logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 10-09-2011 22:17:40

Lætitia
Modette
Lieu : Normandie du Nord
Distrib. : Stretch
Noyau : 4.6.0-1-amd64
(G)UI : Xfce4
Inscription : 14-04-2010
Site Web

données smart

bonjour,
ce soir, j'ai entendu un petit "tchap" dans mon PC (non, ce n'est pas Jojo). Cela m'a fait pensé au bruit que fait mon PC quand il s'éteint.Ce PC a 26 mois et tourne tous les jours.

Curieuse, je suis allée voir ce que raconte smartmontools. Et j'ai regardé la doc, paragraphe 3.2 Vérification pour contrôler le veillissement de mon disque dur.
Je vous donne le résultat de "smartctl -a /dev/sda"

smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-1-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Travelstar 5K320
Device Model:     Hitachi HTS543225L9A300
Serial Number:    090314FB2D00LJGR4AEB
LU WWN Device Id: 5 000cca 55eca1071
Firmware Version: FBEOC40C
User Capacity:    250 059 350 016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3f
Local Time is:    Sat Sep 10 22:44:08 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
          was never started.
          Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    (  645) seconds.
Offline data collection
capabilities:        (0x5b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          No Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 102) minutes.
SCT capabilities:          (0x003d) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   253   253   033    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       903
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   088   088   000    Old_age   Always       -       5312
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       897
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       40
193 Load_Cycle_Count        0x0012   075   075   000    Old_age   Always       -       256918
194 Temperature_Celsius     0x0002   137   137   000    Old_age   Always       -       40 (Min/Max 13/51)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 4
  CR = Command Register [HEX]
  FR = Features Register [HEX]
  SC = Sector Count Register [HEX]
  SN = Sector Number Register [HEX]
  CL = Cylinder Low Register [HEX]
  CH = Cylinder High Register [HEX]
  DH = Device/Head Register [HEX]
  DC = Device Command Register [HEX]
  ER = Error register [HEX]
  ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 41 84 1c e0  Error: IDNF at LBA = 0x001c8441 = 1868865

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  24 03 01 41 84 1c e0 00      00:04:51.200  READ SECTOR(S) EXT
  25 03 01 41 84 1c e0 00      00:04:50.800  READ DMA EXT
  ef 03 46 ff ff 00 e0 00      00:01:08.700  SET FEATURES [Set transfer mode]
  ef 03 0c ff ff 00 e0 00      00:01:08.700  SET FEATURES [Set transfer mode]
  c6 ff 10 ff ff 00 e0 00      00:01:08.700  SET MULTIPLE MODE

Error 3 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 41 84 1c e0  Error: IDNF 1 sectors at LBA = 0x001c8441 = 1868865

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 03 01 41 84 1c e0 00      00:04:50.800  READ DMA EXT
  ef 03 46 ff ff 00 e0 00      00:01:08.700  SET FEATURES [Set transfer mode]
  ef 03 0c ff ff 00 e0 00      00:01:08.700  SET FEATURES [Set transfer mode]
  c6 ff 10 ff ff 00 e0 00      00:01:08.700  SET MULTIPLE MODE
  10 ff 00 4f 25 c2 e0 00      00:01:08.700  RECALIBRATE [OBS-4]

Error 2 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 41 84 1c e0  Error: IDNF at LBA = 0x001c8441 = 1868865

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  24 ff 01 41 84 1c e0 00      00:01:08.500  READ SECTOR(S) EXT
  25 ff 01 41 84 1c e0 00      00:01:08.400  READ DMA EXT
  25 ff 08 00 08 c0 e0 00      00:01:08.400  READ DMA EXT
  25 ff 08 c0 39 83 e0 00      00:01:08.400  READ DMA EXT
  25 ff 29 97 39 83 e0 00      00:01:08.400  READ DMA EXT

Error 1 occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 01 41 84 1c e0  Error: IDNF 1 sectors at LBA = 0x001c8441 = 1868865

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 ff 01 41 84 1c e0 00      00:01:08.400  READ DMA EXT
  25 ff 08 00 08 c0 e0 00      00:01:08.400  READ DMA EXT
  25 ff 08 c0 39 83 e0 00      00:01:08.400  READ DMA EXT
  25 ff 29 97 39 83 e0 00      00:01:08.400  READ DMA EXT
  25 ff 53 44 39 83 e0 00      00:01:08.400  READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


J'y trouve :
193 Load_Cycle_Count        0x0012   075   075   000    Old_age   Always       -       256918
  9 Power_On_Hours          0x0012   088   088   000    Old_age   Always       -       5312
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       897

Le nombre de parcage à l'heure est le rapport LCC/POH=48 Il est dit dans cette doc qu'il ne doit pas dépasser 30.

Faut il que je m'inquiète ou pas ? Merci de me dire quoi smile

@+


<titia> pas assez cuit
<titia> µonde  -> explosion
<captnfab> ^^
<captnfab> s/µ/bl/ wink

Hors ligne

#2 11-09-2011 08:52:50

Invité-5
Banni(e)

Re : données smart

À mon humble avis un petit "tchip-tchap" ne doit pas t'inquièter autant que ça  smile  Trop d'info tue l'info  cool  et le test peut s'avérer pas tout à fait fiable wink

Il est dit dans cette doc qu'il ne doit pas dépasser 30.


laptop_mode.txt · Dernière modification: Le 27/08/2010, 12:29 par YannUbuntu

Mon DD a exactement 5 ans (exclusivement sous Debian) pour comparer donc :

root@debian:/home/ddd# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-1-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE16 Serial ATA
Device Model:     WDC WD3200KS-75PFB0
Serial Number:    WD-WCAPD2835622
Firmware Version: 21.00M21
User Capacity:    320 072 933 376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Sep 11 09:23:32 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
          was suspended by an interrupting command from host.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    ( 9600) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    ( 111) minutes.
Conveyance self-test routine
recommended polling time:    (   6) minutes.
SCT capabilities:          (0x103f) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   186   183   021    Pre-fail  Always       -       5658
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3648
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000e   100   253   051    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       17483
 10 Spin_Retry_Count        0x0012   100   100   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3308
194 Temperature_Celsius     0x0022   112   001   000    Old_age   Always       -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short captive       Completed without error       00%     13864         -
# 2  Short offline       Completed without error       00%     12625         -
# 3  Short offline       Completed without error       00%      2847         -
# 4  Short captive       Completed without error       00%      2843         -
# 5  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


D'autres avis ?

#3 11-09-2011 12:56:45

Lætitia
Modette
Lieu : Normandie du Nord
Distrib. : Stretch
Noyau : 4.6.0-1-amd64
(G)UI : Xfce4
Inscription : 14-04-2010
Site Web

Re : données smart

salut,
le petit bruit m'a juste conduite à vérifier ces données. Je m'inquiète un peu, c'est dans ma nature. neutral
L'est pas dégueu ton dd, tu fais dans le caviar. tongue C'est marrant, chez toi, on ne trouve pas la valeur de Load_Cycle_Count (ID#193). En connais tu la raison ? Du coup, on ne peut pas faire le fameux rapport LCC/POH.

Je suis comme toi, j'aimerais avoir d'autres avis pour voir la moyenne qu'on peut en tirer. Je suis fan de statistiques et très curieuse. big_smile

Merci bien, @+

<titia> pas assez cuit
<titia> µonde  -> explosion
<captnfab> ^^
<captnfab> s/µ/bl/ wink

Hors ligne

#4 11-09-2011 13:41:24

bract
Modérateur
Lieu : Pays du kiwi
Distrib. : wheezy
Noyau : 3.2.0-3 amd64
(G)UI : gnome 3.4.2 + lxde(eeepc)
Inscription : 05-02-2011

Re : données smart

Bonjour à vous smile
Allez pour les stats de Lætitia:

mon disque principal (contenant: /, swap, et /home) qui a 3ans et demi

# smartctl -a /dev/sdb
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     SAMSUNG HD161HJ
Serial Number:    S0V3JDQQ203540
Firmware Version: JF100-19
User Capacity:    160 041 885 696 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 3b
Local Time is:    Sun Sep 11 14:29:29 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
          was completed without error.
          Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:     (2929) seconds.
Offline data collection
capabilities:        (0x5b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          No Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   2) minutes.
Extended self-test routine
recommended polling time:    (  49) minutes.
SCT capabilities:          (0x003f) SCT Status supported.
          SCT Error Recovery Control supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   253   253   025    Pre-fail  Always       -       4544
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2555
  5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0025   253   253   015    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       9570
 10 Spin_Retry_Count        0x0033   253   253   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0012   253   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1762
 13 Read_Soft_Error_Rate    0x000e   100   100   000    Old_age   Always       -       11140038
184 End-to-End_Error        0x0033   253   253   099    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   253   253   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   253   253   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   133   118   000    Old_age   Always       -       35 (Lifetime Min/Max 7/40)
194 Temperature_Celsius     0x0022   130   115   000    Old_age   Always       -       36 (Lifetime Min/Max 7/41)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       11140038
196 Reallocated_Event_Count 0x0032   253   253   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   253   253   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   100   100   000    Old_age   Always       -       0
202 Data_Address_Mark_Errs  0x0032   253   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


mon disque de sauvegarde bien plus vieux et dans la même tour:

# smartctl -a /dev/sda
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K80
Device Model:     HDS728080PLAT20
Serial Number:    PFD255S7SMPE5K
Firmware Version: PF2OA2AA
User Capacity:    82 347 195 904 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Sun Sep 11 14:28:20 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
          was never started.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:     (1828) seconds.
Offline data collection
capabilities:        (0x5b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          No Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    (  31) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   158   158   050    Pre-fail  Offline      -       213
  3 Spin_Up_Time            0x0007   107   107   024    Pre-fail  Always       -       187 (Average 185)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       2656
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   136   136   020    Pre-fail  Offline      -       31
  9 Power_On_Hours          0x0012   097   097   000    Old_age   Always       -       23668
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2653
192 Power-Off_Retract_Count 0x0032   097   097   050    Old_age   Always       -       3792
193 Load_Cycle_Count        0x0012   097   097   050    Old_age   Always       -       3792
194 Temperature_Celsius     0x0002   137   137   000    Old_age   Always       -       40 (Lifetime Min/Max 12/54)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       1977

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     10908         -

Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


A bientôt pour le rapport lol


L'asso est lancée. cool
La connaissance s'acquiert par l'expérience, tout le reste n'est que de l'information.[Albert Einstein]

Hors ligne

#5 11-09-2011 17:10:31

zoroastre74
Membre
Distrib. : Debian Wheezy
Noyau : Linux 3.2
(G)UI : Awesome wm v3.4.13 (Octopus)
Inscription : 28-08-2010

Re : données smart

Yep!

Sur mon portable, j'avais le bug du parquage 'à tout va' de la tête de mon disque dur.

J'ai donc écrit un petit script pour contrôler régulièrement ces informations.

Le resultat :

mercredi 19 août 2009, 00:33:20 (UTC+0200)
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       371119
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       225
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       56
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30518
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30518
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       371121
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       225
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       56
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30523
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30523
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       371123
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       225
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       56
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30526
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30526
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       371123
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       225
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       56
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30526
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30526
mercredi 19 août 2009, 00:36:53 (UTC+0200)
mercredi 19 août 2009, 00:41:01 (UTC+0200)
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       371133
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       225
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       56
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30547
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       30547
vendredi 6 novembre 2009, 17:36:13 (UTC+0100)
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       565129
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       277
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       70
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       31938
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       31938
samedi 15 mai 2010, 03:57:37 (UTC+0200)
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       980916
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       456
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       104
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       32788
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       32788
vendredi 25 mars 2011, 20:46:57 (UTC+0100)
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       1472344
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1104
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       237
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       35866
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       35866
lundi 25 avril 2011, 21:13:50 (UTC+0200)
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       1529646
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1161
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       238
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       35897
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       35897
dimanche 11 septembre 2011, 17:40:45 (UTC+0200)
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       1774399
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1381
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       248
193 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       36027
225 Load_Cycle_Count        0x0012   097   097   000    Old_age   Always       -       36027


Device Model:     SAMSUNG HM120IC


Mon rapport LCC/POH est de 0,0203.

Il faut également remarqué que mon disque dur a une durée de vie estimée à 98%, il est donc plutôt en bonne santé : -2% en 2 ans.

Cher Laetitia, Il serait plutôt interessant de comparer tes valeurs avec des pocesseurs de disque Hitachi.
Cependant, il faut comprendre que ces valeurs sont estimatives, elles donnent une idée, rien d'empirique en définitive.

Pour en revenir à tes inqiétudes, elles sont peut être justifées. Même si le ratio n'est pas catastrophique, tu as cette valeur de 88, valeur d'usure.

9 Power_On_Hours          0x0012   088   088   000    Old_age   Always       -       5312


En 26 mois, soit 2 ans, ton disque a perdu 12 % de vitalité. Le parquage est une des raisons d'usure de la mécanique.

Nous avions exploré cette voie ici : http://debian-facile.org/forum/viewtopic.php?id=3521

C'est un pc portable ???

@+

Zoroastre.

Dernière modification par zoroastre74 (11-09-2011 17:12:47)

Hors ligne

#6 11-09-2011 20:02:54

Lætitia
Modette
Lieu : Normandie du Nord
Distrib. : Stretch
Noyau : 4.6.0-1-amd64
(G)UI : Xfce4
Inscription : 14-04-2010
Site Web

Re : données smart

salut,
c'est bien un portable. 88 pour la valeur d'usure et 75 pour le parcage. J'en ai mangé 25 %.
J'ai compris (en gros) que sur un PC de bureau, le parcage était faible.

Retour de "hdparm -I /dev/sda"

/dev/sda:

ATA device, with non-removable media
  Model Number:       Hitachi HTS543225L9A300                
  Serial Number:      090314FB2D00LJGR4AEB
  Firmware Revision:  FBEOC40C
  Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
  Used: ATA-8-ACS revision 3f
  Supported: 8 7 6 5
Configuration:
  Logical   max current
  cylinders 16383 16383
  heads   16  16
  sectors/track 63  63
  --
  CHS current addressable sectors:   16514064
  LBA    user addressable sectors:  268435455
  LBA48  user addressable sectors:  488397168
  Logical/Physical Sector size:           512 bytes
  device size with M = 1024*1024:      238475 MBytes
  device size with M = 1000*1000:      250059 MBytes (250 GB)
  cache/buffer size  = 7114 KBytes (type=DualPortCache)
  Nominal Media Rotation Rate: 5400
Capabilities:
  LBA, IORDY(can be disabled)
  Queue depth: 32
  Standby timer values: spec'd by Vendor, no device specific minimum
  R/W multiple sector transfer: Max = 16  Current = 16
  Advanced power management level: 254
  Recommended acoustic management value: 128, current value: 254
  DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
       Cycle time: min=120ns recommended=120ns
  PIO: pio0 pio1 pio2 pio3 pio4
       Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
  Enabled Supported:
     *  SMART feature set
        Security Mode feature set
     *  Power Management feature set
     *  Write cache
     *  Look-ahead
     *  Host Protected Area feature set
     *  WRITE_BUFFER command
     *  READ_BUFFER command
     *  NOP cmd
     *  DOWNLOAD_MICROCODE
     *  Advanced Power Management feature set
        Power-Up In Standby feature set
     *  SET_FEATURES required to spinup after power up
        SET_MAX security extension
        Automatic Acoustic Management feature set
     *  48-bit Address feature set
     *  Device Configuration Overlay feature set
     *  Mandatory FLUSH_CACHE
     *  FLUSH_CACHE_EXT
     *  SMART error logging
     *  SMART self-test
     *  General Purpose Logging feature set
     *  WRITE_{DMA|MULTIPLE}_FUA_EXT
     *  64-bit World wide name
     *  IDLE_IMMEDIATE with UNLOAD
     *  WRITE_UNCORRECTABLE_EXT command
     *  Segmented DOWNLOAD_MICROCODE
     *  Gen1 signaling speed (1.5Gb/s)
     *  Gen2 signaling speed (3.0Gb/s)
     *  Native Command Queueing (NCQ)
     *  Host-initiated interface power management
     *  Phy event counters
     *  NCQ priority information
        Non-Zero buffer offsets in DMA Setup FIS
     *  DMA Setup Auto-Activate optimization
        Device-initiated interface power management
        In-order data delivery
     *  Software settings preservation
     *  SMART Command Transport (SCT) feature set
     *  SCT LBA Segment Access (AC2)
     *  SCT Error Recovery Control (AC3)
     *  SCT Features Control (AC4)
     *  SCT Data Tables (AC5)
Security:
  Master password revision code = 65534
    supported
  not enabled
  not locked
    frozen
  not expired: security count
    supported: enhanced erase
  100min for SECURITY ERASE UNIT. 102min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000cca55eca1071
  NAA   : 5
  IEEE OUI  : 000cca
  Unique ID : 55eca1071
Checksum: correct


Advanced power management level: 254. La valeur est donc correcte.

J'ai donc installé laptop-mode-tools Dans "/etc/laptop-mode/laptop-mode.conf", est il recommandé de changer les valeurs comme suit :

LM_AC_HD_IDLE_TIMEOUT_SECONDS=1200
LM_BATT_HD_IDLE_TIMEOUT_SECONDS=1200
NOLM_HD_IDLE_TIMEOUT_SECONDS=1200


"/etc/laptop-mode/laptop-mode.conf" en entier se trouve ici.
EDIT nouvelle version

Je n'ai pas vérifié depuis longtemps. Mais, avant d'installer Squeeze, la valeur LCC/POH était inférieure à 30 sous Ubuntu, il y a peut-être 1 an 1 an 1/2, je ne sais plus.

Demain, je regarderai sur les portables de la maison. Enfin, si j'ai le temps, pas sûr. sad

En tout cas merci beaucoup pour votre coopération messieurs. Vous êtes bien urbains. smile

@+

------------------------------------------------------
EDIT du 31 mars 2012

193 Load_Cycle_Count        0x0012   075   075   000    Old_age   Always       -       258994
  9 Power_On_Hours          0x0012   086   086   000    Old_age   Always       -       6530
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1099

LCC/POH=39.66, ça baisse donc. Je me dis que j'ai bien fait de zyeuter. Du coup, je me sers de ce fil comme carnet de bord. tongue

----------------------------------------
EDIT du 26 juin 2012

193 Load_Cycle_Count        0x0012   075   075   000    Old_age   Always       -       259222
9 Power_On_Hours          0x0012   084   084   000    Old_age   Always       -       7110
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1183

LCC/POH=36.46. Ça baisse encore. smile


------------------------------------------------
EDIT du 13 octobre 2012

193 Load_Cycle_Count        0x0012   075   075   000    Old_age   Always       -       259497
9 Power_On_Hours          0x0012   083   083   000    Old_age   Always       -       7839
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1289

LCC/POH=33.10

----------------------------------------------
EDIT du 28 décembre 2012

193 Load_Cycle_Count        0x0012   075   075   000    Old_age   Always       -       259674
  9 Power_On_Hours          0x0012   081   081   000    Old_age   Always       -       8345
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1374

LCC/POH=31.11

---------------------------------------------
EDIT du 31 mars 2013

193 Load_Cycle_Count        0x0012   075   075   000    Old_age   Always       -       259897
   9 Power_On_Hours          0x0012   080   080   000    Old_age   Always       -       8981
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1479

LCC/POH=28.94

---------------------------------------------
EDIT du 22 octobre 2013

193 Load_Cycle_Count        0x0012   074   074   000    Old_age   Always       -       260424
   9 Power_On_Hours          0x0012   078   078   000    Old_age   Always       -       10035
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1681

LCC/POH=25.95

---------------------------------------------
EDIT du 29 décembre 2013

193 Load_Cycle_Count        0x0012   074   074   000    Old_age   Always       -       260654
   9 Power_On_Hours          0x0012   077   077   000    Old_age   Always       -       10470
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1751

LCC/POH=24.89

--------------------------------------------
EDIT du 24 mars 2014

193 Load_Cycle_Count        0x0012   074   074   000    Old_age   Always       -       260855
    9 Power_On_Hours          0x0012   075   075   000    Old_age   Always       -       10990
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1846

LCC/POH=23.74

-------------------------------------------
EDIT du 17 juillet 2014

193 Load_Cycle_Count        0x0012   074   074   000    Old_age   Always       -       261175
    9 Power_On_Hours          0x0012   074   074   000    Old_age   Always       -       11731
  12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1972

LCC/POH=22.26

-------------------------------------------
EDIT du 27 décembre 2014

193 Load_Cycle_Count        0x0012   074   074   000    Old_age   Always       -       261545
   9 Power_On_Hours          0x0012   071   071   000    Old_age   Always       -       12787
  12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       2132

LCC/POH=20.45


-------------------------------------------
EDIT du 20 mai 2015
193 Load_Cycle_Count        0x0012   074   074   000    Old_age   Always       -       261891
  9 Power_On_Hours          0x0012   069   069   000    Old_age   Always       -       13868
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       2264

LCC/POH=18.88

Dernière modification par Lætitia (31-03-2013 21:16:09)


<titia> pas assez cuit
<titia> µonde  -> explosion
<captnfab> ^^
<captnfab> s/µ/bl/ wink

Hors ligne

Pied de page des forums