[Résolu] Prob affichage ecran changè

tuxis · 12-05-2018 11:09:51

Bonjour,

J'ai changer d’écran 17" et suis passer à sigmacom co ltd 42"
le meilleur affichage proposer est : 1360x768 60hz (ou 1280x1024)
mais l’écran conseil : 1280x768 55hz (ce qui économiserait écran et carte vidéo)

comment lui faire accepter le 1280x768 55Hz ?

Merci pour votre aide

Dernière modification par tuxis (27-05-2018 01:08:16)

raleur · 13-05-2018 10:51:56

Ces résolutions me semblent bien basses pour un écran de cette taille. Il ne supporte pas au moins le full HD 1920*1080 ?
1280x1024 a un rapport d'aspect 5/4 qui n'est pas du tout adapté aux écrans larges de type 16/9.
Qu'affiche xrandr ?
Quel est le modèle de processeur graphique ? Si AMD/ATI, est-ce que le paquet firmware-amd-graphics ou firmware-linux-nonfree est bien installé ?

tuxis · 19-05-2018 15:08:29

à gauche de l’écran lorsque j’appris sur menu qu’apparaît 1280x768/55Hz
c'est DFlinux qui la trouver le driver.
proce : AMD athlon 64x2 dual core 4600+
Vidéo : ATi RV370ATi RV370

xrandr :
Screen 0: minimum 320 x 200, current 1360 x 768, maximum 4096 x 4096
VGA-0 connected primary 1360x768+0+0 (normal left inverted right x axis y axis) 920mm x 518mm
1360x768 60.00*+
1280x1024 60.02
1152x864 75.00
1024x768 75.03 70.07 60.00
832x624 74.55
800x600 72.19 75.00 60.32 56.25
640x480 75.00 72.81 66.67 59.94
720x400 70.08
DVI-0 disconnected (normal left inverted right x axis y axis)
S-video disconnected (normal left inverted right x axis y axis)

anonyme · 19-05-2018 18:17:06

Bonjour
cet écran c'est un TFT 42 pouces , ou un téléviseur TFT 42 pouces ?
norme HD , FullHD ou plus ancien

la carte ATI est ancienne (2004 environ) , en PCIe ? avec 64 Mo de mémoire DDR3

nota : elle a encore une sortie analogique "din" pour la télévision. plus un VGA et DVI

donne le retour de la commande glxinfo -B (tu installe le paquet mesa-utils avant si la commande ne fonctionne pas )

glxinfo -B

 

je suppose que DFLinux c'est une debian stretch amd64

Dernière modification par anonyme (19-05-2018 18:17:49)

tuxis · 22-05-2018 18:52:53

c'est une Tv trouver et réparer.

tuxis@Tuxlinux:~$ glxinfo -B

name of display: :0.0

display: :0  screen: 0

direct rendering: Yes

Extended renderer info (GLX_MESA_query_renderer):

    Vendor: X.Org R300 Project (0x1002)

    Device: ATI RV370 (0x5b62)

    Version: 13.0.6

    Accelerated: yes

    Video memory: 128MB

    Unified memory: no

    Preferred profile: compat (0x2)

    Max core profile version: 0.0

    Max compat profile version: 2.1

    Max GLES1 profile version: 1.1

    Max GLES[23] profile version: 2.0

OpenGL vendor string: X.Org R300 Project

OpenGL renderer string: Gallium 0.4 on ATI RV370

OpenGL version string: 2.1 Mesa 13.0.6

OpenGL shading language version string: 1.20

OpenGL ES profile version string: OpenGL ES 2.0 Mesa 13.0.6

OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16

tuxis@Tuxlinux:~$

vu le poids c'est une ancienne

Dernière modification par tuxis (22-05-2018 19:00:36)

èfpé · 22-05-2018 20:24:42

Bonsoir,

Il serait possible de creuser un peu en décodant les données EDID (read-edid et/ou edid-decode), par exemple :

ls -l /sys/class/drm/*/edid

-r--r--r-- 1 root root 0 mai   22 21:00 /sys/class/drm/card0-DVI-I-1/edid

-r--r--r-- 1 root root 0 mai   22 21:00 /sys/class/drm/card0-HDMI-A-1/edid

-r--r--r-- 1 root root 0 mai   22 21:00 /sys/class/drm/card0-VGA-1/edid

edid-decode /sys/class/drm/card0-VGA-1/edid

xrandr --verbose

et/ou

cat /var/log/Xorg.0.log

on peut aussi se demander : pourquoi forcer la définition 1280×768 (15:9) sur un moniteur 16:9 ?

Dernière modification par èfpé (22-05-2018 22:24:42)

tuxis · 22-05-2018 23:21:50

tuxis@Tuxlinux:~$ ls -l /sys/class/drm/*/edid

-r--r--r-- 1 root root 0 mai   23 00:17 /sys/class/drm/card0-DVI-I-1/edid

-r--r--r-- 1 root root 0 mai   23 00:17 /sys/class/drm/card0-SVIDEO-1/edid

-r--r--r-- 1 root root 0 mai   22 16:52 /sys/class/drm/card0-VGA-1/edid

tuxis@Tuxlinux:~$

tuxis@Tuxlinux:~$ edid-decode /sys/class/drm/card0-VGA-1/edid

The program 'edid-decode' is currently not installed.  To run 'edid-decode' please ask your administrator to install the package 'edid-decode'

edid-decode: command not found

tuxis@Tuxlinux:~$

tuxis@Tuxlinux:~$ xrandr --verbose

Screen 0: minimum 320 x 200, current 1360 x 768, maximum 4096 x 4096

VGA-0 connected primary 1360x768+0+0 (0x55) normal (normal left inverted right x axis y axis) 920mm x 518mm

  Identifier: 0x51

  Timestamp:  26096761

  Subpixel:   no subpixels

  Gamma:      1.0:1.0:1.0

  Brightness: 1.0

  Clones:     DVI-0

  CRTC:       0

  CRTCs:      0 1

  Transform:  1.000000 0.000000 0.000000

              0.000000 1.000000 0.000000

              0.000000 0.000000 1.000000

             filter: 

  EDID: 

    00ffffffffffff004c6c000000000000

    000f01030f00008c0a6f8ba25a4d9424

    1a5156bfef8081806140454031400101

    010101010101172150a051001b303070

    130098063200001e302a009851002a40

    30701300520e11000018000000fd0038

    551e400b000a202020202020000000fc

    005369676d6120446973702e0a20000c

  load detection: 1 

    range: (0, 1)

  1360x768 (0x55) 84.710MHz +HSync +VSync *current +preferred

        h: width  1360 start 1408 end 1520 total 1776 skew    0 clock  47.70KHz

        v: height  768 start  769 end  772 total  795           clock  60.00Hz

  1280x1024 (0x56) 108.000MHz -HSync -VSync

        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz

        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz

  1152x864 (0x57) 108.000MHz +HSync +VSync

        h: width  1152 start 1216 end 1344 total 1600 skew    0 clock  67.50KHz

        v: height  864 start  865 end  868 total  900           clock  75.00Hz

  1024x768 (0x58) 78.750MHz +HSync +VSync

        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock  60.02KHz

        v: height  768 start  769 end  772 total  800           clock  75.03Hz

  1024x768 (0x59) 75.000MHz -HSync -VSync

        h: width  1024 start 1048 end 1184 total 1328 skew    0 clock  56.48KHz

        v: height  768 start  771 end  777 total  806           clock  70.07Hz

  1024x768 (0x5a) 65.000MHz -HSync -VSync

        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz

        v: height  768 start  771 end  777 total  806           clock  60.00Hz

  832x624 (0x5b) 57.284MHz -HSync -VSync

        h: width   832 start  864 end  928 total 1152 skew    0 clock  49.73KHz

        v: height  624 start  625 end  628 total  667           clock  74.55Hz

  800x600 (0x5c) 50.000MHz +HSync +VSync

        h: width   800 start  856 end  976 total 1040 skew    0 clock  48.08KHz

        v: height  600 start  637 end  643 total  666           clock  72.19Hz

  800x600 (0x5d) 49.500MHz +HSync +VSync

        h: width   800 start  816 end  896 total 1056 skew    0 clock  46.88KHz

        v: height  600 start  601 end  604 total  625           clock  75.00Hz

  800x600 (0x5e) 40.000MHz +HSync +VSync

        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz

        v: height  600 start  601 end  605 total  628           clock  60.32Hz

  800x600 (0x5f) 36.000MHz +HSync +VSync

        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz

        v: height  600 start  601 end  603 total  625           clock  56.25Hz

  640x480 (0x60) 31.500MHz -HSync -VSync

        h: width   640 start  656 end  720 total  840 skew    0 clock  37.50KHz

        v: height  480 start  481 end  484 total  500           clock  75.00Hz

  640x480 (0x61) 31.500MHz -HSync -VSync

        h: width   640 start  664 end  704 total  832 skew    0 clock  37.86KHz

        v: height  480 start  489 end  492 total  520           clock  72.81Hz

  640x480 (0x62) 30.240MHz -HSync -VSync

        h: width   640 start  704 end  768 total  864 skew    0 clock  35.00KHz

        v: height  480 start  483 end  486 total  525           clock  66.67Hz

  640x480 (0x63) 25.175MHz -HSync -VSync

        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz

        v: height  480 start  490 end  492 total  525           clock  59.94Hz

  720x400 (0x64) 28.320MHz -HSync +VSync

        h: width   720 start  738 end  846 total  900 skew    0 clock  31.47KHz

        v: height  400 start  412 end  414 total  449           clock  70.08Hz

DVI-0 disconnected (normal left inverted right x axis y axis)

  Identifier: 0x52

  Timestamp:  26096761

  Subpixel:   horizontal rgb

  Clones:     VGA-0

  CRTCs:      0 1

  Transform:  1.000000 0.000000 0.000000

              0.000000 1.000000 0.000000

              0.000000 0.000000 1.000000

             filter: 

  load detection: 1 

    range: (0, 1)

S-video disconnected (normal left inverted right x axis y axis)

  Identifier: 0x53

  Timestamp:  26096761

  Subpixel:   no subpixels

  Clones:    

  CRTCs:      0 1

  Transform:  1.000000 0.000000 0.000000

              0.000000 1.000000 0.000000

              0.000000 0.000000 1.000000

             filter: 

  tv standard: ntsc 

    supported: ntsc, pal, pal-m, pal-60, ntsc-j, scart-pal, pal-cn, secam

  load detection: 1 

    range: (0, 1)

tuxis@Tuxlinux:~$

tuxis · 22-05-2018 23:23:05

tuxis@Tuxlinux:~$ cat /var/log/Xorg.0.log

[ 26096.800] 

X.Org X Server 1.19.2

Release Date: 2017-03-02

[ 26096.800] X Protocol Version 11, Revision 0

[ 26096.800] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian

[ 26096.800] Current Operating System: Linux Tuxlinux 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) x86_64

[ 26096.800] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-6-amd64 root=UUID=ddb16f6c-eb4e-49cb-89fd-fd7a77e268d6 ro quiet

[ 26096.800] Build Date: 16 October 2017  08:19:45AM

[ 26096.800] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) 

[ 26096.800] Current version of pixman: 0.34.0

[ 26096.800]  Before reporting problems, check http://wiki.x.org

  to make sure that you have the latest version.

[ 26096.800] Markers: (--) probed, (**) from config file, (==) default setting,

  (++) from command line, (!!) notice, (II) informational,

  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

[ 26096.800] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 23 00:07:00 2018

[ 26096.801] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

[ 26096.855] (==) No Layout section.  Using the first Screen section.

[ 26096.855] (==) No screen section available. Using defaults.

[ 26096.855] (**) |-->Screen "Default Screen Section" (0)

[ 26096.855] (**) |   |-->Monitor "<default monitor>"

[ 26096.856] (==) No monitor specified for screen "Default Screen Section".

  Using a default monitor configuration.

[ 26096.856] (==) Automatically adding devices

[ 26096.856] (==) Automatically enabling devices

[ 26096.856] (==) Automatically adding GPU devices

[ 26096.856] (==) Max clients allowed: 256, resource mask: 0x1fffff

[ 26096.856] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.

[ 26096.856]  Entry deleted from font path.

[ 26096.856] (==) FontPath set to:

  /usr/share/fonts/X11/misc,

  /usr/share/fonts/X11/100dpi/:unscaled,

  /usr/share/fonts/X11/75dpi/:unscaled,

  /usr/share/fonts/X11/Type1,

  /usr/share/fonts/X11/100dpi,

  /usr/share/fonts/X11/75dpi,

  built-ins

[ 26096.856] (==) ModulePath set to "/usr/lib/xorg/modules"

[ 26096.856] (II) The server relies on udev to provide the list of input devices.

  If no devices become available, reconfigure udev or disable AutoAddDevices.

[ 26096.856] (II) Loader magic: 0x55aa02903e00

[ 26096.856] (II) Module ABI versions:

[ 26096.856]  X.Org ANSI C Emulation: 0.4

[ 26096.857]  X.Org Video Driver: 23.0

[ 26096.857]  X.Org XInput driver : 24.1

[ 26096.857]  X.Org Server Extension : 10.0

[ 26096.859] (++) using VT number 7

[ 26096.859] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration

[ 26096.860] (II) xfree86: Adding drm device (/dev/dri/card0)

[ 26096.863] (--) PCI:*(0:2:0:0) 1002:5b62:1002:0602 rev 0, Mem @ 0xe8000000/134217728, 0xfdef0000/65536, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072

[ 26096.863] (--) PCI: (0:2:0:1) 1002:5b72:1002:0603 rev 0, Mem @ 0xfdee0000/65536

[ 26096.863] (II) LoadModule: "glx"

[ 26096.864] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so

[ 26096.881] (II) Module glx: vendor="X.Org Foundation"

[ 26096.881]  compiled for 1.19.2, module version = 1.0.0

[ 26096.881]  ABI class: X.Org Server Extension, version 10.0

[ 26096.881] (==) Matched ati as autoconfigured driver 0

[ 26096.881] (==) Matched ati as autoconfigured driver 1

[ 26096.881] (==) Matched modesetting as autoconfigured driver 2

[ 26096.881] (==) Matched fbdev as autoconfigured driver 3

[ 26096.881] (==) Matched vesa as autoconfigured driver 4

[ 26096.881] (==) Assigned the driver to the xf86ConfigLayout

[ 26096.881] (II) LoadModule: "ati"

[ 26096.881] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so

[ 26096.890] (II) Module ati: vendor="X.Org Foundation"

[ 26096.890]  compiled for 1.19.0, module version = 7.8.0

[ 26096.890]  Module class: X.Org Video Driver

[ 26096.890]  ABI class: X.Org Video Driver, version 23.0

[ 26096.891] (II) LoadModule: "radeon"

[ 26096.891] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so

[ 26096.898] (II) Module radeon: vendor="X.Org Foundation"

[ 26096.898]  compiled for 1.19.0, module version = 7.8.0

[ 26096.898]  Module class: X.Org Video Driver

[ 26096.898]  ABI class: X.Org Video Driver, version 23.0

[ 26096.898] (II) LoadModule: "modesetting"

[ 26096.899] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so

[ 26096.911] (II) Module modesetting: vendor="X.Org Foundation"

[ 26096.911]  compiled for 1.19.2, module version = 1.19.2

[ 26096.911]  Module class: X.Org Video Driver

[ 26096.911]  ABI class: X.Org Video Driver, version 23.0

[ 26096.911] (II) LoadModule: "fbdev"

[ 26096.911] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so

[ 26096.912] (II) Module fbdev: vendor="X.Org Foundation"

[ 26096.912]  compiled for 1.19.0, module version = 0.4.4

[ 26096.912]  Module class: X.Org Video Driver

[ 26096.912]  ABI class: X.Org Video Driver, version 23.0

[ 26096.912] (II) LoadModule: "vesa"

[ 26096.912] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so

[ 26096.913] (II) Module vesa: vendor="X.Org Foundation"

[ 26096.913]  compiled for 1.19.0, module version = 2.3.4

[ 26096.913]  Module class: X.Org Video Driver

[ 26096.913]  ABI class: X.Org Video Driver, version 23.0

[ 26096.913] (II) RADEON: Driver for ATI/AMD Radeon chipsets:

  ATI Radeon Mobility X600 (M24), ATI FireMV 2400,

  ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,

  ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),

  ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),

  ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,

  ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,

  ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,

  ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,

  ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),

  ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,

  ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),

  ATI Radeon X800SE (R420), ATI FireGL X3 (R420),

  ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),

  ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),

  ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),

  ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),

  ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,

  ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,

  ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),

  ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,

  ATI Radeon 9800PRO, ATI Radeon 9800XT,

  ATI Radeon Mobility 9600/9700 (M10/M11),

  ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),

  ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),

  ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,

  ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,

  ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),

  ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),

  ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),

  ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),

  ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),

  ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),

  ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),

  ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),

  ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),

  ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,

  ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,

  ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),

  ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),

  ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),

  ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),

  ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),

  ATI Radeon X850, ATI unknown Radeon / FireGL (R480),

  ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),

  ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),

  ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),

  ATI Radeon X1800, ATI Mobility Radeon X1800 XT,

  ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,

  ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,

  ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,

  ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,

  ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,

  ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,

  ATI FireGL V3350, ATI Mobility Radeon X1450,

  ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,

  ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,

  ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,

  ATI FireGL V3400, ATI Mobility FireGL V5250,

  ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,

  ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,

  ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,

  ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,

  ATI FireGL V7400, ATI Radeon 9100 PRO IGP,

  ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,

  ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,

  ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,

  ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,

  ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),

  ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,

  ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,

  AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),

  ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,

  ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,

  ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,

  ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,

  ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],

  ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),

  ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,

  ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,

  ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,

  ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,

  ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,

  ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,

  ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,

  ATI Mobility Radeon HD 3850, ATI Radeon HD3850,

  ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,

  ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,

  ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,

  ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,

  ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,

  ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,

  ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,

  ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,

  ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,

  ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,

  ATI FireGL V3600, ATI Radeon HD 2600 LE,

  ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,

  ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,

  ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,

  ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,

  ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,

  ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,

  ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,

  ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,

  ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,

  ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,

  ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,

  AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,

  AMD Radeon HD 6300 Series Graphics,

  AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,

  ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,

  AMD Firestream 9350, ATI Radeon HD 5800 Series,

  ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,

  ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,

  ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,

  ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,

  REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,

  ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,

  AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,

  AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,

  ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,

  MULLINS, KAVERI, HAWAII

[ 26096.922] (II) modesetting: Driver for Modesetting Kernel Drivers: kms

[ 26096.922] (II) FBDEV: driver for framebuffer: fbdev

[ 26096.922] (II) VESA: driver for VESA chipsets: vesa

[ 26096.922] (II) [KMS] Kernel modesetting enabled.

[ 26096.922] (WW) Falling back to old probe method for modesetting

[ 26096.923] (WW) Falling back to old probe method for fbdev

[ 26096.923] (II) Loading sub module "fbdevhw"

[ 26096.923] (II) LoadModule: "fbdevhw"

[ 26096.923] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so

[ 26096.929] (II) Module fbdevhw: vendor="X.Org Foundation"

[ 26096.929]  compiled for 1.19.2, module version = 0.0.2

[ 26096.929]  ABI class: X.Org Video Driver, version 23.0

[ 26096.929] (WW) Falling back to old probe method for vesa

[ 26096.929] (II) RADEON(0): Creating default Display subsection in Screen section

  "Default Screen Section" for depth/fbbpp 24/32

[ 26096.929] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32

[ 26096.929] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)

[ 26096.929] (==) RADEON(0): Default visual is TrueColor

[ 26096.929] (==) RADEON(0): RGB weight 888

[ 26096.929] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)

[ 26096.929] (--) RADEON(0): Chipset: "ATI Radeon X600 (RV370)" (ChipID = 0x5b62)

[ 26096.929] (II) Loading sub module "fb"

[ 26096.929] (II) LoadModule: "fb"

[ 26096.930] (II) Loading /usr/lib/xorg/modules/libfb.so

[ 26096.945] (II) Module fb: vendor="X.Org Foundation"

[ 26096.945]  compiled for 1.19.2, module version = 1.0.0

[ 26096.945]  ABI class: X.Org ANSI C Emulation, version 0.4

[ 26096.945] (II) Loading sub module "dri2"

[ 26096.945] (II) LoadModule: "dri2"

[ 26096.945] (II) Module "dri2" already built-in

[ 26096.945] (II) Loading sub module "exa"

[ 26096.945] (II) LoadModule: "exa"

[ 26096.945] (II) Loading /usr/lib/xorg/modules/libexa.so

[ 26096.946] (II) Module exa: vendor="X.Org Foundation"

[ 26096.946]  compiled for 1.19.2, module version = 2.6.0

[ 26096.946]  ABI class: X.Org Video Driver, version 23.0

[ 26096.946] (II) RADEON(0): KMS Color Tiling: enabled

[ 26096.946] (II) RADEON(0): KMS Color Tiling 2D: disabled

[ 26096.946] (II) RADEON(0): KMS Pageflipping: enabled

[ 26096.946] (II) RADEON(0): SwapBuffers wait for vsync: enabled

[ 26096.977] (II) RADEON(0): Output VGA-0 has no monitor section

[ 26096.988] (II) RADEON(0): Output DVI-0 has no monitor section

[ 26096.998] (II) RADEON(0): Output S-video has no monitor section

[ 26097.028] (II) RADEON(0): EDID for output VGA-0

[ 26097.028] (II) RADEON(0): Manufacturer: SCL  Model: 0  Serial#: 0

[ 26097.028] (II) RADEON(0): Year: 2005  Week: 0

[ 26097.028] (II) RADEON(0): EDID Version: 1.3

[ 26097.028] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V

[ 26097.029] (II) RADEON(0): Sync:  Separate  Composite  SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen

[ 26097.029] (II) RADEON(0): Indeterminate output size

[ 26097.029] (II) RADEON(0): Gamma: 2.40

[ 26097.029] (II) RADEON(0): No DPMS capabilities specified; RGB/Color Display

[ 26097.029] (II) RADEON(0): First detailed timing is preferred mode

[ 26097.029] (II) RADEON(0): redX: 0.634 redY: 0.354   greenX: 0.304 greenY: 0.581

[ 26097.029] (II) RADEON(0): blueX: 0.143 blueY: 0.102   whiteX: 0.318 whiteY: 0.339

[ 26097.029] (II) RADEON(0): Supported established timings:

[ 26097.029] (II) RADEON(0): 720x400@70Hz

[ 26097.029] (II) RADEON(0): 640x480@60Hz

[ 26097.029] (II) RADEON(0): 640x480@67Hz

[ 26097.029] (II) RADEON(0): 640x480@72Hz

[ 26097.029] (II) RADEON(0): 640x480@75Hz

[ 26097.029] (II) RADEON(0): 800x600@56Hz

[ 26097.029] (II) RADEON(0): 800x600@60Hz

[ 26097.029] (II) RADEON(0): 800x600@72Hz

[ 26097.029] (II) RADEON(0): 800x600@75Hz

[ 26097.029] (II) RADEON(0): 832x624@75Hz

[ 26097.029] (II) RADEON(0): 1024x768@60Hz

[ 26097.029] (II) RADEON(0): 1024x768@70Hz

[ 26097.029] (II) RADEON(0): 1024x768@75Hz

[ 26097.029] (II) RADEON(0): 1280x1024@75Hz

[ 26097.029] (II) RADEON(0): 1152x864@75Hz

[ 26097.029] (II) RADEON(0): Manufacturer's mask: 0

[ 26097.029] (II) RADEON(0): Supported standard timings:

[ 26097.029] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897

[ 26097.029] (II) RADEON(0): #1: hsize: 1024  vsize 768  refresh: 60  vid: 16481

[ 26097.029] (II) RADEON(0): #2: hsize: 800  vsize 600  refresh: 60  vid: 16453

[ 26097.029] (II) RADEON(0): #3: hsize: 640  vsize 480  refresh: 60  vid: 16433

[ 26097.029] (II) RADEON(0): Supported detailed timing:

[ 26097.029] (II) RADEON(0): clock: 84.7 MHz   Image Size:  920 x 518 mm

[ 26097.029] (II) RADEON(0): h_active: 1360  h_sync: 1408  h_sync_end 1520 h_blank_end 1776 h_border: 0

[ 26097.029] (II) RADEON(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 795 v_border: 0

[ 26097.029] (II) RADEON(0): Supported detailed timing:

[ 26097.029] (II) RADEON(0): clock: 108.0 MHz   Image Size:  338 x 270 mm

[ 26097.029] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0

[ 26097.029] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0

[ 26097.029] (II) RADEON(0): Ranges: V min: 56 V max: 85 Hz, H min: 30 H max: 64 kHz, PixClock max 115 MHz

[ 26097.029] (II) RADEON(0): Monitor name: Sigma Disp.

[ 26097.029] (II) RADEON(0): EDID (in hex):

[ 26097.029] (II) RADEON(0):  00ffffffffffff004c6c000000000000

[ 26097.029] (II) RADEON(0):  000f01030f00008c0a6f8ba25a4d9424

[ 26097.029] (II) RADEON(0):  1a5156bfef8081806140454031400101

[ 26097.029] (II) RADEON(0):  010101010101172150a051001b303070

[ 26097.029] (II) RADEON(0):  130098063200001e302a009851002a40

[ 26097.029] (II) RADEON(0):  30701300520e11000018000000fd0038

[ 26097.029] (II) RADEON(0):  551e400b000a202020202020000000fc

[ 26097.029] (II) RADEON(0):  005369676d6120446973702e0a20000c

[ 26097.029] (II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)

[ 26097.029] (II) RADEON(0): Printing probed modes for output VGA-0

[ 26097.029] (II) RADEON(0): Modeline "1360x768"x60.0   84.71  1360 1408 1520 1776  768 769 772 795 +hsync +vsync (47.7 kHz eP)

[ 26097.029] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz e)

[ 26097.029] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[ 26097.029] (II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[ 26097.030] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[ 26097.041] (II) RADEON(0): EDID for output DVI-0

[ 26097.051] (II) RADEON(0): EDID for output S-video

[ 26097.051] (II) RADEON(0): Output VGA-0 connected

[ 26097.051] (II) RADEON(0): Output DVI-0 disconnected

[ 26097.051] (II) RADEON(0): Output S-video disconnected

[ 26097.051] (II) RADEON(0): Using exact sizes for initial modes

[ 26097.051] (II) RADEON(0): Output VGA-0 using initial mode 1360x768 +0+0

[ 26097.051] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7b44000

[ 26097.051] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM

[ 26097.051] (==) RADEON(0): DPI set to (96, 96)

[ 26097.051] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)

[ 26097.051] (II) Loading sub module "ramdac"

[ 26097.051] (II) LoadModule: "ramdac"

[ 26097.051] (II) Module "ramdac" already built-in

[ 26097.051] (II) UnloadModule: "modesetting"

[ 26097.051] (II) Unloading modesetting

[ 26097.051] (II) UnloadModule: "fbdev"

[ 26097.051] (II) Unloading fbdev

[ 26097.051] (II) UnloadSubModule: "fbdevhw"

[ 26097.051] (II) Unloading fbdevhw

[ 26097.051] (II) UnloadModule: "vesa"

[ 26097.051] (II) Unloading vesa

[ 26097.051] (--) Depth 24 pixmap format is 32 bpp

[ 26097.051] (II) RADEON(0): [DRI2] Setup complete

[ 26097.051] (II) RADEON(0): [DRI2]   DRI driver: r300

[ 26097.051] (II) RADEON(0): [DRI2]   VDPAU driver: r300

[ 26097.052] (II) RADEON(0): Front buffer size: 4224K

[ 26097.052] (II) RADEON(0): VRAM usage limit set to 109771K

[ 26097.052] (==) RADEON(0): DRI3 disabled

[ 26097.052] (==) RADEON(0): Backing store enabled

[ 26097.052] (II) RADEON(0): Direct rendering enabled

[ 26097.052] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.

[ 26097.052] (II) EXA(0): Driver allocated offscreen pixmaps

[ 26097.052] (II) EXA(0): Driver registered support for the following operations:

[ 26097.052] (II)         Solid

[ 26097.052] (II)         Copy

[ 26097.052] (II)         Composite (RENDER acceleration)

[ 26097.052] (II)         UploadToScreen

[ 26097.052] (II)         DownloadFromScreen

[ 26097.052] (II) RADEON(0): Acceleration enabled

[ 26097.052] (==) RADEON(0): DPMS enabled

[ 26097.052] (==) RADEON(0): Silken mouse enabled

[ 26097.052] (II) RADEON(0): Set up textured video

[ 26097.052] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.

[ 26097.052] (II) RADEON(0): [XvMC] Extension initialized.

[ 26097.052] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.

[ 26097.052] (--) RandR disabled

[ 26097.059] (II) SELinux: Disabled on system

[ 26097.097] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer

[ 26097.097] (II) AIGLX: enabled GLX_ARB_create_context

[ 26097.097] (II) AIGLX: enabled GLX_ARB_create_context_profile

[ 26097.097] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile

[ 26097.097] (II) AIGLX: enabled GLX_INTEL_swap_event

[ 26097.097] (II) AIGLX: enabled GLX_SGI_swap_control

[ 26097.097] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB

[ 26097.097] (II) AIGLX: enabled GLX_ARB_fbconfig_float

[ 26097.097] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float

[ 26097.097] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects

[ 26097.098] (II) AIGLX: Loaded and initialized r300

[ 26097.098] (II) GLX: Initialized DRI2 GL provider for screen 0

[ 26097.098] (II) RADEON(0): Setting screen physical size to 359 x 203

[ 26097.393] (II) config/udev: Adding input device Power Button (/dev/input/event3)

[ 26097.393] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[ 26097.393] (II) LoadModule: "libinput"

[ 26097.393] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so

[ 26097.434] (II) Module libinput: vendor="X.Org Foundation"

[ 26097.434]  compiled for 1.19.0, module version = 0.23.0

[ 26097.434]  Module class: X.Org XInput Driver

[ 26097.434]  ABI class: X.Org XInput driver, version 24.1

[ 26097.434] (II) Using input driver 'libinput' for 'Power Button'

[ 26097.434] (**) Power Button: always reports core events

[ 26097.434] (**) Option "Device" "/dev/input/event3"

[ 26097.434] (**) Option "_source" "server/udev"

[ 26097.434] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard

[ 26097.434] (II) input device 'Power Button', /dev/input/event3 is a keyboard

[ 26097.448] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"

[ 26097.448] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)

[ 26097.448] (**) Option "xkb_model" "pc105"

[ 26097.448] (**) Option "xkb_layout" "fr"

[ 26097.448] (**) Option "xkb_variant" "latin9"

[ 26097.536] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard

[ 26097.536] (II) input device 'Power Button', /dev/input/event3 is a keyboard

[ 26097.537] (II) config/udev: Adding input device Power Button (/dev/input/event2)

[ 26097.537] (**) Power Button: Applying InputClass "libinput keyboard catchall"

[ 26097.537] (II) Using input driver 'libinput' for 'Power Button'

[ 26097.538] (**) Power Button: always reports core events

[ 26097.538] (**) Option "Device" "/dev/input/event2"

[ 26097.538] (**) Option "_source" "server/udev"

[ 26097.538] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard

[ 26097.538] (II) input device 'Power Button', /dev/input/event2 is a keyboard

[ 26097.556] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"

[ 26097.556] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)

[ 26097.556] (**) Option "xkb_model" "pc105"

[ 26097.556] (**) Option "xkb_layout" "fr"

[ 26097.556] (**) Option "xkb_variant" "latin9"

[ 26097.557] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard

[ 26097.557] (II) input device 'Power Button', /dev/input/event2 is a keyboard

[ 26097.558] (II) config/udev: Adding input device HDA NVidia Line Out Surround (/dev/input/event9)

[ 26097.558] (II) No input driver specified, ignoring this device.

[ 26097.558] (II) This device may have been added with another device file.

[ 26097.559] (II) config/udev: Adding input device HDA NVidia Line Out CLFE (/dev/input/event10)

[ 26097.559] (II) No input driver specified, ignoring this device.

[ 26097.559] (II) This device may have been added with another device file.

[ 26097.560] (II) config/udev: Adding input device HDA NVidia Line Out Side (/dev/input/event11)

[ 26097.560] (II) No input driver specified, ignoring this device.

[ 26097.560] (II) This device may have been added with another device file.

[ 26097.561] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)

[ 26097.561] (II) No input driver specified, ignoring this device.

[ 26097.561] (II) This device may have been added with another device file.

[ 26097.562] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event6)

[ 26097.562] (II) No input driver specified, ignoring this device.

[ 26097.562] (II) This device may have been added with another device file.

[ 26097.562] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)

[ 26097.562] (II) No input driver specified, ignoring this device.

[ 26097.562] (II) This device may have been added with another device file.

[ 26097.563] (II) config/udev: Adding input device HDA NVidia Line Out Front (/dev/input/event8)

[ 26097.563] (II) No input driver specified, ignoring this device.

[ 26097.563] (II) This device may have been added with another device file.

[ 26097.565] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)

[ 26097.565] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"

[ 26097.565] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'

[ 26097.565] (**) AT Translated Set 2 keyboard: always reports core events

[ 26097.565] (**) Option "Device" "/dev/input/event0"

[ 26097.565] (**) Option "_source" "server/udev"

[ 26097.566] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[ 26097.566] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[ 26097.596] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"

[ 26097.596] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)

[ 26097.596] (**) Option "xkb_model" "pc105"

[ 26097.596] (**) Option "xkb_layout" "fr"

[ 26097.596] (**) Option "xkb_variant" "latin9"

[ 26097.598] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard

[ 26097.598] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard

[ 26097.599] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event1)

[ 26097.599] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "libinput pointer catchall"

[ 26097.599] (II) Using input driver 'libinput' for 'ImPS/2 Logitech Wheel Mouse'

[ 26097.599] (**) ImPS/2 Logitech Wheel Mouse: always reports core events

[ 26097.599] (**) Option "Device" "/dev/input/event1"

[ 26097.599] (**) Option "_source" "server/udev"

[ 26097.600] (II) input device 'ImPS/2 Logitech Wheel Mouse', /dev/input/event1 is tagged by udev as: Mouse

[ 26097.601] (II) Device 'ImPS/2 Logitech Wheel Mouse' set to 400 DPI

[ 26097.601] (II) input device 'ImPS/2 Logitech Wheel Mouse', /dev/input/event1 is a pointer caps

[ 26097.636] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"

[ 26097.636] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)

[ 26097.636] (**) Option "AccelerationScheme" "none"

[ 26097.636] (**) ImPS/2 Logitech Wheel Mouse: (accel) selected scheme none/0

[ 26097.636] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000

[ 26097.636] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4

[ 26097.637] (II) input device 'ImPS/2 Logitech Wheel Mouse', /dev/input/event1 is tagged by udev as: Mouse

[ 26097.637] (II) Device 'ImPS/2 Logitech Wheel Mouse' set to 400 DPI

[ 26097.637] (II) input device 'ImPS/2 Logitech Wheel Mouse', /dev/input/event1 is a pointer caps

[ 26097.637] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)

[ 26097.637] (II) No input driver specified, ignoring this device.

[ 26097.637] (II) This device may have been added with another device file.

[ 26097.638] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)

[ 26097.638] (II) No input driver specified, ignoring this device.

[ 26097.638] (II) This device may have been added with another device file.

[ 26106.839] (II) RADEON(0): EDID vendor "SCL", prod id 0

[ 26106.839] (II) RADEON(0): Using EDID range info for horizontal sync

[ 26106.839] (II) RADEON(0): Using EDID range info for vertical refresh

[ 26106.839] (II) RADEON(0): Printing DDC gathered Modelines:

[ 26106.839] (II) RADEON(0): Modeline "1360x768"x0.0   84.71  1360 1408 1520 1776  768 769 772 795 +hsync +vsync (47.7 kHz eP)

[ 26106.839] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[ 26106.839] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[ 26108.487] (II) RADEON(0): EDID vendor "SCL", prod id 0

[ 26108.487] (II) RADEON(0): Using hsync ranges from config file

[ 26108.487] (II) RADEON(0): Using vrefresh ranges from config file

[ 26108.487] (II) RADEON(0): Printing DDC gathered Modelines:

[ 26108.487] (II) RADEON(0): Modeline "1360x768"x0.0   84.71  1360 1408 1520 1776  768 769 772 795 +hsync +vsync (47.7 kHz eP)

[ 26108.487] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[ 26108.487] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

[ 26861.997] (II) RADEON(0): EDID vendor "SCL", prod id 0

[ 26861.997] (II) RADEON(0): Using hsync ranges from config file

[ 26861.997] (II) RADEON(0): Using vrefresh ranges from config file

[ 26861.997] (II) RADEON(0): Printing DDC gathered Modelines:

[ 26861.997] (II) RADEON(0): Modeline "1360x768"x0.0   84.71  1360 1408 1520 1776  768 769 772 795 +hsync +vsync (47.7 kHz eP)

[ 26861.997] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)

[ 26861.998] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

tuxis@Tuxlinux:~$

tuxis · 22-05-2018 23:34:31

pourquoi forcer la définition 1280×768 (15:9) sur un moniteur 16:9 ?
sur l’écran tv dans: menu-> PC il est écrit en bas: 1280x768 55hz
dans menu il a la fonction large, ça s'adapte à la carte vidéo 1360x768 60hz mais la fréquence est trop haute !

anonyme · 23-05-2018 09:05:32

Bonjour
ceci une limitation de ta carte graphique

[ 26097.029] (II) RADEON(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)

 

tu demande l' impossible , une ancienne télévision n'est pas optimisé pour afficher le signal d un ordinateur.
mais plutot un signal HF de l'époque , prise péritel , DVD , magnétoscope , lazerdisc etc ........ (voir de quelle année elle est ? ) , ma 82 cm TFT en HD fonctionne très mal sur un ordinateur (voir pas du tout).
a l'époque tube cathodique et TFT était en vente encore . (pas toute jeune) une 60Kg , l'autre environ 15kg .....
ps: je jouais a partir d un PC (cordon DVI) a l'époque au jeux de voiture en 800x600 , le bureau de windows vraiment laid (baveux) , de mémoire 1280x1024 max (début du format HD ) , tuner analogique pour la réception

sinon pour les commandes installe le paquet edid-decode

apt-get install edid-decode

 

sur un vieux TFT ACER de 19 pouces en HDMI ça donne ceci

ls -l /sys/class/drm/*/edid

 

retour

-r--r--r-- 1 root root 0 mai   23 09:47 /sys/class/drm/card0-DP-1/edid

-r--r--r-- 1 root root 0 mai   23 09:47 /sys/class/drm/card0-DP-2/edid

-r--r--r-- 1 root root 0 mai   23 09:47 /sys/class/drm/card0-DVI-D-1/edid

-r--r--r-- 1 root root 0 mai   23 09:39 /sys/class/drm/card0-HDMI-A-1/edid

edid-decode /sys/class/drm/card0-HDMI-A-1/edid

 

retour

Extracted contents:

header:          00 ff ff ff ff ff ff 00

serial number:   04 72 1e 00 4b 54 10 95 33 13

version:         01 03

basic params:    80 28 19 6b 2a

chroma info:     67 60 a2 5a 49 9e 23 13 50 54

established:     bf ef 00

standard:        81 8f 81 80 95 00 95 0f 81 00 71 4f 01 01 01 01

descriptor 1:    9a 29 a0 d0 51 84 22 30 50 98 36 00 98 ff 10 00 00 1c

descriptor 2:    00 00 00 ff 00 4c 42 54 30 38 30 34 34 34 32 31 34 0a

descriptor 3:    00 00 00 fd 00 37 4b 1e 53 0e 00 0a 20 20 20 20 20 20

descriptor 4:    00 00 00 fc 00 41 63 65 72 20 42 31 39 33 57 0a 20 20

extensions:      00

checksum:        fd

Manufacturer: ACR Model 1e Serial Number 2500875339

Made week 51 of 2009

EDID version: 1.3

Digital display

Maximum image size: 40 cm x 25 cm

Gamma: 2.07

DPMS levels: Off

Supported color formats: RGB 4:4:4, YCrCb 4:4:4

First detailed timing is preferred timing

Established timings supported:

  720x400@70Hz

  640x480@60Hz

  640x480@67Hz

  640x480@72Hz

  640x480@75Hz

  800x600@56Hz

  800x600@60Hz

  800x600@72Hz

  800x600@75Hz

  832x624@75Hz

  1024x768@60Hz

  1024x768@70Hz

  1024x768@75Hz

  1280x1024@75Hz

Standard timings supported:

  1280x1024@75Hz

  1280x1024@60Hz

  1440x900@60Hz

  1440x900@75Hz

  1280x800@60Hz

  1152x864@75Hz

Detailed mode: Clock 106.500 MHz, 408 mm x 255 mm

               1440 1520 1672 1904 hborder 0

                900  903  909  934 vborder 0

               -hsync +vsync 

Serial number: LBT080444214

Monitor ranges (GTF): 55-75Hz V, 30-83kHz H, max dotclock 140MHz

Monitor name: Acer

Checksum: 0xfd (valid)

EDID block does NOT conform to EDID 1.3!

  Detailed block string not properly terminated

a partir de => "Standard timings supported:" le retour est intéressant

Dernière modification par anonyme (23-05-2018 09:25:27)

tuxis · 23-05-2018 12:54:31

TS SL3205TS elle doit avoir dans les 12ans.
http://www.homecinema-fr.com/forum/ecra … 32216.html

Dernière modification par tuxis (23-05-2018 13:11:56)

tuxis · 23-05-2018 13:01:59

ls -l /sys/class/drm/*/edid

-r--r--r-- 1 root root 0 mai   23 13:59 /sys/class/drm/card0-DVI-I-1/edid

-r--r--r-- 1 root root 0 mai   23 13:59 /sys/class/drm/card0-SVIDEO-1/edid

-r--r--r-- 1 root root 0 mai   23 13:57 /sys/class/drm/card0-VGA-1/edid

root@Tuxlinux:/home/tuxis# edid-decode /sys/class/drm/card0-HDMI-A-1/edid

/sys/class/drm/card0-HDMI-A-1/edid: No such file or directory

root@Tuxlinux:/home/tuxis#

bloc à supprimer si la commande n’affiche rien

anonyme · 23-05-2018 13:05:10

faut utiliser la commande a éfpé

edid-decode /sys/class/drm/card0-VGA-1/edid

 

qui correspond a la sortie VGA pour toi
nota: j'ai juste mit un exemple pour te montrer que la commande fonctionne quand le paquet est installé (moi je suis sur une sortie différente (HDMI) ; (APU RAVEN 2200G) de 2018 .... )

cette commande sert a connaître les sorties disponibles sur ta carte graphique

ls -l /sys/class/drm/*/edid

 

si tu ne comprend pas quelque chose dans une commande , demande on t' expliquera

bon je pourrai faire un test sur ma veille télévision , avec un Pi 3 (raspberry) je n'ai pas réussit a trouver une bonne définition pour la sortie HDMI du PI3 sur ce TV

Dernière modification par anonyme (23-05-2018 13:15:15)

tuxis · 23-05-2018 13:23:54

Je n'ai que le cable double mâle SVGA

Extracted contents:

header:          00 ff ff ff ff ff ff 00

serial number:   4c 6c 00 00 00 00 00 00 00 0f

version:         01 03

basic params:    0f 00 00 8c 0a

chroma info:     6f 8b a2 5a 4d 94 24 1a 51 56

established:     bf ef 80

standard:        81 80 61 40 45 40 31 40 01 01 01 01 01 01 01 01

descriptor 1:    17 21 50 a0 51 00 1b 30 30 70 13 00 98 06 32 00 00 1e

descriptor 2:    30 2a 00 98 51 00 2a 40 30 70 13 00 52 0e 11 00 00 18

descriptor 3:    00 00 00 fd 00 38 55 1e 40 0b 00 0a 20 20 20 20 20 20

descriptor 4:    00 00 00 fc 00 53 69 67 6d 61 20 44 69 73 70 2e 0a 20

extensions:      00

checksum:        0c

Manufacturer: SCL Model 0 Serial Number 0

EDID version: 1.3

Analog display, Input voltage level: 0.7/0.3 V

Sync: Separate Composite SyncOnGreen Serration 

Image size is variable

Gamma: 2.40

RGB color display

First detailed timing is preferred timing

Established timings supported:

  720x400@70Hz

  640x480@60Hz

  640x480@67Hz

  640x480@72Hz

  640x480@75Hz

  800x600@56Hz

  800x600@60Hz

  800x600@72Hz

  800x600@75Hz

  832x624@75Hz

  1024x768@60Hz

  1024x768@70Hz

  1024x768@75Hz

  1280x1024@75Hz

  1152x870@75Hz

Standard timings supported:

  1280x1024@60Hz

  1024x768@60Hz

  800x600@60Hz

  640x480@60Hz

Detailed mode: Clock 84.710 MHz, 920 mm x 518 mm

               1360 1408 1520 1776 hborder 0

                768  769  772  795 vborder 0

               +hsync +vsync 

Detailed mode: Clock 108.000 MHz, 338 mm x 270 mm

               1280 1328 1440 1688 hborder 0

               1024 1025 1028 1066 vborder 0

               -hsync -vsync 

Monitor ranges (GTF): 56-85Hz V, 30-64kHz H, max dotclock 110MHz

Monitor name: Sigma

Checksum: 0xc (valid)

EDID block does NOT conform to EDID 1.3!

  Detailed block string not properly terminated

EDID block does not conform at all!

  Bad year of manufacture

ce qui est étrange c'est que l'affichage 1360x768 existe et fonctionne TB mais il n'est pas mentionner dans edid-decode /sys/class/drm/card0-VGA-1/edid

Dernière modification par tuxis (23-05-2018 13:24:27)

anonyme · 23-05-2018 13:47:12

ma télé est de mars 2005 et elle a a peu prés la meme chose que la tienne 1280x1024x60 maximum .
ta carte graphique a un souci avec le 1280x1024 , voir mon #10

èfpé va pouvoir te répondre maintenant que tu a posté le retour

tuxis · 23-05-2018 14:05:08

avant , après mais pas: 1280x768 55Hz comme le souhaite l'ecran

èfpé · 23-05-2018 14:24:42

Bonjour !

@tuxis : alors en fait, si ; le mode 1360x768_60.00 est le « First detailed timing is preferred mode » (cf. #7 et 8) ;

Par contre, le mode 1280x768_55.00 n'apparaît nulle part et risque de planter l'affichage si on essaie de forcer !
Ce téléviseur supporte la plage de fréquence de rafraîchissement vertical 56-85 Hz ; aucun souci à ce niveau-là.

apt install read-edid

modprobe i2c-dev

get-edid | parse-edid

la dernière commande récupère directement les données EDID et les présente un peu différemment.

tuxis · 23-05-2018 16:57:00

Merci
root@Tuxlinux:/home/tuxis#

 modprobe i2c-dev

root@Tuxlinux:/home/tuxis#

get-edid | parse-edid

This is read-edid version 3.0.2. Prepare for some fun.

Attempting to use i2c interface

No EDID on bus 0

No EDID on bus 1

No EDID on bus 3

1 potential busses found: 2

256-byte EDID successfully retrieved from i2c bus 2

Looks like i2c was successful. Have a good day.

Checksum Correct

Section "Monitor"

  Identifier "Sigma Disp."

  ModelName "Sigma Disp."

  VendorName "SCL"

  # Monitor Manufactured week 0 of 2005

  # EDID version 1.3

  # Analog Display

  Option "SyncOnGreen" "true"

  # Display Physical Size not given. Normal for projectors.

  Gamma 2.40

  Option "DPMS" "false"

  Horizsync 30-64

  VertRefresh 56-85

  # Maximum pixel clock is 110MHz

  #Not giving standard mode: 1280x1024, 60Hz

  #Not giving standard mode: 1024x768, 60Hz

  #Not giving standard mode: 800x600, 60Hz

  #Not giving standard mode: 640x480, 60Hz

  Modeline  "Mode 0" +hsync +vsync 

  Modeline  "Mode 1" -hsync -vsync 

EndSection

root@Tuxlinux:/home/tuxis#

1024x768, 60Hz il y à aussi le 1360 mais il n’apparaît pas; toujours est il que le plus proche reste le 1360 celui qui est demander "risque de planter l'affichage si on essaie de forcer" donc je vais me contenter du 1360
MERCI pour votre aide ! c’était fort instructif

!bonne semaine @+ et encore

Edit : séparation des commandes et des retours avec les balises qui vont bien. Voir le tuto : Le code, ça pique moins les yeux en couleur

Dernière modification par tuxis (23-05-2018 16:59:22)

Debian-facile

#1 12-05-2018 11:09:51

[Résolu] Prob affichage ecran changè

#2 13-05-2018 10:51:56

Re : [Résolu] Prob affichage ecran changè

#3 19-05-2018 15:08:29

Re : [Résolu] Prob affichage ecran changè

#4 19-05-2018 18:17:06

Re : [Résolu] Prob affichage ecran changè

#5 22-05-2018 18:52:53

Re : [Résolu] Prob affichage ecran changè

#6 22-05-2018 20:24:42

Re : [Résolu] Prob affichage ecran changè

#7 22-05-2018 23:21:50

Re : [Résolu] Prob affichage ecran changè

#8 22-05-2018 23:23:05

Re : [Résolu] Prob affichage ecran changè

#9 22-05-2018 23:34:31

Re : [Résolu] Prob affichage ecran changè

#10 23-05-2018 09:05:32

Re : [Résolu] Prob affichage ecran changè

#11 23-05-2018 12:54:31

Re : [Résolu] Prob affichage ecran changè

#12 23-05-2018 13:01:59

Re : [Résolu] Prob affichage ecran changè

#13 23-05-2018 13:05:10

Re : [Résolu] Prob affichage ecran changè

#14 23-05-2018 13:23:54

Re : [Résolu] Prob affichage ecran changè

#15 23-05-2018 13:47:12

Re : [Résolu] Prob affichage ecran changè

#16 23-05-2018 14:05:08

Re : [Résolu] Prob affichage ecran changè

#17 23-05-2018 14:24:42

Re : [Résolu] Prob affichage ecran changè

#18 23-05-2018 16:57:00

Re : [Résolu] Prob affichage ecran changè

Pied de page des forums