Carte graphique 82G33/G31 : où est le bon paquet ?

Lupa · 02-04-2018 14:42:51

Bonjour à tous

Qu'est-ce qu'elle a, ma carte graphique, pour être si difficile à installer ?

Voici le profil hardware du vieux tromblon :

02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 0a)

02.1 Display controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 0a)

1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)

1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)

1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)

1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)

1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)

1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)

1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)

1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)

1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)

1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)

1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)

1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)

00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)

J'ai installé des tas de paquets... pour les désinstaller, mais rien n'y fait.

J'ai consulté ceci : https://wiki.debian.org/fr/GraphicsCard
et cela aussi : https://doc.ubuntu-fr.org/intel_graphics

Je me goure, mais... où ??

Merci

èfpé · 02-04-2018 16:18:42

Bonjour Lupa,

Pourrais-tu nous en dire un petit peu plus sur le problème ? en quoi est-ce si difficile à installer ?

lspci -nnk | egrep -A2 'VGA|Display'

cat /var/log/Xorg.0.log

xrandr --query

dmesg | egrep 'DMI:|firmware'

edit: correction de la commande lscpi

Ces commandes nous en diront davantage à propos du vieux tromblon ;

apt policy xserver-xorg-video-intel

Nous dira si le paquet est installé ; l'utilisation de ce pilote n'est plus recommandée mais 2007...

Dernière modification par èfpé (02-04-2018 21:28:42)

Lupa · 02-04-2018 16:43:25

Bonjour, èfpé.

Je donne le retour de ces commandes. Là, l'ordi est en sauvegarde Clonezilla.

Le problème est simple : la résolution n'est pas correcte. Par exemple, sous double-commander, je dois y aller avec la souris pour agrandir la fenête, et non pas CTRL+ALT+x . On dirait que la cg n'est pas gérée...

Lupa · 02-04-2018 18:34:04

Voilà ! CloneZilla a planté, et j'ai dû vérifier le disque. D'où mon retard à l'allumage.

root@deb-partages:~# lspci -nnk | grep -A3 82G33

00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 0a)

  Subsystem: Dell Device [1028:0294]

  Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 0a)

  Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 0a)

  Subsystem: Dell Device [1028:0294]

  Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c3] (rev 0a)

  Subsystem: Dell Device [1028:0294]

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)

  Subsystem: Dell Device [1028:0294]

cat /var/log/Xorg.0.log

[    25.806] 

X.Org X Server 1.16.4

Release Date: 2014-12-20

[    25.806] X Protocol Version 11, Revision 0

[    25.806] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[    25.806] Current Operating System: Linux deb-partages 3.16.0-4-amd64 #1 SMP Debian 3.16.51-3 (2017-12-13) x86_64

[    25.806] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=d6e4d0f6-bc49-422e-8723-c949bb9140fc ro quiet

[    25.806] Build Date: 14 October 2017  10:41:31AM

[    25.806] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support) 

[    25.806] Current version of pixman: 0.32.6

[    25.806]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    25.806] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    25.807] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr  2 19:12:45 2018

[    26.262] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    26.621] (==) No Layout section.  Using the first Screen section.

[    26.621] (==) No screen section available. Using defaults.

[    26.621] (**) |-->Screen "Default Screen Section" (0)

[    26.621] (**) |   |-->Monitor "<default monitor>"

[    26.661] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    26.661] (==) Automatically adding devices

[    26.661] (==) Automatically enabling devices

[    26.661] (==) Automatically adding GPU devices

[    27.348] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    27.348]  Entry deleted from font path.

[    27.549] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[    27.549] (==) ModulePath set to "/usr/lib/xorg/modules"

[    27.549] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    27.880] (II) Loader magic: 0x562d20865d80

[    27.880] (II) Module ABI versions:

[    27.880]  X.Org ANSI C Emulation: 0.4

[    27.880]  X.Org Video Driver: 18.0

[    27.880]  X.Org XInput driver : 21.0

[    27.880]  X.Org Server Extension : 8.0

[    27.880] (II) xfree86: Adding drm device (/dev/dri/card0)

[    27.881] (--) PCI:*(0:0:2:0) 8086:29c2:1028:0294 rev 10, Mem @ 0xdfe00000/524288, 0xc0000000/268435456, 0xdff00000/1048576, I/O @ 0x0000ecd8/8

[    27.881] (--) PCI: (0:0:2:1) 8086:29c3:1028:0294 rev 10, Mem @ 0xdfe80000/524288

[    27.900] (II) LoadModule: "glx"

[    28.015] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    28.951] (II) Module glx: vendor="X.Org Foundation"

[    28.951]  compiled for 1.16.4, module version = 1.0.0

[    28.951]  ABI class: X.Org Server Extension, version 8.0

[    28.951] (==) AIGLX enabled

[    28.951] (==) Matched intel as autoconfigured driver 0

[    28.951] (==) Matched intel as autoconfigured driver 1

[    28.951] (==) Matched modesetting as autoconfigured driver 2

[    28.951] (==) Matched fbdev as autoconfigured driver 3

[    28.951] (==) Matched vesa as autoconfigured driver 4

[    28.951] (==) Assigned the driver to the xf86ConfigLayout

[    28.951] (II) LoadModule: "intel"

[    28.970] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

[    29.607] (II) Module intel: vendor="X.Org Foundation"

[    29.607]  compiled for 1.16.4, module version = 2.99.917

[    29.607]  Module class: X.Org Video Driver

[    29.607]  ABI class: X.Org Video Driver, version 18.0

[    29.607] (II) LoadModule: "modesetting"

[    29.608] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    29.777] (II) Module modesetting: vendor="X.Org Foundation"

[    29.777]  compiled for 1.16.4, module version = 0.9.0

[    29.777]  Module class: X.Org Video Driver

[    29.777]  ABI class: X.Org Video Driver, version 18.0

[    29.777] (II) LoadModule: "fbdev"

[    29.777] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    29.840] (II) Module fbdev: vendor="X.Org Foundation"

[    29.840]  compiled for 1.15.99.904, module version = 0.4.4

[    29.840]  Module class: X.Org Video Driver

[    29.840]  ABI class: X.Org Video Driver, version 18.0

[    29.840] (II) LoadModule: "vesa"

[    29.840] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    29.992] (II) Module vesa: vendor="X.Org Foundation"

[    29.992]  compiled for 1.15.99.904, module version = 2.3.3

[    29.992]  Module class: X.Org Video Driver

[    29.992]  ABI class: X.Org Video Driver, version 18.0

[    29.992] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:

  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,

  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,

  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,

  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43

[    29.993] (II) intel: Driver for Intel(R) HD Graphics

[    29.993] (II) intel: Driver for Intel(R) Iris(TM) Graphics

[    29.993] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics

[    29.993] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    29.993] (II) FBDEV: driver for framebuffer: fbdev

[    29.993] (II) VESA: driver for VESA chipsets: vesa

[    29.993] (++) using VT number 7

[    30.028] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730

[    30.028] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20161206-1~bpo8+1 (Vincent Cheng <vcheng@debian.org>)

[    30.028] (II) intel(0): SNA compiled for use with valgrind

[    30.072] (WW) Falling back to old probe method for modesetting

[    30.072] (WW) Falling back to old probe method for fbdev

[    30.072] (II) Loading sub module "fbdevhw"

[    30.072] (II) LoadModule: "fbdevhw"

[    30.072] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    30.125] (II) Module fbdevhw: vendor="X.Org Foundation"

[    30.125]  compiled for 1.16.4, module version = 0.0.2

[    30.125]  ABI class: X.Org Video Driver, version 18.0

[    30.125] (WW) Falling back to old probe method for vesa

[    30.147] (--) intel(0): Integrated Graphics Chipset: Intel(R) G33

[    30.147] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1; using a maximum of 2 threads

[    30.147] (II) intel(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    30.147] (==) intel(0): Depth 24, (--) framebuffer bpp 32

[    30.147] (==) intel(0): RGB weight 888

[    30.147] (==) intel(0): Default visual is TrueColor

[    30.148] (II) intel(0): Output VGA1 has no monitor section

[    30.148] (II) intel(0): Enabled output VGA1

[    30.148] (--) intel(0): Using a maximum size of 256x256 for hardware cursors

[    30.148] (II) intel(0): Output VIRTUAL1 has no monitor section

[    30.148] (II) intel(0): Enabled output VIRTUAL1

[    30.148] (--) intel(0): Output VGA1 using initial mode 1440x900 on pipe 0

[    30.148] (==) intel(0): TearFree disabled

[    30.148] (==) intel(0): DPI set to (96, 96)

[    30.148] (II) Loading sub module "dri3"

[    30.148] (II) LoadModule: "dri3"

[    30.148] (II) Module "dri3" already built-in

[    30.148] (II) Loading sub module "dri2"

[    30.148] (II) LoadModule: "dri2"

[    30.148] (II) Module "dri2" already built-in

[    30.148] (II) Loading sub module "present"

[    30.148] (II) LoadModule: "present"

[    30.148] (II) Module "present" already built-in

[    30.148] (II) UnloadModule: "modesetting"

[    30.148] (II) Unloading modesetting

[    30.148] (II) UnloadModule: "fbdev"

[    30.148] (II) Unloading fbdev

[    30.148] (II) UnloadSubModule: "fbdevhw"

[    30.148] (II) Unloading fbdevhw

[    30.148] (II) UnloadModule: "vesa"

[    30.148] (II) Unloading vesa

[    30.148] (==) Depth 24 pixmap format is 32 bpp

[    30.250] (II) intel(0): SNA initialized with Alviso (gen3) backend

[    30.250] (==) intel(0): Backing store enabled

[    30.250] (==) intel(0): Silken mouse enabled

[    30.268] (II) intel(0): HW Cursor enabled

[    30.268] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    30.295] (==) intel(0): DPMS enabled

[    30.295] (==) intel(0): Display hotplug detection enabled

[    30.337] (II) intel(0): [XvMC] i915_xvmc driver initialized.

[    30.337] (II) intel(0): [DRI2] Setup complete

[    30.337] (II) intel(0): [DRI2]   DRI driver: i915

[    30.337] (II) intel(0): [DRI2]   VDPAU driver: va_gl

[    30.337] (II) intel(0): direct rendering: DRI2 enabled

[    30.337] (II) intel(0): hardware support for Present enabled

[    30.337] (--) RandR disabled

[    30.377] (II) SELinux: Disabled on system

[    31.162] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    31.162] (II) AIGLX: enabled GLX_ARB_create_context

[    31.162] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    31.162] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile

[    31.162] (II) AIGLX: enabled GLX_INTEL_swap_event

[    31.162] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control

[    31.162] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    31.162] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    31.162] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    31.162] (II) AIGLX: Loaded and initialized i915

[    31.162] (II) GLX: Initialized DRI2 GL provider for screen 0

[    31.272] (II) intel(0): switch to mode 1440x900@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none

[    31.273] (II) intel(0): Setting screen physical size to 381 x 238

[    33.870] (II) config/udev: Adding input device Power Button (/dev/input/event4)

[    33.870] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    33.870] (II) LoadModule: "evdev"

[    33.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

[    34.196] (II) Module evdev: vendor="X.Org Foundation"

[    34.196]  compiled for 1.16.0, module version = 2.9.0

[    34.196]  Module class: X.Org XInput Driver

[    34.196]  ABI class: X.Org XInput driver, version 21.0

[    34.196] (II) Using input driver 'evdev' for 'Power Button'

[    34.196] (**) Power Button: always reports core events

[    34.196] (**) evdev: Power Button: Device: "/dev/input/event4"

[    34.196] (--) evdev: Power Button: Vendor 0 Product 0x1

[    34.196] (--) evdev: Power Button: Found keys

[    34.196] (II) evdev: Power Button: Configuring as keyboard

[    34.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4"

[    34.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[    34.196] (**) Option "xkb_rules" "evdev"

[    34.196] (**) Option "xkb_model" "pc105"

[    34.196] (**) Option "xkb_layout" "fr"

[    34.196] (**) Option "xkb_variant" "latin9"

[    35.321] (II) config/udev: Adding input device Power Button (/dev/input/event3)

[    35.321] (**) Power Button: Applying InputClass "evdev keyboard catchall"

[    35.321] (II) Using input driver 'evdev' for 'Power Button'

[    35.321] (**) Power Button: always reports core events

[    35.321] (**) evdev: Power Button: Device: "/dev/input/event3"

[    35.321] (--) evdev: Power Button: Vendor 0 Product 0x1

[    35.321] (--) evdev: Power Button: Found keys

[    35.321] (II) evdev: Power Button: Configuring as keyboard

[    35.321] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event3"

[    35.321] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[    35.321] (**) Option "xkb_rules" "evdev"

[    35.321] (**) Option "xkb_model" "pc105"

[    35.321] (**) Option "xkb_layout" "fr"

[    35.321] (**) Option "xkb_variant" "latin9"

[    35.322] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)

[    35.322] (II) No input driver specified, ignoring this device.

[    35.322] (II) This device may have been added with another device file.

[    35.322] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)

[    35.322] (II) No input driver specified, ignoring this device.

[    35.322] (II) This device may have been added with another device file.

[    35.322] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)

[    35.322] (II) No input driver specified, ignoring this device.

[    35.322] (II) This device may have been added with another device file.

[    35.322] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)

[    35.322] (II) No input driver specified, ignoring this device.

[    35.322] (II) This device may have been added with another device file.

[    35.323] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)

[    35.323] (II) No input driver specified, ignoring this device.

[    35.323] (II) This device may have been added with another device file.

[    35.323] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event0)

[    35.323] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    35.323] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'

[    35.323] (**) Logitech USB Keyboard: always reports core events

[    35.323] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event0"

[    35.323] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c

[    35.323] (--) evdev: Logitech USB Keyboard: Found keys

[    35.323] (II) evdev: Logitech USB Keyboard: Configuring as keyboard

[    35.323] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:046D:C31C.0001/input/input3/event0"

[    35.323] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 8)

[    35.323] (**) Option "xkb_rules" "evdev"

[    35.323] (**) Option "xkb_model" "pc105"

[    35.323] (**) Option "xkb_layout" "fr"

[    35.323] (**) Option "xkb_variant" "latin9"

[    35.323] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)

[    35.323] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"

[    35.323] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'

[    35.323] (**) Logitech USB Keyboard: always reports core events

[    35.323] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"

[    35.324] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c

[    35.324] (--) evdev: Logitech USB Keyboard: Found absolute axes

[    35.324] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.

[    35.324] (--) evdev: Logitech USB Keyboard: Found keys

[    35.324] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.

[    35.324] (II) evdev: Logitech USB Keyboard: Configuring as mouse

[    35.324] (II) evdev: Logitech USB Keyboard: Configuring as keyboard

[    35.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:046D:C31C.0002/input/input4/event1"

[    35.324] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)

[    35.324] (**) Option "xkb_rules" "evdev"

[    35.324] (**) Option "xkb_model" "pc105"

[    35.324] (**) Option "xkb_layout" "fr"

[    35.324] (**) Option "xkb_variant" "latin9"

[    35.324] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.

[    35.324] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1

[    35.324] (**) Logitech USB Keyboard: (accel) acceleration profile 0

[    35.324] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000

[    35.324] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4

[    35.324] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)

[    35.324] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"

[    35.324] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'

[    35.324] (**) Logitech USB Optical Mouse: always reports core events

[    35.324] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event2"

[    35.324] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077

[    35.324] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons

[    35.324] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)

[    35.324] (--) evdev: Logitech USB Optical Mouse: Found relative axes

[    35.324] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes

[    35.324] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse

[    35.324] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support

[    35.324] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5

[    35.324] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200

[    35.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:046D:C077.0003/input/input5/event2"

[    35.324] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)

[    35.324] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.

[    35.325] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1

[    35.325] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0

[    35.325] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000

[    35.325] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4

[    35.325] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)

[    35.325] (II) No input driver specified, ignoring this device.

[    35.325] (II) This device may have been added with another device file.

[    35.325] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)

[    35.325] (II) No input driver specified, ignoring this device.

[    35.325] (II) This device may have been added with another device file.

[    35.444] (II) intel(0): EDID vendor "BTC", prod id 6576

[    35.444] (II) intel(0): Using EDID range info for horizontal sync

[    35.444] (II) intel(0): Using EDID range info for vertical refresh

[    35.444] (II) intel(0): Printing DDC gathered Modelines:

[    35.444] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    35.444] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    35.444] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    35.444] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    35.444] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[    35.444] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    35.444] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    35.444] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    35.444] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    35.444] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[    35.444] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    35.444] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    35.444] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    35.444] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    35.444] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    35.444] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    35.444] (II) intel(0): Modeline "640x480"x66.0   26.87  640 664 728 816  480 481 484 499 -hsync +vsync (32.9 kHz e)

[    35.444] (II) intel(0): Modeline "1024x768"x66.0   71.63  1024 1080 1192 1360  768 769 772 798 -hsync +vsync (52.7 kHz e)

[    35.444] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    35.444] (II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)

[    35.444] (II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

root@deb-partages:~# xrandr --query

Screen 0: minimum 8 x 8, current 1440 x 900, maximum 32767 x 32767

VGA1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 260mm

   1440x900      59.89*+  74.98  

   1280x1024     75.02    60.02  

   1152x864      75.00  

   1024x768      75.08    70.07    66.01    60.00  

   832x624       74.55  

   800x600       72.19    75.00    60.32    56.25  

   640x480       75.00    72.81    66.67    66.03    60.00  

   720x400       70.08  

VIRTUAL1 disconnected (normal left inverted right x axis y axis)

root@deb-partages:~# dmesg | egrep 'DMI:|firmware'

[    0.000000] DMI: Dell Inc. OptiPlex 360                 /0T656F, BIOS A01 11/28/2008

intel_rng: don't want to disable this in firmware setup, and if

root@deb-partages:~# apt policy xserver-xorg-video-intel

E: L'opération policy n'est pas valable

J'ai tout saisi en root, parce que là, j'installe. Et je préfère le faire en root.
Qu'est-ce que signifie cette erreur : E: L'opération policy n'est pas valable[ ? J'ai cherché sur le Net, mais rien trouvé de très parlant.

èfpé · 02-04-2018 19:04:43

Re-,

OK ; alors déjà, ton profil hybride n'est pas à jour, apparemment tu es sous Debian 8 Jessie.

apt-cache policy xserver-xorg-video-intel

est la commande valide pour ton système, pour le reste je regarde tranquillement et je re

anonyme · 02-04-2018 20:05:52

pourquoi tu migre pas sur stretch ?
la commande lspci

lspci

 

retour

00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)

01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)

1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)

1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)

1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)

1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)

1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)

1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)

1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)

1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)

1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)

1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)

1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)

1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)

1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)

1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)

1f.2 SATA controller: Intel Corporation 82801IB (ICH9) 4 port SATA Controller [AHCI mode] (rev 02)

1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)

00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050] (rev a1)

00.1 Audio device: NVIDIA Corporation Device 0fb9 (rev a1)

00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)

00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller

02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)

le noyau

uname -a

 

retour

Linux debian7 4.9.0-6-amd64 #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) x86_64 GNU/Linux

 

le cpu

lscpu

Architecture :        x86_64

Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit

Boutisme :            Little Endian

Processeur(s) :       4

Liste de processeur(s) en ligne : 0-3

Thread(s) par cœur : 1

Cœur(s) par socket : 4

Socket(s) :           1

Nœud(s) NUMA :       1

Identifiant constructeur : GenuineIntel

Famille de processeur : 6

Modèle :             23

Nom de modèle :      Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz

Révision :           10

Vitesse du processeur en MHz : 2830.000

Vitesse maximale du processeur en MHz : 2830,0000

Vitesse minimale du processeur en MHz : 1998,0000

BogoMIPS :            5666.75

Virtualisation :      VT-x

Cache L1d :           32K

Cache L1i :           32K

Cache L2 :            6144K

Nœud NUMA 0 de processeur(s) : 0-3

Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf eagerfpu pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm kaiser tpr_shadow vnmi flexpriority dtherm

la version de debian

cat /etc/os-release

 

retour

PRETTY_NAME="Debian GNU/Linux 9 (stretch)"

NAME="Debian GNU/Linux"

VERSION_ID="9"

VERSION="9 (stretch)"

ID=debian

HOME_URL="https://www.debian.org/"

SUPPORT_URL="https://www.debian.org/support"

BUG_REPORT_URL="https://bugs.debian.org/"

le seul souci avec ta machine c'est le processeur dont tu dispose et la carte vidéo a améliorer (j'utilise une 1050 qui fonctionne très bien )
sinon avec stretch rien a faire (peut etre utiliser le firmware-misc-nonfree ) et voir si KMS fonctionne mieux que le paquet xserver-xorg-video-intel

j'ai du P5K-VM et du P5KC en Asus qui tourne sous stretch (la P5K-VM a le meme chipset vidéo que le tien G31/33 ) idem pour MSI et Asrock ça peu tourner encore sans problème
juste voir si tu peu investir dans une carte vidéo (win10 tourne aussi sur ce genre de matériel )

rappel : jessie a un paquet xserver-xorg-video-modesetting , qui devient virtuel pour stretch

utiliser un noyau 4.9.0-3 avec jessie peut etre pas une bonne idée (si ton profil est correct .... )

un dual core a 2ghz c'est correct , donc précise le cpu qui est installé sur ta machine
avec stretch qui est la stable actuelle tu est tranquille pour un moment

la P5K-VM => https://www.asus.com/fr/Motherboards/P5KVM/

si vraiment c'est nécessaire je peu tester stretch sur la P5K-VM avec le chipset vidéo intégré , firefox-ESR va faire la grimace

Dernière modification par anonyme (02-04-2018 20:19:32)

Lupa · 02-04-2018 20:29:51

Pour lspci :

00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 0a)

01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 0a)

02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 0a)

02.1 Display controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 0a)

1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)

1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)

1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)

1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)

1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)

1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)

1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)

1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)

1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)

1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)

1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)

1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)

00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)

Pour la carte :

root@deb-partages:~# apt-cache policy xserver-xorg-video-intel

xserver-xorg-video-intel:

  Installé : 2:2.99.917+git20161206-1~bpo8+1

  Candidat : 2:2.99.917+git20161206-1~bpo8+1

 Table de version :

 *** 2:2.99.917+git20161206-1~bpo8+1 0

        100 /var/lib/dpkg/status

Pardon : oui, effectivement, je suis sous Jessie. J'aurais dû le préciser.
J'ai débuté sous Stretch : l'enfer pour utiliser Samba ! C'était ingérable, pour les réseaux. Du coup, je suis passé à Jessie. Je n'aurais pas osé installer mon serveur Apache sous Stretch !

Pour le CPU :

root@deb-partages:~# lscpu

Architecture :        x86_64

Mode(s) opératoire(s) des processeurs : 32-bit, 64-bit

Boutisme :            Little Endian

Processeur(s) :       2

Liste de processeur(s) en ligne : 0,1

Thread(s) par cœur : 1

Cœur(s) par socket : 2

Socket(s) :           1

Nœud(s) NUMA :       1

Identifiant constructeur : GenuineIntel

Famille de processeur : 6

Modèle :             23

Nom de modèle :      Intel(R) Core(TM)2 Duo CPU     E7400  @ 2.80GHz

Révision :           10

Vitesse du processeur en MHz : 2792.848

BogoMIPS :            5585.69

Cache L1d :           32K

Cache L1i :           32K

Cache L2 :            3072K

Nœud NUMA 0 de processeur(s) : 0,1

Qu'est-ce qui cloche ? L'écran 19 pouces ?

èfpé · 02-04-2018 21:10:42

@Lupa,

Pour quelle raison as-tu installé la version jessie-backports du paquet xserver-xorg-video-intel ?

apt-cache policy xserver-xorg-video-modesetting

uname -srv

xrandr --properties

Peux-tu donner les références de l'écran 19 pouces utilisé ? ou du moins sa définition native ?

Dernière modification par èfpé (02-04-2018 23:00:42)

Lupa · 02-04-2018 22:15:09

P*** !!!
Je viens d'avoir le même problème avec le serveur !! Je l'ai déplacé de ma salle informatique dans mon bureau, sa place définitive.
Avec un autre écran, moins large. Résolution d'écran perdue !
Je lui remets l'écran avec lequel il a été installé : même merdier.
Je change le câble VGA : c'est réglé sur le serveur !

Je vais voir la résolution native de l'écran branché au vieil Optiplex. Ca vient peut-être tout simplement de là : sa résolution native !! J'ai déjà changé de câble VGA : pas d'amélioration.

Je saisis quelle commande, pour le savoir ?
Je vais vérifier avec xrandr : je donne le retour tout de suite.

Voilà :

root@deb-partages:~# xrandr

Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767

VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm

   1024x768      60.00* 

   800x600       60.32    56.25  

   848x480       60.00  

   640x480       59.94  

VIRTUAL1 disconnected (normal left inverted right x axis y axis)

Et ici https://doc.ubuntu-fr.org/xrandr il est bien précisé que l'on peut forcer la résolution de l'écran.
Mais la commande

xrandr --addmode VGA1 1280x1024_60.00

 

ne passe pas sous Jessie... C'est bien syntaxique. Il me faudrait du 1440×900.

Dernière modification par Lupa (02-04-2018 22:35:48)

èfpé · 02-04-2018 23:12:42

@Lupa,

Le retour de xrandr n'est plus le même qu'en #4 ; je renonce à tenter de comprendre ton souci.

anonyme · 03-04-2018 00:48:20

tu a le paquet des backports de jessie => https://packages.debian.org/fr/jessie-b … ideo-intel

backport  2:2.99.917+git20161206-1~bpo8+1

Installé :  2:2.99.917+git20161206-1~bpo8+1

pourquoi utiliser les backports si tu pense que stretch est le "mal"

de plus ce que donne le retour des commandes semble correct , il semblerait qu'il n'y pas de problèmes
ton Xorg.0.log renvoie

[    30.148] (--) intel(0): Output VGA1 using initial mode 1440x900 on pipe 0

 

une explication pour ceci

[    27.881] (--) PCI:*(0:0:2:0) 8086:29c2:1028:0294 rev 10, Mem @ 0xdfe00000/524288, 0xc0000000/268435456, 0xdff00000/1048576, I/O @ 0x0000ecd8/8

[    27.881] (--) PCI: (0:0:2:1) 8086:29c3:1028:0294 rev 10, Mem @ 0xdfe80000/524288

le serveur X voit 2 matériel en 2:0 et 2:1

ici encore cela semble correct

Screen 0: minimum 8 x 8, current 1440 x 900, maximum 32767 x 32767

VGA1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 410mm x 260mm

   1440x900      59.89*+  74.98

tu force DRI3 avec un xorg.conf ? (dans /etc/X11/xorg.conf ou dans /etc/X11/xorg.conf.d/ )

[    30.148] (II) Loading sub module "dri3"

[    30.148] (II) LoadModule: "dri3"

[    30.148] (II) Module "dri3" already built-in

[    30.148] (II) Loading sub module "dri2"

[    30.148] (II) LoadModule: "dri2"

[    30.148] (II) Module "dri2" already built-in

[    30.148] (II) Loading sub module "present"

[    30.148] (II) LoadModule: "present"

[    30.148] (II) Module "present" already built-in

ceci aussi demande explications

[    30.148] (II) intel(0): Enabled output VGA1

[    30.148] (--) intel(0): Using a maximum size of 256x256 for hardware cursors

[    30.148] (II) intel(0): Output VIRTUAL1 has no monitor section

[    30.148] (II) intel(0): Enabled output VIRTUAL1

[    30.148] (--) intel(0): Output VGA1 using initial mode 1440x900 on pipe 0

c'est quoi ce VIRTUAL1 ?

au vu de ton #4 je dirai que tout va bien

[    30.295] (==) intel(0): DPMS enabled

[    30.295] (==) intel(0): Display hotplug detection enabled

[    30.337] (II) intel(0): [XvMC] i915_xvmc driver initialized.

[    30.337] (II) intel(0): [DRI2] Setup complete

[    30.337] (II) intel(0): [DRI2]   DRI driver: i915

[    30.337] (II) intel(0): [DRI2]   VDPAU driver: va_gl

[    30.337] (II) intel(0): direct rendering: DRI2 enabled

[    30.337] (II) intel(0): hardware support for Present enabled

[    30.337] (--) RandR disabled

[    30.377] (II) SELinux: Disabled on system

[    31.162] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    31.162] (II) AIGLX: enabled GLX_ARB_create_context

[    31.162] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    31.162] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile

[    31.162] (II) AIGLX: enabled GLX_INTEL_swap_event

[    31.162] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control

[    31.162] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    31.162] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    31.162] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    31.162] (II) AIGLX: Loaded and initialized i915

[    31.162] (II) GLX: Initialized DRI2 GL provider for screen 0

[    31.272] (II) intel(0): switch to mode 1440x900@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none

[    31.273] (II) intel(0): Setting screen physical size to 381 x 238

ton 19 pouces est bien en 1440x900@60.0 (ce qui correspond a la définition native de mes 19 pouces plus tout jeune )

normalement une installation neuve avec ce matériel ne devrait pas poser de soucis

peut etre donner la référence exacte de ta carte mère

Dernière modification par anonyme (03-04-2018 01:20:02)

anonyme · 03-04-2018 19:09:15

Bonjour
j' installe jessie sur une P5K-VM qui se rapproche le plus de ta carte mère.
ça va prendre un peu de temps ..........

, un cpu dual core E6550 @2.33Ghz et 4Go de ddr2 a 667Mhz , un DD de 40Go
bureau Mate + lightdm

voila terminée , le sources.list

#jessie 8

deb http://security.debian.org/ jessie/updates main contrib non-free

deb http://ftp.debian.org/debian/ jessie-updates main contrib non-free

deb http://ftp.debian.org/debian/ jessie main contrib non-free

pour l'instant je n'ai utilisé aucun paquet "non-free"

xrandr

 

retour

Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096

VGA1 disconnected (normal left inverted right x axis y axis)

VGA2 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm

   1440x900      59.89*+  74.98  

   1280x1024     75.02    60.02  

   1280x800      59.81  

   1152x864      75.00  

   1024x768      75.08    70.07    60.00  

   832x624       74.55  

   800x600       72.19    75.00    60.32    56.25  

   640x480       75.00    72.81    66.67    60.00  

   720x400       70.08

les commandes que éfpé t'a demandé

apt-cache policy xserver-xorg-video-modesetting

 

retour

xserver-xorg-video-modesetting:

  Installé : 0.9.0-2

  Candidat : 0.9.0-2

 Table de version :

 *** 0.9.0-2 0

        500 http://ftp.debian.org/debian/ jessie/main amd64 Packages

        100 /var/lib/dpkg/status

uname -srv

 

retour

Linux 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08)

 

xrandr --properties

 

retour

Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096

VGA1 disconnected (normal left inverted right x axis y axis)

VGA2 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm

  EDID: 

    00ffffffffffff0004721e004b541095

    331301036828196b2a6760a25a499e23

    135054bfef00818f8180950f95008100

    714f010101019a29a0d0518422305098

    360098ff1000001c000000ff004c4254

    3038303434343231340a000000fd0037

    4b1e530e000a202020202020000000fc

    00416365722042313933570a20200015

   1440x900      59.89*+  74.98  

   1280x1024     75.02    60.02  

   1280x800      59.81  

   1152x864      75.00  

   1024x768      75.08    70.07    60.00  

   832x624       74.55  

   800x600       72.19    75.00    60.32    56.25  

   640x480       75.00    72.81    66.67    60.00  

   720x400       70.08

le lspci

lspci

 

retour

00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)

02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)

02.1 Display controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)

1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)

1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)

1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)

1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)

1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)

1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)

1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)

1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)

1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)

1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)

1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)

1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)

1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)

1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)

1f.2 SATA controller: Intel Corporation 82801IB (ICH9) 4 port SATA Controller [AHCI mode] (rev 02)

1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)

00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)

00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller

01.0 Network controller: Ralink corp. RT2500 Wireless 802.11bg (rev 01)

02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)

il n'y a besoin d'aucun paquet supplémentaire Jessie (de 2014) prend bien en charge du matériel de 2007 - 2008

enfin un truc que j'aime bien
le log de X

[    19.872] 

X.Org X Server 1.16.4

Release Date: 2014-12-20

[    19.872] X Protocol Version 11, Revision 0

[    19.872] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[    19.872] Current Operating System: Linux P5K-VM1 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64

[    19.872] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=ce7c7672-912c-4f6c-aee6-8874f1a0c7ea ro quiet

[    19.873] Build Date: 14 October 2017  10:41:31AM

[    19.873] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support) 

[    19.873] Current version of pixman: 0.32.6

[    19.873]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    19.873] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    19.873] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr  3 20:26:42 2018

[    19.921] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    20.123] (==) No Layout section.  Using the first Screen section.

[    20.123] (==) No screen section available. Using defaults.

[    20.123] (**) |-->Screen "Default Screen Section" (0)

[    20.123] (**) |   |-->Monitor "<default monitor>"

[    20.143] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    20.143] (==) Automatically adding devices

[    20.143] (==) Automatically enabling devices

[    20.143] (==) Automatically adding GPU devices

[    20.179] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    20.179]  Entry deleted from font path.

[    20.179] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.

[    20.179]  Entry deleted from font path.

[    20.179] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.

[    20.179]  Entry deleted from font path.

[    20.179] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.

[    20.179]  Entry deleted from font path.

[    20.179] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.

[    20.179]  Entry deleted from font path.

[    20.179] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.

[    20.179]  Entry deleted from font path.

[    20.179] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  built-ins

[    20.179] (==) ModulePath set to "/usr/lib/xorg/modules"

[    20.179] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    20.195] (II) Loader magic: 0x5638d8574d80

[    20.195] (II) Module ABI versions:

[    20.195]  X.Org ANSI C Emulation: 0.4

[    20.195]  X.Org Video Driver: 18.0

[    20.195]  X.Org XInput driver : 21.0

[    20.195]  X.Org Server Extension : 8.0

[    20.196] (II) xfree86: Adding drm device (/dev/dri/card0)

[    20.198] (--) PCI:*(0:0:2:0) 8086:29c2:1043:8276 rev 2, Mem @ 0xfe900000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000bc00/8

[    20.198] (--) PCI: (0:0:2:1) 8086:29c3:1043:8276 rev 2, Mem @ 0xfe980000/524288

[    20.198] (II) LoadModule: "glx"

[    20.214] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    20.487] (II) Module glx: vendor="X.Org Foundation"

[    20.487]  compiled for 1.16.4, module version = 1.0.0

[    20.487]  ABI class: X.Org Server Extension, version 8.0

[    20.487] (==) AIGLX enabled

[    20.487] (==) Matched intel as autoconfigured driver 0

[    20.487] (==) Matched intel as autoconfigured driver 1

[    20.487] (==) Matched modesetting as autoconfigured driver 2

[    20.487] (==) Matched fbdev as autoconfigured driver 3

[    20.487] (==) Matched vesa as autoconfigured driver 4

[    20.487] (==) Assigned the driver to the xf86ConfigLayout

[    20.487] (II) LoadModule: "intel"

[    20.488] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so

[    20.536] (II) Module intel: vendor="X.Org Foundation"

[    20.536]  compiled for 1.15.99.904, module version = 2.21.15

[    20.536]  Module class: X.Org Video Driver

[    20.536]  ABI class: X.Org Video Driver, version 18.0

[    20.536] (II) LoadModule: "modesetting"

[    20.536] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    20.553] (II) Module modesetting: vendor="X.Org Foundation"

[    20.553]  compiled for 1.16.4, module version = 0.9.0

[    20.553]  Module class: X.Org Video Driver

[    20.553]  ABI class: X.Org Video Driver, version 18.0

[    20.553] (II) LoadModule: "fbdev"

[    20.554] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    20.556] (II) Module fbdev: vendor="X.Org Foundation"

[    20.556]  compiled for 1.15.99.904, module version = 0.4.4

[    20.556]  Module class: X.Org Video Driver

[    20.556]  ABI class: X.Org Video Driver, version 18.0

[    20.556] (II) LoadModule: "vesa"

[    20.556] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    20.564] (II) Module vesa: vendor="X.Org Foundation"

[    20.564]  compiled for 1.15.99.904, module version = 2.3.3

[    20.564]  Module class: X.Org Video Driver

[    20.564]  ABI class: X.Org Video Driver, version 18.0

[    20.564] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:

  i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,

  915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,

  Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,

  GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,

  HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,

  HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,

  HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,

  HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200

[    20.579] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    20.579] (II) FBDEV: driver for framebuffer: fbdev

[    20.579] (II) VESA: driver for VESA chipsets: vesa

[    20.579] (++) using VT number 7

[    20.593] (WW) Falling back to old probe method for modesetting

[    20.593] (WW) Falling back to old probe method for fbdev

[    20.593] (II) Loading sub module "fbdevhw"

[    20.593] (II) LoadModule: "fbdevhw"

[    20.612] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    20.622] (II) Module fbdevhw: vendor="X.Org Foundation"

[    20.622]  compiled for 1.16.4, module version = 0.0.2

[    20.622]  ABI class: X.Org Video Driver, version 18.0

[    20.622] (WW) Falling back to old probe method for vesa

[    20.622] (II) intel(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    20.622] (==) intel(0): Depth 24, (--) framebuffer bpp 32

[    20.622] (==) intel(0): RGB weight 888

[    20.622] (==) intel(0): Default visual is TrueColor

[    20.622] (--) intel(0): Integrated Graphics Chipset: Intel(R) G33

[    20.622] (**) intel(0): Relaxed fencing enabled

[    20.622] (**) intel(0): Wait on SwapBuffers? enabled

[    20.622] (**) intel(0): Triple buffering? enabled

[    20.622] (**) intel(0): Framebuffer tiled

[    20.622] (**) intel(0): Pixmaps tiled

[    20.622] (**) intel(0): 3D buffers tiled

[    20.622] (**) intel(0): SwapBuffers wait enabled

[    20.623] (==) intel(0): video overlay key set to 0x101fe

[    20.660] (II) intel(0): Output VGA1 has no monitor section

[    20.727] (II) intel(0): Output VGA2 has no monitor section

[    20.764] (II) intel(0): EDID for output VGA1

[    20.831] (II) intel(0): EDID for output VGA2

[    20.831] (II) intel(0): Manufacturer: ACR  Model: 1e  Serial#: 2500875339

[    20.831] (II) intel(0): Year: 2009  Week: 51

[    20.831] (II) intel(0): EDID Version: 1.3

[    20.831] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V

[    20.831] (II) intel(0): Sync:  Separate

[    20.831] (II) intel(0): Max Image Size [cm]: horiz.: 40  vert.: 25

[    20.831] (II) intel(0): Gamma: 2.07

[    20.831] (II) intel(0): DPMS capabilities: Off; RGB/Color Display

[    20.831] (II) intel(0): First detailed timing is preferred mode

[    20.831] (II) intel(0): redX: 0.634 redY: 0.354   greenX: 0.286 greenY: 0.620

[    20.831] (II) intel(0): blueX: 0.138 blueY: 0.076   whiteX: 0.312 whiteY: 0.328

[    20.832] (II) intel(0): Supported established timings:

[    20.832] (II) intel(0): 720x400@70Hz

[    20.832] (II) intel(0): 640x480@60Hz

[    20.832] (II) intel(0): 640x480@67Hz

[    20.832] (II) intel(0): 640x480@72Hz

[    20.832] (II) intel(0): 640x480@75Hz

[    20.832] (II) intel(0): 800x600@56Hz

[    20.832] (II) intel(0): 800x600@60Hz

[    20.832] (II) intel(0): 800x600@72Hz

[    20.832] (II) intel(0): 800x600@75Hz

[    20.832] (II) intel(0): 832x624@75Hz

[    20.832] (II) intel(0): 1024x768@60Hz

[    20.832] (II) intel(0): 1024x768@70Hz

[    20.832] (II) intel(0): 1024x768@75Hz

[    20.832] (II) intel(0): 1280x1024@75Hz

[    20.832] (II) intel(0): Manufacturer's mask: 0

[    20.832] (II) intel(0): Supported standard timings:

[    20.832] (II) intel(0): #0: hsize: 1280  vsize 1024  refresh: 75  vid: 36737

[    20.832] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897

[    20.832] (II) intel(0): #2: hsize: 1440  vsize 900  refresh: 75  vid: 3989

[    20.832] (II) intel(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149

[    20.832] (II) intel(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129

[    20.832] (II) intel(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337

[    20.832] (II) intel(0): Supported detailed timing:

[    20.832] (II) intel(0): clock: 106.5 MHz   Image Size:  408 x 255 mm

[    20.832] (II) intel(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0

[    20.832] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0

[    20.832] (II) intel(0): Serial No: LBT080444214

[    20.832] (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz

[    20.832] (II) intel(0): Monitor name: Acer B193W

[    20.832] (II) intel(0): EDID (in hex):

[    20.832] (II) intel(0):   00ffffffffffff0004721e004b541095

[    20.832] (II) intel(0):   331301036828196b2a6760a25a499e23

[    20.832] (II) intel(0):   135054bfef00818f8180950f95008100

[    20.832] (II) intel(0):   714f010101019a29a0d0518422305098

[    20.832] (II) intel(0):   360098ff1000001c000000ff004c4254

[    20.832] (II) intel(0):   3038303434343231340a000000fd0037

[    20.832] (II) intel(0):   4b1e530e000a202020202020000000fc

[    20.832] (II) intel(0):   00416365722042313933570a20200015

[    20.832] (II) intel(0): Printing probed modes for output VGA2

[    20.832] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    20.832] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    20.832] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    20.832] (II) intel(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    20.832] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)

[    20.832] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    20.832] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)

[    20.832] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    20.832] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    20.832] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    20.832] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    20.832] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    20.832] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    20.832] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    20.832] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    20.832] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)

[    20.832] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    20.832] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    20.832] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    20.832] (II) intel(0): Output VGA1 disconnected

[    20.832] (II) intel(0): Output VGA2 connected

[    20.832] (II) intel(0): Using exact sizes for initial modes

[    20.832] (II) intel(0): Output VGA2 using initial mode 1440x900

[    20.832] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

[    20.832] (II) intel(0): Kernel page flipping support detected, enabling

[    20.832] (==) intel(0): DPI set to (96, 96)

[    20.832] (II) Loading sub module "fb"

[    20.832] (II) LoadModule: "fb"

[    20.833] (II) Loading /usr/lib/xorg/modules/libfb.so

[    20.863] (II) Module fb: vendor="X.Org Foundation"

[    20.863]  compiled for 1.16.4, module version = 1.0.0

[    20.863]  ABI class: X.Org ANSI C Emulation, version 0.4

[    20.863] (II) Loading sub module "dri2"

[    20.863] (II) LoadModule: "dri2"

[    20.863] (II) Module "dri2" already built-in

[    20.863] (II) UnloadModule: "modesetting"

[    20.863] (II) Unloading modesetting

[    20.863] (II) UnloadModule: "fbdev"

[    20.863] (II) Unloading fbdev

[    20.864] (II) UnloadSubModule: "fbdevhw"

[    20.864] (II) Unloading fbdevhw

[    20.864] (II) UnloadModule: "vesa"

[    20.864] (II) Unloading vesa

[    20.864] (==) Depth 24 pixmap format is 32 bpp

[    20.914] (II) intel(0): [DRI2] Setup complete

[    20.914] (II) intel(0): [DRI2]   DRI driver: i915

[    20.914] (II) intel(0): Allocated new frame buffer 1472x900 stride 8192, tiled

[    20.923] (II) UXA(0): Driver registered support for the following operations:

[    20.923] (II)         solid

[    20.923] (II)         copy

[    20.923] (II)         composite (RENDER acceleration)

[    20.923] (II)         put_image

[    20.923] (II)         get_image

[    20.923] (==) intel(0): Backing store enabled

[    20.923] (==) intel(0): Silken mouse enabled

[    20.924] (II) intel(0): Initializing HW Cursor

[    20.924] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    20.930] (==) intel(0): DPMS enabled

[    20.930] (==) intel(0): Intel XvMC decoder disabled

[    20.930] (II) intel(0): Set up textured video

[    20.930] (II) intel(0): Set up overlay video

[    20.930] (II) intel(0): direct rendering: DRI2 Enabled

[    20.930] (==) intel(0): hotplug detection: "enabled"

[    20.968] (--) RandR disabled

[    20.997] (II) SELinux: Disabled on system

[    21.319] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[    21.319] (II) AIGLX: enabled GLX_ARB_create_context

[    21.319] (II) AIGLX: enabled GLX_ARB_create_context_profile

[    21.319] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile

[    21.319] (II) AIGLX: enabled GLX_INTEL_swap_event

[    21.319] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control

[    21.319] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[    21.319] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[    21.319] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[    21.319] (II) AIGLX: Loaded and initialized i915

[    21.319] (II) GLX: Initialized DRI2 GL provider for screen 0

[    21.319] (II) intel(0): Setting screen physical size to 381 x 238

on remarque pas de référence a un noyau 4.9 , pas de DRI3 , pas de carte virtuelle
par contre ceci est normal

[    20.198] (--) PCI:*(0:0:2:0) 8086:29c2:1043:8276 rev 2, Mem @ 0xfe900000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000bc00/8

[    20.198] (--) PCI: (0:0:2:1) 8086:29c3:1043:8276 rev 2, Mem @ 0xfe980000/524288

il reste la question , KMS fonctionne t'il ? (modesetting )

Dernière modification par anonyme (03-04-2018 19:52:09)

anonyme · 03-04-2018 20:01:12

sans le paquet xserver-xorg-video-intel , pas de prise en charge DRI2 (3D)

X.Org X Server 1.16.4

Release Date: 2014-12-20

[    19.661] X Protocol Version 11, Revision 0

[    19.661] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[    19.661] Current Operating System: Linux P5K-VM1 3.16.0-5-amd64 #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08) x86_64

[    19.661] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=ce7c7672-912c-4f6c-aee6-8874f1a0c7ea ro quiet

[    19.661] Build Date: 14 October 2017  10:41:31AM

[    19.661] xorg-server 2:1.16.4-1+deb8u2 (http://www.debian.org/support) 

[    19.661] Current version of pixman: 0.32.6

[    19.661]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[    19.661] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[    19.661] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr  3 20:56:17 2018

[    19.709] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[    19.803] (==) No Layout section.  Using the first Screen section.

[    19.803] (==) No screen section available. Using defaults.

[    19.803] (**) |-->Screen "Default Screen Section" (0)

[    19.803] (**) |   |-->Monitor "<default monitor>"

[    19.931] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[    19.931] (==) Automatically adding devices

[    19.931] (==) Automatically enabling devices

[    19.932] (==) Automatically adding GPU devices

[    20.192] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[    20.192]  Entry deleted from font path.

[    20.192] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.

[    20.192]  Entry deleted from font path.

[    20.192] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.

[    20.192]  Entry deleted from font path.

[    20.192] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.

[    20.192]  Entry deleted from font path.

[    20.192] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.

[    20.192]  Entry deleted from font path.

[    20.192] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.

[    20.192]  Entry deleted from font path.

[    20.192] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  built-ins

[    20.192] (==) ModulePath set to "/usr/lib/xorg/modules"

[    20.192] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[    20.208] (II) Loader magic: 0x5558c0173d80

[    20.208] (II) Module ABI versions:

[    20.208]  X.Org ANSI C Emulation: 0.4

[    20.208]  X.Org Video Driver: 18.0

[    20.208]  X.Org XInput driver : 21.0

[    20.208]  X.Org Server Extension : 8.0

[    20.209] (II) xfree86: Adding drm device (/dev/dri/card0)

[    20.210] (--) PCI:*(0:0:2:0) 8086:29c2:1043:8276 rev 2, Mem @ 0xfe900000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000bc00/8

[    20.210] (--) PCI: (0:0:2:1) 8086:29c3:1043:8276 rev 2, Mem @ 0xfe980000/524288

[    20.211] (II) LoadModule: "glx"

[    20.226] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[    20.475] (II) Module glx: vendor="X.Org Foundation"

[    20.475]  compiled for 1.16.4, module version = 1.0.0

[    20.475]  ABI class: X.Org Server Extension, version 8.0

[    20.475] (==) AIGLX enabled

[    20.475] (==) Matched intel as autoconfigured driver 0

[    20.475] (==) Matched intel as autoconfigured driver 1

[    20.475] (==) Matched modesetting as autoconfigured driver 2

[    20.475] (==) Matched fbdev as autoconfigured driver 3

[    20.475] (==) Matched vesa as autoconfigured driver 4

[    20.475] (==) Assigned the driver to the xf86ConfigLayout

[    20.475] (II) LoadModule: "intel"

[    20.492] (WW) Warning, couldn't open module intel

[    20.492] (II) UnloadModule: "intel"

[    20.492] (II) Unloading intel

[    20.492] (EE) Failed to load module "intel" (module does not exist, 0)

[    20.492] (II) LoadModule: "modesetting"

[    20.492] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[    20.508] (II) Module modesetting: vendor="X.Org Foundation"

[    20.508]  compiled for 1.16.4, module version = 0.9.0

[    20.508]  Module class: X.Org Video Driver

[    20.508]  ABI class: X.Org Video Driver, version 18.0

[    20.508] (II) LoadModule: "fbdev"

[    20.508] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[    20.510] (II) Module fbdev: vendor="X.Org Foundation"

[    20.510]  compiled for 1.15.99.904, module version = 0.4.4

[    20.510]  Module class: X.Org Video Driver

[    20.510]  ABI class: X.Org Video Driver, version 18.0

[    20.510] (II) LoadModule: "vesa"

[    20.511] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[    20.518] (II) Module vesa: vendor="X.Org Foundation"

[    20.518]  compiled for 1.15.99.904, module version = 2.3.3

[    20.518]  Module class: X.Org Video Driver

[    20.518]  ABI class: X.Org Video Driver, version 18.0

[    20.518] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[    20.518] (II) FBDEV: driver for framebuffer: fbdev

[    20.518] (II) VESA: driver for VESA chipsets: vesa

[    20.518] (++) using VT number 7

[    20.523] (II) modesetting(0): using drv /dev/dri/card0

[    20.523] (WW) Falling back to old probe method for fbdev

[    20.523] (II) Loading sub module "fbdevhw"

[    20.523] (II) LoadModule: "fbdevhw"

[    20.523] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[    20.527] (II) Module fbdevhw: vendor="X.Org Foundation"

[    20.527]  compiled for 1.16.4, module version = 0.0.2

[    20.527]  ABI class: X.Org Video Driver, version 18.0

[    20.527] (WW) Falling back to old probe method for vesa

[    20.527] (II) modesetting(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[    20.527] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32

[    20.527] (==) modesetting(0): RGB weight 888

[    20.527] (==) modesetting(0): Default visual is TrueColor

[    20.527] (II) modesetting(0): ShadowFB: preferred YES, enabled YES

[    20.564] (II) modesetting(0): Output VGA-0 has no monitor section

[    20.631] (II) modesetting(0): Output VGA-1 has no monitor section

[    20.668] (II) modesetting(0): EDID for output VGA-0

[    20.735] (II) modesetting(0): EDID for output VGA-1

[    20.735] (II) modesetting(0): Manufacturer: ACR  Model: 1e  Serial#: 2500875339

[    20.735] (II) modesetting(0): Year: 2009  Week: 51

[    20.735] (II) modesetting(0): EDID Version: 1.3

[    20.735] (II) modesetting(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V

[    20.735] (II) modesetting(0): Sync:  Separate

[    20.735] (II) modesetting(0): Max Image Size [cm]: horiz.: 40  vert.: 25

[    20.735] (II) modesetting(0): Gamma: 2.07

[    20.735] (II) modesetting(0): DPMS capabilities: Off; RGB/Color Display

[    20.735] (II) modesetting(0): First detailed timing is preferred mode

[    20.735] (II) modesetting(0): redX: 0.634 redY: 0.354   greenX: 0.286 greenY: 0.620

[    20.735] (II) modesetting(0): blueX: 0.138 blueY: 0.076   whiteX: 0.312 whiteY: 0.328

[    20.736] (II) modesetting(0): Supported established timings:

[    20.736] (II) modesetting(0): 720x400@70Hz

[    20.736] (II) modesetting(0): 640x480@60Hz

[    20.736] (II) modesetting(0): 640x480@67Hz

[    20.736] (II) modesetting(0): 640x480@72Hz

[    20.736] (II) modesetting(0): 640x480@75Hz

[    20.736] (II) modesetting(0): 800x600@56Hz

[    20.736] (II) modesetting(0): 800x600@60Hz

[    20.736] (II) modesetting(0): 800x600@72Hz

[    20.736] (II) modesetting(0): 800x600@75Hz

[    20.736] (II) modesetting(0): 832x624@75Hz

[    20.736] (II) modesetting(0): 1024x768@60Hz

[    20.736] (II) modesetting(0): 1024x768@70Hz

[    20.736] (II) modesetting(0): 1024x768@75Hz

[    20.736] (II) modesetting(0): 1280x1024@75Hz

[    20.736] (II) modesetting(0): Manufacturer's mask: 0

[    20.736] (II) modesetting(0): Supported standard timings:

[    20.736] (II) modesetting(0): #0: hsize: 1280  vsize 1024  refresh: 75  vid: 36737

[    20.736] (II) modesetting(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897

[    20.736] (II) modesetting(0): #2: hsize: 1440  vsize 900  refresh: 75  vid: 3989

[    20.736] (II) modesetting(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149

[    20.736] (II) modesetting(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129

[    20.736] (II) modesetting(0): #5: hsize: 1152  vsize 864  refresh: 75  vid: 20337

[    20.736] (II) modesetting(0): Supported detailed timing:

[    20.736] (II) modesetting(0): clock: 106.5 MHz   Image Size:  408 x 255 mm

[    20.736] (II) modesetting(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0

[    20.736] (II) modesetting(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0

[    20.736] (II) modesetting(0): Serial No: LBT080444214

[    20.736] (II) modesetting(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz

[    20.736] (II) modesetting(0): Monitor name: Acer B193W

[    20.736] (II) modesetting(0): EDID (in hex):

[    20.736] (II) modesetting(0):   00ffffffffffff0004721e004b541095

[    20.736] (II) modesetting(0):   331301036828196b2a6760a25a499e23

[    20.736] (II) modesetting(0):   135054bfef00818f8180950f95008100

[    20.736] (II) modesetting(0):   714f010101019a29a0d0518422305098

[    20.736] (II) modesetting(0):   360098ff1000001c000000ff004c4254

[    20.736] (II) modesetting(0):   3038303434343231340a000000fd0037

[    20.736] (II) modesetting(0):   4b1e530e000a202020202020000000fc

[    20.736] (II) modesetting(0):   00416365722042313933570a20200015

[    20.736] (II) modesetting(0): Printing probed modes for output VGA-1

[    20.736] (II) modesetting(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz eP)

[    20.736] (II) modesetting(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[    20.736] (II) modesetting(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[    20.736] (II) modesetting(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)

[    20.736] (II) modesetting(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)

[    20.736] (II) modesetting(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[    20.736] (II) modesetting(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)

[    20.736] (II) modesetting(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[    20.736] (II) modesetting(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[    20.736] (II) modesetting(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[    20.736] (II) modesetting(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[    20.736] (II) modesetting(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[    20.736] (II) modesetting(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[    20.736] (II) modesetting(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[    20.736] (II) modesetting(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[    20.736] (II) modesetting(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)

[    20.736] (II) modesetting(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[    20.736] (II) modesetting(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[    20.736] (II) modesetting(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[    20.736] (II) modesetting(0): Output VGA-0 disconnected

[    20.736] (II) modesetting(0): Output VGA-1 connected

[    20.736] (II) modesetting(0): Using exact sizes for initial modes

[    20.736] (II) modesetting(0): Output VGA-1 using initial mode 1440x900

[    20.736] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.

[    20.736] (==) modesetting(0): DPI set to (96, 96)

[    20.736] (II) Loading sub module "fb"

[    20.736] (II) LoadModule: "fb"

[    20.737] (II) Loading /usr/lib/xorg/modules/libfb.so

[    20.743] (II) Module fb: vendor="X.Org Foundation"

[    20.743]  compiled for 1.16.4, module version = 1.0.0

[    20.743]  ABI class: X.Org ANSI C Emulation, version 0.4

[    20.743] (II) Loading sub module "shadow"

[    20.743] (II) LoadModule: "shadow"

[    20.743] (II) Loading /usr/lib/xorg/modules/libshadow.so

[    20.760] (II) Module shadow: vendor="X.Org Foundation"

[    20.760]  compiled for 1.16.4, module version = 1.1.0

[    20.760]  ABI class: X.Org ANSI C Emulation, version 0.4

[    20.760] (II) UnloadModule: "fbdev"

[    20.760] (II) Unloading fbdev

[    20.760] (II) UnloadSubModule: "fbdevhw"

[    20.760] (II) Unloading fbdevhw

[    20.760] (II) UnloadModule: "vesa"

[    20.760] (II) Unloading vesa

[    20.761] (==) Depth 24 pixmap format is 32 bpp

[    20.787] (==) modesetting(0): Backing store enabled

[    20.787] (==) modesetting(0): Silken mouse enabled

[    20.787] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[    20.793] (==) modesetting(0): DPMS enabled

[    20.820] (--) RandR disabled

[    20.836] (II) SELinux: Disabled on system

[    20.843] (II) AIGLX: Screen 0 is not DRI2 capable

[    20.843] (EE) AIGLX: reverting to software rendering

[    22.205] (II) AIGLX: Loaded and initialized swrast

[    22.205] (II) GLX: Initialized DRISWRAST GL provider for screen 0

[    22.206] (II) modesetting(0): Damage tracking initialized

[    22.206] (II) modesetting(0): Setting screen physical size to 381 x 238

l'erreur du noyau

journalctl -r -p err

 

retour

-- Logs begin at mar. 2018-04-03 20:56:05 CEST, end at mar. 2018-04-03 21:11:59 CEST. --

avril 03 20:57:00 P5K-VM1 pulseaudio[1127]: Daemon already running.

avril 03 20:57:00 P5K-VM1 pulseaudio[1125]: [pulseaudio] pid.c: Daemon already running.

avril 03 20:56:07 P5K-VM1 kernel: [drm:i915_irq_handler] *ERROR* pipe A underrun

avec le paquet "firmware-linux-nonfree" installé

journalctl -r -p err

-- Logs begin at mar. 2018-04-03 21:14:45 CEST, end at mar. 2018-04-03 21:15:50 CEST. --

avril 03 21:15:26 P5K-VM1 pulseaudio[1114]: [pulseaudio] pid.c: Daemon already running.

avril 03 21:15:26 P5K-VM1 pulseaudio[1112]: [pulseaudio] pid.c: Daemon already running.

mais pas mieux

    21.137] (II) AIGLX: Screen 0 is not DRI2 capable

[    21.137] (EE) AIGLX: reverting to software rendering

[    22.374] (II) AIGLX: Loaded and initialized swrast

[    22.374] (II) GLX: Initialized DRISWRAST GL provider for screen 0

[    22.375] (II) modesetting(0): Damage tracking initialized

[    22.375] (II) modesetting(0): Setting screen physical size to 381 x 238

après avoir remit le paquet xserver-xorg-video-intel et installé mesa-utils

glxgears

 

retour

Running synchronized to the vertical refresh.  The framerate should be

approximately the same as the monitor refresh rate.

frames in 5.0 seconds = 60.066 FPS

frames in 5.0 seconds = 60.057 FPS

frames in 5.0 seconds = 60.056 FPS

frames in 5.0 seconds = 60.056 FPS

frames in 5.0 seconds = 60.056 FPS

frames in 5.0 seconds = 60.056 FPS

frames in 5.0 seconds = 60.056 FPS

après avoir installé "mesa-utils-extra"

es2_info

 

retour

EGL_VERSION: 1.4 (DRI2)

EGL_VENDOR: Mesa Project

EGL_EXTENSIONS:

    EGL_MESA_drm_image, EGL_MESA_configless_context, 

    EGL_WL_bind_wayland_display, EGL_KHR_image_base, EGL_KHR_image_pixmap, 

    EGL_KHR_image, EGL_KHR_gl_texture_2D_image, 

    EGL_KHR_gl_texture_cubemap_image, EGL_KHR_gl_renderbuffer_image, 

    EGL_KHR_surfaceless_context, EGL_KHR_create_context, EGL_NOK_swap_region, 

    EGL_NOK_texture_from_pixmap, EGL_CHROMIUM_sync_control, 

    EGL_NV_post_sub_buffer

EGL_CLIENT_APIS: OpenGL OpenGL_ES OpenGL_ES2 

GL_VERSION: OpenGL ES 2.0 Mesa 10.3.2

GL_RENDERER: Mesa DRI Intel(R) G33 

GL_EXTENSIONS:

    GL_EXT_blend_minmax, GL_EXT_multi_draw_arrays, 

    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_compression_dxt1, 

    GL_EXT_texture_format_BGRA8888, GL_OES_depth24, GL_OES_element_index_uint, 

    GL_OES_fbo_render_mipmap, GL_OES_mapbuffer, GL_OES_rgb8_rgba8, 

    GL_OES_stencil8, GL_OES_texture_3D, GL_OES_texture_npot, 

    GL_OES_EGL_image, GL_OES_depth_texture, GL_OES_packed_depth_stencil, 

    GL_EXT_texture_type_2_10_10_10_REV, GL_OES_get_program_binary, 

    GL_APPLE_texture_max_level, GL_EXT_discard_framebuffer, 

    GL_EXT_read_format_bgra, GL_NV_fbo_color_attachments, 

    GL_OES_vertex_array_object, GL_ANGLE_texture_compression_dxt3, 

    GL_ANGLE_texture_compression_dxt5, GL_EXT_unpack_subimage, 

    GL_NV_draw_buffers, GL_NV_read_buffer, GL_EXT_map_buffer_range, 

    GL_OES_surfaceless_context, GL_EXT_separate_shader_objects

voila j'espère qui répond a ta question , sur une installation de jessie tu n'a besoin de rien de plus avec le gpu G33 (intel) du chipset de ta carte mère
avec stretch je pense que modesetting risque de mieux fonctionner , mais avec ce matériel (ancien) autant utiliser le paquet "intel"

Dernière modification par anonyme (03-04-2018 20:37:10)

anonyme · 04-04-2018 02:30:41

je cherche a faire fonctionner cette carte PCI ASUS WIFI de 2004 qui ne fonctionne pas avec win10 (plus de driver)
a priori elle est reconnu par le noyau et prise en charge

01.0 Network controller: Ralink corp. RT2500 Wireless 802.11bg (rev 01)

 

mais de façon aléatoire j'ai toujours ceci pour le noyau (mais sans incidence sur le fonctionnement de la vidéo )

avril 04 03:20:32 P5K-VM1 kernel: [drm:i915_irq_handler] *ERROR* pipe A underrun

 

il faudra que je cherche sur le net

quelques informations supplémentaire trouvé dans /var/log/syslog (j'ai installé le paquet intel-microcode et supprimé les firmwares pour le gpu et le wifi (inutile pris en charge par le noyau ) )

Apr  4 04:39:52 P5K-VM1 kernel: [    0.000000] CPU0 microcode updated early to revision 0xba, date = 2010-10-03

Apr  4 04:39:52 P5K-VM1 kernel: [    0.000000] Initializing cgroup subsys cpuset

Apr  4 04:39:52 P5K-VM1 kernel: [    0.000000] Initializing cgroup subsys cpu

Apr  4 04:39:52 P5K-VM1 kernel: [    0.000000] Initializing cgroup subsys cpuacct

Apr  4 04:39:52 P5K-VM1 kernel: [    0.000000] Linux version 3.16.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.51-3+deb8u1$

Apr  4 04:39:52 P5K-VM1 kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=ce7c7672-912c-4f6c-aee6-8874f1a0c7ea ro quiet

Apr  4 04:39:52 P5K-VM1 kernel: [    0.073116] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (fam: 06, model: 0f, stepping: 0b)

Apr  4 04:39:52 P5K-VM1 kernel: [    0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.

Apr  4 04:39:52 P5K-VM1 kernel: [    0.495374] Linux agpgart interface v0.103

Apr  4 04:39:52 P5K-VM1 kernel: [    0.495454] agpgart-intel 0000:00:00.0: Intel G33 Chipset

Apr  4 04:39:52 P5K-VM1 kernel: [    0.495471] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable

Apr  4 04:39:52 P5K-VM1 kernel: [    0.496674] agpgart-intel 0000:00:00.0: detected 8192K stolen memory

Apr  4 04:39:52 P5K-VM1 kernel: [    0.496810] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000

Apr  4 04:39:52 P5K-VM1 kernel: [   10.665063] [drm] Memory usable by graphics device = 512M

Apr  4 04:39:52 P5K-VM1 kernel: [   10.665067] [drm] Replacing VGA console driver

Apr  4 04:39:52 P5K-VM1 kernel: [   10.665554] Console: switching to colour dummy device 80x25

Apr  4 04:39:52 P5K-VM1 kernel: [   10.688041] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

Apr  4 04:39:52 P5K-VM1 kernel: [   10.688044] [drm] Driver supports precise vblank timestamp query.

Apr  4 04:39:52 P5K-VM1 kernel: [   10.688100] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

Apr  4 04:39:52 P5K-VM1 kernel: [   10.743485] ppdev: user-space parallel port driver

Apr  4 04:39:52 P5K-VM1 kernel: [   10.826734] cfg80211: Calling CRDA to update world regulatory domain

Apr  4 04:39:52 P5K-VM1 kernel: [   10.839526] [drm] initialized overlay support

Apr  4 04:39:52 P5K-VM1 kernel: [   10.928707] fbcon: inteldrmfb (fb0) is primary device

Apr  4 04:39:52 P5K-VM1 kernel: [   10.947749] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2560, rf: 0003, rev: 0004

Apr  4 04:39:52 P5K-VM1 kernel: [   10.965151] [drm] Setting output timings on SDVOB failed

Apr  4 04:39:52 P5K-VM1 kernel: [   10.981236] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

Apr  4 04:39:52 P5K-VM1 kernel: [   11.060533] Console: switching to colour frame buffer device 180x56

Apr  4 04:39:52 P5K-VM1 kernel: [   11.064179] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device

Apr  4 04:39:52 P5K-VM1 kernel: [   11.064181] i915 0000:00:02.0: registered panic notifier

Apr  4 04:39:52 P5K-VM1 kernel: [   11.086811] i915: No ACPI video bus found

Apr  4 04:39:52 P5K-VM1 kernel: [   11.086876] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

Dernière modification par anonyme (04-04-2018 04:03:27)

anonyme · 04-04-2018 08:28:45

j'ai fait quelques recherches sur ton chipset Intel NM10/ICH7
une carte mère avec ce circuit et un G31 pour la vidéo => https://www.asus.com/fr/Motherboards/P5KPLVM/
et pour ceci => "kernel: [drm:i915_irq_handler] *ERROR* pipe A underrun" sur un moteur de recherche donne beaucoup de résultats , meme pour du matériel intel plus récent .
pas trouvé de solution miracle , mais tu ne parle pas de ce souci.

Ma machine est stable et l'écran bien géré sous jessie .
ps: les deux chipsets ont tendance a chauffer (le bus monte jusqu'a 1333Mhz avec certain cpu , c'est limite de l'overclocking )

un petit retour en arrière avec jessie

Debian-facile

#1 02-04-2018 14:42:51

Carte graphique 82G33/G31 : où est le bon paquet ?

#2 02-04-2018 16:18:42

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#3 02-04-2018 16:43:25

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#4 02-04-2018 18:34:04

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#5 02-04-2018 19:04:43

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#6 02-04-2018 20:05:52

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#7 02-04-2018 20:29:51

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#8 02-04-2018 21:10:42

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#9 02-04-2018 22:15:09

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#10 02-04-2018 23:12:42

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#11 03-04-2018 00:48:20

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#12 03-04-2018 19:09:15

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#13 03-04-2018 20:01:12

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#14 04-04-2018 02:30:41

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

#15 04-04-2018 08:28:45

Re : Carte graphique 82G33/G31 : où est le bon paquet ?

Pied de page des forums