logo Debian Debian Debian-France Debian-Facile Debian-fr.org Forum-Debian.fr Debian ? Communautés logo inclusivité

Debian-facile

Bienvenue sur Debian-Facile, site d'aide pour les nouveaux utilisateurs de Debian.

Vous n'êtes pas identifié(e).

#1 21-10-2012 17:38:52

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

[RESOLU] problème de démarrage

bonjour,
j'ai installé une wheezy sur une partition libre. une fois installée, dans le terminal de démarrage, j'ai fait un "aptitude install kde". l'installation s'est bien passée. impossible d'entrer dans kde. ai installé ensuite kdm. j'ai bien une fenêtre de démarrage, mais elle m'amène sur un écran noir. j'ai essayé de faire un aptitude install kde-full ensuite, mais cela ne donne rien. avez-vous une suggestion pour m'aider à déboucher dans kde ? merci ++

Dernière modification par jeanmarc1 (23-02-2013 11:24:53)


"Being is not doing"

Hors ligne

#2 21-10-2012 20:02:51

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

à noter que la commande startx ne fonctionne pas.

et ici le sources.list que j'ai utilisé pour installer kde :

 ## wheezy
 deb http://ftp.fr.debian.org/debian/ wheezy main contrib non-free
 deb-src http://ftp.fr.debian.org/debian/ wheezy main contrib non-free
 
 ## wheezy multimedia
 deb http://www.deb-multimedia.org wheezy main non-free
 deb-src http://www.deb-multimedia.org wheezy main non-free
 
 ## wheezy security
 deb http://security.debian.org/ wheezy/updates main contrib non-free
 deb-src http://security.debian.org/ wheezy/updates main contrib non-free
 
 ##squeeze updates
 deb http://ftp.fr.debian.org/debian/ squeeze-updates main contrib non-free
 deb-src http://ftp.fr.debian.org/debian/ squeeze-updates main contrib non-free

 ## squeeze
 deb http://ftp.fr.debian.org/debian/ squeeze main contrib non-free
 deb-src http://ftp.fr.debian.org/debian/ squeeze main contrib non-free


"Being is not doing"

Hors ligne

#3 23-10-2012 08:25:11

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

j'ai réinstallé une wheezy, suivie d'un kde-full + kdm. toujours idem. après avoir entré le nom d'utilisateur et mot de passe, j'arrive sur un écran noir. je peux voir tout de même le curseur et le déplacer. problème de carte graphique ? j'ai une nvidia quadro fx1500. j'ai installé xorg et xorg serveur, mais cela ne change rien.

"Being is not doing"

Hors ligne

#4 23-10-2012 14:24:34

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [RESOLU] problème de démarrage

C'est peut-être un problème de pilote ou de configuration de X.

Regarde de ce côté déjà : http://debian-facile.org/

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#5 23-10-2012 16:56:43

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

C'est peut-être un problème de pilote ou de configuration de X.
Regarde de ce côté déjà : http://debian-facile.org/



oui, merci pour ton conseil. j'étais dessus en ce moment. j'ai installé quelques paquets type nvidia-xconfig et xserver-xorg-video-nouveau. mais cela n'a rien donné. pour l'instant, je débouche sur une console terminal et impossible d'aller plus loin...


"Being is not doing"

Hors ligne

#6 23-10-2012 17:03:59

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [RESOLU] problème de démarrage

Et tu as exécuté

# nvidia-xconfig

et essayé de relancer X ?


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#7 23-10-2012 17:10:41

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

Et tu as exécuté

# nvidia-xconfig

et essayé de relancer X ?



oui, j'avais installé nvidia-xconfig, exécuté nvidia-xconfig, et fait un reboot pour relancer x. mais cela m'amenait vers un terminal. je n'ai plus accès à la fenêtre de kdm qui me demande un username et mot de passe.


"Being is not doing"

Hors ligne

#8 23-10-2012 17:14:58

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [RESOLU] problème de démarrage

et peux-tu montrer ton fichier xorg.conf ?

edit : il me semble que nvidia-xconfig s'utilise avec le pilote propriétaire nvidia.
dans ce cas, il faut blacklister nouveau et d'autres.

Dernière modification par paskal (23-10-2012 17:20:22)


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#9 23-10-2012 17:28:32

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

et peux-tu montrer ton fichier xorg.conf ?
edit : il me semble que nvidia-xconfig s'utilise avec le pilote propriétaire nvidia.
dans ce cas, il faut blacklister nouveau et d'autres.



voici le fichier xorg.conf :

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.48  (buildd@murphy)  Wed Sep 12 11:32:28 UTC 2012

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nouveau"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
 



habituellement, sous debian et ubuntu, j'utilise les drivers par défaut, mais jamais les drivers nvidia. cela suffit pour mon usage et fonctionne bien.


"Being is not doing"

Hors ligne

#10 23-10-2012 17:33:20

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [RESOLU] problème de démarrage

Et tu vois des erreurs dans /var/log/Xorg.0.log ?

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#11 23-10-2012 17:41:04

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [RESOLU] problème de démarrage

jeanmarc1 a écrit :

habituellement, sous debian et ubuntu, j'utilise les drivers par défaut, mais jamais les drivers nvidia. cela suffit pour mon usage et fonctionne bien.


Avec cette carte ?
Il me semble qu'il peut y avoir des soucis : http://forums.debian.net/viewtopic.php?f=6&t=73633


I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#12 24-10-2012 06:10:52

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

Et tu vois des erreurs dans /var/log/Xorg.0.log ?



ce matin, j'ai refait au aptitude install nvidia-kerne-ldkms nvidia-settings nvidia-xconfig.
j'arrive avec un fichier xorg.conf comme ceci :

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.48  (buildd@murphy)  Wed Sep 12 11:32:28 UTC 2012


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
 



c'est la formule la moins mauvaise, avec "nvidia" noté dans la section Device. j'arrive sur la fenêtre kdm d'entrée avec username et mot de passe. quand j'entre, j'arrive sur le même fond d'écran que la fenêtre, avec un curseur actif. mais on n'entre pas dans le système. si je mets "nouveau" dans la section device/driver, j'arrive sur un terminal et non sur la fenêtre graphique.

voici le fichier var/log/Xorg.O.log :

[     4.861]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[     4.861] X Protocol Version 11, Revision 0
[     4.861] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[     4.861] Current Operating System: Linux wheezy-kde 3.2.0-3-686-pae #1 SMP Mon Jul 23 03:50:34 UTC 2012 i686
[     4.861] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-3-686-pae root=UUID=209fbb05-2260-48dc-abdb-23662a51ab1f ro quiet
[     4.861] Build Date: 30 September 2012  12:36:23PM
[     4.861] xorg-server 2:1.12.4-1 (Julien Cristau <jcristau@debian.org>)
[     4.861] Current version of pixman: 0.26.0
[     4.861]  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
[     4.861] Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.861] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 24 07:02:34 2012
[     4.862] (==) Using config file: "/etc/X11/xorg.conf"
[     4.862] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.864] (==) ServerLayout "Layout0"
[     4.864] (**) |-->Screen "Screen0" (0)
[     4.864] (**) |   |-->Monitor "Monitor0"
[     4.865] (**) |   |-->Device "Device0"
[     4.865] (**) |-->Input Device "Keyboard0"
[     4.865] (**) |-->Input Device "Mouse0"
[     4.865] (==) Automatically adding devices
[     4.865] (==) Automatically enabling devices
[     4.867] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.867]  Entry deleted from font path.
[     4.873] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[     4.873]  Entry deleted from font path.
[     4.873] (==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  built-ins
[     4.873] (==) ModulePath set to "/usr/lib/xorg/modules"
[     4.873] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     4.873] (WW) Disabling Keyboard0
[     4.873] (WW) Disabling Mouse0
[     4.873] (II) Loader magic: 0xb77665a0
[     4.873] (II) Module ABI versions:
[     4.873]  X.Org ANSI C Emulation: 0.4
[     4.873]  X.Org Video Driver: 12.1
[     4.873]  X.Org XInput driver : 16.0
[     4.873]  X.Org Server Extension : 6.0
[     4.874] (--) PCI:*(0:1:0:0) 10de:029b:1028:019b rev 161, Mem @ 0xed000000/16777216, 0xd0000000/268435456, 0xee000000/16777216, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[     4.874] (II) Open ACPI successful (/var/run/acpid.socket)
[     4.874] (II) LoadModule: "extmod"
[     4.882] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[     4.884] (II) Module extmod: vendor="X.Org Foundation"
[     4.884]  compiled for 1.12.4, module version = 1.0.0
[     4.884]  Module class: X.Org Server Extension
[     4.884]  ABI class: X.Org Server Extension, version 6.0
[     4.884] (II) Loading extension SELinux
[     4.884] (II) Loading extension MIT-SCREEN-SAVER
[     4.884] (II) Loading extension XFree86-VidModeExtension
[     4.884] (II) Loading extension XFree86-DGA
[     4.884] (II) Loading extension DPMS
[     4.884] (II) Loading extension XVideo
[     4.884] (II) Loading extension XVideo-MotionCompensation
[     4.884] (II) Loading extension X-Resource
[     4.884] (II) LoadModule: "dbe"
[     4.885] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[     4.885] (II) Module dbe: vendor="X.Org Foundation"
[     4.885]  compiled for 1.12.4, module version = 1.0.0
[     4.885]  Module class: X.Org Server Extension
[     4.885]  ABI class: X.Org Server Extension, version 6.0
[     4.885] (II) Loading extension DOUBLE-BUFFER
[     4.886] (II) LoadModule: "glx"
[     4.886] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[     5.196] (II) Module glx: vendor="NVIDIA Corporation"
[     5.196]  compiled for 4.0.2, module version = 1.0.0
[     5.196]  Module class: X.Org Server Extension
[     5.197] (II) NVIDIA GLX Module  304.48  Sun Sep  9 20:43:45 PDT 2012
[     5.197] (II) Loading extension GLX
[     5.197] (II) LoadModule: "record"
[     5.197] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[     5.198] (II) Module record: vendor="X.Org Foundation"
[     5.198]  compiled for 1.12.4, module version = 1.13.0
[     5.198]  Module class: X.Org Server Extension
[     5.198]  ABI class: X.Org Server Extension, version 6.0
[     5.198] (II) Loading extension RECORD
[     5.198] (II) LoadModule: "dri"
[     5.199] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[     5.201] (II) Module dri: vendor="X.Org Foundation"
[     5.201]  compiled for 1.12.4, module version = 1.0.0
[     5.201]  ABI class: X.Org Server Extension, version 6.0
[     5.201] (II) Loading extension XFree86-DRI
[     5.201] (II) LoadModule: "dri2"
[     5.201] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     5.202] (II) Module dri2: vendor="X.Org Foundation"
[     5.202]  compiled for 1.12.4, module version = 1.2.0
[     5.202]  ABI class: X.Org Server Extension, version 6.0
[     5.202] (II) Loading extension DRI2
[     5.202] (II) LoadModule: "nvidia"
[     5.203] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     5.215] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.215]  compiled for 4.0.2, module version = 1.0.0
[     5.215]  Module class: X.Org Video Driver
[     5.220] (II) NVIDIA dlloader X Driver  304.48  Sun Sep  9 20:24:04 PDT 2012
[     5.220] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.221] (++) using VT number 7

[     5.236] (II) Loading sub module "fb"
[     5.236] (II) LoadModule: "fb"
[     5.236] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.238] (II) Module fb: vendor="X.Org Foundation"
[     5.238]  compiled for 1.12.4, module version = 1.0.0
[     5.238]  ABI class: X.Org ANSI C Emulation, version 0.4
[     5.238] (II) Loading sub module "wfb"
[     5.238] (II) LoadModule: "wfb"
[     5.239] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.241] (II) Module wfb: vendor="X.Org Foundation"
[     5.241]  compiled for 1.12.4, module version = 1.0.0
[     5.241]  ABI class: X.Org ANSI C Emulation, version 0.4
[     5.241] (II) Loading sub module "ramdac"
[     5.241] (II) LoadModule: "ramdac"
[     5.241] (II) Module "ramdac" already built-in
[     5.245] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     5.245] (==) NVIDIA(0): RGB weight 888
[     5.245] (==) NVIDIA(0): Default visual is TrueColor
[     5.245] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.246] (**) NVIDIA(0): Enabling 2D acceleration
[     7.326] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[     7.326] (II) NVIDIA(GPU-0):     Vision stereo.
[     7.329] (II) NVIDIA(0): NVIDIA GPU Quadro FX 1500M (G71GL) at PCI:1:0:0 (GPU-0)
[     7.329] (--) NVIDIA(0): Memory: 262144 kBytes
[     7.329] (--) NVIDIA(0): VideoBIOS: 05.71.22.16.15
[     7.329] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.329] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[     7.329] (--) NVIDIA(0): Valid display device(s) on Quadro FX 1500M at PCI:1:0:0
[     7.329] (--) NVIDIA(0):     CRT-0
[     7.329] (--) NVIDIA(0):     TV-0
[     7.329] (--) NVIDIA(0):     Seiko/Epson (DFP-0) (connected)
[     7.329] (--) NVIDIA(0):     DFP-1
[     7.329] (--) NVIDIA(0):     DFP-2
[     7.329] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[     7.329] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[     7.329] (--) NVIDIA(0): TV encoder: (null)
[     7.329] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[     7.329] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[     7.329] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[     7.329] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[     7.329] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[     7.329] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[     7.329] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.329] (**) NVIDIA(0):     device Seiko/Epson (DFP-0) (Using EDID frequencies has
[     7.329] (**) NVIDIA(0):     been enabled on all display devices.)
[     7.329] (==) NVIDIA(0):
[     7.329] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     7.329] (==) NVIDIA(0):     will be used as the requested mode.
[     7.329] (==) NVIDIA(0):
[     7.330] (II) NVIDIA(0): Validated MetaModes:
[     7.330] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[     7.330] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
[     7.330] (WW) NVIDIA(0): Unable to support custom viewPortOut 1920 x 1080 +0 +60
[     7.330] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
[     7.331] (WW) NVIDIA(0): Unable to support custom viewPortOut 1500 x 1200 +210 +0
[     7.331] (WW) NVIDIA(0): Unable to support custom viewPortOut 1920 x 1080 +0 +60
[     7.331] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
[     7.332] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
[     7.332] (WW) NVIDIA(0): Unable to support custom viewPortOut 1600 x 1200 +160 +0
[     7.332] (--) NVIDIA(0): DPI set to (131, 132); computed from "UseEdidDpi" X config
[     7.332] (--) NVIDIA(0):     option
[     7.332] (WW) NVIDIA(0): UBB is incompatible with the Composite extension.  Disabling
[     7.332] (WW) NVIDIA(0):     UBB.
[     7.332] (--) Depth 24 pixmap format is 32 bpp
[     7.349] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[     8.749] (II) Loading extension NV-GLX
[     8.779] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.779] (==) NVIDIA(0): Backing store disabled
[     8.779] (==) NVIDIA(0): Silken mouse enabled
[     8.779] (**) NVIDIA(0): DPMS enabled
[     8.779] (II) Loading extension NV-CONTROL
[     8.779] (II) Loading extension XINERAMA
[     8.779] (II) Loading sub module "dri2"
[     8.779] (II) LoadModule: "dri2"
[     8.780] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     8.780] (II) Module dri2: vendor="X.Org Foundation"
[     8.780]  compiled for 1.12.4, module version = 1.2.0
[     8.780]  ABI class: X.Org Server Extension, version 6.0
[     8.780] (II) NVIDIA(0): [DRI2] Setup complete
[     8.780] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     8.780] (--) RandR disabled
[     8.780] (II) Initializing built-in extension Generic Event Extension
[     8.780] (II) Initializing built-in extension SHAPE
[     8.780] (II) Initializing built-in extension MIT-SHM
[     8.780] (II) Initializing built-in extension XInputExtension
[     8.780] (II) Initializing built-in extension XTEST
[     8.780] (II) Initializing built-in extension BIG-REQUESTS
[     8.780] (II) Initializing built-in extension SYNC
[     8.780] (II) Initializing built-in extension XKEYBOARD
[     8.780] (II) Initializing built-in extension XC-MISC
[     8.780] (II) Initializing built-in extension SECURITY
[     8.780] (II) Initializing built-in extension XINERAMA
[     8.780] (II) Initializing built-in extension XFIXES
[     8.780] (II) Initializing built-in extension RENDER
[     8.780] (II) Initializing built-in extension RANDR
[     8.780] (II) Initializing built-in extension COMPOSITE
[     8.780] (II) Initializing built-in extension DAMAGE
[     8.780] (II) SELinux: Disabled on system
[     8.784] (II) Initializing extension GLX
[     8.883] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     8.883] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.883] (II) LoadModule: "evdev"
[     8.884] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.885] (II) Module evdev: vendor="X.Org Foundation"
[     8.885]  compiled for 1.12.1, module version = 2.7.0
[     8.885]  Module class: X.Org XInput Driver
[     8.885]  ABI class: X.Org XInput driver, version 16.0
[     8.885] (II) Using input driver 'evdev' for 'Video Bus'
[     8.885] (**) Video Bus: always reports core events
[     8.885] (**) evdev: Video Bus: Device: "/dev/input/event5"
[     8.885] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.885] (--) evdev: Video Bus: Found keys
[     8.885] (II) evdev: Video Bus: Configuring as keyboard
[     8.885] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2b/LNXVIDEO:00/input/input5/event5"
[     8.885] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[     8.885] (**) Option "xkb_rules" "evdev"
[     8.885] (**) Option "xkb_model" "pc105"
[     8.885] (**) Option "xkb_layout" "fr"
[     8.885] (**) Option "xkb_variant" "latin9"
[     8.918] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     8.918] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.918] (II) Using input driver 'evdev' for 'Power Button'
[     8.918] (**) Power Button: always reports core events
[     8.918] (**) evdev: Power Button: Device: "/dev/input/event2"
[     8.918] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.918] (--) evdev: Power Button: Found keys
[     8.918] (II) evdev: Power Button: Configuring as keyboard
[     8.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[     8.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     8.918] (**) Option "xkb_rules" "evdev"
[     8.918] (**) Option "xkb_model" "pc105"
[     8.918] (**) Option "xkb_layout" "fr"
[     8.918] (**) Option "xkb_variant" "latin9"
[     8.919] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     8.919] (II) No input driver specified, ignoring this device.
[     8.919] (II) This device may have been added with another device file.
[     8.919] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[     8.919] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     8.919] (II) Using input driver 'evdev' for 'Sleep Button'
[     8.919] (**) Sleep Button: always reports core events
[     8.919] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[     8.919] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     8.919] (--) evdev: Sleep Button: Found keys
[     8.919] (II) evdev: Sleep Button: Configuring as keyboard
[     8.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[     8.919] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     8.919] (**) Option "xkb_rules" "evdev"
[     8.919] (**) Option "xkb_model" "pc105"
[     8.919] (**) Option "xkb_layout" "fr"
[     8.919] (**) Option "xkb_variant" "latin9"
[     8.920] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[     8.920] (II) No input driver specified, ignoring this device.
[     8.920] (II) This device may have been added with another device file.
[     8.920] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[     8.920] (II) No input driver specified, ignoring this device.
[     8.920] (II) This device may have been added with another device file.
[     8.921] (II) config/udev: Adding input device Cypress-Weikeng USB Adapter (/dev/input/event7)
[     8.921] (**) Cypress-Weikeng USB Adapter: Applying InputClass "evdev keyboard catchall"
[     8.921] (II) Using input driver 'evdev' for 'Cypress-Weikeng USB Adapter'
[     8.921] (**) Cypress-Weikeng USB Adapter: always reports core events
[     8.921] (**) evdev: Cypress-Weikeng USB Adapter: Device: "/dev/input/event7"
[     8.921] (--) evdev: Cypress-Weikeng USB Adapter: Vendor 0x6f2 Product 0x11
[     8.921] (--) evdev: Cypress-Weikeng USB Adapter: Found keys
[     8.921] (II) evdev: Cypress-Weikeng USB Adapter: Configuring as keyboard
[     8.921] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7/event7"
[     8.921] (II) XINPUT: Adding extended input device "Cypress-Weikeng USB Adapter" (type: KEYBOARD, id 9)
[     8.921] (**) Option "xkb_rules" "evdev"
[     8.921] (**) Option "xkb_model" "pc105"
[     8.921] (**) Option "xkb_layout" "fr"
[     8.921] (**) Option "xkb_variant" "latin9"
[     8.921] (II) config/udev: Adding input device Cypress-Weikeng USB Adapter (/dev/input/event10)
[     8.921] (**) Cypress-Weikeng USB Adapter: Applying InputClass "evdev pointer catchall"
[     8.921] (**) Cypress-Weikeng USB Adapter: Applying InputClass "evdev keyboard catchall"
[     8.922] (II) Using input driver 'evdev' for 'Cypress-Weikeng USB Adapter'
[     8.922] (**) Cypress-Weikeng USB Adapter: always reports core events
[     8.922] (**) evdev: Cypress-Weikeng USB Adapter: Device: "/dev/input/event10"
[     8.922] (--) evdev: Cypress-Weikeng USB Adapter: Vendor 0x6f2 Product 0x11
[     8.922] (--) evdev: Cypress-Weikeng USB Adapter: Found 3 mouse buttons
[     8.922] (--) evdev: Cypress-Weikeng USB Adapter: Found scroll wheel(s)
[     8.922] (--) evdev: Cypress-Weikeng USB Adapter: Found relative axes
[     8.922] (--) evdev: Cypress-Weikeng USB Adapter: Found x and y relative axes
[     8.922] (--) evdev: Cypress-Weikeng USB Adapter: Found absolute axes
[     8.922] (II) evdev: Cypress-Weikeng USB Adapter: Forcing absolute x/y axes to exist.
[     8.922] (--) evdev: Cypress-Weikeng USB Adapter: Found keys
[     8.922] (II) evdev: Cypress-Weikeng USB Adapter: Configuring as mouse
[     8.922] (II) evdev: Cypress-Weikeng USB Adapter: Configuring as keyboard
[     8.922] (II) evdev: Cypress-Weikeng USB Adapter: Adding scrollwheel support
[     8.922] (**) evdev: Cypress-Weikeng USB Adapter: YAxisMapping: buttons 4 and 5
[     8.922] (**) evdev: Cypress-Weikeng USB Adapter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.922] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input10/event10"
[     8.922] (II) XINPUT: Adding extended input device "Cypress-Weikeng USB Adapter" (type: KEYBOARD, id 10)
[     8.922] (**) Option "xkb_rules" "evdev"
[     8.922] (**) Option "xkb_model" "pc105"
[     8.922] (**) Option "xkb_layout" "fr"
[     8.922] (**) Option "xkb_variant" "latin9"
[     8.922] (II) evdev: Cypress-Weikeng USB Adapter: initialized for relative axes.
[     8.922] (WW) evdev: Cypress-Weikeng USB Adapter: ignoring absolute axes.
[     8.922] (**) Cypress-Weikeng USB Adapter: (accel) keeping acceleration scheme 1
[     8.922] (**) Cypress-Weikeng USB Adapter: (accel) acceleration profile 0
[     8.922] (**) Cypress-Weikeng USB Adapter: (accel) acceleration factor: 2.000
[     8.922] (**) Cypress-Weikeng USB Adapter: (accel) acceleration threshold: 4
[     8.923] (II) config/udev: Adding input device Cypress-Weikeng USB Adapter (/dev/input/mouse0)
[     8.923] (II) No input driver specified, ignoring this device.
[     8.923] (II) This device may have been added with another device file.
[     8.923] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     8.923] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.923] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     8.923] (**) AT Translated Set 2 keyboard: always reports core events
[     8.923] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     8.923] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     8.923] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     8.923] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     8.923] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     8.923] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     8.923] (**) Option "xkb_rules" "evdev"
[     8.923] (**) Option "xkb_model" "pc105"
[     8.923] (**) Option "xkb_layout" "fr"
[     8.923] (**) Option "xkb_variant" "latin9"
[     8.924] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[     8.924] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     8.924] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     8.924] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     8.924] (II) LoadModule: "synaptics"
[     8.924] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     8.926] (II) Module synaptics: vendor="X.Org Foundation"
[     8.926]  compiled for 1.12.4, module version = 1.6.2
[     8.926]  Module class: X.Org XInput Driver
[     8.926]  ABI class: X.Org XInput driver, version 16.0
[     8.926] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     8.926] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     8.926] (**) Option "Device" "/dev/input/event11"
[     8.960] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[     8.960] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[     8.960] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     8.960] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     8.960] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
[     8.960] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     8.960] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     8.960] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     8.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[     8.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[     8.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     8.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[     8.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[     8.968] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     8.968] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     8.968] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     8.968] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     8.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     8.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[     8.969] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     8.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[     8.970] (II) No input driver specified, ignoring this device.
[     8.970] (II) This device may have been added with another device file.
[     8.971] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[     8.971] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.971] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[     8.971] (**) Dell WMI hotkeys: always reports core events
[     8.971] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event6"
[     8.971] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[     8.971] (--) evdev: Dell WMI hotkeys: Found keys
[     8.971] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[     8.971] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[     8.971] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 13)
[     8.971] (**) Option "xkb_rules" "evdev"
[     8.971] (**) Option "xkb_model" "pc105"
[     8.971] (**) Option "xkb_layout" "fr"
[     8.971] (**) Option "xkb_variant" "latin9"
[    62.856] (II) evdev: Video Bus: Close
[    62.856] (II) UnloadModule: "evdev"
[    62.872] (II) evdev: Power Button: Close
[    62.872] (II) UnloadModule: "evdev"
[    62.880] (II) evdev: Sleep Button: Close
[    62.880] (II) UnloadModule: "evdev"
[    62.888] (II) evdev: Cypress-Weikeng USB Adapter: Close
[    62.888] (II) UnloadModule: "evdev"
[    62.900] (II) evdev: Cypress-Weikeng USB Adapter: Close
[    62.900] (II) UnloadModule: "evdev"
[    62.912] (II) evdev: AT Translated Set 2 keyboard: Close
[    62.912] (II) UnloadModule: "evdev"
[    62.969] (II) UnloadModule: "synaptics"
[    62.969] (II) evdev: Dell WMI hotkeys: Close
[    62.969] (II) UnloadModule: "evdev"
[    63.062] Server terminated successfully (0). Closing log file.



peut-être que cette ligne est erronée :

7.330] (WW) NVIDIA(0): Unable to support custom viewPortOut


"Being is not doing"

Hors ligne

#13 24-10-2012 06:13:03

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

jeanmarc1 a écrit :

habituellement, sous debian et ubuntu, j'utilise les drivers par défaut, mais jamais les drivers nvidia. cela suffit pour mon usage et fonctionne bien.


Avec cette carte ?
Il me semble qu'il peut y avoir des soucis : http://forums.debian.net/viewtopic.php?f=6&t=73633



oui, j'utilise deux dell portable precision avec des quadro fx 1500 et 1600. en principe, pas de problème graphique dans ubuntu et debian, hormis parfois des difficultés à l'affichage sur l'écran externe via la station d'accueil.


"Being is not doing"

Hors ligne

#14 24-10-2012 06:32:25

smolski
quasi...modo
Lieu : AIN
Distrib. : backports (buster) 10
Noyau : Linux 4.19.0-8-amd64
(G)UI : gnome
Inscription : 21-10-2008

Re : [RESOLU] problème de démarrage

Le serveurX est bien stoppé à chacune de ces manips ?
http://debian-facile.org/#creation
roll

saque eud dun (patois chtimi : fonce dedans)

Hors ligne

#15 24-10-2012 06:37:52

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

smolski a écrit :

Le serveurX est bien stoppé à chacune de ces manips ?
http://debian-facile.org/#creation
roll



non, je ne le fais pas. je prends note. merci.


"Being is not doing"

Hors ligne

#16 24-10-2012 06:39:31

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

jeanmarc1 a écrit :

habituellement, sous debian et ubuntu, j'utilise les drivers par défaut, mais jamais les drivers nvidia. cela suffit pour mon usage et fonctionne bien.


Avec cette carte ?
Il me semble qu'il peut y avoir des soucis : http://forums.debian.net/viewtopic.php?f=6&t=73633



en lisant le lien que tu indiques, l'idée est venue de mettre un "nomodeset" dans le /etc/default/grub. plusieurs personnes le signalent. pour l'instant, pas réussi. quand je mets entre "" nomodeset ou quiet splash nomodeset, pendant le update-grub, j'ai un "not found" dans le fichier /usr/....grub.


"Being is not doing"

Hors ligne

#17 24-10-2012 07:49:13

smolski
quasi...modo
Lieu : AIN
Distrib. : backports (buster) 10
Noyau : Linux 4.19.0-8-amd64
(G)UI : gnome
Inscription : 21-10-2008

Re : [RESOLU] problème de démarrage

jeanmarc1,

quand je mets entre "" nomodeset ou quiet splash nomodeset, pendant le update-grub, j'ai un "not found" dans le fichier /usr/....grub.


Avec grub2 de squeeze, on n'écrit plus directement dans les fichiers mais on passe par des scripts !

Regarde ce tuto pour le faire :
http://debian-facile.org/doc:systeme:no … es-modules

C'est là que tu dois ajouter le nomodeset peut-être salvateur ? smile


saque eud dun (patois chtimi : fonce dedans)

Hors ligne

#18 24-10-2012 14:18:33

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

smolski a écrit :

jeanmarc1,

quand je mets entre "" nomodeset ou quiet splash nomodeset, pendant le update-grub, j'ai un "not found" dans le fichier /usr/....grub.


Avec grub2 de squeeze, on n'écrit plus directement dans les fichiers mais on passe par des scripts !
Regarde ce tuto pour le faire :
http://debian-facile.org/doc:systeme:no … es-modules
C'est là que tu dois ajouter le nomodeset peut-être salvateur ? smile



merci pour le tuto. dans la page indiquée, il est question de modifier le fichier grub, mais non de créer un script.

voici le fichier grub que j'ai :

GRUB_DEFAULT=2
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT= "nomodeset"
GRUB_CMDLINE_LINUX=""



quand je fais un udpate-grub, j'obtiens :

/usr/sbin/grub-mkconfig: 9 : /etc/default/grub
nomodeset : not found



il doit y avoir quelque chose qui m'échappe.

Dernière modification par jeanmarc1 (24-10-2012 14:19:26)


"Being is not doing"

Hors ligne

#19 24-10-2012 17:02:50

paskal
autobahn
Lieu : ailleurs
Inscription : 14-06-2011
Site Web

Re : [RESOLU] problème de démarrage

Je me demande si l'espace est permis entre le signe égal et "nomodeset" ?

I'd love to change the world
But I don't know what to do
So I'll leave it up to you...

logo-sur-fond.png

Hors ligne

#20 24-10-2012 17:09:00

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

Je me demande si l'espace est permis entre le signe égal et "nomodeset" ?



je le supprimerai pour voir. dans le grub, au démarrage, en me mettant sur la ligne du kernel souhaité, et en tapant la lettre "e", j'ai pu accéder à une édition du grub, et remplacer "quiet" par nomodeset. ensuite avec un ctrl X, j'ai fermé le grub et le système se lance. malgré cela, résultat idem. après avoir entré le username et mdp, je tombe sur un arrière plan fixe, curseur mobile, mais pas de système visible...


"Being is not doing"

Hors ligne

#21 25-10-2012 05:59:46

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

paskal a écrit :

Je me demande si l'espace est permis entre le signe égal et "nomodeset" ?



j'ai supprimé l'espace, mais cela ne change rien. probable que la commande nomodeset ne soit pas une solution ici.
je me demande si 1/ je ne devrais pas tenter d'installer en plus de kde gdm3, pour avoir un accès au système. j'aurai peut être les deux environnements dispo, bien que cela risque d'être un peu du cafouillage 2/ ou de réinstaller wheezy kde à partir d'un dvd complet, qui aura peut être des paquets supplémentaires, absents de l'image net que j'ai utilisée.


"Being is not doing"

Hors ligne

#22 25-10-2012 10:32:28

Thuban
aka prx
Distrib. : OpenBSD
Noyau : current
(G)UI : cwm
Inscription : 09-01-2009
Site Web

Re : [RESOLU] problème de démarrage

Si je comprend bien kdm démarrage, mais après avoir précisé login et mot de passe, c'est écran noir?

As-tu par hasard dans ton /home les fichiers de configuration d'une ancienne kde?

Hors ligne

#23 25-10-2012 10:57:41

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

Thuban a écrit :

Si je comprend bien kdm démarrage, mais après avoir précisé login et mot de passe, c'est écran noir?
As-tu par hasard dans ton /home les fichiers de configuration d'une ancienne kde?



merci pour ton intervention. pas exactement écran noir. après avoir entré dans la fenêtre kdm le login et mdp, la fenêtre s'efface, je reste avec l'arrière plan coloré et un curseur mobile. et c'est tout. aucun bureau n'apparaît alors que kde-full a été installé.
non, je ne dois pas avoir quoi que ce soit dans le /home, car c'est une installation fraîche, par un fichier netinstall, sur une partition vierge.


"Being is not doing"

Hors ligne

#24 26-10-2012 12:23:31

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

j'ai refait une installation, cette fois à partir du dvd 1 de wheezy, en demandant kde à l'installation. tout s'est passé sans problème, hormis bien sûr les miroirs debian qu'on ne peut jamais atteindre lors des installations. lorsque je lance le système, j'arrive sur la fenêtre kde. j'ai le choix entre defaut, plasma-destop et secours. pour les deux premiers, après avoir entré le login et mdp, j'arrive sur un fond d'écran avec une icône centrale type disque dur ou gestionnaire de fichiers. dès que je clique n'importe où, l'image se dilate, et je peux accéder à rien du tout. probablement en effet un problème de résolution graphique ou équivalent.

"Being is not doing"

Hors ligne

#25 28-10-2012 19:10:40

jeanmarc1
Adhérent(e)
Lieu : Vence (06)
Distrib. : Debian 11 en dual-boot sur Intel Nuc C7PJYH
Noyau : Linux 5.10.0-21-amd64
(G)UI : Gnome
Inscription : 09-09-2012
Site Web

Re : [RESOLU] problème de démarrage

finalement, j'ai installé une squeeze dans la partition, puis un plasma-desktop kde. entrée immédiate dans le système. tout est ok. upgrade vers un kde-full. tout est ok aussi. c'est donc bien un problème de wheezy. je vais me servir de ce kde squeeze, pour faire connaissance avec kde, et verrai le passage sous wheezy lorsque la version définitive sortira. je ne mets donc pas "résolu" pour l'instant.

"Being is not doing"

Hors ligne

Pied de page des forums