Bonjour,
Après avoir bataillé plusieurs jours sur la configuration correcte de Xorg, je poste ici afin d'avoir un complément d'informations qui pourraient par la suite m'aider à résoudre mon affichage.
Pour situer le problème j'utilise une version Lenny de Debian minimaliste installée sur une CF. Ma carte mère propose 3 sorties d'affichage: VGA-LVDS1-LVDS2.
Driver intel 945GME.
J'utilise un écran "exotique" en résolution 1440x900.
Mes premières config de Xorg sur la Lenny avec le driver stable "xserver-xorg-video-intel" ne me permettaient pas d'avoir accès a un 1440x900, même en rajoutant les modes a la main.
J'ai donc updaté le driver intel dans sa dernière version Testing. L'affichage sur mon écran restait tronqué mais le mode 1440x900 était bien détecté directement (un xrandr me renvoyait ce mode pour la sortie LVDS2), mais j'étais pluggé sur la LVDS1...
Puis j'ai installé une version Testing (6.0 beta 2) + gnome sur ma CF pour modifier via les paramètres (systèmes-préférences-écran) la résolution.
Il m'affiche alors 3 écrans (VGA LVDS1 LVDS2). En désactivant l'écran VGA et LVDS1 je pouvais choisir alors pour le LVDS2 ma résolution de 1440x900 (je ne connaissais pas la limitation des CRTCs).
Ce test étant concluant, je reviens sur ma version de debian stable d'origine avec driver en testing.
Je modifie mon xorg conf pour désactiver toutes mes sorties sauf la LVDS2.
Seulement, comment spécifier clairement quelle sortie video sur la carte désactiver ? (Comment peut il faire le lien entre le LVDS1/2 que xrandr me retourne et le nom de mes monitors section)
Par défaut je mets donc exactement le même nom que xrandr et passe l'option ignore a true.
Je laisse uniquement mon ecran LVDS2 avec preferredMode a 1440x900 (vu que Xrandr trouvait ce mode par défaut)
Seulement après un startx j'ai un écran noir (avec des petites raies)
Je regarde mon log de Xorg et pourtant tout semble Ok,
Aussi comment vérifier qu'un startx fonctionne correctement ?
J'aurais voulu après remodifier directement via Xrandr mais je n'ai pas de terminal d'ouvert.
Ci dessous un xrandr réalisé sur la version avec Gnome (mais utilisant le meme driver)
[c]
Screen 0: minimum 320 x 200, current 1440 x 1024, maximum 4096 x 4096
VGA1 connected (normal left inverted right x axis y axis)
1440x900 59.9 +
1680x1050 60.0 +
1600x1200 60.0
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
LVDS1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x1024 59.7*+ 85.0 75.0 60.0
1280x960 85.0 60.0
1152x864 100.0 85.1 85.0 75.0 75.0 70.0 60.0
1024x768 85.0 75.0 70.1 60.0 43.5
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
LVDS2 connected 1440x900+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1440x900 60.0*+ 59.9
1360x768 59.8 60.0
1152x864 100.0 85.1 85.0 75.0 75.0 70.0 60.0
1024x768 85.0 75.0 70.1 60.0 43.5
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1
TV1 disconnected (normal left inverted right x axis y axis)
[/c]
Voici mon Xorg.conf
[c]
#
# xorg.conf (X.Org X Window System server configuration file)
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# @author TCA <thibault.castel@ineo-gdf-suez.com>
# @date 24/02/2010
#
##############################################################################
# Font directories declaration
##############################################################################
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
EndSection
##############################################################################
# ServerFlags Declaration
##############################################################################
Section "ServerFlags"
# Allows the X session to start without mouse
Option "AllowMouseOpenFail" "On"
# Deactivate screensaver and energy saver settings
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
##############################################################################
# Modules
##############################################################################
Section "Module"
Load "dbe" # Double buffering
Load "dri" # Direct Rendering Infrastructure
Load "extmod"
Load "freetype"
Load "glx"
Load "type1"
Load "record"
EndSection
##############################################################################
# Keyboard declaration
#
# In usual usage, UCINEO will not have any keyboard but this section allows
# an operator to plug an USB keyboard
##############################################################################
# Any USB keyboard, french keymap
Section "InputDevice"
Identifier "USB Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
##############################################################################
# Mouse declaration
#
# In usual usage, UCINEO will not have any mouse but this section allows
# an operator to plug an USB mouse.
##############################################################################
# Any USB mouse
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
##############################################################################
# Monitor declaration
#
# In usual usage, UCINEO will just use LVDS output but VGA output can be
# used in development stage.
#
# WARNING: The VGA output is considered as primary output by the intel driver
# (VGA is connected to the first output pipe, named A). If the VGA output is
# not disabled (or ignored), resolution is limited to the lesser.
#
# REMARK: I ignore all other physical outputs to clean out xrandr outputs.
##############################################################################
Section "Monitor"
Identifier "LVDS2"
Option "DPMS" "on"
# Option "PreferredMode" "1366x768"
Option "PreferredMode" "1440x900"
EndSection
Section "Monitor"
Identifier "LVDS1"
Option "Ignore" "true"
EndSection
Section "Monitor"
Identifier "VGA1"
Option "Ignore" "true"
EndSection
Section "Monitor"
Identifier "TV1"
Option "Ignore" "true"
EndSection
##############################################################################
# Device Declaration
#
# The Option lines are used to link the physical output to the corresponding
# monitor section. Syntax is "Monitor-XXX" where XXX is the name givent to the
# output by the driver (grep Output /var/log/Xorg.0.log
##############################################################################
Section "Device"
Identifier "Intel 945GM"
Driver "intel"
BusID "PCI:0:2:0"
Option "Monitor-LVDS2" "LVDS2"
Option "Monitor-LVDS1" "LVDS1"
Option "Monitor-VGA" "VGA1"
Option "Monitor-TV" "TV"
# Option "MonitorLayout" "LVDS,TMDS-1+VGA" # Ignored by current Intel driver
# Option "FixedPipe" "LVDS" # Ignored by current Intel driver
EndSection
##############################################################################
# Screen Declaration
##############################################################################
Section "Screen"
Identifier "Default"
Device "Intel 945GM"
Monitor "LVDS2"
DefaultDepth 24
SubSection "Display"
Depth 24
# Virtual 1366 768
Virtual 1440 900
EndSubSection
EndSection
##############################################################################
# ServerLayout Declaration
##############################################################################
Section "ServerLayout"
Identifier "Double Layout"
Screen "Default"
InputDevice "USB Keyboard"
InputDevice "USB Mouse"
EndSection
[/c]
Et mon log qui pourtant ne m'affiche pas d'erreurs de résolution ou d'affichage
[c]
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-686 i686 Debian
Current Operating System: Linux ucineo 2.6.32-5-686 #1 SMP Fri Dec 10 16:12:40 UTC 2010 i686
Kernel command line: root=UUID=4c09d466-1797-4aea-b3dd-cc2fbe4d68f4 ro video=vesafb:ywrap,mtrr vga=792
Build Date: 02 December 2010 01:08:37AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check
http://wiki.x.org to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 19:25:01 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Double Layout"
(**) |-->Screen "Default" (0)
(**) | |-->Monitor "LVDS2"
(**) | |-->Device "Intel 945GM"
(**) |-->Input Device "USB Keyboard"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "On"
(**) Option "BlankTime" "0"
(**) Option "StandbyTime" "0"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling USB Keyboard
(WW) Disabling USB Mouse
(II) Loader magic: 0x81ec060
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27ae:8086:27ae Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xfdf00000/524288, 0xd0000000/268435456, 0xfdf80000/262144, I/O @ 0x0000ff00/8
(--) PCI: (0:0:2:1) 8086:27a6:8086:27ae Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xfde80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 using monitor section VGA1
(**) intel(0): Option "Ignore" "true"
(II) intel(0): Output LVDS1 using monitor section LVDS1
(**) intel(0): Option "Ignore" "true"
(II) intel(0): Output LVDS2 using monitor section LVDS2
(**) intel(0): Option "PreferredMode" "1440x900"
(II) intel(0): Output TV1 using monitor section TV1
(**) intel(0): Option "Ignore" "true"
(II) intel(0): EDID for output LVDS2
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (height too large for virtual size)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS2
(II) intel(0): Modeline "1440x900"x60.0 103.80 1440 1456 1568 1840 900 901 904 940 (56.4 kHz)
(II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
(II) intel(0): Modeline "1152x864"x100.0 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync (91.5 kHz)
(II) intel(0): Modeline "1152x864"x85.1 121.50 1152 1216 1344 1568 864 865 868 911 +hsync -vsync (77.5 kHz)
(II) intel(0): Modeline "1152x864"x85.0 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync (77.1 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.6 kHz)
(II) intel(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz)
(II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): Output LVDS2 connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS2 using initial mode 1440x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): Allocated new frame buffer 1472x900 stride 8192, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "Monitor-VGA" is not used
(WW) intel(0): Option "Monitor-TV" is not used
(WW) intel(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 380 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event3)
(**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Dell Dell USB Keyboard: always reports core events
(**) Dell Dell USB Keyboard: Device: "/dev/input/event3"
(II) Dell Dell USB Keyboard: Found keys
(II) Dell Dell USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event4)
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event4"
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event0)
(II) No input driver/identifier specified (ignoring)
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Dell Dell USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Close
(II) UnloadModule: "evdev"
[/c]
Ce qui diffère avec les principales configs et option détaillées sur le site de Xorg, c'est qu'il y a 2 sorties LVDS sur la carte et que ces 2 sorties n'ont pas la meme propriété (je ne peux utiliser que la LVDS2).
Sur des autres tests (fait quand j'étais en versuion stable) un startx ne m'affichais pas une bonne résolution mais j'avais quand meme quelque chose avec un terminal (et je pouvais ensuite utiliser xrandr).
Merci beaucoup d'avance,
Bonne fin de soirée
GuitouX2