dmesg -l crit,err,warn (messages d'erreurs)

Jean-Pierre Pinson · 12-03-2018 20:53:21

Résultats De la commande: dmesg -l crit,err,warn

# dmesg -l crit,err,warn

[    0.050036] DMAR-IR: [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled

[    0.050042] DMAR-IR: Failed to enable irq remapping. You are vulnerable to irq-injection attacks.

[    1.200690] pci 0000:00:01.0: ASPM: Could not configure common clock

[    1.496674] pci 0000:00:14.0: can't derive routing for PCI INT A

[    1.496675] pci 0000:00:14.0: PCI INT A: no GSI

[    3.055700] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A

[    3.055702] xhci_hcd 0000:00:14.0: PCI INT A: no GSI

[    7.986339] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)

[    7.986350] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)

[    7.986354] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)

[    7.986358] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)

[    7.986362] lpc_ich: Resource conflict(s) found affecting gpio_ich

[    8.008162] ACPI Warning: \_SB.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)

[    8.008195] ACPI Warning: \_SB.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)

[    8.025681] ------------[ cut here ]------------

[    8.025686] WARNING: CPU: 0 PID: 176 at /build/linux-YDazDa/linux-4.9.82/drivers/thunderbolt/switch.c:95 tb_wait_for_port+0x359/0x3f0 [thunderbolt]

[    8.025687] thunderbolt 0000:07:00.0: 0:0: does not have PHY

[    8.025688] Modules linked in: videobuf2_v4l2 videobuf2_core videodev media nouveau(+) intel_uncore(+) cfg80211 bcm5974 mxm_wmi snd_hda_core wmi lpc_ich mei_me snd_hwdep intel_rapl_perf pcspkr efivars(+) ttm i915(+) rfkill mei mfd_core thunderbolt(+) sg snd_pcm sbs acpi_als shpchp sbshc kfifo_buf snd_timer apple_gmux snd soundcore industrialio drm_kms_helper drm i2c_algo_bit video ac apple_bl button parport_pc ppdev lp parport efivarfs ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb mbcache hid_generic hid_apple usbhid hid uas usb_storage sd_mod crc32c_intel aesni_intel aes_x86_64 ahci glue_helper lrw gf128mul libahci ablk_helper cryptd libata xhci_pci ehci_pci i2c_i801 sdhci_pci xhci_hcd ehci_hcd scsi_mod i2c_smbus sdhci mmc_core usbcore usb_common

[    8.025737] CPU: 0 PID: 176 Comm: kworker/u16:5 Not tainted 4.9.0-6-amd64 #1 Debian 4.9.82-1+deb9u3

[    8.025738] Hardware name: Apple Inc. MacBookPro10,1/Mac-C3EC7CD22292981F, BIOS MBP101.88Z.00F2.B00.1708080809 08/08/2017

[    8.025741] Workqueue: thunderbolt tb_handle_hotplug [thunderbolt]

[    8.025742]  0000000000000000 ffffffff8fd2e074 ffffb97f81fcbd38 0000000000000000

[    8.025745]  ffffffff8fa776be 0000000000000000 ffffb97f81fcbd90 0000000000000000

[    8.025747]  ffff9e0dd7bf9800 0000000000000000 ffff9e0dd91cf908 ffffffff8fa7773f

[    8.025750] Call Trace:

[    8.025755]  [<ffffffff8fd2e074>] ? dump_stack+0x5c/0x78

[    8.025758]  [<ffffffff8fa776be>] ? __warn+0xbe/0xe0

[    8.025761]  [<ffffffff8fa7773f>] ? warn_slowpath_fmt+0x5f/0x80

[    8.025764]  [<ffffffffc0685f19>] ? tb_wait_for_port+0x359/0x3f0 [thunderbolt]

[    8.025766]  [<ffffffffc06852de>] ? tb_scan_port+0x4e/0x180 [thunderbolt]

[    8.025769]  [<ffffffffc06855bb>] ? tb_handle_hotplug+0x1ab/0x310 [thunderbolt]

[    8.025771]  [<ffffffff8fa90dca>] ? process_one_work+0x18a/0x420

[    8.025772]  [<ffffffff8fa910ad>] ? worker_thread+0x4d/0x490

[    8.025774]  [<ffffffff8fa91060>] ? process_one_work+0x420/0x420

[    8.025776]  [<ffffffff8fa970c9>] ? kthread+0xd9/0xf0

[    8.025778]  [<ffffffff8fa96ff0>] ? kthread_park+0x60/0x60

[    8.025780]  [<ffffffff90011537>] ? ret_from_fork+0x57/0x70

[    8.025783] ---[ end trace 08f6eb7968506178 ]---

[    8.041677] uvcvideo 1-1.1:1.0: Entity type for entity Processing 3 was not initialized!

[    8.041680] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!

[    8.105899] wl: loading out-of-tree module taints kernel.

[    8.105903] wl: module license 'MIXED/Proprietary' taints kernel.

[    8.105903] Disabling lock debugging due to kernel taint

[    8.244042] wlan0: Broadcom BCM4331 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)

[    9.271670] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS

[   13.659452] ERROR @wl_notify_scan_status : 

[   13.659456] wlp4s0 Scan_results error (-22)

Dernière modification par Jean-Pierre Pinson (13-03-2018 11:05:38)

Jean-Pierre Pinson · 13-03-2018 11:04:32

Résultats De la commande: lspci

$ lspci

00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)

01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)

01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)

01.2 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)

02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)

16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)

1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)

1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)

1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)

1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)

1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)

1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)

1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)

1f.3 SMBus: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller (rev 04)

00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 650M Mac Edition] (rev a1)

00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)

00.0 Ethernet controller: Broadcom Limited NetXtreme BCM57786 Gigabit Ethernet PCIe (rev 10)

00.1 SD Host controller: Broadcom Limited BCM57765/57785 SDXC/MMC Card Reader (rev 10)

00.0 Network controller: Broadcom Limited BCM4331 802.11a/b/g/n (rev 02)

00.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Controller [Cactus Ridge 4C 2012] (rev 03)

00.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Controller [Cactus Ridge 4C 2012] (rev 03)

03.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Controller [Cactus Ridge 4C 2012] (rev 03)

04.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Controller [Cactus Ridge 4C 2012] (rev 03)

05.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Controller [Cactus Ridge 4C 2012] (rev 03)

06.0 PCI bridge: Intel Corporation DSL3510 Thunderbolt Controller [Cactus Ridge 4C 2012] (rev 03)

00.0 System peripheral: Intel Corporation DSL3510 Thunderbolt Controller [Cactus Ridge 4C 2012] (rev 03)

Debian-facile

#1 12-03-2018 20:53:21

dmesg -l crit,err,warn (messages d'erreurs)

#2 13-03-2018 11:04:32

Re : dmesg -l crit,err,warn (messages d'erreurs)

Pied de page des forums