018 18:11:29

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Micp 

j'ai branché le usb le plus fin en premier.

Crouton:

Voici la réponse du terminal root:

tail -f /var/log/messages



Feb  9 16:44:48 debian Thunar[3698]: gdk_window_set_icon_list: icons too large
Feb  9 16:44:53 debian Thunar[3698]: IA__gtk_tree_model_filter_get_model: assertion 'GTK_IS_TREE_MODEL_FILTER (filter)' failed
Feb  9 16:44:53 debian kernel: [ 9408.948222] Thunar[3698]: segfault at 18 ip 000055df07eecd66 sp 00007ffea9b5f880 error 4 in thunar[55df07e86000+b7000]
Feb  9 16:44:53 debian gvfsd-cdda[5500]: invalid unclassed pointer in cast to 'GVfsBackendCdda'
Feb  9 16:44:53 debian gvfsd-cdda[5490]: invalid unclassed pointer in cast to 'GVfsBackendCdda'
Feb  9 16:44:53 debian gvfsd-cdda[5500]: invalid unclassed pointer in cast to 'GVfsBackendCdda'
Feb  9 16:44:53 debian gvfsd-cdda[5490]: invalid unclassed pointer in cast to 'GVfsBackendCdda'
Feb  9 16:44:53 debian gvfsd-cdda[5474]: invalid unclassed pointer in cast to 'GVfsBackendCdda'
Feb  9 17:06:52 debian thunar-volman[5665]: gdk_window_set_icon_list: icons too large
Feb  9 18:04:47 debian kernel: [14203.116115] usb 5-2: USB disconnect, device number 3
Feb  9 18:06:21 debian kernel: [14297.248079] usb 1-7: new high-speed USB device number 6 using ehci-pci
Feb  9 18:06:21 debian kernel: [14297.401066] usb 1-7: New USB device found, idVendor=1c6b, idProduct=a223
Feb  9 18:06:21 debian kernel: [14297.401070] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb  9 18:06:21 debian kernel: [14297.401072] usb 1-7: Product: Mass Storage Device
Feb  9 18:06:21 debian kernel: [14297.401074] usb 1-7: Manufacturer: USB2.0 External
Feb  9 18:06:21 debian kernel: [14297.401076] usb 1-7: SerialNumber: 60 406719507023
Feb  9 18:06:21 debian kernel: [14297.407187] usb-storage 1-7:1.0: USB Mass Storage device detected
Feb  9 18:06:21 debian kernel: [14297.407620] scsi host4: usb-storage 1-7:1.0
Feb  9 18:06:22 debian mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7"
Feb  9 18:06:22 debian mtp-probe: bus: 1, device: 6 was not an MTP device
Feb  9 18:06:22 debian org.xfce.FileManager[1994]: thunar-volman: Périphérique USB de type « usb » non pris en charge.
Feb  9 18:06:22 debian org.xfce.FileManager[1994]: thunar-volman: Périphérique USB de type « usb-storage » non pris en charge.
Feb  9 18:06:22 debian kernel: [14298.447499] scsi 4:0:0:0: CD-ROM            ASUS     SDRW-08D2S-U     B911 PQ: 0 ANSI: 0
Feb  9 18:06:22 debian kernel: [14298.470417] sr 4:0:0:0: [sr1] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Feb  9 18:06:22 debian kernel: [14298.471924] sr 4:0:0:0: Attached scsi generic sg2 type 5

 



Je n'ai plus a essayer le dvd+rw pour voir si il  boot...

Hors ligne

#20 09-02-2018 18:21:39

chalu
Modératrice
Lieu : Anjou
Distrib. : openSUSE Tumbleweed
Noyau : Linux 5.12
(G)UI : KDE 5.21.4
Inscription : 11-03-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Tu as réussi à graver un DVD si je comprends bien ?
c'est résolu alors woohoo.gif
Voir le tuto : C'est résolu ! Bravo mais il faut l'indiquer dans l'titre.

Hors ligne

#21 09-02-2018 21:07:07

Leoblue
Membre
Distrib. : Debian GNU/Linux 9.3
Noyau : Linux 4.9.0-5-amd64 (x86_64)
Inscription : 22-11-2016

Re : (résolu)Périphérique dvd graveur externe non reconnu

Merci beaucoup à tous.

Mon graveur est bien reconnu.:)

Hors ligne

Pied de page des forums